Fujitsu Laptop P 2046 User Manual

Fujitsu LifeBook

P Series

BIOS Guide

LifeBook P Series Model:

P-2046

Document Date: 02/01/02

Document Part Number: FPC58-0652-01

F U J I T S U P C C O R P O R AT I O N

Download from Www.Somanuals.com. All Manuals Search And Download.

M a i n M e n u B I O S

MAIN MENU – SETTING STANDARD SYSTEM PARAMETERS

The Main Menu allows you to set or view the current

system parameters. Follow the instructions for

Navigating Through the Setup Utility to make any

changes.

the field’s function and any special information needed

to help understand the field’s use.

P O I N T

The following tables show the names of the menu fields

for the Main menu and its submenus, all of the options

for each field, the default settings and a description of

System Time and System Date can also be set from your

operating system without using the setup utility. Use

the calendar and time icon on your Windows Control

Panel.

PhoenixBIOS Setup Utility

Main

Advanced

Security

Power

Boot

Info

Exit

Item Specific Help

System Time:

System Date:

[14:57:01]

[01/26/2002]

Adjust calendar clock.

Primary Master

Secondary Master

[TOSHIBA MK2018GAP-(PM)]

[SONY CD-ROM CRX800E-(SM)]

<Tab>, <Shift-Tab>, or

<Enter> selects field.

Language:

[English (US)]

F1 Help

ESC Exit

Select Item

Select Menu

-/Space Change Values

F9 Setup Defaults

F10 Save and Exit

Enter Select

Sub-Menu

Figure 1. Main Menu

Download from Www.Somanuals.com. All Manuals Search And Download.

L i f e B o o k

S e r i e s B I O S

Menu Field

Options

Default

Description

System Time:

–—

Sets and displays the current time. Time is in a 24 hour format of

hours:minutes:seconds with 2 digits for each. (HH:MM:SS). Exam-

ple: 16:45:57. You may change each segment of the time

separately. Move between the segments with the [Tab] key and/or

[Shift] + [Tab] keys.

System Date:

–—

Sets and displays the current date. Date is in a month/day/year

numeric format with 2 digits each for month and day and 4 digits

for year. (MM/DD/YYYY) for example: 03/20/1998. You may

change each segment of the date separately. Move between the

segments with the [Tab] key and/or [Shift] + [Tab] keys.

Primary Master:

Selects Primary

Master submenu

–—

Displays the type of device on this ATA/ATAPI interface, if there is

one. Pressing the Enter key selects the Primary Master submenu

allowing additional device configuration options for this interface.

Secondary

Master:

Selects Secondary

Master submenu

–—

Displays the type of device on this ATA/ATAPI interface, if there is

one. Pressing the Enter key selects the Secondary Master submenu

allowing additional device configuration options for this interface.

Language:

• English (US)

• Japanese (JP)

[English (US)]

The default setting differs between the US/European and the Japa-

nese model. Selects the display language for the BIOS.

Download from Www.Somanuals.com. All Manuals Search And Download.

M a i n M e n u

Note: Actual hard drive label shown may vary. Depending

on the drive type, information such as cylinders, heads and

sectors may also be displayed.

Primary Master Submenu of the Main Menu

The Primary Master submenu identifies which ATA

devices are installed.

PhoenixBIOS Setup Utility

Security Power Boot

Main

Advanced

Info

Exit

Item Specific Help

Primary Master [TOSHIBA MK2018GAP-(PM)]

Select ATA/ATAPI drive

installed here.

Type:

Cylinders:

Heads:

Sectors:

Maximum Capacity:

[Hard Disk]

[16383]

[16]

[63]

8455MB

[Auto]

The BIOS auto-types the

drive on boot time.

Multi-Sector Transfers:

LBA Mode Control:

PIO Transfer Mode:

DMA Transfer Mode:

[16 Sectors]

[Enabled]

[FAST PIO 4]

[Ultra DMA 4]

Except [Auto]

You enter parameters of

the drive.

[None]

The drive is disabled.

F1 Help

ESC Exit

Select Item

Select Menu

-/Space Change Values

Setup Defaults

Enter

Select

Sub-Menu

F10 Save and Exit

Figure 2. Primary Master Submenu

Table 2: Fields, Options and Defaults for the Primary Master Submenu of the Main Menu

Menu Field

Options

Default

Description

Type:

• Auto

• None

• Hard Disk

• CD-ROM

[Auto]

Selects the ATA/ATAPI device type. Select Auto to have the type

automatically identified by the BIOS at POST. If None is selected, all

of the following Set-up items do not appear. If Hard Disk is

selected, you must specify the number of Cylinders, Heads, and

Sectors for the drive. Select CD-ROM to select parameters for CD-

ROM drive.

Cylinders:

• A number

between 0

and 65,535

–—

This item appears only when the type is identifed as Hard Disk.

When Hard Disk is selected, you can change the value. This field is

changed by incrementing (pressing the [Spacebar]) or by typing in

the number.

Heads:

• A number

between 1

and 16

This item appears only when the type is identifed as Auto or Hard

Disk. When Hard Disk is selected, you can change the value. This

field is changed by incrementing (pressing the [Spacebar]) or by

typing in the number.

Download from Www.Somanuals.com. All Manuals Search And Download.

L i f e B o o k

S e r i e s B I O S

Table 2: Fields, Options and Defaults for the Primary Master Submenu of the Main Menu

Menu Field

Options

Default

Description

Sectors:

• A number

between 0

and 63

–—

This item appears only when the type is identifed as Auto or Hard

Disk. When Hard Disk is selected, you can change the value. This

field is changed by incrementing (pressing the [Spacebar]) or by

typing in the number.

Maximum

Capacity:

• Display only

–—

Displays the maximum capacity of the drive calculated from the

parameters of the hard disk when Hard Disk is selected.

Multi-Sector

Transfers:

• Disabled

[16 Sectors]

This option cannot be changed when Auto is selected. Specify the

number of sectors per block for multiple sector transfer.

