MODEL G0472/G0473/G0476
SANDBLASTING CABINET
OWNER'S MANUAL
G0472
G0473
G0476
COPYRIGHT © OCTOBER, 2005 BY GRIZZLY INDUSTRIAL, INC. REVISED MAY 2006.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#CR7364 PRINTED IN USA
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
INTRODUCTION............................................................................................................................... 2
Foreword .................................................................................................................................... 2
Contact Info................................................................................................................................ 2
Machine Data Sheet................................................................................................................... 3
SECTION 1: SAFETY....................................................................................................................... 4
Safety Instructions for Machinery............................................................................................... 4
Additional Safety Instructions for Sandblasters ......................................................................... 6
SECTION 2: SET UP........................................................................................................................ 7
Set Up Safety............................................................................................................................. 7
Items Needed for Set Up ........................................................................................................... 7
Unpacking .................................................................................................................................. 7
G0472 Assembly........................................................................................................................ 8
G0473 Assembly........................................................................................................................ 9
G0476 Assembly...................................................................................................................... 10
SECTION 3: OPERATIONS ........................................................................................................... 11
Operation Safety ...................................................................................................................... 11
Basic Operation........................................................................................................................ 11
Abrasive Options...................................................................................................................... 12
Nozzle/Jet Options................................................................................................................... 12
Notes........................................................................................................................................ 13
SECTION 4: PARTS....................................................................................................................... 14
Parts Breakdown (G0472)........................................................................................................ 14
Parts List (G0472).................................................................................................................... 15
Parts Breakdown (G0473)........................................................................................................ 16
Parts List (G0473).................................................................................................................... 17
Parts Breakdown (G0476)........................................................................................................ 18
Parts List (G0476).................................................................................................................... 19
WARRANTY AND RETURNS........................................................................................................ 20
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
Foreword
Contact Info
We are proud to offer the Model G0472/G0473/
G0476 Sandblasters. These machines are a part
of a growing Grizzly family of fine wood and met-
alworking machinery. When used according to
the guidelines set forth in this manual, you can
expect years of trouble-free, enjoyable operation
and proof of Grizzly’s commitment to customer
satisfaction.
If you have any comments regarding this manual,
please write to us at the address below:
Grizzly Industrial, Inc.
Technical Documentation Manager
P.O. Box 2069
C
/O
Bellingham, WA 98227-2069
We are pleased to provide this manual with the
Model G0472/G0473/G0476. It was written to
guide you through assembly, review safety con-
siderations, and cover general operating proce-
dures.
We stand behind our machines. If you have any
service questions or parts requests, please call or
write us at the location listed below.
Grizzly Industrial, Inc.
1203 Lycoming Mall Circle
Muncy, PA 17756
Phone: (570) 546-9663
Fax: (800) 438-5901
The specifications, drawings, and photographs
illustrated in this manual represent the Model
G0472/G0473/G0476 as supplied when the man-
ual was prepared. For your convenience, we
always keep current Grizzly manuals available on
your machine will be reflected in these manuals
as soon as they are complete.
E-Mail: [email protected]
-2-
G0472/G0473/G0476 Sandblasters
Download from Www.Somanuals.com. All Manuals Search And Download.
MACHINE DATA
Machine Data Sheet
SHEET
Customer Service #: (570) 546-9663 • To Order Call: (800) 523-4777 • Fax #: (800) 438-5901
MODEL G0472 SANDBLASTING CABINET
Design Type ...................................................................................................... Floor Model
General Specifications:
Width ........................................................................................................................36"
Height.......................................................................................................................55"
Depth.....................................................................................................................223⁄4
"
Operating Air Pressure Range .................................................................... 60-116 PSI
Recommended Air Supply............................................................................. 5-25 CFM
Net Weight..........................................................................................................120 lbs
Abrasive Capacity ...............................................................................................40 lbs.
Abrasive Type ................................................................................................. Dry Only
Lighting Type.................................................................................15 Watt Fluorescent
Load & Unload Access......................................................................................... Sides
Power Supply ..............................................................110VAC w/12VDC Transformer
MODEL G0473 SANDBLASTING CABINET
Design Type ............................................................................................... Benchtop Model
General Specifications:
Width .....................................................................................................................241⁄2
"
Height.......................................................................................................................21"
Depth.....................................................................................................................191⁄2
"
Operating Air Pressure Range .................................................................... 60-100 PSI
Recommended Air Supply............................................................................. 5-14 CFM
Net Weight............................................................................................................50 lbs
Abrasive Capacity ...............................................................................................10 lbs.
