Garland Electric Grill MWE3W User Manual

INSTALLATION AND  
OPERATION MANUAL  
GARLAND ELECTRIC  
CLAMSHELL GRILL  
WITH PRODUCT RECOGNITION  
MODEL MWE3W  
WARNING:  
IMPROPER INSTALLATION, ADJUSTMENT, ALTERATION, SERVICE OR MAINTENANCE CAN CAUSE  
PROPERTY DAMAGE, INJURY OR DEATH. READ THE INSTALLATION, OPERATING AND MAINTENANCE  
INSTRUCTIONS THOROUGHLY BEFORE INSTALLING OR SERVICING THIS EQUIPMENT.  
PLEASE READ ALL SECTIONS OF THIS MANUAL AND RETAIN FOR FUTURE REFERENCE.  
THIS EQUIPMENT MUST BE INSTALLED AND COMMISSIONED BY A PROFESSIONAL,  
FACTORY-TRAINED TECHNICIAN.  
THIS EQUIPMENT MUST BE OPERATED UNDER AN APPROVED HOOD SYSTEM ONLY.  
NOTE:This manual pertains to all grill models listed above. The reader/operator must interpret its contents  
to applicable needs. If you have questions about any instructional materials pertaining to Garland grills,  
please contact our Customer Service Department at one of the phone numbers below.  
MANUFACTURED EXCLUSIVELY FOR McDonald's BY  
GARLAND COMMERCIAL INDUSTRIES, LLC  
185 EAST SOUTH STREET FREELAND, PENNSYLVANIA 18224  
TOLL FREE: (800) 446-8367 PHONE: (570) 636-1000 FAX: (570) 636-9874  
PART #4521777 (03/19/08)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GARLAND ELECTRIC CLAMSHELL GRILL WITH PRODUCT RECOGNITION MODEL MWE3W  
INSTALLATION/OPERATION MANUAL  
CONTENTS  
INTRODUCTION                                                                                                           4  
WARRANTY                                                                                                                  4  
SAFETY                                                                                                                          5  
SHIPPING DAMAGE CLAIM PROCEDURE                                                              6  
CLEANING & MAINTENANCE                                                                                   6  
SPECIFICATIONS                                                                                                         8  
INSTALLATION                                                                                                             9  
Installation Store Responsibilities: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9  
A Start-Up DOES NOT include:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9  
A start-up DOES include: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9  
Items included with the purchase of your new grill from Manufacturer:. . . . . . . . . . . . . . . . . . . . . .9  
Items NOT INCLUDED from the manufacturer and should be purchased from the KES: . . . . . . .9  
INSTALLATION OF RELEASE MATERIAL                                                               12  
INSTALLATION OF SPLASH SHIELD                                                                     13  
DESCRIPTION OF GRILL CONTROL                                                                       14  
POSSIBLE ERROR MESSAGES                                                                                 14  
OPERATING PROCEDURES                                                                                     15  
General Overview: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15  
To turn the grill on: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15  
To Select a Menu item: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15  
Menu Item Library . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15  
Indicator Lights. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16  
Standby Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16  
To Exit the Standby Mode: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16  
To Display the Current Temperatures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16  
Cooking Procedures in manual Mode BREAKFAST. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16  
Cooking Procedures in manual Mode LUNCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16  
To Change the Cook Time for a Menu Item. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16  
AUTO Mode (Product Recognition) BREAKFAST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17  
AUTO Mode (Product Recognition) LUNCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17  
4:1 & 10:1 Meat Lay Patterns: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17  
PRODUCT RECOGNITION                                                                                        17  
PROGRAM LOGIC                                                                                                      18  
CONTROL PROGRAMMING                                                                                     19  
Programming Modes; System Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19  
Programming Modes; Menu Items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20  
PROBE CALIBRATION                                                                                               23  
THERMOCOUPLE LOCATIONS                                                                               23  
MENU ITEM PARAMETERS                                                                                     24  
PROGRAMMING: SYSTEM FUNCTION OPTIONS                                               25  
TEMPERATURE CONVERSION CHART                                                                 26  
PART #4521777 (03/19/08)  
Page 3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATION/OPERATION MANUAL  
GARLAND ELECTRIC CLAMSHELL GRILL WITH PRODUCT RECOGNITION MODEL MWE3W  
INTRODUCTION  
The Garland clamshell grill, manufactured exclusively for McDonald’s, provides a method for efficient two-sided cooking,  
while accommodating a variety of products. The unit will also serve as a flat grill, and meets all of McDonald’s standards  
for safety, efficiency, and cleanliness.  
WARRANTY  
This warranty covers defects in material and workmanship under normal use providing that:  
a) the equipment has not been accidentally or intentionally damaged, altered or misused.  
b) the equipment is properly installed, adjusted, operated and maintained in accordance with national and local  
codes and in accordance with the installation instructions provided with this product.  
c) the warranty serial number affixed to the appliance by us has not been defaced, obliterated or removed.  
d) an acceptable report for any claim under this warranty is supplied to us.  
The equipment warranty coverage remains in force for two (2) years, (parts and labor), from the date the equipment is put  
into operation.  
The Garland Group agrees to repair or replace, at it’s option, any part that proves to be defective in material or  
workmanship at no charge for the part or normal labor.  
We assume no responsibility for installation, adjustments, diagnosis, or normal maintenance such as: lubrication of springs  
or valves. We exclude failures caused by erratic voltage or gas supplies.  
We assume no responsibility for travel costs beyond 100 miles round trip, travel other than overland, and overtime  
costs of repair.  
We exclude broken glass, paint and porcelain finish, surface rust, gasket material, ceramic material, light bulbs and  
fuses from normal coverage.  
We exclude damage or dysfunction caused by fire, flood, and likeActs of Godthat are beyond the control of The  
Garland Group.  
The Garland Group’s liability on a claim of warranty shall not exceed the price of the material and/or service, which caused  
the claim.  
This warranty is limited and is in lieu of all other warranties, expressed or implied. The Garland Group, our employees,  
or our agents shall not be held liable for any claims of personal injury or consequential damage or loss.  
This warranty gives you specific legal rights, and you may have other rights which vary from state to state.  
Page 4  
PART #4521777 (03/19/08)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GARLAND ELECTRIC CLAMSHELL GRILL WITH PRODUCT RECOGNITION MODEL MWE3W  
INSTALLATION/OPERATION MANUAL  
SAFETY  
THIS GRILL MUST be operated by persons who have been given adequate training.  
CAUTION: THIS EQUIPMENT MUST ONLY BE OPERATED UNDER AN APPROVED HOOD SYSTEM.  
DO NOT OPERATE THE GRILL UNLESS IT HAS BEEN COMMISSIONED (START-UP) BY A FACTORY AUTHORIZED SERVICE CENTER.  
DO NOT operate the grill without reading this operation manual.  
DO NOT operate the clamshell grill unless it has been properly installed and grounded. DO NOT operate the clamshell grill  
unless all service and access panels are in place and fastened properly.  
Means of disconnection, must be incorporated in the fixed wiring in accordance with local wiring rules (such as a switch,  
fuse, or circuit breaker).  
External equipotential bonding conductor provided on rear of appliance. Use as applicable, in accordance with local wiring rules.  
The Garland clamshell grill is a semi-automatic cooking appliance. The upper platen is lowered automatically, following the  
manual; single-handed initiation of the cooking cycle, and the upper platen is raised automatically upon completion of the  
cooking cycle.  
When two sided cooking, the area between the upper platen and the griddle plate should be regarded as a “danger zone.  
During two sided cooking the operator must not be within this danger zone. When used as a flat grill, then this area is no  
longer a danger zone, the platens do not move.  
For whatever reason, be it cleaning, maintenance, normal operation, any exposed person must use extreme caution if within  
this danger zone.  
In two side cooking the upper platen remains in the lowered position by nature of it’s own weight. It is not locked down. It  
can be raised by lifting of the handle on the front of the platen, which pivots the platen about its rear mounting point.  
The clamshell grill must only be used for single and two sided cooking of foodstuffs in a McDonald’s store and must not be  
used for any other purpose.  
WARNING: To avoid serious personal injury: DO NOT attempt to repair or replace any part of the clamshell grill unless all  
main power supplies to the grill have been disconnected.  
USE EXTREME CAUTION in setting up, operating and cleaning the clamshell grill to avoid coming in contact with hot grill  
surfaces or hot grease. Suitable protective clothing should be worn to prevent the risk of burns.  
WARNING: This appliance must not be cleaned with a water jet. DO NOT apply ice to a HOT grill surface.  
NOTE: All warning labels and markings on the grill, which call attention to further dangers and necessary precautions.  
HAZARD COMMUNICATION STANDARD, (HCS) - The procedures in this manual include the use of chemical products. These  
chemical products will be printed in bold face, followed by the abbreviation (HCS) in the text portion of the procedure. See  
the Hazard Communication Standard, (HCS) manual for the appropriate Material Safety Data Sheet(s), (MSDS).  
WARNING: After turning the master power switch to the START position, the grill will go through an initialization process.  