• 2 Sectors

• 4 Sectors

• 8 Sectors

• 16 Sectors

• 32 Sectors

• 64 Sectors

• 128 Sectors

LBA Mode

Control:

• Disabled

• Enabled

[Enabled]

Enables or disables logical Block Addressing in place of Cylinder,

Head, Sector addressing. This option cannot be changed when

Auto is selected.

PIO Transfer

Mode:

• Standard

[Fast PI0 4]

Selects the method for moving data to/from the drive. Autotype

the drive to select the optimum transfer mode. This option cannot

be changed when Auto is selected. Multi-word DMA is automati-

cally set to mode 1 for Fast PIO 1, Fast PIO 2, Fast PIO 3, and set to

mode 2 for Fast PIO 4 / DMA.

• Fast PIO 1

• Fast PIO 2

• Fast PIO 3

• Fast PIO 4

DMA Transfer

Mode:

• Disabled

• Multiword

DMA 1

[Ultra DMA 4]

Selects the method for moving data to/from the drive. Autotype

the drive to select the optimum transfer mode. This option cannot

be changed when Auto is selected.

• Multiword

DMA 2

• Ultra DMA 0

• Ultra DMA 1

• Ultra DMA 2

• Ultra DMA 3

• Ultra DMA 4

Download from Www.Somanuals.com. All Manuals Search And Download.

M a i n M e n u

Note: Actual drive label shown may vary. Depending on

the drive type, information such as cylinders, heads and

sectors may also be displayed.

Secondary Master Submenu of the Main Menu

The Secondary Master submenu identifies which ATA

devices are installed.

PhoenixBIOS Setup Utility

Security Power Boot

Main

Advanced

Info

Exit

Secondary Master [SONY CD-RW CRX800E-(SM)]

Item Specific Help

Select ATA/ATAPI drive

installed here.

Type:

[Auto]]

Multi-Sector Transfers:

LBA Mode Control:

PIO Transfer Mode:

DMA Transfer Mode:

[Disabled]

[Auto]

The BIOS auto-types the

drive on boot time.

Except [Auto]

You enter parameters of

the drive.

[None]

The drive is disabled.

F1 Help

ESC Exit

Select Item

Select Menu

-/Space Change Values

Setup Defaults

Enter

Select

Sub-Menu

F10 Save and Exit

Figure 3. Secondary Master Submenu

Table 3: Fields, Options and Defaults for the Secondary Master Submenu of the Main Menu

Menu Field

Options

Default

Description

Type:

• Auto

• None

• Hard Disk

• CD-ROM

[Auto]

Selects the ATA/ATAPI device type. Select Auto to have the type

automatically identified by the BIOS at POST. If None is selected, all

of the following Set-up items do not appear. If Hard Disk is

selected, you must specify the number of Cylinders, Heads, and

Sectors for the drive. Select CD-ROM to select parameters for CD-

ROM drive.

Cylinders:

Heads:

• A number

between 0

and 65,535

–—

This item appears only when the type is identifed as Hard Disk.

When Hard Disk is selected, you can change the value. This field is

changed by incrementing (pressing the [Spacebar]) or by typing in

the number.

• A number

between 1

and 16

This item appears only when the type is identifed as Auto or Hard

Disk. When Hard Disk is selected, you can change the value. This

field is changed by incrementing (pressing the [Spacebar]) or by

typing in the number.

Download from Www.Somanuals.com. All Manuals Search And Download.

L i f e B o o k

S e r i e s B I O S

Table 3: Fields, Options and Defaults for the Secondary Master Submenu of the Main Menu

Menu Field

Options

Default

Description

Sectors:

• A number

between 0

and 63

–—

This item appears only when the type is identifed as Auto or Hard

Disk. When Hard Disk is selected, you can change the value. This

field is changed by incrementing (pressing the [Spacebar]) or by

typing in the number.

Maximum

Capacity:

• Display only

–—

Displays the maximum capacity of the drive calculated from the

parameters of the hard disk when Hard Disk is selected.

Multi-Sector

Transfers:

• Disabled

[Disabled]

This option cannot be changed when Auto is selected. Specify the

number of sectors per block for multiple sector transfer.

• 2 Sectors

• 4 Sectors

• 8 Sectors

• 16 Sectors

• 32 Sectors

• 64 Sectors

• 128 Sectors

LBA Mode

Control:

• Disabled

• Enabled

[Disabled]

Enables or disables logical Block Addressing in place of Cylinder,

Head, Sector addressing. This option cannot be changed when

Auto is selected.

PIO Transfer

Mode:

• Standard

Selects the method for moving data to/from the drive. Autotype

the drive to select the optimum transfer mode. This option cannot

be changed when Auto is selected. Multi-word DMA is automati-

cally set to mode 1 for Fast PIO 1, Fast PIO 2, Fast PIO 3, and set to

mode 2 for Fast PIO 4 / DMA.

• Fast PIO 1

• Fast PIO 2

• Fast PIO 3

• Fast PIO 4

DMA Transfer

Mode:

• Disabled

• Multiword

DMA 1

[Disabled]

Selects the method for moving data to/from the drive. Autotype

the drive to select the optimum transfer mode. This option cannot

be changed when Auto is selected.

• Multiword

DMA 2

• Ultra DMA 0

• Ultra DMA 1

• Ultra DMA 2

• Ultra DMA 3

• Ultra DMA 4

Download from Www.Somanuals.com. All Manuals Search And Download.

A d v a n c e d M e n u

ADVANCED MENU – SETTING DEVICE FEATURE CONTROLS

The Advanced Menu allows you to:

Follow the instructions for Navigating Through the

Setup Utility to make any changes.

• Enable or disable support for Plug & Play

operating systems.

• Select between the display panel and an external

CRT display.

• Enable or disable compensation for your display.

• Configure PCI devices in your system.

• Configure CPU and USB features.

The following tables show the names of the menu fields

for the Advanced Menu and its submenus, all of the

options for each field, the default settings and a descrip-

tion of the field’s function and any special information

needed to help understand the field’s use.

