Fujitsu LifeBook
S Series
BIOS Guide
LifeBook S Series Model:
S-4572
F U J I T S U P C C O R P O R A T I O N
FPC58-0547-01
Download from Www.Somanuals.com. All Manuals Search And Download.
S
S e r i e s B I O S
2. If an error message is displayed on the screen, and
you want to continue with the boot process and start
the operating system anyway, press the [F1] key.
C A U T I O N
If your notebook beeps a series of beeps that sounds
like a code and the display is blank, please refer to the
Troubleshooting Section. The Troubleshooting Section
includes a list of error messages and their meanings.
P O I N T
If your data security settings require it, you may be
asked for a password before the operating system will
be opened.
3. If an error message is displayed on the screen, and
you want to enter the setup utility, press the [F2] key.
4. When the setup utility starts with a fault present, the
system displays the following message:
Warning!
Error message
[Continue]
5. Press any key to enter the setup utility. The system
will then display the Main Menu with current
parameters values.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
L i f e B o o k
S
S e r i e s B I O S
MAIN MENU – SETTING STANDARD SYSTEM PARAMETERS
The Main Menu allows you to set or view the current
system parameters. Follow the instructions for Navi-
gating Through The Setup Utility to make any changes.
(See Navigating Through the Setup Utility on page 2 for
more information)
the field’s function and any special information needed
to help understand the field’s use. Note that the actual
drive labels shown may vary.
P O I N T
The following tables show the names of the menu fields
for the Main menu and its submenus, all of the options
for each field, the default settings and a description of
System Time and System Date can also be set from your
operating system without using the setup utility. Use
the calendar and time icon on your Windows Control
panel or type time or date from the MS-DOS prompt.
PhoenixBIOS Setup Utility
Main
Advanced
Security
Power
Boot
Info
Exit
Item Specific Help
System Time:
System Date:
[02:34:56]
[05/24/2001]
Adjust calendar clock.
Floppy Disk A:
[Disabled]
<Tab>, <Shift-Tab>, or
<Enter> selects field.
Primary Master
Primary Slave
[FUJITSU MHM2200AT-(PM)]
[MATSHITADVD-ROM-SR-8175-(PS)]
Language:
[English (US)]
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
F9 Setup Defaults
F10 Save and Exit
Enter Select
Sub-Menu
Figure 1. Main Menu
Table 1: Fields, Options and Defaults for the Main Menu
Menu Field
Options
Default
Description
System Time:
–—
–—
Sets and displays the current time. Time is in a 24 hour format
of hours:minutes:seconds with 2 digits for each. (HH:MM:SS).
Example: 16:45:57. You may change each segment of the time
separately. Move between the segments with the [Tab] key and/or
[Shift] + [Tab] keys.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
M a i n M e n u
Table 1: Fields, Options and Defaults for the Main Menu
Menu Field
Options
Default
Description
System Date:
–—
–—
Sets and displays the current date. Date is in a month/day/year
numeric format with 2 digits each for month and day and 4 digits
for year. (MM/DD/YYYY) for example: 03/20/1998. You may
change each segment of the date separately. Move between the
segments with the [Tab] key and/or [Shift] + [Tab] keys.
I
Floppy Disk A:
Primary Master:
Primary Slave:
Language:
Disabled
[1.44/1.2 MB
3.5"]
[Disabled]
Enables or disables a floppy disk.
I
I
Selects Primary
Master submenu
The product # of
the Hard Drive
Display the type of device on this ATA/ATAPI interface, if there is
one. Pressing the Enter key selects the Primary Master submenu
allowing additional device configuration options for this interface.
I
Selects Primary
Slave submenu
The product # of
the CD-ROM or
DVD/CD-RW
Display the type of device on this ATA/ATAPI interface, if there is
one. Pressing the Enter key selects the Secondary Master submenu
allowing additional device configuration options for this interface.
I
English (US)
Japanese (JP)
[English (US)]
The default setting differs between the US/European and the
Japanese model. Selects the display language for the BIOS.
I
5
Download from Www.Somanuals.com. All Manuals Search And Download.
L i f e B o o k
S
S e r i e s B I O S
Primary Master Submenu of the Main Menu
The Primary Master submenu identifies what ATA
devices are installed.
Note that actual hard drive label shown may vary.
Depending on the drive type, information such as cylin-
ders, heads and sectors may also be displayed.
PhoenixBIOS Setup Utility
Main
Primary Master [FUJITSU MHM2200AT-(PM)]
Item Specific Help
Type:
Maximum Capacity:
[Auto]
20004MB
Select ATA/ATAPI drive
installed here.
Multi-Sector Transfers:
LBA Mode Control:
PIO Transfer Mode:
DMA Transfer Mode:
[16 Sectors]
[Enabled]
[Fast PIO 4]
[Ultra DMA 2]
[Auto]
The BIOS auto-types the
drive on boot time.
Except [Auto]
You enter parameters of
the drive.
[None]
The drive is disabled.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
Enter Select Sub-Menu
F9 Setup Defaults
F10 Save and Exit
Figure 2. Primary Master Submenu
Table 2: Fields, Options and Defaults for the Primary Master Submenu of the Main Menu
Menu Field
Options
Default
Description
I
Type:
Auto
None
CD-ROM
SuperDisk
Hard Disk
[Auto]
Selects the ATA/ATAPI device type. Select Auto to have the type
automatically identified by the BIOS at POST. If None is selected, all
of the following Set-up items do not appear. Select CD-ROM if a
CD-ROM drive is installed at this connection. If User is selected,
you must specify the number of Cylinders, Heads, and Sectors for
the drive. Select ATAPI Removable if a removable disk drive is
installed at this connection.
I
I
I
I
I
I
I
Cylinders:
Heads:
A number
between 0
and 65,535
–—
–—
–—
This item appears only when Hard Disk is selected. When selected,
you can change the value. This field is changed by incrementing
(pressing the [Spacebar]) or by typing in the number.
A number
between 1
and 16
This item appears only when the type is identified as Hard Disk.
When selected, you can change the value. This field is changed by
incrementing (pressing the [Spacebar]) or by typing in the number.
Sectors:
A number
between 0
and 63
This item appears only when the type is identified as Hard Disk.
When selected, you can change the value. This field is changed by
incrementing (pressing the [Spacebar]) or by typing in the number.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
M a i n M e n u
Table 2: Fields, Options and Defaults for the Primary Master Submenu of the Main Menu
Menu Field
Options
Default
Description
Maximum
Capacity:
Display only
–—
Displays the maximum capacity of the drive calculated from the
parameters of the hard disk when Auto is selected and the type
is identified as hard disk, or User is selected.
I
Multi-Sector
Transfers:
Disabled
2 Sectors
4 Sectors
8 Sectors
16 Sectors
32 Sectors
64 Sectors
128 Sectors
[16 Sectors]
This option cannot be changed when Auto is selected. Specify the
number of sectors per block for multiple sector transfer. MAX refers
to the size the disk returns when required.
