Fisher Price Riding Toy M0409 User Manual

CUSTOM EDITION

Please read this manual and save it

with your original sales receipt.

Tools needed for assembly: Phillips Screwdriver

(not included); Assembly Tool (included). Use only with

a Power Wheels^®12 Volt Lead Acid Rechargeable Battery

with Built-in Thermal Fuse and Power Wheels^®

12 Volt Charger with Type 12V Connector (both included).

Requires four "C" (LR14) alkaline batteries (not included)

for FM Radio operation.

Product features may vary

from the picture above.

Owner's Manual

with Assembly

Instructions

For Model M0409

Download from Www.Somanuals.com. All Manuals Search And Download.

WARNINGS AND CAUTIONS

ELECTRICAL HAZARD

WARNING

• Battery can fall out and injure a child if vehicle tips over. Always use battery retainer.

• PREVENT FIRE

- Never modify the electrical system. Alterations could cause a fire resulting in serious injury

and could also ruin the electrical system.

- Use of the wrong type battery or charger could cause a fire or explosion resulting in

serious injury.

- Use of Power Wheels^®components in products other than Power Wheels^®vehicles could

cause overheating, fire or explosion.

• The battery must be handled by adults only. The battery is heavy and contains sulfuric acid

(electrolyte). Dropping the battery could result in serious injury.

• Never allow children to charge the battery. Battery charging must be done by adults only. A

child could be injured by the electricity involved in charging the battery.

• Read the safety instructions on the battery.

• Examine the battery, charger and their connectors for excessive wear or damage each time

you charge the battery. If damage or excessive wear is detected, do not use the charger or the

battery until you have replaced the worn or damaged part.

• HOT motors. Handle carefully.

RIDING HAZARD

WARNING

• Prevent Injuries and Deaths

• Direct Adult Supervision Required

• Never Ride at Night.

• Keep Children Within Safe Riding Areas.

These areas must be:

- away from swimming pools and other bodies of water to prevent drownings

- generally level to prevent tipovers

- away from steps, steep inclines, cars, roads and alleys.

• Riding Rules

Make sure children know and follow these rules for safe driving and riding.

- Always sit on the seat.

- Always wear shoes.

- Only 2 (two) riders at a time.

CAUTION

• In the unassembled state, this package contains small parts. Adult assembly is required.

• Use the charger in dry locations only.

H4433pr-0920

M0409pr-0920

Download from Www.Somanuals.com. All Manuals Search And Download.

PARTS

• If you experience a problem with this product, or are missing a part, please call us at 1-800-348-0751, rather than return this product

to the store.

• Please identify all parts before assembly and save all packaging material until assembly is complete to ensure that no parts are discarded.

Note: Some parts of this product have been packed with a protective foam cover. After removing the foam cover, you may notice a cloudy film

on the parts. Wipe these parts with a clean, dry, soft cloth to remove this residue.

2 Doors

(Left and Right)

Vehicle

Seat

Front End

Windshield/Dash

Bumper

Hood

Grille

MH4043039pr-0920

Download from Www.Somanuals.com. All Manuals Search And Download.

PARTS

Steering Column

2 Front Wheels

(Left and Right)

Steering Wheel

2 Wheel Covers

Steering Wheel Cap

2 Wings

(Left and Right)

Speaker Box

Assembly

2 Headlights

(Left and Right)

2 Door Plates

Steering Column Cap

2 Hubcaps

2 Bushings

2 Taillights

(Left and Right)

M0409pr-0920

Download from Www.Somanuals.com. All Manuals Search And Download.

PARTS

12 Volt Battery

2 Short Seat Belts

12 Volt Charger

⁷/₁₆" Washer – 2

³/₈" -16 Lock Nut – 2

Long Seat Belt

⁵/32" x 1¹/2" Pin – 1

#8 x ³/₄" Screw – 37

Assembly Tool

¹/₄x 1¹/₄" Screw – 2

For your convenience, we included extra fasteners!

Note: Tighten and loosen all screws with a Phillips screwdriver.

Do not over-tighten the screws.

Key Assembly

Fasteners Shown Actual Size

M0409pr-0920

Download from Www.Somanuals.com. All Manuals Search And Download.

PARTS PICTURE

Note: Some parts shown are assembled on both sides of the vehicle.

Parts Not Shown

Vehicle

Door Plates - 2

17 Bushing - 2

18 /₁₆" Washers - 2

25 Key Assembly

26 Assembly Tool

19 Speaker Box Assembly 27 Steering Column Cap

³/₈"-16 Lock Nuts - 2

¹/₄" x 1¹/₄" Screws - 2

#8 x ³/₄" Screws - 37

Label Sheet

Front End

Bumper

Grille

10 Seat

11 Short Seat Belts - 2

12 Long Seat Belt

13 Wings - 2

14 Front Wheels - 2

15 Wheel Covers - 2

16 Hubcaps - 2

20 Steering Wheel

21 Steering Column

22 Taillight - 2

23 12 Volt Charger

24 12 Volt Battery

28 Steering Wheel Cap

Headlights - 2

Doors - 2

Hood

29 /₃₂" x 1¹/₂" Pin - 1

Windshield/Dash

M0409pr-0920

Download from Www.Somanuals.com. All Manuals Search And Download.

BATTERY CHARGING

ELECTRICAL HAZARD

CAUTION

WARNING

• Battery can fall out and injure a child

if vehicle tips over. Always use battery

retainer.

Use the charger in dry locations only.

About Thermal Fuses

Your Power Wheels 12 volt battery is equipped with a built-in

• PREVENT FIRE

- Never modify the electrical system.

Alterations could cause a fire resulting

in serious injury and could also ruin the

electrical system.

- Use of the wrong type battery or charger

could cause a fire or explosion resulting

in serious injury.

