LCD TV WITH DVD
PLAYER
GLCD1906HDV
GLCD1906HDVW
GLCD2206HDV
GLCD2206HDVW
The Gold Technical Support Line: 1902 215 259
Personal Product Support
(Charges will apply at $2.95 per minute)
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Introduction …………………………………..….………1
Safety Instructions ……………………………………...3
Unpacking ………………………………………..…..…5
Wall Mount Bracket Installation Guidelines ……..……6
View of TV/Monitor ………..………………………….…7
Remote Control …………………..………………….…… 9
Installation and Connection …………….…………..…….12
TV/Monitor Screen Operation …….……………………13
TV Channel Menu and Adjustment …….……….….….15
DVD Player Operation ….……………..…………………23
Other Operation ….……………………………………..34
Notes …………….……………………………………….37
Maintenance …….………………………………………38
Specifications ….………………………………………..39
Display Modes .………………………………………….41
Warranty ..………………………………….……………..42
- 2 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety instructions
1. Do not use this apparatus near water.
2. Clean only with a dry cloth.
3. Do not block any ventilation openings. Install in accordance with the
manufacturers instructions.
4. Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
5. Protect the power cord from being walked on or pinched particularly at
plugs convenience receptacles, and the point where they exit from the
apparatus.
6. Only use attachments/accessories specified by the manufacturer.
7. Unplug this apparatus during lightning storms or when unused for long
periods of time.
8. Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as
power-supply cord or plug is damaged, liquid has been spilled or objects
have fallen into apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
9. The apparatus should not be exposed to dripping or splashing and no
objects filled with liquids, such as vases, should be placed on the
apparatus.
10. The apparatus should not be exposed to dripping or splashing and no
objects filled with liquids, splashing and no objects filled with liquids such
as vases, should be placed on the apparatus.
11. If the television is to be built into a compartment or similar enclosed space,
the minimum distances must be maintained. Heat build-up can reduce
the service life of your television, and can also be dangerous.
Installation notes
ƒ
This TV can be connected to AC 100-240 Volts. 50/60 Hz. Never connect
to a DC supply or any other power supply.
ƒ
Locate the TV in the room where light does not strike the screen.
- 3 -
Download from Www.Somanuals.com. All Manuals Search And Download.
ƒ
Total darkness or a reflection on the picture screen can cause eyestrain.
Soft and indirect lighting is recommended for comfortable viewing.
ƒ
ƒ
Allow enough space between the TV and the wall to permit ventilation.
Avoid excessively warm locations to prevent possible damage to the
cabinet or premature component failure.
ƒ
Do not cover the ventilation openings when using the TV.
Additional Safety notes
ƒ
Never tamper with any components inside the TV, or any other
adjustment controls not mentioned in this manual.
ƒ
All LCD TVs are high voltage instruments. When you clean up dust or
water drops on the LCD PANEL or CABINET, the power cord should be
pulled out from the receptacle, then wipe the TV with a dry soft cloth.
During thunder and lighting, unplug the power cord and antenna cord to
prevent damage to your TV.
ƒ
ƒ
All repairs to this TV should only be performed by qualified TV service
personnel.
- 4 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Unpacking
___________________________________________
Please make sure that the following items are included with your LCD
TV/Monitor. If any item is missing, please contact the warranty line.
TFT LCD TV/ Monitor
Operation manual
Remote control
DC adaptor
RCA cable
Power cord
Car Cord
- 5 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Wall Mount Bracket Installation Guidelines
____________________________________________
1. Place the “LCD TV” on a solid surface. Use soft material to place over
the front screen to avoid any damage.
2. Remove the 5 screws（①②③④⑤）from the unit and take away the stand
(Refer picture 1).
(picture 1)
3. Using the plastic cover that came with the LCD screw in the 5 screws to
fix the plastic cover on the bottom of the unit (Refer picture 2).
(picture 2)
4. Use 4 screws to fix the TV on the wall mount bracket .Please find there
are 4 VESA holes on the back of the unit (Refer picture 3).
(picture 3)
- 6 -
Download from Www.Somanuals.com. All Manuals Search And Download.
I. View of the TV/Monitor
Front view
Back view
12
G
LC
D
2206HDVW
22,,Widescreen LCD TV ith DVD Player
W
DC
12V 5A Adaptor
Use only the adaptor type NU60-2120500-I1
Other adaptor may damage the unit
N14119
G
Gr
r
undig
undig
W
Wa
a
r
r
r
ra
a
nty:18
0
0
0
0
50
450
9
39
259
4
A
N
ustr
ew Ze
a
lia
alan
3
4
MADE INPRC
nty: 08
d
O
D
U
N
R
2008/05
5
6
7
8
9
10
11
15
16
13 14
18
21
24
23
17
19 20
22
- 7 -
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Remote sensor
12. DVD disc slot
To load disc for playback.
13. DC IN jack
To connect DC 12V power supply
To receive remote signal from
remote control.
2. Power button / power indicator
To switch on/off the unit, in power
on mode the indicator will turn to
blue and in standby mode the
indicator will turn to red.
14. HDMI input jack
15. VGA input jack
To connect with PC.
16. YPbPr input jack
17. S-Video input jack
18. Video input jack
19. Audio input (Left) jack
20. Audio input (Right) jack
21. PC audio input jack
3. PLAY/PAUSE button
To play/pause playback of disc.
4. STOP button
To stop playback of disc.
5. EJECT/CLOSE button
To eject a disc from the disc slot or 22. Earphone jack
close a disc to the disc slot.
