O WNER’S MANUAL
FOR TECHNICAL ASSISTANCE
CONTACT:
Merit Industries, Inc. Customer Service Department
USA and Canada call toll-free:
1-800-445-9353
Outside the USA and Canada call: (215) 639-4700
FAX: (215) 639-5346
2525 State Rd., P.O. Box 5004, Bensalem, PA 19020-8529
merit industries, inc.
PM0070-0C
Download from Www.Somanuals.com. All Manuals Search And Download.
COPYRIGHT 1996 MERIT INDUSTRIES, INC.
•
•
Once the second circle is touched, a crosshair will
Monitor Colors Adjustment
Procedure
appear on the screen. To test the calibration of the
screen, touch the crosshair with your finger and
slowly drag your finger around the screen. The
crosshair should follow your movement.
For adjusting the colors on any of our monitor types, we
suggest following the procedures described below.
Touch the “EXIT TEST” icon.
For all monitor types, the visual cues used to adjust the
monitors are white cards and gray boxes (e.g. the
speed bonus box); you will adjust the monitor controls
until the cards are white and the boxes are gray.
Degaussing your Monitor
If your monitor is displaying “purity problems,” (a
display with purity problems will have parts of an all-
white screen affected by blotches of color) the monitor
needs to be degaussed using a “degaussing coil.” A
degaussing coil is a circular electromagnet, used to
cancel out any stray magnetic fields that may build up
on a metal object.
Ducksan Monitors
1. Set the game to the Run 21 hi-score screen.
2. Reduce the brightness from the monitor control
panel and adjust the RGB CUTOFF controls (as
needed) until the background is black.
3. Enter the Run 21 game screen. Reduce the
brightness and adjust the RB DRIVE controls until
the speed bonus box is light gray and the cards are
white (there is no Green DRIVE control, so adjust
the Green CUTOFF control if there is too much, or
too little, green).
All of our monitors have built-in degaussing coils that
are automatically activated on power-up. If your game
is experiencing minor purity problems, try powering
down the game for 5 minutes and then reapplying
power to activate the degaussing coil. If the problem is
not corrected, you will have to use a manual
degaussing coil.
Wells-Gardner and Telco Monitors
1. Set the game to the Run 21 hi-score screen.
Follow the instructions below for degaussing a monitor.
1. Plug in your degaussing coil.
2. Reduce the brightness from the monitor control
panel and adjust the RGB CUTOFF controls (as
needed) until the background is black.
2. Hold the coil about three feet from the monitor,
press the trigger to activate the magnetic field (for
circular-shaped coils, orient the coil so you see the
monitor through the hole in the middle; for wand-
shaped coils, point the wand towards the screen).
3. Enter the Run 21 game screen and adjust the RGB
DRIVE controls until the playing cards are white
and the speed bonus box is gray.
To adjust vertical and horizontal control:
3. Move the coil in a circular motion around the face
of the monitor and slowly approach the game.
•
Press “TEST SCREEN” on the “Megatouch Setup”
screen.
4. Continuing to move the coil in a circular motion,
slowly back away from the monitor.
•
A crosshair will appear on the screen. Change the
DIP switch settings until the horizontal and vertical
lines of the crosshair meet in the middle.
5a. CIRCULAR-SHAPED COILS: When you are about
three feet away, quickly turn the coil perpendicular
to the monitor and release the trigger.
5b. WAND-SHAPED COILS: When you are about
three feet away, point the wand away from the
monitor and release the trigger.
2
MEGATOUCH SUPER IV MANUAL
PM0070-0C
Download from Www.Somanuals.com. All Manuals Search And Download.
COPYRIGHT 1996 MERIT INDUSTRIES, INC.
Maintenance
Troubleshooting
Cleaning the Cabinet
Security Key Error Messages
•
The cabinet should be cleaned with a damp cloth
and mild detergent.
“KEY NOT VALID” message means the security key
is missing
“KEY QUESTION SET ERROR” message means the
security key does not match the
chip set.