If the upper platens are in the lowered position they will return to their raised upper position. This movement takes ap-  
proximately 8 seconds.  
MAINTENANCE - the platen support arms carriage block bearing bushes, the platen adjuster nuts, the platen support (shoulder)  
bolt and the cam follower should be checked annually for wear. Should there be any noticeable play in the bearing bushes  
and any visible wear on the platen adjuster nuts, platen support bolts or cam follower, then they must be replaced.  
MAINTENANCE - the audible alarm that sounds at the end of a cook cycle is to advise the operator that the platen is about  
to move. The function of this device may be tested by pushing the left hand CANCEL button. If no sound is heard, ensure  
that the alarm volume is not set to low in SYSTEM SETUP. If there is still no sound then a service engineer should be called  
out to rectify the fault.  
SERVICE AND CLEANING - The grill may be secured in the grill bay by the installer using two anchors that lock onto the front  
casters. If the grill is to be moved out of the bay for cleaning or service, remove the anchor from each caster by turning the  
knob counterclockwise to loosen the retainer. When the retainer is free of the caster, lay the assembly aside on the floor.  
CLEANING - NEVER clean the grill, interior or exterior, using a high-pressure sprayer, water jet, or any other liquid sprayer.  
NOTE: If anchors are present, the anchor assembly remains fastened to the back wall of the grill bay. After service or clean-  
ing is complete, return the grill to its position in the bay and reattach the anchors by placing the retainer on the caster post  
and turning the knob clockwise to tighten.  
NOTE: For safety reasons, the grill must be secured in the grill bay in this manner before operation can resume.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATION/OPERATION MANUAL  
GARLAND ELECTRIC CLAMSHELL GRILL WITH PRODUCT RECOGNITION MODEL MWE3W  
SHIPPING DAMAGE CLAIM PROCEDURE  
Please note that the Garland equipment was carefully inspected and packed by skilled personnel before leaving the  
factory. The transportation company assumes full responsibility for safe delivery upon acceptance of the equipment. What  
to do if the equipment arrives damaged:  
1. File a claim immediately regardless of the extent of damage.  
2. Be sure to note,visible loss or damage,on the freight bill or express receipt and have the person making the delivery  
sign it.  
3. Concealed loss or damage: if damage is unnoticed until the equipment is unpacked, notify the freight company  
immediately, (within 15 days), and file a concealed damage claim.  
CLEANING & MAINTENANCE  
The following information is also available on the  
McDonalds MRC Card 11A.  
4. Remove the release sheet locking clips and bars. Clean  
the release sheets following the instructions provided  
by your local cleaning chemical supplier.  
Tools: McD Hi-Temp Grill Cleaner (HCS), McD All Purpose  
Super Concentrate (HCS), McD’s NOSCRATCH™ Pad and  
Pad Holder, a suitable container, High-Temperature Pot  
Brush and Grill Cloth, Stainless Steel Pan Filled With  
Lukewarm Water, Protective Gloves, (to protect hands from  
heat), Grill Squeegee and Grill Scraper.  
5. Scrape only the lower grill surface with the grill scraper,  
and squeegee any residue into the grease troughs with  
the grill squeegee.  
Caution: Do not scrape or otherwise scratch the upper  
platens. The use of metal scrapers, abrasive pads, or wire  
brushes will permanently damage the surface of the upper  
platens.  
Warning: The upper platen surface and edges are very  
hot! To prevent burn injuries, use extreme caution when  
wiping down release sheets and platen edges.  
6. Open one packet of McD Hi-Temp Grill Cleaner, (HCS),  
and empty the contents into a suitable container. (One  
packet cleans a 3ft. grill).  
Important: Frequently throughout the day, (at least 4  
times per hour), thoroughly wipe down the release sheets  
and platen edges with a damp grill cloth.  
7. Firmly attach the McD NO-SCRATCH™ Pad to the pad  
holder.  
1. Select Manual mode using the button.  
8. Dip the NO-SCRATCH™ Pad into the grill cleaner.  
PRESS the OR arrow buttons untilCLEAN MODE”  
is displayed, (the control will maintain the proper  
cleaning temperature).  
9. Spread a light coating of grill cleaner over the entire  
platen surface, BACK, FRONT AND SIDE EDGES of all  
upper platens. DO NOT SCRUB WHILE APPLYING THE  
PRODUCT.  
Repeat with the other control.READY TO CLEANwill  
be displayed and an audible alarm will sound when the  
grill is at the proper cleaning temperature.  
10. After applying the grill cleaner, lightly scrub the platen  
surfaces, BACK, FRONT AND SIDE EDGES with the NO-  
SCRATCH™ Pad until all the soil has been liquefied by  
the grill cleaner. For stubborn soils, apply additional  
grill cleaner and lightly scrub. DO NOT RINSE THE  
PLATENS AT THIS TIME.  
Press the GREEN pushbutton to displayOFF.” The  
“OFFposition on the controller allows the operator  
to raise and lower the platen, (for clamshell grills), to  
alternate positions for cleaning of the platen edges.  
2. Empty and replace the grease troughs. Grease troughs  
should be emptied and replaced consistent with store  
security policy.  
11. Starting at the back of the lower grill, spread a light  
coating of grill cleaner over the entire surface. DO NOT  
SCRUB WHILE APPLYING THE PRODUCT.  
3. Put on the protective gloves and wipe down the  
exposed surface of the release sheet with a damp  
grill cloth.  
12. After applying the grill cleaner, lightly scrub the grill  
surface with the NO-SCRATCH™ Pad until all the soil has  
been liquefied.  
Page 6  
PART #4521777 (03/19/08)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GARLAND ELECTRIC CLAMSHELL GRILL WITH PRODUCT RECOGNITION MODEL MWE3W  
INSTALLATION/OPERATION MANUAL  
CLEANING & MAINTENANCE continued  
13. Rinse the upper platens with a dripping wet grill cloth.  
RINSE PLATEN EDGE THOROUGHLY, THEN WIPE DOWN  
BACK EDGE OF PLATEN.  
17. Wipe the lower grill surface, backsplash, bullnose, and  
hood with a clean, damp grill cloth.  
AFTER CLEANING: Apply a thin coat of fresh shortening  
to the lower grill surface only. Wipe down the surrounding  
areas. Empty, wash, rinse, and replace the grease troughs.  
14. Carefully pour small quantities of lukewarm water  
onto the grill while brushing the surface, backsplash,  
and bullnose with a LONGLIFE™ pot brush or  
equivalent high-temperature brush. Continue until the  
water no longer boils away and the grill remains wet.  
Squeegee dry.  
Note: Repeat this procedure to clean additional grills.  
Reverse NO-SCRATCH™ Pad, and use clean side.  
CLEANING AFTER EACH RUN OF PRODUCT:  
Caution: Ice, cold water, or large quantities of water must  
never be applied to the grill plate or upper platen. Severe  
damage to the grill will occur!  
Using grill scraper, scrape grease on lower grill plate from  
front to back only. Do not scrape across the rear of the  
lower grill plate with grill scraper. Use wiper squeegee  
to clean release material sheet on upper platen in a  
downward motion.  
15. Clean the release sheets as follows:  
16. Place the sheets on the lower grill. Scrub both sides of  
the sheets with the same McD NO-SCRATCH™ Pad used  
on the grill.  
Hold handle at a slight upward angle with wiper end  
facing downward. Do not press hard against the release  
material sheet to prevent scratching or tearing.  
Note: It is generally not necessary to apply additional  
product to the NO-SCRATCH™ Pad. If the pad is not wet  
enough rewet with a small amount of water, if no cleaner  
is left.  
Push the grease at the rear of the lower grill plate into the  
grease cans using the wiper squeegee only. Do not use the  
grill scraper for this step.  
a. Rinse both sides of the sheets with a wet grill cloth.  
Warning: Grill Temperatures will cause severe skin burns.  
b. Rinse the lower grill by flooding the surface twice  
with lukewarm water. Squeegee after each rinse.  
Use the grill cloth to clean back splash and bullnose areas  
as needed during operation.  
Note: To increase life of release material sheet, wipe down  
with folded grill cloth four (4) times every hour.  