- Use of Power Wheels^®components in

products other than Power Wheels^®

vehicles could cause overheating, fire

or explosion.

thermal fuse. The thermal fuse is a self-resetting safety device which

automatically “trips” and shuts down operation of the vehicle if the

vehicle is overloaded or the driving conditions too severe. Once a fuse

has “tripped”, remove your foot from the pedal and wait approximately

25 seconds before operating the vehicle again. To avoid repeated

automatic shut-downs, do not overload the vehicle by exceeding the

130 lbs (59 kg) maximum weight capacity or by towing anything behind

the vehicle. Avoid severe driving conditions, such as driving up slopes

or running into fixed objects, which can cause the wheels to stop

spinning while power is still being supplied to the motors and make

sure your child stops the vehicle before switching speeds or direction.

If a thermal fuse in a battery continually trips under normal driving

conditions, please contact your local Power Wheels^®Authorized

Service Center. For the location of the Authorized Service Center

nearest to you, visit us on-line at www.powerwheels.com,

or call 1-800-348-0751.

• The battery must be handled by adults

only. The battery is heavy and contains

sulfuric acid (electrolyte). Dropping the

battery could result in serious injury.

• Never allow children to charge the battery.

Battery charging must be done by adults

only. A child could be injured by the elec-

tricity involved in charging the battery.

Important Notes

• Your new battery must be charged for at least 18 hours before

you use it in your vehicle for the first time.

• We recommend that you start charging your battery before

beginning assembly of your new vehicle.

• Read the safety instructions on the battery.

• Examine the battery, charger and their

connectors for excessive wear or damage

each time you charge the battery. If

• The battery must be upright while charging.

• The charger is not a toy.

• Do not short circuit the battery.

damage or excessive wear is detected, do

not use the charger or the battery until you

have replaced the worn or damaged part.

• You do not need to remove the battery from your vehicle to

recharge it.

• Before charging the battery, examine the battery case for cracks

and other damage which may cause sulfuric acid (electrolyte) to

leak during the charging process. If damage is detected, do not

charge the battery or use it in your vehicle. Battery acid is very

corrosive and can cause severe damage to surfaces it contacts.

• Do not charge the battery on a surface (such as a kitchen counter

top) which could be damaged by the acid contained inside the

battery. Take precautions to protect the surface on which you charge

your battery.

• Use only a Power Wheels^®12 volt charger with "12V" connector

(input 120 VAC, 60 Hz with an output of 12 VDC, 1200 mA)

to charge your Power Wheels^®12 volt battery.

Adults Note: Regularly examine the charger for damage to the

cord, plug, housing or other parts that may result in the risk of fire,

electric shock or injury. In the event of any damage, do not use

the charger until the damage has been properly repaired. Please

call 1-800-348-0751.

• If your battery is old and will not accept a charge, do not leave it in

the vehicle. Always remove a dead battery from the vehicle.

M0409pr-0920

Download from Www.Somanuals.com. All Manuals Search And Download.

BATTERY CHARGING

ASSEMBLY

WARNING

Power Indicator

Children can be harmed by small parts,

sharp edges and sharp points in the

vehicle's unassembled state, or by electrical

items. Care should be taken in unpacking

and assembly of the vehicle. Children should

not handle parts, including the battery, or

help in assembly of the vehicle.

battery

Charger

Connector

• Plug the charger connector into the battery

• Plug the charger into a standard wall outlet

Notes:

- If power flow to the wall outlet is controlled by a switch, make sure

the switch is “ON”.

- Use the charger only in a wall outlet. Do not plug the charger into

a ceiling outlet.

- The power indicator on the charger does not indicate the charge

status of your battery. The power indicator allows you to see that

there is power from the wall outlet.

Bushing

Front Axle

⁷/16" Washer

• Before first-time use, charge the battery for at least 18 hours.

Never charge the battery longer than 30 hours.

RIGHT SIDE VIEW

• Recharge the battery for at least 14 hours after each use of your

vehicle. Do not charge the battery longer than 30 hours.

• Slide a ⁷/16" washer onto a front axle.

• Fit a bushing (flat side first) onto the front axle.

• Repeat this procedure to assemble the other ⁷/16" washer and

bushing to the other front axle.

• Once the battery is charged, pull firmly on the charger connector

to disconnect it from the battery. Unplug the charger from the wall

outlet. The battery is now ready to be installed in your vehicle.

Please see the Battery Installation section on page 23 for detailed

instructions on installing your battery. If your battery is already

installed in your vehicle, simply re-connect the motor harness

connector to the battery. Close the hood.

H4433pr-0920

M0409pr-0920

Download from Www.Somanuals.com. All Manuals Search And Download.

ASSEMBLY

³/8" -16 Lock Nut

Front Axle

Front Wheel

Assembly Tool

• Place a ³/8" -16 lock nut (rounded side out) onto a front axle.

Hint: There is a right and a left front wheel. Place the right wheel

(marked R) on the passenger side of the vehicle, and the left wheel

(marked L) on the driver side of the vehicle.

IMPORTANT: Tighten the lock nut firmly using the closed end of the

assembly tool.

• Repeat this procedure to fasten the other front wheel assembly with

the other ³/8" -16 lock nut.

• Place a front wheel onto each front axle.

Wheel Cover

Front Wheel

Hubcap

Wheel

Cover

• Fit a wheel cover onto each front wheel.

• Align the slot in a hubcap with the rib in the wheel cover. "Snap" a

hubcap into the center of each wheel cover.

M0409pr-0920

Download from Www.Somanuals.com. All Manuals Search And Download.

ASSEMBLY

Front End

Battery

Compartment

TOP VIEW

Vehicle

• Insert two /4 x 1 /4 screws inside of the battery compartment and

into the front end of the vehicle. Tighten the screws.

• Fit the front end onto the vehicle.

• Insert the tabs on the back edge of the front end into the slots in

the vehicle.

