Fujitsu Flat Panel Television PDS4213W H User Manual

USER’S MANUAL  
42” WIDE PLASMA DISPLAY  
PDS4213W-H/PDS4214W-S  
Contents  
Page  
Page  
Before Use  
Adjustments  
• Safety Precautions ····································· E-2–E-3  
• Features ···························································· E-4  
• Accessories ······················································ E-5  
• Handy Tips ························································ E-6  
• Installation························································· E-7  
• Safety Measures ··············································· E-8  
• Adjusting Images (PICTURE Menu) ······· E-26–E-27  
• Adjusting Screen Position and Size  
(POSITION/SIZE Menu)·························· E-28–E-29  
• Adjusting Sound (SOUND Menu)··········· E-30–E-31  
• Other Adjustments (OTHERS Menu)······ E-32–E-34  
• Extended Features (Extended menu)····· E-35–E-39  
Usage  
Others  
• Part Names and Functions ······················ E-9–E-12  
• Using the Remote Control ······························ E-13  
• Connecting the Display to External  
Equipment·············································· E-14–E-15  
• Basic Operations ············································ E-16  
• Selecting Input Mode······································ E-17  
• Watching Images on the Wide Screen··· E-18–E-19  
• How to Use Menus ································ E-20–E-25  
• Options ··························································· E-40  
• Factory Settings·············································· E-41  
• Specification ·········································· E-42–E-43  
• Cleaning and Maintenance ····························· E-44  
Before using the display, read this manual carefully so that you know how to use the display correctly.  
Refer to this manual whenever questions or problems about operation arise. Be sure to read and observe the safety  
precautions.  
Keep this manual where the user can see it easily.  
* Installation and removal require special expertise. Consult your product dealer for details.  
DECLARATION OF CONFORMITY  
according to EN45014  
We  
Fujitsu General (Euro) GmbH  
of  
Werftstraße 20, D-40549 Düsseldorf, F. R. Germany  
Manufacturer: Shinjyo Fujitsu General Limited  
702-3 Kanezawa Shinjyo-shi  
Yamagata Japan  
declares under our sole responsibility that the product,  
Type: 42” PLASMA DISPLAY  
Model Name: PDS4214W-S  
to which this declaration relates are in conformity with the following standards;  
European Standards:  
EMC: a. EN55022 1994/A1:1995/A2:1997/A3: 1998 Class B  
b. EN61000-3-2 1995  
c. EN61000-3-3 1995  
d. EN55024 1998  
(EN61000-4-2 1995 / EN 61000-4-3 1996)  
(EN61000-4-4 1995 / EN 61000-4-5 1995 / EN61000-4-6 1996)  
(EN61000-4-8 1993 / EN 61000-4-11 1994)  
Safety: e. EN60950 1992/A1:1993/A2:1993/A3:1995/A4:1997  
By conformance with the standard referenced, the product follows  
the provisions of the directives listed below.  
a. EC Council Directive 89/336/EEC of 3rd, May 1989  
b. EC Council Directive 92/31/EEC of 28th, April 1992  
c. EC Council Directive 93/68/EEC of 22nd, July 1993  
d. EC Council Directive 73/23/EEC of 19th, February 1973  
Place of Issue: Germany  
Date of Issue: Jun. 2000  
Signature:  
H. Hirosaki, Managing Director  
Fujitsu General (Euro) GmbH  
Declaration reference:  
Werftstraße 20, D-40549 Düsseldorf, F. R. Germany  
Tel: 0211-50098-0 Fax: 0211-50098-50  
Fujitsu General (Euro) GmbH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SAFETY PRECAUTIONS  
FCC NOTICE  
• PDS4213W-H: A Class A digital device  
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These  
limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial  
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the  
instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to  
cause harmful interference in which case the user will be required to correct the interference at his own expense.  
• PDS4214W-S: A Class B digital device  
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These  
limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses  
and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to  
radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does  
cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is  
encouraged to try to correct the interference by one or more of the following measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  
Consult the dealer or an experienced radio/TV technician for help.  
IMPORTANT INFORMATION  
WARNING: This is Class A and Class B product. In a domestic environment this product may cause radio  
interference in which case the user may be required to take adequate measures.  
WARNING: TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS  
PRODUCT TO RAIN OR MOISTURE.  
IMPORTANT SAFEGUARDS  
Electrical energy can perform many useful functions. This unit has been engineered and manufactured to assure your personal safety. But  
IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARD. In order not to defeat the safeguards  
incorporated into this product, observe the following basic rules for its installation, use and service. Please read these “Important  
Safeguards” carefully before use.  
All the safety and operating instructions should be read before the product is operated.  
The safety and operating instructions should be retained for future reference.  
All warnings on the product and in the operating instructions should be adhered to.  
All operating instructions should be followed.  
Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.  
Do not use attachments not recommended by the product manufacturer as they may cause hazards.  
Do not use this product near water. Do not use immediately after moving from a low temperature to high temperature, as this causes  
condensation, which may result in fire, electric shock, or other hazards.  
Do not place this product on an unstable cart, stand, or table. The product may fall, causing serious injury to a child or adult, and serious  
damage to the product. The product should be mounted according to the manufacturer’s instructions, and should use a mount  
recommended by the manufacturer.  
E-2  
Download from Www.Somanuals.com. All Manuals Search And Download.  
When the product is used on a cart, care should be taken to avoid quick stops, excessive force, and uneven surfaces  
which may cause the product and cart to overturn, damaging equipment or causing possible injury to the operator.  
Slots and openings in the cabinet are provided for ventilation. These ensure reliable operation of the product and  
protect it from overheating. These openings must not be blocked or covered. (The openings should never be blocked by placing the  
product on bed, sofa, rug, or other similar surface. It should not be placed in a built-in installation such as a bookcase or rack unless  
proper ventilation is provided and the manufacturer’s instructions have been adhered to.)  
For proper ventilation, separate the product from other equipment, which may prevent ventilation and keep distance more than 10  
Power cord  
Power supply voltage:  
AC 100125 V  
AC 200240 V  
AC 240 V (SAA TYPE)  
E-3  
FEATURES  
This display has a plasma display panel and is only 8.5 cm deep. With its high image quality and performance, it is perfectly suited to  
multimedia applications.  
Can receive a variety of input signals  
• In addition to video, S-video, and RGB1 (mD-sub Connector), RGB2 (BNC x 5 connector) signals, this display supports input of high-  
quality video signals such as DVD and HDTV.  
• The display is applicable to the following color television systems used worldwide: NTSC, PAL, SECAM, N-PAL, M-PAL, 4.43NTSC.  
• The display has a component video input terminal to receive signals from the DVD player and HDTV equipment as well as digital  
broadcasting signals (color difference signals).  
• The display has an RGB input terminal to receive signals, including wide RGB signals*1, VGA, SVGA, and XGA*2.  
5 screen sizes (video input mode) and 3 screen sizes (RGB input mode)  
• This display offers a total of five different screen sizes in video input mode: Wide1, Wide2, Zoom1, and Zoom2. A Normal mode is  
also available, for display of normal-size (4:3 aspect ratio) images.  
• Three different screen sizes in RGB input mode (Normal, Wide, and Zoom) are also available.  
Install the display lengthwise  
• The display can be installed lengthwise, enabling advertising to be displayed. In this case, you can set up the display so that on-screen  
information, such as input modes and menus, is displayed properly.  
Power management function  
• The display features a DPMS (Display Power Management Signaling) function that ensures automatic power saving capability.  
Flexible enough to be used as part of a system  
You can operate the display by remote control using the RS-232C interface.  
• If you have two or more displays, you can assign a unique number to each of them so that you can select which one you want to use.  
Others  
You can specify the color temperature.  
• Two-line sound input, 1 W + 1 W built-in speaker, and 7 W + 7 W external speaker outputs are available.  
• The white screen and screen saver functions are available to minimize phosphor burn-in.  
*1 With the optionally available graphics board, you can send wide RGB signals (852 x 480) from your PC.  
*2 The refresh rate of 60 Hz for XGA (1024 x 768) and those of 50, 60, 72, and 75 Hz for SVGA (800 x 600) are supported.  
Note that the XGA and SVGA images will be smaller when displayed on the screen.  
E-4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ACCESSORIES  
CHECKING ACCESSORIES  
One strap  
(for remote control)  
One connector  
cover  
One remote  
control  
Two AA batteries  
One users manual  
Three power  
cables  
C
Uignal or power cables. Use them as shown in the figure when mounting the display  
on thnging it from the ceiling using the hanging unit.  
When you run signal cables  
downwards  
When you run signal cables to the right  
Connector cover  
When you finish binding the cables using the cable clampers, you need to attach the  
connector cover to the display.  
To do this, use nippers to cut out a section of the connector cover such that the cables can  
be pulled out through that section. Then attach the cover to the display.  
Projections (to be fit into corresponding  
sections on the display)  
When attaching the connector cover, make sure that the upper and lower projections on  
the cover fit properly into the corresponding sections on the display.  
Information  
Cables for connecting the display to external equipment are not supplied. Contact your dealer for more information on these products.  
E-5  
HANDY TIPS  
• Images may become “burnt” into the screen phosphors if the screen is left on for extended periods. To ensure that the display has a  
prolonged service life, be sure to use a screen saver. This will ensure the same image or pattern is not constantly displayed for long  
periods. (See P. E-38–E-39.)  
• The display’s plasma display panel, which is built for maximum precision, provides more than 99.99% effective pixels. You may find,  
however, that some pixels constantly remain lit or dimmed.  
• The display has a fan to prevent its internal temperature from rising.  
The fan starts if the surrounding temperature or the internal temperature of the display exceeds a certain level. If the display is installed  
improperly or installed in the wrong direction, the resulting internal temperature increase will cause the fan to operate.  
• Be careful with the air delivered by the fan. It may be very hot.  
• Contact your dealer if you find that the display does not seem to function properly when used with other audio-visual equipment.  
You may need to move your display if it produces degraded images or noise due to electromagnetic radiation, or if the infrared remote  
control does not function properly.  
• Images may not be displayed properly if you connect a non-standard PC to the RGB input terminal. In this case, contact your dealer  
for more information.  
• The protective circuit, built into the display, automatically turns off the power if the display has a problem. In this case, you will see  
that the power indicator lamp flashes red.  
Warning  
If the power indicator lamp flashes red, this signifies that the display has developed a problem. When this happens, be sure to remove the  
power plug from the receptacle to prevent fire or electric shock. Then, check the display in accordance with the instructions given on P.  
E-44, or contact your dealer.  
• Viewing the screen constantly for extended periods can strain your eyes. Be sure to stay at a proper distance (at least 1.5 m or 5 feet)  
from the screen and to look occasionally away it while working.  
