1.1 Checking the Contents of the
Download from Www.Somanuals.com. All Manuals Search And Download.
Trademarks
■ Liability Note
Microsoft and Window are registered trademarks of
Microsoft Corporation in the United States and/or other
countries.
ISIS and QuickScan are trademarks or registered
trademarks of EMC Corporation in the United States.
Adobe, the Adobe logo, and Acrobat are either
registered trademarks of Adobe Systems Incorporated
in the United States and/or other countries.
Other product names are the trademarks or registered
trademarks of the respective companies.
READ ALL OF THIS MANUAL CAREFULLY
BEFORE USING THIS PRODUCT. IF THIS
PRODUCT IS NOT USED CORRECTLY,
UNEXPECTED INJURY MAY BE CAUSED TO
USERS OR BYSTANDERS.
Also, keep this manual in a safe place so that it can be
easily referred to during use of this product.
While all efforts have been made to ensure the
accuracy of all information in this manual, PFU
assumes no liability to any party for any damage
caused by errors or omissions or by statements of any
kind in this manual, its updates or supplements,
whether such errors are omissions or statements
resulting from negligence, accidents, or any other
cause. PFU further assumes no liability arising from
the application or use of any product or system
described herein; nor any liability for incidental or
consequential damages arising from the use of this
manual. PFU disclaims all warranties regarding the
information contained herein, whether expressed,
implied, or statutory.
How Trademarks Are Indicated In This
Manual
References to operating systems (OS) and applications
are indicated as follows:
®
®
Microsoft Windows 2000
Professional operating system.
Windows 2000
®
®
Microsoft Windows XP
Professional operating system
(32/64-bit),
Windows XP
®
®
Microsoft Windows XP Home
Edition operating system.
Use in High-safety Applications
This product has been designed and manufactured on
the assumption that it will be used in office, personal,
domestic, regular industrial, and general-purpose
applications. It has not been designed and
®
®
Microsoft Windows
Windows Server
2003
Server™ 2003 Standard Edition
operating system (32/64-bit).
®
®
manufactured for use in applications (simply called
"high-safety applications" from here on) that directly
involve danger to life and health when a high degree of
safety is required, for example, in the control of nuclear
reactions at nuclear power facilities, automatic flight
control of aircraft, air traffic control, operation control
in mass-transport systems, medical equipment for
sustaining life, and missile firing control in weapons
systems, and when provisionally the safety in question
is not ensured. The user should use this product with
adopting measures for ensuring safety in such high-
safety applications. PFU LIMITED assumes no
liability whatsoever for damages arising from use of
this product by the user in high-safety applications, and
for any claims or compensation for damages by the
user or a third party.
Microsoft Windows Vista™
Home Basic operating system
(32/64-bit),
Windows Vista
®
®
Microsoft Windows Vista™
Home Premium operating
system (32/64-bit),
®
®
Microsoft Windows Vista™
Business operating system
(32/64-bit),
®
®
Microsoft Windows Vista™
Enterprise operating system
(32/64-bit),
®
®
Microsoft Windows Vista™
Ultimate operating system
(32/64-bit).
Where there is no distinction between the different
versions of the above operating system, the general
term "Windows" is used.
About the Use of Mercury
f
Lamp(s) inside this product contain
mercury and must be recycled or
disposed of according to local, state, or
federal laws.
g
H
®
®
Adobe Acrobat
Adobe Acrobat
All the descriptions in this manual assume the usage of
Adobe Acrobat bundled with this product. However,
Adobe Acrobat may be upgraded without notice. If the
descriptions differ from the screens actually displayed,
refer to the Acrobat’s "Help."
To avoid unexpected injuries:
•Do not put the substance contained in the lamp in
your mouth as it has mercury.
•Do not breathe the chemical liquid contained in the
scanner lamps.
•Do not incinerate, crush, or shred the lamps or
scanner parts.
fi-6140/fi-6240 Image Scanner Getting Started
ii
Download from Www.Somanuals.com. All Manuals Search And Download.
Manufacturer
Screen Examples In This Manual
PFU LIMITED
International Sales Dept., Imaging Business Division,
Products Group
Solid Square East Tower, 580 Horikawa-cho, Saiwai-
ku, Kawasaki-shi Kanagawa 212-8563, Japan
Phone : (81-44) 540-4538
The screen examples in this manual are subject to
change without notice in the interest of product
improvement. If the actual displayed screen differs
from the screen examples in this manual, operate by
following the actual displayed screen while referring to
the User's Manual of the scanner application you are
using.
The screenshots in this manual were captured from
FUJITSU TWAIN32 scanner driver, ScandAll PRO
Image Capturing Utility Software, FUJITSU ISIS
scanner driver, QuickScan Pro™ image capturing
All Rights Reserved. Copyright © PFU LIMITED 2007
About Maintenance
The user must not perform repairs on this scanner.
Contact the store where you purchased the scanner or
an authorized FUJITSU Image Scanner service
provider to make repairs to this product.
®
®
software and Adobe Acrobat .
■ Safety Precautions
Warning Indications Used In This Manual
This indication alerts operators to an
operation that, if not strictly observed,
may result in severe injury or death.
Do not damage the AC cable.
A damaged AC cable may cause fire or electric shock.
Do not place heavy objects on AC cables, or pull,
bend, twist, heat, damage or modify AC cables.
