Fellowes Paper Shredder DM65C User Manual

PAPER SHREDDER  
Personal Series  
MODELS  
DM65C  
PRODUCT USAGE GUIDE  
DM65C  
7
Confetti  
Sheet capacity*:  
Shred type:  
Shred size:  
Entry width:  
5/ 32" x 1-3/ 8"  
9"  
Recommended use:  
Maximum running time:  
25-50 shredding passes per day  
10-12 min. on/ 20 minutes off  
*Sheet capacity measured with 20 lb., 8-1/ 2" x 11" paper with the shredder operating at rated voltage. Different paper weights, humidity, and  
electrical currents will affect capacity.  
PLEASE READ AND SAVE THIS MANUAL WITH YOUR ORIGINAL RECEIPT  
Customer Service: 1-800-955-0959  
Download from Www.Somanuals.com. All Manuals Search And Download.  
the shredder's red LED will light and the shredder will automatically  
stop until the jam is cleared.  
To clear a jam:  
OPERATION  
This product features an auto-start sensor. This  
sensor will turn on the cutting blades whenever  
1. Move the power switch to the REVERSE (R) position. (NOTE: If  
waste basket is full, empty it before clearing jam.) The shredder  
will reverse the paper to clear the jam.  
2. If the shredder jams in reverse, move the power switch to AUTO  
(I) and allow to run for about five seconds. If jam does not clear,  
move power switch to REVERSE (R) again and allow to run for  
about five seconds. Repeat this procedure until the jam is  
cleared. If necessary, use care to grasp the paper carefully and  
pull out to clear the jam.  
anything is inserted into the paper entry (while the power switch is in  
the AUTO position). For the safety of pets and children, we recom-  
mend always moving the power switch to OFF and unplugging when-  
ever the shredder is unattended or not in use.  
1. Assemble shredder (see "ASSEMBLY").  
2. Remove any large paper clips or other foreign objects (except sta-  
ples and small paper clips) from paper. If folding paper to fit paper  
entry, adjust sheet capacity appropriately.  
Do not attempt to shred large paper clips or other  
hard materials (except staples and small paper  
3. Once the jam is cleared, move the power switch to AUTO (I) for  
continued shredding or OFF (O) if shredding is complete.  
clips) with this machine. Extensive use of large paper clips or other hard  
materials will result in damage to the cutting system and will void the  
manufacturer's warranty.  
MAINTENANCE  
3. Be sure power switch is in OFF (O) position. Plug shredder into  
proper power supply outlet.  
4. Move power switch to AUTO (I) position.  
Confetti-cut shredders require regular (monthly) oiling of the cutting  
blades to maintain proper operation. Failure to oil the blades regular-  
ly could result in reduced sheet capacity performance, excessive noise  
during operation, paper jams and possibly shredder failure.  
We recommend using only Powershred Lubricant #35250 (available  
by contacting Fellowes) or a vegetable-based oil (such as corn or  
canola) in a non-aerosol container with an extension nozzle.  
When the unit is turned on and in standby mode (green LED  
lights), the shredder is ready to be fed paper through the paper  
entry. (See "TROUBLESHOOTING" if red LED is lit.)  
NEVER insert hands or fingers into  
paper entry as serious personal injury may result.  
Never use flammable synthetic oil, petroleum-  
based, or aerosol lubricants to oil the cutting  
blades. Some agents may combust, causing serious injury.  
Do not exceed recommended sheet capacity  
(see "Product Usage Guide" on front cover of this  
manual).  
To oil the cutting blades:  
1. From the top of the shredder, squeeze the recommended lubri-  
cant across the full width of the blades.  
2. Move the power switch to AUTO (I) position and allow the blades  
to run at least 3 seconds.  
3. Move the power switch to REVERSE (R) position and allow it to run  
for at least 3 seconds.  
5. Slide paper straight into paper entry until the shredder automatical-  
ly begins shredding. The shredder automatically stops a few sec-  
onds after shredding is complete. Continue shredding as desired to  
a MAXIMUM shredding time of 10-12 minutes. At this time, the  
machine MUST be allowed to "cool down" for a MINIMUM of 20  
minutes. (See "Cool-Down Cycle" for more information.)  
If the shredder jams or shuts off before the maximum shredding  
time, see "Clearing a Jam" section for further instructions.  
6. Move power switch to OFF (O) position when shredding is com-  
plete.  
4. Repeat steps 2-3 above at least 3 times.  
7. Unplug power cord from outlet whenever shredder is unattended  
or not in use.  
8. Look through viewer to see if basket is full. If full, pull out bas-  
ket and empty basket contents. Replace basket into cabinet.  