PART #4521777 (03/19/08)  
Page 7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATION/OPERATION MANUAL  
GARLAND ELECTRIC CLAMSHELL GRILL WITH PRODUCT RECOGNITION MODEL MWE3W  
SPECIFICATIONS  
Model MWE3W  
24.000  
[610mm]  
(PLATE DEPTH)  
5.475  
[139mm]  
34.968  
[888mm]  
36.000  
[914mm]  
(PLATE WIDTH)  
38.000  
[965mm]  
4.064  
[103mm]  
SK07-587 (ELEC)  
"COLD ZONE"  
48°  
1.500  
[38mm]  
30.714  
[780mm]  
28.771  
[731mm]  
.787  
[20mm]  
15.384  
1.598  
[41mm]  
[391mm]  
1.516  
30.750  
[781mm]  
TO  
[39mm]  
24.084  
7.875 [200mm]  
[612mm]  
33.000  
[838mm]  
(COOKING  
HEIGHT)  
9.684  
[246mm]  
2.993  
[76mm]  
26.679  
[678mm]  
23.812  
[605mm]  
6.106  
[155mm]  
13.123  
[333mm]  
BOTTOM CABLE  
ENTRANCE  
9.335  
[237mm]  
BOTTOM CABLE  
ENTRANCE  
36.027  
[915mm]  
LOADING: (kW/PHASE)  
MODEL MWE3W  
NOMINAL AMPS PER LINE  
208V / 60Hz 220V / 60Hz 240V / 60Hz  
NEMA  
RECEPTACLE  
(2) 50-AMP TOTAL  
208V / 220V / 240V  
CIRCUITS &  
INTERLOCK LOAD  
kW  
L1/L2 L1/L3 L2/L3 L1 L2 L3 L1 L2 L3 L1 L2 L3  
REQUIRED  
INPUT 1  
INPUT 2  
7.65  
2.55  
5.10  
2.55  
5.10  
2.55 21.3 21.3 21.3 20.1 20.1 20.1 18.4 18.4 18.4  
5.10 42.6 42.6 42.6 40.2 40.2 40.2 36.8 36.8 36.8  
15-50R  
15-50R  
15.30  
INTERLOCK  
HVAC Hood / Fire Suppression Interlock Circuit: 7 Amps / 120V / Single Phase  
L21-20R  
Page 8  
PART #4521777 (03/19/08)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GARLAND ELECTRIC CLAMSHELL GRILL WITH PRODUCT RECOGNITION MODEL MWE3W  
INSTALLATION/OPERATION MANUAL  
INSTALLATION  
5. Verify operation of platens, if applicable, and timer  
functions.  
Installation Store Responsibilities:  
Ensure grill has been installed by a competent trained  
installation person.  
6. Ensure time out alarm is functional and platens raise (if  
applicable)  
Ensure store readiness of utilities, product & personnel.  
7. Set proper gas and verify with beef integrity check that  
two consecutive runs yield the approved beef integrity  
results as per McDonalds standards.  
Contacting your local Garland Factory Authorized  
Service Center for a start up date.  
Participate in the start up to ensure a successful start  
up and familiarity with the grill.  
8. Conduct brief training to store manager on the  
operation of the grill.  
Conduct training with your crew personnel to ensure  
maximum utilization of the grill.  
Items included with the purchase of your  
new grill from Manufacturer:  
Once the installation is complete as per the procedures  
below, a factory authorized service company MUST start  
up the grill according to Garland Commercial Industries  
start up standards.  
1. Grill  
2. Gas Hose (For gas grills only)  
3. One (1) box containing:  
a. Three (3) Teflon sheets  
b. Three (3) Teflon front clips  
c. Three (3) Rear rods.  
A Start-Up DOES NOT include:  
1. Uncrating the unit  
2. Placing the unit in its position under the hood.  
3. Leveling the grill on the floor under the hood.  
4. One (1) box containing four (4) casters.  
Items NOT INCLUDED from the manufacturer  
and should be purchased from the KES:  
4. Attaching the supply cord(s) unless supplied by the  
factory.  
1. Electrical Cords  
2. Flue Box  
5. Making adjustments to the ventilation system.  
6. Sheet metal work required due to improper hood  
application.  
3. Grease traps & rails  
7. Adjusting the grill to achieve beef integrity that  
deviates from the McDonalds standard.  
THE FOLLOWING INSTALLATION  
PROCEDURE CAN BE PERFORMED BY A:  
A start-up DOES include:  
FACTORY AUTHORIZED SERVICE CENTER  
1. Verification of supply voltage and, if applicable gas  
supply.  
AN APPROVED INSTALLATION PERSON APPROVED BY  
PURCHASER OF GRILL  
2. Leak test and gas pressure check on gas grills.  
3. Electrical safety check.  
LICENSED INSTALLER CONTRACTED BY KES (KITCHEN  
EQUIPMENT SUPPLIER)  
4. Verify operation of grill by allowing unit to attain set  
temperature.  
WARNING: PLEASE READ INSTALLATION INSTRUCTIONS CAREFULLY. FAILURE TO PERFORM  
THESE STEPS CAN RESULT IN EQUIPMENT FAILURE, DAMAGE AND / OR VOID OF WARRANTY.  
PART #4521777 (03/19/08)  
Page 9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATION/OPERATION MANUAL  
GARLAND ELECTRIC CLAMSHELL GRILL WITH PRODUCT RECOGNITION MODEL MWE3W  
INSTALLATION (continued)  
1. Uncrate unit from crating material  
3. Carefully rotate grill back on its casters.  
IMPORTANT: RATING PLATE FOR THIS EQUIPMENT IS  
LOCATED IN TWO PLACES. ONE IS LOCATED INSIDE BACK  
PANEL ON LEFT SIDE, SECOND RATING PLATE LOCATED  
UNDER FRONT CONTROL PANEL IN CENTER.  
4. Remove back body side and Install power cords per  
your country / areas specifications.  
MWE3 Standard Electrical Cord Hookup  
CAUTION: Prior to installation, check the electrical supply  
to ensure input voltage and phase match the equipment  
voltage rating and phase. See data plate located rear left  
side of grill. Back panel removal is required.  
2 x 50AMP NEMA 15-50  
NOTE: ENSURE THAT PLATENS ARE STRAPPED DOWN TO  
PREVENT PLATENS FROM RAISING. SEVERE DAMAGE MAY  
OCCUR.  
1 x 20AMP NEMA 21-20  
Lim 120 120 Com Wht Wht Wht Ora Red Blk  
E
E
Lim  
Ora Red Blk  
Lim Lim 120 120 Com Wht Wht Wht  
WARNING: Electrical appliances must be electrically  
grounded in accordance with local codes or in the absence  
of local codes, with national electric code ANSI/NFPA  
- latest version.  
5. Install grease bucket rails as shown below:  
2. Tip unit over on its back, and install casters. Lock jam  
nuts in place.  
Page 10  
PART #4521777 (03/19/08)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GARLAND ELECTRIC CLAMSHELL GRILL WITH PRODUCT RECOGNITION MODEL MWE3W  
INSTALLATION/OPERATION MANUAL  
INSTALLATION (continued)  
6. With the platens in the raised position, measure the  
height from the front edge of the platen to the grill  
surface. Determine which type of hood the store has  
and check for hood type/platen height compatibility  
according to the table below:  
7. Install flue box to back of grill.  
HOOD TYPE  
Universal  
92 Series  
GSC  
CORRECT PLATEN HEIGHT  
18 12(470mm)  
17(432mm)  
18 12(470mm)  
PLATEN  
HEIGHT  
GRILL  
PLATE  
8. Roll grill under hood. Grill must be level front to back,  
side to side and diagonally. Adjust casters accordingly  
to obtain final level.  
If the platen height is incompatible with the hood  
type, platen height must be adjusted by an authorized  
service agent.  
PART #4521777 (03/19/08)  
Page 11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATION/OPERATION MANUAL  
GARLAND ELECTRIC CLAMSHELL GRILL WITH PRODUCT RECOGNITION MODEL MWE3W  
INSTALLATION OF RELEASE MATERIAL  
The following are the procedures for installing the teflon sheets on the upper platen on the Garland Clamshell grill. The  
components shown below are included with your grill when purchased.  
1. Slide release material rod through hemmed end of the  
release material sheet.  
4. Place locking clips over release material sheet and  
press into place over release material bar.  
HEMMED  
LOOP  
LOCKING  
CLIP  
MATERIAL  
ROD  
RELEASE  
MATERIAL  
MATERIAL  
ROD  
RELEASE  
MATERIAL  
Teflon Sheet” available from your DC  
Saint Gobain: DC WRIN # 01281-015  
Taconic: DC WRIN # 01281-018  
UPPER  
PLATEN  
(SIDE VIEW)  
2. Hook release material rod on brackets located at the  
rear of the upper platen.  
5. Check alignment and tightness of release material  
against upper platen.  
NOTE: Installing release material sheets too tight may  
cause premature failure of the sheet. Installing only 1 clip  
on over the release material bar may cause the release  
material sheet to be too loose. Ensure that 2 clips are  
installed on the teflon bar at all times.  
UPPER  
Release material sheets should be replaced when:  
Product sticks to release material  
PLATEN  
(SIDE VIEW)  
RELEASE  
Carbon build-up causes problems in taste or  
appearance.  
MATERIAL  
ROD  
MATERIAL  
MATERIAL ROD  
HOLDER  
A tear in the release material sheet’s cooking area.  
Release material coating is worn off sheet.  
3. Holding the bottom of the release material sheet in  
place, gently pull the sheet toward the front of the  
platen.  
NOTE: Rotate the release sheets on daily basis  
NOTE: Make sure release material fits smoothly over  
upper platen.  