Do not use damaged AC cables or power plugs, or
install any cables or power plugs to loose wall
sockets.
This indication alerts operators to an
operation that, if not strictly observed,
may result in safety hazards to
personnel or damage to equipment.
Use only specified AC cables and connector
cables.
Symbols Used In This Manual
Use only specified AC cables and connector cables.
Failure to use the correct cables might cause electric
shock and/or equipment failure.
Please don’t use the AC cable provided with this
scanner for other devices, since this might cause
equipment failure and other troubles or an electric
shock.
This symbol alerts operators to particularly
ATTENTION
important information. Be sure to read this
information.
This symbol alerts operators to helpful advice
regarding operation.
HINT
Make sure to ground the scanner.
A TRIANGLE symbol indicates that special care
and attention is required.
The drawing inside the triangle shows the
specific caution.
Make sure to ground to avoid electric shock.
Be sure to ground before plugging into a power outlet.
Unplug from the outlet before removing the ground
connection.
Use this scanner only at the indicated power
voltage. Do not connect to multiple-power
strips.
A CIRCLE with a diagonal line inside shows
action which users may not perform.
The drawing inside or under the circle shows the
specific action that is not allowed.
Use this scanner only at the indicated power voltage
and current. Improper power voltage and current
might cause fire or electric shock. Do not connect to
multiple-power strips.
Outline characters on a colored background show
instructions users should follow.
R
It may also include the drawing that shows the
specific instruction.
Do not touch the AC cable with wet hands.
Do not touch the power plug with wet hands. Doing so
might cause electric shock.
Warning Label
The glass surface inside the ADF becomes hot
during the operation. Be careful not to touch the
glass surface inside the ADF.
Wipe any dust from the power plug.
Wipe off any dust from metal parts on the power plug
or metal fittings with a soft, dry cloth. Accumulated
dust might cause fire or electric shock.
Do not install the device in locations that
has oil smoke, steam, humidity, and dust.
ATTENTION
Do not install the scanner in locations subject to oil
smoke, steam, humidity, and dust. Doing so might
cause a fire or electric shock.
Do NOT remove from the scanner, stain or scratch the
warning labels.
iii
Download from Www.Somanuals.com. All Manuals Search And Download.
Turn the scanner OFF if it is damaged.
Avoid any contact when scanner is in use.
If the scanner is damaged for any reason, turn the
scanner off and unplug the power cable. Contact the
store where you purchased the scanner.
Avoid touching any scanner mechanism during
scanning since this may cause injuries.
Do not use the scanner immediately after
moving it from a cold place into a warm
room.
Do not put liquids inside the scanner.
Do not insert or drop metal objects in to the scanner.
Do not scan wet documents or documents with paper
clips or staples. Do not splash or allow the scanner to
get wet.
If foreign objects (water, small metal objects, liquids,
etc.) get inside the scanner, immediately turn off the
scanner and disconnect the power plug from the
power outlet. Then, contact the store where you
bought the scanner or the Maintenance Service
Center. Pay particular attention to this warning in
households where there are small children.
Do not use the device immediately after moving it
from a cold place into a warm room. Condensation
may occur, which might lead to scanning errors. Let
the device dry about one or two hours before you use
it.
Before moving the scanner, disconnect the
power plug from the power outlet.
Do not move the scanner with the power and interface
cables connected as this can damage the cables,
which can later cause fire, electric shock as well as
injury.
Unplug the scanner when a trouble occurs.
Immediately unplug the scanner when a trouble
occurs.
Never cut the ground connection until the scanner is
unplugged from the power outlet.
Before moving the scanner, be sure to disconnect the
power plug from the power outlet, and all other data
cables.
Make sure that the floor is free of any obstructions.
Do not touch the inside of the scanner
unless necessary.
Protect the scanner from static electricity.
Install the scanner away from strong magnetic fields
and other sources of electronic noise. Also, protect
the scanner against any static electricity, which can
cause the scanner to malfunction.
Do not take apart or modify the scanner. The inside of
the scanner contains high-voltage components.
Touching these components might cause electric
shock or fire.
Do not use aerosol sprays near the scanner.
Do not use the scanner if you smell a
strange odor.
Do not use aerosol sprays to clean the scanner.
Aerosol sprays can blow dirt and dust inside the
scanner, resulting in scanner failure or malfunction.
If you detect heat coming from the device or detect
other problems such as smoke, strange smells or
noises, immediately turn off the scanner and then
disconnect its power plug. Make sure that any smoke
coming from it has stopped, before contacting the
store where you bought the scanner or an authorized
FUJITSU scanner service provider.
Disconnect the power plug from the power
outlet when the scanner is not used for a
long period of time.
When the scanner is not going to be used for a long
period of time, be sure to disconnect the power plug
from the power outlet for safety.
Do not install the scanner in the direct
sunlight.
Do not install the scanner under direct sunlight or near
heating apparatus. Doing so might cause excessive
heat to build up inside the scanner, which can cause
scanner trouble or even fire. Install the scanner in a
well-ventilated location.
Do not install the scanner on unstable
surfaces.
Make sure that the scanner is installed on a flat, level
surface and that none of its parts extend beyond the
surface top, such as a desk or table. Do not install the
scanner on unstable surfaces. Install the scanner on a
level surface that is free of vibration to prevent it from
falling.
