FPD1750 Monitor
User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Your FPD 1750 Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Connecting the monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Starting the monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Adjusting monitor settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
External controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
On-screen display options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Software controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Video modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Power management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
ENERGY STAR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Energy declaration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
No power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
No picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Display colors are wrong . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Picture has shadows or “ghosts” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Color is not uniform . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Image is not sized or centered correctly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
The monitor has pixels that are always dark or too bright . . . . . . . . . . . . . . . . . . . . . . 17
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Safety, Regulatory, and Legal Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
i
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the monitor
To connect the monitor:
1 Position your com puter an d th e m on itor so you can reach th e con n ection s on each .
2 Lay th e m on itor on its back, th en con n ect th e power cord to th e power con n ector
un der th e bottom of th e screen .
3 Con n ect th e video cable to th e blue video con n ector un der th e bottom of th e screen .
4 Return th e m on itor to its uprigh t position .
5 Make sure th at your com puter is turn ed off, th en con n ect th e oth er en d of th e video
cable to th e m atch in g blue video port on th e back of your com puter.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
6 Plug th e power cord in to a correctly groun ded electrical outlet.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Starting the monitor
To start the monitor:
1 Press th e power button on th e fron t of m on itor. Th e power LED on th e power button
turn s on .
Power button
2 Turn on your com puter.
3 After your com puter is run n in g, th e power LED on th e m on itor’s power button sh ould
be blue. Allow about 10 secon ds for th e display im age to appear. If th e power LED is
n ot blue or you do n ot see a display im age, ch eck th e con n ection s. For m ore
troublesh ootin g in form ation , see “Troublesh ootin g” on page 15.
4 Adjust th e tilt of th e m on itor for th e best viewin g an gle.
5 After you see th e Win dows desktop, press th e AUTO/SELECT button to autom atically
adjust your display im age to th e ideal settin gs.
6 Use th e on -screen display (OSD) to adjust oth er m on itor settin gs. For m ore
in form ation , see “Adjustin g m on itor settin gs” on page 5.
Important
When adjusting the monitor settings, always press the
AUTO/SELECT button before entering the OSD. This will
automatically adjust the display image to the ideal settings for the
current screen resolution.
The best screen resolution is 1280 × 1024.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting monitor settings
Use th e extern al con trols (located on th e m on itor itself) an d software con trols (accessible
in Win dows) to adjust th e display im age. For m ore in form ation about software con trols,
see “Software con trols” on page 9.
External controls
Th is m on itor features an on -screen display (OSD) th at lets you adjust an d save con trast,
brigh tn ess, an d oth er settin gs for th e m on itor. Th e m on itor saves ch an ges you m ake to
th e settin gs, even if you turn off th e m on itor.
LightView
button
Power button
and LED
AUTO/SELECT
button
Brightness
buttons
Contrast
buttons
MENU
button
5
Download from Www.Somanuals.com. All Manuals Search And Download.
■
Ligh tView
Press to access th e Ligh tView m en u an d select a preset viewin g m ode. Preset m odes
in clude optim ized settin gs for text, m ovies, or ph otos in eith er day or n igh t am bien t
ligh t levels.
■
■
MENU
Press to view th e OSD. Press again to exit.
(Con trast)
OSD active: Press to select OSD option s.
OSD in active: Press to adjust th e con trast.
■
■
(Brigh tn ess)
OSD active: Press to adjust OSD option s.
OSD in active: Press to adjust th e brigh tn ess.
AUTO/ SELECT
OSD active: Press to m ake a selection in th e OSD.
OSD in active: Press to autom atically optim ize th e m on itor’s im age position , clock,
an d ph ase.
■
Power
Press th is button to turn th e m on itor off an d on .
On-screen display options
Adjusting OSD settings
To adjust the OSD settings:
1 Press th e MENU button . Th e OSD m en u open s.
2 Use th e
3 Use th e
an d
button s to h igh ligh t a con trol, th en press th e AUTO/SELECT button .
button s to adjust th e con trol to th e desired level.
4 Press th e AUTO/SELECT button to return to th e n avigation bar on th e left of th e OSD.
5 Wh en you h ave fin ish ed m akin g all adjustm en ts, press th e MENU button to exit.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Locking the control buttons
You can lock th e fron t con trol button s to preven t th em from bein g used to ch an ge display
settin gs.
