Contents
Notational conventions................................................................................................................. 2
Transport...................................................................................................................................... 4
Preparing for use.................................................................................................................................. 5
Preparing remove control............................................................................................................. 6
Installing plasma TV..................................................................................................................... 7
Connecting plasma TV............................................................................................................... 13
Switching plasma TV on/off........................................................................................................ 14
Adjusting programme settings.................................................................................................... 16
Remote control........................................................................................................................... 22
PIP (Picture in Picture)....................................................................................................... 23
Changing device settings with remote control............................................................................ 24
SOUND menu - sound settings.......................................................................................... 26
Display modes.................................................................................................................................... 31
PIP mode (Picture in Picture)..................................................................................................... 32
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Your new plasma TV MYRICA P42-1A / P42-2 / P50-2possesses a whole range of useful features
and functions, e.g.:
●
●
●
●
●
TFT monitor (Thin Film Transistor; active matrix)
analogue tuner for VHF, UHF and cable programmes
connections for SCART (video and RGB), video and S-Video
minimal space requirements thanks to slim casing
optimum ergonomic characteristics (totally distortion-free and colour purity right into the
corners)
●
●
●
●
●
●
●
●
●
●
●
high degree of brightness and good contrast
high resolution for operation on a PC
easy-to-operate remote control
convenient operation via integrated OSD (On-Screen-display) menu
2 tuner picture in picture
picture size changeover: full-screen, panorama, zoom 1 and zoom 2
power management for reducing power consumption when the computer is not in use
integrated dual-channel loudspeakers
integrated NICAM/IGR sound decoder for stereo and two-channel sound
automatic switch-off function
Teletext
This operating manual contains important information you require to start up and run your device.
For TV operation with the integrated tuner, a terrestrial antenna or a cable connection is required. As
an alternative, a satellite receiver can be connected to one of the SCART jacks.
When you put the device into operation for the first time, you should carry out a programme search
Target group
You don't need to be an "expert" to perform the operations described here. Do, however, read the
"Important notes" chapter in the operating manual of the computer and in this operating manual.
In the event of any problems occurring, please contact your sales outlet or our help desk.
Additional information
Details of how you set the resolution and refresh rate are provided in the documentation on your
screen controller/the associated driver software.
English - 1
Download from Www.Somanuals.com. All Manuals Search And Download.
MYRICA P42-1A / P42-2 / P50-2
Notational conventions
The meanings of the symbols and fonts used in this manual are as follows:
Pay particular attention to text marked with this symbol. Failure to observe this warning
endangers your life, destroys the device, or may lead to loss of data.
!
Supplementary information, remarks, and tips follow this symbol.
i
►
Text which follows this symbol describes activities that must be performed in the order shown.
"Quotation marks" indicate names of chapters or terms.
Texts in italics indicate filenames and menu items.
Important notes
In this chapter you will find information regarding safety which is essential to take note of with your
plasma TV.
Avoid still images on the screen for longer periods, e.g. still images from videos, sender
label etc. (maximum of 1 hour).
!
This pictures may remain visible! Also avoid longer operation in a picture mode in which
black bars are visible. These black bars can also remain visible.
This product from Fujitsu Siemens Computers contains intellectual property of third
parties. Any tampering with or modification of the product will void the warranty and may
lead to legal prosecution to the full extent of the law.
!
Safety notes
This device complies with the relevant safety regulations for data processing equipment, including
electronic office machines for use in an office environment. If you have any questions, contact your
sales outlet or our help desk.
●
●
●
●
The display surface of the plasma TV is sensitive to pressure and scratches. You should
therefore be careful with the display surface so as to avoid lasting damage (Newton rings,
scratches).
If the device is brought into the installation site from a cold environment, condensation can
form. Before operating the device, wait until it is absolutely dry and has reached approximately
the same temperature as the installation site.
During installation and before operating the device, please observe the instructions on
environmental conditions in the "Technical data" chapter as well as the instructions in the
To ensure sufficient ventilation, the intake and exhaust air openings of the device must never
be blocked.
A26361-K1040-Z120-1-M119, edition 3
Download from Www.Somanuals.com. All Manuals Search And Download.
MYRICA P42-1A / P42-2 / P50-2
●
●
The device may not be placed on the floor.
he device automatically sets itself to the correct voltage within the range from 100 V to 240 V.
Ensure that the local mains voltage lies within these limits.
●
●
Ensure that the power socket on the device or the earthed mains outlet is freely accessible.
The ON/OFF switch does not disconnect the device from the mains voltage. To completely
disconnect the mains voltage, remove the power plug from the socket.
●
●
Lay all cables so that nobody can stand on them or trip over them. When attaching the device,
observe the relevant notes in the "Preparing for use" chapter.
If you use a different PC data cable from the one supplied, ensure that it is adequately
shielded. CE conformance and optimum picture quality are guaranteed only if you use the data
cable supplied.
●
●
No antenna or data transfer cables should be connected or disconnected during a
thunderstorm.
Make sure that no objects (e.g. jewellery chains, paper clips, etc.) or liquids get inside the
device (danger of electric shock, short circuit).
●
●
The device is not waterproof! Protect the device from spray water (rain, sea water).
In emergencies (e.g. damaged casing, elements or cables, penetration of liquids or foreign
matter), switch off the unit, disconnect the power plug and contact your sales outlet or our help
desk.
●
The device must be disposed of in accordance with the local regulations for disposal of special
waste. During handling and disposal, the safety regulations applicable to fluorescent materials
must be observed.
●
●
Only qualified technicians should repair the device. Unauthorised opening and incorrect repair
may greatly endanger the user (electric shock, fire risk).
You may set only those resolutions and refresh rates specified in the "Technical data" chapter.
Otherwise you may damage your monitor. If you are in any doubt, contact your sales outlet or
our help desk.
●
●
Use a screen saver with moving images in PC mode and activate the power management for
your monitor to prevent still images from "burning in".
Keep this operating manual together with your device. If you pass on the device to third parties,
you should include this manual.
English - 3
Download from Www.Somanuals.com. All Manuals Search And Download.
MYRICA P42-1A / P42-2 / P50-2
Cleaning
●
●
●
●
●
●
Remove the power plug before cleaning the device.
Do not clean any interior parts yourself, leave this job to a service technician.