Before moving the scanner, make sure the
transport lock is locked.
When moving the scanner, be sure to lock the
transport lock in order to prevent damage to the
scanner.
Install the scanner on a strong surface that will
support the weight of the scanner and other devices.
Do not block the ventilation ports.
Do not block the ventilation ports. Blocking the
ventilation ports generates heat inside of scanner,
which may result in fire or scanner failure.
Do not place heavy objects or climb on top
of the scanner.
Do not place heavy objects on the scanner or use the
scanner's surface top to perform other work. Improper
installation might cause injuries and equipment
failure.
Firmly insert the power plug.
Firmly insert the power plug as far it can go into the
power outlet.
fi-6140/fi-6240 Image Scanner Getting Started
iv
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter1 PREPARING THE SCANNER
1.1 Checking the Contents of the
Scanner Package
■ Inside
[fi-6240]
When you open the scanner package, make sure it contains all
the parts listed in the package contents list that is included in
the package box.
Document cover
If any parts are missing or defective, contact the dealer you
purchased the scanner or an authorized Fujitsu scanner
service provider. Handle the scanner and accessories with
care.
Document holding pad
Document bed
1.2 Names of Parts
This section describes the names of parts.
■ Front side
[fi-6140]
Paper chute extension 2
Paper chute extension 1
■ Rear side
[fi-6140]
ADF paper chute
Side guide
Automatic document
feeder (ADF)
ADF open lever
Operator panel
Stacker
Stacker extension 1
DC inlet
Security
Slot
SCSI ID
switch
Stacker extension 2
USB connector
EXT connector
(For Imprinter
connection)
SCSI connector
[fi-6240]
[fi-6240]
Paper chute extension 2
Paper chute extension 1
ADF paper chute
Side guide
Automatic Document
Feeder (ADF)
ADF open lever
Operator panel
Flatbed
Security
Slot
SCSI ID
switch
DC inlet
Stacker
USB connector
SCSI connector
Stacker extension
ꢀTransport lock switch
1
Download from Www.Somanuals.com. All Manuals Search And Download.
■ Removable Parts
Name
Function
The following shows the parts that can be removed from the
scanner.
Function Number Display
Indicates the Function
Number and error status.
For details, refer to
Can be
ADF paper chute
"Indications on the Function
removed
Number Display" below.
Buttons
Function
Changes the Function
activated by the Send to
button (*).
Can be
removed
Brake roller
Send to
• Launches the linked application
software (*).
• Resets an error.
Pick roller
Scan/Stop
• Launches a linked application
software.
[fi-6240 only]
Document cover
• Resets an error.
• Cancels ongoing scanning.
Power
Check
Power
Turns on and off the scanner.
Blinks to indicates an error.
LED
Stays illuminated when the
scanner is turned on.
*) About the settings on the launcher, refer to FUJITSU
TWAIN32 scanner driver help and the "fi-6140/fi-6240
Operator’s Guide" in the Setup CD-ROM.
1.3 Operator Panel
The operator panel is located on the right side of the scanner.
This panel is comprised of a Function Number Display, four
buttons, and a LED.
■ Indications on the Function
Number Display
Indication
8
Descriptions
Check LED
Check
Function Number
Lights only one time upon turning on the
scanner.
Display
Function
Function button
Send to
P
0
1
Indicates that the scanner has been turned
ON and is being initialized.
Send to button
Scan
/Stop
Scan/Stop button
Indicates that initialization will soon be
completed.
Power
Power button/LED
Indicates that initialization has been
completed successfully.
This status is called "Ready Status."
J
U
Indicates that a recoverable error occurred
during scanning with the image scanner.
"U" or "J" and an "error number" is
displayed alternately. When an error is
indicated, press the [Scan] or [Send to]
button to return to the Ready Status ("1").
E
F
C
H
A
L
Indicates that an abnormality (alarm)
occurred in the image scanner during its
initialization or during scanning.
"E", "F", "C", "H", "A", or "L" and an
"alarm number" is displayed alternately.
When the alarm number is displayed, press
the [Scan] or [Send to] button to return to
the Ready Status.
When an alarm is indicated, turn off the
scanner once, and then turn it on. If the
alarm persists, contact your service
engineer, the store where you purchased
the scanner, or an authorized service
provider.
fi-6140/fi-6240 Image Scanner Getting Started
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter2 INSTALLATION OF THE SCANNER
1) Connect the AC cable to the AC adapter.
2.1 Installing the Scanner
1. Place the scanner at its installation site.
For details on the scanner's dimensions and required
installation space, refer to chapter 9 "Installation
Specifications" of "fi-6140/fi-6240 Operator’s Guide"
in the Setup CD-ROM.
For fi-6140, go to Step 3.
2. Unlock the Transport lock.
The carrier unit inside the fi-6240 is fixed in place with
2) Connect the AC adapter connector to the scanner’s DC
the transport lock to prevent the scanner from being
inlet.
damaged during transportation.
To unlock the transport lock, slide the transport lock
switch on the scanner front.
Release
Lock
3) Plug the AC cable into an outlet. If you want to plug it
into a two-slot outlet, use the supplied adapter plug.
3. Attach the ADF paper chute.
Hold the ADF paper chute and insert its tabs into the
corresponding slots in the scanner as shown in the next
figure below. Let the ADF paper chute down to fit into
position.
