COLOUR TV
Cinemo GLCD4000HD
Cinemo GLCD4600HD
Grundig Helpline: 1800 509 394 Australia
Grundig Helpline: 0800 450 259 New Zealand
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
Power
Location
EN
This set operates on an AC mains supply, the voltage is as Position your set so that no bright light or sunlight falls
indicated on the label on the back cover. Never apply DC directly onto the screen. Care should be taken not to
power to the set. In the event of thunderstorms or power- expose the set to any unnecessary vibration, moisture,
cuts, please pull out the aerial and mains plugs.
dust or heat. Also ensure that the set is placed in a posi-
tion to allow a free flow of air. Do not cover the ventilation
openings on the back cover.
Warning
Cleaning
To prevent fire or shock hazard, do not expose the set to
rain or moisture. Do not rub or strike the Active Matrix LCD
with anything hard as this may scratch, mar, or damage the Unplug the set before cleaning the face of the LCD Screen.
Active Matrix LCD permanently.
Dust the set by wiping the screen and the cabinet with a
soft, clean cloth. If the screen requires additional cleaning,
use a clean, damp cloth. Do not use liquid cleaners or
aerosol cleaners.
Service
Never remove the back cover of the set as this can expose
you to very high voltage and other hazards. If the set does
not operate properly, unplug it and call your dealer.
Aerial
Connect the aerial cable to the socket marked +75 Ω on
the back cover. For the best reception an outdoor aerial
should be used.
To preserve the Environment,
do not rubbish.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
- All the functions can be controlled with the remote control handset.
- Some functions can also be adjusted with the buttons on the front panel of the set.
NUMBER BUTTONS
POWER
switches the set On from standby or Off to
standby.
i BUTTON
selects a menu.
PIP
Switches the sub picture On or Off.
(Programme Up/Down)
D / E
selects a programme or a menu item.
switches the set on from standby.
F / G (Volume Up/Down)
adjusts the volume.
adjusts menu settings.
OK
accepts your selection or displays the
ARC
select your desired picture format.
page stop in teletext mode.
SLEEP
sets the sleep timer.
select a sub page number in teletext mode.
current mode.
TELETEXT BUTTONS
These buttons are used for teletext.
For further details, see the ‘Teletext’ section.
MUTE
switches the sound On or Off.
Zap function
returns to the previously viewed programme.
SCAN
switches on the programme scan mode
through 4/16 sub pictures.
AV INPUT
Display the TV Guide in digital mode.
Select DTV, TV, AV1, AV2, AV3, AV4, S-VIDEO,
COMPONENT, PC-RGB, HDMI1, HDMI2 mode.
switches the set on from standby.
PAP (Picture And Picture)
selects the double window function.
PIP POSITION
relocates the sub picture in clockwise direction.
PSM (Picture Status Memory)
recalls your preferred picture setting.
SSM (Sound Status Memory)
recalls your preferred sound setting.
SIZE
adjusts the sub picture size.
STILL
freezes motion of the sub picture.
VCR, SAT, DVD
Switches to operating a GRUNDIG video
recorder, a GRUNDIG satellite receiver
or a GRUNDIG DVD player.
TIME
Display the time at the screen.
Selects a favourite programme add and delete
in digital mode.
Keep the appropriate button VCR, SAT, DVD
pressed down. Then press the appropri-
ate button
Note : The functions available depend on the
model of the device you are using.
Just try it out.
Before you use the remote
control handset, please
install the batteries.
- COLOURED BUTTONS
These buttons are used for teletext (only
TELETEXT models) or programme edit.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
- Your remote control handset is powered by two AA type batteries.
EN
- To insert batteries, turn the remote control handset over and
remove the battery cover.
- Put the two batteries into the compartment observing battery
polarity.
- Replace the cover.
To avoid damage from possible battery leakage, remove the bat-
teries if you do not plan to use the remote control handset for an
extended period time. Do not use batteries of differing age or type.
Always discard of batteries safely.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
- Shown is a simplified representation of the set.
- Here shown may be somewhat different from your set.
- This manual explains the features available on the Cinemo GLCD4000HD series.
6
5
4
3
1
2
9
7
8
1. MAIN POWER
switches the set On or Off.
6. POWER (r)
switches the set On from standby or On to standby.
2.
(Programme Up/Down)
selects a programme or a menu item.
switches the set On from standby.
D E
7. POWER/STANDBY INDICATOR (r)
illuminates red in standby mode.
illuminates green when the set is switched On.
/
3. F / G (Volume Down/Up)
adjusts the volume.
adjusts menu settings.
8. REMOTE CONTROL SENSOR
9. Front Light LED
4. MENU
selects a menu.
5. INPUT SELECT
selects DTV, TV, AV 1 , AV 2 , AV 3 , AV 4 , S-VIDEO,
COMPONENT, PC-RGB, HDMI1, HDMI2 mode.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
7
8
9
5
6
2
3
4
1
1. HDMI1 INPUT / HDMI2 INPUT / AUDIO INPUT / RGB 6. POWER CORD SOCKET
INPUT SOCKETS
Connect the set output socket of the PERSONAL
COMPUTER to this socket.
This set operates on an AC power. The voltage is indi-
cated on the Specifications page. Never attempt to
operate the set on DC power.
2. AUDIO INPUT / COMPONENT INPUT (480i / 480p /
576i / 576p / 720p / 1080i / 1080p) SOCKETS
7. AUDIO / VIDEO INPUT (AV4, S-VIDEO)
Connect video out from an S-VIDEO VCR to the S-
VIDEO input.
3. AERIAL SOCKET
Connect the audio/video out sockets of the VCR to AV
sockets of the set.
4. AUDIO / VIDEO SOCKET
Connect the audio/video out sockets of the VCR to AV
sockets of the set.
8. AUDIO / VIDEO OUTPUT SOCKET
9. SERVICE ONLY SOCKET
5. Digital Audio (OPTICAL)
Connect digital audio from various types of equipment.