Front End

Bumper

RIGHT SIDE VIEW

• Fit the bumper onto the front end.

• Insert two #8 x /4 screws through the front end and into the

vehicle. Tighten the screws.

M0409pr-0920

H4433pr-0920

Download from Www.Somanuals.com. All Manuals Search And Download.

ASSEMBLY

Bumper

Grille

• Insert seven #8 x /4 screws into the bumper and tighten.

• Insert two #8 x /4 screws the top of the grille. Tighten the screws.

Grille

Bumper

• Fit the grille onto the bumper.

• Push down to fit the tabs on the grille into the slots in the bumper.

• Before applying the labels, wipe the surface of the vehicle with a

clean, dry cloth to remove any dust or oils.

• Place the labels exactly as shown in the illustration.

• For best results, avoid repositioning a label once it has been applied

to the vehicle.

H4433pr-0920

M0409pr-0920

Download from Www.Somanuals.com. All Manuals Search And Download.

ASSEMBLY

Doors

Headlights

• Fit the headlights (left and right) onto the bumper.

• Fit the door pegs onto the holes near the front end of the vehicle.

Hint: There is a left and right door. They are designed to be

assembled one way.

Plates

Headlights

• Insert two #8 x /4 screws into the top edge of each headlight.

Tighten the screws.

• Fit the large hole on the plates to the door posts.

• Align the holes in the plates with the holes in the top side of

the vehicle.

M0409pr-0920

Download from Www.Somanuals.com. All Manuals Search And Download.

ASSEMBLY

Windshield/Dash

Dash

Connectors

Radio

Connectors

• Insert three #8 x /4 screws into each plate and tighten.

• Open the doors on the vehicle.

• Place the windshield/dash on top of the front end of the vehicle.

• Plug both dash connectors together.

• Plug both radio connectors together.

Motor Harness

Connector

Hint: If the connectors do not fit together, do not force them. Simply

turn one of them over and try again!

Dash

Connector

Front

Windshield/

Dash

Radio

Connector

BACK VIEW

• Separate the radio and dash connector wires from the motor

harness connector.

FRONT VIEW

• Position the motor harness connector towards the front of the

vehicle and into the battery compartment.

• Fit the tabs on the windshield/dash into the slots in the front end of

the vehicle.

• Position the dash connector and radio connector wires toward the

back of the vehicle.

M0409pr-0920

Download from Www.Somanuals.com. All Manuals Search And Download.

ASSEMBLY

IMPORTANT! Turn the vehicle on its side or over to complete

assembly steps 24-29.

Metal

Bar Hole

Steering

Column

Vehicle

Hole

• Insert four #8 x /4 screws into the base of the windshield/dash.

Tighten the screws.

BOTTOM VIEW

• Wipe the steering column with a paper towel to remove any

excess lubricant.

• First, insert the straight end of the steering column down through

the hole in the metal bar A ; then through the hole in the vehicle

floor B ; and finally, out through the hole in the dash.

Dash

Steering

Column

Steering

Rod

DASH VIEW

• Insert two #8 x /4 screws into the sides of the windshield/dash.

Tighten the screws.

• Close the doors on the vehicle.

• Insert the curved end of the steering column through the hole in the

steering rod.

M0409pr-0920

Download from Www.Somanuals.com. All Manuals Search And Download.

ASSEMBLY

Large Opening

Steering Wheel Cap

Steering Wheel

Steering Column

DASH VIEW

• Insert and "snap" the steering wheel cap into the center of the

steering wheel.

• Position the steering wheel so that the large opening is UP.

• Fit the steering wheel onto the steering column.

Steering

Column Cap

Press Wheel

• Fit the steering column cap

onto the end of the

steering column.

Lift Steering

Column

• Insert a #8 x /₄screw through the large opening in the steering

column cap and into the hole in the steering column. Tighten

the screw.

• While pressing down on the steering wheel, grasp the steering

column under the dash and pull it up as far as it will go.

• Turn the vehicle upright.

• Insert the /32" x 1 /2 pin through the hole in the steering column.

• Grasp the steering column again and pull down to fit the pin into the

center of the steering wheel.

M0409pr-0920

Download from Www.Somanuals.com. All Manuals Search And Download.

ASSEMBLY

1.5V x 4

"C" (LR14)

Key

Assembly

Battery Safety Information

In exceptional circumstances, batteries may leak fluids that can cause

a chemical burn injury or ruin your product. To avoid battery leakage:

• Do not mix old and new batteries or batteries of different types:

alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium).

• Insert batteries as indicated inside the battery compartment.

• Remove batteries during long periods of non-use. Always remove

exhausted batteries from the product. Dispose of batteries safely. Do

not dispose of product in a fire. The batteries may explode or leak.

• Never short-circuit the battery terminals.

• Use only batteries of the same or equivalent type, as recommended.

• Do not charge non-rechargeable batteries.

• Insert and "snap" the key assembly into the slot in the dash.

• Remove rechargeable batteries from the product before charging.

• If removable, rechargeable batteries are used, they are only to be

charged under adult supervision.

Loosen These

Screws

Hood

• Locate the FM Radio on the dash.

• Loosen both screws in the battery compartment door.

• Remove the battery compartment door.

• Insert four, new "C" (LR14) alkaline batteries.

Hint: We recommend using alkaline batteries for longer life.

• Replace the battery compartment door and tighten the screws.

• When sounds become faint or stop, it’s time for an adult to change

the batteries! Please refer to page 27 for general information and

tips for use of the FM Radio.

FRONT VIEW

• Fit the long tabs on the hood into the slots in the front end of

the vehicle.

M0409pr-0920

Download from Www.Somanuals.com. All Manuals Search And Download.

ASSEMBLY

Seat

TOP VIEW

Hood

Tab

Slot

Slots

• Lower and fit the side tabs on the hood into the slots on each side

of the front end of the vehicle.