The Side guides of the ADF paper chute have to face
up.
ATTENTION
Before plugging the adapter plug into an outlet, be sure to
establish a ground.
ADF paper chute
HINT
The Function Number Display and LED of the operator panel
on the scanner may flash for an instant when the AC cable is
plugged into an outlet. This is a phenomenon due to the
initial diagnosis, but not a failure.
2
2.2 Connecting the Scanner to Your
PC
1
Side guide
Connect either with the USB cable or the SCSI cable.
Tab
ATTENTION
This scanner is provided with two interfaces: Ultra SCSI and
USB 2.0 /1.1. Connect only one of the USB or SCSI cable.
4. Connect the AC adapter.
ATTENTION
Use only the supplied AC adapter.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Insert the SCSI cable into the SCSI connector of the
scanner until both sides click.
■
Connecting with the USB Cable
1. Connect the USB cable to the USB connector.
2. Connect the other end of the cable to your
computer.
2. Connect the other end of the USB cable to the PC.
ATTENTION
ATTENTION
•
•
•
Be sure to use the USB cable which comes as an
accessory with this scanner.
Scanning operation with commercially available cables is
not guaranteed.
When connecting to an USB hub, use the first stage USB
hub that is closest to the computer. If you use the second
or later hub stages, the scanner may not operate
correctly.
If you connect the scanner with USB 2.0, it is required
that the USB port and Hub are compliant with USB 2.0.
The scanning speed may slow down if it is connected
with USB1.1.
Be careful not to bend the pins of the SCSI connector when
connecting to the scanner.
HINT
The SCSI ID initially set at the factory is [5]. If the SCSI ID of
another SCSI device is set to the same ID, either change the
scanner's SCSI ID or SCSI ID of the other SCSI device. For
details on how to change the SCSI ID, refer to "Setting the
■
Setting the SCSI ID
The factory initial setting for SCSI ID is [5].
■
Connecting with the SCSI Cable
1. Press the Power button at least for two seconds to
turn off the scanner.
When using the scanner with a SCSI interface, the following
SCSI cable and SCSI card must be purchased.
2. Set the SCSI ID using the SCSI ID switch on the
back of the scanner.
• SCSI cable:
Use a cable which complies with a 50 Pin Contact
Shielded High-Density SCSI Device Connector for
Ultra SCSI.
• SCSI card:
5
Find the recommended SCSI card information in the
Fujitsu web site (FAQ).
0
Click
ATTENTION
ID No.
0 to 7
8, 9
Description
Can be set as the ID
•
•
After connecting the SCSI cable, turn the scanner on.
In a SCSI daisy chain formation, connect the scanner so
that it is the terminated device.
Works with the factory default value
(SCSI ID = 5).
3. Press the Power button to turn on the scanner.
When the scanner is turned ON, the SCSI ID set at
Step 2 is enabled.
fi-6140/fi-6240 Image Scanner Getting Started
4
Download from Www.Somanuals.com. All Manuals Search And Download.
• Connect the scanner correctly to your computer.
2.3 Installing the Scanner Software
To scan documents with this scanner, you must install a
scanner driver for operating the scanner as well as
scanning software (hereinafter called the "application") for
launching the driver and performing a scan.
The scanner drivers and application provided with the scanner
are as follows:
HINT
For details on how to connect the scanner, refer to section
• Uninstall any older versions of FUJITSU TWAIN
32 if they are already installed on your computer.
• Scanner driver:
ATTENTION
Uninstall [Scanner Utility for Microsoft Windows] from [Add/
Remove Programs] on the control panel.
• Scanning application:
(Supports both FUJITSU TWAIN 32 and ISIS)
Install either of the scanner drivers above and ScandAll PRO.
■
Installing the FUJITSU TWAIN32
Scanner Driver
ATTENTION
HINT
Be sure to install a scanner driver, FUJITSU TWAIN 32 or
FUJITSU ISIS for using VRS Image Processing Option, also.
Installing any one of the scanner drivers will also install
"Software Operation Panel," which is needed to change the
scanner settings.
Screenshots taken in Windows XP are used as examples.
The displayed windows and operations may slightly vary
depending on the operating system you are using.
1. Press the Power button to turn on the scanner.
2. Turn on your computer and log on to Windows.
In addition, this scanner is bundled with the following
software applications. To make full use of the scanner, try to
use them together.
ATTENTION
When errors occur in the scanner, you can view
information about what happened to the scanner and
how to solve the problem on the screen of the
personal computer.
Be sure to log on as a user with "Administrator" privileges.
3. When the scanner is automatically detected, [Found
New Hardware Wizard] or [Add/Remove Hardware
Wizard] dialog box appears. Click [Cancel] to close
the Wizard dialog box.
• Image Processing Software Option
This is an optional application for performing binary
image processing on scanned images.
• QuickScan Pro™
This application complies with the ISIS standard and
it is used for scanning images. This
scanner is accompanied with a trial version of this
application.
This is an industry-standard application used for
creating, managing, and making use of digitalized
documents in PDF format.
How to install drivers and applications is described below.
4. Insert the Setup CD-ROM into the CD drive.
⇒ <SETUP DISK START UP SCREEN> appears.
