Fujitsu TV Cables FCN 086 User Manual
2mm pitch metric connectors  
For pcb connection  
Fcn-086 /087 series  
noVerVieW  
Fujitsu’s 2mm hard metric connector F-PACK-3 (FCN-086/087 series) are connectors for connecting boards  
developed to support high-speed transmission/high density packaging of communication equipment,  
conforms to IEC 917 (DIN 43355) and IEC 61076-4-101, and supports compact PCI. Product meets Bellcor  
1217. To support high-speed transmission, these connectors implement low inductance, low cross-talk, and  
matching characteristic impedance (50 ohms), exhibiting superb transmission characteristics.  
Connection with the PCB is solderless (press fit) for both the plug/socket side, making mounting cost effective.  
Insertion connections are completely unnecessary since a polarity key is supported.  
Plug contact has a four level sequence structure that makes connection/disconnection in an active state  
possible. Terminals have a five level pin length to support various applications. New customized connectors  
can be supported by freely combining the pin lengths of contacts and terminals.  
For shield plate products, which support high-speed transmission based on standard products, 5 row 55,  
95, 110, 110 (with key) and 125 contact, plugs support 77, 133, 154 and 175 contacts. The shield plate  
corresponds to the respective number of contacts, and the standard is post attachment. Sockets can also  
be shipped with shields pre-attached.  
8 row products are also in the series. Consult factory for your requirements.  
Fujitsu has developed a new high density power connector (25% denser) to improve operability.  
A double press fit, which can connect two printed boards with one connector, greatly contributes to  
improved mounting and decreasing cost. Consult factory for details.  
ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.  
Fcn-086 / 087 series  
nterminal conFiguration oF plug  
The contact pins have a three-level sequence structure and can be connected/disconnected in an ac-  
tive state. The terminal side can support various applications with four types of length. These combi-  
nations allow 20 types of terminals.  
Relationship between housing and terminals  
Terminal types in the series  
Contact length  
PWB Surface  
Lead length  
PC Board Face  
Contact Types  
Contact length  
PWB Surface  
Lead length  
Specifications  
subject to change  
Dimensions are in millimeters (inches)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
www.fcai.fujitsu.com  
ꢁ
Fcn-086 / 087 series  
Request Form for Customer Specific Pin Arrangement for 2mm Connectors  
Part of the benefit of using the FCN-086 2mm Backplane connector is the flexibility of creating unique  
contact loads in the connector body. To define your needs, make a photocopy of the following page(s),  
select your connector needs, and fill in the blanks with the specific contact designation (see page 5 for  
available contacts). Forward to Fujitsu for quotation and part number assignment. (Please note that the pin  
arraignment drawings are "View from the Mating Side").  
1. TYPE A (110 pos. with polarization key) (5+2)  
f
e
d
c
b
a
z
1 2 3 4 5 6 7 8 9 10 11  
2. TYPE B (125 pos.) (5+2)  
1516 17 18 19 20 2122 23 2425  
f
e
d
c
b
a
z
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 2122 23 2425  
3. TYPE C (55 pos.) (5+2)  
f
e
d
c
b
a
z
1 2 3 4 5 6 7 8 9 10 11  
4. 95 pos. (5+2)  
f
e
d
c
b
a
z
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19  
Specifications  
subject to change  
Dimensions are in millimeters (inches)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
www.fcai.fujitsu.com  
ꢂ
Fcn-086 / 087 series  
n transmission characteristics  
The transmission characteristics were designed to an optimum level by repeating various transmission  
characteristics simulations when the structure was designed, so as to improve the transmission character-  
istics of this connector. The characteristic impedance and the measurement device of the connector are  
shown below.  
Measurement Point  
Measurement Result  
a
b
c
Fujitsu Components  
At Start  
100 ps  
300 ps  
500 ps  
1 ns  
d
e
Frequency: Hz  
1.75 GHz  
580 MHz  
350 MHz  
175 MHz  
Characteristic Impedance (  
Near/Far end cross talk: %  
)
45.3 to 64. 0 48.2 to 56.8 49.2 to 54.6 49.3 to 52.8  
Ω
Ground  
Not connected  
1.96/1.14  
1.49/0.78  
1.06/0.51  
0.71/0.27  
Measurement signal  
Other Supplier  
At Start  
100 ps  
300 ps  
500 ps  
1 ns  
Frequency: Hz  
1.75 GHz  
580 MHz  
350 MHz  
175 MHz  
Characteristic Impedance (  
Near/Far end cross talk: %  
)
47.4 to 66. 1 48.2 to 56.8 49.5 to 59.2 47.7 to 53.5  
Ω
2.24/1.41  
1.57/0.98  
1.14/0.67  
0.78/0.35  
300.0m  
Delay Time  
signal  
10.00m  
V/Div.  