Do not use any cleaning agents that contain abrasives or may corrode plastic.
Ensure that no liquid will run into the system.
Ensure that the ventilation areas of the device are free.
The display surface of the device is sensitive to pressure and scratches. Clean it only using a
soft, slightly moistened cloth.
Wipe the device casing with a dry cloth. If the monitor is particularly dirty, use a cloth which has been
moistened in mild domestic detergent and then carefully wrung out.
Transport
●
Transport the device with care and only in its original packaging or another corresponding
packaging to protect it from knocks and jolts.
●
Never drop the device (danger of glass breakage).
Power cable
To guarantee safe operation, use the cable supplied. Use the following guidelines if it is necessary to
replace the original cable set.
●
●
The female/male receptacles of the cord set must meet IEC60320/CEE-22 requirements.
The cable has to be HAR-certified or VDE-certified. The mark HAR or VDE will appear on the
outer sheath.
●
●
For devices which are mounted on a desk or table, type SVT or SJT cable sets may be used.
For devices which sit on the floor, only SJT type cable sets may be used.
The cable set must be selected according to the rated current for your device.
CE marking
The shipped version of this device complies with the requirements of the EEC directives
89/336/EEC "Electromagnetic compatibility" and 73/23/EEC "Low voltage directive".
A26361-K1040-Z120-1-M119, edition 3
Download from Www.Somanuals.com. All Manuals Search And Download.
MYRICA P42-1A / P42-2 / P50-2
Disposal and recycling
This device has been manufactured to the highest possible degree from materials which can be
recycled or disposed of in a manner that is not environmentally damaging. The device may be taken
back after use to be recycled, provided that it is returned in a condition that is the result of normal
use. Any components not reclaimed will be disposed of in an environmentally acceptable manner.
If you have questions on disposal, please contact your point of sale, our Help Desk or obtain
information at: www.fujitsu-siemens.com/recycling
Preparing for use
Unpacking and checking the delivery
The display surface of the device is sensitive to pressure and scratches. Always hold the
device by the casing!
!
►
►
►
Unpack all the individual parts.
Check the delivery for damage incurred during transportation.
Check whether the delivery agrees with the details in the delivery note.
The complete device package includes:
–
–
–
–
–
–
–
–
one plasma TV
a foot with mounting screws
one power cable
one remote control
two batteries type AAA
one Warranty Booklet
one "Getting Started" manual (two volumes)
this Operating Manual (two volumes)
Should you discover that the delivery does not correspond to the delivery note, notify your local sales
outlet immediately.
We recommend that you keep the original packaging material. Keep it for future
transportation.
i
English - 5
Download from Www.Somanuals.com. All Manuals Search And Download.
MYRICA P42-1A / P42-2 / P50-2
Preparing remove control
Inserting batteries
►
►
►
Open the back cover of the remote control by
sliding it in the direction of the arrow.
Place the batteries supplied in the battery
compartment. Ensure correct polarity.
Close the battery compartment by sliding the
cover back on until you hear and feel it click
into place.
Remove the batteries when not using the remote control for longer periods.
Handle the remote control with care. Do not drop the remote control on the floor.
Do not expose the remote control to moisture, direct sunlight or high temperatures.
i
Replacing batteries
►
When the batteries are used up (indicator no longer lights up), replace them with two batteries
of the same type (type AAA).
Do not throw batteries or accumulators into the household waste. Batteries or
accumulators must be disposed of in accordance with local regulations concerning special
waste.
i
A26361-K1040-Z120-1-M119, edition 3
Download from Www.Somanuals.com. All Manuals Search And Download.
MYRICA P42-1A / P42-2 / P50-2
Installing plasma TV
Before you install your plasma TV, you must mount the foot on the device.
The foot is shown as an example in the following illustrations. The delivered foot may differ
from the illustration.
i
►
Lay the plasma TV on a smooth, clean work surface with the front facing downward.
Make sure that no objects are lying on the work surface, as otherwise the frame or display
surface could be damaged.
!
Recesses for mounting the foot are provided
on the left and right on the back of the
device.
►
Turn the foot so that the two shafts
point toward the recesses and the
wider section of the foot is facing
downward.
►
Push the shafts of the foot as far as
possible into the recesses.
Two holes are provided on the left and right
in the back panel of the device.
English - 7
Download from Www.Somanuals.com. All Manuals Search And Download.
MYRICA P42-1A / P42-2 / P50-2
►
Screw on the shafts of the foot through
the holes on the device.
Use the screws provided for this
purpose.
You can now place the plasma TV in the
upright position.
The device may not be placed on the floor.
A26361-K1040-Z120-1-M119, edition 3
Download from Www.Somanuals.com. All Manuals Search And Download.
MYRICA P42-1A / P42-2 / P50-2
Ventilation
To ensure sufficient ventilation, the intake and exhaust air openings of the device must
never be blocked.
!
>10 cm
>20 cm
>20 cm
>10 cm
>10 cm
>10 cm
When installing the TV in niches, maintain the minimum distance for sufficient ventilation of the
device: 10 cm from the side and back, 20 cm from the top.
English - 9
Download from Www.Somanuals.com. All Manuals Search And Download.
MYRICA P42-1A / P42-2 / P50-2
Connections on plasma TV
Observe the safety precautions in the "Important notes" chapter in this operating manual.
!
Do not cover the ventilation openings of the monitor.
Never open the housing of the power supply unit. There is extreme danger from an
electrical shock with the housing open. There are no components requiring cleaning or
repairs in the interior.
5
10
12
5
1
2
3
4
6
7
8
9
11
13
14
1 = RS-232 port
2 = DVI port
3 = AUDIO ports (LINE)
4 = PC-IN port (VGA)
8 = SCART2 port (Full)
9 = S-VIDEO port
10 = AV ports (OUT)
11 = AV ports (IN)
5 = COMPONENT ports (2x)
6 = Loudspeaker ports
7 = SCART1 port (Half)
12 = ON/OFF switch
13 = Antenna port
14 = Power connector
The following devices can be connected to this plasma TV:
RS-232
(black)
Serial port
For customer service, e.g. for updating the firmware
DVI IN
(white)
Connection for digital video input signals
e.g. a PC with a digital output (DVI-D) or for HDTV devices
AUDIO IN
white (left)
red (right)
Connection for audio input signals (LINE IN)
e.g. for a PC or for HDTV devices
A26361-K1040-Z120-1-M119, edition 3
Download from Www.Somanuals.com. All Manuals Search And Download.