For FUJITSU TWAIN32 Scanner Driver
ATTENTION
FUJITSU TWAIN 32 is a TWAIN-compliant scanner driver.
To use this scanner with any TWAIN-compatible
application, install FUJITSU TWAIN 32, following the
procedure below.
This screen may not appear if the "AutoPlay" setting is set to
off. In this case, find "Install.exe" in the CD-ROM using
"Explore" or "My Computer" to start installation.
■
Preparation
Do the following before installing the application:
• Unpack the Setup CD-ROM, but do not insert
the Setup CD-ROM into the CD drive yet.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Click [INSTALL PRODUCTS], and then click
[TWAIN Driver].
ATTENTION
•
•
Depending on the state of the operating system, the
computer may shut down and restart. In this case, the
computer detects the scanner when it starts up. Do not
remove the Setup CD-ROM from the CD drive until the
computer completely starts up again.
Depending on the operating system you are using, you
may need to do the following.
Windows 2000:
If you see the [Digital Signature not Found] dialog box,
click the [Yes] button.
Windows Vista:
If you see the [Found New Hardware] dialog box, select
[Locate and install driver software], and then in the
[User Account Control] dialog box, click the [Continue]
button, if it is displayed.
6. The Error Recovery Guide Installation dialog box
appears.
The installation of FUJITSU TWAIN 32 is complete. Next,
Error Recovery Guide is an application with which
you can view on-screen information for troubleshoot-
ing errors that may occur in the scanner. This guide
helps solve problems, so select [Yes] to install it. You
may also choose to install it later.
ATTENTION
To make sure that FUJITSU TWAIN 32 is successfully
installed, perform a scan with a TWAIN-compliant
application such as ScandAll PRO. For information about
how to scan with ScandAll PRO, refer to section "2.4
ATTENTION
After you select [Yes] for installing Error Recovery Guide, the
[Choose Setup Language] dialog box appears. Select a
language and follow the on-screen instructions. The Error
Recovery Guide dialog box is automatically displayed when
the installation is complete. Wait until the installation of the
TWAIN driver starts.
For FUJITSU ISIS Scanner Driver
FUJITSU ISIS is an ISIS-compliant scanner driver.
To use this scanner with any ISIS-compatible
application, install FUJITSU ISIS, following the procedure
below.
7. Select a language for the installation on the
[Choose Setup Language] dialog box, and then
click the [Next] button.
■
Preparation
Do the following before installing the driver:
• Unpack the Setup CD-ROM, but do not insert
the Setup CD-ROM into the CD drive yet.
• Connect the scanner correctly to your computer.
HINT
For details on how to connect the scanner, refer to section
■
Installing the FUJITSU ISIS
Scanner Driver
HINT
8. Install the driver, following the on-screen
instructions.
Screenshots taken in Windows XP are used as examples.
The displayed windows and operations may slightly vary
depending on the operating system you are using.
9. When you see the [InstallShield Wizard Complete]
dialog box, click the [Finish] button.
1. Press the Power button to turn on the scanner.
2. Turn on your computer, and then log on to
Windows.
ATTENTION
Be sure to log on as a user with "Administrator" privileges.
fi-6140/fi-6240 Image Scanner Getting Started
6
Download from Www.Somanuals.com. All Manuals Search And Download.
3. When the scanner is automatically detected, [Found
New Hardware Wizard] or [Add/Remove Hardware
Wizard] dialog box appears. Click the [Cancel]
button to close the Wizard dialog box.
8. Install the driver, following the on-screen
instructions.
9. When you see the [InstallShield Wiizard Complete]
dialog box, click the [Finish] button.
Your computer will restart and detect the scanner. Do not
remove the Setup CD-ROM from the CD drive until your
computer completely starts up again.
4. Insert the "Setup CD-ROM" into the CD drive.
⇒ <SETUP DISK START UP SCREEN> appears.
ATTENTION
ATTENTION
This screen may not appear if the "AutoPlay" setting is set to
off. In this case, find "Install.exe" in the CD-ROM using
"Explore" or "My Computer" and execute it.
Depending on the operating system you are using, you
may need to do the following.
Windows 2000:
If you see the [Digital Signature not Found] dialog box, click
[Yes].
Windows Vista:
5. Click [INSTALL PRODUCTS], and then click [ISIS
Driver].
If you see the [Found New Hardware] dialog box, select
[Locate and install driver software], and then in the [User
Account Control] dialog box, click the [Continue] button, if it
is displayed.
The installation of FUJITSU ISIS is complete.
ATTENTION
To make sure that FUJITSU ISIS is successfully installed,
perform a scan with a ISIS-compliant application such as
ScandAll PRO. For information about how to scan with
ScandAll PRO, refer to section "2.4 Checking Scanner
6. Error Recovery Guide Installation dialog box
appears.
ScandAll PRO
Error Recovery Guide is an application with which you
can view on-screen information for troubleshooting
errors that may occur in the scanner. This guide helps
solve problems, so select [Yes] to install it. You may
also choose to install it later.
■
Installing ScandAll PRO
ScandAll PRO is software for scanning images, which is in
compliance with both TWAN/ISIS standards. Using
FUJITSU TWAIN 32 or FUJITSU ISIS together with
ScandAll PRO allows you to create document images.
