Fisher Price Motorized Toy Car K9758 User Manual

Please read this manual and save it with your

original sales receipt.

Tools needed for assembly: Phillips Screwdriver, Adjustable

Wrench (or Pliers) and Safety Scissors (all not included).

Use only with a Power Wheels^®12 Volt Lead Acid Rechargeable

Battery and Power Wheels^®12 Volt Charger

with Type 12V Connector (both included).

Requires four "C" (LR14) alkaline batteries

for FM Radio/Digital Clock operation (not included).

Product features may vary from the picture above.

Owner's Manual

with Assembly Instructions

For Model: K9758

4563

Download from Www.Somanuals.com. All Manuals Search And Download.

WARNINGS AND CAUTIONS

ELECTRICAL HAZARD

WARNING

• Battery can fall out and injure a child if vehicle tips over. Always use battery retainer.

• PREVENT FIRE

- Never modify the electrical system. Alterations could cause a fire resulting in serious injury

and could also ruin the electrical system.

- Use of the wrong type battery or charger could cause a fire or explosion resulting in

serious injury.

- Use of Power Wheels^®components in products other than Power Wheels^®vehicles could

cause overheating, fire or explosion.

• The battery must be handled by adults only. The battery is heavy and contains sulfuric acid

(electrolyte). Dropping the battery could result in serious injury.

• Never allow children to charge the battery. Battery charging must be done by adults only. A child

could be injured by the electricity involved in charging the battery.

• Read the safety instructions on the battery.

• Examine the battery, charger and their connectors for excessive wear or damage each time

you charge the battery. If damage or excessive wear is detected, do not use the charger or the

battery until you have replaced the worn or damaged part.

• HOT motors. Handle carefully.

RIDING HAZARD

WARNING

• Prevent Injuries and Deaths

• Direct Adult Supervision Required

• Never Ride at Night.

• Keep Children Within Safe Riding Areas.

These areas must be:

- away from swimming pools and other bodies of water to prevent drownings

- generally level to prevent tipovers

- away from steps, steep inclines, cars, roads and alleys.

• Riding Rules

Make sure children know and follow these rules for safe driving and riding.

- Always sit on the seat.

- Always wear shoes.

- Only 2 (two) riders at a time.

CAUTION

• In the unassembled state, this package contains small parts. Adult assembly is required.

• Use the charger in dry locations only.

K9758pr-0920

ꢁ

Download from Www.Somanuals.com. All Manuals Search And Download.

PARTS

• If you experience a problem with this product, or are missing a part, please call us at 1-800-348-0751, rather than return this product

to the store.

• Please identify all parts before assembly and save all packaging material until assembly is complete to ensure that no parts are discarded.

• Metal parts have been coated with a lubricant to protect them during shipment. Wipe all metal parts with a paper towel to remove any

excess lubricant.

Windshield

Backpack

Vehicle

Steering

Wheel

Cap

Hood

Sport Bar

Brush Guard

Backpack

Holder

Sport Bar Support - 2

Steering Wheel

Long Seat Belt Strap

Door Hinge - 2

(Left and Right)

Dash

Short Seat Belt Strap - 2

Steering Column

Door - 2

(Left and Right)

Seat

KK99775588pprr--00992200

ꢂ

Download from Www.Somanuals.com. All Manuals Search And Download.

TABLE OPFARCTOSNTENTS

#8 x 1" Screw – 6

12 Volt Battery

12 Volt Charger

#10 x ¾" Screw – 22

Taillight Lens Set

Taillight Housing Set

⁵/₃₂" x 1¹/₂" Pin - 1

Spacer - 2

Cap

#8-32 x 1.625" Screw – 2

#8 x4" Screw – 2

#8 x ⁵/₈" Screw – 1

#8 Acorn Lock Nut – 2

Lens Guard - 2

Headlight Lens - 2

#8 Lock Nut – 1

³/₈" Washer – 1

Light Cover – 2

Hood Latch – 2

For your convenience, we included extra fasteners!

Note: Tighten and loosen all screws with a Phillips screwdriver.

Do not over-tighten the screws.

Key Assembly

Part Not Shown: Label Sheet

Fasteners Shown Actual Size

K9758pr-0920

ꢃ

Download from Www.Somanuals.com. All Manuals Search And Download.

TABPLAERTOSF PCIOCNTUTRENETS

Note: Some parts shown are assembled on both sides of the vehicle.