MYRICA P42-1A / P42-2 / P50-2
PC IN
(blue)
Connection for analogue VGA input signals
e.g. for a PC with an analogue output (D-SUB)
COMPONENT 1
COMPONENT 2
Connections for component video and audio input signals
e.g. for HDTV decoder, HDTV video recorder or HDTV player
Y - green
Pb - blue
Pr - red
AUDIO
white (left)
red (right)
SPEAKER
red/right/+
Connection terminals for external loudspeakers
black/right/-
black/left/-
red/left/+
SCART 1
(Half)
Connection for AV (CVBS) and audio input signals
e.g. for satellite receiver, DVD player, video recorder,
decoders or a gaming console
SCART 2
(Full)
Connection for AV (CVBS, RGB) and audio input signals
e.g. for satellite receiver, DVD player, video recorder,
camcorder or a gaming console
English - 11
Download from Www.Somanuals.com. All Manuals Search And Download.
MYRICA P42-1A / P42-2 / P50-2
S-VIDEO IN
AV:
Connection for S-VIDEO input signals
e.g. for DVD player, video recorder or film camera with S-
Video connection
Connections for video and audio input signals
VIDEO
yellow
e.g. for DVD player, video recorder, film camera with S-Video
connection or gaming console
AUDIO
white (left)
red (right)
TV-ANT.
antenna cable port
AC INPUT
Connector for the power cable
A26361-K1040-Z120-1-M119, edition 3
Download from Www.Somanuals.com. All Manuals Search And Download.
MYRICA P42-1A / P42-2 / P50-2
Connecting plasma TV
Connecting antenna
►
Connect an antenna cable to the antenna
connection of the plasma TV and to the TV
antenna socket.
Connecting the power supply
►
Plug the power cable supplied into the power
connector of the LCD TV.
You will find the power connector on the back of the
plasma TV.
►
Connect the connector of the power cable
supplied into a properly earthed mains outlet and
ensure a secure connection.
English - 13
Download from Www.Somanuals.com. All Manuals Search And Download.
MYRICA P42-1A / P42-2 / P50-2
Switching plasma TV on/off
►
Press the ON/OFF switch at the left on the back of
the plasma TV.
Switching plasma TV on/into standby mode
►
Press the Standby button at the right on the
underside of the plasma TV.
From the indicator at the lower right on the front of the plasma TV you can recognise whether the
device is in operation, in the standby mode or switched off.
Green
Red
=
=
=
The device is switched on.
The device is in standby mode.
The device is switched off.
Dark
A26361-K1040-Z120-1-M119, edition 3
Download from Www.Somanuals.com. All Manuals Search And Download.
MYRICA P42-1A / P42-2 / P50-2
Setting language of the OSD menu
After switching on the device, set the language of the OSD (On Screen Display) menu according to
your needs. English is the set as the default setting. If you want to use a different language, change
this setting with the OSD menu.
►
►
►
►
►
Switch the plasma TV on with the ON/OFF switch.
Press the POWER button.
Press the MENU button to open the OSD menu.
Choose the Setup menu item using the
button.
Press the MENU button to activate the menu item.
►
►
►
►
►
►
Choose the Advanced menu item using the
button.
Press the MENU button to activate the menu item.
Choose the Language menu item using the
button.
Press the MENU button to activate the menu item.
Select the language to be shown in the OSD menu with the buttons
/
.
Press the Menu button. The OSD menu will be changed over to the selected language.
Carrying out programme search
A programme search must be carried out to put the plasma TV into operation. Use the supplied
remote control.
►
►
Switch the plasma TV on with the ON/OFF switch.
Press the POWER button.
First the signal source must be set to the TV mode.
►
►
►
Press the SOURCE button.
Choose the TV option using the
button.
Press the MENU button to activate the menu item.
Then you automatically start the programme search.
►
►
Press the MENU button to open the OSD menu.
Choose the TV menu item using the button.
English - 15
Download from Www.Somanuals.com. All Manuals Search And Download.
MYRICA P42-1A / P42-2 / P50-2
►
Press the MENU button to activate the menu item.
►
►
►
►
Select the Auto Scan menu item using the
button.
Press the MENU button to activate the menu item.
Select your country with the
button.
Press the MENU button to start the programme search.
Wait until the programme search is completed. Then the device shows the first programme found.
The programmes will be entered in the programme list in the order in which they are found.
i
Adjusting programme settings
After the programme search, you can change various programme settings later, e.g. the order of the
programmes in the programme list, the programme names or the frequency of a channel. The
following sections contain a description of how to change the settings.
►
►
►
►
►
Press the MENU button to open the OSD menu.
Choose the TV menu item using the button.
Press the MENU button to activate the menu item.
Choose the Edit menu item using the button.
Press the MENU button to activate the menu item.
The programme list will be displayed with the first 8 programmes found. If a programme name was
detected during the programme search, it will be displayed.
A26361-K1040-Z120-1-M119, edition 3
Download from Www.Somanuals.com. All Manuals Search And Download.
MYRICA P42-1A / P42-2 / P50-2
Arranging programmes
With the OSD menu you can rearrange the order of the programmes according to your personal
preferences.
Moving programme
►
►
►
►
Select the programme you want to move with the buttons
/
.
Press the INSERT button (yellow) to mark the programme to be moved.
Select the position at which you want to insert the programme with the buttons
/
.
Press the INSERT button (yellow). The programme will be inserted at the selected position.
Swapping position of two programmes
►
►
►
►
Select the programme you want to move with the buttons
/
.
Press the REPLACE button (blue) to mark the programme to be swapped.
Mark the programme with which the programme is to be swapped with the buttons
Press the REPLACE button (blue). The selected programmes swap their positions.
/
.
Changing programme properties
You can change the following properties of a programme:
●
●
●
●
●
●
Change the programme name displayed in the programme list
Set the channel of a programme
Select or automatically assign a different TV standard
Select the sound standard
"Hide" a programme in the programme list
Select a programme as a favourite
All changes are stored automatically.
i
Changing programme name
Five characters are available for the programme name.
►
Select the programme for which you want to set the name with the buttons
/
.
