FUNAI VCR ZV457MG9 User Manual
Owner's Manual  
ZV457MG9  
DIGITAL VIDEO DISC RECORDER & VIDEO CASSETTE RECORDER  
WITH DIGITAL TUNER  
THANK YOU FOR CHOOSING MAGNAVOX.  
NEED HELP FAST?  
READ YOUR QUICK GUIDE AND/OR OWNER'S MANUAL FIRST FOR QUICK TIPS THAT MAKE  
USING YOUR MAGNAVOX PRODUCT MORE ENJOYABLE.  
IF YOU HAVE READ YOUR INSTRUCTIONS AND STILL NEED ASSISTANCE,  
YOU MAY ACCESS OUR ONLINE HELP AT HTTP://WWW.FUNAI-CORP.COM  
OR CALL 1-800-605-8610 WHILE WITH YOUR PRODUCT.  
INSTRUCCIONES EN ESPAÑOL INCLUIDAS.  
© 2008 Funai Electric Co., Ltd.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections  
Basic Connection  
1) Disconnect the power cord of your TV from the AC outlet.  
2) Make the basic connection as illustrated below.  
DIGITAL VIDEO DISC RECORDER & VIDEO CASSETTE RECORDER  
WITH DIGITAL TUNER  
rear of this unit  
HDMI OUT  
OUT  
DVD/VCR  
IN ---AUDIO---OUT  
DVD/VCR  
S-VIDEO IN ---AUDIO---OUT  
L
L
S-VIDEO  
IN  
ANTENNA  
VHF / UHF  
antenna  
R
R
IN  
IN ---VIDEO---OUT  
OUT  
IN  
ZV457MG9  
L
This unit is compatible to play back the following discs / files.  
Playable Discs  
R
IN  
IN ---VIDEO---OUT  
ANTENNA  
Playable discs  
Logos  
Playable discs  
Logos  
or  
rear of your TV  
RF coaxial cable  
RF coaxial cable  
cable TV  
company  
DVD-video  
DVD+RW  
DVD+R  
CD-DA (audio CD)  
This connection is for  
TV loop through only  
RCA audio  
cable  
RCA video  
cable  
video CD  
R
L
ANT. IN  
AUDIO IN VIDEO IN  
CD-RW  
CD-R  
3) Plug in the power cords of the devices to the AC outlet.  
DVD-RW  
(Finalized video mode discs only)  
Connection to a Cable / Satellite Box  
Playable files  
Media  
DVD-R  
CD-DA  
1) Disconnect the power cords of the devices from the AC outlet.  
2) Make the connection as illustrated below.  
(Finalized video mode discs only)  
CD-RW/-R  
MP3  
is a trademark of DVD Format/Logo Licensing Corporation.  
S-video cable  
RCA video cable  
e.g.)  
or  
Region Codes  
rear of this unit  
RCA audio  
cable  
HDMI OUT  
OUT  
DVD/VCR  
IN --- AUDIO---OUT  
DVD/VCR  
OUT  
IN  
The number inside the globe refers to region of the world.  
This unit can playback DVD that are labeled for ALL regions or for Region 1.  
S-VIDEO IN ---AUDIO---OUT  
S-VIDEO  
L
L
IN  
ANTENNA  
R
R
IN  
R
L
S-VIDEO  
OUT  
IN ---VIDEO---OUT  
AUDIO OUT VIDEO OUT  
L
cable/satellite  
box  
This unit can record to DVD+RW, DVD+R, DVD-RW and DVD-R. DVD+R/DVD-R can only  
be recorded to once. DVD+RW/DVD-RW can be recorded to and erased many times.  
DVD-RW/-R will be recorded in the DVD+VR mode automatically in this unit.  
ANTENNA  
Recordable Discs  
R
IN  
IN ---VIDEO---OUT  
RF coaxial  
cable  
This connection is  
for TV loop  
through only  
•
Following discs are recommended for good recording quality and  
are proven to be compatible with this unit. However, depending on  
the media condition the unit may not read the disc properly.  
RF coaxial  
cable  
Logo  
Attributes  
ANT. IN  
RF OUT ANT. IN  
Verbatim DVD+R 8x, DVD+RW 4x, DVD-R 8x, DVD-RW 2x  
rear of your TV  
satellite  
dish  
8cm/12cm, single-sided,  
single layer disc  
Approx. max. recording time  
(SLP mode):  
360 minutes (4.7GB) (for 12cm)  
108 minutes (1.4GB) (for 8cm)  
JVC  
DVD-RW 4x  
RCA audio  
cable  
Maxell  
SONY  
TDK  
DVD+R 4x/8x/16x, DVD-R 8x/16x  
DVD+R 4x/8x/16x, DVD+RW 4x  
DVD+R 4x/8x/16x  
DVD+RW DVD+R  
RCA video  
cable  
RF coaxial  
cable  
Performance of any other discs are not guaranteed.  
or  
• You can play back DVD+RW on most DVD players without  
finalizing. However, if you have added or deleted chapters,  
or made chapters hidden, you must perform “Make Edits  
Compatible” before being able to see those effects on other units. (Refer to page 80 in the owner's manual.) To  
play back discs other than DVD+RW on other DVD players, you will need to finalize.  
R
L
DVD-RW DVD-R  
VIDEO IN  
AUDIO IN  
cable TV  
company  
3) Plug in the power cords of the devices to the AC outlet.  
• DVD-RW recorded in the mode other than +VR is not recordable on this unit  
Unrecordable Discs  
unless you erase all contents in the disc. (Refer to page 79 in the owner's manual.)  
• DVD-R recorded in the mode other than +VR is not recordable on this unit.  
Printed in China  
1VMN25874 / E9M81UD_QG ★★★★★  
Follow to the back side of this sheet.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3 – 2  
Timer Recording  
2
Initial Setting  
You can program the unit to record up to 12 programs within a month in  
advance. Daily or weekly program recordings are also available.  
Before recording, make sure  
STANDBY-ON  
You need to follow these steps when you turn on this unit for the first time.  
Initial Setup  
SOURCE  
.@/:  
DTV/TV  
DISPLAY OPEN/CLOSE  
STANDBY-ON  
A
• Set the clock before setting a timer programming.  
• Insert a recordable disc with enough recordable space or a cassette tape with  
an erase-protection tab.  
ABC  
DEF  
Press [STANDBY-ON y].  
Turn on the TV. Select the input to which the unit is connected.  
1
OSD Language  
English  
Français  
Español  
SOURCE  
PLAY OPEN/CLOSE  
1
GHI  
4
2
JKL  
5
3
MNO  
6
A
1
C  
DEF  
1
GHI  
4
2
JKL  
5
3
MNO  
6
PQRS  
TUV  
WXYZ  
7
8
9
CLEAR  
Initial Setup  
SPACE  
1
Press [TIMER].  
Use [K / L] to select your desired language, then press  
2
PQRS  
TUV  
WXYZ  
.
0
2
7
8
SPACE  
9
CLEAR  
[OK] to set language.  
DISC MENU  
S
Channel Preset  
o
.
0
Make sure the antenna is  
connected to “ANTENNA IN” jack.  
DISC MENU  
SETU
2
s
B
OK  
p
Antenna  
o
2
Use [K / L] to select “New Program”, then press [OK].  
Cable (Analog)  
TITLE  
TURN  
Cable (Analog / Digital)  
Use [K / L] to select the type of broadcasting signal,  
3
s
B
OK  
p
4
then press [OK].  
The unit will start getting channels available in your area.  
Timer Programming  
TITLE  
RETURN  
j
F
i
B
Initial Setup  
TUE JAN/01 11:00AM  
End CH  
New Program  
h
g
C
Date  
Start  
j
F
i
C
B
CHANNEL  
Clock Setting  
- - - - - - - - - ( - - - )  
--  
+
h
g
/
/
- - - - - -  
:
REC MODE VCR  
DVD  
TIMER  
AUDIO  
CHANNEL  
Press [OK] to activate “Clock Setting”.  
