Getting Ready
Using the Camera
• Photography
Advanced Features
• Playback
• Movie
Settings
OWNER’S MANUAL
This manual will show you how to use
your FUJIFILM DIGITAL CAMERA
FinePix J10 / FinePix J12 correctly.
Please follow the instructions carefully.
Camera Connection
Software
Installation
Appendices
Troubleshooting
BL00710-201(1)
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT
Be sure to read this page before using the software.
4. Ownership.
NOTICE
All copyrights and other proprietary rights to Software and Documentation are
owned and retained by FUJIFILM or the third party suppliers as indicated on
or in Software or Documentation. Nothing contained herein shall be
construed, expressly or implicitly, as transferring or granting any right, license,
or title to you other than those explicitly granted under this Agreement.
5. Limited Warranty.
BEFORE OPENING THE CD-ROM PROVIDED BY FUJIFILM
Corporation, PLEASE READ THIS END USER LICENSE AGREEMENT
CAREFULLY. ONLY IF YOU AGREE WITH THIS AGREEMENT,
SHOULD YOU USE THE SOFTWARE RECORDED ON THE CD-ROM.
BY OPENING THE PACKAGE, YOU ACCEPT AND AGREE TO BE
BOUND BY THIS AGREEMENT.
FUJIFILM warrants to you that Media is free from any defect in material
and workmanship under normal use for ninety (90) days from the date
of your receipt of Media. Should Media not meet the foregoing warranty,
FUJIFILM shall replace such defective Media with other Media bearing
no defect. FUJIFILM’s entire liability and your sole and exclusive
remedy with regard to any defect in Media shall be expressly limited to
such FUJIFILM’s replacement of Media as provided herein
6. DISCLAIMER OF WARRANTY.
End User License Agreement
This End User License Agreement (“Agreement”) is an agreement between
FUJIFILM Corporation (“FUJIFILM”) and you, which sets forth the terms
and conditions of the license granted for you to use the software provided
by FUJIFILM.
The CD-ROM contains third party software. In case a separate agreement
is provided by a third party supplier for its software, the provisions of such
separate agreement shall apply to the use of such third party software,
prevailing over those of this Agreement.
EXCEPT AS PROVIDED IN SECTION 5 HEREIN, FUJIFILM PROVIDES
PRODUCT “AS IS” AND WITHOUT WARRANTIES OF ANY KIND,
EXPRESS OR IMPLIED. FUJIFILM SHALL MAKE NO WARRANTY,
EXPRESS, IMPLIED OR STATUTORY, AS TO ANY OTHER MATTERS,
INCLUDING, BUT NOT LIMITED TO NON-INFRINGEMENT OF ANY
COPYRIGHT, PATENT, TRADE SECRET, OR ANY OTHER
PROPRIETARY RIGHTS OF ANY THIRD PARTY, MERCHANTABILITY,
OR FITNESS FOR ANY PARTICULAR PURPOSE.
1. Definitions.
(a) “Media” means the CD-ROM titled “Software for FinePix”- which is
provided to you together with this Agreement.
(b) “Software” means the software which is recorded on Media.
(c) “Documentation” means the operation manuals of Software and
other related written materials which are provided to you together
with Media.
7. LIMITATION OF LIABILITY.
IN NO EVENT SHALL FUJIFILM HAVE ANY LIABILITY FOR ANY
GENERAL, SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL,
INCIDENTAL, OR OTHER DAMAGES (INCLUDING DAMAGES FOR
LOSS OF PROFITS OR LOST SAVINGS) INCURRED FROM THE
USE OF OR INABILITY TO USE PRODUCT EVEN IF FUJIFILM HAS
BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
8. No export.
(d) “Product” means Media (including Software) and Documentation
collectively.
2. Use of Software.
FUJIFILM grants to you a nontransferable, nonexclusive license:
(a) to install one copy of Software onto one computer in binary machine
executable form;
(b) to use Software on the computer onto which Software is installed; and
(c) to make one backup copy of Software.
You acknowledge that neither Software nor any part thereof, will be
transferred, or exported to any country or used in any manner in violation
of any export control laws and regulations to which Software is subject.
9. Termination.
In case you breach any of the terms and conditions hereof, FUJIFILM
may immediately terminate this Agreement without any notice.
10. Term.
This Agreement is effective until the date when you cease to use
Software, unless earlier terminated in accordance with Section 9 hereof.
11. Obligation upon termination.
Upon termination or expiration of this Agreement, you shall, at your own
responsibility and expense, delete or destroy immediately all Software
(including its copies), Media and Documentation.
12. Governing Law.
This Agreement shall be governed by and construed in accordance with
laws of Japan.
3. Restrictions.
3.1 You shall not distribute, rent, lease or otherwise transfer all or any
part of Software, Media or Documentation to any third party without
FUJIFILM’s prior written consent. You also shall not sublicense,
assign or otherwise transfer all or any part of the rights granted to
you by FUJIFILM under this Agreement without FUJIFILM’s prior
written consent.
3.2 Except as expressly granted by FUJIFILM hereunder, you shall not
copy or reproduce all or any part of Software or Documentation.
3.3 You shall not modify, adapt or translate Software or Documentation.
You also shall not alter or remove copyright and other proprietary
notices that appear on or in Software or Documentation.
3.4 You shall not, or shall not have any third party, reverse-engineer,
decompile, or disassemble Software.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
EC Declaration of Conformity
We
Name:
Address:
FUJIFILM Electronic Imaging Europe GmbH
Benzstrasse 2
47533 Kleve, Germany
declare that the product
Product Name:
Manufacturer’s Name:
FUJIFILM DIGITAL CAMERA FinePix J10 / FinePix J12
FUJIFILM Corporation
Manufacturer’s Address: 7-3, AKASAKA 9-CHOME, MINATO-KU,
TOKYO 107-0052, JAPAN
conforms to the following Standards:
Safety:EN60950-1: 2001
EMC: EN55022: 2006 Class B
EN55024: 1998 + A1: 2001 + A2: 2003
EN61000-3-3: 1995 + A1: 2001 + A2: 2005
following the provision of the EMC Directive (2004/108/EC) and Low Voltage Directive (2006/95/EC).
Kleve, Germany
Place
February 1, 2008
Date
Signature/Managing Director
This product comes with batteries. When these are empty, you shouldn’t throw them
away but deliver them as domestic chemical refuse.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Disposal of Electric and Electronic Equipment in Private Households
Disposal of used Electrical & Electronic Equipment (Applicable in the European Union and other European countries with
separate collection systems)
This symbol on the product, or in the manual and in the warranty, and/or on its packaging indicates that this
product shall not be treated as household waste.
Instead it should be taken to an applicable collection point for the recycling of electrical and electronic
equipment.
By ensuring this product is disposed of correctly, you will help prevent potential negative consequences to
the environment and human health, which could otherwise be caused by inappropriate waste handling of this
product.
If your equipment contains easy removable batteries or accumulators please dispose these separately according to your local
requirements.
The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product,
please contact your local city office, your household waste disposal service or the shop where you have purchased the product.
In Countries outside the EU:
If you wish to discard this product, please contact your local authorities and ask for the correct way of disposal.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Warning................................................................. 2
IMPORTANT......................................................... 3
EC Declaration of Conformity................................ 4
Disposal of Electric and Electronic Equipment in
Private Households ......................................... 5
Contents................................................................ 6
About this Manual ................................................. 8
Accessories Included ............................................ 9
Camera Parts and Features................................ 10
Example of LCD Monitor Text Display ................ 11
Advanced Features — Photography
Using the Photography Functions —
Procedure of Setting ..................................... 39
Setting the Shooting Mode................................. 41
Shooting Mode ................................................... 42
e Macro (Close-up)........................................... 47
d Setting the Flash............................................. 48
* Self-Timer ...................................................... 50
j Increasing Monitor Brightness ...................... 52
Using [SHOOTING MENU] ................................ 53
Setting the [SHOOTING MENU] ................ 53
[SHOOTING MENU]........................................... 56
Changing the sensitivity setting
Getting Ready
Charging the Battery ........................................... 12
Loading the Battery............................................. 14
Loading the Memory Card................................... 16
Turning On and Off ............................................. 19
Setting the language, date, and time .......... 20
Correcting the Date and Time............................. 23
Selecting the Language ...................................... 24
([ ISO]) ................................................. 56
Changing the quality setting
([ QUALITY])........................................ 56
Adjusting exposure compensation
([ EXP. COMPENSATION])................. 58
Adjusting color balance
Using the Camera
([ WHITE BALANCE]).......................... 59
Taking pictures continuously
([ CONTINUOUS])............................... 60
Taking Pictures (AUTO Mode)............................ 25
Taking pictures with the focus and exposure
locked....................................................... 29
Adjusting the shot composition ................... 31
Viewing the Images............................................. 32
Erasing the Images/Movies............................ 36
Using the erase button ( /n).................... 36
Erasing the images using
Advanced Features — Playback
Using [PLAYBACK MENU]................................. 61
Setting the [PLAYBACK MENU] ................ 61
[PLAYBACK MENU] .......................................... 62
Setting automatic playback
([ SLIDE SHOW])................................. 62
DPOF set frame
[PLAYBACK MENU]................................. 36
([ PRINT ORDER (DPOF)]) ................. 62
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Protecting the images ([ PROTECT])...... 66
Copying the images ([ COPY])................ 67
Rotating the images
([ IMAGE ROTATE])............................. 70
Trimming the images ([ TRIMMING]) ...... 71
Appendices
System Expansion Option................................ 102
Accessories Guide ........................................... 103
Using Your Camera Correctly .......................... 105
Notes on the xD-Picture Card™, the SD Memory
Card and the Internal Memory .................... 106
Warning Displays ............................................. 107
Advanced Features — Movie
r Recording Movies.......................................... 73
Set the camera to r Movie mode.............. 73
Record movies............................................ 74
Changing movie size................................... 75
w Playing Back Movies ..................................... 76
Troubleshooting
Troubleshooting................................................ 111
Specifications ................................................. 117
Explanation of Terms ..................................... 124
FUJIFILM Digital Camera Worldwide
Settings
[
SET-UP]........................................................ 78
Using the [SET-UP] menu........................... 78
[SET-UP] menu option................................ 79
Network..................................................... 125
Usable Memory Cards
Camera Connection
You can use the xD-Picture Card, the SD Memory Card and
the SDHC Memory Card with the FinePix J10 / FinePix J12. In
this Owner’s Manual, these cards are expressed as “Memory
Card”.
Connecting to a TV ............................................. 87
Connecting Camera Directly to Printer —
PictBridge Function ....................................... 88
Software Installation
Installation on a Windows PC ............................. 92
Installation on a Mac OS X ................................. 94
Connecting to a PC............................................. 97
Using FinePixViewer................................. 100
7
Download from Www.Somanuals.com. All Manuals Search And Download.
About this Manual
Z About marks
CAUTION
This mark denotes issues that may affect the camera’s operation.
CHECK
This mark denotes points to notice in the camera’s operation.
MEMO
This mark denotes additional topics that complement the basic operating procedures.
Z Usable Memory Cards
You can use the xD-Picture Card, the SD Memory Card and the SDHC Memory Card with the FinePix J10 / FinePix J12. In
this Owner’s Manual, these cards are expressed as “Memory Card”.
Z About illustration
Up, down, left, and right are indicated by black triangles in the Owner’s Manual. Up or down is shown as n or o, and left or
right is shown as p or q.
When pressing DISP/BACK:
When pressing q:
Z About cables
The cables used for FinePix J10 / FinePix J12 are following:
• A/V cable for FinePix J10 / FinePix J12
• USB cable for FinePix J10 / FinePix J12
In this manual, these cables are expressed as “A/V cable” and “USB cable”.
Z Note
In this manual, the menu names and messages displayed on the LCD monitor of the camera or PC screen appear in square
brackets ([ ]).
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Accessories Included
Make sure that all the below accessories are included.
Note that accessories may vary depending on model.
• CD-ROM (1)
Software for FinePix
• Rechargeable Battery NP-45 (1)
• Strap (1)
• Owner’s Manual (this manual) (1)
• Notes and Cautions (1)
Attaching the strap
• Battery Charger BC-45A (1 set)
Attach the strap as shown in 1 and 2.
When attaching the strap, move the fastener to adjust the
length and slightly away from the end of the strap, as
shown in figure 1.
Wall type
Cord type
• A/V cable (1)
• USB cable (1)
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Camera Parts and Features
• Refer to the pages in parentheses for information on using the camera parts or features.
A Shutter button
B Self-timer lamp (p.51)
C Lens (Lens cover)
D Microphone
E ON/OFF button
F Flash (p.48)
G Indicator lamp (p.28)
H DISP (Display)/BACK button (p.31, 32)
I LCD monitor
J MENU/OK button
K p/e Macro button (p.47)
L Speaker
M Tripod mount
N o/* Self-timer button (p.50)
O Battery compartment
P Memory Card slot (p.16)
Q Zoom button (p.26, 33)
R w (Playback) button
S n/j Low light view button (p.52)/
Erase button (p.36)
T Strap mount
U q/d Flash button (p.48)
V ; USB socket
A/V OUT (Audio/Visual output) socket
(p.87)
W Battery cover
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Example of LCD Monitor Text Display
Z Shooting mode
A ( Self-timer (p.50)
B e Macro (close-up) (p.47)
C C Flash (p.48)
L ISO 100 Sensitivity (p.56)
M { AF warning (p.107)
N | Camera shake warning
(p.107)
D s Shooting mode (p.41)
E
Battery level indicator
O
Increasing monitor
brightness (p.52)
(p.22)
F AF frame (p.26)
G Date/Time (p.20)
P Y Internal memory (p.18)
Q S Exposure compensation
(p.58)
H 9 White balance (p.59)
I f Continuous shooting (p.60)
J iN Quality mode (p.56)
K Number of available frames
(p.122)
Z Playback mode
A w Playback mode (p.32)
B u DPOF (p.62)
C F Protection (p.66)
D Frame number (p.81)
A
D
E
B
C
E
Present (p.32)
FinePix J10 / FinePix J12 has internal memory that can store images without Memory Card. Y appears on the LCD monitor when
the internal memory is active.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Charging the Battery
The battery is not fully charged at shipment and must be
fully charged before being used.
1 Load the battery into the battery charger
BC-45A.
Z Compatible battery
Set the battery correctly as indicated by the polarity icon.
Rechargeable Battery NP-45 (1)
<Wall type>
Rechargeable
Battery NP-45
Battery Charger
BC-45A
Terminals
Indicator
<Cord type>
CAUTION
• The battery is not fully charged at shipment and must be
fully charged before being used.
• Do not stick labels onto the battery as this could cause
the battery to become jammed inside the camera.
• Any contact between the battery terminals could cause
the battery to short circuit and overheat.
Rechargeable
Battery NP-45
• See “Notes and Cautions” for information on the
battery.
• Always use the Rechargeable Battery NP-45
(included). The use of other brands of rechargeable
battery could cause faults or damage to the camera.
• Do not split or peel outer labels of the battery.
Battery Charger
BC-45A
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Z <Charging Indicator and Statuses>
2 Plug the battery charger into a power outlet.
Charging
Status
The charging indicator lights orange and charging begins.
When charging is completed, the indicator turns off.
Charging completes after about 100 minutes.
Action
Indicator
Battery not
loaded
Load the battery to be
charged.
Off
<Wall type>
Fully charged
(charging
complete)
Remove the battery
from the battery
charger.
Off
Lit orange
Charging
–
To power outlet
Battery fault
Unplug the battery
during charging charger and remove
the battery from the
Blinking orange
battery charger.
CAUTION
• Unplug the battery charger from the power outlet when
it is not in use.
<Cord type>
• If the terminals of battery are soiled, it may not be
possible to charge it. Clean the battery terminals and
battery charger terminals with a clean, dry cloth.
• Charging times increase at low temperatures.
• The NP-45 gradually loses its charge even when not
used. Charge a NP-45 just before taking pictures (in the
last day or two).
To power outlet
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the Battery
Battery is required to operate the digital camera. At first, load the battery in the camera.
1 Open the battery cover.
2 Load the battery.
While pushing the battery release catch aside, load the
battery by aligning the indicator (A orange) and the
battery indicator (B orange).
Check that the battery is firmly held in place.
Battery release catch
CHECK
Check that the camera is turned off before opening the
battery cover.
Align the orange
parts
CAUTION
• Do not open the battery cover while the camera is on.
This could damage the Memory Card or ruin the image
files on the Memory Card.
• Do not apply force to the battery cover.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTION
3 Close the battery cover.
• Load the battery in the correct direction.
• If the battery is loaded with the arrow pointing toward
opposite direction from the camera, or the indicators are
not aligned, it may become jammed and damaged. Use
the battery carefully to avoid overheating, igniting or
exploding.
If the battery is loaded incorrectly, contact a FUJIFILM
dealer. Do not use excessive force to remove the
battery from the camera.
To remove the battery
Battery release catch
Open the battery cover, and unlock the battery release catch
with your finger.
CAUTION
Make sure the camera is turned off before removing the
battery.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the Memory Card
Although you can store pictures in the camera’s internal
memory, you can store many more images on the
Memory Card (sold separately). You can use the xD-
Picture Card and the SD Memory Card with the FinePix
J10 / FinePix J12. In this Owner’s Manual, these cards
are expressed as “Memory Card”.
2 Insert a Memory Card.
(xD-Picture Card)
SD Memory Cards/SDHC Memory Cards
They are operation-checked at FUJIFILM Corporation.
Maker: SanDisk
MEMO
• Compatible Memory Cards will be updated in our
website:
(SD Memory Card)
http://www.fujifilm.com/products/digital_cameras/index.html
• Depending on the SD Memory Card, recording of
movies may be interrupted.
Use of above mentioned SD Memory Cards are
recommended.
• The camera is not compatible with multimedia cards.
1 Open the battery cover.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTION
3 Close the battery cover.
Be sure to unlock the protection of the SD Memory Card
before inserting it. If it is locked, recording/deleting
images, as well as formatting are not available. To unlock
the protection, slide the switch back, and the SD Memory
Card will work normally.
How to replace the Memory Card
Protection
switch
CAUTION
• A new SD Memory Card or a card previously used on a
PC or any device other than the camera should be
formatted (➝p.84) on the camera before use.
• Do not use a miniSD adaptor or a microSD adaptor
which have exposed contact areas on the back. Use of
these adaptors may cause a malfunction or damage
due to the improper contacts.
Push the Memory Card into the slot and then slowly remove
your finger. The lock is released and the Memory Card is
pushed out.
A miniSD adaptor or microSD adaptor bigger than SD
Memory Card standard size may become stuck. Pulling
out forcefully may cause a malfunction. In that case,
contact your FUJIFILM dealer.
Continued Q
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the Memory Card
CAUTION
Z About internal memory
• When storing Memory Cards, make sure that they are
kept out of the reach of children. A Memory Card could
be swallowed and cause suffocation. If a child swallows
a Memory Card, seek medical attention or call
emergency number right away.
• If the Memory Card is oriented incorrectly, it will not go
all the way into the slot. Do not apply force when
inserting a Memory Card.
FinePix J10 / FinePix J12
has internal memory that
can store images without
Memory Card. Y appears
on the LCD monitor when
internal memory is active.
AUTO
N
124
• Note that the Memory Card may spring out if you
release your finger quickly from the card immediately
after the lock is released.
• Operation of this camera is only guaranteed when it is
used with FUJIFILM xD-Picture Card and operation-
checked SD Memory Card (➝p.16).
When a Memory Card (sold separately) is inserted
[Record images]: Record images to a Memory Card.
[Playback images]: Playback images in a Memory Card.
When a Memory Card (sold separately) is not inserted
[Record images]: Record images to internal memory.
[Playback images]: Playback images in internal memory.
• See p.106 for information on the xD-Picture Card, SD
Memory Card and the internal memory.
MEMO
Z About images in the internal memory
• The size of an image file varies depending on the
subject. For this reason, the number recorded may not
represent the actual number of frames.
• See p.122 for information on the standard number of
available frames.
Images held in the camera’s internal memory may be
corrupted or erased due to problems such as camera
faults. Save your important data to another media (i.e.,
DVD-R, CD-R, CD-RW, hard disk, etc.).
It is possible to transfer saved images on the internal
memory to a Memory Card (➝p.67).
CAUTION
Erase the unnecessary images in the internal memory.
(➝p.36)
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Turning On and Off
Turning the camera on in
Shooting mode
Turning the camera on in
Playback mode
Press ON/OFF down fully to turn the camera on.
Press ON/OFF again to turn the camera off.
Press w for about 1 second to turn the camera on in
Playback mode.
Press w during playback to turn the camera off.
MEMO
MEMO
Changes between Shooting mode and Playback
mode
To change to Shooting mode, press the shutter button
down halfway.
Press w during shooting to change to Playback mode.
Press the shutter button down halfway to return to
Shooting mode.
CAUTION
• The lens moves and the lens cover opens when turning
the camera on in Shooting mode. Take care not to
obstruct the lens.
• Take care not to get fingerprints on the camera lens as
this will result in impaired image quality in your shots.
• The ON/OFF button does not completely disconnect the
camera from its power supply.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Turning On and Off
Setting the language, date, and
time
2 Set the date and time.
DATE / TIMME NOT SET
When using the camera for the first time after purchasing,
the language, date, and time are cleared. Set the
language, date, and time.