Cleaning the Touchscreen Monitor
•
The touchscreen monitor should be cleaned with a
damp cloth and mild detergent.
Coin Jam
To gain access to the entire surface of the monitor
screen on the upright model, you will have to release the
monitor door latches. To do so, open the coin mech
door. Located inside, above and to the right and left of
the coin mech, are two monitor door latches. Unsnap the
monitor door latches and lift the door upwards. See
Figure 9.
The game also has coin jam and stringing detection
software. Should a coin become jammed in the mech
or someone tries to string the mech, a continuous tone
will be emitted by the game.
If the game emits the coin jam indicator sound when
powered up, this may indicate that the NORMALLY
CLOSED contacts of the coin mechanism are being
used. The NORMALLY OPEN contacts must be used.
To gain access to the entire surface of the monitor
screen on the cabaret model, you will have to release
the monitor door latches. To do so, open the coin mech
door. Located inside, above and to the right and left of
the coin mech, are two monitor door slide-latches.
Loosen the thumb nuts securing the latch and slide the
latch open. Pull up on the bottom of the bezel to
remove it (NOTE: TO FULLY REMOVE THE BEZEL,
YOU MUST DISCONNECT THE GROUND BRAID).
See Figure 6.
To gain access to the entire surface of the monitor
screen on the countertop model, you will have to
remove the top of the machine. To remove the top of
the machine, unlock and open the rear door. Locate the
thumb nuts holding the lock brackets on each side of
the monitor shelf. Unscrew and remove the thumb nuts
and push the top forward. Pull upwards on the top to
remove it from the machine. See Figure 5 for lock
bracket locations.
NOTE: DO NOT USE ANY ABRASIVE SOLVENTS, ACID OR
VINEGAR-BASED CLEANSERS ON THE MONITOR OR
SIDE DECALS. SUCH CLEANSERS COULD HARM THE
TOUCHSCREEN AND ERASE THE DECALS OVER
TIME. BE CAREFUL NOT TO USE COMMERCIAL
CLEANERS CONTAINING ANY OF THESE
SUBSTANCES.
PM0070-0C
MEGATOUCH SUPER IV MANUAL
3
Download from Www.Somanuals.com. All Manuals Search And Download.
COPYRIGHT 1996 MERIT INDUSTRIES, INC.
DIP Switch Settings
Custom Program Versions
Standard Program Settings
Some of the options or features in the standard game
may not be offered in certain jurisdictions. Depending
upon the program version being used, the settings may
differ slightly.
The game contains one DIP switch. The DIP switch
comes factory set. It determines which size monitor is
being used, whether the machine displays “quarters” or
“credits” and controls video sync adjustment. These
settings should not need to be changed.
PROGRAM
VERSION
STANDARD
VERSION
MINNESOTA
VERSION
PROGRAM
DIFFERENCES
INCLUDES ALL OPTIONS
NO RESTRICTIONS
EXCLUDES CASINO
GAMES
PROGRAM #
9255-41-01
9255-41-02
DIP SWITCH
OFF
ON
19”
EXCLUDES POKER
DOUBLE-UP FEATURE &
NO FREE GAME IN
SOLITAIRE
13“
CALIFORNIA
VERSION
Position 1
Position 2
9255-41-06
Touchscreen Touchscreen
Quarters
Credits
NEW JERSEY
VERSION
INCLUDES 2-COIN LIMIT
WITH LOCKOUT COIL
SAME AS STANDARD
VERSION, WITHOUT
WORD/CASINO GAMES
SAME AS STANDARD
VERSION, WITHOUT
WORD GAMES
SAME AS STANDARD
VERSION, WITHOUT
WORD/CASINO GAMES
SAME AS STANDARD
VERSION, WITH NO FREE
CREDIT
SAME AS STANDARD
VERSION W/SPECIAL
QUESTION SET
SAME AS STANDARD
VERSION W/SPECIAL
QUESTION SET
9255-41-07
9255-41-50
Horizontal
Horizontal
Positions 5 & 6
‡
‡
BI-LINGUAL
ENG/GER
Adjustment
Vertical
Adjustment
Vertical
Positions 7 & 8
‡
‡
INTER-
NATIONAL
Adjustment
Adjustment
9255-41-57
9255-41-60
9255-41-62
9255-41-70
9255-41-72
‡This adjusts the vertical and horizontal alignment of the picture. It is
not an adjustment for touchscreen calibration.