4
--  
+
REC  
HDMI  
Initial Setup  
REC MODE VCR  
DVD  
TIMER  
AUDIO  
I
1/1  
CM SKIP D.DUBBING TIMER SET RAPID PLAY  
1
REC  
HDMI  
Clock Setting  
I
Use [{ / B] to select an item to set, and use [K / L] to  
5
JAN / 01 / 2008 ( TUE )  
12 : 00 AM  
CM SKIP D.DUBBING TIMER SET RAPID PLAY  
5
select the contents to suit your preference, then press [OK].  
Set a timer programming.  
3
3
DVD Recording  
Press [OK].  
4
STANDBY-ON  
3 – 1 Basic Recording  
URCE  
DTV/TV  
DISPLAY OPEN/CLOSE  
4
A
5
Press [TIMER SET] to set a timer programming.  
.@/:  
ABC  
DEF  
Press [DVD].  
1
will appear on the front panel display.  
1
GHI  
4
2
JKL  
5
3
MNO  
6
2
PQRS  
TUV  
WXYZ  
Select a recording media  
(“DVD” or “VCR”).  
Set the date.  
Set start and end  
time.  
Select a desired  
input mode and  
Select a recording  
mode.  
Press [OPEN/CLOSE A] to open the disc tray.  
2
7
8
9
CLEAR  
SPACE  
Place the disc properly. Press [OPEN/CLOSE A]  
channel to record. ( )  
*
.
0
again to close the disc tray.  
DISC U  
SETUP  
e.g.) digital mode  
o
* Make sure the disc is compatible with this unit. (Refer to page 38 in the  
owner's manual for the list of compatible discs.)  
Date  
JAN/02  
CH  
Start  
- - : - -  
REC To  
DVD  
End  
- - : - -  
Mode  
SP  
Date  
JAN/02  
CH  
Start  
12 : 00AM  
REC To  
DVD  
End  
- - : - -  
Mode  
SP  
Date  
JAN/02  
CH  
Start  
12 : 00AM  
REC To  
DVD  
End  
1 : 00AM  
Mode  
SP  
Date  
JAN/02  
CH  
Start  
12 : 00AM  
REC To  
DVD  
End  
1 : 00AM  
Mode  
SP  
Date  
JAN/02  
CH  
Start  
12 : 00AM  
REC To  
DVD  
End  
1 : 00AM  
Mode  
SP  
4
s
B
OK  
p
DTV125. 1  
DTV125. 1  
DTV125. 1  
DTV125. 1  
DTV125. 1  
TITLE  
RETURN  
or  
SP  
2h00m  
SP  
2h00m  
SP  
1h00m  
SP  
1h00m  
SP  
1h00m  
3
Press [REC MODE] to select a recording mode.  
o
p
o
p
o
p
o
p
o
p
j
i
C
B
4
6
B
s
B
B
s
B
B
B
Video/sound  
quality  
Recording  
mode  
Recording  
time  
F
h
g
CHANNEL  
8cm Disc 12cm Disc  
--  
+
HQ (1Hr)  
SP (2Hr)  
SPP (2.5Hr)  
LP (3Hr)  
EP (4Hr)  
SLP (6Hr) 108 min  
18 min  
36 min  
45 min  
54 min  
72 min  
60 min  
120 min  
150 min  
180 min  
240 min  
360 min  
Good  
( ) Refer to "How to select a channel number for the timer recording" on page 44 in the owner's manual for more details.  
*
REC MODE VCR  
DVD  
TIMER  
AUDI
SP(2Hr)  
0h58m  
REC  
HDMI  
1
I
3
Poor  
CM SKIP D.DUBBINID PLAY  
5
4
DVD Playback  
SEARCH  
Press [DTV/TV] to select analog TV or digital TV, then use  
4
[CHANNEL / ] or [the Number buttons] and [ • ] (for digital TV  
channels) to select a desired channel  
To set one-touch timer recording (OTR)...  
to record.  
This is a simple way to set the recording time in blocks of 30 minutes.  
1
Press [DVD].  
2
Open the disc tray,  
3
Close the disc tray.  
4
Start playing back.  
5
Stop playing back.  
Press [REC I] repeatedly until the desired recording time (30 minutes to  
and insert a disc.  
CH 12  
6 hours) appears on the TV screen.  
DVD  
OPEN/CLOSE  
I
0h30m  
OPEN/CLOSE  
One-touch timer recording will start.  
C
B
A
0h30m  
A
• To change the recording length during one-  
5
Press [REC I] to start recording.  
touch timer recording, press [REC I] repeatedly(normal recording)  
1h00m  
until the desired length appears.  
• To cancel one-touch timer recording within the  
6h00m  
5h30m  
specified time, press [STOP C].  
6
Press [STOP C] to stop recording.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PRECAUTIONS  
Do not place the unit on the furniture that is capable of being tilted by a child and an adult leaning, pulling, standing  
or climbing on it. A falling unit can cause serious injury or even death.  
CAUTION:  
To prevent electric shock, match wide blade of plug to wide slot, fully insert.  
ATTENTION: Pour éviter les chocs électriques, introduire la lame la plus large de la fiche dans la borne  
correspondante de la prise et pousser jusqu’au fond.  
FCC WARNING  
This apparatus may generate or use radio frequency energy. Changes or modifications to this apparatus may cause  
harmful interference unless the modifications are expressly approved in the manual. The user could lose the authority  
to operate this apparatus if an unauthorized change or modification is made.  
RADIO-TV INTERFERENCE  
This apparatus has been tested and found to comply with the limits for a Class B digital device, pursuant to Part  
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a  
residential installation. This apparatus generates, uses, and can radiate radio frequency energy and, if not installed  
and used in accordance with the instructions, may cause harmful interference to radio communications. However,  
there is no guarantee that interference will not occur in a particular installation. If this apparatus does cause harmful  
interference to radio or television reception, which can be determined by turning the apparatus off and on, the user  
is encouraged to try to correct the interference by one or more of the following measures:  
1) Reorient or relocate the receiving antenna.  
2) Increase the separation between the apparatus and receiver.  
3) Connect the apparatus into an outlet on a circuit different from that to which the receiver is connected.  
4) Consult the dealer or an experienced radio/TV technician for help.  
This Class B digital apparatus complies with Canadian ICES-003.  
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.  
LASER SAFETY  
This apparatus employs a laser. Only a qualified service person should remove the cover or attempt to service this  
apparatus, due to possible eye injury.  
CAUTION: Use of controls or adjustments or performance of procedures other than those specified herein may  
result in hazardous radiation exposure.  
CAUTION: Visible and invisible laser radiation when open and interlock defeated. Do not stare into beam.  
LOCATION: Inside, near the deck mechanism.  
IMPORTANT COPYRIGHT INFORMATION  
Unauthorized copying, broadcasting, public performance and lending of discs are prohibited. This product incorporates  
copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this  
copyright protection technology must be authorized by Macrovision, and is intended for home and other limited  
viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.  
EN  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
PRECAUTIONS  
To Avoid the Hazards of Electrical Shock and Fire  
Supplied Accessories  
• Do not handle the power cord with wet hands.  
• Do not pull on the power cord when disconnecting it  
from an AC outlet. Grasp it by the plug.  
remote control (NB559UD) with batteries (AAAx2)  
• Do not put your fingers or objects into the unit.  
Location and Handling  
• Do not install the unit in direct sunlight, near strong  
magnetic fields, or in a place subject to dust or strong  
vibration.  
• Avoid a place with drastic temperature changes.  
• Install the unit in a horizontal and stable position.  
Do not place anything directly on top or bottom of  
the unit. Depending on your external devices, noise  
or disturbance of the picture and/or sound may be  
generated if the unit is placed too close to them. In this  
case, please ensure enough space between the external  
devices and the unit.  
RF coaxial cable (WPZ0901TM002)  
RCA audio/video cables (WPZ0102TM018/WPZ0102LTE01)  
owner's manual (1VMN25873)  
• Depending on the environment, the temperature of this  
unit may increase slightly. This is not a malfunction.  
Dew Condensation Warning  
• Dew condensation may form inside the unit in the  
following conditions. If so, do not use this unit at least  
for a few hours until its inside gets dry.  
- The unit is moved from a cold place to a warm place.  
- Under conditions of high humidity.  
- After heating a cold room.  