PhoenixBIOS Setup Utility

Security Power Boot

Main

Advanced

Info

Exit

Item Specific Help

Plug & Play O/S:

[No]

Keyboard/Mouse Features

Video Features

The BIOS configures

also non-boot devices.

Select if you are using

a non-Plug & Play OS or

a non-ACPI OS.

Internal Device Configurations

PCI Configurations

CPU Features

USB Features

[Yes]

Event Logging

The BIOS configures

only boot devices.

F1 Help

ESC Exit

Select Item

Select Menu

-/Space Change Values

Enter Select Sub-Menu

F9 Setup Defaults

F10 Save and Exit

Figure 4. Advanced Menu

Download from Www.Somanuals.com. All Manuals Search And Download.

L i f e B o o k

S e r i e s B I O S

Table 4: Fields, Options and Defaults for the Advanced Menu

Menu Field

Options

Default

Description

Plug & Play O/S:

• No

• Yes

[No]

Select Yes if you are using a Plug & Play capable operating system.

Select No if you need the BIOS to configure non-boot devices.

Keyboard/Mouse

Features

–—

When selected, opens the Keyboard/Mouse Features submenu,

which allows setting NumLock and Internal Pointing Device

parameters.

Video Features

–—

When selected, opens the Video Features submenu, which allows

setting of the display parameters, including routing of video signals

to different displays.

Internal Device

Configurations

–—

When selected, opens the Internal Device Configurations submenu,

which allows enabling or disabling the IDE and LAN Controllers.

PCI Configurations

CPU Features

When selected, allows you to open the IRQ Reservation window to

designate specific IRQs for use by legacy ISA devices.

When selected, opens the CPU Features submenu, which allows

enabling or disabling of Processor Serial Number feature.

USB Features

When selected, opens the USB Features submenu, which allows

enabling or disabling USB.

Event Logging

When selected, opens the event logging submenu which lets you

view and enable the event log.

Download from Www.Somanuals.com. All Manuals Search And Download.

A d v a n c e d M e n u

Keyboard/Mouse Features Submenu of the Advanced Menu

The Keyboard/Mouse Features submenu is for setting the

parameters of the integrated and external mouse

and keyboard.

PhoenixBIOS Setup Utility

Main

Advanced

Security

Power Savings

Exit

Keyboard/Mouse Features

Item Specific Help

Select power-on state

for Numlock.

Numlock:

Internal Pointing Device:

[Auto]

[Manual Setting]

F1 Help

ESC Exit

Select Item

Select Menu

-/Space Change Values

Enter Select

F9 Setup Defaults

F10 Save and Exit

Sub-Menu

Figure 5. Keyboard/Mouse Features Submenu

Table 5: Fields, Options and Defaults for the Keyboard/Mouse Features Submenu of the Advanced Menu

Menu Field

Options

Default

Description

Numlock:

• Auto

• On

[Auto]

Sets the NumLock function state when the computer

completes booting.

• Off

Internal Pointing

Device:

• Manual Setting

• Always Enabled

• Always Disabled

[Manual Setting]

Configures the internal pointing device. When Manual Setting is

selected, the internal pointing device can be enabled or disabled by

using the [Fn] + [F4] keys. When Always Enabled is selected, the

internal device is always selected. When Always Disabled is

selected, the internal pointing device cannot be used.

Download from Www.Somanuals.com. All Manuals Search And Download.

L i f e B o o k

S e r i e s B I O S

Video Features Submenu of the Advanced Menu

The Video Features Submenu is for setting the

display parameters.

PhoenixBIOS Setup Utility

Security Power Savings Exit

Main

Advanced

Video Features

[Internal Flat Panel]

Item Specific Help

Display

Compensation: [Enabled]

Select display terminal.

F1 Help

ESC Exit

Select Item

Select Menu

-/Space Change Values

Enter Select

F9 Setup Defaults

F10 Save and Exit

Sub-Menu

Figure 6. Video Features Submenu

Table 6: Fields, Options and Defaults for the Video Features Submenu of the Advanced Menu

Menu Field

Options

Default

Description

Display:

• Internal

Flat-Panel

[Internal

Flat-Panel]

Selects where the video signal will be routed.

• External

• Simultaneous

Compensation:

• Disabled

• Enabled

[Enabled]

Enables or disables compensation which controls spacing on the

display. When enabled, displays with less than pixel resolution

800 x 600 will still cover the entire screen.

Download from Www.Somanuals.com. All Manuals Search And Download.

A d v a n c e d M e n u

Internal Device Configurations Submenu of the Advanced Menu

The Internal Device Configurations submenu allows the

user to configure other internal devices.

PhoenixBIOS Setup Utility

Main

Advanced

Security

Power Savings

Exit

Internal Device Configurations

Item Specific Help

IDE Controller:

LAN Controller:

[Both]

[Auto]

[Disabled]

No IDE ports

are enabled.

[Primary]

Only primary IDE

port is enabled.

[Both]

Both primary and

secondary ports are

enabled.

F1 Help

ESC Exit

Select Item

Select Menu

-/Space Change Values

Enter Select Sub-Menu

F9 Setup Defaults

F10 Save and Exit

Figure 7. Internal Device Configurations Submenu

Table 7: Fields, Options and Defaults for the Internal Device

Configurations Submenu of the Advanced Menu

Menu Field

Options

Default

Description

IDE Controller:

• Disabled

• Primary

• Both

[Both]

Enables or disables selected IDE devices.

Enables or disables LAN controller.

LAN Controller:

• Disabled

• Enabled

• Auto

[Auto]

Download from Www.Somanuals.com. All Manuals Search And Download.

L i f e B o o k

S e r i e s B I O S

PCI Configurations Submenu of the Advanced Menu

The PCI Configurations submenu allows the user to

reserve specific interrupts (IRQs) for legacy ISA devices,

and to enable or disable built in PCI device modules.

