Fujitsu Laptop S6220 User Manual

Fujitsu LifeBook  
S Series  
BIOS Guide  
LifeBook S Series Model:  
S6220  
Document Date: 04/30/2004  
Document Part Number: FPC58-1147-01  
F U J I T S U C O M P U T E R S Y S T E M S  
Download from Www.Somanuals.com. All Manuals Search And Download.  
S
S e r i e s B I O S  
3. If an error message is displayed on the screen, and  
you want to enter the setup utility, press the [F2] key.  
4. When the setup utility starts with a fault present, the  
system displays the following message:  
Warning!  
Error message  
[Continue]  
5. Press any key to enter the setup utility. The system  
will then display the Main Menu with current  
parameters values.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
L i f e B o o k  
S
S e r i e s N o t e b o o k B I O S  
MAIN MENU – SETTING STANDARD SYSTEM PARAMETERS  
The Main Menu allows you to set or view the current  
system parameters. Follow the instructions for  
Navigating Through The Setup Utility to make any  
changes.  
*Note that actual drive labels shown may vary.  
System Time and System Date can also be  
set from your operating system without  
using the setup utility. Use the calendar  
and time icon on your Windows Control  
panel or double-click on the time in the  
system tray at the bottom right of the  
screen.  
The following tables show the names of the menu fields  
for the Main menu and its submenus, all of the options  
for each field, the default settings and a description of  
the field’s function and any special information needed  
to help understand the field’s use.  
PhoenixBIOS Setup Utility  
Main  
Advanced  
Security  
Boot  
Info  
Exit  
Item Specific Help  
System Time:  
System Date:  
[02:34:56]  
[04/21/2004]  
Adjust calendar clock.  
Primary Master  
[TOSHIBA MK6021GAS -(PM)]  
Secondary Master  
[MATSHITADVD-RAM UJ-820S -(SM)]  
<Tab>, <Shift-Tab>, or  
<Enter> selects field.  
Language:  
[English (US)]  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
F9 Setup Defaults  
F10 Save and Exit  
Enter Select  
Sub-Menu  
Figure 1. Main Menu  
Table 1: Fields, Options and Defaults for the Main Menu  
Note that the parameters listed below may differ, as determined by your system configuration.  
Menu  
Field  
Options  
Default  
Description  
System  
Time:  
–—  
–—  
Sets and displays the current time. Time is in a 24 hour  
format of hours:minutes:seconds with 2 digits for each.  
(HH:MM:SS). Example: 16:45:57. You may change  
each segment of the time separately. Move between  
the segments with the [Tab] key and/or [Shift] + [Tab]  
keys.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
M a i n M e n u  
Table 1: Fields, Options and Defaults for the Main Menu  
Note that the parameters listed below may differ, as determined by your system configuration.  
Menu  
Field  
Options  
Default  
Description  
System  
Date:  
–—  
–—  
Sets and displays the current date. Date is in a month/  
day/year numeric format with 2 digits each for month  
and day and 4 digits for year. (MM/DD/YYYY) for  
example: 10/16/2001. You may change each segment  
of the date separately. Move between the segments  
with the [Tab] key and/or [Shift] + [Tab] keys.  
Primary  
Master:  
Selects Primary  
Master submenu  
The product # of the  
Hard Drive  
Display the type of device on this ATA/ATAPI interface,  
if there is one. Pressing the Enter key selects the Pri-  
mary Master submenu allowing additional device con-  
figuration options for this interface.  
Secondary  
Master:  
Selects Secondary  
Master submenu  
The product  
number of the CD-  
ROM  
Display the type of device on this ATA/ATAPI interface,  
if there is one. Pressing the Enter key selects the Sec-  
ondary Master submenu allowing additional device  
configuration options for this interface  
Language:  
English (US)  
Japanese (JP)  
[English (US)]  
The default setting differs between the US/European  
and the Japanese model. Selects the display language  
for the BIOS.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
L i f e B o o k  
S
S e r i e s N o t e b o o k B I O S  
Primary Master Submenu of the Main Menu  
The Primary Master submenu identifies what ATA  
devices are installed.  
*Note that actual hard drive label shown may vary.  
Depending on the drive type, information such as cylinders,  
heads and sectors may also be displayed.  
PhoenixBIOS Setup Utility  
Main  
Primary Master [TOSHIBA MK6021GAS -(PM)]  
Item Specific Help  
Type:  
[Auto]  
LBA Format  
Select ATA/ATAPI drive  
installed here.  
Total Sectors:  
117210240  
Maximum Capacity:  
60012MB  
[Auto]  
The BIOS auto-types the  
drive on boot time.  
Multi-Sector Transfers:  
LBA Mode Control:  
[16 Sectors]  
[Enabled]  
PIO Transfer Mode:  
DMA Transfer Mode:  
[Multiword DMA 2]  
[Disabled]  
Except [Auto]  
You enter parameters of  
the drive.  
[None]  
The drive is disabled.  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
Enter Select Sub-Menu  
F9 Setup Defaults  
F10 Save and Exit  
Figure 2. Primary Master Submenu  
Table 2: Fields, Options and Defaults for the Primary Master Submenu of the Main Menu  
Menu Field  
Options  
Default  
Description  
Type:  
Auto  
[Auto]  
Selects the ATA/ATAPI device type. Select Auto to have the type automati-  
cally identified by the BIOS at POST. If None is selected, all of the following  
Set-up items do not appear. Select CD-ROM if a CD-ROM drive is installed at  
this connection. If Hard Disk is selected, you must specify the number of Cyl-  
inders, Heads, and Sectors for the drive.  
