Note: This manual replaces P/N 316257106
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Instructions
Read all instructions before using this appliance. Save these instructions for future reference.
This manual contains important safety symbols and instructions. Please remember these symbols and follow all instructions given.
This symbol will help alert you to situations that may cause serious bodily harm, death or property damage.
This symbol will help alert you to situations that may cause bodily injury or property damage.
• Remove all tape and packaging before using the range.
Destroy the carton and plastic bags after unpacking the range.
Never allow children to play with packaging material.
Do not store items of interest to children in
the cabinets above a range or on the backguard of a range.
Children climbing on the range to reach items could be
seriously injured.
• Proper Installation—Be sure your appliance is properly
installed and grounded by a qualified technician in
accordance with the National Electrical Code ANSI/NFPA
No. 70 latest edition and local electrical code requirements.
Install only per installation instructions provided in the
literature package for this range.
Never Use Your Appliance for Warming or
Heating the Room.
• Storage in or on Appliance—Flammable materials should
not be stored in an oven, warmer drawer, near surface
units or in the storage drawer. This includes paper, plastic
and cloth items, such as cookbooks, plasticware and towels,
as well as flammable liquids. Do not store explosives, such as
aerosol cans, on or near the range.
Ask your dealer to recommend a qualified technician and an
authorized repair service. Know how to disconnect the power
to the range at the circuit breaker or fuse box in case of an
emergency.
• User servicing—Do not repair or replace any part of the
appliance unless specifically recommended in the manuals.
All other servicing should be done only by a qualified
technician. This may reduce the risk of personal injury and
damage to the range.
• Do Not Leave Children Alone—Children should not be left
alone or unattended in the area where appliance is in use.
They should never be allowed to sit or stand on any part of the
appliance.
• DO NOT TOUCH SURFACE UNITS, AREAS NEAR THESE
UNITS, HEATING ELEMENTS OR INTERIOR SURFACES OF
THE OVEN. Both surface units and oven heating elements
may be hot even though they are dark in color. Areas near
surface units may become hot enough to cause burns. During
and after use, do not touch, or let clothing or other flammable
materials touch these areas until they have had sufficient time
to cool. Among these areas are the cook top, surfaces facing
the cook top, the oven vent openings and surfaces near these
openings, oven door and window.
• Never modify or alter the construction of a range by
removing leveling legs, panels, wire covers, anti-tip
brackets/screws, or any other part of the product.
• Wear Proper Apparel—Loose-fitting or hanging garments
should never be worn while using the appliance. Do not let
clothing or other flammable materials contact hot surfaces.
• Do Not Use Water or Flour on Grease Fires—Smother the
fire with a pan lid, or use baking soda, a dry chemical or
foam-type extinguisher.
• When heating fat or grease, watch it closely. Fat or grease
may catch fire if allowed to become too hot.
• Use Only Dry Potholders—Moist or damp potholders on hot
surfaces may result in burns from steam. Do not let
potholders touch hot heating elements. Do not use a towel or
other bulky cloth instead of a potholder.
• Do Not Heat Unopened Food Containers—Buildup of
pressure may cause container to burst and result in injury.
Stepping, leaning or sitting on the doors or
drawers of this range can result in serious injuries and also
cause damage to the range. Do not allow children to climb or
play around the range. The weight of a child on an open door
may cause the range to tip, resulting in serious burns or other
injury.
• Remove the oven door from any unused range if it is to be
stored or discarded.
IMPORTANT—Do not attempt to operate the range during a
power failure. If the power fails, always turn off the range. If the
range is not turned off and the power resumes, the range will
begin to operate again. Once the power resumes, reset the
clock and oven function.
Do not use the oven or warmer drawer (if
equipped) for storage.
Download from Www.Somanuals.com3. All Manuals Search And Download.
Important Safety Instructions
• Protective Liners—Do not use aluminum foil to line the oven
IMPORTANT INSTRUCTIONS FOR USING
YOUR COOKTOP
• Know which knob controls each surface heating unit. Place
a pan of food on the unit before turning it on, and turn the unit
off before removing the pan.
bottom. Only use aluminum foil as recommended in this
manual. Improper installation of these liners may result in risk
of electric shock, or fire.
SELF CLEANING OVENS
• Clean in the self-cleaning cycle only the parts listed in this
Use & Care Manual. Before self-cleaning the oven, remove the
broiler pan and any utensils or foods from the oven.
• Use Proper Pan Size—This appliance is equipped with one
or more surface units of different sizes. Select utensils having
flat bottoms large enough to cover the surface unit heating
element. The use of undersized utensils will expose a portion
of the heating element to direct contact and may result in
ignition of clothing. Proper relationship of utensil to element
will also improve efficiency.
• Do Not Use Oven Cleaners—No commercial oven cleaner or
oven liner protective coating of any kind should be used in or
around any part of the oven.
• Do Not Clean Door Gasket—The door gasket is essential for
a good seal. Care should be taken not to rub, damage or
move the gasket.
• Utensil Handles Should Be Turned Inward and Not Extend
Over Adjacent Surface Elements—To reduce the risk of
burns, ignition of flammable materials, and spillage due to
unintentional contact with the utensil, the handle of the utensil
should be positioned so that it is turned inward, and does not
extend over adjacent surface units.
•The health of some birds is extremely sensitive to the fumes
given off during the self-cleaning cycle of any range. Move
birds to another well-ventilated room.
• Never Leave Surface Elements Unattended at High Heat
Settings—Boilovers cause smoking and greasy spillovers that
may ignite, or a pan that has boiled dry may melt.
IMPORTANT INSTRUCTIONS FOR CLEANING
YOUR RANGE
• Clean the range regularly to keep all parts free of grease
that could catch fire. Pay particular attention to the area near
each surface element. Do not allow grease to accumulate.
• Do Not Immerse or Soak Removable Heating Elements—
Heating elements should never be immersed in water.
Heating elements clean themselves during normal operation.
• Kitchen cleaners and aerosols—Always follow the
manufacturer’s recommended directions for use. Be aware
that excess residue from cleaners and aerosols may ignite
causing damage and injury.
• Glazed Cooking Utensils—Only certain types of glass, glass/
ceramic, ceramic, earthenware, or other glazed utensils are
suitable for cook top service without breaking due to the
sudden change in temperature. Check the manufacturer’s
recommendations for cook top use.
• Clean Ventilating Hoods Frequently—Grease should not be
allowed to accumulate on the hood or filter. Follow
manufacturer’s instructions for cleaning.
• When flaming foods under a ventilating hood, turn the fan
on.
IMPORTANT INSTRUCTIONS FOR USING
YOUR OVEN
• Use Care When Opening Oven Door or Warmer Drawer (if
equipped)—Stand to the side of the range when opening the
door of a hot oven. Let hot air or steam escape before you
remove or replace food in the oven.
FOR CERAMIC-GLASS COOK TOP MODELS
• Do Not Cook on Broken Cook Top—If cook top should break,
cleaning solutions and spillovers may penetrate the broken
cook top and create a risk of electric shock. Contact a qualified
technician immediately.
• Clean Cook Top with Caution—If a wet sponge or cloth is
used to wipe spills on a hot cooking area, be careful to avoid a
steam burn. Some cleaners can produce noxious fumes if
applied to a hot surface.
• Keep Oven Vent Ducts Unobstructed. The oven vent is
located under the left rear surface element if your model is
equipped with coil elements. The oven vent is located below
the backguard for models equipped with ceramic-glass cook
tops. Touching the surfaces in this area when the oven is
operating may cause severe burns. Also, do not place plastic
or heat-sensitive items on or near the oven vent. These items
could melt or ignite.
IMPORTANT SAFETYNOTICE
The California Safe Drinking Water and Toxic Enforcement Act
requires the Governor of California to publish a list of
substances known to the state to cause cancer, birth defects or
other reproductive harm, and requires businesses to warn
customers of potential exposure to such substances.
• Placement of Oven Racks. Always place oven racks in
desired location while oven is cool. If rack must be moved
while oven is hot use extreme caution. Use potholders and
grasp the rack with both hands to reposition. Do not let
potholders contact the hot heating elements in the oven.
Remove all utensils from the rack before moving.
READ AND SAVE THESE INSTRUCTIONS
• Do not use the broiler pan without its insert. The broiler pan
and its insert allow dripping fat to drain and be kept away from
the high heat of the broiler.
• Do not cover the broiler insert with aluminum foil. Exposed
fat and grease could ignite.
Download from Www.Somanuals.com4. All Manuals Search And Download.
Features At A Glance
Note: The features of your range will vary according to model.
Download from Www.Somanuals.com5. All Manuals Search And Download.
Features At A Glance
Note: The features of your range will vary according to model.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Surface Controls
About the Ceramic Glass Cooktop
The ceramic cooktop has radiant surface
elements located below the surface of the glass.
The design of the ceramic cooktop outlines the
area of the surface element underneath. Make
sure the diameter of the pan matches the
diameter of the element outline on the cooktop
(See Fig 1). Heat is transferred up through the
surface of the cooktop to the cookware. Only
flat-bottom cookware should be used. The type
and size of cookware, the number of surface
elements in use and the settings, are all factors
that will affect the amount of heat that will
spread to areas beyond the surface elements.
The areas surrounding the elements may
become hot enough to cause burns.
Figure 1
About the Radiant Surface Elements
The element temperature rises gradually and
evenly. As the temperature rises, the element
will glow red. To maintain the selected setting,
the element will cycle on and off. The heating
element retains enough heat to provide a
uniform and consistent heat during the off cycle.
For efficient cooking, turn off the element
several minutes before cooking is complete.
This will allow residual heat to complete the
cooking process.
Left front
Left rear
Right rear
Right front
Locations of the Radiant Surface
Elements and Controls
Your range is equipped with radiant surface
burners with 6 different wattage ratings. The
ability to heat food quicker and in larger volumes
increases as the element wattage increases.
The radiant surface elements are located on the
cooktop as follows (See Figure 2); a smaller 6
inch radiant element located at the right rear
position; a dual 6 or 9 inch radiant element
located at the right front position; a Warmer
Zone radiant element at the center rear position
(See page 12); and 2 (two) 8 inch radiant
elements located at both the left front and rear
positions. Located between left front and rear
elements is a Bridge radiant element.