I
I
I
I
I
I
I
I
I
LBA Mode Con-
trol:
Disabled
Enabled
[Enabled]
Enables or disables logical Block Addressing in place of Cylinder,
Head, Sector addressing. This option cannot be changed when
Auto is selected.
I
I
I
I
I
PIO Transfer
Mode:
Standard
[Fast PI0 4]
Selects the method for moving data to/from the drive. Autotype
the drive to select the optimum transfer mode. This option cannot
be changed when Auto is selected. Multi-word DMA is automati-
cally set to mode 1 for Fast PIO 1, Fast PIO 2, Fast PIO 3, and set to
mode 2 for Fast PIO 4 / DMA.
Fast PIO 1
Fast PIO 2
Fast PIO 3
Fast PIO 4
I
I
DMA Transfer
Mode:
Disabled
Multiword
DMA 1
Multiword
DMA 2
Ultra DMA 0
Ultra DMA 1
Ultra DMA 2
[Ultra DMA 2]
Selects the method for moving data to/from the drive. Autotype
the drive to select the optimum transfer mode. This option cannot
be changed when Auto is selected.
I
I
I
I
C A U T I O N
C A U T I O N
Be careful of the operating environment when booting
from a CD-ROM or you may overwrite files by mistake.
A bootable CD-ROM may have either a floppy disk for-
mat or a hard drive format. When the bootable CD-
ROM is used, the drive allocations change automatically
without changing the BIOS setup. If a floppy disk for-
mat CD-ROM is used, the CD-ROM becomes Drive A.
The CD-ROM will only take drive C: (hard drive format)
if the internal hard drive is not present or is disabled.
The bootable CD-ROM can never use a C: designation
if a formatted internal hard drive is present since the C:
designator is always reserved for the internal hard
drive.The boot sequence ignores the new drive designa-
tions, however, your application software will use the
new designations.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
L i f e B o o k
S
S e r i e s B I O S
Primary Slave Submenu of the Main Menu
The Primary Slave submenu is for the internal CD/
DVD/CD-RW drive. The drive type is displayed on this
menu as well as the Main menu. Your notebook auto-
senses the characteristics of the internal drive installed.
You will not need to modify these settings, they are
displayed for your reference.
Note that actual drive labels shown may vary.
PhoenixBIOS Setup Utility
Main
Primary Slave [MATSHITADVD-ROM SR-8175-(PS)]
Item Specific Help
Type:
[Auto]
Select ATA/ATAPI drive
installed here.
Multi-Sector Transfers:
LBA Mode Control:
PIO Transfer Mode:
DMA Transfer Mode:
[Disabled]
[Disabled]
[Standard]
[Disabled]
[Auto]
The BIOS auto-types the
drive on boot time.
Except [Auto]
You enter parameters of
the drive.
[None]
The drive is disabled.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
F9 Setup Defaults
F10 Save and Exit
Enter Select
Sub-Menu
Figure 3. Primary Slave Submenu
Table 3: Fields, Options and Defaults for the Primary Slave Submenu of the Main Menu
Menu Field
Options
Default
Description
I
Type:
Auto
None
CD-ROM
SuperDisk
Hard Disk
[Auto]
Selects the ATA/ATAPI device type. Select Auto to have the type
automatically identified by the BIOS at POST. If None is selected, all
of the following Set-up items do not appear. Select CD-ROM,
SuperDisk or Hard Disk for appropriate drive type installed at
this connection.
I
I
I
I
I
I
I
I
I
I
I
I
Multi-Sector
Transfers:
Disabled
[Disabled]
This option cannot be changed when Auto is selected. Specify the
number of sectors per block for multiple sector transfer.
2 Sectors
4 Sectors
8 Sectors
16 Sectors
32 Sectors
64 Sectors
128 Sectors
8
Download from Www.Somanuals.com. All Manuals Search And Download.
M a i n M e n u
Table 3: Fields, Options and Defaults for the Primary Slave Submenu of the Main Menu
Menu Field
Options
Default
Description
I
LBA Mode Con-
trol:
Disabled
Enabled
[Disabled]
Enables or disables Logical Block Addressing in place of Cylinder,
Head, Sector addressing. This option cannot be changed when
Auto is selected.
I
I
PIO Transfer
Mode:
Standard
Fast PIO 1
Fast PIO 2
Fast PIO 3
Fast PIO 4
[Standard]
[Disabled]
Selects the method for moving data to/from the drive. Autotype
the drive to select the optimum transfer mode. This option cannot
be changed when Auto is selected. Multi-word DMA is automati-
cally set to mode 1 for Fast PIO 1, Fast PIO 2, Fast PIO 3, and set to
mode 2 for Fast PIO 4 / DMA.
I
I
I
I
I
I
DMA Transfer
Mode:
Disabled
Multiword
DMA 1
Multiword
DMA 2
Ultra DMA 0
Ultra DMA 1
Ultra DMA 2
Selects the method for moving data to/from the drive. Autotype
the drive to select the optimum transfer mode. This option cannot
be changed when Auto is selected.
I
I
I
I
Exiting from Main Menu
When you have finished setting the parameters on this
menu, you can either exit from the setup utility, or move
to another menu. If you wish to exit from the setup
utility, press the [Esc] key or use the cursor keys to go to
the Exit menu or to move to another menu.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
L i f e B o o k
S
S e r i e s B I O S
ADVANCED MENU – SETTING DEVICE FEATURE CONTROLS
The Advanced Menu allows you to:
Follow the instructions for Navigating Through the
Setup Utility to make any changes.
I
Enable or disable support for Plug & Play.
Set the I/O addresses for the serial and parallel ports.
Set the communication mode and Infrared.
Set the features of the keyboard/mouse.
I
(See Navigating Through the Setup Utility on page 2 for
more information)
I
I
I
Select between the display panel and an external
The following tables show the names of the menu fields
for the Advanced Menu and its submenus, all of the
options for each field, the default settings and a descrip-
tion of the field’s function, and any special information
needed to help understand the field’s use.
CRT display.
Enable or disable compensation for your display.
Configure PCI devices in your system.
Configure CPU features.
Configure USB features.
Configure DMI Event Logging.
I
I
I
I
I
PhoenixBIOS Setup Utility
Security Power Boot
Main
Advanced
Info
Exit
Item Specific Help
[No]
[Yes]
Plug & Play O/S:
The BIOS configures
also non-boot devices.
Select if you are using
a non-Plug & Play OS or
a non-ACPI OS.
Protected Device Configurations:[No]
Serial/Parallel Port Configurations
Keyboard/Mouse Features
Video Features
Internal Device Configurations
PCI Configurations
CPU Features
[Yes]
The BIOS configures
only boot devices.
USB Features
Event Logging
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
Enter Select
F9 Setup Defaults
F10 Save and Exit
Sub-Menu
Figure 4. Advanced Menu
10
Download from Www.Somanuals.com. All Manuals Search And Download.
A d v a n c e d M e n u
Table 4: Fields, Options and Defaults for the Advanced Menu
Menu Field
Options
Default
Description
I
Plug & Play O/S:
No
Yes
[Yes]
Select Yes if you are using a Plug & Play capable operating system.
Select No if you need the BIOS to configure non-boot devices.