Note : In standby mode, these ports will not work.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
- You can connect additional equipment, such as VCRs, camcorders etc. to your set. However please check with your
manufacturers instruction books for specific information. Make sure all connections are made with both your set and
additional appliance unplugged from the mains to avoid damaging your equipment. Here shown may be somewhat dif-
ferent from your set.
1
2
Connect to Aerial socket
Watching VCR
< Back panel of the set >
< Side panel of the set >
< Back panel of VCR >
- If you connect an S-VIDEO VCR to the S-VIDEO input, the pic-
ture quality is improved; compared to connecting a regular VCR
to the Video input.
Connect the RF out socket of the VCR to the aerial
socket on the back of the set.
- To avoid picture noise (interference), leave an adequate dis-
tance between the VCR and set.
Connect the aerial cable to the RF aerial in socket
of the VCR.
Store the VCR channel on a desired programme
number using the ‘Manual programme tuning’ sec-
tion.
Use the INPUT SELECT button on the remote control to select
AV 1 , AV 2 , AV 3 , AV 4 or S-VIDEO.
(If connected to S-Video, select the S-VIDEO external input
source.)
Select the programme number where the VCR
channel is stored.
Insert a video tape into the VCR and press the PLAY button on the
VCR. (See VCR owner’s manual)
Press the PLAY button on the VCR.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
3
4
Watching Cable TV
Watching external AV source
1
< Back panel of the set >
< Back panel of the set >
Camcorder
2
For cable TV
< Back panel of the external
equipment >
Video game set
< Cable Box >
- After subscribing for a local cable TV station and installing a con-
verter you can watch cable TV.
- For further information of cable TV, contact the local cable TV
station.
When connecting the set to an external source,
match the colours of AUDIO/VIDEO input jacks on
the set with the output jacks on the audio/video
equipment: Video = yellow, Audio (Left) = white,
Audio (Right) = red.
In using connection 1
Select programme number in programme switch of cable box.
Match the set programme with selected programme of cable box.
Use the INPUT SELECT button on the remote con-
Select your desired programme with the remote control for cable trol to select AV 1 , AV 2 , AV 3 , AV4 or S-VIDEO.
box.
Operate the corresponding external equipment.
See external equipment operating guide.
In using connection 2
Use the INPUT SELECT button on the remote control and select
AV 1 , AV 2 , AV 3 , AV4 or S-VIDEO.
Tune to cable service provided channels using the cable box.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Watching DVD
< Side panel of the set >
or
< Back panel of a DVD player >
How to connect
Connect DVD video inputs to Y, PB, PR of COMPONENT (DVD INPUT) and audio inputs to Audio sockets of AUDIO
INPUT.
How to use
Turn on the DVD player, and insert a DVD.
Use INPUT SELECT button on the remote control to select COMPONENT. Refer to the DVD player's manual for oper-
ating instructions.
• Component Input ports
You can get better picture quality if you connect DVD player with
component input ports as below.
Component ports of the
set
Y
PB
PR
Pr
R-Y
Cr
Y
Y
Y
Y
Pb
B-Y
Cb
PB
Video output ports
of DVD player
PR
10
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
6
Connecting HDMI
< Back panel of the set >
< DVI signal input only>
Connect the signal cable from the monitor output socket of HDMI Interface with HDCP Copy Protection enables all-
the DVD player or Set top Box to the HDMI INPUT socket digital rendering of video without the losses.
of the set.
This TV SET can receive the High-Definition Multimedia
Connect the audio cable from the PC to the AUDIO INPUT Interface(HDMI) or Input of Digital Visual Interface(DVI).
sockets of the set.
Press the INPUT SELECT button to select HDMI1,
HDMI2.
Switch on the HDMI, and the HDMI screen appears on the
set.
HDMI input signal : 480p-60Hz, 576p-50Hz, 720p-50Hz,
720p-60Hz, 1080i-50Hz, 1080i-60Hz.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
7
8
Connecting PC
Connecting Digital Audio
< Back panel of the set >
< Back panel of the set >
- Send the set’s audio to external audio equipment (stereo
system) via the Digital Audio Output (Optical)
Connect the signal cable from the monitor output socket
of the PERSONAL COMPUTER to the RGB INPUT sock-
et of the set.
Caution : Do not look into the optical output port. Looking
at the laser beam may damage your vision.
Connect the audio cable from the PC to the AUDIO
INPUT sockets of the set.
How to connect
Press the INPUT SELECT button to select PC-RGB.
Switch on the PC, and the PC screen appears on the set.
The set can be operated as the PC monitor.
Connect one end of an optical cable to the TV Digital
Audio (Optical) Output port.
Connect the other end of the optical cable to the digital
audio (optical) input on the audio equipment.
Note : Digital Audio Output works, when it’s inputted
HDMI signal to the set.
RGB input signal : 480p-60Hz, 576p-50Hz, 720p-50Hz,
720p-60Hz, 1080i-50Hz, 1080i-60Hz.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
1
2
4
On and Off
Programme selection
On screen language selec-
tion
Press the main power button to You can select a programme number
switch the set on.
Press the
or NUMBER buttons. button to select the Installation menu.
button and then use
D E
/
with the
D E
/
If the set is in standby mode, press
the POWER, buttons on the
remote control handset to switch it
Press the OK button and then use
button to select Language.
D E
/
D
E
/
on fully.
Press the OK button and then use
button to select your desired language.
D E
/
3
Press the POWER button on the
remote control handset.
Volume adjustment
All the on screen displays will appear in
the selected language.
Press the F / G button to adjust the
volume.
The set reverts to standby mode.
Press the
TV viewing.
button to return to normal
Press the main power button again
to switch the set off.
If you want to switch the sound off,
press the MUTE button.
You can cancel it by pressing the
MUTE, F / G,
button.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
- The dialogue between you and your set takes place on screen with an operator menu. The buttons required for the
operating steps are also displayed.