Characteristic  
Impedance  
in  
out  
200.0m  
49.00n  
50.00n  
100.0p S/Div  
PC board part  
PC board part PC board part  
1.Measurement voltage: Vin = 5.0V  
2.Rise time: Tr = 100ps, 300ps, 500ps, 1ns  
3.Measurement device: TDR measurement device CSA803 and SD24 (Tektronix)  
4.Measurement system  
Coaxiaclableformeasurement  
Ω
50Ω terminaticoonnnect  
o
Plug  
Socket  
CSA 80.3  
SD 24  
Measurementboard  
Specifications  
subject to change  
Dimensions are in millimeters (inches)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
www.fcai.fujitsu.com  
5
Fcn-086 /087 series compact pci / Vme  
nstandard and hot sWap part numbers  
Coding Keys for Daughter Card  
Coding Keys for Midplane/Backplane  
FCN-086A3456 - 3.3V  
FCN-086B1278 - 3.3V  
P1  
or  
J1  
or  
FCN-086A2348 - 5.0V  
FCN-086B2348 - 5.0V  
Backplane  
Female  
Receptacles  
MalePin  
Headers  
Female  
Receptacles  
1
J5  
4
5
P5  
P4  
RJ5 1  
2
3
1
J4  
J3  
J2  
RJ4  
RJ3  
RJ2  
2
3
1
6
4
P3  
P2  
Standard  
5
2
J1  
HotSwap P1  
7
Reference  
Number  
Part Number  
Designations  
160.0(63.0)  
J5, J2, RJ5,  
RJ2  
1
FCN-086J110-G111A-BCR  
FCN-086J110-G111-BCR  
2
3
4
5
6
7
8
9
J4, J1, RJ4  
ncomputer telephony part numbers  
FCN-086J095-G111A-BCR J3, RJ3  
FCN-086P154-G/111A-BCR P5, P2  
Coding Keys for Midplane/  
Backplane  
FCN-086A3456 - 3.3V  
Coding Keys for Daughter Card  
FCN-086P154-G/104-BCR  
P4, P1  
FCN-086B1278 - 3.3V  
or  
J1  
FCN-086P133-G/111A-BCR P3  
P1  
or  
FCN-086B2348 - 5.0V  
FCN-086B3567 - J4  
FCN-086P154-G/114-BCR  
Future Products  
P1  
FCN-086A2348 - 5.0V  
FCN-086B1248 - P4  
J4, P5  
P4  
FCN-086P154-G/516-BCR  
Backplane  
Female  
Receptacles  
Male Pin  
Headers  
Female  
Receptacles  
P5  
8
J5  
1
RJ5  
RJ3  
1
9
P4  
P3  
P2  
8
3
1
J4  
J3  
3
6
4
J2  
J1  
2
P1  
7
160.0 (6.30)  
80.0 (3.15)  
Specifications  
subject to change  
Dimensions are in millimeters (inches)  
www.fcai.fujitsu.com  
6-6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Fcn-086 /087 series compact pci / Vme  
pꢁ type ꢁ  
STRAIGHT PLUG (133 POSITIONS)  
nmounting hole layout  
ndimensions  
Thickness: 1.4 to 5.6 mm (.055 to .220 in.)  
Drill hole Diameter: φ0.7±0.025 mm (.028 in.)  
Through hole diameter (after plating): φ0.6±0.05  
mm (.024)  
+0.2  
9.7  
0
3.7  
(0.146)  
+0.008  
(0.382  
)
0
+0.2  
11.2  
0
3.7  
(0.146)  
+0.008  
(0.440  
)
0
2x(7-1)=12  
(0.472)  
2
2x(19-1)=36±0.1 (1.417±0.004)  
2±0.5  
(0.079±0.002)  
(0.079)  
2
2
(0.079)  
2x(7-1)=12  
(0.079)  
2x(19-1)=36 (1.417)  
(0.472)  
Unit: mm (in.)  
Unit: mm (in.)  
n
ordering part number: FCN-086P133-G/111A-BCR  
pꢁ type b male Feed through  
STRAIGHT PLUG (133 POSITIONS)  
ndimensions  
nmounting hole layout  
Thickness: 1.4 to 5.6 mm (.055 to .220  
+0.2  
11.2  
0
3.7  
(0.146)  
in.)  
+0.008  
(0.440  
)
0
Drill hole Diameter: φ0.7±0.025 mm (.028  
+0.2  
0
(0.039  
8.2  
in.)  
