Globalsat Technology Headphones BTA 830 User Manual

BTH-820, BTA-830 user manual  
page 1  
Bluetooth Stereo Headset &  
Stereo Audio Gateway  
User manual, version 1.0  
Copyright  
© 2005 GlobalSat Technology Corporation. All rights reserved  
The trademarks mentioned in this document are legally registered to their respective companies.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BTH-820, BTA-830 user manual  
page 3  
Introduction  
BTH-820 Bluetooth Stereo Headset provides you the CD quality stereo sound. If a call is coming while you are  
listening to the music, just press any button to receive the call. Meanwhile, the music will stop automatically, and  
then resume itself after you hang up the phone.  
BTA-830 Bluetooth Stereo Audio Gateway enables your audio device to have the ability of wireless Bluetooth  
transmission. It can transmit crystal clear digital sound to any compatible Bluetooth audio receiver up to 10 meters  
away. Just plug the BTA-830 into the headphone jack of your audio device (iPod, PDA, MP3 player, CD player,  
mobile phone, or PC), the audio music will be sent out from BTA-830 by the wireless Bluetooth signal. Then you  
can use a Bluetooth headset (receiver) to listen to the music.  
Features  
BTH-820  
BTA-830  
Bluetooth Stereo Headset  
Stereo Audio Gateway  
Light weight and handy design.  
Press any button to receive a call.  
Plug-and-Play  
Support standard A2DP profile for consistent  
and clear stereo sound quality.  
In the headset mode, you can adjust the volume and refuse  
to answer a call.  
Compatible with portable CD player, MP3  
player, TV, DVD player and more.  
You can answer the call while listening to the music, and the  
music will resume automatically after you hang up the phone. Divert the high quality audio from wired to  
wireless.  
Built-in Hold key and microphone.  
Outstanding performance enables you to  
enjoy the true digital sound with CD stereo  
quality.  
A2DP+AVRCP Profile  
A2DP Profile  
You can control the “play”,  
“pause”, “stop”, “next song” and  
“previous song” of the Windows  
Media Player.  
You can control the  
play/mute, volume up  
and down of BTH-820.  
Fast and simple one-button operation.  
Known Supported Device:  
Globalsat: BTA-806 / BTA-804A  
Bluetooth version 1.1 / 1.2 / 2.0 compatible.  
Operation range up to 10 meters. (Open Space)  
Stand-by time up to 100 hours  
Embedded rechargeable Li-polymer battery  
LED indicator for low power and charging.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BTH-820, BTA-830 user manual  
page 4  
Power button  
USB power connector  
Earphone jack  
Built-in Microphone  
Power button  
USB power connector  
Hold key  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BTH-820, BTA-830 user manual  
page 5  
Specification  
Model Name  
Product Description  
Color  
BTH-820  
Bluetooth Stereo Headset  
Blue / Orange  
BTA-830  
Stereo Audio Gateway  
Blue / Orange  
FCC, CE  
Certification  
FCC, CE, BQB  
Bluetooth Version  
RF Output Power  
Frequency  
Bluetooth v1.2 Specification  
Class 2  
Band 2.4GHz ~ 2.4835GHz unlicensed ISM band  
FHSS (Frequency Hopping Spread Spectrum)  
10 meters (32 feet)  
Spread Spectrum  
Operating Range  
Sensitivity  
-80dBm @0.1%BER  
Bluetooth Profile  
Headset,Handsfree,A2DP,AVRCP  
A2DP  
Stereo Audio  
Specification  
CD-Quality, 44.1, 48KHz 16-bit Stereo Audio Codec  
Standby Time  
Play Time  
Up to 100 hours  
Up to 100 hours  
Up to 5.5 hours  
2 ~ 3 hours  
Up to 5 hours  
2 ~ 3 hours  
Charging Time  
Talking Time  
Audio input  
Up to 6.5 hours  
--  
Bluetooth signal  
3.5 mm stereo jack  
2 LEDs : (Blue and red)  
3.5 mm stereo plug  
Bluetooth signal  
Audio Output  
LED Indicator  
2 LEDs :  
(Green and red) or (Blue and red)  
Battery  
Operation Temperature  
Storage Temperature  
Rechargeable Li-Polymer battery  
-10 ~ 55   
-20 ~ 60 ℃  
Humidity  
10% ~ 90% non-condensing  
Dimensions  
63.5x28.5x18.5mm(L x W x T), Including  
54.5x54.5x17.5mm(L x W x T)  
back clip  
Weight  
19 g  
29 g  
Embedded microphone,  
--  
Microphone  
(To avoid the noise interference, please put  
the microphone within 30 cm from your  
mouth while talking.)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BTH-820, BTA-830 user manual  
page 6  
BTH-820 button function  
Incoming call is  
While on the phone  
While playing the music  
with Bluetooth Dongle  
(AVRCP, A2DP profile).  