I
I
Protected Device
Configurations:
No
Yes
[No]
No: allows Plug & Play operating system to change device
system settings.
Yes: prevents a Plug & Play operating system from changing
system settings.
I
*ACPI operating system ignores this setting.
Serial/Parallel Port
Configurations
–—
–—
–—
–—
–—
–—
–—
–—
When selected, opens the Serial/Parallel Port Configurations sub-
menu which allows the user to modify settings for serial, infrared
and parallel ports.
Keyboard/Mouse
Features
When selected, opens the Keyboard/Mouse Features submenu,
which allows setting external and internal keyboard and
mouse parameters.
Video Features
When selected, opens the Video Features submenu, which allows
setting of the display parameters, including routing of video signals
to different displays.
Internal Device
Configurations
When selected, opens the Internal Device Configuration submenu,
which allows enabling or disabling the Floppy Disk, IDE, Modem
and LAN Controllers.
PCI Configurations
CPU Features Page
USB Features Page
Event Logging
–—
–—
–—
–—
–—
–—
–—
–—
When selected, opens additional menus to configure PCI devices.
Configures CPU features.
Configures USB features.
When selected, opens the event logging submenu.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
L i f e B o o k
S
S e r i e s B I O S
Serial/Parallel Port Configuration Submenu of the Advanced Menu
The Serial/Parallel Port Configuration submenu
P O I N T
provides the ability to set the I/O addresses and
interrupt levels for the serial, infrared, and parallel
ports of your notebook.
To prevent IRQ and address conflicts, avoid changing
the default settings. If you must change the settings,
you can call 1-800-8FUJITSU for technical assistance.
C A U T I O N
I/O addresses, DMA channels, and Interrupt levels
can be entered in various ways, including via the BIOS
setup utility, the control software for the I/O device,
or the hardware. If any two ports or devices, serial or
parallel, have the same I/O address assigned your
notebook will not function normally. Please keep a
record of original settings before making any changes
in the event that a restoration is required. See your
hardware and software documentation as well as the
setup utility to determine settings, limitations, etc.
C A U T I O N
The BIOS will warn you of a resource conflict by placing
a yellow asterisk next to each device that is in conflict.
P O I N T
All I/O addresses in Table 5 are in hexadecimal.
PhoenixBIOS Setup Utility
Advanced
Item Specific Help
Serial/Parallel Port Configurations
Serial Port:
[Enabled]
[3F8-3FF]
[IRQ 4]
[Enabled]
[FIR]
[2E8 - 2EF]
[IRQ 3]
[118-11F]
[DMA 3]
[Disabled]
The port is disabled.
I/O Address:
Interrupt:
Infrared Port:
Mode:
I/O Address:
Interrupt:
I/O Address:
DMA Channel:
Parallel Port:
Mode:
[Enabled]
The port is enabled
with user configuration.
[Auto]
The port is configured
depending on 'Plug &
[Enabled]
[Bi-directional]
[378-37F]
Play OS' setting.
I/O Address:
Interrupt:
[IRQ 7]
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
F9 Setup Defaults
F10 Save and Exit
Enter Select
Sub-Menu
Figure 5. Serial/Parallel Port Configuration Submenu
12
Download from Www.Somanuals.com. All Manuals Search And Download.
A d v a n c e d M e n u
Table 5: Fields, Options and Defaults for the Serial/Parallel
Port Configuration Submenu of the Advanced Menu
Menu Field
Options
Default
Description
I
Serial Port:
Disabled
Enabled
Auto
[Enabled]
Configures the serial port using either no configuration
(Disabled), a user defined configuration (Enabled), or by
allowing the BIOS or OS to choose the configuration (Auto).
I
I
I
I
I
I
I/O Address:
3F8 - 3FF
2F8 - 2FF
3E8 - 3EF
2E8 - 2EF
[3F8 - 3FF]
Allows user to set the serial port base I/O address when serial port is
Enabled.
I
I
I
Interrupt:
IRQ 3
IRQ 4
IRQ 5
[IRQ 4]
Allows user to set the serial port interrupt when serial port
is Enabled.
I
I
I
Infrared Port:
Disabled
Enabled
Auto
[Enabled]
Configures the infrared port using either no configuration
(Disabled), a user defined configuration (Enabled), or by
allowing the BIOS or OS to choose the configuration (Auto).
I
I
Mode:
IrDA
FIR
[FIR]
When the infrared port is enabled this option is available allowing
the user to set the mode for the infrared port.
I
I
I
I
I/O Address:
3F8 - 3FF
2F8 - 2FF
3E8 - 3EF
2E8 - 2EF
[2E8 - 2EF]
Allows user to set the infrared port I/O address when the
infrared port is Enabled.
I
I
I
Interrupt:
IRQ 3
IRQ 4
IRQ 5
[IRQ 3]
Allows user to set the infrared port interrupt when the infrared
port is Enabled.
I
I
I
I
I/O address:
100 - 107
108 - 10F
110 - 117
118 - 11F
[118 - 11F]
Allows user to set the infrared port I/O address when the
infrared port is Enabled.
I
I
DMA Channel:
Parallel Port:
DMA 1
DMA 3
[DMA 3]
[Enabled]
Allows user to set the infrared port DMA Channel when the
infrared port is Enabled.
I
I
I
Disabled
Enabled
Auto
Configures the parallel port using either no configuration
(Disabled), a user defined configuration (Enabled), or by
allowing the BIOS or OS to choose the configuration (Auto).
I
I
I
Mode:
Output Only
Bi-directional
ECP
[Bi-directional]
When the parallel port is enabled this option is available allowing
the user to set the mode for the parallel port. Bi-directional allows
two-way transfer of information between your notebook and a
connected parallel device. Output Only (Half Duplex) allows
information to be transferred in only one direction, from your
notebook to the printer or similar device. ECP Mode allows
communication with the ECP class of parallel I/O devices.
I
I
I
I/O address:
Interrupt:
378 - 37F
278 - 27F
3BC - 3BF
[378 - 37F]
[IRQ 7]
Allows user to set the parallel port base I/O address when the
parallel port is Enabled.
I
I
IRQ 5
IRQ 7
Allows user to set the parallel port interrupt when the parallel
port is Enabled.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
L i f e B o o k
S
S e r i e s B I O S
Keyboard/Mouse Features Submenu of the Advanced Menu
The Keyboard/Mouse Features submenu is for setting
the parameters of the integrated and external mouse
and keyboard.
PhoenixBIOS Setup Utility
Advanced
Security
Power Savings
Exit
Keyboard/Mouse Features
Item Specific Help
Numlock:
Hot Plug:
[Auto]
[Enabled]
Select power-on state
for Numlock.
Internal Pointing Device: [Auto Disabled]
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
Enter Select
F9 Setup Defaults
F10 Save and Exit
Sub-Menu
Figure 6. Keyboard/Mouse Features Submenu
Table 6: Fields, Options and Defaults for the Keyboard/Mouse Submenu of the Advanced Menu
Menu Field
Options
Default
Description
I
Numlock:
Auto
On
Off
[Auto]
Sets the NumLock function state when the computer
completes booting.