Page 12  
PART #4521777 (03/19/08)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GARLAND ELECTRIC CLAMSHELL GRILL WITH PRODUCT RECOGNITION MODEL MWE3W  
INSTALLATION/OPERATION MANUAL  
INSTALLATION OF SPLASH SHIELD  
PLATEN ARM  
ARM CARRIAGE BLOCK  
ARM CARRIAGE BLOCK PIN  
SPLASH SHIELD TAB  
SPLASH SHIELD  
SURFACE OF  
GRILL PLATE  
NOTE: SOME PARTS REMOVED FOR CLARITY  
SPLASH SHIELD TABS  
UP AND OVER  
ARM CARRIAGE PINS  
IN THIS DIRECTION  
NOTE: SOME PARTS REMOVED FOR CLARITY  
PART #4521777 (03/19/08)  
Page 13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATION/OPERATION MANUAL  
GARLAND ELECTRIC CLAMSHELL GRILL WITH PRODUCT RECOGNITION MODEL MWE3W  
DESCRIPTION OF GRILL CONTROL  
Right Arrow Button – In any mode, scrolls  
forward through a list  
Left Arrow Button – In any mode, scrolls  
backward through a list  
Enter Button – In the normal operating  
mode, this button is not active. In the  
Programming Mode, used to lock in the  
values shown on the display.  
Power Button – PRESSING and HOLDING the  
Power button for 2 seconds will either turn  
the controller on or off.  
Program Button – In the normal  
operating mode, pressing and holding the  
PROGRAM button for 3 seconds enters the  
Programming Mode.  
AM/PM Button – In normal operating mode,  
toggles between the AM menu library and  
the PM menu library.  
Temp Button – In the normal operating  
mode, displays the set temperature and the  
actual temperature.  
AUTO/MAN Button – In normal operating  
mode, toggles between Automatic Product  
Recognition and Manual Cooking.  
Speed Key – In the normal operating mode,  
used to change cook time. Also used to enter  
Probe Calibration Mode.  
Up Arrow Button – In any mode, increases  
the value of the flashing cursor character in  
the display  
Standby Button – In the normal operating  
mode, places the grill in Standby Mode.  
Down Arrow Button – In any mode,  
decreases the value of the flashing cursor  
character in the display  
POSSIBLE ERROR MESSAGES  
GRILL PROBE ERROR – A grill temperature probe circuit error for temperature zone (Front, Middle, or Back) has occurred.  
PLATEN PROBE ERROR – An upper platen temperature probe circuit error has occurred.  
HEATER ERROR – Occurs when the controller does not detect a temperature rise in six (6) minutes.  
HIGH TEMP – Occurs when the controller senses a temperature of 465˚ F (241˚ C).  
CHECK REED SWITCH / USE FLAT COOK – One or more of the Reed Switches are out of adjustment. User will only be  
able to cook FLAT menu items.  
ERROR COMMS - A communications error has occured between the Motor Speed Control and the Main Control.  
CHECK PLATEN LEVEL – Occurs if the calibration difference between the front and rear is greater than the minimum  
allowance, but less than the maximum allowance. Product Recognition (Auto) is DISABLED.  
PLATEN NOT LEVEL* – Occurs if the calibration difference between the front and rear is greater than maximum  
allowance. Product Recognition (Auto) and manual cooking is DISABLED. Flat Menu cooking is ONLY allowed.  
* Platen Auto-Calibrate  
2. PRESS the button.NOwill flash on the display.  
PRESS the button to change it toYES.”  
If CHECK PLATEN LEVEL is displayed, perform the  
following steps:  
3. PRESS the button. The platen will immediately lower  
and reset its internal measurements. Upon completion,  
the platen will rise. If the error message does not return  
continue operating normally. If the error message  
1. PRESS AND HOLD the and buttons for 3 seconds.  
The control will display AUTO GAP FORCE.  
persists, l
call your local authorized service agent.  
Page 14  
PART #4521777 (03/19/08)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GARLAND ELECTRIC CLAMSHELL GRILL WITH PRODUCT RECOGNITION MODEL MWE3W  
INSTALLATION/OPERATION MANUAL  
OPERATING PROCEDURES  
Upon reaching the AM or PM set temperature (whichever  
is selected), the grill will stabilize in temperature for fifteen  
(15) minutes. Once this time has elapsed, the grill will  
autocalibrate. Upon completion of autocalibration, the  
upper platens will raise to there normal position, and the  
PRC will displayREADY.  
General Overview:  
The PRC grill control will allow for 2 functions, both  
described in detail in the following sections  
The “Normal Operating Mode”, also known as the Cook  
Mode is the mode used during normal cooking. In the  
normal operating mode, the operator can start a cook  
cycle, cancel a cook cycle, view actual temperatures, scroll  
to another menu item, and enter the Programming Mode.  
To Select a Menu item:  
Scroll forward through the list of available menu items by  
pressing repeatedly. Scroll backward through the list of  
available menu items by pressing repeatedly.  
The “Programming Mode” is the mode in which the  
operator can program the controller’s various settings. To  
enter the programming mode, PRESS and HOLD  
Menu Item Library  
There are currently 3 methods of cooking that can be  
utilized with the MWE3 Garland clamshell:  
The menu item library is loaded in the computer based  
upon the setting programmed in [CONFIGURE]->[GRILL  
REGION]. Each menu item consists of a function called  
[DISPLAY ACTIVE]. The settings in this function (AM, PM,  
AM/PM, No) determine what menu items are displayed  
when the button is pressed.  
Standard Cooking – This is the cook method that utilizes a  
single gap setting for each menu item. The timer will count  
down according to the selected menu item.  
Multi Stage Cooking – This method of cooking utilizes 2  
different gap settings during the cook cycle. The timer will  
count down according to the selected menu item.  
Menu  
Item #  
Display Active  
– Default  
Menu Item  
1
10:1 - CLAM  
4:1 - CLAM  
PM  
PM  
2
Product Recognition – The product recognition method  
of cooking uses the magnetic switches mounted on the  
upper platen arm assembly to determine the product  
being cooked. Using the PR feature, the operator simply  
selects the button on the controller. This will allow  
the controller to know what product group to select  
from. When a cook cycle is initiated, the platen will come  
down and recognize the product being cooked. The  
cook timer will count down according to the time set for  
the recognized item. For more information on product  
Recognition, see the next section;Product Recognition.”  
3
STRIP BACON - CLAM  
SAUSAGE CLAM FZN  
MCRIB - CLAM  
AM/PM  
AM  
NO  
4
5
6
STEAK - CLAM  
AM/PM  
PM  
7
GRILLED CHICKEN - FLAT  
FOLDED EGGS FLAT  
ROUND EGGS - FLAT  
CHICKEN FLAT BRD - FLAT  
10:1 FLAT  
8
AM  
AM  
NO  
9
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
25  
26  
NO  
4:1 - FLAT  
NO  
To turn the grill on:  
MCRIB - FLAT  
NO  
The Main Power Switch – Controls power to the grill  
and must be turned ON to start operation. The controller  
displays will be active. Upon successful power up checks,  
the controllers will displaysOFF.  
SAUSAGE FLAT FZN  
HOTCAKES - FLAT  
OPT MENU 1 - CLAM  
OPT MENU 2 - CLAM  
OPT MENU 3 - CLAM  
OPT MENU 4 - CLAM  
OPT MENU 5 - CLAM  
OPT MENU 6 - CLAM  
OPT MENU 7 - CLAM  
OPT MENU 1 - FLAT  
OPT MENU 2 - FLAT  
OPT MENU 3 - FLAT  
OPT MENU 4 - FLAT  
NO  
NO  
NO  
NO  
AM Operation – Teflon Sheets MUST be ON at this time  
and the grill surface should be free and clear of carbon.  
NO  
NO  
NO  
Once the PRC displaysOFFpress . The PRC will go to  
PREHEAT mode and default to AM preheat temperatures.  
NO  
To preheat to PM temperatures, press  
.
NO  
AM PREHEAT  
PM PREHEAT  
NO  
NO  
375˚F (190˚C) Upper Platen 425˚F (218˚C) Upper Platen  
NO  
275˚F (135˚C) Grill  
350˚F (177˚C) Grill  
NO  
PART #4521777 (03/19/08)  
Page 15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATION/OPERATION MANUAL  
GARLAND ELECTRIC CLAMSHELL GRILL WITH PRODUCT RECOGNITION MODEL MWE3W  
OPERATING PROCEDURES (continued)  
Indicator Lights  
Cooking Procedures in MANUAL MODE  
There are four (4) indicator lights on the main control.  
The LED lights indicate the temperature status of each  
zone. There are two (4) zones per section of the grill, TOP,  
(platen), BACK GRILL, MIDDLE GRILL, and FRONT GRILL.  
Breakfast  
1. Select AM mode using the button.  
2. Select Manual mode using the button.  
RED – The zone(s) isTOO HOT(more than 79˚F/43˚C over  
set temperature) OR a heat zone failure has occurred.  
3. Select a product from the AM product library using the  
or arrow buttons.  
AMBER – The zone(s) is calling for heat.  
4. Following McDonalds procedures for the item selected,  
load product on the grill.  
GREEN – The zone(s) is at or above set temperature, but  
below 79˚F/43˚C over set temperature.  
5. Press the GREEN pushbutton to initiate a cook cycle.  
6. Alarm will sound when the cook cycle is complete.  
Standby Mode  
To enter the standby mode:  
7. Remove product and clean grill to prepare for the next  
cook cycle.  