2010
2009
YY.MM.DD
2008
1. 1
12:00
AM
2007
2006
1 [
] screen appears when turning
the camera on.
SET
NO
START MENU
/ LANG.
APress p or q to select Year, Month,
Day, Hour, or Minute.
BPress n or o to correct the setting.
SET
NO
MEMO
• Holding down n or o changes the numbers
continuously.
• When the time displayed passes “12”, the AM/PM
setting changes.
APress n, o, p, or q to select the
language.
BPress MENU/OK to confirm the setting.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMO
3 Change the date format.
[START MENU] screen also appears when the batteries
have been removed and the camera has been left for a
long period. Once the batteries have been installed for 30
minutes or more, the camera settings will be retained for
roughly 2 hours even if a source of power is removed.
DATE / TIMME NOT SET
DD . MM .YY
MM / DD / YY
YY . MM . DD
12 / 1 / 2008
10:00
AM
Auto power off function
SET
NO
When the Auto power off function is active, if the camera
is left unused for 2 or 5 minutes, this function turns the
camera off (➝p.85). To turn the camera back on, press
ON/OFF. To play back images, hold down w for about
1 second.
APress p or q to select the date format.
BPress n or o to set the format.
CAlways press MENU/OK after the settings
are completed.
Date format
ex. December 1, 2008
[YY.MM.DD]: [2008.12.1]
[MM/DD/YY]: [12/1/2008]
[DD.MM.YY]: [1.12.2008]
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Turning On and Off
Checking the battery charge
Turn the camera on and check the battery level indicator
on the LCD monitor.
AThere is ample battery charge. (Lit white)
BThe battery is almost half charged. (Lit white)
CThere is insufficient charge left in the battery. The
battery will soon run out. Have a charged battery
ready. (Lit red)
DThe battery is depleted. The display will shortly go
blank and the camera will stop working. Replace the
battery. (Blinking red)
CAUTION
• Due to the nature of the battery, the battery level
indicator (
,
, or V) may appear early
when the camera is used in cold locations. Try warming
the battery in your pocket or a similar location before
use.
• Battery with no remaining charge (V blinking red)
may cause camera faults such as the camera turning
itself off without retracting the lens. Always load a fully
charged battery.
• Depending on the camera mode, the transition from
to V may occur more quickly.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Correcting the Date and Time
1 Open the [SET-UP] menu.
2 Display the [DATE/TIME] screen.
SET
-
UP
SHOOTINNG MENU
AUTO
N
ISO
DATE // TIME
BEEP VOOLUME
SHUTTERR VOLUME
PLAYBACK VOLUME
LCD BRIGGHTNESS
QUALITY
SET-UP
APress p or q to select
.
APress MENU/OK to open the menu.
BPress n or o to select [
CPress q.
SET-UP].
BPress o to move to menu item.
CPress n or o to select [ DATE/TIME].
DPress q.
See “2 Set the date and time. ” (➝p.20).
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the Language
1 Open the [SET-UP] menu.
2 Display the [
] screen.
SHOOTINNG MENU
SET
-
UP
AUTO
N
ISO
QUALITY
SET-UP
FORMAT
/ LANG.
ENGLISH
AUTO POOWER OFF
2
MIN
TIME DIFFFERENCE
VIDEO SSYSTEM
NTSC
APress MENU/OK to open the menu.
BPress n or o to select [ SET-UP].
CPress q.
APress p or q to select
.
BPress o to move to menu item.
CPress n or o to select [
DPress q.
].
See “1 [
] screen appears
when turning the camera on. ” (➝p.20).
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Taking Pictures (AUTO Mode)
This section describes the basic operations.
Holding the camera correctly
1 Turn the camera on.
Press ON/OFF down fully to turn the camera on.
Brace your elbows
against your sides and
hold the camera with both
hands.
Do not cover the lens or
flash with your fingers.
CAUTION
• Moving the camera while shooting gives a blurred
picture (camera shake). Hold the camera steadily with
both hands.
• If the lens or flash is obscured by your fingers or the
strap, subjects may be out of focus or the brightness
(exposure) of your shot may be incorrect.
Continued Q
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Taking Pictures (AUTO Mode)
2 Check the composition on the LCD monitor.
3 Focus on the main subject in the AF frame
To adjust zoom scale using the Zoom button:
and press the shutter button down halfway.
AUTO
4
N
W button
T button
(Zoom out)
(Zoom in)
250
F4.2
AF frame
AF frame
Zoom bar
becomessmaller
and camera
focuses on the
subject.
Halfway
pressed
CHECK
• Focus on the subject
Double beep is heard
Indicator lamp lit green
• Not focus on the subject
No sound
{ indicated
Indicator lamp blinking green
• Focal range
Approx. 40 cm (1.3 ft.) to
infinity
• Optical zoom focal
length (35 mm camera
equivalent)
Approx. 38 mm to 113
mm
MEMO
• Max. zoom scale
3×
The shutter button has a halfway point at which focus and
exposure are automatically optimized before taking the
picture by pressing fully down.
MEMO
• Select e Macro mode to take close-up shots (➝p.47).
• Use digital zoom when you want to shoot the subject
closer (➝p.82).
26
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTION
Flash
When pressing the shutter button halfway, a lens
operation sound may be heard.
When pressing the shutter
button down halfway, b
appears on the LCD monitor
before the flash fires.
4 Press the shutter button fully.
Double
Click
beep
250
F4.2
Change the flash mode when you want to take pictures without
flash. See p.48 for information on flash.
Halfway pressed
Fully pressed
CAUTION
CAUTION
• The image shown on the LCD monitor before the
picture is taken may differ in brightness, color, etc. from
the image actually recorded. Play back the recorded
image to check it (➝p.32).
When taking a picture using the flash, the image may
disappear and go dark briefly due to flash charging. The
indicator lamp blinks orange during charging.
• When selecting a slow shutter speed that will cause
camera shake, | appears on the LCD monitor. Use
flash or a tripod.
• See p.107-110 for information on Warning displays.
See “Troubleshooting” (➝p.111-116) for more
information.
MEMO
• When the subject is not in the AF frame, use AF/AE lock
to take the picture (➝p.29).
• When pressing the shutter button down fully in one
motion, the camera takes the picture without the AF
frame changing.
Continued Q
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Taking Pictures (AUTO Mode)
Z Indicator lamp display
Display
Lit green
Status
Locking the focus
The indicator lamp lights or blinks when pressing the
shutter button, etc. The indicator lamp shows the camera
status.
Blinking green
Camera shake warning, AF warning,
or AE warning (ready to shoot)
Lit orange
Recording to Memory Card or internal
memory (not ready)
Blinking orange
Blinking red
Charging flash (flash will not fire)
• Warnings for Memory Card and
internal memory
Indicator lamp
Card not formatted, incorrect format,
memory full, Memory Card or
internal memory error
• Lens operation error
MEMO
Detailed warning messages appear on the LCD monitor
(➝p.107-110).
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Taking pictures with the focus
and exposure locked
Using AF/AE lock
1 Move the camera slightly so that one of the
subjects is in the AF frame.
In the above composition, the subjects (two people in this
case) are not in the AF frame. Pressing the shutter button
halfway at this point will result in the subjects being out of
focus.
2 Press the shutter button down halfway to
focus on the subject.
AF/AE lock is useful:
Use AF/AE lock to guarantee best result when shooting a
subject that is not suited to autofocusing (➝p.30).
Double
beep
250
F4.2
Halfway
pressed
Continued Q
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Taking Pictures (AUTO Mode)
3 Continue to hold the shutter button down
halfway. Move the camera back to the
original image and press the shutter button
fully.
Subjects not suitable for autofocus
FinePix J10 / FinePix J12 uses a high-precision autofocusing
mechanism. However, it may have difficulty focusing on the
following:
Click
250
F4.2
Very shiny subjects such Fast moving subjects
as a mirror or car body
Fully pressed
MEMO
• Subjects photographed through glass
• AF/AE lock can be applied repeatedly before the shutter
is released.
• Use AF/AE lock in all Shooting modes to guarantee
excellent results.
• On FinePix J10 / FinePix J12, pressing the shutter
button down halfway locks the focus and exposure
settings (AF and AE lock).
• Subjects that do not reflect well, such as hair or fur
• Subjects with no substance, such as smoke or flames
• Dark subjects
• Subjects with little or no contrast between the subject and
the background (such as subjects dressed in the same color
as the background)
• Shots where another high-contrast object (not the subject) is
close to the AF frame and is either closer or further away
than your subject (such as a shot of someone against a
background with strongly contrasting elements)
For such subjects use AF/AE lock (➝p.29).
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the shot composition
Best framing
Select the LCD monitor display.
Press DISP/BACK to change the LCD monitor display.
Position the main subject at
the intersection of two lines
in this frame or align one of
the horizontal lines with the
horizon. Use this frame as a
guide to the subject’s size
and the balance of the shot
while composing a shot.
MEMO
Always use AF/AE lock when composing a shot. The
image may be out of focus if AF/AE lock is not used.
AUTO
N
4
Text displayed
No text displayed
AUTO
N
4
Framing guideline
displayed
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing the Images
Play back your images to check them. For important
photographs, always take a test shot and view the image
to make sure that the camera is working normally.
Select the LCD monitor display.
Press DISP/BACK during Playback mode to change the
LCD monitor display.
Setting the camera to Playback
mode
Press w during shooting to change to Playback mode.
100 - 0001
N
ISO 100
When the camera is off, press w for about 1 second to
turn the camera on in Playback mode.
12 / 311 / 2050
250 F4.2
10:00 AM
2
-
1
3
MEMO
Text displayed
No text displayed
• When pressing w, the last image shot appears on the
LCD monitor.
• When playing back images shot with a camera other
than FinePix J10 / FinePix J12, a present icon
appears on the LCD monitor.
2050
12 / 29
12 / 30
12 / 31
CAUTION
Still images viewable on FinePix J10 / FinePix J12
1/12
This camera will display still images recorded on FinePix
J10 / FinePix J12 or still images (excluding some
uncompressed images) recorded on any FUJIFILM digital
camera that supports xD-Picture Cards or SD Memory
Cards. Clear playback or playback zooming may not be
possible for still images shot on cameras other than
FinePix J10 / FinePix J12.
Sorting by date
Multi-frame playback
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Single-frame playback
Playback zoom
1 Zoom in / Zoom out.
100 - 0001
N
ISO 100
To zoom in an image during single-frame playback:
W button
(Zoom out)
T button
(Zoom in)
12 / 311 / 2050
250 F4.2
10:00 AM
2
-
1
3
To select the required image:
Press p: last image
Press q: next image
Zoom bar
Selecting images
To select images on the fast forward screen, hold down
p or q for 1 second during playback.
When releasing p or q, camera returns to single-frame
playback.
Press W or T to zoom in or out on
an image.
Continued Q
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing the Images
Multi-frame playback
2 Display another part of the image.
Multi-frame playback screen (9 frames) appears on the
LCD monitor. Select required frame from the 9 frames.
Navigation screen
(Current displayed
image)
Press n, o, p, or q to display another
part of the image.
APress n, o, p, or q to move the cursor
(colored frame) to the selecting frame.
Press n or o repeatedly to jump to the
next page.
Z Zoom scales
Quality mode
Max. zoom scale
Approx. 5.1×
Approx. 5.1×
Approx. 3.6×
Approx. 2.5×
i (3264 × 2448 pixels)
% (3264 × 2176 pixels)
4 (2304 × 1728 pixels)
2 (1600 × 1200 pixels)
BPress MENU/OK to enlarge the image.
MEMO
Pressing DISP/BACK cancels playback zoom.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Sorting by date
Selecting the date
In sorting by date mode, you can view all images taken on
the same day.
2050
12 / 29
12 / 30
12 / 31
2050
12 / 29
12 / 30
12 / 31
12
1 / 12
APress n, o, p, or q to move the cursor
(colored frame) to on the upper left
frame.
APress n, o, p, or q to move the cursor
(colored frame) to the selecting frame.
BPress p to display the selecting date.
BPress MENU/OK to enlarge the image.
CPress n or o to move the cursor (colored
frame) to select the date.
Press n or o repeatedly to jump to the
next page.
DPress q.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the camera to w
Playback mode (➝p.32)
Erasing the Images/Movies
Use this mode to erase unnecessary images or movies to
have ample free space on the Memory Card or internal
memory. Your camera calls images “frames”.
Erasing the images using
[PLAYBACK MENU]
Using the erase button ( /n)
PLAYBACK MENU
ERASE
Pressing
(n) erases images easily.
SLIDEE SHOW
PRINT ORDEER (DPOF )
PROTECT
ERASE OK?
COPY
OK
CANCEL
APress MENU/OK to open the [PLAYBACK
SET
MENU].
APress p or q to select the erasing
image.
BPress n or o to select [ ERASE].
CPress q.
BPress
(n).
CPress p or q to select [OK].
DPress MENU/OK to erase the displayed
image.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the camera to w Playback mode (➝p.32)
PLAYBBACK MENU
BACK
Erasing one frame at a time ([FRAME])
ERASE
SLIDEE SHOW
FRAME
ALL FRRAMES
ERASE OK?
PRINT ORDEER (DP
PROTECT
COPY
YES
CANCEL
DPress n or o to select [FRAME] or [ALL
FRAMES].
APress p or q to select the erasing frame
(file).
EPress MENU/OK to confirm the setting.
BPress MENU/OK to erase the currently
displayed frame (file).
MEMO
To erase another frame (file), repeat above steps.
When erasing frames (files) is completed, press DISP/
BACK.
CAUTION
Pressing MENU/OK repeatedly erases consecutive
frames (files). Take care not to erase a frame (file) by
mistake.
Continued Q
37
Download from Www.Somanuals.com. All Manuals Search And Download.
ErasingtheImages/Movies
Setting the camera to w Playback mode (➝p.32)
MEMO
Erasing all frames ([ALL FRAMES])
• When using a Memory Card, the images in the Memory
Card are erased. When not using a Memory Card, the
images in the internal memory are erased.
• Selecting [BACK] returns to single-frame playback
without erasing any frames (files).
ERASE AALL OK?
IT MAY TAKKE A WHILE
• Protected frames (files) cannot be erased. Unprotect
the frames (files) before erasing them (➝p.66).
• If [DPOF SPECIFIED. ERASE OK?] or [DPOF
SPECIFIED. ERASE ALL OK?] appears, press MENU/
OK again to erase the frames (files).
YES
CANCEL
CAUTION
Press MENU/OK to erase all the frames
(files).
Erased frames (files) cannot be recovered. Back up
important frames (files) onto your PC or another media.
MEMO
Press DISP/BACK to cancel
erasing of all the frames
(files). Some unprotected
frames (files) will be left
unerased.
CANCEL
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Photography Functions — Procedure of Setting
Specify the camera settings for taking pictures to get the
best result. A general guide is given below.
2 Specify the photography settings.
Pressing buttons or selecting menu allows you to
specify photography functions. You can obtain the
1 Select the Shooting mode.
best result for shooting.
Set the Shooting mode.
The camera settings are tailored to the scene being
shot.
Z Specifying functions using buttons
e Macro
d Flash
Used for close-up shots (➝p.47).
This is the easiest mode for taking
Used for shots in dark locations or for
backlit subjects, etc. (➝p.48).
AUTO
pictures (➝p.42).
/
/m/,/ Select the best Shooting mode for the
Used in situations such as group shots
* Self-timer where the photographer is included in the
shot (➝p.50).
./8/
/
/
/
/
/
/
scene being shot (➝p.42-46).
/
/
This mode provides detailed settings that
are impossible to set in AUTO mode
(➝p.46).
s
SHOOTINNG MENU
SHOOTINNG MODE
M
ISO
AUTO
QUALITY
N
+
0
EXP. COMPEENSATION
WHITE BAALANCE
e (p) Macro button
d (q) Flash button
* (o) Self-timer button
AUTO
MANUAL
AUTO
BABY MODE
ANTI--BLUR
Continued Q
Automatic mode
setting according to
shooting conditions.
SET
CANCEL
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Photography Functions — Procedure of Setting
Z Specifying functions using [SHOOTING MENU]
(MENU/OK button)
Use to specify required sensitivity
setting (➝p.56).
[
ISO]
Use to specify required image size
(➝p.56).
[
[
QUALITY]
EXP.
Use this setting to obtain the correct
COMPENSATION
]
exposure (only s) (➝p.58).
[
WHITE
Use to adjust the color tone (only s)
(➝p.59).
BALANCE]
SHOOTINNG MENU
SHOOTINNG MODE
M
ISO
AUTO
QUALITY
N
+
0
EXP. COMPEENSATION
WHITE BAALANCE
AUTO
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Shooting Mode
You can select the most suitable setting according to the subject by selecting one of the Shooting modes.
CHECK
MANUAL
AUTO
BABY MODE
ANTI--BLUR
• See p.49 for information on available flash modes.
• When anything other than s in the [ SHOOTING
MODE] is selected, only AUTO can be selected for the
Automatic mode
[
ISO] (sensitivity) setting.
setting according to
shooting conditions.
SET
CANCEL
APress MENU/OK to open the menu.
BPress n or o to select [ SHOOTING
MODE].
CPress q.
DPress n or o to select the setting.
EPress MENU/OK to confirm the setting.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Shooting Mode
Setting the mode (➝p.41)
This section describes the available shooting modes.
[m PORTRAIT]
[AUTO]
Use this mode for
photography to get
beautiful skin tones and
soft overall tone.
This is the easiest mode for providing crisp and clear
shots.
Use this mode for ordinary photography.
Camera specifies [
EXP. COMPENSATION] and
[
WHITE BALANCE] settings automatically.
[
BABY MODE]
[, LANDSCAPE]
This function is suitable for taking pictures of young
children. This mode C suppresses the flash so that you
can take their picture with a natural ambience.
Use this mode for shooting
scenery in daylight and
provides crisp, clear shots of
scenery such as buildings
and mountains.
CHECK
Flash cannot be used in the Baby mode.
CHECK
[
ANTI-BLUR] (Picture stabilization)
Flash cannot be used in
the Landscape mode.
This function is suitable for taking a pictures of moving
subjects such as children or pets.
Use this mode to select a fast shutter speed that reduces
camera shake and moving-subject blurring.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the mode (➝p.41)
[. SPORT]
[
NATURAL LIGHT]
Use this mode to take
pictures of a moving subject.
It gives priority to faster
shutter speeds.
This mode produces
beautiful images that retain
the natural ambience when
shots are taken in low-light
conditions.
This mode is also ideal for
shooting indoor or situations
where the flash cannot be
used.
Camera sets the high-sensitivity setting when selecting
the Natural light mode. This mode is effective for reducing
camera shake and moving-subject blurring when taking
pictures in low-light conditions.
[8 NIGHT]
Use this mode for shooting
evening and night scenes.
A picture is taken with a slow
shutter of up to 4 seconds.
CHECK
Flash cannot be used in the Natural light mode.
[
BEACH]
CHECK
Use this mode to prevent
darkening images and
provide crisp, clear shots,
when shooting at beach
under strong sunlight.
Use a tripod to prevent camera shake, because a picture
is taken with a slow shutter.
Continued Q
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Shooting Mode
Setting the mode (➝p.41)
Z Selecting the exposure time setting
[
SNOW]
124
Use this mode to prevent
darkening images and
provide crisp, clear shots,
when shooting at snowy
scene where the whole
screen appears white.
4.0"
Press p or q to select the exposure time.
[
FIREWORKS]
Use this mode to shoot
fireworks.
It is effective for taking
more vivid shots of
fireworks with a slow
shutter.
[
SUNSET]
Use this mode to shoot
sunset, making the colors
more vivid.
CHECK
• Flash cannot be used in the Fireworks mode.
• Shutter speed setting: 1/2 sec. to 8 sec.
• Use a tripod to prevent camera shake in the Fireworks
mode.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the mode (➝p.41)
[
FLOWER]
[
PARTY]
Use this mode to take
clear close-up shots when
zooming up a flower.
It is effective for taking
more vivid shots of flower
petal.
Use this mode for shooting
at indoor wedding and
party.
This mode produces
beautiful images that retain
the natural ambience when
shots are taken in low-light
conditions.
CHECK
• Flash cannot be used in the Flower mode.
• Focal range
Wide angle:
[
MUSEUM]
Use this mode for taking
pictures in places such as
museum where the use of
flash and making an
operation sound and a
shutter sound are
Approx. 15 cm (5.9 in.) to infinity
Telephoto:
Approx. 40 cm (1.3 ft.) to infinity
restricted.
Flash mode is forcibly set
to Suppressed flash and
operation sound, shutter sound and the self-timer lamp
are off.
MEMO
Check whether photography is permitted before using this
mode.
Continued Q
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Shooting Mode
Setting the mode (➝p.41)
[
TEXT]
[s MANUAL]
Use this mode to shoot
documents and white
board.
Set the Photography functions to manual to easily control
yourself.
Photography functions:
It is effective for taking
• [ ISO] (➝p.56)
clearer shots of letters.
