Fender Stereo Amplifier PR 290 User Manual

T H E S O U N D T H A T C R E A T E S L E G E N D S  
Princeton  
Plus  
112  
Type: PR 290  
,
Owners Manual  
P/N 048524  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Princeton 112 Plus Front Panel Functions  
A. INPUT - A high impedance, high sensitivity plug-in  
M. REVERB - Adjusts the amount of reverb signal mixed  
connection for instruments.  
with the original dry signal for both the Normal and Drive  
Channels.  
B. VOLUME - Adjusts the overall loudness of the Normal  
Channel.  
N. FOOTSWITCH - Plug in connection for the optional  
footswitch to select between the Normal and Drive  
Channels and to switch the Reverb on and off. For  
proper operation of the footswitch, the DRIVE SELECT  
switch (item K) should be out. NOTE: Any good quality  
patch cable will work with the remote footswitch,  
however, a speaker grade cord is preferable to a coax  
guitar cable if it is availability.  
C. NORMAL CHANNEL INDICATOR - This LED is  
illuminated when the Normal Channel is active.  
D. TREBLE - Adjusts the amount of boost or cut in the  
high frequency range of the Normal Channel.  
E. BASS - Adjusts the amount of boost or cut in the low  
frequency range of the Normal Channel.  
O. PREAMP OUT - This jack provides an unbalanced  
output signal from the preamp and can be used in  
conjunction with the POWER AMP IN jack (item P) as a  
patch point for effects units (i.e. as an effects loop). This  
signal can also be used to feed recording and sound  
reinforcement mixers. Additionally it can drive another  
amplifier as a slave by connecting a standard guitar  
cable from the PREAMP OUT jack of the master  
amplifier to the POWER AMP IN jack of the slave.  
F. GAIN - Adjusts the amount of preamp amplification in the  
Drive Channel. Cleaner sound is achieved at lower gain  
settings; high gain settings will produce more sustain  
and distortion. This control works in conjunction with  
the DRIVE VOLUME control (item L) to set the overall  
loudness of the Drive Channel.  
G. DRIVE CHANNEL INDICATOR -This LED is illuminated  
when the Drive Channel is active.  
P. POWER AMP IN - This unbalanced jack inputs signal  
directly to the power amp. It automatically disconnects  
the preamp signal when used. This is useful when using  
the effects loop option or when using the PRINCETON  
112 Plus as a slave amplifier.  
H. CONTOUR - Adjusts the overall tone quality of the Drive  
Channel without affecting the signal level. Low  
CONTOUR settings will provide emphasis in the  
midrange frequencies whereas a higher setting will  
notch the midrange to produce sounds characteristics  
of most “metal” music.  
Q. HEADPHONES - This jack provides an output to  
standard stereo or mono headphones for private  
listening. NOTE: Use of this jack automatically  
disables the main speaker. CAUTION: Prolonged  
listening at high levels may be hazardous to your  
hearing! This jack can also be used as an unbalanced  
line output, which is post effects loop, by using either a  
stereo or mono 1/4 inch phone plug connection.  
I. TREBLE - Adjusts the amount of boost or cut in the  
high frequency range of the Drive Channel.  
J. BASS - Adjusts the amount of boost or cut in the low  
frequency range of the Drive Channel.  
K. DRIVE SELECT - Activates the Drive Channel. NOTE:  
This switch disables the optional Channel Select  
Footswitch and the Normal Channel controls.  
R. POWER SWITCH - This switch turns the AC power ON  
and OFF. When the switch is OFF the amplifier is  
completely shut down.  
L. VOLUME - Adjusts the overall loudness of the Drive  
LINE CORD - This amplifier is equipped with a  
grounding type supply cord to reduce the possibility of  
shock hazard. Be sure to connect it to a grounded  
receptacle. DO NOT ALTER THE AC PLUG.  
Channel.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Princeton 112 Plus Specifications  
PART NUMBER:  
120V VERSION: 22-6704  
230V VERSION: 22-6764  
INPUT IMPEDANCE:  
NOMINAL INPUT LEVEL:  
POWER OUTPUT:  
Greater than 1 M  
100 mv  
65 Watts R. M.S.  
RATED LOAD IMPEDANCE: 8Ω  
EFFECTS LOOP: Nominal Level- -10 dBV  
Output Impedance- 1k.Ω  
Input Impedance 16kΩ  
POWER REQUIREMENTS: 100V VERSION: 100V AC 50/60 Hz., 180W  
120V VERSION: 120V AC 60 Hz., 180W  
230V VERSION: 230V AC 50 Hz., 180W  
240V VERSION: 240V AC 50 Hz., 180W  
SPEAKER COMPLEMENT: One 8Special Design 12” Speaker (P/N 025923)  
DIMENSIONS:  
Height: 16-1/2” (41.9cm)  
Width: 18-5/8” (47.3cm)  
Depth: 9” (22.9cm)  
WEIGHT:  
28 lbs. (12.7kg)  
ACCESSORIES:  
Remote Dual Footswitch - order Fender P/N 002-8122-000  
Amplifier Cover - order Fender P/N 002-9883-000  
WARNING:  
NO USER SERVICEABLE PARTS INSIDE,  
REFER SERVICING TO QUALIFIED  
PERSONNEL ONLY.  
DO NOT EXPOSE THIS EQUIPMENT  
TO RAIN OR MOISTURE.  
THIS EQUIPMENT MUST BE EARTHED.  
A PRODUCT OF:  
FENDER MUSICAL INSTRUMENTS CORP.,  
CORONA, CA 9 1 7 2 0  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Fisher Paykel Ventilation Hood OB60N8DTX User Manual
Fisher Price Baby Toy 77806 User Manual
Flymo Trimmer 5119748 03 User Manual
FujiFilm Digital Camera 16315990 User Manual
Fujitsu Air Conditioner AOVG09LLCA User Manual
Fundex Games Games 07800016 User Manual
Fundex Games Games Timber Tumble User Manual
GE Coffeemaker 169184 User Manual
GE Washer Dryer WPRB9220 User Manual
Global Upholstery Co Patio Furniture 3356 User Manual