MODEL T10023
ACCESSORY KIT #1
FOR T10010/T10097
WET GRINDER
INSTRUCTION SHEET
Introduction
Inventory (Figure 2)
the model t10023 accessory Kit #1 for the model
t10010/t10097 Wet grinder includes fixtures for
sharpening small knives, large knives, scissors
and axes.
A. scissors sharpening Jig............................. 1
b. axe sharpening Jig.................................... 1
C. scissors Clamp .......................................... 1
D. large Knife sharpening Jig........................ 1
E. scissors sharpening Jig Knobs ................. 2
F. Knife sharpening Jig Knobs....................... 2
G. small Knife sharpening Jig........................ 1
b
a
C
d
g
e
Figure 1. t10023 accessory Kit
f
Unpacking
Figure 2. inventory.
the model t10023 accessory Kit was carefully
packed when it left our warehouse. if you discover
any parts are damaged after you have signed
for delivery, please immediately call Customer
Service at (570) 546-9663 for advice. save the
containers and all packing materials for possible
inspection by the carrier or its agent. Otherwise,
filing a freight claim can be difficult. When you
are completely satisfied with the condition of your
shipment, you should inventory the contents.
Adhere to all safety warnings outlined in
the Model T10010/T10097 Wet Grinder user
manual. If you are not familiar with the prop-
er usage of the Model T10010/T10097 Wet
Grinder, review the procedures and safety
warnings covered in that manual. Failure to
do so could result in damage to the machine
or personal injury.
Copyright © November, 2007 by grizzly iNdustrial, iNC. revised marCh, 2011 (Jb)
WARNING: NO pORTION OF THIS MANUAL MAY bE REpRODUCED IN ANY SHApE
OR FORM WITHOUT THE WRITTEN AppROvAL OF GRIzzLY INDUSTRIAL, INC.
(for models maNufaCtured siNCe 11/07) #Jb10086 priNted iN ChiNa
Download from Www.Somanuals.com. All Manuals Search And Download.
5. tighten the lock knob to clamp the knife into
the jig.
Using the Knife Sharpening Jigs
for blades shorter than 4", use the small knife
sharpening jig. for blades longer than 4", use the
large sharpening jig.
6. adjust the position of the universal support to
achieve the approximate grinding/stropping
angle.
1. uNplug the griNder from poWer!
7. adjust the position of the locking ring to fine
tune the grinding/stropping angle (Figure 8).
2. place the universal support in the horizontal
mounts on the grinder so that the grinding will
occur with the rotation direction.
Knife
3. loosen the clamping knob enough to allow
the knife to slide in and loosen the lock knob
far enough so that it does not extend through
the clamp plate (Figure 6).
lock Knob
universal support
locking ring
Figure 8. Knife sharpening.
8. tighten all knobs before reconnecting the
grinder to power to perform the operation.
Clamp plate
Clamping Knob
Tips for using the knife sharpening jigs:
Figure 6. Knob identification.
•
•
•
•
reposition the universal support for coarse
angle adjustments.
4. insert a knife into the clamp as shown in
Figure 7 and tighten the clamping knob.
reposition the lock ring on the knife sharpen-
ing jig for fine angle adjustments.
Clamping Knob
lock Knob
always grind with the direction of rotation of
the grinding/stropping wheels
always use a smooth, stroking motion with
even pressure, keeping the blade flat against
the wheel for optimal results.
•
pivot the knife sharpening jig on the universal
support as needed to follow the contour of the
knife blade.
Figure 7. Knife clamping.
-3-
t10023 Wet grinder accessory Kit #1
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Scissors Sharpening Jig
1. uNplug the griNder from poWer!
lock Knob
2. place the universal support in the vertical
mounts on the grinder, and adjust the univer-
sal support approximately 1" away from the
grinding wheel.
3. slide the scissors sharpening jig onto the
universal support, as shown in Figure 9, and
tighten the knobs.
Clamping Knob
Figure 11. scissors clamping.
6. tighten the lock knob to securely clamp the
scissors into the scissors clamp.
7. place the scissors clamp on the rails of the
sharpening jig. adjust the height of the uni-
versal support or the angle of the sharpening
jig as needed so that the clamp sits flat on
both rails as shown in Figure 12.
Rails
Beveled
Edge
Figure 9. scissors sharpening jig position.
Sharpening
Jig
4. loosen the clamping knob enough to allow
one blade of the scissor to slide in, and loos-
en the lock knob far enough so that it does
not extend through the upper portion of the
clamp (Figure 10).
Scissor
Blade
Grinding Wheel
Figure 12. scissors clamp placement.
Clamping Knob
lock Knob
8. fine tune the position of the universal jig and
the angle of the scissors jig until the beveled
edge of the blade sits flat against the grinding
wheel, as shown in Figure 12.
9. tighten all knobs and reconnect the grinder
to power before grinding.
Tips for using the scissors sharpening jig:
Clamp plate
•
always use a smooth stroking motion with
even pressure, keeping the blade flat against
the wheel for optimal results.
Figure 10. scissors clamp knobs.
5. insert one blade of the scissors into the
clamp, as shown in Figure 11, and tighten
the clamping knob.
•
do not use the stropping wheel with the uni-
versal support in the vertical mounts.
-4-
t10023 Wet grinder accessory Kit #1
Download from Www.Somanuals.com. All Manuals Search And Download.
T10023 parts breakdown and List
3
4
15
1
1
2
14
5
13
12
6
7
11
8
13
3
4
1
1
2
5
9
11
10
16
17
1
1
8
1
17
18
1
REF PART #
DESCRIPTION
REF PART #
DESCRIPTION
1
2
3
4
5
6
7
8
9
PT10023001
PT10023002
PT10023003
PT10023004
PW03M
KNURLED SCREW M6-1 x 16
STOP RING
10
11
12
13
14
15
16
17
18
PT10023010
PT10023011
PT10023012
PT10023013
PTLW13M
LARGE KNIFE SUPPORT
SCISSOR JIG RAIL
STOP RING KNOB
SCISSOR JIG HOLDER
SCISSOR JIG KNOB
HANDLE
FLAT WASHER 6MM
SMALL CLAMP PLATE
SMALL KNIFE SUPPORT
COMPRESSION SPRING
LARGE CLAMP PLATE
INT TOOTH WASHER 6MM
CAP SCREW M6-1 X 12
SCISSOR SUPPORT
PT10023006
PT10023007
PT10023008
PT10023009
PSB26M
PT10023016
PT10023017
PT10023018
SCISSOR CLAMP PLATE
AXE SHARPENING JIG
Download from Www.Somanuals.com. All Manuals Search And Download.
Buy Direct and Save with Grizzly® – Trusted, Proven and a Great Value!
~Since 1983~
Visit Our Website Today For
Current Specials!
ORDER
24 HOURS A DAY!
1-800-523-4777
Download from Www.Somanuals.com. All Manuals Search And Download.
|