2801330 User’s Manual
Mini-ITX Motherboard
Version 1.0
Download from Www.Somanuals.com. All Manuals Search And Download.
KINO-LX Motherboard
Chapter
1
1 Introduction
Page 15
Download from Www.Somanuals.com. All Manuals Search And Download.
KINO-LX Motherboard
1.1Motherboard Overview
1.1.1 Applications
ꢀ
ꢀ
ꢀ
ꢀ
Industrial PC applications
Human Machine Interface (HMI) applications
Marine, GPS and transportation applications
Financial, retail and kiosk applications
1.1.2 Beneꢀts
Some of the beneꢀts include:
ꢀ
ꢀ
Low power, high performance
Multiple storage option integration including
o 40 Pin IFM or 3.5” HDD
o 34 Pin floppy disk drive (FDD) support
o Dual SATA ports with RAID 0 and RAID 1 support
ꢀ
Data security SATA RAID support
1.1.3 Features
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Complies with mini-ITX form factor
Complies with RoHS
Embedded AMD™ Geode™ LX 800 CPU
Supports a maximum front side bus (FSB) speed up to 500MHz
DDR 333MHz up to 1GB
Complete I/O support with IDE, Dual LAN, 4 x USB2.0 and 6 x COM ports
Page 16
®
IEI Technology, Corp.
Download from Www.Somanuals.com. All Manuals Search And Download.
KINO-LX Motherboard
ꢀ
ꢀ
ꢀ
Supports 24-bit TTL LCD and single channel 18-bit LVDS LCD
Comes with two high performance 10/100MB Ethernet controllers
Supports two SATA channels with transfer rates up to 150Mb/s
1.2 Overview
Figure 1-1: Overview
1.2.1 Connectors
ꢀ
ꢀ
ꢀ
1 x 184-pin DDR DIMM socket
1 x AT/ATX power connector
1 x CD-IN connector
Page 17
Download from Www.Somanuals.com. All Manuals Search And Download.
KINO-LX Motherboard
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
2 x Fan connectors
1 x Floppy disk connector
1 x Front panel connector
1 x GPIO connector
2 x IDE Interface connectors
1 x Inverter power connector
1 x Keyboard/Mouse connector
1 x LCD LVDS interface Connector
1 x LCD TTL interface Connector
1 x RS-422/485 serial port connector
1 x PCI slot connector
4 x RS-232 serial port connectors
1 x RS-232/422/485 serial port connector
2 x SATA connectors
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
1 x Audio connector (two audio jacks)
2 x Ethernet connectors
2 x PS/2 keyboard/mouse connectors
1 x LPT port connector
1 x RS-232 serial port connector
4 x USB connectors
1 x VGA connector
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
AT/ATX power mode select
Clear CMOS
COM1/2 RI and voltage select
COM2 RS-232/422/485 select
LCD clock setup
LCD voltage select
The location of these connectors on the motherboard can be seen in Figure 1-1. These
connectors are fully described in Chapter 3.
Page 18
®
IEI Technology, Corp.
Download from Www.Somanuals.com. All Manuals Search And Download.
KINO-LX Motherboard
1.2.2 Technical Specifications
Technical speciꢀcations are listed in
Table 1-1 . Detailed descriptions of each
speciꢀcation can be found in Chapter 2 .
SPECIFICATION
CPUs Supported
Cache Memory
System Chipset
I/O Controller
Memory
DESCRIPTION
™
™
AMD Geode LX 800
64K I/ 64k D L1 cache, 128K L2 cache
™
AMD CS5536
™
AMD CS5536
One 184-pin DDR 333MHz DIMM up to 1GB
Revision 2.2
PCI Bus Interface
Super IO
W83627EHG
Display
CRT integrated in AMD™ LX 800
Single channel 18 bit LVDS integrated in AMD™ LX 800
24 bit TTL integrated in AMD LX 800
One IDE channel supports two
Ultra ATA 100/66/33 devices
ATX power support
LVDS
TTL
HDD Interface
Power Support
Power Consumption
+5V @ 1.45A, +12V @ 0.08A
LX-800, 500MHz, DDR 333MHz/512MHz MB-HCT
Supports Advanced Configuration and Power Interface
(ACPI) Specifications Revision 2.0
Software programmable supports
1~255 sec. system reset
Power Management
Watchdog Timer
Serial ATA (SATA)
Floppy Disk Drive (FDD)
USB Interfaces
Serial Ports
Two SATA channels with 150Mb/s transfer rates
Supports FDD
Four USB 2.0 connectors supported
Six RS-232 and one RS422/485 COM ports
Realtek ALC203
Audio Interfaces
PCI Interface
PCI slot connector
Real Time Clock
Hardware Monitoring
Ethernet
256-byte battery backed CMOS RAM
CPU temperature and system voltages
10/100 Base-T RTL8100C
BIOS
AWARD
Page 19
Download from Www.Somanuals.com. All Manuals Search And Download.
KINO-LX Motherboard
SPECIFICATION
Physical Dimensions
Operating Temperature
Operating Humidity
Weight
DESCRIPTION
170mm x 170mm
Minimum: 0ºC (32°F) - Maximum: 60°C (140°F)
Minimum: 5% - Maximum: 95%
Gross: 1.1Kg - Net: 500g
Table 1-1: Technical Specifications
Page 20
®
IEI Technology, Corp.
Download from Www.Somanuals.com. All Manuals Search And Download.
KINO-LX Motherboard
Chapter
2
2 Detailed Specifications
Page 21
Download from Www.Somanuals.com. All Manuals Search And Download.
KINO-LX Motherboard
2.1 CPU Support
The PCB has a preinstalled AMD LX 800 proc
AMD LX 800 processor are listed below:
essor. Technical speciꢀcations for the
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
x86/x87-compatible core
Processor frequency up to 500 MHZ
64K I/64K D L1 cache and 128K L2 cache
Split I/D cache/TLB (Translation Look-Aside Buffer)
64-bit DDR Memory interface. 333MHz DDR memory supported
Integrated FPU that supports the Intel MMX® and AMD 3DNow!™
Technology instruction sets
ꢀ
ꢀ
9 GB/s internal GeodeLink™ Interface Unit (GLIU)
Security Block
o 128-bit AES (CBC/ECB)
o True Random Number Generator
ꢀ
High-resolution CRT and TFT outputs (simultaneous operation)
o Support for High Definition (HD) and Standard Definition (SD) standards
o Support 1920x1440 in CRT mode and 1600x1200 in TFT mode
VESA 1.1 and 2.0 VIP/VDA support
ꢀ
ꢀ
ꢀ
0.13 micron process
481-terminal PBGA (Plastic Ball Grid Array) with internal heatspreader
Power management features for the AMD LX 800 processor are listed below:
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
1.8W Typical (3.9W TDP) @ 500MHz
GeodeLink active hardware power management
Hardware support for standard ACPI software power management
I/O companion SUSP#/SUSPA# power controls
Lower power I/O
Wakeup on SMI/INTR
2.2 System Chipset
The PCB motherboard has an AMD Geode™ CS5536 chipset installed. The AMD
Geode™ CS5536 is a companion device for the AMD Geode™ LX 800 to create a
high-performance, low- power x86 solution for embedded applications.
Page 22
®
IEI Technology, Corp.
Download from Www.Somanuals.com. All Manuals Search And Download.
KINO-LX Motherboard
Technical specifications of the AMD Geode™ CS5536 chipset are listed below. For more
information on these two chipsets please refer to the AMD website.