+0.008  
)
16 (0.630)  
16 (0.630)  
+0.2  
11.2  
0
+0.008  
0
(0.440  
)
2x(7-1)=12  
(0.472)  
2x(19-1)=36 ±0.1 (1.417±0.004)  
2
2±0.5 (0.079±0.002)  
(0.079)  
2
2
(0.079)  
(0.079)  
2x(19-1)=36 (1.417)  
2x(7-1)=12  
(0.472)  
Unit: mm (in.)  
Unit: mm (in.)  
n
ordering part number: FCN-086P133-G/502A-BCR  
Specifications  
subject to change  
Dimensions are in millimeters (inches)  
www.fcai.fujitsu.com  
6-7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Fcn-086 /087 series compact pci / Vme  
pꢀ/pꢂ type a  
STRAIGHT PLUG (154 POSITIONS)  
nmounting hole layout  
ndimensions  
Thickness: 1.4 to 5.6 mm (.055 to .220 in.)  
Drill hole Diameter: Ø0.7±0.025 mm (.028 in.)  
Through hole diameter (after plating): Ø0.6±0.05  
mm (.024)  
+0.2  
0
8.2  
3.7  
(0.146)  
+0.008  
(0.039  
)
+0.2  
0
+0.008  
9.7  
3.7  
(0.146)  
(0.382  
)
+0.2  
0
11.2  
3.7  
(0.146)  
+0.008  
0
(0.440  
)
8±0.5  
(0.315±0.002)  
2x(11-1)=20±0.5  
2x(11-1)=20±0.5  
2x(7-1)=12  
(0.472)  
(0.787±0.002)  
(0.787±0.002)  
4±0.5  
(0.157±0.002)  
2±0.5  
(0.079±0.002)  
2
(0.079)  
2
(0.079)  
2
(0.079)  
2x(11-1)=20 (0.787)  
2x(11-1)=20 (0.787)  
2x(7-1)=12  
24 (0.945)  
(0.472)  
48 (1.890)  
Unit: mm (in.)  
Unit: mm (in.)  
n
ordering part number: FCN-086P154-G/104-BCR  
P2/P5 TYPE B  
STRAIGHT PLUG (154 POSITIONS)  
ndimensions  
nmounting hole layout  
Thickness: 1.4 to 5.6 mm (.055 to .220 in.)  
Drill hole Diameter: Ø0.7±0.025 mm (.028 in.)  
Through hole diameter (after plating): Ø0.6±0.05  
mm (.024)  
+0.2  
9.7  
0
3.7  
(0.146)  
+0.008  
0
(0.382  
)
+0.2  
11.2  
3.7  
0
+0.008  
0
(0.146)  
(0.440  
)
2x(22-1)=42±0.1 (01.654±0.004)  
2x(7-1)=12  
(0.472)  
2±0.5  
(0.079±0.002)  
2
(0.079)  
2
2 (0.079)  
(0.079)  
2x(22-1)=42(1.654)  
2x(7-1)=12  
(0.472)  
Unit: mm (in.)  
Unit: mm (in.)  
n
ordering part number: FCN-086P154-G/111A-BCR  
Specifications  
subject to change  
Dimensions are in millimeters (inches)  
www.fcai.fujitsu.com  
6-8  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Fcn-086 /087 series compact pci / Vme  
pꢀ type a hot sWap ꢀꢀ0 signal connector  
STRAIGHT PLUG (154 POSITIONS)  
nmounting hole layout  
ndimensions  
Thickness: 1.4 to 5.6 mm (.055 to .220 in.)  
Drill hole Diameter: Ø0.7±0.025 mm (.028 in.)  
Through hole diameter (after plating): Ø0.6±0.05  
mm (.024)  
+0.2  
0
+0.008  
8.2  
3.7  
(0.146)  
(0.039  
)
+0.2  
0
+0.008  
9.7  
3.7  
(0.146)  
(0.382  
)
+0.2  
11.2  
3.7  
0
(0.146)  
+0.008  
0
(0.440  
)
8±0.5  
(0.315±0.002)  
2x(11-1)=20±0.5  
(0.787±0.002)  
2x(11-1)=20±0.5  
(0.787±0.002)  
2x(7-1)=12  
(0.472)  
2±0.5  
(0.079±0.002)  
4±0.5  
(0.157±0.002)  
2
(0.079)  
2
(0.079)  
2
(0.079)  
2x(11-1)=20 (0.787)  
2x(11-1)=20 (0.787)  
2x(7-1)=12  
(0.472)  
24 (0.945)  
48 (1.890)  
Unit: mm (in.)  