PhoenixBIOS Setup Utility

Main

Advanced

PCI Configurations

IRQ Reservation

Security

Power Savings

Exit

Item Specific Help

Reserve specific IRQs

for use by legacy ISA

devices.

F1 Help

ESC Exit

Select Item

Select Menu

-/Space Change Values

F9 Setup Defaults

F10 Save and Exit

Enter Select

Sub-Menu

Figure 8. PCI Configurations Submenu

Table 8: Fields, Options and Defaults for the PCI Configurations Submenu of the Advanced Menu

Menu Field

Options

Default

Description

IRQ Reservation

–—

Reserve specific IRQs for use by legacy ISA devices.

Download from Www.Somanuals.com. All Manuals Search And Download.

A d v a n c e d M e n u

IRQ Reservation Submenu of the PCI Configurations Submenu

The IRQ Reservation submenu of the PCI Configura-

tions submenu allows the user to mark various IRQs as

reserved for use by legacy ISA devices. When an IRQ is

reserved, the BIOS does not use it for embedded PCI or

ISA devices.

PhoenixBIOS Setup Utility

Main

Advanced

Security

Power Savings

Exit

IRQ Reservation

Item Specific Help

IRQ 3:

IRQ 4:

IRQ 5:

IRQ 7:

IRQ 9:

IRQ 10:

IRQ 11:

[Available]

Reserve the specified

IRQ for use by legacy

ISA devices.

F1 Help

ESC Exit

Select Item

Select Menu

-/Space Change Values

F9 Setup Defaults

F10 Save and Exit

Enter Select

Sub-Menu

Figure 9. IRQ Reservation Submenu

Table 9: Fields, Options and Defaults for the IRQ Reservation Submenu of the PCI Configurations Submenu

Menu Field

Options

Default

Description

IRQ 3:

• Available

• Reserved

[Available]

Reserves IRQ 3. If Reserved is selected, BIOS reserves IRQ 3 for use by

legacy ISA devices and does not use it for embedded PCI/ISA devices.

IRQ 3 is removed from the IRQ bitmap in the PCI IRQ routing table.

IRQ 4:

IRQ 5:

IRQ 7:

IRQ 9:

IRQ 10:

IRQ 11:

• Available

• Reserved

[Available]

Reserves IRQ 4.

Reserves IRQ 5.

Reserves IRQ 7.

Reserves IRQ 9.

Reserves IRQ 10.

Reserves IRQ 11.

• Available

• Reserved

• Available

• Reserved

• Available

• Reserved

• Available

• Reserved

• Available

• Reserved

Download from Www.Somanuals.com. All Manuals Search And Download.

L i f e B o o k

S e r i e s B I O S

CPU Features Submenu of the Advanced Menu

The CPU Features submenu configures certain features

of the CPU in the system.

PhoenixBIOS Setup Utility

Main

Advanced

Security

Power Savings

Exit

CPU Features

Item Specific Help

Processor Serial Number:

[Disabled]

Configures Processor

Serial Number feature.

[Disabled]

Processor Serial Number

feature is disabled.

[Enabled]

Processor Serial Number

feature is enabled.

F1 Help

ESC Exit

Select Item

Select Menu

-/Space Change Values

F9 Setup Defaults

F10 Save and Exit

Enter Select

Sub-Menu

Figure 10. CPU Features Submenu

Table 10: Fields, Options and Defaults for the CPU Features Submenu of the Advanced Menu

Menu Field

Options

Default

Description

Processor Serial

Number:

• Enabled

• Disabled

[Disabled]

Enables or disables the Processor Serial Number feature of the

processor.

Download from Www.Somanuals.com. All Manuals Search And Download.

A d v a n c e d M e n u

USB Features Submenu of the Advanced Menu

The USB Features submenu configures the USB capabili-

ties of the system.

PhoenixBIOS Setup Utility

Main

Advanced

Security

Power Savings

Exit

USB Features

Item Specific Help

USB Floppy Disk:

[Enabled]

[Disabled]

Legacy Floppy Emulation

is disabled.

[Enabled]

Legacy Floppy Emulation

is enabled and USB

floppy is available

without USB aware OS.

F1 Help

ESC Exit

Select Item

Select Menu

-/Space Change Values

Enter Select

F9 Setup Defaults

F10 Save and Exit

Sub-Menu

Figure 11. USB Features Submenu

Table 11: Fields, Options and Defaults for the USB Features Submenu of the Advanced Menu

Menu Field

Options

Default

Description

USB Features:

• Disabled

• Enabled

[Enabled]

When enabled, Legacy Floppy Emulation is enabled and USB floppy

is available without USB-aware OS.

Download from Www.Somanuals.com. All Manuals Search And Download.

L i f e B o o k

S e r i e s B I O S

Event Logging Submenu of the Advanced Menu

The Event Logging submenu is for setting up the logs for

DMI event logging.

PhoenixBIOS Setup Utility

Security Power Savings Exit

Main

Advanced

Event Logging

Item Specific Help

Event Log Capacity:

Event Log Validity:

Space Available

Valid

Press <Enter> key to

view the contents of

the event log.

View Event Log:

[Enter]

Event Logging:

[Enabled]

[Disabled]

System Boot Event:

Clear All Event Logs:

Mark Events as Read:

[No]

[Enter]

F1 Help

ESC Exit

Select Item

Select Menu

-/Space Change Values

Enter Select

F9 Setup Defaults

F10 Save and Exit

Sub-Menu

Figure 12. Event Logging Submenu

Table 12: Fields, Options and Defaults for the Event Logging Submenu of the Advanced Menu

Menu Field

Options

Default

Space Available

Valid

Description

Event Log Capacity:

Event Log Validity:

View Event Log:

Event Logging:

Display only

• Enter

[Enter]

Allows you to view content of event log.

Turns event logging on and off for all DMI events.

• Disabled

• Enabled

[Enabled]

System Boot

Event:

• Disabled

• Enabled

[Disabled]

[No]

Turns event logging on and off for DMI system boot events.

When set to [Yes] all event logs will be cleared at next boot.