23. RF IN jack
6. VOL- button
To connect the external aerial.
To decrease the volume level.
24. COAXIAL OUT
7. VOL+ button
To connect the input socket on your
To increase the volume level.
8. CH- button
surround sound system, this jack
only output the digital signal from
DVD.
To select channels downward in
TV mode.
9. CH+ button
To select channels upward in TV
mode.
10. MENU button
To enter menu mode.
11. SOURCE button
To select input source.
- 8 -
Download from Www.Somanuals.com. All Manuals Search And Download.
II. Remote Control
- 9 -
Download from Www.Somanuals.com. All Manuals Search And Download.
(1) Remote control keys function
1. STANDBY: To switch on/off the unit.
2. Numeric buttons: To select a channel by
number input or input numbers in menus.
21. REPEAT: To repeat play in DVD mode
and display yellow subject in Teletext
mode.
3. CH.LIST: To show the channel list and used 22. A-B: To repeat A-B playback or display
to input the track number for discs that have
more than 9 tracks.
blue subject in Teletext mode.
23. D.DISP: To display track information in
DVD mode.
4. ASPECT: To switch the size of the picture.
5. VOL+/-: To adjust the volume up or down.
6. DISPLAY: To display the source and
channel’s information.
24. GOTO: To find a play point in DVD
mode.
25. REVEAL: To reveal or hide the words in
Teletext mode and select angle in DVD
mode (Angle function depends on DVD
discs).
7. Navigation buttons: To select the items of
on-screen menus.
8. LCD MENU: To display LCD OSD Menu
9. SOURCE: To display INPUT source.
10. P.MODE: To select the picture mode.
11. PLAY/PAUSE: To play/pause the track
being played in DVD mode or show the
favourite list in TV mode.
26. SUBPAGE: To access sub-coded page
in Teletext mode and zoom function of
DVD playback.
27. LANG: To select a program’s language
in DVB mode and DVD mode (where
available).
12. STOP: To stop DVD playback.
13. TEXT: To switch on/off teletext in TV mode 28. SUBTITLE: To switch the dialogue at the
and skip to previous track in DVD mode.
14. HOLD: Hold on or off for current page
display in TELETEXT mode and skip to
next track in DVD mode.
bottom of the screen.
29. >I: Slow motion playback in DVD mode.
30. EPG: To show the electronic program
Guide menu
15. INDEX: To display the index page in
Teletext mode and fast backward playing
in DVD mode.
31. S.MODE: To select different sound
mode.
32. SLEEP: To set the unit to turn off
automatically after a set period of time.
33. EXIT: To display the setup menu in DVD
mode or exit the current mode.
34. CH+/-: To change channels up or down.
35. NICAM: To turn on/off Nicam in TV
mode.
16. SIZE: To change the display size in
teletext mode or fast forward playing in
DVD mode.
17. D.MENU: To display DVD-disc menu.
18. TITLE: To display DVD title menu.
19. PROG: To enter program setting in DVD
mode,display red subject in Teletext mode 36. CYCLE: Switch between the current
and select DVB program in DVB mode.
20. INTRO: To INTRO play (play the first 10
seconds of each track) when playing CD
discs and display green subject in Teletext
mode.
channel being viewed and the last
channel viewed in TV mode.
37. EJECT: To eject/close the disc in DVD
mode.
38. MUTE: To turn the sound on and off.
- 10 -
Download from Www.Somanuals.com. All Manuals Search And Download.
(2) Remote control battery installation and cautions
Replace battery by following the below steps:
Requires two AAA batteries.
1. Open the battery cover as shown below:
2. Install the battery into the battery tray.
3. Close the battery cover
Caution:
1. Keep batteries out of children’s reach.
2. Don’t attempt to recharge, short-circuit, disassemble, heat or throw the
batteries into the fire.
3. Always replace both batteries at the same time. Never mix new and old
batteries or batteries of a different type.
4. If you don’t intend to use the remote control for an extended period,
remove the batteries to prevent possible leakage and corrosion.
Notes:
1. Do not drop, apply shock or step on the remote control.
2. Do not spill water on the remote control.
3. Do not use the remote control for other equipment at the same time.
4. If the TV does not operate when operating the remote control from a
close range, you need to replace the batteries.
See above for directions on replacing batteries.
- 11 -
Download from Www.Somanuals.com. All Manuals Search And Download.
III. Installation and Connection
Connect the LCD TV/monitor
GLCD2206HDV
,
,
22 Widescreen LCD TV With DVD Player
D
C
1
2
V
5
A
A
d
a
p
t
o
r
Use onlythe adaptor type NU60-2120500-I1
Other adaptor may damage the unit
N14119
Gru
Grun
n
d
di
i
g
g
Warr
Warr
a
an
n
t
y: 1800 509 394 Austral
Z
i
a
MADE IN PRC
t
y
:
0
8
0
0
4
5
0
2
5
9
N
e
w
e
a
l
a
n
d
C
A
A
P
R
D
C
U
O
K
A
N
R
L
A
I
2
0
0
8
/0
3
1. Connect the TV RF source to the RF IN port. TVRF signal including:
Receiving antenna /satellite TV/CATV net. You can use 75Ω coaxial
cable to connect the outdoor antenna.
Outdoor Antenna Connection:
Use 75Ω coaxial cable plug or 300-75Ω impedance converter to plug in
antenna input terminal on the rear of the cabinet.