I
I
I
Hot Plug:
Disabled
Enabled
[Enabled]
Enables and disables the ability to plug a mouse or keyboard into
the PS/2 port and have it immediately recognized and active.
I
I
Internal Pointing
Device:
Auto Disabled
Manual Setting
Always Enabled
Always Disabled
[Auto Disabled]
Sets the device controlling the mouse cursor on the screen.
Always Enabled makes the pointing device always enabled
whether there is an external mouse or not. Always Disabled makes
the pointing device always disabled. Auto Disabled disables the
internal pointing device when an external pointing device is
connected to the PS/2 port. Manual Setting allows the device to be
enabled or disabled using a Hot Key.
I
I
I
14
Download from Www.Somanuals.com. All Manuals Search And Download.
A d v a n c e d M e n u
Video Features Submenu of the Advanced Menu
The Video Features Submenu is for setting the
display parameters.
PhoenixBIOS Setup Utility
Security Power Savings Exit
Main
Advanced
Video Features
Item Specific Help
Display
[Internal Flat Panel]
Select display terminal.
Compensation: [Disabled]
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
Enter Select
F9 Setup Defaults
F10 Save and Exit
Sub-Menu
Figure 7. Video Features Submenu
Table 7: Fields, Options and Defaults for the Video Features Submenu of the Advanced Menu
Menu Field
Options
Default
Description
I
Display:
Internal
[Internal
Flat Panel]
Selects where the video signal will be routed.
Flat Panel
I
External
Simultaneous
I
I
Compensation:
Disabled
Enabled
[Disabled]
Enables or disables compensation which controls spacing on the
display. When enabled, displays with less than pixel resolution
800 x 600 will still cover the entire screen.
I
15
Download from Www.Somanuals.com. All Manuals Search And Download.
L i f e B o o k
S
S e r i e s B I O S
Internal Device Configurations Submenu of the Advanced Menu
The Internal Device Configuration submenu allows the
user to configure other internal devices.
PhoenixBIOS Setup Utility
Main
Advanced
Security
Power Savings
Exit
Internal Device Configurations
Item Specific Help
Floppy Disk Contoller: [Disabled]
[Disabled]
IDE Controller:
LAN Controller:
[Enabled]
[Auto]
Floppy disk drive is
disabled.
[Enabled]
Floppy disk drive is
enabled.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
Enter Select Sub-Menu
F9 Setup Defaults
F10 Save and Exit
Figure 8. Internal Device Configuration Submenu
Table 8: Fields, Options and Defaults for the Internal Device Configuration Submenu of the Advanced Menu
Menu Field
Options
Default
Description
I
Floppy Disk
Controller:
Disabled
Enabled
[Disabled]
Enables or disables the Floppy Disk Drive.
I
I
IDE Controller:
LAN Controller:
Disabled
Enabled
[Enabled]
[Auto]
Enables or disables selected IDE devices.
Enables or disables the LAN device.
I
I
Disabled
Enabled
Auto
I
I
16
Download from Www.Somanuals.com. All Manuals Search And Download.
A d v a n c e d M e n u
PCI Configuration Submenu of the Advanced Menu
The PCI Configuration submenu allows the user to
reserve specific interrupts (IRQs) for legacy ISA devices,
and to enable or disable built in PCI device modules.
PhoenixBIOS Setup Utility
Main
Advanced
Security
Power Savings
Exit
PCI Configuration
IRQ Reservation
Item Specific Help
Reserve specific IRQs
for use by legacy ISA
devices.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
F9 Setup Defaults
F10 Save and Exit
Enter Select
Sub-Menu
Figure 9. PCI Configuration Submenu
Table 9: Fields, Options and Defaults for the PCI Configuration Submenu of the Advanced Menu
Menu Field
Options
Default
Description
IRQ Reservation
–—
–—
Reserve specific IRQs for use by legacy ISA devices.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
L i f e B o o k
S
S e r i e s B I O S
IRQ Reservation Submenu of the PCI Configuration Submenu
The IRQ Reservation submenu of the PCI Configuration
C A U T I O N
submenu allows the user to mark various IRQs as
reserved for use by legacy ISA devices. When an IRQ
is reserved, the BIOS does not use it for embedded PCI
Only IRQ's 9, 10, & 11 can be reserved without conflict.
or ISA devices.
PhoenixBIOS Setup Utility
Main
Advanced
Security
Power Savings
Exit
IRQ Reservation
Item Specific Help
IRQ 3:
IRQ 4:
IRQ 5:
IRQ 7:
IRQ 9:
IRQ 10:
IRQ 11:
IRQ 15:
[Available]
[Available]
[Available]
[Available]
[Available]
[Available]
[Available]
[Available]
Reserve the specified
IRQ for use by legacy
ISA devices.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
F9 Setup Defaults
F10 Save and Exit
Enter Select
Sub-Menu
Figure 10. IRQ Reservation Submenu
Table 10: Fields, Options and Defaults for the IRQ Reservation Submenu of the
PCI Configuration Submenu of the Advanced Menu
Menu Field
Options
Default
Description
I
IRQ 3:
Available
Reserved
[Available]
Reserves IRQ 3. If Reserved is selected, the BIOS reserves IRQ 3 for
use by legacy ISA devices and does not use it for embedded PCI or
ISA devices. IRQ 3 is removed from the IRQ bitmap in the PCI IRQ
routing table.
I
I
IRQ 4:
IRQ 5:
IRQ 7:
Available
Reserved
[Available]
[Available]
[Available]
Reserves IRQ 4.
Reserves IRQ 5.
Reserves IRQ 7.
I
I
Available
Reserved
I
I
Available
Reserved
I
18
Download from Www.Somanuals.com. All Manuals Search And Download.
A d v a n c e d M e n u
Table 10: Fields, Options and Defaults for the IRQ Reservation Submenu of the
PCI Configuration Submenu of the Advanced Menu
Menu Field
Options
Default
Description
I
IRQ 9:
Available
Reserved
[Available]
Reserves IRQ 9.
I
I
IRQ 10:
IRQ 11:
IRQ 15:
Available
Reserved
[Available]
[Available]
[Available]
Reserves IRQ 10.
Reserves IRQ 11.
Reserves IRQ 15.
I
I
Available
Reserved
I
I
Available
Reserved
I
19
Download from Www.Somanuals.com. All Manuals Search And Download.
L i f e B o o k
S
S e r i e s B I O S
CPU Features Submenu of the Advanced Menu
The CPU Features Submenu configures the
system Processor.
PhoenixBIOS Setup Utility
Main
Advanced
Security
Power Savings
Exit
CPU Features
Item Specific Help
Processor Serial Number: [Disabled]
Intel(R) SpeedStep(TM) Technology: [Auto]
Configures Processor
Serial Number feature
of Pentium(R) III
processor.
[Disabled]
Processor Serial Number
feature is disabled.
[Enabled]
Processor Serial Number
feature is enabled.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
Enter Select Sub-Menu
F9 Setup Defaults
F10 Save and Exit
Figure 11. CPU Features Submenu
Menu Field
Options
Default
Description
I
I
Processor Serial
Number
Enabled
Disabled
[Disabled]
Configures Processor Serial Number feature.