Abrasive Type ................................................................................................. Dry Only
Lighting Type.................................................................................15 Watt Fluorescent
Load & Unload Access......................................................................................... Sides
Power Supply ..............................................................110VAC w/12VDC Transformer
MODEL G0476 SANDBLASTING CABINET
Design Type ............................................................................................... Benchtop Model
General Specifications:
Width .....................................................................................................................223⁄4
"
Height.......................................................................................................................19"
Depth........................................................................................................................19"
Operating Air Pressure Range .................................................................... 60-100 PSI
Recommended Air Supply............................................................................. 5-14 CFM
Net Weight............................................................................................................50 lbs
Abrasive Capacity ...............................................................................................10 lbs.
Abrasive Type ................................................................................................. Dry Only
Lighting Type.................................................................................15 Watt Fluorescent
Load & Unload Access......................................................................................... Sides
Power Supply ..............................................................110VAC w/12VDC Transformer
Specifications, while deemed accurate, are not guaranteed.
-3-
G0472/G0473/G0476 Sandblasters
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 1: SAFETY
For Your Own Safety, Read Instruction
Manual Before Operating this Machine
The purpose of safety symbols is to attract your attention to possible hazardous conditions. This
manual uses a series of symbols and signal words which are intended to convey the level of
importance of the safety messages. The progression of symbols is described below. Remember
that safety messages by themselves do not eliminate danger and are not a substitute for proper
accident prevention measures.
Indicates an imminently hazardous situation which, if not avoided,
WILL result in death or serious injury.
Indicates a potentially hazardous situation which, if not avoided,
COULD result in death or serious injury.
Indicates a potentially hazardous situation which, if not avoided,
MAY result in minor or moderate injury. It may also be used to alert
against unsafe practices.
This symbol is used to alert the user to useful information about
proper operation of the machine.
NOTICE
Safety Instructions for Machinery
1. READ THROUGH THE ENTIRE MANUAL
BEFORE STARTING MACHINERY.
Machinery presents serious injury hazards
to untrained users.
4. ALWAYS USE HEARING PROTECTION
WHEN OPERATING MACHINERY.
Machinery noise can cause permanent
hearing damage.
5. WEAR PROPER APPAREL. DO NOT
wear loose clothing, gloves, neckties, rings,
or jewelry which may get caught in moving
parts. Wear protective hair covering to con-
tain long hair and wear non-slip footwear.
2. ALWAYS USE ANSI APPROVED
SAFETY GLASSES WHEN OPERATING
MACHINERY. Everyday eyeglasses only
have impact resistant lenses, they are
NOT safety glasses.
6. NEVER OPERATE MACHINERY WHEN
TIRED, OR UNDER THE INFLUENCE OF
DRUGS OR ALCOHOL. Be mentally alert
at all times when running machinery.
3. ALWAYS WEAR AN ANSI APPROVED
RESPIRATOR WHEN OPERATING
MACHINERY THAT PRODUCES DUST.
Wood dust is a carcinogen and can cause
cancer and severe respiratory illnesses.
-4-
G0472/G0473/G0476 Sandblasters
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Instructions for Machinery
7. ONLY ALLOW TRAINED AND PROP-
17. REMOVE ADJUSTING KEYS AND
ERLY SUPERVISED PERSONNEL TO
OPERATE MACHINERY. Make sure
operation instructions are safe and clearly
understood.
WRENCHES. Make a habit of checking for
keys and adjusting wrenches before turn-
ing machinery ON.
18. CHECK FOR DAMAGED PARTS
BEFORE USING MACHINERY. Check
for binding and alignment of parts, broken
parts, part mounting, loose bolts, and any
other conditions that may affect machine
operation. Repair or replace damaged
parts.
8. KEEP CHILDREN AND VISITORS AWAY.
Keep all children and visitors a safe dis-
tance from the work area.
9. MAKE WORKSHOP CHILD PROOF. Use
padlocks, master switches, and remove
start switch keys.
19. USE RECOMMENDED ACCESSORIES.
Refer to the instruction manual for recom-
mended accessories. The use of improper
accessories may cause risk of injury.
10. NEVER LEAVE WHEN MACHINE IS
RUNNING. Turn power OFF and allow all
moving parts to come to a complete stop
before leaving machine unattended.
20. DO NOT FORCE MACHINERY. Work at
the speed for which the machine or acces-
sory was designed.