ꢀ
GeodeLink™ Interface Unit:
o 64-bit, 66MHz operation
o PCI VSM (Virtual System Module) that makes the interface transparent to
applications software and BIOS
o Programmable routing descriptors, use and activity monitors, and SSMI
(Synchronous System Management Interrupt)
ATA-6 Controller:
ꢀ
o 100 MB/second IDE Controller in UDMA mode per the ATA-6
specification
o 5V interface
Flash Interface:
ꢀ
ꢀ
o Multiplexed with IDE interface Connects to an array of industry standard
NAND Flash and/or NOR Flash
USB Controller:
o 4 USB ports
o Supports both USB 1.1 and USB 2.0
o 3 host ports
o 1 host/device
ꢀ
ꢀ
Audio Codec 97 (AC97) Controller:
o AC97 specification v2.3 compliant interface to multiple audio codecs:
Serial In, Serial Out, Sync Out, Bit Clock In
o Legacy “PC Beep” support
Diverse Device:
o 82xx Legacy Devices
o IR Communication Port
o System Management Bus (SMB) Controller
o LPC (Low Pin Count) Port
o General Purpose I/Os (GPIOs)
o 8 Multi-Function General Purpose Timers (MFGPTs)
o Real-Time Clock (RTC) with CMOS RAM
Power Management Controller:
ꢀ
o ACPI v2.0 compliant
Page 23
Download from Www.Somanuals.com. All Manuals Search And Download.
KINO-LX Motherboard
2.3 Graphics Support
Feature
AMD Geode™ LX Processor
Color Depth
8, 16, 32 bpp (A) RGB 4 and 8-bit indexed
ROPs
256 (2-src, dest and pattern)
BLT Buffers
FIFOs in Graphics Processor
BLT Splitting
Managed by hardware
Video Synchronized BLT/Vector
Bresenham Lines
Patterned (stippled) Lines
Screen to Screen BLT
Screen to Screen BLT with mono expansion
Memory to Screen BLT
Accelerated Text
Throttle by VBLANK
Yes
Yes
Yes
Yes
Yes (throttled rep movs writes)
No
Pattern Size (Mono)
Pattern Size (Color)
Monochrome Pattern
Dithered Pattern (4 color)
Color Pattern
8x8 pixels
8x8 pixels
Yes (with inversion)
No
8, 16, 32 bpp
Monochrome
Yes
Transparent Pattern
Solid Fill
Pattern Fill
Yes
Transparent Source
Color Key Source Transparency
Monochrome
Y with mask
Page 25
Download from Www.Somanuals.com. All Manuals Search And Download.
KINO-LX Motherboard
Feature
AMD Geode™ LX Processor
Variable Source Stride
Variable Destination Stride
Destination Write Bursting
Selectable BLT Direction
Alpha BLT
Yes
Yes
Yes
Vertical and Horizontal
Yes (constant α, α/pix, or sep. α channel)
Decodes VGA Register
Unlimited
VGA Support
Pipeline Depth
Accelerated Rotation BLT
Color Depth Conversion
8, 16, 32 bpp
5:6:5, 1:5:5:5, 4:4:4:4, 8:8:8:8
Table 2-1: Geode LX Graphics Processor Features
2.4 Memory Support
Up to 1GB of DDR 333 MHz DIMM is supported.
2.5 Super I/O
ꢀ
General
o Meet LPC Spec. 1.01
o Support LDRQ#(LPC DMA), SERIRQ (Serial IRQ)
o Integrated Hardware Monitor functions
o Compliant with Microsoft PC2000/PC2001 Hardware Design Guide
o Support DPM (Device Power Management), ACPI
o Programmable configuration settings
o Single 24 or 48 MHz clock input
o It is 3.3V level but 5V tolerance support
•
Besides LPC function pins(Pin21 ~ Pin30) and H/W monitor
analog pins(Pin95 ~ Pin110)
•
Input level can up to 5V and maximum input level can be up to
5V+10%
ꢀ
FDC
Page 26
®
IEI Technology, Corp.
Download from Www.Somanuals.com. All Manuals Search And Download.
KINO-LX Motherboard
o Compatible with IBM PC AT disk drive systems
o Variable write pre-compensation with track selectable capability
o Support vertical recording format
o DMA enable logic
o 16-byte data FIFOs
o Support floppy disk drives and tape drives
o Detects all overrun and underrun conditions
o Built-in address mark detection circuit to simplify the read electronics
o FDD anti-virus functions with software write protect and FDD write enable
signal (write data signal was forced to be inactive)
o Support up to four 3.5-inch or 5.25-inch floppy disk drives
o Completely compatible with industry standard 82077
o 360K/720K/1.2M/1.44M/2.88M format; 250K, 300K, 500K, 1M, 2M bps
data transfer rate
o Support 3-mode FDD, and its Win95/98 driver
ꢀ
UART
o Two high-speed 16550 compatible UARTs with 16-byte send/receive
FIFOs
o MIDI compatible
o Fully programmable serial-interface characteristics:
•
•
•
5, 6, 7 or 8-bit characters
Even, odd or no parity bit generation/detection
1, 1.5 or 2 stop bits generation
o Internal diagnostic capabilities:
•
Loop-back controls for communications link fault isolation
•
Break, parity, overrun, framing error simulation
o Programmable baud rate generator allows division of 1.8461 MHz and 24
MHz by 1 to (216-1)
o Maximum baud rate up to 921k bps for 14.769 MHz and 1.5M bps for 24
MHz
ꢀ
Infrared
o Support IrDA version 1.0 SIR protocol with maximum baud rate up to
115.2K bps
o Support SHARP ASK-IR protocol with maximum baud rate up to 57,600
bps
ꢀ
Parallel Port
Page 27
Download from Www.Somanuals.com. All Manuals Search And Download.
KINO-LX Motherboard
o Compatible with IBM parallel port
o Support PS/2 compatible bi-directional parallel port
o Support Enhanced Parallel Port (EPP) - Compatible with IEEE 1284
specification
o Support Extended Capabilities Port (ECP) - Compatible with IEEE 1284
specification
o Enhanced printer port back-drive current protection
ꢀ
ꢀ
Game Port
o Support two separate Joysticks
o Support every Joystick two axis (X, Y) and two button (A, B) controllers
MIDI Port
o The baud rate is 31.25 K baud
o 16-byte input FIFO
o 16-byte output FIFO
Keyboard Controller
ꢀ
o 8042 based with optional F/W from AMIKKEYTM-2, Phoenix
MultiKey/42TM or customer code with 2K bytes of programmable ROM,
and 256 bytes of RAM
o Asynchronous Access to Two Data Registers and One status Register
o Software compatibility with the 8042
o Support PS/2 mouse
o Support port 92
o Support both interrupt and polling modes
o Fast Gate A20 and Hardware Keyboard Reset
o 8 Bit Timer/ Counter
o Support binary and BCD arithmetic
o 6 MHz, 8 MHz, 12 MHz, or 16 MHz operating frequency
Serial Flash ROM Interface
ꢀ
ꢀ
o Support up to 8M bits flash ROM
General Purpose I/O Ports
o 48 programmable general purpose I/O ports
o GPIO port 1 and 4 can not only serve as simple I/O ports but also watch
dog timer output, Power LED output, Suspend LED output
o Functional in power down mode (GP24 ~ GP27, GPIO-3, GPIO-4,
GPIO-5)
ꢀ
OnNow Functions
Page 28
®
IEI Technology, Corp.
Download from Www.Somanuals.com. All Manuals Search And Download.
KINO-LX Motherboard
o Keyboard Wake-Up by programmable keys
o Mouse Wake-Up by programmable buttons
o On Now Wake-Up from all of the ACPI sleeping states (S1-S5)
ꢀ
Hardware Monitor Functions
o Smart Fan control system, support SMART FANTM I - “Thermal
CruiseTM” and “Speed CruiseTM” Mode , SMART FANTM III function
o 3 thermal inputs from optionally remote thermistors or PentiumTM II/III/4
thermal diode output
o 10 voltage inputs (CPUVCORE, VIN[0..4] and intrinsic 3VCC, AVCC ,
3VSB, VBAT)
o 5 fan speed monitoring inputs
o 4 fan speed control
o Dual mode for fan control (PWM & DC)
o Build in case open detection circuit
o Programmable hysteresis and setting points for all monitored items
o Over temperature indicate output
o Issue SMI#, OVT# to activate system protection
o Winbond Hardware DoctorTM Support
o 6 VID inputs / outputs
o Provide I2C interface to read/write registers
Package
ꢀ
o 128-pin PQFP
2.6 Ethernet Controller
The Realtek RTL8100C is a single-chip Fast Ethernet controller. It is enhanced with an
ACPI (Advanced Configuration Power Interface) management function for PCI in order to
provide efficient power management for advanced operating systems with OSPM
(Operating System Directed Power Management). The RTL8100C also supports remote
wake-up (including AMD Magic Packet™ and Microsoft® Wake-up frame). Realtek
RTL8100C features are listed below.