I
I
I
I
Intel(R)
SpeedStep(TM)
Technology
Auto
[Auto]
When Auto is selected, the CPU speed changes based upon the
power source change. When Max. Perf. is selected, the CPU speed
is maximized. When Batt. Opt. is selected, the CPU speed is opti-
mized for battery operation. When Disabled is selected, the CPU
speed is fixed to the battery optimized speed.
Max. Perf.
Batt. Opt.
Disabled
20
Download from Www.Somanuals.com. All Manuals Search And Download.
A d v a n c e d M e n u
USB Features Submenu of the Advanced Menu
The USB Features Submenu configures the USB features
for your system.
PhoenixBIOS Setup Utility
Main
Advanced
Security
Power Savings
Exit
USB Features
Item Specific Help
USB Floppy Disk:
[Enabled]
[Disabled]
Legacy Floppy Emulation
is disabled.
[Enabled]
Legacy Floppy Emulation
is enabled and USB
floppy is available
without USB aware OS.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
Enter Select
F9 Setup Defaults
F10 Save and Exit
Sub-Menu
Figure 12. USB Features Submenu
Table 12: Fields, Options and Defaults for the ACPI Features Submenu of the Advanced Menu
Menu Field
Options
Default
Description
I
USB Floppy Disk:
Disabled
Enabled
[Enabled]
When Disabled is selected, legacy floppy emulation is disabled.
When Enabled is selected, legacy floppy emulation is enabled and
USB floppy is available without USB-aware OS.
I
21
Download from Www.Somanuals.com. All Manuals Search And Download.
L i f e B o o k
S
S e r i e s B I O S
Event Logging Submenu of the Advanced Menu
The Event Logging Submenu configures event logging
features for DMI events.
PhoenixBIOS Setup Utility
Security Power Savings Exit
Main
Advanced
Event Logging
Item Specific Help
Event Log Capacity:
Event Log Validity:
Space Available
Valid
Press <Enter> key to
view the contents of
the event log.
View Event Log:
[Enter]
Event Logging:
[Enabled]
System Boot Event:
[Disabled]
Clear All Event Logs:
Mark Events as Read:
[No]
[Enter]
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
Enter Select
F9 Setup Defaults
F10 Save and Exit
Sub-Menu
Figure 13. Event Logging Submenu
Table 13: Fields, Options and Defaults for the Event Logging Submenu of the Advanced Menu
Menu Field
Options
Default
Description
Event Log
Capacity:
Space Available
Display only.
Event Log Validity:
View Event Log:
Event Logging:
Valid
Display only.
I
Enter
[Enter]
[Enabled]
Allows you to view content of event log.
Turns event logging on and off for all DMI events.
I
Disabled
Enabled
I
I
System Boot
Event:
Disabled
Enabled
[Disabled]
[No]
Turns event logging on and off for DMI system boot events.
When set to [Yes] all event logs will be cleared at next boot.
Allows you to make all events currently in the event log as read.
I
I
Clear All Event
Logs:
No
Yes
I
I
Mark Events as
Read:
Enter
[Enter]
22
Download from Www.Somanuals.com. All Manuals Search And Download.
S e c u r i t y M e n u
SECURITY MENU – SETTING THE SECURITY FEATURES
The Security menu allows you to set up the data security
features of your notebook to fit your operating needs and
to view the current data security configuration. Follow the
instructions for Navigating Through the Setup Utility to
make any changes. (See Navigating Through the Setup
Utility on page 2 for more information)
P O I N T
If you make an error when re-entering the password
a [Warning] will be displayed on the screen. To try
again press the Enter key and then retype the password.
Press the Esc key to abort the password setting process.
The following tables show the names of the menu
fields for the Security menu and its submenus, all of
the options for each field, the default settings and a
description of the field's function and any special
information needed to help understand the field's use.
The default condition is no passwords required and
no write protection.
C A U T I O N
If the Password on Resume is Enabled and the Password
on Boot is Disabled you will not have to type your
password upon resuming the system from the Suspend
or Save-to-Disk modes. Password on Resume will work
only if Password boot is enabled.
P O I N T
P O I N T
If you set a password, write it down and keep it in a
safe place. If you forget the password you will have to
contact your support representative to regain access to
your secured functions and data.
Boot sector protection must be set to [Normal] to
install or upgrade an operating system.
C A U T I O N
Entering a password incorrectly 3 times in a row will
cause the keyboard and mouse to be locked out and the
warning [System Disabled] to be displayed. If this
happens restart the computer by turning off and on the
power with the power switch and use the correct
password on reboot.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
L i f e B o o k
S
S e r i e s B I O S
PhoenixBIOS Setup Utility
Security Power Boot
Main
Advanced
Info
Exit
Item Specific Help
Supervisor Password Is:
User Password Is:
Clear
Clear
Press [Enter] key to
set Supervisor Password
to enable any password
features.
Set Supervisor Password
Set User Password
Minimum User Password Length: [0]
[Enter]
[Enter]
Password on Boot:
[Disabled]
Then password entry is
required to enter BIOS
Setup.
Password on Unattended Boot:
Password on Resume:
Boot from Removable Media:
Floppy Disk Access:
Hard Disk Security
[Disabled]
[Disabled]
[All]
[All]
Owner Information
Hard Disk Boot Sector:
[Normal]
Security Panel on Resume:
[Enabled]
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
Enter Select Sub-Menu
F9 Setup Defaults
F10 Save and Exit
Figure 14. Security Menu
Table 14: Fields, Options and Defaults for the Security Menu
Menu Field
Options
Default
Description
Supervisor
Password is:
–—
Clear
A display-only field. Set is displayed when the system Supervisor
Password is set and Clear when it is not.
User Password is:
–—
Clear
A display-only field. Set is displayed when the general User
Password is set, and Clear when it is not.
Set Supervisor
Password
[Enter]
[Enter]
Sets, changes or cancels the Supervisor Password. The Supervisor
Password may be up to seven characters long and must include
only letters or numbers (no symbols). Passwords are NOT case-
sensitive. To cancel a password press the Enter key instead of
entering characters in the Enter New Password field and in the
Re-enter New Password field. When a Supervisor Password is set
it must be used to access the BIOS setup utility.
Set User Password
[Enter]
[Enter]
This field can only be accessed if the Supervisor Password is set.
Sets, changes or cancels the User Password. The User Password
may be up to seven characters long and must include only letters
or numbers (no symbols). Passwords are NOT case-sensitive. To
cancel a password press the Enter key instead of entering characters
in the Enter New Password field and in the Re-enter New Password
field. When a User Password is set it must be used to access the
BIOS setup utility.
Minimum User
[0]
[0]
Sets the minimum length for User Password.
Password Length:
24
Download from Www.Somanuals.com. All Manuals Search And Download.
