Fisher VCR SRT 7072 User Manual

INSTRUCTION MANUAL  
SRT-7072  
Real Time Video Recorder  
English  
Français  
Español  
Enregistreur vidéo en temps réel  
Videograbador en tiempo real  
Please read this manual and accompanying “IMPORTANT SAFETY INSTRUCTIONS” sheet carefully before connecting your  
VCR and operating it for the first time.  
Be sure to read carefully and follow all the PRECAUTIONS on page 1.  
Keep the manual in a safe place for future reference.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FEATURES  
CONTENTS  
PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1  
FEATURES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2  
ACCESSORY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2  
œ JOG/SHUTTLE operation  
œ Can also be controlled through an RS-232C or RS-485  
connection  
œ Clog detection  
œ High-speed Fast Forward/Rewind  
œ Field recording/playback  
LOCATIONS OF CONTROLS AND  
INDICATORS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3  
œ 8, 24, 40, 64 and 96-hour mode recording (T-160)  
œ 6, 18, 30, 48 and 72-hour mode recording (T-120)  
CONNECTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6  
TYPES OF ON-SCREEN DISPLAYS AND  
œ In 8, 24, 40-hour modes audio recording is available  
DISPLAY SEQUENCE . . . . . . . . . . . . . . . . . . . . . . 7  
(T-160)  
SETTING THE LANGUAGE AND CLOCK . . . . . . . . . . . 9  
CHANGING THE ON-SCREEN DISPLAY . . . . . . . . . . 10  
VIDEO CASSETTE TAPES . . . . . . . . . . . . . . . . . . . . . 11  
NORMAL RECORDING . . . . . . . . . . . . . . . . . . . . . . . . 13  
AUTOREPEAT RECORDING. . . . . . . . . . . . . . . . . . . . 16  
ALARM RECORDING. . . . . . . . . . . . . . . . . . . . . . . . . . 17  
PROGRAM TIMER RECORDING . . . . . . . . . . . . . . . . 20  
œ In 6, 18, 30-hour modes audio recording is available  
(T-120)  
œ Autorepeat recording  
œ Series recording function  
œ Alarm recording function  
œ On-screen mode setting  
œ Integrated time date generator  
œ Day/Time search function  
œ Alarm scan/search function  
œ Forward/Reverse frame advance function  
œ 30-day memory backup  
RECORDING USING AN  
EXTERNAL TIMER INPUT . . . . . . . . . . . . . . . . . . 24  
œ Security lock  
SERIES RECORDING . . . . . . . . . . . . . . . . . . . . . . . . . 25  
NORMAL PLAYBACK. . . . . . . . . . . . . . . . . . . . . . . . . . 27  
SPECIAL PLAYBACK. . . . . . . . . . . . . . . . . . . . . . . . . . 28  
TAPE COUNTER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30  
SETTING THE SECURITY LOCK . . . . . . . . . . . . . . . . 30  
SETTING THE BUZZER. . . . . . . . . . . . . . . . . . . . . . . . 31  
CLOCK ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . 31  
SETTING THE CASSETTE EJECT MODE . . . . . . . . . 32  
œ Recording check function  
œ Automatic head cleaning function  
ACCESSORY  
Power cord  
SETTING THE RS-232C OR RS-485  
DATA TRANSFER SPEED . . . . . . . . . . . . . . . . . . 33  
CHECKING POWER FAILURE,  
FAILURE DUE TO CONDENSATION AND  
USAGE DURATION . . . . . . . . . . . . . . . . . . . . . . . 34  
OUTPUT TERMINALS . . . . . . . . . . . . . . . . . . . . . . . . . 35  
MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38  
TROUBLESHOOTING GUIDE . . . . . . . . . . . . . . . . . . . 40  
SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41  
WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42  
2
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LOCATIONS OF CONTROLS AND INDICATORS  
Front Panel  
12 3 4 5 6  
7
8 9 F  
G H  
T
O
MENU  
REC/PLAY  
PLAY  
(REC CHECK)  
]
SHIFT  
«
«
l
SPEED  
j
l
j
»
COUNTER  
TRACKING  
– V.STILL +  
STILL  
PAUSE  
RESET MEMORY  
TIMER  
REPEAT  
REC  
OFF  
ON SCREEN  
OFF  
ON  
TAPE  
SELECT  
ON  
SEARCH  
STOP  
ALARM  
SHARPNESS  
POWER  
REPEAT  
SPEED  
DURATION  
8H  
20S  
PROG.  
CC  
T-160  
24H  
NC  
T-120  
a
i
REC  
EJECT  
SOFT SHARP  
MENU RESET  
ALL RESET  
XW V UTSRQ I P  
O
N
M
L
K J  
I
1 TIMER button  
2 COUNTER RESET button  
M Digital display panel  
N POWER indicator  
3 SHIFT ] or « (display position down or right) button  
4 COUNTER MEMORY button  
O REPEAT (autorepeat recording) indicator  
P REC (record) button  
5 REC/PLAY SPEED l or j (decrease or increase  
Q REPEAT REC (autorepeat recording) switch  
R ALARM DURATION (alarm recording time) switch  
S ALARM SPEED (alarm recording speed) switch  
T ON SCREEN switch  
recording/playback speed mode) button  
6 TRACKING/V. STILL – or + button  
7 Cassette loading slot  
8 PLAY (REC CHECK) button  
9 STILL/PAUSE button  
F JOG dial  
U TAPE SELECT switch  
V ALL RESET button  
W MENU RESET button  
G SHUTTLE ring  
X SHARPNESS control  
H MENU button  
NOTE:  
I Front door  
œ Buttons 3 and 5 are also used for menu control.  
J SEARCH button  
K STOP button  
L EJECT button  
English  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
LOCATIONS OF CONTROLS AND INDICATORS  
Digital Display  
5 Mode display  
œ Recording/playback  
1
2
3
4
5
speed mode  
œ Alarm search mode  
œ Alarm scan mode  
œ Dew display  
OFF  
E
H
M
S
M
G F 9 8  
7
6
1 Operation Indicators  
5, 6 Mode display  
œ They display the actual operation mode.  
œ Day/Time search  
mode  
Operation Mode  
Indicator  
Record (REC)  
Record pause (REC PAUSE)  
Playback (PLAY)  
6 Counter display  
œ Time display  
Still image (STILL)  
Fast forward (FF)  
Rewind (REW)  
œ Linear time counter  
Forward picture search  
Reverse picture search  
display  
H
M
S
Reverse playback  
OFF  
7 OFF indicator  
Field shift forward  
Comes on when the tape end has been reached after  
a recording, except during autorepeat recording mode.  
Field shift backward  
M
œ Clog detection indicator  
8 Counter memory indicator  
Flashes when the recording quality deteriorates  
due to dirty VCR heads.  
Comes on when the counter memory function is  
engaged.  
9 Timer Recording indicator  
2 Cassette indicator  
Comes on when in timer recording stand-by mode, or  
during a timer recording.  
Comes on when a cassette is loaded.  
3 Alarm indicator  
F Security lock indicator  
Flashes when an alarm is  
being recorded:  
Comes on when the security lock is engaged.  
G External input indicator  
E
Comes on after the alarm  
has been recorded:  
Comes on when recording using the EXT TIMER IN  
input terminal.  
4 Power failure indicator  
Comes on after a power failure.  
4
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LOCATIONS OF CONTROLS AND INDICATORS  
Back Panel  
1
2
3
H
EXT  
WARNING TAPE  
SW  
ALARM  
OUT  
TIMER IN COM  
OUT END OUT OUT  
COM  
IN  
IN  
A
RS485  
B
CLOCK SET  
SERIES OUT/ SERIES  
TIMER  
OUT  
EJECT  
OUT  
OUT  
IN  
NON REC OUT  
IN  
COM  
ADDRESS  
ON  
TERMINATE  
ON  
485  
232  
PUSH  
OPEN  
OFF  
OFF  
AUDIO  
VIDEO  
IN  
OUT  
IN  
OUT  
REMOTE MIC IN  
AC IN ~  
RS232C  
X
W
V U T S R Q  
Pin locations  
Pin locations  
4 5 6 7 8 9 F G  
(female) on the VCR  
(male) on the VCR  
EXT  
WARNING TAPE  
SW  
ALARM  
OUT  
TIMER IN COM  
OUT END OUT OUT  
COM  
IN  
1
5
NOTE:  
This terminal board  
CLOCK SET  
SERIES OUT/ SERIES  
TIMER  
OUT  
EJECT  
OUT  
OUT  
IN  
NON REC OUT  
IN  
COM  
IN  
may be damaged by  
5kg-cm or more torque  
and using φ6mm-tip or  
more size screwdrivers.  
1
6
6
9
NOTE:  
Do not connect to  
phone line.  
P O N M L K J I  
1 RS485 A connector (RJ11 type)  
2 RS485 B connector (RJ11 type)  
3 DIP switches  
K TIMER OUT (timer recording output) terminal  
L COM (common) terminal  
M SERIES IN (series recording trigger input) terminal  
œ Used when controlling the VCR through the RS485  
N SERIES OUT/NON REC OUT (series recording  
or the RS232C connectors.  
trigger output/non recording output) terminal  
4 EXT TIMER IN (external timer input) terminal  
5 COM (common) terminal  
O CLOCK SET IN (external clock set trigger input)  
terminal  
P CLOCK SET OUT (external clock set trigger output)  
6 WARNING OUT (warning output) terminal  
7 TAPE END OUT (tape end output) terminal  
8 SW OUT (switch output) terminal  
9 COM (common) terminal  
terminal  
Q VIDEO OUT (video output) jack  
R VIDEO IN (video input) jack  
S AUDIO OUT (audio output) jack  
T AUDIO IN (audio input) jack  
U MIC IN (microphone input) jack  
V REMOTE (remote control input) jack  
W RS232C connector (D-sub 9-pin type)  
X AC power input  
F ALARM OUT (alarm output) terminal  
G ALARM IN (alarm input) terminal  
H Battery compartment  
I EJECT IN (eject trigger input) terminal  
J EJECT OUT (eject trigger output) terminal  
English  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTIONS  
Connect the video camera and monitor TV as shown in the figure below.  
NOTE: Before making the connections, make sure the devices are disconnected from the power outlet.  
Monitor TV (sold separately)  
Video camera  
(sold separately)  
To  
VIDEO IN  
jack  
From an external  
audio source  
EXT  
WARNING TAPE  
SW  
ALARM  
OUT  
TIMER IN COM  
OUT END OUT OUT  
CO
IN  
IN  
A
RS485  
B
CLOCK SET  
SERIES OUT/ SERIES  
TIM
OU
EJECT  
OUT  
OUT  
IN  
NON REC OUT  
IN  
COM  
ADDRESS  
ON  
TERMINATE  
ON  
485  
PUSH  
OPEN  
OFF  
OFF  
232  
AUDIO  
IN OUT  
VIDEO  
IN  
OUT  
REMOTE MIC IN  
AC IN ~  
RS232C  
Power cord  
To  
VIDEO  
OUT  
jack  
Coaxial cable  
To remote control  
(sold separately)  
To outlet  
(sold separately)  
NOTES:  
Power Cord Installation  
œ For more details, please refer to the manuals  
accompanying all other devices. If the connections are  
not made properly, it may cause a fire or damage the  
equipment.  
1 Plug the supplied power cord firmly into the AC power  
input AC IN ~ socket.  
2 Insert the plug of this power cord into a outlet.  
œ You can use a VA-RMN01 Remote Control Unit (sold  
separately) to control remotely the VCR.  
About the memory reset  
œ The grounded power cord (3 pin plug) must be  
If the VCR location is changed or to cancel previous  
settings, please reset the memory as described below.  
connected to a grounded power outlet.  
œ If there is no video signal when the power is turned on,  
All the settings as the time and date will be reset, and the  
security lock will be cancelled.  
“NO VIDEO” will be displayed on-screen.  
To reset the memory, press the ALL RESET button.  
6
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TYPES OF ON-SCREEN DISPLAYS AND  
DISPLAY SEQUENCE  
Reference pages are shown in square brackets.  