Play / Pause  
While playing the  
Button  
ringing  
music with BTA-830  
(A2DP profile)  
Play / Mute  
Answer  
Transfer to cell phone  
Hang up  
Refuse the call  
Stop  
Mute  
Answer  
Volume up  
Volume up  
Volume up  
Answer  
Volume down  
N/A  
Volume down  
Next  
Volume down  
Answer  
N/A  
Answer  
N/A  
Previous  
N/A  
Lock the buttons  
Lock the buttons  
To avoid the noise  
interference, please  
put the microphone  
within 30 cm from your  
mouth while talking.  
Lock the buttons  
Remote control  
(AVRCP) is supported  
under “Microsoft  
Window Media Player”.  
Lock the buttons  
--  
Remark 1 --  
Remark 2 When disconnected, you can connect to the previous paired cell phone by pressing the play key  
on BTH-820. You can disconnect them by pressing and holding the stop key for 2 seconds.  
If BTH-820 is connected only with a cell phone, you can perform the redial function by pressing  
and holding  
or  
for 2 seconds. You can initiate voice dialing by pressing and holding  
the play key for 2 seconds.  
LED indicator function  
BTH-820  
BTA-830  
Green(or Blue) LED flash once  
Green(or Blue) LED flash twice  
Green(or Blue) LED flash four times  
Green(or Blue) and red LED flash quickly by turns  
Red LED is on  
Status  
Standby  
Blue LED flash once  
Connecting  
Transferring  
Pairing  
Blue LED flash twice  
Blue LED flash four times  
Blue and red LED flash quickly by turns  
Red LED is on  
Low battery  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BTH-820, BTA-830 user manual  
page 7  
Turn on and off, pairing and charging the device  
BTH-820  
BTA-830  
Turn on  
Turn off:  
Pairing:  
Press the power button for 2 seconds until the  
blue LED is on.  
Press the power button for 2 seconds until the  
green(or blue) LED is on.  
Press the power button for 4 seconds until the  
red LED is on.  
Press the power button for 2 seconds until the  
red LED is on.  
While in the off mode, press the power button for 6 secondsthe 2-color LEDs will flash quickly by  
turns and it will search other device for pairing.  
Charging:  
Connect one end of the charging line to the USB socket of BTH-820 or BTA-830, and the other end  
to the USB socket of PC or power adapter. The red LED will be on when charging and will be off  
when battery is full. BTH-820 and BTA-830 will turn off itself when it is in the charging mode.  
Pairing procedure  
To pair  
Procedure  
Pairing  
password  
BTH-820 with  
--  
Press the power button for 6 seconds, the 2-color LEDs will flash  
alternately and they will search each other for pairing. If pairing is  
completed, LED will flash four times in every 2 seconds.  
BTA-830  
BTA-830 with another  
--  
Set the BTA-830 and your Bluetooth headset to pairing mode, these two  
devices will start to pair automatically. If pairing is completed, LED will  
flash four times in every 2 seconds.  
Bluetooth headset  
BTH-820 with a  
0000  
Set the BTH-820 into pairing mode. In your cell phone, enter the  
Bluetooth menu and select “search device” option. When your cell  
phone finds the BTH-820, select it to pair. If pairing is completed, red  
LED will be off, and only blue LED will flash, then you can connect your  
cell phone to BTH-820.  
Bluetooth cell phone  
BTH-820 with a PC  
0000  
Set the BTH-820 into pairing mode. Start the Bluetooth software(for  
example IVT BlueSoleil 1.6.2 or Widcomm) on your PC and select  
“search device”. After pairing is completed, you will be able to connect  
BTH-820 and listen to all the music from PC.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BTH-820, BTA-830 user manual  
page 8  
Troubleshooting  
Check the battery power.  
Make sure the devices are turned on.  
Make sure the devices have been paired.  
Make sure the devices are within the 10 meters range.  
Check the volume.  
Check if the audio resource is correctly input.  
Pair the devices over again.  
Can not connect with cell phone : Delete the BTH-820 device in your cell phone, re-start it and do the pairing  
again.  
Can not turn on the device : Do a Reset. Plug in the charging line to the device to enable the electric power  
passing by and then unplug it. That will perform the “Reset”.  
If BTH-820 works with Bluetooth USB dongle which uses IVT BlueSoleil version 1.6.2 or above, TOSHIBA  
version 3.03.10 or above, it will support A2DP, AVRCP, HEADSET profiles.  
If BTH-820 works with Bluetooth USB dongle which uses BROADCOM, WIDCOMM version 4.0.1.700 or above, it  
will support A2DP, AVRCP profiles.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Echo Paint Sprayer MS 40BP User Manual
Elation Professional Vacuum Cleaner PZ 720A User Manual
Fisher Price Motorized Toy Car T5003 User Manual
Fostex Recording Equipment DMT 8 User Manual
Frymaster Cooktop 8196692 User Manual
Fujitsu Printer FTP 621MCL101 User Manual
Furuno TV Converter Box AD 10S User Manual
Gaggenau Fryer VF 230 610 User Manual
GBC Laminator 1244WF User Manual
GE Microwave Oven PVM1870SM User Manual