S e c u r i t y M e n u
Table 14: Fields, Options and Defaults for the Security Menu
Menu Field
Options
Default
Description
I
Password on Boot:
Disabled
First Boot
Every Boot
[Disabled]
When set to Enabled, a password (User or Supervisor) is required
after the Power On Self Test (POST) before the operating system
will be read from a disk. When set to Disabled no password is
required. If no Supervisor Password is set this feature is not avail-
able and no password is required.
I
I
I
I
Password on
Unattended Boot:
Disabled
Enabled
[Disabled]
[Disabled]
When enabled, the PS/2 keyboard and mouse are locked out upon
unattended boot (via LAN) until a password is entered. When both
passwords are set, the USer password is always used to lock. Enter-
ing a password before an OS boot is disabled during unattended
boot.
I
I
Password on
Resume:
Disabled
Enabled
When set to Enabled, a password (User or Supervisor) is required
before the operating system will resume. When set to Disabled no
password is required. If no Supervisor Password is set this feature is
not available and no password is required.
I
I
Boot from Remov-
able Media:
All
[All]
[All]
Enable password allows supervisor access only.
Enable password allows supervisor access only.
Supervisor only
I
I
Floppy Disk
Access:
All
Supervisor only
Hard Disk Security:
–—
–—
–—
–—
Configures hard disk security features.
Sets Owner information.
Owner
Information:
I
Hard Disk Boot
Sector:
Normal
Write Protected
[Normal]
[Enabled]
Sets protection mode for hard disk drive.
I
I
I
Security Panel on
Resume:
Disabled
Enabled
Allows you to enable or disable the Security Panel upon Resume
from Suspend.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
L i f e B o o k
S
S e r i e s B I O S
Hard Disk Security Submenu of the Security Menu
The Hard Disk Security Submenu is for configuring
hard disk security features.
PhoenixBIOS Setup Utility
Security Power Savings Exit
Main
Advanced
Hard Disk Security
Item Specific Help
[Disabled]
[Disabled]
The feature is disabled.
Primary Master:
Primary Slave:
[Disabled]
[Enabled]
The hard disk is locked
with the password.
Data in the locked disk
cannot be read on any
systems other than the
original system on which
it is locked or systems
that have the identical
password setting.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
F9 Setup Defaults
F10 Save and Exit
Enter
Select
Sub-Menu
Figure 15. Hard Disk Security Submenu
Table 15: Fields, Options and Defaults for the Hard Disk Security Submenu of the Security Menu
Menu Field
Options
Default
Description
I
Primary Master:
Disabled
Enabled
[Disabled]
Disabled: No password protection.
Enabled: Hard drive password protected. Password must be entered
to access data on drive.
I
I
Primary Slave:
Disabled
Enabled
[Disabled]
Disabled: No password protection.
Enabled: Hard drive password protected. Password must be entered
to access data on drive.
I
26
Download from Www.Somanuals.com. All Manuals Search And Download.
S e c u r i t y M e n u
Owner Information Submenu of the Security Menu
The Owner Information Submenu is for setting
owner information.
PhoenixBIOS Setup Utility
Security Power Savings Exit
Main
Advanced
Owner Information
Item Specific Help
Owner Information Is:
Set Owner Information
Clear
Press <Enter> key to
set owner information.
Up to 80 characters can
be set. Available
characters are ASCII
codes from 32 through
126.
[Enter]
Foreground Color:
Background Color:
[Gray]
[Black]
The owner information
is always displayed at
the bottom line of the
screen during POST.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
Enter Select Sub-Menu
F9 Setup Defaults
F10 Save and Exit
Figure 16. Owner Information Submenu
Table 16: Fields, Options and Defaults for the Owner Information Submenu of the Security Menu
Menu Field
Options
Default
Description
Owner
–—
Clear
Display only.
Information Is:
Set Owner
–—
[Enter]
Field to write owner information, i.e. name.
Information:
27
Download from Www.Somanuals.com. All Manuals Search And Download.
L i f e B o o k
S
S e r i e s B I O S
Table 16: Fields, Options and Defaults for the Owner Information Submenu of the Security Menu
Menu Field
Options
Default
Description
I
I
I
I
I
I
I
I
I
Foreground Color:
Black
Blue
Green
Cyan
Red
Magenta
Brown
White
Gray
[Gray]
Set foreground color.
I
Light Blue
Light Green
Light Cyan
Light Red
Light Magenta
Yellow
I
I
I
I
I
I
Bright White
I
I
I
I
I
I
I
I
I
Background Color:
Black
Blue
Green
Cyan
Red
Magenta
Brown
White
Gray
[Black]
Sets background color.
I
Light Blue
Light Green
Light Cyan
Light Red
Light Magenta
Yellow
I
I
I
I
I
I
Bright White
Exiting from the Security Menu
When you have finished setting the parameters on the
Security Menu, you can either exit from setup utility or
move to another menu. If you wish to exit from setup
utility, press the Esc key to go to the Exit Menu. If you
wish to move to another menu, use the cursor keys.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
P o w e r M e n u
POWER MENU – SETTING POWER MANAGEMENT FEATURES
The Power menu allows you to set and change the power
C A U T I O N S
management parameters. Follow the instructions for
Navigating Through the Setup Utility to make any
changes. (See Navigating Through the Setup Utility on
page 2 for more information)
I
In Save-to-Disk mode there is no indication on the
Status Indicator to let you know you are suspended
rather than shut off from the power switch. You may
want to make a habit of always trying the Suspend/
Resume button before using the power switch.
Resume on Modem ring when enabled will draw
power from the bridge battery alone when your
system is running off battery power. This may poten-
tially drain your bridge battery. Disabling Resume on
Modem ring will prevent this from happening.
The following tables show the names of the menu fields
for the Power menu and its submenus, all of the options
for each field, the default settings and a description of
the field's function and any special information needed
I
to help understand the field's use.
I
P O I N TS
I
In Windows 98 Auto-suspend Timeout, Hard Disk
Timeout, and Video Timeout features are available
exclusively through the operating system.
When resuming from a Save-to-Disk suspension there
I
will be a delay while the contents of system memory
and operating parameters are loaded from the hard
drive.
PhoenixBIOS Setup Utility
Security Power Boot
Main
Advanced
Info
Exit
Item Specific Help
Power Savings:
[Customized]
[Off]
[Off]
[4 Minutes]
[15 Minutes]
Hard Disk Timeout:
Display Timeout:
Standby Timeout:
Auto Suspend Timeout:
Select Power Management
Mode. Choosing modes
changes system power
management settings.
Maximum Power Savings
conserves the greatest
amount of system power
while Maximum
Suspend Mode:
Auto Save To Disk:
[Suspend]
[Off]
Resume On Modem Ring:
Resume On Time:
Resume Time:
[Off]
[Off]
[00:00:00]
Performance conserves
power but allows
greatest system
performance. To alter
these setting, choose
Customize. To turn off
power management,
Advanced Features
choose Disabled.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
Enter Select Sub-Menu
F9 Setup Defaults
F10 Save and Exit
Figure 17. Power Menu
29
Download from Www.Somanuals.com. All Manuals Search And Download.
