FMW42DS1
Mini-Dock
User’s Guide
Stylistic 3400
The Stylistic 3400 mini-dock allows you to transform
your pen tablet into a full-function desktop computer.
The mini-dock provides connectivity to a wide variety
of peripheral devices, including keyboard, mouse,
printer, LAN, and external monitor. The mini-dock is
designed for stationary counter or desktop use with
your Stylistic 3400 pen tablet.
Rear Panel Components
0
Following is a description and illustration of the rear
This user’s guide provides a brief description of the
mini-dock’s features and instructions on using it with
your Stylistic 3400 pen tablet.
Features
0
The mini-dock features a number of components,
interfaces, and connections that are described below
and illustrated in figures 1 thru 4.
Parallel Port
Video Port
Serial Port
Figure 2. Rear panel components
Front Components
0
You may use these components as follows:
Following is a description and illustration of the
mini-dock showing the front components. (Figure 1.)
Use the
To connect
Parallel Port
•a parallel printer or other
standard parallel device.
(Also called LPT port.)
Video Port
Serial Port
• a VGA or SVGA monitor.
System
Interface
•an external peripheral device
with a serial interface.
Connector
(Also called COMM port.)
Left-Hand Side Components
0
Built-in
Speaker
Following is a description and illustration of the
left-hand side components of the mini-dock. (Figure 3.)
Figure 1. Stylistic 3400 mini-dock
• Built-in Speaker: This speaker improves the clarity
of the sound from your pen tablet. When you use the
mini-dock with your pen tablet, the speaker inside the
Stylistic 3400 will be disabled.
• System Interface Connector: Use to connect to the
docking port of the Stylistic 3400 pen tablet. Once
connected, you will be able to use the peripheral
devices attached to the mini-dock.
Floppy Disk
Drive Port
LAN Port
Keyboard Port
DC Input
USB Port
Figure 3. Left-hand side components.
Stylistic 3400 is a trademark of Fujitsu PC Corporation © 2000 Fujitsu Personal Computer, Inc.
3/00
1 of 3
58-0712-00A
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Stylistic 3400’s Viewing Angle0
Your mini-dock allows you to adjust your Stylistic 3400
to a comfortable viewing angle. There are five positions
on the stand to which you can adjust the viewing angle
of your pen tablet. (Figure 6.)
Metal
Bail
Stand
Figure 5. Installing the Stylistic 3400
5. Turn on the peripherals attached to the mini-dock.
6. Press the Suspend/Resume button to resume Stylistic
3400 system operation.
Note: If the required driver software for a
connected peripheral device is not installed,
the device may not work or may work
incorrectly. Contact your local help desk or
refer to the documentation provided with
your peripheral device and install the driver
software at this time.
Figure 6. Adjusting the viewing angle
To adjust your pen tablet’s viewing angle:
1. Release the metal bail from the stand by firmly
pulling it up from the groove on the stand.
2. With one hand, hold and adjust the pen tablet to your
desired viewing angle; use your free hand to position
the metal bail in the appropriate groove on the stand,
then press until it snaps in place.
You can now use your Stylistic 3400 with the
peripheral devices connected to the mini-dock.
Removing the Stylistic 3400
0
Follow these steps to remove your pen tablet.
0
1. Suspend operation of your Stylistic 3400 by pressing
the Suspend/Resume button or by shutting down from
the Start menu.
2. Turn off peripheral devices that are connected to the
mini-dock.
3. Hold the base of the mini-dock with one hand, and
with your free hand, firmly hold and pull the Stylistic
3400 out of the mini-dock in a straight line.
4. Press the Suspend/Resume button to resume
operation of your Stylistic 3400.
Stylistic 3400 is a trademark of Fujitsu PC Corporation © 2000 Fujitsu PC Corporation
3/00
3 of 3
58-0712-00A
Download from Www.Somanuals.com. All Manuals Search And Download.
|