None  
CD-ROM  
Hard Disk  
CHS Format (Cylinders, Heads, Sectors)  
Cylinders:  
A number  
between 0  
and 65,535  
–—  
This appears only when Hard Disk is selected. When Hard Disk is selected,  
you can change the value. This field is incremented by pressing the [Space-  
bar]). This field is decremented by pressing the [-] key. You can also change  
the field by typing in the number.  
Heads:  
A number  
between  
1 and 16  
–—  
This appears only when Hard Disk is selected. When it is selected, you can  
change the value. This field is incremented by pressing the [Spacebar]). This  
field is decremented by pressing the [-] key. The field can also be changed by  
typing in the number.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
M a i n M e n u  
Table 2: Fields, Options and Defaults for the Primary Master Submenu of the Main Menu  
Menu Field  
Options  
Default  
Description  
Sectors:  
A number  
between  
0 and 63  
–—  
This appears only when Hard Disk is selected. When it is selected, you can  
change the value. This field is incremented by pressing the [Spacebar]. This  
field is decremented by pressing the [-] key. The field can also be changed by  
typing in the number.  
Maximum  
Capacity:  
Display only  
–—  
Displays the maximum capacity of the drive calculated from the  
parameters of the hard disk when Hard Disk is selected.  
LBA Format (Logical Block Addressing)  
Total  
Sectors:  
–—  
–—  
–—  
–—  
The total number of sectors on your hard disk.  
The maximum capacity of your hard disk.  
Maximum  
Capacity  
Multi-  
Sector Trans-  
fers:  
Disabled  
2 Sectors  
4 Sectors  
8 Sectors  
16 Sectors  
[16 Sectors]  
This option cannot be changed when Auto is selected. Specify the number of  
sectors per block for multiple sector transfer.  
LBA Mode  
Control:  
Disabled  
Enabled  
[Enabled]  
Enables or disables Logical Block Addressing in place of Cylinder, Head, Sector  
addressing. This can’t be changed when Auto is selected.  
Transfer  
Mode:  
Standard  
Fast PIO 1  
Fast PIO 2  
Fast PIO 3  
Fast PIO 4  
Multiword  
DMA 1  
[Multiword  
DMA 2]  
Selects the method for moving data to/from the drive. Autotype the drive to  
select the optimum transfer mode. This option cannot be changed when  
Auto is selected.  
Multiword  
DMA 2  
Ultra DMA  
Mode:  
Disabled  
Mode 0  
Mode 1  
Mode 2  
Mode 3  
Mode 4  
Mode 5  
[Disabled]  
Selects the method for moving data to/from the drive. Autotype the drive to  
select the optimum transfer mode. This option cannot be changed when  
Auto is selected.  
A bootable CD-ROM may have a floppy disk format or a hard drive format. When the bootable CD-ROM is used,  
the drive allocations change automatically without changing the BIOS setup. If a floppy disk format CD-ROM is  
used, the CD-ROM becomes Drive A. The CD-ROM will only take Drive C: (hard drive format) if the internal hard  
drive is not present or is disabled. The bootable CD-ROM can never use a C: designation if a formatted internal  
hard drive is present, since the C: designator is always reserved for the internal hard drive. The boot sequence  
ignores the new drive designations, but your application software will use the new designations.  
Be careful of the operating environment when booting from a CD-ROM or you may overwrite files by mistake.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
L i f e B o o k  
S
S e r i e s N o t e b o o k B I O S  
Secondary Master Submenu of the Main Menu  
The Secondary Master submenu is for the internal CD-ROM drive. The drive type is displayed on this menu as well as  
the Main menu. Your notebook auto-senses the characteristics of the internal CD-ROM Drive installed. You will not  
need to modify these settings; they are displayed for your reference. Note that actual drive labels shown may vary.  
PhoenixBIOS Setup Utility  
Main  
Secondary Master [MATSHITADVD-RAM UJ-802S -(SM)]  
Item Specific Help  
Type:  
[Auto]  
Select ATA/ATAPI drive  
installed here.  
Multi-Sector Transfers:  
LBA Mode Control:  
Transfer Mode:  
[Disabled]  
[Disabled]  
[Standard]  
[Disabled]  
[Auto]  
The BIOS auto-types the  
drive on boot time.  
Ultra DMA Mode:  
Except [Auto]  
You enter parameters of  
the drive.  
[None]  
The drive is disabled.  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
Enter Select Sub-Menu  
F9 Setup Defaults  
F10 Save and Exit  
Figure 3. Primary Slave Submenu  
Table 3: Fields, Options and Defaults for the Primary Slave Submenu of the Main Menu  
Menu Field  
Options  
Default  
Description  
Type:  
Auto  
None  
CD-ROM  
Hard Disk  
[Auto]  
Selects the ATA/ATAPI device type. Select Auto to have the  
type automatically identified by the BIOS at POST. If None  
is selected, all of the following Set-up items do not appear.  
Select CD-ROM or Hard Disk for appropriate drive type  
installed at this connection.  
