Global Machinery Company Blower PB26CC User Manual

Code: PB26CC  
Date: 080904  
Black  
Cyan  
Magenta  
Yellow  
Edition: 6  
Op: DCR  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Warning.  
Your new GMC power tool will more than satisfy  
your expectations. It has been manufactured under  
stringent GMC Quality Standards to meet superior  
performance criteria.  
Read these instructions for use carefully.  
Use at a distance of at least 15m from  
other people.  
You will find your new tool easy and safe to operate,  
and, with proper care, it will give you many years  
of dependable service.  
Blowers and blower vacuums.  
Rotating impeller blades can cause sever injury.  
CAUTION. Carefully read through this entire Instruction  
Manual before using your new GMC Power Tool. Take  
special care to heed the Cautions and Warnings.  
Your GMC power tool has many features that will make  
your job faster and easier. Safety, performance, and  
dependability have been given top priority in the  
development of this tool, making it easy to maintain  
and operate.  
Explosive material.  
Extremely hot surface. Do not touch a hot muffler,  
gear box or cylinder. You may get burned. These  
parts get extremely hot from operation and remain  
hot a short time after the unit is turned off.  
Environmental protection  
Recycle unwanted materials instead  
of disposing of them as waste. All tools,  
hoses and packaging should be sorted,  
taken to the local recycling centre and  
disposed of in an environmentally safe way.  
Specifications  
Engine:  
26cc, 2 stroke  
234km/h  
Max. airflow velocity:  
Max. air volume (wide nozzle): 0.18m3/s  
Max. engine speed:  
Fuel tank capacity:  
Fuel type:  
8000min-1  
Description of symbols  
The rating plate on your tool may show symbols.  
These represent important information about the product  
or instructions on its use.  
700ml  
Unleaded petrol and  
2 stroke machine oil  
Conforms to relevant standards for  
electromagnetic compatibility  
Fuel mixture:  
Unleaded petrol/oil: 30:1  
Equivalent spark plug:  
CHAMPION CJ8  
NGK BM6A  
Wear hearing protection.  
Wear eye protection.  
Wear breathing protection.  
Sound pressure value:  
Weight:  
85dBA  
5 kg  
Noise label rating 85dBA  
(taken at 7.5 meters) you must wear  
ear protection at all times.  
85  
Noise label rating 85dBA (taken at 7.5 meters) you must  
wear ear protection at all times.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
– Replace all fuel tanks and containers caps securely.  
Substitute faulty silencers.  
Before use, always inspect the machine and check  
that the screws are not worn or damaged.  
It is advisable to wear suitable eye protection when  
operating the blower.  
Maintenance and storage  
Safety rules for petrol blowers  
Training  
Read the instructions carefully. Get familiar with the  
controls and proper use of the equipment.  
Only use the blower for the purpose for which it was  
designed, i.e. blowing garden debris. Any other use  
can be hazardous, causing damage to the machine.  
Keep all nuts, bolts and screws tight to be sure the  
equipment is in safe working condition. Regular  
maintenance is essential for safety and performance.  
Never allow children or people unfamiliar with these  
instructions to use the blower. Local regulations may  
restrict the age of the operator.  
Never store the equipment with fuel in the tank inside  
a building where vapour may reach a flame or a  
spark or a source of extreme heat.  
Allow the engine to cool before storing in an  
enclosed space.  
To reduce the fire hazard, keep the engine, exhaust  
silencer, battery compartment (if applicable) and fuel  
storage area free of grass, leaves, or excessive grease.  
If the fuel tank has to be drained, this should be done  
outdoors and when the engine is cool.  
For reasons of safety, do not use the equipment with  
worn or damaged parts. Parts are to be replaced and  
not repaired. Parts that are not of the same quality can  
damage the equipment and be dangerous for your safety.  
Fuel goes off fairly quickly. If you find your blower  
does not start, 1st change the fuel in the tank with newly  
purchased fuel.  