GLCD2206HDV
,
,
22 Widescreen
L
CD TV Wit DVD Player
12V 5A Adaptor
nly th adaptortyp
h
DC
Use
the
o
e
e
N
U60-2120500-I1
th un
O
r
a
dapto may amag
r
d
e
e
i
t
N14119
G
G
rund
rundi
i
g
g
W
Wa
a
rrant
rrant
y
y:
:
1
0
8
80
0
0
0
5
4
0
50
9
3
2
9
59
4
A
Ne
us
w
t
Ze
ra
l
a
ia
l
MADE IN PRC
a
nd
C
L
AS
S
1
L
AS
E
R
PR
S
O
D
U
C
T
L
S
L
L
I
T
K
L
A
L
2
008/
0
3
UHF antenna
VHF antenna
75ΩCo-axis cable
Input terminal of
antenna
Mixer
Co-axis antenna
plug
Antenna in jack
75ΩCo-axis cable
- 12 -
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Connect the audio sources (Including DVD, VCDR, etc.) to the proper
AUDIO input jacks ‘L’ and ‘R’.
3. Connect the video source to the VIDEO input jack by RCA cable.
4. Connect the video source to the S-VIDEO input jack of the TV by the
S-video cable
5. Insert the AC power to the DC adaptor, then connect 12V input jack from
the monitor to its DC output jack.
6. When using the LCD as a computer screen, connect the PC from the VGA
jack of the monitor by the relevant cable.
IV. TV/Monitor Screen Operation
(1) Basic operation
1. Press the STANDBY button on the unit or from the remote control to
switch on the power. The power indicator will light up in blue colour.
Press the STANDBY button again to switch off the power, and the
indicator will change to red.
2. Press the VOL - or VOL + button to adjust the volume level. Press the
VOL - button repeatedly to decrease the volume; press the VOL + button
repeatedly to increase the volume from 0 to 100.
(2) Changing Channels
1. Press the SOURCE button on the remote control to select the TV or DTV
input mode. If you are using the receiver for the first time, an Installation
Guide menu will be displayed to guide you through the channel scan,
Use the remote control to finish channel scan (you can also refer to
Chapter V in this manual for the channel scan operation).
- 13 -
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Channel ‘1’ will appear on the left top corner of the screen after the
channel scanning is finished. Press the CH- or CH+ button to select the
previous or next channels or press the 0-9 buttons to enter a channel
number directly.
3. Press the
button on the remote control to switch between the
present channel to the last channel was viewed.
4. Press the P.MODE button repeatedly to cycle through the available video
picture modes from the below different types
Standard
Dynamic
User
Mild
5. Press the S.MODE button repeatedly to cycle through the available
sound modes from the below different types
User
Sports
Movies
Music
STANDARD
6. Press the MUTE button to cut off the sound output, press this button
again to resume sound output.
7. Press the DISPLAY button to display the preset channel information.
(3) View different input signal sources
Press the SOURCE button then press the ▲or ▼ button to select the
available input sources as follow:
DTV
TV
YPbPr
DVD
AV
HDMI
VGA
S-VIDEO
- 14 -
Download from Www.Somanuals.com. All Manuals Search And Download.
(4) View the TELETEXT program
1. Press the SOURCE button to select the DTV mode. Then press the CH-
or CH+ button on the remote control to select a DTV channel in order to
pick up the TELETEXT signal, if broadcast.
2. Press the TEXT button to enter TELETEXT mode, press the TEXT
button again to exit.
3. Press the CH- or CH+ button to select the previous page or press the 0-9
numeric buttons for the next page.
Note: The first number should not be ‘0’ or ‘9’.
4. Refer to the chapter of ‘Remote Control ’ to understand other functions of
the TELETEXT buttons.
V. TV Channel Menu and Adjustment
- Press SOURCE button to select DTV or TV input.
- Press LCD MENU button and the CHANNEL menu will appear.
- Press ▲▼ to select the items: Auto Tuning, DTV Manual Tuning, ATV
Manual Tuning, press ENTER button to confirm.
- Press the MENU button to return to previous menu.
- Press the EXIT button to exit the menu.
- 15 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Auto tuning
DTV Manual tuning
- Press ◄► to select the channel, then press ENTER to start scan.
ATV manual tuning
- Press the ▲or▼ button to select the items, and press the ►or◄ button to
adjust. See details in the following sub-options.
- 16 -
Download from Www.Somanuals.com. All Manuals Search And Download.
- Press the ENTER button to confirm and press the LCD MENU button to
return to previous menu or press the EXIT button to exit.
Storage To
- Press the ►or ◄ button to select the channel number you want to save to.
System
- Press the ► or ◄ button to select the TV sound system.
Current CH
- Press the ► or ◄ button to select the current channel.
Search
- Press the ► or ◄ button to search backward/forward,
- press the LCD MENU or EXIT to stop the program searching.
Fine-Tune
- Press the ► or ◄ button to fine tuning when the signal level of the current
channel is weak.
Skip
- Press the ► or ◄ button to turn on/off the switch of skip. When it’s set to
ON, the current channel will be skipped when you switch channels by
pressing the CH+ or CH- buttons.
PICTURE menu
- Press the LCD MENU button to display the OSD menu，then press the ◄ or
► button to select PICTURE menu.
- Press the ▲ or ▼ button to select the items in PICTURE menu, press the ►
button to enter the sub-menu, press the LCD MENU button to return to the
previous menu or press the EXIT button to exit.
- 17 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture Mode
Press the ◄ or ► button to select picture modes.