Monitor TV screen (normal screen)  
10-15-99 FRI 000  
15:20:00  
8
Set the ON SCREEN  
switch to the “ON” position  
Press the  
MENU button  
[20-24]  
[9, 25, 36, 37]  
SET UP 1 menu  
TIMER SET menu  
<SET UP 1>  
D
<TIMER SET>  
To set various VCR functions  
D
To set timer recordings  
Press the  
MENU button  
Press the  
MENU button  
Press the SEARCH button  
Press the SEARCH button  
[10, 31]  
[22]  
SET UP 2 menu  
HOLIDAY SET menu  
<SET UP 2>  
D
<HOLIDAY SET>  
D
To set various VCR functions  
To set the holidays  
Press the  
MENU button  
Press the  
MENU button  
Press the SEARCH button  
Press the SEARCH button  
[18]  
[17, 27, 31, 12, 16, 35, 15, 25, 36, 33]  
SET UP 3 menu  
ALARM TIME menu  
<SET UP 3>  
<ALARM TIME>  
DTo set various VCR functions  
D
To display the number, date and  
time of the alarm recordings  
Press the  
MENU button  
Press the  
MENU button  
Press the SEARCH button  
Press the SEARCH button  
POWER FAILURE/DEW/  
USED TIME menu  
[36, 12, 14, 32]  
[34]  
D
SET UP 4 menu  
<SET UP 4>  
To display the number and  
duration of power failures  
DTo set various VCR function  
<POWER FAILURE>  
D
To display the number and duration  
of failures due to condensation  
<DEW>  
D
To display the time used  
<USED TIME>  
Press the  
MENU button  
Press the  
MENU button  
Press the SEARCH button  
Press the SEARCH button  
English  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
TYPES OF ON-SCREEN DISPLAYS AND DISPLAY SEQUENCE  
NOTES:  
Using the JOG dial and SHUTTLE ring  
œ When a menu is displayed, recording will not be  
JOG dial  
possible.  
œ Put the tip of your index finger into the depression then  
œ Press the SEARCH or MENU button, the setting  
turn the dial in any direction.  
procedure is now completed.  
œ When a menu is displayed, turn the dial clockwise and  
the cursor will move to the right (or down). Turn the dial  
counterclockwise and the cursor will move to the left  
(or up).  
œ During recording or playback the menus cannot be  
displayed.  
œ To reset the settings of a menu to their original values,  
select the desired menu then press the MENU RESET  
button. The (USED TIME) menu data cannot be reset.  
SHUTTLE ring  
œ To enter the settings use the JOG dial or SHUTTLE  
œ When a menu is displayed, turn the ring of 10° or more  
clockwise and the selected data setting will change or  
the selected setting value will increase. Turn the ring of  
10° or more counterclockwise and the selected data  
setting will change or the selected setting value will  
decrease.  
ring.  
œ If held for 1 second or more the changes will be made  
sequentially.  
8
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETTING THE LANGUAGE AND CLOCK  
5 Turn the SHUTTLE ring to set the month the daylight  
Language Setting  
saving time adjustment is made, then turn the JOG  
English, French or Spanish can be selected by the user.  
dial clockwise.  
1 Turn the power on to all devices used.  
01, 02,.....11, 12 (for January,  
February......November, December)  
2 Press the MENU button to display the (SET UP 1)  
menu.  
6 Turn the SHUTTLE ring to set the time the daylight  
@@@@@@@<SET@UP@1>  
saving time adjustment is made.  
öDAYLIGHT@SET@@@@@NO@USE  
@@@@@@@@WEEK@MONTH@TIME  
@ON@@@1ST-SUN@@04@02:00  
@OFF@@LST-SUN@@10@02:00  
öOUTPUT@@@@@@@@SERIES  
öCLOCK@SET  
@01-01-00@SAT@@00:00:00  
öREMOTE@@@@@@@@EJECT  
öLANGUAGE-LANGUE-IDIOMA  
@@@ENGLISH  
7 Turn the JOG dial clockwise, until “LST” is flashing.  
8 Following the same procedure as above (steps 4 to  
6), set when the time is changed back from daylight  
saving time to standard time.  
3 Turn the JOG dial, until “ENGLISH” is flashing.  
9 Turn the JOG dial clockwise, until the “CLOCK SET”  
setting is flashing.  
4 Turn the SHUTTLE ring to select the language of  
your choice.  
F Turn the SHUTTLE ring to set the month (ex: 10),  
then turn the JOG dial clockwise.  
5 Press the SEARCH button to save the setting.  
ø The day of week is set automatically.  
G Turn the SHUTTLE ring to set the day (ex: 15), then  
turn the JOG dial clockwise.  
Clock setting  
Example: To set the clock to October 15, 1999 at 3:20  
H Turn the SHUTTLE ring to set the year (ex: 99 for  
1999), then turn the JOG dial clockwise.  
PM (15:20).  
1 Press the MENU button to display the (SET UP 1)  
ø The last 2 digits only are displayed.  
menu.  
I Turn the SHUTTLE ring to set the hours (ex: 15 for 3  
PM), then turn the JOG dial clockwise.  
2 Turn the SHUTTLE ring, to set the auto daylight  
saving time/standard time adjustment.  
J Turn the SHUTTLE ring to set the minutes (ex: 20),  
then turn the JOG dial clockwise.  
NO USE. . . . No daylight saving time/standard  
time adjustment is made.  
@@@@@@@<SET@UP@1>  
USE . . . . . . . The auto daylight saving time/  
standard time adjustment is made.  
öDAYLIGHT@SET@@@@@USE  
@@@@@@@@WEEK@MONTH@TIME  
@ON@@@1ST-SUN@@04@02:00  
@OFF@@LST-SUN@@10@02:00  
öOUTPUT@@@@@@@@SERIES  
öCLOCK@SET  
3 Turn the JOG dial clockwise, until “1ST” is flashing.  
@10-15-99@FRI@@15:20:00  
öREMOTE@@@@@@@@EJECT  
öLANGUAGE-LANGUE-IDIOMA  
@@@ENGLISH  
4 Set the day the daylight saving time adjustment is  
made.  
œ Turn the SHUTTLE ring to set the week, then turn  
the JOG dial clockwise.  
K
1ST, 2ND, 3RD, 4TH or LST (first, second, third,  
fourth or last)  
œ Turn the SHUTTLE ring to set the day of week,  
then turn the JOG dial clockwise.  
SUN, MON, TUE, ...... SAT (Sunday, Monday,  
Tuesday....Saturday)  
CHANGING THE ON-SCREEN DISPLAY  
Selecting the On-screen Display  
You can select to display or not the date, time, the  
VIDEO CASSETTE TAPES  
Use only video cassette tapes bearing the w logo. This  
Loading  
VCR was primarily designed for use with T-120 or T-160  
cassette tapes, it is recommended to use T-120 or T-160  
standard grade VHS video cassette tapes for optimal  
performance.  
1 Place the cassette, label side up, in the loading slot.  
Gently push the center of the cassette until it is  
loaded automatically.  
Handling Cassette Tapes  
The cassette tapes should always be stored vertically, in  
their cases, away from high temperatures, magnetic  
fields, direct sunlight, dirt, dust and locations subject to  
mold formation.  
Do not tamper with the cassette mechanism and never  
touch the tape with your fingers.  
ø The time display will switch to the reset counter  
“0:00:00” display.  
Protect the cassette tapes from shocks or strong  
vibrations.  
ø After the cassette tape is loaded, a mechanism  
will operate for about 5 seconds to check that  
the tape has been threaded correctly and the  
cassette indicator owill blink during that  
period.  
To Protect your Recordings  
After having recorded a tape, if you wish to keep the  
recording, use a flathead screwdriver to break off the  
erasure-prevention tab on the cassette.  
ø When the cassette is loaded, if the tape has  
been threaded correctly, the cassette indicator  
owill light on the digital display.  
To record again on a tape without erasure-prevention tab,  
cover the hole with adhesive tape.  
NOTE:  
œ If you try to record on a cassette without  
erasure-prevention tab, the VCR will eject the cassette.  
Unloading  
1 In stop mode, press the EJECT button.  
ø The cassette is automatically ejected.  
Erasure-prevention tab  
NOTES:  
œ Do not insert any object in the cassette loading slot, as  
Precautions concerning the video  
cassette tapes  
œ Do not use tapes that are damaged, tapes that have  
been cut and repaired or tapes that have been altered  
in any way.  
that may cause injury and damages to the VCR.  
œ If your hand gets stuck in the cassette loading slot,  
unplug the power cord and consult the dealer where  
the unit was bought. Do not forcibly pull the hand out  
as that may cause severe injuries.  
œ Some rewinders may entangle the tape, and therefore  
their use is not recommended.  
œ When tapes are recorded over and over again, the  
recording quality will deteriorate. Refer to “Concerning  
the Number of Times Tapes can be Rerecorded on” on  
page 14, and replace the tape with a new tape as  
required.  
English  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VIDEO CASSETTE TAPES  
Correct tape thread check function  
Setting the Action to Take When a  
Cassette is Loaded  
In the (SET UP 3) menu, you can set the mode the VCR  
will go into when a cassette is loaded.  
If the correct tape thread check function is on, after the  
cassette tape is loaded, a mechanism will operate for  
about 5 seconds to check that the tape has been  
threaded (loaded) correctly and the cassette indicator “o”  
will blink during that period. If the tape is not loaded  
properly, the cassette will be ejected.  
1 Press the MENU button until the (SET UP 3) menu is  
displayed.  
@@@@@@@<SET@UP@3>  
NOTES:  
öALARM@MODE@@@@@@@Y1  
öALARM@DURATION@@@20S  
öVERTICAL@SYNC@@@@Y  
öEXT@TIME@ADJ.@@@@01:00  
öTAPE@IN@MODE@@@@@STOP  
öTAPE@END@MODE@@@@REW  
öTAPE@END@OUT@@@@@-3M  
öCLOG@DETECT.@@@@@Y  
öSERIES@REC@IN@@@@N  
öRS-232C@@@@@@@@@@19200  
œ This function checks to make sure that the cassette  
has been correctly loaded. It is recommended to use  
this function to make sure the recordings are  
conducted reliably.  
œ If during the tape thread check operation, the REC,  
PLAY or STOP button is pressed or if the SHUTTLE  
ring is turned, the command will only be executed after  
the tape thread has been checked. Only the EJECT  
button will operate while the tape thread is being  
checked.  
2 Turn the JOG dial, until the “TAPE IN MODE” setting  
is flashing.  
3 Turn the SHUTTLE ring, to set the desired mode.  
STOP . . . . . . Stays in stop mode  
REC . . . . . . . Goes into recording mode  
œ If in the (SET UP 3) menu “TAPE IN MODE” is set to  
“REC”, the recording indicator “m” will light during the  
while the tape thread is checked. However, recording  
will only start after the tape thread check is completed.  
To cancel recording, press the STOP button.  
4 Press the SEARCH button to save the setting.  
1 Press the MENU button until the (SET UP 4) menu is  
displayed.  
@@@@@@@@<SET@UP@4>  
öSW@OUT  
@@FIELD@@@@@@@@@01  
@@TIMING@@@@@@@@FIELD  
@@8H@@@@@@@@@@@@Y  
öTHREAD@CHECK@@@Y  
öVIDEO@LOSS@@@@@N  
öREC@SPEED@@@@@@N  
öEJECT@SET  
@@EJECT@MODE@@@@EJECT1  
@@OPERATION@@@@@SLAVE  
2 Turn the JOG dial, until the “THREAD CHECK”  
setting is flashing.  
3 Turn the SHUTTLE ring, to set the desired mode.  
Y . . . . . . . . . The correct tape thread check  
function is on  
N . . . . . . . . . The correct tape thread check  
function is off  
4 Press the SEARCH button to save the setting.  
12  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NORMAL RECORDING  
Normal Recording  
[Recording Speed Mode]  
(When the TAPE SELECT switch is set to “T-160”)  
Before starting  
Recording  
Maximum  
recording  
Recording  
interval  
speed mode  
Audio recording Tape motion  
œ Turn the power on to all devices used.  
(hour mode) duration (hours) (second)  
8
24  
40  
64  
96  
8
24  
1/60  
3/60  
œ Load a cassette tape with erasure-prevention tab.  
Possible  
Continuous  
Intermittent  
40  
5/60  
NOTE:  
72  
9/60  
Not possible  
œ If in the (SET UP 3) menu, TAPE IN MODE is set  
to “REC”, recording will start after the tape thread  
has been checked.  
104  
13/60  
(When the TAPE SELECT switch is set to “T-120”)  
Recording  
Maximum  
recording  
Recording  
interval  
œ Set the ON SCREEN switch to the “ON” position.  
speed mode  
Audio recording Tape motion  
(hour mode) duration (hours) (second)  
œ Set the TAPE SELECT switch to the “T-120” or  
6
18  
30  
48  
72  
6
1/60  
3/60  
“T-160” position.  
18  
30  
54  
78  
Possible  
Continuous  
Intermittent  
5/60  
NOTE:  
9/60  
Not possible  
13/60  
œ Set the TAPE SELECT switch according to the  
duration of the tape used.  
NOTE:  
œ The tape speed display will vary according to the TAPE  
SELECT switch setting. In this manual, all the  
examples and displays used are for when the TAPE  
SELECT switch is set to “T-160”. If set to “T-120”,  
please refer to the table above for the corresponding  
durations and displays.  
1 Press the REC/PLAY SPEED l (or j) button to set  
the recording speed mode.  
ø The recording speed mode is displayed  
on-screen and on the digital display.  
2 Press the REC button.  
ø The record indicator mlight.  
ø Recording starts.  
For example, if the recording speed mode is “8”, then  
the corresponding recording speed when set to “T-120”  
will be “6”. And, the counter reading of 7 57 00 will  
H
M
S
be 5 57 00 when set to “T-120”.  
H
M
S
ø When the end of the tape is reached, “OFF” will  
be displayed.  
