The telephone company may make changes in its communications facilities, equipment, operations
or procedures where such action is required in the operation of its business and not inconsistent
with FCC Rules and Regulations. If these changes are expected to affect the use or performance of
your telephone equipment, the telephone company must give you adequate notice, in writing, to
allow you to maintain uninterrupted service.
Telephone Jack Requirements
Wall plate
Voice Time/Day Stamp
Ringer ON/OFF
Flash
Installing the Phone
Caller ID (CID)
Model 25942 Series
5.8 GHz Cordless
Handset Answering
System
To use this phone, you need an RJ11C type modular telephone
jack, which might look like the one pictured here, installed in
your home. If you don’t have a modular jack, call your local
phone company to find out how to get one installed.
1. Make sure the answering system is ON.
1. Press the mute/menu button until ringer 41 on shows in the display.
1ON is the default.
Use the flash/answerer/call waiting button to activate custom calling services such as
call waiting, which are available through your local phone company.
IMPORTANT: In order to use this unit’s Caller ID features, you must
subscribe to either the standard Name/Number Caller ID Service or
Call Waiting Caller ID Service. To know who is calling while you are
on the phone, you must subscribe to Call Waiting Caller ID Service.
Installing the Handset Battery
2. Press flash/answerer/call waiting button on the handset to enter answerer remote
mode.
Modular
NOTE: You must connect the handset battery before use.
2. Use the CALLER ID-VOLUME (5or6) button or the touch-tone pad on the handset
to scroll to 1 on or 2 off.
TIP: Do not use the TALK/CALL BACK button to activate custom
calling services such as call waiting or you’ll hang up the phone.
telephone
line jack
CAUTION: To reduce the risk of fire or personal injury, use only
the Thomson Inc. approved Nickel-Cadmium (Ni-Cd) battery
model 5-2729 or Nickel-Metal Hydride (Ni-MH) battery model
5-2522, which are compatible with this unit.
Interference Information
3. Press key [8] to enter Time/Day set menu on handset.
4. To set Hour, key in [00]-[12].
3. Press mute/menu to save.
This unit receives and displays information transmitted by your local phone company.
This information can include the phone number, date, and time; or the name, phone
number, date, and time.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference; and (2) This device must accept any
interference received, including interference that may cause undesired operation.
Installation
Channel Button
NOTE: If you turn the ringer off, ringer off shows on the display.
While talking on the phone, it may be necessary for you to manually change the
channel to improve reception and reduce noise or static on the line. Press and release
the chan button to move to the next clear channel.
5. To set Minutes, key in [00]-[59].
Digital Security System
1. Locate battery and battery door which are packaged together inside a plastic bag
and are separate from the handset.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
6. To set AM/PM, press the CALLER ID-VOLUME (5or6) button.
7. Press #PAUSE/ringer button to confirm the setting.
Ringer Tone
Your cordless phone uses a digital security system to protect against false ringing,
unauthorized access, and charges to your phone line.
Caller ID name
You can choose from 3 ring tones.
User’s Guide
2. Locate the battery compartment on the back of the handset.
Exit
INSTALLATION NOTE: Some cordless telephones operate at
frequencies that may cause or receive interference with nearby
TVs, microwave ovens, and VCRs. To minimize or prevent such
interference, the base of the cordless telephone should not be
placed near or on top of a TV, microwave ovens, or VCR. If such
interference continues, move the cordless telephone farther away
from these appliances.
1. Press the mute/menu button until ringer tone 401 shows in the display.
01 is the default.
Speaker Volume
Caller ID phone number
Caller ID record number
Press the *EXIT/tone button to cancel any command you initiated.
3. Plug the battery pack cord into the jack inside the compartment. please register
shows in the display.
Use the speaker volume (- / +) buttons to adjust speaker volume on the base to a
comfortable level. L1 is the minimum speaker volume and L8 is the maximum.
2. Use the CALLER ID-VOLUME (5or6) button or the touch-tone pad on the handset
to select from 01 to 03.
Page
Privacy of Communications may not be ensured when using this product.
NOTE: To ensure proper battery installation, the connector is keyed
and can be inserted only one way.
This feature assists in locating a misplaced handset.
If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna (that is, the antenna for radio or television that is
“receiving” the interference).