ꢀ
ꢀ
ꢀ
128-pin PQFP/LQFP
Supports PCI/mini-PCI interfaces
Integrates Fast Ethernet MAC, physical chip, and transceiver onto a single
chip
Page 29
Download from Www.Somanuals.com. All Manuals Search And Download.
KINO-LX Motherboard
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
10Mbps and 100Mbps operation
Supports 10Mbps and 100Mbps N-way auto-negotiation
Supports 25MHz Crystal or 25MHz OSC as the internal clock source
Complies with PC99/PC2001 standards
Supports ACPI power management
Provides PCI bus master data transfer
Provides PCI memory space or I/O space mapped data transfer
Supports PCI clock speed of 16.75MHz-40MHz
Advanced power saving mode
Supports Wake-on-LAN and remote wake-up (AMD Magic Packet™, Link
Change, and Microsoft® Wake-up frame)
ꢀ
ꢀ
ꢀ
Half/Full duplex capability
Supports Full Duplex Flow Control (IEEE 802.3x)
Provides interface to 93C46 EEPROM to store resource configuration and ID
parameters
ꢀ
ꢀ
ꢀ
ꢀ
Provides PCI clock run pin
Provides LED pins for network operation status indication
2.5/3.3V power supply with 5V tolerant I/Os
0.25µm CMOS process
2.7 Drive Interfaces
ꢀ
ꢀ
ꢀ
2 x SATA drives
2 x IDE devices
1 x FDD
2.7.1 SATA Drive Interface
Supports two, ꢀrst generation
150Mb/s.
SATA drives with transfer rates of up to
Page 30
®
IEI Technology, Corp.
Download from Www.Somanuals.com. All Manuals Search And Download.
KINO-LX Motherboard
2.7.2 IDE HDD Interface
ꢀ
100 MB/second IDE Controller in UDMA mode per the ATA-6 specification
2.7.3 Floppy Disk Drive (FDD) Interface
ꢀ
ꢀ
5.25”: 360KB and 1.2MB
3.5”: 720KB, 1.44MB and 2.88MB
2.8 Serial Ports
ꢀ
ꢀ
16C550 UART with 16/32 byte selectable FIFO buffer
115.2Kbps transmission rate
2.9 Audio Codec
The PCB has an integrated REALTEK ALC203 CODEC. The ALC203 is a 20-bit DAC
and 18-bit ADC full-duplex AC'97 2.3 compatib le stereo audio CODEC designed for PC
multimedia systems, including host/soft audio, and AMR/CNR based designs. ALC203
features are listed below.
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Single chip with high S/N ratio (>100 dB)
Meets performance requirements for audio on PC2001 systems
Meets Microsoft WHQL/WLP 2.0 audio requirements
20-bit DAC and 18-bit ADC resolution
18-bit Stereo full-duplex CODEC with independent and variable sampling rate
Complies with AC'97 2.3 specifications
o LINE/HP-OUT, MIC-IN and LINE-IN sensing
o 14.318MHz -> 24.576MHz PLL saves crystal
Page 31
Download from Www.Somanuals.com. All Manuals Search And Download.
KINO-LX Motherboard
o 12.288MHz BITCLK input can be consumed
o Integrated PCBEEP generator to save buzzer
o Interrupt capability
o Page registers and Analog Plug & Play
ꢀ
ꢀ
Support of S/PDIF out is fully compliant with AC'97 rev2.3 specifications
Three analog line-level stereo inputs with 5-bit volume control: LINE_IN, CD,
AUX
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
High quality differential CD input
Two analog line-level mono input: PCBEEP, PHONE-IN
Supports double sampling rate (96KHz) of DVD audio playback
Two software selectable MIC inputs
+6/12/20/30dB boost preamplifier for MIC input
Stereo output with 6-bit volume control
Mono output with 5-bit volume control
Headphone output with 50mW/20Ohm amplifier
3D Stereo Enhancement
Multiple CODEC extension capability
External Amplifier Power Down (EAPD) capability
Power management and enhanced power saving features
Stereo MIC record for AEC/BF application
DC Voltage volume control
Auxiliary power to support Power Off CD
Adjustable VREFOUT control
2 GPIO pins with smart GPIO volume control
2 Universal Audio Jacks (UAJ)® for front panel
Supports 32K/44.1K/48K/96KHz S/PDIF output
Supports 32K/44.1K/48KHz S/PDIF input
Power support: Digital: 3.3V; Analog: 3.3V/5V
Standard 48-Pin LQFP Package
EAX™ 1.0 & 2.0 compatible
Direct Sound 3D™ compatible
A3D™ compatible
I3DL2 compatible
HRTF 3D Positional Audio
Sensaura™ 3D Enhancement (optional)
10 Bands of Software Equalizer
Page 32
®
IEI Technology, Corp.
Download from Www.Somanuals.com. All Manuals Search And Download.
KINO-LX Motherboard
ꢀ
ꢀ
Voice Cancellation and Key Shifting in Karaoke mode
AVRack® Media Player
2.10 Real Time Clock
256-byte battery backed CMOS RAM
2.11 System Monitoring
ꢀ
ꢀ
CPU, chipset, and battery voltage, +5V, and +12V
CPU and board temperatures (by the corresponding embedded sensors)
2.12 BIOS
The PCB uses a licensed copy of Phoeni
BIOS used are listed below:
x Award BIOS. The features of the ꢀash
ꢀ
ꢀ
ꢀ
ꢀ
SMIBIOS (DMI) compliant
Console redirection function support
PXE (Pre-Boot Execution Environment) support
USB booting support
2.13 Operating Temperature and Temperature Control
The maximum and minimum operating temperatures for the motherboard are
listed below.
ꢀ
ꢀ
Minimum Operating Temperature: 0ºC (32°F)
Maximum Operating Temperature: 60°C (140°F)
A cooling heat sink is installed on the CPU. Thermal paste is smeared on the lower side of
the heat sink before it is mounted on the CPU.
Page 33
Download from Www.Somanuals.com. All Manuals Search And Download.
KINO-LX Motherboard
2.14 Power Consumption
Table 2-2 shows the power consumption parameters for the when an AMD
LX-800 CPU is running with a 333 MHz, 256MB DDR RAM module.
Voltage
+5V
Current
1.45A
+12V
0.08A
Table 2-2: Power Consumption
2.15 PXE: Pre-Boot Execution Environment
PXE is an open industry standard developed by a number of software and hardware
vendors. IEI BIOS PXE feature allows a workstation to boot from a server on a network by
receiving a pre-OS agent prior to booting the operating system on the local hard drive.
Figure 2-2: PXE: Pre-Boot Execution Environment
Page 34
®
IEI Technology, Corp.
Download from Www.Somanuals.com. All Manuals Search And Download.
KINO-LX Motherboard
2.16 Packaged Contents and Optional Accessory Items
2.16.1 Package Contents
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
1 x Mini jumper pack
1 x ATA66/100 flat cable
2 x Dual RS-232 cables
2 x SATA cables
1 x SATA Power cable
1 x I/O Shielding
1 x Utility CD
1 x QIG (quick installation guide)
2.16.2 Optional Accessory Items
The items shown in the list below are optional accessory items purchased separately.
ꢀ
RS-23/422/485 cable
Page 35
Download from Www.Somanuals.com. All Manuals Search And Download.
KINO-LX Motherboard
Chapter
3
3 Connectors and
Jumpers
Page 37
Download from Www.Somanuals.com. All Manuals Search And Download.
KINO-LX Motherboard
3.1 Peripheral Interface Connectors
Section 3.1.1 shows peripheral interface connector locations. Section 3.1.2 lists all the
3.1.1 Layout
Figure 3-1 shows the on-board peripheral connectors and on-board jumpers.
Figure 3-1: Connector and Jumper Locations
3.1.2 Peripheral Interface Connectors
Page 38
®
IEI Technology, Corp.
