INSTRUCTION MANUAL
Hammer Drill
• Melbourne • Perth • Auckland • Hong Kong • Shanghai
• Taipei • New York • Verona • London • Paris
GTX2450K
050531 ED6 JJ
Download from Www.Somanuals.com. All Manuals Search And Download.
Description of symbols
Dear Customer
The rating plate on your tool may show symbols. These
represent important information about the product or
instructions on its use.
If you require any help with your product, whether it
is a Warranty claim, spare part or user information,
please phone our Help Line for an immediate response.
Phone 1300 880 001 in Australia or 0800 445 721 in
New Zealand.
Wear hearing protection.
Wear eye protection.
Wear breathing protection.
Introduction
Double insulated
for additional protection.
Your new GMC power tool will more than satisfy your
expectations. It has been manufactured under stringent
GMC Quality Standards to meet superior performance
criteria.
Conforms to relevant standards for
electromagnetic compatibility.
You will find your new tool easy and safe to operate,
and, with proper care, it will give you many years of
dependable service.
CAUTION. Carefully read through this entire Instruction
Manual before using your new GMC Power Tool. Take
special care to heed the Cautions and Warnings.
Your GMC power tool has many features that will make
your job faster and easier. Safety, performance, and
dependability have been given top priority in the
development of this tool, making it easy to maintain
and operate.
Specifications
GTX1850K
Nominal
battery charge: 18V
GTX2450K
24V
Charger:
230-240V ~ 50Hz 230-240V ~ 50Hz
Batteries:
2 x 1.5Ah
2 x 1.5Ah
3-5 Hours
Charging time: 3-5 Hours
Drill no
load speed:
0-350, 0-1250min-1 0-350, 0-1250min-1
Torque settings: 20 Positions
Drill chuck
20 Positions
Environmental protection
Recycle unwanted materials instead of
disposing of them as waste. All tools, hoses
and packaging should be sorted, taken to
the local recycling centre and disposed of
in an environmentally safe way.
capacity:
13mm Keyless
13mm Keyless
Max drilling
capacity:
steel
wood
concrete
13mm
28mm
13mm
13mm
32mm
13mm
Hammer impact
frequency:
0-5600,
0-20,000 BPM
0-5600,
0-20,000 BPM
Weight:
2.1kg
2.4kg
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Personal safety
Safety instructions
• Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under the
influence of drugs, alcohol, or medication. A moment
of inattention while operating power tools may result in
serious personal injury.
WARNING. Read and understand all instructions. Failure
to follow all instructions listed below may result in
electric shock, fire and/or serious injury. The term
“power tool” in all of the warnings below refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
• Use safety equipment. Always wear eye protection.
Safety equipment such as a dust mask, non-skid
safety shoes, hard hat, or hearing protection used for
appropriate conditions will reduce personal injuries.
• Avoid accidental starting. Ensure the switch is in the
off-position before plugging in. Carrying power tools
with your finger on the switch or plugging in power
tools that have the switch on invites accidents.
• Remove any adjusting key or wrench before
turning the tool on. A wrench or a key that is left
attached to a rotating part of the power tool may
result in personal injury.
Save these instructions
Work area
• Keep work area clean and well lit. Cluttered and dark
areas invite accidents.
• Do not operate power tools in explosive
atmospheres, such as in the presence of flammable
liquids, gases, or dust. Power tools create sparks
which may ignite the dust or fumes.
• Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
Electrical safety
• Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodified plugs and
matching outlets will reduce risk of electric shock.
• Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
• Do not overreach. Keep proper footing and balance at
all times. This enables better control of the power tool
in unexpected situations.
• Dress properly. Do not wear loose clothing or jewellery.
Keep your hair, clothing and gloves away from moving
parts. Loose clothes, jewellery or long hair can be
caught in moving parts.
• If devices are provided for the connection of dust
extraction and collection facilities ensure that these
are connected and properly used. Use of these devices
can reduce dust-related hazards.
• Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
• Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away
from heat, oil, sharp edges or moving parts. Damaged or
entangled cords increase the risk of electric shock.
• When operating a power tool outdoors, use an
outdoor extension cord suitable for outdoor use. Use
of a cord suitable for outdoor use reduces the risk of
electric shock.
Power tool use and care
• Do not force the power tool. Use the correct power
tool for your application. The correct power tool will
do the job better and safer at the rate for which it
was designed.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
• Do not use the power tool if the switch does not
turn it on and off. Any power tool that cannot be
controlled with the switch is dangerous and must
be repaired.