Contrast
Press the ◄ or ► button to adjust the contrast.
Brightness
Press the ◄ or ► button to adjust the brightness.
Colour
Press the ◄ or ► button to adjust the colour.
Sharpness
Press the ◄ or ► button to adjust the sharpness.
Tint
Press the ◄ or ► button to adjust the sharpness, this option only works in
VGA mode and VGA input connected.
Colour Temperature
Press the ◄ or► button to select colour temperature: Cool, User, Warm,
Medium.
Aspect Ratio
Press the ◄ or ► button to select Aspect Ratio: Zoom1, Zoom2, Auto, 4:3,
16:9.
Noise Reduction
Press the ◄ or ► button to turn the Noise Reduction function on or off.
SOUND menu
- 18 -
Download from Www.Somanuals.com. All Manuals Search And Download.
- Press the LCD MENU button to display the OSD menu，then press the ◄ or
► button to select SOUND menu.
- Press the ▲ or ▼ button to select the items in SOUND menu, press the ◄
or ► button to enter the sub-menu, press the LCD MENU button to return to
the previous menu or press the EXIT button to exit.
Sound Mode
Press the ◄ or ► to select sound mode: User, Standard, Music, Movie,
Sports.
Treble
Press the ◄ or ► button to adjust the treble.
Bass
Press the ◄ or ► button to adjust the bass.
Balance
Press the ◄ or ► button to adjust the balance of left/right output channels.
Auto Volume
Press the ◄ or ► button to select off or on, when it’s set to on, the volume
level will be reduced automatically if you set the volume too high.
Surround Sound
Press the ◄ or ► button to turn the surround sound effect on or off.
TIME menu
- Press the LCD MENU button to display the OSD menu, then press the ◄ or
► button to select TIME menu.
- Press the ▲ or ▼ button to select the items in TIME menu, press the ◄ or
- 19 -
Download from Www.Somanuals.com. All Manuals Search And Download.
► button to enter the sub-menu, press the LCD MENU button to return to
the previous menu or press the EXIT button to exit.
Clock
Press the ◄ or ► button to select hour and minute, press the ▲ or ▼ button
to set the current time.
Off time
Press the ◄ or ► button to select on, press the ► button to enter the setup
sub-menu, then to set the time you want the unit to be turned off, select the
time using the ▲,▼,◄ or ► buttons.
On time
Press the ◄ or ► button to select on, press the ► button to enter the setup
sub-menu, then to set the time you want the unit to be turned on, select the
time using the ▲,▼,◄ or ► buttons.
Sleep timer
Press the ◄ or ► button to set the sleep time: 240min, 180min, 120min,
90min, 60min, 30min, 20min, 10min.
Auto sleep
Press the ◄ or ► button to select on or off. When it’s set to on, the unit will
turn to standby mode automatically if there is no signal input for a period of
about 5 minutes.
Time Zone
Press the ◄ or ► button to set the time zone.
DEFAULT menu
- 20 -
Download from Www.Somanuals.com. All Manuals Search And Download.
- Press the LCD MENU button to display the OSD menu，then press the ◄ or
► button to select DEFAULT menu.
- Press the ▲ or ▼ button to select the items in DEFAULT menu, press the
◄ or ► button to enter the sub-menu, press the LCD MENU button to
return to the previous menu or press the EXIT button to exit.
Language
Press the ◄ or ► button to select the OSD language, the default language
is English.
Audio Language
Press the ◄ or ► button to select the Audio language, the default language
is English.
Subtitle Language
Press the ◄ or ► button to select the Subtitle language, the default
language is English.
Hearing impaired
Press the ◄ or ► button to turn this function on or off.
Country
To show the country you have set when you started auto scan.
Restore Factory Default
Press the ► button to restore, this operation will reset the unit to factory
default and all settings and stored channels will be cleared.
LOCK menu
- 21 -
Download from Www.Somanuals.com. All Manuals Search And Download.
- Press the LCD MENU button to display the OSD menu，then press the ◄ or
► button to select LOCK menu.
- Press the ▼button and enter password, the default password is “0000”.
- Press the ▲ or ▼ button to select the items in LOCK menu, press the ◄ or
► button to enter the sub-menu, press the LCD MENU button to return to
the previous menu or press the EXIT button to exit.
Lock system
Press the ◄ or ► button to turn off or on.
Set Password
Press the ENTER or ► button and enter the new password.
Lock Program
Press the ENTER or ► button to enter the program list. Press the ▲ or ▼
button to select the channel you want to lock then press the green button to
lock, the lock icon will appear behind the locked channel, to un-lock the
channel, select the locked channel and press the green button again, the lock
icon will disappear.
Parental Guidance
Press the ◄ or ► button to set program rating to block some of programs.
EPG menu
The EPG (Electronic Programme Guide) menu is used to look at what is
being broadcast on a DTV or Radio channel at a later point in time.
Press the EPG button to access the EPG menu, the detailed programme
information of the channel currently being viewed will be displayed.
- 22 -
Download from Www.Somanuals.com. All Manuals Search And Download.
To see what is going to be broadcast after the current programme, press the
► button to change the time and press the◄ button to move the time back.
To view a different channel, press the ▲ or ▼ button. To book a wanted
programme for later watching, press the blue button to enter setting menu.
Press the green button to enter the schedule list.
To exit the EPG menu and watch the selected channel, press the EPG
or EXIT button.
VI. DVD PLAYER OPERATION
a. Basic operation
1. Press the SOURCE button on the remote control to select the DVD
function mode. Insert a disc into the slot of the DVD player and it will start
to read the disc automatically.