Note about Recycling  
• This unit’s packaging materials are recyclable  
and can be reused. Please dispose of any  
materials in accordance with your local  
recycling regulations.  
• Batteries should never be thrown away or  
incinerated but disposed of in accordance with your  
local regulations concerning chemical wastes.  
quick guide (1VMN25874)  
Notice for Progressive Scan Output  
• Consumers should note that not all high definition  
television sets are fully compatible with this product  
and may cause artifacts to be displayed in the picture.  
In case of picture problems with 525(480) progressive  
scan output, it is recommended that the user switch  
the connection to the ‘standard definition’ output. If  
there are questions regarding your TV set compatibility  
with this 525p(480p) DVD player, please contact our  
customer service center.  
4
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PRECAUTIONS  
Maintenance  
Servicing  
• Please refer to relevant topics on “TROUBLESHOOTING”  
on pages 96-99 before returning the product.  
• If this unit becomes inoperative, do not try to correct  
the problem by yourself. There are no user-serviceable  
parts inside. Turn off, unplug the power plug and  
please call our help line mentioned on the front page  
to locate an Authorized Service Center.  
Note  
• Remember to read the instructions along with the  
video head cleaner before use.  
• Clean video heads only when problems occur.  
IR signal check  
If the remote control does not work properly, you can test  
if the remote control sends out the infrared signal with  
AM radio or a digital camera (including built-in camera  
of cellular phone). It will help to define the cause of  
malfunction.  
Cleaning the cabinet  
• Use a soft cloth slightly moistened with a mild  
detergent solution. Do not use a solution containing  
alcohol, spirits, ammonia or abrasive.  
•
With an AM radio:  
Cleaning discs  
• When a disc becomes dirty, clean it with a cleaning  
cloth. Wipe the disc from the center to out. Do not  
wipe in a circular motion.  
• Do not use solvents such as benzine, thinner,  
commercially available cleaners, detergent, abrasive  
cleaning agents or antistatic spray intended for analog  
records.  
Tune an AM radio to a station with no  
broadcasting. Press a button on remote  
control toward the radio. Sound will be  
fluttering when you press any key and the  
radio receives the signal. This means the  
remote control is working.  
•
With a digital camera (including built-in  
camera of cellular phone):  
Direct a digital camera to remote control,  
press and hold a button on remote control. If  
infrared light appears through digital camera,  
the remote control is working.  
Cleaning the disc lens  
• If this unit still does not perform properly  
although you refer to the relevant sections and to  
“TROUBLESHOOTING” in this owner's manual, the laser  
optical pickup unit may be dirty. Consult your dealer  
or an Authorized Service Center for inspection and  
cleaning of the laser optical pickup unit.  
Manufactured under license from  
Dolby Laboratories. Dolby and the  
double-D symbol are trademarks of  
Dolby Laboratories.  
Disc handling  
• Handle the discs so that fingerprints and dust do not  
adhere to the surfaces of the discs.  
• Always store the disc in its protective case when it is  
not used.  
Dolby Digital Recording  
“Dolby® Digital Recording enables consumers to record  
high-quality video with stereo sound on recordable  
DVD discs. The technology, when utilized instead of  
PCM recording, also saves recordable disc space, allow-  
ing for higher video resolution or extended recording  
time on each DVD. DVDs created using Dolby Digital  
Recording will play back on all DVD-video players.”  
Note: This is true when the players are compatible with  
actual recordable DVD discs.  
Auto head cleaning  
• Automatically cleans video heads as you insert or  
remove a cassette, so you can see a clear picture.  
• Playback picture may become blurred or interrupted  
while the TV program reception is clear. Dirt accumulated  
on the video heads after a long period of use, or the  
usage of rental or worn tapes can cause this problem. If  
a streaky or snowy picture appears during playback, the  
video heads in your unit may need to be cleaned.  
1. Please visit your local Audio/Video store and purchase a  
good quality VHS video head cleaner.  
HDMI, the HDMI logo and High-  
Definition Multimedia Interface  
are trademarks or registered  
trademarks of HDMI Licensing  
LLC.  
2. If a video head cleaner does not solve the problem, please  
consult your dealer or an Authorized Service Center.  
© 2008 Funai Electric Co., Ltd.  
All rights reserved. No part of this manual may be reproduced, copied, transmitted, disseminated, transcribed,  
downloaded or stored in any storage medium, in any form or for any purpose without the express prior written  
consent of Funai. Furthermore, any unauthorized commercial distribution of this manual or any revision hereto is  
strictly prohibited.  
Information in this document is subject to change without notice. Funai reserves the right to change the content  
herein without the obligation to notify any person or organization of such changes.  
with the  
design is a registered trademark of Funai Electric Co., Ltd and may not be used in any way without  
the express written consent of Funai. All other trademarks used herein remain the exclusive property of their respective  
owners. Nothing contained in this manual should be construed as granting, by implication or otherwise, any license or  
right to use any of the trademarks displayed herein. Misuse of any trademarks or any other content in this manual is  
strictly prohibited. Funai shall aggressively enforce its intellectual property rights to the fullest extent of the law.  
EN  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTENTS  
Introduction  
Recording  
PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2  
FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8  
Symbols Used in this Owner’s Manual . . . . . . . . . . . . . . .9  
FUNCTIONAL OVERVIEW . . . . . . . . . . . . . . . . . . . . . . . . 10  
Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12  
Front Panel Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
INFORMATION ON DVD RECORDING . . . . . . . . . . . . . 38  
BEFORE RECORDING . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39  
Make Recording Compatible . . . . . . . . . . . . . . . . . . . . . . 39  
Setting for Auto Chapter . . . . . . . . . . . . . . . . . . . . . . . . . . 39  
Recording the DTV Closed Caption . . . . . . . . . . . . . . . . 39  
BASIC RECORDING &  
ONE-TOUCH TIMER RECORDING . . . . . . . . . . . . . . . . . 40  
TIMER RECORDING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42  
Hints for Timer Recording . . . . . . . . . . . . . . . . . . . . . . . . . 45  
OVERWRITING UNNECESSARY TITLE . . . . . . . . . . . . . 46  
Overwriting from the Beginning of the Title. . . . . . . . 46  
Overwriting in the Middle of the Title. . . . . . . . . . . . . . 46  
Hints for Overwriting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47  
SETTINGS FOR AN EXTERNAL DEVICE . . . . . . . . . . . . 48  
Connection to an External Device. . . . . . . . . . . . . . . . . . 48  
Recording from an External Device . . . . . . . . . . . . . . . . 49  
BI-DIRECTIONAL DUBBING . . . . . . . . . . . . . . . . . . . . . . 50  
SETTING A DISC TO PROTECT . . . . . . . . . . . . . . . . . . . . 52  
PLAYING THE DISCS ON OTHER DVD PLAYERS . . . . 53  
Finalizing a Disc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53  
Auto Finalizing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54  
Connections  
ANTENNA CABLE CONNECTION . . . . . . . . . . . . . . . . . . 15  
RF MODULATOR CONNECTION. . . . . . . . . . . . . . . . . . . 16  
CONNECTION TO A CABLE / SATELLITE BOX. . . . . . . 17  
CONNECTION TO A TV. . . . . . . . . . . . . . . . . . . . . . . . . . . 18  
CONNECTION TO A TV WITH AN HDMI™  
COMPATIBLE PORT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19  
CONNECTION TO AN AUDIO SYSTEM . . . . . . . . . . . . . 20  
Basic Setup  
BEFORE YOU START . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21  
Finding the Viewing Channel on Your TV . . . . . . . . . . 21  
Guide to On-Screen Display / Menu. . . . . . . . . . . . . . . . 22  
Main Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24  
Switching DVD / VCR Mode. . . . . . . . . . . . . . . . . . . . . . . . 25  
How to Insert a Disc / Cassette Tape . . . . . . . . . . . . . . . 25  
INITIAL SETTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26  
CHANNEL SETTING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27  
Auto Channel Scan. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27  
Adding / Deleting Channels . . . . . . . . . . . . . . . . . . . . . . . 28  
SETTING THE CLOCK . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30  
Auto Clock Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30  
Manual Clock Setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31  
Daylight Saving Time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31  
TUNER SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32  
Switching Analog Mode / Digital Mode . . . . . . . . . . . . 32  
Channel Selection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32  
Selecting TV Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33  
DTV Closed Caption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35  
Closed Caption Style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36  
6
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTENTS  
Playback  
Editing  
INFORMATION ON PLAYBACK . . . . . . . . . . . . . . . . . . . 55  
BASIC PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57  
Direct Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57  
Playback from the Title List . . . . . . . . . . . . . . . . . . . . . . . . 58  