1
Press the
2
4
Change the setting of an item in the sub
button and then
button to display each button to select a menu item.
Press the OK button and then use
D E
/
use
D E
/
or pull-down menu with F / G or
.
D E
/
menu.
You can move to the higher level menu
with F button and to move to the lower
level menu press the G button.
3
Press the OK button to display the sub
menu or the pull-down menu.
Note : Menus may vary according to
input mode.
INFO
Settings
Preset list
Installation
PIP
1
2
3
4
5
Information
Select
and open
Exit
14
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
Sound mode
1
Language selection for dual language broadcast
Press the
the Settings menu.
button and then use
button to select
button to select
button to select
button to select
D E
/
If a programme received in two languages (dual lan-
guage).
Press the OK button and then use
Sound.
D E
/
DUAL A sends the primary broadcast language to the
loudspeakers.
DUAL B sends the secondary broadcast language to the
loudspeakers.
DUAL AB sends a separate language to each loud-
speaker.
Press the OK button and then use
Sound mode.
D E
/
Press the OK button and then use
the desired sound item.
D E
/
Press the
button to return to normal TV viewing.
Sound
Stereo
Sound mode
Balance
1
2
3
4
5
6
7
8
INFO
Settings
Mono A
Mono B
Flat
Sound
1
2
3
4
5
Settings
1
2
3
4
5
Defaults
Picture
Preset list
Installation
PIP
Equalizer
SPDIF format
Audio mode
SRS
Child lock
Timer
Off
Main
DTV option
Information
TV speaker
Exit
Select
and confirm
Exit
Back
Select
and open
Exit
Select
and open
Back
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Balance
Defaults
2
3
Press the button and then use
to select the Settings menu.
button Press the
button and then use
button to select the
D E
D
E
/
/
Settings menu.
Press the OK button and then use
to select Sound.
button Press the OK button and then use
button to select Sound.
button to select Defaults.
D E
D E
/
/
Press the OK button and then use
button
D E
/
Press the OK button and then use
to select Balance.
D E
/
Press the OK button and then use
sound item.
button to select the desired
D E
/
Press the OK button and then use F / G button
to make appropriate adjustments.
You can also recall a desired sound (Flat, Music, Movie, Speech
or User) with button on the remote control. The sound Flat,
Press the
ing.
button to return to normal TV view- Music, Movie and Speech are programmed for good sound
reproduction at the factory and cannot be changed.
Sound
Sound
Sound mode
Sound mode
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
Balance
Balance
Flat
Music
Defaults
Defaults
Equalizer
SPDIF format
Audio mode
SRS
Equalizer
SPDIF format
Audio mode
SRS
Movie
Speech
Off
User
Main
TV speaker
TV speaker
Select
and Edit
Exit
Back
Select
and confirm
Exit
Back
16
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
Equalizer
4
Press the
the Settings menu.
button and then use
button to select
button to select
button to select
D E
/
Press the OK button and then use
the desired sound item.
button to select
D E
/
Press the OK button and then use
Sound.
D E
/
Press the OK button and then use F / G button to make
appropriate adjustments.
Press the OK button and then use
Equalizer.
D E
/
Press the
button to return to normal TV viewing.
Note : This function works in the User mode.
Sound
Equalizer
Sound mode
100 Hz
1
1
Balance
2
200 Hz
2
Defaults
500 Hz
3
3
Equalizer
SPDIF format
Audio mode
SRS
User
1.2 kHz
4
4
5
6
7
8
3.0 kHz
Off
5
7.5 kHz
6
Main
12 kHz
7
Basic adjustment
8
Select
TV speaker
Exit
Select
and open
Exit
Back
and Edit
Back
17
Download from Www.Somanuals.com. All Manuals Search And Download.
SPDIF Format (in digital mode only)
Audio Mode (in digital mode only)
5
6
This function lets you select your preferred sound for
audio.
Press the
the Settings menu.
button and then use
button to select
button to select
button to select
button to select
D E
/
Press the OK button and then use
Sound.
D E
/
Press the
the Settings menu.
button and then use
button to select
button to select
button to select
button to select
D E
/
Press the OK button and then use
SPDIF Format.
D E
/
Press the OK button and then use
Sound.
D E
/
Press the OK button and then use
Dolby D or MPEG.
D E
/
Press the OK button and then use
Audio mode.
D E
/
Press the
button to return to normal DTV viewing.
Note :
Press the OK button and then
MPEG or Dolby D.
D
/ E
a : It’s available to use Dolby D or MPEG in Dolby Digital
Audio signal.
b : When it doesn’t apply the Dolby Digital Audio signal,
select the MPEG function to output the dolby digital
audio by SPDIF output.
Press the
button to return to normal DTV viewing.
Sound
Sound
Sound mode
Sound mode
1
1
2
3
4
5
6
7
8
Balance
2
Balance
Defaults
Equalizer
Defaults
3
Equalizer
4
SPDIF format
SPDIF format
Audio mode
SRS
5
Dolby D
MEPG
Audio mode
6
7
8
MPEG
Dolby D
SRS
TV speaker
TV speaker
Select
and confirm
Exit
Back
Select
and confirm
Exit
Back
18
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
SRS
TV Speaker
7
8
R
is a trademark of SRS Labs, Inc.
- Turn TV speakers off if using external audio
equipment.
TruSurround XT
- TruSurround XT technology is incorporated under license form SRS
Labs, Inc.
- Manufactured under license form Dolby Laboratories.
Press the button and then use
ton to select the Settings menu.
but-
but-
but-
D E
/
Press the
menu.
button and then use
button to select the Settings
D E
/
Press the OK button and then use
ton to select TV Speaker.
D E
/
Press the OK button and then use
button to select SRS.
D E
/
Press the OK button and then use
ton to select On or Off.