Multi-Sector  
Transfers:  
Disabled  
2 Sectors  
4 Sectors  
8 Sectors  
16 Sectors  
[Disabled]  
[Disabled]  
This option cannot be changed when Auto is selected.  
Specify the number of sectors per block for multiple sector  
transfer.  
LBA Mode Con-  
trol:  
Disabled  
Enabled  
Enables or disables Logical Block Addressing in place of  
Cylinder, Head, Sector addressing. This option cannot be  
changed when Auto is selected.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
M a i n M e n u  
Table 3: Fields, Options and Defaults for the Primary Slave Submenu of the Main Menu  
Menu Field  
Options  
Default  
Description  
Transfer Mode:  
Standard  
Fast PIO 1  
Fast PIO 2  
[Standard]  
Selects the method for moving data to/from the drive.  
Autotype the drive to select the optimum transfer mode.  
This option cannot be changed when Auto is selected.  
Fast PIO 3  
Fast PIO 4  
Multiword DMA 1  
Multiword DMA 2  
Ultra DMA  
Mode:  
Disabled  
Mode 0  
Mode 1  
Mode 2  
Mode 3  
Mode 4  
Mode 5  
[Disabled]  
Selects the method for moving data to/from the drive.  
Autotype the drive to select the optimum transfer mode.  
This option cannot be changed when Auto is selected.  
Exiting from Main Menu  
When you have finished setting the parameters on this menu, you can either exit from the setup utility, or move to  
another menu. If you wish to exit from the setup utility, press the [Esc] key or use the cursor keys to go to the Exit menu.  
If you wish to move to another menu, use the cursor keys.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
L i f e B o o k  
S
S e r i e s N o t e b o o k B I O S  
ADVANCED MENU – SETTING DEVICE FEATURE CONTROLS  
The Advanced Menu allows you to:  
Set the features of the keyboard/mouse.  
Select between the display panel and an external  
CRT display.  
Configure IDE devices in your system.  
Configure CPU features.  
See Navigating through the Setup Utility for more infor-  
mation.  
The following tables show the names of the menu fields  
for the Advanced Menu and its submenus, all of the  
options for each field, the default settings and a descrip-  
tion of the field’s function and any special information  
needed to help understand the field’s use.  
Configure USB features.  
Configure the power button.  
View DMI Event Logging  
Follow the instructions for Navigating Through the  
Setup Utility to make any changes.  
Note that not all fields appear in all configurations; the  
fields that appear are dependent upon the system CPU.  
PhoenixBIOS Setup Utility  
Security Boot Info  
Main  
Advanced  
Exit  
Item Specific Help  
Keyboard/Mouse Features  
Video Features  
Internal Device Configurations  
CPU Features  
USB Features  
Miscellaneous Configurations  
Event Logging  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
F9 Setup Defaults  
F10 Save and Exit  
Enter Select  
Sub-Menu  
Figure 4. Advanced Menu  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
A d v a n c e d M e n u  
Table 4: Fields, Options and Defaults for the Advanced Menu  
Menu Field  
Description  
Keyboard/Mouse  
Features  
When selected, opens the Keyboard/Mouse Features submenu, which enables and disables the  
power-on state for [NumLock].  
Video Features  
When selected, opens the Video Features submenu, which allows setting of the display  
parameters, including routing of video signals to different displays.  
Internal Device  
Configurations  
When selected, opens the Internal Device Configuration submenu, which allows enabling or  
disabling the IDE Controller.  
CPU Features  
USB Features  
When selected, opens the CPU Features submenu, which allows enabling or disabling the  
SpeedStep™ Technology feature for optimal battery life.  
When selected, opens the USB Features submenu, which allows enabling or disabling of Legacy  
Floppy Emulation.  
Miscellaneous  
Configurations  
When selected, opens the Miscellaneous Configurations submenu, which allows you to  
configure the power button.  
Event Logging  
When selected, opens the event logging submenu.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
L i f e B o o k  
S
S e r i e s N o t e b o o k B I O S  
Keyboard/Mouse Features Submenu of the Advanced Menu  
The Keyboard/Mouse Features submenu is for selecting the power-on state for the NumLock key.  
PhoenixBIOS Setup Utility  
Advanced  
Security  
Power Savings  
Exit  
Keyboard/Mouse Features  
[Off]  
Item Specific Help  
Numlock  
Select power-on state  
for Numlock.  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
Enter Select Sub-Menu  
F9 Setup Defaults  
F10 Save and Exit  
Figure 5. Keyboard/Mouse Features Submenu  
Table 5: Fields, Options and Defaults for the Keyboard/Mouse Submenu of the Advanced Menu  
Menu Field  
Options  
Default  
Description  
Numlock:  
On  
Off  
[Off]  
Sets the NumLock function state when the computer  
completes booting.  
On/Padlock Off  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
A d v a n c e d M e n u  
Video Features Submenu of the Advanced Menu  
The Video Features Submenu is for choosing the display.  
PhoenixBIOS Setup Utility  
Main  
Advanced  
Security  
Power Savings  
Exit  
Video Features  
Item Specific Help  
Display:  
Compensation: [Enabled]  
[Auto]]  
Select display terminal.  
* This setting is not  
effective after  
operating system  
starts up.  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
F9 Setup Defaults  
F10 Save and Exit  
Enter Select  
Sub-Menu  
Figure 6. Video Features Submenu  
Table 6: Fields, Options and Defaults for the Video Features Submenu of the Advanced Menu  
Menu Field  
Options  
Default  
Description  
Display:  
Internal  
Flat Panel  
[Auto]  
Selects where the video signal will be routed.  