Record Pause  
Recording can be interrupted temporarily.  
NOTES:  
œ If in the (SET UP 2) menu, in the BUZZER section  
TAPE END is set to “Y”, the buzzer will be heard  
as long as “OFF” is displayed on the digital display.  
1 Press the STILL/PAUSE button during recording.  
ø The Pause/Still indicator “Nblinks.  
œ To cancel the “OFF” display, press the STOP,  
EJECT or PLAY button or turn the SHUTTLE ring.  
NOTES:  
œ The image appears on-screen but it is not recorded.  
œ If recording stops due to a problem with the tape or  
other reason, the unit will try once to resume  
recording. If the tape still does not advance, the  
VCR will go into stop mode.  
œ If a recording pause continues for 5 minutes or  
more, the VCR will go into stop mode to avoid  
damaging the tape.  
2 To resume recording, press the REC button, or press  
the STILL/PAUSE button again.  
3 To stop recording, press the STOP button.  
NOTES:  
œ A tape recording made on this VCR may not play back  
with the same degree of clarity on a time lapse from  
another manufacturer.  
œ If you press on the REC button and the loaded  
cassette has no erasure-prevention tab, the VCR will  
eject the cassette.  
English  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NORMAL RECORDING  
Concerning the Number of Times Tapes  
can be Rerecorded on  
Changes to the Recording Speed Mode  
During Recording  
Depending on the recording speed mode, the tape must  
be replaced after a certain number of recording times.  
It is possible to permit or prevent changing the recording  
speed mode during recording.  
Refer to the table below for the maximum number of times  
a tape can be recorded on.  
1 Press the MENU button until the (SET UP 4) menu is  
displayed.  
@@@@@@@<SET@UP@4>  
öSW@OUT  
Recording speed mode  
(hour mode)  
Maximum number of  
recording times  
(with a standard grade  
tape)  
@@FIELD@@@@@@@@@01  
@@TIMING@@@@@@@@FIELD  
@@8H@@@@@@@@@@@@Y  
öTHREAD@CHECK@@@Y  
öVIDEO@LOSS@@@@@N  
öREC@SPEED@@@@@@N  
öEJECT@SET  
@@EJECT@MODE@@@@EJECT1  
@@OPERATION@@@@@SLAVE  
6, 8  
100  
50  
50  
25  
10  
18, 24  
30, 40  
48, 64  
72, 96  
2 Turn the JOG dial, until the “REC SPEED” setting is  
flashing.  
3 Turn the SHUTTLE ring, to set the desired mode.  
Y. . . . . . . . . . Recording speed mode can be  
changed  
NOTES:  
N. . . . . . . . . . Recording speed mode can not be  
changed  
œ The maximum number of recording times will vary  
depending on the location and kind of tape used. Verify  
the recording quality and replace the tape when the  
quality starts to deteriorate.  
4 Press the SEARCH button to save the setting.  
The maximum number of recording times indicated  
above are based on test tapes (T-120 and T-160) used  
by the company.  
Action to Take when the Video Signal  
Deteriorates  
If there is no video signal during recording, fast forward,  
rewind modes, when in stop mode or when a tape is not  
loaded the menus are not displayed, “VIDEO LOSS” can  
be displayed on-screen and a signal (0 V) can be output  
at the ALARM OUT terminal. If in the (SET UP 2) menu,  
in the BUZZER section WARNING is set to “Y”, the  
buzzer will be heard. To stop the buzzer, press the STOP  
button.  
œ If using longer tapes (i.e. T-180) the tape travel will not  
be as stable and that may cause problems.  
1 Press the MENU button until the (SET UP 4) menu is  
displayed.  
2 Turn the JOG dial, until the “VIDEO LOSS” setting is  
flashing.  
3 Turn the SHUTTLE ring, to set the desired mode.  
N. . . . . . . . . . The video loss warning is not  
active.  
Y. . . . . . . . . . The video loss warning is active.  
4 Press the SEARCH button to save the setting.  
14  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NORMAL RECORDING  
Recording Check  
The image being recorded can be checked.  
1 During recording, press the PLAY (REC CHECK)  
button.  
ø The tape will be rewound and then played back.  
The VCR will then return to the previous  
recording mode.  
NOTE:  
œ During recording check operations, recording is  
suspended momentarily.  
Clog Detection  
This VCR is equipped with a clog detection function.  
The recording quality is monitored automatically. When  
the heads are dirty and the recording quality deteriorates,  
the output at the WARNING OUT terminal becomes 0V  
(Low), the “m” indicator flashes on the digital display, and  
the buzzer sounds.  
If in the (SET UP 3) menu, CLOG DETECT. is set to “N”,  
the recording quality is not monitored.  
NOTES:  
œ To cancel the “m” indicator display and reset the  
WARNING OUT terminal output, press the STOP  
button.  
œ Clog detection is not possible if recording in 8-hour  
mode.  
English  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AUTOREPEAT RECORDING  
Autorepeat Recording  
Setting the Mode at the End of the Tape  
The same tape can be recorded over many times.  
In the (SET UP 3) menu, you can set the mode of the  
VCR mode when the tape reaches the end during  
recording.  
œ Follow the Before starting steps, under “NORMAL  
RECORDING”.  
1 Press the MENU button until the (SET UP 3) menu is  
1 Set the REPEAT REC switch to the “ON” position.  
ø The REPEAT indicator will light.  
displayed.  
@@@@@@@<SET@UP@3>  
öALARM@MODE@@@@@@@Y1  
öALARM@DURATION@@@20S  
öVERTICAL@SYNC@@@@Y  
öEXT@TIME@ADJ.@@@@01:00  
öTAPE@IN@MODE@@@@@STOP  
öTAPE@END@MODE@@@@REW  
öTAPE@END@OUT@@@@@-3M  
öCLOG@DETECT.@@@@@Y  
öSERIES@REC@IN@@@@N  
öRS-232C@@@@@@@@@@19200  
2 Press the MENU button until the (SET UP 3) menu is  
displayed.  
ø The “ALARM MODE” setting is flashing.  
@@@@@@@<SET@UP@3>  
öALARM@MODE@@@@@@@Y1  
öALARM@DURATION@@@20S  
öVERTICAL@SYNC@@@@Y  
öEXT@TIME@ADJ.@@@@01:00  
öTAPE@IN@MODE@@@@@STOP  
öTAPE@END@MODE@@@@R1  
öTAPE@END@OUT@@@@@-3M  
öCLOG@DETECT.@@@@@Y  
öSERIES@REC@IN@@@@N  
öRS-232C@@@@@@@@@@19200  
2 Turn the JOG dial, until the “TAPE END MODE”  
setting is flashing.  
3 Turn the SHUTTLE ring, to set the desired mode.  
œ Setting when the REPEAT REC switch is set to the  
3 Turn the JOG dial, until the “TAPE END MODE”  
“OFF” position.  
setting is flashing.  
REW. . . . . . . Rewinds the tape to the beginning,  
then goes to stop mode  
4 Turn the SHUTTLE ring to set to “R 1” or “R 2”. (See  
“Setting the Mode at the End of the Tape”)  
STOP . . . . . . Goes to stop mode  
5 Press the SEARCH button to save the setting.  
ø The setting procedure is now completed.  
EJECT . . . . . The cassette is ejected  
œ Setting when the REPEAT REC switch is set to the  
“ON” position.  
6 Press the REC/PLAY SPEED l (or j) button to set  
the recording speed mode.  
R1. . . . . . . . . Autorepeat recording mode is  
automatically canceled if there was  
an alarm trigger  
7 Press the REC button.  
ø Recording will start. When the tape end is  
reached, the VCR will rewind it to the beginning,  
and recording will resume.  
R2. . . . . . . . . Autorepeat recording mode is  
active even if there was an alarm  
trigger  
ø When the end of the tape is reached, a buzzer  
will be heard (if in the (SETUP 2) menu, in the  
BUZZER section TAPE END is set to “Y”) and  
“OFF” will be displayed until the rewinding  
operation starts.  
4 Press the SEARCH button to save the setting.  
NOTES:  
œ If during autorepeat recording there is an alarm trigger,  
“AL” is displayed on the digital display and alarm  
recording will take place. (Please refer to page 17,  
“ALARM RECORDING”.)  
œ If the “TAPE END MODE” setting is R 1, the REPEAT  
indicator will go off if there is an alarm trigger. The  
recording will continue to the end of the tape then it will  
be rewound to the beginning and stop. “OFF” will be  
displayed on the digital display. To turn off the buzzer  
(if in the (SETUP 2) menu, in the BUZZER section  
TAPE END is set to “Y”) and the “OFF” display, press  
the STOP, EJECT or PLAY button, or turn the  
SHUTTLE ring.  
œ If “AL” is displayed on the digital display and the “TAPE  
END MODE” setting is R1, autorepeat recording is not  
possible.  
16  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ALARM RECORDING  
By connecting the ALARM IN terminal to a door switch,  
an interphone, etc., a recording can be done only when  
necessary.  
If the ALARM DURATION switch is set to the “PROG.”  
position, please continue with steps 5 and 6.  
5 Turn the JOG dial, until the “ALARM DURATION”  
setting is flashing.  
Alarm Recording Setting  
Alarm recording is performed when there is an input  
(trigger) at the ALARM IN terminal, “AL” is displayed on  
the digital display.  
6 Turn the SHUTTLE ring, to select the desired alarm  
recording duration (20S, 40S, 1M, 2M, 3M, 4M, 5M,  
or CC).  
20S-5M. . Recording only for the displayed duration  
œ Make all necessary connections.  
CC . . . . . Recording as long as the alarm signal is  
being input (minimum 5 seconds)  
œ Follow the Before starting steps, under “NORMAL  
RECORDING”.  
7 Press the SEARCH button to save the settings.  
ø The setting procedure is now completed.  
1 Set the ALARM SPEED switch to the desired  
recording speed.  
8H . . . . . 8-hour mode recording  
NOTES:  
24H . . . . 24-hour mode recording  
NC . . . . . Recording at the speed already set  
œ During alarm recording all buttons are disabled.  
œ If “OFF” is displayed on the digital display, alarm  
recording is not possible in order to prevent the  
recorded tape to be recorded over.  
2 Set the ALARM DURATION switch to the desired  
recording duration.  
To cancel the “OFF” display, press the STOP, EJECT  
or PLAY button or turn the SHUTTLE ring.  
20S. . . . . 20-second recording  
PROG. . . Recording for the duration set for the  
“ALARM DURATION” item in the (SET  
UP 3) menu.  
œ If an alarm trigger is received while alarm recording is  
in progress, recording duration for the second alarm  
will be calculated from that point. The alarm counter  
will register the alarm, but it will not be found during an  
alarm scan and alarm search.  
CC . . . . . Recording as long as the alarm signal is  
being input (minimum 5 seconds)  
œ If there is a power failure during alarm recording, and  
the power is restored within the recording set duration,  
alarm recording will continue.  
3 Press the MENU button until the (SET UP 3) menu is  
displayed.  
@@@@@@@<SET@UP@3>  
öALARM@MODE@@@@@@@Y1  
öALARM@DURATION@@@20S  
öVERTICAL@SYNC@@@@Y  
öEXT@TIME@ADJ.@@@@01:00  
öTAPE@IN@MODE@@@@@STOP  
öTAPE@END@MODE@@@@REW  
öTAPE@END@OUT@@@@@-3M  
öCLOG@DETECT.@@@@@Y  
öSERIES@REC@IN@@@@N  
öRS-232C@@@@@@@@@@19200  
œ If the alarm recording duration is short, the alarms may  
not be found during an alarm scan or an alarm search.  
If the alarms are going to be reviewed using alarm  
scan or alarm search, then in 8-hour mode, 20-second  
or more recording duration should be used.  
œ To do alarm recording during series recording, set  
“ALARM MODE” to “Y1” or “Y3”. Alarm recording will  
be conducted only if the VCR is recording.  
4 Turn the SHUTTLE ring to set the desired alarm  
mode.  
Y1. . . . . . Alarm recording is done when there is an  
alarm trigger.  
Y2. . . . . . Alarm recording is done only when there  
is an alarm trigger during programmed  
timer recording.  
Y3. . . . . . Alarm recording is done only if there is  
an alarm trigger and the VCR is not in  
programmed timer recording mode.  
Y4. . . . . . Alarm recording is done only when there  
is an alarm trigger during programmed  
timer recording duration. Timer recording  
is not possible.  
N . . . . . . Alarm recording is not performed even if  
there is an alarm trigger.  
English  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ALARM RECORDING  
Alarm Recording Counter Display  
Checking the Alarm Recordings Time  
œ During alarm recording, “AL” will be flashing on the  
1 Press the MENU button until the (ALARM TIME)  
digital display.  
menu is displayed.  
œ If the ON SCREEN switch is set to the “ON” position,  
ø The number of alarm recordings, and the 8 most  
the number of alarms will flash on the monitor screen.  
recent alarm recording times are displayed.  