To lock the control buttons:
1 Press an d h old th e MENU an d
button s togeth er for five secon ds.
2 To un lock th e con trol button s, press an d h old th e MENU an d
button s togeth er for
five secon ds.
OSD menus
OSD Menu
PICTURE
Description
BRIGHTNESS. Adjusts the amount of light in the
darkest portion of the picture. Use the lowest
brightness setting you are comfortable with to
maximize the life of the monitor backlights.
BRIGHTNESS
You may need to readjust brightness after the monitor
has warmed up.
50
50
50
CONTRAST
GAMMA
CONTRAST. Adjusts the level of white between the
lightest and darkest portions of an image.
GAMMA. Customizes the gamma level. High gamma
levels increase white levels and low gamma levels
increase contrast.
MENU
PRESET. Adjusts the color temperature.
9300K is bluish white.
COLOR
6500K is reddish white (default).
PRESET
!
RED, GREEN, BLUE. Customizes the color levels.
9300K
6500K
Press th e
button to move to the next color.
RED
50
GREEN
BLUE
50
50
MENU
7
Download from Www.Somanuals.com. All Manuals Search And Download.
OSD Menu
POSITION
Description
HORIZONTAL. Moves the display image left and right.
VERTICAL. Moves the display image up and down.
You can also use the AUTO/SELECT button to
configure the vertical and horizontal position
automatically.
HORIZONTAL
50
50
VERTICAL
MENU
CLOCK. Minimizes any vertical bars or stripes visible
on the screen background. The horizontal screen size
will also change.
TRACKING
PHASE. Minimizes any horizontal distortion and
clears or sharpens the displayed characters.
CLOCK
PHASE
50
50
MENU
LANGUAGE. Changes the language of the OSD.
SETUP
OSD POSITION. Adjusts the OSD window position on
the screen.
LANGUAGE
ENGLISH
OSD POSITION
HORIZONTAL
WHITE BALANCE. Adjusts the color temperatures for
truer colors.
50
50
FACTORY RESET. Returns settings to the factory
defaults.
VERTICAL
Mode Info. Displays current screen resolution.
WHITE BALANCE
FACTORY RESET
NO
NO
ANALOG
1280 X 1024 60Hz
MENU
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Software controls
Color depth , screen resolution , an d ch an gin g display fon ts to ClearType are th ree of th e
m ost basic m on itor settin gs you m ay n eed to ch an ge.
Adjusting the color depth
Color depth is th e n um ber of colors your video card uses. Most im ages look best displayed
with th e m axim um n um ber of colors available.
Win dows lets you ch oose from several color depth settin gs for th e m on itor. We recom m en d
th at you use th e 32-bit True Color settin g or th e h igh est settin g available at all tim es.
If th e color in your im ages seem s “false” or “jum py,” especially after you h ave played a
gam e or run a video-in ten sive program , ch eck th e color depth settin g an d return it to 32-bit
True Color, if n ecessary.
To change the color depth:
1 Click Start, th en click Control Panel. Th e Control Panel win dow open s. If your Con trol
Pan el is in Category View, click Appearance and Themes.
2 Click/Double-click th e Display icon . Th e Display Properties dialog box open s.
3 Click th e Settings tab.
Gateway FPD 1940 on Intel(r) 82810E Graphics Controller
9
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Click th e arrow button to open th e Color quality list, th en click th e color depth you
wan t.
5 Click OK, th en click Yes to save your ch an ges.
Help and
Support
For more information about adjusting monitor settings, click Start,
then click Help and Support.
Type the keyword ch an gin g display settin gs in the Search box
, then click the arrow.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the screen resolution
You can ch an ge th e screen resolution to a size you prefer. For exam ple, you can in crease
th e resolution to fit m ore icon s on your desktop, or you can decrease th e resolution to
m ake readin g an d iden tifyin g objects on th e m on itor easier. Th e h igh er th e resolution ,
th e sm aller in dividual com pon en ts of th e screen (such as icon s an d m en u bars) appear.