1. Press the button. The upper platen will lower, and  
the grill will maintain a set temperature of Upper platen  
- 425˚ F (218˚C), Grill Surface - 350˚ F (177˚C).  
Lunch  
Note: Switching from Breakfast to Lunch menu items  
will take approximately 10 minutes to heat to the  
appropriate temperatures.  
To Exit the Standby Mode:  
1. Press the GREEN PUSHBUTTON. The upper platen  
will raise.  
1. Select PM mode using the button.  
To display the current temperatures:  
2. Select Manual mode using the button.  
1. Press the button and repeat for each zone to be  
displayed:  
3. Select a product from the PM product library using the  
or arrow buttons.  
1st key press – Front Set Point  
2nd key press – Front Actual  
3rd key press – Mid Set Point  
4th key press – Mid Actual  
5th key press – Back Set Point  
6th key press – Back Actual  
7th key press – Platen Set Point  
8th key press – Platen Actual  
4. Following the below lay pattern, load product on the  
grill.  
5. Press the GREEN pushbutton to initiate a cook cycle.  
6. Alarm will sound when the cook cycle is complete  
7. Remove product and clean grill to prepare for next  
cook cycle.  
To Change The Cook Time for a Menu Item  
1. Select AM or PM mode using the button.  
2. Select Manual mode using the button.  
2. Pressing and holding the button for five (5) seconds  
will display all of the current temperatures at once.  
3. Select a product using the or arrow buttons.  
4. PRESS the button to display the cook time.  
5. Use the and buttons to change the cook time.  
T ###  
F ###  
B ###  
M ###  
6. The control will automatically default back to the  
normal operating mode after 3 seconds.  
Page 16  
PART #4521777 (03/19/08)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GARLAND ELECTRIC CLAMSHELL GRILL WITH PRODUCT RECOGNITION MODEL MWE3W  
INSTALLATION/OPERATION MANUAL  
OPERATING PROCEDURES (continued)  
AUTO MODE (PRODUCT RECOGNITION)  
Lunch  
Note: Switching from Breakfast to Lunch menu items  
will take approximately 10 minutes to heat to the  
appropriate temperatures.  
Breakfast  
1. Select AM mode using the button.  
2. Select Auto mode using the button. The control will  
displayAM / AUTOMATIC”  
1. Select PM mode using the button.  
2. Select Auto mode using the button. The control  
will displayPM / AUTOMATIC.”  
3. Following McDonalds procedures for the item selected,  
load product on the grill.  
3. Following the lay patterns shown on the Patty  
Placement Guide insert, load product on  
the grill.  
4. Press the GREEN pushbutton to initiate a cook cycle.  
The platen will lower, and recognize the product that  
has been loaded on the grill.  
4. Press the GREEN pushbutton to initiate a cook cycle.  
The platen will lower, and recognize the product that  
has been loaded on the grill.  
5. Alarm will sound when the cook cycle is complete.  
6. Remove product and clean grill to prepare for the next  
cook cycle.  
5. Alarm will sound when the cook cycle is complete  
6. Remove product and clean grill to prepare for next  
cook cycle.  
PRODUCT RECOGNITION  
This Garland Clamshell grill is equipped with Product Recognition Controls (PRC). This new technology allows the user to  
simply start a cook cycle WITHOUT having to select a specific menu item. The PRC will recognize the product thickness  
by utilizing switches inside the upper platen and the magnets mounted on the platen arms. Once the PRC calculates  
the thickness of the product that’s been loaded, it will look up product from the product range library (below), and  
automatically select that product.  
MENU ITEM  
MIN GAP  
MAX GAP  
MENU ITEM  
MIN GAP  
MAX GAP  
Breakfast Library Recommended Ranges  
Lunch Library Recommended Ranges  
Strip Bacon  
Sausage Clam  
Steak Clam  
.010  
.210  
.430  
.159  
.405  
.480  
10:1 Clam  
4:1 Clam  
.160  
.355  
.001  
.561  
.345  
.560  
.130  
.880  
Strip Bacon  
Angus 3:1  
PART #4521777 (03/19/08)  
Page 17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATION/OPERATION MANUAL  
GARLAND ELECTRIC CLAMSHELL GRILL WITH PRODUCT RECOGNITION MODEL MWE3W  
PROGRAM LOGIC  
Press & Hold  
(3 seconds)  
Menu Item Displayed  
RIGHT or LEFT arrow buttons  
Scroll Menu Items  
Scroll  
Forward  
Product  
Library  
Scroll  
Backward  
Select Menu Item  
FLAT MENU ITEMS  
CLAM MENU ITEMS  
Product  
Product  
Display Active  
Grill Set Point  
Platen Set Point  
Instant On Time  
Remove In Time  
Alarm  
Scroll  
Forward  
Scroll  
Forward  
Display Active  
Grill Set Point  
Platen Set Point  
Instant On Time  
Remove In Time  
Multi Stage 1 Time  
Multi Stage 2 Time  
Multi Stage 3 Time  
PR Stage 1 Time  
PR Stage 2 Time  
PR Stage 3 Time  
Alarm  
Flip Time  
Flip Alarm  
Sear Time  
Sear Alarm  
Must Remove Time  
Toast Buns Time  
Toast Buns Alarm  
Gap Setting  
Gap Mul/PR Start  
Gap Multi Stage 1  
Gap Multi Stage 2  
Gap Multi Stage 3  
Gap PR Stage 1  
Gap PR Stage 2  
Gap PR Stage 3  
Must Remove Time  
Toast Buns Time  
Toast Buns Alarm  
Scroll  
Backward  
Scroll  
Backward  
Page 18  
PART #4521777 (03/19/08)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GARLAND ELECTRIC CLAMSHELL GRILL WITH PRODUCT RECOGNITION MODEL MWE3W  
INSTALLATION/OPERATION MANUAL  
CONTROL PROGRAMMING  
Programming Modes; System Setup  
6. PRESS the button. The current time unit will flash.  
To Change the Temperature Display Units  
(Fahrenheit / Celcius)  
7. PRESS the OR arrow buttons to change the  
flashing time unit.  
For a complete listing of setup functions and their  
options, see page 25.  
The temperature display units (F or C) will change  
the way a temperature is displayed on the controller  
(F – Fahrenheit, C – Celcius)  
8. PRESS the button to save the new setting  
9. PRESS THE 2X to exit the program mode.  
To change the Key Chirp (Yes / No)  
1. With the controller display ON and either displaying  
the current menu item or displayingOFF, PRESS and  
HOLD the button for approximately 3 seconds.  
Controller will display previously selected menu item  
and its corresponding item number ORStandby /  
Menu Item.  
Changing the Key Chirp On or Off will either turn on or off  
the sound of the controller when a button is pressed.  
1. With the controller display ON and either displaying  
the current menu item or displayingOFF, PRESS and  
HOLD the button for approximately 3 seconds.  
Controller will display previously selected menu item  
and its corresponding item number ORStandby /  
Menu Item.  
2. PRESS the AND arrow buttons TOGETHER.  
“CONFIGUREwill appear in the display.  
3. PRESS the arrow button.Setupwill appear in the  
display  
4. PRESS the button.Temperature Unitwill appear in  
the display.  
2. PRESS the AND arrow buttons TOGETHER.  
“CONFIGUREwill appear in the display.  
5. PRESS the button. The currently set temperature  
unit will flash.  
3. PRESS the arrow button.Setupwill appear in the  
display  
6. PRESS the OR arrow buttons to change the  
flashing temperature unit.  
4. PRESS the button.Temperature Unitwill appear in  
the display.  
7. PRESS the button to save the new setting.  
8. PRESS THE 2X to exit the program mode.  
To Change the Time Display Units  
5. PRESS the repeatedly untilKey Chirpappears in the  
display.  
6. PRESS the button. The currently set Key Chirp will  
flash.  
Changing the Time Display Units will change the way  
timing cycles are displayed on the controller.  
7. PRESS the OR arrow buttons to change the  
flashingYESorNO”  
1. With the controller display ON and either displaying  
the current menu item or displayingOFF, PRESS and  
HOLD the button for approximately 3 seconds.  
Controller will display previously selected menu item  
and its corresponding item number ORStandby /  
Menu Item.  
8. PRESS the button to save the new setting.  
9. PRESS THE 2X to exit the program mode.  
To change the Audible  
Changing the Audible Sound will change the way the  
controller sounds when a timing cycle has completed its  
countdown.  
2. PRESS the AND arrow buttons TOGETHER.  
“CONFIGUREwill appear in the display.  
3. PRESS the arrow button.Setupwill appear in the  
display.  
1. With the controller display ON and either displaying  
the current menu item or displayingOFF, PRESS and  
HOLD the button for approximately 3 seconds.  
Controller will display previously selected menu item  
and its corresponding item number ORStandby /  
Menu Item.  
4. PRESS the button.Temperature Unitwill appear in  
the display.  