œ The maximum display number of alarm recordings is  
“999”, at the next alarm recording the counter will  
indicate “000”.  
@@@@@@<ALARM@TIME>  
@@@@008@12-25@19:00  
@@@@@@@@11-25@23:00  
@@@@@@@@11-25@15:00  
@@@@@@@@10-25@08:00  
@@@@@@@@10-25@06:00  
@@@@@@@@09-25@20:00  
@@@@@@@@09-25@16:35  
@@@@@@@@09-25@10:52  
œ When the (ALARM TIME) menu is displayed, press the  
MENU RESET button to reset the alarm counter to  
“000” (all the data of the (ALARM TIME) menu is reset).  
NOTE:  
Connections to the ALARM IN/OUT  
Terminals  
œ The data for the previous alarm recordings is  
erased.  
œ Alarm input signal  
2 Press the SEARCH button, the normal screen is  
Connect a make-contact (no voltage) switch between  
the ALARM IN and COM terminals.  
displayed.  
NOTE:  
œ Alarm output signal  
Normally DC 5V are output between the ALARM OUT  
and the COM terminals. When an alarm input (trigger)  
is received and the unit is recording, the output falls to  
0V. Once the alarm recording is over, the output  
returns to DC 5V.  
œ If the MENU RESET button is pressed while the  
(ALARM TIME) menu is displayed, the displayed data  
is erased. “AL” will be erased from the digital display.  
18  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ALARM RECORDING  
Alarm Search  
Alarm Scan  
To go to the beginning of a desired alarm recording.  
To look for an alarm recording by viewing the first 5  
seconds of each alarm recording.  
1 Press the SEARCH button during stop mode.  
ø “AL SEARCH 01” will be displayed on screen.  
1 Press the SEARCH button twice during stop mode.  
ø “AL SCAN” will be displayed on screen.  
2 Press the REC/PLAY SPEED l (or j) button to set  
the desired alarm number (1 to 99), then turn the  
SHUTTLE ring clockwise (or counterclockwise).  
2 Turn the SHUTTLE ring clockwise (or  
counterclockwise).  
ø The desired alarm is searched and a still image  
of the beginning of the alarm recording will  
appear on-screen.  
ø The unit will advance (or rewind) the tape at high  
speed and playback the first 5 seconds of every  
alarm recording.  
ø To cancel the alarm scan mode, press the STOP  
button.  
NOTE:  
œ The alarm number is relative to the actual tape  
3 While the desired recording is being played back,  
press the PLAY button.  
position. (Please refer to the illustration below.)  
Playback  
ø Playback will start, alarm scan mode is cancelled.  
1
1
2
Alarm number 2  
Alarm trigger input point  
Rewind direction  
Fast-forward direction  
Actual position  
3 Press the PLAY button.  
ø Playback will start.  
English  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PROGRAM TIMER RECORDING  
There are two program timer recording methods, daily  
recording or recording on certain days of the week.  
7 Turn the SHUTTLE ring to set the recording stop  
minutes (ex: 00), then turn the JOG dial clockwise.  
ø The “SPD” (recording speed) position will start  
Example 1: To record on every Saturday from 9:00  
AM to 5:00 PM (17:00), in 24-hour  
flashing.  
mode (recording speed).  
NOTE:  
œ Follow the Before starting steps, under “NORMAL  
œ If the set stop time is earlier than or the same time  
as the set start time, the VCR will consider the stop  
time to be the following day, and “T” will be  
displayed next to the recording stop time.  
RECORDING”.  
1 Press the MENU button until the (TIMER SET) menu  
is displayed.  
8 Turn the SHUTTLE ring to select the recording speed  
mode (ex: 24), then turn the JOG dial clockwise.  
œ “SUN” (Sunday) will be flashing.  
@@@@@@<TIMER@SET>  
WEEK@START@@STOP@@@SPD  
SUN@@--:--@@--:--@@---@N  
MON@@--:--@@--:--@@---@N  
TUE@@--:--@@--:--@@---@N  
WED@@--:--@@--:--@@---@N  
THU@@--:--@@--:--@@---@N  
FRI@@--:--@@--:--@@---@N  
SAT@@--:--@@--:--@@---@N  
DLY@@--:--@@--:--@@---@N  
EXT@@ööööö@@ööööö@@---@N  
ø “N” will start flashing.  
9 Turn the SHUTTLE ring to select the desired program  
timer recording mode.  
Y. . . . . . . . . . recording will take place  
N. . . . . . . . . . recording will not take place  
2 Turn the JOG dial, until “SAT” (Saturday) is flashing.  
@@@@@@<TIMER@SET>  
WEEK@START@@STOP@@@SPD  
SUN@@--:--@@--:--@@---@N  
MON@@--:--@@--:--@@---@N  
TUE@@--:--@@--:--@@---@N  
WED@@--:--@@--:--@@---@N  
THU@@--:--@@--:--@@---@N  
FRI@@--:--@@--:--@@---@N  
SAT@@09:00@@17:00@@@24@Y  
DLY@@--:--@@--:--@@---@N  
EXT@@ööööö@@ööööö@@---@N  
3 Turn the JOG dial clockwise.  
ø The recording start hour position starts flashing.  
4 Turn the SHUTTLE ring to set the recording start hour  
(ex: 09), then turn the JOG dial clockwise.  
ø The recording start minutes position starts  
ø Repeat steps 2 to 9 to program timer  
flashing.  
recordings for other days of the week.  
5 Turn the SHUTTLE ring to set the recording start  
minutes (ex: 00), then turn the JOG dial clockwise.  
F Press the SEARCH button to save the settings.  
G Press the TIMER button.  
ø The recording stop hour position starts flashing.  
ø The timer recording indicator nwill light on the  
digital display, the VCR is now in timer recording  
stand-by mode.  
6 Turn the SHUTTLE ring to set the recording stop hour  
(ex: 17), then turn the JOG dial clockwise.  
ø The recording stop minutes position starts  
NOTES:  
flashing.  
œ To modify, cancel or stop timer recording, press  
the TIMER button to cancel the timer recording  
mode.  
œ To record everyday at the same time, at step 2  
select the “DLY” line.  
20  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PROGRAM TIMER RECORDING  
A timer recording of more than 24 hours can only be set  
on the 7th (SAT) and 8th (DLY) lines of the (TIMER SET)  
menu.  
8 Turn the SHUTTLE ring, to set the desired stop day  
of the week (ex: MON), then turn the JOG dial  
clockwise.  
ø The recording stop hour position starts flashing.  
Example 2: To record every week from Saturday at  
9:00 PM (21:00) to Monday at 7:00 AM, in  
40-hour mode (recording speed).  
9 Turn the SHUTTLE ring to set the recording stop hour  
(ex: 07), then turn the JOG dial clockwise.  
ø The recording stop minutes position starts  
flashing.  
œ Follow the Before starting steps, under “NORMAL  
RECORDING”.  
F Turn the SHUTTLE ring to set the recording stop  
minutes (ex: 00), then turn the JOG dial clockwise.  
1 Press the MENU button until the (TIMER SET) menu  
is displayed.  
ø The “SPD” (recording speed) position will start  
flashing.  
œ “SUN” (Sunday) will be flashing.  
2 Turn the JOG dial, until “SAT” is flashing.  
G Turn the SHUTTLE ring to select the recording speed  
mode (ex: 40), then turn the JOG dial clockwise.  
3 Turn the SHUTTLE ring to set the desired start day of  
the week (ex: SAT), then turn the JOG dial clockwise.  
ø “N” will start flashing.  
ø The recording start hour position starts flashing.  
H Turn the SHUTTLE ring to select “Y”.  
@@@@@@<TIMER@SET>  
4 Turn the SHUTTLE ring to set the recording start hour  
(ex: 21), then turn the JOG dial clockwise.  
WEEK@START@@STOP@@@SPD  
SUN@@--:--@@--:--@@---@N  
MON@@--:--@@--:--@@---@N  
TUE@@--:--@@--:--@@---@N  
WED@@--:--@@--:--@@---@N  
THU@@--:--@@--:--@@---@N  
FRI@@--:--@@--:--@@---@N  
SAT@@21:00@@öö:öö@@ööö@ö  
MON@@öö:öö@@07:00@@@40@Y  
EXT@@ööööö@@ööööö@@---@N  
ø The recording start minutes position starts  
flashing.  
5 Turn the SHUTTLE ring to set the recording start  
minutes (ex: 00), then turn the JOG dial clockwise.  
I Follow steps F and G under “PROGRAM TIMER  
ø The recording stop hour position starts flashing.  
RECORDING” on page 20.  
6 Turn the SHUTTLE ring to set “öö” for the recording  
stop hour.  
ø The rest of the line settings will change to  
öö:öö ööö ö, the day of the next line will  
change to the next day and the start time will  
change to öö:ööautomatically.  
7 Turn the JOG dial clockwise.  
ø The day of the week of the 8th line is flashing.  
English  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PROGRAM TIMER RECORDING  
Setting the Holidays  
Changing a Program Timer Recording  
By setting the holidays, timer recording will be conducted  
on those days, as set for Sundays.  
1 Press the MENU button until the (TIMER SET) menu  
is displayed.  
1 Press the MENU button until the (HOLIDAY SET)  
2 Turn the JOG dial, until the setting to correct is  
menu is displayed.  
flashing.  
@@@@@<HOLIDAY@SET>  
3 Turn the SHUTTLE ring, to correct the setting.  
4 Press the SEARCH button to save the settings.  
5 Press the TIMER button.  
@@1@@-----@@@11@@-----  
@@2@@-----@@@12@@-----  
@@3@@-----@@@13@@-----  
@@4@@-----@@@14@@-----  
@@5@@-----@@@15@@-----  
@@6@@-----@@@16@@-----  
@@7@@-----@@@17@@-----  
@@8@@-----@@@18@@-----  
@@9@@-----@@@19@@-----  
@10@@-----@@@20@@-----  
To Cancel a Program Timer Recording  
2 Turn the SHUTTLE ring to set the month of the  
holiday, then turn the JOG dial clockwise.  
1 Press the MENU button until the (TIMER SET) menu  
is displayed.  
3 Turn the SHUTTLE ring to set the day of the holiday.  
2 Turn the JOG dial, until the “Y” corresponding to the  
4 Turn the JOG dial, until the next line to set starts  
timer recording to cancel is flashing.  
flashing.  
3 Turn the SHUTTLE ring, to select “N”.  
4 Press the SEARCH button to save the settings.  
5 Press the TIMER button.  
ø Repeat steps 2 to 4 to set up to 20 holidays.  
5 Press the SEARCH button to save the settings.  
ø The setting procedure is now completed.  
NOTE:  
To Cancel all Program Timer Recordings  
œ If setting holidays, be sure that a timer recording is set  
1 Press the MENU button until the (TIMER SET) menu  
for Sunday. If not, this function will not operate.  
is displayed.  
œ If a timer recording for Sundays is entered, the holidays  
timer recording will not function if the program timer  
recording mode is set to “N”.  
2 Press the MENU RESET button.  
ø All programmed timer recordings are erased.  
œ To erase a setting, follow the same procedure as  
above, but at step 2 and 3, enter “--” instead of a  
setting.  
3 Press the SEARCH button, the normal screen is  
displayed.  
22  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PROGRAM TIMER RECORDING  
NOTES:  
œ During timer recording or timer recording stand-by, all  
the buttons on the VCR, except the TIMER button and  
the buttons to set/cancel the security lock (see page  
30), are disabled.  
œ If the power fails, the recording will be interrupted.  
When the power is restored, the recording will resume  
if the stop time has not yet been reached, and “P” will  
be displayed on the digital display. The VCR internal  
battery is completely recharged after the VCR has  
been connected to a live outlet for 48 hours, and it will  
maintain all the VCR settings memory for up to 30 days.  
œ Set the timer recordings so that the recording times do  
not overlap. If they do, the one with the earliest  
recording start time will have priority. (See chart below.)  
7:00PM  
8:00PM  
9:00PM  
10:00PM  
Program 1  
Program 2  
Program 3  
These portions will  
not be recorded  
œ To set two or more timer recordings for a same day of  
the week, turn the JOG dial, until the day of the week  
for the second recording is flashing, then turn the  
SHUTTLE ring, to set the desired day of the week.  
œ If no timer recording is set or a cassette without  
erasure-prevention tab is loaded, when the TIMER  
button is pressed the timer recording indicator “n” will  
start flashing and a buzzer will be heard.  
œ If “OFF” is displayed on the digital display, timer  
recording is not possible in order to prevent the  
recorded tape to be recorded over.  
English  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RECORDING USING AN EXTERNAL TIMER  
INPUT  
Recording can be controlled by an external start/stop  
signal input at the EXT TIMER IN terminal.  
5 Follow steps F and G under “PROGRAM TIMER  
RECORDING on page 20”.  
ø When an external signal is input, “E” will light on  
Example 3: To record using the signal input at the  
EXT TIMER IN terminal, in 24-hour  
mode.  
the digital display and recording will take place.  