Playing Back an Audio CD and a CD-RW/-R  
INFORMATION ON DISC EDITING. . . . . . . . . . . . . . . . . 69  
Guide to a Title List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69  
Editing Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69  
EDITING DISCS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70  
Deleting Titles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70  
Putting Names on Titles . . . . . . . . . . . . . . . . . . . . . . . . . . . 71  
Setting Chapter Marks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72  
Clearing Chapter Marks . . . . . . . . . . . . . . . . . . . . . . . . . . . 73  
Hiding Chapters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75  
Setting Pictures for Thumbnails. . . . . . . . . . . . . . . . . . . . 76  
Dividing a Title. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77  
Putting Name on Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78  
Erasing Disc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79  
Making Edits Compatible. . . . . . . . . . . . . . . . . . . . . . . . . . 80  
with MP3 Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59  
Using the Title / Disc Menu . . . . . . . . . . . . . . . . . . . . . . . . 60  
Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60  
SPECIAL PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61  
Resume Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61  
Fast Forward / Fast Reverse Playback . . . . . . . . . . . . . . 61  
Skipping TV Commercials During Playback. . . . . . . . . 61  
Rapid Playback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61  
Step by Step Playback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62  
Slow Forward / Slow Reverse Playback. . . . . . . . . . . . . 62  
Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62  
Marker Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63  
Repeat Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63  
Random Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64  
Program Playback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64  
SEARCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65  
Title / Chapter Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65  
Track Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65  
Time Search. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66  
SELECTING THE FORMAT OF AUDIO AND VIDEO . . 67  
Switching Subtitles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67  
Switching Audio Soundtrack . . . . . . . . . . . . . . . . . . . . . . 67  
Switching Virtual Surround System . . . . . . . . . . . . . . . . 68  
Switching Camera Angles . . . . . . . . . . . . . . . . . . . . . . . . . 68  
Reducing Block Noise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68  
Function Setup  
LIST OF SETTINGS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81  
SETUPS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84  
Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84  
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87  
Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90  
HDMI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91  
Reset All . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92  
VCR Functions  
VCR FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93  
Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93  
Recording. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93  
One-touch Timer Recording (OTR) . . . . . . . . . . . . . . . . . 94  
Index Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94  
Time Search. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95  
Other Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95  
Others  
TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96  
Frequently Asked Questions. . . . . . . . . . . . . . . . . . . . . . . 98  
Note for Output Jacks on the Rear Panel . . . . . . . . . . . 98  
LANGUAGE CODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100  
GLOSSARY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101  
SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102  
Español  
ESPAÑOL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103  
LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . Back cover  
EN  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
FEATURES  
This unit not only plays back DVD, CD and VCR but also offers features for you to record on DVD and edit them after  
that. The following features are offered with this unit.  
VCR mode  
Recording  
Quick search for what you want to watch:  
This unit is compatible with DVD+RW/DVD-RW, which  
are rewritable repeatedly and DVD+R/DVD-R, which are  
available for recording once. Even if you choose DVD-  
RW/DVD-R, these discs will automatically be recorded in  
the DVD+VR mode. Also, this unit allows you to record  
to the cassette tape. You can choose either one for your  
convenience.  
You can easily find the part you want to watch using the  
index search/time search functions. An index mark will be  
assigned at the beginning of each recording you make.  
For time search function, you can go to a specific point on  
a cassette tape by entering the exact amount of time you  
wish to skip.  
DVD mode VCR mode  
Up to 12 program recording:  
Editing  
You can program the unit to record up to 12 programs  
within a one-month period. Daily or weekly program  
recordings are also available.  
DVD mode  
Deleting titles:  
You can delete titles which you do not need anymore.  
Putting names on titles:  
You can put your favorite names on titles.  
Setting / clearing chapter marks:  
You can set / clear chapter marks on titles.  
One-touch timer recording (OTR):  
You can easily set a recording time as you prefer. Every  
time [REC I] is pressed during recording, the recording  
time will be increased by 30 minutes up to 6 hours for  
DVD, and 8 hours for VCR. The recording automatically  
stops when the recording time you set is reached or the  
disc is full.  
Hiding chapters:  
To keep others from playing back some chapters without  
permission, you can hide chapters.  
Setting pictures for thumbnails:  
You can change pictures for thumbnails.  
Dubbing mode:  
You can copy a DVD to a cassette tape or copy a cassette  
tape to a DVD. This function will be possible only if the  
DVD or a cassette tape is not copy protected.  
You cannot record on a cassette tape when its erase-pro-  
tection tab is removed.  
Dividing titles (DVD+RW/DVD-RW only):  
You can divide a title into 2 or more.  
Putting name on disc:  
You can put your favorite disc name.  
Left channel stereo recording:  
This unit can record the sound of the left channel monau-  
ral input as left and right channels automatically.  
Compatibility  
DVD mode  
DVD mode  
Automatic chapter mark setting:  
Chapter marks will be put on recordings as you set before  
attempting to record.  
Available for playing back discs on a regular DVD  
player:  
Recorded discs can be played back on regular DVD  
players, including computer DVD drives compatible  
with DVD-video playback. Although DVD+R are playable  
on other units without finalization in most cases, it  
is recommended to finalize in order to stabilize the  
performance. For DVD-RW/-R, you need to finalize the  
recorded discs to play back on other DVD players.  
Automatic title list making:  
The unit makes a title list with the index automatically.  
Playback  
DVD mode  
Theater surround sound in your home:  
When connecting the unit to an amplifier or a decoder  
which is compatible with Dolby Digital, you can experi-  
ence the theater surround sound from discs with sur-  
round sound system.  
Others  
DVD mode  
Progressive scan system  
Quick search for what you want to watch:  
You can easily find the part you want to watch using the  
search function. Search for a desired point on a disc by  
title, chapter or time.  
Unlike conventional interlace scanning, the progressive  
scan system provides less flickering and images in higher  
resolution than that of traditional television signals.  
HDMI (High-Definition Multimedia Interface)  
Virtual surround system:  
You can enjoy stereophonic space through your existing  
2 channel stereo system.  
You can enjoy clearer audio/video output when connecting  
this unit to a display device with an HDMI-compatible port.  
Playing back MP3 files:  
You can enjoy MP3 files which are recorded on CD-RW/-R.  
8
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FEATURES  
Symbols Used in this Owner’s Manual  
To specify for what disc type each function is, we put  
the following symbols at the beginning of each item to  
operate.  
* DVD-RW/-R recorded in VR mode or non compatible  
recording format are not playable.  
* DVD-RW recorded in the mode other than +VR is not  
recordable on this unit unless you erase all contents in  
the disc (refer to page 79).  
* DVD-R recorded in the mode other than +VR is not  
recordable on this unit.  
Symbol Description  
For Recording, Playing Back, and Editing  
Description refers to DVD+RW  
Description refers to DVD+R  
Description refers to DVD-RW  
Description refers to DVD-R  
For Recording and Playing Back  
Description refers to VHS tapes  
Use only cassettes marked VHS (  
)
For Playback only  
Description refers to DVD-video  
Description refers to audio CD  
Description refers to video CD with PBC function  
Description refers to video CD without PBC  
function  
Description refers to CD-RW/-R with MP3 files  
If you do not find any of the symbols listed above under the  
function heading, the operation is applicable to all media.  
EN  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
FUNCTIONAL OVERVIEW  
Front Panel  
1
2*  
3
23 22  
21 20 19 18 17 16  
15  
14 13 12 11 10 9 8* 7 6  
5
4
( ) The unit can also be turned on by pressing these buttons or inserting a cassette tape.  
*
1. Cassette compartment (VCR)  
Insert a cassette tape here.  