Parts Not Shown

Vehicle

12 Headlight Lens - 2

23 Light Cover - 2

24 Door - 2

Steering Column 13 Lens Guard - 2

Hood Latch

#8 x 1" Screw - 6

#10 x ³/₄" Screw - 22

#8 Acorn Lock Nut - 2

#8 Lock Nut - 1

³/₈" Washer - 1

Label Sheet

14 Short Seat Belt Strap 25 Door Hinge - 2

15 Windshield

12 Volt Battery

26 Steering Wheel Cap

#8 x 4" Screw - 2

#8-32 x 1⁵/₈" Screw - 2

#8 x ⁵/₈" Screw - 1

12 Volt Charger 16 Brush Guard

Key Assembly

27 /₃₂" x 1¹/₂" Pin

Backpack

17 Steering Wheel

18 Seat

Taillight Lens

Backpack Holder

Taillight Housing 19 Long Seat Belt Strap

Hood

20 Spacer - 2

10 Cap

11 Dash

21 Sport Bar

22 Sport Bar Support - 2

K9758pr-0920

ꢄ

Download from Www.Somanuals.com. All Manuals Search And Download.

BATTERY CHARGING

ELECTRICAL HAZARD

CAUTION

WARNING

Use the charger in dry locations only.

• Battery can fall out and injure a child if

vehicle tips over. Always use battery retainer.

• PREVENT FIRE

About Thermal Fuses

Your Power Wheels^®12 volt battery is equipped with a built-in

thermal fuse. The thermal fuse is a self-resetting safety device which

automatically “trips” and shuts down operation of the vehicle if the

vehicle is overloaded or the driving conditions too severe. Once a fuse

has “tripped”, remove your foot from the pedal and wait approximately

25 seconds before operating the vehicle again. To avoid repeated

automatic shut-downs, do not overload the vehicle by exceeding the

130 lbs (59 kg) maximum weight capacity or by towing anything behind

the vehicle. Avoid severe driving conditions, such as driving up slopes

or running into fixed objects, which can cause the wheels to stop

spinning while power is still being supplied to the motors and make

sure your child stops the vehicle before switching direction.

- Never modify the electrical system.

Alterations could cause a fire resulting

in serious injury and could also ruin the

electrical system.

- Use of the wrong type battery or charger

could cause a fire or explosion resulting

in serious injury.

- Use of Power Wheels^®components in

products other than Power Wheels^®

vehicles could cause overheating, fire

or explosion.

If a thermal fuse in a battery continually trips under normal driving

conditions, please contact your local Power Wheels^®Authorized

Service Center. For the location of the Authorized Service Center

nearest to you, visit us on-line at www.powerwheels.com,

or call 1-800-348-0751.

• The battery must be handled by adults only.

The battery is heavy and contains sulfuric

acid (electrolyte). Dropping the battery

could result in serious injury.

Important Notes

• Your new battery must be charged for at least 18 hours before

you use it in your vehicle for the first time.

• Never allow children to charge the battery.

Battery charging must be done by adults

only. A child could be injured by the elec-

tricity involved in charging the battery.

• We recommend that you start charging your battery before beginning

assembly of your new vehicle.

• Read the safety instructions on the battery.

• The battery must be upright while charging.

• The charger is not a toy.

• Examine the battery, charger and their

connectors for excessive wear or damage

each time you charge the battery. If

damage or excessive wear is detected, do

not use the charger or the battery until you

have replaced the worn or damaged part.

• Do not short circuit the battery.

• You do not need to remove the battery from your vehicle to

recharge it.

• Before charging the battery, examine the battery case for cracks and

other damage which may cause sulfuric acid (electrolyte) to leak

during the charging process. If damage is detected, do not charge

the battery or use it in your vehicle. Battery acid is very corrosive and

can cause severe damage to surfaces it contacts.

• Do not charge the battery on a surface (such as a kitchen counter

top) which could be damaged by the acid contained inside the

battery. Take precautions to protect the surface on which you charge

your battery.

• Use only a Power Wheels^®12 volt charger with "12V" connector

(120 VAC, 60 Hz, 28W with an output of 12 VDC, 1200 mA) to

charge your Power Wheels^®12 volt battery.

Adults Note: Regularly examine the charger for damage to the

cord, plug, housing or other parts that may result in the risk of fire,

electric shock or injury. In the event of any damage, do not use

the charger until the damage has been properly repaired. Please

call 1-800-348-0751.

• If your battery is old and will not accept a charge, do not leave it in

the vehicle. Always remove a dead battery from the vehicle.

K9758pr-0920

ꢅ

Download from Www.Somanuals.com. All Manuals Search And Download.

BATTERY CHARGING

ASSEMBLY

WARNING

Children can be harmed by small parts,

sharp edges and sharp points in the

vehicle's unassembled state, or by electrical

items. Care should be taken in unpacking

and assembly of the vehicle. Children should

not handle parts, including the battery, or

help in assembly of the vehicle.

Dash

Charger

Connector

• Plug the charger connector into the battery A .

Motor

• Plug the charger into a standard wall outlet

Harness

Connector

Wire

Notes:

- If power flow to the wall outlet is controlled by a switch, make sure

the switch is “ON”.

- Use the charger only in a wall outlet. Do not plug the charger into

a ceiling outlet.