External  
Auto  
Compensation:  
Disabled  
Enabled  
[Enabled]  
Enables or disables video compensation.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
L i f e B o o k  
S
S e r i e s N o t e b o o k B I O S  
Internal Device Configurations Submenu of the Advanced Menu  
The Internal Device Configurations submenu allows the user to enable or disable IDE ports and Wireless LAN.  
PhoenixBIOS Setup Utility  
Main  
Advanced  
Security  
Power Savings  
Exit  
Internal Device Configurations  
Item Specific Help  
[Disabled]  
No IDE ports are  
enabled.  
IDE Controller:  
Modem Controller:  
LAN Controller:  
Wireless LAN:  
[Both]  
[Enabled]  
[Enabled]  
[Enabled]  
[Primary]  
Only primary IDE port  
is enabled.  
[Secondary]  
Only secondary IDE port  
is enabled.  
[Both]  
Both primary and  
secondary IDE ports  
are enabled.  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
Enter Select  
F9 Setup Defaults  
F10 Save and Exit  
Sub-Menu  
Figure 7. Internal Device Configuration Submenu  
Table 7: Fields, Options and Defaults for the Internal Device Configuration Submenu of the Advanced Menu  
Menu Field  
Options  
Default  
Description  
IDE Controller:  
Disabled  
Primary  
Secondary  
Both  
[Both]  
Enables or disables IDE controllers.  
Modem  
Controller:  
Disabled  
Enabled  
[Enabled]  
[Enabled]  
[Enabled]  
Enables or disables the modem.  
LAN Controller:  
Wireless LAN:  
Disabled  
Enabled  
Enables or disables the LAN device.  
Enables or disables the Wireless LAN device.  
Disabled  
Enabled  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
A d v a n c e d M e n u  
CPU Features Submenu of the Advanced Menu  
The CPU Features Submenu configures the system processor. Note that this submenu only appears in certain configura-  
tions, based upon the system CPU.  
PhoenixBIOS Setup Utility  
Main  
Advanced  
Security  
Power Savings  
Exit  
CPU Features  
Item Specific Help  
Select Enhanced  
Intel(R) SpeedStep(R)  
Technology enabled or  
disabled.  
SpeedStep(R) Technology:  
On Battery:  
[Enabled]  
[Battery Optimized]  
[Maximum Performance]  
On AC:  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
F9 Setup Defaults  
F10 Save and Exit  
Enter  
Select  
Sub-Menu  
Figure 8. CPU Features Submenu  
Menu Field  
Options  
Default  
Description  
SpeedStep®  
Technology:  
Disabled  
Enabled  
[Enabled]  
When Enabled is selected, CPU speed and battery use  
can be selected from On Battery and On AC. When  
Disabled is selected, SpeedStep Technology is dis-  
abled.  
On Battery:  
Maximum Performance  
Battery Optimized  
Maximum Battery  
Automatic  
[Battery  
Optimized]  
When Maximum Performance is selected, CPU speed  
is maximized. When Battery Optimized is selected,  
CPU power requirements are optimized for battery  
operation. When Maximum Battery is selected, CPU  
speed is optimized for battery operation. When Auto-  
matic is selected, the CPU speed is determined by the  
power source used.  
On AC:  
Maximum Performance  
Battery Optimized  
Maximum Battery  
Automatic  
[Maximum  
Performance]  
When Maximum Performance is selected, CPU speed  
is maximized. When Battery Optimized is selected,  
CPU power requirements are optimized for battery  
operation. When Maximum Battery is selected, CPU  
speed is optimized for battery operation. When Auto-  
matic is selected, the CPU speed is determined by the  
power source used.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
L i f e B o o k  
S
S e r i e s N o t e b o o k B I O S  
USB Features Submenu of the Advanced Menu  
The USB Features Submenu configures the system for use with a USB floppy drive.  
PhoenixBIOS Setup Utility  
Main  
Advanced  
Security  
Power Savings  
Exit  
USB Features  
Item Specific Help  
Legacy USB Support:  
SCSI SubClass Support:  
[Enabled]  
[Enabled]  
[Disabled]  
The feature is disabled.  
[Enabled]  
Legacy USB Emulation  
is enabled, and USB  
devices are available  
without USB-aware OS.  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
F9 Setup Defaults  
F10 Save and Exit  
Enter Select  
Sub-Menu  
Figure 9. USB Features Submenu  
Table 9: Fields, Options and Defaults for the USB Features Submenu of the Advanced Menu  
Menu Field  
Options  
Default  
Description  
Legacy USB  
Support:  
Disabled  
Enabled  
[Enabled]  
When Enabled is selected, Legacy USB Emulation is  
enabled and USB devices are available without a USB-  
aware OS. When Disabled is selected, Legacy USB Emula-  
tion is disabled.  
n
SCSI SubClass  
Support:  
Disabled  
Enabled  
[Enabled]  
When Enabled is selected, USB devices that belong to the  
SCSI subclass in the mass storage class (e.g., USB Memory  
Key) are enabled. Note that enabling this feature may  
cause the system to hang during POST, depending on the  
device that is connected.  
n
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
A d v a n c e d M e n u  
Miscellaneous Configurations Submenu of the Advanced Menu  
The Miscellaneous Configurations Submenu configures the power button, wake-up feature, and volume setting.  