To change the screen resolution:
1 Click Start, th en click Control Panel. Th e Control Panel win dow open s. If your Con trol
Pan el is in Category View, click Appearance and Themes.
2 Click/Double-click th e Display icon . Th e Display Properties dialog box open s.
3 Click th e Settings tab.
Gateway FPD 1940 on Intel(r) 82810E Graphics Controller
4 Drag th e Screen resolution slider to th e size you prefer.
5 Click OK, th en click Yes to save your ch an ges.
Help and
Support
For more information about adjusting screen resolution, click Start,
then click Help and Support.
Type the keyword ch an gin g screen resolution in the Search box
, then click the arrow.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Clarifying screen fonts
You can ch an ge th e display fon ts to ClearType for sm ooth er screen fon ts.
To change the display fonts to ClearType:
1 Click Start, th en click Control Panel. Th e Control Panel win dow open s. If your Con trol
Pan el is in Category View, click Appearance and Themes.
2 Click/Double-click th e Display icon . Th e Display Properties dialog box open s.
3 Click th e Appearance tab.
4 Click th e Effects button . Th e Effects dialog box open s.
5 Click to select th e Use the following method to smooth the edges of screen type ch eck box.
6 Click th e arrow to open th e list, th en click ClearType.
7 Click OK.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Video modes
Th e m on itor supports several video m odes.
■
Best video m ode is 1280 × 1024 @ 6o Hz.
Th e supported video m odes are:
Screen Resolution
(display mode)
Horizontal
Frequency
Vertical
Frequency
1
2
VGA
VGA
640 × 350
720 × 400
640 × 480
640 × 480
800 × 600
800 × 600
832 × 624
1024 × 768
1024 × 768
1152 × 870
1152 × 900
1280 × 1024
1280 × 1024
31.47 kHz
31.47 kHz
31.47 kHz
37.50 kHz
37.88 kHz
46.88 kHz
49.73 kHz
48.36 kHz
60.12 kHz
68.68 kHz
61.81 kHz
63.98 kHz
79.98 kHz
70 Hz
70 Hz
60 Hz
75 Hz
60 Hz
75 Hz
75 Hz
60 Hz
75 Hz
75 Hz
65 Hz
60 Hz
75 Hz
3
VGA
4
VESA
VESA
VESA
MAC
5
6
7
8
VESA
VESA
MAC
9
10
11
12
13
VESA
VESA
VESA
If you do n ot use th e best m ode for th e m on itor, th e display im age m ay look sligh tly
“fuzzy.”
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Power management
ENERGY STAR
As an ENERGY STAR® Partn er, Gateway h as determ in ed th at th is product m eets th e
ENERGY STAR guidelin es for en ergy efficien cy.
Th is m on itor com plies with th e EPA's In tern ation al ENERGY STAR Program , wh ich is a
program design ed to en courage m an ufacturers of com puter equipm en t to build circuitry
in to th eir products to reduce en ergy con sum ption durin g tim e of n on -use.
Energy declaration
Wh en con n ected to a com puter th at supports th e VESA Display Power Man agem en t
Sign alin g (DPMS) Protocol, th e m on itor can con serve sign ifican t en ergy by reducin g power
con sum ption durin g periods of n on -use. Wh en your com puter goes in to th e en ergy savin g
m ode, th e m on itor will th en en ter th e Active Off m ode (differen t from total sh ut down ).
In th e Active Off m ode th e Power LED will still sh ow oran ge.
Use th ese con ven tion s an d th e power can be reduced to th e followin g levels:
VESA State
On
LED Indicator
Blue
Power Consumption
40 W
Active Off
Orange
≤ 3 W
To “wake” th e m on itor wh en it is in Active Off m ode, m ove th e m ouse or press an y
keyboard key.
Access th e power m an agem en t option s in th e Con trol Pan el to ch an ge th e period of tim e
after wh ich th e m on itor en ters th ese low power states.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance
To keep th e m on itor in optim al workin g order:
■
■
■
■
Do n ot block th e ven tilation h oles.
Do n ot expose th e m on itor to rain or use n ear water.
Keep th e m on itor away from radiators or h eat ven ts.
Keep th e m on itor out of direct sun ligh t.
To clean th e m on itor, use a soft cloth sligh tly m oisten ed with water on ly. Wipe th e cabin et,
screen , an d con trols.