• Reorient or relocate and increase the separation between the telecommunications equipment
and receiving antenna.
• Connect the telecommunications equipment into an outlet on a circuit different from that to
which the receiving antenna is connected.
If these measures do not eliminate the interference, please consult your dealer or an experienced
radio/television technician for additional suggestions. Also, the Federal Communications Commission
has prepared a helpful booklet, “How To Identify and Resolve Radio/TV Interference Problems.” This
booklet is available from the U.S. Government Printing Office, Washington, D.C. 20402. Please specify
stock number 004-000-00345-4 when ordering copies.
Recording the Outgoing Announcement
Time
Date
Caller status; NEW or REPT
3. Press mute/menu to save.
Press the page button on the base. The handset beeps continuously for about 2
minutes until you press the TALK/CALL BACK button on the handset or the page button
on the base.
For best results when recording, you should be about nine inches from the microphone,
and eliminate as much background noise as possible.
battery
pack
Tone/Pulse
Call Waiting Caller ID
black wire
Certain other communications devices may also use the 5.8 GHz / 900
MHz frequency for communication, and, if not properly set, these
devices may interfere with each other and/or your new telephone.
If you are concerned with interference, please refer to the owner’s
manual for these devices on how to properly set channels to avoid
interference. Typical devices that may use the 5.8 GHz frequency
for communication include wireless audio/video senders, wireless
computer networks, multi-handset cordless telephone systems, and
some long-range cordless telephone systems.
1. Press the mute/menu button until 41 tone 2 pulse shows in the display.
1 TONE is the default.
1. Make sure the answering system is ON.
2. Press and hold the announce button on the base.
3. Begin speaking after you hear the beep.
Provided you subscribe to Call Waiting Caller ID service from your phone company; if
you receive an incoming call and you are already on the phone, a beep indicates the
presence of a Call Waiting call on the line. Only the handset that is in use at the time of
the call will display and store the Call Waiting Caller ID information.
NOTE: You may still page the handset when the ringer is off.
2. Use the CALLER ID-VOLUME (5or6) button or the touch-tone pad on the handset
to scroll to 1 tone or 2 pulse.
Ringer ON/OFF Shortcut
PRESS DOWN
FIRMLY
Apart from the setting in the main menu, there is a shortcut to set the ringer. Make sure
red wire
4. Release the button when you finish your announcement.
•
When you hear the call waiting beep in the handset receiver, press the flash/answerer/
call waiting button to put the current call on hold and answer the incoming call. Press
flash/answerer/call waiting again to return to the original call.
3. Press mute/menu to save.
the phone is OFF (not in talk mode).
4. Insert the battery pack.
NOTE: If you choose not to record an outgoing announcement, a default
announcement plays instead. To return to the default announcement after
you have recorded your own outgoing announcement, press the announce
button and release it when you hear the beep.
1. Press the #PAUSE/ringer button to go to the ringer on/off menu.
ringer 41 on shows in the display. 1ON is the default.
5. Close the battery compartment by pushing the door up until it snaps into place.
Transfer ON/OFF
In order to use the Call Transfer feature (applicable ONLY with additional handsets),
you must have the Transfer ON/OFF set to ON through the menu of the transferring
handset.
Receiving CID Records
Base Station
2. Use the CALLER ID-VOLUME (
scroll to 1 on, or 2 off.
5or6) button or the touch-tone pad on the handset to
Important Installation Guidelines
When you receive a call, the Caller ID information is transmitted between the first and
second ring. The Caller ID information appears on the display while the phone rings,
giving you a chance to monitor the information and decide whether or not to answer
the call.
1. Choose an area near an electrical outlet and a telephone wall jack (RJ11C), and
place your cordless telephone on a level surface, such as a desktop or tabletop, or
you may mount it on the wall.
Sample Outgoing Announcement
Notice: The changes or modifications not expressly approved by the party responsible for compliance
• Avoid sources of noise and heat, such as motors, fluorescent lighting, microwave
ovens, heating appliances and direct sunlight.
3. Press the #PAUSE/ringer button to save your selection. You will hear a confirmation
tone.
could void the user's authority to operate the equipment
.