• Insert the two tabs on the front edge of the seat into the slots in

the vehicle.

Short Seat Belts

Seat

Long Seat Belt

• Insert the fastener end of a short seat belt strap through the slot

near the outer edge of the seat. Make sure the side of the seat belt

with the fastener faces the outer edge of the seat.

BACK VIEW

• Insert two #8 x /⁴screws into the back of the seat. Tighten

the screws.

• Pull the short seat belt strap completely through the slot until the

last T-loop at the opposite end of the belt catches against the slot.

You will pull one T-loop through the slot.

• Repeat this procedure to assemble the other short seat belt strap.

• Insert each fastener end of the long seat belt strap through a slot in

the center of the seat. Make sure the fasteners face the outer edge

of the seat.

• Pull each side of the long seat belt strap evenly through the slots.

Make sure to pull each T-loop through a slot.

M0409pr-0920

Download from Www.Somanuals.com. All Manuals Search And Download.

ASSEMBLY

Wings

Taillight Tabs

• Before applying the labels, wipe the surface of the vehicle with a

clean, dry cloth to remove any dust or oils.

• Fit the wing tabs into the slots in the top edge near the rear of

the vehicle.

• First apply the inside edge of a label to the back end of the

vehicle. Next, apply the outside edge of the label to the side of

the vehicle. Then, smooth the center of the label. (The edges will

overlap slightly.)

Hints:

• There is a left and right wing. They are designed to be assembled

one way.

• For best results, avoid repositioning a label once it has been applied

to the vehicle.

• Make sure the tabs on the top of the taillights fit into the bottom of

each wing.

Taillights

• Fit the taillights (left and right) onto the rear of the vehicle.

• Insert two #8 x /⁴screws into each wing. Tighten the screws.

M0409pr-0920

Download from Www.Somanuals.com. All Manuals Search And Download.

ASSEMBLY

Speaker Box Assembly

Speaker Connector

• Position the speaker box assembly over the back end of the vehicle.

• Plug both speaker connectors together.

• Insert three #8 x /4 screws into the top of the speaker assembly.

Tighten the screws.

Hint: If the connectors do not fit together, do not force them. Simply

turn one of them over and try again!

Assembly is now complete.

Speaker Box Assembly

• Fit the speaker box assembly onto the vehicle.

M0409pr-0920

Download from Www.Somanuals.com. All Manuals Search And Download.

DECORATION

Proper label application will help to keep the labels looking their best! When applying labels, keep the following guidelines in mind:

• Wash your hands before applying the labels.

• Before applying the labels, wipe the surface of the vehicle with a clean, dry cloth to remove any dust or oils.

• Place the labels exactly as shown in the illustrations.

• For best results, avoid repositioning a label once it has been applied to the vehicle.

• After applying a label, rub the label firmly with a clean, dry cloth to make sure the label is adhered to your vehicle.

Start at the center of a label, and smooth towards the outer edges to remove air bubbles.

FRONT VIEW

M0409pr-0920

Download from Www.Somanuals.com. All Manuals Search And Download.

DECORATION

REAR VIEW

DASH VIEW

M0409pr-0920

Download from Www.Somanuals.com. All Manuals Search And Download.

BATTERY INSTALLATION

IMPORTANT! Use only a Power Wheels^®12 volt lead-acid

rechargeable battery. Use of any other battery will damage your

vehicle. Make sure that you charge the battery for at least 18

hours using the enclosed Power Wheels^®12 volt charger before

operating your vehicle for the first time. Charge the battery for at

least 14 hours after each use of the vehicle. Never charge the

battery longer than 30 hours. Failure to follow these instructions

may damage your battery and will void your warranty.

Power Wheels^®

12 Volt Battery

Hood

Battery

Retainer

Battery

Compartment

• Push the battery retainer.

• Place the 12 volt battery into the battery compartment. Make sure

the battery retainer slides over the battery.

Power Wheels^®

12 Volt Battery

• To close the hood, fit the tabs on the front end of the hood into the

slots on each side of the front end of the vehicle.

Motor Harness

Connector

• Lift the hood to access the battery compartment.

• Plug the motor harness connector into the 12 volt battery.

M0409pr-0920

Download from Www.Somanuals.com. All Manuals Search And Download.

BATTERY CARE AND DISPOSAL

Care

Disposal

If a battery leak develops, avoid contact with the leaking acid and

place the damaged battery in a plastic bag. See information below

for proper disposal.

• Your Power Wheels^®battery is a non-spillable, sealed lead-acid

battery. It must be recycled or disposed of in an environmentally

sound manner.

If acid comes in contact with skin or eyes, flush with cool water for

at least 15 minutes and call a physician.

• Do not dispose of a lead-acid battery in a fire. The battery may

explode or leak.

If acid is internally ingested, give water, milk of magnesia or egg

whites immediately. Never give emetics or induce vomiting. Call

a physician.

• Do not dispose of a lead-acid battery in your regular, household

trash. The incineration, landfilling or mixing of sealed lead-acid

batteries with household trash is prohibited by law in most areas.

• Charge a new battery for at least 18 hours before first use.

Never charge the battery longer than 30 hours. Overcharging or

undercharging the battery may shorten battery life and decrease

vehicle running time.

• Protect the environment by not disposing of this product with

household waste (2002/96/EC). Check your local authority for

recycling advice and facilities (Europe only).

• Return an exhausted battery to a federal or state approved lead-acid

battery recycler, such as a Power Wheels^®authorized service center

or a local seller of automotive batteries. For the authorized service

center location nearest to you, please visit us on-line at

www.powerwheels.com or call 1-800-348-0751. Contact your

local waste management officials for other information regarding

the environmentally sound collection, recycling and disposal of

lead-acid batteries. If you live in the State of Florida or the State of

Minnesota, it is prohibited by law for anyone to throw away lead-acid

batteries in the municipal waste stream.