5. PRESS the 1X.“Time Unitwill appear in the display.  
PART #4521777 (03/19/08)  
Page 19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATION/OPERATION MANUAL  
GARLAND ELECTRIC CLAMSHELL GRILL WITH PRODUCT RECOGNITION MODEL MWE3W  
CONTROL PROGRAMMING (continued)  
To activate / deactivate a menu item in the Normal  
Operating mode library, or change its day-part  
(Defaults are listed on page 15 underMenu Item Library.’)  
2. PRESS the AND arrow buttons TOGETHER.  
“CONFIGUREwill appear in the display.  
3. PRESS the arrow button.Setupwill appear in the  
display  
1. PRESS and HOLD the button for approximately 3  
seconds. Controller will display previously selected  
menu item and its corresponding item number.  
4. PRESS the button.Temperature Unitwill appear in  
the display.  
2. Using the or arrow buttons, select the menu item  
that requires activation / deactivation.  
5. PRESS the repeatedly untilAudibleappears in the  
display.  
3. PRESS the button. The controller will display  
“Product. The menu item will flash.  
6. PRESS the button. The currently set Audible will  
flash.  
4. PRESS the or arrow buttons untilDisplay Active”  
is displayed on the controller.  
7. PRESS the OR arrow buttons to change the  
flashing audible options.  
5. PRESS the button. The current setting will flash.  
6. PRESS the or button to select a different setting.  
7. PRESS the button to save the new setting.  
For a complete listing of setup functions and their  
options, see page 25.  
8. PRESS the button to save the current setting.  
9. PRESS THE 2X to exit the program mode.  
8. PRESS the 2X to exit and return to normal operating  
mode.  
Programming Modes; Menu Items  
To change the grill surface set point temperature  
To change the name of an existing menu item  
NOTE: Grill temperature set points are preset in the controller to the  
currently required standard. You should not change this set point to any  
temperature other than what is shown on page 24.  
1. Using the or button, select the menu item that  
requires a name change.  
2. PRESS and HOLD the button for approximately 3  
seconds. Controller will display previously selected  
menu item and its corresponding item number.  
1. Using the or arrow buttons, select the menu item  
that requires a temperature change.  
2. PRESS and HOLD the button for approximately 3  
seconds. Controller will display previously selected  
menu item and its corresponding item number.  
3. PRESS and HOLD the button.  
4. To spell out the product name:  
3. PRESS the button. The controller will display  
“Product.  
a. Use the or arrow buttons to scroll through  
the character library.  
4. PRESS the or arrow buttons untilGrill SetPtis  
displayed on the controller.  
Character Library:  
space ! “ # $ % & ‘ ( ) * + , - . / 0 1 2 3 4 5 6 7 8 9 : ; < = > ? @ A B C D E F G H  
I J K L M N O P Q R S T U V W X Y Z [ \ ] ^ _ ` a b c d e f g h i j k l m n o p q r  
s t u v w x y z  
5. PRESS the button. The current grill set temperature  
will begin to flash.  
b. PRESS  
or to scroll right or left.  
c. PRESS the  
name.  
button to save the new menu item  
6. Using the or button, change the temperature set  
point to the new desired temperature.  
5. PRESS the 2X to exit and return to normal operating  
mode.  
7. PRESS the button to save the new temperature set  
point.  
8. PRESS the 2X to exit and return to normal operating  
mode.  
Page 20  
PART #4521777 (03/19/08)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GARLAND ELECTRIC CLAMSHELL GRILL WITH PRODUCT RECOGNITION MODEL MWE3W  
INSTALLATION/OPERATION MANUAL  
CONTROL PROGRAMMING (continued)  
To change the grill upper platen set point temperature  
To Change the Toast Buns time  
NOTE: Grill temperature set points are preset in the controller to the  
currently required standard. You should not change this set point to any  
1. Using the or button, select the menu item that  
requires a cook time change.  
temperature other than what is shown on page 24.  
2. PRESS and HOLD the button for approximately 3  
seconds. Controller will display previously selected  
menu item and its corresponding item number.  
1. Using the or button, select the menu item that  
requires a temperature change.  
2. PRESS and HOLD the button for approximately 3  
seconds. Controller will display previously selected  
menu item and its corresponding item number.  
3. PRESS the button. The controller will display  
“Product.  
4. PRESS the or button untilToast Buns Timeis  
displayed on the controller.  
3. PRESS the button. The controller will display  
“Product.  
5. PRESS the button. The seconds will begin to flash.  
4. PRESS the or button untilPlaten SetPtis  
displayed on the controller.  
6. Using the or button, change the Toast Buns Time  
to the new desired time.  
5. PRESS the button. ThePLATEN SET POINTwill  
begin to flash.  
7. PRESS the button to save the new time.  
6. Using the or button, change the temperature set  
point to the new desired temperature.  
8. PRESS the 2X to exit and return to normal operating  
mode.  
7. PRESS the button to save the new temperature.  
8. PRESS the 2X to return to normal operating mode.  
To Change the MUST REMOVE IN time  
To Change the Toast Buns Alarm (Auto / Manual)  
1. Using the or arrow buttons, select the menu item  
that requires a cook time change.  
2. PRESS and HOLD the button for approximately 3  
seconds. Controller will display previously selected  
menu item and its corresponding item number.  
1. Using the or button, select the menu item that  
requires a cook time change.  
2. PRESS and HOLD the button for approximately 3  
seconds. Controller will display previously selected  
menu item and its corresponding item number.  
3. PRESS the button. The controller will display  
“Product.  
4. PRESS the or button untilToast Buns Alarmis  
displayed on the controller.  
3. PRESS the button. The controller will display  
“Product.  
5. PRESS the button. TheAUTOorMANUALwill  
begin to flash.  
4. PRESS the or button untilMust Remove Inis  
displayed on the controller.  
6. Using the or arrow buttons to change the  
“MANUALtoAUTOorAUTOtoMANUAL”.  
5. PRESS the button. The seconds will begin to flash.  
6. Using the or arrow buttons to change the Must  
Remove In time to the new desired time.  
7. PRESS the button to save the new setting.  
8. PRESS the 2X to exit and return to normal operating  
mode.  
7. PRESS the button to save the new time.  
8. PRESS the 2X to return to normal operating mode.  
PART #4521777 (03/19/08)  
Page 21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATION/OPERATION MANUAL  
GARLAND ELECTRIC CLAMSHELL GRILL WITH PRODUCT RECOGNITION MODEL MWE3W  
CONTROL PROGRAMMING (continued)  
To Add NEW Menu Items  
10. PRESS the button. “GRILL SETPTwill be displayed.  
The following programming instructions serves as a GUIDE for  
programming the basic settings for CLAM menu items.  
11. PRESS the button. The temperature will begin to  
flash.  
1. PRESS and HOLD the button for approximately 3  
seconds. Controller will display previously selected  
menu item and its corresponding item number.  
12. Using the or button, change the temperature set  
point to the new desired temperature.  
13. PRESS the button to save the new temperature set  
point.  
2. PRESS the or button untilOpt menu # - CLAMis  
displayed on the controller.  
14. PRESS the button. “PLATSETPTwill be displayed.  
3. PRESS the button. The controller will display  
“PRODUCT”  
15. PRESS the button. The temperature will begin to  
flash.  
4. PRESS and HOLD the button. The currently select  
menu item name will begin to flash.  
16. Using the or button, change the temperature set  
point to the new desired temperature.  
5. To spell out the product name:  
17. PRESS the button to save the new temperature set  
point.  
a. Use the or arrow buttons to scroll through  
the character library.  
b. PRESS  
or to scroll right or left.  
18. PRESS the button untilGAP MULTI/PR START”  
appears in the display.  
c. PRESS the  
name.  
button to save the new menu item  
19. PRESS the button. The gap setting will begin to  
flash.  
6. PRESS the button. “Display Activewill be displayed.  
7. PRESS the button. “NOwill begin to flash.  
8. PRESS the button. “NOwill change toYES.  
9. PRESS the button to save the new setting.  
20. Using the and DOWN button, change the gap  
setting to the desired setting.  
21. PRESS the button to save the new gap setting.  
22. PRESS the button 2X to exit and return to the normal  
operating mode.  
Page 22  
PART #4521777 (03/19/08)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GARLAND ELECTRIC CLAMSHELL GRILL WITH PRODUCT RECOGNITION MODEL MWE3W  
INSTALLATION/OPERATION MANUAL  
PROBE CALIBRATION  
7. PRESS the button to lock the calibrated temperature  
into the controller.  
Monthly Calibration of Grill Temperature Zones  
Tools: Digital Pyrometer with Surface Probe  
8. Press the or button to select the next heat zone.  
Warning: PERSONAL INJURY FROM BURNS MAY RESULT  
WHEN COMING IN CONTACT WITH HOT COOKING  
SURFACES.  
9. Move the pyrometer’s surface probe to the newly  
selected heat zone and repeat steps 5, 6, and 7.  
10. Repeat the procedure for each of the heat zones.  
NOTE: Calibration of grills is done with release material  
sheetsOFF.  
11. Continue to cycle through each heat zone repeating  
the sequence until all temperatures are within 1°.  