Never use the blower:  
– When people, especially children, or pets are nearby.  
– If the operator has taken medicine or substances that  
can affect his ability to react and concentrate.  
Remember that the operator or user is responsible  
for accidents or hazards occurring to other people or  
their property.  
Do not use unit around people with long hair.  
Dress appropriately do not operate with loose  
clothing ensure there is a gap between the air  
intake and the operator.  
Preparation  
While blowing, always wear sturdy footwear and long  
trousers. Do not operate the equipment with bare feet  
or open sandals.  
WARNING: DANGER! Engine fuel is highly flammable:  
– Store fuel in containers specifically designed for  
this purpose.  
– Refuel using a funnel and outdoors only. Do not smoke  
while re-fuelling or whenever handling the fuel.  
Service  
Have your power tool serviced by a qualified repair  
personnel using only identical replacement parts. This  
will ensure that the safety of the power tool is maintained.  
– Add fuel before starting the engine. Never remove  
the cap of the fuel tank or add fuel while the engine is  
running or when the engine is hot.  
– If fuel is spilled, do not attempt to start the engine but  
move the machine away from the area of spillage and  
avoid creating any source of ignition until the fuel has  
evaporated and the vapour dispersed.  
Operation safety instructions  
WARNING. Stop the engine and unplug the spark plug  
before any repairs or maintenance operations.  
Check that all nuts, bolts and screws are well  
tightened before every use.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Do not run the engine in an enclosed and/or poorly  
ventilated area. The gas of the engine contains carbon  
monoxide, which is dangerous to your health.  
Work only when there is sufficient light.  
Do not use the blower when it is raining or when the  
grass is wet.  
Caution must be taken while blowing on slopes.  
Turn off the engine if you must leave the blower  
unattended.  
Additional safety rules for petrol blowers  
Do not operate in a hazardous location. Such areas  
include where there is a risk of explosion of petrol fumes,  
leaking gas or explosive dust.  
Do not operate in a confined area. Exhaust gases,  
smoke or fumes could reach dangerous concentrations.  
Protect your blower. This blower is NOT WEATHERPROOF  
and should not be exposed to direct sunlight, high ambient  
temperature and damp, wet or high humidity conditions.  
Never change the rated speed of the engine in any way.  
Do not smoke while refuelling. This is potentially  
dangerous as it may ignite the fuel and cause an explosion.  
Stop the engine and remove the spark plug cover in  
these cases:  
Take care not to spill fuel. When refuelling the blower  
ensure that the motor has been switched off. Prevent the  
spilling of fuel as this may also ignite with the hot motor.  
Never refuel whilst the engine running.  
- Before any maintenance, repairing or checking operations.  
- If you leave the blower unattended.  
- If the blower vibrates in an abnormal way, take the  
blower to an authorized service centre.  
- Check the bolts and nuts regularly. Bolts and nuts may  
vibrate loose over time.  
Be careful where you store the blower. Store the blower  
in a dry area away from flammable liquids.  
Keep your distance. The blower emits exhaust fumes.  
Ensure bystanders keep a safe distance.  
WARNING. Fuel is highly flammable.  
Ensure you use oil-mix fuel. Ensure that you mix 40 parts  
unleaded fuel to 1 part engine grade oil. If not, the engine  
will overheat and cause damage to your blower.  
Keep fuel in a jerry can specially made for  
this purpose.  
Fill the fuel tank with a funnel and outside. Do not  
Never fill fuel tank indoors. Never fill fuel tank when engine  
is running or hot. Do not smoke when filling fuel tank.  
smoke or use a mobile phone during this process.  
Fill with fuel and oil before starting the engine.  
Never open the cap of the fuel tank to add gasoline while  
the engine is running or still hot.  
Stop the engine before re-fuelling.  
Stop the engine and disconnect the spark plug wire:  
Do not start the engine if there is spilt fuel on the  
blower or in the area surrounding. Take the blower  
away from the zone where fuel has been split and  
avoid any contact from a hot source as long as the split  
gasoline is completely evaporated.  