PhoenixBIOS Setup Utility  
Main  
Advanced  
Security  
Power Savings  
Exit  
Item Specific Help  
Miscellaneous Configurations  
Power Button:  
Wake up on LAN:  
Volume Setting:  
[Disabled]  
[Disabled]  
[Middle]  
Configures the power  
button.  
*ACPI OS ignores this  
setting.  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
F9 Setup Defaults  
F10 Save and Exit  
Enter Select  
Sub-Menu  
Figure 10. Miscellaneous Configurations Submenu  
Table 10: Fields, Options and Defaults for the Miscellaneous Configuration Submenu of the Advanced Menu  
Menu Field  
Options  
Default  
Description  
Power Button:  
Disabled  
Power Off  
[Disabled]  
When Disabled is selected, the power button does not control  
power. When Power Off is selected, pressing the power but-  
ton shuts off power to the system.  
Wake up  
on LAN:  
Disabled  
Enabled  
[Disabled]  
[Middle]  
When [Enabled], the system wakes up when the internal LAN  
device receives a Magic Packet while in Power-Off state.  
Volume Setting:  
Off  
Select the default volume level of the system speakers.  
Minimum  
Middle  
Maximum  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
L i f e B o o k  
S
S e r i e s N o t e b o o k B I O S  
Event Logging Submenu of the Advanced Menu  
The Event Logging Submenu configures event logging features for DMI events.  
PhoenixBIOS Setup Utility  
Main  
Advanced  
Security  
Power Savings  
Exit  
Event Logging  
Item Specific Help  
Event Log Capacity:  
Event Log Validity:  
Space Available  
Valid  
Press <Enter> key to  
view the contents of  
the event log.  
View Event Log:  
[Enter]  
Event Logging:  
[Enabled]  
System Boot Event:  
[Disabled]  
Clear All Event Logs:  
Mark Events as Read:  
[No]  
[Enter]  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
Enter Select  
F9 Setup Defaults  
F10 Save and Exit  
Sub-Menu  
Figure 11. Event Logging Submenu  
Table 11: Fields, Options and Defaults for the Event Logging Submenu of the Advanced Menu  
Menu Field  
Options  
Default  
Description  
Event Log Capacity:  
Event Log Validity:  
View Event Log:  
Event Logging:  
Space Available  
Valid  
Display only  
Display only  
Enter  
[Enter]  
Allows you to view content of event log  
Turns event logging on and off for all DMI events.  
Disabled  
Enabled  
[Enabled]  
System Boot Event:  
Clear All Event Logs:  
Mark Events as Read:  
Disabled  
Enabled  
[Disabled]  
[No]  
Turns event logging on and off for DMI system boot  
events.  
No  
Yes  
When set to [Yes] all event logs will be cleared at next  
boot.  
Enter  
[Enter]  
Allows you to make all events currently in the event log as  
having been read.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
A d v a n c e d M e n u  
SECURITY MENU – SETTING THE SECURITY FEATURES  
The Security menu allows you to set up the data security  
features of your notebook to fit your operating needs and  
to view the current data security configuration. Follow the  
instructions for Navigating Through the Setup Utility to  
make any changes. See Navigating through the Setup  
Utility for more information.  
n
Entering a password incorrectly 3 times  
in a row will cause the keyboard and  
mouse to be locked out and the warning  
[System Disabled]to be displayed.  
If this happens restart the computer by  
turning the power off and on with the  
power switch and use the correct pass-  
word on reboot.  
The tables show the names of the menu fields for the  
Security menu and its submenus, all of the options for  
each field, the default settings and a description of the  
field's function and any special information needed to  
help understand the field's use. The default condition is  
no passwords required and no write protection.  
n
If you make an error when re-entering  
the password a warning will be displayed  
on the screen. To try again press [Enter]  
and retype the password. Press [Esc] to  
abort the password setting process.  
n
If Password On Resume is Enabled and  
Password On Boot is Disabled you will  
not have to type your password upon  
resuming the system from the Suspend  
or Save-to-Disk modes. Password On  
Resume will work only if Password On  
Boot is enabled.  
If you set a password, write it down and  
keep it in a safe place. If you forget the  
password, you will have to contact your  
support representative to regain access to  
your secured functions and data.  
n
Boot sector protection must be set to  
[Normal] to install or upgrade an  
operating system.  
PhoenixBIOS Setup Utility  
Security Boot Info  
Main  
Advanced  
Exit  
Item Specific Help  
Supervisor Password Is:  
User Password Is:  
Clear  
Clear  
Press [Enter] key to  
set Supervisor Password  
to enable any password  
features.  
Set Supervisor Password  
Set User Password  
Minimum User Password Length:  
Password on Boot:  
On Automatic Wake up:  
KB Lock on Resume:  
Boot from Removable Media:  
Flash Write:  
[Enter]  
[Enter]  
[0]  
[Disabled]  
[Disabled]  
[Disabled]  
[All]  
Then password entry is  
required to enter BIOS  
Setup.  
[Enabled]  
Hard Disk Security  
Owner Information  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
Enter Select Sub-Menu  
F9 Setup Defaults  
F10 Save and Exit  
Figure 12. Security Menu  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
L i f e B o o k  
S
S e r i e s N o t e b o o k B I O S  
Table 12: Fields, Options and Defaults for the Security Menu  
Menu Field  
Options  
Default  
Description  
A display-only field. Set is displayed when the system supervisor password is  
set and Clear when it is not.  