NOTES:  
œ Other timer recordings using the standard procedure  
œ Follow the Before starting steps, under “NORMAL  
can also be programmed.  
RECORDING”.  
œ The external input signal must be input at the EXT  
TIMER IN terminal.  
NOTE:  
œ External timer input recording can only be set on the  
9th line (EXT) of the (TIMER SET) menu.  
1 Press the MENU button until the (TIMER SET) menu  
is displayed.  
2 Turn the JOG dial, until “EXT” (External) setting is  
flashing.  
ø The “SPD” (recording speed) position will start  
flashing.  
3 Turn the SHUTTLE ring to select the recording speed  
mode (ex: 24), then turn the JOG dial clockwise.  
ø “N” will start flashing.  
4 Turn the SHUTTLE ring to select “Y”.  
@@@@@@<TIMER@SET>  
WEEK@START@@STOP@@@SPD  
SUN@@--:--@@--:--@@---@N  
MON@@--:--@@--:--@@---@N  
TUE@@--:--@@--:--@@---@N  
WED@@--:--@@--:--@@---@N  
THU@@--:--@@--:--@@---@N  
FRI@@--:--@@--:--@@---@N  
SAT@@--:--@@--:--@@---@N  
DLY@@--:--@@--:--@@---@N  
EXT@@ööööö@@ööööö@@@24@Y  
24  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SERIES RECORDING  
Using 2 VCRs or more, the series recording function lets  
you switch recording from one unit to the next (only with  
VCRs of the same model as this one).  
The SERIES OUT signal will be presence either at the  
point when the counter reading is 7 57 00 or when  
VCR No. 1 reaches the end of the tape, whichever is first.  
The signal will stop 70 seconds after the tape end point of  
VCR No. 1.  
H
M
S
Series Recording Setup  
œ Connect 2 VCRs or more as illustrated below.  
When this signal is received by VCR No. 2, it will start  
recording. During the period when the SERIES OUT  
signal is being received by VCR No. 2, if the STOP button  
of VCR No. 2 is accidentally pressed, VCR No. 2 will go  
into the stop mode for an instant and then return to the  
record mode.  
œ Set the TAPE SELECT switch according to the  
duration of the tape used.  
1 Press the REC/PLAY SPEED l (or j) button to set  
the recording speed mode.  
To prevent this form occuring, the security lock of VCR  
No. 2 should be set to the on condition.  
2 Set the following items as indicated.  
If TAPE END MODE is set to “REW”, when the end of the  
tape is reached “OFF” is displayed, the tape is rewound  
then stops.  
Item  
VCR No.1  
VCR No.2  
and on  
Cassette tape  
Loaded  
Stop  
Loaded  
Stop  
Operation mode  
REPEAT REC switch  
Counter memory  
NOTES:  
OFF  
OFF  
œ If the counter reading on VCR No.1 is 7 57 00 or  
H
M
S
Canceled  
Canceled  
more, when the REC button is pressed (step 3), the  
recording will start on VCR No.2.  
“OUTPUT” (in (SET UP  
1) menu)  
SERIES  
Y (YES)  
SERIES  
Y (YES)  
œ If in the (SET UP 3) menu “SERIES REC IN” is set to  
“N” and in the (SET UP 1) menu “OUTPUT” is set to  
“NON REC”, series recording will not be possible.  
“SERIES REC IN” (in  
(SET UP 3) menu)  
Timer recording  
Security lock  
OFF (not set) OFF (not set)  
Canceled Set  
œ The counter must start from the beginning of tape, or  
the series recording out will not function properly.  
œ Even if “OFF” is displayed, series recording will be  
conducted if there is an input at the SERIES IN  
terminal.  
3 Press the REC button on VCR No.1.  
ø Recording will start in series recording mode.  
4 Set the security lock on VCR No.1.  
Series recording connections  
Monitor TV  
Video camera  
To VIDEO OUT jack  
(VCR)  
To  
To  
VIDEO IN  
VIDEO IN  
VCR No.1  
VCR No.2  
jack  
jack  
EXT  
WARNING TAPE  
SW  
ALARM  
OUT  
EXT  
WARNING TAPE  
SW  
ALARM  
T
I
M
E
R
I
N
C
O
M
O
U
T
E
N
D
O
U
T
O
U
T
COM  
IN  
T
I
M
E
R
I
N
C
O
M
O
U
T
E
N
D
O
U
T
O
U
T
COM  
OUT  
IN  
IN  
A
RS485  
B
A
RS485  
B
CLOCK SET  
S
E
R
I
E
S
O
U
T
/
S
E
R
I
E
S
TIMER  
OUT  
EJECT  
CLOCK SET  
S
E
R
I
E
S
O
U
T
.
S
E
R
I
E
S
TIMER  
OUT  
EJECT  
OUT  
OUT  
IN  
NON REC OUT  
IN  
COM  
OUT  
IN  
OUT  
IN  
NON REC OUT  
IN  
COM  
ADDRESS  
ON  
TERMINATE  
ON  
ADDRESS  
ON  
TERMINATE  
ON  
485  
485  
PUSH  
OPEN  
PUSH  
OPEN  
OFF  
OFF  
OFF  
OFF  
232  
232  
AUDIO  
IN OUT  
VIDEO  
AUDIO  
IN OUT  
VIDEO  
IN  
OUT  
IN  
OUT  
REMOTE MIC IN  
REMOTE MIC IN  
AC IN  
~
AC IN  
~
RS232C  
RS232C  
To  
SERIES OUT  
terminal  
To  
To  
VIDEO OUT  
jack  
VIDEO OUT  
jack  
To  
SERIES IN  
terminal  
To  
To  
To COM  
terminal  
SERIES OUT  
terminal  
VIDEO IN  
jack  
(VCR No. 3)  
To COM  
terminal  
To COM terminal  
(VCR No. 3)  
To SERIES IN terminal  
(VCR No. 3)  
English  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SERIES RECORDING  
Continous Loop Recording Setup  
3 Press the REC button on VCR No.1.  
It is possible to configure at least two this VCR for  
continous loop recording.  
ø Recording will start in series recording mode.  
4 Set the security lock on VCR No.1.  
Under loop recording when the recording finishes on the  
first unit, the new recording will start on the second unit.  
When the recording finishes on the second unit, recording  
will start on the first unit.  
NOTES:  
œ The “TAPE END MODE” in (SET UP 3) menu should  
be set to “REW” for both units without fail.  
œ The SERIES OUT terminal of VCR No.2 and the  
SERIES IN terminal No.1 should be connected (See  
diagram).  
œ In loop recording mode, the tape will be re-recorded  
over. If you need to keep the recorded infomation,  
please eject the tape after recording is complete and  
insert a new tape.  
œ Set the TAPE SELECT switch according to the  
duration of the tape used.  
1 Press the REC/PLAY SPEED l (or j) button to set  
the recording speed mode.  
2 Set the following items as indicated.  
Item  
VCR No.1  
Loaded  
Stop  
VCR No.2  
Loaded  
Stop  
Cassette tape  
Operation mode  
REPEAT REC switch  
Counter memory  
OFF  
OFF  
Canceled  
Canceled  
“OUTPUT” (in (SET UP  
1) menu)  
SERIES  
REW  
SERIES  
REW  
“TAPE END MODE” (in  
(SET UP 3) menu)  
“SERIES REC IN” (in  
(SET UP 3) menu)  
Y (YES)  
Y (YES)  
Timer recording  
Security lock  
OFF (not set) OFF (not set)  
Canceled Set  
Loop recording connection (example with 2 VCRs)  
Monitor TV  
Video camera  
To VIDEO IN jack  
To  
To  
VIDEO OUT  
VIDEO IN  
VCR No.1  
VCR No.2  
jack  
jack  
EXT  
WARNING TAPE  
SW  
ALARM  
OUT  
EXT  
WARNING TAPE  
SW  
ALARM  
OUT  
T
I
M
E
R
I
N
C
O
M
O
U
T
E
N
D
O
U
T
O
U
T
COM  
IN  
T
I
M
E
R
I
N
C
O
M
O
U
T
E
N
D
O
U
T
O
U
T
COM  
IN  
IN  
A
RS485  
B
A
RS485  
B
CLOCK SET  
S
E
R
I
E
S
O
U
T
/
S
E
R
I
E
S
TIMER  
OUT  
EJECT  
CLOCK SET  
S
E
R
I
E
S
O
U
T
/
S
E
R
I
E
S
TIMER  
OUT  
EJECT  
OUT  
OUT  
IN  
NON REC OUT  
IN  
COM  
OUT  
IN  
OUT  
IN  
NON REC OUT  
IN  
COM  
ADDRESS  
ON  
TERMINATE  
ON  
ADDRESS  
ON  
TERMINATE  
ON  
485  
485  
PUSH  
OPEN  
PUSH  
OPEN  
OFF  
OFF  
OFF  
OFF  
232  
232  
AUDIO  
IN OUT  
VIDEO  
AUDI
IN OUT  
VIDEO  
IN  
OUT  
IN  
OUT  
REMOTE MIC IN  
REMOTE MIC IN  
AC IN  
~
AC IN  
~
RS232C  
RS232C  
To  
To  
SERIES OUT  
terminal  
To COM  
terminal  
SERIES OUT  
terminal  
To  
VIDEO OUT  
jack  
To  
SERIES IN  
terminal  
To  
SERIES IN  
terminal  
To COM  
terminal  
26  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NORMAL PLAYBACK  
Normal Playback  
Tracking Control  
If there is noise in the image during playback,  
1 Turn on the power to the VCR and TV monitor.  
2 Load the video cassette tape.  
1 While looking at the playback picture, press and hold  
the TRACKING/V. STILL+ button to minimize the  
noise.  
3 Press the REC/PLAY SPEED l (or j) button to  
select the playback speed mode.  
2 If it cannot be minimized, press the TRACKING/V.  
STILL– button.  
ø The selected playback speed mode is displayed  
on the digital display.  
NOTE:  
Vertical Lock Control  
During still image mode,  
œ A slow motion effect or accelerated playback effect  
can be achieved by using a slower or faster  
playback speed than the speed used for recording.  
1 Press and hold the TRACKING/V. STILL+ button to  
reduce the vertical rolling of the image.  
4 Press the PLAY button.  
ø Playback starts.  
2 If it cannot be corrected, press the TRACKING/V.  
STILL– button.  
ø If necessary, adjust the tracking to eliminate the  
noise from the picture.  
Sharpness Control  
ø If the image is unstable (rolling vertically), adjust  
Turn the SHARPNESS control clockwise or  
the vertical lock control to correct.  
counterclockwise for the desired sharpness of the image.  
5 To stop playback, press the STOP button.  
ø To advance or rewind the tape, turn the  
Audio Playback  
SHUTTLE ring clockwise or counterclockwise.  
œ Audio playback is only possible in 8-hour, 24-hour and  
40-hour modes. (When the TAPE SELECT switch is  
set to “T-120”, in 6-hour, 18-hour and 30-hour modes.)  
NOTES:  
œ If a tape recorded in SP mode on a standard VCR is  
loaded, playback will be done in 2-hour mode.  
œ The playback speed has to be the same as the  
recording speed, for normal playback of the audio.  
œ This real time video recorder can playback recordings  
made on a time lapse VCR from the same  
manufacturer.  
œ A tape recorded on a time lapse VCR produced by  
another manufacturer may not play back with the same  
degree of clarity on this unit.  
œ When used with a multiplexer in 24- or 40-hour mode  
playback (or when the TAPE SELECT switch is set to  
“T-120”, in 18- or 30-hour mode playback), the image  
may roll vertically. In such a case, in menu (SET UP 3)  
set “VERTICAL SYNC.” to “N”.  
English  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL PLAYBACK  
Picture Search (Forward and Reverse)  
Reverse Playback  
1 Turn the SHUTTLE ring clockwise (or  
counterclockwise), during normal playback. See  
“SHUTTLE Ring Operation”.  
1 Turn the SHUTTLE ring counterclockwise and hold it,  
during normal playback. See “SHUTTLE Ring  
Operation”.  
ø The image can be seen while the tape is  
ø Reverse playback will start.  
advanced (or rewound) at high speed.  
2 To return to normal playback, release the SHUTTLE  
2 To return to normal playback, release the SHUTTLE  
ring.  
ring.  
NOTES:  
NOTES:  
œ During reverse playback, noise will appear in the  
œ During picture search, noise (horizontal bars) will  
picture.  
appear in the picture.  
œ Reverse playback is only possible during 8-hour  
œ The sound is muted.  
playback speed mode.  
œ The sound is muted.  
Still Image  
Slow motion (Forward and Reverse)  
1 Press the STILL/PAUSE button, during normal  
playback.  
1 Turn the SHUTTLE ring clockwise (or  
counterclockwise) and hold it, during still image mode.  
See “SHUTTLE Ring Operation”.  
ø A still image can be viewed.  
2 To return to normal playback, press the PLAY button.  
ø Forward (or reverse) slow motion playback will  
start.  