• [ EXP. COMPENSATION] (➝p.58)
• [ WHITE BALANCE] (➝p.59)
CHECK
Focal range
Wide angle:
Approx. 15 cm (5.9 in.) to infinity
Telephoto:
Approx. 40 cm (1.3 ft.) to infinity
46
Download from Www.Somanuals.com. All Manuals Search And Download.
e Macro (Close-up)
Use this mode to take close-up shots.
Available Shooting modes: AUTO,
(➝p.42, 43, 45, 46)
CHECK
,
,
,
, s
• Focal range
Wide angle:
Approx. 15 cm (5.9 in.) to infinity
Telephoto:
Approx. 40 cm (1.3 ft.) to infinity
• Effective flash range
Approx. 30 cm to 80 cm (11.8 in. to 2.6 ft.)
Press e (p) to select Macro mode.
Press e (p) again to cancel Macro mode.
MEMO
• When setting
or
mode, the camera sets to
e Macro mode automatically.
• Use a tripod to prevent camera shake in Macro mode.
• Any of the following cancels Macro mode:
- Changing the Shooting mode setting
- Turning the camera off
e appears on the LCD
monitor indicating that you
can take close-up shots.
AUTO
4
47
Download from Www.Somanuals.com. All Manuals Search And Download.
d Setting the Flash
Flash photography is useful for taking pictures at night or
indoor dark locations. Choose from 6 flash modes
according to the type of shot. See p.49 for information on
the available Shooting modes.
[b RED EYE REDUCTION]
This mode is suitable for shooting portraits
in low-light conditions.
Use this mode to minimize red-eye (eyes
appear in red in the finished photo).
MEMO Red-eye effect
When using the flash to take a picture of people in low-
light conditions, eyes may sometimes appear red in the
picture. This is caused by the light of the flash reflecting
off the inside of the eye.
The flash setting
changes each time you
press d(q).
[d FORCED FLASH]
Use this mode in backlit scenes, or to get the correct
colors when taking a picture under bright lighting.
In this mode, the flash fires in bright as well as dark
conditions.
MEMO
When pressing the shutter button down halfway, b
appears on the LCD monitor before the flash fires.
[C SUPPRESSED FLASH]
This mode is suitable for situations where the flash cannot
be used.
Use a tripod to prevent camera shake when shooting in
Suppressed flash mode in the dark condition.
Any time, flash does not fire.
[
AUTO FLASH] (not displayed)
Use this mode for ordinary photography.
The flash fires as required by the shooting conditions.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
CHECK
[c SLOW SYNCHRO],
[n RED EYE & SLOW]
List of available flash modes in each Shooting mode
AUTO
b
d
C
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
c
n
This mode allows you to take pictures of people at night
that clearly show both your subjects and the night time
backdrop. To prevent camera shake, always use a tripod.
Using n synchronizes Red-eye reduction mode.
AUTO
✓
✓
✓
Using 8 selects slow shutter speeds of up to 4 seconds.
✓
✓
✓
✓
✓
✓
m
,
.
8
✓
✓
✓
✓
CAUTION
In bright scenes, overexposure may occur.
✓
✓
CHECK
Effective flash range ( : [AUTO])
Wide-angle:
Approx. 50 cm to 4.0 m (1.6 ft. to 13.1 ft.)
Telephoto:
Approx. 50 cm to 2.2 m (1.6 ft. to 7.2 ft.)
If you take pictures outside of the effective flash range,
the image may appear dark even if the flash is used.
✓
✓
✓
✓
✓
✓
✓
✓
CAUTION Notes on using flash
• If pressing the shutter button while the flash is charging
(indicator lamp blinking orange), the picture will be
taken without the flash (when using AUTO and b).
• The flash charging time may increase when the
batteries are low on charge.
• When taking a picture using the flash, the image may
disappear and go dark briefly due to flash charging. The
indicator lamp blinks orange during charging.
• The flash fires several times (pre-flashes and the main
flash). Do not move the camera until the picture is
taken.
✓
✓
✓
✓
✓
s
✓
✓
✓
✓
49
Download from Www.Somanuals.com. All Manuals Search And Download.
* Self-Timer
The self-timer is used in situations where the
photographer is included in the shot. When photographer
is away from the camera, use a tripod to prevent camera
fall.
Taking pictures using self-timer
1 Press the shutter button down halfway to
focus on the subject and press the shutter
button fully.
Available Shooting modes: All (➝p.42-46)
Setting self-timer
Double
beep
The self-timer setting changes each time you press *
(o).
Beep
Halfway pressed
Fully pressed
The last displayed setting
is the selected mode.
AUTO
N
4
Pressing the shutter button down halfway that focuses
on the subject.
Without releasing the shutter button, press the button
all the way down (fully pressed) to start the self-timer.
: The picture is taken after
10 seconds.
(: The picture is taken after
2 seconds.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Take pictures in selected time.
Using the 2-second self-timer
This is useful when you worry about camera shake even if
attaching the camera on a tripod.
A picture is taken after the self-timer lamp changes
from lit to blinking (only blinks with the 2-second self-
timer).
MEMO
• To stop the self-timer, once it has started running, press
DISP/BACK.
• Any of the following cancels the self-timer setting:
- Completing the shooting
- Changing the Shooting mode setting
- Setting the camera to Playback mode
- Turning the camera off
• Take care not to stand in front of the lens when pressing
the shutter button as this can prevent the correct focus
or brightness (exposure) from being achieved.
A countdown appears on the
LCD monitor indicating the
time remaining until the
picture is taken.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
j Increasing Monitor Brightness
Use this function to increase the brightness of the LCD
monitor temporarily when you have difficulty seeing the
monitor in low-light conditions or in daylight.
MEMO
• This function is automatically canceled after each shot.
• When this function is active, it will increase the amount
of speckling in images on the LCD monitor. This is
normal and does not affect the photographed image.
• This function is purely for checking the composition of
your shot. It does not increase the brightness of the
image.
Increasing the LCD monitor
brightness
Press j (n) to display the LCD monitor brightly.
Press j (n) again to return to normal LCD monitor
brightness.
• Even if you increase the brightness in low-light
conditions, you cannot check the subject.
• The color tones may vary depending on the subjects.
blinks on the LCD monitor
AUTO
124
when the function is on.
UP
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Using [SHOOTING MENU]
Use the [SHOOTING MENU] to adjust image quality. You
can take pictures in a wide range of conditions.
SHOOTINNG MENU
SHOOTINNG MODE
Setting the [SHOOTING MENU]
ISO
QUALITY
EXP. COMPEENSATION
WHITE BAALANCE
SHOOTINNG MENU
SHOOTINNG MODE
M
ISO
AUTO
QUALITY
N
CPress q.
EXP. COMPEENSATION
WHITE BAALANCE
AUTO
DPress n or o to change the setting.
APress MENU/OK to open the [SHOOTING
MENU].
EPress MENU/OK to confirm the setting.
BPress n or o to select the menu.
Continued Q
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Using [SHOOTING MENU]
Z List of [SHOOTING MENU] options
Menu
Factory
default
Functions
Settings
/m/,/./
Use this setting to provide the best photography menu setting for the AUTO/
scene being shot.
/
[
SHOOTING
8/
/
/
/
/
/
/
/
AUTO
MODE] (➝p.41)
/
/s
Specifies required sensitivity setting of the ambient light around the
subject.
[AUTO]/[1600]/[800]/
[400]/[200]/[100]/[64]
[
ISO] (➝p.56)
The larger value of the sensitivity, the higher sensitivity is obtained.
The higher sensitivity settings will allow you to take pictures in darker
locations.
[AUTO]
Specifies the image size.
[
[
QUALITY] (➝p.56) The larger image size, the better image quality is obtained. The smaller iF/iN/%/4/2/`
iN
image size, the larger number of images are recorded.
EXP.
This setting can be used when the [SHOOTING MODE] is set to s.
Use this setting to obtain the correct exposure.
–2 EV to +2 EV
(1/3 EV increments)
COMPENSATION]
(➝p.58)
0
This setting can be used when the [SHOOTING MODE] is set to s.
Use this setting to adjust the color balance to suit the color of the
ambient light around the subject.
[
WHITE BALANCE]
[AUTO] / 6 / 7 / 9 / 0 /
- / 8
[AUTO]
[OFF]
(➝p.59)
[
CONTINUOUS]
Use this setting to select the required Continuous shooting mode.
[ON]/[OFF]
(➝p.60)
54
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMO
Note that the shooting menu will vary depending on the selected shooting mode.
• When shooting mode is set to AUTO,
• When shooting mode is set to s.
,
, m, ,, ., 8,
,
,
,
,
,
,
,
,
.
SHOOTINNG MENU
SHOOTINNG MENU
SHOOTINNG MODE
M
SHOOTINNG MODE
ISO
AUTO
ISO
AUTO
QUALITY
N
QUALITY
N
EXP. COMPEENSATION
WHITE BAALANCE
CONTINNUOUS
SET - UP
OFF
AUTO
55
Download from Www.Somanuals.com. All Manuals Search And Download.
[SHOOTING MENU]
Setting the menu (➝p.53)
Changing the sensitivity setting
Changing the quality setting
([
ISO])
([
QUALITY])
Use this menu to specify required sensitivity setting of the
ambient light around the subject.
The larger value of the sensitivity, the higher sensitivity is
obtained. The higher sensitivity settings will allow you to
take pictures in darker locations.
Use this menu to specify the image size (number of
recorded pixels).
Select the quality setting for the scene being shot.
Z Quality settings in Shooting mode
Quality mode
Sample uses
CHECK
i F (3264 × 2448) Printing at up to 10R (25.4 × 30.5 cm/
i N (3264 × 2448) 10 × 12 in.) / A4 size / A3 size
Settings
[AUTO]/[1600]/[800]/[400]/[200]/[100]/[64]
Selecting [AUTO] as the sensitivity setting, the camera
selects the best sensitivity setting for the subject’s
brightness.
For better quality, select i F
% (3264 × 2176)
4 (2304 × 1728)
2 (1600 × 1200)
` (640 × 480)
Printing at up to 6R (15.2 × 20.3 cm/
6 × 8 in.) / A5 size
The selected sensitivity
M
124
ISO 100
setting appears on the
LCD monitor when the
sensitivity setting is set to
another setting excluding
[AUTO].
Printing at up to 4R (10.2 × 15.2 cm/
4 × 6 in.) / A6 size
To use for e-mail or web site
MEMO
When anything other than [s MANUAL] in the Shooting
mode is selected, only [AUTO] can be selected for the
[ISO] (sensitivity) setting.
CAUTION
Although higher sensitivity settings will allow you to take
pictures in darker locations, they will also increase the
amount of speckling in your images. Choose the
sensitivity setting that best suits the conditions.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the menu (➝p.53)
MEMO
Area shot and quality setting
• The bigger the number of recorded pixels, the better the
image quality becomes. As the number of recorded
pixels becomes smaller, you will be able to record more
frames to a Memory Card.
Area shot excluding % Area shot with %
AUTO
N
4
AUTO
4
• The quality setting is retained even when the camera is
turned off or the mode setting is changed.
• When changing the quality setting, the number of
available frames also changes (➝p.122). The numbers
to the right of setting show the number of available
frames.
Normal shooting provides an aspect ratio of 4:3 and %
shooting provides an aspect ratio of 3:2 (same aspect ratio as
35 mm film and post card).
57
Download from Www.Somanuals.com. All Manuals Search And Download.
[SHOOTING MENU]
Setting the menu (➝p.53)
Adjusting exposure
compensation
([ EXP. COMPENSATION])
Guide to compensation
• Backlit portraits:
+2/3 EV to +1 2/3 EV
Available Shooting mode: s (➝p.46)
Use this menu for shots to get the correct brightness
(exposure), such as shots with extremely high contrast
between the subject and the background.
• Very bright scenes (such as
snowfields) and highly
EXP. COMPEENSATION
+2
reflective subjects: +1 EV
+1
+
0
EV
-1
-2
• Shots made up predominantly of sky: +1 EV
• Spotlit subjects, particularly against dark backgrounds:
–2/3 EV
• Scenes with low reflectivity, such as shots of pine trees
or dark foliage: –2/3 EV
positive (+) compensation
MEMO
• This setting is retained when the camera is turned off
(S icon appears). Set the exposure compensation to
“ 0 EV” unless compensation is required.
• Any of the following disables exposure compensation:
- Using the flash in AUTO or b mode
- Shooting dark scenes in d mode
negative (–) compensation
CHECK
• Compensation range: –2 EV to +2 EV
(13 steps in 1/3 EV increments)
• Explanation of Terms “EV” (➝p.124)
• The LCD monitor brightness will increase or decrease
depending on the exposure compensation setting.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the menu (➝p.53)
MEMO
Adjusting color balance
([ WHITE BALANCE])
• In [AUTO] mode, the correct white balance may not be
achieved for subjects such as close-ups of people’s
faces and pictures taken under a special light source.
Select the correct white balance for the light source.
• When the flash fires, the white balance setting for the
flash is used. Consequently, to achieve a particular
effect, the flash mode should be set to
Available Shooting mode: s (➝p.46)
Adjust the color balance based on white to suit the color
of the ambient light around the subject.
[C SUPPRESSED FLASH] (➝p.48).
• The color tones may vary depending on the shooting
conditions (light source, etc.).
WHITE BAALANCE
AUTO
• After taking the picture, check the image color (white
balance).
• Explanation of Terms “White Balance” (➝p.124)
[AUTO]: Automatic adjustment
6 : Shooting outdoors in good weather
7: Shooting in shade
9: Shooting under Daylight fluorescent lamps
0: Shooting under Warm White fluorescent lamps
-: Shooting under Cool White fluorescent lamps
8 : Shooting in incandescent light
59
Download from Www.Somanuals.com. All Manuals Search And Download.
[SHOOTING MENU]
Setting the menu (➝p.53)
Taking pictures continuously
([ CONTINUOUS])
Shooting continues as long as
holding the shutter button
down. This mode shoots up to
3 frames (approx. 1 frame/
sec.).
STORING
Available Shooting modes: All (➝p.42-46)
Use this mode to take pictures of a moving subject.
SHOOTINNG MENU
CONTINNUOUS
SET - UP
ON
OFF
MEMO
The file recording time using the continuous shooting may
increase when recording in the xD-Picture Card or
internal memory.
CAUTION
• Number of available frames is limited depending on the
available space on the Memory Card or internal
memory.
• The focus is determined in the first frame and cannot be
changed in mid-sequence.
• The exposure is determined in the first frame.
• The speed of continuous shooting varies depending on
the shutter speed.
• The flash cannot be used as the flash mode is set to [C
SUPPRESSED FLASH] (➝p.48). However, when the
mode is changed back to normal photography, the flash
setting specified before continuous shooting was
selected is restored.
• The results are always displayed after you shoot.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Using [PLAYBACK MENU]
Use this menu to play back photographed images.
PLAYBACK MENU
BACK
ERASE
Setting the [PLAYBACK MENU]
SLIDEE SHOW
FRAME
ALL FRRAMES
PRINT ORDEER (DP
PROTECT
APress w to set the camera to Playback
mode (➝p.32).
COPY
PLAYBACK MENU
ERASE
EPress n or o to change the setting.
FPress MENU/OK to confirm the setting.
SLIDEE SHOW
PRINT ORDEER (DPOF )
PROTECT
COPY
BPress MENU/OK to open the [PLAYBACK
MENU].
CPress n or o to select the menu.
DPress q.
61
Download from Www.Somanuals.com. All Manuals Search And Download.
[PLAYBACK MENU]
Setting the menu (➝p.61)
Setting automatic playback
([ SLIDE SHOW])
DPOF set frame
([ PRINT ORDER (DPOF)])
Use this mode to play back photographed images
continuously. You can select playback interval and type of
image transition.
You can specify the image, number of prints, with or
without date of printing with a DPOF-compatible printer.
PLAYBACK MENU
ERASE
WITH DATE
WITHOUUT DATE
RESET ALL
SLIDEE SHOW
PLAYBACK MENU
PRINT ORDEE
PROTECT
ERASE
NORMAL
NORMAL
WIPE
WIPE
SLIDEE SHOW
COPY
PRINT ORDEE
PROTECT
COPY
[WITH DATEE] : The date will be imprinted on your
prints.
[WITHOUT DATE] : The date will not be imprinted on
your prints.
MEMO
• To interrupt [ SLIDE SHOW], press MENU/OK.
• Press p or q to advance or go back through the
images.
[RESET ALL]
: All DPOF settings will be canceled.
• The Auto power off function (➝p.85) does not operate
during slide show.
• Movie starts automatically. When the movie ends, the
playback function moves it on.
• Press DISP/BACK once during playback to display on-
screen help.
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the menu (➝p.61)
MEMO Canceling DPOF setting
[WITH DATE] / [WITHOUT DATE]
A Press MENU/OK to open the [PLAYBACK MENU] and
press n or o to select [ PRINT ORDER (DPOF)].
B Press q.
Selecting [WITH DATEE], E appears on the LCD
monitor and the date will be imprinted on your prints.
C Press n or o to select [WITH DATE E] or
[WITHOUT DATE] and press MENU/OK to display the
print order screen.
D Press p or q to select the frame (file) with the DPOF
setting you want to cancel.
(
)
PRINT ORDER DPOF
DPOF 00009
:
Total number of prints
Setting for that frame
E Press o to set the number of prints to 0 (zero).
SHEETS
01
To cancel the DPOF setting for another frame (file),
repeat steps D and E.
FRAME
SET
Always press MENU/OK to complete the settings.
• [RESET ALL] (➝p.64)
APress p or q to display the frame (file)
for specifying DPOF setting.
Continued Q
BPress n or o to set a value.
Up to 99 sheets are printed.
For frames (files) that you do not want
printed, set the number of prints to 0
(zero).
To specify more DPOF settings, repeat steps A and B.
CAlways press MENU/OK after the settings
are completed.
Pressing DISP/BACK cancels those
settings.
DPress MENU/OK again.
The total number of prints appears on the
LCD monitor.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
[PLAYBACK MENU]
Setting the menu (➝p.61)
MEMO
[RESET ALL]
• When DPOF settings were specified on another
camera.
To cancel all DPOF settings:
RESET DPPOF OK?
RESET DPPOF OK?
YES
NO
YES
CANCEL
When the data includes a frame (file) with DPOF
settings that were specified on another camera,
Select [RESET ALL] in the [PLAYBACK MENU] (➝p.62).
[
RESET DPOF OK?] appears.
Pressing MENU/OK erases all of the DPOF settings
already specified for each frame (file). Specify the
DPOF setting for each frame (file) again.
Press MENU/OK.
• Prints of up to 999 frames (files) can be ordered on the
same Memory Card.
• DPOF settings cannot be specified for movies.
MEMO
CAUTION
100 - 0001
N
• Pressing DISP/BACK while choosing settings will
cancel all current settings. If there were previous DPOF
settings, only the modifications are canceled.
• When selecting the [WITH DATE E] setting, the date
is imprinted on your shots using the Print Service or a
DPOF-compatible printer (depending on the printer
specifications, the date may not be printed in some
cases).
ISO 100
12 / 31 // 2050
250 F4.2
10:00 AM
u appears on the LCD monitor during playback when the
image has specified DPOF settings.
• Images photographed with a camera other than FinePix
J10 / FinePix J12 may not be specified DPOF settings.
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the menu (➝p.61)
Z u PRINT ORDER (DPOF)
DPOF stands for Digital Print Order Format and refers to a format that is used for recording printing specifications
for images shot using a digital camera on media such as a Memory Card. The recorded specifications include
information on which frames are to be printed.
This section gives a detailed description of how to order your prints with FinePix J10 / FinePix J12.
Some printers do not support date and time imprinting or specification of the number of prints.
The warnings shown below may appear while specifying the prints.
*
*
[DPOF SPECIFIED. ERASE OK ?]
[DPOF SPECIFIED. ERASE ALL OK ?] (➝p.38)
When erasing the image, the DPOF setting for that image is deleted at the same time.
[
RESET DPOF OK ?] (➝p.64)
When inserting a Memory Card that contains images specified for printing by another camera, those print specifications are all
reset and replaced by the new print specifications.
[DPOF FILE ERROR] (➝p.109)
Up to 999 images can be specified on the same Memory Card.
65
Download from Www.Somanuals.com. All Manuals Search And Download.
[PLAYBACK MENU]
Setting the menu (➝p.61)
Protecting the images
([ PROTECT])
[SET ALL]
SET ALLL OK?
IT MAY TAKKE A WHILE
Use this mode to prevent frames (files) from being
accidentally erased. Your camera calls images “frames”.
[FRAME] (set or reset a frame)
To protect or unprotect only the selected frame (file):
YES
CANCEL
Press MENU/OK to protect all the frames
(files).
PROTECT OK?
UNPROTEECT OK?
[RESET ALL]
YES
CANCEL
YES
CANCEL
RESET AALL OK?
IT MAY TAKKE A WHILE
Unprotected
Protected (F appears)
APress p or q to select the protecting/
unprotecting frame (file).
YES
CANCEL
BPress MENU/OK to protect/unprotect the
currently displayed frame (file).
Unprotected: protecting frame (file)
Protected: reset frame (file)
Press MENU/OK to unprotect all the frames
(files).
To protect another frame (file), repeat steps A and B.
When protecting frames (files) is completed, press DISP/
BACK.