D E
/
Press the OK button and then use
Echo sound or TruSurround XT.
button to select Off, 3D
D
E
/
Press the
viewing.
button to return to normal DTV
When selecting Off option in SRS menu, SSM is automatically
changed Flat.
When selecting 3D Echo sound or TruSurround XT option in SRS
menu, SSM is automatically changed User.
Press the
button to return to normal DTV viewing.
Sound
SRS
TV Speaker
Sound mode
1
2
3
4
5
6
7
8
Off
1
Off
1
Balance
Defaults
Equalizer
3D Echo sound
On
2
3
2
TruSurround XT
SPDIF format
Audio mode
SRS
Main
TV speaker
Exit
Exit
Select
and open
Select
and open
Select
and confirm
Exit
Back
Back
Back
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Defaults
1
Press the
the Settings menu.
button and then use
button to select
button to select
button to select
D E
/
Press the OK button and then use
the desired picture option.
button to select
D E
/
Press the OK button and then use
Picture.
D E
/
Press the
button to return to normal TV viewing.
You can also recall a desired picture (Dynamic,
Standard, Mild or User) with button on the remote
control. The picture Dynamic, Standard, Mild are
programmed for good picture reproduction at the factory
and cannot be changed.
Press the OK button and then use
Defaults.
D E
/
Picture
Dynamic
Defaults
Brightness
Color
1
2
3
4
5
6
7
8
Standard
Mild
User
3
INFO
Settings
5
50
Sound
1
2
3
4
5
Settings
1
Contrast
Sharpness
Tint
Picture
Preset list
2
51
Child lock
Timer
Installation
3
PIP
4
Color temperature
Format
Warm
16:9
DTV option
Information
5
Exit
Select
and confirm
Exit
Back
Select
and open
Exit
Select
and open
Back
20
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
Brightness
Color temperature
2
3
Press the button and then use
button to select the Settings menu.
Press the
button and then use button to select the Settings menu.
D E
D
D
E
E
/
/
/
Press the OK button and then use
button to select Picture.
D E
/
Press the OK button and then use
button to select Picture.
Press the OK button and then use
ature.
button to select Color temper-
D E
/
Press the OK button and then use
button to select the desired picture option.
D E Press the OK button and then
button to select the desired colour
/
D / E
temperature.
To initialize values (reset to default settings), select the Normal option.
Only User function ;
Press the OK button and then use F / G
button to make appropriate adjustments.
a. Press the
b. Press the G button and then use
priate adjustments.
button in User.
D E
/
You can adjust picture contrast, bright-
ness, color, sharpness and tint (NTSC
input only) to the levels you prefer.
, F / G button to make appro-
D E
/
Picture
Picture
User
User
Defaults
Brightness
Color
Defaults
Brightness
Color
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
53
53
55
50
55
50
Contrast
Sharpness
Tint
Contrast
Sharpness
Tint
Color temperature
51
51
R
G
B
1
2
3
50
50
50
Cool
Warm
Color temperature
Format
Color temperature
Format
Warm
16:9
Normal
User
Select
and Edit
Exit
Back
Select
and Edit
Exit
Back
Select
and confirm
Exit
Back
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Format
4
Press the button and then use
Settings menu.
button to select the
D E
/
Press the OK button and then use
Picture.
button to select
D
D
E
/
/
Press the OK button and then use
Format.
button to select
E
16 : 9
H.ZOOM
Press the OK button and then use
appropriate adjustments.
button to make
D
E
/
Press the
button to return to normal DTV viewing.
• You can only select 16:9, 14:9, 4:3, ZOOM1, ZOOM2,
SPECTACLE, AUTO in TV, AV1, AV2, AV3, AV4, S-VIDEO,
COMPONENT [480i/576i] mode only.
• You can only select 16:9, H.ZOOM, V.ZOOM, HV.ZOOM in
DTV mode only.
V.ZOOM
HV.ZOOM
Picture
User
Defaults
Brightness
Color
1
2
3
4
5
6
7
8
53
55
50
Format
Contrast
Sharpness
Tint
16:9
51
H.ZOOM
V.ZOOM
HV.ZOOM
Color temperature
Format
Warm
16:9
Select
and confirm
Select
and open
Exit
Back
Exit
Back
22
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
Child lock
1
With the lock on, the display Child lock on appears on
the screen if any button on the front panel is pressed
while viewing the TV.
Press the
the Settings menu.
button and then use
button to select
button to select
button to select
D E
/
Press the OK button and then use
Child lock.
D E
/
Note : The display Child lock on will not appear on the
screen if any button on the front panel is pressed while
displaying the menus.
Press the OK button and then use
Off or On.
D E
/
Press the
button to return to normal TV viewing.
INFO
Settings
Sound
1
2
3
4
5
Settings
1
2
3
4
5
Child lock
Picture
Preset list
Installation
PIP
Off
On
1
2
Child lock
Timer
DTV option
Select
and confirm
Information
Exit
Select
and open
Exit
Select
and open
Exit
Back
Back
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Clock
1
- Auto time is set automatically from a digital channel sig-
nal.
Press the OK button and then use
Auto or Manual.
button to select
D E
/
Press the
the Settings menu.
button and then use
button to select
button to select
button to select
D E
Only Manual function; Press the G button and then
button to adjust hour and minute.
/
D / E
Press the OK button and then use
Timer.
D E
Press the
button to save.
/
Press the OK button and then use
Clock.
D E
/
Timer
INFO
Settings
Sound
1
Clock
1
Settings
1
2
3
4
5
Picture
2
Off Time
2
Preset list
Installation
PIP
Child lock
On Time
3
3
4
5
Clock
Timer
Time zone
4
Auto E 18:26
D
DTV option
D.Saving
5
Information
Exit
Select
and Edit
Exit
Exit
Select
and open
Exit
Select
and open
Select
and open
Back
Back
Back
24
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
On/Off Time
2
The off timer automatically switches the set to standby at the preset
time.