NOTES:  
œ If still mode continues for 5 minutes or more, the VCR  
2 To return to normal playback, press the PLAY button.  
will go into stop mode to avoid damaging the tape.  
NOTES:  
œ If the image is unstable (rolling vertically), adjust the  
vertical lock control to correct.  
œ If slow motion mode continues for 5 minutes or more,  
the VCR will go into stop mode to avoid damaging the  
tape.  
Frame Advance  
œ The sound is muted.  
1 Turn the JOG dial clockwise (or counterclockwise),  
during still image mode.  
ø The still image is advanced (or rewound) of one  
image (field).  
ø Turn the dial faster to increase the speed of the  
frame advance.  
2 To return to normal playback, press the PLAY button.  
NOTES:  
œ During reverse frame advance, noise will appear in the  
picture.  
œ If frame advance mode continues for 5 minutes or  
more, the VCR will go into stop mode to avoid  
damaging the tape.  
28  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL PLAYBACK  
Day/Time Search  
SHUTTLE Ring Operation  
From normal playback, still image, stop mode, etc., turn  
the clockwise or counterclockwise to select a mode as  
indicated below.  
1 Press the SEARCH button three times during stop  
mode.  
ø “T/D SEARCH 01 00:00” will be displayed on  
screen.  
1 Turn the SHUTTLE ring in either direction where the  
desired mode is selected.  
1H22M33S  
T/D@SEARCH  
01@@00:00  
DAY@TIME  
: Operation will not return to the original mode when  
the SHUTTLE ring is released.  
Original  
mode  
Reverse direction  
Forward direction  
2 Press the REC/PLAY SPEED l (or j) button to set  
the desired day, then turn the JOG dial clockwise.  
*1  
Rewind  
Fast forward  
Reverse picture  
search (Locked)  
Forward picture  
search (Locked)  
*2  
3 Press the REC/PLAY SPEED l (or j) button to set  
the desired hour, then turn the JOG dial clockwise.  
Normal  
playback  
Reverse picture  
search  
Forward picture  
search  
Reverse playback  
Normal playback  
Reverse  
Reverse  
4 Press the REC/PLAY SPEED l (or j) button to set  
Still  
image  
Slow  
motion  
Normal  
playback  
Reverse picture  
search  
Forward picture  
search  
Slow  
playback  
motion  
the desired minutes.  
NOTES:  
œ The setting can be made in 10 minutes increments  
only.  
œ For recordings made on other VCRs, the exact  
time may not be found even if the minutes are  
entered. For tapes recorded on older models of  
VCRs produced by this company (the ones without  
a minutes setting for the day/time search function),  
make sure to set the minutes to “00”.  
*1: Stop mode, Forward picture search or Reverse picture  
5 Turn the SHUTTLE ring clockwise (or  
search.  
counterclockwise).  
*2: Fast forward or Rewind  
ø The desired day/time is searched and a still  
image of the recording will appear on-screen.  
NOTES:  
6 Press the PLAY button.  
ø Playback will start.  
œ If operated from still image mode and playback mode,  
operation will return to the original mode when the  
SHUTTLE ring is released.  
NOTES:  
œ If operated from normal playback mode, reverse  
playback is only possible during 8-hour playback speed  
mode.  
œ If during a search the end of the tape is reached, the  
tape will rewind and stop. If the beginning of the tape is  
reached, it will stop.  
œ The sound is muted.  
œ The alarm and day/time data are recorded on the tape  
in a similar format. If they overlap, the alarm data will  
have the priority. Therefore, when searching for a  
day/time when an alarm recording was done, the  
day/time search will not stop at the desired location. In  
such a case, use alarm scan to find the desired  
recording location.  
œ The day/time search function may not operate correctly  
if searching for a timer recording time or if the clock on  
the recording VCR has been adjusted using the  
CLOCK ADJUSTMENT function.  
œ Depending on the recording conditions, the function  
may not operate properly.  
English  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TAPE COUNTER  
Using the counter, it is easy to find a desired recording.  
NOTES:  
œ There is no tape counter indication for the blank  
1 Press the COUNTER RESET button, at the beginning  
portions of the tape.  
of the desired recording.  
œ In the 8-hour recording speed mode only, the tape  
ø The counter will be reset to “0H 00M 00S”.  
counter indicates real hours, minutes and seconds.  
2 Press the COUNTER MEMORY button.  
ø [is displayed on the digital display.  
œ In the other recording speed modes, the tape counter  
indication is a ratio of the 8-hour mode base indication.  
(In 64-hour recording mode, each “second” of the tape  
counter actually represents approximately 72/8 = 9 real  
seconds.)  
ø To cancel the counter memory function, press  
the COUNTER MEMORY button a second time.  
3 After recording or playback, turn the SHUTTLE ring  
œ There may be a slight discrepancy between the  
position shown on the tape counter and the actual tape  
position.  
counterclockwise from stop mode.  
ø The tape is rewound to the counter “0H 00M 00S”  
reading.  
œ When rewinding the tape past the “0 00 00 ”  
H
M
S
ø If you rewind the tape past the “0H 00M 00S”  
position, turn the SHUTTLE ring clockwise.  
position, a minus (–) sign will be displayed.  
SETTING THE SECURITY LOCK  
The security lock function is designed to prevent  
accidental stopping of recording if the STOP button is  
pressed inadvertently.  
NOTES:  
œ While the security lock is engaged all commands,  
except the one to cancel the security lock, are disabled.  
1 While holding the SHIFT « button, press the  
REC/PLAY SPEED j button.  
œ The security lock cannot be engaged while a menu is  
displayed.  
ø öis displayed on the digital display.  
To cancel the security lock, while holding the SHIFT  
« button, press the REC/PLAY SPEED l button, “ö”  
will be erased from the digital display.  
30  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETTING THE BUZZER  
During alarm recording, if the tape reaches the end, if  
buttons are pressed, or if there is a VCR mechanical  
failure, the tape will stop or be ejected and a buzzer can  
be sounded.  
TAPE END. . The buzzer will be heard when the  
end of the tape is reached during  
recording. To stop the buzzer,  
press the STOP, EJECT or PLAY  
button, or turn the SHUTTLE ring.  
1 Press the MENU button until the (SET UP 2) menu is  
KEY IN . . . . . The buzzer will be heard when one  
of the VCR buttons is pressed or  
when the JOG dial or the  
displayed.  
@@@@@@@<SET@UP@2>  
öDISPLAY  
@@@DATE@@@@@@@@@@@Y  
@@@TIME@@@@@@@@@@@Y  
@@@ALARM@COUNT@@@@Y  
@@@SPEED@@@@@@@@@@Y  
öBUZZER  
@@@ALARM@IN@@@@@@@Y  
@@@TAPE@END@@@@@@@Y  
@@@KEY@IN@@@@@@@@@N  
@@@WARNING@@@@@@@@Y  
SHUTTLE ring is turned.  
WARNING . . The buzzer will be heard if the  
heads are dirty and recording  
qualtiy deteriorate, or if the tape  
stops or is ejected due to a  
2 Turn the JOG dial, until the desired item for which the  
problem with the internal  
mechanism. To stop the buzzer,  
press the STOP button.  
buzzer function will be set is flashing.  
3 Turn the SHUTTLE ring to set “Y” for the functions  
described below.  
4 Press the SEARCH button to save the setting.  
ø The setting procedure is now completed.  
ALARM IN . . The buzzer will be heard during  
alarm recording.  
NOTES:  
œ If “N” is set, the buzzer will not be heard.  
œ During timer recording mode, security lock engaged  
mode and alarm recording mode, the buzzer will not be  
heard when a button related to one of these modes is  
pressed, even if “Y” is set for the “KEY IN” item.  
CLOCK ADJUSTMENT  
When using 2 or more VCRs of this same model, the  
clock on the second VCR and on, can be synchronized  
with the clock on the first VCR, using the CLOCK  
ADJUSTMENT function.  
Example  
@@@@@@@<SET@UP@3>  
öALARM@MODE@@@@@@@Y1  
öALARM@DURATION@@@20S  
öVERTICAL@SYNC@@@@Y  
öEXT@TIME@ADJ.@@@@03:00  
öTAPE@IN@MODE@@@@@STOP  
öTAPE@END@MODE@@@@REW  
öTAPE@END@OUT@@@@@-3M  
öCLOG@DETECT.@@@@@Y  
öSERIES@REC@IN@@@@N  
öRS-232C@@@@@@@@@@19200  
1 Connect the CLOCK SET OUT terminal on VCR 1 to  
the CLOCK SET IN terminal on VCR 2.  
2 Repeat the procedure for all the other VCRs,  
connecting the CLOCK SET OUT terminal on VCR 2  
to the CLOCK SET IN terminal on VCR 3, and so on.  
6 Press the SEARCH button to save the setting.  
ø The setting procedure on the first VCR is now  
completed.  
3 Press the MENU button until the (SET UP 3) menu is  
displayed.  
7 Repeat the procedure for all the other VCRs, setting  
“EXT TIME ADJ.” (to the same time as set on the first  
VCR).  
4 Turn the JOG dial, until the “EXT TIME ADJ.” setting  
is flashing.  
5 Turn the SHUTTLE ring to set the hour at which the  
NOTES:  
adjustment will be conducted.  
œ Connect the COM terminal on all VCRs used.  
NOTES:  
œ This function will not operate on the day the daylight  
saving/standard time is changed.  
œ Be sure to set the same time on all the VCRs.  
œ The clock adjustment cannot be set to “00:00”.  
English  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETTING THE CASSETTE EJECT MODE  
EJECT terminal connection  
Cassette Eject Setup  
VCR No. 1  
VCR No. 2  
When using 2 VCRs or more, the cassette tape of all the  
VCRs or some of the VCRs can be ejected, if the EJECT  
terminals on the VCRs are connected as indicated.  
EJECT  
COM OUT  
EJECT  
COM OUT IN  
IN  
1 Press the MENU button until the (SET UP 4) menu is  
displayed.  
@@@@@@@<SET@UP@4>  
öSW@OUT  
@@FIELD@@@@@@@@@01  
@@TIMING@@@@@@@@FIELD  
@@8H@@@@@@@@@@@@Y  
öTHREAD@CHECK@@@Y  
öVIDEO@LOSS@@@@@N  
öREC@SPEED@@@@@@N  
öEJECT@SET  
EJECT IN terminal  
œ Depending on the (SET UP 4) menu “EJECT  
MODE” setting (see “Cassette Eject Setup”), the  
cassette loaded in the VCR is ejected when there  
is an input at this terminal.  
@@EJECT@MODE@@@@EJECT1  
@@OPERATION@@@@@SLAVE  
2 Turn the JOG dial, until the “EJECT MODE” setting is  
flashing.  
EJECT OUT terminal  
3 Turn the SHUTTLE ring to set the desired cassette  
œ When the EJECT button is pressed (if the VCR is  
setup as “MASTER”, see step 5 under “Cassette  
Eject Setup”) or when there is an input (trigger) at  
the EJECT IN terminal, a signal is output at this  
terminal, even if the security lock is set or if a  
cassette is not loaded.  
eject mode.  
EJECT1 . . . . The cassette is ejected only if the  
VCR is not in recording mode.  
EJECT2 . . . . The cassette is ejected only if the  
VCR is in stop mode.  
4 Turn the JOG dial clockwise, until the “OPERATION”  
setting is flashing.  
5 Turn the SHUTTLE ring to set the desired operation.  
SLAVE . . . . . When the EJECT button is pressed,  
the cassette tape of that VCR only will  
be ejected.  
MASTER . . . When the EJECT button is  
pressed, the cassette tape of that  
VCR and of any VCR connected  
after it will be ejected.  
6 Press the SEARCH button to save the settings.  
ø The setting procedure is now completed.  
NOTE:  
œ The EJECT button will not be operative during  
recording mode.  
32  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETTING THE RS-232C OR RS-485 DATA  
TRANSFER SPEED  
The VCR can be controlled by a computer connected to  
the RS-232C connector. It can also be controlled through  
a special controller connected to the RS-485 connector.  
Data Transfer Speed Setup  
1 Press the MENU button until the (SET UP 3) menu is  
displayed.  
You must specify which connector (RS-232C or RS-485)  
is used. (Refer to “Data Transfer Speed Setup.”)  
@@@@@@@<SET@UP@3>  
öALARM@MODE@@@@@@@Y1  
öALARM@DURATION@@@20S  
öVERTICAL@SYNC@@@@Y  
öEXT@TIME@ADJ.@@@@01:00  
öTAPE@IN@MODE@@@@@STOP  
öTAPE@END@MODE@@@@REW  
öTAPE@END@OUT@@@@@-3M  
öCLOG@DETECT.@@@@@Y  
öSERIES@REC@IN@@@@N  
öRS-232C@@@@@@@@@@19200  
DIP Switches Setup  
The DIP switches need to be set when a computer,  
special controller, etc. connected to the RS-232C or  
RS-485 connectors is used to control the VCR. Make sure  
to turn the VCR power off before setting the DIP switches.  