• Have the display inspected and cleaned by your dealer at regular intervals.  
E-6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATION  
To prevent the display’s internal components from overheating, make sure that the display is installed in a well-ventilated location.  
Be sure to use the (optionally available) stand, wall-mounting unit or the other unit when installing the display. Also, be also sure that  
your dealer performs the actual installation.  
See the appropriate instruction manual for more information on the installation hardware you select.  
To ensure proper heat radiation, provide at least as much space around the display as shown below.  
* Make sure that the display is installed in a location where the temperature can be maintained between 0°C and 40°C.  
* Never attempt to tilt the display sideways or backward.  
* To prevent the power and other cables from being accidentally pulled, make sure that they run along the wall or through corners.  
* The display can be installed with either of its sides facing down.  
When using the stand  
Front  
Side  
(cm)  
(cm)  
Upper  
10  
1.5  
10  
10  
6
Wall  
Right  
Left  
Floor  
Floor  
When using the wall-mounting unit (horizontal type)  
When using the wall-mounting unit (vertical type)  
Front  
Side  
Front  
Side  
Upper  
10  
(cm)  
(cm)  
(cm)  
(cm)  
Wall mounting unit  
Upper  
10  
Wall mounting unit  
10  
10  
10  
10  
Left  
Left  
Right  
Right  
Wall  
Wall  
6
Lower  
1.5  
10  
Lower  
1.5  
* When you install the display lengthwise (rather than in  
its normal position), you need to adjust the display so  
that characters will appear properly.  
Note  
The display is a highly precise piece of equipment and therefore must be packed properly before transportation. Be sure to use only those packing  
materials originally supplied with the display when repacking it.  
Reference  
See P. E-40 for more information on options.  
E-7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SAFETY MEASURES  
To prevent accident and ensure safety in the event of an earthquake, fix the display securely into position as described below.  
FIXING THE DISPLAY TO A WALL OR PILLAR  
Safety braket A  
You need two strong cords.  
1 Attach a bracket to each hole at the rear of the display  
Screw A  
To do this, use screw A (10 mm long) to attach safety  
bracket A, supplied with the display, to the hole at the rear  
of the display.  
2 Attach two brackets to the wall  
To do this, use screws B (20 mm long) to attach safety  
brackets B, supplied with the display, to the wall.  
* To make sure that the display is stable, attach wall  
brackets at the same height as (or slightly lower than) the  
display brackets.  
Strong cords (not supplied)  
3 Tie brackets A and B together  
Screw A (10 mm)  
To do this, use strong cords to fix the display securely to  
the wall.  
Screw B (20 mm)  
Safety  
braket A  
Safety  
braket B  
FIXING THE DISPLAY TO THE STAND  
Use two screws, supplied with the stand, to fix the display  
using the holes provided at the rear of the stand.  
See the instruction manual for the stand (P-42TT11 type) for  
more information.  
Screw  
(supplied with stand)  
E-8  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PART NAMES AND FUNCTIONS  
Front  
1 Power indicator lamp  
This lamp shows whether the main power is ON or OFF, as  
follows:  
Lit (red):  
Standby  
Lit (green):  
Power ON  
Lit (orange): Power saving (DPMS: Power saving  
function) mode ON  
POWER  
Flashing (red): Malfunction (Flashes differently depending  
on the type of malfunction. See P. E-44 for  
more information.)  
1
2 Remote control signal receiver  
Receives signals from the remote control.  
3 Main Power Switch Indicator  
2
3
Indicates the location of the Main Power switch, at the bottom  
of the display.  
Control Panel  
4 Power button [POWER]  
POWER  
MODE WIDE  
MENU  
VOLUME  
ENTER  
Turns the power ON or OFF when the main power switch,  
provided at the bottom of the display, is ON.  
4
5 6  
7
8
9
0
5 Input mode selector button [MODE]  
Switches between image input modes.  
6 Wide screen selector button [WIDE]  
Switches the screen over to a desired wide screen.  
7 Menu button [MENU]  
The control panel opens when you press the lower center of the  
display.  
If you press the display again, the control panel closes.  
Displays image and sound adjustment menus.  
8 Volume adjustment buttons [VOLUME -/+]  
Adjust the volume.  
Note: The [  
/
] buttons can also be used to scroll through  
the options when a menu is displayed.  
9 Adjustment buttons [  
/
]
The [ ] buttons can also be used to scroll through options  
/
in a menu, or to change values.  
0 Set button [ENTER]  
Press this button to finalize the selection of a desired option in  
a menu.  
Warning  
If the power indicator lamp flashes red, this signifies that the display has developed a problem. When this happens, be sure to remove the  
power plug from the receptacle and contact your dealer. Leaving the display power ON can result in fire or electric shock.  
E-9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PART NAMES AND FUNCTIONS (Continued)  
Bottom  
D
1
2 3  
4
5 67  
8 90 A  
B
C
1 Main power switch  
Press this switch when the power is OFF to turn it ON. When you do so, the power indicator lamp will become red, indicating that  
you can turn ON or OFF the power to the display using either the remote control or the displays control panel.  
Press this switch when the power is ON to turn it OFF.  
2 RS-232C terminal (RS-232C)  
This terminal is provided for you to control the display from the PC. Connect it to the RS-232C terminal on the PC.  
When connecting a cable, attach a ferrite core to the cable. (PDS4213W-H only) (See P. E-14.)  
* No RS-232C cable is supplied with the display. The type of cable to be used varies depending on the PC model. Contact your  
dealer for more information.  
3 RGB2 synchronization switch (SYNC SW2 TTL/ANALOG (75 ))  
This switch is used to terminate the RGB2 terminal with 75 for receiving horizontal (H) and vertical (V) synchronization signals.  
TTL:  
Used when sending RGB signals from the PC to the RGB2 terminal  
ANALOG (75 ): Used when sending analog synchronization signals to the RGB2 terminal  
4 RGB2 input terminal (RGB2 INPUT/BNC x 5)  
Connect this terminal to the PCs display (analog RGB) output terminal.  
* No RGB cable is supplied with the display. The type of cable to be used varies depending on the PC model. Contact your dealer  
for more information.  
5 RGB1 input terminal (RGB1 INPUT/mD-sub)  
Connect this terminal to the PCs display (analog RGB) output terminal.  
* No RGB cable is supplied with the display. The type of cable to be used varies depending on the PC model. Contact your dealer  
for more information.  
6 RGB1 synchronization switch (SYNC SW1 TTL/ANALOG (75 ))  
This switch is used to terminate pins 13 and 14 of the RGB1 terminal with 75 respectively for receiving horizontal (H) and vertical  
(V) synchronization signals.  
TTL:  
Used when sending RGB signals from the PC to the RGB1 terminal  
ANALOG (75 ): Used when sending analog synchronization signals to the RGB1 terminal  
7 Sound1 input terminal (AUDIO 1 INPUT)  
Connect this terminal to the sound output terminal of your VCR, etc.  
8 Component video input terminal (COMPONENT VIDEO INPUT)  
Connect this terminal to the component video output (color difference output) terminal of your HDTV unit or DVD player.  
When connecting a cable, attach a ferrite core and wire clamper to the cable. (PDS4213W-H only) (See P. E-14.)  
9 S-video input terminal (S-VIDEO INPUT)  
Connect this terminal to the S-video output terminal of your VCR or video disk player.  
E-10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
0 Video input terminal (VIDEO INPUT)  
Connect this terminal to the video output terminal of your VCR or video disk player.  
A Sound2 input terminal (AUDIO2 INPUT)  
Connect this terminal to the sound output terminal of your VCR, etc.  
B External speaker output terminal (EXT SP)  
Connect this terminal to the optionally available speaker. (Use a speaker with 4 to 16 .)  
When connecting cables L and R, attach a ferrite core (with wire clamper) to each of the cables. (See P. E-14.)  
* See the speaker instruction manual for more information.  
C Power input terminal  
Connect this terminal to the power cable supplied with the display.  
D Built-in speaker  
Produces sound received through the sound input terminal.  
Description of Input Terminals  
RGB1 input terminal (RGB1 INPUT/mD-sub)  
Pin No. Input signal Pin No. Input signal  
1
2
3
4
5
6
7
8
Red  
9
Green  
Blue  
10  
Ground  
11  
12  
Ground  
Ground  
Ground  
Ground  
13  
Horizontal (H) synchronization  
14  
Vertical (V) synchronization  
15  
Frame  
Ground  
* Use the RGB1 synchronization switch to switch between TTL and ANALOG  
depending on the types of horizontal (H) and vertical (V) synchronization signals  
received through pins 13 and 14, respectively.  
RS-232C terminal (RS-232C)  
Pin No.  
Signal  
1
2
3
4
5
6
7
8
9
DCD (Data Carrier Detect)  
RD (Received Data)  
TD (Transmit Data)  
DTR (Data Terminal ready)  
GND (Ground)  
DSR (Data Set Ready)  
RTS (Request To send)  
CTS (Clear To Send)  
RI (Ring Indication)  
E-11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PART NAMES AND FUNCTIONS (Continued)  
Remote Control  
1 Power ON button [POWER ON]  
Turns the power ON.  
(See P. E-16.)  
VIDEO  
MENU  
2 Power OFF button [POWER OFF]  
Turns the power OFF.  
(See P. E-16.)  
3 RGB input mode selector button [RGB]  
Switches between RGB input modes.  
4 Video input mode selector button [VIDEO]  
Switches between video input modes.  
5 Wide screen selector button [WIDE]  
Switches the screen over to a desired wide screen.  
6 Menu button [MENU]  
(See P. E-17.)  
VOL  
(See P. E-17.)  
ENTER  
(See P. E-18E-19.)  
(See P. E-20E-39.)  
SHIFT  
1
2
3
4
Use this button to display a desired menu for adjusting the image and sound.  
7 Volume adjustment buttons [VOL +/-]  
Adjust the volume.  
(See P. E-16.)  
Press the + button to increase the volume.  
Press the - button to reduce the volume.  
8 Adjustment buttons [  
/
/
/
]
(See P. E-20E-39.)  
Use these buttons to scroll through options in a menu and change values.  
9 Enter button [ENTER]  
(See P. E-20E-39.)  
Press this button to finalize the selection of a desired menu or option within a menu.  
0 Display selector buttons [SHIFT 14]  
(See P. E-35E-39.)  
When you use two or more displays, you can use these buttons to control up to four displays  
by assigning a unique number to each of the displays.  
PUTTING BATTERIES IN THE REMOTE CONTROL  
1 To remove the cover, slide it  
2
outwards while pressing it down.  
Note  
The remote control will not function properly if the batteries are dead. Be sure to replace them as needed.  