• Before first-time use, charge the battery for at least 18 hours.

Never charge the battery longer than 30 hours.

• Recharge the battery for at least 14 hours after each use of your

vehicle. Do not charge the battery longer than 30 hours.

• Once the battery is charged, disconnect the battery connector from

the charger connector. Unplug the charger from the wall outlet. The

battery is now ready to be installed in your vehicle. Please see the

Battery Installation section on page 18 for detailed instructions on

installing your battery. If your battery is already installed in your

vehicle, simply re-connect the motor harness connector to the battery.

• Position the dash on the vehicle.

• Make sure the motor harness connector wire is through the groove

in the dash.

• Insert five #10 x ¾ screws into the dash tabs and tighten.

K9758pr-0920

ꢆ

Download from Www.Somanuals.com. All Manuals Search And Download.

ASSEMBLY

Hole

Steering

Column

BOTTOM VIEW

• Wipe the steering column with a paper towel to remove any

excess lubricant.

DASH VIEW

• Turn the vehicle on its side.

• Before applying the labels, wipe the surface of the vehicle with

a clean, dry cloth to remove any dust or oils.

• Insert the straight end of the steering column up through the hole in

the vehicle frame and the vehicle floor and out through the hole in

the dash.

• Place the labels exactly as shown in the illustration.

• For best results, avoid repositioning a label once it has been applied

to the vehicle.

• While holding the steering column in place, turn the vehicle upright.

Tab UP

Steering

Column

Key Assembly

Dash

Steering

Wheel

Large Opening UP

SIDE VIEW

• Position the steering wheel so that the large opening and the tab on

the steering wheel stem are both UP.

• Insert and “snap” the key assembly into the opening in the dash,

as shown.

• Fit the steering wheel onto the steering column.

K9758pr-0920

ꢇ

Download from Www.Somanuals.com. All Manuals Search And Download.

ASSEMBLY

⁵/₃₂" x 1¹/₂" Pin

End of

Steering

Column

#8 x /₈Screw

End of

Steering

Column

#8 Lock Nut

• Insert the ⁵/₃₂" x 1¹/₂" pin through the hole in the end of the

steering column.

• Lower the steering column so that the pin fits inside the center of

the steering wheel.

• Insert a #8 x /₈screw through the hole in the end of the

steering column.

Steering

Wheel

Cap

• Fit a #8 lock nut on the end of the screw and tighten.

• While holding the lock nut with an adjustable wrench (or pliers),

tighten the screw.

• Turn the vehicle upright.

Lens Guard Wide Tab

• Fit the steering wheel cap into the center of the steering wheel.

• Insert two #8 x 1" screws and tighten.

End of

Steering

Column

Washer

Lens

Wide

Notch

Steering

Rod Hole

• Fit the wide notch in the side of a headlight lens under the wide tab

on a lens guard.

BOTTOM VIEW

• Press firmly on the inside of the headlight lens to snap it into the

lens guard.

• Turn the vehicle on its side.

• Insert the end of the steering column through the hole in the

steering rod.

• Repeat this procedure to assemble the other headlight lens to the

remaining lens guard.

• Place a /₈washer on the end of the steering column.

K9758pr-0920

Download from Www.Somanuals.com. All Manuals Search And Download.

ASSEMBLY

Slot

Grille

Tab

Hood

Slot

Tabs

Tab

Slot

FRONT VIEW

• Fit a lens assembly tab into the headlight slots in the grille.

• Press firmly to snap the lens assembly into the grille.

• Repeat this procedure to snap the other lens assembly into

the grille.

• Insert the tabs on the hood into the slots in the front end of

the vehicle.

• Pull the hood forward and lower it closed.

Hood

Latch

Windshield

Slot

Wipers

Large

Tab

Large

Tab

Large Slots

Hood

Latch

Slot

• Insert a hood latch into one of the slots in the vehicle, near

the hood area.

• Twist the base of the hood latch ¹/⁴turn to secure it in the vehicle.

• Position the windshield so that the molded detail on the wipers

face the front end of the vehicle.

• Repeat this procedure on the other side of the hood area to attach

the other hood latch to the vehicle.

• Insert and “snap” the two large tabs on the windshield into the

large slots in the dash.

• Pull up on the windshield to be sure it is secure.

K9758pr-0920

Download from Www.Somanuals.com. All Manuals Search And Download.

ASSEMBLY

Short Seat

Belt Strap

T-Loop (Pull through slot)

Fastener End

T-Loops

Slot

Seat

Slot

Brush Guard

• Turn the seat upside down.

• Insert the fastener end of a short seat belt strap through the slot

near the outer edge of the seat. Make sure the side of the seat belt

with the fastener faces the outer edge of the seat.

• Fit and hold the brush guard against the front end of the vehicle.

Hint: Using the end of a Phillips screwdriver, poke a hole in the thin,

plastic covering over the lower holes in the brush guard.