Download from Www.Somanuals.com. All Manuals Search And Download.
KINO-LX Motherboard
Connector
Type
Label
AT/ATX power connector
CD-IN connector
20-pin header
CN19
CN9
4-pin header
DIMM socket
184-pin socket
CN22
CN23
CN21
CN26
CN24
CN18
CN29
CN28
CN12
CN2
5V Fan connector
3-pin box header
3-pin header
12V Fan connector
FDD connector
34-pin box header
14-pin header
Front Panel connector
GPIO connector
10-pin header
IDE Interface connector (Primary)
IDE Interface connector (Secondary)
Inverter Power connector
Keyboard/Mouse connector
LCD TTL connector
40-pin box header
40-pin box header
5-pin wafer connector
6-pin wafer connector
40-pin crimp connector
20-pin crimp connector
128-pin PCI slot
14-pin header
CN11
CN13
CN20
CN10
CN14
CN15
CN16
CN17
CN30
CN31
LCD LVDS connector
PCI slot
RS-232/485 COM-2 serial port connector
RS-232 COM-3 serial port connector
RS-232 COM-4 serial port connector
RS-232 COM-5 serial port connector
RS-232 COM-6 serial port connector
SATA-1 drive connector
SATA-2 drive connector
10-pin header
10-pin header
10-pin header
10-pin header
7-pin SATA connector
7-pin SATA connector
Table 3-1: Peripheral Interface Connectors
Page 39
Download from Www.Somanuals.com. All Manuals Search And Download.
KINO-LX Motherboard
3.1.3 External Peripheral Interface Connectors
Connector
Type
Label
Audio connector
2 x audio jacks
CN8
Ethernet and USB combo connector
Ethernet and USB combo connector
Keyboard/mouse connector
Parallel port
RJ-45 and USB 2.0 connectors
RJ-45 and USB 2.0 connectors
Dual PS/2 connector
CN6
CN7
CN1
CN5
CN3
CN4
DB-25 female connector
RS-232 serial port connector
VGA connector
D-sub 9 male connector
HD-D-sub 15 female connector
Table 3-2: Rear Panel Connectors
3.1.4 On-board Jumpers
Table 3-3 lists the on-board jumpers. Detailed descriptions of these jumpers can be found
in Section 4.5.
Description
Label
JP4
JP3
JP2
JP1
JP5
JP6
Type
Clear CMOS
3-pin header
3-pin header
6-pin header
10-pin header
3-pin header
2-pin header
LCD voltage select
COM2 RS-232/422/485 select
COM1/2 RI and voltage select
LCD clock setup
AT/ATX power mode select
Table 3-3: On-board Jumpers
Page 40
®
IEI Technology, Corp.
Download from Www.Somanuals.com. All Manuals Search And Download.
KINO-LX Motherboard
3.2 Internal Peripheral Connectors
Internal peripheral connectors are found on the motherboard and are only accessible
when the motherboard is outside of the chassi s. This section has complete descriptions of
all the internal peripheral connectors.
3.2.1 AT/ATX Power Connector
CN Label:
CN19
CN Type:
20-pin connector
See Figure 3-2
See Table 3-4
CN Location:
CN Pinouts:
The ATX Power connector is connected to an ATX or AT power supply.
Figure 3-2: AT/ATX Power Connector Pinouts
Page 41
Download from Www.Somanuals.com. All Manuals Search And Download.
KINO-LX Motherboard
PIN
11
12
13
14
15
16
17
18
19
20
DESCRIPTION
NC
PIN
1
DESCRIPTION
NC
-12V
GND
2
NC
3
GND
PSON
GND
4
+5V
5
GND
GND
6
+5V
GND
7
GND
NC
8
PW-OK
+5VSB
+12V
+5V
9
+5V
10
Table 3-4: AT/ATX Power Connector Pinouts
®
IEI Technology, Corp.
Download from Www.Somanuals.com. All Manuals Search And Download.
KINO-LX Motherboard
3.2.2 CD-IN Connector
CN Label:
CN9
CN Type:
4-pin header
See Figure 3-3
See Table 3-5
CN Location:
CN Pinouts:
The CD-In connector connects to audio sources such as CD/DVD-ROM optical drives.
Figure 3-3: CD-IN Connector Pinout Locations
PIN DESCRIPTION
1
2
3
4
CD-L
GND
GND
CD-R
Table 3-5: CD-IN Connector Pinouts
Page 43
Download from Www.Somanuals.com. All Manuals Search And Download.
KINO-LX Motherboard
3.2.3 5V Fan Connector
CN Label:
CN23
CN Type:
3-pin wafer
See Figure 3-4
See Table 3-6
CN Location:
CN Pinouts:
The cooling fan connector provides a 5V current to a system cooling fan. The connector
has a "rotation" pin to get rotation signals from fans and notify the system so the system
BIOS can recognize the fan speed. Please note that only specified fans can issue the
rotation signals.
Figure 3-4: 5V Fan Connector Pinout Locations
PIN
DESCRIPTION
1
2
3
GND
+5V
Fan Speed Detect
Table 3-6: 5V Fan Connector Pinouts
Page 44
®
IEI Technology, Corp.
Download from Www.Somanuals.com. All Manuals Search And Download.
KINO-LX Motherboard
3.2.4 12V Fan Connector
CN Label:
CN21
CN Type:
3-pin wafer
See Figure 3-5
See Table 3-7
CN Location:
CN Pinouts:
The cooling fan connector provides a 12V, 500mA current to a system cooling fan. The
connector has a "rotation" pin to get rotation signals from fans and notify the system so the
system BIOS can recognize the fan speed. Please note that only specified fans can issue
the rotation signals.
Figure 3-5: Fan Connector Pinout Locations
PIN
DESCRIPTION
1
2
3
GND
+12V
Fan Speed Detect
Table 3-7: Fan Connector Pinouts
Page 45
Download from Www.Somanuals.com. All Manuals Search And Download.
KINO-LX Motherboard
3.2.5 Floppy Disk Connector
CN Label:
CN26
CN Type:
34-pin box header
See Figure 3-6
See Table 3-8
CN Location:
CN Pinouts:
The floppy disk connector connects to a floppy disk drive.
Figure 3-6: FDD Pinout Locations
Page 46
®
IEI Technology, Corp.
Download from Www.Somanuals.com. All Manuals Search And Download.
KINO-LX Motherboard
PIN
1
DESCRIPTION
GND
PIN
2
DESCRIPTION
DENSEL
NC
3
GND
4
5
GND
6
NC
7
GND
8
INDEX#
MOA#
9
GND
10
12
14
16
18
20
22
24
26
28
30
32
34
11
13
15
17
19
21
23
25
27
29
31
33
GND
NC
GND
DSA#
GND
NC
GND
DIR#
GND
STEP#
WDATA#
WGATE#
TRACK0#
WP#
GND
GND
GND
GND
GND
RDATA#
HEAD#
DSKCHG#
GND
GND
Table 3-8: FDD Connector Pinouts
3.2.6 Front Panel Connector
CN Label:
CN24
CN Type:
14-pin header (2x7 pins)
See Figure 3-7
See Table 3-9
CN Location:
CN Pinouts:
The front panel connector connects to several external switches and indicators to monitor
and controls the motherboard. These indicators and switches include:
ꢀ
ꢀ
ꢀ
Power button
Reset button
Speaker
Page 47
Download from Www.Somanuals.com. All Manuals Search And Download.
KINO-LX Motherboard
ꢀ
ꢀ
Power LED
HDD LED
Figure 3-7: Front Panel Connector Pinout Locations
PIN
1
DESCRIPTION
PWRLED+
NC
PIN
2
DESCRIPTION
Buzzer+(+5V)
NC
3
4
5
PWRLED-
PWRBTN#
GND
6
NC
7
8
Buzzer-
NC
9
10
12
14
11
13
HDDLED+
HDDLED-
SYS_RST#
GND
Table 3-9: Front Panel Connector Pinouts
Page 48
®
IEI Technology, Corp.
Download from Www.Somanuals.com. All Manuals Search And Download.