Make sure that you use replace the batteries with new ones; also, be sure to use replacement batteries of the same type as the original ones.  
E-12  
USING THE REMOTE CONTROL  
PRECAUTIONS  
To prevent malfunction, be sure not to apply any form of severe shock to the remote control.  
To prevent malfunction or deformation, be sure not to allow the remote control to become wet; also, keep it away from hot locations or  
heating equipment.  
Be sure not to clean the remote control using a cloth dampened in any volatile solvent, such as benzene or thinner.  
EFFECTIVE RANGE FOR THE REMOTE CONTROL  
Point the remote control at the displays signal receiver when using it.  
Make sure that there are no obstacles between the remote control and the displays signal receiver.  
Upper  
20°  
20°  
Lower  
30°  
30°  
Left  
Rignt  
5 m (Front)  
VIDEO  
MENU  
VOL  
ENTER  
SHIFT  
1
2
3
4
Information  
The remote control may not function properly if you use a high-frequency fluorescent lamp. If you experience problems, move the lamp or use the  
remote control from a different position.  
E-13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT  
Be sure to turn OFF the power to the display and external equipment before making any connections.  
No cables are supplied with the display for connection to external equipment. The type of cable to be used varies depending on the PC  
model. Contact your dealer for more information.  
RECEPTACLE  
Make sure that the power cables grounding wire is grounded.  
The display comes with a 3-prong power plug; one prong is connected to the grounding wire. If you have only a 2-hole receptacle, you  
will need to have it replaced. Contact your dealer for more information.  
CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT  
Carefully check the terminals for position and type before making any connections.  
Loose connectors can result in image or color problems. Make sure that all connectors are securely inserted into their terminals.  
Replace the connector cover onto the display when you finish making the connections.  
Terminal  
Connector  
BNC  
VIDEO INPUT  
S-VIDEO INPUT  
COMPONENT VIDEO INPUT  
RGB INPUT  
S terminal  
BNC x 3  
mD-sub 15-pin  
BNC x 5  
AUDIO INPUT  
RS-232C  
Pin jack  
D-sub 9-pin  
Ferrite cores and wire clampers (PDS4213W-H only)  
These ferrite cores and wire clampers are used to attenuate undesired signals.  
Two ferrite cores and two wire clampers  
When connecting a cable to component video input terminal, RS-232C terminal, attach one of these ferrite cores to the cable near the  
terminal as shown below. (PDS4213W-H only)  
Ferrite core  
Ferrite core  
Wire clamper  
Wire clamper  
Ferrite cores (with wire clampers)  
These ferrite cores with wire clampers are used to attenuate undesired signals.  
Two ferrite cores (with wire clampers)  
When connecting a cable to the external speaker output terminal, attach one of these ferrite cores to the cable near the terminal.  
E-14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AUDIO1  
INPUT  
RGB1  
INPUT  
RGB2  
INPUT  
AUDIO2  
INPUT  
RS-232C  
VIDEO  
INPUT  
POWER INPUT  
S-VIDEO  
INPUT  
COMPONENT  
VIDEO INPUT  
(color difference  
input)  
To receptacle  
To sound To video To S-video  
To color  
difference  
output terminal  
To sound To display  
output (analog RGB)  
To display  
(analog RGB)  
output  
To RS-232C  
output  
terminal  
output  
output  
terminal  
output  
terminal  
terminal  
terminal  
output  
terminal  
terminal  
Connection to AV equipment  
Connection to PC  
E-15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC OPERATIONS  
TURNING ON THE POWER  
Press the main power switch at  
the bottom of the display.  
1
2
3
VIDEO  
MENU  
When you do so, the main power turns ON and  
the power indicator lamp turns red.  
VOL  
Press  
on the remote  
control.  
ENTER  
When you do so, the power indicator lamp turns  
green.  
SHIFT  
1
2
3
4
Press  
or  
to select a  
desired input mode.  
* You can also use the  
switches on the displays  
control panel to accomplish  
these steps.  
TURNING OFF THE POWER  
Press  
when the power is ON.  
The power indicator lamp turns red.  
ADJUSTING THE VOLUME  
Press  
Press  
to increase the volume.  
to reduce the volume.  
24�  
Any value between 0 and 40 can be selected.  
* Speaker offappears if you press or  
after you have  
selected No audiofor Audio input. (See P. E-35E-  
39.)  
When the volume adjustment button is  
pressed  
* Note that the volume level remains stored even when you  
turn OFF the power.  
E-16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SELECTING INPUT MODE  
VIDEO INPUT MODE  
S-video�  
Press  
to select a desired  
1
input mode.  
VIDEO  
MENU  
Each time you press , a different input mode  
appears. The sequence is as follows:  
VOL  
Video  
S-video  
Comp.video  
Video:  
Displays images from equipment  
connected to the Video terminal.  
S-video mode  
ENTER  
S-video:  
Displays images from equipment  
connected to the S-video terminal.  
SHIFT  
1
Comp.video�  
2
3
4
Comp.video: Displays images from equipment  
connected to the component video  
input terminal.  
* You can switch between video input modes  
while you are in RGB input mode.  
Comp.video mode  
* You can also use the  
switches on the displays  
control panel to accomplish  
these steps.  
RGB INPUT MODE  
RGB1�  
Press  
to select a desired  
1
input mode.  
VIDEO  
MENU  
Each time you press  
appears as follows:  
, a different input mode  
VOL  
RGB1  
RGB2  
RGB1: Displays images from equipment  
connected to the RGB1 (mD-sub)  
terminal.  
RGB1 mode  
ENTER  
SHIFT  
1
RGB2�  
RGB2: Displays images from equipment  
connected to the RGB2 (BNC x 5)  
terminal.  
2
3
4
* You can switch between RGB input modes  
while you are in a video input mode.  
RGB2 mode  
* You can also use the  
switches on the displays  
control panel to accomplish  
these steps.  
E-17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WATCHING IMAGES ON THE WIDE SCREEN  
SWITCHING BETWEEN SCREEN SIZES  
Press  
.
1
2
VIDEO  
MENU  
The currently selected mode will appear.  
VOL  
Normal�  
Press  
image mode.  
to select a desired  
Normal mode  
Each time you press , a different image mode  
appears. The sequences used are as follows:  
ENTER  
SHIFT  
1
When you are in a video input mode  
2
3
4
Normal  
Zoom2  
Auto  
Wide1  
Wide2  
Zoom1  
When you are in an RGB input mode  
Normal  
Wide  
Zoom  
Wide1�  
Wide1 mode  
* You can also use the  
switches on the displays  
control panel to accomplish  
these steps.  
Information  
You cannot select Auto mode when you are in Comp.video mode (video input mode).  
You may not be able to watch images clearly in Auto mode, depending on the contents of the image software you use. If you experience problems,  
use to switch to a mode that provides the optimum screen size.  
* With some games, the zoom screen (with upper and lower unviewable areas) may be selected.  
* With some images of standard size (i.e., 4 (frame width) x 3 (frame height)), the zoom screen may be selected if the upper and lower sections of  
the image in a scene are extremely dark.  
* Some images are designed such that the zoom screen is automatically selected as necessary. With some of these images, however, the screen size  
may not be immediately switched over to the zoom screen if the first scene contains an extremely dark image.  
Note  
A variety of image modes are available with this display. Remember that if you select a mode with an aspect ratio (ratio of frame width to frame  
height) different from that of the TV program or video media, the images will appear differently than if you had selected a mode having the same  
aspect ratio.  
Showing a movie or similar premium event at a different aspect ratio from its original one at any event site, restaurant, or bar for profit-making  
purposes or for a public audience may constitute a copyright infringement.  
For films, try to select a mode having the same aspect ratio as the original image; this enables the directors original intentions to be preserved.  
Reference  
See P. E-28E-29 for how to adjust the image size and position.  
E-18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SCREEN SIZE  
Normal  
Displays images of normal size (i.e., a 4:3 aspect ratio).  
Auto (Video Input Mode)  
The screen size changes automatically in accordance with the contents of image software  
you use.  
* You cannot select this mode if you have selected the Comp.video mode for input mode.  
Wide1 (Video Input Mode)  
Displays natural-looking images of standard size on the wide screen.  
Image of  
standard size  
Wide1  
Wide2  
Wide2 (Video Input Mode)/Wide (RGB Input Mode)  
Reduces the aspect ratio of images from 16:9 to 4:3.  
Ideal for displaying vertically extended images such as squeezed images and recorded  
HDTV programs.  
Vertically  
extended image  
Zoom1 (Video Input Mode)/Zoom (RGB Input Mode)  
Enlarges horizontally extended images equally in all directions to maintain the aspect  
ratio constant.  
Horizontally  
extended image  
Zoom1  
Zoom2  
Zoom2 (Video Input Mode)  
Reduces the height of horizontally extended images with captions, without eliminating  
the caption. Only the height of images is reduced, not the height of the caption.  
Horizontally extended  
image with caption  
(Captions may not be easy to read, however, depending on the image.)  
ASPECT RATIO  
The following aspect ratios are available.  
4
4:3 aspect ratio  
16:9 aspect ratio  
16  
(VHF/UHF broadcasting, BS broadcasting)  
(HDTV broadcasting, EDTV II  
(enhanced definition television II))  
3
9
1.85  
2.35  
1.85:1 aspect ratio  
(Vista Vision size)  
1
2.35:1 aspect ratio  
(Cinema Vision size)  
1
Information  
You may find dark areas on top and at the bottom of the screen if you select one of the Zoom modes for media while using the Vista Vision or Cinema  
Vision size i.e., the sizes used frequently for image software.  
E-19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HOW TO USE MENUS  
SELECTING OPTIONS IN A MENU  
Use the [MODE] button on the display or  
and  
on the remote control to select a desired input mode.  
▲�  
M E N U  
PICTURE  
Press  
.
1
2
3
The main menu screen will appear.  
MENUquit�  
ENTERnext�  
Press  
or  
to switch between subordinate menus.  
Ex.: PICTUREselected in the main menu  
screen  
Each time you press or , one of the available menus appears.  
Press  
or  
.
E N T E R  
The corresponding menu screen will appear.  
A total of four different menus (PICTURE, POSITION/SIZE, SOUND, OTHERS) are available.  
You can easily distinguish between these menus as shown below.  
PICTURE  
POSITION/SIZE  
SOUND  
OTHERS  
* Do not change input signals when any of the menus is displayed.  
E-20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING THE PICUTURE MENU  
When you finish selecting a desired option in the PICTURE menu screen, press  
At this time, the adjustment/setup screen for that option will appear.  
You can use or to change the value for the option. (See P. E-26E-27.)  
Changes you make will be stored only for the selected mode.  
or  
.