• Pull the short seat belt strap completely through the slot until the

last T-loop at the opposite end of the belt catches against the slot.

You will pull one T-loop through the slot.

• Insert two #10 x ¾" screws through the lower holes in the brush

guard and into the vehicle. Tighten the screws.

• Repeat this procedure to assemble the other short seat belt strap.

Spacers

Long Seat Belt Strap

T-Loop

Fastener End

• Insert each fastener end of the long seat belt strap through a slot in

the center of the seat. Make sure the fasteners face the outer edge

of the seat.

• Pull each side of the long seat belt strap evenly through the slots.

Make sure to pull each T-loop through a slot.

• Turn the seat upright.

#8 x 4"

Screws

• Fit two spacers between the upper holes of the brush guard and the

front end of the vehicle

• Insert two #8 x 4" screws through the upper holes in the brush guard,

through the spacers and into the front end of the vehicle

Tighten the screws.

K9758pr-0920

1ꢀ

Download from Www.Somanuals.com. All Manuals Search And Download.

ASSEMBLY

Seat

Backpack

Seat Back

Tabs

PUSH

HERE

Slot

Holder

SIDE VIEW

• With the seat at an angle, insert the tabs on the front edge of the

seat into the slots in the foot-well wall

• Using safety scissors, cut the plastic tie holding Backpack in the

holder. Remove Backpack from the holder.

• Push down firmly on the edge of the seat above each tab to snap

the tabs into the slots

Note to Retailer: Do not remove the plastic tie. Simply lift Backpack

from the holder and assemble the holder to the top edge of the

vehicle. Replace Backpack in the holder.

• Rotate the back of the seat down to snap the seat back tabs

into the slots in the vehicle. Push down firmly on the seat back.

• Fit the holder to the top edge of the vehicle as shown.

• Insert two #10 x ¾" screws into the holder. Tighten the screws.

BACK VIEW

• Insert a #10 x ¾" screw into the rear edge of the seat. Tighten

the screw.

K9758pr-0920

1ꢁ

Download from Www.Somanuals.com. All Manuals Search And Download.

ASSEMBLY

Sport Bar

Sport Bar Support

PUSH

HERE

Side

Fender

PULL

HERE

Supports

SIDE VIEW

• Fit the sport bar assembly into the holes in the top side of

the vehicle.

• Push down firmly on a sport bar support while pulling up on the side

fender to fit the sport bar into the vehicle.

• Fit a support to one side of the sport bar.

• Insert a #8- 32 x 1.625 screw through the support, the sport bar

and out through the support.

• Repeat this procedure on the other side of the vehicle.

• Fit an #8 acorn lock nut to the end of the screw.

• While holding the acorn lock nut with an adjustable wrench

(or pliers), tighten the screw.

• Repeat this procedure to fasten the other support to the sport bar.

Rear of

Vehicle

Light

Covers

BOTTOM VIEW

• Turn the vehicle on its side.

• Insert two #10 x " screws into the holes (behind the rear wheels)

in the underside of each rear wheel well, through the vehicle and

into the ends of the sport bar. Tighten the screws.

• Fit the light covers to the top of the sport bar, as shown.

¾"

• Insert a #10 x

screw into each light cover. Tighten the screws.

• Next, insert two, 10 x " screws into the holes (in front of the rear

wheels) in the underside of each wheel well, through the vehicle

and into the end of the sport bar. Tighten the screws.

K9758pr-0920

1ꢂ

Download from Www.Somanuals.com. All Manuals Search And Download.

ASSEMBLY

Taillight

Housing

Door

Taillight

Lens

#8 x 1" Screws

BACK VIEW

• Turn the vehicle upright.

• Using safety scissors, remove the taillight lenses and the taillight

housings from the plastic connectors. Dispose of the plastic

connectors.

• Face the rear of the vehicle.

SIDE VIEW

• Fit a taillight lens inside a taillight housing.

• Position the taillight housing with lens against the vehicle with the

screw holes aligned, as shown.

• Fit a door into the groove on the side of the dash.

• Insert two #8 x 1" screws through the taillight lens, housing and into

the vehicle as shown. Tighten the screws.

Hint: Each door is designed to fit one way. If the door does not fit,

try the other door.

• Repeat this procedure to attach the other taillight assembly.

Door

Hinge

Cap

Tether

• Position the cap so that the tether is down.

• Snap the cap into the hole under the right taillight.

• Fit a hinge over the top end of the door.

Hint: Each hinge is designed to fit one way. If the hinge does not fit,

try the other hinge.

• Insert three #10 x ¾" screws into the hinge and tighten.

• Repeat assembly steps 29 and 30 to assemble the other door

and hinge.

K9758pr-0920

1ꢃ

Download from Www.Somanuals.com. All Manuals Search And Download.

ASSEMBLY

DECORATION

• Before applying the labels, wipe the surface of the vehicle with

a clean, dry cloth to remove any dust or oils.