11. DO NOT USE IN DANGEROUS
ENVIRONMENTS. DO NOT use machin-
ery in damp, wet locations, or where any
flammable or noxious fumes may exist.
21. SECURE WORKPIECE. Use clamps or
a vise to hold the workpiece when practi-
cal. A secured workpiece protects your
hands and frees both hands to operate the
machine.
12. KEEP WORK AREA CLEAN AND WELL
LIT. Clutter and dark shadows may cause
accidents.
22. DO NOT OVERREACH. Keep proper foot-
13. USE A GROUNDED EXTENSION CORD
RATEDFORTHEMACHINEAMPERAGE.
Undersized cords overheat and lose power.
Replace extension cords if they become
damaged. DO NOT use extension cords
for 220V machinery.
ing and balance at all times.
23. MANY MACHINES WILL EJECT THE
WORKPIECETOWARDTHEOPERATOR.
Know and avoid conditions that cause the
workpiece to "kickback."
14. ALWAYS DISCONNECT FROM POWER
24. ALWAYS LOCK MOBILE BASES
(IF USED) BEFORE OPERATING
MACHINERY.
SOURCE
BEFORE
SERVICING
MACHINERY. Make sure switch is in OFF
position before reconnecting.
25. BE AWARE THAT CERTAIN DUST MAY
CAUSE AN ALLERGIC REACTION in
people and animals, especially when
exposed to fine dust. Make sure you know
what type of dust you will be exposed to
and always wear an approved respirator.
15. MAINTAIN MACHINERY WITH CARE.
Keep blades sharp and clean for best and
safest performance. Follow instructions for
lubricating and changing accessories.
16. MAKE SURE GUARDS ARE IN PLACE
AND WORK CORRECTLY BEFORE
USING MACHINERY.
-5-
G0472/G0473/G0476 Sandblasters
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Safety Instructions for
Sandblasters
1. CORRECT ABRASIVES. Never use wet
abrasives in this sandblaster, it is designed
8. MAINTAINING MACHINE. Check cabinet
for any leaks, and reseal immediately.
for dry abrasives only.
9. SAFE SAND BLASTING. Do not use sys-
2. PROTECTING LUNGS. Make sure that
you always use a respirator when using or
cleaning the sandblaster.
tem over the rated PSI.
10. CORRECT LIGHTING. Do not use a light
that uses over 60 watts.
3. LEAVING THE AREA. Always disconnect
air supply when leaving the sandblaster.
11. LOADING & UNLOADING. Disconnect the
air supply before loading or unloading the
workpiece from the sandblaster cabinet.
4. PROTECTING EYES. Make sure that you
always use safety glasses when using or
cleaning the sandblaster.
12. SAFE MAINTENANCE. Disconnect air
supply and electrical before doing mainte-
nance.
5. PROTECTING ENVIRONMENT. Always
close and latch shut the sandblaster doors
when not in use.
13. SAFE SANDBLASTING. Always secure
the door(s) before beginning sandblasting
operations.
6. WORK AREA SAFETY. Clean dust collec-
tor and filters often, and repair any suction
hose leaks immediately.
7. MAINTAINING COMPONENTS. Replace
nozzles, hoses, lenses, and gloves when
they become worn.
No list of safety guidelines can be complete.
Every shop environment is different. Always
consider safety first, as it applies to your
individual working conditions. Use this and
other machinery with caution and respect.
Failure to do so could result in serious per-
sonal injury, damage to equipment, or poor
work results.
Like all machinery there is potential danger
when operating this machine. Accidents are
frequently caused by lack of familiarity or
failure to pay attention. Use this machine
with respect and caution to lessen the pos-
sibility of operator injury. If normal safety
precautions are overlooked or ignored, seri-
ous personal injury may occur.
-6-
G0472/G0473/G0476 Sandblasters
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 2: SET UP
Unpacking
Set Up Safety
The Model G0472/G0473/G0476 was carefully
packed when it left our warehouse. If you discov-
er the machine is damaged after you have signed
for delivery, please immediately call Customer
Service at (570) 546-9663 for advice.
This machine presents
serious injury hazards
to untrained users. Read
through this entire manu-
al to become familiar with
the controls and opera-
tions before starting the
machine!
Save the containers and all packing materials for
possible inspection by the carrier or its agent.
Otherwise, filing a freight claim can be difficult.