ATTENTION
After you select [Yes] for installing Error Recovery Guide,
the [Choose Setup Language] dialog box appears. Select a
language and follow the on-screen instructions. The Error
Recovery Guide dialog box is automatically displayed
when the installation is complete. Wait until the installation
of the ISIS driver starts.
ATTENTION
Be sure to log on as a user with "Administrator" privileges.
1. Insert the Setup CD-ROM into the CD drive.
⇒ <SETUP DISK START UP SCREEN> appears.
7. Select a language for the installation on the
[Choose Setup Language] dialog box, and then
click the [Next] button.
2. Click [INSTALL PRODUCTS], and then click
[ScandAll PRO].
7
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Select a language for the installation on [Choose
Setup Language] dialog box, and then click the [OK]
button.
4. Proceed with the installation, following the on-
screen instructions.
5. When the [InstallShield Wizard Complete] dialog
box appears, click the [Finish] button.
HINT
For information about the features of ScandAll PRO, refer to
Help topics in ScandAll PRO.
Error Recovery Guide
ATTENTION
"QuickScan Pro™" included in the Setup CD-ROM is a trial
version that can be executed 30 times before it is disabled.
If you wish to continue using this product, please consider
purchasing the full version. (When you install the trial
version, use the displayed Serial Number.)
If Error Recovery Guide is installed on your computer, you
can troubleshoot errors that may occur in the scanner by
simply following the on-screen instructions.
If you did not install Error Recovery Guide together with the
scanner driver, follow the procedure below to install it.
5. Install the application, following the on-screen
instructions.
1. Insert the Setup CD-ROM into the CD drive.
⇒ <SETUP DISK STARTUP SCREEN> appears.
HINT
2. Click [INSTALL PRODUCTS], and then click [Error
Recovery Guide].
For information about the features and operations of
QuickScan Pro™, refer to "QuickScan Overview" or
"QuickScan Help."
Form the [start] menu, select [All Programs] D [EMC
Captiva] D [QuickScan], and then select a desired file.
3. Select a language for the installation in the [Choose
Setup Language] dialog box, and then click the [OK]
button.
4. Install the application, following the on-screen
instructions.
®
®
Adobe Acrobat
5. When you see the [InstallShield Wizard Complete]
dialog box, click the [Finish] button.
Install Adobe Acrobat from the "Adobe Acrobat CD-ROM"
provided with this scanner.
Image Processing Software Option (Trial)
HINT
For details on the installation of Image Processing Software
Option (Trial Version), refer to the "Image Processing
Software Option User’s Guide."
Adobe Acrobat is needed to display manuals.
* You do not have to install Adobe Acrobat if it is already
installed on your computer.
1. Insert the "Adobe Acrobat CD-ROM" into the CD
drive.
QuickScan Pro™ (Trial)
⇒ The [Adobe Acrobat] dialog box appears.
QuickScan Pro™ is image capturing software based on the
ISIS standard. By using this software together with FUJITSU
ISIS, you can scan documents with the scanner. Follow the
procedure below to install the trial version of QuickScan
Pro™ that comes with this scanner.
ATTENTION
This dialog box may not appear if the "AutoPlay" setting is
set to off. In this case, find "AutoPlay.exe" in the CD-ROM
using "Explore" or "My Computer" and execute it.
ATTENTION
2. In the dialog box below, click the folder icon;
installation starts and the Setup dialog box appears.
Be sure to log on as a user with "Administrator" privileges.
1. Insert the Setup CD-ROM into a CD drive.
⇒ <SETUP DISK STARTUP SCREEN> appears.
2. Click [INSTALL PRODUCTS], and then click
[QuickScan Pro (Trial)].
3. In the [Welcome to the InstallShield Wizard for
QuickScan 4.5] dialog box, click the [Next] button.
4. Type in necessary information in the [Customer
Information] dialog box, and then click the [Next]
button.
fi-6140/fi-6240 Image Scanner Getting Started
8
Download from Www.Somanuals.com. All Manuals Search And Download.
3. In the dialog box below, click the [Next] button.
2.4 Checking Scanner Driver
Operation
This section explains how to check the operation of the
installed scanner driver by using ScandAll PRO.
Make sure that the scanner driver is installed properly,
following the procedure below.
■
Checking the Operation of the
Scanner Driver
1. Load the document on the scanner.
For information about how to load the document, refer
to section "2.2 Loading Documents on the ADF for
Scanning" in "fi-6140/fi-6240 Operator's Guide."
2. Launch ScandAll PRO.
4. Install the application, following the on-screen
instructions.
From the [start] menu, select [All Programs] D
[Fujitsu ScandAll PRO] D [Fujitsu ScandAll PRO].
HINT
3. In ScandAll PRO, select [Tool] on the menu, and
then select [Preferences].
For information about how to install Adobe Acrobat, refer to
"Read Me" that you can view when [Readme] is clicked in
the dialog box shown in Step 2.
For information about how to operate Adobe Acrobat, refer
to the Help topics in Adobe Acrobat.
ATTENTION
⇒ The [Setup] dialog box appears.
Notes for using Adobe Acrobat
4. On the [Scan] tab, select a driver.
When scanning a paper document and converting the
image to PDF using Adobe Acrobat, unexpected images
may be output when:
To check the operation of FUJITSU TWAIN 32, select
[TWAIN].
To check the operation of FUJITSU ISIS, select [ISIS].