• After the first charge, recharge the battery for at least 14 hours

after each use. Never charge the battery longer than 30 hours.

Charge the battery after each use, regardless of how long the

vehicle was used.

• The battery must be upright while charging.

• Do not allow the battery to run down completely before charging.

• Charge the battery before storing the vehicle.

• Charge the battery at least once per month, even if the vehicle has

not been used.

• Leaving the battery in a discharged condition will ruin it.

• Always remove an exhausted battery from the vehicle. Battery

leakage and corrosion can damage the vehicle.

• Do not store the battery on a surface (such as a kitchen counter

top) which could be damaged by the acid contained inside the

battery. Take precautions to protect the surface on which you store

the battery.

• Do not store the battery in temperatures above 75° F or below -10° F.

• Use only a Power Wheels^®12 volt battery. Remember to charge the

new battery for at least 18 hours before first use.

• Prevent the battery from moving freely inside the battery compart-

ment. Always use the battery retainer to secure the battery in

the battery compartment.

• Examine the battery, charger and their connectors for excessive

wear or damage each time you charge the battery. If damage is

detected, do not use the charger or the battery until you have

replaced the worn or damaged part.

M0409pr-0920

Download from Www.Somanuals.com. All Manuals Search And Download.

SAFE DRIVING RULES

Teach Safety Rules to Children

RIDING HAZARD

While children can quickly develop the skill necessary to drive this

vehicle, it is important to remember that their judgment skills are still

very immature. Unsupervised driving by children can lead to serious

injury. Before children use this vehicle, an adult should carefully

evaluate the driving area as well as the children’s skill level and ability

to drive this vehicle safely. Children are not always able to recognize

or anticipate hazards, even when they have been taught about them.

There is no acceptable substitute for direct adult supervision.

WARNING

• Prevent Injuries and Deaths

• Direct Adult Supervision Required

• Never Ride at Night.

• Keep Children Within Safe Riding Areas.

These areas must be:

- away from swimming pools and other

bodies of water to prevent drownings

- generally level to prevent tipovers

- away from steps, steep inclines, cars,

roads and alleys.

Teach appropriate safety rules to your child before allowing operation

of this vehicle. These rules should also be reviewed with neighborhood

children or other playmates who want to drive this vehicle.

Riding Rules

Make sure children know and follow these rules for safe driving:

1. Always sit on the seat.

2. Always wear shoes.

• Riding Rules

3. Only 2 (two) riders at a time. A child who is not sitting on the seat or

who is standing on the vehicle could fall off, cause a tip-over or block

the driver’s view. A child could be seriously injured.

Make sure children know and follow

these rules for safe driving and riding.

- Always sit on the seat.

- Always wear shoes.

- Only 2 (two) riders at a time.

4. Do not allow any child to drive the vehicle in the street or near

moving (motorized) vehicles.

5. Do not allow any child to drive near bodies of water (such as pools

or creeks), obstructions (such as furniture, low tree limbs or play

equipment), or drop-offs (such as stairs or decks).

6. Do not allow any child to drive the vehicle in the dark. A child could

encounter unexpected obstacles and have an accident. Operate the

vehicle only in the daytime or a well-lit area.

7. Do not allow your child to drive on sloped or inclined surfaces.

Restrict your child’s driving to generally level ground ONLY!

8. Do not allow your child to drive down or across a steep slope.

- The vehicle may gain unsafe speed, even if the pedal is released

to stop.

- The vehicle may tilt and tip over.

- The wheels could lose traction, causing the vehicle to slip.

9. Do not allow your child to drive up steep inclines. The motor may

stop and the vehicle could roll backwards at an unsafe speed.

10. Never put anything near any moving parts. Rotating parts such as

motors, gear boxes and wheels can snag fingers, hair, etc., causing

serious injury. Do not allow operation of the vehicle when it is on its

side or in an upside-down position.

11. Do not operate the vehicle near flammable vapors (gasoline, paint

thinner, acetone, liquid wax, etc.). The vehicle’s electrical switches,

like most electrical switches, emit an internal spark when first turned

on or turned off. The presence of flammable liquids or vapors could

cause an explosion or a fire. Keep all flammable products in tightly

sealed containers and away from the vehicle.

12. Do not allow a child to operate the vehicle without direct adult

supervision. To prevent unsupervised use of the vehicle, disconnect

the motor harness from the battery when the vehicle is not in use.

M0409pr-0920

Download from Www.Somanuals.com. All Manuals Search And Download.

VEHICLE OPERATION

IMPORTANT! Use this vehicle ONLY outdoors. Most interior floor-

ing can be damaged by riding this vehicle indoors. Fisher-Price^®

will not be responsible for damage to the floor if the vehicle is

used indoors.

Beginner Use - Low Speed Drive

• Your vehicle has a patented, electronic braking system that

automatically stops the vehicle when your child’s foot lifts from

the pedal. Make sure your child is comfortable with steering the

vehicle and automatically knows how to stop.

As assembled, your vehicle is ready to roll in low speed

(2¹/2 mph, maximum). It has been pre-set so it will only operate in

low speed. After your child has mastered the basic skills of driving

and understands the rules for safe driving, it’s time to remove the

high speed lock-out screw to allow the vehicle to operate in low or

high speed. See the instructions on this page to remove the high

speed lock-out screw.

Advanced Use - High Speed Drive

Place

lock-out screw

here for storage.

Remove

lock-out screw

for high speed.