Items Needed for
Set Up
The following items are needed to complete the
set up process, but are not included with your
machine:
Description
Qty
•
•
•
•
•
•
Phillips Screwdriver #2............................... 1
Standard Screwdriver #2............................ 1
Wrench 19mm............................................ 1
Wrench 14mm............................................ 1
Wrench 10mm............................................ 1
Wrench 7mm.............................................. 1
-7-
G0472/G0473/G0476 Sandblasters
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Install the lamp and wiring with the M4-0.7 x
10 screws, washers, and nuts. Use the zip-
ties to lock the lamp to the two lamp supports
(Figure 4).
G0472 Assembly
To assemble the sandblaster:
1. Install the four legs onto the stand frame with
12 M6-1x20 screws and nuts (Figure 1).
Figure 4. Electrical installation.
5. Insert the air supply hose through the cabinet
grommet, and assemble the gun as shown
(Figure 5).
Figure 1. Stand frame.
2. Assemble the hopper assembly, the screen,
and the adhesive foam gasket in the order
shown (Figure 2).
Figure 5. Gun assembly.
Figure 2. Hopper and screen assembly.
3. Set the cabinet onto the hopper and screen
assembly, and secure it with (12) M6-1 x 40
screws and nuts (Figure 3).
Figure 3. Cabinet and frame.
-8-
G0472/G0473/G0476 Sandblasters
Download from Www.Somanuals.com. All Manuals Search And Download.
G0473 Assembly
3. Install the bulkhead fitting with gasket. Attach
the air supply hose and suction hose to the
bulkhead fittings and suction pipe with hose
clamps (Figure 3).
To assemble the sandblaster:
1. Install the filter assembly with the screws and
nuts (Figure 1).
Bulkhead
Fitting
Suction
Hose
Seal
Supply
Hose
Suction
Pipe
Washer
Figure 3. Blast gun assembly.
4. Plug in the AC/DC adapter (Figure 4).
Washer
Figure 1. Filter installation.
2. Install the gloves as shown in Figure 2.
Figure 4. Light assembly.
Figure 2. Glove installation.
-9-
G0472/G0473/G0476 Sandblasters
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Install window, hinges, lock latches, and the
knob (Figure 5).
G0476 Assembly
To assemble the sandblaster:
1. Install the two lamp holders with the two
screws (Figure 1).
Figure 5. Hinge and knob assembly.
6. Install the chain to the window and cabinet
with the screws and nuts (Figure 6).
Figure 1. Lamp holder.
2. Connect the electrical wires and install the
electrical box with the screws (Figure 2).
Chain
Figure 5. Window chain.
7. Install the bulkhead fitting with gasket. Attach
the air supply hose and suction hose to the
bulkhead fittings and suction pipe with hose
clamps (Figure 7).
Figure 2. Light assembly.
3. Install the filter assembly with the screws and
nuts (Figure 3).
Bulkhead
Fitting
Gasket
Suction
Pipe
Washer
Washer
Figure 3. Filter installation.
Figure 7. Blast gun assembly.
4. Install the gloves as shown in Figure 4.
8. Plug in the AC/DC adapter (Figure 8).
Figure 4. Glove installation.
Figure 8. Light assembly.
-10-
G0472/G0473/G0476 Sandblasters
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 3: OPERATIONS
Sandblasting presents a real hazard of silicosis and other lung contamination injuries! These
Injuries are permanent and can get worse over time. If you use sandblasting equipment without
the proper protection, your lungs and eyes may become irreversibly contaminated. DO NOT
use this sandblaster unless you know how to use it and protect yourself correctly. For types of
protective equipment and acceptable respirator types, contact your local OSHA or NIOSH office.
4. Carefully, without causing a hazardous dust
Operation Safety
cloud, pour or spade-in the abrasive into the
sandblaster. DO NOT over-fill or sandblasting
will be sluggish and very cloudy inside of the
cabinet.
NOTICE
If you have never used this type of machine
or equipment before, WE STRONGLY REC-
OMMEND that you read books, trade maga-
zines, or get formal training before begin-
ning any projects. Regardless of the con-
tent in this section, Grizzly Industrial will
not be held liable for accidents caused by
lack of training.
–For Model G0472: Use 40 lbs of abrasive.
–For Model G0473: Use 10 lbs of abrasive.
–For Model G0476: Use 10 lbs of abrasive.
5. Insert the workpiece, and close and lock the
loading door.
6. Adjust the air supply regulator to the correct
air pressure.
–For Model G0472: Use 60-116 PSI at 8-25
CFM.