Unit: mm (in.)  
n
ordering part number: FCN-086P154-G/114-BCR  
pꢂ type a male Feed through  
STRAIGHT PLUG (154 POSITIONS)  
ndimensions  
nmounting hole layout  
Thickness: 1.4 to 5.6 mm (.055 to .220 in.)  
Drill hole Diameter: Ø0.7±0.025 mm (.028 in.)  
Through hole diameter (after plating): Ø0.6±0.05  
mm (.024)  
+0.2  
0
(0.039  
8.2  
+0.008  
)
16 (0.630)  
16 (0.630)  
+0.2  
0
11.2  
+0.008  
0
(0.440  
)
2x(7-1)=12  
(0.472)  
8±0.5  
(0.315±0.002)  
2x(11-1)=20±0.5  
(0.787±0.002)  
2x(11-1)=20±0.5  
(0.787±0.002)  
4±0.5  
2
2±0.5  
(0.079±0.002)  
(0.079)  
(0.157±0.002)  
2
(0.079)  
2
(0.079)  
2x(11-1)=20 (0.787)  
2x(11-1)=20 (0.787)  
2x(7-1)=12  
24 (0.945)  
(0.472)  
48 (1.890)  
Unit: mm (in.)  
Unit: mm (in.)  
n
ordering part number: FCN-086P154G/401-BCR  
Specifications  
Dimensions are in millimeters (inches)  
subject to change  
www.fcai.fujitsu.com  
6-ꢃ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Fcn-086 /087 series compact pci / Vme  
type 2 Feed through  
STRAIGHT PLUG (154 POSITIONS)  
nmounting hole layout  
ndimensions  
Thickness: 1.4 to 5.6 mm (.055 to .220 in.)  
Drill hole Diameter: Ø0.7±0.025 mm (.028 in.)  
Through hole diameter (after plating):  
Ø0.6±0.05 mm (.024)  
8.2+0.2  
0
(0.039+0.008  
)
16 (0.630)  
16 (0.630)  
11.20+0.2  
(0.440+0.008  
)
0
2x(7-1)=12  
(0.472)  
2
2x(22-1)=42±0.1  
(0.079)  
(1.654±0.004)  
2±0.5 (0.079±0.002)  
2
(0.079)  
154 - Ø0.6±0.05  
(0.024±0.002)  
2
(0.079)  
2x(22-1)=42 (1.654)  
2x(7-1)=12  
(0.472)  
Unit: mm (in.)  
Unit: mm (in.)  
n
ordering part number: FCN-086P154-G/401A-BCR  
type 2 Feed through  
STRAIGHT PLUG (154 POSITIONS)  
ndimensions  
nmounting hole layout  
11.20+0.2  
(0.440+0.008  
3.7  
(0.146)  
Thickness: 1.4 to 5.6 mm (.055 to .220 in.)  
Drill hole Diameter: Ø0.7±0.025 mm (.028 in.)  
Through hole diameter (after plating):  
Ø0.6±0.05 mm (.024)  
)
0
8.2+0.2  
0
(0.039+0.008  
0
)
16 (0.630)  
11.20+0.2  
16 (0.630)  
(0.440+0.008  
)
0
2x(7-1)=12  
(0.472)  
2x(22-1)=42±0.1 (1.654±0.004)  
2
2±0.5  
(0.079±0.002)  
(0.079)  
154 - Ø0.6±0.05  
(0.024±0.002)  
2
2
(0.079)  
2x(22-1)=42 (1.654)  
(0.079)  
2x(7-1)=12  
(0.472)  
Unit: mm (in.)  
Unit: mm (in.)  
n
ordering part number: FCN-086P154-G/502A-BCR  
Specifications  
subject to change  
Dimensions are in millimeters (inches)  
www.fcai.fujitsu.com  
6-ꢀ0  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Fcn-086 /087 series compact pci / Vme  
P5 TYPE B FEEd THRU COmPUTER TELEPHONY CONNECTOR  
STRAIGHT PLUG (154 POSITIONS)  
nmounting hole layout  
ndimensions  
+0.2  
0
11.2  
3.7  
(0.146)  
+0.008  
0
(0.440  
)
Thickness: 1.4 to 5.6 mm (.055 to .220 in.)  
Drill hole Diameter: Ø0.7±0.025 mm (.028 in.)  
Through hole diameter (after plating): Ø0.6±0.05  
mm (.024)  
+0.2  
0
8.2  
+0.008  
0
(0.039  
)
16 (0.630)  
+0.2  
0
11.2  
+0.008  
0
(0.440  
)
16 (0.630)  
2x(7-1)=12  
(0.472)  
2x(22-1)=42±0.1 (1.654±0.004)  
2±0.5  
(0.079±0.002)  
2
(0.079)  
154 - Ø0.6±0.05  
(0.024±0.002)  
2
(0.079)  
2
2x(22-1)=42 (1.654)  
(0.079)  
2x(7-1)=12  
(0.472)  
Unit: mm (in.)  