Supervisor  
Password is:  
–—  
Clear  
A display-only field. Set is displayed when the general user  
password is set and Clear when it is not.  
User Password is:  
–—  
–—  
Clear  
Sets, changes or cancels the Supervisor Password. The Supervisor Password  
may be up to seven characters and must include only letters or numbers (no  
symbols). Passwords are NOT case-sensitive. To cancel a password press  
[Enter] instead of entering characters in the Enter New Password field and Re-  
enter New Password fields. When a Supervisor Password is set it must be used  
to access the BIOS setup utility.  
Set Supervisor  
Password  
[Enter]  
This field can only be accessed if Supervisor Password is set. This field sets,  
changes, or cancels User Password. User Password may be up to seven char-  
acters and must include only letters or numbers (no symbols). Passwords are  
NOT case-sensitive. To cancel a password, press the Enter key instead of  
entering characters in the Enter New Password field and in the Re-enter New  
Password field. When a User Password is set it must be used to access the  
BIOS setup utility.  
Set User Password  
–—  
[Enter]  
Sets the minimum length for the user password. Requires a supervisor pass-  
word in order to be set.  
Minimum User  
Password Length:  
–—  
[0]  
When set to Disabled, no password is required. When set to First Boot, a pass-  
word (User or Supervisor) is required after the Power On Self Test (POST)  
before the operating system will be read from a disk. If Every Boot is set, a  
password (User or Supervisor) is required after the Power On Self Test (POST)  
every time the system is booted (before the operating system is read from the  
disk).  
Password on Boot:  
Disabled  
First Boot  
Every Boot  
[Disabled]  
When set to Disabled, it is not necessary to enter a password to wake up from  
LAN or Real Time Clock (RTC). When Enabled, it is still necessary to enter a  
password after automatic wake-up.  
On Automatic  
Wake-up:  
Disabled  
Enabled  
[Disabled]  
[Disabled]  
When set to Enabled, the PS/2 mouse and keyboard inputs are locked out  
upon Resume from Suspend or Save to Disk mode until you enter the pass-  
word. When set to Disabled no password is required. If no Supervisor Pass-  
word is set, this feature is not available and no password is required.  
KB Lock on  
Resume:  
Disabled  
Enabled  
If Supervisor Only is selected, only the supervisor can boot from removable  
media. If All is selected, anyone can boot from removable media.  
Boot from  
Removable  
Media:  
All  
Supervisor  
only  
[All]  
When disabled, the BIOS Flash memory is write protected; when enabled, it is  
not.  
Flash Write:  
Disabled  
Enabled  
[Enabled]  
–—  
Configures hard disk security features.  
Sets Owner information.  
Hard Disk  
Security:  
–—  
Owner  
–—  
–—  
Information:  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
A d v a n c e d M e n u  
Hard Disk Security Submenu of the Security Menu  
The Hard Disk Security Submenu is for configuring hard disk security features.  
PhoenixBIOS Setup Utility  
Main  
Advanced  
Security  
Power Savings  
Exit  
Hard Disk Security  
Item Specific Help  
Primary Master Password Is:  
Secondary Master Password Is:  
Clear  
Not Available  
Set Primary Master Password:  
Set Secondary Master Password:  
[Enter]  
[Enter]  
Password Entry on Boot:  
[Enabled]  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
Enter Select Sub-Menu  
F9 Setup Defaults  
F10 Save and Exit  
Figure 13. Hard Disk Security Submenu  
Table 13: Fields, Options and Defaults for the Hard Disk Security Submenu of the Security Menu  
Menu Field  
Options  
Default  
Description  
Primary  
Master  
Password Is:  
___  
Clear  
Display-only. Default is Clear. When the Primary Master Password has been set,  
the field changes to Set. When this password is set, the primary hard disk drive  
cannot be used in another system unless the password is entered.  
Secondary  
Master  
Password Is:  
___  
___  
Not  
Available  
Display only.  
Set Primary  
Master  
Password:  
[Enter]  
Sets, changes or cancels the Primary Master Password. The Primary Master  
Password may be up to seven characters long and must include only letters or  
numbers (no symbols). Passwords are NOT case-sensitive. When a Primary  
Master Password is set, it must be used to access the primary hard drive if it is  
used in another system. Note that the password will not take effect until the  
system has been rebooted.  
Set Secondary  
Master  
___  
[Enter]  
Not currently available.  
Password:  
Password  
Entry on Boot:  
Disabled  
Enabled  
[Enabled]  
When disabled, it is not necessary to enter a Hard Disk Password before boot-  
ing. The hard disk is still password-protected without entering a password.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
L i f e B o o k  
S
S e r i e s N o t e b o o k B I O S  
Owner Information Submenu of the Security Menu  
The Owner Information Submenu is for setting owner information.  
Note: This submenu can be modified only if a Supervisor’s Password has been set previously.  
