Quick Start Guide
GUVCD2800 Integrated Digital TV
Install remote
control batteries
Connect the aerial lead.
Press any of the
numeric buttons,
P+ or P- to switch
the TV on.
Plug in to the
mains supply
and switch on
the mains
socket.
Press the Power On/
Off button on the
front of the TV.
Power On/Off
The message below will be displayed.
Press SELECT to start the search
for digital TV channels
Once the search for digital
TV channels is complete the
message below will be
To switch between
analogue and digital
TV channels press
the TV/DTV button.
The search progression will be
displayed as shown below.
displayed. Press SELECT.
The search progression will be
displayed as shown below.
Once the search is complete the
PROGRAM list will be briefly
displayed and the TV will tune to the
first channel found.
When the warning message
Refer to the manual
for detailed operating
information.
is displayed press T
to highlight CONTINUE
and press SELECT.
Helpline: 0870 920 1101
Download from Www.Somanuals.com. All Manuals Search And Download.
|