Unit: mm (in.)  
n
ordering part number: FCN-086P154-G/503A-BCR  
pꢂ type a computer telephony connector  
STRAIGHT PLUG (154 POSITIONS)  
ndimensions  
nmounting hole layout  
8.2+0.2  
0
3.7  
(0.146)  
Thickness: 1.4 to 5.6 mm (.055 to .220 in.)  
Drill hole Diameter: Ø0.7±0.025 mm (.028 in.)  
Through hole diameter (after plating): Ø0.6±0.05  
mm (.024)  
(0.039+0.008  
)
0
9.7+0.2  
3.7  
(0.146)  
(0.382+00.008  
0
)
11.20+0.2  
3.7  
(0.146)  
(0.440+0.008  
)
0
8±0.5  
2x(11-1)=20±0.5  
2x(11-1)=20±0.5  
(0.315±0.002)  
(0.787±0.002)  
(0.787±0.002)  
2x(7-1)=12  
4±0.5  
(0.157±0.002)  
(0.472)  
2±0.5  
(0.079±0.002)  
2
(0.079)  
2
(0.079)  
2
(0.079)  
2x(11-1)=20 (0.787)  
2x(11-1)=20 (0.787)  
24 (0.945)  
2x(7-1)=12  
(0.472)  
48 (1.890)  
Unit: mm (in.)  
Unit: mm (in.)  
n
ordering part number: FCN-086P154-G/516-BCR  
Specifications  
subject to change  
Dimensions are in millimeters (inches)  
www.fcai.fujitsu.com  
6-ꢀꢀ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Fcn-086 / 087 series  
SOCKET: 55 CONTACTS  
ndimensions  
2 x (11-1) = 20 (.787)  
2 (.079)  
10.95 (0.431)  
3.7  
(0.146)  
3.4  
(0.134)  
2.35  
(.093)  
2
(.079)  
e
d
nmounting hole layout  
b
a
Thickness: 1.4 to 2.0 mm (.055 to .220 in.)  
Drill hole Diameter: Ø0.7±0.025 mm (.028 in.)  
Through hole diameter (after plating): Ø0.6±0.05  
mm (.024)  
25 (.984)  
2 x (11-1) = 20 (.787)  
2 (.079)  
2
(.079)  
2 x (5-1) = 8 (.315)  
11.4 (0.449)  
2±0.05 (.079±0.002)  
Section A-A  
2x (11-1)=20±0.05  
(0.787±0.002)  
Unit: mm (in.)  
Unit: mm (in.)  
n
ordering part number: FCN-086J055-G/101-BCR  
FCN-086J055-G/111-BCR (with pre-attached upper shield)  
shield plate  
ndimensions  
ndimensions  
4 x (6-1)=20 (0.787)  
4±0.2  
(0.157±0.008)  
4 x (5-1)=16 (0.630)  
4±0.2  
(0.157±0.008)  
21.7±0.2 (0.854±0.008)  
21.7±0.2 (0.854±0.008)  
2±.1  
2±.1  
(.079±.004)  
0.40-0.1  
(.079±.004)  
90°  
0.40-0.1  
(0.0160-0.004  
)
(0.0160-0.004  
)
1
0.7±0.1  
(0.039)  
(0.0281±0.004)  
0.7±0.1  
(0.0281±0.004)  
1±0.1 (0.139±0.004)  
2±0.1(0.079±0.004)  
2 x (11-1)=20 (0.787)  
1
1±0.1 (0.139±0.004)  
2±0.1(0.079±0.004)  
(0.039)  
21.15 MAX.  
(0.833)  
2 x (11-1)=20 (0.787)  
21.15 MAX.  
Unit: mm (in.)  
(0.833)  
Unit: mm (in.)  
n
ordering part number:  
n
ordering part number:  
FCN-086J055-G/LSD-BCR (bottom shield  
FCN-086J055-G/USD-BCR (top shield plate)  
plate)  
Specifications  
Dimensions are in millimeters (inches)  
subject to change  
www.fcai.fujitsu.com  
ꢀ2  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Fcn-086 / 087 series  
SOCKET: 95 NTACTS  
ndimensions  
2 x (19-1) = 36 (1.41
2 (.079)  
10.95 (0.431)  
2
3.7  
(0.146)  
3.4  
2.35  
(.093) (.079)  
(0.134)  
e
d
A
nmounting hole layout  
b
a
Thickness: 1.4 to 2.0 mm (.055 to .220 in.)  