“Hi, tHis is (use your name Here), i can’t answer tHe pHone rigHt now, so
please leave your name, number and a brief message after tHe tone, and
i’ll get back to you. tHanks.”
1. Press the mute/menu button until transfer 41 off shows in the display.
2. Use the CALLER ID-VOLUME (5or6) button or the touch tone pad on the handset
and select 2 on.
Hearing Aid Compatibility (HAC)
• Avoid areas of excessive dust, moisture and low temperature.
• Avoid other cordless telephones or personal computers.
• Never install telephone wiring during a lightning storm.
• Never install telephone jacks in wet locations unless the jack is specifically
designed for wet locations.
• Never touch non-insulated telephone wires or terminals, unless the telephone line
has been disconnected at the network interface.
• Use caution when installing or modifying telephone lines.
Volume
This telephone system meets FCC standards for Hearing Aid Compatibility.
Storing CID Records (In CID Memory)
3. Press mute/menu again to save.
When the phone is ON (in TALK mode) press the CALLER ID-VOLUME (
5or6) button to
Reviewing the Announcement
If you are not at home or cannot answer, your telephone’s Caller ID memory stores the
data for the 40 most recent calls you received so you can see who called while you
were unavailable. When the 41st call is received, the oldest Caller ID record (1st call) is
automatically deleted.
Licensing
adjust the listening level. Choose from five volume settings. vol 1 is the lowest volume
and vol 5 is the highest volume.
Press and release the announce button to review your outgoing announcement.
Default Setting
Licensed under US Patent 6,427,009.
You may return handset settings to the factory default setup using this menu.
Rings to Answer
NOTE: The phone will automatically reset VOL 5 to VOL 4 after you
hang up.
FCC RF Radiation Exposure Statement
1. Make sure the answering system is ON.
1. Press the mute/menu button until default 4no shows in the display. NO is
the default.
You may review the stored information at any time. Calls received since your last review
show as new in the display. Calls that have not been previously reviewed but were
received from the same number more than once show as rept in the display.
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with a minimum distance of 20
centimeters between the radiator and your body. This transmitter must not be co-located or
operated in conjunction with any other antenna or transmitter.
2. Press flash/answerer/call waiting button on the handset to enter answerer remote
mode.
Mute
2. Plug one end of the telephone line cord into the TEL LINE jack at the back of the base
and the other end into a modular jack.
2. Use the CALLER ID-VOLUME (
5or6) button on the handset to scroll to yes or no.
Use mute during a phone conversation to speak privately and off-line with a third party.
Handset Layout
3. Press key [9] to enter Ring to Answer menu on handset.
NOTE: If you choose YES, all settings in the programmable menu
return to the factory defaults.
3. Plug the AC power converter into the electrical outlet and the DC connector into the
jack at the back of the base.
Reviewing CID Records
1. Press the mute/menu button. mute shows in the display. The party on the telephone
will not hear you.
display
4. Use the CALLER ID-VOLUME (5or6) button to choose 3 rings, 5 rings or Toll saver.
5. Press #PAUSE/ringer button to confirm the setting.
visual ringer
As calls are received and stored, the display is updated to let you know how many calls
have been received. To scroll CID records:
CAUTION:
RISKOFELECTRICSHOCK
DONOTOPEN
3. Press mute/menu to save.
TALK/CALL BACK
4. Place the handset in the base cradle. The charge/in use indicator turns on, verifying
the battery is charging. The unit will take 20 seconds to register and verify its security
code. ready shows in the display.
2. Press the mute/menu button when finished.
delete
Equipment Approval Information
(button)
NOTE: If you select Toll Saver (TS) the unit answers after the 3rd ring
if there ARE new messages, OR the unit answers after the 5th ring if
there ARE NO new messages.
THE EXCLAMATION
THE LIGHTNING
CAUTION: TO REDUCE THE
1. Make sure the phone is OFF (not in talk mode).
2. Press the CALLER ID-VOLUME (
(button)
Cordless Phone Basics
Charge/In Use Indicator
POINT WITHIN THE
TRIANGLE IS A
WARNING SIGN
ALERTING YOU OF
IMPORTANT
FLASH AND ARROW RISK OF ELECTRIC SHOCK, DO
Your telephone equipment is approved for connection to the Public Switched Telephone Network and
is in compliance with parts 15 and 68, FCC Rules and Regulations and the Technical Requirements for
Telephone Terminal Equipment published by ACTA.