– If the blower starts to vibrate abnormally (find and  
remove the cause of the vibration immediately).  
Reduce the throttle before turning off the engine and turn  
the fuel off when you have finished blowing.  
The user is responsible for the safety of other people,  
animals and objects in the working area. Keep children  
and domestic animals at a safe distance while the blower  
is in use.  
Tighten the fuel tank cap and jerry can cap tightly.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Unpacking  
Contents of carton  
Tube (2 pieces)  
Screws for tube assembly  
Fuel mixing bottle  
Due to modern mass production techniques, it is unlikely  
that your petrol blower is faulty or that a part is missing. If you  
find anything wrong, do not operate the tool until the parts  
have been replaced or the fault has been rectified. Failure  
to do so could result in serious personal injury.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Know your product  
1. Throttle trigger  
2. Rubber grip handle  
3. Motor  
16  
12  
4. Straight tube  
11  
5
4
13  
2
1
8
10  
15  
6
3
7
9
14  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Assembly  
Mixing the fuel  
IMPORTANT. Blower tube installation affects both  
blower balance and performance. Both tube and nozzle  
must be screwed together.  
ENGINE FUEL: MIX AT 30:1  
WARNING. Danger from rotating impeller! Stop the engine  
before installing or removing the blower tubes. Never  
perform any maintenance or assembly procedures on this  
machine while the engine is running.  
30:1  
IMPORTANT. Use good quality air cooled 2-stroke  
1. Place the blower upright on the ground or on a sturdy  
work surface.  
engine oil.  
This product is powered by a 2-stroke engine and requires  
pre-mixing fuel with 2-stroke oil.  
2. Push the nozzle tube (5) over the straight tube (4) lining  
up the locking pins.  
1. Use fresh unleaded petrol. You must use 100%  
synthetic oil specifically made for heavily stressed two-  
stroke engines.  
2. Mix the petrol and oil in an approved container. Never mix  
fuel directly in the blower fuel tank.  
WARNING. Never use any type of pre-mixed fuel/oil direct  
from fuel stations. This may include special blends intended  
for use in mopeds, motorcycles, etc.  
3. Mix the fuel thoroughly and also each time before fuelling.  
3. Rotate the nozzle tube clockwise locking it into place.  
4. Lock the tubes together using the 2 screws provided.  
4. Always pre-mix in small quantities. Never mix quantities  
larger than what will be used in a 30 day period.  
Note. Do not store petrol in plastic containers.  
Keep fuel out of the reach of children.  
Filling the fuel tank  
WARNING. Always shut off the engine before fuelling.  
Never add fuel to a machine with a running or hot engine.  
Move at least 3m (10ft) away from the re-fuelling site before  
starting engine. Do not smoke when re-fuelling or operating  
the blower.  
5. Push the assembled blower  
tube over the discharge port  
and rotate until locks in place  
and the screw hole can be seen.  
6. Rotate the tube to the desired  
position.  
WARNING. Do not use fuel that is more than 2-3 months  
old. Empty the tank during longer breaks and fill it up again  
as soon you wish to use the blower again.  
Note. It is normal for smoke to be emitted from a new  
engine during and after first use.  
7. Screw the tubes using the  
screws provided.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
1. Place the blower upright on the ground or on a sturdy  
bench and wipe any debris from around the fuel cap.  
Operation  
Choke control  
If the engine is cold you will need to use the choke control.  
Start position (choke closed).  
2. Unscrew the fuel tank cap (7) and pour the mixture into  
the tank using a funnel (not supplied).  
3. Be careful not to spill any mixture. If this happens, wipe  
the spill with a clean rag.  
Run position (choke open).  
4. Start the engine at least three metres away from the area  
where the fuel tank has been filled up in order to avoid  
any risk of fire.  
Starting the blower  
To start the engine, proceed as follows:  
1. Press the primer (9) 5 to 10 times or until there are no air  
bubbles are visible in the fuel discharge line.  