KINO-LX Motherboard
3.2.7 GPIO Connector
CN Label:
CN18
CN Type:
10-pin header (2x5 pins)
See Figure 3-8
See Table 3-10
CN Location:
CN Pinouts:
The General Purpose Input Output (GPIO) connector can be connected to external I/O
control devices including sensors, lights, alarms and switches.
Figure 3-8: GPIO Connector Pinout Locations
PIN
DESCRIPTION
PIN
DESCRIPTION
1
3
5
7
9
GND
2
+5V
GPO0
GPO2
GPI0
GPI2
4
GPO1
GPO3
GPI1
GPI3
6
8
10
Table 3-10: GPIO Connector Pinouts
Page 49
Download from Www.Somanuals.com. All Manuals Search And Download.
KINO-LX Motherboard
3.2.8 IDE Connectors
CN Label:
CN29 (Primary) and CN28 (Secondary)
CN Type:
40-pin header (2x20)
See Figure 3-9
CN Location:
CN Pinouts:
See Table 3-11
Page 50
®
IEI Technology, Corp.
Download from Www.Somanuals.com. All Manuals Search And Download.
KINO-LX Motherboard
PIN
1
DESCRIPTION
RESET#
D7
PIN
2
DESCRIPTION
GND
D8
3
4
5
D6
6
D9
7
D5
8
D10
9
D4
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
D11
11
13
15
17
19
21
23
25
27
29
31
33
35
37
39
D3
D12
D2
D13
D1
D14
D0
D15
GND
DRQ
IOW#
IOR#
RDY
ACK#
INT
NC
GND
GND
GND
NC
GND
NC
A1
CABLEID
A2
A0
CS0#
ASP#
CS1#
GND
Table 3-11: IDE Connector Pinouts
Page 52
®
IEI Technology, Corp.
Download from Www.Somanuals.com. All Manuals Search And Download.
KINO-LX Motherboard
3.2.9 Inverter Power Connector
CN Label:
CN12
CN Type:
5-pin wafer
CN Location:
CN Pinouts:
See Figure 3-10
See Table 3-12
The inverter connector is connected to the LCD backlight.
Figure 3-10: Inverter Connector Locations
PIN
1
DESCRIPTION
ADJ (Def : GND)
GND
2
3
+12V
4
GND
5
BL_EN
Table 3-12: Inverter Power Connector Pinouts
Page 53
Download from Www.Somanuals.com. All Manuals Search And Download.
KINO-LX Motherboard
3.2.10 Keyboard/Mouse Connector
CN Label:
CN2
CN Type:
6-pin wafer
See Figure 3-11
See Table 3-13
CN Location:
CN Pinouts:
For alternative applications, an on board keyboard/mouse pin header connector is also
available.
Figure 3-11: Keyboard/Mouse Connector Location
PIN
1
DESCRIPTION
+5V
2
MSDATA
MSCLK
3
4
KBDATA
KBCLK
5
6
GND
Table 3-13: Keyboard/Mouse Connector Pinouts
Page 54
®
IEI Technology, Corp.
Download from Www.Somanuals.com. All Manuals Search And Download.
KINO-LX Motherboard
3.2.11 LCD LVDS Connector
CN Label:
CN13
CN Type:
20-pin crimp connector
See Figure 3-12
See Table 3-14
CN Location:
CN Pinouts:
The LCD LVDS connector is connected to a LCD LVDS display device.
Figure 3-12: LCD LVDS Connector Locations
Page 55
Download from Www.Somanuals.com. All Manuals Search And Download.
KINO-LX Motherboard
PIN
2
DESCRIPTION
GND
PIN
1
DESCRIPTION
GND
4
D0-
3
D0+
6
D1-
5
D1+
8
D2-
7
D2+
10
12
14
16
18
20
CLK-
9
CLK+
NC
11
13
15
17
19
NC
GND
GND
SCL
SDA
LCD_VCC
LCD_VCC
LCD_VCC
LCD_VCC
Table 3-14: LCD LVDS Connector Pinouts
Page 56
®
IEI Technology, Corp.
Download from Www.Somanuals.com. All Manuals Search And Download.
KINO-LX Motherboard
3.2.12 LCD TTL Connector
CN Label:
CN11
CN Type:
40-pin crimp connector
See Figure 3-13
See Table 3-15
CN Location:
CN Pinouts:
The LCD TTL connector is connected to a LCD TTL display device.
Figure 3-13: LCD TTL Connector Locations
Page 57
Download from Www.Somanuals.com. All Manuals Search And Download.
KINO-LX Motherboard
PIN
2
DESCRIPTION
PIN
1
DESCRIPTION
LCD_VCC
GND
LCD_VCC
GND
B1
LCD_VCC
GND
LCD_VCC
SDA
B0
4
3
6
5
8
7
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
9
B3
11
13
15
17
19
21
23
25
27
29
31
33
35
37
39
B2
B5
B4
B7
B6
G1
G0
G3
G2
G5
G4
G7
G6
R1
R0
R3
R2
R5
R4
R7
R6
GND
VSYNC
HSYNC
DISP_EN
GND
CLK
LCD_EN
SCL
Table 3-15: LCD TTL Connector Pinouts
3.2.13 PCI Slot
CN Label:
CN20
CN Type:
PCI slot
CN Location:
CN Pinouts:
See Figure 3-14
See Table 3-16
The PCI slot enables a PCI expansion module to be connected to the board.
Page 58
®
IEI Technology, Corp.
Download from Www.Somanuals.com. All Manuals Search And Download.
KINO-LX Motherboard
PIN
A3
DESCRIPTION
TMS
PIN
B3
DESCRIPTION
GND
A4
TDI
B4
TDO
A5
+5V
B5
+5V
A6
INTA
B6
+5V
A7
INTC
B7
INTB
A8
+5V
B8
INTD
A9
RESERVED3
+5V
B9
PRSNT1
RESERVED1
PRSNT2
GND
A10
A11
A12
A13
A14
A15
A16
A17
A18
A19
A20
A21
A22
A23
A24
A25
A26
A27
A28
A29
A30
A31
A32
A33
A34
B10
B11
B12
B13
B14
B15
B16
B17
B18
B19
B20
B21
B22
B23
B24
B25
B26
B27
B28
B29
B30
B31
B32
B33
B34
RESERVED4
GND
GND
GND
3.3V_AUX
RST
RESERVED2
GND
+5V
CLK
GNT
GND
GND
REQ
PME
+5V
AD30
+3.3V
AD28
AD26
GND
AD31
AD29
GND
AD27
AD25
+3.3V
C/BE3
AD23
GND
AD24
IDSEL
+3.3V
AD22
AD20
GND
AD21
AD19
+3.3V
AD17
C/BE2
GND
AD18
AD16
+3.3V
FRAME
Page 60
®
IEI Technology, Corp.
Download from Www.Somanuals.com. All Manuals Search And Download.
KINO-LX Motherboard
PIN
A35
A36
A37
A38
A39
A40
A41
A42
A43
A44
A45
A46
A47
A48
A49
A52
A53
A54
A55
A56
A57
A68
A59
A60
A61
A62
DESCRIPTION
GND
PIN
B35
B36
B37
B38
B39
B40
B41
B42
B43
B44
B45
B46
B47
B48
B49
B52
B53
B54
B55
B56
B57
B68
B59
B60
B61
B62
DESCRIPTION
IRDY
+3.3V
DEVSEL
GND
TRDY
GND
STOP
+3.3V
SDONE
SBO
LOCK
PERR
+3.3V
SERR
+3.3V
C/BE1
AD14
GND
GND
PAR
AD15
+3.3V
AD13
AD11
GND
AD12
AD10
GND
AD9
C/BE0
+3.3V
AD6
AD8
AD7
+3.3V
AD5
AD4
GND
AD3
AD2
GND
AD0
AD1
+5V
+5V
REQ64
+5V
ACK64
+5V
+5V
+5V
Table 3-16: PCI Slot
Page 61
Download from Www.Somanuals.com. All Manuals Search And Download.