PhoenixBIOS Setup Utility  
Main  
Advanced  
Security  
Power Savings  
Exit  
Owner Information  
Item Specific Help  
Owner Information Is:  
Set Owner Information  
Clear  
[Enter]  
Foreground Color:  
Background Color:  
[Gray]  
[Black]  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
F9 Setup Defaults  
F10 Save and Exit  
Enter  
Select  
Sub-Menu  
Figure 14. Owner Information Submenu  
Table 14: Fields, Options and Defaults for the Owner Information Submenu of the Security Menu  
Menu Field  
Options  
–—  
Default  
Clear  
Description  
Owner Information Is:  
Set Owner Information:  
Display only.  
–—  
[Enter]  
Field to write owner  
information (i.e., name).  
Foreground Color:  
Background Color:  
Black  
Blue  
Green  
Cyan  
Red  
Brown  
White  
Gray  
Light Blue  
Light Green  
Light Cyan  
Light Red  
Light  
[Gray]  
Select a color for the  
foreground.  
Magenta  
Yellow  
Bright White  
Magenta  
Black  
Blue  
Green  
Cyan  
Red  
Brown  
White  
Gray  
Light Blue  
Light Green  
Light Cyan  
Light Red  
Light  
Magenta  
Yellow  
[Black]  
Select a color for the back-  
ground.  
Bright White  
Magenta  
Exiting from the Security Menu  
When you have finished setting the parameters on the Security Menu, you can either exit from setup utility or move to  
another menu. If you wish to exit from setup utility, press the Esc key to go to the Exit Menu. If you wish to move to  
another menu, use the cursor keys.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
S e c u r i t y M e n u  
BOOT MENU – SELECTING THE OPERATING SYSTEM SOURCE  
The Boot Menu is used to select the order in which the  
BIOS searches sources for the operating system. Follow  
the instructions for Navigating Through the Setup Utility  
to make any changes. See Navigating through the Setup  
Utility for more information.  
The following tables show the names of the menu fields  
for the Boot menu and its submenu, all of the options  
for each field, and the default settings. Also shown are a  
description of the field's function and any special infor-  
mation needed to help understand the field's use.  
PhoenixBIOS Setup Utility  
Main  
Advanced  
Security  
Boot  
Info  
Exit  
Item Specific Help  
Quick Boot:  
[Enabled]  
Boot Time Diagnostic Screen:  
Boot Menu:  
Preboot Execution Environment:  
Boot Device Priority  
[Disabled]  
[Enabled]  
[Disabled]  
[Disabled]  
All diagnostic tests  
will be done.  
[Enabled]  
Some diagnostic tests  
may be skipped while  
booting to speed up.  
F1 Help  
ESC Exit  
Select Item -/Space Change Values  
Select Menu Enter  
Select Sub-Menu  
F9 Setup Defaults  
F10 Save and Exit  
Figure 15. Boot Menu  
Table 15: Fields, Options and Defaults for the Boot Menu  
Menu Field  
Options  
Default  
Description  
QuickBoot:  
Disabled  
Enabled  
[Enabled]  
When disabled, all diagnostic tests are performed when the  
system is booted up. If [Enabled] is set, some of the tests are  
skipped in order to speed up the booting process.  
Boot-time  
Diagnostic Screen:  
Disabled  
Enabled  
[Disabled]  
[Enabled]  
Turns on and off display of test results instead of Fujitsu logo  
screen during Power On Self Test.  
Boot Menu:  
Disabled  
Enabled  
This field is not active unless the Supervisor’s Password has  
been set. When disabled, access to the Boot Menu with the  
[F12] key is disabled. When enabled, the Boot Menu is  
enabled and the [F12] key will allow you to display it.  
Preboot Execution  
Environment  
Disabled  
Enabled  
[Disabled]  
Turns on and off boot from network server options.  
This menu allows setting up the source for bootup.  
Boot Device  
Priority  
Selects Boot Device  
Priority submenu  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
L i f e B o o k  
S
S e r i e s N o t e b o o k B I O S  
Boot Device Priority Submenu of the Boot Menu  
The Boot Device Priority Submenu is for setting the order of checking of sources for the operating system.  
PhoenixBIOS Setup Utility  
Boot  
Boot Device Priority  
Item Specific Help  
+Floppy Disk Drive  
+Hard Disk Drive  
CD-ROM Drive  
Keys used to view or  
configure devices:  
<Enter> expands or  
collapses devices with  
a + or -.  
<Ctrl+Enter> expands  
all.  
<Shift+1> enables or  
disables a device.  
<+>/<Space> or <->  
moves the device up or  
down.  
<d> removes a device  
that is not installed.  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
Enter Select Sub-Menu  
F9 Setup Defaults  
F10 Save and Exit  
Figure 16. Boot Device Priority Submenu  
Table 16: Fields, Options and Defaults for the Boot Device Priority Submenu of the Boot Menu  
Menu Field  
Description  
+Floppy Disk Drive  
+Hard Disk Drive  
CD-ROM Drive  
The boot selections determine the order in which the BIOS searches for the operating system dur-  
ing a startup sequence. To view all devices related to a source, press [Enter]; to view all devices  
related to all sources, press [Ctrl] + [Enter]. To change the order, highlight one source by using the  
[up] or [down] cursor keys and then press the [+] or [-] key to change the order number for that  
source. [Shift] + [1] enables a device. Pressing [d] removes from the list a device that is not  
installed. Be sure to save your changed order when you exit the BIOS setup utility.  
NOTE: Be aware that if you use the CD-ROM drive as the first boot device, certain files may be  
overwritten, depending upon your operating environment.  