Danger of fire and burn injuries.  
Always use extreme care when handling fuel!  
Fuel is highly flammable.  
Move the sliding throttle lock  
to central position.  
Never attempt to fuel the blower if the fuel system  
components are damaged or are leaking.  
Note. This is not necessary if the  
engine is warm.  
Never attempt the refuel the engine while it is running or still  
warm, allow it to cool before fuelling.  
Never smoke or light any fires near the blower or fuels.  
Always transport and store fuels in an approved container.  
Never place flammable material close the engine muffler.  
2. If the engine is cold, move the  
choke (15) lever upwards  
closed.  
Note. Again this is not necessary  
if the engine is warm.  
Do not use petrol which contains ethanol or methanol as  
it may damage the fuel lines and other engine parts.  
Mix only enough fuel for your immediate needs. If fuel  
must be stored longer than 30 days, it should first be  
treated with a stabilizer or similar product.  
3. Place the blower on the  
ground, and hold the  
blower handle firmly with  
your left hand.  
4. Pull the recoil starter (6) until  
the engine sounds like  
it wants to run.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
5. Push the choke all the way  
down.  
Prior to use of the blower ensure you have read and  
understood this instruction manual.  
6. Pull the recoil starter rapidly  
until the engine starts.  
Ensure you are wearing suitable clothing and also safety  
equipment like safety glasses, ear protection and a mask  
if necessary.  
7. Allow the engine to run for 10  
seconds to let it warm up.  
Keep a gap between the air intake and clothing and body  
parts as this will reduce the performance and may result  
in injury.  
8. To increase the engine speed  
squeeze the throttle trigger (1).  
Maintenance  
WARNING. Before performing any maintenance on this  
blower, stop the engine and disconnect the spark plug wire.  
Stopping the blower  
Stop the engine by pressing the  
off button (12) and holding it for  
2 seconds.  
Checking the spark plug  
Check the spark plug every 10 - 15 hours of use.  
1. Remove the spark plug cover.  
Blowing  
Start the blower engine, as  
previously described. Hold the  
blower firmly about 10 - 20 cm  
2. Use a spark plug wrench to remove the spark plug,  
by turning it counter-clockwise.  
from the ground and move it in a sweeping motion from  
left to right, directing the debris to the desired location.  
Use low throttle settings when clearing lightweight  
materials from around lawns or shrubbery.  
Use medium to higher throttle settings to move  
lightweight grass or leaves from driveways or paths.  
Use full throttle when moving heavy loads such as dirt or snow.  
IMPORTANT. Blower noise increases at higher throttle  
settings. Always use the lowest throttle setting required to  
get the job done.  
3. Clean and adjust the spark plug  
gap to 0.6 - 0.7mm. Replace  
any damaged or visibly worn  
plug with a CHAMPION CJ8,  
NGK BM6A or equivalent spark plug.  
Never operate the blower unless it is properly assembled  
and in good working condition.  
Never operate the blower without a properly functioning  
muffler and spark arrestor installed.  
4. Install the spark plug finger tight in the cylinder head,  
then tighten it firmly with the spark plug wrench.  
Use of the petrol blower  
The GMC petrol blower can efficiently move a wide  
variety of debris ranging from grass clippings to gravel.  
As a general rule try to operate the blower at the lowers  
throttle setting necessary to get the job done.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Give the petrol blower an overall cleaning and a  
thorough check.  
Air filter  
The air filter should be checked approximately every  
10 hours of use, or more frequently in dusty areas.  
Empty the fuel tank completely, then clean the  
carburettor and lines by running the blower until it  
stops from lack of fuel.  
1. Unclip the filter cover on  
the side, hinge around and  
remove the cover and  
filter element.  
Protect all metal engine parts from corrosion by coating  
them with oil.  
Remove the spark plug, put several drops of oil into the  
cylinder through the spark plug hole and then pull the  
recoil starter 2 to 3 times in order to distribute the oil  
evenly. Replace the spark plug and spark plug cover.  