–For Model G0473: Use 60-100 PSI at 5-14
Basic Operation
CFM.
The Model G0472/G0473/G0476 Sandblasters
are equipped with an industrial-duty blast gun
with ceramic tip, a siphon hose, a built-in light,
large viewing window, and sealed rubber gloves.
The hopper recycles and stores the sandblast-
ing media for reuse or easy removal. Safely
blast away paint and rust without making a mess
around your shop.
–For Model G0476: Use 60-100 PSI at 5-14
CFM.
7. Turn ON your dust collection/vacuum system
and air compresssor insert your hands in the
gloves, and begin sand blasting in a slow
circular motion.
Note: A good starting point for tip distance is
two inches away from the workpiece. Start out
with a low air pressure setting to avoid excess
peening and abrasive wear.
To use the sandblaster:
1. Wear safety glasses and respirator at all
times when running and maintaining your
sandblaster!
Note: Experiment with different pressures,
abrasives, tips and jets to gain practical
experience.
2. Plug in the AC/DC transformer and turn ON
the light.
Note: Keep the sandblasting abrasives
moisture-free, otherwise; the blast gun tip will
frequently clog.
3. Install the correct nozzle and air jet into the
gun for the abrasive type you will use.Refer to
Page 12 for options.
-11-
G0472/G0473/G0476 Sandblasters
Download from Www.Somanuals.com. All Manuals Search And Download.
Plastic Type Abrasives
Abrasive Options
Applied at low pressures of 30 to 50 PSI, plas-
tic abrasives should be harder than the coating
being removed, but softer than the workpiece to
avoid damage. Plastic abrasive is excellent for
addressing surface issues on aluminum, mag-
nesium, copper, brass, thin steel, titanium, and
composite surfaces and fiberglass.
Blasting Media from Grizzly.Com
PART #
G6535: 15 lbs. Aluminum Oxide 220 Grit.
G6536: 15 lbs. Aluminum Oxide 120 Grit.
G6537: 15 lbs. Aluminum Oxide 60 Grit.
G6538: 15 lbs. Glass Bead 50-Micron Grit.
Other Types of Abrasives Available
Ground walnut or peanut shells.
Ground corn cob.
Sodium bicarbonate.
Wheat starch.
Below is a basic introduction to some of the most
common blasting abrasives. Refer to magazines,
trade articles, professionals, and the abrasive
manufacturer for the specific surfaces that can be
addressed with a type of abrasive. All abrasives
have benefits and drawbacks like quality of sur-
face finish, abrasive life, toxicity, and what pre-
cautions you must take to prevent environmental
damage or personal injury to your respiratory
system.
Nozzle/Jet Options
Replacement Grizzly Nozzles
Steel Type Abrasives
PART #
P7145012: Nozzle Set (3⁄16",13⁄64",15⁄64",9⁄32" ID).
P7145012-1: #1 Nozzle (3⁄16" ID).
P7145012-2: #2 Nozzle (13⁄64" ID).
P7145012-3: #3 Nozzle (15⁄64" ID).
P7145012-4: #4 Nozzle (9⁄32" ID).
This aggressive abrasive creates a rough fin-
ish that accepts paint well. The abrasive is very
durable and has a long life, however; it MUST be
kept very dry to prevent rusting.
Alumina Type Abrasives
Below is the suggested air jet and nozzle combi-
nation for an approximate abrasive flow. Refer to
magazines, trade articles, professionals, and the
abrasive manufacturer for the best combination
that is required for your particular abrasive use.
This multi-purpose abrasive creates a smoother
finish than the steel abrasives, but has a shorter
life span. Less of the workpiece surface is
removed with this more forgiving abrasive.
Glass and Garnet Type Abrasives
#1
#2
#3
#4
Air Jet Orifice Diameter:
Nozzle Orifice Diameter:
Abrasive Flow @ 60 PSI:
5⁄64"
3⁄16"
Typically this abrasive works well for soft met-
als and addressing surface issues with machine
parts where tolerances cannot be affected. The
life of this abrasive is limited and not well suited
for repetitively recycling.
0.11 L/Min.
Air Jet Orifice Diameter:
Nozzle Orifice Diameter:
Abrasive Flow @ 60 PSI:
7⁄64"
13⁄64"
0.18 L/Min.
Sand Type Abrasives
1
Air Jet Orifice Diameter:
Nozzle Orifice Diameter:
Abrasive Flow @ 60 PSI:
⁄
8
"
15⁄64"
This abrasive is easy to find, and gives an aver-
age finish that is acceptable for most projects.