2 Turn the JOG dial, until the “RS-232C” or “RS-485”  
setting is flashing.  
ADDRESS  
ON  
TERMINATE  
ON  
485  
NOTE:  
ON  
1
œ The display will depend on the DIP switch 9  
setting. When down “RS-232C” is displayed and  
when up “RS-485” is displayed.  
2
3
4
5
6
7
8
9
10  
OFF  
OFF  
232  
3 Turn the SHUTTLE ring to set the desired transfer  
SW No.  
speed.  
1-7: To setup the VCR address (only when using the  
RS-485 connector).  
19200  
2400  
4800  
9600  
œ Switch 1 is the least significant bit (LSB) and  
switch 7 the most significant bit (MSB) (Down: 0,  
Up: 1)  
4 Press the SEARCH button to save the setting.  
Example:  
RS232C 9-pin connector layout  
1
5
œ If the address is 1, set switch 1 to the ON side  
(up)  
œ If the address is 10, set switches 2 and 4 to the  
6
9
ON side (up)  
œ If the address is 127, set all the switches to the  
Pin  
number  
Signal Operation  
Signal direction  
ON side (up)  
8: Available (Not used)  
Receive  
2
3
7
RXD  
data  
VCR Computer  
VCR Computer  
VCR Computer  
9: To select the connector used. [232] side (down) for  
RS-232C, [485] side (up) for RS-485.  
10: To setup the termination (only when using the  
RS-485 connector).  
TXD  
Send data  
Request  
to send  
RTS  
OFF side (down): Not terminated  
Signal  
ground  
ON side (up): Terminated  
5
GND  
NOTE:  
The signal transmission is compatible with RS-232C  
specifications.  
œ Refer to the RS-232C and RS-485 command section or  
to the special controller and/or to the computer  
instruction manual.  
English  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETTING THE RS-232C OR RS-485 DATA TRANSFER SPEED  
RS485 RJ-11 connector layout  
RS-485 Connection  
This VCR can use the straight type or crossed type  
connecting cables.  
If using a straight type cable, connect it from the “A” to the  
“A” or from the “B” to the “B” RS-485 connector.  
1
6
NOTE: Do not connect to phone line.  
If using a crossed type cable, connect it from the “A” to  
the “B” or from the “B” to the “A” RS-485 connector.  
Connector A  
Pin number  
Connector B  
signal  
signal  
Types of cables  
1
2
3
4
5
6
Not used  
Not used  
A
Not used  
Not used  
B
Straight type: A cable with pin connection number  
correspondence (e.g. pin 1 to pin 1, pin 2  
to pin 2, etc.).  
B
A
Crossed type: A cable without pin connection number  
correspondence.  
Not used  
Not used  
Not used  
Not used  
A: Non-inverting driver output/receiver input  
B: Inverting driver output/receiver input  
CHECKING POWER FAILURE, FAILURE DUE TO  
CONDENSATION AND USAGE DURATION  
Example  
1 Press the MENU button until the (POWER FAILURE),  
(DEW) and (USED TIME) menu is displayed.  
@@@@<POWER@FAILURE>  
002@FAILURE@@12-25@07:15  
@@@@RECOVERY@12-25@07:30  
(POWER FAILURE). . . The number of power  
failures, and the date and  
time of the most recent  
@@@@@@@@@<DEW>  
001@FAILURE@@12-25@11:00  
@@@@RECOVERY@12-25@12:00  
@@@@@@<USED@TIME>  
@@@@VIDEO@@@@@@@@@@00003H  
@@@@POWER@@@@@@@@@@00007H  
power failure and recovery  
are displayed.  
(DEW) . . . . . . . . . . . . . The number of failures due  
to condensation, and the  
2 Press the SEARCH button, the normal screen is  
displayed.  
date and time of the most  
recent failure and recovery  
are displayed.  
NOTE:  
œ If the MENU RESET button is pressed while the  
(POWER FAILURE) and (DEW) menu is displayed, the  
data is erased. The (USED TIME) data cannot be reset.  
@” will be erased from the digital display.  
(USED TIME). . . . . . . . The video heads usage  
duration and the power on  
duration are displayed.  
34  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OUTPUT TERMINALS  
TAPE END OUT Terminal  
WARNING OUT Terminal  
œ During recording, when the end of the tape is reached  
or when the tape counter reading indicates 7 hours 57  
minutes or more, the output becomes 0V (Low).  
œ If the tape stops or other problem, the output becomes  
0V (Low).  
œ To reset the output, press the STOP or ALL RESET  
œ To reset the output, press the STOP or EJECT button.  
button or unplug the power cord then plug it back in.  
œ During autorepeat recording, when the end of the tape  
is reached, the output becomes 0V (Low) for about 2  
seconds only.  
Tape movement stop  
Output reset  
5V (H)  
Tape end or 7H57M00S  
Output reset  
(Output impedance: 5.7 k)  
0V (L)  
5V (H)  
(Output impedance: 5.7 k)  
NOTE:  
0V (L)  
œ If the output is 0V (Low) due to the clog detect function,  
it can be reset by simply pressing the STOP button.  
TAPE END OUT Terminal Output Setting  
1 Press the MENU button until the (SET UP 3) menu is  
TIMER OUT Terminal  
displayed.  
@@@@@@@<SET@UP@3>  
œ During timer recording DC 12 V (High) are output.  
(During timer recording stand-by mode, the output is  
0V (Low).)  
öALARM@MODE@@@@@@@Y1  
öALARM@DURATION@@@20S  
öVERTICAL@SYNC@@@@Y  
öEXT@TIME@ADJ.@@@@01:00  
öTAPE@IN@MODE@@@@@STOP  
öTAPE@END@MODE@@@@REW  
öTAPE@END@OUT@@@@@-3M  
öCLOG@DETECT.@@@@@Y  
öSERIES@REC@IN@@@@N  
öRS-232C@@@@@@@@@@19200  
Timer recording  
12V (H)  
(Output impedance: 5.7 k)  
2 Turn the JOG dial, until the “TAPE END OUT” setting  
0V (L)  
is flashing.  
3 Turn the SHUTTLE ring, to select the desired output  
mode.  
COM Terminal  
–3M . . . . . . . The output becomes 0 V (Low)  
when the tape counter reaches  
œ Common GND (ground) terminal when connecting  
other terminals to external devices.  
“7 57 00 ” and/or when the tape  
H
M
S
reaches the end.  
END . . . . . . . The output becomes 0 V (Low)  
when the tape reaches the end.  
4 Press the SEARCH button to save the setting.  
English  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OUTPUT TERMINALS  
SW OUT Terminal  
6 Turn the SHUTTLE ring, to set the desired “8H” mode.  
Y. . . . . . . . . . When recording in 8-hour mode, a  
pulse signal is output.  
When recording, a pulse signal is output at the SW OUT  
terminal.  
N . . . . . . . . . When recording in 8-hour mode, a  
pulse signal is not output.  
This terminal is usually connected to the switch input (SW  
IN) of devices like a camera switcher unit, or a quad  
compressor.  
7 Press the SEARCH button to save the settings.  
FIELD: 16.7 msec.  
FRAME: 5 msec.  
SERIES OUT/NON REC OUT terminal  
setting  
5V (H)  
(Output impedance: 5.7 k)  
0V (L)  
The output at the SERIES OUT/NON REC OUT terminal  
can be set.  
SW OUT Terminal Output Setting  
1 Press the MENU button until the (SET UP 1) menu is  
1 Press the MENU button until the (SET UP 4) menu is  
displayed.  
displayed.  
@@@@@@@<SET@UP@1>  
ø The FIELD (or FRAME) setting is flashing.  
öDAYLIGHT@SET@@@@@USE  
@@@@@@@@WEEK@MONTH@TIME  
@ON@@@1ST-SUN@@04@02:00  
@OFF@@LST-SUN@@10@02:00  
öOUTPUT@@@@@@@@SERIES  
öCLOCK@SET  
@10-15-99@FRI@@15:20:00  
öREMOTE@@@@@@@@EJECT  
öLANGUAGE-LANGUE-IDIOMA  
@@@ENGLISH  
@@@@@@@<SET@UP@4>  
öSW@OUT  
@@FIELD@@@@@@@@@01  
@@TIMING@@@@@@@@FIELD  
@@8H@@@@@@@@@@@@Y  
öTHREAD@CHECK@@@Y  
öVIDEO@LOSS@@@@@N  
öREC@SPEED@@@@@@N  
öEJECT@SET  
@@EJECT@MODE@@@@EJECT1  
@@OPERATION@@@@@SLAVE  
2 Turn the JOG dial, until the “OUTPUT” setting is  
flashing.  
NOTE:  
3 Turn the SHUTTLE ring, to select the desired output  
œ If “TIMING” is set to FRAME (see step 4),  
mode.  
“FRAME” will be indicated instead of “FIELD”.  
SERIES . . . . If during series recording, the  
counter reading reaches  
2 Turn the SHUTTLE ring, to set the desired pulse  
signal interval.  
7 57 00 or the tape reaches the  
H
M
S
end, a LOW signal (0 V) is output.  
The LOW (0 V) signal is output for  
about 70 seconds after the end of  
the tape is reached.  
Available settings are:  
FIELD. . . . . . 01, 02, 03, 04, 05, 10, 30 or 60 field  
FRAME . . . . 01, 02, 03, 04, 05, 10, 30 or 60 frame  
3 Turn the JOG dial clockwise until the “TIMING”  
NON REC . . If during recording the VCR enters  
a mode other than recording (i.e.  
recording pause, stop mode, etc.),  
a LOW signal (0 V) is output. If  
recording is resumed, then a HIGH  
signal (5 V) is output.  
setting is flashing.  
4 Turn the SHUTTLE ring, to set “FIELD” or “FRAME”.  
FIELD. . . . . . 1 pulse is output after each set  
number of fields.  
If in the (SET UP 2) menu, in the  
BUZZER section, WARNING is set  
to “Y”, a buzzer will be heard while  
the VCR is in non recording mode.  
The buzzer will stop if the STOP  
button is pressed (the output signal  
will remain LOW (0 V)).  
FRAME . . . . 1 pulse is output after each set  
number of frames.  
5 Turn the JOG dial clockwise until the “8H” setting is  
flashing.  
NOTE:  
œ If the TAPE SELECT switch to the “T-120”, “6H”  
4 Press the SEARCH button to save the setting.  
will be indicated instead of “8H”.  
36  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OUTPUT TERMINALS  
REMOTE Jack  
You can use a VA-RMN01 Remote Control Unit (sold  
MAINTENANCE  
Daily Inspection  
Periodic Inspection  
The following daily inspections are recommended in order  
to assure long-term and trouble-free operation of the unit.  
Periodic inspection and maintenance should be referred  
to your dealer.  
The daily inspections are particularly important if using  
autorepeat recording.  
If there is noise in the playback picture, and it cannot be  
corrected using the tracking control, it may indicated that  
the video heads need cleaning.  
The video heads should be inspected every 1,000 hours  
of use to determine if they need to be replaced.  
Inspection Procedure  
1 Turn on the power to the VCR, camera, TV monitor  
The video heads usage can be checked using the (USED  
TIME) menu.  
and other connected devices.  
2 Check that the image received on the TV monitor is  
correct.  
Cabinet Cleaning  
Clean the outside of the cabinet with a clean, soft cloth,  
moistened with lukewarm water and wrung dry.  
3 Check that the on-screen display of the date and time  
is correct.  
4 To check the recording condition of the previous day,  
rewind the recorded tape a few seconds.  
DO NOT USE SOLVENTS OR OTHER TYPES OF  
CLEANERS. THESE CHEMICALS CAN CRACK OR  
DISCOLOR THE CABINET.  
5 Press the PLAY button and check that the playback  
image is correct.  
6 Check that the recorded date and time are correct.  
About the Backup Battery  
NOTES:  
The date and time settings are maintained for up to 30  
days by a rechargeable lithium battery that is fully  
charged after the VCR has been connected to a power  
source for 48 hours or more.  
œ If the security lock is engaged, it has to be released  
before proceeding to the inspection.  
œ If any problem is discovered during the inspection,  
unplug the power cord then consult your dealer.  
Depending on the battery usage it may become  
necessary to change it. For replacement and disposal of  
the old battery, please contact your dealer.  
After the battery has been replaced, press the ALL  
RESET button, then enter all the time, date, etc. settings  
as required.  
38  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MAINTENANCE  
Maintaining and Checking The Mechanism  
To maintain the VCR functions and features working properly, and to avoid damages or dirt on the tape, it is  
recommended to follow the maintenance points and periodicity indicated below.  
For detailed information, please contact your dealer.  