E
N
T
E
R
▲�  
▲�  
PICTURE  
PICTURE  
Contrast      0�  
Contrast      0 �  
--------+�  
--------+�  
Brightness    0�  
--------+�  
Brightness    0�  
--------+�  
Color         0�  
--------+�  
Color temp.  
       Standard�  
Dot clock     0�  
--------+�  
Clock phase.  0�  
--------+�  
Tint          0�  
--------+�  
Sharpness     0�  
--------+�  
Color temp.  
       Standard�  
MENUreturn�  
ENTERnext�  
MENUreturn�  
PICTURE Menu screen (Video Input Mode)  
PICTURE Menu screen (RGB Input Mode)  
Option  
Function  
Adjusts image contrast.  
Operation  
Range  
(1) Contrast  
: Higher contrast  
: Lower contrast  
-30 to +30  
(2) Brightness  
(3) Color  
Adjusts screen brightness.  
Adjusts color darkness.  
Adjusts tint.  
: Brighter screen  
: Darker screen  
-60 to +60  
-60 to +60  
: Darker colors  
: Lighter colors  
(4) Tint  
: More green-tinged colors  
: More purple-tinged colors  
-30 to +30 (Video, S-video)  
-60 to +60 (Comp.video)  
(for Video, S-video, Comp.video)  
(5) Sharpness  
(for Video, S-video, Comp.video)  
Adjusts image sharpness.  
: Sharper images  
: Less sharp images  
-30 to +30 (Video, S-video)  
-3 to +3 (Comp.video)  
(6) Color temp.  
Adjusts color temperature.  
Adjusts the dot clock.  
Use or for switching.  
Warm/Standard/Cool  
-300 to +300  
(7) Dot clock  
Eliminates blur when the  
(for RGB1, RGB2)  
optimum value is selected with  
or  
.
(8) Clock phase  
(for RGB1, RGB2)  
Adjusts clock phase.  
Eliminates blur when the  
optimum value is selected with  
0 to 15  
or  
.
E-21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HOW TO USE MENUS (Continued)  
USING THE POSITION/SIZE MENU  
When you finish selecting a desired option in the POSITION/SIZE menu screen, press  
When you do so, the adjustment screen for that option appears.  
or  
.
E
N
T
E
R
You can use or  
,
, and  
to change the value for the option. (See P. E-28E-29.)  
Changes you make will be stored only for the selected mode.  
  ▲�  
POSITION/SIZE�  
Position�  
Size�  
Position�  
Horizontal  
Vertical  
MENUreturn�  
▽△  adjust �  
+1�  
-1�  
MENUreturn�  
ENTERnext�  
POSITION/SIZE Menu screen  
Positionadjustment screen  
Option  
Function  
Operation  
Range  
(1) Position  
Horizontal  
Adjusts screen position.  
Adjusts horizontal position.  
Video, S-video  
Horizontal: -30 to +30  
Vertical  
: Moves screen to the right.  
: Moves screen to the left.  
Zoom: -15 to +15  
Others: -7 to +7  
Vertical  
Adjusts vertical position.  
: Moves screen up.  
: Moves screen down.  
Comp.video: -16 to +16  
RGB1, RGB2: -250 to + 250  
Video, S-video: -7 to +7  
Comp.video: -4 to +4  
(2) Size  
Width  
Adjusts screen size.  
Adjusts width.  
: Increases width.  
: Reduces width.  
RGB1, RGB2: -150 to +150  
Height  
Adjusts height.  
: Increases height.  
: Reduces height.  
E-22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING THE SOUND MENU  
When you finish selecting a desired option in the SOUND menu screen, use or to change the value for that option. (See P. E-30E-  
31.)  
Changes you make will be stored only for the selected mode.  
 ▲�  
SOUND�  
Treble  
0�  
--------+�  
0�  
Bass  
--------+�  
0�  
Balance  
Speaker  
--------+�  
Internal�  
MENUreturn�  
  adjust�  
SOUND Menu screen  
Option  
Function  
Operation  
Range  
(1) Treble  
Adjusts treble.  
: Stronger treble  
: Weaker treble  
-6 to +6  
(2) Bass  
Adjusts bass.  
: Stronger bass  
: Weaker bass  
-6 to +6  
(3) Balance  
Adjusts volume balance.  
:Higher volume from right-  
hand speaker  
-10 to +10  
:Higher volume from left-  
hand speaker  
(4) Speaker  
Selects built-in or external  
speakers.  
Use or for switching.  
Internal (built-in speakers)  
External (external speakers)  
E-23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HOW TO USE MENUS (Continued)  
USING THE OTHERS AND EXTENDED MENUS  
• Options with “ ” on the right  
When you select an option with “ ”, press  
or . The adjustment/setup screen for that option appears.  
E
N
T
E
R
You can use or on this screen to make selections or changes.  
• Options with no “ ” on the right  
When you select an option with no “ ”, press or to make selections or changes. (See P. E-32E-39.)  
Changes you make will be stored only for the selected mode.  
OTHERS Menu  
▲�  
▲�  
  More detailed�  
OTHERS�  
OSD  
Language�  
Monitor No.  
Video mode�  
OTHERS�  
OSD  
  adjustment items�  
On�  
0�  
On�  
  are included in�  
Language�  
Monitor No.  
Vertical sync  
Clamp pulse  
Status�  
  ’Extended menu’.�  
0�  
0�  
0�  
Auto�  
On�  
Extend menu�  
AGC  
Enter�  
Bluish white�  
Extended  menu�  
Return�  
On�  
Status�  
Extended  menu�  
MENUreturn�  
MENUreturn�  
MENUreturn�  
 select�  
ENTERapply�  
  select�  
OTHERS Menu screen (Video Input Mode)  
OTHERS Menu screen (RGB Input Mode)  
Extended menu message screen  
Option  
Function  
Selects whether to display  
Operation  
Range  
(1) OSD  
Use or for switching.  
On (displayed)  
information other than  
menus.  
Off (not displayed)  
(2) Language  
Selects language used for  
menus.  
Display the Language”  
selection screen and use  
to select a language.  
English  
or  
Deutsch (German)  
Español (Spanish)  
Français (French)  
Italiano (Italian)  
Português (Portuguese)  
Press  
E
N
T
E
R
to display menus  
in the selected language.  
Use or for switching.  
Use or for switching.  
Use or to select the  
(3) Monitor No.  
Selects display number.  
Selects video mode.  
0 (no setup)  
1/2/3/4  
(4) Video mode  
(for Video, S-video)  
Auto/NTSC/PAL/SECAM/  
N-PAL/M-PAL/4.43NTSC  
(5) Vertical sync  
Corrects vertical  
-2 to +1  
(for Comp.video, RGB1, RGB2)  
synchronization signal.  
optimum value for eliminating  
flicker.  
(6) Clamp pulse  
Adjusts clamp pulse.  
Use or for switching.  
0 to 8  
(for Comp.video, RGB1, RGB2)  
(7) AGC  
(for Video, S-video, Comp.video)  
Selects whether to enable  
AGC (auto gain control).  
Press  
status.  
E
N
T
E
R
to update the  
On (auto control)  
Off (fixed gain)  
(8) Bluish white  
(for Video, S-video)  
Makes white areas appear  
even whiter.  
Use or for switching.  
On (enabled)  
Off (disabled)  
(9) Status  
Displays system operation  
status.  
Displays the Status”  
information screen.  
Display only  
Press  
E
N
T
E
R
to update the  
status.  
(10) Extended menu  
Extended features  
(Extended menu)  
Displays a message screen.  
Enter: Displays Extended menu screen.  
Return: Returns to OTHERS Menu screen.  
E-24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Extended menu  
Extended menu  
Extended menu  
Extended menu  
           2/2�  
 △prev.�  
OSD rotate�  
           1/2�  
OSD rotate�  
Normal�  
Off �  
DPMS  
White screen�  
Normal�  
Studio mode  Off�  
White peak level�  
calibration�  
DPMS  
White screen�  
Off�  
Off�  
Screen saver�  
Input priority�  
Off�  
Sharpness      0�  
Gamma  
Still�  
Screen saver�  
Input priority�  
Gradation�  
Off�  
Mode 1�  
Audio input�  
3D Y/C  
Off�  
Vertical lines�  
480 Lines�  
On�  
Off�  
Audio input�  
 more▽�  
Studio mode  
Freq. scan  
Auto�  
MENUreturn�  
  select�  
MENUreturn�  
  select�  
MENUreturn�  
  select�  
Extended menu screen (Video Input Mode)  
Extended menu screen (RGB Input Mode)  
Option  
Function  
Operation  
Range  
(1) OSD rotate  
Rotates on-screen text.  
Use or for switching.  
Use or for switching.  
Use or for switching.  
-90 Deg. (counterclockwise)/  
Normal/  
+90 Deg. (clockwise)  
(2) DPMS  
Specifies time before  
DPMS starts.  
Off (disabled)  
1 min./3 min./5 min./10 min./  
30 min.  
(3) White screen  
(4) Screen saver  
Selects whether to display  
white over the entire  
screen.  
Off (disabled)  
Link DPMS/On  
Sets up screen saver.  
Display the Screen saver”  
adjustment screen and use  
to select an option.  
Use or to switch between  
available choices for the  
selected option.  
Function  
Off (disabled)  
Time (every 1 hr)  
Mode (every time mode is  
switched)  
or  
Moving area  
Narrow (moves in small  
range)  
Standard (moves in  
moderate range)  
Wide (moves in wide range)  
(5) Input priority  
(6) Audio Input  
Specifies input mode of  
highest priority.  
Use or for switching.  
Off/Video/S-video/  
Comp.video/RGB1/RGB2  
Select sound input  
terminals.  
Display the Audio input”  
selection screen and use  
Audio 1/Audio 2/No audio  
or  
to select an option.  
Use or to switch between  
available choices for the  
selected option.  
(7) 3D Y/C  
(for Video (3.58NTSC))  
Selects whether to enable  
the 3D Y/C circuit.  
Use or for switching.  
Use or for switching.  
Display the White peak level  
On (3D Y/C circuit)  
Off (3-line)  
(8) Studio mode  
Selects color temperature.  
On (for broadcasting stations)  
Off (for general users)  
(9) White peak level calibration  
(for RGB1, RGB2)  
Adjusts brightness.  
Execute (execute)  
Original (factory setting)  
Cancel (cancel)  
calibrationadjustment screen  
and use  
option.  
or  
to select an  
(10) Sharpness  
Adjusts sharpness.  
: Sharper images  
-3 to +3  
(for RGB1, RGB2)  
: Less sharp images  
(11) Gamma  
(for RGB1, RGB2)  
Makes gamma correction.  
Use or for switching.  
