Fisher Price Riding Toy P6831 User Manual

P6831  
R0322  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Parts  
Note: Some parts shown are assembled to both sides of the trike.  
Handlebar Front  
Handlebar Back  
Upper Steering Ring  
Frame  
Lower  
Steering Ring  
Fork  
Seat  
Front Wheel  
Assembly  
2 Fork Covers  
Seat Pin  
4 Pedal Hubs  
Rear Axle  
2 Pedal Blocks  
Part not shown: Label Sheet  
2 Rear  
Wheel Hubs  
2 Rear  
Wheels  
2 Rear  
Wheel Caps  
.354"  
#8 x 2¼" Screw - 1  
#8 x ¾" Screw - 6  
#6 x 1/2" Screw - 2  
.354" Cap Nut - 2*  
ALL FASTENERS SHOWN ACTUAL SIZE  
*We’ve included one extra .354" cap nut for your convenience.  
Note: Tighten and loosen the screws with a Phillips screwdriver. Do not over-tighten the screws.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Assembly  
Rear  
Wheel  
(Indented  
Side Down)  
Rear Wheel  
(Flat Side First)  
Rear Wheel Hub  
(Flat Side Down)  
Rear Axle  
Rear Wheel Hub  
(Pointed End First)  
3
Rear Axle  
Turn the assembly upright.  
• Slide a rear wheel, rounded side first, onto the end of the  
rear axle.  
• Slide a rear wheel hub, pointed end first, onto the end of  
the rear axle.  
1
• Slide a rear wheel hub, rounded side up, onto the  
rear axle.  
• Slide a rear wheel, indented side down, onto the rear axle.  
Frame  
Rear Axle Assembly  
Bottom View  
2
Turn the frame upside down.  
• Insert the rear axle assembly through the holes in the rear  
of the frame.  
.354"  
4
• Fit a cap nut on the end of the rear axle.  
Tap the cap nut with a hammer. Gently pull the rear  
wheel to be sure the cap nut is securely attached to  
the rear axle.  
Hint: You may need the help of another adult to hold the  
other end of the rear axle in place.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Assembly  
Fork Arms  
Front Wheel  
Assembly  
Groove  
Rear Wheel Hub  
Fork Cover  
Pedal Axle  
7
Rear Wheel Cap  
5
• Place the front wheel assembly between the fork arms.  
Make sure the pedal axle fits into the groove at the bottom  
of each fork arm.  
• Place a fork cover over the pedal axle on one fork arm.  
• Insert two #8 x ¾" screws into the fork cover and tighten.  
• Fit the tabs on a rear wheel cap into the slots in the rear  
wheel hub. Push to "snap" the rear wheel cap in place.  
• Repeat this procedure to attach the other rear wheel cap  
to the other wheel hub.  
• Repeat this procedure to attach the other fork cover to the  
other fork arm.  
Pedal Axle Tab  
Pedal Hub  
Pedal Hub  
6
Lower Steering Ring  
• Fit two pedal hubs onto the pedal axle tabs. Make sure  
the tabs fit into the slot in each pedal hub.  
• While holding the pedal hubs on the pedal axle, insert the  
pedal axle into the hole in the center of the front wheel.  
• Press the pedal hubs into the center of the front wheel  
until they are flush with the surface of the front wheel.  
• Repeat this procedure on the other side with the other  
two pedal hubs.  
8
• Fit the lower steering ring onto the frame, as shown.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Assembly  
Fork Post  
Lower  
Steering Ring  
Handlebar Front  
Handlebar Back  
Fork Post  
¾" Screw  
¾" Screw  
Fork Cover  
9
11  
• While holding the lower steering ring in place, insert the  
fork post up through the hole in the neck of the frame.  
Make sure the fork is positioned so that the fork covers  
face the rear wheels.  
• Fit the handlebar front to the fork post, as shown.  
• Fit the handlebar back to the fork post and handlebar front.  
Hold them together firmly.  
• Insert the remaining #8 x ¾" screws through the outer  
holes in the handlebar back and tighten.  
Upper  
Steering Ring  
2¼" Screw  
12  
10  
• Insert the #8 x 2¼" screw through the center hole in the  
handlebar back and tighten.  
• Fit the upper steering ring onto the frame, as shown.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Assembly  
Seat  
1/2" Screw  
Seat Pin  
13  
14  
• Fit the seat onto the frame.  
• Insert the seat pin into the holes in the frame.  
• Fit the pedal blocks onto each pedal for smaller riders.  
Insert a #6 x 1/2" screw into hole in each pedal block  
and tighten.  
Hint: The seat is adjustable to your child's size. Have your  
child sit on the seat and check the foot pedal distance.  
Adjust the seat up or down for your child's comfort.  
• Remove the pedal blocks for bigger riders and store for  
future use.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Consumer Information  
IMPORTANT! It is a good practice to start training children  
very young regarding the importance of helmet use. When  
children are older and riding bicycles and faster vehicles,  
it is important that they use a helmet each and every time  
they ride. For this reason, even while riding a tricycle, it is  
a good idea to familiarize your child with helmet use,  
so that it becomes a habit for life. Choose a helmet that  
complies with requirements of the applicable certifying  
agency for bicycle helmets.  
Care  
• Periodically, check the plastic parts and if broken or cracked,  
dispose of them properly.  
• Periodically, check all fasteners regularly to be sure they  
are tight. If the fasteners are not tight, tighten them  
as necessary.  
To clean, use a mild soap and water solution and a clean  
cloth. Rinse clean with water to remove soap residue.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  

ELAN Home Systems Speaker PSP6 User Manual
Eureka Dishwasher fdem 3101 User Manual
Euro Pro Convection Oven TO292H User Manual
Frigidaire Air Conditioner FRA144HT2 User Manual
Gaggenau Refrigerator 235 User Manual
GE Microwave Oven RVM1335 User Manual
Genelec Speaker 7060B User Manual
GE Water Heater AP13787 User Manual
GE Water Heater GEH50DEED User Manual
Globalsat Technology GPS Receiver GH 615B GH 615M User Manual