66
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the menu (➝p.61)
MEMO To stop the procedure midway
Copying the images
([ COPY])
It is possible to transfer saved images between the
internal memory and a Memory Card. Your camera calls
images “frames”.
Z Selecting COPY
CANCEL
COPY
If the images are very large, protecting or unprotecting all
the frames (files) may take some time.
If you want to take a picture or record a movie during the
procedure, press DISP/BACK.
INTERNAL MEMORY
CARD
CARD
INTERNAL MEMORY
CAUTION
NEXT
CANCEL
The Format function erases all the frames (files),
including protected frames (files) (➝p.84).
APress n or o to select [Y INTERNAL
MEMORY Q \ CARD] or [\ CARD Q
Y INTERNAL MEMORY].
BPress q.
Continued Q
67
Download from Www.Somanuals.com. All Manuals Search And Download.
[PLAYBACK MENU]
Setting the menu (➝p.61)
Copying one frame at a time ([FRAME])
COPY OK?
100 - 0001
COPY
INTERNAL MEMORY
CARD
FRAME
ALL FRAMES
IN
YES
CANCEL
YES
CANCEL
CPress p or q to select the copying frame
(file).
APress n or o to select [FRAME].
BPress MENU/OK.
DPress MENU/OK to copy the currently
displayed frame (file).
MEMO
To copy another frame (file), repeat steps C and D.
When copying frames (files) is completed, press DISP/
BACK.
68
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the menu (➝p.61)
Copying all frames ([ALL FRAMES])
COPY ALLL OK?
100 - 0001
100 - 0001
IT MAY TAKE
A WHILE
COPY
INTERNAL MEMORY
CARD
FRAME
ALL FRAMES
IN
YES
CANCEL
YES
CANCEL
CPress MENU/OK to copy all the frames
(files).
APress n or o to select [ALL FRAMES].
BPress MENU/OK.
CAUTION
• When [\ MEMORY FULL] or [Y MEMORY FULL]
appears on the LCD monitor, copying the data stops on
the way.
• When copying the image that has specified DPOF
setting, the DPOF setting is not copied.
69
Download from Www.Somanuals.com. All Manuals Search And Download.
[PLAYBACK MENU]
Setting the menu (➝p.61)
Rotating the images
IMAGE RROTATE
([ IMAGE ROTATE])
When shooting in the vertical position, the image appears
horizontal on the LCD monitor.
Use this mode to rotate an image and to display correct
direction.
SET
CANCEL
CAUTION
EPress n or o to rotate the image.
o: Rotates the image clockwise at a 90
degree angle.
Protected frames (files) cannot be rotated. Unprotect the
frames (files) before rotating them (➝p.66).
n: Rotates the image counterclockwise at
a 90 degree angle.
MEMO
An image can be rotated only when playing back using
FinePix J10 / FinePix J12.
You may not be able to rotate images that were shot with
a camera other than FinePix J10 / FinePix J12.
APress p or q to select the rotating frame
(file).
BPress MENU/OK to open the [PLAYBACK
MENU].
CPress n or o to select [
ROTATE].
IMAGE
FPress MENU/OK to confirm the setting.
Next time the image is played back, it will
be automatically rotated.
Press DISP/BACK to cancel rotating the
image.
DPress MENU/OK.
70
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the menu (➝p.61)
Trimming the images
([ TRIMMING])
2 Specify trimming part of image.
W button
T button
(Zoom out)
(Zoom in)
Use this mode to trim the required part of the
photographed image.
TRIMMING
TRIMMING
1 Select the menu.
APress w to set the camera to Playback
mode (➝p.32).
YES
CANCEL
YES
CANCEL
Zoom bar
BPress p or q to select the trimming
frame (file).
APress W or T to zoom in or out
on an image.
CPress MENU/OK to open the [PLAYBACK
MENU].
TRIMMING
Navigation screen
(Current displayed image)
DPress n or o to select [ TRIMMING].
YES
CANCEL
EPress q.
BPress n, o, p, or q to display another
part of the image.
Continued Q
71
Download from Www.Somanuals.com. All Manuals Search And Download.
[PLAYBACK MENU]
Setting the menu (➝p.61)
MEMO
• Press DISP/BACK to return to single-frame playback.
• A saved image size varies depending on the zoom
scale of step 2. For 0.3 M, k YES option appears in
yellow.
CPress MENU/OK.
REC OK?
• Image sizes
Printing at up to 6R (15.2 × 20.3 cm/6 × 8 in.) /
A5 size
4
Printing at up to 4R (10.2 × 15.2 cm/4 × 6 in.) /
A6 size
2
REC
CANCEL
To use for e-mail or web site
`
• When % quality setting is selected, the image is
trimmed to normal size (4:3 aspect ratio).
3 Record the image.
Check the saved image size and press
MENU/OK.
CAUTION
The trimmed image is added as a separate
file in the final frame.
You may not be able to trim images that were shot with a
camera other than FinePix J10 / FinePix J12.
72
Download from Www.Somanuals.com. All Manuals Search And Download.
r Recording Movies
Use this mode to record movies.
Z Zooming the image
You must zoom beforehand as you cannot zoom during
recording.
Set the camera to r Movie mode
STANDBY
13s
Zoom bar
APress MENU/OK to open the menu.
BPress n or o to select [q SHOOTING
MODE].
Press W or T to zoom in or out on
an image.
CPress q.
CHECK
• Optical zoom focal length
Approx. 38 mm to 113 mm (35 mm camera equivalent)
Max. zoom scale: 3×
DPress n or o to select [r MOVIE].
• Focal range
Approx. 40 cm (1.3 ft.) to infinity
EPress MENU/OK to confirm the setting.
The available recording
time appears on the LCD
STANDBY
13s
monitor.
73
Download from Www.Somanuals.com. All Manuals Search And Download.
r Recording Movies
MEMO
Record movies
• The brightness and color of the LCD monitor shown
during movie recording may differ from those shown
before recording begins.
• Pressing the shutter button down fully fixes the focus,
however the exposure and white balance are adjusted
to the scene being shot.
REC
12s
• If recording is stopped immediately after it begins,
1 second of the movie is recorded onto the Memory
Card or internal memory.
• See p.122 for information on recording times per
Memory Card or internal memory.
Fully pressed
Press the shutter button down fully to start recording.
During recording, [lREC] and a counter that shows the
remaining time appear on the LCD monitor.
CAUTION
• Because a movie is recorded onto the Memory Card or
internal memory as it is saved, it cannot be recorded
correctly if the camera suddenly loses power (if the
batteries run out).
• A movie file taken by FinePix J10 / FinePix J12 may not
be playable on other cameras.
• Because sound is recorded concurrently with the
images, make sure that you do not cover the
microphone with a finger, etc. (➝p.10).
Recording ends when pressing
the shutter button down
halfway during recording or the
• Camera operation noises may be recorded during
movie shooting.
remaining time runs out.
• If you shoot using the xD-Picture Cards with model
numbers containing “M” such as DPC-M1GB, movie
recording time may be reduced if you repeatedly record
and erase (frame erase) image files.
Halfway pressed
MEMO
In such a case, erase all frames or format the
xD-Picture Card before use. Back up important frames
(files) onto your PC or another media.
There is no need to hold down the shutter button during
recording.
• The size of a movie file can be up to 2GB.
CHECK Recording movies
• Specifications: Motion JPEG (➝p.124)
Monaural sound
• Quality selection method:$ (320 × 240 pixels)
% (640 × 480 pixels)
• Frame rate (➝p.124): 30 frames per second (fixed)
74
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMO
Changing movie size
• The quality setting is retained even when the camera is
turned off or the mode setting is changed.
Press MENU/OK to open the [SHOOTING MENU].
• In r Movie mode, you cannot set the [
ISO]
(sensitivity) setting.
SHOOTINNG MENU
SHOOTINNG MO
3s
9s
QUALITY
SET-UP
APress n or o to select [
BPress q.
QUALITY].
CPress n or o to change the setting.
DPress MENU/OK to confirm the setting.
Z Quality settings in Movie mode
% (640 × 480 pixels): For better quality
$ (320 × 240 pixels): To record longer movies
75
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the camera to w
Playback mode (➝p.32)
w Playing Back Movies
Z Playing back movies
Control
Description
100 - 0002
Playback begins.
Playback stops when the end of
the movie is reached.
Playback
12 / 31 // 2050
PLAY
10:00 AM
Pauses the movie during
playback.
Press o again to resume
playback.
Pause /
Resume
APress p or q to select the movie file. r
appears on the LCD monitor.
Stops playback.
Press p or q while playback is
stopped to go back to the previous
file or advance to the next file
respectively.
Stop
BPress o to begin playing back movie.
Press p or q during playback to
skip forwards or backwards
through the movie.
Fast
forward /
Rewind
The playback time appears on
the LCD monitor along with a
progress bar.
30s
Press p or q when the movie is
paused, the movie advances or
goes back one frame.
Hold down p or q to move
through the frames quickly.
Skip
playback
STOP
PAUSE
Progress bar
76
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the camera to w Playback mode (➝p.32)
MEMO
Adjusting volume of movies
If the subject of the shot is very bright, white vertical
streaks or black horizontal streaks may appear in the
image during playback. This is normal.
You can adjust the volume of the movie with FinePix J10 /
FinePix J12.
VOLUME
CAUTION
• You may not be able to play back some movie files
recorded on other cameras.
• To play back movie files on a PC, save the movie file on
the Memory Card or internal memory to the PC’s hard
disk and then play back the saved file.
7
SET
CANCEL
• When using FinePix J10 / FinePix J12, make sure not
to cover the speaker. The sound is difficult to hear.
APress MENU/OK while playing back
movie.
The movie is paused during playback.
BPress n or o to adjust the volume.
CPress MENU/OK to confirm the setting.
Camera starts to play back the movie.
77
Download from Www.Somanuals.com. All Manuals Search And Download.
[
SET-UP]
Using the [SET-UP] menu
3 Change the setting.
SET
-
UP
1 Open the [SET-UP] menu.
FORMAT
/ LANG.
AUTO POOWER OFF
TIME DIFFFERENCE
VIDEO SSYSTEM
5 MIN
2 MIN
OFF
APress MENU/OK to open the menu.
BPress n or o to select [ SET-UP].
CPress q.
APress n or o to select the menu.
BPress q.
Different type of screen appears
depending on selected item.
2 Change the page.
SET
-
UP
CPress n or o to change the setting.
DPress MENU/OK to confirm the setting.
FORMAT
/ LANG.
ENGLISH
MIN
AUTO POOWER OFF
TIME DIFFFERENCE
VIDEO SSYSTEM
2
NTSC
APress p or q to select the page.
BPress o to move to menu item.
78
Download from Www.Somanuals.com. All Manuals Search And Download.
How to use the [SET-UP] menu (➝p.78)
[SET-UP] menu option
Setting
Display
Factory default
Explanation
Page
Sets the way for displaying the check image screen
(photograph result) after taking a picture. The
image is displayed for 3 or 1.5 seconds and then
recorded. The color tones in images recorded may
differ from actual color. Play back the recorded
images to check them.
[
[
IMAGE DISP.]
[3 SEC]/[1.5 SEC]
[1.5 SEC]
–
q
Specifies whether frame numbers are assigned
consecutively from previous numbers or begin
again.
FRAME NO.]
[CONT.]/[RENEW]
[CONT.]
81
82
[
[
DIGITAL ZOOM]
LCD POWER
[ON]/[OFF]
[ON]/[OFF]
–
[OFF]
[ON]
–
Specifies whether digital zoom is used together.
Darkens the LCD monitor when camera is not used. 83
SAVE
]
[
[
[
DATE/TIME]
BEEP VOLUME]
SHUTTER
Corrects the date or time.
23
–
Sets the volume of the tone emitted when the
camera controls are used.
/
/
/
/[
/[
]
]
Sets the volume of the sound emitted when the
shutter operates.
/
–
VOLUME]
[
PLAYBACK
Sets the volume of playing back movie.
–
–
[7]
[0]
83
84
VOLUME]
[
LCD
Sets the LCD monitor brightness.
BRIGHTNESS]
Continued Q
79
Download from Www.Somanuals.com. All Manuals Search And Download.
[ SET-UP]
How to use the [SET-UP] menu (➝p.78)
Setting
FORMAT]
Display
Factory default
Explanation
Page
Initializes a Memory Card or internal memory.
Select this menu to erase all the frames (files).
[
–
–
84
Specifies the language used for LCD monitor
display.
[
[
]
[ENGLISH]
24
AUTO POWER
Sets the time of turning camera off when camera is
not used.
[5 MIN]/[2 MIN]/[OFF]
N/I
[2 MIN]
N
85
85
–
OFF]
[
TIME
Specifies the time difference settings.
DIFFERENCE]
Specifies whether video output is set to NTSC or
PAL.
[
VIDEO SYSTEM]
[NTSC]/[PAL]
–
Resets all the camera settings (other than the
[DATE/TIME], [TIME DIFFERENCE], and [VIDEO
SYSTEM]) to the factory default values set at
shipment. A confirmation message appears when
you press q. To reset the camera settings, press
p or q to select [OK] and press MENU/OK.
[
RESET]
–
–
–
80
Download from Www.Somanuals.com. All Manuals Search And Download.
How to use the [SET-UP] menu (➝p.78)
CHECK
[FRAME NO.]
Frame number
Use this function to specify whether frame numbers are
assigned consecutively from previous numbers or begin
again.
100 - 0001
File number
<CONT.>
<RENEW>
A
B
Directory number
The last 4 digits of the 7-digit number in the top right
corner of the LCD monitor are the file numbers, while
the first 3 digits show the directory number.
MEMO
Formatted Memory Card or internal memory used for
both A and B.
*
• Setting this function to [CONT.] makes file management
easier as it makes sure that file names are not
duplicated when images are downloaded to a PC.
[CONT.] : Pictures are stored beginning from the highest
file number stored on the last Memory Card or
internal memory used.
• When the camera settings are [
RESET] (➝p.80),
the frame number setting ([CONT.] or [RENEW]) is
changed to [CONT.] and the frame number itself does
not return to 0001.
• In [CONT.] setting, images are stored beginning from
the highest file number on the current Memory Card
when the Memory Card already contains image files
with file numbers higher than the highest file number on
the last Memory Card.
[RENEW] : Pictures are stored on each Memory Card
beginning with a file number 0001.
Each image will be numbered consecutively
from the last number used. So when recorded
images in the Memory Card are erased, the
number of the erased frame will not be used
again.
• The displayed frame number may differ for images
photographed on other cameras.
81
Download from Www.Somanuals.com. All Manuals Search And Download.
[ SET-UP]
How to use the [SET-UP] menu (➝p.78)
CHECK
• Optical zoom focal length
Approx. 38 mm to 113 mm
[DIGITAL ZOOM]
*
Use this function to shoot enlarged images than
maximum optical zoom scale.
• Digital zoom focal length
Approx. 113 mm to 576 mm
*
Max. zoom scale: approx. 5.1×
AUTO
N
124
35 mm camera equivalents
*
Zoom bar
MEMO
When zooming changes between optical and digital, the
position of the “ ” indicator stops. Press the same Zoom
button again to start the “ ” indicator moving again.
Z Zoom bar display
[OFF]
Optical zoom: 3×
[ON]
Optical zoom: 3× Digital zoom:
approx. 5.1×*
CAUTION
Using the [DIGITAL ZOOM] allows you to enlarge your
subject and shoot it. However, it will lower your image
quality. Set the [DIGITAL ZOOM] when requiring it.
82
Download from Www.Somanuals.com. All Manuals Search And Download.
How to use the [SET-UP] menu (➝p.78)
[LCD POWER SAVE]
[PLAYBACK VOLUME]
The LCD monitor darkens when camera is not used for 8
seconds.
Use this function to adjust volume while playing back
movie.
When this function is active, you can save power and get
the maximum possible running time from your batteries.
VOLUME
MEMO
7
Pressing any button wakes the camera up.
CAUTION
SET
CANCEL
The LCD power save function is disabled during Playback
mode and Movie mode.
APress n or o to adjust the volume.
The larger the number, the larger the
volume is emitted. 0 indicates a sound
deadening.
BPress MENU/OK to confirm the setting.
83
Download from Www.Somanuals.com. All Manuals Search And Download.
[ SET-UP]
How to use the [SET-UP] menu (➝p.78)
[LCD BRIGHTNESS]
[FORMAT]
Use this function to adjust the LCD monitor brightness.
Initialize (format) the Memory Card or internal memory for
use with the camera.
LCD BRIGGHTNESS
FORMAT
Place of initialize
FORMAAT OK?
[Y FORMAT]:
Internal memory
[\ FORMAT]:
Memory Card
ERASE ALLL DATA
0
OK
CANCEL
SET
CANCEL
SET
APress n or o to adjust the LCD monitor
brightness.
The indicator moves to the + to display the
LCD monitor brightly or to the – to darken
the LCD monitor.
APress p or q to select OK.
BPressing MENU/OK initializes the Memory
Card or internal memory.
BPress MENU/OK to confirm the setting.
CAUTION
• The Format function erases all the frames (files),
including protected frames (files).
Back up important frames (files) onto your PC or
another media.
• Do not open the battery cover or expose the camera to
shock during formatting, as formatting will be
interrupted.
84
Download from Www.Somanuals.com. All Manuals Search And Download.
How to use the [SET-UP] menu (➝p.78)
[AUTO POWER OFF]
[TIME DIFFERENCE]
When this function is active and the camera remains
unused for 2 or 5 minutes, it turns camera off.
Use this function when you want to get the maximum
possible running time from your batteries.
Use this function when traveling to destinations in
different time zones. This function sets a time difference
relative to the date and time currently set. When this
setting is enabled, the specified time difference is applied
when pictures are taken.
CAUTION
1 Use Time difference function.
The Auto power off function is disabled during slide show
(➝p.62), and when a printer or a PC connection (➝p.88,
97) is being used.
SET
-
UP
FORMAT
HOME
LOCAL
MEMO To restore power to the camera
AUTO POOWER OF
TIME DIFFFERENC
VIDEO SSYSTEM
Refer to “Turning On and Off” (➝p.19).
Press n or o to change between [N
HOME] and [I LOCAL].
To set the time difference, select [I LOCAL].
[N HOME]: Your home time zone
[I LOCAL]:Your destination time zone
Continued Q
85
Download from Www.Somanuals.com. All Manuals Search And Download.
[ SET-UP]
How to use the [SET-UP] menu (➝p.78)
CHECK
2 Move to [TIME DIFFERENCE] screen.
Available time setting
–23:45 to +23:45 (in 15-minute increments)
SET
-
UP
MEMO
FORMAT
HOME
LOCAL
AUTO POOWER OF
TIME DIFFFEREN
VIDEO SSYSTEM
In the time difference
M
N
124
setting, when you change to
the Shooting mode, I and
the date is displayed for 3
seconds, the date display
turns yellow.
Press q.
12 / 31 // 2050
11:00 AM
3 Set time difference.
CHECK
Upon returning from a trip, always change the time
difference setting back to [N HOME] and then check the
date and time again.
TIME DIFFFERENCE
12
/
/
31
31
/
/
2050 10
2050 10
:
:
00 AM
00 AM
12
SET
CANCEL
APress p or q to select +/–, hour, and
minute.
BPress n or o to change the setting.
CAlways press MENU/OK after the settings
are completed.
86
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to a TV
When connecting to a TV, images can be displayed on wider screen. Using slide show function (➝p.62) together, you can have
fun with folks.
Plug the A/V cable (included) into
the A/V OUT (Audio/Visual
output) socket of the camera.
A/V cable
(included)
Video (yellow)
To terminals
Audio (white)
Plug the other end of the cable into the
audio/video input socket on the TV.
CAUTION
MEMO
Plug the A/V cable (included) correctly in its terminal.
• When connecting the A/V cable (included) to TV, the
LCD monitor is turned off.
• The image quality for movie playback is lower than for
still images.
• When connecting to a TV, even if you adjust the volume
from the [
PLAYBACK VOLUME], the TV volume
cannot be changed. Refer to the instructions provided
with your TV for more information on audio/video input
for your TV.
• Use a fully charged battery when FinePix J10 / FinePix
J12 is connected to a TV for long periods.
87
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting Camera Directly to Printer — PictBridge Function
When a printer that supports PictBridge is
available, images can be printed by connecting
the camera directly to the PictBridge-
compatible printer without a PC.
2 Connect the camera to a printer and turn the
printer on. Press w for about 1 second to
turn the camera on.
[
USB] appears on
USB
the LCD monitor.
Connecting to a printer
1 Connect the camera to your printer using
the USB cable.
; USB socket
3 The following screen appears on the LCD
monitor after a moment.
“Specifying images for
printing”
PICTBRRIDGE
TOTAL :: 00000
➝p.89
“Printing with DPOF setting”
➝p.90
SHEETS
00
FRAME
OK
SET
MEMO
Depending on the printer, some functions are disabled.
MEMO
Use a fully charged battery when FinePix J10 / FinePix
J12 is connected to a printer.
88
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifying images for printing
([PRINT WITH DATE] / [PRINT
WITHOUT DATE])
PRINT THESSE FRAMES
:
TOTAL 9 SHEETS
PICTBRRIDGE
TOTAL :: 00002
YES
CANCEL
DPress MENU/OK again to download the
data to the printer and start printing the
specified number of prints.