• Make sure the shifter is in the low speed

position

• Press down on the foot pedal

maximum of 2¹/2 mph

. The vehicle goes forward at a

. Help your child practice steering to learn

• Before you disconnect the high speed lock-out, make sure your

child knows how to steer, how to start and stop the vehicle and

knows the rules for safe driving. When the high speed lock-out is

disconnected, the vehicle can be driven forward in low speed

(2¹/2 mph, maximum) or high speed (5 mph, maximum).

how far and how quickly to turn the steering wheel when driving

forward in low speed.

• Make sure the shifter is in the reverse

position.

To Back Up

• Loosen and remove the screw in the shifter box.

• Place the lock-out screw into the hole in the vehicle for future use. It

can be re-inserted into the shifter box to lock-out high speed.

To Drive

IMPORTANT! To avoid damaging the motors and gears, stop the

vehicle before shifting from forward to reverse.

• Once your child is completely comfortable with operating the vehicle

in the forward mode, introduce reverse

• Make sure the shifter is in the reverse

position

• Make sure the shifter is in the high speed

position

• Press down on the foot pedal

maximum of 2¹/2 mph

.The vehicle will go in reverse at a

. The vehicle is designed to operate in low

speed only in reverse. Help your child practice steering to learn how

far and how quickly to turn the steering wheel when driving

in reverse.

• Press down on the foot pedal

. The vehicle goes forward at a

. Help your child practice steering to learn

how far and how quickly to turn the steering wheel when driving

forward in high speed.

maximum of 5 mph

M0409pr-0920

Download from Www.Somanuals.com. All Manuals Search And Download.

FM RADIO USE

Volume

Power

Scan

Reset

Scan

Main Reset

Power/Volume

• Press the power button

to turn on or off.

• Turn the volume dial

to adjust to a comfortable listening level.

Hint: The FM Radio will turn off automatically after about one hour of non-use.

FM Radio

• Press the scan button

to find a station.

again to go to the next station.

• To reset the radio to the first station, press the scan reset button

• FM Radio reception varies from area to area. If the tuned station is lost due to poor reception, the radio automatically scans to the next

station with good reception.

Hint: Each time power is turned off and back on, the FM Radio will reset to the first station.

IMPORTANT! If the FM Radio functions erratically, press the main reset button with the point of a pen (or similar object).

M0409pr-0920

Download from Www.Somanuals.com. All Manuals Search And Download.

CHARGE INDICATOR

VEHICLE CARE

• Check all screws, cap nuts and their protective coverings regularly

and tighten as required. Check plastic parts on a regular basis for

cracks or broken pieces.

• During snowy or rainy weather, the vehicle should be stored inside

or under a protective cover. Remember to charge the battery at

least once per month while your vehicle is not in regular use.

• Avoid operating the vehicle in wet or snowy conditions, and do not

spray the vehicle with a hose. Do not wash the vehicle with soap

and water. Water or moisture in the motors or electrical switches

can cause them to corrode, and could cause switch or motor failure.

Button

• Avoid operating the vehicle on sand, loose dirt or gravel. Sand,

loose dirt or gravel in the motors or electrical switches can cause

them to jam, and could cause switch or motor failure.

12 VOLT BATTERY

CHARGE INDICATOR

• The vehicle can be wiped down with a soft, dry cloth. For a shiny

finish, you can wipe plastic parts with a non-wax furniture polish

applied to a soft-cloth. Do not use automotive wax. Do not use

soap and water or spray the vehicle with a hose.

• Press the 12 volt battery charge indicator button to check the power

level of your battery:

All four lights means the 12 volt battery is 100% (fully) charged.

Three lights means the 12 volt battery is 75% (mostly) charged.

• To ensure that your vehicle stays in good operating order, we

recommend that you periodically have your vehicle checked by a

Power Wheels^®authorized service center. For the location of the

authorized service center nearest you, please visit us on-line at

www.powerwheels.com or call 1-800-348-0751.

Two lights means the 12 volt battery is 50% charged. We

recommend recharging your battery for 14 hours.

One or no lights means the 12 volt battery needs charging. Fully

charge your battery for 14 hours.

Hint: For the most accurate reading, do not press the battery charge

indicator while the vehicle is moving.

M0409pr-0920

Download from Www.Somanuals.com. All Manuals Search And Download.

FCC NOTE

(United States Only)

LIMITED WARRANTY

Bumper-to-Bumper* Limited Warranty

Note: This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to Part 15 of the FCC

Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy

and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

*One year limited warranty from the date of

purchase on the Power Wheels^®vehicle.

Six month limited warranty on the 12 volt battery.

For the original purchaser, this one year limited warranty

covers the Power Wheels^®ride-on vehicle (purchased from

Power Wheels^®) against defects in materials and workmanship.

The six month limited warranty applies only to the 12 volt battery

included by Power Wheels^®with the original purchase of the

vehicle. This warranty covers normal use and does not cover the

Power Wheels^®vehicle or battery if damaged by unreasonable

use, neglect, accident, abuse, misuse, improper service or other

causes not arising out of defects in materials or workmanship.

Evidence of any attempt at consumer repair will void this

warranty. THIS WARRANTY DOES NOT COVER, AND IS

INTENDED TO EXCLUDE, ANY LIABILITY ON THE PART OF

POWER WHEELS^®, WHETHER UNDER THIS WARRANTY OR

IMPLIED BY LAW FOR ANY INDIRECT OR CONSEQUENTIAL

DAMAGES FOR BREACH OF WARRANTY. SOME STATES

DO NOT ALLOW THE EXCLUSION OR LIMITATION SO THIS

LIMITATION MAY NOT APPLY TO YOU.

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Consult the dealer or an experienced radio/TV technician for help.

Note: Changes or modifications not expressly approved by the

manufacturer responsible for compliance could void the user’s

authority to operate the equipment.

Should you need service or assistance with your vehicle during

the warranty period, do not return the vehicle to the store.

Power Wheels^®has provided a nationwide network of authorized

service centers. If there is not an authorized service center in

your area, please visit us on-line at www.powerwheels.com or

call Consumer Relations for information, 1-800-348-0751.