• Place the labels exactly as shown in the illustrations. For best

results, avoid repositioning a label once it has been applied to

the vehicle.

Loosen These

Screws

• After applying a label, rub the label firmly with a clean, dry cloth

to make sure the label is adhered to your vehicle. Start at the

center of a label, and smooth towards the outer edges to remove

air bubbles.

Battery

Compartment Door

JEEP® and the JEEP® grille design are registered trademarks

of DaimlerChrysler Corporation. JEEP® Wrangler® and its

trade dress are used under license from DaimlerChrysler.

©DaimlerChrysler Corporation 2006.

• Locate the FM Radio on the dash.

• Loosen both screws in the battery compartment door.

• Remove the battery compartment door.

• Insert four, new "C" (LR14) alkaline batteries.

Hint: We recommend using alkaline batteries for longer battery life.

• Replace the battery compartment door and tighten the screws.

• When sounds become faint or stop, it’s time for an adult to

changethe batteries! Please refer to page 22 for general information

and tips for use of the FM Radio.

• Protect the environment by not disposing of this product

with household waste (2002/96/EC). Check your local

authority for recycling advice and facilities (Europe only).

REAR VIEW

1.5V x 4

"C" (LR14)

Battery Safety Information

In exceptional circumstances, batteries may leak fluids that can cause

a chemical burn injury or ruin your product. To avoid battery leakage:

• Do not mix old and new batteries or batteries of different types:

alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium).

• Insert batteries as indicated inside the battery compartment.

• Remove batteries during long periods of non-use. Always remove

exhausted batteries from the product. Dispose of batteries safely. Do

not dispose of product in a fire. The batteries may explode or leak.

• Never short-circuit the battery terminals.

• Use only batteries of the same or equivalent type, as recommended.

• Do not charge non-rechargeable batteries.

• Remove rechargeable batteries from the product before charging.

INSIDE DASH VIEW

• If removable, rechargeable batteries are used, they are only to be

charged under adult supervision.

K9758pr-0920

1ꢄ

Download from Www.Somanuals.com. All Manuals Search And Download.

DECORATION

FRONT LEFT SIDE

FRONT RIGHT SIDE

K9758pr-0920

1ꢅ

Download from Www.Somanuals.com. All Manuals Search And Download.

BATTERY INSTALLATION

IMPORTANT! Use only a Power Wheels^®12 volt lead-acid

rechargeable battery. Use of any other battery will damage your

vehicle. Make sure that you charge the battery for at least 18

hours using the enclosed Power Wheels^®12 volt charger before

operating your vehicle for the first time. Charge the battery for at

least 14 hours after each use of the vehicle. Never charge the

battery longer than 30 hours. Failure to follow these instructions

may damage your battery and will void your warranty.

Motor Harness

Connector

Hood

Battery

Compartment

• Plug the motor harness connector into the battery.

Hood

Latches

• Turn the hood latches a ¹/₄turn.

• Lift the hood to access the battery compartment.

Power Wheels^®

12 Volt Battery

Battery Retainer

Hood Latches

• Lower the hood and secure the hood latches.

• Lift and pull the battery retainer forward.

• Place the battery in the battery compartment and release the

battery retainer.

K9758pr-0920

1ꢆ

Download from Www.Somanuals.com. All Manuals Search And Download.

BATTERY CARE AND DISPOSAL

Care

Disposal

If a battery leak develops, avoid contact with the leaking acid and

place the damaged battery in a plastic bag. See information below

for proper disposal.

• Your Power Wheels^®battery is a non-spillable, sealed lead-acid

battery. It must be recycled or disposed of in an environmentally

sound manner.

If acid comes in contact with skin or eyes, flush with cool water for

at least 15 minutes and call a physician.

• Do not dispose of a lead-acid battery in a fire. The battery may

explode or leak.

If acid is internally ingested, give water, milk of magnesia or egg

whites immediately. Never give emetics or induce vomiting. Call

a physician.

• Protect the environment by not disposing of this product with

household waste (2002/96/EC). Check your local authority for

recycling advice and facilities (Europe only).

• Charge a new battery for at least 18 hours before first use.

Never charge the battery longer than 30 hours. Overcharging or

undercharging the battery may shorten battery life and decrease

vehicle running time.

• Do not dispose of a lead-acid battery in your regular, household

trash. The incineration, landfilling or mixing of sealed lead-acid

batteries with household trash is prohibited by law in most areas.

• Return an exhausted battery to a federal or state approved lead-acid

battery recycler, such as a Power Wheels^®authorized service center

or a local seller of automotive batteries. For the authorized service

center location nearest to you, please visit us on-line at

• After the first charge, recharge the battery for at least 14 hours

after each use. Never charge the battery longer than 30 hours.