Figure 2
NOTE: Please read detailed instructions for ceramic glass cooktop
cleaning in the Care & Cleaning section and Before You Call
checklist sections of this Use and Care Manual.
NOTE: Radiant elements have a limiter that allows the element to
cycle on and off, even at the HI setting. This helps to prevent
damage to the ceramic smooth top. Cycling at the HI setting is
normal and can occur if the cookware is too small for the radiant
element or if the cookware bottom is not flat (Refer to page 11 for
using correct cookware instructions with the cooktop).
The BRIDGE radiant element is controlled using
the same knob that controls the left front radiant
element position. See pages 10 and 11 for more
information about using BRIDGE radiant
element.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Surface Controls
The Electronic Surface Element Control (ESEC)
The Electronic Surface Element Control (“ESEC”) feature
includes 4 digital display windows. The ESEC feature provides
a numeric digital setting for 4 of the radiant surface element
positions on the cooktop, including shared settings at the left
front knob control position for both the left front radiant
element and the “Bridge” radiant element. Also the right front
control knob position shares settings for the dual radiant
element. These settings work the same way as normal knob
setting indicators work except the settings are displayed in
digital windows (Figures 1 thru 4).
The available ESEC Display Settings
The ESEC control provides various heat levels from Hi (Fig. 2)
to Lo (Fig. 4) and OFF (Fig. 1). The settings from Hi to 3.0
decrease in increments of .5. The settings from 3.0 to Lo
(Simmer settings) decrease in increments of .2 for more
precise settings of lower heat levels.
Figure 2
Figure 1
Use the chart (Fig. 5) to determine the correct setting for the
kind of food you are preparing. The Simmer settings are used
to simmer and keep larger quantities of foods warm such as
stews and soups. The lower Simmer settings are ideal for
delicate foods and melting chocolate or butter.
Note: The size and type of cookware used will influence the
setting needed for best cooking results.
Radiant surface elements may appear to have
cooled after they have been turned off. The glass surface
may still be hot and burns may occur if the glass surface is
touched before it has cooled sufficiently.
Do not place plastic items such as salt and
pepper shakers, spoon holders or plastic wrappings on
top of the range when it is in use. These items could melt or
ignite. Potholders, towels or wooden spoons could catch fire if
placed too close to the surface elements.
Figure 4
Figure 3
Recommended Surface Cooking Settings
RECOMMENDED SETTINGS FOR SINGLE, BRIDGE & DUAL SURFACE ELEMENTS
Setting
Type of Cooking
HIGH (8 - Hi)
Start most foods, bring water to a boil, pan broiling
MEDIUM HIGH (5 - 8) Continue a rapid boil, fry, deep fat fry
MEDIUM (3 - 5) Maintain a slow boil, thicken sauces and gravies, steam
vegetables
MEDIUM LOW (2 - 3) Keep foods cooking, poach, stew
LOW (Lo - 2)
Keep warm, melt, simmer
Figure 5
Download from Www.Somanuals.com8. All Manuals Search And Download.
Setting Surface Controls
ESEC Hot Element Indicator Message (HE)
After using any of the single, dual or Bridge radiant element positions the cooktop will
become very hot. Even after turning the control knob to OFF, the cooktop will remain hot for
some time. The ESEC control monitors the temperature of the cooktop and displays the
message “HE” (hot element) warning when the cooktop is still too hot to touch (See Fig.1). If
the HE message appears in the window, the control can still be turned on again for use.
ESEC Error Indicator Message (Er)
An error message will be displayed (flashing “Er”) at power up (or after a power failure) if ANY
of the surface control knobs were left in the ON positions. If a power failure should occur, be
sure to set all of the 4 surface control knobs to the OFF position (See Fig. 2). This will reset
the surface controls.
Be sure to reset the clock (See page 16). Once the surface controls have been set to the
OFF positions and the clock has been set with the correct time of day, the surface controls
should return to normal operation. If the surface controls do not function and the “Er”
message remains in any display after following these procedures, contact an authorized
servicer for assistance.
Figure 1
ESEC Lockout Feature ( - - )
The self-clean feature will not operate whenever a radiant surface element is ON. Conversely
the ESEC feature will not operate during a self-clean cycle or when the Oven Lockout feature
is active. Whenever the ESEC Lockout feature is active, “ - - ” may appear in any display
window (See Fig. 3). If any of the surface elements are still hot during active Lockout, “HE”
will appear in the window instead of the “ - - ” message.
Figure 2
The Single Radiant Surface Elements
The cooktop has single radiant surface elements at 2 locations; the right rear (Fig. 5) and left
rear (Fig. 6) element positions. The BRIDGE element position can also be used as a single
element (See Bridge Element Operating Instructions on pages 10-11).
To Operate the Single Surface Elements:
1. Place correctly sized cookware on the radiant surface
element.
Figure 3
2. Push in and turn the surface control knob in either direction
to the desired setting using the ESEC digital display
window for the desired setting (Fig. 4). Turn (do not push)
the knob to adjust the setting if desired. Start most
cooking operations on a higher setting and then turn to a
lower setting to finish cooking. Each surface element
provides a constant amount of heat at each setting. A
glowing red surface heating area extending beyond the
bottom edge of the cookware indicates the cookware is too
small for the surface heating area.
Figure 5
Right Rear Element
3. When cooking has completed, turn the surface control
knob to OFF before removing the cookware. Note: The HE
message will appear after turning the control knob to OFF
if the cooktop is still hot and will remain on until the heating
Figure 4
surface area has cooled sufficiently.
Note: See page 8, Figure 5 for recommended control settings.
Radiant surface elements may appear to have cooled after they have been
turned off. The glass surface may still be hot and burns may occur if the glass surface is
touched before it has cooled sufficiently.
Figure 6
Left Rear Element
Download from Www.Somanuals.com9. All Manuals Search And Download.
Setting Surface Controls
The Dual Surface Radiant Element
The cooktop is equipped with a dual radiant surface element
located at the right front (See Fig. 4) position. Symbols on the
control panel are used to indicate which coil of the dual radiant
element will heat. The symbol shown in Figure 1 indicates that
only the inner coil will heat. The symbol shown in Figure 4
indicates that both inner and outer coils will heat . You may
switch from either coil setting at any time during cooking.
Figure 1
Figure 4
To Operate the Dual Surface Element:
1. Place correctly sized cookware on the dual surface
element.
2. Push in and turn the control knob counterclockwise (See
Fig. 2) for smaller cookware or clockwise (See Fig. 5) for
largercookware.
3. Use the ESEC digital display window for the desired
setting. Turn (do not push) the knob to adjust the setting if
needed. Start most cooking operations on a higher setting
and then turn to a lower setting to finish cooking. Each
surface element provides a constant amount of heat at
each setting. A glowing red surface heating area extending
beyond the bottom edge of the cookware indicates the
cookware is too small for the surface heating area.
4. When cooking has completed, turn the surface control
knob to OFF before removing the cookware. Note: The
HE message will appear after turning the control knob to
OFF if the cooktop is still hot and will remain on until the
radiant heating surface area has cooled sufficiently. Note:
See page 8, Figure 5 for recommended control settings.
Figure 2
Figure 5
Radiant surface elements may appear to have
cooled after they have been turned off. The glass surface
may still be hot and burns may occur if the glass surface is
touched before it has cooled sufficiently.
Figure 3
Figure 6
The Bridge Surface Radiant Element
The cooktop is equipped with a “BRIDGE” surface
element located at the left front and middle (See Fig. 10)
positions. The Bridge can be used when cooking with
rectangular (like a griddle) or oval shaped cookware (Fig.
10). The element will maintain an even temperature
setting across both portions of the Bridge. If needed for
normal cookware, the Bridge element can work like a
single element without the Bridge (See Fig. 8).
Figure 7
Figure 9
Bridge element operation symbols are located on the
control panel on each side of the Bridge element control
knob. These symbols indicate the direction to turn the
control knob when operating the Bridge element. The
symbol in Figure 7 indicates that only the single portion
of the Bridge element will heat (See Fig. 8). The symbol
in Figure 9 indicates that both the single and Bridge
portions of the element will heat together (Fig. 10). You
may switch from either of these settings at any time
during cooking with the Bridge element.
Figure 8
Bridge element without
Bridge portion.
Figure 10
Bridge element with Bridge
portion.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Surface Controls
To Operate the Bridge Surface Element:
1. Place correctly sized cookware on the Bridge surface
element.
2. Push in and turn the control knob counterclockwise (See
Figs. 1 and 2) to heat the portion of the Bridge element for
normal shaped cookware or clockwise (See Figs. 3 and 4)
for larger or rectangular shaped cookware.
3. Use the ESEC digital display window for the desired
setting. Turn (do not push) the knob to adjust the setting if
needed. Start most cooking operations on a higher setting
and then turn to a lower setting to finish cooking. Each
surface element provides a constant amount of heat at
each setting. A glowing red surface heating area extending
beyond the bottom edge of the cookware indicates the
cookware is too small. Please note that not all cookware
will fit the Bridge element correctly.
4. When cooking has completed, turn the surface control
knob to OFF before removing the cookware. The HE
message will appear in the display after turning the control
knob to OFF if the cooktop is still hot and will remain on
until the radiant heating surface area has cooled
sufficiently.
Figure 1
Figure 3
The BRIDGE element may also be used in combination with
the left rear single element. Because these elements have 2
different controls, one element can be used to cook while the
other element may be used to keep food warm (See Fig. 5).
Figure 4
Figure 2
Radiant surface elements may appear to have
cooled after they have been turned off. The glass surface may
still be hot and burns may occur if the glass surface is
touched before it has cooled sufficiently.
Figure 5
Surface Cooking
Using Proper
Cookware
Cookwareshouldhave
flat bottoms that make
good contact with the
entiresurfaceheating
element. Check for
flatness by rotating a
ruler across the bottom
of the cookware (See
Fig. 6).
Figure 6
Be sure to follow the recommendations for using
cookware as shown in Fig. 7.
Note: The size and type of cookware used will influence
the setting needed for best cooking results.
Figure 7
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Surface Cooking
Operating the Warming Zone
The purpose of the Warming Zone is to keep hot cooked foods at serving temperature. Use the Warming Zone to keep
cooked foods hot such as; vegetables, gravies, casseroles, soups, stews, breads, pastries and oven-safe dinner plates.
