Fellowes Paper Shredder SB 125Ci User Manual

WARRANTY  
Our promise to you is quite simple. Fellowes shredders are built stronger, engineered to run longer, during the warranty period, your sole and exclusive remedy will be repair or replacement, at Fellowes’  
resist jams and power through large jobs. The Fellowes worry free warranty described below covers option and expense, of the defective part. This warranty does not apply in cases of abuse, mishandling,  
the performance of the product, provides for prompt service and support, plus a lifetime cutter or unauthorized repair. ANY IMPLIED WARRANTY, INCLUDING THAT OF MERCHANTABILITY OR FITNESS  
warranty.  
FOR A PARTICULAR PURPOSE, IS HEREBY LIMITED IN DURATION TO THE APPROPRIATE WARRANTY  
PERIOD SET FORTH ABOVE. In no event shall Fellowes be liable for any consequential or incidental  
Limited Warranty: Fellowes, Inc. (“Fellowes”) warrants the parts of the machine to be free of defects damages attributable to this product. This warranty gives you specific legal rights. The duration, terms,  
in material and workmanship and provides service and support for 3 years from the date of purchase and conditions of this warranty are valid worldwide, except where different limitations, restrictions,  
by the original consumer. Fellowes warrants the cutting blades of the machine to be free from defects or conditions may be required by local law. For more details or to obtain service under this warranty,  
in material and workmanship for the lifetime of the shredder. If any part is found to be defective please contact us or your dealer.  
Help Line  
Australia  
Canada  
Europe  
00-800-1810-1810  
+1-800-234-1185  
+1-800-955-0959  
+1-800-33-11-77  
+1-800-665-4339  
Mexico  
United States  
1789 Norwood Avenue, Itasca, Illinois 60143-1095 • USA• 630-893-1600  
France  
Germany  
Spain  
Italy  
Japan  
Australia  
Korea  
Benelux  
Poland  
Canada  
Russia  
China  
Singapore  
South Africa  
United Kingdom United States  
2010 Fellowes, Inc. Part No. 404032  
Download from Www.Somanuals.com. All Manuals Search And Download.  
I.  
G.  
K.  
ENGLISH  
A.  
B.  
C.  
Model SB-125i/SB-125Ci  
KEY  
D.  
J.  
®
A. SafeSense Technology H. Casters (2)  
K. Control Panel and LEDs  
1. Reverse  
E.  
F.  
B. Paper entry  
C. CD entry  
D. Door  
I. Disconnect power switch  
6. Remove paper  
7. Overheat  
8. Sheet capacity indicator  
J. Shipping bolts (wing nuts)  
2. ON/OFF  
3. Forward  
To be removed prior to operation  
®
E. Basket (paper)  
F. Basket (CD)  
G. See safety instructions  
4. Bin full  
5. Door open  
9. SafeSense indicator (yellow)  
10. Auto button  
H.  
CAPABILITIES  
Will shred: Paper, credit cards, CD/DVD’s, staples and small paper clips  
Maximum:  
Sheets per pass .............................................................................................................................18*  
CDs/Cards per pass .........................................................................................................................1*  
Paper entry width....................................................................................................9 inches (230mm)  
Will not shred: Adhesive labels, continuous form paper, transparencies, newspaper, cardboard, large  
paper clips, e folders, X-rays or plastic other than noted above  
Paper shred size:  
*8.5 inches x11 inches, 20lb., (75g) paper at 120V, 60 Hz, C-125i 6Amps, C-125Ci 8Amps; heavier paper,  
humidity or other than rated voltage may reduce capacity. Recommended daily usage rates:  
100-150 paper passes; 100 cards; 10 CDs  
Cross-Cut...................................................................... 5/32 inches x 1-1/2 inches (3.9mm x 38mm)  
Strip Cut.............................................................................................................7/32 inches (5.8mm)  
Fellowes SafeSense® shredders are designed to be operated in office environments ranging  
between 50 – 80 degrees Fahrenheit (10 – 26 degrees Celsius) and 40 – 80% relative humidity.  
ADvANCED PRODUCT FEATURES  
INSTALLATION INSTRUCTIONS  
1. Place shredder against the wall (drywall, wooden,  
or concrete). Mark screw locations on wall  
through back of cabinet.  
Jam Proof System  
Eliminates frustrating jams by preventing  
overloads and powering through misfed paper  
2. Drill 1/4" hole in wall for the anchor plugs.  
3. Insert white plastic anchor plugs into  
drilled holes.  
4. Insert (2) screws through back of cabinet and  
thread black rubber spacer onto the screw.  
5. From inside cabinet use Phillips screw driver to  
secure shredder to the wall.  
Patented SafeSense® Technology  
Stops shredder immediately when hands  
are too close to the paper entry  
Sleep Mode  
Energy saving feature shuts down automatically  
after 2 minutes of no shredding activity  
IMPORTANT SAFETY INSTRUCTIONS — Read Before Using!  
Keep away from children and pets. Keep hands away from paper entry. Always  
This shredder has a Disconnect Power Switch (I) that must be in the ON (I) position to  
operate shredder. In case of emergency, move switch to OFF (O) position. This action will  
stop shredder immediately.  
Avoid touching exposed cutting blades under shredder head.  
Keep finger away from CD hole when shredding.  