• Disconnect the plug from the power source before
making any adjustments, changing accessories, or
storing power tools. Such preventive safety measures
reduce the risk of starting the power tool accidentally.
• Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the power
tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained
users.
Additional safety instructions for drills
Wear ear protectors with impact drills.
Exposure to noise can cause hearing loss.
Use auxiliary handles supplied with the tool.
Loss of control can cause personal injury.
• If possible, always use clamps or a vice to hold your work.
• Always switch off before you put the drill down.
• Ensure that the lighting is adequate.
• Do not put pressure on the drill, such that it slows the
motor down. Allow the drill bit to cut without pressure.
You will get better results and you will be taking better
care of your tool.
• Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any
other condition that may affect the power tool’s
operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools.
• Keep the area free of tripping hazards.
• Do not let anyone under 18 years operate this tool.
• Only use accessory bits in good condition.
• Before drilling, check that there is sufficient clearance
for the drill bit under the workpiece.
• Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
• Use the power tool, accessories and tool bits etc.,
in accordance with these instructions and in the
manner intended for the particular type of power
tool, taking into account the working conditions
and the work to be performed. Use of the power tool
for operations different from intended could result in a
hazardous situation.
• Do not touch the bit after operation. It will be very hot.
• Keep your hands away from under the workpiece.
• Never use your hands to remove sawdust, chips or
waste close by the bit.
• Rags, cloths, cord, string and the like should never be
left around the work area.
• Support the work properly.
• If you are interrupted when operating the drill,
complete the process and switch off before looking up.
Service
• Periodically check that all nuts, bolts and other fixings
are properly tightened.
• When using the drill, use safety equipment including
safety glasses or shield, ear defenders, and protective
clothing including safety gloves. Wear a dust mask if
the drilling operation creates dust.
• Have your power tool serviced by a qualified repair
personnel using only identical replacement parts.
This will ensure that the safety of the power tool
is maintained.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
If in doubt, do not plug in the tool. Using a power source
with a voltage less than the nameplate rating is harmful
to the motor.
The tool must be used only for its prescribed purpose.
Any use other than those mentioned in this Manual will
be considered a case of misuse. The user and not the
manufacturer shall be liable for any damage or injury
resulting from such cases of misuse.
To use this tool properly, you must observe the safety
regulations, the assembly instructions and the operating
instructions to be found in this Manual. All persons
who use and service the machine have to be acquainted
with this Manual and must be informed about its
potential hazards.
Children and frail people must not use this tool. Children
should be supervised at all times if they are in the area
in which the tool is being used. It is also imperative
that you observe the accident prevention regulations in
force in your area. The same applies for general rules of
occupational health and safety.
• WARNING. Do not allow any liquid to come into contact
with the charger. There is a danger of electric shock.
• To allow the battery pack to cool down after charging,
do not place it in a hot environment such as a metal
shed or open trailer left in the sun.
• The charger is not intended for any use other than
charging the exact type of rechargeable battery pack as
supplied with the charger.Any other use may result in
the risk of fire, electric shock or electrocution.
• The charger and battery packs supplied with it are
specifically designed to work together. Do not attempt
to charge the battery pack with any other charger than
the one supplied.
• Do not place any object on top of the charger as it
could cause overheating. Do not place the charger near
any heat source.
• Do not pull on the lead of the charger to disconnect it
from the power source.
• Make sure that the charger cable is positioned where
it will not be stepped on, tripped over or otherwise
subjected to damage or stress.
• Do not use an extension cord unless it is absolutely
necessary. The use of an improper extension cord could
cause the risk of fire, electric shock or electrocution.
• Do not use the charger if it has been subjected to a
heavy knock, dropped or otherwise damaged in any
way. Take the charger to an authorised service centre
for a check or repair.
• Do not disassemble the charger. Take it to an
authorised service centre when service or repair is
required. Incorrect re-assembly may result in the risk of
fire, electric shock or electrocution.
• To reduce the risk of an electric shock, unplug the
charger from the power supply before attempting to
clean it. Removing the battery alone does not reduce
the risk.
The manufacturer shall not be liable for any changes
made to the tool nor for any damage resulting from
such changes.
Even when the tool is used as prescribed it is not possible
to eliminate all residual risk factors. The following hazards
may arise in connection with the tool’s construction
and design:
• Damage to the lungs if an effective dust mask is not worn.