KINO-LX Motherboard
3.2.14 RS-232/422/485 Serial Port Connector
CN Label:
CN10
CN Type:
2x7 pin header
See Figure 3-15
See Table 3-17
CN Location:
CN Pinouts:
The CN10 serial port connector connects to an RS-232 or RS-485 serial port devices.
Figure 3-15: RS-232/422/485 Serial Port Connector Pinout Locations
PIN
1
DESCRIPTION
DCD#
PIN
2
DESCRIPTION
DSR#
3
RxD
4
RTS#
5
TxD
6
CTS#
7
DTR#
8
RI# / Vout
GND
9
GND
10
12
14
11
13
TxD485+
RxD485+
TxD485-
RxD485-
Table 3-17: RS-232/422/485 Serial Port Connector Pinouts
Page 62
®
IEI Technology, Corp.
Download from Www.Somanuals.com. All Manuals Search And Download.
KINO-LX Motherboard
3.2.15 RS-232 COM Serial Port Connector
CN Label:
COM3, COM4, COM5 and COM6
10-pin header (2x5)
See Figure 3-16
CN Type:
CN Location:
CN Pinouts:
See Table 3-18
The COM3, COM4, COM5 and COM6 serial port connectors connect to RS-232 serial port
devices.
Figure 3-16: RS-232 Serial Port Connector Pinout Locations
Page 63
Download from Www.Somanuals.com. All Manuals Search And Download.
KINO-LX Motherboard
PIN
DESCRIPTION
PIN
DESCRIPTION
1
2
3
4
5
DCD
RXD
TXD
DTR
GND
6
DSR
RTS
CTS
RI
7
8
9
10
GND
Table 3-18: RS-232 Serial Port Connector Pinouts
3.2.16 SATA Drive Connectors
CN Label:
CN30 and CN31
CN Type:
1x7 pin SATA drive connectors
See Figure 3-17
CN Location:
CN Pinouts:
See Table 3-19
The two SATA drive connectors are connected to two first generation SATA drives. First
generation SATA drives transfer data at speeds as high as 150Mb/s.
Figure 3-17: SATA Drive Connector Pinout Locations
Page 64
®
IEI Technology, Corp.
Download from Www.Somanuals.com. All Manuals Search And Download.
KINO-LX Motherboard
PIN
DESCRIPTION
1
2
3
4
5
6
7
GND
TX+
TX-
GND
RX-
RX+
GND
Table 3-19: SATA Drive Connector Pinouts
3.3 External Peripheral Interface Connector Panel
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
1 x PS/2 keyboard and mouse connector
1 x Serial port connector
1 x Parallel port connector
1 x VGA connector
2 x RJ-45 GbE connector
4 x USB connectors
1 x Audio connector (two audio jacks)
Page 65
Download from Www.Somanuals.com. All Manuals Search And Download.
KINO-LX Motherboard
3.3.1 Keyboard/Mouse Connector
CN Label:
CN8
CN Type:
Dual PS/2
CN Location:
CN Pinouts:
Figure 3-19: Keyboard/Mouse Connector Pinouts
PIN
DESCRIPTION
PIN
DESCRIPTION
1
2
3
4
5
6
L_KDAT
NC
7
L_MDAT
NC
8
GND
5V
9
GND
5V
10
11
12
L_KCLK
NC
L_MCLK
NC
Table 3-20: Keyboard/Mouse Connector Pinouts
Page 66
®
IEI Technology, Corp.
Download from Www.Somanuals.com. All Manuals Search And Download.
KINO-LX Motherboard
3.3.2 Serial Port Connector
CN Label:
CN3
CN Type:
D-sub 9 male connector
CN Location:
CN Pinouts:
Figure 3-20: Serial Port Connector
Serial port connector (COM1) pinouts are shown below.
PIN
Description
PIN
Description
1
2
3
4
5
DCD1
6
7
8
9
DSR1
RTS1
CTS1
RI1
RXD1
TXD1
DTR1
GROUND
Table 3-21: Serial Port Connector Pinouts
Page 67
Download from Www.Somanuals.com. All Manuals Search And Download.
KINO-LX Motherboard
3.3.3 Parallel Port Connector
CN Label:
CN5
CN Type:
DB-25 female connector
CN Location:
CN Pinouts:
Figure 3-21 Parallel Port Connector Pinout Locations
PIN
DESCRIPTION
PIN
DESCRIPTION
1
STB#
PD0
PD1
PD2
PD3
PD4
PD5
PD6
PD7
ACK#
BUSY
PE
14
15
16
17
18
19
20
21
22
23
24
25
AFD#
ERR#
INIT#
SLIN#
GND
2
3
4
5
6
GND
7
GND
8
GND
9
GND
10
11
12
13
GND
GND
GND
SLCT
Table 3-22: Parallel Port Pinouts
Page 68
®
IEI Technology, Corp.
Download from Www.Somanuals.com. All Manuals Search And Download.
KINO-LX Motherboard
3.3.4 VGA connector
CN Label:
CN4
CN Type:
HD-D-sub 15 female connector
CN Location:
CN Pinouts:
A 15-pin VGA connector connects to standard displays.
Figure 3-22: VGA Connector
PIN
DESCRIPTION
PIN
DESCRIPTION
1
2
3
4
5
6
7
8
RED
9
NC
GREEN
BLUE
10
11
12
13
14
15
GROUND
NC
NC
DDCDAT
HSYNC
VSYNC
DDCCLK
GROUND
GROUND
GROUND
GROUND
Table 3-23: VGA Connector Pinouts
Page 69
Download from Www.Somanuals.com. All Manuals Search And Download.
KINO-LX Motherboard
3.3.5 LAN Connectors
CN Label:
CN6 and CN7
RJ-45
CN Type:
CN Location:
CN Pinouts:
See Table 3-24
PIN
DESCRIPTION
PIN
DESCRIPTION
1
+2.5VCC
TX0-
2
TX0+
TX1+
3
4
5
TX1-
6
TX2+
7
TX2-
8
TX3+
9
TX3-
10
12
14
GND
11
13
LINK-
ACTIVE-
LINK+
ACTIVE+
Table 3-24: LAN Pinouts
Figure 3-23: RJ-45Ethernet Connector
The RJ-45 Ethernet connector has two status LEDs, one green and one yellow
(Figure 3-23). The green LED indicates activity on the port and the yellow LED
Page 70
®
IEI Technology, Corp.
Download from Www.Somanuals.com. All Manuals Search And Download.
KINO-LX Motherboard
STATUS
GREEN
DESCRIPTION
Activity
STATUS
YELLOW
DESCRIPTION
Linked
Table 3-25: RJ-45 Ethernet Connector LEDs
3.3.6 USB Connectors
CN Label:
CN6 and CN7
CN Type:
USB port
CN Location:
CN Pinouts:
See Table 3-26
PIN DESCRIPTION PIN DESCRIPTION
1
3
5
7
USBV3L 5V
USBP4N
USBP4P
GND
2
4
6
8
GND
USBP5P
USBP5N
USBV3L 5V
Table 3-26: USB Port Pinouts
Page 71
Download from Www.Somanuals.com. All Manuals Search And Download.
KINO-LX Motherboard
3.3.7 Audio Connector
CN Label:
CN1
CN Type:
2 x audio jacks
CN Location:
CN Pinouts:
See Figure 3-18 (labeled number 7)
See Figure 3-24
ꢀ
ꢀ
Line Out port (Lime): Connects to a headphone or a speaker. With
multi-channel configurations, this port can also connect to front speakers.
Microphone (Pink): Connects a microphone.
Figure 3-24: Audio Connector
Page 72
®
IEI Technology, Corp.
Download from Www.Somanuals.com. All Manuals Search And Download.
KINO-LX Motherboard
Chapter
4
4 Installation
Page 73
Download from Www.Somanuals.com. All Manuals Search And Download.
KINO-LX Motherboard
4.1 Anti-static Precautions
Electrostatic discharge (ESD) can cause serious damage to electronic components,
including the Motherboard. (Dry climates are especially susceptible to ESD.) It is therefore
critical that whenever the
M o t h e r b o a r d (or any other electrical component) is handled, the
following anti-static precautions are strictly adhered to.