1. Setting "Edge Shadow Removal" in Acrobat, and setting
"Digital Endorser" or "Black Background" options in the
TWAIN driver at the same time. Letter strings embedded
in the image or the background may be missed.
Solution 1: Set "Edge Shadow Removal" to "OFF" or set
any option other than "Adaptive" for "Color/Grayscale"
and/or "Monochrome" under "Compression" by selecting
[File]D[Create PDF]D[From Scanner]D[Optimization
Options] in Acrobat.
Solution 2: Adjust the scanning density in the TWAIN
driver.
2. Setting "Adaptive" for "Color/Grayscale" and/or
"Monochrome" under "Compression" in Acrobat and
scanning in a resolution lower than the resolution
recommended for Acrobat.
Solution: Set OPTION to something other than
"Adaptive" under "Compression."
3. Scanning a document longer than the double letter
(11x17) or A3 size, when setting "Overscan" in the
TWAIN driver, the scan may fail.
Solution: When scanning a double letter (11x17) or A3
size of document, do not set "Overscan" in TWAIN driver.
*As for detailed usage and information on Acrobat, refer to
"Create a PDF file from a scanned document" in Acrobat
Help.
5. Click the [OK] button to close the [Setup] dialog
box.
6. In ScandAll PRO, select [Scan] on the menu, and
then select [Select Scanner].
ATTENTION
Support and User registration for Adobe products
For details, refer to the technical support information stored
in the [Customer Support] folder on Adobe Acrobat CD-
ROM. (Note that free person-to-person support is not
available for this is a bundled product.)
9
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Select a scanner in the displayed dialog box.
11. Configure scanner settings such as the resolution
and paper size.
To use FUJITSU TWAIN 32:
Select [FUJITSU fi-6140dj] or [FUJITSU fi-6240dj],
and then click the [Select] button.
To use FUJITSU TWAIN 32:
On the dialog box below, configure scan settings, and
then click the [OK] button.
To use FUJITSU ISIS:
Select [Fujitsu fi-6140] or [Fujitsu fi-6240dj] and then
click the [Select] button.
To use FUJITSU ISIS:
On the dialog box below, configure scanning settings,
and then click the [OK] button.
8. Select [Scan] on the menu, and then select [Scan
Settings].
9. In the [Scan Settings] dialog box, clear the [Save to
file] checkbox.
⇒ You are returned to the [Scan Settings] dialog box.
12. Click the [Scan] button.
HINT
When you are using FUJITSU TWAIN 32, you may see the
TWAIN Driver setup dialog box again. If so, click the [Scan]
button on the dialog box.
⇒ The document is scanned and the scanned image is
displayed in the [ScandAll PRO] window.
HINT
You only check the operation now, so you do not have to
save to file.
10. Click [Scanner Settings].
⇒ A setup dialog box appears for you to configure
scanner driver settings.
fi-6140/fi-6240 Image Scanner Getting Started
10
Download from Www.Somanuals.com. All Manuals Search And Download.
If the scanned document image is displayed in the window, it
means that the scanner driver is installed properly.
ATTENTION
Displays may vary depeinding on the operating system you
are using. Follow the on-screen instructions.
Examples:
In Windows 2000, the window and button names described
above are as follows:
For further information about how to scan documents, refer to
"fi-6140/fi-6240 Operator’s Guide" contained in the Setup
CD-ROM.
2.5 Uninstalling Supplied Programs
The following explains how to uninstall software applications
provided with the scanner.
•
[Add or Remove Programs] D [Add/Remove
Applications]
The [Changel/Remove] button D The [Add/Remove]
button
•
In Windows Vista, the window and button names described
above are as follows:
HINT
•
[Uninstall or Change a program] D[Uninstall or Change]
Screenshots taken in Windows XP are used as examples.
The displayed windows and operations may slightly vary
depending on the operating system you are using.
1. Start your computer.
ATTENTION
Be sure to log on as a user with "Administrator" privileges.
2. Exit all applications.
3. From the [start] menu, select [Control Panel] D [Add
or Remove Programs].
⇒ In the [Add or Remove Programs] dialog box, you
can view a list of installed applications.
4. Select an application you want to uninstall as
follows:
• To remove FUJITSU TWAIN 32, select
"Scanner Utility for Microsoft Windows."
• To remove ScandAll PRO,
select "Fujitsu ScandAll PRO V1.5."
• To remove FUJITSU ISIS,
select "Fujitsu ISIS Drivers."
• To remove Error Recovery Guide,
select "Error Recovery Guide."
• To remove Software Operation Panel, (Software
Operation Panel is automatically installed
together with FUJITSU TWAIN 32/ISIS),
select "Software Operation Panel."
• To remove QuickScan Pro™,
select "QuickScan."
ATTENTION
•
•
For information about how to uninstall Image Processing
Software Option (Trial version), refer to "Image
Processing Software Option User’s Guide."
For information about how to uninstall Adobe Acrobat,
refer to Adobe Acrobat "Read Me."
5. Click the [Change/Remove] button or the [Remove]
button.
6. When you see a confirmation dialog box, click the
[OK] button or the [Yes] button.
⇒ Upon clicking the button, uninstallation is
started.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix1 TROUBLESHOOTING
■ Troubleshooting checklist
Symptom
Check this item
Remedy
Push the power button.