Always start with hot food. It is not recommended to heat cold food on the Warming Zone.
All food placed on the Warming Zone should be covered with a lid or aluminum foil to
maintain quality. For best results, when warming pastries or breads, the cover should have
an opening to allow moisture to escape. Do not use plastic wrap to cover food. Plastic
may melt onto the surface and be very difficult to clean. Use only plates, utensils and
cookware recommended for oven and cooktop use on the Warming Zone.
Always use pot holders or oven mitts when removing food from the Warming
Zone as cookware and plates will be hot.
To Set the Warming Zone Control:
1. To set the control, push in and turn the knob. The On indicator light will come on (See
Fig. 1 and 2). The temperatures are approximate, and are designated by HI, MED and
LO. However, the control can be set at any position between HI and LO for different
levels of heating (Fig.1).
2. When done, turn the control to OFF. The Warming Zone Hot surface indicator light
will remain on until the Warming Zone cools to a moderate level (See Fig. 1 and 2).
Temperature Selection
Refer to the table for recommended Warming Zone food settings (Fig. 3). If a particular food
is not listed, start with the medium level, and adjust as needed. Most foods can be kept at
serving temperatures by using the medium level.
The Warming Zone will not glow red when it is hot, but becomes hot enough
to cause burns. Avoid placing hands on or near the Warming Zone until the Warming Zone
Figure 1
Hot surface indicator light is off.
Warming Zone Recommended Food
SettingsTable
Food Item
Heating
Level
HotBeverages
FriedFoods
Vegetables
Soups(Cream)
Stews
HI
HI
MED
MED
MED
MED
MED
LO
Sauces
Meats
Gravies
Eggs
LO
Dinner Plates with Food
Casseroles
Breads/Pasteries
LO
LO
LO
Figure 2
Figure 3
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Setting Oven Controls
Arranging the Oven Racks
ALWAYS ARRANGE OVEN RACKS WHEN THE OVEN IS COOL (PRIOR TO
OPERATING THE OVEN). Always use oven mitts when the oven is hot.
Removing and Replacing Oven
OvenVentLocation
ArrangingOvenRacks
Racks
To bake on a single rack, place the
rack in position 3 or 4. To bake on 2
racks, place the racks in positions 2
and 4. To bake on 3 racks, place the
racks in positions 1, 3 and 5. Use the
6th rack position (Roasting Shelf) for
roasting large food items only.
The oven vent is located below the
backguard. When the oven is on, hot
To remove, pull the rack forward until
it stops. Lift up front of rack and slide
air is released through the vents. This
out. To replace, fit the rack onto the
guides on the oven walls. Tilt the front
of the rack upward and slide the rack
results.
venting is necessary for proper air
circulation in the oven and good baking
back into place.
Air Circulation in the Oven
If using 1 rack, place in center of oven. If using multiple
racks, stagger cookware as shown.
1 Oven Rack
For best air circulation and baking results allow 2-4" (5-10 cm)
around the cookware for proper air circulation and be sure
pans and cookware do not touch each other, the oven door,
sides or back of the oven cavity. The hot air must circulate
around the pans and cookware in the oven for even heat to
reach around the food.
Multiple Oven Racks
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Warming Drawer Controls
(some models)
Arranging Warming Drawer Rack Positions
The rack can be used in 2 ways:
Always use pot holders
or oven mitts when removing food from
the Warming Drawer as cookware and
plates will be hot and you can be
burned.
•
In the upright position to allow low profile food items to be placed both
under and on top of the rack (for example, rolls or biscuits on top of the
rack and a casserole dish underneath).
In the downward position to allow you to place light weight food items
and empty cookware (for example, rolls or pastries and dinner plates) on
the rack.
•
Set the Warming Drawer rack in either position as shown below (Fig. 1).
Figure 1
To Operate the Warming Drawer
The purpose of the Warming Drawer is to keep hot cooked foods at serving
temperature. Always start with hot food. It is not recommended to heat cold
food in the Warming Drawer.
Figure 2
All food placed in the Warming Drawer should be covered with a lid or
aluminum foil to maintain quality. Do not use plastic wrap to cover food.
Plastic may melt onto the drawer and be very difficult to clean. Use only
utensils and cookware recommended for oven use in the Warming Drawer.
WarmingDrawerRecommended
Food Settings Table
Food Item
Setting
To Set the Warming Drawer Control
The control is used to select the temperature of the Warming Drawer. It is
located on the control panel. To set the control, push in and turn the knob to
the desired setting. The temperatures are approximate, and are designated by
HI (high), MED (medium) and LO (low). To set the Warming Drawer control:
1. Turn the knob to select the desired temperature setting.
2. For best results, preheat the drawer before adding food. An empty drawer
will preheat in approximately 15 minutes.
Bacon
HI
HI
HamburgerPatties
Poultry
HI
Pork Chops
FriedFoods
Pizza
HI
HI
HI
3. When done, turn the control to OFF.
Gravies
MED
MED
MED
MED
MED
MED
MED
MED
LO
Casseroles
Eggs
Warming Drawer Temperature Selection
Recommended Warming Drawer food settings are shown in Figure 3. If a
particular food is not listed, start with the MED setting. If more crispness is
desired, remove the lid or aluminum foil from the food. Most foods can be kept
at serving temperatures on the MED setting. When a combination of foods are
to be kept warm (for example, a meat with 2 vegetables and rolls) use the HI
setting. To avoid heat loss, do not open the Warming Drawer while in use.
Roasts (Beef, Pork, Lamb)
Vegetables
Biscuits
Rolls, hard
Pastries
Warming Drawer Indicator Light
Rolls (soft)
Empty Dinner Plates
The Warming Drawer indicator light is located above the Warming Drawer
control knob (See Fig. 2). It turns on when the control is set, and stays on until
the control is turned off. The Warming Drawer will not operate during the
self-clean cycle.
LO
Figure 3
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Control Pad Features
READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use of your oven, become
familiar with the various features and functions of the oven as described below. Detailed instructions for each feature
and function follow later in this Use & Care Manual.
0 THRU 9
CONVECTION
CONVECTION
OVEN LIGHT—
OVEN LOCKOUT— CLOCK—
NUMBER PADS
— Used to enter
temperature and
times.
BAKE— Used to
select the Convection
Bake feature (See
page 26).
ROAST— Used to
Used to turn the
Used to disable all Used to set
select the Convection oven light on and oven features (See the time of
Roast feature (See
page 25).
off (See page 34). page 18).
day. (See
page 16).
BROIL— Used to
select variable
Broil feature (See
page 24).
BAKE—Used to
enter the normal
baking feature.
(See page 21).
PREHEAT— Used
to bring the oven
temperature up
before placing food
(See page 20).
START —
CLEAN— Used to
select the self-
cleaning feature
(See page 28).
TIMER ON/
OFF— Used to Used to enter
set or cancel
the kitchen
timer. The
kitchen timer
does not start
or stop cooking
(See page 17).
BAKE TIME—
STOP TIME—
Used with BAKE, Used to cancel any
COOK TIME, and
CLEAR/OFF —
Used to
start all
oven
features
(not used
with Oven
Light).
the length of
the baking time. CLEAN to
oven mode
previously entered
except the oven
program a
delayed baking or lock out, time of day
delayed self-
cleaning cycle
stop time.
and minute timer.
Press CLEAR/OFF
to stop cooking.
All of the features listed have minimum and maximum time or temperature settings
that may be entered into the control. An ENTRY acceptance beep will sound each
time a control pad is touched (the Oven Lockout pad is delayed by 3 seconds).
Minimum
and
Maximum
Control
Pad
An ENTRY ERROR tone (3 short beeps) will sound if the entry of the temperature
or time is below the minimum or above the maximum settings for the feature.
MAX. TEMP. /TIME
550°F / 288°C
550°F / 288°C
HI-550°F/288°C
11:59 Hr./ Min.
11:59 Hr./ Min.
12:59 Hr./ Min.
11:59 Hr./ Min.
11:59 Hr./ Min.
23:59 Hr./ Min.
12:59 Hr./ Min.
23:59 Hr./ Min.
4hours
MIN. TEMP. /TIME
170°F / 77°C
170°F / 77°C
400°F / 205°C
0:01 Min.
Settings
FEATURE
PREHEAT TEMP.
BAKE TEMP.
BROIL TEMP.
KITCHEN TIMER 12Hr.
24Hr.
0:01 Min.
1:00 Hr./ Min.
0:00 Hr./ Min.
0:01 Min.
CLOCK TIME
12Hr.
24Hr.
OVEN BAKE TIME 12Hr.
24Hr.
0:01 Min.
1:00 Hr./ Min.
0:00 Hr./ Min.
2hours
STOP TIME
12Hr.
24Hr.
CLEAN TIME
550°F / 288°C
300°F / 149°C
CONVECTIONBAKE
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Oven Controls
Setting the Clock
The CLOCK
pad is used to set the clock. The clock may be
set for 12 or 24 hour time of day operation. The clock has been
preset at the factory for the 12 hour operation. When the range is
first plugged in, or when the power supply to the range has been
interrupted, the timer in the display will flash with "PF" (power
failure, See Fig. 1).
Figure 1
INSTRUCTIONS
PRESS
DISPLAY
To set the clock (example below for 1:30):
1. Press
2. Press
. "CLO" will appear in the display (Fig. 2).
pads to set the time of day to 1:30 (Fig.
Figure 2
Figure 3
3). "CLO" will appear in the display. Press
disappear and the clock will start (Fig. 4).
. "CLO" will
Changing between 12 or 24 hour time of day display:
1. Press and hold
for 6 seconds (Fig. 3). While holding the
for 6 seconds
pad down, the current time of day will remain and "CLO" will
disappear from the display (Fig. 4). CONTINUE holding the pad
until the a beep is heard.