Motion (motion picture)  
Still (still picture)  
(12) Gradation  
(for RGB1, RGB2)  
Makes gradation correction. Use or for switching.  
Mode 1 (motion picture)  
Mode 2 (still picture)  
(13) Vertical lines  
(for RGB1, RGB2)  
Changes number of vertical Use or for switching.  
lines.  
350 Lines/400 Lines/  
480 Lines  
(14) Freq. scan  
(for RGB1, RGB2)  
Selects whether to enable  
auto frequency scanning.  
Use or for switching.  
Auto (scanning)  
Fix (fixed)  
E-25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADJUSTING IMAGES (PICTURE MENU)  
BASIC OPERATIONS [EX.: ADJUSTING TINT (Tint)]  
You can make changes to all image adjustment options in the PICTURE Menu.  
The changes you make will be stored for the selected input mode. Therefore, you need to select a desired input mode before making any  
changes.  
▲�  
M E N U  
PICTURE  
Press  
.
1
2
VIDEO  
MENU  
The main menu screen will appear.  
VOL  
Press  
or  
to select  
MENUquit�  
ENTERnext�  
PICTURE.  
PICTUREselected in the main menu  
Each time you press or , one of the available  
menus appears in the following sequence:  
ENTER  
screen  
SHIFT  
1
PICTURE  
POSITION/SIZE  
SOUND  
OTHERS  
2
3
4
Press  
or  
.
E N T E R  
3
The PICTURE Menu screen will appear.  
▲�  
PICTURE  
* You can also use the  
switches on the displays  
control panel to accomplish  
these steps.  
Press  
or  
to select Tint.  
Contrast      0 �  
--------+�  
4
5
Brightness    0�  
--------+�  
Color         0�  
--------+�  
Tint          0�  
--------+�  
Sharpness     0�  
--------+�  
Press  
or  
.
E N T E R  
Color temp.  
Standard�  
MENUreturn�  
The Tintadjustment screen will appear.  
Tintselected in the PICTURE Menu screen  
(Video Input Mode)  
Press  
values.  
or  
to change tint  
6
: More green-tinged colors  
: More purple-tinged colors  
Tint  
+30�  
--------+�  
MENUreturn�  
  adjust�  
Tintadjustment screen  
M E N U  
Press  
several times when  
you finish.  
* Repeat steps 4, 5, and 6 when you wish to make  
changes to other options.  
E-26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
V
V
S
S
C
C
R1 R2  
Adjusting Contrast (Contrast)  
Any value between -30 and +30 can be selected.  
: Higher contrast  
: Lower contrast  
R1 R2  
Adjusting Screen Brightness (Brightness)  
Any value between -60 and +60 can be selected.  
: Brighter screen  
: Darker screen  
Adjusting Color Darkness (Color)  
Any value between -60 and +60 can be selected.  
: Darker colors  
V
V
S
S
C
C
: Lighter colors  
Adjusting Tint (Tint)  
Any value between -30 and +30 for [  
], and -60 and +60 for [ ] can be selected.  
V S  
C
: More green-tinged colors  
: More purple-tinged colors  
V
S
C
Adjusting Image Sharpness (Sharpness)  
Any value between -30 and +30 for [ V S ], and -3 and +3 for [ C ] can be selected.  
: Sharper images  
: Less sharp images  
V
S
C
R1 R2  
Adjusting Color Temperature (Color temp.)  
Use or to specify a desired color temperature. Each time you press or , one of  
the available choices appears in the following sequence:  
Warm  
Standard  
Cool  
Warm: More red-tinged colors  
Standard: Standard color temperature  
Cool: More blue-tinged colors  
* You can adjust color temperature once you have selected Offfor Studio modein  
the OTHERS Menu. You cannot adjust color temperature if you have selected On”  
for Studio mode.(See P. E-35E-39.)  
R1 R2  
Adjusting Dot Clock (Dot clock)  
You may find that images blur, depending on the clock frequency of your PCs processor.  
If you experience blurring, you can obtain a clearer image by adjusting the Dot clock.  
Use or to select a value between -300 and +300.  
R1 R2  
Adjusting Clock Phase (Clock phase)  
You may find that images blur, depending on the clock phase of your PCs processor. If  
you experience blurring, you can obtain a clearer image by adjusting the Clock phase.  
Use or to select a value between 0 and 15.  
Note  
Use  
to switch over to the normal mode before adjusting the Dot clockor Clock phase.  
Information  
* On-screen information disappears if you do not take any action for 60 seconds.  
* The following abbreviations used in this document represent input modes in which you can make adjustments:  
V
S
C
R1  
R2  
: RGB1 mode, : RGB2 mode  
: Video mode, : S-video mode, : Comp.video mode,  
E-27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADJUSTING SCREEN POSITION AND SIZE (POSITION/SIZE MENU)  
BASIC OPERATION [EX.: ADJUSTING SCREEN POSITION]  
You can make changes to all screen adjustment options in the POSITION/SIZE Menu.  
The changes you make will be stored for the selected input mode. Therefore, you need to select a desired input mode before making any  
changes.  
  ▲�  
M E N U  
POSITION/SIZE�  
Press  
.
1
2
VIDEO  
MENU  
The main menu screen will appear.  
VOL  
Press  
or  
to select  
MENUquit�  
ENTERnext�  
POSITION/SIZE.  
POSITION/SIZEselected from the main  
menu screen  
Each time you press or , one of the available  
menus appears in the following sequence:  
ENTER  
SHIFT  
1
PICTURE  
POSITION/SIZE  
SOUND  
OTHERS  
2
3
4
Press  
or  
.
E N T E R  
3
The POSITION/SIZE Menu screen will appear.  
  ▲�  
Press  
Position.  
or  
to select  
* You can also use the  
switches on the displays  
control panel to accomplish  
these steps.  
POSITION/SIZE�  
Position�  
4
5
Size�  
Press  
or  
.
E N T E R  
MENUreturn�  
ENTERnext�  
The Positionadjustment screen will appear.  
Positionselected in the POSITION/SIZE  
Menu screen  
Press  
position values.  
,
,
, or  
to change  
6
: Moves screen up.  
: Moves screen down.  
Position�  
Horizontal  
Vertical  
MENUreturn�  
▽△  adjust �  
+1�  
-1�  
: Moves screen to the right.  
:
Moves screen to the left.  
Positionadjustment screen  
M E N U  
Press  
several times when  
you finish.  
* Repeat steps 4, 5, and 6 when you wish to make  
changes to other options.  
E-28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
V
S C R1 R2  
Adjusting Screen Position (Position)  
Horizontal position (Horizontal)  
:
:
Moves screen to the right.  
Moves screen to the left.  
Position�  
Horizontal  
Vertical  
MENUreturn�  
▽△  adjust �  
+1�  
-1�  
Positionadjustment screen  
Vertical position (Vertical)  
: Moves screen up.  
: Moves screen down.  
V
S C R1 R2  
Adjusting Screen Size (Size)  
Screen width (Width)  
:
:
Increases width.  
Reduces width.  
Size�  
Width  
+1�  
-1�  
Height  
MENUreturn�  
▽△  adjust �  
Sizeadjustment screen  
Screen height (Height)  
: Increases height.  
: Reduces height.  
Setting Range  
Video, S-video mode  
Comp.video mode  
RGB1, RGB2 mode  
Position  
Horizontal: -30 to +30  
Vertical  
-16 to +16  
-250 to +250  
Zoom:  
-15 to +15  
Others: -7 to +7  
Size  
-7 to +7  
-4 to +4  
-150 to +150  
* On-screen information disappears if you do not take any action for 60 seconds.  
* The following abbreviations used in this document represent input modes in which you can make adjustments:  
V
S
C
R1  
R2  
: RGB1 mode, : RGB2 mode  
: Video mode, : S-video mode, : Comp.video mode,  
E-29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADJUSTING SOUND (SOUND MENU)  
M E N U  
Press  
.
1
2
The main menu screen will appear.  
Press  
or  
to select SOUND.  
Each time you press or , one of the available  
menus appears in the following sequence:  
PICTURE  
POSITION/SIZE  
SOUND  
OTHERS  
Press  
or  
.
E N T E R  
The SOUND Menu screen will appear.  
Press  
Balance.  
or  
to select  
* You can also use the  
switches on the displays  
control panel to accomplish  
these steps.  
Press  
or  
to adjust the  
balance.  
: Higher volume from the right-hand speaker  
: Higher volume from the left-hand speaker  
M E N U  
Press  
several times when  
you finish.  
* Repeat steps 4 and 5 when you wish to make  
changes to other options.  
E-30  
V
V
V
V
S
S
S
S
C
C
C
C
R1 R2  
R1 R2  
R1 R2  
R1 R2  
Adjusting Treble (Treble)  
Any value between -6 and +6 can be selected.  
: Stronger treble  
 ▲�  
SOUND�  
Treble  
0�  
--------+�  
0�  
Bass  
--------+�  
0�  
Balance  
Speaker  
--------+�  
Internal�  
: Weaker treble  
MENUreturn�  
Adjusting Bass (Bass)  
Any value between -6 and +6 can be selected.  
: Stronger bass  
  adjust�  
SOUND Menu screen  
: Weaker bass  
Adjusting Volume Balance (Balance)  
Any value between -10 and +10 can be selected.  
: Higher volume from the right-hand speaker  
: Higher volume from the left-hand speaker  
Selecting Speakers (Speaker)  
Use or to select speakers.  
Each time you press or , one of the available choices appears in the following  
sequence:  
Internal  
External  
Internal: Internal speakers  
External: External speakers (not supplied)  
* On-screen information disappears if you do not take any action for 60 seconds.  
* The following abbreviations used in this document represent input modes in which you can make adjustments:  
V
S
C
R1  
R2  
: RGB1 mode, : RGB2 mode  
: Video mode, : S-video mode, : Comp.video mode,  
E-31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OTHER ADJUSTMENTS (OTHERS MENU)  
BASIC OPERATION [EX.: SELECTING LANGUAGE (Language)]  
You can make the following changes in the OTHERS Menu.  
Note that changes you make to on-screen information (OSD), language (Language), and monitor number (Monitor No.) will be shared in  
all input modes.  
The changes you make to other options in this menu will be stored for the selected input mode. Therefore, you need to select a desired  
input mode before making any changes.  
▲�  
M E N U  
OTHERS�  
Press  
.
1
2
VIDEO  
MENU  
The main menu screen will appear.  
VOL  
MENUquit�  
Press  
or  
to select OTHERS.  
ENTERnext�  
OTHERS selected in the main menu  
screen  
Each time you press or , one of the available  
menus appears in the following sequence:  
ENTER  
SHIFT  
1
PICTURE  
POSITION/SIZE  
SOUND  
OTHERS  
2
3
4
Press  
or  
.