L i f e B o o k
S
S e r i e s B I O S
Table 17: Fields, Options and Defaults for the Power Menu (for APM operating systems only)
Menu field
Options
Default
Description
I
Power Savings:
Disabled
Customized
Maximum
Power Savings
Maximum
Performance
[Customized]
Sets the power savings parameters to a factory installed
combination of parameters, a custom set of parameters set
by you or no power saving features.
I
I
I
I
I
Hard Disk Timeout:
Off
[Off]
Sets the length of time that the hard drive can be inactive before
your notebook automatically turns off the power to the hard drive
controller and drive motor. If you choose a factory installed
combination of parameters this field will display the setting. If
you choose to customize the parameters you will be able to set
this yourself. The options available vary from Off, which has no
inactivity shutoff, to 20 minutes.
30 seconds to 20
Minutes
I
I
Display Timeout:
Standby Timeout:
Off
[Off]
Sets the length of time without any user input device activity before
the display is turned off. If you choose a factory combination of
parameters, this field will display the setting. If you choose to
customize the parameters, you will be able to set this yourself.
Off has no inactivity shutoff.
2 to 20 Minutes
I
I
Off
[4 Minutes]
[15 Minutes]
[Suspend]
Sets the length of time without any user input device activity
before the CPU is set to half speed and the display and the hard
drive are turned off. If you choose a factory combination of
parameters this field will display the setting. If you choose to
customize the parameters you will be able to set this yourself.
1 to 16 Minutes
I
I
Auto Suspend
Timeout:
Off
Sets the length of time without any I/O activity before your note-
book goes into Suspend mode. If you choose a factory combination
of parameters this field will display that setting. If you choose to
customize the parameters you will be able to set this yourself. Off
has no inactivity suspension.
5 to 60 minutes
I
I
Suspend Mode:
Suspend
Save to Disk
Sets the form of suspension state. If you choose Suspend, you will
suspend operation with power to system memory, and everything
else powered down or in a very low power state. If you choose
Save-to-Disk your notebook will save all of system memory and
the operating parameters to the hard drive before turning your
notebook to the pseudo-off condition.
*To use Save to
Disk automatically
in Windows 98, set
Suspend Mode to
Save to Disk mode.
I
Auto Save
To Disk:
Off
After 1 Hour
[Off]
[Off]
[Off]
When set to After 1 Hour your notebook will automatically
save all of system memory and the operating parameters to the
hard drive and go to the pseudo-off if you leave your notebook in
Suspend mode for an hour.
I
I
Resume On
Modem Ring:
Off
On
Sets whether or not to Resume from a suspension state when a
message is received by telephone line. This feature will not operate
if the Save-to-Disk mode is enabled. This feature applies to internal
and external modems.
I
I
Resume On Time:
Off
On
Sets whether or not to resume from a suspension state at a
designated time. This feature is available from either the Suspend
mode or the Save-to-Disk mode.
I
30
Download from Www.Somanuals.com. All Manuals Search And Download.
P o w e r M e n u
Table 17: Fields, Options and Defaults for the Power Menu (for APM operating systems only)
Menu field
Options
Default
Description
I
Resume Time:
00:00:00 to
23:59:59
[00:00:00]
Sets the designated time, on a 24-hour clock, when the notebook
is to automatically resume operation from the Suspend state.
The format of the clock setting is hours:minutes:seconds. Each
segment of the time is set separately, either by incrementing or by
typing in the numbers. You move between the segments with the
[Tab] key or the [Shift]+[Tab] keys. This only applies when Resume
on Time is set to On.
Advanced
Features:
–—
–—
When selected, opens the Advanced Features submenu which
allows setting additional power saving parameters.
Factory Installed Values for Power Saving Profiles (for APM operating systems only)
Hard Disk
Timeout
Display Timeout
Standby Timeout
Auto Suspend
Timeout
Customized:
Off
Off
4 Minutes
1 Minute
Off
15 Minutes
5 Minutes
15 Minutes
Off
Maximum Power Savings:
Maximum Performance:
Disabled:
30 Seconds
Off
2 Minutes
Off
Off
Off
Off
Sample Customized Profile: (To get even
better battery life keep the display and
volume settings as low as possible and use
the sample customized profile.)
2 Minutes
1 Minute
1 Minute
5 Minutes
31
Download from Www.Somanuals.com. All Manuals Search And Download.
L i f e B o o k
S
S e r i e s B I O S
Advanced Features Submenu of the Power Menu
The Advanced Features submenu is for setting some
non-time related power saving parameters.
PhoenixBIOS Setup Utility
Power
Advanced Features
Item Specific Help
Suspend/Resume Switch:
Lid Closure Suspend:
Lid Open Resume:
[Enabled]
[On]
[On]
Configures the
Suspend/Resume switch.
Resume on LAN:
[Off]
Serial Mouse Activity:
[Disabled]
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
F9 Setup Defaults
F10 Save and Exit
Enter
Select
Sub-Menu
Figure 18. Advance Features Submenu
Table 18: Fields, Options and Defaults for the Advanced Features Submenu of the Power Menu
Menu Field
Options
Default
Description
I
Suspend/Resume
Switch:
Disabled
Enabled
[Enabled]
Sets the function of the Suspend/Resume button when your
notebook is in an active state. The resume function can not
be disabled as it works regardless of any other settings.
I
I
Lid Closure
Suspend:
Off
On
[On]
Enables and disables having closure of the Display panel put your
notebook in Suspend mode.
I
I
Lid Open Resume:
Off
On
[On]
Enables and disables having opening the Display panel acting as
an automatic resume.
I
I
Resume of LAN:
Off
On
[Off]
Enables and disables having LAN activity cause the system to
reactivate from inactivity timeouts.
I
I
Serial Mouse
Activity:
Disabled
Enabled
[Disabled]
Enables and disables having activity on the serial port cause the
system to reactivate from inactivity timeouts.
I
Exiting from Power Menu
or move to another menu. If you wish to exit from the
setup utility press the Esc key to go to the Exit menu. If
you wish to move to another menu, use the cursor keys.
When you have finished setting the boot parameters with
the Power menu, you can either exit from the setup
utility
32
Download from Www.Somanuals.com. All Manuals Search And Download.
B o o t M e n u
BOOT MENU – SELECTING THE OPERATING SYSTEM SOURCE
The Boot Menu is used to select the order in which the
BIOS searches sources for the operating system. Follow
the instructions for Navigating Through the Setup
Utility to make any changes. (See Navigating Through the
Setup Utility on page 2 for more information)
The following tables show the names of the menu fields
for the Boot menu and its submenu, all of the options
for each field, the default settings and a description of
the field's function and any special information needed
to help understand the field's use.
PhoenixBIOS Setup Utility
Main
Advanced
Security
Power Savings
Boot
Info
Exit
Item Specific Help
[Enabled]
Quick Boot:
Boot Time Diagnostic Screen:
[Disabled]
[Disabled]
All diagnostic tests
will be done.
Preboot Execution Environment:
Boot Device Priority
[Disabled]
[Enabled]
Some diagnostic tests
may be skipped while
booting to speed up.
[Auto]
Diagnostic tests will
be automatically
skipped or done
according to the order
of the ACPI OS.