Caution
Do not use any type of abrasive pad or glass cleaner. You will
permanently scratch the screen.
Troubleshooting
If you h ave problem s with th e m on itor, th e in form ation in th is troublesh ootin g section
m ay h elp you solve th em .
Important
Make sure that the monitor has warmed up for approximately
30 minutes before making any judgments about the picture quality.
No power
Make sure th at th e power cord is con n ected correctly to both th e back of th e m on itor
an d th e wall outlet. For m ore in form ation about con n ectin g th e power cord, see
“Con n ectin g th e m on itor” on page 2.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
No picture
■
an d th e wall outlet. For m ore in form ation about con n ectin g th e power cord, see
“Con n ectin g th e m on itor” on page 2.
■
Make sure th at th e video cable is con n ected securely to th e back of th e m on itor an d
com puter. For m ore in form ation about con n ectin g th e video cable, see “Con n ectin g
th e m on itor” on page 2.
■
■
Make sure th at th e m on itor is turn ed on .
If th e power LED is oran ge:
■
■
Make sure th at your com puter is turn ed on .
Move th e m ouse or press an y key on th e keyboard to brin g th e m on itor out of
Active Off m ode.
■
■
■
Restart your com puter with th e m on itor turn ed on .
Ch eck th e en ds of th e video cable for an y pin s th at m igh t be ben t or push ed in .
■
Turn off th e m on itor an d un plug th e video cable from th e back of your com puter.
Turn th e m on itor back on an d wait for ten secon ds. If th e m on itor is fun ction in g
correctly, a self-diagn ostic screen appears. For m ore in form ation about con n ectin g th e
video cable, see “Con n ectin g th e m on itor” on page 2.
Display colors are wrong
■
ideal settin gs.
■
■
Restart your com puter with th e m on itor turn ed on .
Make sure th at th e video cable is con n ected securely to th e back of th e m on itor an d
your com puter. For m ore in form ation about con n ectin g th e power cord, see
“Con n ectin g th e m on itor” on page 2.
■
■
Make sure th at th e video cable is n ot dam aged.
Ch eck th e en ds of th e video cable for an y pin s th at m igh t be ben t or push ed in .
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture has shadows or “ghosts”
■
ideal settin gs.
■
■
Rem ove an y exten sion cables or switch boxes.
Make sure th at th e video cable is con n ected securely to th e back of th e m on itor an d
your com puter. For m ore in form ation about con n ectin g th e power cord, see
“Con n ectin g th e m on itor” on page 2.
■
■
Make sure th at th e video cable is n ot dam aged.
Ch eck th e en ds of th e video cable for an y pin s th at m igh t be ben t or push ed in .
Color is not uniform
■
Make sure th at th e m on itor warm s up for at least 30 m in utes before m akin g a fin al
judgm en t about color un iform ity or brigh tn ess.
■
Press th e AUTO/SELECT button to autom atically adjust th e display im age to th e
ideal settin gs.
■
Press th e AUTO/SELECT button to autom atically adjust th e display im age to th e
ideal settin gs.
■
Use th e position con trols to adjust th e im age. For in struction s on h ow to adjust th e
display im age position , see “Adjustin g m on itor settin gs” on page 5.
The monitor has pixels that are always dark or too
bright
Th is con dition is n orm al an d in h eren t in th e TFT tech n ology used in active-m atrix LCD
screen s. Gateway’s in spection stan dards keep th ese to a m in im um . If you feel th ese pixels
are un acceptably n um erous or den se on your display, con tact Gateway Tech n ical Support
to iden tify wh eth er a repair or replacem en t is justified based on th e n um ber of pixels
affected.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Specification s are subject to ch an ge with out n otice or obligation .