Allows you to make all events currently in the event log as read.

Clear All Event Logs:

Mark Events as Read:

• No

• Yes

• Enter

[Enter]

Download from Www.Somanuals.com. All Manuals Search And Download.

S e c u r i t y M e n u

SECURITY MENU – SETTING THE SECURITY FEATURES

The Security menu allows you to set up the data security

features of your notebook to fit your operating needs and

to view the current data security configuration. Follow

the instructions for Navigating Through the Setup Utility

to make any changes.

P O I N T S

• If you make an error when re-entering the password

a [Warning] will be displayed on the screen. To try

again, press the Enter key and then retype the pass-

word. Press the Esc key to abort the password setting

process.

• Entering a password incorrectly three times in a row

will cause the keyboard and mouse to be locked out

and the warning [System Disabled] to be displayed. If

this happens, restart the computer by turning off and

on the power with the power switch and use the

correct password on reboot.

The following tables show the names of the menu fields

for the Security menu and its submenus, all of the

options for each field, the default settings and a

description of the field’s function and any special

information needed to help understand the field’s use.

The default condition is no passwords required and no

write protection.

• If the Password on Resume is Enabled and the Pass-

word on Boot is Disabled you will not have to type

your password upon resuming the system from the

Suspend or Save-to-Disk modes. Power Management

Security will work only if Password on Boot is

enabled.

P O I N T

If you set a password, write it down and keep it in a

safe place. If you forget the password you will have to

contact your support representative to regain access to

your secured functions and data.

PhoenixBIOS Setup Utility

Main

Advanced

Security

Power

Boot

Info

Exit

Item Specific Help

Supervisor Password Is:

User Password Is:

Clear

Press <Enter> key to

set Supervisor password

to enable any password

features.

Set Supervisor Password

Set User Password

Minimum User Password Length

[Enter]

[0]

Then password entry is

required to enter BIOS

Setup.

Password on Boot:

[Disabled]

[All]

Password on Resume:

Boot from Removable Media:

Floppy Disk Access:

Hard Disk Security

Owner Information

[All]

Hard Disk Boot Sector:

[Normal]

F1 Help

ESC Exit

Select Item

Select Menu

-/Space Change Values

Enter Select Sub-Menu

F9 Setup Defaults

F10 Save and Exit

Figure 13. Security Menu

Download from Www.Somanuals.com. All Manuals Search And Download.

L i f e B o o k

S e r i e s B I O S

Table 13: Fields, Options and Defaults for the Security Menu

Menu Field

Options

Default

Description

Supervisor

Password is:

–—

Clear

A display-only field. Set is displayed when the system supervisor

password is set and Clear when it is not.

User Password is:

–—

Clear

A display-only field. Set is displayed when the general user

password is set, and Clear when it is not.

Set Supervisor Password

[Enter]

Sets, changes or cancels the Supervisor Password. The Supervisor

Password may be up to seven characters long and must include

only letters or numbers (no symbols). Passwords are NOT

case- sensitive. To cancel a password press the Enter key instead of

entering characters in the Enter New Password field and in the

Re-enter New Password field. When a Supervisor Password is set

it must be used to access the BIOS setup utility.

Set User Password

–—

[Enter]

Can only be accessed if Supervisor Password is set. Sets, changes or

cancels the User Password. The User Password may be up to seven

characters long and must include only letters or numbers (no sym-

bols). Passwords are NOT case-sensitive. To cancel a password

press the Enter key instead of entering characters in the Enter New

Password field and in the Re-enter New Password field. When a

User Password is set it must be used to access the BIOS setup utility.

Minimum User

[0]

–—

Password Length:

Password on Boot:

• Disabled

• First Boot

• Every Boot

[Disabled]

When set to Disabled, no password is required. When set to First

Boot, password entry required only before first boot. When Every

Boot is selected, password required whenever the system is booted.

Password On Resume:

• Disabled

• Enabled

[Disabled]

[All]

When Enabled, PS/2 keyboard and mouse inputs are locked out

upon Resume From Suspend or Save-to-Disk until entering pass-

word.

Boot from Removable

Media:

• All

• Supervisor only

When Supervisor Only is selected, only the Supervisor can boot

from removeable media. Only the user who enters the Supervisor

Password before OS boot is treated as the Supervisor.

When All is selected, boot from removeable media is not restricted.

Floppy Disk Access:

• All

• Supervisor only

[All]

When Supervisor Only is selected, only the Supervisor can access

the floppy disk. Only the user who enters the Supervisor Password

before OS boot is treated as the Supervisor.

When All is selected, floppy disk access is not restricted.

Configures hard disk security features.

Sets Owner information.

Hard Disk Security:

Owner Information:

Hard Disk Boot Sector:

–—

• Normal

[Normal]

Sets protection mode for hard disk drive.

• Write Protected

utility, press the [Esc] key to go to the Exit Menu. If you

wish to move to another menu, use the cursor keys.

Exiting from the Security Menu

When you have finished setting the parameters on the

Security Menu, you can either exit from setup utility or

₂m₀ove to another menu. If you wish to exit from setup

Download from Www.Somanuals.com. All Manuals Search And Download.

S e c u r i t y M e n u

Hard Disk Security Submenu of the Security Menu

The Hard Disk Security submenu is for configuring hard

disk security features.

PhoenixBIOS Setup Utility

Security Power Savings Exit

Main

Advanced

Hard Disk Security

Item Specific Help

Primary Master:

Secondary Master:

[Disabled]

The feature is disabled.

[Enabled]

The hard disk is locked

with the pasword. Data

in the locked disk

cannot be read on any

systems other than the

original system on which

it was locked, or on

systems that have the

identical password

setting.

F1 Help

ESC Exit

Select Item

Select Menu

-/Space Change Values

Enter Select Sub-Menu

F9 Setup Defaults

F10 Save and Exit

Figure 14. Hard Disk Security Submenu

Table 14: Fields, Options and Defaults for the Hard Disk Security Submenu of the Security Menu

Menu Field

Options

Default

Description

Primary Master:

• Disabled

• Enabled

[Disabled]

Disabled: No password protection.