►
►
Mark the position for the character you want to change under Name with the buttons
Select the desired character at this position with the buttons
/
.
/
.
Repeat this procedure until you have entered the desired programme name.
English - 17
Download from Www.Somanuals.com. All Manuals Search And Download.
MYRICA P42-1A / P42-2 / P50-2
Setting channel of a programme
This function is used when a programme is transmitted on a new station frequency.
►
Select the programme for which you want to set another channel with the buttons
/
.
►
►
Mark the property CH with the buttons
/
/
.
Select the desired channel with the
buttons.
Selecting TV standard
►
Select the programme for which you want to set the TV standard with the buttons
/
.
►
►
Mark the property Picture with the buttons
/
.
Select the desired TV standard with the buttons
/
or assign the suitable TV standard
(Pal, Secam, Auto) automatically.
Selecting sound standard
►
Select the programme for which you want to set the sound standard with the buttons
.
/
►
►
Mark the property Sound with the buttons
/
.
Select the desired sound standard (B/G, D/H, L, I, Auto) with the buttons
/
.
Hiding programme in programme list
If you want to hide a programme in the programme list (SKIP=Yes), the programme is skipped when
you change the programmes with the buttons
/
.
►
►
Select the programme you want to hide in the programme list with the buttons
/
.
Press the SKIP button (green). The selected programme is hidden in the programme list.
Selecting programme as favourite
In the TV mode it is possible to change directly to programmes marked as favourites by pressing the
FAVORITE button.
►
Select the program you want to select as a favourite with the buttons
/
.
►
►
Mark the property FAV with the buttons
Select the value Yes with the buttons
/
.
/
.
A26361-K1040-Z120-1-M119, edition 3
Download from Www.Somanuals.com. All Manuals Search And Download.
MYRICA P42-1A / P42-2 / P50-2
Deleting program
►
►
Select the programme you want to delete with the buttons
/
.
Press the ERASE button (red). The selected programme is deleted from the programme list.
Selecting signal source
Selecting signal source for main display
►
►
►
Press the SOURCE button in the upper section of the remote control.
Choose the signal source you require using the
Press the MENU button to activate your selection.
button.
Selecting signal source for PIP display
►
►
►
►
Press the ON/OFF button to activate the PIP mode.
Press the SOURCE button in the lower section of the remote control (in the PIP field).
Choose the signal source you require using the
Press the MENU button to activate your selection.
button.
Changing programme
►
►
Press the
Press the
button to change to the next programme in the programme list.
button to change to the previous programme in the programme list.
English - 19
Download from Www.Somanuals.com. All Manuals Search And Download.
MYRICA P42-1A / P42-2 / P50-2
Operation
Controls are provided on the device and the remote control for operating the plasma TV.
Operating elements on the device
The operating controls of the plasma TV are located in the underside of the device. With these
buttons you can operate the basic functions of the plasma TV.
1 = INPUT SELECT button (SOURCE)
for selecting the video input source
2 = VOLUME buttons (volume)
3 = ON/OFF switch for the standby mode
4 = Indicator
5 = Infrared receiver
The VOLUME S button opens the menu for
setting the volume.
With the VOLUME T button you can
change the programme in the TV mode.
A26361-K1040-Z120-1-M119, edition 3
Download from Www.Somanuals.com. All Manuals Search And Download.
MYRICA P42-1A / P42-2 / P50-2
Changing the device settings with the buttons of the control
panel
With the buttons on the control panel, you can make the following settings directly:
Selecting picture signal source
►
►
►
Press the INPUT SELECT button. A list of the signal sources is displayed.
Choose the signal source you require using the VOLUME S/T buttons.
Press the INPUT SELECT button to activate the signal source.
Adjusting the volume
►
►
Press the VOLUME S button to open the volume menu.
Set the volume as required with the VOLUME S/T buttons.
The volume menu automatically disappears again after a short time.
Changing programme
►
►
Press the VOLUME T button to prepare changing.
Change to the next or previous programme in the programme list with the buttons
VOLUME S/T.
English - 21
Download from Www.Somanuals.com. All Manuals Search And Download.
MYRICA P42-1A / P42-2 / P50-2
Remote control
1 = POWER - switches the device on or into
the standby mode.
2 = INFO - information
You display the current settings with this
button.
3
1
2
4
5
3 = MUTE - switches the sound on and off.
6
4 = PICTURE
With this button you select the picture mode.
7
8
9
5 = V.SIZE
With this button you select the picture format.
10
11
12
6 = SOURCE
With this button you select the signal source.
13
7 = SOUND
With this function you activate the sound
mode.
14
15
8 = S.MODE - You select the audio channel
with this button.
16
18
17
9 = STILL
19
With this button you stop the displayed picture
(still image) or switch back into the normal
playback mode again.
10 = DIGEST - With this button you display
the programme overview of all channels.
20
11 = Pre.PR - Changes back to the
programme previously set
12 = SLEEP - Sleep timer
By pressing this button several times, you set
the time after which the device is
automatically switched off.
13 = TEXT - Switches Teletext on or off
14 = EXIT - Closes the submenu or the OSD
menu
15 = PR S - Changes the main display to the
next programme in the programme list
16 = MENU - Opens the OSD menu
17 = VOL W - Decrease volume
18 = VOL X - Increase volume
19 = PR T - Changes the main display to the
previous programme in the programme list
20 = 0 - 9
With this button you select the programme
directly.
A26361-K1040-Z120-1-M119, edition 3
Download from Www.Somanuals.com. All Manuals Search And Download.
MYRICA P42-1A / P42-2 / P50-2
Teletext
With button 13 you switch Teletext on or off.
With the buttons 21, 23, 24 and 25 you
navigate in the Teletext function.
Buttons for editing programme
list
The detailed description of editing the
programme list is provided under "Adjusting
21 = ERASE (red) - Deletes the selected
programme from the programme list
13
23 = SKIP (green) - The marked programme
is skipped when changing programmes with
the buttons PR S and PR T
24 = INSERT (yellow) - Moves programme
25 = REPLACE (blue) - Exchanges
22 = FAVORITE - Switches over to the
programme set as a favourite.
26 = No function
PIP (Picture in Picture)
21
22
25
27 = ON/OFF - Activates the PIP mode
28 = SOURCE
Press this button to select the signal source
for the PIP mode.