• Damage to hearing if effective ear defenders are not worn
Additional safety instructions for the charger
• Before using the charger, read all the instructions and
cautionary markings on the charger and battery pack as
well as the instructions on using the battery pack.
• Only charge your batteries indoors as the charger is
designed for indoor use only.
• DANGER. If the battery pack is cracked or damaged in
any other way, do not insert it in the charger. There is
a danger of electric shock or electrocution.
• Never attempt to connect two chargers together.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
• Do not store or use the tool and battery pack in
locations where the temperature may reach or exceed
104°F (40°C) such as alongside sheds or metal
structures in the summer.
• The charger is designed for use from a standard
household electrical supply (230–240 volts). Do not
attempt to connect the charger to a supply with a
different supply.
• If you wish to charge a second battery pack, unplug
the charger from the mains supply and leave it for at
least 15 minutes. After this time you can charge a
second battery pack.
Additional safety instructions for the
battery pack
• The battery pack for this tool has been shipped in a low
charge condition.You should charge the battery pack
fully before use.
• To ensure the longest battery life and best battery
performance, always charge the battery when the air
temperature is between 18–24°C. Do not charge the
battery pack when the temperature is below 0°C, or
above 40°C. This is important. Failure to observe
this safety rule could cause serious damage to the
battery pack.
• Do not incinerate the battery pack even if it is seriously
damaged or can no longer hold a charge. The battery
pack can explode in a fire.
• Never attempt to open the battery pack for any reason.
If the plastic housing of the battery pack breaks open
or cracks, immediately discontinue its use and do not
recharge it.
• The battery pack utilizes nickel-cadmium cells.
Cadmium is considered to be a toxic material. Use an
environmentally safe disposal unit at a municipal
waste disposal centre to dispose of a damaged or worn
out battery.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Know your product
This drill is mainly used for drilling
in wood or metal sheet and
screwdriving. Use the tool and
accessories only for
6
14
intended applications.
All other applications are
expressly ruled out.
1. Keyless chuck
2.Torque adjustment/hammer
selection collar
3. Trigger with variable speed control
4. Forward/reverse switch
5. Side handle
4
6. Side handle clamp knob
7. Battery pack release tabs
8. Rechargeable battery pack
9. Slim line adaptor
5
2
3
1
10. Charger
11. LED Lights
13 11 12
12. Battery indicator button
13. LED Light switch
14. 2 Speed gear selector
10
7
8
9
8
Download from Www.Somanuals.com. All Manuals Search And Download.
3.Plug in the charger and switch
on. The red LED indicator will
show power to the adaptor and
that charging is
Unpacking
Due to modern mass production techniques, it is unlikely
that your GMC Power Tool is faulty or that a part is
missing. If you find anything wrong, do not operate the
tool until the parts have been replaced or the fault has
been rectified. Failure to do so could result in serious
personal injury.
taking place.
4.The battery charging time is
approximately 3–5 hours. The
red LED goes out when the
charging cycle is complete.
Turn off the charger power supply from the mains and
then remove the battery from the line adaptor.
Fitting and removing the battery pack
To remove the battery pack from the drill firmly press the
battery release tabs (7) at either side of the battery pack,
and slide the battery backward out of the tool.
To obtain the best life for the battery
Never allow the drill to come to a complete stand still
before recharging. The battery should be placed on charge
whenever the battery is noticeably running down or the
drill no longer performs a task it previously performed.
Avoid conducting short charges. Make sure that the battery
is fully charged every time by allowing the charger to
complete its full charging cycle.
Avoid allowing lose items like screws or nails etc to be
stored with battery packs as these or similar items can
short battery packs and cause a fire or explosion.
Always unplug the charger when not in use and store in a
dry secure place.
To install the battery pack, align rails, on the tool with
the tabs on the battery pack and slide the battery pack on
to the drill. Ensure the battery
pack is sitting straight on the
foot and correctly entering the
runners. The battery should
slide fully on to the drill foot
until the battery pack “clicks”
into position.
Battery charging
Important. Before plugging in the power supply from the
charger to the slim line adaptor always ensure that the
plug is switched off at the mains.
Important. The battery will be fully charged after 3-5
hours, remove it from the charger after this time. Do not
leave a battery charging for longer than 24 hours.
Avoid charging or storing your battery in temperatures
below 0ºC and above 40ºC.