Only On time function; Press the G button
and then button to adjust volume level
and program number.
D / E
Press the
menu.
button and then use
button to select the Settings
D E
/
Press the
to save.
Press the OK button and then use
button to select Timer.
D E
/
Note :
a.In the event of power interruption (disconnec-
tion or power failure), the clock must be reset.
b.Two hours after the set is switched on by the
on time function it will automatically switch
back to standby mode unless a button has
been pressed.
Press the OK button and then use
or On Time.
button to select Off Time
D E
/
Press the OK button and then
button to select On.
D / E
To cancel Off/On Time function, press the
Off.
button to select
D / E
c.Once the on or off time is set, these functions
operate daily at the preset time.
d.Off Timer function overrides On Timer func-
tion if they are set to the same time.
e.The set must be in standby mode for the On
Timer to work.
Press the OK button and then
button to adjust the hour.
D / E
Press the G button and then
button to adjust the minute.
D / E
Timer
Settings
Sound
1
Clock
1
2
3
4
5
Picture
2
Off Time
On Time
Time zone
D.Saving
Child lock
3
On time
Timer
4
04:57
TV 3
VOL
30
On
DTV option
5
Select
and Edit
Exit
Back
Exit
Exit
Select
and open
Select
and open
Back
Back
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Time zone (in digital mode only)
D. Saving (in digital mode only)
3
4
The digital channel signal includes information for the current time
provided by the broadcasting station.
Press the button and then use
ton to select the Settings menu.
but-
but-
but-
D E
/
Press the
menu.
button and then use
button to select the Settings
D E
Press the OK button and then use
ton to select D. Saving.
/
D E
/
Press the OK button and then use
Press the OK button and then use
button to select Timer.
D E
Press the OK button and then use
ton to select On or Off.
/
D E
/
button to select Time zone.
D E
/
Press the
viewing.
button to return to normal DTV
Press the OK button and then
button to select your viewing
D / E
area time zone : NSW/ACT, VIC/TAS, QLD, SA, WA, NT, Auto
time zone.
Press the
button to return to normal DTV viewing.
Time zone
NSW / ACT
VIC / TAS
QLD
1
2
3
4
5
6
7
Timer
Timer
Clock
Clock
1
2
3
4
5
1
2
3
4
5
D. Saving
Off Time
On Time
Time zone
D.Saving
Off Time
SA
Off
On
1
2
On Time
Time zone
D.Saving
WA
NT
Select
and confirm
Auto time zone
Exit
Exit
Exit
Select
and open
Select
and open
Select
and open
Exit
Back
Back
Back
Back
26
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
Rating
1
Parental Control can be used to block specific channels,
ratings and viewing sources.
Press the OK button to enter the password as requested.
The TV is set with the initial password “0-0-0-0”.
Press the
the Settings menu.
button and then use
button to select
button to select
button to select
D E
/
Press the
Press the
button to select type of ratings to block .
D / E
Press the OK button and then use
DTV option.
button to return to normal DTV viewing.
D E
/
Press the OK button and then use
Rating.
D E
/
INFO
DTV option
Settings
No
block
R & above
AV & above
MA & above
Sound
Picture
Settings
1
Rating
1
1
2
3
4
2
3
4
5
Channel list
Installation
PIP
Set password
Favorite
2
3
4
5
Child lock
Timer
DTV option
M
& above
PG & above
& above
Block all
Caption
G
Information
Exit
Back
Select
and open
Exit
Back
Select
and open
Exit
Select
and confirm
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Rating menu option
2
- No Block
All programs can be watched because there is no age limitation.
- R & Above (Restricted 18+)
Programs are blocked for children under the age of 18.
- AV & Above (Adult Audience strong violence 15+)
This program contains the strong violent contents. Therefore, programs are blocked for children under the age of 15
- MA & Above (Mature Adult Audience 15+)
Programs are blocked for children under the age of 15.
- M & Above (Mature Audience 15+)
Programs are blocked for children under the age of 15.
- PG & Above (Parental Guidance Recommended)
This programs contains unsuitable materials that parents want to prevent their children from watching.
- G & Above (General Audience)
This programs is designed to be appropriate for all ages.
- Block All
All programs are blocked without considering the age level.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
Set password
3
Change the password by inputting a new password
twice.
Press the OK button to enter the password as request-
ed.
Press the
the Settings menu.
button and then use
button to select
button to select
button to select
The TV is set with the initial password “0-0-0-0”.
D E
/
Press the OK button and then enter a four digit pass-
word.
Press the OK button and then use
DTV option.
D E
/
Enter it again when requested.
Press the OK button and then use
Set password.
D E
/
Press the
button to return to normal DTV viewing.
Settings
DTV option
Sound
1
2
3
4
5
New Code
Rating
1
2
3
4
Picture
----
Set password
Favorite
Child lock
Timer
Confirm Code
----
Caption
DTV option
Exit
Exit
Select
and open
Select
and confirm
Back
Back
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Favorite
Caption
4
5
This function lets you select your favourite programmes
directly.
Press the
the Settings menu.
button and then use
button to select
button to select
button to select
button to select
D E
/
Press the
the Settings menu.
button and then use
button to select
button to select
button to select
button to select
D E
Press the OK button and then use
DTV option.
/
D E
/
Press the OK button and then use
DTV option.
D E
Press the OK button and then use
Caption.
/
D E
/
Press the OK button and then use
Favorite.
D E
Press the OK button and then use
On or Off.
/
D E
/
Press the OK button and then use
On or Off.
D E
Press the
button to return to normal DTV viewing.
/
Press the
button to return to normal DTV viewing.
Settings
DTV option
DTV option
Sound
1
2
3
4
5
Rating
1
Rating
No block
No block
Off
1
2
3
4
Picture
Set password
Favorite
Set password
Favorite
2
3
4
Off
On
Off
Child lock
Timer
Off
Caption
Caption
On
DTV option
Exit
Exit
Back
Exit
Back
Select
and open
Select
and confirm
Select
and confirm
Back
30
Download from Www.Somanuals.com. All Manuals Search And Download.