This warranty gives you specific legal rights, and you may also

have other rights which may vary from state to state.

PLEASE SAVE YOUR ORIGINAL SALES RECEIPT.

M0409pr-0920

Download from Www.Somanuals.com. All Manuals Search And Download.

PROBLEMS AND SOLUTIONS GUIDE

IMPORTANT! If you experience a problem with your vehicle, first check the Problems and Solutions Guide below. If you still experience a

problem, please contact Power Wheels^®Consumer Relations, toll-free at 1-800-348-0751 between 9 AM and 7 PM (EST) Monday through

Friday and 11 AM and 5 PM (EST) Saturday. Or, contact your local Power Wheels^®authorized service center. For the location nearest you,

please visit us on-line at www.powerwheels.com, or call 1-800-348-0751.

PROBLEM

POSSIBLE CAUSE

SOLUTION

Vehicle does not run

Undercharged battery

Charge the battery. A new battery should have been

charged for at least 18 hours before using the vehicle for

the first time. After first-time use, recharge the battery for

at least 14 hours after each use. Never charge the battery

longer than 30 hours.

Check all connectors. Make sure the charger is

tightly plugged into the battery, and that the

charger is plugged into the wall.

Make sure power flow to the wall outlet is “ON”.

Charger is not working

Tripped thermal fuse

There is no sure way to tell if your charger is working unless

you have a volt meter. If you suspect there is a problem with

your charger, contact your local Power Wheels^®authorized

service center. They can test your charger for you.

The built-in thermal fuse may "trip" and shut down operation

of the vehicle if the vehicle is overloaded or the driving

conditions too severe. Once a fuse has "tripped", remove

your foot from the pedal and wait approximately 25 seconds

before operating the vehicle again. To avoid repeated

automatic shutdowns, do not overload the vehicle by

exceeding the 130 lbs maximum weight capacity or by towing

anything behind the vehicle. Do not drive up hills or run into

fixed objects, which can cause the wheels to stop spinning

while power is still being supplied to the motors. If a thermal

fuse continually trips, contact your local Power Wheels^®

authorized service center.

Loose wires or loose connectors

Dead battery

Check all wires and connectors. Make sure the motor

harness connector is tightly plugged into the battery and that

there are no loose wires around the motors.

If your battery is old or if you have not followed Battery

Care instructions, your battery may be dead. If you are

unsure whether or not the battery are dead, you can have

it tested at your local Power Wheels^®authorized

service center.

Electrical switch damage

Motor damage

The electrical switches can become corroded due to

exposure to water or moisture, or can jam due to loose dirt,

sand or gravel. Contact your local Power Wheels^®authorized

service center for diagnosis and repair.

Contact your local Power Wheels^®authorized service center

for diagnosis and repair.

M0409pr-0920

Download from Www.Somanuals.com. All Manuals Search And Download.

PROBLEMS AND SOLUTIONS GUIDE

PROBLEM

POSSIBLE CAUSE

SOLUTION

Vehicle was running but

suddenly stopped

Loose wires or loose connectors

Check all wires and connectors. Make sure the

motor harness connector is tightly plugged into the battery,

and that there are no loose wires around the motors.

Tripped thermal fuse

The built-in thermal fuse may "trip" and shut down

operation of the vehicle if the vehicle is overloaded or the

driving conditions too severe. Once a fuse has "tripped",

remove your foot from the pedal and wait approximately

25 seconds before operating the vehicle again. To avoid

repeated automatic shutdowns, do not overload the vehicle

by exceeding the 130 lbs maximum weight capacity or by

towing anything behind the vehicle. Do not drive up hills or

run into fixed objects, which can cause the wheels to stop

spinning while power is still being supplied to the motors.

If a thermal fuse continually trips, contact your local

Power Wheels^®authorized service center.

Short run time (Less than

1 - 3 hours per charge)

Undercharged battery

Charge the battery. A new battery should have been

charged for at least 18 hours before using the vehicle for

the first time. After first-time use, recharge the battery for

at least 14 hours after each use. Never charge the

battery longer than 30 hours.

Check all wires and connectors. Make sure the motor

harness connector is tightly plugged into the battery, and

that the charger is plugged into the wall.

Make sure power flow to the wall outlet is “ON”.

Overcharged battery

Do not charge the battery longer than 30 hours. If you

suspect that your battery is damaged as a result of

overcharging, contact your local Power Wheels^®authorized

service center. They can test the battery for you.

Battery is old and will not

accept full charge

Even with proper care, a rechargeable battery does not

last forever. Average battery life is 1 to 3 years depending

on vehicle use and use conditions. Replace only with a

Power Wheels^®12 Volt Lead-Acid Rechargeable Battery.

Do not substitute parts.

Tripped thermal fuse

The built-in thermal fuse may "trip" and shut down

operation of the vehicle if the vehicle is overloaded or the

driving conditions too severe. Once a fuse has "tripped",

remove your foot from the pedal and wait approximately

25 seconds before operating the vehicle again. To avoid

repeated automatic shutdowns, do not overload the vehicle

by exceeding the 130 lbs maximum weight capacity or by

towing anything behind the vehicle. Do not drive up hills or

run into fixed objects, which can cause the wheels to stop

spinning while power is still being supplied to the motors.

If a thermal fuse continually trips, contact your local

Power Wheels^®authorized service center.

H4433pr-0920

M0409pr-0920

Download from Www.Somanuals.com. All Manuals Search And Download.

PROBLEMS AND SOLUTIONS GUIDE

PROBLEM

POSSIBLE CAUSE

SOLUTION

Vehicle runs in low speed, but

does not run in high speed

High speed lock-out not disconnected

The vehicle was pre-set to run only in low speed.