Drill hole Diameter: Ø0.7±0.025 mm (.028 in.)  
Through hole diameter (after plating): Ø0.6±0.05  
mm (.024)  
A
38 (1.470)  
2
(9)  
2 x (19-1) = 36 (1.417)  
2 x (5-1) = 8 (.315)  
2 (.079)  
11.4 (0.449)  
Section A-A  
2±0.05 (.079±0.002)  
2x (19-1)=36±0.05  
(1.417±0.002)  
Unit: mm (in.)  
Unit: mm (in.)  
n
ordering part number: FCN-086J095-G/101A-BCR  
FCN-086J5-G/11A-BCR (with pre-attached upper shield)  
shield plate  
dimensio
ndimensions  
4 x (10-1)=36 (1.417)  
4±0.2  
(0.157±0.008)  
4 x (9-1)=3(1.260)  
(0.15±0.8)  
37.7±0.2 (1.484±0.0)  
21  
(.79±.04)  
2±.1  
0.0-0.1  
(.079±.004)  
(0.0160
)
0.40-0.1  
(0.0160  
)
-0.004  
0.7±0.1(0.028
1±0.1 004)  
2±0.1(0.079±0.004
2 x (19-1)=36(1.417)  
37.15 MAX. (1.463)  
0.7±0.1(0.0281±0.004)  
1
1±0.1 (0.139±0.004)  
2±0.1(0.079±0.004)  
(0.039)  
1
2 x (19-1)=36(1.417)  
37.15 MAX. (1.463)  
(0.039)  
Unit: mm (in.)  
Unit: mm (in.)  
n
ordering part number:  
n
ordering part number:  
FCN-086J095-G/VSD-BCR (top shield plate)  
FCN-086J095-G/MSD-BCR (bottom shield plate)  
Specifications  
Dimensions are in millimeters (inches)  
subject to change  
www.fcai.fujitsu.com  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢀꢁ  
Fcn-086 / 087 series  
socKet: ꢀꢀontacts  
ndimensions  
48 (1.890)  
2 x (11-1
2 x (11-120 (0.898)  
2 (.079)  
10.95 (0.431)  
2
3.7  
2.35  
(0.146)  
3.4  
(.093) (.079)  
(0.134)  
e
d
nmounting hole layout  
Thickness: 1.4 to 2.0 mm (.055 to .220 in.)  
Drill hole Diameter: Ø0.7±0.025 mm (.028 in.)  
Through hole diameter (after plating): Ø0.6±0.05 mm  
(.024)  
b
a
50 (1.969)  
48 (1.890)  
(.079)  
2 x (5-1) = 8 (.315)  
2 x (11-1) = 20 (0.898)  
2 x (11-1) = 20 (0.898)  
2 (.079)  
2 (.079)  
11.4 (0.449)  
Seion A-A  
2±0.05 (.079±0.002)  
2x (25-1)=48±0.05  
(1.890±0.002)  
Unit: mm (in.)  
Unit: mm (in.)  
n
ordering part number: FN-086J110-G/101-BCR  
FCN-086J110-G/111-BCR (with pre-attached upper shield)  
shield plate  
ndimensions  
ndimensi
4 x (13-1)=48 (1.890)  
4 x (12-1)=(1.2)  
4±0.2  
4±0.2  
157±0.)  
(0.157±0.008)  
49.70.2 (1.957±0.008)  
49.7±0.2 (1.957±0.008)  
2±.1  
2
(.079±.004)  
0.40-0.1  
.004  
)
(0.0160-0.004  
)
00.1  
(0.02±0.004)  
±.1(.004)  
2±.17)  
2 x 11-1
0.7±0.1  
(0.0281±0.004)  
6.35±0.15  
(0.25±0.006)  
1 (0.139)  
6.35±0.15  
(0.25±0.006)  
1±0.1 (0.139±0.004)  
2±0.1(0.079±0.004)  
1
2 x (11-1)=20 (0.787)  
2 x (11-1)=20  
(0.787)  
(0.039)  
49.15 MAX. (0.78)  
(1.935)  
2 x (11-1)=20 (0.787)  
49.15 MAX.  
(1.935)  
Unit: mm (in.)  