Exiting from Boot Menu  
When you have finished setting the boot parameters with the Boot menu, you can either exit from the setup utility or  
move to another menu. If you wish to exit from the setup utility press the Esc key to go to the Exit menu. If you wish to  
move to another menu, use the cursor keys.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
S e c u r i t y M e n u  
INFO MENU - DISPLAYS BASIC SYSTEM INFORMATION  
The Info menu is a display only screen that provides the  
configuration information for your notebook.  
The information, including CPU type and  
The following table shows the names of the menu fields  
for the Info menu and the information displayed in those  
fields. These fields are for information purposes only, and  
cannot be modified by the user.  
speed, and total memory, displayed on this  
screen varies according to the unit you  
purchased.  
PhoenixBIOS Setup Utility  
Security Boot Info  
Main  
Advanced  
Exit  
Item Specific Help  
BIOS Version:  
BIOS Date:  
1.04  
04/19/2004  
BIOS Area:  
E000h - FFFFh  
CPU Type:  
CPU Speed:  
L1 Cache:  
L2 Cache:  
Intel(R) Pentium(R) M  
1.50 GHz  
64 KB  
1024 KB  
Total Memory:  
512 MB  
Onboard Memory: 512 MB DDR SDRAM  
Memory Slot: None  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
Enter Select Sub-Menu  
F9  
Setup Defaults  
F10 Save and Exit  
Figure 17. Info Menu  
Table 17: Fields, Options and Defaults for the Info Menu  
Note that some of the parameters reflected below may be different from those on your screen, depending upon system  
configuration.  
Menu Field  
BIOS Version:  
BIOS Date:  
BIOS Area:  
CPU Type:  
Default  
Menu Field  
Default  
1.04  
L1 Cache:  
64 KB  
04/19/2004  
E000h – FFFFh  
Intel(R) Pentium(R) M  
1.50 GHz  
L2 Cache:  
1024 KB  
Total Memory:  
Onboard Memory  
Memory Slot  
512 MB  
512 MB DDR SDRAM  
None  
CPU Speed:  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
L i f e B o o k  
S
S e r i e s N o t e b o o k B I O S  
EXIT MENU – LEAVING THE SETUP UTILITY  
The Exit Menu is used to leave the setup utility. Follow  
the instructions for Navigating Through the Setup Utility  
to make any changes. See Navigating through the Setup  
Utility for more information.  
The following table shows the names of the menu fields  
for the Exit menu, the default settings and a description  
of the field's function and any special information  
needed to help understand the field's use.  
PhoenixBIOS Setup Utility  
Security Boot Info  
Main  
Advanced  
Exit  
Item Specific Help  
Exit Saving Changes  
Exit Discarding Changes  
Load Setup Defaults  
Discard Changes  
Exit System Setup and  
save your changes to  
CMOS.  
Save Changes  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
Enter Select Sub-Menu  
F9  
Setup Defaults  
F10 Save and Exit  
Figure 18. Exit Menu  
Table 18: Fields, Options and Defaults for the Exit Menu  
Keyboard  
Menu Field  
Description  
Shortcut  
Exit Saving  
Changes  
Press  
F10key  
Exit Saving Changes and Exit will store all the entries on every menu of the setup utility to  
the BIOS memory and then exit the setup utility. A confirmation message Save Con-  
figuration changes and exit now? [Yes] [No] will be displayed.  
Exit Discard-  
ing Changes  
–—  
Selecting Exit Discarding Changes and Exit will exit the setup utility with out writing to  
the BIOS memory. A setup warning message Configuration has not been  
saved! Save before exiting? [Yes] [No]will be displayed when your settings  
have changed. When the BIOS recognizes the Exit Discarding Changes selection it will  
load the operating system and begin operation.  
Load Setup  
Defaults  
Press  
F9key  
Selecting Load Setup Defaults will load the factory preset default values for all menu  
fields, then display the message Load default configuration now? [Yes]  
[No]. When confirmed the setup utility will return to the Exit Menu. To return to  
another menu follow the directions in the Navigating Through the Setup Utility Section.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
B o o t M e n u  
Table 18: Fields, Options and Defaults for the Exit Menu  
Keyboard  
Menu Field  
Description  
Shortcut  
Discard  
Changes  
–—  
Selecting Discard Changes will load the previous values in BIOS memory for all menu  
fields. The message Load previous configuration now? [Yes] [No] will be  
displayed. When confirmed the setup utility will return to the Exit menu. To return to  
another menu, follow the directions in the Navigating Through the Setup Utility Section.  
Save  
Changes  
–—  
Selecting Save Changes will cause the new settings in all menus to be written to the BIOS  
memory. The message Save configuration changes now? [Yes] [No] will  
be displayed. When confirmed, the setup utility will return to the Exit menu. To return to  
another menu, follow the directions in the Navigating Through the Setup Utility section.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Elation Professional Camcorder EVC MH User Manual
Ericsson Network Router W3X User Manual
Fender Stereo Amplifier SPL 6000P User Manual
Fisher Price Baby Toy W9901 User Manual
Fluke Thermometer 5626 5628 User Manual
FujiFilm Camera Accessories LAS 3000 User Manual
Gateway Computer Drive WBU 110 User Manual
Gefen Switch EXT DVIKVM 441DL User Manual
GE Monogram Air Conditioner AEE18 User Manual
Genius Speaker J10 User Manual