14. CHANNEL L / K buttons (DVD/VCR)  
Press to change the channel up and down.  
2. OPEN/CLOSE A button (DVD)*  
Press to open or close the disc tray.  
3. Disc tray (DVD)  
15. Display  
Refer to “Front Panel Display” on page 14.  
16. Infrared sensor window (DVD/VCR)  
Receive signals from your remote control so that you  
can control the unit from a distance.  
17. RECORD I button (VCR)  
Place a disc when it is open.  
4. AUDIO input jacks (L2) (DVD/VCR)  
Use to connect external device with an RCA audio  
cable.  
5. VIDEO input jack (L2) (DVD/VCR)  
Use to connect external device with an RCA video  
cable.  
Press once to start a recording. Press repeatedly to  
start the one-touch timer recording.  
18. PLAY B button (VCR)  
Press to start playback.  
19. STOP/EJECT  
6. S-VIDEO input jack (L2) (DVD/VCR)  
Use to connect the S-video output of external device  
with an S-video cable.  
C
A button (VCR)  
Press to remove the cassette tape from the cassette  
compartment.  
7. RECORD I button (DVD)  
Press to stop cassette tape playback or recording.  
Press to stop the proceeding timer recording in VCR.  
20. F.FWD D button (VCR)  
Press once to start a recording.  
Press repeatedly to start the one-touch timer  
recording.  
Press to rapidly advance the cassette tape, or view the  
picture rapidly in forward during playback (forward  
search).  
8. PLAY B button (DVD)*  
Press to start or resume playback.  
9. STOP C button (DVD)  
Press to stop playback or recording.  
Press to stop the proceeding timer recording in DVD.  
10.DVD indicator  
Lights up when the DVD output mode is selected.  
11.SOURCE button (DVD/VCR)  
Press to select the component you wish to operate.  
12.VCR indicator  
Lights up when the VCR output mode is selected.  
13.D.DUBBING button (DVD/VCR)  
Press to start VCR to DVD (DVD to VCR) duplication  
which you set in the main menu.  
21. REW E button (VCR)  
Press to rewind the cassette tape, or to view the  
picture rapidly in reverse during playback (rewind  
search).  
22. STANDBY-ON y button (DVD/VCR)  
Press to turn on and off the unit.  
23.POWER-ON indicator (DVD/VCR)  
Red LED lights up when power is on.  
10 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FUNCTIONAL OVERVIEW  
Rear Panel  
1
2
3
HDMI OUT  
OUT  
IN  
DVD  
DVD/VCR  
DIGITAL  
AUDIO OUT  
AUDIO  
OUT  
S-VIDEO COMPONENT S-VIDEO IN ---AUDIO---OUT  
VIDEO OUT  
Y
L
L
ANTENNA  
PB  
/CB  
R
R
L
OUT  
IN  
COAXIAL  
IN ---VIDEO---OUT  
PR  
/CR  
R
13 12 11 10 9 8 7 6 5  
4
1. AC Power Cord (DVD/VCR)  
9. S-VIDEO IN jack (L1) (DVD/VCR)  
Connect to a standard AC outlet to supply power to this  
unit.  
Use to connect the S-video output of external device  
with an S-video cable.  
2. HDMI OUT jack (DVD only)  
Use an HDMI cable to connect to a display with an  
HDMI compatible port.  
10. COMPONENT VIDEO OUT jacks (DVD only)  
Use to connect a TV monitor with component video  
inputs with a component video cable.  
3. ANTENNA OUT jack (DVD/VCR)  
Use to connect an RF coaxial cable to pass the signal  
from the ANTENNA IN to your TV monitor.  
4. ANTENNA IN jack (DVD/VCR)  
Use to connect an antenna.  
5. AUDIO OUT jacks (DVD/VCR)  
Use to connect a TV monitor, AV receiver or other  
device with an RCA audio cable.  
6. VIDEO OUT jack (DVD/VCR)  
Use to connect a TV monitor, AV receiver or other  
device with an RCA video cable.  
7. VIDEO IN jack (L1) (DVD/VCR)  
Use to connect external device with an RCA video  
cable.  
11. S-VIDEO OUT jack (DVD only)  
Use to connect the S-video input of a TV monitor, AV  
receiver or other device with an S-video cable.  
12. AUDIO OUT jacks (DVD only)  
Use to connect a TV monitor, AV receiver or other  
device with an RCA audio cable.  
13. COAXIAL DIGITAL AUDIO OUT jack (DVD only)  
Use to connect an AV receiver, Dolby Digital decoder  
or other device with a digital audio coaxial input jack  
with a digital audio coaxial cable.  
Note  
• Do not touch the inner pins of the jacks on the rear  
panel. Electrostatic discharge may cause permanent  
damage to the unit.  
8. AUDIO IN jacks (L1) (DVD/VCR)  
Use to connect external device with an RCA audio  
cable.  
• This unit does not have the RF modulator.  
EN 11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FUNCTIONAL OVERVIEW  
Remote Control  
Installing the Batteries in the Remote Control  
Using a Remote Control  
Install the batteries (AAAx2) matching the polarity  
indicated inside battery compartment of the remote  
control.  
Keep in mind the following when using the remote  
control:  
Make sure that there are no obstacles between the remote  
control and the infrared sensor window on the unit.  
•
• Remote operation may become unreliable if strong  
sunlight or fluorescent light is shining on the infrared  
sensor window of the unit.  
Open the cover.  
• Remote control for different devices can interfere with  
each other. Avoid using remote control for other device  
located close to the unit.  
1
• Replace the batteries when you notice a fall off in the  
operating range of the remote control.  
• The maximum operable ranges from the unit are as  
follows.  
- Line of sight: approx. 23 feet (7m)  
- Either side of the center:  
Insert batteries.  
approx. 16 feet (5m) within 30°  
- Above: approx. 16 feet (5m) within 15°  
- Below: approx. 10 feet (3m) within 30°  
2
16 feet (5m)  
30˚  
23 feet (7m)  
16 feet (5m)  
30˚  
Make sure to match + and - on the batteries to  
the marks indicated in the battery compartment.  
STANDBY-ON  
Close the cover.  
1
3
4
18  
19  
2
SOURCE  
.@/:  
DTV/TV  
DISPLAY OPEN/CLOSE  
A
3
ABC  
DEF  
1
GHI  
4
2
JKL  
5
3
MNO  
6
PQRS  
TUV  
WXYZ  
7
8
SPACE  
9
CLEAR  
.
0
5
6
7
20  
21  
22  
DISC MENU  
SETUP  
o
s
B
OK  
p
TITLE  
RETURN  
Note  
23  
8
9
11  
24  
26  
Incorrect use of batteries can result in hazards such as  
leakage and bursting. Please observe the following:  
j
F
i
C
B
25  
27  
10  
h
g
• Do not mix new and old batteries together.  
CHANNEL  
• Do not use different kinds of batteries together.  
Although they may look similar, different batteries  
may have different voltages.  
• Make sure that the + and - ends of each battery  
match the indications in the battery compartment.  
• Remove batteries from battery compartment that is  
not going to be used for a month or more.  
• When disposing of used batteries, please comply  
with governmental regulations or environmental  
public instruction’s rules that apply in your country  
or area.  
--  
+
12  
13  
14  
15  
16  
17  
28  
29  
31  
REC MODE VCR  
DVD  
TIMER  
AUDIO  
REC  
HDMI  
30  
I
CM SKIP D.DUBBING TIMER SET RAPID PLAY  
32  
34  
SEARCH  
33  
• Do not recharge, short-circuit, heat, burn or  
disassemble batteries.  
12 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FUNCTIONAL OVERVIEW  
1. DISPLAY button (DVD/VCR)  
20.CLEAR button (DVD/VCR)  
• Press to display the display menu on or off.  
2. DTV/TV button (DVD/VCR)  
• Press to switch between digital TV (DTV) mode and  
analog TV (TV) mode.  
DVD mode:  
• Press to clear the password once entered or to can-  
cel the programming for CD or to clear the selected  
marker number, etc.  
3. SOURCE button (DVD/VCR)  
VCR mode:  
• Press to select the appropriate input.  