- This function enables you to delete or skip the stored programmes. Also you can move some stations to other pro-
gramme numbers or insert a blank station data into the selected programme number.
EN
Press the
button and then use
button to select the Preset list
Deleting a programme
Select a programme to be
Moving a programme
Select a programme to be moved with the
D
E
/
menu.
or F / G button.
deleted with the
button.
or F / G
D E
/
D E
/
Press the OK button to display the
Preset list menu.
Press the
button.
Press the
button twice.
Move the programme to the desired pro-
gramme number with the
ton.
The selected programme is
deleted, all the following pro-
grammes are shifted up one
position.
or F / G but-
D E
/
Press the
function.
button again to release this
< Analogue mode edit >
Preset list
0
-----
-----
8
9
-----
-----
-----
-----
-----
-----
-----
-----
16
17
18
19
20
21
22
23
-----
-----
-----
-----
-----
-----
-----
-----
1
2
3
4
5
6
7
-----
-----
-----
-----
-----
-----
-----
INFO
10
11
12
13
14
15
Settings
1
2
3
4
5
Preset list
Installation
PIP
Information
Select
and confirm
Edit
Exit
Delete
Move
Select
and open
Exit
Back
31
Download from Www.Somanuals.com. All Manuals Search And Download.
1
Select a programme to be deleted with the
2
Press the
button to select Edit name.
D E
/
or F / G button.
D E
/
Press the OK button.
Press the
nel settings menu.
button to display the Edit chan-
Press the button. You can use a blank, +, -, the numeric 0 to 9 and
D
the alphabet A to Z.
With the button you can select in the opposite direction.
E
Select the position by pressing the F / G button and then take your
choice of the second character, and so on.
Press the
button to select Type.
D E
/
Press the OK button and then
CABLE.
button to select V/UHF or
D
/ E
Edit channel settings (
)
Edit channel settings (
)
Edit name
Type
Edit name
Type
1
2
3
4
5
1
2
3
4
5
VHF/UHF
VHF/UHF
21
VCABLE
Channel entry
Finetuning
TV standard
Channel entry
Finetuning
TV standard
21
0
0
DK
DK
Select
and open
Select
and confirm
Exit
Back
Exit
Back
32
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
3
Normally fine tuning is only necessary if reception is poor.
4
Press the
button to select TV standard.
D
E
/
Press the
button to select Finetuning.
D E
/
Press the OK button and then use
select BG, I, DK, M.
button to
D
E
/
Press the OK button.
Press the F / G button to fine tune for the best picture
and sound.
Edit channel settings (
)
Edit channel settings (
)
Edit name
1
Edit name
1
Type
Type
VHF/UHF
VHF/UHF
21
2
3
4
5
2
3
4
5
Channel entry
Finetuning
TV standard
Channel entry
Finetuning
TV standard
21
BG
I
DK
D
M
0
DK
Select
and confirm
Select
and Edit
Exit
Back
Exit
Back
33
Download from Www.Somanuals.com. All Manuals Search And Download.
- Stations can be tuned using automatic or manual modes.
- All stations that can be received are stored by this method. It is recommended that you use auto programme during
installation of this set.
Station search
1
Press the OK button to begin auto programming.
All receivable stations are stored.
Press the
the Installation menu.
button and then use
button to select
button to select
button to select
D E
/
To stop auto programming, press the
button.
Press the OK button and then use
Station search.
D E
/
When auto programming is completed, the Preset list
menu appears on the screen. See the ‘Preset list’ section
to edit the stored programme.
Press the OK button and then use
D E
/
TV search, DTV search, All search.
Press the
button to return to normal TV viewing.
Press the OK button.
Note : The auto search operation all data is deleted.
Press the OK button to begin auto programming.
Installation
INFO
Language
Station search
PC Control
WXGA
1
2
3
4
5
6
Settings
1
2
3
4
5
Station search
Preset list
Installation
PIP
All search
TV search
DTV search
All search
1
2
3
5
5%
VGA
Information
Front Light
Select
and open
Exit
Stop
Exit
Select
and open
Select
and open
Exit
Back
Back
34
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
Front Light
2
You can switch Front Light LED on or off.
Press the OK button and then use
Light On, Light Off.
button to select
D E
/
Press the button and then use
the Installation menu.
button to select
button to select
D E
/
Press the OK button.
Press the OK button and then use
Front Light.
Press the OK button to begin auto programming.
D E
/
Installation
INFO
Language
Station search
PC Control
WXGA
1
2
3
4
5
6
Settings
Preset list
Installation
PIP
1
2
3
4
5
Front Light
Light On
1
Light Off
2
VGA
Information
Front Light
Select
and open
Exit
Exit
Select
and open
Select
and open
Exit
Back
Back
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Sleep timer
You don’t have to remember to switch the set off before
you go to sleep. The sleep timer automatically switches
the set to standby after the preset time has elapsed.
Note :
a.To view the remaining sleep time, press the -/-- button
once.
Press the -/-- button to select the number of minutes. The
b.To cancel the sleep time, repeatedly press the -/-- but-
- - - min
display ‘
’ will appear on the screen, followed by 10,
ton until the display ‘
’ appears.
- - - min
20, 30, 60, 90, 120, 180 and 240. The timer begins to
count down from the number of minutes selected.
c.When you switch the set off, the set releases the preset
sleep time.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
PC Setup
EN
You can adjust horizontal/vertical position, clock, phase, Phase
and auto-configure, reset as you prefer.
This function allows you to remove any horizontal noise
and clear or sharpen the image of characters.
Press the
button and then use
button to select
D E
/
the Installation menu.
Press the OK button and then use
PC Control.
