JGP970TEK/KEK/BEK
GE Profile™ 36" Built-In Gas Cooktop
Dimensions and Installation Information
21-5/16
AGA Requirement: All gas cooktop models require
7/16" free area below cooktop height to combustible
material. Requires 18" minimum from countertop to
adjacent overhead cabinets.
36
13" MAX.
depth
Cooktop
3-3/16*
Note: Curved front may interfere with some raised
bullnose countertops. If installing with a GE ProfileTM
Telescopic Downdraft System, consult both cooktop and
downdraft installation instructions packed with product
before installing. Cooktop gas/electric supply may need
to be re-routed to install downdraft.
30" MIN. to
unprotected
cabinet
19-1/8
6" MIN.
clearance to
side wall
18" MIN.
to cabinet
33-7/8
2-1/4" to
rear wall
from cut-out
Electrical Rating: 120V, 60Hz, 5A
Installation With Single Wall Oven Information:
30" Gas Cooktops are approved for use over select GE 27"
and 30" Wall Ovens and Warming Drawers. 30" and 36"
Gas cooktops are approved for use over 30" Wall Ovens
and Warming Drawers. Refer to cooktop and wall oven/
warming drawer installation instructions packed with
product for current dimensional data.
2-1/2
(Min.)
3-3/4" MIN.
clearance to
side wall
*Allow 5-3/4" depth at rear for electrical and
gas connections
from cut-out
Installation Information: Before installing, consult
installation instructions, packed with product, for current
dimensional data.
Electrical junction
box 12" MIN.
below countertop
Cut should
not interfere
with cabinet
structure at
front
For answers to your Monogram,® GE Profile™ or
GE® appliance questions, visit our website at
ge.com or call GE Answer Center® service,
800.626.2000.
Dimension and installation information are shown in inches.
Specification Revised 10/05
230274
Download from Www.Somanuals.com. All Manuals Search And Download.
|