Sand has a good recycling life and is very eco-
nomical.
0.25 L/Min.
Air Jet Orifice Diameter:
Nozzle Orifice Diameter:
Abrasive Flow @ 60 PSI:
5⁄32"
9⁄32"
0.36 L/Min.
-12-
G0472/G0473/G0476 Sandblasters
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
-13-
G0472/G0473/G0476 Sandblasters
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 4: PARTS
Parts Breakdown (G0472)
��
��
��
��
��
��
����
��
��
��
��
��
��
��
����
��
��
��
��
��
��
��
��
��
��
��
�
��
��
��
���
�
��
���
��
�
��
����
����
�
�
����
��
�
��
��
��
��
��
�
��
��
��
�
�
�
�
-14-
G0472/G0473/G0476 Sandblasters
Download from Www.Somanuals.com. All Manuals Search And Download.
Parts List (G0472)
REF PART #
DESCRIPTION
REF PART #
DESCRIPTION
1
P0472001
P0472001-1
P0472002
P0472003
P0472004
P0472005
P0472006
P0472007
P0472008
P0472009
P0472010
P0472011
P0472012
P0472013
P0472014
P0472015
P0472015-1
P0472016
P0472017
P0472018
P0472018-1
P0472019
P0472020
P0472021
P0472021-1
P0472022
P0472023
CABINET ASSEMBLY
DOOR SEAL
24
PS22M
PHLP HD SCR M5-.8 X 25
AC/DC ADAPTER
RECEPTACLE
1-1
2
25
P0472025
P0472026
P0472027
P0472027-1
P0472028
P0472028-1
P0472028-2
P0472028-3
P0472028-4
P0472028-5
P0472028-6
P0472029
P0472029-1
P0472030
P0472031
PS62M
SCREEN FRAME
MESH SCREEN
RIGHT LEG
26
3
27
COMPLETE LIGHT ASSY.
LIGHT BULB
4
23-1
28
5
LEFT LEG
BLAST GUN
6
HOPPER
28-1
28-2
28-3
28-4
28-5
28-6
29
NOZZLE 3/16
7
SUCTION PIPE
LEFT DOOR
NOZZLE 13/64
8
NOZZLE 15/64
9
RIGHT DOOR
NOZZLE 9/32
10
11
12
13
14
15
15-1
16
17
18
18-1
19
20
21
21-1
22
23
SWITCH BOX
JET SET
HOPPER DOOR
FRAME
NOZZLE SET
VACUUM PORT
FLANGE CAP 2-1/4
LATCH
SOCKET BOX
29-1
30
HINGE
INTAKE VENT COWLING
FLANGE CAP 3-1/2
WINDOW FRAME
WINDOW PLEXIGLASS
PROTECTING FILM
PROTECTING FILM SET (4)
POWER SWITCH
ADHESIVE FOAM STRIP
GLOVE LEFT
31
DOOR HOOK
32
PHLP HD SCR M6-1 X 30
GLOVE FLANGE
SUCTION HOSE
PHLP HD SCR M4-.7 X 10
HEX NUT M4-.7
33
P0472033
P0472035
PS38M
35
66
67
PN04M
68
PN06M
HEX NUT M5-.8
69
PW01M
FLAT WASHER 8MM
PHLP HD SCR M6-1 X 25
PHLP HD SCR M6-1 X 25
HEX NUT M6-1
70
PS47M
GLOVE RIGHT
GROMMET
71
PS68M
72
PN01M
FLAT HD SCR M6-1 X 16
73
PHTEK18
TAP SCREW #10 X 5/8
-15-
G0472/G0473/G0476 Sandblasters
Download from Www.Somanuals.com. All Manuals Search And Download.
Parts Breakdown (G0473)
���
���
�����
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
�����
-16-
G0472/G0473/G0476 Sandblasters
Download from Www.Somanuals.com. All Manuals Search And Download.