Enabled: Hard drive is locked with the password. Data in the locked

disk cannot be read on any systems other than the original system

on which it was locked, or on systems that have the identical pass-

word setting.

Secondary Master:

• Disabled

• Enabled

[Disabled]

Disabled: No password protection.

Enabled: Secondary Master device is locked with the password.

Data in the device cannot be read on any systems other than the

original system on which it was locked, or on systems that have the

identical password setting.

Download from Www.Somanuals.com. All Manuals Search And Download.

L i f e B o o k

S e r i e s B I O S

Owner Information Submenu of the Security Menu

The Owner Information submenu is for setting owner information.

PhoenixBIOS Setup Utility

Main

Advanced

Security

Power

Boot

Info

Exit

Item Specific Help

Owner Information Is:

Set Owner Information

Clear

[Enter]

Foreground Color:

Background Color:

[Gray]

[Black]

F1 Help

ESC Exit

Select Item

Select Menu

-/Space Change Values

Enter Select Sub-Menu

F9 Setup Defaults

F10 Save and Exit

Figure 15. Owner Information Submenu

Table 15: Fields, Options and Defaults for the Owner Information Submenu of the Security Menu

Menu Field

Options

–—

Default

Clear

Description

Owner Information Is:

Display only.

Set Owner

Information:

–—

[Enter]

Field to write owner

information, i.e. name.

Foreground Color:

Background Color:

• Black

• Blue

• Green

• Cyan

• Red

• Brown

• White

• Gray

• Light Blue

• Light Green

• Light Cyan

• Light Red

• Light Magenta

• Light Yellow

• Bright White

[Gray]

• Magenta

• Black

• Blue

• Brown

• White

• Light Cyan

• Light Red

[Black]

• Green

• Cyan

• Red

• Gray

• Light Blue

• Light Green

• Light Magenta

• Light Yellow

• Bright White

• Magenta

Download from Www.Somanuals.com. All Manuals Search And Download.

P o w e r M e n u

POWER MENU – SETTING POWER MANAGEMENT FEATURES

The Power menu allows you to set and change the power

management parameters. Follow the instructions for

Navigating Through the Setup Utility to make any

changes.

The following tables show the names of the menu fields

for the Power menu and its submenus, all of the options

for each field, the default settings and a description of

the field’s function and any special information needed

to help understand the field’s use.

PhoenixBIOS Setup Utility

Security Power Boot

Main

Advanced

Info

Exit

Item Specific Help

Power Savings:

[Customized]

[Off]

[4 Minutes]

[15 Minutes]

Hard Disk Timeout:

Display Timeout:

Standby Timeout:

Auto Suspend Timeout:

Select Power Management

Mode. Choosing modes

changes system power

management settings.

Maximum Power Savings

conserves the greatest

amount of system power

while Maximum

Suspend Mode:

Auto Save To Disk:

[Suspend]

[Off]

Resume On Modem Ring:

Resume On Time:

Resume Time:

[Off]

[00:00:00]

Performance conserves

power but allows

greatest system

performance. To alter

these setting, choose

Customize. To turn off

power management,

Advanced Features

choose Disabled.

F1 Help

ESC Exit

Select Item

Select Menu

-/Space Change Values

Enter Select Sub-Menu

F9 Setup Defaults

F10 Save and Exit

Figure 16. Power Menu

Table 16: Fields, Options and Defaults for the Power Menu

Menu field

Options

Default

Description

Power Savings:

• Disabled

• Customized

• Maximum

Power Savings

[Customized]

Sets the power savings parameters to a factory installed

combination of parameters, a custom set of parameters set

by you or no power saving features.

• Maximum

Performance

Hard Disk

Timeout:

• Off

• 30 seconds to

20 Minutes

[Off]

Sets the length of time that the hard drive can be inactive before your note-

book automatically turns off the power to the hard drive controller and drive

motor. If you choose a factory installed combination of parameters this field

will display the setting. If you choose to customize the parameters you will

be able to set this yourself. The options available vary from Off, which has

no inactivity shutoff, to 20 minutes.

Display

Timeout:

• Off

• 2 to 20 Minutes

Sets the length of time without any user input device activity before the

display is turned off. If you choose a factory combination of parameters, this

field will display the setting. If you choose to customize the parameters, you

will be able to set this yourself. Off has no inactivity shutoff.

Download from Www.Somanuals.com. All Manuals Search And Download.

L i f e B o o k

S e r i e s B I O S

Table 16: Fields, Options and Defaults for the Power Menu

Menu field

Options

Default

Description

Standby

Timeout:

• Off

• 1 to 16 Minutes

[4 Minutes]

Sets the length of time without any user input device activity before the CPU

is set to half speed and the display and the hard drive are turned off. If you

choose a factory combination of parameters this field will display the setting.

If you choose to customize the parameters you will be able to set it yourself.

Auto Suspend

Timeout:

• Off

• 5 to 60 minutes

[15 Minutes]

[Suspend]

Sets the length of time without any I/O activity before your note-book goes

into Suspend mode. If you choose a factory combination of parameters this

field will display that setting. If you choose to customize the parameters you

will be able to set this yourself. Off has no inactivity suspension.

Suspend

Mode:

• Suspend

• Save to Disk

Sets the form of suspension state. If you choose Suspend, you will suspend

operation with power to system memory, and everything else powered

down or in a very low power state. If you choose Save-to-Disk your note-

book will save all of system memory and the operating parameters to the

hard drive before turning your notebook to the pseudo-off condition.

Auto Save

to Disk:

• Off

• After 1 Hour

[Off]

When set to “After 1 Hour”, your notebook will automatically save all

system memory and the operating parameters to the hard drive and go to

pseudo-off if the notebook is left in Suspend mode for more than an hour.

Resume On

Modem Ring:

• Off

• On

Sets whether or not to Resume from a suspension state when a message is

received by telephone line. This feature will not operate if the Save-to-Disk

mode is enabled. This feature applies to internal and external modems.