Battery indicator
To activate the battery indicator feature first pull the
trigger switch (3) then press the battery indicator button
(12), this will display the level
of charge remaining in the
1.Align and slide the slim line
adaptor (9) onto the battery
until the battery pack latches
“click” into position. Check
the adaptor is flush with the
battery and there is a firm
connection.
2.Connect the power supply
from the charger to the slim
line adaptor via the socket in
the rear of the adaptor housing.
battery. There are 3 levels of
charge low, medium and high.
When the battery indicator is
showing only 1 LED (low) the
battery should be removed and
put on the charger.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
LED Work area light
Drilling positions
The drill has 3 LED lights (11)
to illuminate the work area and
improve vision when drilling in
areas with insufficient light.
To turn the LED lights on and
off depress the LED light switch
(13).
This symbol indicates the DRILLING MODE. Used for
all normal drilling (Wood, Aluminium, and Steel) in
this mode the clutch is deactivated.
This symbol indicates the HAMMER MODE. This mode
will activate hammer action, whilst drilling. For best
results in hammer mode, set the gear selector to
high gear.
Using the drill
Torque adjustment/hammer selection collar
By rotating the torque adjustment/hammer selection collar
(2) behind the chuck, it is possible to adjust the torque to
each of nineteen settings, or select hammer action or the
drill setting.
The range of nineteen torque settings allows better control
when using the drill as a screwdriver as it prevents over-
tightening of the screws.
The symbols circling the collar are used to indicate the
level of torque. The larger the symbol on the collar, the
higher torque and the larger the fastener which can be
driven. To select any of the symbols, rotate the collar
(2) until the desired symbol aligns with the arrow head
indicator on the housing.
Use the forward/reverse switch (4) to select the direction
of rotation, then pull the trigger (3). This trigger switch is
an electronic variable speed control which enables the user
to vary the speed continuously. The speed varies according
to how far the trigger switch is depressed, the further it is
depressed the faster the chuck will rotate and the lighter it
is depressed, the slower it will rotate.
To stop the drill, release the trigger switch.
2 Speed gearbox
The 2 Speed Gearbox allows
you to select a gear with the
optimum speed and torque to
suit the application.
Note. When changing the gear
selector ensure the drill is not
operating.
Note. You can only change the direction of rotation of the
drill using the forward/reverse switch when the trigger is
NOT depressed.
Forward/reverse switch
This switch (4) will allow you
to change the direction of
the motor while the trigger
switch is not depressed.
Drilling uses the forward mode.
The reverse mode is intended for
the removal of screws.
1.To select the LOW gear (low speed, high torque setting),
push the gear selector (9) forward, towards the chuck.
The word LOW will be displayed.
2. To select the HIGH gear (high speed, low torque
setting), push the gear selector (9) back, away from the
chuck. The word HIGH will be displayed.
Download from Www.Somanuals.co1m0. All Manuals Search And Download.
application and tighten the side handle clamp knob (6)
to secure it in place.
Inserting and removing bits
The drill is fitted with auto spindle lock which means if you
try and rotate the chuck by hand the spindle of the drill
will automatically lock. This means you only need to grasp
the chuck and rotate the chuck housing to remove or fit
accessories.
This drill has a keyless chuck, hence a chuck key is not
needed to secure a bit in the drill. Always set the forward/
reverse switch (4) to the locked ‘OFF’ position when
installing and removing bits. It is also recommended to
remove the battery pack to avoid unintentional starting.
1. Open the chuck jaws by firmly holding the chuck
housing and rotating the
housing in an anti-clockwise
direction. Open the jaws
sufficiently so as to fit the
desired accessory.
Drilling
Drilling metals
• For maximum performance, use high speed steel bits for
metal or steel drilling.
• Ensure that the torque adjustment / hammer selection
collar (2) is in normal drilling mode.
• Begin drilling at a very low speed to prevent the bit from
slipping off the starting point.
• Always clamp sheet metal.
• Support thin metal with a block of wood to avoid
distorting it.
• Use a punch to mark the centre of the hole.
• Use a suitable lubricant for the material you are working on.
2. Ensure the accessory is fully
inserted, so that the jaws of
the chuck grip onto the flat
section of the accessory.
Use:
for:
Oil
Steel
Turpentine or paraffin
Do not lubricate
Aluminium
Brass, copper or cast iron
3. To firmly clamp the accessory in the chuck, grasp
the chuck housing and rotate the chuck housing in a
clockwise direction. Ensure the bit is retained firmly or
damage to the chuck jaws can result.