4. Number/Character buttons (DVD/VCR)  
• Press to select channel numbers.  
• Press to select a title/chapter/track/file on display.  
• Press to enter values for the settings in the main menu.  
• Press to enter title names.  
• Press to reset the tape counter.  
21.SETUP button (DVD/VCR)  
• Press to display the main menu.  
• During DVD playback, press and hold for more than  
3 seconds to switch the progressive scanning mode  
to the interlace mode.  
• Press to start the index/time search in VCR mode.  
5. Confirm ( • ) button (DVD/VCR)  
Analog mode:  
• Press to confirm the channel selection made by  
[the Number buttons].  
Digital mode:  
22.Cursor K / L / { / B buttons (DVD/VCR)  
• Press to select items or settings.  
23.RETURN button (DVD/VCR)  
• Press to return to the previously displayed menu screen.  
24.PLAY B button (DVD/VCR)  
• Press to start playback or resume playback.  
25.NEXT G button (DVD)  
• Press to confirm the major / minor channel  
selection made by [the Number buttons].  
6. DISC MENU button (DVD)  
• During playback, press to skip to the next chapter,  
track or file.  
• When playback is in pause, press repeatedly to for-  
ward the playback step by step.  
• Press to display the disc menu.  
7. OK button (DVD/VCR)  
• Press to confirm or select menu items.  
8. TITLE button (DVD)  
26.FFW D button (DVD/VCR)  
DVD mode:  
• Press to display the title list.  
9. PREV H button (DVD)  
• During playback, press to fast forward playback.  
• When playback is paused, press to slow forward playback.  
VCR mode:  
• During playback, press to return to the beginning of  
the current chapter, track or file.  
• During playback, press to rapidly advance the  
cassette tape or view the picture rapidly in forward.  
• When playback is paused, press to view the cassette  
tape in slow motion.  
• When playback is in pause, press repeatedly to  
reverse the playback step by step.  
10.REW E button (DVD/VCR)  
DVD mode:  
27.STOP C button (DVD/VCR)  
• During playback, press to fast reverse playback.  
• When playback is paused, press to slow reverse playback.  
VCR mode:  
• Press to stop playback or recording.  
DVD mode:  
• Press to exit from the title list.  
• During playback, press to rewind the cassette tape  
or to view the picture rapidly in reverse.  
11.PAUSE F button (DVD/VCR)  
• Press to pause playback or recording.  
28.DVD button  
• Press to select the DVD output mode.  
29.TIMER button (DVD/VCR)  
• Press to display the timer programming list.  
30.HDMI button (DVD)  
12.CHANNEL  
/
buttons (DVD/VCR)  
DVD mode:  
• Press to set the HDMI connector’s video signal out-  
put mode.  
• Press to change the channel up and down.  
VCR mode:  
• Press to change the channel up and down.  
• Press to adjust the tracking during playback or in slow  
motion of the cassette tape.  
• While playback is in still mode, you can adjust the  
picture blurred vertically.  
31.AUDIO button (DVD/VCR)  
DTV mode:  
• Press to switch the audio language for digital TV.  
DVD mode:  
• Press to display the audio menu during playback.  
VCR mode:  
13.VCR button  
• During playback of a Hi-Fi videotape, press to  
change the audio out setting.  
• Press to select the VCR output mode.  
14.REC MODE button (DVD/VCR)  
• Press to switch the recording mode.  
15.REC I button (DVD/VCR)  
32.RAPID PLAY button (DVD)  
• During playback, press to play back in a slightly  
faster/slower mode with keeping the audio quality.  
33.TIMER SET button (DVD/VCR)  
• Press to set the unit in the timer standby mode. In  
the timer standby mode, press to cancel the mode  
and to turn the unit on.  
• Press once to start a recording.  
• Press repeatedly to start the one-touch timer recording.  
16.CM SKIP button (DVD)  
• During playback, press to skip 30 seconds.  
17.SEARCH button (VCR)  
• Press to call up the index or time search menu.  
18.STANDBY-ON y button (DVD/VCR)  
• Press to turn the unit on and off.  
19.OPEN/CLOSE A button (DVD/VCR)  
DVD mode:  
34.D.DUBBING button (DVD/VCR)  
• Press to start VCR to DVD (DVD to VCR) duplication  
which you set in the main menu.  
Note  
• If you turn off this unit, [OPEN/CLOSE A] on the remote  
• Press to open or close the disc tray.  
VCR mode:  
• Press to remove the cassette tape from the cassette  
compartment.  
control is not available.  
Be sure to use [OPEN/CLOSE A] or [STOP/EJECT  
C
A]  
on the unit.  
EN 13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FUNCTIONAL OVERVIEW  
Front Panel Display  
2
3
DTV BS CS  
DR  
CD  
VCR  
1
PM  
4
DB HDD  
DVD  
5
1.  
: Appears when the timer  
programming or OTR has  
been set or is proceeding.  
: Appears when this unit is in  
DVD output mode.  
: Appears when the timer  
recording is proceeding in  
DVD.  
: Appears when DVD is in the  
timer recording standby  
mode.  
: Flashes when a program  
cannot be performed for  
some reasons.  
DVD  
DB  
: Appears in the afternoon  
with the clock display.  
PM  
2.  
: Flashes when all timer  
recordings have been finished.  
: Appears when the channel is  
in DTV mode.  
: Appears during recording  
process.  
: Flashes when a recording is in  
pause.  
DTV  
3. Title / track / file and chapter mark  
: Appears when indicating a  
title / track / file number.  
: Appears when this unit is in  
DVD output mode and a disc  
is in the unit.  
: Appears during duplication  
process.  
: Appears when indicating a  
chapter number.  
: Appears during VCR to DVD  
duplication process.  
: Appears during DVD to VCR  
duplication process.  
4. Current status of the unit  
: Appears when playback is in  
pause, or in step by step  
playback.  
: Appears when this unit is in  
VCR output mode and a  
cassette tape is in the unit.  
5. Displays the following  
• Elapsed playback time  
: Appears when playing back a  
disc, or a cassette tape.  
: Appears during duplication  
process.  
• Current title / chapter / track /file  
number  
• Recording time / remaining time  
• Clock  
: Appears during slow forward  
/ reverse playback.  
: Appears when this unit is in  
VCR output mode.  
VCR  
: Appears when the timer  
• Selected channel number  
• Remaining time for one-touch  
timer recording  
• Selected HDMI output mode  
• VCR tape counter  
recording is proceeding in VCR.  
: Appears when VCR is in the  
timer recording standby mode.  
: Flashes when a program cannot  
be performed for some reasons.  
Display Message  
Appears when the disc tray is  
opening.  
Appears when HDMI output  
mode (480p) is selected.  
DVD  
DVD  
DVD  
DVD  
DVD  
DVD  
Appears when HDMI output  
mode (720p) is selected.  
Appears when the disc tray is  
closing.  
DVD  
Appears when a disc is loaded  
on the disc tray.  
Appears when HDMI output  
mode (1080i) is selected.  
DVD  
Appears when data is being  
recorded on a disc.  
Appears when HDMI output  
mode (1080p) is selected.  
DVD  
Appears when the PBC function  
is activated. (Video CD playback  
only. Refer to page 56.)  
14 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ANTENNA CABLE CONNECTION  
This section describes how to connect your unit to an antenna, cable box, etc.  
Disconnect the power cord of your TV from the AC outlet.  
1
2
Disconnect RF coaxial cable from antenna input jack of your TV.  
VHF / UHF  
antenna  
rear of your TV  
or  
ANT. IN  
1
RF coaxial cable  
cable TV  
company  
disconnect  
2
disconnect  
Connect cables to the unit.  
Make the basic connection as illustrated below.  
3
rear of this unit  
HDMI OUT  
OUT  
DVD/VCR  
DVD  
DVD/VCR  
S-VIDEO IN ---AUDIO---OUT  
L
L
S-VIDEO  
IN ---AUDIO---OUT  
IN  
ANTENNA  
VHF / UHF  
antenna  
R
R
IN  
IN ---VIDEO---OUT  
OUT  
L
R
IN  
IN  
IN ---VIDEO---OUT  
ANTENNA  
or  
rear of your TV  
RF coaxial cable  
RF coaxial cable  
cable TV  
company  
This connection is for  
TV loop through only  
RCA audio  
cable  
RCA video  
cable  
R
L
ANT. IN  
AUDIO IN VIDEO IN  
Plug in the power cord of this unit and your TV to the AC outlet.  