E N T E R  
3
The OTHERS Menu screen will appear.  
▲�  
Press  
Language.  
or  
to select  
OTHERS�  
OSD  
Language�  
Monitor No.  
Video mode�  
* You can also use the  
switches on the displays  
control panel to accomplish  
these steps.  
On�  
0�  
4
5
Auto�  
On�  
AGC  
Bluish white�  
On�  
Status�  
Extended  menu�  
Press  
or  
.
E N T E R  
MENUreturn�  
ENTERnext�  
The Languageselection screen will appear.  
Languageselected in the OTHERS Menu  
screen (Video Input Mode)  
When “ ” appears to the right of an option, you  
can display the adjustment screen for that option  
by selecting the option and pressing  
or  
E
N
T
E
R
. You can then make changes or selections on  
that adjustment screen.  
Press  
language.  
or  
to select the  
Language�  
English�  
Deutsch�  
6
7
Espa  
Fran  
ñ
ol�  
ç
ais�  
Italiano�  
Portugu  
ê
s�  
Press  
.
E N T E R  
MENUreturn�  
ENTERapply�  
The menu is displayed in the selected language.  
Languageselection screen  
Press  
you finish.  
several times when  
E N T E R  
* Repeat steps 4 and 5 when you wish to make  
changes to other options.  
E-32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting Display Information (OSD)  
All modes  
You can use this option to select whether to display information other than menus.  
(Error messages are displayed regardless of what choice you make for this option.)  
Each time you press or , one of the available choices appears in the following  
sequence:  
On  
Off  
On: Displays all information.  
Off: Displays only menus and error messages.  
Selecting Language (Language)  
All modes  
Language�  
English�  
Deutsch�  
You can use this option to select the language displayed on the screen.  
Espa  
Fran  
ñ
ç
ol�  
ais�  
(1) Select Languageand press  
The Languageselection screen will appear.  
(2) Press or to select your desired language.  
English  
or  
.
E
N
T
E
R
Italiano�  
Portugu  
ê
s�  
MENUreturn�  
ENTERapply�  
Deutsch  
Español  
Français  
Italiano  
(German)  
Languageselection screen  
(Spanish)  
(French)  
(Italian)  
Português (Portuguese)  
(3) Press  
The menu is displayed in the selected language.  
.
E
N
T
E
R
M
E
N
U
(4) Press  
when you finish to return to the OTHERS Menu screen.  
Assigning Numbers to Displays (Monitor No.)  
All modes  
When you use two or more displays, you can use a single remote control to control  
individual displays by assigning a unique number to each of the displays.  
Each time you press or , one of the available numbers appears in the following  
sequence:  
0
1
2
3
4
0: You can normally control displays.  
You cannot control displays if you press any of [SHIFT 1] through [SHIFT 4].  
14: Allows you to control a desired display by pressing the corresponding button  
(one of [SHIFT 1] through [SHIFT 4]).  
When you do not press any of the SHIFT buttons, you can control all displays.  
* You can check the Monitor No.on the Status screen. (See P. E-34.)  
V
S
Selecting Video Mode (Video mode)  
You can use this option to select the desired video mode of images it will receive.  
Each time you press or , one of the available modes appears in the following sequence:  
Auto  
NTSC  
PAL  
SECAM  
N-PAL  
M-PAL  
4.43NTSC  
Auto: Automatically selects the video system.  
Other than Auto: You need to select a system appropriate to the input signal.  
* On-screen information disappears if you do not take any action for 60 seconds.  
* The following abbreviations used in this document represent input modes in which you can make adjustments:  
V
S
C
R1  
R2  
: RGB1 mode, : RGB2 mode  
: Video mode, : S-video mode, : Comp.video mode,  
E-33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OTHER ADJUSTMENTS (OTHERS MENU) (Continued)  
C
R1 R2  
Eliminating Flicker (Vertical sync)  
Corrects the vertical synchronization signal timing to eliminate vertical flicker.  
Use or to specify a value between -2 and +1.  
C
R1 R2  
Adjusting Clamp Pulse (Clamp pulse)  
Adjusts clamp pulse in accordance with the input signal received from connected  
equipment.  
Clamp pulse is automatically set at the optimal level when you do not use this option.  
Use or to specify a value between 0 and 8.  
V
S C  
Enabling AGC (AGC)  
Determines whether to employ AGC.  
Each time you press or , one of the available choices appears in the following  
sequence:  
On  
Off  
On: Automatically adjusts the gain to the optimal level.  
Off: Maintains the gain constant.  
V
S
Making White Areas Appear Even Whiter (Bluish white)  
Makes on-screen white areas appear even whiter.  
Each time you press or , one of the available choices appears in the following  
sequence:  
On  
Off  
On: Enables this function.  
Off: Disables this function.  
V
S
C
R1 R2  
Video�  
Displaying System Status (Status)  
Status�  
Monitor No.    0�  
Speaker�  
Internal�  
Displays system operation status.  
Video mode  
(1) Select Statusand press  
The Statusinformation screen will appear.  
(2) Check the status. Press when you wish to update the status.  
to return to the OTHERS Menu screen.  
or  
.
E
N
T
E
R
NTSC�  
Input signal�  
525I/60Hz�  
MENUreturn�  
ENTERrenew�  
E
N
T
E
R
M
E
N
U
(3) Press  
Statusinformation screen (Video Input  
Mode)  
Mode: Input mode appears at the upper right corner of the screen.  
Monitor No.: Monitor number  
RGB1�  
Status�  
Frequency: Frequency and polarity (fH, fV) (  
Speaker: Speaker type  
,
,
)
C
R1 R2  
Monitor No.    0�  
Speaker�  
        Internal�  
Freq. scan�  
Auto�  
Input signal�  
Separate�  
Freq. scan: Frequency scanning (  
,
)
R1 R2  
Frequency�  
fH 31.7kHz/-�  
fV 50.0 Hz/-�  
Video mode: Video mode (  
Input signal: Signal type  
,
only)  
V
S
Preset No.  
MENUreturn�  
ENTERrenew�  
255�  
Preset No.: RGB parameter number (  
,
only)  
R1 R2  
Statusinformation screen (RGB Input  
Mode)  
* On-screen information disappears if you do not take any action for 60 seconds.  
* The following abbreviations used in this document represent input modes in which you can make adjustments:  
V
S
C
R1  
R2  
: RGB1 mode, : RGB2 mode  
: Video mode, : S-video mode, : Comp.video mode,  
E-34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EXTENDED FEATURES (Extended menu)  
BASIC OPERATION [EX.: SETTING UP POWER SAVING FUNCTION (DPMS)]  
You can use this menu to make adjustments for all extended features.  
You can use the Extended menuscreen to make detailed adjustments.  
Use  
or  
on the OTHERS  
▲�  
OTHERS�  
OSD  
Language�  
Monitor No.  
Video mode�  
Menu screen to select Extended  
menu.  
On�  
0�  
1
2
VIDEO  
MENU  
Auto�  
On�  
AGC  
Bkuish white�  
On�  
Status�  
VOL  
Extended  menu�  
Press  
or  
.
E N T E R  
MENUreturn�  
ENTERnext�  
The message screen will appear.  
Extended menuselected in the OTHERS  
Menu screen (Video Input Mode)  
ENTER  
Press  
and press  
or  
to select Enter”  
.
SHIFT  
1
3
4
5
  More detailed�  
E N T E R  
  adjustment items�  
  are included in�  
2
3
4
  ’Extended menu’.�  
The Extended menuscreen will appear.  
Extend menu�  
Enter�  
Return�  
MENUreturn�  
ENTERapply�  
Message screen  
* You can also use the  
switches on the displays  
control panel to accomplish  
these steps.  
Extended menu  
OSD rotate�  
Normal�  
Off�  
Press  
or  
to select DPMS.  
DPMS  
White screen�  
Off�  
Screen saver�  
Input priority�  
When “ ” appears to the right of an option, you  
can display the adjustment screen for that option  
by selecting the option and pressing  
. You can then make changes or selections  
on that adjustment screen.  
Off�  
Audio input�  
3D Y/C  
On�  
Off�  
Studio mode  
or  
E
N
T
E
R
MENUreturn�  
  select�  
DPMSselected in the Extended menu  
screen (Video Input Mode)  
Extended menu  
OSD rotate�  
Normal�  
5 min.�  
DPMS  
White screen�  
Press  
or  
to set up the DPMS.  
Off�  
Screen saver�  
Input priority�  
Each time you press or , one of the available  
choices appears in the following sequence:  
Off�  
Audio input�  
3D Y/C  
On�  
Off�  
Studio mode  
Off  
1 min.  
3 min.  
5 min.  
10 min.  
30 min.  
MENUreturn�  
  select�  
DPMS setting screen (Video Input Mode)  
M E N U  
Press  
several times when  
you finish.  
* Repeat steps 4 and 5 when you wish to make  
changes to other options.  
Information  
DPMS (which stands for display power management signaling) allows the display to maintain an automatic power saving function. This function  
causes on-screen information to disappear until the next input operation, if the power is ON and the display has not received any signals for the  
predetermined period of time. When DPMS is active, the power indicator lamp turns orange.  
E-35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EXTENDED FEATURES (Extended menu) (Continued)  
The following classifies options in the extended menu by application or purpose:  
Extended menu  
OSD rotate�  
Extended menu  
Extended menu  
           2/2�  
 △prev.�  
           1/2�  
OSD rotate�  
Normal�  
Off �  
DPMS  
White screen�  
Normal�  
Studio mode  Off�  
White peak level�  
calibration�  
DPMS  
White screen�  
Off�  
Off�  
Off�  
Screen saver�  
Input priority�  
Sharpness      0�  
Screen saver�  
Input priority�  
Gamma  
Still�  
Gradation�  
Off�  
Mode 1�  
Audio input�  
3D Y/C  
Off�  
Vertical lines�  
480 Lines�  
On�  
Off�  
Audio input�  
 more▽�  
Studio mode  
Freq. scan  
Auto�  
MENUreturn�  
  select�  
MENUreturn�  
  select�  
MENUreturn�  
  select�  
Extended menu screen (Video Input Mode)  
Extended menu screen (RGB Input Mode)  
ADJUSTMENTS RELATED TO YOUR PC  
When images are brighter (darker) with a new PC  
R1 R2  
Adjusting brightness (White peak level calibration)  
White peak level�  
Select the optimum dynamic range for images.  
calibration�  
To do this, you need to create a totally white screen [input 255 to each of R, G, and B] using the  
PCs paint program. Then, display that screen and perform a white peak level calibration. Follow  
the steps below.  