BI-LINGUAL
ENG/FRE
NO FREE
CREDIT
AUSTRALIA
S. AFRICA
4
MEGATOUCH SUPER IV MANUAL
PM0070-0C
Download from Www.Somanuals.com. All Manuals Search And Download.
COPYRIGHT 1996 MERIT INDUSTRIES, INC.
To Enter This Screen, Press The “Setup” Button In The Coin Mech Section
MEGATOUCH SETUP
COIN-IN
MENU
GAME
MENU
DISPLAY
BOOKS
TEST
SCREEN
MORE
OPTIONS
CLEAR
HI-SCORES
DEFAULT
YES
YES
ON
2
NO
NO
SOLITAIRE BUY-IN
FREE
CREDIT
SEX TOPICS IN WORD GAMES
OFF BONUS GAME IN SOLITAIRE
3
ROUNDS IN TRIVIA TWISTER
BALLS IN BREAKIN BRICKS
SIX STARS ENABLED
3
3
4
NO
NO
NO
NO
NO
YES
YES
YES
YES
YES
CLEAR
CREDIT
PLAYER SELECTABLE LANGUAGE
LANGUAGE ENGLISH/OTHER
POWER SOL - SPLIT COLUMN
SHOW ANSWERS IN TRIVIA
TRIVIA ROUNDS/BONUS
EXIT
SETUP
5/1M
4/300k
9255-41-01 12-11-1996 12:00:00
Figure 1 - Megatouch Setup Screen
Setup Screen Functions*
More Options:
Displays second “page” of soft DIP switch settings (DIPs shown below dotted line are found on
page 2 by touching “More Options”).
Coin-In Menu:
Game Menu:
Display Books:
Enters the coin/credit setup screen.
Enters the game menu selection screen.
Enters the bookkeeping statistics screen. (“PC Dump” located on the Books screen. PC Dump
allows the books information to be downloadeed to a PC. Software for the PC is required for it
to operate. Contact Merit Customer Service for information.
Enters the touchscreen calibration test.
Clears all game high scores.
Adds credit without using coin switch. Free credits are listed separately in the books screen.
All credits on the machine are erased.
Test Screen:
Clear Hi- Scores:
Free Credit:
Clear Credit:
Exit Setup:
Return to the attract mode.
Six Stars Enabled
This feature allows the high scores (for all active games) to be cleared, without opening the game. When the game
is in attract mode and the screen is touched, the message “You’ve Got the Touch - Deposit Coins Now” will appear
on the screen; if the “six stars enabled” switch is set to “yes,” six stars will appear at the top of this screen. Touch
the stars in sequence to access the clear the high scores. To set the sequence in which the stars must be touched,
go to the “Clear Hi-Scores” screen and follow the instructions. (“Six Stars” will not clear any tournament
information.)
*To save any changes, you must exit the Setup Screen before turning off the power. If the power is turned off before
exiting this screen, the settings may be lost.
PM0070-0C
MEGATOUCH SUPER IV MANUAL
5
Download from Www.Somanuals.com. All Manuals Search And Download.
COPYRIGHT 1996 MERIT INDUSTRIES, INC.
To Enter This Screen, Press “Game Menu” In The Setup Screen
1 SOLITAIRE
3 TRIVIA WHIZ
5 TRI-TOWERS
7 MEM-O-REE
.25
.25
.25
.25
2 RUN 21
.25
.25
.25
4 MATCH’EM UP
6 FOURPLAY
8 MORE GAMES…
SOLITAIRE
HORSES
ROLL THE DICE
PHRAZE CRAZE
MATCH’EM UP
FOURPLAY
11-UP
RUN 21
ROYAL FLASH
TRIVIA TWISTER
MEM-O-REE
TRI-TOWERS
POWER SOLITAIRE
TRIVIA WHIZ
DRAW POKER
SUPER 7 STUD
QUIKMATCH
BREAKIN’ BRICKS
CONQUEST
CLEAR
ALL
CLEAR
1
FORMAT
MENU 1
EXIT
DEFAULT
Figure 2 - Game Menu Screen
The game list and prices are programmed using this screen. Up to 21 games may be made
available for the players to choose. The top of the screen shows the game positions available,
with the price for each game. The lower section shows all games included in the program.