SHEETS
02
FRAME
OK
SET
MEMO
APress p or q to display the frame (file)
for specifying PRINT setting.
Even if MENU/OK is pressed with total number of images set
at 0 (zero), the screen printing once appears on the LCD
monitor. Press MENU/OK again and printing starts.
MEMO Printing with date
B
Press
n
or
o
to set a value.
Up to 99 sheets are printed.
APress DISP/BACK to
display the setting
display.
PICTBRRIDGE
To specify more PRINT settings, repeat steps A and B.
PRINT WIITH DATE
PRINT WITTHOUT DATE
PRINTT DPOF
BPress n or o to select
[PRINT WITH
DATEE].
CPress MENU/OK to display the confirm
setting.
CPress MENU/OK.
CAUTION
[PRINT WITH DATEE] is not available when the camera
is connected to a printer that does not support date
printing.
89
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting Camera Directly to Printer — PictBridge Function
Printing with DPOF setting
([u PRINT DPOF])
PRINT DPPOF OK?
TOTAL 9 SHEETS
:
PICTBRRIDGE
PRINT WIITH DATE
PRINT WITHHOUT DATE
PRINTT DPOF
YES
CANCEL
DPress MENU/OK again to download the
data to the printer and start printing the
specified frames (files) continuously.
CHECK
APress DISP/BACK to open the menu.
To select [uPRINT DPOF], the DPOF settings must be
specified on FinePix J10 / FinePix J12 beforehand
(➝p.62).
BPress n or o to select [u PRINT DPOF].
CAUTION
Even when [WITH DATEE] is specified in the DPOF
settings (➝p.62), the date is not inserted on printers that
do not support date printing.
CPress MENU/OK to display the confirm
setting.
90
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMO
MEMO
DPOF setting can be specified for images on internal
memory.
PRINTING
CAUTION
• In PictBridge function, images photographed on other
than a camera may not be printed.
• The camera cannot be used to specify printer settings
such as the paper size and print quality.
CANCEL
• Use internal memory or a Memory Card that was
formatted on FinePix J10 / FinePix J12.
• Movies cannot be printed.
• Images photographed with a camera other than FinePix
J10 / FinePix J12 may not be printed.
Press DISP/BACK to cancel the printing.
Depending on the printer, the printing may not be
canceled immediately or printing may stop midway
through.
When printing stops midway, briefly turn the camera off
and then on again.
Disconnecting the printer
ACheck that [PRINTING] is not displayed on the
camera’s LCD monitor.
BTurn the camera off. Unplug the USB cable.
91
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation on a Windows PC
Pre-installation checklist
Z Hard ware (software) requirements and recommended system
To run this software, you must have the hardware and software described below. Check your system before you begin the
installation.
Requirement
Recommendation
Windows 98 SE
Windows XP
Windows Vista
Windows Millennium Edition (Windows Me)
2
Operating
1
System
*
Windows 2000 Professional
*
2
Windows XP Home Edition
*
2
Windows XP Professional
*
2
Windows Vista
*
200 MHz Pentium minimum
(Windows XP/Vista users: 800MHz Pentium 4 or better recommended) better
2 GHz Pentium 4 or 3 GHz Pentium 4 or
CPU
RAM
better
128 MB minimum (512 MB minimum for Windows Vista)
512 MB or better
2 GB or better
1 GB or better
15 GB or better
Hard disk
space
Amount required for installation: 450 MB minimum
Amount required for operation: 600 MB minimum
Display
800 × 600 pixels or better, 16-bit color or better
1024 × 768 pixels or better, Highest (32 bit)
*
1 Models with one of the above operating systems pre-installed.
*2 When you install the software, login using a system administrator account (e.g. “Administrator”).
CAUTION
• Note that the software to be installed is different depending on the OS. (Windows 98SE/Me: FinePixViewer, Windows 2000/XP/
Vista: FinePixViewer S)
• Additional USB interface board is not guaranteed.
• Windows 95, Windows NT and Windows 98 cannot be used.
• Operation is not guaranteed on home-built PCs or on PCs running updated operating system software.
92
Download from Www.Somanuals.com. All Manuals Search And Download.
Do not connect the camera to your PC
until the software installation is
completed.
For Windows Vista users:
When loading the bundled CD-ROM on your PC, the
[AutoPlay] window may appear. In this case, click
[SETUP.exe].
1 Install FinePixViewer as instructed by the
When [User Account Control] window appears, click
[Allow].
on-screen instructions.
2 Install DirectX as directed by the on-screen
instructions and then restart your PC. If the
latest version of DirectX is already installed
on your PC, this installation is not
performed.
Launching the installer manually
A Double-click the [My Computer] icon.
Windows XP users should click [My Computer] in the [Start]
menu.
*
Windows Vista users should click [Computer] in the [Start]
menu.
B Right-click [FINEPIX] (CD-ROM drive) in the [My
Computer] window (Windows Vista users: in the
[Computer] window) and select [Open].
C Double-click [SETUP] or [SETUP.exe] in the CD-ROM
window.
CAUTION
• If the latest version of DirectX or Windows Media Player
has not been installed, each software will be installed,
and then the PC will restart.
• Do not remove the CD-ROM during this procedure.
3 After restarting the PC, a message appears
stating [Installation of the FinePixViewer
has been completed]. Remove the CD-ROM
from your PC.
The way file names are displayed differs as described below
depending on your PC settings.
*
-File extensions (3-letter suffixes indicating the file type)
may be shown or hidden. (e.g. Setup.exe or Setup)
-Text may be shown normally or all in uppercase (e.g. Setup
or SETUP).
93
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation on a Mac OS X
Pre-installation checklist
Z Hardware and software requirements
To run this software, you must have the hardware and software described below. Check your system before you begin the
installation.
2
Power Macintosh G3 2, PowerBook G3
Power Macintosh G4, iMac, iBook,
,
*
*
1
Compatible Mac
*
Power Macintosh G4 Cube, PowerBook G4, Power Macintosh G5, MacBook,
MacBook Pro or Mac Mini
Operating System
RAM
Mac OS X (compatible with version 10.3.9 to 10.4.10)
256 MB or better recommended
Amount required for installation: 200 MB minimum
Amount required for operation: 400 MB minimum
Hard disk space
Display
800 × 600 pixels or better, at least 32,000 colors
• To use the FinePix Internet Service or mail attachment function:
An Internet connection or e-mail transmission software is needed
• Connection speed: 56 kbps or better recommended
3
Internet connection
*
*1 PowerPC, Intel processor loaded
*2 Models with a USB port as a standard feature
*3 Required to use the FinePix Internet Service. The software can still be installed even if you do not have an Internet
connection.
CAUTION
• Connect the camera directly to the Macintosh using the USB cable. The software may not operate correctly if you use an extension
cable or connect the camera via a USB hub.
• Push the USB connector fully into the socket to ensure that it is securely connected. The software may not operate correctly if the
connection is faulty.
• Additional USB interface board is not guaranteed.
94
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTION
1 Turn your Macintosh on and start up Mac
For more information on what is installed, click the [Read
Me First] button and [Using FinePixViewer] button.
OS X. Do not launch any other applications.
2 When the bundled CD-ROM is loaded into
the CD-ROM drive, the [FinePix] icon
appears. Double-click the [FinePix] icon to
open the [FinePix] volume window.
5 The [Authenticate] dialog appears.
Enter the name and password for the
administrator account and then click the
[OK] button.*
The administrator account is the user account used for
Mac OS X installation and you can confirm the user
account in the Accounts dialog in the System
Preferences.
*
3 Double-click on [Installer for MacOSX].
4 The Installer setup dialog appears. Click the
[Installing FinePixViewer] button.
6 Install FinePixViewer as directed by the on-
screen instructions.
7 The [FinePixViewer installation completed]
message dialog appears. Then click exit
button and close it.
CAUTION
When Safari is used as the Web browser, a message may
be displayed and the CD-ROM may not be removed. If
this happens, click the Safari icon in the Dock to make
Safari the active application and then select [Quit Safari]
in the [Safari] menu to shut down Safari.
8 Launch [Image Capture] from the
[Applications] folder.
Continued Q
95
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation on a Mac OS X
9 Change the Image Capture settings.
Select [Preferences...] from the [Image
Capture] menu.
10 Select [Other...] from [When a camera is
connected, open].
11 Select [FPVBridge] from [FinePixViewer]
folder in the [Applications] folder and click
the [Open] button.
12 Select [Quit Image Capture] menu in the
[Image Capture] menu.
96
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to a PC
By connecting the camera to a PC, your system can be
expanded to fill a wide range of uses. Using
“FinePixViewer” performs images saving, browsing and
file management etc.
CAUTION
• Do not format the Memory Card in the camera on the
PC.
• Use the Memory Card with images taken by a
FUJIFILM Digital camera.
FinePixViewer Overview
BConnect the camera to your PC using the USB cable.
Enables importing images, managing files and folders,
and ordering prints using the internet (only Windows
users).
; USB socket
CAUTION
The Windows CD-ROM may also be required during
installation. In this event, change CD-ROMs as directed
by the on-screen instructions.
Refer to Software
Installation (➝p.92, 94)
the first time you connect
the camera to your PC.
Install the software first. Do
not connect the camera to
the PC before installing all
the software.
CD-ROM
(Software for FinePix)
CPress w for about 1 second to turn the camera on in
Playback mode.
AInsert the Memory Card with images into the camera
(➝p.16).
DSet your PC.
You can use the xD-Picture Card and the SD
Memory Card with the FinePix J10 / FinePix J12. In
this Owner’s Manual, these cards are expressed as
“Memory Card”.
MEMO
In Windows, if FinePixViewer is already installed, the
driver will be set automatically. No action is required.
Continued Q
97
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to a PC
CAUTION
CAUTION
• FinePix J10 / FinePix J12 is compatible with PTP
(Picture Transfer Protocol)/MTP (Media Transfer
Protocol). A PTP/MTP-compatible camera is a camera
that can recognize the PC and printer automatically
when connected.
• Do not disconnect the USB cable (included) when the
camera is communicating with a PC. If the USB cable
(included) is disconnected during communication, the
files on the Memory Card or internal memory may be
damaged.
• Always use a fully charged battery. If the camera
suddenly loses power during data exchange, the
Memory Card or internal memory could be damaged.
• Make sure that the USB cable (included) is connected
correctly and securely.
• Connect the camera directly to the PC using the USB
cable (included). The software may not operate
correctly when you use an extension cable, or if you
connect the camera via a USB hub.
• When your PC has more than one USB port, the
camera can be connected to either port.
• In Mac OS X, you must set automatic setup the first time
you connect the camera to your PC.
• When Windows 98 SE is used, the supplied software
must be installed first before connecting the camera to
a PC using the USB cable. The PC will not recognize
the camera if it is connected before installation.
• A memory Card, the internal memory, data in a Memory
Card or data in the internal memory could be damaged
if any of the following are performed;
- the USB cable is disconnected
- power switch or buttons are pressed, or the lens cover
is interfered with
• When the camera and PC are exchanging data, the
indicator lamp blinks alternately green and orange.
• Auto power off is disabled during USB connection.
• Before replacing the Memory Card, always disconnect
the camera from the PC.
• The camera and PC may be exchanging data even
when [Copying] disappears from your PC screen.
Before disconnecting the USB cable (included), always
check that the indicator lamp is off.
• Always use FinePixViewer to transfer images with voice
memos to a PC.
• The cost of an Internet provider for connecting to the
internet is the user’s responsibility.
• When using FinePixViewer to save images on a data
server (network), FinePixViewer may not run as it would
in a standalone PC environment.
98
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMO
The following steps differ depending on the
PC’s operating system (Windows 2000/XP/
Vista case)
When your PC recognizes the camera automatically,
FinePixViewer S automatically starts up and the Load
photos window appears. Follow the instructions provided
on screen to save the images. To proceed without saving
the images, click the [Menu] button.
• You can only see images saved on a PC. Save images
on a PC.
• If you cancel saving by clicking the [Cancel] button,
press ON/OFF to turn off the camera and then
disconnect it from the PC.
• When the camera is connected to your PC,
FinePixViewer automatically starts up by the function of
Exif Launcher, which is installed in FinePixViewer.
CAUTION
Proceed to “Using FinePixViewer” (➝p.100).
When there are many images stored on a Memory Card,
it takes a while to display on the screen of your PC. Also,
it may take a while to import images or you may be unable
to save images. In this case, use an Image Memory Card
Reader.
CAUTION (Mac OS X)
If FinePixViewer does not start up automatically, the
software may not be installed correctly. Set your PC again
after disconnecting the camera and restart.
CAUTION (Mac OS X)
Note on disconnecting the camera
• Close all files in the camera, and make sure the camera
is not exchanging data.
• The camera and PC may be exchanging data even
when [Copying] disappears from your PC screen,
especially in the case of copying large data amounts.
Do not disconnect the USB cable (included),
immediately after this message has disappeared.
Always check that the indicator lamp is off first before
disconnecting.
99
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to a PC
Using FinePixViewer
Uninstalling the software
Only perform this operation when you no longer require
the installed software or when the software was not
installed correctly.
Mastering FinePixViewer
For all information on FinePixViewer functions, refer to
[How to Use FinePixViewer] in the Help menu for details.
Windows
ACheck that the camera is not connected to the PC.
• What is explained in [How to Use FinePixViewer]...
[How to Use FinePixViewer] covers a range of topics,
including batch processing and ordering prints.
BQuit all currently running applications.
CThe steps for uninstalling software differ depending on
the operating system. Follow the steps for each
operating system to uninstall the software listed below.
Example: Looking up slide shows
AClick [How to Use FinePixViewer] in the FinePixViewer
Help menu.
The following software is to be uninstalled:
For Windows 98 SE/Me users
• FinePixViewer
BClick [Basic Operation] and then click [Slide Show] in
the menu that appears.
• FinePix Resource
For Windows 2000/XP/Vista users
• FinePixViewer S
CThe [Slide Show] information appears. Press the [<<<]
key to view the previous page or the [>>>] key to view
the next page.
To remove FinePixViewer
To remove the driver
software
100
Download from Www.Somanuals.com. All Manuals Search And Download.
DWhen the message appears, click the [OK] button.
Check your selection carefully since the process
cannot be canceled once you click the [OK] button.
Macintosh
Quit FinePixViewer. Then drag the installed
FinePixViewer folder to the Trash and select [Empty
Trash] in the [Finder] menu.
101
Download from Www.Somanuals.com. All Manuals Search And Download.
System Expansion Option
By using FinePix J10 / FinePix J12 together with other optional FUJIFILM products, your system can be expanded to fill a wide
range of uses. Accessory availability may vary by country. Please check with your local Fujifilm representative to confirm
product availability.
Z Image input/output to the PC
USB
Z Aouutdpiuot/*Visual
TV monitor
(commercially available)
Personal Computer
(commercially available)
Audio/Visual
output*
PC Card Adapter DPC-AD
Z Printing
(PC card slot)
USB
This will not work with an
SD Memory Card.
*
SD/SDHC
xD-Picture
Memory Card Card
PictBridge-compatible
Printer
(commercially available)
D
P
C
-C
F
CompactFlash™
Card Adapter DPC-CF
C
O
M
R
P
A
C
A
A
C
T
F
P
D
L
A
E
D
A
S
H
TM
T
R
fo
C
r
xD
-P
ic
tu
ar
Printer
(commercially available)
d
(CF card slot)
This will not work with an SD
Memory Card.
*
102
Download from Www.Somanuals.com. All Manuals Search And Download.
Accessories Guide
Visit the FUJIFILM web site for the latest information on camera accessories.
http://www.fujifilm.com/products/digital_cameras/index.html
Accessory availability may vary by country. Please check with your local Fujifilm representative to confirm product availability.
• xD-Picture Card
Use the following xD-Picture Cards:
16MB/32MB/64MB/256MB/512MB/1GB/2GB
There are two types of xD-Picture Card: standard type and Type M (containing “M” in the model
number, such as DPC-M2GB).
FinePix J10 / FinePix J12 is compatible with Type M, however they may not be compatible depending
on the device used (Image Memory Card Reader, etc.).
• Battery Charger BC-45
Quickly charges the rechargeable battery. The BC-45 reduces charging time to approx.
140 minutes at +23°C (for the NP-45). Use the Battery adapter when the NP-45 is being
charged. The battery adapter is supplied with the BC-45.
• Rechargeable Battery NP-45
A Lithium-ion large capacity rechargeable battery.
• PC Card Adapter DPC-AD
The PC Card Adapter allows the xD-Picture Card and SmartMedia to be used as a PC Card Standard
ATA-compliant (PCMCIA 2.1) PC card (Type u).
- Compatible with xD-Picture Card of 16 MB to 512 MB, and SmartMedia of 3.3 V, 2 MB to 128 MB.
This is not compatible with the SD Memory Card.
Continued Q
103
Download from Www.Somanuals.com. All Manuals Search And Download.
Accessories Guide
• CompactFlash™ Card Adapter DPC-CF
D
P
C
-C
F
Loading an xD-Picture Card into this adapter allows you to use the card as a CompactFlash card (Type
C
O
M
R
P
A
C
A
D
A
C
A
T
F
P
D
L
A
E
s).
S
H
T
M
T
R
fo
r
xD
-P
ic
tu
re
a
- This is not compatible with the SD Memory Card.
rd
104
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Your Camera Correctly
Read this information and the “Safety Notes” (➝“Notes
and Cautions”), to make sure you use your camera
correctly.
Z When the Camera is Not Used or is stored Periods
of Time
If you do not intend to use the camera for a long period of
time, remove the battery and the Memory Card.
Z Places to Avoid
Do not store or use the camera in the following types of
locations:
• In the rain or in very humid, dirty, or dusty places
• In direct sunlight or in places subject to extreme
temperature rises, such as in a closed car in summer
• Extremely cold places
• Places with strong vibration
• Places with smoke or steam
• Places subject to strong electric magnetic fields (such
as near broadcasting tower, power lines, radar, motors,
transformers, magnets, etc.)
Z Cleaning Your Camera
• Use a blower brush to remove any dust on the lens or
LCD monitor, and then gently wipe the camera with a
soft, dry cloth. If any soil remains, apply a small amount
of lens cleaning liquid to a piece of FUJIFILM lens
cleaning paper and wipe gently.
• Do not scratch hard objects against the lens or LCD
monitor.
• Clean the body of the camera with a soft, dry cloth. Do
not use volatile substances or cleaning products these
items can cause damage.
• In contact with chemicals such as pesticides
• Next to rubber or vinyl products
Z Using the Camera When Traveling
When traveling overseas, do not place your camera in the
check-in baggage. Baggage can be subjected to violent
shocks, and the camera may be damaged inside or
outside.
Z Damaged by Water or Sand
FinePix J10 / FinePix J12 can be damaged on the inside
and outside by water and sand. When you are at the
beach or close to water, make sure that the camera is not
damaged by water or sand. Take care not to place the
camera on a wet surface.
Z Damaged by Condensation
If the camera is carried from a cold location into a warm
place, water droplets (condensation) may form on the
inside of the camera or on the lens. When this occurs, turn
the camera off and wait an hour before using the camera.
Condensation may also form on the Memory Card. In this
event, remove the Memory Card and wait a short time.
105
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes on the xD-Picture Card™, the SD Memory Card and the Internal Memory
Z Handling Memory Card
Z Internal Memory
• When inserting the Memory Card into the camera, hold
the Memory Card straight as you push it in.
• Never remove the Memory Card or turn the camera off
during data recording or erasing (Memory Card
formatting) as this could be damaged to the Memory
Card.
• Images held in the camera’s internal memory may be
corrupted or erased due to problems such as camera
faults. Save your important data to another media (i.e.,
DVD-R, CD-R, CD-RW, hard disk, etc.).
• Data stored in the camera’s internal memory cannot be
guaranteed in the event that the camera is submitted for
repairs.
• The use of xD-Picture Cards is recommended with
FinePix J10 / FinePix J12.
• When the camera is repaired, any data stored in the
camera’s internal memory is subject to checking by the
repairer.
The recording quality cannot be guaranteed when xD-
Picture Cards other than those manufactured by
FUJIFILM are used.
• The Memory Card may feel warm when it is removed
from the camera after taking pictures. This is normal.
• Do not put labels on the Memory Card. Peeling labels
can cause the camera not to work properly.
Z Using Memory Card or Internal Memory with a PC
• When taking pictures using a Memory Card or internal
memory that has been used on a PC, reformat the
Memory Card using your camera.
• When formatting, a directory (folder) is created. Image
data is then recorded in this directory.
• Do not change or delete the directory (folder) or file
names on the Memory Card or internal memory
because this will make it impossible to use the Memory
Card or internal memory in your camera.
• Always use the camera to erase image data.
• To edit image data, copy or transfer the image data to
the PC and edit the copied or transferred data.
MEMO Type M and H of xD-Picture Card
• Type M
There are two types of Memory Card: standard type and
Type M (containing “M” in the model number, such as
DPC-M2GB).
FinePix J10 / FinePix J12 is compatible with Type M.
• Type H
Type H and M share the same compatibility.