ꢀ
ꢀ
Wear an anti-static wristband: - Wearing a simple anti-static wrist band can
help to prevent ESD from damaging the board.
Self-grounding: - Before handling the board touch any grounded conducting
material. During the time the board is handled, frequently touch any
conducting materials that are connected to the ground.
4.2 Installation Considerations
NOTE:
The following installation notices and installation considerations should be
read and understood before the motherboard is installed. All installation
notices pertaining to the installation of the Motherboard should be strictly
adhered to. Failing to adhere to these precautions may lead to severe
damage of the motherboard and injury to the person installing the
motherboard.
4.2.1 Installation Notices
Before and during the installation of the motherboard,
ꢀ
Read the user manual
o
The user manual provides a complete description of the
motherboard, installation instruct ions and conꢀguration options.
ꢀ
Wear an electrostatic discharge cuff (ESD)
Page 74
®
IEI Technology, Corp.
Download from Www.Somanuals.com. All Manuals Search And Download.
KINO-LX Motherboard
o Electronic components are easily damaged by ESD. Wearing an ESD cuff
removes ESD from the user’s body and help to prevent ESD damage.
ꢀ
Place the motherboard on an antistatic pad
o When the motherboard is installed and configured, place it on an
antistatic pad. This helps to prevent potential ESD damage.
Turn oꢀ all power to the motherboard
o When working with the motherboard, make sure that it is disconnected
from all power supplies and that no electricity is being fed into the system.
Before an d during the installation of the motherboard
ꢀ
ꢀ
ꢀ
remove any of the stickers on the PCB board. These stickers are required for
warranty validation.
use the product before all the cables and power connectors are properly
connected.
allow screws to come in contact with the PCB circuit, connector pins, or its
components.
4.3 Unpacking
NOTE:
If any of the items listed below are missing when the PCB is unpacked,
do not proceed with the installation and contact the reseller or vendor
motherboard was purchased from.
4.3.1 Unpacking Precautions
ꢀ
Users should ground themselves to remove any static charge before touching
Page 75
Download from Www.Somanuals.com. All Manuals Search And Download.
KINO-LX Motherboard
Do not place a PCB on top of an anti-static bag. Only the inside of the bag is safe from
static discharge.
4.3.2 Checklist
When PCB is unpacked please make sure the package contains the following items.
1 x Single Board Computer
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
1 x ATA66/100 Flat Cable
2 x SATA Cable
1 x SATA Power Cable
1 x Dual RS-232 Cable
1 x I/O Shielding
1 x Mini Jumper Pack
1 x Utility CD
1 x QIG
4.4 Motherboard Installation
WARNING!
Please note that the installation instructions described in this manual should
be carefully followed in order to av oid damage to the components
and injury to the user.
Page 76
®
IEI Technology, Corp.
Download from Www.Somanuals.com. All Manuals Search And Download.
KINO-LX Motherboard
WARNING!
When installing electronic components onto the PCB always take
anti-static precautions in order to prevent ESD damage to the PCB and
other electronic components like the CPU and DIMM modules
4.4.1 Preinstalled Components
ꢀ
CPU
4.4.2 Components to Install
ꢀ
ꢀ
DIMM modules
Peripheral devices
4.4.3 DIMM Module Installation
4.4.3.1 Purchasing the Memory Module
When purchasing DIMM modules, the following considerations should be taken into
account: to 1GB of 333MHz or 400MHz of DDR memory
ꢀ
ꢀ
ꢀ
The DIMM module can support a memory chip with a maximum size of 1GB
The DIMM module can have a of 333MHz or 400MHz
The DIMM can be either single-sided or dual-sided.
4.4.3.2 DIMM Module Installation
The motherboard has one DDR SDRAM DIMM socket. To install a DIMM
Step 1: Pull the two white handles on either side of the DIMM socket down.
Page 77
Download from Www.Somanuals.com. All Manuals Search And Download.
KINO-LX Motherboard
Step 2: Align the DIMM module with the DIMM socket making sure the matching pins
are correctly aligned.
Step 3: Insert the DIMM module slowly. Once it is correctly inserted, push down firmly.
The white handles on either side of the socket move back up and lock the
module into the socket. Step 0:
Figure 4-1: DIMM Module Installation
4.5 Peripheral Device Connection
Cables provided by IEI that connect peripheral devices to the board are listed in Table
Page 78
®
IEI Technology, Corp.
Download from Www.Somanuals.com. All Manuals Search And Download.
KINO-LX Motherboard
Quantity Type
1
1
2
1
1
mini jumper pack
ATA 66/100 HDD cable
SATA cables
SATA power cable
Dual RS-232 cables
Table 4-1: IEI Provided Cables
4.5.1 IDE Disk Drive Connectors (CN29 Primary, CN28 Secondary)
The cable used to connect the CPU card to an IDE HDD is a standard 40-pin ATA66/100
flat cable. Follow the instructions below to connect an IDE HDD to the CPU card.
Step 1: Find the ATA66/100 flat cable in the kit that came with the CPU card.
Step 2: Connect one end of the cable to the CN29 (Primary IDE) connector on the CPU
card. A keyed pin on the IDE connector prevents IT from being connected
incorrectly.
Step 3: Locate the red wire on the cable that corresponds to the pin 1 connector.
Step 4: Connect the cable to the HDD making sure that the pin 1 cable corresponds to
pin 1 on the connector.Step 0:
Figure 4-2: Connection of IDE1 Connector
Page 79
Download from Www.Somanuals.com. All Manuals Search And Download.
KINO-LX Motherboard
NOTE:
When two EIDE disk drives are connected together, back-end jumpers on
the drives must be used to configure one drive as a master and the other as
a slave.
4.5.2 COM3-COM6 RS-232 Serial Port Installation
The cable used to connect the motherboard to an RS-232 serial port is a 10-pin header to
male D-sub 9 connector. To connect an RS-232 serial port to the motherboard, follow the
instructions below.
Step 1: Find the RS-232 cable in the kit that came with the motherboard.
Step 2: Connect the 10-pin connector end of the cables to the COM3 to COM6 box
headers on the motherboard. Be sure to align the red wire on the connector to
pin 1 on the box header.
Step 3: Connect the other end of the cables to standard female D-sub 9 connectors.
Step 0:
4.5.3 COM2 RS-232/485 Serial Port Installation
To connect an RS-232/485 serial port to the motherboard, follow the instructions below.
Step 1: Connect the 14-pin connector end of an RS-422/485 serial port cable to the
CN10 connector on the motherboard.Step 0:
NOTE:
Be sure to configure the JP2 COM2 RS232/RS485 Select Jumper for either an
RS-232 or RS-485 connection. Refer to Section 4.5 for more information.
Page 80
®
IEI Technology, Corp.
Download from Www.Somanuals.com. All Manuals Search And Download.
KINO-LX Motherboard
4.5.4 LCD Backlight Installation
To connect an LCD backlight (inverter) to the motherboard, follow the instructions below.
Step 1: Connect the 5-pin connector end of the LCD backlight cable to the CN12 header
on the motherboard. A keyed pin on the connector prevents it from being
connected incorrectly.Step 0:
4.5.5 Power Connection
To connect the motherboard to a power supply, follow the instructions below.
Step 1: Connect a 20-pin AT/ATX power connector from a power supply to the CN19
power connector on the motherboard. A keyed pin on the connector prevents it
from being connected incorrectly.Step 0:
4.5.6 LVDS LCD Installation
To connect a LVDS LCD to the motherboard, follow the instructions below.
Step 1: Connect the 20-pin connector end of a TTL LCD cable to the CN13 miniature
crimping connector on the motherboard. A keyed pin on the connector prevents
it from being connected incorrectly.Step 0:
4.5.7 TTL LCD Installation
To connect a TTL LCD to the motherboard, follow the instructions below.
Step 1: Connect the 40-pin connector end of a TTL LCD cable to the CN11 miniature
crimping connector on the motherboard. A keyed pin on the connector prevents
it from being connected incorrectly.Step 0:
Page 81
Download from Www.Somanuals.com. All Manuals Search And Download.