Touching the icons on the bottom of the screen will clear the entire menu, clear a selected
menu item, format the Game Menu to eliminate blanks, display Game Menus 2 and 3, reset
the default game menu and pricing and exit the Game Menu screen.
To program the Game Menu, select the menu position you want the game to occupy, by
touching that position. Then touch the game name from the game list on the lower portion of
the screen. That game will now appear in the menu. To adjust the price, touch the price in the
game menu. Each touch will rotate the price from 25¢ (1CR), to 50¢ (2CR), to 75¢ (3CR), to
$1 (4CR) and back to 25¢ (1CR). Touch “EXIT” when done.
6
MEGATOUCH SUPER IV MANUAL
PM0070-0C
Download from Www.Somanuals.com. All Manuals Search And Download.
COPYRIGHT 1996 MERIT INDUSTRIES, INC.
To Enter This Screen, Press “Coin-In Menu” In The Setup Screen
COIN/CREDIT SETUP
METER
PULSES
COIN
INPUT
COINS
=
CREDITS
&
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1E
2E
3E
4E
1M
2M
DEFAULT
EXIT
Figure 3 - Coin-In Menu Screen
The coin/credit ratios of the game may be adjusted to meet any application. The CPU board supports up to six coin
inputs: two mechanical mech inputs (1M and 2M) and four electronic mech inputs (1E, 2E, 3E and 4E). (Electronic coin
mechs are typically used when more than one type of coin needs to be accepted. If you would like to convert your game
from a mechanical mech to an electronic mech, please contact your distributor or Merit Technical Support for wiring
details.)
The coin/credit ratios can be adjusted by touching the screen at the location you want to change. The meter pulse can
also be adjusted so that the coin meter can show the actual cash value of the coins in the cashbox, not just the total
number of coins .
Example: Let’s say that in the country of Atlantis the currency is called units. Atlantis, however, has a 1 unit coin, a 2
unit coin and a 5 unit coin. You decide that 1 credit on the game should cost 1 unit. However, to encourage more play
you want to give 6 credits for a 5 unit coin. The coin setup screen would be programmed as follows:
COIN
INPUT
1E
2E
3E
METER
PULSES
COINS
=
CREDITS
&
1
1
1
1
2
6
1
2
5
For every 1 unit coin, the game would give 1 credit and count 1 pulse on the mechanical coin counter. For every 2 unit
coin, the game would give 2 credits and count 2 pulses on the mechanical meter. For every 5 unit coin, the game would
give 6 credits and pulse the mechanical meter 5 times. The mechanical meter will now display the total number of
“units” in the cashbox, not total coins or credits. Press “DEFAULT” to return to the factory settings. Press “EXIT” to
return to the GAME SETUP menu.
PM0070-0C
MEGATOUCH SUPER IV MANUAL
7
Download from Www.Somanuals.com. All Manuals Search And Download.
COPYRIGHT 1996 MERIT INDUSTRIES, INC.
FIGURE 4 - 13” COUNTERTOP (FRONT VIEW)
FIGURE 5 - 13” COUNTERTOP (REAR VIEW)
8
MEGATOUCH SUPER IV MANUAL
PM0070-0C
Download from Www.Somanuals.com. All Manuals Search And Download.
COPYRIGHT 1996 MERIT INDUSTRIES, INC.
FIGURE 6 - 19” CABARET (FRONT VIEW)
FIGURE 7 - 19” CABARET (REAR VIEW)
PM0070-0C
MEGATOUCH SUPER IV MANUAL
9
Download from Www.Somanuals.com. All Manuals Search And Download.