Parts List (G0473)
REF PART #
DESCRIPTION
REF PART #
DESCRIPTION
101
102
104
105
108
109
115
116
117
118
119
120
121
122
123
124
125
126
127
P0473101
P0473102
PN01M
WINDOW FRAME AND SEAL
WINDOW PLEXIGLASSS
6MM FLAT WASHER
HINGE
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
152
153
155
P0473134
P0473135
P0473136
P0473137
P0473138
P0473139
PW05M
SHORT LEFT LEG
SHORT RIGHT LEG
FLAT SPACER
FLAT GASKET
BULKHEAD FITTING
HOSE NIPPLE
FLAT WASHER 4MM
HEX NUT M4-.7
PHLP HD SCR M4-.7 X 10
FOAM FILTER
P0473105
PS14M
PHLP HD SCR M6-1 X 12
HEX NUT M6-1
PN01M
P0473115
P0473116
P0473117
P0473118
P0473119
PS38M
CABINET
RIGHT DOOR
PN04M
LEFT DOOR
PS38M
HOPPER
P0473143
P0473144
P0473145
P0473146
P0473147
P0473148
P0473149
P0473150
P0473152
PHTEK18
P0473155
LAMP CLAMP
RING
PHLP HD SCR M4-.7 X 10
ZIP TIE
FILTER ELEMENT
NOZZLE SET
P0473121
P0473122
P0473123
PS38M
COMPLETE LAMP ASSEMBLY
AC/DC ADAPTER
PHLP HD SCR M4-.7 X 10
HEX NUT M4-.7
JET SET
JET SEAL SET
SCREEN
PN04M
HOSE CLAMP
PW05M
FLAT WASHER 4MM
RIGHT GLOVE
SWITCH
P0473127
TAP SCREW #10 X 5/8
LATCH
127-1 P0473127-1
LEFT GLOVE
128
129
130
131
132
133
P0473128
P0473129
P0473130
P0473131
P0473132
P0473133
HOSE CLAMP
155-1 P0473155-1
LATCH CATCH
PHLP HD SCR M4-.7 X 10
HOPPER PLUG
RECEPTACLE COVER
RECEPTACLE
PRESSURE SUPPLY HOSE
SUCTION TUBE
156
157
158
159
PS38M
P0473157
P0473158
P0473159
SUCTION HOSE
BLAST GUN
CLEAR ADHESIVE FILM SET (4)
-17-
G0472/G0473/G0476 Sandblasters
Download from Www.Somanuals.com. All Manuals Search And Download.
Parts Breakdown (G0476)
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
�����
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
-18-
G0472/G0473/G0476 Sandblasters
Download from Www.Somanuals.com. All Manuals Search And Download.
Parts List (G0476)
REF PART #
DESCRIPTION
REF PART #
DESCRIPTION
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
P0476101
P0476102
PN01M
WINDOW
127-1 P0476127-1
LEFT GLOVE
KNOB
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
157
P0476128
P0476129
P0476130
P0476131
P0476132
P0476133
P0476134
P0476135
P0476136
P0476137
P0476138
P0476139
PW05M
HOSE CLAMP
HEX NUT M6-1
PRESSURE SUPPLY HOSE
SUCTION TUBE
SUCTION HOSE
BLAST GUN
PN01M
6MM FLAT WASHER
HINGE
P0476105
PHTEK15M
P0476107
PS14M
TAP SCREW M4 X 10
CHAIN
CLEAR ADHESIVE FILM SET (4)
SHORT LEFT LEG
SHORT RIGHT LEG
FLAT SPACER
PHLP HD SCR M6-1 X 12
HEX NUT M6-1
PN01M
P0476110
PW03M
LOCK LEVER
FLAT WASHER 6MM
LOCKING HEX NUT M6-1
PHLP HD SCR M6-1 X 12
FRONT PANEL
REAR PANEL
FLAT GASKET
P0476112
PS14M
BULKHEAD FITTING
HOSE NIPPLE
P0476114
P0476115
P0476116
P0476117
P0476118
P0476119
PS38M
FLAT WASHER 4MM
HEX NUT M4-.7
PHLP HD SCR M4-.7 X 10
FOAM FILTER
PN04M
RIGHT PANEL
PS38M
LEFT PANEL
P0476143
P0476144
P0476145
P0476146
P0476147
P0476148
P0476149
P0476150
P0476151
P0476152
P0476157
HOPPER
RING
LAMP CLAMP
FILTER ELEMENT
NOZZLE SET
PHLP HD SCR M4-.7 X 10
ZIP TIE
P0476121
P0476122
P0476123
PS38M
JET SET
COMPLETE LAMP ASSEMBLY
AC/DC ADAPTER
PHLP HD SCR M4-.7 X 10
HEX NUT M4-.7
FLAT WASHER 4MM
RIGHT GLOVE
JET SEAL SET
SCREEN
HOSE CLAMPS
SWITCH HOUSING
SWITCH
PN04M
PW05M
P0476127
HOPPER PLUG
-19-
G0472/G0473/G0476 Sandblasters
Download from Www.Somanuals.com. All Manuals Search And Download.