2. Press the
eject.
button on the remote control, the disc will automatically
Note: Insert the disc with reflective data side facing to the front of
the TV. Some slight picture and sound noise are produced when the
disc is loading, unloading and during playback. This is normal and
can be ignored.
HOW TO SELECT THE TRACK
If you want to play the second track or chapter, press the number button “2”
directly. Then press the ENTER button to play.
HOW TO PAUSE PLAYBACK (STILL PLAYBACK)
Press the PLAY/PAUSE button once during playback.
Press the PLAY/PAUSE button again to resume normal playback.
HOW TO REMOVE THE DISC
Press the
button on the remote control.
Wait until the disc is completely ejected before removing.
HOW TO STOP PLAYBACK
- 23 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Press the STOP button once, the DVD video player will stop. Then press the
PLAY button to resume playback of the disc from the same point. Press the
STOP button twice, and disc will stop completely. Press the PLAY button to
start the DVD playback from the first track.
FAST FORWARD/ BACKWARD
Press the ꢀ or ꢁ buttons to toggle between different playback speeds in
sequence at x2, x4, x8 or x20. Press the
normal speed.
button to return playing at
Note: The sound is not available while playing in this mode.
SKIP TO NEXT/ PREVIOUS TRACK
Press the ꢂ or ꢃ buttons to select the next track or previous track.
b. Slow Play
Press the SLOW/STEP (>I) button when playing, the disc will play at 1/2,
1/3,1/4, 1/5,1/6, 1/7 of the normal speed. Press the
playing at normal speed.
button to return
Note: The sound is not available while playing in this mode.
c. Zoom Picture
This DVD video player allows you to zoom in/out of a picture as well as shift
the zoom point. Press the ZOOM button during normal play or when in slow
motion. The DVD player magnifies the center of the picture at 2x, 3x, 4x, 1/2,
1/3, 1/4 of the normal picture.
d. Repeat Play
You can use the REPEAT button to repeat the play of various sections of your
DVD.
Press the REPEAT button once to repeat playing the present chapter.
Press the REPEAT button again to repeat playing the present title.
Press the REPEAT button third time to repeat playing the whole disc.
Press the REPEAT button for the fourth time to cancel repeat play and return
to normal play.
- 24 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Note: For different discs, the REPEAT button may have a different
function.
REPEAT A to B SPECIFIC SECTION
You can repeat a specific section by the A-B button on the remote control.
Firstly press the A-B button at the beginning of the section you want, then
press it again at the end of the section. The unit will now repeat playing from
A to B. If you want to cancel the repeat section, please press the A-B button
once again.
Note: Some discs will not respond to the A-B repeat function.
e. Mute
Press the MUTE button on the remote control to suppress the sound output
while a disc is playing. Press the same button again to resume playing with
sound.
f. Menu playback
Press the D.MENU button to display disc menu or return to the root menu
when playing the DVD discs.
Note:
For different DVD discs, the D.MENU button may have different menu display
information.
g. Title playback
Press the TITLE button when playing the DVD discs, there will be an
indication “ TITLE “ on the screen.
Press the ▲,▼,◄ or ► buttons to select your favourite title and press the
ENTER button to play from the first chapter of selected title.
h. Display
During playback, press the D.DISP button on the remote control to show the
current information available. The following information will appear - Title
Elapsed; Title Remain; Ch. Elapsed; Ch. Remain; Display Off and so on.
Note: For different discs, D.DISP button may have a different function.
- 25 -
Download from Www.Somanuals.com. All Manuals Search And Download.
i. Playing in a Favourite Order
Combine your favourite titles, chapters or tracks and play them in your
favourite order.
HOW TO SET TITLES, CHAPTERS, OR TRACKS IN A FAVOURITE
ORDER
The program playback function will automatically playback titles, chapters or
tracks in the order preprogrammed.
1. Insert a disc, press the PROG button, the menu will appear on the
screen, as following:
PROG
T
C
T
C
T
C
T
C
1
2
3
4
_ _: _ _
_ _: _ _
_ _: _ _
_ _: _ _
5
6
7
8
_ _: _ _
_ _: _ _
_ _: _ _
_ _: _ _:
9
_ _: _ _:
13 _ _: _ _
14 _ _: _ _:
15 _ _: _ _
16 _ _: _ _
10 _ _: _ _
11 _ _: _ _:
12 _ _: _ _
CLAER
PLAY
2. Input the numbers to select the title and chapter (track) you want, then
press the ▲,▼,◄ or ► buttons to move the cursor to input the next one.
3. Press the ▲,▼,◄ or ► buttons to select and highlight the word PLAY,
then, then press the ENTER button. The DVD video player starts
memory playback.
Notes:
z
When the DVD video player is switched off, or if the discs are
removed, the program item will be removed.
z
z
For different discs, PROG button may have a different function.
If you press the STOP button once the DVD video player will stop.
At this point, press the ENTER button to re-start the disc from
the same point.
z
If you press the STOP button twice the program playing will be
cancelled.
- 26 -
Download from Www.Somanuals.com. All Manuals Search And Download.
j. Selecting the Camera Angles Setting
This DVD video player allows you to select from several different angles.
Press the ANGLE button while playing back a scene recorded with multiple
angles. You may only press the ANGLE button when the angle icon appears
on the DVD display. Each time you press the ANGLE button, the angle will
change.
Notes:
z
z
The angle function will not work on DVD video discs that do not
contain recorded multiple angles.