COPYRIGHT 1996 MERIT INDUSTRIES, INC.
FIGURE 8 - 19” UPRIGHT (FRONT VIEW)
FIGURE 9 - 19” UPRIGHT (REAR VIEW)
10
MEGATOUCH SUPER IV MANUAL
PM0070-0C
Download from Www.Somanuals.com. All Manuals Search And Download.
COPYRIGHT 1996 MERIT INDUSTRIES, INC.
MEGATOUCH IV PARTS LISTS
COUNTERTOP
REF #
X
QUANTITY
PART NO.
EC2001
DESCRIPTION
1
1
2
1
1
2
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
POWER CORD, 120V
X
EC2002
POWER CORD, 240V
X
GL3000-XX
MW5165-01
MW5167-01
MW5151-01
MW5150-01
HW8018-01
HW8993-02
HW9001
DECAL, MEGATOUCH, (-01=RT;-02=LT)
MONITOR FILLER PLATE
LOCK BRACKET, REAR DOOR
MONITOR SUPPORT
1
2
3
4
MAIN CHASSIS
5
RUBBER ANTI-SKID PAD
LAZY SUSAN, 12” DIAMETER, 15 DEG STOPS
PLASTIC TUBING
6
7
8
SA5151-01
EC9359
TOUCHSCREEN/CRT ASSEMBLY
CRT, COLOR, 14” CGA, WITH FRAME
TOUCHSCREEN OVERLAY
LID, RETAINING BRACKET
LID, LOCK BRACKET, RIGHT
LID, LOCK BRACKET, LEFT
REAR DOOR
9
10
11
12
13
14
16
17
18
19
20
21
22
23
24
25
26
27
28
30
31, 32
33
34
35
36
EC9824
MW5155-01
MW5159-01
MW5159-02
MW5161-01
MW5164-01
HW8713
HINGE, REAR DOOR
FLAT LOCK #564 (REAR DOOR)
CABINET SIDE, RIGHT
WD5171-01
WD5171-02
EC9154
CABINET SIDE, LEFT
COUNTER, 12V, FROG EYE MOUNTING
AC POWER HARNESS
SA5123-01
SA5131-01
HW8953
MAIN HARNESS
BEZEL, 13” T/S
SA4084
4” SPEAKER ASSEMBLY
POWER SUPPLY, SW, 11 AMP
RETAINING BRACKET, COIN BOX
PCA, CPU, VID, 260 TESTED
SMT-3 TOUCHSCREEN CONTROLLER
CIRCULAR LOCK (COIN MECH)
CONNECTOR COIN BOX ASSEMBLY
COIN BOX ASSEMBLY
EC7526-02
MW5156-01
TA10004-02
EC9840
HW8741
SA5156-01
SA5153-01
HW8727
LOCK, COIN BOX
MW5153-01
HW4498
LID, COIN BOX
THUMB SCREWS, BRASS
POWER ENTRY (POWER ENTRY TYPE DETERMINED BY
LINE CORD REQUIREMENTS)
37
1
SA5152-XX
38
39
1
1
SB0004-02*
HW0001-01
ASSY, MOV/ARRESTOR (*240V GAMES ONLY)
SAFETY COVER, POWER SUPPLY
PM0070-0C
MEGATOUCH SUPER IV MANUAL
11
Download from Www.Somanuals.com. All Manuals Search And Download.
COPYRIGHT 1996 MERIT INDUSTRIES, INC.
19” CABARET
REF#
QUANTITY
PART NO.