Auto-configure
button to select This function is for the automatic adjustment of the screen
position, clock and phase. The displayed image will disap-
D E
/
Press the OK button and then D / E button to select the pear for a few seconds while the Auto-configuration is in
desired picture item.
Press the F / G button to make appropriate adjustments.
progress.
Reset
This function allows you to return to the good picture
reproduction programmed at the factory and cannot be
changed.
H-Position / V-Position
This function is to adjust picture to left/right and up/down
as you prefer.
Note : Some signal from some graphics boards may not
function properly. If the results are unsatisfactory, adjust
your monitor’s position, clock and phase manually.
Clock
This function is to minimize any vertical bars or stripes vis-
ible on the screen background. And the horizontal screen
size will also change.
Press the OK button to store it for the PC monitor picture.
Press the
button to return to PC mode.
WXGA or VGA (Only RGB mode)
a : When the set is inputted WXGA signal, select the desired WXGA resolution.
PC Control
Installation
WXGA
H-POS.
1
0
0
Language
Station search
PC Control
WXGA
1
2
3
4
5
1024X768
1
2
3
4
V-POS.
Clock
Phase
Auto
2
3
4
5
6
1280X768
1360X768
1366X768
50
50
VGA
Reset
Select
and confirm
Exit
Exit
Exit
Select
and open
Select
and Edit
Back
Back
Back
37
Download from Www.Somanuals.com. All Manuals Search And Download.
- PIP lets you view 2 different inputs (sources) on your monitor screen at the same time. One source will be large, and
the other source will show a smaller inset image.
1
Watching PIP
Press the PIP button to show the sub picture.
• Each press of PIP button changes the screen display
as shown below.
DW2
DW1
PIP
POP
MAIN
DTV
O
TV
X
AV1 AV2 AV3
AV4 S-VIDEO
PC-RGB
COMP.
O
HDMI1 HDMI2
SUB
O
O
X
O
O
O
X
O
O
O
O
X
O
O
O
O
O
X
O
O
O
O
O
O
O
O
O
O
O
O
TV
O
X
O
O
O
O
O
O
AV1
AV2
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
AV3
O
O
AV4
O
S-VIDEO
38
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
Moving the PIP
2
3
Press the POS button.
PIP Audio Input
Press the POS button repeatedly until desired position is
achieved. The sub pictures move clockwise.
PIP mode - main and sub picture audio select.
Press the
PIP menu.
button and then
button to select the
D / E
Press the OK button and then
Audio Input.
button to select
D / E
Press the OK button and then
Main or Sub.
button to select
D / E
4
Press the
button to return to normal TV viewing.
Sub picture size
Press the SIZE button to select the desired sub picture
size.
The sub picture appears as 1/9 size of the main picture,
followed by 1/16.
PIP
Mode
1
PIP
TV
Input
2
3
4
5
Format
4:3
Main
Position
B
Sub
Main
Audio Input
Exit
Select
and confirm
Back
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Information
TV Guide
1
2
- This function shows the present screen information.
- This function shows the interactive programme guide.
Press the
Information menu.
button and then
button to select the Press the
button and then
button to select the
button to select
/ E
D / E
D / E
Information menu.
Press the OK button and then
Information.
button to select Press the OK button and then
Information.
D
/ E
D
Press the OK button.
Press the OK button.
The service information appears on screen.
The TV Guide information appears on screen.
Press the button to return to normal DTV viewing.
Press the
button to return to normal DTV viewing.
Note :
Press the SCAN button to display the DTV Guide.
a When you press the OK button, Signal Strength
aren’t displayed on the information OSD.
b It’s disappeared after a while.
Seven Network
SD/MPEG
576i 16x9
Ch.77
7 Guide
3
SD/MPEG
18:05
NOW 18:00 ~ 18:30
SEVEN NEWS
SBS SBS DIGITAL 1
JENNIFER KEYTE presents to day’s news with ROB GELL updating
the weather. Sport is with TIM WATSON. Ws
Now Toyota World Sport
Next English Premier League...
NOW 18:30 ~ 19:40
HEARTBEAT
PG
Three farm children are left orphaned, leaving Steve to help the old-
set child fight a custody battle. Vernon opens a campsite, but it is
David who is left to entertain the campers.WS
40
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
Teletext (or TOP text) is an optional function, therefore only 1. Enter the desired page number as a three digit number
a set with the teletext system can receive the teletext
broadcast.
with the NUMBER buttons. If during selection you
press a wrong number, you must complete the three
digit number and then re-enter the correct page num-
ber.
Teletext is a free service broadcast by most TV stations
which gives up-to-the-minute information on news, weath- 2. The
er, television programmes, share prices and many other
topics.
button can be used to select the preceding
D E
/
or following page.
Programming a colour button in LIST mode
The teletext decoder of this TV can support the SIMPLE, If the TV is in SIMPLE text, TOP text or FASTEXT mode,
TOP and FASTEXT systems. SIMPLE (standard teletext) POS press the button to switch to LIST mode.
consists of a number of pages which are selected by
directly entering the corresponding page number. TOP and Four teletext page numbers of your choice can be colour
FASTEXT are more modern methods allowing quick and coded and easily selected by pressing the corresponding
easy selection of teletext information.
coloured button on the remote control handset.
1. Press a coloured button.
2. Using the NUMBER buttons, select the page you wish
to programme.
Switch on/off
3. Press the OK button. The selected page is stored as
the selected page number, blinking once to confirm
this. From now on, you can select this page with the
same coloured button.
Press the TEXT button to switch to teletext.
The initial page or last page appears on the screen.
Two page numbers, TV station name, date and time are
displayed on the screen headline. The first page number 4. The three other coloured buttons are programmed in
indicates your selection, while the second shows the cur-
rent page displayed.
this way.
Press the TEXT button to switch off teletext. The previous TOP text (option)
mode reappears.
The user guide displays four fields-red, green, yellow and
blue at the bottom of the screen. The yellow field denotes
the next group and the blue field indicates the next block.