2. Inspect the element. If  
the element is distorted or  
damaged, replace it with a  
new one.  
Clean the air filter as described in the air filter section.  
3. Wash the filter in detergent  
and water. Rinse the filter  
thoroughly. Squeeze out  
excess water. Allow it to dry  
completely before reinstalling.  
Problems  
Power loss or sudden stopping of the engine  
Check whether the fuel tank is empty.  
There is water in the mixture. Drain and rinse the fuel  
system with petrol.  
4. Install the element and cover  
and then replace the cover  
and clip into place.  
The air filter is dirty. Clean the air filter.  
Servicing  
Starting a flooded engine  
It is recommended once you first use your petrol blower  
have it serviced after 15 hours of use.  
Disconnect the spark plug lead, and use the plug wrench  
to remove the spark plug in a counter clockwise direction.  
From thereafter, service the petrol blower every 2 years.  
If the spark plug is fouled or is soaked with fuel, clean or  
replace the plug as required.  
Storage and maintenance after use  
When you finish working, clean the petrol blower completely.  
Inspect the entire blower and tubes for damage,  
including loose or missing components, and repair  
anything necessary.  
Clean excess fuel from the combustion chamber by  
cranking the engine several times while the spark plug  
is removed.  
Install the spark plug and firmly tighten it with the spark  
plug wrench.  
Store the petrol blower away from direct sunlight.  
Repeat the starting procedure as if the blower was  
already warm.  
Do not store in a nylon bag as this can encourage the  
formation of mould.  
Use a small brush to clean off the outside of the unit  
and keep the air vents free from obstructions. Do not  
use water or a hose to clean the unit.  
Whenever the machine is not used for a long period of time,  
proceed as follows:  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adjusting the engine idle speed  
If your blower is delivering poor performance or  
running roughly then you may need to adjust the  
engine idle speed.  
Start the blower engine.  
Run the engine at idle speed  
until operating temperature is  
reached, approximately 2–3  
minutes.  
Use a screwdriver to adjust  
the engine idle speed.  
Turn the idle screw clockwise  
to increase engine idle speed.  
Turn the idle screw counter  
clockwise to decrease engine idle speed.  
IMPORTANT. Blower tubes and intake cover must be  
installed while adjusting engine idle speed. Engine idle  
speed will also be affected if either the intake cover or  
blower tubes are blocked, damaged or incorrectly installed.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GMC customer assist  
If your product needs repairing or you simply need help  
or advice, please contact us on our Customer Assist Line  
1300 880 001 (Australia) or 0800 445 721 (New Zealand).  
For prompt service we suggest you log your service request  
online at www.gmcservice.com.au Should you not have  
access to the Internet, please contact our service department  
on 1300 880 001 (Australia) or 0800 445 721 (New Zealand).  
7am 7pm, 7days a week (AEST).  
Please note that if repair is required, you must  
provide a valid original purchase receipt.  
You will need the following details at hand to log your service request;  
Personal details: First & Last name, address, pick up address,  
contact phone numbers, email address  
Product details: Product number, date of purchase, retailer bought from,  
State & postcode, receipt number, reason for the request,  
copy of official purchase receipt  
Attach your purchase receipt and save with this Manual for future reference.  
Please refer to our website www.gmcompany.com for full GMC warranty Terms and Conditions.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Electro Voice Microphone 637 User Manual
Electro Voice Microphone 1777 User Manual
Exmark Lawn Mower COMMERCIAL 21 User Manual
Food Quality Sensor Microwave Oven R 320H User Manual
Frymaster Toaster HLZ User Manual
FUNAI CRT Television CR320IL8 A User Manual
Geemarc Telephone 100VM User Manual
Gefen Switch EXT HDMI13 841 User Manual
Gitzo Camcorder Accessories G2227 User Manual
Gitzo Camcorder Accessories GT5531S User Manual