During still playback, you are able to change the camera angle.
However, when you resume to normal playback, the camera
angle changes to the new settings.
z
The angle icon indicator will illuminate while playing back a title
that contains at least one scene recorded with multiple angles.
k. Selecting Subtitles
This DVD video player allows you to display subtitles which are included on
the disc.
By Pressing the SUBTITLE button during playback, you have the option to
select a preferred subtitle from those included on the DVD video disc. To turn
off the subtitle function, press the SUBTITLE button during playback until the
subtitles disappears.
Notes:
z
z
With some DVD discs, you may not be able to turn off the subtitles
and they will appear on screen automatically.
As you press the SUBTITLE button, the subtitles may not appear
immediately during some screens.
l. Selecting languages
This DVD video player allows you to select a preferred languages which are
included on the Multi-languages DVD discs.
By Pressing the LANG button once during playback to display current
language, press the LANG button again to toggle between different language
mode in sequence.
- 27 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Note: For MP3/CD discs playback, press the LANG button to switch
between different audio channels in sequence.
m. MP3/JPEG playback
1. In DVD mode, Insert a MP3 or JPEG CD into the disc slot, the DVD video
player will initialize the disc and the directory (folder) will be shown on
screen. The first MP3 or JPEG file will be played automatically.
2. Press the ▲,▼,◄ or ►buttons to select the folders, MP3/JPEG files or
modes and press the ENTER button on the remote control to enter the
folder or start playback.
3. When playing MP3 files, press the ꢂ or ꢃ buttons during playback to
skip the tracks.
Notes:
z
z
z
When playing MP3 Files, there is no picture display ,only there is
audio output.
When viewing the JPEG pictures, you could press the▲,▼,◄ or ►
buttons to flip or rotate the picture.
When viewing the JPEG pictures, you could press D.MENU button
to enter into preview mode to display 12 pictures. Press ꢂ or ꢃ
button to select next or last page or press the numeric buttons to
view the corresponding pictures.
- 28 -
Download from Www.Somanuals.com. All Manuals Search And Download.
n. INTRO playback
Press the INTRO button to play the first 10 seconds of each track when
playing CD discs .
o. Customizing the Function Settings
This DVD video player allows you to customise the performance to your
personal preference.
DISPLAYING THE SETUP MENU SCREEN:
The DVD SETUP MENU screen asks you to select a setting category from
SYSTEM SETUP, LANGUAGE SETUP, AUDIO SETUP and DIGITAL
SETUP. The selected category will provide you with the setting details on the
TV screen. Please look at the following for more details.
Press the DVD SETUP button to enter the SETUP MENU. Press the ▲,▼,◄
or ► buttons to select and highlight the category. Then press the ENTER
button to confirm. Press the DVD SETUP button again to return to the root
menu or to exit the setting menu.
Note: Functions and menu may change without notice.
1. System Setup
TV SYSTEM
This menu enables you to set
the picture format for your
TV/DVD between NTSC/ PAL/
AUTO according to your
request and local TV system.
- 29 -
Download from Www.Somanuals.com. All Manuals Search And Download.
TV TYPE
This menu enables you to select
one of the three aspect ratios:
4:3 PS / 4:3LB / 16:9
z
4:3PS(Normal)
Normal Pan and Scan is used for most
normal television broadcasts. It has an
aspect ratio of 4:3. Choose this setting
when viewing the movies, the picture will
fill the screen but left and right edges of
the picture may be cut off from the screen.
z
4:3LB(Normal)
Choose this setting will allow you to to
view the movies in its original aspect ratio.
the entire frame of the movie will be
displayed on screen but will occupy a
smaller portion of the screen.
z
16:9 (Wide)
Choose this setting if you have a
widescreen television, this setting will
allow the original aspect ratio to be
displayed.
Note:
z
z
Playback screen size may be varied according to the disc contents.
For discs with 4:3 contents, using any mode would only display 4:3
screen
z
Screen ratio selection should be according to the connected TV or
display aspect ratio.
- 30 -
Download from Www.Somanuals.com. All Manuals Search And Download.
PASSWORD
This is used to lock and unlock the
RATING setting. The default
setting is locked. Enter the default
password”0000” by numeric
buttons, then press ENTER button
to unlock. To change the password
just input 4 digits you want in
unlock mode.
RATING
You could set the rating options
according to your preference. The
rating restriction divided in eight
different category from KID SAFE
to ADULT. The default setting is
ADULT.
Note: please refer to PASSWORD to lock/unlock the rating setting.
DEFAULT SETTING
Press the ENTER button to
restore factory default.
Note: The password and Rating setting can not be restored.
- 31 -
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Language Setup
Press the▲,▼,◄ or ► buttons to
select the LANGUAGE setup icon,
press ENTER button to confirm.
You could choose the available
languages as displayed on the
screen menu.
Note: Audio languages, Subtitle languages and Menu languages are
DVD discs specified.
3. Audio Setup
AIDIO OUTPUT
Press the▲,▼,◄ or ► buttons to
select the AUDIO OUT setup icon,
press ENTER button to confirm.
SPDIF/OFF: No output is sent to
the coaxial output.
Use this option if
you have not
connected the
coaxial output to any decoder or amplifier.
SPDIF/RAW: When selected, the raw audio contained on the disc is passed
directly to the Coaxial output. Use this setting when connecting
the coaxial output to a multi-channel decoder/ amplifier.