SIMPLE text
Page selection
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Block / group / page selection
1. With the blue button you can progress from block to Selects double height text.
SIZE
block. Press this button to enlarge the top half of the page.
2. Use the yellow button to proceed to the next group with Press this button again to enlarge the bottom half of the
automatic overflow to the next block.
3. With the green button you can proceed to the next Press this button again to return to the normal display.
page.
existing page with automatic overflow to the next
group.
Alternatively the button can be used.
Stops the automatic page change which will occur if a tele-
D
4. The red button permits to return to previous selection. text page consists of 2 or more sub pages. The number of
Alternatively the button can be used.
E
sub pages and the sub page displayed is, usually, shown
on the screen below the time. When this button is pressed
the stop symbol is displayed at the top left-hand corner of
Direct page selection
Corresponding to the SIMPLE teletext mode, you can the screen and the automatic page change is inhibited.
select a page by entering it as a three digit number using To continue press this button again.
the NUMBER buttons in TOP mode.
PAP
Displays the teletext pages superimposed on the TV pic-
FASTEXT
ture.
The teletext pages are colour coded along the bottom of To switch the TV picture off press this button again.
the screen and are selected by pressing the correspond-
- --
/
ing coloured button.
In the teletext mode, press this button to select a sub page
number. The sub page number is displayed at the bottom
of the screen. To hold or change the sub page, press the
Special teletext functions
RED / GREEN,
or NUMBER buttons.
Press this button again to exit this function.
D E
/
SCAN
Press this button to display concealed information, such as
solutions of riddles or puzzles.
Press this button again to remove the information from the
display.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
RGB Mode / HDMI Mode
Horizontal
Frequency (KHz)
Vertical
Frequency (Hz)
MODE
Resolution
70.0
70.0
85.0
60.0
72.0
75.0
85.0
56.0
60.0
72.0
75.0
85.0
60.0
70.0
75.0
85.0
60.0
70.0
75.0
85.0
60.0
75.0
85.0
60.0
60.0
60.0
640X350
720X400
31.5
31.5
37.9
31.5
37.8
37.5
43.2
35.1
37.9
48.0
46.9
53.7
48.4
56.4
60.0
60.0
63.9
75.0
79.9
91.1
47.7
60.1
68.5
49.0
49.0
75.0
DOS
Note:
a. If the set is cold, there may be a small “flicker” when the
set is switched on. This is normal, there is nothing wrong
with the set.
b. If possible, use the VESA 1,024x768@60Hz video mode
to obtain the best image quality for your LCD monitor. If
used to PC vertical frequency 85Hz, some noise can be
seen when PIP is on. In this case, set the PC vertical fre-
quency to 60Hz. The set has been pre-adjusted to the
mode VESA 1,024x768@60Hz.
c. Some dot defects may appear on the screen, like Red,
Green or Blue spots. However, this will have no impact
or effect on the monitor performance.
d. Do not press the LCD screen with your finger for a long
time as this may produce some temporary distortion
effects on the screen.
e. When the PC screen appears on the set, a message
may appear on the screen, and the message will differ
according to the Window system version (Win98, 2000).
If a message appears click “Next” until the message fin-
ishes.
f. If the message “Out Of Range” appears on the screen,
adjust the PC as in the ‘Displayable Monitor
Specification’ section.
640X480
800X600
VGA
SVGA
1024X768
XGA
1280X1024
1280X768
SXGA
WXGA
UXGA
1360X768
1366X768
1600X1200
(Synchronization input form : separate)
43
Download from Www.Somanuals.com. All Manuals Search And Download.
GUARANTEE
Please keep your receipt as proof of purchase. This product is warranted for any defect in
materials or workmanship for three years after the original date of purchase. This product is
for normal domestic and office use only. This warranty does not cover damage from misuse
or neglect, accidental damage, vermin infestation, excessive voltages such us lightning or
power surges or any alteration that affects the performance or reliability of the product.
If guarantee is required please contact the Grundig Helpline 1800 509 394 within
Australia or 0800 450 259 within New Zealand. Have your receipt of purchase on hand.
This guarantee is subject to the following provisions :
O
It is only valid within boundaries of the country of purchase;
O
The product must be correctly assembled and operated in accordance with the instructions
contained in this manual;
O
This product must be used solely for domestic purposes;
O
The guarantee does not cover accidental damage;
O
The guarantee will be rendered invalid if the product is resold or has been damaged by
inexpert repair;
O
The manufacturer disclaims any liability for incidental or consequential damaged.
This guarantee is in addition to, and does not diminish, your statutory or legal rights.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
45
Download from Www.Somanuals.com. All Manuals Search And Download.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptoms
No picture, no sound
EN
Sound OK, poor picture
Picture OK, poor sound
Picture blurred
Lines or streaks in picture
Poor reception on some channels
No colour
Poor colour
Remote control does not work
Incorrect position
Vertical bars or stripes on background
Horizontal noise
Signal Cable message appears
Check these items and try to adjust these
The mains plug-(plugged in and switched on)
Is the TV switched on
Try another channel (weak signal)
Check aerial (plugged into TV?)
Check aerial (broken lead?)
Check aerial
Check for local interference
Adjust contrast
Adjust brightness
Adjust colour
Adjust volume
Check the batteries in remote control
Check Audio/Video sockets (VCR only)
Auto-configure or adjust the H/V position
Auto-configure or adjust Clock
Auto-configure or adjust Clock Phase
Is the Signal Cable connected or loose
47
Download from Www.Somanuals.com. All Manuals Search And Download.
PO BOX 6287
Silverwater NSW 1811
Grundig Helpline: 1800 509 394 Australia
Grundig Helpline: 0800 450 259 New Zealand
P/NO : MAN07GDP109
(GPN07MA030A, GRUNDIG)
Download from Www.Somanuals.com. All Manuals Search And Download.
|