Drilling plastics and plastic coated chipboard
• Use high speed drill bits
• See drilling wood below
4. To remove the accessory, open the chuck jaws by firmly
holding the chuck housing and rotating the housing in
an anti clockwise direction. Open the jaws sufficiently so
as to remove the specific accessory.
Drilling masonry
• For maximum performance use carbide-tipped masonry
impact bits when drilling holes in brick, tile, concrete etc.
• Turn the mode selector to hammer mode, then rotate the
torque collar to the drill position.
• Apply light pressure and medium speed for best results
in brick.
• Apply additional pressure and high speed for hard
materials such as concrete.
• When drilling holes in tile, practice on a scrap piece to
determine the best speed and pressure.
Adjustable side handle
1.Turn the side handle clamp
knob (6) anti-clockwise
to loosen the collar fully and
slip it over the chuck (1) onto
the drill.
2.Adjust the position of the side
handle (5) to suit the
Download from Www.Somanuals.co1m1. All Manuals Search And Download.
Drilling wood
• For maximum performance, use high speed steel bits for
wood drilling.
Chuck installation
1. Screw the chuck on
by hand as far as
it will go and insert
screw (LH thread).
2. Tighten the chuck
around the shorter
end of hex key (not
supplied) strike the
longer end in the
clockwise direction with a
wooden mallet.
3. Remove the hex key and open the jaws fully. Tighten
the screw in the centre of the chuck firmly, with the hex
key in an anti-clockwise direction.
• Ensure that the mode selector is in normal drilling mode.
• Begin drilling at a very low speed to prevent the bit from
slipping off the starting point. Increase the speed as the
drill bites into the material.
• When drilling through holes, place a block of wood
behind the work piece to prevent ragged or splintered
edges on the back side of the hole.
• Warning. Never attempt to lock the trigger switch in the
on position, do not lock the trigger on jobs where your
hammer drill may need to be stopped suddenly.
All drilling operations
• Mark off the centre of the hole using a centre punch
or nail.
Maintenance
• Store the tools, instruction manual and where necessary
the accessories in the original packaging. In this way
you will always have all the information and parts ready
to hand.
Chuck replacement
Chuck removal
Always wear eye protection.
• Do not throw used batteries into fire or water. There is
a danger of explosion! Please hand in non-working or
used batteries, or tools with built-in batteries, to the
environmentally-safe disposal unit at a municipal waste-
disposal centre, or to your dealer.
Turn the torque adjustment collar/hammer selection collar
(2) to the “drill” position and low gear, on the gear
selector (14). Tighten the chuck around the shorter end
of a hex key (not supplied) of 5mm or greater size. Using
a wooden mallet or similar object, strike the longer end in
the clockwise direction. This will loosen the screw inside
the chuck.
1. Open chuck jaws fully.
2. Insert a 5mm hex key into front of chuck between jaws to
engage screw head. Remove screw by turning clockwise.
3. Place the hex key in chuck and
tighten. Using a wooden mallet
or similar object, strike key
sharply in the anti-clockwise
direction. This will loosen
the chuck so that it can be
unscrewed by hand.
Download from Www.Somanuals.co1m2. All Manuals Search And Download.
Download from Www.Somanuals.co1m3. All Manuals Search And Download.
Download from Www.Somanuals.co1m4. All Manuals Search And Download.
Download from Www.Somanuals.co1m5. All Manuals Search And Download.
Carefully read the entire Instruction Manual
before using this product.
With continuing product development changes may
have occurred which render the product received
slightly different to that shown in this instruction
manual. The manufacturer reserves the right to
Before returning this product for a
Warranty Claim or any other reason
Please Call 1300 880 001 (Australia)
or 0800 445 721 (New Zealand)
change specifications without notice. Note:
Specifications may differ from country to country.
When you make your call, please have
the following information at hand:
• GMC Product Type • GMC Product Code
A GMC Service Engineer will take your call and, in
most cases, will be able to solve your problem over
the phone.
The GMC 777 Helpline operates from 7am to
7pm, 7 days a week (EST). This allows you
to contact GMC directly with any queries and
technical questions you have regarding
our products.
You are welcome to use this phone-in service to
make suggestions or give comments about any
GMC product.
45–55 South Centre Road
Melbourne Airport
Victoria, Australia 3045
Tel: (03) 8346 1100 Fax: (03) 8346 1200
Save this Manual for future reference.
Download from Www.Somanuals.com. All Manuals Search And Download.
|