Grizzly Trimmer G8120 User Manual

MODEL G8120  
STRAIGHT HANDLE  
METAL SHEAR  
INSTRUCTION SHEET  
EYE/EAR INJURY HAZARD!  
Wear safety glasses and  
hearing protection during  
use of this tool!  
INJURY HAZARD!  
Always disconnect tool from  
air to prevent unexpected  
operation during service!  
DO NOT EXCEED 120 PSI!  
Personal injury could  
occur.  
Figure 1. Model G8120.  
CUT HAZARD!  
Keep hands and fingers  
away from scissor action  
of blades. Serious cuts will  
occur!  
Maintenance  
Metal shear MUST have 3-4 drops of oil directly  
dropped into the air fitting before each use as  
shown in Figure 2.  
Introduction  
This straight handle metal shear is highly maneu-  
verable for working into tight spots. It cuts sheet  
3
steel up to 64" thick and sheet aluminum up to  
7
116" thick. Width of cut is 32". The no-load speed  
is 2500 strokes per minute and average air con-  
sumption is 6 CFM.  
Inventory  
A. Metal Shear................................................ 1  
B. Hex Wrench 4mm ...................................... 1  
Figure 2. Lubricating directly into air fitting.  
If blade sharpening is ever needed, remove the  
three lock screws (#23) with the 4mm hex wrench  
to remove the blades & spacers (#24–27). Take  
the blades to a qualified sharpening and grinding  
service, then reinstall.  
Operation  
1
Install a 4" NPT quick connect air fitting into the  
end of the metal shear. Lubricate before use with  
pneumatic tool oil, then connect metal shear to  
your regulated air source. Pull the handle lever to  
operate.  
If you need help with your new pneumatic tool,  
call our Tech Support at: (570) 546-9663.  
COPYRIGHT © SEPTEMBER, 2006 BY GRIZZLY INDUSTRIAL, INC.  
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE  
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.  
#PC8557 PRINTED IN TAIWAN  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Graco Air Conditioner 24R200 User Manual
Harbor Freight Tools Battery Charger 68750 User Manual
Harbor Freight Tools Impact Driver 92622 User Manual
Harbor Freight Tools Power Hammer 94847 User Manual
Honeywell Thermostat CM921 User Manual
Hotpoint Refrigerator RSAV21T User Manual
Hotpoint Washer BHWMD 732 User Manual
Hotpoint Washer VWSR4150D User Manual
Husqvarna Trimmer 323L User Manual
iHome MP3 Docking Station iH17 User Manual