WARNING:TO
Temporary Tone
HEAD WITHIN THE NOT REMOVE COVER (OR
6
) button to review the newest CID record.
) button to review the oldest CID record first.
PREVENT FIRE OR
ELECTRICAL SHOCK
HAZARD, DO NOT
EXPOSETHIS
TRIANGLE IS A
WARNING SIGN
ALERTING YOU OF
“DANGEROUS
VOLTAGE” INSIDE
THE PRODUCT.
BACK). NO USER
This feature is useful only if you have pulse (rotary) service. Temporary Tone Dialing
enables pulse (rotary) service phone users to access touch tone services offered by
banks, credit card companies, etc. For example, when you call your bank you may need
to enter your bank account number. Temporarily switching to touch tone mode allows
you to send your number.
SERVICEABLE PARTS INSIDE.
REFER SERVICING TO
QUALIFIED SERVICE
PERSONNEL.
CALLER ID-
CALLER ID-
VOLUME (6)
VOLUME (5)
(button)
NOTE: In case of a power failure, the handsets may display
unavailable when the TALK/CALL BACK button is pressed. You
must then place all handsets on the main base cradle for 20
seconds to re-register.
3. Press the CALLER ID-VOLUME (
5
INSTRUCTIONS
ACCOMPANYING
THE PRODUCT.
When the charge/in use indicator on the base is lit, the phone is ON or the handset is being
1
Notification to the Local Telephone Company
Handset Setup
charged. The handset visual ringer and base indicator flash when you receive a call.
On the bottom of this equipment is a label indicating, among other information, the US number
and Ringer Equivalence Number (REN) for the equipment. You must, upon request, provide this
information to your telephone company.
Dialing a CID Number
(button)
PRODUCT TO RAIN
OR MOISTURE.
SEE MARKING ON BOTTOM / BACK OF PRODUCT
There are eight programmable menus available: Language, Handset Name, Area Code,
Ringer ON/OFF, Ringer Tone, Tone/Pulse,Transfer ON/OFF and Default Setting.
1. Make sure the phone is OFF (not in TALK mode).
Answering a Call
mem
5. Allow the phone to charge for 16 hours prior to first use. If you don’t properly charge
the phone, battery performance is compromised.
redial
2. Use the CALLER ID-VOLUME (
5or6) button to display the desired record.
(memory
1. When the phone rings, pick up the handset and press the TALK/CALL BACK button.
The REN is useful in determining the number of devices you may connect to your telephone line and
still have all of these devices ring when your telephone number is called. In most (but not all) areas,
the sum of the RENs of all devices connected to one line should not exceed 5. To be certain of the
number of devices you may connect to your line as determined by the REN, you should contact your
local telephone company.
A plug and jack used to connect this equipment to the premises wiring and telephone network must
comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant
telephone cord and modular plug is provided with this product. It is designed to be connected to a
compatible modular jack that is also compliant. See installation instructions for details.
Notes
• This equipment may not be used on coin service provided by the telephone company.
• Party lines are subject to state tariffs, and therefore, you may not be able to use your own
telephone equipment if you are on a party line. Check with your local telephone company.
• Notice must be given to the telephone company upon permanent disconnection of your
telephone from your line.
• If your home has specially wired alarm equipment connected to the telephone line, ensure the
installation of this product does not disable your alarm equipment. If you have questions about
what will disable alarm equipment, consult your telephone company or a qualified installer.
US Number is located on the cabinet bottom.
(button)
1. Dial the telephone number and wait for the line to connect.
During programming, you may press the mute/menu button at any time to go to the
next option. To exit the menu, keep the previous setting and return to the standby
mode, press the *EXIT/tone button.
Introduction
button)
3. Press the TALK/CALL BACK button. The number dials automatically.
2. When finished, press the TALK/CALL BACK button again or place the handset on the
base cradle to hang up.
CAUTION: To reduce risk of personal injury, fire, or damage use
only the 5-2836 (gray) or 5-2760 (black) power adaptor listed in
the user’s guide. This power adaptor is intended to be correctly
orientated in a vertical or floor mount position.