Execute�  
Original�  
Cancel�  
E
N
T
E
R
1 Select White peak level calibrationand press  
The White peak level calibrationadjustment screen will appear.  
2 Press or to select one of the following:  
or  
.
MENUreturn�  
ENTERapply�  
White peak level calibrationadjustment  
Execute: Performs white peak level calibration.  
Original: Restores factory settings.  
screen  
Cancel: Cancels calibration and maintains current setting.  
E
N
T
E
R
3 Press  
4 Press  
.
M
E
N
U
to return to the Extended menuscreen.  
When improving image quality (from PC)  
R1 R2  
Adjusting image sharpness (Sharpness)  
Any value between -3 and +3 can be selected.  
: Sharper images  
: Less sharp images  
R1 R2  
Making gamma correction (Gamma)  
You can use this option to make a dynamic gamma correction suitable for still or motion pictures.  
Each time you press or , one of the available choices appears in the following sequence:  
Motion  
Still  
Motion: Suitable for watching a motion picture.  
Still: Suitable for watching a still picture.  
R1 R2  
Correcting gradation (Gradation)  
You can use this option to make gradation corrections suitable for still or motion pictures.  
Each time you press or , one of the available choices appears in the following sequence:  
Mode 1  
Mode 2  
Mode 1: Suitable for watching motion pictures.  
Mode 2: Suitable for watching still pictures.  
R1 R2  
Changing the number of lines displayed (Vertical lines)  
This display automatically selects vertical lines in accordance with the input signals received. Each  
time you press or , one of the available vertical lines appears in the following sequence:  
350 Lines  
400 Lines  
480 Lines  
E-36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
R1 R2  
Frequency scanning (Freq. scan)  
You can use this option to perform automatic frequency scanning to ensure optimum image quality.  
Each time you press or , one of the available choices appears in the following sequence:  
Auto  
Fix  
Auto: Performs automatic frequency scanning at all times for optimum image quality.  
Fix: Maintains the current frequency constant.  
SCREEN PROTECTION AND POWER SAVING  
The screen protection functions minimize phosphor burn-in but cannot completely eliminate it.  
Selecting time before DPMS starts (DPMS)  
All modes  
You can use this option to select the amount of time before the DPMS function starts.  
DPMS (which stands for display power management signaling) allows the display to maintain an  
automatic power saving function.  
This function causes on-screen information to disappear until the next input operation, if the power  
is ON and the display has not received any signals for the predetermined period of time. When  
DPMS is active, the power indicator lamp turns orange.  
Each time you press or , one of the available choices appears in the following sequence:  
Off  
1 min.  
3 min.  
5 min.  
E-37  
EXTENDED FEATURES (Extended menu) (Continued)  
Minimizing phosphor burn-in (Screen saver)  
All modes  
Screen saver�  
You can use this option to move the screen position to minimize phosphor-induced burning.  
Function  
Off�  
Follow the steps below.  
Moving area�  
Standard�  
E
N
T
E
R
1 Select Screen saverand press  
The Screen saversetting screen will appear.  
2 Press or to select Function.  
or  
.
MENUreturn�  
  select�  
3 Select a desired pattern.  
Screen saversetting screen  
Each time you press or , one of the available choices appears in the following sequence:  
Off  
Time  
Mode  
Off: Disables screen saver.  
Time: Moves the pattern every one hour.  
Mode: Moves the pattern when the power is turned ON or when you switch between modes.  
4 Press  
or  
to select Moving area.  
5 Press or to select the range for moving the pattern.  
Each time you press or , one of the available choices appears in the following sequence:  
Narrow  
Standard  
Wide  
Narrow: Pattern moves in small range.  
Standard: Pattern moves in moderate range.  
Wide: Pattern moves in wide range.  
M
E
N
U
6 Press  
when you finish to return to the Extended menuscreen.  
Using screen protection functions (examples)  
When using the display occasionally  
When using the display continuously  
1 Select Link DPMSfor White screen.  
When switching between RGB and video input modes only  
occasionally  
1 Select Timefor Functionwith Screen saver.  
2 Select a desired range for Moving areawith Screen saver.  
This causes the screen saver pattern to move in the same range at  
regular intervals.  
2 Select a desired amount of time for DPMS.  
Thus, when the display does not receive a signal, it will automatically  
display white over the entire screen. When the predetermined time  
elapses, the power will turn OFF.  
When switching between RGB and video input modes  
frequently  
1 Select Modefor Functionwith Screen saver.  
2 Select a desired range for Moving areawith Screen saver.  
This causes the information displayed to move when you switch  
between modes.  
OTHERS  
When displaying images for shooting in studio  
Adjusting color temperature for reshooting (for broadcasting stations)  
V
S
C
R1 R2  
(Studio mode)  
You can use this option to reduce the color temperature to a level suitable for studio use.  
Each time you press or , one of the available choices appears in the following sequence:  
On  
Off  
On: Adjusts color temperature so that it is appropriate for reshooting.  
Off: Specifies the normal color temperature.  
When you select Onfor this option, the choice made for Color temp.(color temperature) in the  
PICTURE Menu will be ignored.  
* See P. E-26E-27 for information on how to specify color temperature.  
E-38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
When rotating text (for installing the display with one of its sides  
facing down)  
Rotating text (OSD rotate)  
All modes  
You can use this option to rotate the text.  
Each time you press or , one of the available choices appears in the following sequence:  
-90 Deg.  
Normal  
+90 Deg.  
-90 Deg.: Displays text from left to right when the display is installed with the power indicator  
lamp at the top.  
Normal: Displays text normally.  
+90 Deg.: Displays text from left to right when the display is installed with the power indicator  
lamp at the bottom.  
When selecting automatic switching to desired mode  
Input mode of priority (Input priority)  
All modes  
You can use this option to switch between modes only when a signal is received through the  
selected input mode terminal. You cannot switch the input mode.  
Each time you press or , one of the available choices appears in the following sequence:  
Off  
Video  
S-video  
Comp.video  
RGB1  
RGB2  
Off: Switches between modes normally.  
Other modes: Displays images when a signal is received through the selected input mode  
terminal.  
* You cannot switch between RGB1 and RGB2.  
You cannot select the currently selected mode.  
You cannot switch between input modes when you have selected a mode with this option.  
When changing sound input  
Selecting input terminals (Audio input)  
All modes  
Audio input�  
You can use this option to select one of the two available terminals to receive sound from input  
equipment.  
RGB1  
Audio 1�  
RGB2  
Audio 1�  
Audio 2�  
Video  
S-video  
E
N
T
E
R
1 Select Audio inputand press  
The Audio inputselection screen will appear.  
2 Press or to select input equipment.  
or  
.
Audio 2�  
Comp. video�  
Audio 2�  
MENUreturn�  
3 Select a desired input terminal.  
  select�  
Each time you press or , one of the available choices appears in the following sequence:  
Audio inputselection screen  
Audio 1  
Audio 2  
No audio  
Audio 1, Audio 2: Selects Audio 1 or 2 for receiving sound in the corresponding mode.  
No audio: No sound in the corresponding mode.  
* Repeat steps 2 and 3 for each piece of input equipment.  
M
E
N
U
4 Press  
when you finish to return to the Extended menu screen.  
V
Enabling 3D Y/C Circuit (3D Y/C)  
Selects whether to use the 3D Y/C circuit.  
Each time you press or , one of the available choices appears in the following sequence:  
On  
Off  
On: Enables the 3D Y/C circuit.  
You can make this selection only for 3.58NTSC signal.  
Off:Enables 3-line.  
* On-screen information disappears if you do not take any action for 60 seconds.  
* The following abbreviations used in this document represent input modes in which you can make adjustments:  
V
S
C
R1  
R2  
: RGB1 mode, : RGB2 mode  
: Video mode, : S-video mode, : Comp.video mode,  
E-39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPTIONS  
Wall-mounting unit  
(for both vertical and horizontal)  
Vertical: 0° to 5° mounting angle  
P-42WB11  
P-42CT11  
P-42TT11  
Horizontal: 0° to 15° mounting angle  
Hanging unit  
0° to 15° mounting angle (variable)  
The pipe is not supplied with the ceiling-  
hanging unit, so consult your produce dealer.  
Stand  
Speaker  
P-42SP11  
(1 set of 2 speakers)  
Speaker stand  
P-42ST11  
(1 set of 2 speakers  
stands)  
Graphics board  
(You can display a wide screen (i.e., 852 dots  
x 480 lines) when you use a graphics board  
with your IBM PC or a compatible unit.)  
P-42GA04  
* When installing an option, make sure that all installation requirements for that optionas given in the relevant instruction manualare  
met.  
* The colors of options do not match the display colors perfectly.  
Warning  
To prevent injury, fire, and electric shock, arrange for options to be initially installed (or installed at a different location) by your dealer.  
E-40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FACTORY SETTINGS  
This display can store parameter settings for eight additional signals for both RGB1 and RGB2.  
To do this, select a desired signal and follow the instructions in Adjusting Screen Position and Sizeon P. E-28E-29 to adjust the  
parameters. When you finish, the settings will be automatically stored. Thus, when the display receives that signal, images will be  
displayed in accordance with the settings you most recently selected.  
This display has been factory-set for 18 different signals as shown below.  
Factory-set signals (RGB1, RGB2 modes)  
Display (dots x lines)  
852 x 480  
640 x 480  
640 x 480  
640 x 480  
640 x 480  
720 x 400  
640 x 400  
800 x 600  
640 x 400  
800 x 600  
800 x 600  
1024 x 768  
640 x 480  
848 x 480  
640 x 480  
640 x 480  
640 x 400  
640 x 400  
Horizontal frequency (kHz)  
Vertical frequency (Hz)  
59.97  
Signal  
31.72  
31.47  
37.86  
37.50  
43.27  
31.47  
37.86  
35.16  
37.88  
48.08  
48.88  
48.36  
35.00  
31.02  
15.73  
15.63  
24.82  
31.50  
15.63 to 80.00*  
When a dedicated graphics card is used  
VGA  
59.94  
72.81  
VGA 72 Hz  
75.00  
VGA 75 Hz  
85.01  
VGA 85 Hz  
70.09  
VGA 400 lines  
VGA 400 lines  
SVGA 56 Hz  
SVGA 60 Hz  
SVGA 72 Hz  
SVGA 75 Hz  
XGA 60 Hz  
85.08  
56.25  
60.32  
72.19  
75.00  
60.00  
66.67  
MAC 13RGB  
60.00  
59.94  
60 fields  
50.00  
50 fields  
56.42  
NEC 24 kHz  
NEC 31 kHz  
User setting  
70.15  
50.00 to 120.00*  
* With some input signals, Out of rangemay appear even when the horizontal and vertical frequencies are within their permissible ranges. Make  
sure that the vertical frequency of the input signal is 75 Hz or less for SVGA and 60 Hz for XGA.  