23
24
29 = SIZE
26
Press this button to select the picture format
for the PIP mode.
27
28
30
31
34
30 = POSITION
Press this button to change the position of the
PIP window.
29
32
31 = SWAP - The displays of the main and the
PIP window are exchanged.
33
32 = PR+ - Changes to the next programme of
the programme list in the PIP window
33 = PR- - Changes to the previous
programme of the programme list in the PIP
window
34 = POP - Main display and PIP window are
shown in the same size next to each other
English - 23
Download from Www.Somanuals.com. All Manuals Search And Download.
MYRICA P42-1A / P42-2 / P50-2
Changing device settings with remote control
You can open and operate the integrated OSD (On Screen Display) menu with the remote control.
To set the OSD menu, perform the following steps:
►
►
►
Press the MENU button to open the OSD menu.
Mark the desired menu item with the buttons.
Press the MENU button to activate a menu item.
/
In the individual menus, the buttons available to you in each case are shown in the footer.
►
►
►
Mark the option you want to change.
Set the desired value or activate the desired function.
Press the EXIT button to return to the main menu from a submenu or to exit the OSD menu.
All changes are stored automatically.
Description of menus
The OSD menu is available in different languages. The English menu names are used in
the following description (default setting).
i
Different menus and different options are available to you depending on the set signal
source. The menus and options not available are not shown in the OSD menu.
The following main menus are available to you in the OSD menu:
Image
Here you set the picture mode, the colour temperature and the picture format.
Sound
Here you set the sound of your plasma TV.
Tools
Here you set the advanced settings (transparency of the OSD menu, picture in picture
mode, child lock etc.).
Time
Here you set the various time functions.
TV
Here you start the automatic programme search and adjust the programme settings to
meet your needs.
A26361-K1040-Z120-1-M119, edition 3
Download from Www.Somanuals.com. All Manuals Search And Download.
MYRICA P42-1A / P42-2 / P50-2
PICTURE menu - picture settings
►
►
►
Press the MENU button to open the OSD menu.
Mark the PICTURE menu item with the
Press the MENU button to activate the menu item.
/
buttons.
The buttons available to you for setting the options are shown in the menu footer.
Mode
With this function you set the picture mode.
The contrast, brightness, colour and focus of the picture are set to optimum
values depending on the picture mode.
Possible values: Standard, Vivid, Mild, User.
Temperature
Video NR
With this button you set the colour temperature.
Possible values: Cool2, Cool1, Normal, Warm1, Warm2.
With this function you switch the picture correction (Noise Reduction) on or
off.
Possible values: On, Off
Screen form
With this function you set the picture format.
Possible values: 16:9, PANORAMA, ZOOM1, ZOOM2, 4:3.
Geometry
With these functions you set the position and the synchronisation of the
picture display.
(in PC mode only)
To set the picture display, first use the Auto function and correct the picture
display and, if necessary, then with the other functions.
These functions are only available when PC is selected as the signal
source.
H Position
With this function you set the horizontal picture
position.
V Position
Phase
With this function you set the vertical picture position.
With this function you fine-tune your display to
eliminate picture interference.
Auto
With this function you optimally set the picture display
automatically.
English - 25
Download from Www.Somanuals.com. All Manuals Search And Download.
MYRICA P42-1A / P42-2 / P50-2
SOUND menu - sound settings
►
►
►
Press the MENU button to open the OSD menu.
Mark the SOUND menu item with the buttons.
Press the MENU button to activate the menu item.
/
The buttons available to you for setting the options are shown in the menu footer.
Balance
With this function you set the balance between the left and the right
loudspeaker.
Sound-Mode
With this function you activate the sound mode.
The bass level and frequency of the sound are automatically set to
optimum values depending on the sound mode.
Possible values: Standard, Movie, Music, User.
With this function you switch the Surround sound mode on or off.
Possible values: On, Off
Spatial Effect
AVC
(Automatic Volume Control)
With this function you switch the automatic volume control on or off.
Possible values: On, Off
INTERNAL
MTS
With this function you change from the internal loudspeakers to the external
ones and vice versa.
Possible values: On, Off
(Multi Tone System)
With this function you set the audio channel.
Possible values: Mono, Stereo, Language A, Language B, Language AB.
A26361-K1040-Z120-1-M119, edition 3
Download from Www.Somanuals.com. All Manuals Search And Download.
MYRICA P42-1A / P42-2 / P50-2
SETUP menu - advanced settings
►
►
►
Press the MENU button to open the OSD menu.
Mark the SETUP menu item with the buttons.
Press the MENU button to activate the menu item.
/
The buttons available to you for setting the options are shown in the menu footer.
Translucent
PIP
With this function you set the transparency of the OSD menu
Possible values: Off, 1 - 7
(Picture In Picture)
With this function you switch the PIP mode on or off.
Possible values: On, Off
When the PIP mode is activated, the following options are available:
Size
Here you set the picture format for the PIP display.
Resource
Here you set which signal source is displayed in the
PIP display.
Picture Swap
Position
With this function you exchange the signal sources of
the main display and the PIP display.
Here you set the position of the PIP display.
A description of the PIP mode is also provided under "PIP mode (Picture in
English - 27
Download from Www.Somanuals.com. All Manuals Search And Download.
MYRICA P42-1A / P42-2 / P50-2
Advanced
Here you configure the advanced settings.
ID
Here you set an ID number for service purposes.
Possible values: 0 - 99
Burn Protect
With this function you can partially prevent still
images from burning in.
Possible values: On, Off
Warning:
Avoid still images on the screen for longer periods,
e.g. still images from videos, sender label etc.
(maximum of 1 hour).
Burn Clear
Blue Back
Language
With this function you can regenerate burned-in
areas of the screen in some cases.
Possible values: On, Off
With this function the screen background is shown in
blue when there is no input signal.
Possible values: On, Off
With this function you set the language of the OSD
menu.
Possible values: English, German, French, Spanish,
Italian, Portuguese *), Dutch *)
*) not with MYRICA P42-1A
Setting the child lock With this function you switch the child lock on or off.
When the child lock is activated, it is not possible to
operate the plasma TV with the operating buttons on
the device.