Charge the battery after each use, regardless of how long the

vehicle was used.

www.powerwheels.com or call 1-800-348-0751. Contact your

local waste management officials for other information regarding

the environmentally sound collection, recycling and disposal of

lead-acid batteries. If you live in the State of Florida or the State of

Minnesota, it is prohibited by law for anyone to throw away lead-acid

batteries in the municipal waste stream.

• The battery must be upright while charging.

• Do not allow the battery to run down completely before charging.

• Charge the battery before storing the vehicle.

• Charge the battery at least once per month, even if the vehicle has

not been used.

• Leaving the battery in a discharged condition will ruin it.

• Always remove an exhausted battery from the vehicle. Battery

leakage and corrosion can damage the vehicle.

• Do not store the battery on a surface (such as a kitchen counter

top) which could be damaged by the acid contained inside the

battery. Take precautions to protect the surface on which you store

the battery.

• Do not store the battery in temperatures above 75° F or below -10° F.

• Use only a Power Wheels^®12 volt battery. Remember to charge the

new battery for at least 18 hours before first use.

• Prevent the battery from moving freely inside the battery compart-

ment. Always use the battery retainer to secure the battery in

the battery compartment.

• Examine the battery, charger and their connectors for excessive

wear or damage each time you charge the battery. If damage is

detected, do not use the charger or the battery until you have

replaced the worn or damaged part.

K9758pr-0920

1ꢇ

Download from Www.Somanuals.com. All Manuals Search And Download.

SAFE DRIVING RULES

Teach Safety Rules to Children

RIDING HAZARD

While children can quickly develop the skill necessary to drive this

vehicle, it is important to remember that their judgment skills are still

very immature. Unsupervised driving by children can lead to serious

injury. Before children use this vehicle, an adult should carefully

evaluate the driving area as well as the children’s skill level and ability

to drive this vehicle safely. Children are not always able to recognize

or anticipate hazards, even when they have been taught about them.

There is no acceptable substitute for direct adult supervision.

WARNING

• Prevent Injuries and Deaths

• Direct Adult Supervision Required

• Never Ride at Night.

• Keep Children Within Safe Riding Areas.

These areas must be:

- away from swimming pools and other

bodies of water to prevent drownings

- generally level to prevent tipovers

- away from steps, steep inclines, cars,

roads and alleys.

Teach appropriate safety rules to your child before allowing operation

of this vehicle. These rules should also be reviewed with neighborhood

children or other playmates who want to drive this vehicle.

Riding Rules

Make sure children know and follow these rules for safe driving:

1. Always sit on the seat.

2. Always wear shoes.

• Riding Rules

3. Only 2 (two) riders at a time. A child who is not sitting on the seat or

who is standing on the vehicle could fall off, cause a tip-over or block

the driver’s view. A child could be seriously injured.

Make sure children know and follow

these rules for safe driving and riding.

- Always sit on the seat.

- Always wear shoes.

- Only 2 (two) riders at a time.

4. Do not allow any child to drive the vehicle in the street or near

moving (motorized) vehicles.

5. Do not allow any child to drive near bodies of water (such as pools

or creeks), obstructions (such as furniture, low tree limbs or play

equipment), or drop-offs (such as stairs or decks).

6. Do not allow any child to drive the vehicle in the dark. A child could

encounter unexpected obstacles and have an accident. Operate the

vehicle only in the daytime or a well-lit area.

7. Do not allow your child to drive on sloped or inclined surfaces.

Restrict your child’s driving to generally level ground ONLY!

8. Do not allow your child to drive down or across a steep slope.

- The vehicle may gain unsafe speed, even if the pedal is released

to stop.

- The vehicle may tilt and tip over.

- The wheels could lose traction, causing the vehicle to slip.

9. Do not allow your child to drive up steep inclines. The motor may

stop and the vehicle could roll backwards at an unsafe speed.

10. Never put anything near any moving parts. Rotating parts such as

motors, gear boxes and wheels can snag fingers, hair, etc., causing

serious injury. Do not allow operation of the vehicle when it is on its

side or in an upside-down position.

11. Do not operate the vehicle near flammable vapors (gasoline, paint

thinner, acetone, liquid wax, etc.). The vehicle’s electrical switches,

like most electrical switches, emit an internal spark when first turned

on or turned off. The presence of flammable liquids or vapors could

cause an explosion or a fire. Keep all flammable products in tightly

sealed containers and away from the vehicle.

12. Do not allow a child to operate the vehicle without direct adult

supervision. To prevent unsupervised use of the vehicle, disconnect

the motor harness from the battery when the vehicle is not in use.

K9758pr-0920

ꢀ0

Download from Www.Somanuals.com. All Manuals Search And Download.

VEHICLE OPERATION

IMPORTANT! Use this vehicle ONLY outdoors. Most interior floor-

ing can be damaged by riding this vehicle indoors. Fisher-Price^®

will not be responsible for damage to the floor if the vehicle is

used indoors.