4
rear of your TV  
Supplied cables used in this connection are as follows:  
• RF coaxial cable x 1  
• RCA audio cable (L/R) x 1  
• RCA video cable x 1  
connect  
Please purchase the rest of the necessary cables at your  
local store.  
*Once connections are completed, turn on the TV and  
begin initial setting.  
rear of this unit  
HDMI OUT  
Channel scanning is necessary for the unit to memorize  
DIGITA
AUDIO
all available channels in your area.  
(Refer to “INITIAL SETTING” on page 26.)  
Note  
• For your safety and to avoid damage to the device, please unplug the RF coaxial cable from the ANTENNA IN jack  
before moving the unit.  
• If you use an antenna to receive analog TV, it should also work for DTV reception. Outdoor or attic antennas will be  
more effective than set-top versions.  
• Antenna out is for tuner pass through only. DVD playback through the RF is not possible.  
EN 15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RF MODULATOR CONNECTION  
If your TV has antenna in jack only, it is still possible to connect this unit to your TV by using a commercially available  
stereo audio/video RF modulator. In this case, follow the instructions below.  
1) Disconnect the power cords of the devices from the AC outlet.  
2) Make the connection as illustrated below.  
3) Set your RF modulator’s channel 3/4 switch to either 3 or 4, whichever the TV channel is least used in your area.  
If your RF modulator has a modulator/antenna switch, set it according to the manual supplied with the RF  
modulator.  
4) Plug in the power cords of the devices to the AC outlet.  
5) Turn on your TV and choose the same channel as you set the RF modulator’s channel 3/4 switch to.  
For more details, follow the manual supplied with the RF modulator.  
rear of this unit  
HDMI OUT  
OUT  
DVD/VCR  
DVD/VCR  
S-VIDEO IN ---AUDIO---OUT  
L
L
S-VIDEO  
IN ---AUDIO---OUT  
IN  
ANTENNA  
R
R
IN  
IN ---VIDEO---OUT  
L
VHF / UHF  
antenna  
rear of your TV  
R
IN  
OUT  
IN  
RF coaxial  
cable  
IN ---VIDEO---OUT  
or  
ANTENNA  
cable TV  
company  
RCA audio  
cable  
RCA video  
cable  
RF coaxial cable  
ANT. IN  
R
L
3
4
RF coaxial  
cable  
TO TV  
AUDIO IN VIDEO IN  
CHANNEL  
ANT. IN  
Set channel 3 or 4  
rear of your  
RF modulator  
Supplied cables used in this connection are as follows:  
• RF coaxial cable x 1  
• RCA audio cable (L/R) x 1  
• RCA video cable x 1  
Please purchase the rest of the necessary cables at your local store.  
Note  
• RF modulator is not supplied with this unit. You need to purchase it at your local store.  
• The quality of picture may become poor if this unit is connected to an RF modulator.  
16 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTION TO A CABLE / SATELLITE BOX  
1) Disconnect the power cords of the devices from the AC outlet.  
2) Make the connection as illustrated below.  
3) Plug in the power cords of the devices to the AC outlet.  
S-video cable  
e.g.)  
RCA video cable  
or  
rear of this unit  
RCA audio  
cable  
HDMI OUT  
OUT  
DVD/VCR  
IN --- AUDIO---OUT  
DVD/VCR  
OUT  
IN  
S-VIDEO IN ---AUDIO---OUT  
S-VIDEO  
L
L
IN  
ANTENNA  
R
R
IN  
R
L
S-VIDEO  
OUT  
IN ---VIDEO---OUT  
AUDIO OUT VIDEO OUT  
L
cable/satellite  
box  
ANTENNA  
R
IN  
IN ---VIDEO---OUT  
RF coaxial  
cable  
This connection is  
for TV loop  
through only  
RF coaxial  
cable  
ANT. IN  
RF OUT ANT. IN  
rear of your TV  
satellite  
dish  
RCA audio  
cable  
RCA video  
cable  
RF coaxial  
cable  
or  
R
L
VIDEO IN  
AUDIO IN  
cable TV  
company  
Supplied cables used in this connection are as follows:  
• RF coaxial cable x 1  
• RCA audio cable (L/R) x 1  
• RCA video cable x 1  
Please purchase the rest of the necessary cables at your local store.  
Note  
• Required cables and connecting methods differ depending on the cable/satellite box.  
For more information, please contact your cable/satellite provider.  
• Instead of using video out jack of this unit, you can also use S-VIDEO OUT jack, COMPONENT VIDEO OUT jack or  
HDMI OUT jack (no AUDIO OUT jack connection required) (DVD only) for connecting to your TV.  
With this setup:  
• You can record any unscrambled channel by selecting the channel on the cable/satellite box. Be sure that the  
cable/satellite box is turned on.  
• You cannot record one channel while watching another channel.  
Note to CATV system installer  
• This reminder is provided to call the cable TV system installer’s attention to Article 820-40 of the National Electrical  
Code, which provides guidelines for proper grounding - in particular, specifying that the cable ground shall be  
connected to the grounding system of the building, as close to the point of cable entry as possible.  
EN 17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTION TO A TV  
Make one of the following connections, depending on the capabilities of your existing device.  
VCR and basic DVD connection  
RCA audio  
cable  
TV  
RCA video  
cable  
R
L
VIDEO  
IN  
AUDIO IN  
DVD/VCR  
IN --- AUDIO---OUT  
S-VIDEO  
this unit  
L
L
HDMI OUT  
DVD  
DVD/VCR  
--AUDIO--OUT  
DIGITAL  
AUDIO OUT  
A
UDIO  
S-VIDEO COMPONENT S-VIDEO IN  
-
-
VIDEO OUT  
OUT  
Y
L
L
R
R
IN  
PB  
/CB  
L
R
R
OUT  
IN  
COAXIAL  
IN  
--  
-VIDEO--OUT  
-
PR  
CR  
R
IN ---VIDEO---OUT  
AUDIO OUT (DVD/VCR)  
VIDEO OUT  
Available on DVD only  
TV  
Method 1  
Method 2  
analog audio  
good picture  
better picture  
COMPONENT  
VIDEO IN  
S-VIDEO IN  
Y
(Green)  
PB/CB  
(Blue)  
PR/CR  
(Red)  
R
L
AUDIO IN  
and  
or  
RCA audio cable  
S-video cable  
component video cable  
DVD  
DVD  
DVD  
DIGITAL  
AUDIO OUT  
AUDIO  
OUT  
S-VIDEO COMPONEN
DIGITAL  
AUDIO OUT  
AUDIO  
OUT  
S-VIDEO COMPONENT  
DIGITAL  
AUDIO OUT  
AUDIO  
OUT  
S-VIDEO COMPONENT  
this unit  
VIDEO OU
(Green)  
VIDEO OUT  
VIDEO OUT  
Y
Y
Y
DVD  
UDIO S-VIDEO  
OUT  
(Blue)  
(Red)  
DIGITAL  
A
AUDIO OUT  
Y
P
P
PB  
PB  
L
L
L
L
/C
OUT  
/CB  
OUT  
/CB  
OUT  
COAXIAL  
P
R
COAXIAL  
COAXIAL  
COAXIAL  
PR  
/CR  
PR  
/CR  
PR  
/CR  
R
R
R
S-VIDEO OUT  
COMPONENT  
VIDEO OUTPUT  
AUDIO OUT (DVD)  
Supplied cables used in this connection are as follows:  
• RCA audio cable (L/R) x 1  
• RCA video cable x 1  
Please purchase the rest of the necessary cables at your local store.  
Note  
• Connect this unit directly to the TV. If the RCA audio/video cables are connected to a VCR, pictures may be  
distorted due to the copy protection system.  
• You will not be able to hear the sound being output from DVD if you are not connecting DVD AUDIO OUT when  
you made either S-video or component video out connection.  