Scanner does not turn on.
Have you pressed the power button on?
Are the AC cable and AC adapter
properly connected to the
scanner?
Correctly connect the AC cable and the AC adapter.
Disconnect the AC cable and the AC adapter from
the scanner, then connect them again.
If this does not restore the power supply, contact
the store where you purchased the scanner or an
authorized FUJITSU scanner service provider.
Is Windows normally started up?
Push the power button again after completely
starting up Windows.
Scanning does not start.
Are the documents loaded correctly on the Load the document correctly on ADF paper chute.
ADF paper chute?
Is the ADF closed completely?
Close the ADF completely.
Is the USB cable or SCSI cable properly Correctly connect the cable. (When a USB hub is
connected? used, check the hub's power supply.)
(When using SCSI interface) Is SCSI ID Set SCSI ID correctly by SCSI ID switch on rear of
set correctly?
scanner.
Does the Function Number Display
indicates an alarm or an error?
When the Function Number Display indicates an
alarm or an error, refer to chapter 6 "Troubleshoot-
ing" of "fi-6140/fi-6240 Operator’s Guide" for
removing the alarm or the error.
Does the alarm state remain displayed
Turn off and on the power button.
even after the scanner has been turned off If this does not eliminate the alarm state, contact the
and back on again?
store where you purchased the scanner or an
authorized FUJITSU scanner service provider.
fi-6140/fi-6240 Image Scanner Getting Started
AP-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix2 DAILY CARE
■ Locations and Cycle for Cleaning
Part to clean
Brake Roller
Standard Cleaning Cycle
When operating the scanner, the ADF’s inside glass
becomes very hot.
Clean these parts after every 5,000
sheets.
Pick roller
Feed rollers
Plastic rollers
Eject rollers
Glass
Before you clean inside the scanner, turn off its power
and unplug the AC adapter from the outlet. Wait for at
least 15 minutes.
Turn on the scanner when you clean the Feed rollers
or Eject rollers.
■ Cleaning Materials
ATTENTION
Cleaning
Materials
Parts
Number
Remarks
1 bottle
Moisten the cloth with
this fluid and wipe the
scanner clean. (*1)
The scanner must be cleaned more frequently if you scan
any of the following type of sheets:
Cleaner F1
PA03950-
0352
•
•
Documents of coated paper
Documents that are almost completely covered with
printed text or graphics
•
•
Chemically treated documents such as carbonless paper
Cleaning wipe
PA03950-
0419
24 sheets per pack
(*1)(*2)
Documents containing a large amount of calcium
carbonate
Lint-free dry cloth - Commercially available one
•
•
Documents written by pencil
*1: For details about the cleaning materials, contact the
FUJITSU scanner dealer where you purchased the
scanner.
*2: Pre-moistened with Cleaner F1, Cleaning Wipes are
used instead of moistened cloths.
Documents on which the toner is not fused sufficiently.
For details on cleaning the ADF, refer to section 4.3 "Clean-
ing the ADF" of "fi-6140/fi-6240 Operator’s Guide" on the
Setup CD-ROM.
■ Cleaning Method
The ADF must be cleaned with a lint-free cloth moistened
with the Cleaner F1.
ATTENTION
It may take long before the cleaner vaporizes if a large
quantity is used. When cleaning the scanner parts,
dampen a cloth with modest quantities of the cleaner. In
addition, wipe off the cleaner completely with a soft lint-
free cloth to leave no residue on the surface of the
cleaned parts.
AP-2
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix3 REPLACING CONSUMABLES
The following illustrations show the locations of the consum-
ables. For details, refer to chapter 4 "Replacing Consumables"
of "fi-6140/fi-6240 Operator’s Guide" on the Setup CD-
ROM.
During its operation, the inside glass of the ADF
becomes very hot.
■ Replacing the Brake Roller
2
Before replacing the consumables, turn its power off
and unplug the AC adapter from the outlet. Wait at
least 15 minutes.
1
3
■ Consumables and Replacement
Cycles
The followings are the specifications of consumables and
their recommended replacement cycles.
Standard
Replacement Cycle
Description
Parts No.
Brake roller
PA03540-0001 After 200,000 sheets or
one year
■ Replacing the Pick Roller
Pick roller
PA03540-0002 After 200,000 sheets or
one year
1
2
To purchase consumables, contact the store where you pur-
chased the scanner or an authorized FUJITSU scanner service
provider.
The replacement cycles above are rough guidelines when
2
using A4/Letter woodfree or wood containing paper 64 g/m
(17 lb). This cycle varies according to the type of the paper
used and how frequently the scanner is used and cleaned.
ATTENTION
Use only the designated consumables.
3
fi-6140/fi-6240 Image Scanner Getting Started
AP-3
Download from Www.Somanuals.com. All Manuals Search And Download.
fi-6140/fi-6240 Image Scanner Getting Started
P3PC-2052-01EN
Issue Date: October 2007
Issued by: PFU LIMITED
z Copying of the contents of this manual in whole or in part and
copying of the scanner application is prohibited under the copy-
right law.
z The contents of this manual are subject to change without notice.
z PFU LIMITED is not liable whatsoever for any damages resulting
from use of this scanner and procedures described in this manual,
profit due to defects, and any claims by a third party.
Download from Www.Somanuals.com. All Manuals Search And Download.
|