To allow the vehicle to run in low and high speed, you

must disconnect the High Speed Lock-Out. Follow the

instructions on page 26 to remove the High Speed

Lock-Out screw.

Please Note: The vehicle is

designed to operate in low

speed only in reverse

When the foot pedal is pressed

one rear wheel spins

Operation of vehicle in low speed

It is possible that only one rear wheel may spin when both only

rear wheels are raised off the ground and the vehicle is in

low speed. This does not necessarily indicate a problem.

Check for proper operation of the drive system by raising

the rear wheels off the ground and pressing the foot pedal.

If only one rear wheel spins, carefully press your hand on

the spinning wheel to slow it down. The other rear wheel

should begin to spin. If the other rear wheel does not begin

to spin, there may be a problem with the vehicle. Contact

your local Power Wheels^®authorized service center for

diagnosis and repair.

Vehicle runs sluggishly

Undercharged battery

Charge the battery. A new battery should have been

charged for at least 18 hours before using the vehicle for

the first time. After first-time use, recharge the battery for

at least 14 hours after each use. Never charge the battery

longer than 30 hours.

Check all connectors. Make sure the charger connector

is tightly plugged into the battery, and that the charger is

plugged into the wall.

Make sure power flow to the wall outlet is “ON”.

Be sure to charge the battery after each use.

Battery needs charging

Battery is old and will not

accept full charge

Even with proper care, a rechargeable battery does not

last forever. Average battery life is 1 to 3 years depending

on vehicle use and use conditions. Replace only with a

Power Wheels^®12 Volt Lead-Acid Rechargeable Battery.

Do not substitute parts.

Vehicle is overloaded

Make sure you do not overload the vehicle by allowing

more than two riders at one time, exceeding the 130 lbs.

maximum weight capacity, or by towing objects behind the

vehicle. If the vehicle is overloaded, the built-in thermal fuse in

the battery may "trip", and automatically shut down operation

for approximately 25 seconds. Adjust the driving conditions

to prevent repeated automatic shutdowns.

Driving conditions are too stressful

Use only on generally level ground.

M0409pr-0920

Download from Www.Somanuals.com. All Manuals Search And Download.

PROBLEMS AND SOLUTIONS GUIDE

PROBLEM

POSSIBLE CAUSE

SOLUTION

Sometimes the vehicle doesn’t

run, but other times it does

Loose wire or connector

Check all wires around the motors and all connectors to

make sure they are tight.

Motor or electrical switch damage

Loose wire or connector

“Dead Spot” on motor

Contact your local Power Wheels^®authorized service

center for diagnosis and repair.

When the foot pedal is pressed,

the vehicle won’t run without

a push

Check all wires around the motors and all connectors

to make sure they are tight.

Contact your local Power Wheels^®authorized service

center for diagnosis and repair.

Battery’s thermal fuse constantly

"trips", but the vehicle is not

overloaded nor the driving

conditions too severe

Damaged battery

Contact your local Power Wheels^®authorized service

center for diagnosis and repair.

Child is switching between

FORWARD and REVERSE

without stopping

Teach your child to stop the vehicle before switching

direction.

Loud clacking or grinding

noise from a motor-gearbox

Broken gears

Contact your local Power Wheels^®authorized service

center for diagnosis and repair.

Charger gets warm during use

It is normal for some chargers to get

warm during use and is not reason

for concern. Some chargers do not

get warm during use.

No action required.

If your charger does not get warm during

use, it does not mean that it is not working properly.

Battery makes a sizzling or

gurgling noise when charging

It is normal for some batteries to

make noise and swell slightly while

charging and is not reason for concern.

No action required.

If your battery does not make noise or swell slightly

during charging, it does not mean that it is

not accepting the charge.

H4433pr-0920

M0409pr-0920

Download from Www.Somanuals.com. All Manuals Search And Download.

PROBLEMS AND SOLUTIONS GUIDE

PROBLEM

POSSIBLE CAUSE

SOLUTION

FM Radio does not function

Power is off

Power automatically turns off after about one hour of non-use.

Press the power button

to turn it back on.

Batteries are weak or dead

Poor reception

Replace all four batteries with four, new "C" (LR14)

alkaline batteries.

FM Radio station

changes automatically

You may find better reception of a particular station in a

different location.

Power was turned off and the radio

reset back to the first station

Use the scan button to reset to your favorite station.

If, after reviewing the Problems and Solutions Guide, the vehicle still fails to operate, please contact your nearest authorized service center.

M0409pr-0920

Download from Www.Somanuals.com. All Manuals Search And Download.

H4433pr-0920

M0409pr-0920

Download from Www.Somanuals.com. All Manuals Search And Download.

Before first-time use,

you must charge the battery

18 hours!

Charge the battery immediately after each use.

Charge the battery once a month, even if the vehicle

is not used or stored.

Do not return

yourvehicle to the store!

Or contact your local independently owned and operated

Power Wheels^®Authorized Service Center.

For the location nearest you, visit us on-line at www.powerwheels.com.

Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, New York 14052 U.S.A.

Cadillac, the Wreath & Crest Emblem, Escalade, all related Emblems

and vehicle body designs are General Motors Trademarks used under

license to Fisher-Price.

PRINTED IN MEXICO

M0409pr-0920

Download from Www.Somanuals.com. All Manuals Search And Download.

PRINTED IN CHINA

73610a-0920

Eiki Projector EIP 3000NA User Manual
Eiki Projector LC NB1 User Manual
Electro Voice Speaker System FRX+181 User Manual
Fluke Modem 2635A RF900USB User Manual
Ford Automobile 2010 E 150 User Manual
Fostex Portable Speaker NX 6A User Manual
Fostex Power Supply X 34 User Manual
FujiFilm Digital Camera X M1 User Manual
Fujitsu Switch BX600 SB9 User Manual
GE Monogram Ice Maker ZDI15CWW User Manual