Keyprox Plus
Access Control System
Features
Statement
The system is based on a controller
that supports two Secure Card readers
which can be mounted up to 50 meters
from the controller with a simple 3-wire
connection. The controller can be
configured to operate a single door or two
independent doors.
Controller supports two readers.
Controller can control 2 independent
doors or a single door.
Use RS-232 or RS-485 to connect a
single controller to a PC.
Up to 16 controllers can be connected
using a RS-485 network to a PC.
Up to 32 independent doors can be
controlled.
The controller has a RS-232
connection allowing single controller
systems a simple means of connecting to
a PC provided the cable run is less than
30 meters. The controller also has a RS-
485 connection that will support up to 16
controllers connected in a RS-485
network to a PC thus allowing the control
of up to 32 doors.
The system supports 2000 tags.
E a c h c o n t r o l l e r s t o r e s l a s t 2 0 0 0
transactions with date & time stamp in
non-volatile memory. All transactions -
including denied access, pushbutton and
alarm conditions are logged.
Optional Door Switch allows use of 4
t i m e r s t o s o l v e c o m p l e x l o c k i n g
problems.
In this configuration the PC will require
a 311 RS-232/485 Interface/Repeater to
Optional Exit Push Button for each door.
Access control is achieved by assigning a
user an Access Parameter.
There are 2 predefined and 8 user
defined Access Parameters. User defined
parameters consist of 5 time zones for
each day of week +holiday during which
Free Software !!
The software is required for all programming of the system,
downloading transaction sand printing
Reports.
655-20
656-20-1
Secure Mini Reader
Controller
311-30
657-20-1
RS-485 to RS-232
convertor
ANSI-sized Reader
GIANNI INDUSTRIES, INC.
No. 13, Zhong Sing Road, Tu-Cheng Industrial Zone,
Tu-Cheng City, Taipei, Taiwan 23678
The products are manufactured under an ISO
9001
&
QC 080000 Certified Quality
Management Program environment back its
product quality, performance and commitment
to customer satisfaction.
Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876
E-Mail: [email protected]
Website: gianni.tw
Copyright 2008 Gianni industries, inc. All rights reserved.
DM-CA-Keyprox Plus Ver. B Published on 2008.05.21
Download from Www.Somanuals.com. All Manuals Search And Download.
Keyprox Plus
Access Control System
RS-485 must be used where the distance between the controller
and the PC isgreater than 30 meters or for installations of
Multi-Controller System
m u l t i p l e c o n t r o l l e r s . T h e P C w i l l r e q u i r e
a
3 11
Interface/Repeater to interface the RS-232 from the PC to the
RS-485 of the controller network. The drawing below shows a
typical RS-485 installation.
311 RS-232/485
interface
Power supply
AC IN
N
12VDC 0.5A
-
L
+
3 core
2 core
2 core
P.B.
NO COM NC
Controller
Address 0
3 core
Alarm or trigger output
Door Sw 1
Door strike 1
Reader 0B
Reader 0A
Total Cable
Length
Maximum
of 16 Controllers
Max. 1000
meters
Exit 1
Power supply
AC IN
N
12VDC 0.5A
-
L
+
3 core
2 core
2 core
P.B.
NO COM NC
Controller
Address 15
3 core
Alarm or trigger output
Door Sw 1
Door strike 1
Reader 15 B
Reader 15 A
Warranty
Exit 1
The product is warranted against defects in material and
workmanship while used in normal service for a period of
1
year from the date of sale to the original customer. The GEM
policy is one of continual development and improvement;
therefore GEM reserves the right to change specifications
without notice.
Gianni supplies all accessories for access control application
including maglock, electric bolt lock, electric strike ,exit button,
power supply, prox cards or fobs.
GIANNI INDUSTRIES, INC.
No. 13, Zhong Sing Road, Tu-Cheng Industrial Zone,
Tu-Cheng City, Taipei, Taiwan 23678
The products are manufactured under an ISO
9001
&
QC 080000 Certified Quality
Management Program environment back its
product quality, performance and commitment
to customer satisfaction.
Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876
E-Mail: [email protected]
Website: gianni.tw
Copyright 2008 Gianni industries, inc. All rights reserved.
DM-CA-Keyprox Plus Ver. B Published on 2008.05.21
Download from Www.Somanuals.com. All Manuals Search And Download.
|