Possible values: On, Off
A26361-K1040-Z120-1-M119, edition 3
Download from Www.Somanuals.com. All Manuals Search And Download.
MYRICA P42-1A / P42-2 / P50-2
TIME menu - time settings
►
►
►
Press the MENU button to open the OSD menu.
Mark the Time menu item with the buttons.
Press the MENU button to activate the menu item.
/
The buttons available to you for setting the options are shown in the menu footer.
MYRICA P42-1A
MYRICA P42-2 / P50-2
Time Set
On Time
With this button you set the current time.
Format: Hour:Minute
With MYRICA P42-1A: AM (before 12:00 noon); PM (after 12:00 noon)
With this function you set the time at which the device is to be automatically
switched on.
Format: Hour:Minute
To activate the function, set the selection to On after setting the time.
To deactivate the function, set the selection to Off after setting the time.
On Channel
With this function you set the program to be displayed after automatic
switch-on.
On Volume
Off Time
With this function you set the volume to be used after automatic switch-on.
With this function you set the time at which the device is to be switched off
automatically.
Format: Hour:Minute
To activate the function, set the selection to On after setting the time.
To deactivate the function, set the selection to Off after setting the time.
Sleep
With this function you set the number of minutes after which the device is
automatically switched off.
Possible values: Off, 10, 20, 30, 60, 90, 120, 180
English - 29
Download from Www.Somanuals.com. All Manuals Search And Download.
MYRICA P42-1A / P42-2 / P50-2
TV menu - programme settings
►
►
►
Press the MENU button to open the OSD menu.
Mark the TV menu item with the buttons.
Press the MENU button to activate the menu item.
/
The buttons available to you for setting the options are shown in the menu footer.
Auto Scan
With this function you start the automatic programme search.
The automatic programme search must be carried out when you want to
use your plasma TV for the first time following installation.
The programmes will be entered in the programme list in the order in
which they are found. However, you can change the order of the
programmes later.
Manual Scan
With this function you search for a new programme starting from the
frequency of the current channel. When the next programme has been
found, you can select whether or not the programme found is to be added
to the programme list.
To start the search manually, press the button.
To add the programme found to the programme list, press the MENU
button. If you want to search for additional programmes, you must restart
the manual search.
To continue the search, press the button.
Fine Tune
Edit
With this function you manually set the frequency of an individual
channel.
The set values remain unchanged until an update is carried out.
With this function you set the order of the programmes in the programme
list and the properties of the individual programme.
A detailed description is provided under "Adjusting programme settings".
A26361-K1040-Z120-1-M119, edition 3
Download from Www.Somanuals.com. All Manuals Search And Download.
MYRICA P42-1A / P42-2 / P50-2
Display modes
Main display mode
►
Press the SOURCE button on the remote control or the INPUT SELECT button on the
underside of the plasma TV to select the source from which the signal for the main display is to
come.
For the main display you can select one of the following signal sources:
●
●
●
●
●
●
●
●
TV
SCART1
SCART2
S-VIDEO or CVBS (AV)
Component 1 (YPbPr)
Component 2 (YPbPr)
VGA (PC)
DVI
By pressing the INFO button you display the designation of the currently selected signal sources in
the upper left corner of the screen.
English - 31
Download from Www.Somanuals.com. All Manuals Search And Download.
MYRICA P42-1A / P42-2 / P50-2
PIP mode (Picture in Picture)
The plasma TV can also display a sub-video signal in addition to the main video signal. The sub-
video signal is shown as a "PIP display" in a window on the main display.
The following buttons of the remote control are available for setting the PIP mode.
►
►
Press the ON/OFF button to activate the PIP mode.
Press the SOURCE button to select the source from which the signal for the PIP display is to
come.
►
►
►
Press the SIZE button to set the size of the PIP display.
Press the POSITION button to set the position of the PIP display.
Press the SWAP button to exchange the size and position of the main display with those of the
PIP display.
►
►
Press the POP button to display the main display and the PIP display in the same size next to
each other.
If a TV signal is displayed in the PIP display, you change to the next programme in the
programme list with the PR+ button, and to the previous programme in the programme list with
the PR- button.
Depending on which source the signal for the main display comes from, you can use certain sources
for the signal of the PIP display.
The following combination options are available to you:
Signal
Main display
sources
TV
AV
SV
SCART 1 SCART 2
VGA
DVI
YPbPr
TV
AV
SV
-
-
-
-
-
SCART
1
-
SCART
2
-
-
-
-
-
-
-
-
-
VGA
DVI
YPbPr
A26361-K1040-Z120-1-M119, edition 3
Download from Www.Somanuals.com. All Manuals Search And Download.
MYRICA P42-1A / P42-2 / P50-2
Technical data
MYRICA P42-1A
MYRICA P42-2
MYRICA P50-2
Screen:
Size (diagonal)
Visible picture (HxV):
42'' (107 cm)
42'' (107 cm)
50'' (126.9 cm)
934 mm x 532.2 mm
852 x 480
934 mm x 532.2 mm
1024 x 768
1,107 mm x 622 mm
1366 x 768, WXGA
Number of pixels
(HxV):
Pixel spacing:
Brightness:
0.912 mm x 0.693 mm 0.912 mm x 0.693 mm 0.81 mm x 0.81 mm
typical: 1000 cd/m²
typical: 3000:1
typical: 900 cd/m²
typical: 2500:1
typical > 160°
16.7 mio
typical: 1000 cd/m²
typical: 3000:1
Contrast:
Viewing angle:
Number of colours:
Picture format:
Horizontal frequency:
Refresh rate:
16:9
31.15 - 69 kHz
56 - 85 Hz
31.15 - 82 kHz
56 - 75 Hz (digital)
31.15 - 82 kHz
56 - 75 Hz (digital)
56 - 90 Hz (analogue) 56 - 90 Hz (analogue)
Maximal resolution:
1024 x 768/ 75 Hz
(analogue/digital)
1280 x 1024 / 60 Hz
(analogue/digital)
1280 x 1024 / 60 Hz
(analogue/digital)
Synchronisation:
Separate:
H / V TTL, P or N
H / V TTL, P or N
Composite:
Green synchronisation:
Composite 0.3 Vp-p, negative
Video 0.7 Vp-p, positive
Video signal:
Colour system:
Sound system:
Video format:
DTV:
0,7 Vp-p / 75 Ohm
PAL / SECAM
BG, DK, I, L
CVBS, S-VHS
YPbPr
Composite
Separate
YUV
Video / Mode
SCART 1:
0.7 Vp-p / 720 p @ 1080 i
Video input/output
Audio input/output
1.0 Vp-p @ 75 Ohm
0.5 Vms
English - 33
Download from Www.Somanuals.com. All Manuals Search And Download.