17-inch active-matrix TFT (Thin Film Transistor) LCD
1280 × 1024
Monitor
Best screen resolution
Display colors
Power input
Over 16 million colors
AC 100-240 V 50/60 Hz 1.0 A
Normal operation: 40 W
Power consumption
Active Off operation: ≤ 3 W
14.57 × 8.78 × 16.57 inches
(37.00 × 22.30 × 42.10 cm)
Dimensions
®
Meets EPA ENERGY STAR and VESA DPMS requirements
Power management
Certifications
UL, cUL, EPA, and FCC Class B, NOM
Man y products for Gateway an d its subsidiaries are custom en gin eered by our suppliers
to Gateway specification s an d m ay vary from sim ilarly m arketed products.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Important safety information
Your Gateway system is design ed an d tested to m eet th e latest stan dards for safety of in form ation tech n ology
equipm en t. However, to en sure safe use of th is product, it is im portan t th at th e safety in struction s m arked on th e
product an d in th e docum en tation are followed.
Warning
Always follow these instructions to help guard against personal injury
and damage to your Gateway system.
Setting up your system
■
Read an d follow all in struction s m arked on th e product an d in th e docum en tation before you operate your
system . Retain all safety an d operatin g in struction s for future use.
■
■
■
■
Do n ot use th is product n ear water or a h eat source such as a radiator.
Set up th e system on a stable work surface.
Th e product sh ould on ly be operated from th e type of power source in dicated on th e ratin g label.
If your product h as a voltage selector switch , m ake sure th at th e switch is in th e proper position for your area.
Th e voltage selector switch is set at th e factory to th e correct voltage.
■
■
Open in gs in th e m on itor case are provided for ven tilation . Do n ot block or cover th ese open in gs. Make sure
you provide adequate space, at least 6 in ch es (15 cm ), aroun d th e system for ven tilation wh en you set up your
work area. Never in sert objects of an y kin d in to th e m on itor ven tilation open in gs.
Som e products are equipped with a th ree-wire power cord to m ake sure th at th e product is properly groun ded
wh en in use. Th e plug on th is cord will on ly fit in to a groun din g-type outlet. Th is is a safety feature. If you are
un able to in sert th e plug in to an outlet, con tact an electrician to in stall th e appropriate outlet.
■
■
If you use an exten sion cord with th is system , m ake sure th at th e total am pere ratin g on th e products plugged
in to th e exten sion cord does n ot exceed th e exten sion cord am pere ratin g.
If your system is fitted with a TV Tun er, cable, or satellite receiver card, m ake sure th at th e an ten n a or cable
system is electrically groun ded to provide som e protection again st voltage surges an d buildup of static ch arges.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Care during use
■
Do n ot walk on th e power cord or allow an yth in g to rest on it.
■
Do n ot spill an yth in g on th e system . Th e best way to avoid spills is to avoid eatin g an d drin kin g n ear your
system .
■
Do n ot expose th e m on itor to rain or use n ear water. If th e m on itor does get exposed to m oisture, un plug it
an d allow it to dry for 24 h ours. Call Gateway Tech n ical Support for advice on wh eth er th e m on itor is safe to
turn back on .
■
■
Wh en th e m on itor is turn ed off, a sm all am oun t of electrical curren t still flows th rough th e m on itor. To avoid
electrical sh ock, always un plug all power cables an d m odem cables from th e wall outlets before clean in g th e
system .
Un plug th e system from th e wall outlet an d refer servicin g to qualified person n el if:
■
Th e power cord or plug is dam aged.
■
Liquid h as been spilled in to th e system .
■
Th e system does n ot operate properly wh en th e operatin g in struction s are followed.
■
Th e system was dropped or th e cabin et is dam aged.
■
Th e system perform an ce ch an ges.
Warning
To prevent electric shock, never remove the cover. No user
serviceable parts inside. Refer servicing to qualified service
personnel.
Replacement parts and accessories
Use on ly replacem en t parts an d accessories recom m en ded by Gateway.