• Usable USB drive
Type H cannot be used with xD-Picture Card USB
drive DPC-UD1, while Type M can.
106
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning Displays
The table below lists the warnings that are displayed on the LCD monitor.
Warning Displayed
Explanation
Remedy
(Lit red)
The batteries are low or completely out of charge.
Load new or fully charged batteries.
V (Blinking red)
There is a strong likelihood of camera shake
because the shutter speed is slow.
Use flash photography. A tripod may be
recommended, depending on the scene and mode.
|
{
}
The AF (autofocus) cannot work effectively.
• If the image is too dark, take the picture at a
distance of around 2 m (6.6 ft.) from the subject.
• Use AF lock to take the picture (➝p.29).
• Select Macro mode when taking close-up shots.
The camera cannot shoot the picture at the correct The picture can be taken, but the correct brightness
brightness due to too bright or dark shooting
condition.
(exposure) will not be obtained.
Camera malfunction or fault.
• Turn the camera on again, taking care not to touch
the lens.
• Turn the camera off and on again. If the message
still appears, contact your FUJIFILM dealer.
[FOCUS ERROR]
[ZOOM ERROR]
Memory Card is not inserted when transferring
images.
Insert a Memory Card.
[NO CARD]
• The Memory Card or internal memory is not
formatted.
• The Memory Card was formatted on a PC.
• The Memory Card contact area is soiled.
• Format the Memory Card or internal memory on
the camera (➝p.84).
• Format the Memory Card on the camera.
• Wipe the contact area on the Memory Card with a
soft, dry cloth. It may be necessary to format the
Memory Card (➝p.84). If the message still
appears, replace the Memory Card.
[CARD NOT
INITIALIZED]
• Camera fault.
• Contact your FUJIFILM dealer.
Continued Q
107
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning Displays
Warning Displayed
Explanation
Remedy
• The Memory Card contact area is soiled.
• The Memory Card format is incorrect.
• Wipe the contact area on the Memory Card with a
soft, dry cloth. It may be necessary to format the
Memory Card (➝p.84). If the message still
appears, replace the Memory Card.
[CARD ERROR]
• Camera fault.
• Contact your FUJIFILM dealer.
• The Memory Card is damaged.
• Inserted Memory Card is not compatible with your • Insert a compatible Memory Card that is operation-
camera.
checked at FUJIFILM Corporation (➝p.16).
[\ MEMORY FULL]
[Y MEMORY FULL]
The internal memory or Memory Card is full.
Erase some images in internal memory or Memory
Card (➝p.36), or use a Memory Card that has ample
free space.
• The data could not be recorded due to a Memory • Re-insert the Memory Card or turn the camera off
Card error or a connection error between the
Memory Card and camera.
and then on again. If the message still appears,
contact your FUJIFILM dealer.
[WRITE ERROR]
• The image cannot be recorded as it is too large to • Use a new Memory Card.
fit in the available space on the Memory Card.
• The Memory Card or internal memory is not
formatted.
• Format the Memory Card or internal memory on
the camera (➝p.84).
The SD Memory Card switch is slide to the “Lock”
side.
Unlock the protection by sliding it back (➝p.17).
[PROTECTED CARD]
[INTERNAL MEMORY IS The data could not be recorded or copied since the Erase some images from the internal memory
FULL
internal memory is full.
(➝p.36), or use a Memory Card that has ample free
space.
INSERT A NEW CARD]
The timing for recording was incorrect because the Use a Memory Card that was formatted on the
[BUSY]
Memory Card was formatted on a PC.
camera.
The frame number has reached 999-9999.
A Insert a formatted Memory Card into the camera.
B Set [RENEW] as the [FRAME NO.] setting in the
[
SET-UP] menu (➝p.81).
[FRAME NO. FULL]
C Start taking pictures (The frame number starts
from “100-0001”).
D Set [CONT.] as the [FRAME NO.] setting in the
[
SET-UP] menu.
108
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning Displayed
Explanation
Remedy
An attempt was made to show 5,000 or more image No more than 4,999 images can be shown by date
[TOO MANY FRAMES]
by date sorting.
sorting.
• An attempt was made to erase a protected file.
• Protected files cannot be erased. Remove the
protection (➝p.66).
[PROTECTED FRAME]
• An attempt was made to rotate a protected file.
• Protected files cannot be rotated. Remove the
protection (➝p.66).
• The played back file was not recorded correctly.
• The Memory Card contact area is soiled.
• This file cannot be played back.
• Wipe the contact area on the Memory Card with a
soft, dry cloth. It may be necessary to format the
Memory Card (➝p.84). If the message still
appears, replace the Memory Card.
[READ ERROR]
• Camera fault.
• Contact your FUJIFILM dealer.
• An attempt was made to play back the image or the • The movie and image cannot be played back.
movie that was not recorded on this camera.
[\ NO IMAGE]
An attempt was made to transfer images from the
Memory Card or internal memory that memory was
empty.
It is impossible to copy.
[Y NO IMAGE]
[` CAN NOT TRIM]
An attempt was made to trim a 0.3M image.
The image cannot be trimmed.
• An attempt was made to trim an image shot using The image cannot be trimmed.
a camera other than FinePix J10 / FinePix J12.
[CAN NOT TRIM]
• The image is damaged.
Prints were specified for 1000 or more frames in the The maximum number of frames for which prints can
DPOF frame settings.
be specified on the same Memory Card is 999.
Copy the images for which you want to order prints
onto another Memory Card and then specify the
DPOF settings.
[DPOF FILE ERROR]
[CAN NOT SET DPOF] An attempt was made to specify DPOF settings for a DPOF printing cannot be used with this image
movie or an image that is not supported by DPOF. format.
[r CAN NOT SET
DPOF]
Continued Q
109
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning Displays
Warning Displayed
Explanation
Remedy
An attempt was made to rotate a movie or an image These images cannot be rotated by image formats.
shot using a camera other than FinePix J10 / FinePix
J12.
[CAN NOT ROTATE]
[r CAN NOT ROTATE]
[COMMUNICATION
ERROR]
The camera is not connected to a PC or printer.
• Check that the USB cable is connected correctly.
• Check that your PC or printer is turned on.
Displayed for PictBridge.
• Check that the printer is not out of paper or out of
ink.
[PRINTER ERROR]
• Turn the printer off briefly and then turn it back on.
• Refer to the user manual supplied with your
printer.
Displayed for PictBridge.
Displayed for PictBridge.
Check that the printer is not out of paper or out of ink.
Printing automatically restarts when the error is
cleared. If the message still appears after checking,
press MENU/OK to restart printing.
[PRINTER ERROR
RESUME?]
• Refer to the user manual for the printer being used
and check whether the printer supports the JFIF-
JPEG or Exif-JPEG image format. If not, the printer
cannot print the images.
[CANNOT BE PRINTED]
• Movie images cannot be printed.
• Was the image data photographed using FinePix
J10 / FinePix J12?
You may not be able to print some images
photographed on other cameras.
110
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Z Getting ready
Matters
Problems
Possible causes
The batteries have run out.
Solutions
Page
12, 22
14
Load fully charged batteries.
Nothing happens
when pressing
ON/OFF.
The batteries are loaded backward.
Load the batteries in the correct direction.
The battery cover is not closed securely. Close the battery cover securely.
14
Camera is used in extremely cold
conditions.
Put the batteries in your pocket or another
warm place to heat it and then load it into 12, 22
the camera just before you take a picture.
Batteries and
power supply
Batteries run out
quickly.
The battery terminals are soiled.
Wipe the battery terminals with a clean,
dry cloth.
22
Same batterieshave been used for a long The batteries can no longer be recharged.
12, 22
period.
Load new batteries.
Power cuts out
during operation.
The batteries have run out.
Load fully charged batteries.
12, 22
14
The battery is loaded backward.
Load the battery in the correct direction.
The battery charger and connection cord Connect the battery charger and
14
are not connected correctly.
connection cord correctly.
Chargingdoes not
begin.
The battery terminals are soiled.
Take the battery out briefly and wipe the
battery terminals with a clean, dry cloth
before reloading it.
Charging a battery
–
–
The battery can no longer be recharged. Load a new battery. If the battery still fails
to charge, contact your FUJIFILM dealer.
Z Setting menu etc.
Matters
Problems
Possible causes
Solutions
Page
Screens are not
displayed in
English.
A language other than English is selected Select [ENGLISH].
LCD monitor
display
in the [
] setting in the [SET-
24
UP] menu.
Continued Q
111
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Z Shooting
Matters
Problems
Possible causes
Solutions
Page
The Memory Card or internal memory is Insert a new Memory Card or erase some
full. unnecessary frames.
16, 36
The Memory Card or internal memory is Format the Memory Card or internal
not formatted. memory on the camera.
78, 84
16
No photograph is
taken when
pressing the
The Memory Card contact area is soiled. Wipe the Memory Card contact area with
a soft, dry cloth.
shutter button.
Basic operations
The Memory Card is damaged.
The batteries have run out.
Insert a new Memory Card.
Load fully charged batteries.
Turn the camera on.
16
12, 22
The Auto power off function has turned
the camera off.
19, 85
49
The LCD monitor You took pictures with flash.
darkens after
The LCD monitor may darken for charging
flash. Wait a short time.
taking a picture.
You took a close-up shot without selecting Select Macro mode.
Macro mode.
47
47
29
Camera has
difficulty in
focusing on the
subject.
You photographed scenery with Macro
mode selected.
Cancel Macro mode.
Focusing
Macro
You are shooting a subject that is not
Use AF/AE lock to take the picture.
suited to autofocusing (➝p.30).
Cannot set the
camera to Macro 8,
The Shooting mode is set to m, ,, ., Change the Shooting mode.
,
,
,
, or
.
41
(close-up) mode.
112
Download from Www.Somanuals.com. All Manuals Search And Download.
Matters
Problems
Possible causes
Solutions
Page
The shutter button was pressed while the Wait until the charging is completed
49
flash was charging.
before pressing the shutter button.
Change the Shooting mode.
The Shooting mode is set to
, ,,
,
,
41
12, 22
48
Cannot use the
flash.
,
, or
.
The batteries have run out.
Load fully charged batteries.
The flash is set to [C SUPPRESSED
FLASH] mode.
Set to another flash mode excluding the
[C SUPPRESSED FLASH] mode.
Flash
The flash settings The Shooting mode is set to AUTO,
,
The flash settings are restricted because
the camera settings are tailored to the
scene being shot. Change the Shooting
mode for a wider range of flash settings.
are restricted and
cannot be
selected.
, ,, ., 8,
or
,
,
,
,
,
41, 49
47, 49
,
.
The playback
image is dark
even though the
flash was used.
The subject is too far away.
Move to within the effective flash range
before taking the picture.
Your finger was covering the flash.
Hold the camera correctly.
Clean the lens.
25
–
The lens is dirty.
{ appeared when taking pictures.
Check the focus on the subject and take 26, 29,
The image is
blurred.
pictures.
107
Photographed
images
| appeared when taking pictures.
It may cause camera shake. Hold the
camera steadily.
27, 107
The picture was taken with a slow shutter This is a characteristic of CCDs and does
There is speckling
on the image.
speed (long exposure) in a high-
temperature environment.
not indicate a camera fault.
–
Continued Q
113
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Z Playing back
Matters
Problems
Possible causes
Solutions
Adjust the volume.
Page
The camera volume is set too low.
77, 83
The camera does The microphone was blocked during
Take care not to block the microphone
during shooting/recording.
Playing back
movie
10, 74
10, 77
not emit any
sound.
shooting/recording.
There is something covering the speaker Make sure that the speaker is uncovered.
during playback.
Erasing [FRAME] Some frames may be protected.
doesnot erasethe
frame.
Unprotect frames using the camera on
which the protection was first applied.
Erasing
66
19
Erasing [ALL
FRAMES] does
not erase all the
frames.
You opened the battery cover without
[CONT.] in the
frame number
setting does not
function.
Always turn the camera off when
turning the camera off when replacing the replacing the batteries or Memory Card.
Frame No.
batteries or Memory Card.
Opening the battery cover without turning
the camera off may cause the frame
number memory to not function.
114
Download from Www.Somanuals.com. All Manuals Search And Download.
Z Connecting
Matters
Problems
Possible causes
Solutions
Page
The camera is not connected to the TV
correctly.
Connect the camera and TV correctly.
87
Theincluded video cable or A/V cable was After the movie playback mode is
connected during movie playback.
stopped, connect the camera and TV
correctly.
76, 87
There is no image
or sound on the
TV.
Connecting to TV
“TV” is selected as the TV input.
The video output setting is incorrect.
The TV volume is turned down.
Set the TV input to “VIDEO”.
Change the setting to [NTSC] or [PAL].
Adjust the volume.
–
78, 80
–
The TV image is The video output setting is incorrect.
black and white.
Change the setting to [NTSC] or [PAL].
78, 80
97
PC does not
The USB cable is not correctly connected Set up the camera, and connect the USB
Connecting to PC recognize the
camera.
to the PC or camera.
cable correctly.
• The USB cable is not correctly
connected to the printer or camera.
• The printer is not turned on.
• Set up the camera, and connect the
USB cable correctly.
• Turn the printer on.
Connecting to
printer
Cannot print with
PictBridge.
88
Continued Q
115
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Z Others
Matters
Problems
Possible causes
Solutions
Page
Nothing happens Camera malfunction may be caused
when pressing the temporarily.
Briefly remove the battery. Then reload
the battery and try again.
12, 22
buttons on the
The batteries have run out.
camera.
Load fully charged battery.
12, 22
Camera operation
etc.
Camera malfunction may be caused
Briefly remove the battery. Then reload
the battery and try again. If you think the 12, 14,
camera is faulty, contact your FUJIFILM
dealer.
The camera no
temporarily.
longer works
22
correctly.
116
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
System
Model
Digital camera FinePix J10 / FinePix J12
8.15 million pixels
Effective pixels
CCD
1/2.5-inch
Storage media
Internal memory (approx. 8 MB)/xD-Picture Card (16/32/64/128/256/512 MB/1 GB/2 GB)
/SD/SDHC Memory Card (FUJIFILM recommendation (➝p.16))
File format
Still image: DCF-compliant
Compressed: Exif ver.2.2 JPEG, DPOF-compatible
Design rule for Camera File System compliant/DPOF compatible
Movie: AVI format, Motion JPEG
Audio: Monaural sound
*
Number of recorded pixels Still image:
3264 × 2448 pixels/3264 × 2176 pixels/
2304 × 1728 pixels/1600 × 1200 pixels/
640 × 480 pixels (i/%/4/2/`)
File size
Lens
See the table on the p.122
3× optical zoom lens
F2.8 (Wide-angle)-F5.2 (Telephoto)
Focal length
f=6.2 mm-18.6 mm
(Equivalent to approx. 38 mm-113 mm on a 35 mm camera)
Continued Q
117
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
System
Digital zoom
Aperture
Approx. 5.1× (3× optical zoom lens is used together: Max. zoom scale: approx. 15.3×)
F2.8-F5.6 (Wide-angle)
F5.2-F10.4 (Telephoto)
Focal range
(from lens surface)
Normal: approx. 40 cm (1.3 ft.) to infinity
Macro: wide-angle: approx. 15 cm (5.9 in.) to infinity
telephoto: approx. 40 cm (1.3 ft.) to infinity
Sensitivity
[AUTO]/Equivalent to ISO [64]/[100]/[200]/[400]/[800]/[1600] (Standard output sensitivity)
Photometry
TTL 256-zones metering
Program AE
Exposure control
Scene position
([BABY MODE])/
8 ([NIGHT])/ ([NATURAL LIGHT])/
([SUNSET])/ ([FLOWER])/ ([PARTY])/
([ANTI-BLUR])/m ([PORTRAIT])/, ([LANDSCAPE])/. ([SPORT])/
([BEACH])/ ([SNOW])/ ([FIREWORKS])/
([MUSEUM])/ ([TEXT])
Exposure compensation
Shutter speed
–2 EV to +2 EV in 1/3 EV-step increments (s)
1/4 sec. to 1/2000 sec.* (AUTO)
8 sec. to 1/2000 sec.* (throughout all shooting mode)
* depend on Exposure mode
Continuous shooting
Focus
Number of recorded frames: up to 3 frames (approx. 1 frame/sec.)
Mode: Single-AF
AF system: TTL contrast-type
AF frame selection: [CENTER]
118
Download from Www.Somanuals.com. All Manuals Search And Download.
System
White balance
Automatic scene recognition/Preset (Fine, Shade, Fluorescent (Daylight), Fluorescent (Warm White),
Fluorescent (Cool White), Incandescent light)
Self-timer
Flash type
Approx. 2 sec./10 sec.
Auto flash
Effective range: ( : AUTO)
Wide-angle: approx. 50 cm-4.0 m (1.6 ft.-13.1 ft.)
Telephoto: approx. 50 cm-2.2 m (1.6 ft.-7.2 ft.)
Macro: approx. 30 cm-80 cm (11.8 in.-2.6 ft.)
Flash mode
LCD monitor
Auto, Red-eye Reduction, Forced Flash, Suppressed Flash, Slow Synchro, Red-eye Reduction + Slow Synchro
2.5 inches, Aspect ratio: 4:3; approx. 153,000 dots Amorphous silicon TFT color LCD monitor, Approx.
96% coverage
Movie
640 × 480 pixels (%) / 320 × 240 pixels ($)
(30 frames per second with monaural sound)
A movie recording will stop automatically when a movie file becomes approx. 2GB. If you want to
continue recording, press the shutter button again. The available recording time is displayed based on
approx. 2GB. Zoom cannot be used during movie recording.
Photography functions
Playback functions
Other functions
Best framing, Frame NO. memory
Trimming, Slide show, Multi-frame playback, Sorting by date, Image rotate
PictBridge, Exif print, Language (
, English, Francais, Deutsch, Español, Italiano,
,
,
,
, Português, Nederlands, , Magyar, Polski, Svenska), Time difference
,
Input/Output Terminal
A/V OUT (Audio/Visual
output)
NTSC/PAL-type (with monaural sound)
Digital input/output
USB, PTP (Picture Transfer Protocol)/MTP (Media Transfer Protocol)
Power Supply and Others
Power supply
Rechargeable Battery NP-45
Continued Q
119
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Power Supply and Others
Guide to the number of
available frames for battery
operation
Battery Type
Number of frames
NP-45
Approx. 150 frames
According to the CIPA (Camera & Imaging Products Association) standard procedure for measuring
digital still camera battery consumption (extract):
When using a battery, use the battery supplied with the camera. The storage media should be
xD-Picture Card.
Pictures should be taken at a temperature of +23°C (+73°F), with the LCD monitor turned on, the optical
zoom moved from full wide-angle to full telephoto (or vice-versa) and back again to its original position
every 30 seconds, the flash used at full power every second shot and the camera turned off and then on
again once every 10 shots.
• Note: Because the number of available shots varies depending on the level of charge in the battery,
the figures shown here for the number of available shots using the battery is not guaranteed.
The number of available shots will also decline at low temperatures.
Camera dimensions
(W/H/D)
91.0 mm × 55.0 mm × 22.0 mm/3.6 in. × 2.2 in. × 0.9 in. (not including accessories and attachments)
Camera mass (weight)
Approx. 110 g/3.9 oz. (not including accessories, battery and Memory Card)
Approx. 126.5 g/4.5 oz. (including battery and Memory Card)
Weight for photography
Temperature: 0°C to +40°C (+32°F to +104°F)
80% humidity or less (no condensation)
Operating Conditions
120
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes on Using the Battery Charger
Battery NP-45
Nominal voltage
Nominal capacity
DC 3.7V
740 mAh
Use with the following power supply cord set:
Cord: UL Listed, Type SPT-2, No.18 AWG, rated 300V,
10A, minimum 4 ft (1.2m), maximum 10 ft (3m) long.
One end terminates in a molded-on, parallel-blade, (non-
polarized) attachment plug with a 7A, 125V (NEMA 1-
15P) configuration.
Operating temperature0°C to +40°C (+32°F to +104°F)
Dimensions
31 mm × 39.4 mm × 5.7 mm (1.2 in.
× 1.6 in. × 0.2 in.) (W × H × D)
• The battery and battery charger themselves will
become warm due to the power stored inside them. This
is normal and does not indicate a fault. Wherever
possible, use the battery charger in a well-ventilated
location.
Mass (Weight)
Approx. 15 g (0.5 oz.)
Battery Charger BC-45A
Rated input
110-240 V AC, 50/60 Hz
• There may be vibration noises from inside the battery
charger during use. This is normal and does not indicate
a fault.
• Do not use the battery charger to charge batteries other
than rechargeable battery NP-45.
• The battery charger could cause interference if placed
close to a radio during charging. In this event, move the
radio and charger further apart.
• Do not leave the battery charger in the following types
of locations:
Input capacity
9.0 VA (100 V)
10.8 VA (240 V)
Rated output
4.2 V DC, 550 mA
Applicable batteries Rechargeable Battery NP-45
Charging time
Dimensions
Approx. 100 minutes
Wall type: 101.7 mm × 56 mm × 20
mm (4.0 in. × 2.2 in. × 0.8 in.) (L × W
× D)
Cord type: 85 mm × 54 mm × 20 mm
(3.3 in. × 2.1 in. × 0.8 in.) (L × W × D)
• Extremely humidity or high temperatures, such as
close to a heating appliance or in direct sunlight
• Places with strong vibration
Mass (Weight)
Wall type: Approx. 66 g (2.3 oz.)