MYRICA P42-1A / P42-2 / P50-2
MYRICA P42-1A
MYRICA P42-2
TMDS ( DVI-D)
100 - 240 V (50/60 Hz) 100 - 240 V (50/60 Hz) 100 - 240 V (50/60 Hz)
MYRICA P50-2
DVI:
Power supply (AC):
2 A / 240 V
4.6 A / 100 V
2 A / 240 V
4.6 A / 100 V
2 A / 240 V
5 A / 100 V
Power consumption:
typical: 300 W
Standby < 5 W
typical: 385 W
Standby < 5 W
typical: 500 W
Standby < 5 W
Dimensions:
Width x Depth x Height: 1037 x 110 x 635 mm
(without foot)
1037 x 110 x 635 mm
(without foot)
1208 x 110 x 723 mm
(without foot)
1037 x 240 x 703 mm
(with foot)
1037 x 240 x 703 mm
(with foot)
1208 x 360 x 775 mm
(with foot)
Weight:
approx. 41 kg
approx. 41 kg
approx. 54 kg
packed approx. 46 kg
packed approx. 46 kg
packed approx. 60 kg
Audio:
Audio input:
DVI / PC, Video 1,
S-Video,
RCA connection (L, R) 0.5 Vms
Component1/2,
(SCART 1, SCART 2)
Audio output:
Loudspeaker output:
RS-232:
0.5 Vms at 1 kHz
approx. 2 x 8 W (8 Ohm)
For Service only
Standard certificate:
Security:
TÜV-GS ,CE
EMC:
TV mode: EN55020 class B, EN 55013, EN 61000-3-2/-3 (see CE)
PC mode: EN55022 class B, EN 55024, EN 61000-3-2/-3 (see CE)
Environment:
Condensation must be avoided.
Temperature:
Operating: +15 ° to +35 ° C
Storage: -15 ° to + 60 ° C
Change: 1.5 ° C/minute maximum
Operation: 20 - 85 % without condensation
Storage: 20 - 85 % without condensation
Operation : 800 - 1,114 hPa (height: 0 - 2000 m)
Storage : 600 - 1,114 hPa (height: 0 - 4500 m)
Manual, remote control, battery
Humidity:
Pressure:
Accessories:
Power supply cable: 1.8 m
Foot with mounting screws
A26361-K1040-Z120-1-M119, edition 3
Download from Www.Somanuals.com. All Manuals Search And Download.
MYRICA P42-1A / P42-2 / P50-2
VESA-DDC-compatible VGA interface
Your plasma TV is equipped with a VESA-DDC-compatible VGA interface and a DVI-D interface.
VESA-DDC (Video Electronics Standard Association, Display Data Channel) is used as the
communications interface between the plasma TV and the computer. If your computer is equipped
with a VESA-DDC-compatible VGA interface, it can automatically read the data for ensuring optimum
operation from your plasma TV and select the appropriate settings.
Preset operating modes (PC)
The following are the most frequently used of the preset operating modes:
Resolution
640 x 350
Refresh rate
70 Hz
640 x 480
60 Hz, 72 Hz, 75 Hz
56 Hz, 60 Hz, 72 Hz
60 Hz, 70 Hz, 75 Hz
60 Hz, 75 Hz
800 x 600
1024 x 768
1280 x 720 *)
1280 x 768 *)
1280 x 1024 *)
60 Hz, 75 Hz
60 Hz
*) not with MYRICA P42-1A
Power consumption
To save energy when the device is temporarily not in use, the plasma TV can be switched into the
standby mode with the remote control (POWER button) or the STANDBY button.
Switched on
Standby mode
lights red
Power indicator
Function
lights green
Device operates normally
normal < 300 W (P42-1A)
normal < 385 W (P42-2)
normal < 500 W (P50-2)
the screen is dark
Power consumption
reduced to < 5 W (P42-1A)
reduced to < 5 W (P42-2)
reduced to < 5 W (P50-2)
If the device is switched into the standby mode, a power consumption of up to 5 W is
maintained to enable operation with the remote control.
i
To completely switch off the power consumption, switch off the device with the ON/OFF
English - 35
Download from Www.Somanuals.com. All Manuals Search And Download.
MYRICA P42-1A / P42-2 / P50-2
PC Analogue (D-SUB)
1
5
6
10
11
15
Pin
1
Meaning
Video input red
Video input green
Video input blue
Earth
Pin
Meaning
+5 V (DDC)
Sync. earth
Earth
9
2
10
11
12
13
14
15
3
4
DDC-Data
H. sync
5
Earth
6
Red video earth
Green video earth
Blue video earth
V. sync
7
DDC Clock
8
PC Digital (DVI-D)
1
9
17
Pin
1
Meaning
TMDS Data2-
TMDS Data2+
Pin
Meaning
Pin
Meaning
9
TMDS Data1-
17 TMDS Data0-
2
10 TMDS Data1+
18 TMDS Data0+
3
TMDS Data 2/4
Shield
11 TMDS Data 1/3
Shield
19 TMDS Data 0/5 Shield
4
5
6
7
8
not connected
not connected
DDC Clock
12 not connected
13 not connected
14 +5V Power
15 Earth
20 not connected
21 not connected
22 TMDS Clock Shield
23 TMDS Clock-
24 TMDS Clock+
DDC Data
Analogue Vertical
Sync
16 Hot Plug Detect
A26361-K1040-Z120-1-M119, edition 3
Download from Www.Somanuals.com. All Manuals Search And Download.