Figure 4
Figure 5
Figure 6
2. The display will show either "12:00" (Fig. 5) or "24:00" (Fig. 6).
3. Press
to switch between the 12 and 24 hour time of day
display. The display will show either "12:00" (Fig. 5) or "24:00"
(Fig. 6).
or
4. Press
change.
to accept the change or press
to reject the
5. Reset the correct time as described in To set the Clock above.
Please note that if the 24 hour time of day mode was chosen,
the clock will now display time from 0:00 through 23:59 hours.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Oven Controls
Setting Continuous Bake or 12 Hour Energy Saving
The KITCHEN TIMER
and CLEAN
pads control the Continuous Bake or 12 Hour Energy Saving features. The
oven control has a factory preset built-in 12 Hour Energy Saving feature that will shut off the oven if the oven control is left
on for more than 11 hours and 59 minutes. The oven can be programmed to override this feature for Continuous Baking.
INSTRUCTIONS
PRESS
DISPLAY
To set the control for Continuous Bake or 12 Hour
Energy Saving features:
for 7 seconds
1. Press and hold
for 7 seconds (Fig.1). ":12" or ":- -" will
Figure 1
appear in the display and the control will beep once.
2. Press
to switch between the 12 Hour Energy Saving and
continuous bake features. Note: ":12" in the display indicates
the control is set for the 12 Hour Energy Saving mode and ":- -"
indicates the control is set for the Continuous Bake feature
(Figures 2 and 3).
Figure 2
Figure 3
Figure 4
or
3. Press
to accept the change (Fig. 4; display will return to
to reject the change.
time of day) or press
Setting Kitchen Timer
The KITCHEN TIMER
pad controls the Kitchen Timer feature. The Kitchen Timer serves as an extra timer in the
kitchen that will beep when the set time has run out. It does not start or stop cooking. The Kitchen Timer feature can be
used during any of the other oven control functions. Refer to the “Minimum and Maximum Control Pad Settings” on page
15 for the time amount settings.
INSTRUCTIONS
PRESS
DISPLAY
To set the Kitchen Timer (example for 5 minutes):
1. Press
. "0:00" will appear and "TIMER" will flash in the
display (Fig. 5).
Figure 5
Figure 6
2. Press the number pads to set the desired time in the display
(example ). Press . The time will begin to count down
(Fig. 6) and "TIMER" will appear in the display. Note: If
is
not pressed the timer will return to the time of day.
3. When the set time has run out, "End" will show in the display
(Fig. 7), and 3 beeps every 60 seconds will sound until
pressed.
is
Figure 7
To cancel the Kitchen Timer before the set time has
run out:
Press
. The display will return to the time of day.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Oven Controls
Setting Oven Lockout Feature
The
pad controls the Oven Lockout feature. The Oven Lockout feature automatically locks the oven door and
prevents the warmer drawer and ESEC Control from being turned on. It does not disable the clock, Kitchen Timer, Warmer
Zone or the interior oven lights.
INSTRUCTIONS
PRESS
DISPLAY
To activate the Oven Lockout feature:
1. Press and hold
for three seconds (Fig. 1).
for 3 seconds
2. After 3 seconds the lock icon light (
) will appear, a beep will
sound and "DOOR LOCKED" will flash in the display. Once the
oven door is locked the "DOOR LOCKED" indicator will stop
flashing and remain on along with the lock icon light.
Figure 1
To reactivate normal oven operation:
1. Press and hold
for three seconds. A beep will sound. The
for 3 seconds
"DOOR LOCKED" will continue to flash until the oven door has
completely unlocked and the lock icon light (
(See Fig. 2).
) will clear
2. The range is again fully operational.
Figure 2
Setting Temperature Display — Fahrenheit or Celsius
The BROIL
and CLEAN
pads control the Fahrenheit or Celsius
temperature display modes. The oven control can be programmed to display
temperatures in Fahrenheit or Celsius. The oven has been preset at the factory to
display in Fahrenheit.
INSTRUCTIONS
PRESS
DISPLAY
To change display from Fahrenheit to Celsius or
Celsius to Fahrenheit:
1. To tell if the display is set for Fahrenheit or Celsius press and
for 7seconds
hold the
pad. "BROIL", "550°" will appear in the display
(See Fig. 3) and continue to HOLD for 7 seconds. A beep will
then sound. If "F" appears, the display is set to show
temperatures in Fahrenheit (Fig. 4). If "C" appears, the display
is set to show temperatures in Celsius (Fig. 5).
Figure 3
Figure 4
2. Press
to switch between Fahrenheit or Celsius display
modes. The display will show either "F" (Fig. 4) or "C" (Fig. 5).
3. Press
change.
to accept the change or press
to reject the
or
Figure 5
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Oven Controls
Setting Silent Control Operation
The STOP TIME
and CLEAN
pads control the Silent Control operation feature. The Silent Control operation
feature allows the oven control to be operated without sounds or beeps whenever necessary. If desired the control can be
programmed for silent operation and later returned to operating with all the normal sounds and beeps.
INSTRUCTIONS
PRESS
DISPLAY
To change control from normal sound operation to
silent control operation:
1. To tell if your range is set for normal or silent operation press
and hold
for 7 seconds. "DELAY" will appear and flash in
for 7seconds
Figure 1
Figure 2
the display (Fig. 1). If ":SP" appears (Fig. 2), the control will
operate with normal sounds and beeps. If ":- -" appears (Fig.3),
the control is in the silent operation mode.
2. Press
to switch between normal sound operation and silent
operation mode. The display will show either ":SP" (Fig. 2) or ":-
-" (Fig. 3).
or
3. Press
change.
to accept the change or press
to reject the
Figure 3
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Oven Controls
Setting Preheat
The PREHEAT
pad controls the Preheat feature. The Preheat feature will bring the oven up to temperature and then
indicate when to place the food in the oven. Use this feature when recipes call for preheating. Preheating is not necessary
when roasting or cooking casseroles. The oven can be programmed to preheat at any temperature between 170°F to
550°F.
INSTRUCTIONS
PRESS
DISPLAY
To set the Preheat temperature for 350°F:
1. Arrange the interior oven racks.
2. Press
1).
. "- - - °" and "BAKE" will appear in the display (Fig.
3. Press
. "350°" and "PRE" will appear in the
Figure 1
Figure 2
Figure 3
display (Fig. 2).
4. Press
. "PRE" and "BAKE" will appear in the display as the
oven heats and reaches 350°F (Fig 3).
Note: After the oven has reached the desired temperature (this
example, 350°F) the control will beep and the "PRE" light will turn
off and oven temperature will be displayed (Fig. 4). If the beep was
missed, a quick glance at the display with oven temperature
showing in the oven display is a good way to check that the oven
has already reached the preheat temperature. Once the oven has
preheated, PLACE FOOD IN THE OVEN. The "BAKE" light will
stay on.
Press
when baking is complete or to cancel the preheat
Figure 4
feature.
To change Preheat temperature while oven is
preheating (example changing from 350 to 425°F):
If it is necessary to change the preheat temperature while the oven
is preheating to the original temperature:
1. While preheating, press
the display (Fig. 5)
. "- - -°" and "BAKE" will appear in
Figure 5
Figure 6
2. Enter the new preheat temperature. Press
.
"425°" and "BAKE" will appear in the display (Fig. 6).
3. Press
. "PRE" and "BAKE" will appear in the display as the
oven heats to 425°F (Fig 7). A beep will sound once the oven
temperature reaches 425°F and the display will show "425°"
and"BAKE".
Figure 7
Figure 8
4. When baking is complete press
.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Oven Controls
Setting Bake
The BAKE
pad controls normal baking. If preheating is necessary, refer to the
Preheat Feature for instructions.
The oven can be programmed to bake at any temperature from 170°F to 550°F (The sample shown below is for 350°F).
INSTRUCTIONS
PRESS
DISPLAY
To set the Bake Temperature to 350°F:
1. Arrange interior oven racks and place food in oven.
2. Press
, "- - - °" will appear in the display (Fig. 1).
Figure 1
3. Press
(Fig. 2). "BAKE" will flash and "350°" will
appear in the display.
4. Press
Fig. 3).
. "BAKE" and "350°" will appear in the display (See
Figure 2
Figure 3
Note: A beep will sound once the oven temperature reaches 350° F.
Pressing will cancel the Bake feature at any time.
To change the Bake Temperature (example changing
from 350° to 425°F):
1. After the oven has already been set to bake at 350°F and the
Figure 4
Figure 5
Figure 6
oven temperature needs to be changed to 425°F, press
(Fig.4) and "- - - ° " will show in the display.
2. Press
the display.
3. Press
(Fig. 5). "425°" and "BAKE" will appear in
. "BAKE" and the new oven temperature "425°" will
appear in the display (Fig 6).
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Oven Controls
Setting Timed Bake
The BAKE
and BAKE TIME
pads control the Timed Bake feature. The automatic timer of the Timed Baked
feature will turn the oven off at the time you select in advance.
INSTRUCTIONS
PRESS
DISPLAY
To program the oven to begin baking immediately
and to shut off automatically: (example below to
bake at 350°F for 50 minutes):
1. Be sure the clock is set for the correct time of day.
2. Arrange interior oven rack(s) and place the food in the oven.
Figure 1
Figure 2
Figure 3
3. Press
, "- - - °" will appear in the display (Fig. 1).
4. Press
(Fig. 2). "BAKE" will flash and "350°" will
appear in the display.
5. Press
. "BAKE" and "350°" will be displayed (See Fig. 3).
6. Press
. "TIMED" will flash; "BAKE", "0:00" and "350°"
will appear in the display (Fig.4).
7. Enter the desired baking time by pressing
. "TIMED"
Figure 4
Figure 5
will flash and "BAKE", ":50" and "350°" will appear in the
display (Fig. 5). Note: Baking time can be set for any amount of
time between 1 minute to 11 hours and 59 minutes.
8. Press
. Both the "TIMED" and "BAKE" icons will remain on
in the display (Fig. 6). Once the Timed Bake feature has
started, the current time of day will appear in the display.
Note: After the Timed Bake feature has activated, press
to
Figure 6
display the bake time remaining in the Timed Bake mode. Once
Timed Bake has started baking, a beep will sound when the oven
temperature reaches the set temperature. The BAKE TIME
pad may also be used to set timed or delayed timed cooking with
the CONV ROAST
or CONV BAKE
pads.
Press when baking is complete or at any time to cancel the
Timed Bake feature.
Figure 7
When the timed bake time runs out:
1. "End" will appear in the display and the oven will shut off
automatically (Fig. 7).