Cool-Down Cycle  
This shredder is protected with a special safety feature which prevents  
the motor from overheating with extensive use. When shredding is  
attempted beyond the machine's maximum running time, the shred-  
der will automatically shut off its motor until it has cooled to an  
acceptable operating level. This is normal and the shredder will  
return to operation after the cool-down or "off" period. See "Product  
Usage Guide" on front panel for maximum running time and related  
cooling of "off" time.  
Clearing a Jam  
If the shredder sheet capacity is exceeded or paper is not put in  
straight, a jam may result. See "Product Usage Guide" on front panel  
for maximum sheet capacity for your shredder. In the case of a jam,  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUBLESHOOTING  
LIMITED WARRANTY  
Fellowes warrants all the cutting cylinders of the machine to  
be free of defects in material and workmanship for 5 years  
from the date of  
purchase by the original consumer. Fellowes warrants all other  
parts of the machine to be free of defects in material and  
workmanship for 1 year from the date of purchase by the orig-  
inal consumer. If any part is found to be defective during the  
warrant period, your sole and exclusive  
Shredder will not operate.  
a. Shredder is not plugged in.  
b. Power switch is in the OFF (O) position.  
Move switch to AUTO (I) position.  
c. Shredder is jammed. See "Clearing a  
Jam" section.  
d. Shredder has exceeded the maximum run  
time and requires a "cool-down" time. See  
"Product Usage Guide" on front panel.  
e. Shredder is not assembled properly. See  
"Assembly."  
remedy will be repair or replacement, at Fellowes’ option and  
expense, of the defective part.  
This warranty does not apply in cases of abuse, mishandling or  
unauthorized repair. ANY IMPLIED WARRANTY, INCLUDING  
THAT OF MERCHANTABILITY OR FITNESS FOR A  
PARTICULAR PURPOSE, IS HEREBY LIMITED IN DURATION TO  
THE APPROPRIATE  
Shredder makes a loud  
squeaking or rubbing  
noise.  
a. Cutting blades need to be oiled REGULAR-  
LY. See "MAINTENANCE" section.  
WARRANTY PERIOD SET FORTH ABOVE.  
In no event shall Fellowes be liable for any  
Shredder suddenly stops  
while  
shredding.  
a. Shredder has exceeded the maximum run  
time and requires a "cool-down" time. See  
"Product Usage Guide" on front panel.  
b. Shredder is jammed. See "OPERATION -  
Clearing a Jam."  
consequential or incidental damages attributable to this prod-  
uct. This warranty gives you specific legal rights. You may  
have other legal rights that vary from state to state.  
For more detail or to obtain service under this warranty, please  
contact Fellowes Customer Service at 1-800-955-0959,  
Monday through Friday, 8 AM - 5 PM (Central Standard Time).  
For specific instructions on obtaining service under this warran-  
ty on machines purchased outside the USA, contact the appro-  
priate location listed in the Contact for Service section of this  
instruction manual.  
Shredder shreds less than  
capacity.  
a. Cutting blades need to be oiled REGULAR-  
LY. See "MAINTENANCE" section.  
a. Shredder is not assembled properly. See  
"ASSEMBLY."  
b. Paper is jammed. See "OPERATION -  
Clearing a Jam."  
Red LED is lit.  
Warrantor: Fellowes Manufacturing Company.  
a. This is normal. The shredder runs a few sec-  
onds longer than the paper in order to keep  
the cutters clear of paper particles and  
reduce the chances of a jam.  
Shredder runs for a few  
seconds after the paper  
has cleared the cutters.  
Customer Service 1-800-955-0959  
www.fellowes.com  
1789 Norwood Avenue • Itasca, Illinois 60143-1095  
630-893-1600  
®
Australia  
Benelux  
Canada  
France  
Germany  
Italy  
Japan  
Tokyo  
Poland  
United Kingdom  
Tullamarine, Vic  
Vianen, NL  
Markham, Ont.  
Rennes, I-V  
Garbsen, Han.  
Camerano, AN  
Warsaw  
Doncaster, S. Yorks.  
© 2001 Fellowes Printed in China. Form No. 30031B  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Earlex Blower WD1200P User Manual
Echo Brush Cutter SRM 266 S User Manual
Electro Voice Portable Speaker FR12 2 User Manual
Ericsson Two Way Radio MTL SX User Manual
First Alert Home Security System 1 User Manual
Fujitsu Surge Protector FMWSP9 User Manual
Garland Range 36ER32 User Manual
Gateway Computer Monitor XHD3000 User Manual
GE Flat Panel Television JRS06BJ User Manual
Gianni Industries Door EM NH300 Series User Manual