Resume On

Time:

• Off

• On

[Off]

Sets whether or not to resume from a suspension state at a designated time.

This feature is available from either the Suspend or Save-to-Disk modes.

Resume Time:

–—

[00:00:00]

Sets the designated time, on a 24-hour clock, when the notebook is to auto-

matically resume operation from the Suspend state. The format of the clock

setting is hours:minutes:seconds. Each segment of the time is set separately,

either by incrementing or by typing in the numbers. You move between the

segments with the [Tab] key or the [Shift]+[Tab] keys. This only applies

when Resume on Time is set to On.

Advanced

Features:

–—

When selected, opens the Advanced Features submenu which allows

setting additional power saving parameters.

Factory Installed Values for Power Saving Profiles

Hard Disk

Timeout

Video

Timeout

Standby

Timeout

Auto Suspend

Timeout

Customized:

Off

4 Minutes

1 Minute

Off

15 Minutes

5 Minutes

15 Minutes

Off

Maximum Power Savings:

Maximum Performance:

Disabled:

30 Seconds

Off

2 Minutes

Off

Sample Customized Profile: (To get even better battery

life keep the display and volume settings as low as pos-

sible and use the sample customized profile.)

2 Minutes

1 Minute

5 Minutes

Download from Www.Somanuals.com. All Manuals Search And Download.

P o w e r M e n u

Advanced Features Submenu of the Power Menu

The Advanced Features submenu is for setting some non-time related power saving parameters.

PhoenixBIOS Setup Utility

Power

Advanced Features

Item Specific Help

Suspend/Resume Switch:

[Enabled]

Configures the

Lid Closure Suspend:

Lid Open Resume:

Resume on LAN:

[On]

[Off]

Suspend/Resume switch.

F1 Help

ESC Exit

Select Item

Select Menu

-/Space Change Values

Enter Select Sub-Menu

F9 Setup Defaults

F10 Save and Exit

Figure 17. Advanced Features Submenu

Table 17: Fields, Options and Defaults for the Advanced Features Submenu of the Power Menu

Menu Field

Options

Default

Description

Suspend/Resume

Switch:

• Disabled

• Enabled

[Enabled]

Sets the function of the Suspend/Resume button when your note-

book is in an active state. The resume function can not be disabled

as it works regardless of any other settings.+

Lid Closure

Suspend:

• Off

• On

[On]

[Off]

Enables and disables having closure of the Display panel put your

notebook in Suspend mode.

Lid Open Resume:

Resume On LAN:

• Off

• On

Enables and disables having opening the Display panel acting as an

automatic resume.

• Off

• On

When this feature is set to On, the system will wake when the inter-

nal LAN device receives a Magic Packet while in Suspend Mode.

the setup utility press the [Esc] key to go to the Exit

menu. If you wish to move to another menu, use the

cursor keys.

Exiting from Power Menu

When you have finished setting the boot parameters with

the Power menu, you can either exit from the setup

utility or move to another menu. If you wish to exit from

Download from Www.Somanuals.com. All Manuals Search And Download.

L i f e B o o k

S e r i e s B I O S

BOOT MENU – SELECTING THE OPERATING SYSTEM SOURCE

The Boot Menu is used to select the order in which the

BIOS searches sources for the operating system. Follow

the instructions for Navigating Through the Setup Utility

to make any changes.

The following tables show the names of the menu fields

for the Boot menu and its submenu, all of the options

for each field, the default settings and a description of

the field’s function and any special information needed

to help understand the field’s use.

PhoenixBIOS Setup Utility

Main

Advanced

Security

Power Savings

Boot

Item Specific Help

Quick Boot:

[Enabled]

Boot Time Diagnostic Screen:

[Disabled]

All diagnostic tests

will be done.

Preboot Execution Environment

Boot Device Priority

[Disabled]

[Enabled]

Some diagnostic tests

may be skipped while

booting to speed up.

[Auto]

Diagnostic tests will

be automatically

skipped or done

according to the order

of the ACPI OS.

F1 Help

ESC Exit

Select Item -/Space Change Values

Select Menu

Enter Select Sub-Menu

F9 Setup Defaults

F10 Save and Exit

Figure 18. Boot Menu

Table 18: Fields, Options and Defaults for the Boot Menu

Menu Field

Options

Default

Description

QuickBoot Mode:

• Disabled

• Enabled

• Auto

[Enabled]

Turns on and off booting with a truncated set of Power On Self

Test. (Fewer tests mean faster turn on.)

Boot-time

Diagnostic Screen:

• Disabled

• Enabled

[Disabled]

—

Turns on and off display of test results instead of Fujitsu logo screen

during Power On Self Test.

Preboot Execution

Environment

• Disabled

• Enabled

Turns off and on the preboot execution environment feature.

This menu allows setting up the source for the operating system.

Boot Device

Priority

• Selects the Boot

Device Priority

submenu

Download from Www.Somanuals.com. All Manuals Search And Download.

B o o t M e n u

Boot Device Priority Submenu of the Boot Menu

The Boot Device Priority submenu is for setting the

order of checking of sources for the operating system.

PhoenixBIOS Setup Utility

Main

Advanced

Security

Power Savings

Boot

Boot Device Priority

Item Specific Help

The top device has the

highest priority.

Floppy Disk Drive

+Hard Disk Drive

ATAPI CD-ROM Drive

<Enter> expands or

collapses devices with

a + or -.

<Ctrl+Enter> expands

all.

< > or < > selects a

device.

<+>/<Space> or <->

moves the device up or

down.

<Shift + 1> enables or

disables a device.

F1 Help

ESC Exit

Select Item

Select Menu

-/Space Change Values

F9 Setup Defaults

F10 Save and Exit

Enter Select

Sub-Menu

Figure 19. Boot Device Priority Submenu

Table 19: Fields, Options and Defaults for the Boot Device Priority Submenu of the Boot Menu

Menu Field

Options

Description

Floppy Disk Drive

–—

The boot selections determine the order in which the BIOS searches for

the operating system during a startup sequence. To change the order

highlight one source by using the [up] or [down] cursor keys and then

press the [+] or [-] key to change the order number for that source. Be

sure to save your changed order when you exit the BIOS setup utility.