2. The control will beep 4 times. The control will continue to beep
3 times each minute until
is pressed.
Use caution with the TIMED BAKE or DELAYED TIME BAKE features. Use the automatic timer when
cooking cured or frozen meats and most fruits and vegetables. Foods that can easily spoil such as milk, eggs, fish, meat
or poultry, should be chilled in the refrigerator first. Even when chilled, they should not stand in the oven for more than 1
hour before cooking begins, and should be removed promptly when cooking is completed. Eating spoiled food can result in
sickness from food poisoning.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Oven Controls
Setting Delayed Time Bake
The BAKE
, BAKE TIME
and STOP TIME
pads control the Delayed Time Bake feature. The automatic
timer of the Delayed Time Bake will turn the oven on and off at the time you select in advance.
INSTRUCTIONS
PRESS
DISPLAY
To program the oven for a delayed bake start time and
to shut off automatically (example for baking at 350°F
for 50 minutes and finishing at 5:30):
Figure 1
1. Be sure that the clock is set with the correct time of day.
2. Arrange interior oven rack(s) and place the food in the oven.
3. Press
. "- - -°" will appear in the display (Fig. 1).
Figure 2
Figure 3
4. Press
(Fig. 2). "BAKE" will flash and "350°" will
appear in the display.
5. Press
. "BAKE" and "350°" will appear in the display (Fig. 3).
6. Press
. "TIMED" will flash; "BAKE", "0:00" and "350°" will
appear in the display (Fig.4).
7. Enter the desired baking time using the number pads by pressing
Figure 4
Figure 5
. "TIMED" will flash; "BAKE", ":50" and "350°" will
appear in the display (Fig. 5). Note: Baking time can be set for any
amount of time from 1 minute to 11 hours and 59 minutes.
8
Press
. "TIMED", "BAKE" and "350°" will be displayed (Fig. 6).
. Enter the desired stop time using the number pads
(Fig. 7).
9. Press
10. Press
Figure 6
Figure 7
Figure 8
Figure 9
. When Delayed Time Bake starts, the set oven
temperature will disappear, "TIMED DELAY", "BAKE" and the
current time of time of day will appear in the display (Fig. 8).
Note: Once Delayed Time Bake has started, press
to display the
bake time remaining . Once Delayed Time Bake has started baking, a
beep will sound when the oven temperature reaches the set
temperature. Press
when baking has completed or at any time to
cancel the Delayed Time Bake feature.
When the set bake time runs out:
1. "End" will appear in the display and the oven will shut off
automatically (Fig. 9).
2. The control will beep 4 times. The control will continue to beep 3
times each minute until
is pressed.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Oven Controls
Setting Broil (for Electric Ranges) - The
pad controls the Broil feature. When broiling, heat radiates
downward from the oven broiler element for even coverage. The Broil feature is preset to start broiling at 550°F however,
the Broil feature temperature may be set between 400°F and 550°F.
The broil pan and broil pan insert used together allow dripping grease to drain and be kept away from the high heat of the
oven broiler. DO NOT use the broil pan without the insert (See Fig. 5). DO NOT cover the broil pan insert with foil. The
exposed grease could catch fire.
Should an oven fire occur, leave the oven door closed and turn off the oven. If the fire continues, throw
baking soda on the fire or use a fire extinguisher. DO NOT put water or flour on the fire. Flour may be explosive and water
can cause a grease fire to spread and cause personal injury.
INSTRUCTIONS
PRESS
DISPLAY
To set the oven to broil at the default setting (550°F):
1. Place the broiler pan insert on the broiler pan. Then place the
food on the broiler pan insert. DO NOT use the broiler pan
without the insert. DO NOT cover the broiler insert with foil. The
exposed grease could ignite.
2. Arrange the interior oven rack and place the broiler pan on the
rack. Be sure to center the broiler pan directly under the broiler
element. Make sure the oven door is in the broil stop
position (See Fig. 4).
Figure 1
Figure 2
3. Press
. "BROIL" will flash and "550°" will appear (Fig. 1).
4. If a lower broil temperature is desired (minimum broil
temperature setting is 400°F), press the desired temperature
before continuing to step 5.
Figure 3
5. Press
. The oven will begin to broil. "BROIL" and "550°" will
appear in the display (Fig. 2).
6. Broil on one side until food is browned; turn and cook on the
second side. Season and serve. Note: Always pull the rack out
to the stop position before turning or removing food.
7. To cancel broiling or if finished broiling press
(Fig. 3).
Broiling Times
Broil
Stop Position
Use the following table for approximate broiling times. Increase or decrease broiling times, or
move the broiling pan to a different rack position to suit for doneness. If the food you are
broiling is not listed in the table, follow the instructions provided in your cookbook and watch
the item closely.
Figure 4
Electric Range Broiling Table Recommendations
Food
Item
Rack
Position
Temp
Setting
Cook Time
1stside
2ndside
Doneness
Steak 1" thick
2nd
2nd
2nd
3rd
2nd
2nd
3rd
550° F
550° F
550° F
450° F
450° F
500° F
550° F
550° F
550° F
6:00
7:00
8:00
20:00
8:00
13:00
5:00
4:00
5:00
6:00
10:00
6:00
n/a
n/a
7:00
8:00
Rare
Medium
Well
Well
Well
Well
Well
Medium
Well
Figure 5
Pork Chops 3/4" thick
Chicken - Bone In
Chicken - Boneless
Fish
Shrimp
Hamburger 3/4" thick
2nd
3rd
9:00
10:00
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Oven Controls
Setting Convection Roast
The CONV ROAST
pad feature is used when cooking with meat. This pad has been designed to give optimum
cook performance for roasting meats.
The CONVECTION ROAST pad combines a cook cycle with the convection fan and element to roast meats and poultry.
Preheating is not necessary for meats and poultry. Heated air circulates around the food from all sides, sealing in juices and
flavors. Foods are crispy brown on the outside while staying moist on the inside.
INSTRUCTIONS
PRESS
DISPLAY
To set the Convection Roast feature (example for
Convection Roast at 350°F):
1. Arrange interior oven racks and place food in oven.
2. Press
Fig. 1).
. "CONV" will flash and "---°" will be displayed (See
Figure 1
Figure 2
Figure 3
3. Press
. "CONV" will flash and "350°" will appear
in the display (See Fig. 2).
4. Press
. "CONV", "350°" and the convection fan icon will
also appear in the display (See Fig. 3).
Press
to stop Convection Roast, or to cancel Convection
Roast at any time.
Convection Roasting Instructions
When using the Convection Roast pad, use the broiler pan and insert along with the
roasting rack. The broiler pan will catch grease spills and the insert will help prevent
grease spatters. The roasting rack will allow the heat to circulate around the meat.
To prevent food from contacting the broil element and to prevent grease
spattering, DO NOT use the roasting rack when broiling.
1. Place oven rack on bottom or next to the bottom rack position. See Arranging
Oven Racks in this Use & Care Manual.
2. Place the insert in the broiler pan. The roasting rack fits on the insert allowing the
heated air to circulate under the food for even cooking and helps to increase
browning on the underside. Make sure the roasting rack is securely seated on the
insert in the broiler pan . DO NOT use the broiler pan without the insert or cover the
insert with aluminum foil.
3. Position food (fat side up) on the roasting rack (See Fig. 4).
4. Place the broiler pan on the oven rack.
Figure 4
Note: The BAKE TIME
the CONV ROAST
pad may be used to set timed or delayed timed cooking with
pad (refer to page 22, steps 6-8).
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Oven Controls
Setting Convection Bake
BenefitsofConvectionBake:
The CONV BAKE
pad controls
Air
circulation
during
Convection
Bake
—Some foods cook up to 30% faster,
saving time and energy.
the Convection Bake feature. Use
the Convection Bake feature when
cooking speed is desired. The oven
can be programmed for Convection
baking at any temperature between
300°F (149° C) to 550°F (288° C).
—Multiple rack baking.
—No special pans or bakeware
needed.
Figure 1
Convection baking uses a fan to circulate the oven's heat evenly and
continuously within the oven (See Figure 1). This improved heat distribution
allows for fast, even cooking and browning results. It also gives better
baking results when using two (2) or three (3) racks at the same time.
Breads and pastries brown more evenly. Most foods cooked in a standard
oven will cook faster and more evenly with Convection Bake.
Note: The BAKE TIME
pad may be used to set timed or delayed
pad (refer to page 22 steps 6-8).
timed cooking with the CONV BAKE
Figure 2
General Convection Bake Instructions
1. When using Convection Bake, decrease your normal cooking times as shown on page 37. Adjust the cook time for
desired doneness as needed. Time reductions will vary depending on the amount and type of food to be cooked.
Cookies and biscuits should be baked on pans with no sides or very low sides to allow heated air to circulate around
the food. Food baked on pans with a dark finish will cook faster.
2. Preheating is not necessary when cooking casseroles with Convection Bake.
3. When using Convection Bake with a single rack, place oven rack in position 3 or 4. If cooking on multiple racks, place
the oven racks in positions 1, 3 and 5 (for 3 racks) and positions 2 and 4 (for 2 racks; See Fig. 2).
4. Layer cakes will have better results when baked with the normal Bake feature.
INSTRUCTIONS
PRESS
DISPLAY
To set the oven for Convection Bake and
temperature to 350°F:
1. Arrange interior oven racks and place food in oven.
2. Press
. "CONV BAKE" will flash and "- - -°" will appear in
. "CONV BAKE" and "350°"will appear
Figure 3
Figure 4
Figure 5
the display (Fig. 3).
3. Press
in the display.
4. Press
. "CONV BAKE", "PRE" and the fan icon will appear
in the display (See Fig. 5) until the oven reaches 350°F. A beep
will sound once the oven temperature reaches 350°F and the
display will then show "350°", "CONV BAKE" and the fan icon
(See Fig. 6).
Note: The convection fan will come on AS SOON AS the oven has
been set for Convection Bake. The oven icon display shows a
rotating fan. This rotating fan icon indicates when the Convection
Fan is operating (See Fig. 6).
Figure 6
Press
to stop Convection Bake or cancel Convection Bake at
any time.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Self-Cleaning
Preparing for the Self-Clean Cycle
A self-cleaning oven cleans itself with high temperatures which eliminate soil completely or
reduce it to a fine powdered ash you can wipe away with a damp cloth. These temperatures
are well above normal cooking temperatures.