WARRANTY AND RETURNS
Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from
the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse,
negligence, accidents, repairs or alterations or lack of maintenance. This is Grizzly’s sole written warranty
and any and all warranties that may be implied by law, including any merchantability or fitness, for any par-
ticular purpose, are hereby limited to the duration of this written warranty. We do not warrant or represent
that the merchandise complies with the provisions of any law or acts unless the manufacturer so warrants.
In no event shall Grizzly’s liability under this warranty exceed the purchase price paid for the product and
any legal actions brought against Grizzly shall be tried in the State of Washington, County of Whatcom.
We shall in no event be liable for death, injuries to persons or property or for incidental, contingent, special,
or consequential damages arising from the use of our products.
To take advantage of this warranty, contact us by mail or phone and give us all the details. We will then
issue you a “Return Number,’’ which must be clearly posted on the outside as well as the inside of the
carton. We will not accept any item back without this number. Proof of purchase must accompany the
merchandise.
The manufacturers reserve the right to change specifications at any time because they constantly strive to
achieve better quality equipment. We make every effort to ensure that our products meet high quality and
durability standards and we hope you never need to use this warranty.
Please feel free to write or call us if you have any questions about the machine or the manual.
Thank you again for your business and continued support. We hope to serve you again soon.
-20-
G0472/G0473/G0476 Sandblasters
Download from Www.Somanuals.com. All Manuals Search And Download.
WARRANTY CARD
Name_____________________________________________________________________________
Street_____________________________________________________________________________
City _______________________ State_________________________ Zip _____________________
Phone #____________________ Email ________________________ Invoice #_________________
Model # ____________________ Order #_______________________ Serial #__________________
The following information is given on a voluntary basis. It will be used for marketing purposes to help us develop
better products and services. Of course, all information is strictly confidential.
1. How did you learn about us?
____ Advertisement
____ Card Deck
____ Friend
____ Website
____ Catalog
____ Other:
2. Which of the following magazines do you subscribe to?
____ Cabinet Maker
____ Family Handyman
____ Hand Loader
____ Popular Mechanics
____ Popular Science
____ Popular Woodworking
____ Practical Homeowner
____ Precision Shooter
____ Projects in Metal
____ RC Modeler
____ Today’s Homeowner
____ Wood
____ Wooden Boat
____ Woodshop News
____ Woodsmith
____ Handy
____ Home Shop Machinist
____ Journal of Light Cont.
____ Live Steam
____ Model Airplane News
____ Modeltec
____ Woodwork
____ Woodworker West
____ Woodworker’s Journal
____ Other:
____ Rifle
____ Shop Notes
____ Old House Journal
____ Shotgun News
3. What is your annual household income?
____ $20,000-$29,000
____ $30,000-$39,000
____ $40,000-$49,000
____ $70,000+
____ $50,000-$59,000
____ $60,000-$69,000
4. What is your age group?
____ 20-29
____ 30-39
____ 60-69
____ 40-49
____ 70+
____ 50-59
5. How long have you been a woodworker/metalworker?
____ 0-2 Years ____ 2-8 Years
____ 8-20 Years
____ 6-9
____20+ Years
____10+
6. How many of your machines or tools are Grizzly?
____ 0-2 ____ 3-5
7. Do you think your machine represents a good value?
8. Would you recommend Grizzly Industrial to a friend?
_____Yes
_____Yes
_____No
_____No
9. Would you allow us to use your name as a reference for Grizzly customers in your area?
Note: We never use names more than 3 times. _____Yes _____No
10. Comments:_____________________________________________________________________
_________________________________________________________________________________
_________________________________________________________________________________
_________________________________________________________________________________
Download from Www.Somanuals.com. All Manuals Search And Download.
FOLD ALONG DOTTED LINE
Place
Stamp
Here
GRIZZLY INDUSTRIAL, INC.
P.O. BOX 2069
BELLINGHAM, WA 98227-2069
FOLD ALONG DOTTED LINE
Send a Grizzly Catalog to a friend:
Name_______________________________
Street_______________________________
City______________State______Zip______
TAPE ALONG EDGES--PLEASE DO NOT STAPLE
Download from Www.Somanuals.com. All Manuals Search And Download.
|