Unit: mm (in.)  
n
ordering part number:  
n
ordering part number:  
FCN-086J110-G/USD-BCR (with key, top  
shield plate)  
FCN-086J110-G/LSD-BCR (with key,  
bottom, shield plate)  
Specifications  
subject to change  
Dimensions are in millimeters (inches)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
www.fcai.fujitsu.com  
ꢀꢂ  
Fcn-086 / 087 series  
socKet: ꢀꢀ0 contacts Without Key  
ndimensons  
2 x (24(1.654)  
2 (.079)  
10.95 (0.431)  
3.7  
2.35  
(.093)  
(0.146)  
3.4  
(0.134)  
2
(.079)  
e
d
nmounting hole layout  
Thickness: 1.4 to 2.0 mm (.055 to .220 in.)  
Drill hole Diameter: ∅0.7±0.025 mm (.028 in.)  
Through hole diameter (after plating):  
∅0.6±0.05 mm (.024)  
b
a
44 (1.732)  
2 x (22-1) = 42 (1.654)  
2
(.079)  
2 (9)  
2 x ) = 8 (.31
11.4 (0.44
Section A-A  
2±0.05 (.079±0.002)  
2x (22-1)=36±0.05  
(1.654±0.002)  
Unit: mm (in.
Unit: mm (in.)  
n
ordering part number: FCN-086J110-G/101A-BCR  
FCN-086J110-G/111A-BCR (with pre-attached upper shield)  
shield plate  
ndimensions  
ndimensions  
4 x (11-1)=40 (1.575)  
4±0.2  
(0.157±0.008)  
ꢃꢈ[ꢈꢆꢅꢅꢄꢉ ꢃꢁꢈꢆꢅꢂꢍꢎꢍꢉ  
ꢃ“ꢁꢂꢋꢈ  
ꢁꢂꢅꢍꢎ“ꢁꢂꢁꢁꢌꢉ  
ꢃꢊꢂꢎ“ꢁꢂꢋꢈꢆꢅꢋꢁ“ꢁꢂꢁꢁꢌꢉ  
43.7±0.2 (1.720±0.008)  
ꢋ“ꢂꢅ  
2±.1  
(.079±.004)  
ꢆꢂꢁꢎꢀ“ꢂꢁꢁꢃꢉ  
ꢁꢂꢃꢁꢄꢁꢂꢅ  
ꢆꢁꢂꢁꢅꢇ  
0.40-0.1  
ꢁꢈꢈꢈꢈꢈꢈꢈꢈꢈ  
ꢄꢁꢂꢁꢁꢃ  
ꢉ
(0.0160-0.004 )  
ꢅ
0.7±0.1  
(0.0281±0.004)  
ꢁꢂꢁꢂꢁꢋꢌꢅ“ꢁꢂꢁꢁꢃꢉ  
1
ꢆꢁꢂꢁꢊꢀꢉ  
ꢅ“ꢁꢂꢅꢈꢆꢁꢂꢅꢊꢀ“ꢁꢂꢁꢁꢃꢉ  
ꢋ“ꢁꢂꢅꢁꢎꢀ“ꢁꢂꢁꢁꢃꢉ  
(0.039)  
1±0.1 (0.139±0.004)  
2±0.1(0.079±0.004)  
ꢋꢈ[ꢈꢆꢋꢋꢄꢅꢉ ꢃꢋꢇꢍꢃꢉ  
ꢃꢊꢂꢅꢍꢈ0ꢂꢈꢆꢅꢂꢇꢀꢀꢉ  
2 x (22-1)=42(1.654)  
43.15 MAX.  
(1.699)  
Unit: mm (in.)  
nit: mm (in.)  
n
ordering part number:  
n
ordering part number:  
FCN-086J110-G/VSD-BCR (without key, top  
shield plate)  
FCN-086J110-G/MSD-BCR (without key,  
bottom shield plate)  
Specifications  
Dimensions are in millimeters (inches)  
subject to change  
www.fcai.fujitsu.com  
Download from Www.Somanuals.com. All Manuals Search And Download.  
15  
Fcn-086 / 087 series  
SOCKET: 125 CONTACTS  
ndimensions  
1.890)  
2 (.079)  
10.95 (0.431)  
2
3.7  
(0.146)  
3.4  
2.35  
(.093) )  
(0.134)  
e
d
nmounting hole layout  
b
Thickness: 1.4 to 2.0 mm (.055 to .220 in.)  
Drill hole Diameter: ∅0.7±0.025 mm (.028 in.)  
Through hole diameter (after plating):  
∅0.6±0.05 mm (.024)  
50 (1.969)  
2 x (25-1) = 48 (1.890)  
2 (.079)  
2
(.079)  
2 x (58 5)  
11.4 (9)  
SA  
2±0.05 (.079±0.002)  
2x (25-1)=48±0.1  
(1.890±0.004)  
Unit: mm (in.)  