2. When your call is answered, press the *EXIT/tone button on the handset to
temporarily change from pulse dialing to tone dialing.
format/trans
chan
CAUTION: When using telephone equipment, there are basic
safety instructions that should always be followed. Refer to the
IMPORTANT SAFETY INSTRUCTIONS provided with this product
and save them for future reference.
NOTE: Depending on (a) how the incoming caller’s phone number is
formatted when it is received, and (b) whether or not you previously
pre-programmed your local area code into the set up menu, you
may need to adjust the format of the incoming caller’s stored phone
number before making the call, press the format/trans button to
adjust the number, and try again
(format/transfer
(channel button)
button)
play stop
3. Follow the automated instructions to get the information you need.
Making a Call
Display Language
(button)
repeat
1. Pick up the handset and press the TALK/CALL BACK button. Wait for the dial tone.
The call timer starts counting minutes and seconds in the display.
1. Press the mute/menu button until 41eng 2fra 3esp shows in the display. 1ENG is
4. Hang up the handset and the phone automatically returns to pulse (rotary)
dialing mode.
(button)
Wall Mounting
skip (button)
IMPORTANT: Because cordless phones operate on electricity, you
should have at least one phone in your home that isn’t cordless, in
case the power in your home goes out.
the default. (ENG stands for English. FRA stands for French. ESP stands for Spanish.)
erase
1. Turn the base over.
2. Dial a telephone number.
2. Use the CALLER ID-VOLUME (5or6) button or the touch-tone pad on the
handset to enter your selection.
(button)
Call Transfer (applicable only with additional handsets)
#PAUSE/ringer
(button)
2. Attach the wall mounting pedestal by first inserting the tabs on the open edge of
the pedestal into the slots on the lower portion of the bottom of the base. Then push
down and snap the pedestal into place.
Available formats include:
3. When finished, press the TALK/CALL BACK button again or place the handset on the
base cradle to hang up.
During an external call, you may transfer the external call to another handset.
3. Press mute/menu again to save.
Number of digits
Explanation
Example
*EXIT/tone
(button)
Before You Begin
1. Press the format/trans button on the originating handset. transferring shows in
the display. All registered handsets will be paged.
NOTE: In case of power failure, the handset may display
unavailable when the TALK/CALL BACK button is pressed. You
must then place the handset on the main base for 20 seconds to
reset the unit.
Eleven digits
long distance code “1 ”
+3-digit area code
1-317-555-8888
Handset Name
mute/menu
3. Slip the mounting holes (on the back of the base) over the wall plate posts, and slide
the unit down into place. (Wall plate not included.)
Parts Checklist
(for 25942xx1 model)
Make sure your package includes the items shown here.
flash/answerer/
1. Press the mute/menu button until enter name shows in the display.
(button)
2. Press the format/trans button or TALK/CALL BACK on receiving handset to answer
call.
call waiting (button)
+7-digit telephone number.
3-digit area code +
2. Use the touch-tone pad to enter the name (up to 15 characters). More than one
letter is stored in each of the number keys. For example, to enter the name Bill
Smith, press the 2 key twice for the letter B. Press the 4 key 3 times for the letter
I. Press the 5 key 3 times for the letter L. Wait for one second. Press the 5 key 3
times for the second letter L. Press th e 1 key to insert a space between the L and
the S. Press the 7 key 4 times for the letter S; press the 6 key once for the letter M;
press the 4 key 3 times for the letter I; press the 8 key for the letter T; press the 4
key twice for the letter H.
NOTE: If desired, gather the extra telephone line and power adaptor
cord and store inside the wall mounting pedestal.
microphone
Ten digits
317-555-8888
555-8888
NOTE: To cancel the call transfer, you may press *EXIT/tone button
or the format/trans button on the originating handset.
Base Layout
7-digit telephone number.
Pre-dialing
PLAY/STOP
(button)
1. Make sure the phone is OFF (not in TALK mode).
Seven digits
7-digit telephone number.
Answering System Setup
NOTE: If there is no answer within 2 minutes after transferring
the call, then the handsets will be rung back (callback). If no
handset answers within 30 seconds, then the external call will be
automatically dropped.