DESCRIPTION
X
X
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
EC2001
EC2002
POWER CORD, 120V
POWER CORD, 240V
1
WD5060-01
MW1672-01
MW1673-01
MW1671-01
HW8951-01
SA3266-02
SA3263-01
SA3270-01
SA4084
WOOD CABINET, URTS, 19” CABARET
CONTROL PANEL, 19” CABARET
COVER SCREEN, 19” CABARET
BRKT, GLASS, UPPER, 19” CABARET
BEZEL, MONITOR, 19” CABARET
CRT ASSY, 19” CABARET
2
3
4
5
6
7
POWER ENTRY, URTS, 120V
POWER ENTRY, URTS, 240V
SPEAKER ASSY, 4”
7
8
9
SA3209-01
SA3281-01
TA10004-02
SA3282-01
EC7526-02
WD5052-01
SA3264-01
SB1523-02
EC6052-04
GL2401-03
GL2411-03
GL2999-01
MW1674-01
MW1674-02
HW8979
BRKT ASSY, METER/TEST SW
MAIN HARNESS, 19” CABARET
PCA, CPU, VID, 260
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
30
31
32
33
28
29
30
POWER HARNESS, 19” CABARET
POWER SUPPLY
PC SHELF, CABARET
SWITCH ASSY, URTS
FLUORESCENT LAMP ASSY, 120V, 22”
FLUOR, 15”, 120V-60Hz, W/10” CABLE
VINYL, MARQ, MEGATOUCH 19” CABARET
PLEXI, CLR, 19” CABARET SIGN
DECAL, MEGATOUCH, URTS, CABARET
MONITOR SUPPORT, LEFT, 19” CAB
MONITOR SUPPORT, RIGHT, 19” CAB
SLIDE LATCH, DART MATRIX SW
COVER, SPEAKER HOLE, 19” CABARET
MOUNTING POST, KNURLED
LAMP, FLUOR, 15: F15T8CW
HW1677-01
HW6366
LB2100
EC9840
SMT-3 TOUCHSCREEN CONTROL MODULE
SPEAKER, MTG BRKT, 19” CAB
CRT, COLR, 20”, CGA, DC COUPLED
OVRLY, T/S 19” W/58” CABLE
SHELF, MONITOR 19” CAB
MW1670-01
EC9374
EC9839
WD5061-01
MW0006-01*
SB0004-02*
HW0001-01
COVER, PCA (*240V GAMES ONLY)
ASSY, MOV/ARRESTOR (*240V GAMES ONLY)
SAFETY COVER, POWER SUPPLY
12
MEGATOUCH SUPER IV MANUAL
PM0070-0C
Download from Www.Somanuals.com. All Manuals Search And Download.
COPYRIGHT 1996 MERIT INDUSTRIES, INC.
19” UPRIGHT
REF#
QUANTITY
PART NO.
DESCRIPTION
X
X
1
1
1
1
4
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
EC2001
EC2002
POWER CORD, 120V
POWER CORD, 240V
1
HW8711
ANCHOR PLATE FOR CAM LOCK
FLAT LOCK, #564
2
HW8716
3
HW8960
LEG LEVELER
4
MW0044-01
SA3230-01
MW5006-01
SA0015-01
SA3216-01
EC7526-02
TA10004-02
SA3202-04
WD2014-01
SA3210-02
EC9374
DOOR LOCK PLATE, URTB
5
BEZEL ASSEMBLY
6
SPEAKER COVER
7
HARNESS, MAIN, UNIVERSAL, 19”CAB/URTS
AC POWER HARNESS
8
9
POWER SUPPLY
10
11
12
13
14
15
16
17
18
19
19
20
21
23
24
25
26
27
PCA, CPU, VID, 260
SHELF ASSEMBLY, TOUCHSCREEN/CRT, 120V
PCB MOUNTING SHELF
TOUCHSCREEN/CRT ASSEMBLY
CRT, COLOR, 19” CGA
EC9823
TOUCHSCREEN OVERLAY, 19”
CRT MOUNTING SHELF
WD2013-01
MW5003-01
MW5003-02
SA3206-01
SA3170-01
SA4084
CRT ADJUST, BRACKET, LEFT
CRT ADJUST, BRACKET, RIGHT
POWER ENTRY, UR 19”, T/S, 120V
POWER ENTRY, UR 19”, T/S, 240V
SPEAKER ASSEMBLY
WD2012-01
SA3209-01
EC9840
CABINET, 19” UPRIGHT TOUCHSCREEN
METER/TEST SWITCH BRACKET ASSEMBLY
SMT-3 TOUCHSCREEN CONTROL MODULE
COVER, PCA, 19” URTS/CAB (*240V GAMES ONLY)
ASSY, MOV/ARRESTOR (*240V GAMES ONLY)
SAFETY COVER, POWER SUPPLY
MW0006-01*
SB0004-02*
HW0001-01
PM0070-0C
MEGATOUCH SUPER IV MANUAL
13
Download from Www.Somanuals.com. All Manuals Search And Download.