1. Adhere to the following cleaning precautions:
•
Allow the oven to cool before pre-cleaning.
•
Wear rubber gloves when cleaning and while wiping up the residue after the self-
clean cycle.
•
•
DO NOT use oven cleaners or oven protective coatings in or around any part of the
self-cleaningoven.
DO NOT clean the oven door gasket. The woven material of the oven door gasket is
essential for a good seal. Care should be taken not to rub, damage or remove the
gasket.
The health
of some birds is extremely
sensitive to the fumes
given off during the self-
cleaning cycle of any
range. Move birds to
anotherwell-ventilated
room.
•
DO NOT use any cleaning materials on the oven door gasket. Doing so could cause
damage.
2. Remove the Searing Grill, Broiler Pan and Broiler Pan Insert, all utensils and any
aluminum foil. These items cannot withstand high cleaning temperatures.
DO NOT line the oven walls, racks, bottom or any other part of the range
with aluminum foil. Doing so will destroy heat distribution, produce poor baking results
and cause permanent damage to the oven interior (aluminum foil will melt to the interior
surface of the oven).
3. Oven racks should be removed, or else their finish will dull and their color turn slightly
blue. If they do go through the self-clean cycle, wait until the oven has cooled, then
remove the racks and rub their sides with wax paper or a cloth containing a small
amount of baby or salad oil (this will make the racks glide easier back into their
positions).
4. Remove any excess spill-overs in the oven cavity before starting the self-cleaning cycle.
To clean, use hot, soapy water and a cloth. Large spill-overs can cause heavy smoke or
fire when subjected to high temperatures. DO NOT allow food spills with a high sugar or
acid content (such as milk, tomatoes, sauerkraut, fruit juices or pie filling) to remain on
the surface as they may cause a dull spot even after cleaning.
5. Clean any soil from the oven frame, the door liner outside the oven door gasket, and the
small area at the front center of the oven bottom. These areas heat sufficiently to burn
soil on. Clean with soap and water.
If at any time when setting the oven for the Self-Cleaning feature, the oven control
continuously beeps and the display shows “dr”; close the oven door (See Figure 1).
Figure 1
NOTE: Prior to setting the Self-Clean cycle, any spills remaining on the oven
bottom should be removed.
The bake element is designed to be tilted up using your hand from the front of
the bake element (See Fig. 2). This will allow easier access to the oven bottom
for cleaning. Be careful not to raise the element more than 4 or 5 inches from
the resting position.
The bake element
may be tilted about
4 or 5 inches
to clean oven bottom
Figure 2
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Self-Cleaning
To Start Self-Clean Cycle
The CLEAN
pad controls the Self-Cleaning feature. If you are planning to use the oven directly after a self-clean
cycle remember to allow time for the oven to cool down and the oven door to unlock. This normally takes about one hour.
So to self-clean for 3 hours will actually take about 4 hours to complete.
*It is recommend to use a 2 hour self-clean cycle for light soils, a 3 hour cycle for average soils, and a 4 hour cycle for
heavy soils (to assure satisfactory results).
During the self-cleaning cycle, the outside of the range can become very hot to the touch. DO NOT leave
small children unattended near the appliance; they may be burned if they touch the hot oven door surfaces.
DO NOT force the oven door open. This can damage the automatic door locking system. Use care when
opening the oven door after the self-cleaning cycle. Stand to the side of the oven when opening the door to allow hot air or
steam to escape. The oven may still be VERY HOT.
INSTRUCTIONS
PRESS
DISPLAY
To set the controls for a 3 hour Self-Cleaning cycle
to start immediately and shut off automatically:
1. Be sure the clock is set with the correct time of day and the
oven door is closed.
2. Press
. "CLEAN" will flash and "3:00" will show in the
Figure 1
Figure 2
display (Fig. 1). The control will automatically clean for a 3 hour
period (default self-cleaning cycle time). Note: If a 2 or 4 hour
or
clean time is desired, press
for 2 hour or press
for a
or
4 hour clean time. Set the cleaning time based on the amount
of soil you have; light, medium or heavy (*See above).
3. Press
.The "DOOR LOCKED" icon will flash; "CLEAN"
icon and the letters "CLn" will remain on in the display (Fig. 2).
4. As soon as the control is set, the motor driven oven door lock
will begin to close automatically. Once the door has been
locked the "DOOR LOCKED" indicator light will stop flashing
and remain on. Also, the oven icon will appear in the display
(Fig. 3).
Figure 3
Figure 4
Note: Allow about 15 seconds for the oven door lock to close.
When the Self-Clean Cycle has completed:
1. The time of day, the "DOOR LOCKED" and "CLEAN" icon will
remain in the display (Fig. 4).
Figure 5
2. Once the oven has cooled down for approximately 1 HOUR, and
the "DOOR LOCKED" icon is no longer displayed, the oven
door can then be opened (Fig. 5).
Stopping or Interrupting a Self-Cleaning Cycle:
If it becomes necessary to stop or interrupt a self-cleaning cycle
due to excessive smoke or fire in the oven:
1. Press
.
2. Once the oven has cooled down for approximately 1 HOUR and
the "DOOR LOCKED" icon is no longer displayed,the oven door
can then be opened (Fig. 5).
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Self-Cleaning
To Start Delayed Self-Clean Cycle
The CLEAN
, STOP TIME
pads and length of clean cycle, controls the Delayed Self-Clean operation. The
automatic timer will turn the oven on and off at the time you select in advance. Be sure to review TO START THE SELF-
CLEAN CYCLE for recommended clean times.
During the self-cleaning cycle, the outside of the range can become very hot to the touch. DO NOT leave
small children unattended near the appliance.
DO NOT force the oven door open. This can damage the automatic door locking system. Use care when
opening the oven door after the self-cleaning cycle. Stand to the side of the oven when opening the door to allow hot air or
steam to escape. The oven may still be VERY HOT.
INSTRUCTIONS
PRESS
DISPLAY
To set the control for the Self-Cleaning Cycle to start at a
delayed time and shut off automatically: (example 3 hour self-
clean cycle to finish at 9:00):
1. Be sure the clock is set with the correct time of day and the
oven door is closed.
Figure 1
Figure 2
Figure 3
2. Press
. "CLEAN" will flash and "3:00" will show in the
display (Fig. 1). The control will automatically clean for a 3 hour
period (default self-cleaning cycle time). Note: If a 2 or 4 hour
or
clean time is desired, press
for 2 hour or press
for a
or
4 hour clean time. Set the cleaning time based on the amount
of soil you have; light, medium or heavy (*See page 28).
3. Press
.The "DOOR LOCKED" icon will flash; "CLEAN"
icon and the letters "CLn" will remain on in the display (Fig. 2).
4. Press
(Fig. 3). Enter the desired stop time using the
Figure 4
Figure 5
number pads
(Fig. 4).
5. Press
. The "CLn" icon will turn off; "DELAY", "DOOR
LOCKED" and "CLEAN" icons will remain on.
6. As soon as the control is set, the motor driven oven door lock
will begin to close automatically and once the door has been
locked the "DOOR LOCKED" indicator light will quit flashing
and remain on. The oven icon will appear in the display (Fig. 5).
7. The control will calculate backward from the set stop time to
determine when the self-cleaning cycle should begin. The self-
cleaning cycle will come on automatically at the calculated
time. At that time, the icon "DELAY" will go out; "CLEAN" and
"CLn" will appear in the display (Fig. 6).
Figure 6
When the Self-Clean Cycle has completed:
1. The time of day, the "DOOR LOCKED" and "CLEAN" icon will
remain in the display (Fig. 7).
2. Once the oven has cooled down for approximately 1 HOUR, and
the icon "DOOR LOCKED" icon is no longer displayed, the
oven door can then be opened (Fig. 8).
Figure 7
Figure 8
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Self-Cleaning
To Start Delayed Self-Clean Cycle (cont’d)
INSTRUCTIONS
PRESS
DISPLAY
Stopping or Interrupting a Self-Cleaning Cycle
If it becomes necessary to stop or interrupt a self-cleaning cycle
due to excessive smoke or fire in the oven:
1. Press
.
2. Once the oven has cooled down for approximately 1 HOUR and
the "DOOR LOCKED" icon is no longer displayed, the oven
door can then be opened (Fig. 2-1).
Figure 2-1
Adjusting Oven Temperature
Note:The oven
The temperature in the oven has been pre-set at the factory. When first using the oven, be
sure to follow recipe times and temperatures. If you think the oven is too hot or too cool, the
temperature in the oven can be adjusted. Before adjusting, test a recipe by using a
temperature setting that is higher or lower than the recommended temperature. The baking
results should help you to decide how much of an adjustment is needed.
temperatureadjustments
made with this feature will
not change the Self-Clean
cycletemperature.
INSTRUCTIONS
PRESS
DISPLAY
To adjust the oven temperature higher:
1. Press
2. To increase the temperature use the number pads to enter the
desired change. (Example 30°F) (Fig. 2). The
temperature may be increased upwards as much as 35°F.
3. Press to accept the temperature change and the display
will return to the time of day (Fig. 3). Press to reject the
for 6 seconds (Fig. 1).
Figure 1
Figure 2
Figure 3
change if necessary.
To adjust the oven temperature lower:
1. Press
2. To decrease the temperature use the number pads to enter the
desired change. (Example -30°F) and then press
(Fig. 5). The temperature may be decreased as much as
35°F.
3. Press
will return to the time of day (Fig. 6). Press
change if necessary.
for 6 seconds (Fig. 4).
Figure 4
Figure 5
Figure 6
to accept the temperature change and the display
to reject the
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Care & Cleaning
(Cleaning Chart)
How to Clean
Surfaces
Use hot, soapy water and a cloth. Dry with a clean cloth.
Aluminum & Vinyl
For general cleaning, use hot, soapy water and a cloth. For more difficult soils and built-up
grease, apply a liquid detergent directly onto the soil. Leave on soil for 30 to 60 minutes.
Rinse with a damp cloth and dry. DO NOT use abrasive cleaners on any of these
materials; they can scratch. To remove control knobs, turn to the OFF position; grasp
firmly and pull straight off the shaft. To replace knobs after cleaning, line up the flat sides
of both the knob and the shaft; then push the knob into place.