F1 Help
ESC Exit
Select Item -/Space Change Values
Select Menu Enter
Select Sub-Menu
F9 Setup Defaults
F10 Save and Exit
Figure 19. Boot Menu
Table 19: Fields, Options and Defaults for the Boot Menu
Menu Field
Options
Default
Description
I
QuickBoot:
Disabled
Enabled
Auto
[Enabled]
Turns on and off booting with a truncated set of Power On Self
Test. (Fewer tests mean faster turn on.)
I
I
I
Boot Time
Diagnostic Screen:
Disabled
Enabled
[Disabled]
[Disabled]
—
Turns on and off display of test results instead of Fujitsu logo screen
during Power On Self Test.
I
I
Preboot Execution
Environment:
Disabled
Enabled
Turns on and off boot from network server options.
I
Boot Device
Priority:
This menu allows setting up the source for the operating system.
See “The Boot Device Priority Submenu” in the following section.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
L i f e B o o k
S
S e r i e s B I O S
The Boot Device Priority Submenu of the Boot Menu
The Boot Device Priority Submenu is for setting the
order of checking of sources for the operating system.
PhoenixBIOS Setup Utility
Main
Advanced
Security
Power Savings
Boot
Boot Device Priority
Item Specific Help
+Floppy Disk Drive
+Hard Disk Drive
ATAPI CD-ROM Drive
The top device has the
highest priority.
<Enter> expands or
collapses devices with
a + or -.
<Ctrl+Enter> expands
all.
< > or < > selects a
device.
<+>/<Space> or <->
moves the device up or
down.
<Shift+1> enables or
disables a device.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
F9 Setup Defaults
F10 Save and Exit
Enter
Select
Sub-Menu
Figure 20. Boot Device Priority Submenu
Table 20: Fields, Options and Defaults for the Boot Device Priority Submenu of the Boot Menu
Menu Field
Options
Default
Description
+Floppy Disk Drive
–—
–—
The boot selections determine the order in which the BIOS searches
for the operating system during a startup sequence. To change the
order highlight one source by using the [up] or [down] cursor keys
and then press the [+] or [-] key to change the order number for
that source. Be sure to save your changed order when you exit the
BIOS setup utility.
+Hard Disk Drive
–—
–—
–—
–—
–—
–—
ATAPI CD-ROM
Drive
Exiting from Boot Menu
When you have finished setting the boot parameters with
the Boot menu, you can either exit from the setup utility
or move to another menu. If you wish to exit from the
setup utility press the Esc key to go to the Exit menu. If
you wish to move to another menu, use the cursor keys.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
I n f o M e n u
INFO MENU – DISPLAYS BASIC SYSTEM INFORMATION
The Info menu is a display only screens that provides the
configuration information for your notebook.
P O I N T S
The following table shows the names of the menu fields
I
The asset number is an optional user-entered field
for the Info menu and the information displayed in
those fields. These fields are for information purposes
only, and are not editable (except for the Asset Number
as in the Point below).
and can be entered through the use of third party
DMI Compliant software, such as LANdesk Client
Manager.
I
The information, including CPU type and speed, and
total memory, displayed on this screen varies accord-
ing to the unit you purchased.
PhoenixBIOS Setup Utility
Security Power Savings
Main
Advanced
Boot
Info
Exit
Item Specific Help
BIOS Version:
BIOS Date:
BIOS Area:
1.53
04/17/2001
E000h - FFFFh
CPU Type:
CPU Speed:
L1 Cache:
L2 Cache:
Pentium(R) III processor
750 MHz
32 KB
256 KB
Total Memory:
Memory Slot:
128 MB
128 MB SDRAM
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
Enter Select Sub-Menu
F9
Setup Defaults
F10 Save and Exit
Figure 21. Info Menu
35
Download from Www.Somanuals.com. All Manuals Search And Download.
L i f e B o o k
S
S e r i e s B I O S
Table 21: Fields, Options and Defaults for the Info Menu
Note that the parameters listed in the following table may be different, depending upon the configuration of your
system.
Menu Field
BIOS Version:
BIOS Date:
BIOS Area:
CPU Type:
Options
–—
Default
1.53
–—
–—
–—
–—
–—
04/17/2001
E000h – FFFFh
–—
–—
Pentium(R) III
processor
CPU Speed:
L1 Cache:
–—
–—
–—
–—
–—
750MHz
32KB
–—
–—
–—
–—
–—
L2 Cache:
256KB
Total Memory:
Memory Slot:
128MB
128MB SDRAM
36
Download from Www.Somanuals.com. All Manuals Search And Download.
E x i t M e n u
EXIT MENU – LEAVING THE SETUP UTILITY
The Exit Menu is used to leave the setup utility. Follow
the instructions for Navigating Through the Setup
Utility to make any changes. (See Navigating Through the
Setup Utility on page 2 for more information)
The following table shows the names of the menu fields
for the Exit menu, the default settings and a description
of the field's function and any special information
needed to help understand the field's use.
PhoenixBIOS Setup Utility
Security Power Savings
Main
Advanced
Boot
Exit
Item Specific Help
Exit Saving Changes
Exit Discarding Changes
Load Setup Defaults
Discard Changes
Exit System Setup and
save your changes to
CMOS.
Save Changes
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
Enter Select Sub-Menu
F9
Setup Defaults
F10 Save and Exit
Figure 22. Exit Menu
Table 22: Fields, Options and Defaults for the Exit Menu
Optional
Menu Field
Default
Description
Keyboard Shortcut
Exit Saving
Changes
Press F10 key.
–—
Exit Saving Changes and Exit will store all the entries on every
menu of the setup utility to the BIOS memory and then exit the
setup utility. A confirmation message Save Configuration
changes and exit now? [Yes] [No] will be displayed.
Exit Discarding
Changes
–—
–—
Selecting Exit Discarding Changes and Exit will exit the setup
utility with out writing to the BIOS memory. When the BIOS
recognizes this selection it will load the operating system and
begin operation.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
L i f e B o o k
S
S e r i e s B I O S
Table 22: Fields, Options and Defaults for the Exit Menu
Optional
Menu Field
Default
Description
Keyboard Shortcut
Load Setup
Defaults
Press F9 key.
–—
Selecting Load Setup Defaults will load the factory preset default
values for all menu fields, then display the message Load
default configuration now? [Yes] [No]. When con-
firmed the setup utility will return to the Exit Menu. To return to
another menu follow the directions in the Navigating Through the
Setup Utility Section.
Discard Changes
Save Changes
–—
–—
–—
–—
Selecting Discard Changes will load the previous values in BIOS
memory for all menu fields. The message Load previous now?
[Yes] [No] will be displayed. When confirmed the setup utility
will return to the Exit menu. To return to another menu, follow the
directions in the Navigating Through the Setup Utility Section.
Selecting Save Changes will cause the new settings in all menus to
be written to the BIOS memory. The message Save configura-
tion changes now? [Yes] [No] will be displayed. When
confirmed, the setup utility will return to the Exit menu. To return to
another menu, follow the directions in the Navigating Through the
Setup Utility section.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
|