SPDIF/PCM: When selected, the audio contained on the disc is passed
directly to the Coaxial output in PCM format. This format ensures a very high
quality but it does not support the surround sound effect. Use this setting
when connecting the coaxial output to a receiver-amplifier not capable of
decoding multi-channel audio.
- 32 -
Download from Www.Somanuals.com. All Manuals Search And Download.
TONE
Press the▲,▼,◄ or ► buttons to
adjust the Tone setting.
4. Digital Setup
DYNAMIC RANGE
Press the▲,▼,◄ or ► buttons to
adjust the compression ratio for
different audio effect, When
selected FULL, the peak signal
value is smallest; When selected
OFF, the peak signal value is
biggest.
DUAL MONO
Press the▲,▼,◄ or ► buttons to
select 4 different audio output
modes: STEREO / MONO L /
MONO R / MIX MONO.
- 33 -
Download from Www.Somanuals.com. All Manuals Search And Download.
VII. Other Operation
Earphone operation
This unit possesses an earphone jack. Connect your earphones to the socket
and adjust the volume. Once plugged in, the speaker output will be cut off
automatically.
PC audio in operation
This unit has a PC audio input jack. Connect the unit to your PC with the
correct audio cable (not included). Ensure the unit is in PC mode and adjust
the volume.
- 34 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Trouble Shooting
Should the unit not function, please check the following table to find out the
possible problem. If you still can not solve the problem, please contact the
Grundig Warranty line.
a. DVD player
SYMPTOM
CAUSE
Wrong connection or loose
connection;
POSSIBLE CURE
Check and correct all
connections;
No sound
System mute.
Cancel mute.
Disc playing
abnormally
Disc dirty or scratched
Clean or change the disc.
Turn the disc the correct
side up.
Disc not playing Disc placed upside down
Obstacles between remote
Clear away obstacles;
Change battery;
Operate at a closer
distance.
control and the sensor on the
Remote control
unit;
not working
Battery has no power;
Too far from the TV.
External interference with the
Does not work
CPU.
Pull out the plug and insert
again.
- 35 -
Download from Www.Somanuals.com. All Manuals Search And Download.
b. TV/Monitor
Symptom
Remedy
1. Check whether the power plug is connected to the power
supply.
No power
2. Pull out the plug and wait for 60 seconds, and then insert
the power plug again and switch on the TV/monitor.
1. Check whether the antenna is connected properly.
2. Change to another channel.
No picture
3. Change the length and the contrast setting.
4. Make sure that the AV picture input cable is connected
properly.
1. Increase the volume.
2. Check whether the TV is in MUTE mode.
3. Make sure that the sound system setting is correct.
4. Ensure the AV audio signal input cable is connected
properly.
No sound
1. Ensure that the equipment is connected properly.
2. Ensure that the AV video signal input is connected
properly.
Color distortion
Picture/sound
1. Check whether the equipment is connected properly.
2. Adjust the antenna if use an outdoor antenna.
1. Make sure that the batteries are installed with correct
polarities.
have interference
Remote control is 2. Clean the remote sensor.
not functioning 3. Ensure that there is no foreign object between the
remote control and the sensor.
4. Operate the remote control at a distance no more than
6 metres from the remote sensor
Screen
glittering Reset the computer and enter into the safety mode, then
under PC mode
select the appropriate screen type by consulting the
operation manual.
Screen traversed
under PC mode
The phase is not appropriate. Enter into the PC setting and
change to correct level.
- 36 -
Download from Www.Somanuals.com. All Manuals Search And Download.
VIII. Notes
(1) Please read these operating instructions carefully before you
operate this unit.
(2) When you want to cut off the electricity supply to the unit, please
press the STANDBY button on the unit, then take out the plug from
the wall outlet.
(3) Don’t press any buttons if you are not using the unit. Set the
STANDBY button to “OFF”, and take out the batteries from the
remote control if the unit is not being used for a long period of time.
(4) Be cautious of the safe mark.
(5) Repairs are to be referred to qualified service personnel. DO NOT
attempt to take apart by yourself.
(6) Due to a sudden change in temperature or humidity, or when warm
air comes into contact with any cold parts in the unit, condensation
may form. When condensation forms inside, the unit may not
function well. Once condensation disappears, the unit will return to
normal functions. Placing the unit in a warm room will help to dry up
condensation. This should take 1 to 2 hours, depending on
environmental conditions. As condensation may also appear on the
disc, it should be wiped from the center towards the outer side
using a dry cloth.
(7) It is dangerous to use warped or broken discs since lasers rotate at
high speed. Never use discs repaired with plastic tape or glue, as it
will lead to damage. After playing, if you hear a strange noise or the
unit flatters, e.g. the disc does not turn smoothly, please stop
playing immediately.
(8) Please remove the disc after use and put into a case, store them in
a vertical position. Tilting or piling may lead to warping.
Please keep the discs away from direct sunlight, high temperature
and humidity.
Do not stick labels onto discs.
Do not scratch the surface of discs.
- 37 -
Download from Www.Somanuals.com. All Manuals Search And Download.
IX. Maintenance
1). Cleaning the cabinet
Use a soft cloth slightly moist with a mild detergent solution. Do not
use a solution containing alcohol, spirits, ammonia or abrasives.
2). Cleaning discs
When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc
from the centre outwards.
Do not use solvents such as benzine, thinners, commercially available
cleaners or antistatic spray intended for analogue records.
WARNING:
To prevent fire or shock hazard, do not expose this unit to rain or moisture.
Do not remove cover, no user serviceable parts inside, refer servicing to
qualified service personnel.