Beginner Use - Low Speed Drive

• Your vehicle has a patented, electronic braking system that

automatically stops the vehicle when your child’s foot lifts from

the pedal. Make sure your child is comfortable with steering the

vehicle and automatically knows how to stop.

As assembled, your vehicle is ready to roll in low speed

(2¹/2 mph, maximum). It has been pre-set so it will only operate in

low speed. After your child has mastered the basic skills of driving

and understands the rules for safe driving, it’s time to remove the

high speed lock-out screw to allow the vehicle to operate in low or

high speed. See the instructions on this page to remove the

high speed lock-out screw.

Advanced Use - High Speed Drive

Shifter

Storage

Position

Lock-Out

Position

Lock-Out Screw

• Make sure the shifter is in the low speed

position

• Press down on the foot pedal

a maximum of 2¹/2 mph

. The vehicle goes forward at

. Help your child practice steering to

• Before you disconnect the high speed lock-out, make sure your

child knows how to steer, how to start and stop the vehicle and

knows the rules for safe driving. When the high speed lock-out is

disconnected, the vehicle can be driven forward in low speed

(2¹/2 mph, maximum) or high speed (5 mph, maximum).

learn how far and how quickly to turn the steering wheel when

driving forward in low speed.

• Make sure the shifter is in the reverse

position.

To Back Up

• Loosen and remove the screw in the shifter box.

• Replace the lock-out screw into the hole in the shifter for future

use. It can be re-inserted into the shifter box to lock-out high speed.

To Drive

IMPORTANT! To avoid damaging the motors and gears, stop the

vehicle before shifting from forward to reverse

• Once your child is completely comfortable with operating the vehicle

in the forward mode, introduce reverse

• Make sure the shifter is in the high speed

position

• Make sure the shifter is in the reverse

position

• Press down on the foot pedal

. The vehicle goes forward at

. Help your child practice steering to learn

how far and how quickly to turn the steering wheel when driving

forward in high speed.

• Press down on the foot pedal

.The vehicle will go in reverse at

a maximum of 5 mph

a maximum of 2¹/2 mph 3 . The vehicle is designed to operate in

low speed only in reverse. Help your child practice steering to learn

how far and how quickly to turn the steering wheel when driving

in reverse.

K9758pr-0920

ꢀ1

Download from Www.Somanuals.com. All Manuals Search And Download.

FM RADIO/DIGITAL CLOCK USE

FM Radio Station/

Time Display

Volume

Power

Scan

Reset

Scan

Minute

Adjust

Hour

Adjust

Main

Reset

Power/Volume

• Press the power button

• Turn the volume dial

to turn on or off.

to adjust to a comfortable listening level.

Hint: The FM Radio will turn off automatically after about one hour of non-use.

FM Radio

• Press the scan button

to find a station.

again to go to the next station.

• To reset the radio to the first station, press the scan reset button

• FM Radio reception varies from area to area. If the tuned station is lost due to

poor reception, the radio automatically scans to the next station with good reception.

Hint: Each time power is turned off and back on, the FM Radio will reset to the first station.

Setting the Digital Clock

• Press the power button

off.

• Press the hour adjust button

to set the hour.

• Press the minute adjust button

to set the minute.

Hint: Your child may accidentally hit the hour or minute adjust buttons and change the time on the clock. Simply use these buttons to reset to

the correct time!

IMPORTANT! If the FM Radio or Digital Clock function erratically, press the main reset button with the point of a pen (or similar object).

K9758pr-0920

ꢀꢀ

Download from Www.Somanuals.com. All Manuals Search And Download.

LIMITED WARRANTY

VEHICLE CARE

• Check all screws, cap nuts and their protective coverings regularly

and tighten as required. Check plastic parts on a regular basis for

cracks or broken pieces.

Bumper-to-Bumper* Limited Warranty

*One year limited warranty from the date of

purchase on the Power Wheels^®vehicle.

Six month limited warranty on the 12 volt battery.

• During snowy or rainy weather, the vehicle should be stored inside

or under a protective cover. Remember to charge the battery at

least once per month while your vehicle is not in regular use.

• Avoid operating the vehicle in wet or snowy conditions, and do not

spray the vehicle with a hose. Do not wash the vehicle with soap

and water. Water or moisture in the motors or electrical switches

can cause them to corrode, and could cause switch or motor failure.

For the original purchaser, this one year limited warranty

covers the Power Wheels^®ride-on vehicle (purchased from

Power Wheels^®) against defects in materials and workmanship.

The six month limited warranty applies only to the 12 volt battery

included by Power Wheels^®with the original purchase of the

vehicle. This warranty covers normal use and does not cover the

Power Wheels^®vehicle or battery if damaged by unreasonable

use, neglect, accident, abuse, misuse, improper service or other

causes not arising out of defects in materials or workmanship.