(excluding batteries)
Cord type: Approx. 56 g (2.0 oz.)
(excluding batteries)
• In very dusty places
• The battery charger accepts input voltages of 110-240
V AC at 50 or 60 Hz and can be used all over the world.
However, the shape of the plug and socket-outlet
depends on the country of use. Consult your travel
agent for details.
Operating
temperatures
0°C to + 40°C(+ 32°F to + 104°F)
Continued Q
121
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Z Standard number of available frames/recording time per xD-Picture Card , SD Memory Card and internal memory
The number of available frames and recording time is approximate. The actual number of frames and recording time varies
depending on the type of Memory Card or shooting conditions. Also, the number of frames and recording time displayed in the
LCD monitor may not decrease regularly.
%
(30 fps)
$
(30 fps)
Quality setting
i F
i N
%
4
2
`
Number of
recorded pixels
3264 × 2448
3264 × 2176 2304 × 1728 1600 × 1200
640 × 480
215 KB
35
640 × 480
–
320 × 240
–
Image data size
4.2 MB
1
2.3 MB
2
2.1 MB
3
1.0 MB
6
720 KB
10
Internal memory
(approx.8 MB)
4 sec.
9 sec.
16 MB
32 MB
64 MB
128 MB
256 MB
512 MB
1 GB
3
7
6
13
6
14
13
28
20
41
70
144
10 sec.
24 sec.
22 sec.
51 sec.
15
27
29
57
84
293
50 sec.
1.7 min.
3.6 min.
7.4 min.
14.9 min.
30.1 min.
60.3 min.
30
54
60
115
231
463
929
1860
169
339
680
1363
2728
591
1.7 min.
3.5 min.
7.0 min.
14.1 min.
28.3 min.
61
110
221
444
889
121
242
486
974
1186
2374
4757
9519
124
249
498
2 GB
512 MB
1 GB
120
241
483
214
430
861
235
471
943
449
900
659
1320
2643
2299
4607
9221
6.8 min.
13.7 min.
27.5 min.
14.5 min.
29.1 min.
58.4 min.
2 GB
1802
4 GB
8 GB
968
1725
3463
1890
3793
3609
7242
5293
18467
37056
55.1 min.*
117.0 min.*
234.9 min*
1924
10622
110.6 min.*
A movie recording will stop automatically when a movie file becomes approx. 2GB. If you want to continue recording, press
the shutter button again. The available recording time is displayed based on approx. 2GB.
*
122
Download from Www.Somanuals.com. All Manuals Search And Download.
If you shoot using the xD-Picture Cards with model numbers containing “M” such as DPC-M2GB, movie recording time may be
reduced if you repeatedly record and erase (frame erase) image files. In such a case, erase all frames or format the xD-Picture Card
before use. Back up important frames (files) onto your PC or another media.
These specifications are subject to change without notice. FUJIFILM shall not be held liable for damages resulting from
errors in this Owner’s Manual.
The LCD monitor on your digital camera is manufactured using advanced high-precision technology. Even so, small bright
points and anomalous colors (particularly around text) may appear on the monitor. These are normal display characteristics
and do not indicate a fault with the monitor. This phenomenon will not appear on the recorded image.
The operation error may be caused in a digital camera by the strong radio interference (i. e. electric fields, static electricity,
line noise, etc.).
*
*
*
*
Due to the nature of the lens, the edges of images may appear distorted. This is normal.
123
Download from Www.Somanuals.com. All Manuals Search And Download.
Explanation of Terms
EV
A number denotes Exposure Value. The EV is determined by the brightness of the subject and sensitivity (speed) of the film
or CCD. The number is larger for bright subjects and smaller for dark subjects. As the brightness of the subject changes, a
digital camera maintains the amount of light hitting the CCD at a constant level by adjusting the aperture and shutter speed.
When the amount of light striking the CCD doubles, the EV increases by 1. Likewise, when the light is halved, the EV decreases
by 1.
Frame rate (fps)
The frame rate refers to the number of images (frames) that are photographed or played back per second. For example, when
10 frames are continuously photographed in a 1-second interval, the frame rate is expressed as 10 fps.
For reference, TV images are displayed at 30 fps (NTSC).
JPEG
Joint Photographic Experts Group
A file format used for compressing and saving color images. The higher the compression rate, the greater the loss of quality in
the decompressed (restored) image.
Motion JPEG
A type of AVI (Audio Video Interleave) file format that handles images and sound as a single file. Images in the file are recorded
in JPEG format. Motion JPEG can be played back by QuickTime 3.0 or later.
Smear
A phenomenon specific to CCDs whereby white streaks appear on the image when there is a very strong light source, such as
the sun or reflected sunlight, in the photography screen.
White Balance
Whatever the kind of the light, the human eye adapts to it so that a white object still looks white. On the other hand, devices
such as digital cameras see a white subject as white by first adjusting the color balance to suit the color of the ambient light
around the subject. This adjustment is called matching the white balance.
Exif Print Format is a newly revised digital camera file format that contains a variety of shooting information for optimal printing.
124
Download from Www.Somanuals.com. All Manuals Search And Download.
FUJIFILM Digital Camera Worldwide Network
If you have technical questions or if you need repair service, ask the following local distributor.
Please present the warranty card and your purchase receipt when you ask for repairs. Refer to the warranty card for conditions of the warranty.
There is a case that repair and Technical support cannot be accepted for some models which your local distributor does not deal with.
These lists are subject to change without notice.
NORTH AMERICA
Canada
600 Suffolk Court Mississauga Ontario, L5R 4G4
TEL 1-866-818-FUJI (3854) http://www.fujihelp.ca
FUJIFILM Canada Inc.
Technical support
Repair service
600 Suffolk Court Mississauga Ontario, L5R 4G4
TEL 1-800-263-5018 FAX 1-905-755-2993 http://www.fujihelp.ca
U.S.A.
1100 King George Post Rd., Edison, NJ 08837
FUJIFILM U.S.A., Inc.
Technical support
Repair service
1100 King George Post Rd., Edison, NJ 08837
CENTRAL & SOUTH AMERICA
Argentina
Fondo de la Legua 936 San Isidro Pcia. de Buenos Aires
TEL +54-11-4836-1000 FAX +54-11-4836-1144
Imagen e informacion S.A.
Technical support &
Repair service
Bolivia
Calle H N.° 5 - Equipetrol Norte - Santa Cruz
Reifschneider Bolivia Ltda.
Technical support &
Repair service
Brazil
Av. Vereador José Diniz, 3400 - Campo Belo, Sào Paulo/SP
FUJIFILM do Brasil Ltda.
Technical support &
Repair service
Chile
Av. El Conquistador del Monte 5024, Huechuraba, Santiago, Chile
Reifschneider SA
Technical support &
Repair service
Colombia
Ecuador
Calle 44 N.° 13-43 Piso 2 Apartado 18001 - Bogotá
Animex de Colombia Ltda.
Technical support &
Repair service
Bolivar 5-69 y Hermano Miguel
TEL 593-72-835526 FAX 593-72-833157
Espacri Cia Ltda
Technical support &
Repair service
Continued Q
125
Download from Www.Somanuals.com. All Manuals Search And Download.
FUJIFILM Digital Camera Worldwide Network
Ecuador
Mexico
Simón Bolivar 5-69 y Hno. Miguel - Cuenca
Importaciones Espacri Cia. Ltda.
Technical support &
Repair service
Av. Ejercito Nacional 351, Col. Granada 11520 Mexico, D.F.
Fujifilm de Mexico, S.A. de C.V.
Technical support
Repair service
Av. Presidente Juarez 2007, Col. Tepetlacalco, 54090 Tlalnepantla, Edo. de
Mexico
Paraguay
Peru
Edificio Unitas 15 de Agosto 1035, Asunción
Errece S.R.L.
Technical support &
Repair service
Pablo Bermudez 111 Apartado 3794 - Esq. Arequipa - Lima 11
Procesos de Color S.A.
Technical support &
Repair service
Uruguay
Uruguay
Venezuela
Cuareim 1439, montevideo, Uruguay
Fotocamara S.R.L.
Technical support &
Repair service
Maldonado 1787 Montevideo- Uruguay
Kiel S.A.
Technical support &
Repair service
Av. Ppal Diego Cisneros Caracas Venezuela Edf Oficentro
C. Hellmund & Cia Sa
Technical support &
Repair service
EUROPE
Austria
Traviatagasse/Pfarrgasse, 1230 Vienna, Austria
TEL 0043 1 6162606/51 or 52 FAX 0043 1 6162606/58
Fuji Film Oesterreich
Technical support &
Repair service
Belgium
Croatia
20, Avenue Lavoisier, Wavre, 1300, Belgium
Belgian Fuji Agency
Technical support &
Repair service
Hondlova 2, Zagreb, Croatia
I&I d.o.o.
Technical support
Repair service
Hondlova 2, Zagreb, Croatia
Cyprus
11, Dighenis Akritas Avenue, P.O.BOX 22315, 1586 Nicosia
PMS IMAGING LTD
Technical support &
Repair service
126
Download from Www.Somanuals.com. All Manuals Search And Download.
Cyprus
28B, Agiou Demetriou, Acropoli, Nicosia
Doros Neophytou
CAMERA REPAIRS
Technical support &
Repair service
Czech Republic
Czech Republic
Denmark
U nakladoveho nadrazi 2/1949, 130 00 Praha 3
Fujifilm Cz., s.r.o.
Technical support
Milesovska 1, 130 00 Praha 3, Czech republic
AWH servis
Repair service
Stubbeled 2, 2950 Vedbæk Denmark
Fujifilm Danmark A/S
Technical support &
Repair service
Finland
France
Martinkyläntie 41, 01720 Vantaa, Finland
Fuji Finland Oy
Technical support &
Repair service
9 rue d’Alembert BAT A1 ZA Pissaloup 78190 Trappes, France
FAX 33 1 01 30 58 58 [email protected]
FUJIFILM France
Technical support &
Repair service
Germany
Benzstrasse 2, 47533 Kleve, Germany
FUJIFILM Electronic Imaging
Europe GmbH
Technical support &
Repair service
National call* TEL 0180 5898980 FAX 0180 5898982
*12 Cent/Min aus dem deutschen Festnetz
Greece
1, Ihous & Ag. Anargiron str., 175 64 P.Phaliro, Athens, Greece
FUJIFILM HELLAS S.A.
Technical support &
Repair service
Hungary
Nagy Lajos király útja 20. Budapest, 1148, Hungary
TEL 3613633777 FAX 3612234250
Foto-Paradicsom Kft.
Technical support & Repair service
Technical support
Vaci ut 19. Budapest, 1134, Hungary
Iceland
Italy
Skipholt 31, 105 Reykjavik, Iceland
Icephoto (Ljosmyndavorur)
Technical support &
Repair service
Via Dell’Unione Europea, 4 - 20097 San Donato Milanese (MI), Italy
FujiFilm Italia S.p.A.
Technical support
Repair service
Fujifilm On Line - Call center
Lithuania
Gerosios Vilties str. 38, LT-03143 Vilnius, Lithuania
Fujifilm Lithuania
Technical support &
Repair service
127
Download from Www.Somanuals.com. All Manuals Search And Download.
FUJIFILM Digital Camera Worldwide Network
Malta
Fuji Tech Centre, Ciancio House, Cannon Road, Qormi, QRM05
Ciancio (1913) Co.Ltd.
Technical support &
Repair service
Norway
Lilleakerveien 10, 0283 Oslo, Norway
TEL 0047-02273 FAX 0047-22736020 http://www.fujifilm.no/
mailto:[email protected]
Fujifilm Norge AS
Technical support
Repair service
Liaveien 1, 5132 Nyborg, Norway
TEL 0047-55393880 FAX 0047-55195201 http://www.camera.no/
mailto:[email protected]
Poland
Poland Al..Jerozolimskie 178; 02-486 Warszawa
Fujifilm Polska Distribution Sp. z
o.o.
Technical support
Repair service
Poland, Muszkieterow 15, 02-273 Warszawa
Portugal
Av. Fontes Pereira de Melo, 342, 4100-259 Porto, Portugal
Fujifilm Portugal, Lda
Technical support
Repair service
Av. Fontes Pereira de Melo, 342, 4100-259 Porto, Portugal
Romania
Russia
112, Calea Dorobanti street, 4 flat, 1sector, Bucharest, Romania
CTS-Cardinal Top Systems Ltd
Technical support &
Repair service
Bld. 1, 10, Rozanova str., Moscow, 123007, Russia
ZAO “Fujifilm RU”
Technical support
Repair service
http://www.fujifilm.ru
TEL +7-495-956-98-58
Slovakia
Spain
Pribylinska 2, 831 04 Bratislava, Slovakia
Fujifilm Slovakia
Technical support
Repair service
FIS Tatracentrum, Hodzovo nam. 4 - Tatracentrum, 811 06 Bratislava, Slovakia
Aragón 180, 08011 Barcelona (España)
Fujifilm España S.A.
Technical support
Repair service
Aragón 180, 08011 Barcelona (España)
Sweden
Sveavägen 167 104 35 Stockholm
Fujifilm Sverige AB
Technical support
Repair service
Sveavägen 167 104 35 Stockholm
128
Download from Www.Somanuals.com. All Manuals Search And Download.
Switzerland /
Lichtenstein
Niederhaslistrasse 12, 8157 Dietlikon, Switzerland
Fujifilm (Switzerland) AG
Technical support &
Repair service
The Netherlands
Hoogstraat 35, 3011 PE Rotterdam, Nederlands
TEL +31(0)102812500 FAX +31(0)102812560 [email protected]
FUJIFILM Electronic Imaging
Nederland
Technical support
Repair service
Hoogstraat 35, 3011 PE Rotterdam, Nederlands
TEL +31(0)102812520 FAX +31(0)102812550 [email protected]
Turkey
U.K.
Fujifilm Plaza, Dereboyu Cad. 39 34660 Halkali, Istanbul, Turkey
Fujifilm Turkiye Sinfo A.S.
Technical support
Repair service
Fujifilm Plaza, Dereboyu Cad. 39 34660 Halkali, Istanbul, Turkey
St Martins Way St Martins Business Centre Bedford MK42 0LF
FUJIFILM UK Ltd.
Technical support
Repair service
St Martins Way St Martins Business Centre Bedford MK42 0LF
Ukraine
12, Kontraktova ploshcha, Kyiv 04070, Ukraine
Image Ukraine CJSC
Technical support &
Repair service
MIDDLE EAST
Iran
229,“Fuji” Bldg., Mirdamad Blvd., Tehran 19189, Iran
Tehran Fuka Co.
Technical support &
Repair service
Israel
Efal 33 keyriat Arie Petah Tikva 49130, Israel
Shimone Group Ltd.
Technical support
Repair service
Efal 33 keyriat Arie Petah Tikva 49130, Israel
Jordan
Al- Abdali, Amman / Jordan
Grand Stores
Technical support &
Repair service
Qatar
Blue Salon Bldg, 3rd Floor, Suhaim bin Hamad st, Al- Saad, Doha
Techno Blue
Technical support
Saudi Arabia
P.O. Box 1716, Jeddah 21441, Saudi Arabia
Emam Distribution Co. Ltd.
Technical support
Continued Q
129
Download from Www.Somanuals.com. All Manuals Search And Download.
FUJIFILM Digital Camera Worldwide Network
Syria
Al-Shahbandar P.O. Box:31180 Damascus SYRIA
Film Trading Company
Technical support
Repair service
Al-cheikh Taha P.O. Box: 6171 Aleppo SYRIA
U.A.E.
Yemen
P. O. Box 2144, Saleh Bin Lahej Building, Al Garhoud, Deira, Dubai
Grand Stores
Technical support &
Repair service
P.O.Box-2942 Haddah St. HTC, Sana’a, Yemen
TEL 00967-1-503980 FAX 00967-1-503983
Al-Haidary Trading
Technical support
Repair service
P.O.Box-2942 Haddah St. HTC, Sana’a, Yemen
TEL 00967-1-503977 FAX 00967-1-503983
AFRICA
Egypt
426 Pyramids St., Giza, Egypt
Foto Express Egypt
Technical support &
Repair service
Kenya
P.O.Box 41669-00100, Fuji Plaza, Chiromo Road, Nairobi, Kenya.
Fuji Kenya Ltd
Repair service
OCEANIA
Australia
Locked Bag 5100, Brookvale, NSW, 2100
FUJIFILM Australia Pty Ltd
Technical support &
Repair service
Fiji
70-72 Cumming Street,Suva,Fiji
Brijlal & Co. Ltd
Technical support &
Repair service
New Caledonia
New Zealand
Papua New Guinea
58, rue Higginson - B.P.661 - 98845
Phocidis SARL
Technical support &
Repair service
Cnr William Pickering & Bush Road Albany, Auckland
Fujifilm NZ Ltd
Technical support &
Repair service
Section 15, Allotment 1, Reke St, Boroko NCD. PNG. Mail: PO Box 2167, Boroko
Oceania PNG Limited
Technical support
ASIA
Hong Kong
8/F.,TSUEN WAN IND. CENTRE, 220 TEXACO RD., TSUEN WAN, HONG KONG
Fuji Photo Products Co., Ltd.
Technical support &
Repair service
130
Download from Www.Somanuals.com. All Manuals Search And Download.
Indonesia
Malaysia
Jl.Matraman Raya 12, Jakarta Timur 13150
TEL +62 021 2801000 FAX +62 021 8581620+62 021 2801012
PT Modern Photo Tbk
Technical support &
Repair service
Letter Box 1, Level 10, 11 & 12, Menara Axis, No 2, Jalan 51A/223, 46100 Petaling
Jaya, Selangor Darul Ehsan, Malaysia
FUJIFILM (Malaysia)
Sdn. Bhd.
Technical support
Repair service
Letter Box 1, Level 10, 11 & 12, Menara Axis, No 2, Jalan 51A/223, 46100 Petaling
Jaya, Selangor Darul Ehsan, Malaysia
Philippines
Singapore
24 Sto. Domingo St., Quezon City 1100, Philippines
YKL Development & Trdg. Corp.
Technical support
Repair service
24 Sto. Domingo St., Quezon City 1100, Philippines
10 New Industrial Road Fujifilm Building Singapore 536201
FUJIFILM (Singapore) Pte Ltd
Technical support &
Repair service
South Korea
South Korea
South Korea
30-1, Mukjeung-dong, Jung-gu, Seoul, Korea
Korea Fujifilm Co., Ltd.
Technical support
#301, 3F, Jeonjaland, 16-9, Hangangro3-ga, Yongsan-gu, Seoul, Korea
Yonsan AS Center (Fujidigital)
Repair service
2F, Hyeongin Tower, 23-2, Bangyi-dong, Songpa-gu, Seoul, Korea
Kangnam AS Center
(Digitalgallery)
Repair service
South Korea
Taiwan
241-4, Bujeon-dong, Busanjin-gu, Busan, Korea
Busan AS Center (Digital-Sewon)
Repair service
No. 38, Min-Chuan E. Rd. Sec. 6, Taipei (114), Taiwan, R.O.C.
Hung Chong Corp.
Technical support &
Repair service
Thailand
Vietnam
388 SP Building, 8th Floor, Phayathai, Bangkok 10400
FUJIFILM (Thailand) Ltd.
Technical support
Repair service
388 SP Building, 8th Floor, Phayathai, Bangkok 10400
99-107 Bach Van street, Ward 5, District 5, Ho chi minh city
TEL +84-8-8366807 ext.122 FAX +84-8-8380621 [email protected]
International Minh Viet Co., Ltd.
Technical support &
Repair service
131
Download from Www.Somanuals.com. All Manuals Search And Download.
7-3, AKASAKA 9-CHOME, MINATO-KU, TOKYO 107-0052, JAPAN
http://www.fujifilm.com/products/digital_cameras/index.html
Printed in China
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes and Cautions
■ Trademark Information
EXAMPLE OF ANTENNA GRO
UNDING AS PER
When the video product exhibits a distinct
change in performance - this indicates a need
for service.
Replacement Parts—When replacement parts
are required, be sure the service technician has
used replacement parts specified by the
manufacturer or have the same characteristics
as the original part. Unauthorized substitutions
may result in fire, electric shock or other
hazards.
Safety Check—Upon completion of any
service or repairs to this video product, ask the
service technician to perform safety checks to
determine that the video product is in proper
operating condition.
•
and xD-Picture Card™ are trademarks of
NATIONAL ELECTRICAL CODE
FUJIFILM Corporation.
IMPORTANT SAFETY INSTRUCTIONS
•
IBM PC/AT is a registered trademark of
International Business Machines Corp. of the
U.S.A.
Read Instructions:
Attachments—Do not use attachments not
recommended by the video product
All the safety and operating instructions should
be read before the appliance is operated.
Retain Instructions:
Antenna
Lead in
Wire
manufacturer as they may cause hazards.
Water and Moisture—Do not use this video
product near water – for example, near a bath
tub, wash bowl, kitchen sink, or laundry tub, in a
wet basement, or near a swimming pool, and
the like.