PLEASE FOLLOW THESE INSTRUCTIONS EXACTLY  
AS THEY APPEAR BELOW:  
12. Exit the program mode by pressing the button 2x.  
The controller will return to its previous state in the  
Normal Operating Mode.  
1. The upper platens and lower grill plate should be at  
operating temperatures to perform this calibration  
procedure. Press the or button to select a  
“CLAMoperation and allow the grill to reach the set  
temperature and stabilize, (approximately 30 minutes).  
THERMOCOUPLE LOCATIONS  
11.500  
2. PRESS and HOLD the button for approximately  
3 seconds, or until the controller will displays:  
“PROBE CAL”.  
[292mm]  
PLATEN THERMOCOUPLE  
LOCATIONS (VIEW FROM BOTTOM)  
5.750  
[146mm]  
3. PRESS the button to display the first temperature  
zone to be calibrated. The first zone to be calibrated is  
“FRONT TEMP CAL”. The zones are displayed in order of  
FRONT TEMP CAL, MIDDLE TEMP CAL, BACK TEMP CAL,  
TOP TEMP CAL.  
MWE3W: The electric grill’s thermocouple probes are  
located front to rear, as shown in the diagram to the  
right. Each upper platen has one thermocouple in the  
center.  
36.000  
MWG3W: The gas grill’s thermocouple probes are  
located in the center of each lane, as shown in the  
diagram to the right. Each upper platen has one  
thermocouple in the center.  
[914mm]  
18.000  
[457mm]  
4. Select a heat zone display using the or buttons.  
5. Allow at least 5 seconds for the pyrometer to respond  
and stabilize. Note the temperature on the pyrometer.  
6. If the temperature on the grill control display does not  
match the temperature on the pyrometer, adjust the  
temperature on the grill control accordingly. The  
button will increase the displayed temperature in one,  
(1) degree increments. The button will decrease the  
displayed temperature in one, (1), degree Increments.  
FRONT  
OF GRILL  
6.110  
6.110  
[155mm]  
[155mm]  
NOTE: During step 6, the control should be sounding  
a high-pitched tone. The temperature can only be  
adjusted if this tone is sounding. If the control is silent,  
the temperature will not change.  
PART #4521777 (03/19/08)  
Page 23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATION/OPERATION MANUAL  
GARLAND ELECTRIC CLAMSHELL GRILL WITH PRODUCT RECOGNITION MODEL MWE3W  
MENU ITEMS  
Clam Menu  
TOAST  
MULTI  
STAGE  
TIME  
PR  
STAGE  
TIME  
ALARM -  
AUTO /  
MANUAL  
GAP  
MULTI/PR  
START  
GAP  
MULTI  
STAGE  
MUST  
REMOVE IN BUNS IN  
TOAST  
BUNS  
ALARM -  
AUTO /  
Menu  
Item #  
DISPLAY  
ACTIVE  
GRILL SET  
POINT  
PLATEN  
SET POINT ON TIME  
INSTANT REMOVE  
GAP  
SETTING  
GAP PR  
STAGE  
PRODUCT  
IN TIME  
TIME  
0
TIME  
MANUAL  
S1  
S2  
5
0
5
0
S1  
S2  
.265  
0
.265  
0
350F  
(177C)  
425F  
0
10:1 - CLAM  
PM  
38  
AUTO  
.255  
.245  
1
0
AUTO  
(217C)  
S3  
S1  
S2  
S3  
S1  
S2  
S3  
S1  
S2  
S3  
S1  
S2  
S3  
S1  
S2  
S3  
S1  
S2  
S3  
0
0
S3  
S1  
S2  
S3  
S1  
S2  
S3  
S1  
S2  
S3  
S1  
S2  
S3  
S1  
S2  
S3  
S1  
S2  
S3  
0
.425  
---  
---  
---  
---  
---  
---  
---  
---  
---  
---  
---  
---  
---  
---  
---  
---  
---  
0
.425  
---  
---  
---  
10  
---  
---  
---  
---  
---  
---  
---  
---  
---  
---  
---  
---  
---  
---  
---  
---  
---  
10  
---  
---  
---  
---  
---  
---  
---  
---  
---  
---  
---  
---  
---  
---  
---  
---  
---  
350F  
(177C)  
425F  
0
4:1 - CLAM  
STRIP BACON-CLAM  
SAUSAGE CLAM FZN  
MCRIB - CLAM  
PM  
AM/PM  
AM  
107  
23  
AUTO  
AUTO  
AUTO  
AUTO  
AUTO  
AUTO  
.415  
.089  
.350  
.530  
.415  
0
.400  
.089  
.350  
.530  
.415  
0
2
3
4
5
6
0
0
0
0
0
0
0
0
0
0
0
0
AUTO  
AUTO  
AUTO  
AUTO  
AUTO  
AUTO  
(217C)  
350F  
(177C)  
425F  
0
---  
---  
---  
(217C)  
350F  
(177C)  
425F  
0
82  
---  
---  
---  
(217C)  
350F  
(177C)  
425F  
0
NO  
163  
104  
---  
---  
---  
(217C)  
350F  
(177C)  
425F  
0
STEAK-CLAM  
AM/PM  
NO  
---  
---  
---  
(217C)  
16  
through  
22  
OPT MENU 1 through 7  
CLAM  
0F  
(0C)  
0F  
(0C)  
0
---  
---  
Flat Menu  
TOAST  
BUNS  
ALARM -  
AUTO /  
MANUAL  
SEAR  
ALARM -  
AUTO /  
ALARM -  
AUTO /  
MANUAL  
FLIP ALARM  
- AUTO /  
MANUAL  
MUST  
REMOVE IN  
TIME  
DISPLAY  
ACTIVE  
GRILL SET  
POINT  
PLATEN INSTANT ON REMOVE IN  
TOAST  
BUNS TIME  
ITEM  
FLIP TIME SEAR TIME  
SET POINT  
TIME  
TIME  
MANUAL  
350F  
(177C)  
425F  
(217C)  
7
GRILL CHICK-FLAT  
FOLDED EGGS-FLAT  
ROUND EGGS-FLAT  
CHICK F BRD-FLAT  
10:1- FLAT  
PM  
AM  
---  
---  
---  
---  
---  
---  
---  
---  
---  
---  
410  
120  
150  
100  
125  
270  
390  
140  
---  
195  
---  
---  
---  
---  
---  
20  
20  
---  
---  
---  
---  
---  
---  
---  
---  
---  
---  
---  
---  
---  
---  
---  
MANUAL  
---  
---  
---  
---  
---  
---  
---  
---  
---  
---  
---  
---  
---  
---  
---  
---  
---  
---  
---  
---  
---  
---  
---  
---  
---  
---  
---  
---  
---  
---  
---  
265  
(130C)  
8
OFF  
OFF  
---  
265  
(130C)  
9
AM  
---  
---  
---  
350F  
(177C)  
425F  
(217C)  
10  
11  
12  
13  
15  
NONE  
NONE  
NONE  
NONE  
NONE  
NONE  
AM/PM  
---  
---  
340  
(171C)  
425F  
(217C)  
75  
150  
270  
90  
MANUAL  
AUTO  
AUTO  
AUTO  
AUTO  
---  
365  
(185C)  
425F  
(217C)  
4:1-FLAT  
---  
---  
---  
---  
---  
365  
(185C)  
425F  
(217C)  
McRIB-FLAT  
365  
(185C)  
425F  
(217C)  
HOTCAKES-FLAT  
23  
through  
26  
OPT MENU 1 through 4 -  
FLAT  
---  
---  
---  
325F  
(163C)  
325F  
(163C)  
CLEAN MODE  
---  
---  
---  
Page 24  
PART #4521777 (03/19/08)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GARLAND ELECTRIC CLAMSHELL GRILL WITH PRODUCT RECOGNITION MODEL MWE3W  
INSTALLATION/OPERATION MANUAL  
PROGRAMMING - SYSTEM FUNCTION OPTIONS  
System Menu  
Configure Menu  
Sub Menu  
Options  
Description  
Grill Type  
Electric  
Sets the controller to the correct grill type  
Gas  
Platen Enabled  
Grill Region  
Yes  
Enabled to NO if no upper platen exists.  
Sets the programming based on Region  
No  
World  
Japan  
Heat Error Time  
Cook Zone  
60 - 1200 (Adjustable)  
Left  
Center  
Right  
Sets where the controller resides in the panel.  
Setup  
Temperature Units  
Time Unit  
F (Fahrenheit)  
Changes the temperature display units  
C (Celcius)  
sss  
mss  
Changes the Time Unit display during countdown  
mmm  
Key Chirp  
Audible  
Yes  
Determines whether or not a chirp is heard a  
button is depressed  
No  
3 Second  
Sets the audible sound from the controller at the  
completion of a cook cycle.  