Painted and Plastic
Control Knobs, Body
Parts, and Decorative
Trim
Before cleaning the control panel, turn all controls to OFF and remove the control knobs.
To remove, pull each knob straight off the shaft. Clean using hot, soapy water and a
dishcloth. Rinse with a clean water using a dishcloth. Be sure to squeeze excess water
from the cloth before wiping the panel; especially when wiping around the controls. Excess
water in or around the controls may cause damage to the appliance.To replace knobs after
cleaning, line up the flat sides of both the knob and the shaft; then push the knob into
place.
StainlessSteel,Chrome
ControlPanel, Decorative
Trim
Clean stainless steel with hot, soapy water and a dishcloth. Rinse with clean water and a
cloth. Do not use cleaners with high concentrations of chlorides or chlorines. Do not
use harsh scrubbing cleaners. Only use kitchen cleaners that are especially made for
cleaning stainless steel. Always be sure to rinse the cleaners from the surface as bluish
stains may occur during heating that cannot be removed.
PorcelainEnamelBroiler
Pan and Insert, Door
Liner, Body Parts,
Gentle scouring with a soapy scouring pad will remove most spots. Rinse with a 1:1
solution of clear water and ammonia. If necessary, cover difficult spots with an ammonia-
soaked paper towel for 30 to 40 minutes. Rinse with clean water and a damp cloth, and
then scrub with a soap-filled scouring pad. Rinse and wipe dry with a clean cloth. Remove
all cleaners or the porcelain may become damaged during future heating. DO NOT use
spray oven cleaners on the cooktop.
WarmingDrawer
Oven Racks
Oven racks should be removed from the oven during the self-clean cycle for cleaning.
When removed, clean by using a mild, abrasive cleaner following manufacturer's
instructions. Rinse with clean water and dry.
If the racks are cleaned in the self-clean cycle, their color will turn slightly blue and the
finish will be dull. After the self-clean cycle is complete, and the oven has cooled, rub the
sides of the racks with wax paper or a cloth containing a small amount of baby oil or salad
oil (this will make the racks glide easier into the rack positions).
Oven Door
To clean oven door, wash with hot, soapy water and a clean cloth. DO NOT immerse the
door in water.
DO NOT clean the oven door gasket. The oven door gasket is made of a woven material,
on self cleaning models, which is essential for a good seal. Care should be taken not to
rub, damage or remove the gasket.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Care & Cleaning
Cooktop Cleaning and Maintenance
Consistent and proper cleaning is essential to maintaining your ceramic glass cooktop.
Prior to using your cooktop for the first time, apply some of the cooktop cleaning cream supplied with your new range.
Buff with a non-abrasive cloth or pad (such as a 3M Scotch-Brite® Blue Multi-Purpose No Scratch Scrub Sponge). This
will make cleaning easier when soiled from cooking. The special cooktop cleaning cream leaves a protective finish on
the glass to help prevent scratches and abrasions.
Sliding aluminum or copper clad bottom pans on the cooktop can
cause metal markings on the cooktop surface. These marks
should be removed immediately after the cooktop has cooled
using the cooktop cleaning cream. Metal marks can become
permanent if not removed prior to future use.
Cookware (cast iron, metal, ceramic or glass) with rough bottoms
can mark or scratch the cooktop surface. Do not slide anything
metal or glass across the cooktop. Do not use your cooktop as a
cutting board or work surface in the kitchen. Do not cook foods
directly on the cooktop surface without a pan. Do not drop heavy
or hard objects on the glass cooktop, they may cause it to crack.
Cleaning Recommendations for the Ceramic Glass Cooktop
Before cleaning the cooktop, be sure the controls are turned to OFF and the cooktop is COOL.
DO NOT use a cooktop cleaner on a hot cooktop. The fumes can be hazardous to your health, and can
chemically damage the ceramic-glass surface.
For light to moderate soil:
Apply a few drops of the cooktop cleaning cream (cleaner must be recommended for Ceramic cooktops) directly to
the cooktop. Use a paper towel or a 3M Scotch-Brite® Blue Multi-Purpose No Scratch Scrub Sponge to clean the entire
cooktop surface. Make sure the cooktop is cleaned thoroughly, leaving no residue.
For heavy, burned on soil:
Apply a few drops of the cooktop cleaning cream (cleaner must be recommended for Ceramic cooktops) directly to
the soiled area. Rub the soiled area using a 3M Scotch-Brite® Blue Multi-Purpose No Scratch Scrub Sponge, applying
pressure as needed. Once the sponge has been used on the cooktop, do not use the sponge for any other purpose.
If soils remain, carefully scrape soils with a metal razor blade
scraper, holding scraper at a 30 degree angle to the surface. Remove
loosened soils with cooktop cleaner and buff surface clean.
Plastic or foods with a high sugar content:
These types of soils need be removed immediately if spilled or
melted onto the ceramic cooktop surface. Permanent damage (such
as pitting of the cooktop surface) may occur if not removed
immediately. After turning the surface elements OFF, use a razor
blade scraper or a metal spatula with a mitt and scrape the soil from
the hot surface (as illustrated). Allow the cooktop to cool, and use
the same method for heavy or burned on soils.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Care & Cleaning
Cleaning Recommendations for the Ceramic Glass Cooktop (cont’d)
Do not use the following on the ceramic glass cooktop:
• Do not use abrasive cleaners and scouring pads, such as metal and
some nylon pads. They may scratch the cooktop, making it more
difficult to clean.
• Do not use harsh cleaners, such as chlorine bleach, ammonia or oven
cleaners, as they may etch or discolor the cooktop.
• Do not use dirty sponges, cloths or paper towels, as they can leave
soil or lint on the cooktop which can burn and cause discoloration.
Note: Additional cooktop cleaning cream may be ordered by visiting the
Removing and Replacing the Oven Door (all models)
The door is heavy. For safe, temporary storage, lay the door flat
with the inside of the door facing down.
To Remove Oven Door:
1. Open oven door completely (horizontal with floor - See Fig. 1).
2. Remove 2 screws located on the inside of the oven door liner (See A Fig.
2)
3. Insert the 2 screws into the door hinge holes located on the side of the
hinge arm, one into each hinge (See B Fig. 2).
4. Close oven door until the door stops, (Do not force the door to close any
further). The placement of these screws should keep door open in about a
45 degree position.
Fig. 1
5. Grasp oven door firmly on both sides and slide door up and off hinges at the
same angle. (See Fig. 3)
6. To clean oven door, follow the instructions provided in the Cleaning Chart at
the beginning of the Care & Cleaning section (See Door Liner).
To Replace Oven Door:
1. Be sure the hinge arms remain at the 45 degree angle position. Be sure the
screws are still locking the hinge arms from moving. If the screws fall out
of the hinge holes, the hinge(s) may snap back against the oven frame and
could pinch fingers or chip the porcelain finish on the oven front frame.
2. Hold door at the sides near the top while resting the lower front of door on
your knee. Insert the door channels at the bottom of door over the door
hinges, (See Fig. 3).
Fig. 2
3. Allow the door to slide down into the door hinges evenly at the same 45
degree angle. The hinge arms should be inserted into the bottom corners as
far as they can go.
4. Open door completely (horizontal with floor) and remove both screws from
holes in door hinges.
5. Reinstall the 2 screws into the door liner (See C Fig. 2).
6. If the door is not in alignment with the oven frame, remove door and repeat
the above steps.
Fig. 3
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Care & Cleaning
Removing and Replacing the Warming Drawer (some models)
To Remove Warming Drawer:
1.
Turn power off before removing the Warming Drawer.
2. Open the drawer to the fully opened position.
3. On the right glide you will find a shield attached with a hex-head screw
(See Figure 1). Using a 1/4” socket and ratchet remove the shield.
4. Locate glide lever on each side of drawer, pull up on the left glide lever and
push down on the right glide lever.
5. Pull the drawer away from the range.
To Replace Warming Drawer:
1. Replace shield on the right glide of the drawer body.
2. Pull the bearing glides to the front of the chassis glide (See Figure 2).
3. Align the glide on each side of the drawer with the glide slots on the range.
4. Push the drawer into the range until levers “click” (approximately 2”). Pull
the drawer open again to seat bearing glides into position. If you do not
hear the levers “click” or the bearing glides do not feel seated remove
the drawer and repeat steps 2-4. This will minimize possible damage to
the bearing glides. Using a 1/4” socket and ratchet replace the shield.
Figure 1
NOTE:TheWarmingDrawerwillNOToperatewhileinthe“Self-Clean”and“Oven
Lockout” modes.
Electrical Shock Hazard can occur and result
in serious injury or death. Disconnect appliance from electric
power before cleaning and servicing the Warming Drawer.
Figure 2
Operating and Replacing the Oven Light
Be sure the range is
unpluggedandallpartsareCOOLbefore
replacing the oven light. Wear a leather-
facedgloveforprotectionagainstpossible
broken glass.
To operate the Oven Light:
The interior oven light will automatically turn on when the oven door is
opened. Press
to turn the light ON and OFF when the oven door is
closed. The oven light is located at the rear wall of the oven interior and is
covered with a glass shield held by a wire holder (See Fig. 3). The oven light
glass shield must be in place whenever the oven is in use.
To Replace the Oven Light:
1. Turn electrical power off at the main source and unplug the range.
2. Press Wire Holder to one side to release the glass shield.
3. Replace the old bulb with a new 40 watt appliance bulb.
4. Replace Glass Shield over bulb and snap Wire Holder into place.
5. Turn power back on again at the main source (or plug in the range).
6. The clock will then need to be reset. To reset, see Setting the Clock in
this Use & Care Manual.
Figure 3
Care & Cleaning of Stainless Steel (Stainless Steel models only)
Some models are equipped with stainless steel exterior parts. Special care and cleaning are required for maintaining
the appearance of stainless parts. Please refer to the table provided at the beginning of the Care & Cleaning section in
this Use & Care Manual.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Before You Call
Solutions to Common Problems
Before you call for service, review this list. It may save you time and expense. The list includes common occurrences
that are not the result of defective workmanship or materials in this appliance.