Hard Disk Drive

• TOSHIBA MHK2018GAP-(PM)

• Bootable Add-in Cards

–—

ATAPI CD-ROM

Drive

–—

Exiting from Boot Menu

When you have finished setting the boot parameters with

the Boot menu, you can either exit from the setup utility

or move to another menu. If you wish to exit from the

setup utility press the [Esc] key to go to the Exit menu. If

you wish to move to another menu, use the cursor keys.

Download from Www.Somanuals.com. All Manuals Search And Download.

L i f e B o o k

S e r i e s B I O S

INFO MENU - DISPLAYS BASIC SYSTEM INFORMATION

The Info menu is a display-only screen that provides the

configuration information for your notebook.

P O I N T S

• The asset number is an optional user-entered field

The following table shows the names of the menu fields

for the Info menu and the information displayed in those

fields. These fields are for information purposes only, and

are not editable (except for the Asset Number as in the

Point below).

and can be entered through the use of third party

DMI Compliant software, such as LANdesk Client

Manager.

• The information displayed on this screen is variable

according to the unit you purchased.

PhoenixBIOS Setup Utility

Security Power Savings

Main

Advanced

Boot

Info

Item Specific Help

BIOS Version:

BIOS Date:

BIOS Area:

1.04

10/31/2001

E400h - FFFFh

CPU Type:

CPU Speed:

L1 Cache:

L2 Cache:

Transmeta TM5800 processor

800 MHz

128 KB

512 KB

Total Memory:

112 MB

CMS Mode:

CMS Revision:

OEM ID:

Normal

4.2.6-8-168

FJCFG-0104000103

F1 Help

ESC Exit

Select Item

Select Menu

-/Space Change Values

Enter Select Sub-Menu

F9 Setup Defaults

F10 Save and Exit

Figure 20. Info Menu

Download from Www.Somanuals.com. All Manuals Search And Download.

I n f o M e n u

Table 20: Fields, Options and Defaults for the Info Menu

Menu Field

BIOS Version:

BIOS Date:

Default

Menu Field

L2 Cache:

Default

512 KB

1.xx

10/31/2001

Total Memory:

CMS Mode:

112 MB

BIOS Area:

E400h – FFFFh

Normal

CPU Type:

Transmeta TM5800

processor

CMS Revision:

4.2.6-8-168

CPU Speed:

L1 Cache:

800 MHz

128 KB

OEM ID:

FJCFG-0104000103

Download from Www.Somanuals.com. All Manuals Search And Download.

L i f e B o o k

S e r i e s B I O S

EXIT MENU – LEAVING THE SETUP UTILITY

The Exit Menu is used to leave the setup utility. Follow

the instructions for Navigating Through The Setup

Utility to make any changes.

PhoenixBIOS Setup Utility

Main

Advanced

Security

Power Savings

Boot

Exit

Item Specific Help

Exit Saving Changes

Exit Discarding Changes

Load Setup Defaults

Discard Changes

Exit System Setup and

save your changes to

CMOS.

Save Changes

F1 Help

ESC Exit

Select Item

Select Menu

-/Space Change Values

F9 Setup Defaults

F10 Save and Exit

Enter Select

Sub-Menu

Figure 21. Exit Menu

The following table shows the names of the menu fields

for the Exit menu, the default settings and a description

of the field’s function and any special information

needed to help understand the field’s use.

Table 21: Fields, Options and Defaults for the Exit Menu

Optional Keyboard

Menu Field

Default

Description

Shortcut

Exit Saving

Changes

Press the F10key

–—

Exit Saving Changes and Exit will store all the entries on every

menu of the setup utility to the BIOS memory and then exit the

setup utility. A confirmation message Save Configuration

changes and exit now? [Yes] [No] will be displayed.

Exit Discarding

Changes

–—

Selecting Exit Discarding Changes and Exit will exit the setup

utility with out writing to the BIOS memory. When the BIOS

recognizes this selection it will load the operating system and

begin operation.

Download from Www.Somanuals.com. All Manuals Search And Download.

E x i t M e n u

Table 21: Fields, Options and Defaults for the Exit Menu

Optional Keyboard

Menu Field

Default

Description

Shortcut

Load Setup

Defaults

Press the F9key

–—

Selecting Load Setup Defaults will load the factory preset default

values for all menu fields, then display the message Load

default configuration now? [Yes] [No]. When con-

firmed the setup utility will return to the Exit Menu. T o return to

another menu follow the directions in the Navigating Through The

Setup Utility section.

Discard Changes

Save Changes

–—

Selecting Discard Changes will load the previous values in BIOS

memory for all menu fields. The message Load previous now?

[Yes] [No] will be displayed. When confirmed the setup utility

will return to the Exit menu. T o return to another menu, follow the

directions in the Navigating Through The Setup Utility section.

Selecting Save Changes will cause the new settings in all menus to

be written to the BIOS memory. The message Save configura-

tion changes now? [Yes] [No] will be displayed. When

confirmed, the setup utility will return to the Exit menu. To return to

another menu, follow the directions in the Navigating Through The

Setup Utility section.

Download from Www.Somanuals.com. All Manuals Search And Download.

Edelbrock Automobile Parts R09430 User Manual
EverFocus Camera Accessories EDH5102 User Manual
Fagor America Electric Pressure Cooker M16301457 10 03 User Manual
Fagor America Electric Pressure Cooker Rapida User Manual
Fellowes Air Cleaner AP 230H User Manual
Fisher Price Video Games P8897 User Manual
Fitness Quest Home Gym 80e User Manual
GE Computer Hardware GFK 0726B User Manual
GE Oven ZET1SM User Manual
Gianni Industries Switch GH 803 110J BG User Manual