COPYRIGHT 1996 MERIT INDUSTRIES, INC.
Merit Video
Limited Warranty
Merit Industries, Inc. warrants it’s video countertop and
upright machines to be free from defects in material
and workmanship for a period of six months from the
date of delivery or seven months from the date of
shipment from its facilities, whichever occurs first. The
warranty covers all electrical components (except fuses
and light bulbs) and printed circuit boards. Other items
are covered by warranty periods offered by the original
equipment manufacturers (power supplies - 90 days;
video monitors - 90 days).
In certain instances, due to geographical or other
considerations, Merit may offer PCB warranty service
on an extended time basis as follows:
(a) User notifies Merit in writing (or FAX) of PCB
failure, providing dates of failure, serial numbers
and a brief description of failure symptoms.
(b) Failed PCBs are accumulated for a time
period or quantity accumulation, as designated
by Merit and sent in one shipment to save
shipping expenses.
Failure due to misuse, vandalism, excessive or
intentional abuse, operation outside specified
conditions (including, but not limited to, improper
electrical power source), fire, water damage, acts of
God, acts of war and civil unrest are specifically
excluded.
(c) Merit honors warranty as per dates of failure
notification.
The above terms and conditions constitute the sole
obligation, written or implied, of Merit Industries under
its warranty coverage.
Merit products are carefully inspected and thoroughly
tested prior to packing and shipment. Any damage
discovered upon receipt of goods, whether obvious or
concealed, must be reported immediately to the
delivering carrier and claims made directly to them.
Merit assumes no responsibility for damages once the
product has left its facilities and any disputes regarding
transportation damage must be resolved with the
shipping company(s).
PROPRIETARY
Merit will repair or replace, at its option, any
THE INFORMATION CONTAINED HEREIN IS THE
EXCLUSIVE PROPERTY OF MERIT INDUSTRIES,
INCORPORATED AND SHALL NOT BE USED,
DISTRIBUTED OR REPRODUCED IN WHOLE, OR IN
PART, WITHOUT THE EXPRESS WRITTEN
PERMISSION OF MERIT INDUSTRIES,
component, part or assembly that fails under warranty,
provided that the failed item is returned, shipping
charges prepaid, to Merit’s repair facility and Merit is
notified of the failure within the warranty period. Merit
reserves the right to request the serial numbers of the
item and/or game which has failed , and copies of sales
invoices, bills of lading or other documents as required
to determine the validity of the warranty coverage. Merit
will return or replace warranty items, as specified
above, shipping charges prepaid, by ground
transportation.
INCORPORATED.
FCC WARNING
Merit’s obligation shall be limited to repair or
replacement as stated above, and shall specifically
exclude any liability for consequential damages or loss
of earnings.
THIS EQUIPMENT COMPLIES WITH THE
REQUIREMENTS IN PART 15 OF FCC RULES FOR
A CLASS “A” COMPUTING DEVICE. OPERATION IN
A RESIDENTIAL AREA MAY CAUSE
INTERFERENCE TO RADIO AND TV RECEPTION
REQUIRING THE OPERATOR TO TAKE WHATEVER
STEPS ARE NECESSARY TO CORRECT THE
INTERFERENCE.
Merit may, at its discretion, provide replacement parts
under warranty prior to receiving defective items
without incurring any ongoing obligation to extend such
accommodations.
14
MEGATOUCH SUPER IV MANUAL
PM0070-0C
Download from Www.Somanuals.com. All Manuals Search And Download.
|