MYRICA P42-1A / P42-2 / P50-2
SCART (Half/Full)
Pin Meaning
Pin Meaning
Pin Meaning
1
2
3
4
5
6
7
Sound (R) output
Sound (R) input
Sound (L) output
Sound signal earth
Blue earth *)
8
9
Changeover voltage
Green earth *)
15 Red *)
16 Blanking *)
10 Not assigned
11 Green *)
17 Video output earth
18 Video input earth
19 Video output **)
20 Video input
12 Not assigned
13 Red earth *)
12 Blanking earth
Sound (L) input
Blue *)
21 Shield earth
*) Not used with SCART (Half)
**) TV-Out for SCART (Half); current picture signal for SCART (Full)
S-Video
Pin
1
Meaning
GND
2
GND
3
Luminance (Y)
Chrominance (C)
4
English - 37
Download from Www.Somanuals.com. All Manuals Search And Download.
MYRICA P42-1A / P42-2 / P50-2
Colour and transmission system by country
Country
Albania
TV
Colour
PAL
Stereo
Subtitles
B/G
Austria
B/G
PAL
FM-FM
Teletext
Azores
B
PAL
Bahrain
B
PAL
Belgium
B/G
PAL
Nicam
Teletext
Bulgaria
Canary Islands
Croatia
D
SECAM
PAL
B
B/H
PAL
Cyprus
B
PAL
Czech Republic
Denmark
Egypt
D/K
SECAM / PAL
PAL
B
Nicam
Teletext
B
B
SECAM
PAL
Faroe Islands (DK)
Finland
B/G
PAL
Nicam
Teletext
Teletext
Teletext
France
E/L
SECAM
PAL
Germany
Gibraltar
Greece
B/G
FM-FM
B
PAL
B/G
PAL
Hungary
B/G & D/K
PAL
Nicam
(Budapest
only)
Iceland
Iran
B
H
PAL
SECAM
PAL
Ireland
Israel
I
Nicam
Nicam
FM-FM
Teletext
Teletext
Teletext
B/G
B/G
B
PAL
Italy
PAL
Jordan
Kenia
PAL
B
PAL
Luxemburg
Madeira
Malta
B/G
B
PAL
Nicam
Teletext
Teletext
PAL
B/G
B
PAL
Marocco
Monaco
Netherlands
SECAM
SECAM / PAL
PAL
L/G
B/G
FM-FM
A26361-K1040-Z120-1-M119, edition 3
Download from Www.Somanuals.com. All Manuals Search And Download.
MYRICA P42-1A / P42-2 / P50-2
Nicam
Norway
B/G
PAL
Country
TV
D/K
B/G
G
Colour
PAL
Stereo
Subtitles
Teletext
Teletext
Poland
Portugal
PAL
Rumania
PAL
Russia
D/K
B
SECAM
SECAM
SECAM / PAL
PAL
Saudi Arabia
Slovakia
D/K
B/H
I
Slovenia
South Africa
Spain
PAL
B/G
B/G
B/G
B
PAL
Nicam
Nicam
FM-FM
Teletext
Teletext
Teletext
Sweden
PAL
Switzerland
Tunesia
PAL
SECAM
PAL
Turkey
B
Teletext
Teletext
United Arab Emirates
United Kingdom
B/G
I
PAL
PAL
Nicam
English - 39
Download from Www.Somanuals.com. All Manuals Search And Download.
MYRICA P42-1A / P42-2 / P50-2
Troubleshooting
Should an error occur, first check the following points. If the distortion is still not eliminated, the
plasma TV should, if possible, be checked on another signal source and/or with another data cable.
If you are unable to solve the problem, please inform our help desk.
Having this problem?
Check the following points:
No display (power indicator does not light)
►
Check whether the power cable of the
device is properly plugged in and the
ON/OFF switch on the back of the device
is switched on.
Display becomes darker
The phosphorous illumination has a limited
lifetime. If your screen display should become
too dark, it will have to be exchanged.
►
Please contact our help desk.
Permanently unlit or lit pixels
The standard of production techniques today
cannot guarantee an absolutely fault-free
screen display. A few isolated constant lit or
unlit pixels may be present. The maximum
permissible number of this kind of defective
pixels is dependent on the resolution:
MYRICA P42-1A/P42-2: 6L / 10D / 10T
MYRICA P50-2: 8L / 14D / 14T
L = light, D = dark, T = total
No picture (power indicator glows orange)
The remote control does not work.
►
►
►
►
Switch on the plasma TV on the device or
with the remote control.
Check the setting of the picture signal
source.
Check whether the batteries in the remote
control are still sufficiently charged.
Make sure that the sensor for the remote
control on the plasma TV is not exposed
to strong light.
A26361-K1040-Z120-1-M119, edition 3
Download from Www.Somanuals.com. All Manuals Search And Download.
MYRICA P42-1A / P42-2 / P50-2
Troubleshooting in TV mode
Having this problem?
Check the following points:
No sound
►
►
►
Check the volume setting.
Check whether the device is muted.
No picture, only static
The picture is fuzzy.
Check that the antenna cable is correctly
connected.
Reception may be poor.
►
Check that the antenna cable is correctly
connected.
Reception may be poor.
The picture has dark interference lines and a
strong humming sound can be heard.
There may be an interference signal on the
antenna cable.
►
Have the installation checked.
A sheath current filter from the accessories
trade can provide a remedy.
The picture has shadows or ghost images
►
Check the antenna cable.
Use a directional antenna instead of an
omnidirectional antenna.
The picture shows interference, false colours or
line and picture shaking.
►
Check whether the plasma TV is set to
the correct TV system (PAL or SECAM).
English - 41
Download from Www.Somanuals.com. All Manuals Search And Download.
MYRICA P42-1A / P42-2 / P50-2
Troubleshooting in PC mode
Having this problem?
Message:
Check the following points:
►
Check the setting of the picture signal
source.
No Signal / Keine Eingabe
►
Check whether the antenna or data cable
is correctly connected.
Message:
The input signal (horizontal frequency and
refresh rate) at the displayed input does not
correspond to the technical plasma TV data.
Out of range
►
Adjust the video frequency range using
the computer software (see
documentation for your computer or your
graphics card).
Picture position is not correct
The plasma TV recognises an undefined mode
►
Use the OSD function Geometry/Auto to
carry out the self-adjustment of the
plasma TV.
►
Set the picture position with the OSD
menu.
These functions are only available when PC is
selected as the signal source.
Picture is shaking
►
Check whether the data cable for the
plasma TV is correctly attached to the
monitor port on the computer.
A26361-K1040-Z120-1-M119, edition 3
Download from Www.Somanuals.com. All Manuals Search And Download.
|