Evidence of any attempt at consumer repair will void this

warranty. THIS WARRANTY DOES NOT COVER, AND IS

INTENDED TO EXCLUDE, ANY LIABILITY ON THE PART OF

POWER WHEELS^®, WHETHER UNDER THIS WARRANTY OR

IMPLIED BY LAW FOR ANY INDIRECT OR CONSEQUENTIAL

DAMAGES FOR BREACH OF WARRANTY. SOME STATES

DO NOT ALLOW THE EXCLUSION OR LIMITATION SO THIS

LIMITATION MAY NOT APPLY TO YOU.

• Avoid operating the vehicle on sand, loose dirt or gravel. Sand,

loose dirt or gravel in the motors or electrical switches can cause

them to jam, and could cause switch or motor failure.

• The vehicle can be wiped down with a soft, dry cloth. For a shiny

finish, you can wipe plastic parts with a non-wax furniture polish

applied to a soft-cloth. Do not use automotive wax. Do not use soap

and water or spray the vehicle with a hose.

• To ensure that your vehicle stays in good operating order, we

recommend that you periodically have your vehicle checked by a

Power Wheels^®authorized service center. For the location of the

authorized service center nearest you, please visit us on-line at

www.powerwheels.com or call 1-800-348-0751.

Should you need service or assistance with your vehicle during

the warranty period, do not return the vehicle to the store.

Power Wheels^®has provided a nationwide network of authorized

service centers. If there is not an authorized service center in

your area, please visit us on-line at www.powerwheels.com or

call Consumer Relations for information, 1-800-348-0751.

FCC STATEMENT

United States Only

This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference by one or

more of the following measures:

This warranty gives you specific legal rights, and you may also

have other rights which may vary from state to state.

PLEASE SAVE YOUR ORIGINAL SALES RECEIPT.

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Consult the dealer or an experienced radio/TV technician for help.

Note: Changes or modifications not expressly approved by the

manufacturer responsible for compliance could void the user’s

authority to operate the equipment.

K9758pr-0920

ꢀꢁ

Download from Www.Somanuals.com. All Manuals Search And Download.

PROBLEMS AND SOLUTIONS GUIDE

IMPORTANT! If you experience a problem with your vehicle, first check the Problems and Solutions Guide below. If you still experience a

problem, please contact Power Wheels^®Consumer Relations, toll-free at 1-800-348-0751 between 9 AM - 7 PM (EST) Monday through Friday

or 11 AM - 5 PM (EST) Saturday. Or, contact your local Power Wheels^®authorized service center. For the location nearest you, please visit us

on-line at www.powerwheels.com, or call 1-800-348-0751.

PROBLEM

POSSIBLE CAUSE

SOLUTION

Vehicle does not run

Undercharged battery

Charge the battery. A new battery should have been charged for at

least 18 hours before using the vehicle for the first time. After first-

time use, recharge the battery for at least 14 hours after each use.

Never charge the battery longer than 30 hours.

Check all connectors. Make sure the charger connector is plugged

into the battery, and that the charger is plugged into the wall.

Make sure power flow to the wall outlet is “ON”.

Charger is not working

Tripped thermal fuse

There is no sure way to tell if your charger is working unless you

have a volt meter. If you suspect there is a problem with your

charger, contact your local Power Wheels^®authorized service

center. They can test your charger for you.

The built-in thermal fuse may “trip” and shut down operation of

the vehicle if the vehicle is overloaded or the driving conditions

too severe. Once a fuse has "tripped", remove your foot from the

pedal and wait 25 seconds before operating the vehicle again. To

avoid repeated automatic shutdowns, do not overload the vehicle

by exceeding the 130 lb. (59 kg) maximum weight capacity or by

towing anything behind the vehicle. Do not drive up hills or run

into fixed objects, which can cause the wheels to stop spinning

while power is still being supplied to the motors. If a thermal fuse

continually trips, contact your local Power Wheels^®authorized

service center.

Loose wire or loose connectors

Dead battery

Check all wires and connectors. Make sure the motor harness

connector is plugged into the battery, and that there are no loose

wires around the motors.

If your battery is old or if you have not followed Battery Care

instructions, your battery may be dead. If you are unsure whether

or not the battery is dead, you can have it tested at your local

Power Wheels^®authorized service center.

Electrical switch damage

The electrical switches can become corroded due to exposure to

water or moisture, or can jam due to loose dirt, sand or gravel.

Contact your local Power Wheels^®authorized service center for

diagnosis and repair.

Motor damage

Contact your local Power Wheels^®authorized service center for

diagnosis and repair.

Vehicle was running but

suddenly stopped

Loose wire or loose connectors

Check all wires and connectors. Make sure the motor harness

connector is plugged into the battery, and that there are no loose

wires around the motors.

Tripped thermal fuse

The built-in thermal fuse may "trip" and shut down operation of