- 38 -
Download from Www.Somanuals.com. All Manuals Search And Download.
X. Specifications
Model No.
Screen size
Screen format
Resolution
GLCD2206HDV/GLCD2206HDVW
22 inch
16:9
1680*1050
1000:1
Contrast
LCD
Brightness
300 cd/m²
Display colours 16.7M
View angle
170° (horizontal) / 160° (vertical)
5 ms
Response time
TV system
DTV: DVB-T
ATV: PAL I/BG/L/DK
Audio: MPEG2 Audio Layer I&II
Video: MPEG2 Transport MP@HL
Demodulator : COFDM
OFDM Mod.: 2K, 8K FFT, SFN and MFN
Packed Carries: 2K/8K
DTV decode
TV
DTV de-mod.
Tuner
Guard Interval: 1/4, 1/8, 1/16, 1/32
Integrated and frequency synthesis
DVD
Compatible with CD/MP3/WMA/JPEG/VCD/DVD formats
Coaxial
Video
X 1
X 1 ( CVBS)
S-Video
VGA
X 1
Terminals
X 1
HDMI
X 1
Audio L/R
YPbPr
X 1
X 1
Audio output
Gross weight
Power supply
2 X 3W (rms)
9.5 Kgs
DC 12V 5A, AC110~240V, 50Hz/60Hz
Max 60W
Power Consumption
* Design and specifications are subject to change without prior notice.
- 39 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Model No.
GLCD1906HDV/GLCD1906HDVW
Screen size
Screen format
Resolution
Contrast
19 inch
16:9
1440*900
700:1
LCD
Brightness
300 cd/m²
Display colours 16.7M
View angle
160° (horizontal) / 160° (vertical)
Response time
TV system
8 ms
Digital: DVB-T/ Analog: PAL I/BG/L/DK
Audio: MPEG2 Audio Layer I&II
Video: MPEG2 Transport MP@HL
Demodulator : COFDM
DTV decode
TV
OFDM Mod.: 2K, 8K FFT, SFN and MFN
Packed Carries: 2K/8K
DTV de-mod.
Tuner
Guard Interval: 1/4, 1/8, 1/16, 1/32
Integrated and frequency synthesis
DVD
Compatible with CD/MP3/WMA/JPEG/VCD/DVD formats
Coaxial
Video
X 1
X 1 ( CVBS)
S-Video
VGA
X 1
Terminals
X 1
HDMI
X 1
Audio L/R
YPbPr
X 1
X 1
Audio output
Gross weight
Power supply
2 X 3W (rms)
8.5 Kgs
DC 12V 5A, AC110~240V, 50Hz/60Hz
Max 60W
Power Consumption
* Design and specifications are subject to change without prior notice.
- 40 -
Download from Www.Somanuals.com. All Manuals Search And Download.
XI. Display modes
Resolution
720x400
Horizontal Freq. (KHz)
Vertical Freq. (Hz)
31.5
31.5
70
70
640x400
640x480(VGA)
640x480(VGA)
640x480(VGA)
800x600(SVGA)
800x600(SVGA)
800x600(SVGA)
1024x768(XGA)
1024x768(XGA)
1024x768(XGA)
1280x1024(SXGA)
31.5
37.9
37.5
37.9
47.2
46.9
48.4
56.5
60.0
63.5
60
72
75
60
72
75
60
70
75
60
1280x1024(SXGA)
80.0
75
1. Modes, which are not listed in the above table, may not be supported. For
an optimal picture it is recommended to choose a mode listed in the table.
2. You have 13 available modes compatible with windows.
3. It can happen that the image is disrupted. This can occur as result of a
signal from the VGA card, which does not correspond with the usual
standard. This is not, however, an error. You can improve this situation by
altering any automatic setting or by manually changing the phase setting
and the pixel frequency menu.
4. If you switch off the TV/monitor, interference lines can occur on your screen.
But it’s not a problem, no need to concern about it.
5. To extend the service life of the product, we recommend that you use your
computer’s power management function.
Note: Design and specifications are subject to change without notice.
- 41 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Warranty
Please keep your receipt as proof of purchase. This product is warranted for
any defect in materials or workmanship for three years after the original date
of purchase. This product is for normal domestic and office use only. This
warranty does not cover damage from misuse or neglect , accidental damage,
vermin infestation, excessive voltages such us lightning or power surges or
any alternation that affects the performance or reliability of the product.
In the unlikely event that your product fails to work normally, please contact
Grundig Warranty on 1800 509 394 (Australia) or 0800 450 259 (New
Zealand) and have your receipt of purchase on hand.
This guarantee is subject to the following provisions:
● It is only valid within boundaries of the country of purchase;
● The product must be correctly assembled and operated in accordance with
the instructions contained in the manual;
● This product must be used solely for domestic purposes;
● The guarantee does not cover accidental damage;
● The guarantee will be rendered invalid if the product is resold or has been
damaged by inexpert repair;
● The manufacturer disclaims any liability for incidental or consequential
damaged.
This guarantee is in addition to, and does not diminish, your statutory
or legal rights.
PO BOX 6287
Silverwater NSW 1811
Grundig Warranty: 1800 509 394 Australia
Grundig Warranty: 0800 450 259 New Zealand
- 42 -
Download from Www.Somanuals.com. All Manuals Search And Download.
PO BOX 6287
Silverwater NSW 1811
Ver. 2 28-MAY-2008
- 43 -
Download from Www.Somanuals.com. All Manuals Search And Download.
|