• Macintosh, Power Macintosh, iMac, PowerBook,
iBook and Mac OS are trademarks of Apple Inc.,
registered in the U.S. and other countries.
• Microsoft, Windows, the Windows logo,
Windows Vista and the Windows Vista logo are
trademarks or registered trademarks of
Microsoft Corporation in the United States and/
or other countries. Windows is an abbreviated
term referring to the Microsoft® Windows®
Operating System.
Ground
Clamp
The safety and operating instructions should be
retained for future reference.
Heed Warnings:
All warnings on the appliance and in the
operating instructions should be adhered to.
Follow Instructions:
All operating and use instructions should be
followed.
Antenna
Discharge Unit
(NEC SECTION 810-20)
Electric
Service
Equipment
Grounding Conductors
(NEC SECTION 810-21)
Power-Cord Protection—Power-Supply cords
should be routed so that they are not likely to be
walked on or pinched by items placed upon or
against them, paying particular attention to
cords at plugs, convenience receptacles, and
the point where they exit from the appliance.
Accessories—Do not place this video product
on an unstable cart, stand, tripod, bracket, or
table. The video product may fall, causing
serious injury to a child or adult, and serious
damage to the appliance. Use only with a cart,
stand, tripod, bracket, or table recommended
by the manufacturer, or sold with the video
product. Any mounting of the appliance should
follow the manufacturer’s instructions, and
should use a mounting accessory
Ground Clamps
Power Service Grounding
Electrode System
(NEC ART 250. PART H)
* The “Designed for Microsoft® Windows® XP”
logo refers to the camera and the driver only.
• IrSimple™ Trademark is owned by the Infrared
Data Association®.
• IrSS™ Trademark or IrSimpleShot™ Trademark
is owned by the Infrared Data Association®.
• SDHC logo is a trademark.
• Other company or product names are
trademarks or registered trademarks of the
respective companies.
■ Notes on Electrical Interference
If the camera is to be used in hospitals or aircrafts,
please note that this camera may cause
interference to other equipment in the hospital or
aircraft. For details, please check with the
applicable regulations.
■ Explanation of Color Television System
NTSC: National Television System Committee,
color television telecasting specifications
adopted mainly in the U.S.A., Canada and
Japan.
PAL: Phase Alternation by Line, a color
television system adopted mainly by
European countries and China.
Installation
Use
Before Using the Camera
Read the back side before using the camera.
Power Sources—This video product should be
operated only from the type of power source
indicated on the marking label. If you are not
sure of the type of power supply to your home,
consult your appliance dealer or local power
company. For video products intended to
operate from battery power, or other sources,
refer to the operating instructions.
Cleaning—Unplug this video product from the
wall outlet before cleaning. Do not use liquid
cleaners or aerosol cleaners. Use a damp cloth
for cleaning.
Object and Liquid Entry—Never push objects
of any kind into this video product through
openings as they may touch dangerous voltage
points or shortout parts that could result in a fire
or electric shock. Never spill liquid of any kind
on the video product.
Lightning—For added protection for this video
product receiver during a lightning storm, or
when it is left unattended and unused for long
periods of time, unplug it from the wall outlet
and disconnect the antenna or cable system.
This will prevent damage to the video product
due to lightning and power-line surges.
■ Test Shots Prior to Photography
For important photographs (such as weddings
and overseas trips), always take a test shot and
view the image to make sure that the camera is
working normally.
• FUJIFILM Corporation cannot accept liability for
any incidental losses (such as the costs of
photography or the loss of income from
photography) incurred as a result of faults with
this product.
Grounding or Polarization—This video
product is equipped with a polarized
alternating-current line plug (a plug having one
blade wider than the other). This plug will fit into
the power outlet only one way. This is a safety
feature. If you are unable to insert the plug fully
into the outlet, try reversing the plug. If the plug
should still fail to fit, contact your electrician to
replace your obsolete outlet. Do not defeat the
safety purpose of the polarized plug.
recommended by the manufacturer.
An appliance and cart combination should be
moved with care. Quick stops, excessive force,
and uneven surfaces may cause the appliance
and cart combination to overturn.
■ Notes on Copyright
Images recorded using your digital camera system
cannot be used in ways that infringe copyright
laws without the consent of the owner, unless
intended only for personal use. Note that some
restrictions apply to the photographing of stage
Service
Alternate Warnings—This video product is
equipped with a 3-wire grounding-type plug, a
plug having a third (grounding) pin. This plug
will only fit into a grounding-type power outlet.
This is a safety feature. If you are unable to
insert the plug into the outlet, contact your
electrician to replace your obsolete outlet. Do
not defeat the safety purpose of the grounding-
type plug.
Overloading—Do not overload wall outlets and
extension cords as this can result in a risk of fire
or electric shock.
Ventilation—Slots and openings in the cabinet
are provided for ventilation and to ensure
reliable operation of the video product and to
protect it from overheating, and these openings
must not be blocked or covered.
Servicing—Do not attempt to service this video performances, entertainments and exhibits, even
product yourself as opening or removing covers when intended purely for personal use. Users are
may expose you to dangerous voltage or other
hazards. Refer all servicing to qualified service
personnel.
also asked to note that the transfer of Memory
Card containing images or data protected under
copyright laws is only permissible within the
restrictions imposed by those copyright laws.
Antennas
■ Exif Print (Exif ver. 2.2)
Outdoor Antenna Grounding—If an outside
antenna or cable system is connected to the
video product, be sure the antenna or cable
system is grounded so as to provide some
protection against voltage surges and built-up
static charges. Section 810 of the National
Electrical Code, ANSI/NFPA No. 70, provides
information with respect to proper grounding of
the mast and supporting structure, grounding of
the lead-in wire to an antennadischarge unit,
size of grounding conductors, location of
antenna-discharge unit, connection to
Damage Requiring Service—Unplug this
video product from the wall outlet and refer
servicing to qualified service personnel under
the following conditions:
Exif Print Format is a newly revised digital camera
file format that contains a variety of shooting
information for optimal printing.
* See “Using Your Camera Correctly”
(→OWNER’S MANUAL) for more information.
■ Handling Your Digital Camera
To ensure that images are recorded correctly, do
not subject the camera to impact or shock while
an image is being recorded.
When the power-supply cord or plug is
damaged.
■ Liquid Crystal
If liquid has been spilled, or objects have fallen
into the video product.
If the LCD monitor is damaged, take particular
care with the liquid crystal in the monitor. If any of
the following situations arise, take the urgent
action indicated.
⇒ Also, read the back page.
If the video product has been exposed to rain or
water.
If the video product has been dropped or the
cabinet has been damaged.
• If liquid crystal comes in contact with your skin:
Wipe the area with a cloth and then wash
thoroughly with soap and running water.
• If liquid crystal gets into your eye:
Flush the affected eye with clean water for at
least 15 minutes and then seek medical
assistance.
The openings should never be blocked by
placing the video product on a bed, sofa, rug,
or other similar surface.
grounding electrodes, and requirements for the
grounding electrode.
If the video product does not operate normally
be following the operating instructions. Adjust
only those controls that are covered by the
operating instructions as an improper
adjustment of other controls may result in
damage and will often require extensive work by
a qualified technician to restore the video
product to its normal operation.
This video product should not be placed in a
built-in installation such as a bookcase or rack
unless proper ventilation is provided or the
manufacturer’s instructions have been adhered
to.
This video product should never be placed near
or over a radiator or heat register.
Power Lines—An outside antenna system
should not be located in the vicinity of overhead
power lines or other electric light or power
circuits, or where it can fall into such power lines
or circuits. When installing an outside antenna
system, extreme care should be taken to keep
from touching such power lines or circuits as
contact with them might be fatal.
• If liquid crystal is swallowed:
Flush your mouth thoroughly with water. Drink
large quantities of water and induce vomiting.
Then seek medical assistance.
7-3, AKASAKA 9-CHOME, MINATO-KU,
TOKYO 107-0052, JAPAN
http://www.fujifilm.com/products/
digital_cameras/index.html
BL00647-101 1AG6P1P3773--
Download from Www.Somanuals.com. All Manuals Search And Download.
■ Handling the Battery
Cautions for Your Safety:
• Do not carry or store battery with metal objects such
as necklaces or hairpins.
• Do not heat the battery or throw it into a fire.
• Do not attempt to take apart or change the battery.
• Do not recharge the battery with chargers other
those specified.
• Dispose of used battery promptly.
• Do not drop the battery or otherwise subject it to
strong impacts.
• Do not expose the battery to water.
• Always keep the battery terminals clean.
• Do not store batteries in hot places. Also, if you use
the battery for a long period, the camera body and
the battery itself will become warm. This is normal.
Use the AC power adapter if you are taking pictures
or viewing images for a long period of time.
■ Using the AA-size Ni-MH batteries correctly
• Ni-MH batteries left unused in storage for long
periods can become “deactivated”. Also, repeatedly
charging Ni-MH batteries that are only partially
discharged can cause them to suffer from the
“memory effect”. Ni-MH batteries that are
“deactivated” or affected by “memory” suffer from
the problem of only providing power for a short time
after being charged. To prevent this problem,
discharge and recharge them several times using
the camera’s “Discharging rechargeable batteries”
function.
Be sure to read this notes before using
Power Supply and Battery
* Confirm your battery type before reading the
following descriptions.
Safety Notes
WARNING
• Make sure that you use your camera correctly. Read these
Safety Notes and your Owner’s Manual carefully before use.
• After reading these Safety Notes, store them in a safe place.
The following explains proper use of batteries and
how to prolong their life. Incorrect use of batteries can
cause shorter battery life, as well as leakage,
excessive heat, fire or explosion.
Use only the battery or AC power adapters
specified for use with this camera.
Do not use voltages other than the power supply
voltage shown.
The use of other power sources can cause a fire.
About the Icons
• The icons shown below are used in this document to indicate
the severity of the injury or damage that can result if the
information indicated by the icon is ignored and the product is
used incorrectly as a result.
If the battery leaks and fluid gets in contact with
your eyes, skin or clothing. Flush the affected
area with clean water and seek medical attention
or call an emergency number right away.
Do not use the charger to charge batteries other
than those specified here.
The Ni-MH battery charger is designed for Fujifilm
HR-AA Ni-MH batteries. Using the charger to
charge conventional batteries or other types of
rechargeable batteries can cause the battery to
leak fluid, overheat or burst.
When carrying the battery, install it in a digital
camera or keep it in the hard case.
When storing the battery, keep it in the hard case.
When discarding, cover the battery terminals
with insulation tape.
Contact with other metallic objects or battery could
cause the battery to ignite or burst.
Keep Memory Cards out of the reach of small
children.
Camera uses the Rechargeable Lithium-ion
Battery
1
* When shipped, the battery is not fully charged.
Always charge the battery before using it.
* When carrying the battery, install it in a
digital camera or keep it in the soft case.
Deactivation and memory are specific to Ni-MH
batteries and are not in fact battery faults.
See OWNER’S MANUAL for the procedure for
“Discharging rechargeable batteries”.
This icon indicates that death or
serious injury can result if the
WARNING
information is ignored.
■ Battery Features
Do not use the “Discharging
rechargeable batteries” function when
alkaline batteries being used.
This icon indicates that personal
injury or material damage can result
if the information is ignored.
• The battery gradually loses its charge even when
not used. Use a battery that has been charged
recently (in the last day or two) to take pictures.
• To maximize the life of the battery, turn the camera
off as quickly as possible when it is not being used.
• The number of available frames will be lower in cold
locations or at low temperatures. Take along a spare
fully charged battery. You can also increase the
amount of power produced by putting the battery in
your pocket or another warm place to heat it and
then loading it into the camera just before you take a
picture.
If you are using a heating pad, take care not to
place the battery directly against the pad. The
camera may not operate if you use a depleted
battery in cold conditions.
■ Charging the Battery
• You can charge the battery using the battery
charger (included).
• The battery can be charged at ambient
temperatures between 0°C and +40°C (+32°F
and +104°F). Refer to the OWNER’S MANUAL for
the time of charging battery.
• You should charge the battery at an ambient
temperature between +10°C and +35°C
(+50°F and +95°F). If you charge the battery at a
temperature outside this range, charging takes
longer because the performance of the battery is
impaired.
• You cannot charge the battery at temperatures of
0°C (+32°F) or below.
• The Rechargeable Lithium-ion Battery does not
need to be fully discharged or exhausted flat before
being charged.
• The battery may feel warm after it has been charged
or immediately after being used. This is perfectly
normal.
• Do not recharge a fully charged battery.
■ Battery Life
At normal temperatures, the battery can be used at
least 300 times. If the time for which the battery
provides power shortens markedly, this indicates that
the battery has reached the end of its effective life
and should be replaced.
CAUTION
CAUTION
Camera uses AA-size alkaline or Ni-MH
(nickelmetal hydride) rechargeable batteries
2
• To charge Ni-MH batteries, use the quick battery
charger (sold separately). Refer to the instructions
supplied with the charger to make sure that the
charger is used correctly.
• Do not use the battery charger to charge other
batteries.
• Note that the batteries feel warm after being
charged.
The icons shown below are used to indicate the nature of the
information which is to be observed.
■ Applicable Batteries
Triangular icons tell you that this information requires
attention (“important”).
• In the camera, use AA-size alkaline or Ni-MH
(nickelmetal hydride) rechargeable batteries.
Do not use AA-size manganese, nickel-cadmium
(Ni-Cd) or lithium batteries in your camera because
the heat created by the batteries could damage the
camera or cause it not to work.
• The life of alkaline batteries varies between brands.
The life of batteries you purchase may be shorter
than those provided with the camera.
Circular icons with a diagonal bar tell you that the
action indicated is prohibited (“Prohibited”).
Filled circles with an exclamation mark tell you an
action that must be performed (“Required”).
Because Memory Cards are small, they can be
swallowed by children. Be sure to store Memory
Cards out of the reach of small children. If a child
swallows a Memory Card, seek medical attention or
call an emergency number.
•
Due to the way the camera is constructed, a small
amount of current is used even when the camera is
turned off. Note in particular that leaving Ni-MH
batteries in the camera for a long period will
overdischarge the batteries and may render them
unusable even after recharging.
WARNING
If a problem arises, turn the camera off, remove
the battery, disconnect and unplug the AC
power adapter.
■ Cautions for Using Battey
CAUTION
• Do not heat the batteries or throw them into a fire.
• Do not carry or store batteries with metal objects
such as necklaces or hairpins.
• Do not expose the batteries to water, and keep
batteries from getting wet or stored in moist
locations.
• Do not attempt to take apart or change the
batteries, including battery casings.
• Do not subject the batteries to strong impacts.
• Do not use batteries that are leaking, deformed,
discolored.
• Do not store batteries in warm or humid places.
• Keep the batteries out of reach of babies and small
children.
• Make sure that the battery polarity (+ and ,) is
correct.
• Ni-MH batteries will self-discharge even when not
used, and the time for which they can be used may
be shortened as a result.
• Ni-MH batteries will deteriorate rapidly if
overdischarged (e.g. by discharging the batteries in
a flashlight). Use the “Discharging rechargeable
batteries” function provided in the camera to
discharge the batteries.
• Ni-MH batteries have a limited service life. If a
battery can only be used for a short time even after
repeated discharge-charge cycles, it may have
reached the end of its service life.
Continued use of the camera when it is emitting
Do not use this camera in locations affected by
oil fumes, steam, humidity or dust.
This can cause a fire or electric shock.
smoke, is emitting any unusual odor, or is in any
Unplug
from power
other abnormal state can cause a fire or electric
socket.
shock.
Do not leave this camera in places subject to
extremely high temperatures.
Do not leave the camera in locations such as a
sealed vehicle or in direct sunlight.
This can cause a fire.
Keep out of the reach of small children.
This product could cause injury in the hands of a
child.
Do not place heavy objects on the camera.
This can cause the heavy object to tip over or fall
and cause injury.
Do not move the camera while the AC power
adapter is still connected.
Do not pull on the connection cord to
disconnect the AC power adapter.
This can damage the power cord or cables and
cause a fire or electric shock.
• Contact your FUJIFILM dealer.
Do not allow water or foreign objects to enter
the camera.
If water or foreign objects get inside the camera,
turn the camera off, remove the battery and
disconnect and unplug the AC power adapter.
Continued use of the camera can cause a fire or
electric shock.
• Contact your FUJIFILM dealer.
Do not use the camera in the bathroom or
shower.
■ Disposing of Batteries
• When disposing of batteries, do so in accordance
with your local waste disposal regulations.
This can cause a fire or electric shock.
Do not use in
the bathroom
or shower
• Do not use new with used batteries. Do not use
charged and discharged batteries together.
• Do not use different types or brands of batteries at
the same time.
Never attempt to change or take apart the
camera. (Never open the casing.)
Do not use the camera when it has been
Notes on both models (
,
)
3
1
2
■ AC Power Adapter
dropped or the casing is damaged.
This can cause a fire or electric shock.
• Contact your FUJIFILM dealer.
Do not use the AC power adapter when the plug is
damaged or the plug socket connection is loose.
This could cause a fire or electric shock.
Do not cover or wrap the camera or the AC
power adapter in a cloth or blanket.
This can cause heat to build up and distort the
casing or cause a fire.
When you are cleaning the camera or you do not
plan to use the camera for an extended period,
remove the battery and disconnect and unplug
the AC power adapter.
Failure to do so can cause a fire or electric shock.
When charging ends, unplug the charger from
the power socket.
Leaving the charger plugged into the power socket
can cause a fire.
Using a flash too close to a person’s eyes may
temporarily affect the eyesight.
Always use the AC Power Adapter (sold separately)
with the camera. The use of an AC Power adapter
other than FUJIFILM AC Power Adapter (sold
separately) can be damaged to your digital camera.
For details on the AC power adapter, refer to the
OWNER’S MANUAL of your camera.
• Use the AC power adapter for indoor use only.
• Plug the connection cord plug securely into the DC
input terminal.
Do not
disassemble.
• If you do not intend to use the camera for a long
period of time, remove the batteries from the
camera. Note if the camera is left with the batteries
removed, the time and date settings are cleared.
• The batteries feel warm right after being used.
Before removing the batteries, turn the camera off
and wait for the batteries to cool down.
• Since batteries do not work well in cold weather or
locations, warm the batteries by placing them inside
your garments before use. Batteries do not work
well when cold. They will work again when the
temperature returns to normal.
Do not change, heat or unduly twist or pull the
connection cord and do not place heavy objects
on the connection cord.
These actions could damage the cord and cause a
fire or electric shock.
• If the cord is damaged, contact your FUJIFILM
dealer.
Do not place the camera on an unstable surface.
This can cause the camera to fall or tip over and
cause injury.
Never attempt to take pictures while in motion.
Do not use the camera while you are walking or
driving a vehicle.
This can result in you falling down or being involved
in a traffic accident.
Do not touch any metal parts of the camera
during a thunderstorm.
This can cause an electric shock due to induced
current from the lightning discharge.
Do not use the battery except as specified.
Load the battery as aligned with the indicator.
• Turn off the FUJIFILM Digital camera before
disconnecting the cord from the DC input terminal.
To disconnect, pull out the plug gently. Do not pull
on the cord.
■ Notes on storage
• If a battery is stored for long periods while charged,
the performance of the battery can be impaired. If
the battery will not be used for some time, run the
battery out before storing it.
• If you do not intend to use the camera for a long
period of time, remove the battery from the camera.
• Store the battery in a cool place.
• The battery should be stored in a dry location with
an ambient temperature between +15°C and
+25°C (+59°F and +77°F).
• Do not leave the battery in hot or extremely cold
places.
• Soil (such as fingerprints) on the battery terminals
makes the batteries charge less reducing the
number of images. Carefully wipe the battery
terminals with a soft dry cloth before loading.
• Do not use the AC power adapter with any device
other than your camera.
• During use, the AC power adapter will become hot
to the touch. This is normal.
Take particular care when photographing infants
and young children.
When an xD-Picture Card is removed, the card
could come out of the slot too quickly. Use your
finger to hold it and gently release the card.
If any liquid at all leaks from the batteries, wipe
the battery compartment thoroughly and then
load new batteries.
If any battery fluid comes into contact with your
hands or clothing, flush the area thoroughly
with water. Note that battery fluid can cause
loss of eyesight if it gets into your eyes. If this
occurs, do not rub your eyes. Flush the fluid
out with clean water and contact your
physician for treatment.
• Do not take apart the AC power adapter. Doing so
could be dangerous.
• Do not use the AC power adapter in a hot and
humid place.
• Do not subject the AC power adapter to strong
shocks.
Request regular internal testing and cleaning
for your camera.
Do not heat, change or take apart the battery.
Do not drop or subject the battery to impacts.
Do not store the battery with metallic products.
Do not use chargers other than the specified
model to charge the battery.
Any of these actions can cause the battery to burst
or leak and cause fire or injury as a result.
Build-up of dust in your camera can cause a fire or
electric shock.
• The AC power adapter may emit a humming. This is
normal.
• Contact your FUJIFILM dealer to request internal
cleaning every 2 years.
• If used near a radio, the AC power adapter may
cause static. If this happens, move the camera
away from the radio.
• Please note this is not a free of charge service.
Download from Www.Somanuals.com. All Manuals Search And Download.
|