KINO-LX Motherboard
4.6 Jumper Settings
NOTE:
A jumper is a metal bridge that is used to
close an electrical circuit. It consists of
two metal pins and a small metal clip
(often protected by a plastic cover) that
slides over the pins to connect them. To
CLOSE/SHORT a jumper means
connecting the pins of the jumper with
the plastic clip and to OPEN a jumper
means removing the plastic clip from a
jumper.
Jumper
Description
Label
JP4
JP3
JP2
JP1
JP5
JP6
Type
3-pin header
Clear CMOS
LCD voltage select
3-pin header
6-pin header
10-pin header
3-pin header
2-pin header
COM2 RS-232/422/485 select
COM1/2 RI and voltage select
LCD clock setup
AT/ATX power mode select
Table 4-2: Jumpers
Page 82
®
IEI Technology, Corp.
Download from Www.Somanuals.com. All Manuals Search And Download.
KINO-LX Motherboard
Figure 4-3: Jumper Locations
4.6.1 Clear CMOS Jumper
Jumper Label:
Jumper Type:
JP4
3-pin header
See Table 4-3
See Figure 4-3
Jumper Settings:
Jumper Location:
If the PCB
fails to boot due to improper BI OS settings, use this connector to clear the
ation. To do this, use the jumper cap to
CMOS data and reset the system BIOS inform
close pins 2 and 3 for a few seconds then reinstall the jumper clip back to pins 1 and 2.
If the “CMOS Settings Wrong” message is displayed during the boot up process, the fault
may be corrected by pressing the F1 to enter the CMOS Setup menu. Do one of the
following:
ꢀ
ꢀ
ꢀ
Enter the correct CMOS setting
Load Optimal Defaults
Load Failsafe Defaults.
After having done one of the above, save the changes and exit the CMOS Setup menu.
Page 83
Download from Www.Somanuals.com. All Manuals Search And Download.
KINO-LX Motherboard
Clear CMOS
DESCRIPTION
Short 1 - 2 (Default)
Short 2 - 3
Keep CMOS Setup
Clear CMOS Setup
Table 4-3: Clear CMOS Jumper Settings
4.6.2 LCD Voltage Select Jumper
WARNING:
Making the wrong setting on this jumper may cause irreparable damage to
both the motherboard and the LCD screen connected to the on-board
connector.
Jumper Label:
JP3
Jumper Type:
3-pin header
See Table 4-4
See Figure 4-3
Jumper Settings:
Jumper Location:
This jumper allows the user to set the voltage for the LCD panel. Before setting this jumper
please refer to the LCD panel user guide to determine the required voltage. After the
required voltage is known, make the necessary jumper setting in accordance with the
JP3
DESCRIPTION
Short 1-2 (Default)
Short 2-3
Panel Voltage select 3V
Panel Voltage select 5V
Table 4-4: LCD Voltage Setup Jumper Settings
Page 84
®
IEI Technology, Corp.
Download from Www.Somanuals.com. All Manuals Search And Download.
KINO-LX Motherboard
4.6.3 COM2 RS-232/422/485 Select
Jumper Label:
Jumper Type:
JP2
6-pin header
See Table 4-5
See Figure 4-3
Jumper Settings:
Jumper Location:
The RS-232/422/485 select jumper sets the communication protocol used by the second
serial communications port (COM2) as RS-232, RS-422 or RS-485.
JP2
DESCRIPTION
Short 1-2
Short 3-4
Short 5-6
RS-232
RS-422
RS-485
Table 4-5: COM2 RS-232/422/485 Select Settings
4.6.4 COM1/2 RI and Voltage Select Jumper
Jumper Label:
Jumper Type:
JP1
10-pin header
See Table 4-6
See Figure 4-3
Jumper Settings:
Jumper Location:
This jumper allows the user to set the voltage for pin 9 on COM1 or COM2. Pin 9 is
traditionally a ring line but this jumper can set pin 9 to supply 5V or 12V power to a serial
device connected to COM1 or COM2. Make the necessary jumper setting in accordance
Page 85
Download from Www.Somanuals.com. All Manuals Search And Download.
KINO-LX Motherboard
JP1
DESCRIPTION
1-3
3-5
7-9
2-4
4-6
8-10
COM1 RI Pin Use +12V
COM1 RI Pin Use +5V
COM1 RI Pin Use RI
COM2 RI Pin Use +12V
COM2 RI Pin Use +5V
COM2 RI Pin Use RI
Table 4-6: COM2 Voltage Setup Jumper Settings
4.6.5 LCD Clock Jumper
Jumper Label:
Jumper Type:
JP5
3-pin header
See Table 4-7
See Figure 4-3
Jumper Settings:
Jumper Location:
The LCD clock jumper sets the LCD panel shift clock.
JP5
Description
1-2
2-3
Inverted Output (Default)
Normal Output
Table 4-7: LCD Clock Jumper Settings
4.6.6 AT/ATX Power Mode Select Jumper
Jumper Label:
Jumper Type:
JP6
2-pin header
See Table 4-8
See Figure 4-3
Jumper Settings:
Jumper Location:
The AT/ATX power mode select jumper block controls the connection to a power supply.
Page 86
®
IEI Technology, Corp.
Download from Www.Somanuals.com. All Manuals Search And Download.
KINO-LX Motherboard
The AT/ATX power connector is used to connect a chassis power On/Off button using an
adapter cable and is configured through the JP6 jumper. The AT/ATX power connector
has two operational modes:
1. Using ATX power: AT/ATX power connects to an externally implemented power
switch, and the JP6 jumper should be left open.
2. Using AT power: The pins on JP6 are shorted by a jumper cap. JP6 should be
shorted by default as the AMD Southbridge is designed without the consideration
for a power button signal. The shorted JP6 provides a hardware feedback to
initiate the system. The power on/off function is then managed by the AT power
switch button.
JP6
Description
Short
Open
AT Mode (Default)
ATX Mode
Table 4-8: AT/ATX Power Mode Select Jumper Settings
4.7 Chassis Installation
After the DIMM modules have been installed and after the internal peripheral connectors
have been connected to the peripheral devic es and the jumpers have been conꢀgured,
To mount a board into a chassis, please refer to the chassis user guide that came with the
product.
4.8 Rear Panel Connectors
4.8.1 Keyboard and Mouse Connection
A PS/2 keyboard and a PS/2 mouse can be connected to the appropriate PS/2 connector
on the rear panel.
Page 87
Download from Www.Somanuals.com. All Manuals Search And Download.
KINO-LX Motherboard
4.8.2 Serial Connection
The external peripheral interface connector panel serial connector provides easy and
quick access to external serial devices.
4.8.3 Parallel Connector
The external parallel port connector connects to a printer. The parallel port interface can
be re-assigned to LPT2 or LPT3 through the BIOS configuration utility. The default
interrupt channel is IRQ7. Select ECP or EPP DMA mode using the BIOS configuration
utility.
4.8.4 LCD Panel Connection
The conventional CRT monitor connector is a 15-pin, female D-SUB connector. It can be
connected to an external monitor.
4.8.5 Ethernet Connection
The rear panel RJ-45 connectors can be connected to an external LAN and communicate
with data transfer rates up to 10Mbps and 100Mbps.
4.8.6 USB Connection
The rear panel USB connectors provide easier and quicker access to external USB
devices. The rear panel USB connector is a standard connector and can easily be
connected to other USB devices.
4.8.7 Audio Interface
AC’97 Audio signals are interfaced through two phone jack connections. The red phone
jack is for Mic In and green is for Speaker Out.
Page 88
®
IEI Technology, Corp.
Download from Www.Somanuals.com. All Manuals Search And Download.
Any advice or comments about our products and service, or anything we can
help you with please don’t hesitate to contact with us. We will do our best to support
your products, projects and business.
Address: Global American, Inc.
17 Hampshire Drive
Hudson, NH 03051
Telephone: Toll Free U.S. Only (800) 833-8999
(603) 886-3900
FAX:
Support: Technical Support at Global American
(603) 886-4545
Download from Www.Somanuals.com. All Manuals Search And Download.
|