B8776
Instructions
Please keep this instruction sheet for future reference, as it contains important information.
Adult assembly is required.
Tools required for assembly: Phillips Screwdriver, Hammer and Scrap Block of Wood (not included).
If you have any questions about this product, or are missing a part, please call us toll-free
at 1-800-432-5437, rather than return this product to the store.
We are available between 8 AM - 6 PM EST Monday through Friday.
Hearing-impaired consumers using TTY/TTD equipment, please call 1-800-382-7470.
Or write to: Fisher-Price® Consumer Relations, 636 Girard Avenue, East Aurora, N.Y. 14052.
Age: 2-5 years
Weight limit: 55 lbs (25 kg).
e
Download from Www.Somanuals.com. All Manuals Search And Download.
Tough Trike
Assembly
PUSH
Key
Seat
Straight Axle Assembly
Frame
3
Bottom View
1
• Turn the frame upside down.
• Insert the straight axle assembly through the holes in
the rear of the frame.
• Fit the seat onto the frame.
• Push firmly near the back end of the seat to "snap" it
into place.
• Insert and "snap" the key into the frame.
Hint: You may need to tap the key with a hammer to
secure it in place.
Bushing
Wheel
(Grooved Side Down)
(Flat Side First)
Rear
Wheel
Straight Axle
(Indented
Side Down)
Bushing
Wheel Hub
(Smooth Side First)
(Flat Side Down)
Wheel Hub
4
(Pointed End First)
• Turn the assembly upright.
• Slide a bushing, smooth side first, onto the end of the
straight axle.
• Slide a wheel, flat side first, onto the end of the
straight axle.
• Slide a wheel hub, pointed end first, onto the end of
Straight
Axle
Straight
Axle
the straight axle.
Cap Nut
2
• Place one end of the straight axle into the cap nut.
Tap the end of the straight axle with a hammer.
Make sure the cap nut is securely attached to the
straight axle.
• Slide a wheel hub, flat side down, onto the straight axle.
• Slide a rear wheel, indented side down, onto the
straight axle.
• Slide a bushing, grooved side down, onto the
straight axle.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Assembly
Pedal Hub
Pedal Axle Tab
Pedal Axle Tab
Pedal Hub
7
• Fit two pedal hubs onto the pedal axle tabs. Make sure
the tabs fit into the slot in each pedal hub.
Front Wheel Hole
5
• Fit the cap nut on the end of the straight axle.
• Tap the cap nut with a hammer. Gently pull the rear
wheel to be sure the cap nut is securely attached
to the straight axle.
Hint: You may need the help of another adult to hold
the other end of the straight axle in place.
8
• While holding the pedal hubs
on the pedal axle, insert the
pedal axle into the hole in the
center of the front wheel.
• Press the pedal hubs into the center of the front wheel
until they are flush with the surface of the front wheel.
Wheel Hub
9
Wheel Cap
6
• Turn the front wheel
assembly over.
• Fit the tabs on the wheel cap into the slots in the
wheel hub. Push to "snap" the wheel cap in place.
• Repeat this procedure to attach the other wheel cap to
the other wheel hub.
• Insert the remaining pedal
hubs on top of and below the pedal axle and into the
hole in the center of the front wheel.
• Press the pedal hubs until they are flush with the
surface of the front wheel.
PRINTED IN MEXICO
B8776pr-0920
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Assembly
Fork Post
Pedal
Pedal Axle
Front Wheel
Assembly
Scrap Block
of Wood
10
Fork Cover
12
• Place a scrap block of wood under the front
wheel assembly.
• Fit a pedal on the pedal axle. Tap the pedal with a
hammer until it is secure.
• Insert the fork post up through the hole in the neck of
the frame. Make sure the fork is positioned so that the
fork covers face the rear wheels.
• Pull the pedal up to be sure it is secure. If you can
remove it, you have not secured it properly. Tap it with
the hammer again.
• Repeat this procedure to attach the other pedal to the
other end of the pedal axle.
Fork Post
Handlebar Front
Handlebar Back
Fork Arms
3
4
/ " Screw
3
4
/ " Screw
Front Wheel
Assembly
1
4
2 / " Screw
Groove
Fork Cover
13
Pedal Axle
11
• Fit the handlebar front to the fork post.
Hint: The handlebar front is designed to assemble to the
fork post one way.
• Fit the handlebar back to the fork post and handlebar
front. Hold them together firmly.
• First, insert the remaining #8 x / " screws through the
outer holes in the handlebar back and tighten.
• Then, insert the #8 x 2 / " screw through the center
hole in the handlebar back and tighten.
• Place the front wheel assembly between the fork arms.
Make sure the pedal axle fits into the groove at the
bottom of each fork arm.
• Place a fork cover over the pedal axle on one fork arm.
3
4
3
4
• Insert two #8 x / " screws into the fork cover
and tighten.
1
4
• Repeat this procedure to attach the other fork cover
to the other fork arm.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Care
Label Decoration
• Periodically, check the plastic parts and if broken or
cracked, dispose of them properly.
• Periodically, check all fasteners regularly to be sure
they are tight. If the fasteners are not tight, tighten them
as necessary.
• To clean, use a mild soap and water solution and a clean
cloth. Rinse clean with water to remove soap residue.
IMPORTANT! It is a good practice to start training
children very young regarding the importance of helmet
use. When children are older and riding bicycles and
faster vehicles, it is important that they use a helmet
each and every time they ride. For this reason, even
while riding a tricycle, it is a good idea to familiarize
your child with helmet use, so that it becomes a habit
for life. Choose a helmet that complies with requirements
of the applicable certifying agency for bicycle helmets.
1
6
5
Right Side
4
3
2
For other countries outside the United States:
Canada: call 1-800-567-7724, or write to: Mattel Canada Inc., 6155 Freemont
Blvd., Mississauga, Ontario L5R 3W2.
Great Britain: telephone 01628 500302.
Australia: Mattel Australia Pty. Ltd., 658 Church Street, Locked Bag #870,
Richmond, Victoria 3121 Australia. Consumer Advisory Service 1300 135 312.
New Zealand: 16-18 William Pickering Drive, Albany 1331, Auckland.
1
Asia: Mattel East Asia Ltd, Room 1106, South Tower, World Finance Centre,
Harbour City, Tsimshatsui, HK, China.
Left Side
Proper label application will help to keep the labels
looking their best!
• Wash your hands before applying the labels.
• Make sure the areas where the labels will be applied
are clean and dry. Wipe your vehicle with a clean, soft,
dry cloth to remove any dust or oils.
• For best results, avoid applying a label more
than once.
• Apply the labels as shown in the illustration above.
• After applying a label, rub the label firmly with a cloth
to make sure the label is adhered to your vehicle.
Assembly is complete.
BARBIE is a U.S. trademark of Mattel, Inc.
Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A.
©2003 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
|