POSSIBLE CAUSE/SOLUTION
Poor installation. Place oven rack in center of oven. Place a level on the oven rack. Adjust
leveling legs at base of range until the rack is level. When range is level, cooktop may
appear out of alignment if countertop is not level (See the Range Installation Instructions).
OCCURRENCE
Range is not level.
Weak, unstable floor. Be sure floor is level and can adequately support range. Contact a
carpenter to correct sagging or sloping floor.
Kitchen cabinet misalignment may make range appear to be unlevel. Be sure cabinets are
square and have sufficient room for range clearance.
Cannot move appliance easily.
Appliance must be accessible for
service.
Cabinets not square or are built in too tight. Contact a cabinet maker to correct the problem.
Contact builder or installer to make appliance accessible.
Carpeting interferes with range. Provide sufficient space so range can be lifted over carpet.
Surface element too hot or not hot
enough.
Incorrect surface control setting. Make sure the correct control is set for the surface area you
wish to heat.
Light-weight or warped cookware was used. Use only flat, evenly balanced, medium or
heavy-weight cookware. Flat pans heat much better than warped pans. Cookware materials
and weight of the material affect heating results. Heavy and medium-weight pans heat
evenly. Because light-weight pans heat unevenly, foods may burn easily.
Surface element does not heat.
Oven does not operate.
No electrical power to the appliance. Check steps under Entire Appliance Does Not
Operate in this Before You Call checklist.
Be sure the oven controls are set correctly for the desired function. See the Setting Oven
Controls section or Entire Appliance Does Not Operate in this Before You Call checklist.
The clock must be set with the time of day in order to operate the oven.
Make sure electrical cord/plug is plugged tightly into outlet.
Entire appliance does not operate.
Oven light(s) does not work.
Service wiring is not complete. Contact a Servicer for assistance.
Electrical power outage. Check house lights to be sure. Call your local electric company for
service.
Burned-out or loose bulb. See Operating and Replacing the Oven Lights section in this
Use & Care Manual to replace or tighten the bulb(s).
Electrical power outage. Check house lights to be sure. Call your local electric company for
service.
Meat is too close to the broil element. Reposition the rack to provide more clearance
between the meat and the oven broil element.
Oven smokes excessively during
broiling.
Meat is not properly prepared. Remove excess fat from meat. Remove remaining fatty
edges to prevent the meat from curling, but do not cut into the lean of the meat.
Broiler Pan used without the Broiler Pan Insert or insert is covered with foil. DO NOT use the
Broiler Pan without the Broiler Pan Insert or cover the insert with foil.
Broiler Pan/Insert or grease build-up undeneath the 6th rack position. Clean grease from
below the 6th rack position. Excessive smoking is caused by a build-up of grease or food
spatters. If the Broiler Pan/Insert is used often, clean them on a regular basis.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Before You Call
Solutions to Common Problems (cont’d)
POSSIBLE CAUSE/SOLUTION
OCCURRENCE
The ESEC Control will display “ - - “ in the digital display windows indicating that the ESEC
has a “Lockout” condition. This condition is normal when using the oven lockout or self-
clean features. Wait for the Self-Clean cycle to completely finish or if using the Oven
Lockout feature, press the Lock control pad to unlock the oven door.
ESEC displays “ - - “ message.
This oven is equipped with a state of the art electronic oven controller. Among the many
features is a full time oven circuit diagnostics system. The controller constantly monitors the
internal circuitry as well as several crucial oven circuits to insure they are all operating
correctly. If at any time one of these systems fails, the controller will immediately stop the
current operation and beep continuously (flashing an error code of “F1, F2, F3, or F9” in the
controller display window.
Oven electronic control beeps and
displays “F1, F2, F3, or F9.”
Electronic control has detected a fault condition. Press CLEAR/OFF to clear the display and
stop the beeping. Reprogram oven. If fault remains, record fault number. Press CLEAR/OFF
and contact a Servicer.
ESEC control has detected a fault condition. Turn all surface control knobs to OFF and reset
the clock with the correct time of day if necessary. If the “Er” message remains, contact a
Servicer.
ESEC displays “Er” message.
The ESEC control constantly monitors the internal circuitry as well as several circuits to
insure they are all operating correctly. If at any time one of these systems fails, the ESEC
will immediately stop the current operation and flash an error code of “F5, F6, or F7” in the
digital display window. If any of these error messages remain or reappear in the display,
contact a Servicer.
ESEC displays “F5, F6 or F7”
message.
The oven control will only accept correct responses and/or the minimum number of
allowable entries for the appropriate feature. The oven control is designed to prevent
accidental entries. Review the instructions in this Use & Care Manual for the feature you are
trying to use. Also review the minimum and maximum temperature entries for the feature
you are trying to set on page 15 in this Use & Care Manual.
Oven control beeps when you try
to enter times or temperatures
Poor baking results.
Many factors affect baking results. Make sure the proper rack position is being used. Center
food in the oven and space pans to allow air to circulate. Allow the oven to preheat to the
set temperature before placing food in the oven. Try adjusting the recipe's recommended
temperature or baking time. If you feel the oven is cooking too hot or cool, see Adjusting
the Oven Temperature in this Use & Care Manual.
Self-Cleaning cycle does not work. Controls are not set properly. Follow instructions in the Self-Cleaning section.
The Self-Clean feature will not operate whenever a radiant surface element is on.
Self-cleaning cycle was interrupted. Stop time must be set for 2, 3, or 4 hours past the start
time. Follow steps shown in Stopping or Interrupting a Self-Clean Cycle in the Self-
Cleaning section.
Soil is not completely removed.
Failure to clean bottom front, top of oven or door areas outside oven seal. These areas are
not in the Self-Cleaning area, but get hot enough to burn on food residue. Clean these
areas before starting the self-clean cycle. Burned-on residue may be cleaned with a stiff
nylon brush and water or a nylon scrubber. Be careful not to damage the oven gasket.
Excessive spill-overs in oven. Set Self-Clean cycle for a longer Self-Cleaning time.
Flames inside oven or smoking
from vent.
Excessive spill-overs in oven. This is normal, especially for pie spill-overs or large amounts
of grease on the oven bottom. Wipe up excessive spill-overs before starting the self-clean
cycle. If flames or excessive smoke are present, stop the Self-Clean cycle and follow the
steps shown in Stopping or Interrupting the Self-Clean Cycle in the Self-Cleaning section.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Cooking Tables
Foods for
CONVECTION
Foods for
CONVECTION
BAKE pad
ROAST pad
*Decrease
normal cook time by:
*Decrease
normal cook time by:
Frozen foods, pies,
15-25 %
Meats
Poultry(unstuffed)
15-30 %
20-30 %
pastries and pizza
Refrigerator cookies 15-35 %
Refrigerator biscuits 15-30 %
Begin with the maximum reduction in
cook times and adjust as needed.
*Recommendedreductionincook
times based on brands of food items
tested. Cook times may vary with your
specific brand of food item.
Rolls & Breads
20-25%
10-20 %
Fresh Pies/Pastries
Begin with the maximum reduction in
cook times and adjust as needed.
*Recommendedreductionincook
times based on brands of food items
tested. Cook times may vary with your
specific brand of food item.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
39
Download from Www.Somanuals.com. All Manuals Search And Download.
RANGE WARRANTY
Your range is protected by this warranty
In the U.S.A., your appliance is warranted by Electrolux Home Products North America, a division of White Consolidated Industries, Inc. We
authorize no person to change or add to any of our obligations under this warranty. Our obligations for service and parts under this warranty must
be performed by us or an authorized Electrolux Home Products North America servicer. In Canada, your appliance is warranted by WCI Canada,
Inc.
*NORMAL
This warranty applies only to products in ordinary household use, and the consumer is responsible for the
RESPONSIBILITIES items listed below:
OF THE CONSUMER
1. Proper use of the appliance in accordance with instructions provided with the product.
2. Proper installation by an authorized servicer in accordance with instructions provided with the appliance and in
accordance with all local plumbing, electrical and/or gas codes.
3. Proper connection to a grounded power supply of sufficient voltage, replacement of blown fuses, repair of loose
connections or defects in house wiring.
4. Expenses for making the appliance accessible for servicing, such as removal of trim, cupboards, shelves,etc.,
which are not a part of the appliance when it was shipped from the factory.
5. Damages to finish after installation.
6. Replacement of light bulbs and/or fluorescent tubes (on models with these features).
EXCLUSIONS
This warranty does not cover the following:
1. CONSEQUENTIAL OR INCIDENTAL DAMAGES SUCH AS PROPERTY DAMAGE AND INCIDENTAL EXPENSES
RESULTING FROM ANY BREACH OF THIS WRITTEN OR ANY IMPLIED WARRANTY.
NOTE: Some states do not allow the exclusion or limitation of incidental or consequential damages, so this
limitation or exclusion may not apply to you.
2. Service calls which do not involve malfunction or defects in workmanship or material, or for appliances not in
ordinary household use. The consumer shall pay for such service calls.
3. Damages caused by services performed by servicers other than Electrolux Home Products North America or its
authorized servicers; use of parts other than genuine Electrolux Home Products parts; obtained from persons
other than such servicers; or external causes such as abuse, misuse, inadequate power supply or acts of God.
4. Products with original serial numbers that have been removed or altered and cannot be readily determined.
IF YOU NEED
SERVICE
Keep your bill of sale, delivery slip, or some other appropriate payment record. The date on the bill establishes the
warranty period should service be required. If service is performed, it is in your best interest to obtain and keep all
receipts. This written warranty gives you specific legal rights. You may also have other rights that vary from state to state.
Service under this warranty must be obtained by contacting Electrolux Home Products:
This warranty only applies in the 50 states of the U.S.A., Puerto Rico, and Canada. Product features or specifications as described or illustrated are
subject to change without notice. All warranties are made by Electrolux Home Products North America, a division of White Consolidated Industries,
Inc. In Canada, your appliance is warranted by WCI Canada, Inc.
03-U-RA-01 (rev. 01/2001)
USA
Canada
800•944•9044
Electrolux Home Products North America
P.O. Box 212378
866•213•9397 (English)
866•294•9911 (French)
Electrolux Home Products North America
6150 McLaughlin Road
Mississauga, Ontario, Canada
L5R 4C2
Augusta, GA 30917
Download from Www.Somanuals.com. All Manuals Search And Download.
|