Warning
Do not use Gateway products in areas classified as hazardous
locations. Such areas include patient care areas of medical and
dental facilities, oxygen-laden environments, or industrial facilities.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Regulatory compliance statements
United States of America
Federal Communications Commission (FCC) Unintentional emitter per FCC Part 15
Th is device h as been tested an d foun d to com ply with th e lim its for a Class B digital device, pursuan t to Part 15
of th e FCC rules. Th ese lim its are design ed to provide reason able protection again st h arm ful in terferen ce in a
residen tial in stallation . Th is equipm en t gen erates, uses, an d can radiate radio frequen cy en ergy an d, if n ot
in stalled an d used in accordan ce with th e in struction s, m ay cause h arm ful in terferen ce to radio or television
reception . However, th ere is n o guaran tee th at in terferen ce will n ot occur in a particular in stallation . If th is
equipm en t does cause in terferen ce to radio an d television reception , wh ich can be determ in ed by turn in g th e
equipm en t off an d on , th e user is en couraged to try to correct th e in terferen ce by on e or m ore of th e followin g
m easures:
■
Reorien t or relocate th e receivin g an ten n a
■
In crease th e separation between th e equipm en t an d receiver
■
Con n ect th e equipm en t to an outlet on a differen t circuit from th at to wh ich th e receiver is con n ected
■
Con sult th e dealer or an experien ced radio/TV tech n ician for h elp.
Com plian ce Accessories: Th e accessories associated with th is equipm en t are: sh ielded video cable. Th ese
accessories are required to be used in order to en sure com plian ce with FCC rules.
FCC declaration of conformity
Resp on sible p arty:
Gateway, In c.
14350 Myford Road
Irvin e, CA 92606 USA
Th is device com plies with Part 15 of th e FCC Rules. Operation of th is device is subject to th e followin g two
con dition s: (1) th is device m ay n ot cause h arm ful in terferen ce, an d (2) th is device m ust accept an y in terferen ce
received, in cludin g in terferen ce th at m ay cause un desired operation .
Caution
Changes or modifications not expressly approved by Gateway could
void the FCC compliance and negate your authority to operate the
product.
California Proposition 65 Warning
Warning
This product contains chemicals, including lead, known to the State
of California to cause cancer, birth defects or reproductive harm.
Mercury Warning
Warning
Hg
lamp(s) inside this product contain mercury and must be
recycled or disposed of according to local, state, or federal laws.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Canada
Industry Canada (IC) Unintentional emitter per ICES-003
Th is digital apparatus does n ot exceed th e Class B lim its for radio n oise em ission s from digital apparatus as set
out in th e radio in terferen ce regulation s of In dustry Can ada.
Le présen t appareil n um érique n ’ém et pas de bruits radioélectriques dépassan t les lim ites applicables aux
appareils n um ériques de Classe B prescrites dan s le règlem en t sur le brouillage radioélectrique édicté par In dustrie
Can ada.
EPA ENERGY STAR
®
As an ENERGY STAR Partn er, Gateway h as determ in ed th at th is product m eets th e ENERGY
STAR guidelin es for en ergy efficien cy wh en used with a com puter equipped with a Display Power
Man agem en t System .
ENERGY STAR
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Notices
Copyright © 2004 Gateway, Inc.
All Rights Reserved
14303 Gateway Place
Poway, CA 92064 USA
All Rights Reserved
This publication is protected by copyright and all rights are reserved. No part of it may be reproduced or transmitted by any
means or in any form, without prior consent in writing from Gateway.
The information in this manual has been carefully checked and is believed to be accurate. However, changes are made
periodically. These changes are incorporated in newer publication editions. Gateway may improve and/or change products
described in this publication at any time. Due to continuing system improvements, Gateway is not responsible for inaccurate
information which may appear in this manual. For the latest product updates, consult the Gateway Web site at
www.gateway.com. In no event will Gateway be liable for direct, indirect, special, exemplary, incidental, or consequential
damages resulting from any defect or omission in this manual, even if advised of the possibility of such damages.
In the interest of continued product development, Gateway reserves the right to make improvements in this manual and the
products it describes at any time, without notices or obligation.
Trademark Acknowledgments
Gateway and the Black-and-White Spot Design are trademarks or registered trademarks of Gateway, Inc. in the U.S. and
other countries. SpotShop, Spotshop.com, and Your:)Ware are trademarks of Gateway, Inc. Intel, Intel Inside logo, and
Pentium are registered trademarks and MMX is a trademark of Intel Corporation. Microsoft, MS, MS-DOS, and Windows are
trademarks or registered trademarks of Microsoft Corporation. All other product names mentioned herein are used for
identification purposes only, and may be the trademarks or registered trademarks of their respective companies.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
MAN LG FPD1750 USR GDE R0 07/04
Download from Www.Somanuals.com. All Manuals Search And Download.
|