Do not put foreign objects in paper entry.  
The grounded socket-outlet shall be installed near the equipment and shall be  
easily accessible.  
WARNING: Shredder Stability - Secure Shredder to wall with hardware provided  
following the instructions under Installation Instructions.  
set to off or unplug when not in use.  
Keep foreign objects – gloves, jewelry, clothing, hair, etc. – away  
from shredder openings. If object enters top opening, switch to  
Reverse ( ) to back out object.  
Never use aerosol products, petroleum based lubricants or other flammable products  
on or near shredder. Do not use canned air on shredder.  
Do not use if damaged or defective. Do not disassemble shredder. Do not place  
near or over heat source or water.  
Product is intended for commercial use only, and not for use around children.  
BASIC SHREDDING OPERATION  
PAPER/CARD OR CD  
4
5
2
6
1
3
7
AUTO  
AUTO  
Continuous operation:  
Press ( ) ON to activate  
When finished  
Plug in and put disconnect  
45 minutes maximum  
Feed paper/card straight  
into paper entry and  
release  
To shred CDs rotate  
CD flap into place  
Hold CD at edge,  
feed into CD  
entry and release  
Do nothing and  
power switch in ON  
shredding set to  
shredder will go  
automatically to sleep  
mode  
or  
NOTE: Continuous operation  
beyond 45 minutes will trigger  
45 minute cool down period.  
(I) position  
OFF (  
)
www.fellowes.com features an extensive on-line support section with a number of self-service options  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
JAM PROOF SYSTEM OPERATION*  
Eliminates frustrating jams by preventing overloads and powering through misfed paper.  
Advanced Jam Prevention- Electronically  
measures paper thickness to prevent paper jams:  
1
2
3
Up to RED: Too many  
sheets have been inserted.  
Remove several sheets until  
indicator is below red.  
Continue 100% Jam  
Proof Shredding  
Up to YELLOW: Productivity  
is optimized.  
Up to GREEN: More sheets  
can be added.  
If  
illuminates after paper has been  
If a misfeed  
occurs:  
All indicators light up and  
shredder pauses for 3-6 seconds  
Wait for flashing to stop after automatic correction  
is complete. Regular shredding will resume.  
reversed, press reverse and remove paper.  
Otherwise, regular shredding will resume.  
*100% Jam Proof when used in accordance with user manual  
SLEEP MODE  
SAFESENSE® TECHNOLOGY OPERATION  
WHEN IN SLEEP MODE  
SET-UP AND TESTING  
1
2
3
2
3
4
1
AUTO  
AUTO  
®
®
To get out of sleep mode  
touch control panel  
In sleep mode  
or  
insert paper  
Turn the shredder ON  
Touch test area and  
SafeSense is active and  
working properly  
If hand is held on SafeSense  
area more than 2 seconds  
shredder will shut off  
®
®
(
) to activate SafeSense  
look for the SafeSense  
indicator to illuminate  
BASIC PRODUCT MAINTENANCE AND TROUBLESHOOTING  
OILING SHREDDER  
CLEANING AUTO-START INFRARED SENSORS  
All cross-cut shredders require oil for peak performance. If not oiled, a  
machine may experience diminished sheet capacity, intrusive noise when  
shredding and could ultimately stop running. To avoid these problems, we  
recommend you oil your shredder each time you empty your waste bin.  
Paper detection sensors are designed for maintenance free operation. However, on rare occasions the sensors  
may become blocked by paper dust causing the motor to run even if there is no paper present  
(Note: two paper detection sensors are located in the center of the paper entry).  
FOLLOW OILING PROCEDURE BELOW AND REPEAT TWICE  
TO CLEAN THE SENSORS  
1
2
3
1
2
4
3
AUTO  
AUTO  
Press and hold forward  
) 2-3 seconds  
*Apply oil across entry  
Shred one sheet  
Turn off and unplug  
shredder  
Locate Auto-start  
infared sensor  
Dip cotton swab in  
rubbing alcohol  
Using cotton swab, wipe  
away any contamination  
from the paper sensors  
(
*Only use a non-aerosol vegetable oil in long nozzle container such as Fellowes 35250  
PREvENTIvE MAINTENANCE AND MISCELLANEOUS TROUBLESHOOTING  
• Self Cleaning Cycle: Shredder periodically cycles in forward and reverse lasting 3-6 seconds (SB-125Ci).  
• Empty wastebasket when bin full indicator lights up.  
• Shredder won’t run if the door is open, or bin needs to be emptied.  
• Maintenance is an important part of protecting your investment. Don’t forget our oil (35250) and shredder bags (36054).  
• When shredding for a prolonged period of time, the motor can become warm and require a cool down period. When this occurs the overheat indicator will alert you to the problem.  
This model will require 45 minutes to cool down.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  

Eiki Projector 3990BDA User Manual
Fender Musical Toy Instrument PM 1 Deluxe User Manual
FieldServer Computer Drive FS 8700 105 User Manual
FilterStream Vacuum Cleaner V2210 User Manual
Fisher Price Car Seat 79700 User Manual
Frymaster Fryer PF50R User Manual
GE Fax Machine UX CL 220 User Manual
Gefen Switch GTV HDMI13 441N User Manual
Global Machinery Company Air Compressor EAC30 User Manual
Global Machinery Company Planer BFPCF User Manual