Maintenance Table  
F : Cleaning  
E : Confirmation  
8000H  
k
v: Lubrication  
k : Change  
PARTS  
Tape Path System ASSY, BRAKE BAND  
ASSY, LEVER BT (tape guide)  
2000H  
4000H  
6000H  
NOTES  
E
F
F
E
F
F
F
F
F
k
F
F
k
F
F
F
F
k
E
F
F
E
F
F
F
F
F
F
FULL ERASE HEAD  
k
ASSY, ROLLER CLEANER  
ASSY, GUIDE ROLLER  
ASSY, MOUNTING INCLNE S  
ASSY, MOUNTING INCLNE T  
ACE HEAD  
ASSY, LEVER PINCH ROLLER  
MOUNTING, LIFT PINCH  
CAM, LIFT PINCH  
k
F
k
k
k
k
k
k
GEAR, CAM PINCH  
k
ASSY, EARTH CYL  
COMPL, CYLINDER  
ASSY, CYLINDER UPPER  
k
F(k)  
F(k)  
Fv  
Fv  
v
k
F
F(k)  
Fv  
Fv  
v
F
F(k)  
Fv  
Fv  
v
F(k)  
F(k)  
Fv  
Fv  
v
v
v
E
Reel Drive System ASSY, REEL SUPPLY  
ASSY, REEL TAKEUP  
GEAR, REEL S  
GEAR, REEL T  
v
v
v
PULLEY, REEL  
v
v
v
SPECIAL, WASHER 2.4 X 6 X 0.25  
COMPL, MOUNTING CLUTCH  
BELT, REEL  
MOTOR, CAPSTAN  
ASSY, GEAR FRICTION  
ASSY, BRAKE S  
E
v
E
F
v
E
E
E
k
v
k
k
k
E(k)  
vk  
E
E(k)  
v
k
vk  
E
Brake  
E
ASSY, BRAKE T  
E
E
E
ASSY, BRAKE CAPSTAN  
ASSY, BRAKE SOFT T  
ASSY, LOADING MOTOR  
DAMPER  
E
E
E
E
k
Loading Drive  
System  
E
k
k
COMPL, GEAR WORM  
CAM, MAIN  
SPECIAL WASHER 3.6 X 0.5  
GEAR, WHEEL 1  
E
E
k
k
k
k
GEAR, WHEEL 2  
MODE SWITCH  
E
E
E
E
E
E
E
E
E
E
E
k
k
SLIDE, CRECENT  
GEAR, LOAD S  
GEAR, RACK FRONT  
GEAR, RACK START  
GEAR, PINON  
BACK TENSION TORQUE  
FWD, REW TORQUE  
PLAY TORQUE  
k
k
k
k
k
Performance  
Check  
E
E
E
E
E
E
E
E
E
PB BACK TENSION TORQUE 25~50gcm  
FWD, REW TORQUE 600gcm  
PLAY 55 ~ 110gcm  
E
E
REV TORQUE  
E
REV 100 ~ 210gcm  
TROUBLESHOOTING GUIDE  
If the unit does not operate normally when you follow the instructions indicated in the manual, please refer to the table  
below.  
SYMPTOM  
POSSIBLE CAUSE  
CORRECTIVE ACTION  
No power  
The power cord is not connected  
The connections are not correct  
Connect the power cord  
No image displayed on  
the monitor TV  
Check that all connections are correct  
The power to the camera and/or monitor TV Turn all connected devices power on  
is not turned on  
The buttons do not  
respond  
A cassette tape is not loaded  
Load a cassette and turn the power on  
All functions are suspended due to  
condensation  
Wait for the “À” indicator to go off  
Alarm recording  
Wait for the alarm recording to end  
Cancel the security lock  
The security lock is engaged  
Recording is not  
possible (the tape is  
ejected)  
The loaded cassette has no  
erasure-prevention tab  
Load a cassette tape with  
erasure-prevention tab or cover the tab hole  
with adhesive tape  
Autorepeat recording is  
not possible  
“AL” is displayed on the digital display  
Display (ALARM TIME) menu, then press  
the MENU RESET button to turn off the “AL”  
indicator  
Timer recording is not  
possible  
The date and time are not set correctly  
Set the date and time correctly  
The unit is not set to timer recording  
stand-by mode  
Press the TIMER button to display “n” on  
the digital display  
“N” is selected for the timer recordings  
Be sure to select “Y” for the programmed  
timer recordings  
Alarm recording is not  
possible  
“OFF” is displayed on the digital display  
Press the EJECT, STOP or PLAY button or  
turn the SHUTTLE ring to turn the indicator  
off  
Noise in the playback  
picture  
The video heads need cleaning  
Clean the video heads  
The date and time are  
not recorded  
The ON SCREEN switch is set to the “OFF” Set the ON SCREEN switch to the “ON”  
position  
position  
The cassette tape  
cannot be ejected  
Problem with the system  
Unplug the power cord then plug it back in  
The cassette is ejected  
a few seconds after it  
has been inserted  
The tape is not threaded correctly  
Try inserting the cassette one more time or  
using a new cassette. If it is ejected again,  
please consult your dealer.  
After a Power Failure  
System Down  
If after a power failure the recording speed is reset to  
8-hour mode, it is due to insufficient backup battery  
charge. This is not a malfunction.  
If the unit does not function at all, try the following.  
1 Unplug the power cord then plug it back in.  
2 Reset the memory. (Press the ALL RESET button.  
Under normal conditions, do not touch the ALL  
RESET button.)  
3 If the problem is not corrected after performing steps  
1 and 2 a few times, consult your dealer.  
40  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIFICATIONS  
General Specifications  
Video heads system  
Dual-azimuth 4-head rotating helical scanning system:  
Dual azimuth 2-head for record and standard playback  
Dual azimuth 4-head for forward picture search, reverse picture search  
and still mode  
Audio recording  
In 8-, 24- and 40-hour modes (when using T-160 tape)  
In 6-, 18- and 30-hour modes (when using T-120 tape)  
11.12 mm /sec (8-hour mode)  
Tape speed  
Specified video cassette tape  
Recording/playback time  
VHS 1/2 inch video cassette tape  
8, 24, 40, 64 and 96 hours (when using T-160 tape)  
6, 18, 30, 48 and 72 hours (when using T-120 tape)  
approximately 3 minutes 30 seconds (when using T-160 tape)  
NTSC color TV system  
Fast forward/rewind time  
Television system  
RS-232C/RS-485 data transfer speed 19200, 9600, 4800, 2400 baud  
Video  
Recording method  
Luminance signal: FM recording  
Chrominance signal: Down-converted direct recording  
1 V(p-p), BNC, 75 , unbalanced  
Video input  
Video output  
Horizontal resolution  
1 V(p-p), BNC, 75 , unbalanced  
Black & white mode  
Color mode  
350 line or more  
300 line or more  
Audio  
Input  
Output  
Microphone input  
–8 dBs, RCA pin jack, 27 k, unbalanced  
–8 dBs, RCA pin jack, 600 , unbalanced  
–60 dBs, 3.5 mm mini jack, 10 k, unbalanced  
Connectors  
Alarm input  
Alarm output  
Low level active (0V 100msec or more)  
DC 5 V (±0.5)/5.7 k, Low at alarm  
DC 5 V (±0.5)/5.7 k, Low at switching  
DC 5 V (±0.5)/5.7 k, Low at tape end  
DC 5 V (±0.5)/5.7 k, Low at warning  
Low level active (0V 100msec or more)  
Low level active (0V 100msec or more)  
DC 5 V (±0.5)/5.7 k, Low at eject in  
DC 12 V (±0.5)/5.7 k, High at timer recording  
Low level active (0V 100msec or more)  
DC 5 V (±0.5)/5.7 kΩ  
Switch output  
Tape end output  
Warning output  
Ext timer input  
Eject input  
Eject output  
Timer output  
Series input  
Series output/Non rec output  
Clock set input  
Clock set output  
Common  
Low level active (0V 100msec or more)  
DC 5 V (±0.5)/5.7 k, Low at clock set in  
0 V (GND)  
Remote control input  
3.5 mm mini jack  
Other Specifications  
Operating temperature range  
Operating humidity range  
Power requirements  
Power consumption  
Dimensions  
5°C to 40°C  
80% or less  
120 V AC, 60 Hz  
17 W  
420 (W) x 99.5 (H) x 295.5 (D) mm  
approximately 4.4 kg  
Weight  
NOTE: The specifications and external appearance of this unit are subject to change without notice.  
English  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SANYO INDUSTRIAL VIDEO  
VCR LIMITED WARRANTY  
OBLIGATIONS  
In order to obtain warranty service, the product must be delivered to and picked up from an Authorized Sanyo Service Center at the user’s expense,  
unless specifically stated otherwise in this warranty. The names and addresses of Authorized Sanyo Service Centers may be obtained by writing to  
SFS Corporation, SFC’s warranty administrator, at any of the addresses listed below, or by calling (toll-free) 1-800-421-5013.  
New Jersey Office  
California Office  
Illinois Office  
210 Riser Road Little Ferry, NJ 07643  
201-641-3000  
1200 W. Artesia Blvd. Compton, CA 90220  
310-537-5830  
900 N. Arlington Heights Rd. Itasca, IL 60143  
708-775-1414  
THIS WARRANTY IS VALID ONLY ON SANYO PRODUCTS PURCHASED OR RENTED IN THE UNITED STATES OF AMERICA, EXCLUDING  
HAWAII AND ALL U.S. TERRITORIES AND PROTECTORATES. THIS WARRANTY APPLIES ONLY TO THE ORIGINAL RETAIL USER. THE  
ORIGINAL DATED BILL OF SALE, SALES SLIP OR RENTAL AGREEMENT MUST BE SUBMITTED TO THE AUTHORIZED SANYO SERVICE  
CENTER AT THE TIME WARRANTY SERVICE IS REQUESTED.  
Subject to the OBLIGATIONS above and EXCLUSIONS below, SANYO FISHER COMPANY warrants this SANYO product against defects in  
materials and workmanship for the periods specified below. SFC will repair or replace (at its option) the product and any of its parts which fail to  
conform to this warranty. The warranty period commences on the date the product was first purchased or rented at retail.  
LABOR  
PARTS  
1 YEAR  
VIDEO HEADS  
90 DAYS  
90 DAYS  
EXCLUSIONS  
This warranty does not cover (A) the adjustment of customer-operated controls as explained in the appropriate model’s instruction manual, or (B) the  
repair of any product whose serial number has been altered, defaced or removed.  
This warranty shall not apply to the cabinet or cosmetic parts, broken or damaged video heads, knobs or routine maintenance.  
This warranty does not apply to uncrating, setup, installation, removal of the product for repair or reinstallation of the product after repair.  
This warranty does not apply to repairs or replacements necessitated by any cause beyond the control of SFC including, but not limited to, any  
malfunction, defect or failure caused by or resulting from unauthorized service or parts, improper maintenance, operation contrary to furnished  
instructions, shipping or transit accidents, modification or repair by the user, abuse, misuse, neglect, accident, incorrect power line voltage, fire, flood  
or other Acts of God, or normal wear and tear.  
The foregoing is in lieu of all other expressed warranties and SFC does not assume or authorize any party to assume for it any other obligation or  
liability.  
THE DURATION OF ANY WARRANTIES WHICH MAY BE IMPLIED BY LAW (INCLUDING THE WARRANTIES OF MERCHANTABILITY AND  
FITNESS) IS LIMITED TO THE TERM OF THIS WARRANTY. IN NO EVENT SHALL SFC BE LIABLE FOR SPECIAL, INCIDENTAL OR  
CONSEQUENTIAL DAMAGES ARISING FROM OWNERSHIP OR USE OF THIS PRODUCT, OR FOR ANY DELAY IN THE PERFORMANCE OF  
ITS OBLIGATIONS UNDER THIS WARRANTY DUE TO CAUSES BEYOND ITS CONTROL. SOME STATES DO NOT ALLOW LIMITATIONS ON  
HOW LONG AN IMPLIED WARRANTY LASTS AND/OR DO NOT ALLOW THE EXCLUSION OR LIMITATION OF CONSEQUENTIAL DAMAGES,  
SO THE ABOVE LIMITATIONS AND EXCLUSIONS MAY NOT APPLY TO YOU.  
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE.  
ATTENTION  
For your protection in the event of theft or loss of this product, please fill in the information below for you own personal records.  
Model No.  
_____________________________________________  
Serial No.  
______________________________________________  
(Located on back or bottom side of unit.)  
Date of Purchase  
Where Purchased  
_______________________________________  
Purchase Price  
_________________________________________  
_________________________________________________________________________________________________  
42  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SANYO Electric Co., Ltd.  
1AC6P1P2099–AC  
RC4QR/U3  
(0601KP-01)  
Issue No. 5  
Copyright SANYO, 2000 All rights reserved.  
Printed in Japan  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Earthquake Sound Speaker TNT 10DVC User Manual
Eiki Cassette Player 3279A User Manual
Electro Voice Music Mixer PSX1000 User Manual
Eton Portable Radio FR160 User Manual
Extron electronic Stereo Amplifier DA RGBHV User Manual
FieldServer Computer Drive FS 8704 09 SNMP User Manual
Frigidaire Freezer FFFU13M1QW User Manual
Frigidaire Microwave Oven FFMV152CL User Manual
GE Fryer 169030 User Manual
Gianni Industries Door LZ 150 User Manual