Strobe  
Song  
Audio Volume  
1-100 (Adjustable)  
Changes the alarm volume  
Reload Defaults  
Yes  
Reloads the defaults of the computer  
No  
Multi Gap  
Yes  
Determines whether Multi-Stage cooking is  
enabled or disabled during cooking  
No  
Audible Select  
0
1
Changes the audible pitch on the controller  
2
Auto Mode Enable  
Remove Alarm DFT  
Yes  
No  
0 - 99 (Adjustable)  
Calibration  
Level / Reed Switch  
Auto Gap Force  
Yes  
Function where technician levels upper platen,  
and performs a reed switch calibration  
No  
Yes  
Function to perform a manual Auto Calibration  
No  
Probe Cal  
All Temperature Zones  
RANGE  
Function to perform Probe Calibration  
Offsets the gap  
Gap Calibration  
Minimum allowance between front and rear reed  
switch  
Reed Switch Min  
Reed Switch Max  
Range  
Range  
Maximum allowance between front and rear  
reed switch  
PART #4521777 (03/19/08)  
Page 25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATION/OPERATION MANUAL  
GARLAND ELECTRIC CLAMSHELL GRILL WITH PRODUCT RECOGNITION MODEL MWE3W  
TEMPERATURE CONVERSION  
°C  
27  
27  
28  
28  
29  
30  
30  
31  
31  
32  
32  
33  
33  
34  
34  
35  
36  
36  
37  
37  
38  
38  
39  
40  
40  
41  
41  
42  
42  
43  
43  
44  
44  
45  
45  
46  
46  
47  
48  
48  
49  
49  
50  
50  
51  
52  
52  
53  
°F  
80  
°C  
54  
54  
55  
55  
56  
56  
57  
57  
58  
59  
59  
60  
60  
61  
61  
62  
62  
63  
63  
64  
64  
65  
65  
66  
66  
67  
68  
68  
69  
70  
70  
71  
71  
72  
72  
73  
74  
74  
75  
75  
76  
76  
77  
77  
78  
78  
79  
79  
°F  
°C  
80  
°F  
°C  
°F  
°C  
°F  
128  
129  
130  
131  
132  
133  
134  
135  
136  
137  
138  
139  
140  
141  
142  
143  
144  
145  
146  
147  
148  
149  
150  
151  
152  
153  
154  
155  
156  
157  
158  
159  
160  
161  
162  
163  
164  
165  
166  
167  
168  
169  
170  
171  
172  
173  
174  
175  
176  
177  
178  
179  
180  
181  
182  
183  
184  
185  
186  
187  
188  
189  
190  
191  
192  
193  
194  
195  
196  
197  
198  
199  
200  
201  
202  
203  
204  
205  
206  
207  
208  
209  
210  
211  
212  
213  
214  
215  
216  
217  
218  
219  
220  
221  
222  
223  
107  
107  
108  
108  
109  
110  
110  
111  
111  
112  
112  
113  
114  
114  
115  
115  
116  
116  
117  
117  
118  
119  
119  
120  
120  
121  
121  
122  
122  
123  
124  
124  
125  
125  
126  
126  
127  
127  
128  
128  
129  
130  
130  
130  
131  
131  
132  
133  
224  
225  
226  
227  
228  
229  
230  
231  
232  
233  
234  
235  
236  
237  
238  
239  
240  
241  
242  
243  
244  
245  
246  
247  
248  
249  
250  
251  
252  
253  
254  
255  
256  
257  
258  
259  
260  
261  
262  
263  
264  
265  
266  
267  
268  
269  
270  
271  
134  
134  
134  
135  
135  
136  
137  
137  
138  
138  
139  
139  
140  
141  
141  
142  
142  
143  
143  
144  
144  
145  
146  
146  
147  
147  
148  
148  
149  
149  
150  
151  
151  
152  
152  
153  
153  
154  
154  
155  
156  
156  
157  
157  
158  
158  
159  
159  
272  
273  
274  
275  
276  
277  
278  
279  
280  
281  
282  
283  
284  
285  
286  
287  
288  
289  
290  
291  
292  
293  
294  
295  
296  
297  
298  
299  
300  
301  
302  
303  
304  
305  
306  
307  
308  
309  
310  
311  
312  
313  
314  
315  
316  
317  
318  
319  
81  
80  
82  
81  
83  
81  
84  
82  
85  
83  
86  
83  
87  
84  
88  
84  
89  
85  
90  
85  
91  
86  
92  
86  
93  
87  
94  
88  
95  
88  
96  
89  
97  
89  
98  
90  
99  
90  
100  
101  
102  
103  
104  
105  
106  
107  
108  
109  
110  
111  
112  
113  
114  
115  
116  
117  
118  
119  
120  
121  
122  
123  
124  
125  
126  
127  
91  
91  
92  
93  
94  
94  
94  
95  
95  
96  
97  
97  
98  
98  
99  
99  
100  
101  
101  
102  
102  
103  
103  
104  
105  
105  
106  
106  
Page 26  
PART #4521777 (03/19/08)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GARLAND ELECTRIC CLAMSHELL GRILL WITH PRODUCT RECOGNITION MODEL MWE3W  
INSTALLATION/OPERATION MANUAL  
TEMPERATURE CONVERSION  
°C  
°F  
°C  
°F  
°C  
°F  
°C  
°F  
°C  
°F  
160  
161  
161  
162  
162  
163  
163  
164  
164  
165  
166  
166  
167  
167  
168  
168  
169  
169  
170  
171  
171  
172  
172  
173  
173  
174  
174  
175  
176  
176  
177  
177  
178  
178  
179  
179  
180  
181  
181  
182  
182  
183  
183  
184  
184  
185  
186  
186  
320  
321  
322  
323  
324  
325  
326  
327  
328  
329  
330  
331  
332  
333  
334  
335  
336  
337  
338  
339  
340  
341  
342  
343  
344  
345  
346  
347  
348  
349  
350  
351  
352  
353  
354  
355  
356  
357  
358  
359  
360  
361  
362  
363  
364  
365  
366  
367  
187  
187  
188  
188  
189  
189  
190  
191  
191  
192  
192  
193  
193  
194  
194  
195  
196  
196  
197  
197  
198  
198  
199  
199  
200  
201  
201  
202  
202  
203  
203  
204  
204  
205  
206  
206  
207  
207  
208  
208  
209  
209  
210  
211  
211  
212  
212  
213  
368  
369  
370  
371  
372  
373  
374  
375  
376  
377  
378  
379  
380  
381  
382  
383  
384  
385  
386  
387  
388  
389  
390  
391  
392  
393  
394  
395  
396  
397  
398  
399  
400  
401  
402  
403  
404  
405  
406  
407  
408  
409  
410  
411  
412  
413  
414  
415  
213  
214  
214  
215  
216  
216  
217  
217  
218  
218  
219  
219  
220  
221  
221  
222  
222  
223  
223  
224  
224  
225  
226  
226  
227  
227  
228  
228  
229  
229  
230  
231  
231  
232  
232  
233  
233  
234  
234  
235  
236  
236  
237  
237  
238  
238  
239  
239  
416  
417  
418  
419  
420  
421  
422  
423  
424  
425  
426  
427  
428  
429  
430  
431  
432  
433  
434  
435  
436  
437  
438  
439  
440  
441  
442  
443  
444  
445  
446  
447  
448  
449  
450  
451  
452  
453  
454  
455  
456  
457  
458  
459  
460  
461  
462  
463  
240  
241  
241  
242  
242  
243  
243  
244  
244  
245  
246  
246  
247  
247  
248  
248  
249  
249  
250  
241  
241  
252  
252  
253  
253  
254  
254  
255  
256  
256  
257  
257  
258  
258  
259  
259  
260  
261  
261  
262  
262  
263  
263  
264  
264  
265  
266  
266  
464  
465  
466  
467  
468  
469  
470  
471  
472  
473  
474  
475  
476  
477  
478  
479  
480  
481  
482  
483  
484  
485  
486  
487  
488  
489  
490  
491  
492  
493  
494  
495  
496  
497  
498  
499  
500  
501  
502  
503  
504  
505  
506  
507  
508  
509  
510  
511  
267  
267  
268  
268  
269  
269  
270  
271  
271  
272  
272  
273  
273  
274  
274  
275  
276  
276  
277  
277  
278  
278  
279  
279  
280  
281  
281  
282  
282  
283  
283  
284  
284  
285  
285  
286  
287  
287  
288  
288  
289  
290  
290  
291  
291  
292  
292  
293  
512  
513  
514  
515  
516  
517  
518  
519  
520  
521  
522  
523  
524  
525  
526  
527  
528  
529  
530  
531  
532  
533  
534  
535  
536  
537  
538  
539  
540  
541  
542  
543  
544  
545  
546  
547  
548  
549  
550  
551  
552  
553  
554  
555  
556  
557  
558  
559  
PART #4521777 (03/19/08)  
Page 27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Eizo Computer Monitor M1700 User Manual
Elation Professional Network Card EWDMX User Manual
Exmark Lawn Aerator OCDWB01 User Manual
Fisher Price Car Seat J5933 H9499 L1907 M4794 User Manual
Frigidaire Washer Dryer FARE4044MW User Manual
FujiFilm Digital Camera 16215853 User Manual
GE Appliance Trim Kit ZPBS360 User Manual
GE Cooktop 164D3333P235 User Manual
Generac Portable Generator 005518 1 User Manual
Giant Water Pump P217 3100 User Manual