Unit: mm (in.)  
n
ordering part number: FCN-086J125-G/101-BCR  
FCN-086J125111-BCR (with pre-attached upper shield)  
shield plate  
ndimensions  
ndiensions  
4 x (13-1)=48 (1.890)  
4 12-1)=44 (1.732)  
4±0
4±0.2  
(0.157±0.008)  
(0.157±0.00
49.7±0.2 (57±0.008)  
49.7±0.2 (1.957±0.008)  
2±.1  
2±.1  
(.079±.004
(.079±.004)  
0.40-0.1  
0.40-0.1  
(0.0160-0.004  
)
(0.0160-0.004  
)
1(0.039)  
1
0.7±0.1  
(0.0281±0.004)  
0.7±0.1  
(0.0281±0.004)  
(0.039)  
1±0.1 (0.139±0.004)  
2±0.1(0.079±0.004)  
1±0.1 (0.139±0.004)  
2±0.1(0.079±0.004)  
2 x (25-1)=48(1.890)  
2 x (25-1)=48(1.890)  
49.15 MAX.  
(1.935)  
49.15 MAX.  
(1.935)  
Unit: mm (in.)  
Unit: mm (in.)  
n
ordering part number:  
n
ordering part number:  
FCN-086J125-G/LSD-BCR (bottom shield plate)  
FCN-086J125-G/USD-BCR (top shield plate)  
Specifications  
Dimensions are in millimeters (inches)  
subject to change  
www.fcai.fujitsu.com  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢀ6  
Fcn-086 / 087 series  
coding Key  
ndimensions  
ndimensions  
9.2 (0.362)  
8.9 (0.350)  
n
ordering part number:  
FCN-086B1247  
n
n
ordering part number:  
FCN-086A3568  
Quanties: 50 pieces/package; minium order quanity: 500 piecs  
combination oF coding Keys  
Plug  
Plug  
Jack  
Jack  
Color  
Color  
Nut brown  
Reseda green  
4578  
4567  
3567  
3457  
2348  
1346  
1258  
1248  
1247  
1236  
1238  
1248  
1268  
1567  
2578  
3467  
3567  
3568  
Ultramarine  
blue  
Slate gray  
Strawberry  
red  
Antique pink  
Pastel orange  
Olive yellow  
Brilliant blue  
n
ordering part numbers:  
Plug Coding Key: FCN-086A****  
Jack Coding Key: FCN-086B****  
****: Add Coding Key number: eg: FCN-086A1268  
Specifications  
subject to change  
Dimensions are in millimeters (inches)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
www.fcai.fujitsu.com  
ꢀ7  
Fcn-086 / 087 series  
Fujitsu Components International Headquarter Offices  
Japan  
europe  
Fujitsu Component Limited  
Gotanda-Chuo Building  
3-5, Higashigotanda 2-chome, Shinagawa-ku  
Tokyo 141, Japan  
Fujitsu Components Europe B.V.  
Diamantlaan 25  
2132 WV Hoofddorp  
Netherlands  
Tel: (81-3) 5449-7010  
Fax: (81-3) 5449-2626  
Email: [email protected]  
Web: www.fcl.fujitsu.com  
Tel: (31-23) 5560910  
Fax: (31-23) 5560950  
Email: [email protected]  
Web: emea.fujitsu.com/components/  
North and South America  
Fujitsu Components America, Inc.  
250 E. Caribbean Drive  
Sunnyvale, CA 94089 U.S.A.  
Tel: (1-408) 745-4900  
Asia Pacific  
Fujitsu Components Asia Ltd.  
102E Pasir Panjang Road  
#01-01 Citilink Warehouse Complex  
Singapore 118529  
Fax: (1-408) 745-4970  
Tel: (65) 6375-8560  
Email: [email protected]  
Web: http://us.fujitsu.com/components/  
Fax: (65) 6273-3021  
Email: [email protected]  
Web: http://www.fujitsu.com/sg/services/micro/components/  
©2007 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective  
owners.  
Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our  
products Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice.  
Rev. August 15, 2007  
Specifications  
subject to change  
Dimensions are in millimeters (inches)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
www.fcai.fujitsu.com  
ꢀ8  

EdgeStar Ice Maker IB1000SS User Manual
Elation Professional Stereo Amplifier MAGIC 260 User Manual
Extron electronic Universal Remote VCM 100 AAP User Manual
Fisher Price Baby Toy T7159 User Manual
Fisher Price Motorized Toy Car K3115 User Manual
GE Dishwasher GHDA300 User Manual
GE Oven ZSA2201 User Manual
Global Machinery Company Nail Gun ATBR1650K User Manual
GN Netcom Cordless Telephone GN7170 User Manual
GN Netcom Network Card GN 9330 User Manual