REN Number is located on the cabinet bottom
Rights of the Telephone Company
2. Dial a telephone number (the number you dial shows in the display).
This section shows you how to set up your answering system to receive incoming calls.
Before you begin the set up process, you must turn on the answering system.
2
MESSAGES
(indicator)
Storing CID Records in Internal Memory
Battery
Should your equipment cause trouble on your line which may harm the telephone network, the
telephone company shall, where practicable, notify you that temporary discontinuance of service
may be required. Where prior notice is not practicable and the circumstances warrant such
action, the telephone company may temporarily discontinue service immediately. In case of such
temporary discontinuance, the telephone company must: (1) promptly notify you of such temporary
discontinuance; (2) afford you the opportunity to correct the situation; and (3) inform you of your
right to bring a complaint to the Commission pursuant to procedures set forth in Subpart E of Part
68, FCC Rules and Regulations.
NOTE: If you make a mistake dialing the number, use the delete
button to backspace and erase the wrong number, and enter the
correct number.
You may also store CID information in the phone’s internal memory.
8 skip
Handset
compartment
cover
(button)
• Press the ans on/off button to turn the answering system ON and OFF.
The MESSAGES indicator lights when the answering system is ON. The indicator
blinks when you have new messages.
NOTE: It is important that you format CID records correctly BEFORE
storing in internal memory as you cannot reformat CID records
stored in memory.
battery pack
Base
Handset
NOTE: If you make a mistake, use the delete button to backspace
and delete one character at a time.
3. Press mute/menu again to save.
memo
3. Press the TALK/CALL BACK button on that handset. The number automatically dials
and the call timer starts counting the minutes and seconds in the display.
(button)
7 repeat
NOTE: The answering system displays “- -” when it is OFF.
(button)
1. Make sure the phone is OFF (not in talk mode).
2. Use the CALLER ID-VOLUME (
4. When finished, press the TALK/CALL BACK button again to hang up.
NOTE: If no name is entered, ready shows in the display.
5or6) button to scroll to the desired CID record.
announce
(button)
Setting the Voice Prompt Language
NOTE : You may enter up to 32 pre-dial digits.
AC power
adaptor
Telephone
line cord
Wall mount
bracket
The default voice prompt language is English.
3. Press the mem button.
Local Area Code
4. Use the touch-tone pad to enter a memory location (0-9) to store the number in that
memory location. You will hear a confirmation tone.
To change the answering system’s voice prompt language, press and hold the skip
button for two seconds. The unit announces “seleccionado espanol” (Spanish
selected).
Redial
1. Press the mute/menu button until area code - - - shows in the display. - - - is
page
erase
While the phone is ON (in TALK mode), press the redial button to redial the last number
For Model 25942xx2 there will be ONE additional handset, charge cradle, battery pack
and cover than shown above.
(button)
the default.
(button)
you dialed (up to 32 digits).
NOTE: If the memory location is occupied, replace memo? is
displayed, and you must confirm replacement by pressing the mem
button.
2. Use the touch-tone pad on the handset to enter your three digit area code.
3. Press mute/menu again to save.
Thomson Inc.
NOTE: To change to English, press and hold the skip button again for
2 seconds. The unit announces “englisH selected”.
- OR -
For Model 25942xx3 there will be TWO additional handsets, charge cradles, battery
packs and covers than shown above.
101 West 103rd Street
While the phone is OFF (in standby mode), press the redial button and then the
TALK/CALL BACK button to redial the last number.
Model 25942C
00019461 (Rev. 4 Dom E)
08-05
Indianapolis, IN 46290-1102
© 2008 Thomson Inc.
Trademark(s) ® Registered
Marca(s) Registrada(s)
NOTE: If you make a mistake, press the delete button to erase a
wrong number.
ans on/off
NOTE: Press the *EXIT/tone button once to keep the previous setting
(making no changes) and return to the menu.
NOTE: In remote access mode, the system follows the selected
language. The voice prompt language cannot be switched remotely.
For Model 25942xx4 there will be THREE additional handsets, charge cradles, battery
packs and covers than shown above.
(answerer on/off
button)
charge/in use
(indicator)
volume (-/+)
(buttons)
Printed in China
Download from Www.Somanuals.com. All Manuals Search And Download.
|