In the Comp.video and Video/S-video modes, the display has been factory-set as follows for different input signals:  
Factory-set signals (Comp.video mode)  
Factory-set signals (Video, S-video mode)  
Horizontal  
Vertical  
Horizontal  
Vertical  
Signal  
Signal  
NTSC  
frequency (kHz)  
frequency (Hz)  
frequency (kHz)  
frequency (Hz)  
15.73  
15.63  
31.47  
45.00  
44.96  
33.75  
33.72  
59.94  
SDTV 525i  
SDTV 625i  
SDTV 480p  
HDTV 720p  
HDTV 720p  
HDTV 1080i  
HDTV 1080i  
15.73  
15.63  
15.63  
15.73  
15.73  
15.63  
59.94  
50.00  
59.94  
60.00  
59.94  
60.00  
59.94  
50.00  
50.00  
59.97  
59.97  
50.00  
PAL  
SECAM  
4.43NTSC  
M-PAL  
N-PAL  
The dedicated graphics card is optionally available.  
With the 800 x 600 and 1024 x 768 modes, images of reduced size are displayed on the screen, using size reduction and interpolation. Note also  
that on-screen information is also displayed in reduced size.  
• “Out of rangeappears if the display receives a signal whose characteristic does not fall within the displays permissible range.  
You can check input signals through Statuson the OTHERS Menu screen. (See P. E-32E-34.)  
All terms (i.e., company and product names) used in this document are trademarks or registered trademarks.  
E-41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIFICATION  
Model  
PDS4213W-H/PDS4214W-S  
Screen size  
42" wide screen (92.0 cm (W) x 51.8 cm (H) x 105.6 cm (Diagonal))  
Aspect ratio  
16:9 (wide)  
Weight  
31.5 kg  
Outer dimensions  
Power supply  
Power consumption  
Screen dimensions  
Number of pixels  
Display modes  
103.5 (W) x 64.0 (H) x 8.5 (D) cm  
100240 VAC 50/60 Hz  
3.9 A (800 VA: Power ON, instantaneous power when outputting image)  
92.0 (W) x 51.8 (H) cm  
852 (H) x 480 (V)  
Video, S-video input:  
Component video input: Normal /Wide1/Wide2/Zoom1/Zoom2  
RGB input: Normal/Wide/Zoom  
Normal/Auto/Wide1/Wide2/Zoom1/Zoom2  
Colors  
16.77 million (for each of 256 RGB gradations)  
1 W + 1 W (EIAJ)  
Sound output  
Speakers  
2 built-in speakers  
External equipment terminals  
Video input terminals  
Video image input  
S-video image input  
1 BNC terminal 1 Vp-p/75 Ω  
1 S terminal  
Y:  
C:  
1 Vp-p/75 Ω  
0.3 Vp-p/75 Ω  
Component video input (color difference input)  
3 BNC terminals Y:  
1 Vp-p/75 Ω  
Pb/B-Y: 0.7 Vp-p/75 Ω  
Pr/R-Y: 0.7 Vp-p/75 Ω  
Applicable systems  
PC input terminal  
NTSC/PAL/SECAM/N-PAL/M-PAL/4.43NTSC  
RGB1 input terminal  
RGB2 input terminal  
mD-sub, 3 rows, 15-pin  
Image signal: 0.7 Vp-p/75 Ω  
Synchronization signal: TTL level or 0.3 Vp-p/75 Ω  
BNC terminal x 5  
R: 0.7 Vp-p/75 Ω  
G: 0.7 Vp-p/75 Ω  
B: 0.7 Vp-p/75 Ω  
H: TTL level or 0.3 Vp-p/75 Ω  
V: TTL level or 0.3 Vp-p/75 Ω  
Sound terminals  
Control terminal  
2 sound input pin jacks (L/R) (2 lines)  
500 mVrms/at least 22 kΩ  
1 RS-232C connector (D-sub 9-pin)  
External speaker output terminal Lever terminal, 1 line (L/R)  
Effective max. output: 7 W + 7 W (EIAJ), 8 Ω  
Temperature: 0 to 40°C  
Humidity: 20 to 90%  
1 connector cover, 1 remote control, 1 strap (for remote control), 2 AA batteries,  
Operating conditions  
Accessories  
1 instruction manual, 2 safety brackets of each type (2 types), 2 screws of each type (2 types),  
2 ferrite cores (with wire clampers), 2 ferrite cores (PDS4213W-H only),  
2 wire clampers (PDS4213W-H only), 2 cable clampers, 3 power cables  
Specifications and external appearance may be change for the sake of improvement.  
is a worldwide trademark of Fujitsu General Limited and is a registered trademark in Japan, the U.S.A. and other countries or areas.  
E-42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Regulation ··· PDS4213W-H  
UL, CSA ····· Safety: UL1950/CSA C22.2 No.950  
EMC: FCC Part 15 Class A, ICES-003 Class A  
CE ··············· Safety: EN60950 1992, A1: 1993, A2: 1993, A3: 1995, A4: 1997  
EMC: EN55022  
EN61000-3-2  
1994, Class A  
1995  
EN61000-3-3  
EN55024  
1995  
1998  
EN61000-4-2  
1995  
EN61000-4-3  
1996  
EN61000-4-4  
1995  
EN61000-4-5  
1995  
EN61000-4-6  
1996  
EN61000-4-8  
1993  
EN61000-4-11  
1994  
AS ··············· Safety: IEC950 A1/A2/A3/A4  
EMC: AS/NZS 3548  
Regulation ··· PDS4214W-S  
UL, CSA ····· Safety: UL1950/CSA C22.2 No.950  
EMC: FCC Part 15 Class B, ICES-003 Class B  
CE ··············· Safety: EN60950 1992, A1: 1993, A2: 1993, A3: 1995, A4: 1997  
EMC: EN55022  
EN61000-3-2  
1994, Class B  
1995  
EN61000-3-3  
EN55024  
1995  
1998  
EN61000-4-2  
1995  
EN61000-4-3  
1996  
EN61000-4-4  
1995  
EN61000-4-5  
1995  
EN61000-4-6  
1996  
EN61000-4-8  
1993  
EN61000-4-11  
1994  
AS ··············· Safety: IEC950 A1/A2/A3/A4  
EMC: AS/NZS 3548  
E-43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CLEANING AND MAINTENANCE  
Precautions  
Cleaning the Cabinet and Remote Control  
Be sure to remove the power plug from the receptacle before  
cleaning the display.  
Use a soft cloth for cleaning.  
If the cabinet or remote control is heavily stained, soak a soft cloth  
in a mixture of water and detergent and squeeze it dry before  
wiping off the stains. Use a soft, dry cloth for final cleaning.  
Be sure not to clean the display using a cloth dampened with  
volatile solvents, such as benzene or thinner. Such solvents can  
harm the displays cabinet, the filter at the screen front, and the  
remote control. They can also cause paint to come off these  
sections.  
Cleaning the Screen  
Clean the screen gently with a soft cloth.  
The screen surface is fragile. Never attempt to clean it with a hard  
material, press on it forcefully, or tap it.  
HANDY TIPS  
In the event of problems with the display, check the following explanations before contacting your dealer for servicing.  
Problem  
Power does not turn ON.  
No images are displayed.  
Action  
Check whether the power plug is securely inserted into the receptacle.  
Check cables for disconnection.  
Check whether the power for all input equipment is ON.  
Check for connection to wrong terminals or for wrong input mode.  
Remote control does not function properly. Check for incorrect battery orientation.  
Check for dead batteries.  
Check for distance from the display.  
Check whether you are pointing the remote control transmitter properly at the displays  
receiver.  
Check for any obstacle between the remote control and the display.  
The display makes a snapping sound.  
The display makes a buzzing sound.  
There are spots on the screen.  
Degraded colors/tints  
This sound is produced when the cabinet expands or contracts due to variations in  
temperature. This sound does not indicate that the display has a problem.  
The display has a fan to maintain the temperature of internal components at a constant  
level. This sound is produced by the fan as it rotates.  
Check whether your AV equipment is affected by interference from automobiles, trains,  
high-voltage transmission lines, neon signs or other potential sources of interference.  
Check whether all image adjustments have been properly made.  
(See Adjusting Imageson P. E-26E-27.)  
Improper screen position/size  
No sound from the built-in speakers  
No sound from external speakers  
Check whether screen position and size have been properly adjusted.  
(See Adjusting Screen Position and Sizeon P. E-30E-31.)  
Check whether you have set the display for use of internal speakers.  
(See Adjusting Soundon P. E-28E-29.)  
Check cables for disconnection.  
Check whether you have set the display for use of external speakers.  
(See Adjusting Soundon P. E-28E-29.)  
No sound  
Check whether you have selected No audiofor the Audio inputsetting.  
(See Extended Featureson P. E-35E-39.)  
If Invalid operationappears.  
Check whether you have selected Input priority.  
(See Extended Featureson P. E-35E-39.)  
If Out of rangeappears, the display is  
receiving a signal whose image or signal  
cannot be reproduced by the display.  
Input proper signals.  
Make sure that the vertical frequency of the input signal is 75 Hz or less for SVGA and  
60 Hz for XGA.  
If Error message Condition 1appears,  
the fan is defective.  
Turn OFF the main power switch, remove the power plug from the receptacle, and  
contact your dealer for repairs.  
If Error message Condition 2appears,  
the displays internal components are  
extremely hot.  
Turn OFF the main power immediately. (You can turn the power back ON again when  
the components have cooled sufficiently.) If the message appears again when you turn  
the power back on, turn off the main power switch, remove the power plug from the  
receptacle, and contact your dealer for a repairs.  
If the power indicator lamp flashes red.  
Turn OFF the main power switch, remove the power plug from the receptacle, and  
inform your dealer about how the lamp flashed.  
As explained below, the power indicator lamp flashes differently depending on the type  
of problem:  
Flashes repeatedly: Improper supply voltage level  
Flashes once: Malfunction by the fan  
Flashes twice: Excessive temperature  
Flashes three times or more: Other problems  
E-44  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Dynex TV Video Accessories DX WD1201 User Manual
Earthquake Sound Speaker IQ600 User Manual
Evo Fitness Projector XGA User Manual
Fagor America Electric Pressure Cooker M16301457 10 03 User Manual
FMI Indoor Fireplace F48HIR User Manual
Focal Car Amplifier Solid 4 User Manual
Fujitsu Printer DL3600 User Manual
GE Convection Oven PT920SM User Manual
Global Machinery Company Drill HD1400K User Manual
Goodman Mfg Air Conditioner SS DSZC18 User Manual