• When “Progressive Scan” is set to “ON”, no video signal will be output from the VIDEO OUT or S-VIDEO OUT  
jack.  
To set progressive scan mode, refer to page 90  
• This unit is compatible with the progressive scan system. The feature provides you the higher quality images than the  
traditional output system. To utilize this feature, you must set “Progressive Scan” to “ON”.  
18 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTION TO A TV WITH AN HDMI™ COMPATIBLE PORT  
A simple 1-cable connection with a device having an  
HDMI (high-definition multimedia interface) connector  
HDMI Mode and Actual Output Signals  
Press [HDMI] to select the HDMI output mode. The  
output mode changes as follows every time [HDMI] is  
pressed.  
allows digital transfer of both digital video signals and  
multi-channel audio signals.  
Available for DVD only  
Front Panel Display Video Output Signal  
480 Progressive  
TV  
HDMI IN  
Press [HDMI]  
720 Progressive  
Press [HDMI]  
1080 interlaced  
Press [HDMI]  
HDMI cable  
1080 Progressive  
Press [HDMI]  
HDMI OUT  
this unit  
• The HDMI mode that is not supported by display  
device will be skipped.  
When connecting with an HDMI cable, the audio signal  
will be output as the digital audio signal simultaneously,  
so you do not need the analog audio connection  
described on page 18.  
Cables not included.  
Please purchase the necessary cables at your local  
store.  
Actual Output Modes by Media  
Audio recording format of the disc  
Dolby Digital setting of this unit  
Actual output  
2channel PCM  
Dolby Digital  
PCM  
Dolby Digital  
Stream  
DVD-video  
PCM  
LPCM  
2channel PCM  
Stream  
For audio CD and MP3 files, 2 channel PCM will be output regardless of the “Dolby Digital” setting.  
If the connected device is not compatible with HDMI BITSTREAM, audio will be output as PCM even if you select  
“Stream” in “Dolby Digital” setting (Refer to page 86).  
Copyright protection system  
To play back the digital video images of a DVD via an HDMI connection, it is necessary that both the player and the  
display device (or an AV amplifier) support a copyright protection system called HDCP (high-bandwidth digital  
content protection system). HDCP is copy protection technology that comprises data encryption and authentication  
of the connected AV device. This unit supports HDCP. Please read the operating instructions of your display device  
(or AV amplifier) for more information.  
*HDMI: High Definition Multimedia Interface  
Note  
• Because HDMI is an evolving technology, it is possible that some devices with an HDMI input may not operate  
properly with this unit.  
• When using an HDCP-incompatible display device, the image will not be viewed properly.  
• Among the devices that support HDMI, some devices can control other devices via the HDMI connector; however,  
this unit cannot be controlled by another device via the HDMI connector.  
• The audio signals from the HDMI connector (including the sampling frequency, the number of channels and bit  
length) maybe limited by the device that is connected.  
• Among the monitors that support HDMI, some do not support audio output (for example, projectors). In  
connections with device such as this unit, audio signals are not output from the HDMI output connector.  
• When this unit’s HDMI connector is connected to a DVI-D compatible monitor (HDCP compatible) with an HDMI-  
DVI converter cable, the signals are output in digital RGB.  
• When the power failure occurs, or when you unplug the unit, some problems in the HDMI setting might occur.  
Please check and set the HDMI setting again.  
EN 19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTION TO AN AUDIO SYSTEM  
• When you change the connections, all devices should be turned off.  
• Refer to the manual accompanying external devices for more information.  
2 Channel Analog Audio Connection  
stereo system  
Digital Audio Connection  
Dolby Digital decoder  
audio  
COAXIAL  
digital audio  
coaxial input  
jack  
R
L
AUDIO IN  
analog audio  
input jacks  
digital audio  
coaxial cable  
or  
RCA audio cable  
DVD  
DVD/VCR  
DVD  
DIGITAL  
AUDIO OUT  
AUDIO  
OUT  
S-VIDEO COMPONENT  
S-VIDEO  
IN --- AUDIO---OUT  
DIGITAL  
AUDIO OUT  
AUDIO  
OUT  
S-VIDEO COMPONENT  
VIDEO OUT  
VIDEO OUT  
Y
L
Y
OUT  
IN  
DVD  
DVD/VCR  
DVD  
DVD/VCR  
AUDIO  
OUT  
S-VIDEO COMPONENT S-VIDEO IN --- AUDIO- -OUT  
-
DIGITAL  
AUDIO  
OUT  
S-VIDEO COMPONENT S-VIDEO IN ---AUDIO--OUT  
-
VIDEO OUT  
VIDEO OUT  
AUDIO OUT  
Y
L
L
Y
L
L
PB  
PB  
/CB  
L
R
L
ANTENNA  
OUT  
/CB  
PB  
/CB  
IN  
OUT  
PB  
/CB  
L
R
R
OUT  
IN  
L
R
R
OUT  
IN  
IN ---VIDEO-  
--OUT  
COAXIAL  
IN ---VIDEO- -OUT  
-
PR  
/CR  
PR  
/CR  
COAXIAL  
R
COAXIAL  
R
IN ---VIDEO---OUT  
PR  
/CR  
PR  
/CR  
R
R
this unit  
AUDIO OUT  
DIGITAL AUDIO OUTPUT  
*MD deck or DAT deck can be also connected through coaxial jack.  
Supplied cables used in this connection are as follows:  
• RCA audio cable (L/R) x 1  
Please purchase the rest of the necessary cables at your local store.  
Setting  
Setup >General Setting >Playback >Disc Audio >  
Dolby Digital  
Connection  
If output is Dolby Digital encoded audio, connect to a Dolby  
Digital decoder.  
Stream  
Connecting to an MD deck or DAT deck.  
If not connected to any external devices.  
PCM  
PCM  
* To complete these settings, refer to pages 85-86.  
Note  
• The audio source on a disc in a Dolby Digital multi channel surround format cannot be recorded as digital sound  
by an MD or DAT deck.  
• By connecting this unit to a Dolby Digital decoder, you can enjoy high-quality Dolby Digital multi channel  
surround sound as heard in the movie theaters.  
• Playing back a DVD using incorrect settings may generate noise distortion and may also damage the speakers.  
20 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BEFORE YOU START  
After you have completed all the connections, you must find the viewing channel (external input channel) on your TV.  
Finding the Viewing Channel on Your TV  
After you have made all the  
necessary connections, press  
STANDBY-ON  
1
2
3
[STANDBY-ON y] to turn on the unit.  
SOURCE  
.@/:  
DTV/TV  
DISPLAY OPEN/CLOSE  
A
Turn on your TV.  
• If connected to your VCR make sure it is  
switched off or in standby mode before  
proceeding.  
ABC  
DEF  
1
GHI  
4
2
JKL  
5
3
MNO  
6
PQRS  
TUV  
WXYZ  
7
8
9
CLEAR  
Press “2” on the TV’s remote control,  
then press channel down button  
repeatedly until you see “Initial  
Setup” menu.  
SPACE  
.
0
DISC MENU  
SETUP  
o
Initial Setup  
s
B
OK  
p
TITLE  
RETURN  
OSD Language  
English  
Français  
Español  
j
F
i
B
h
g
C
CHANNEL  
--  
+
This is the correct viewing channel (external  
input channel) for the recorder.  
REC MODE VCR  
DVD  
TIMER  
AUDIO  
• For some TVs, there may be a button on the  
TV’s remote control that accesses the external  
input channel. It may be labeled “SOURCE”,  
“AV”, or “SELECT”. In such case, press it  
repeatedly. Refer to your TV’s user manual for  
details.  
REC  
HDMI  
I
CM SKIP D.DUBBING TIMER SET RAPID PLAY  
SEARCH  
• If more than 10 minutes have passed since you  
have turned on the unit, you may see the  
MAGNAVOX screen saver instead of “Initial  
Setup” menu.  
MAGNAVOX screen saver:  
Input Mode Names for Common TV Brands (Example)  
Admiral AUX  
Panasonic TV/VIDEO  
RCA INPUT, TV/VCR,  
Curtis  
LINE1, LINE2,  
00, 90, 91, 92, 93  
Mathis  
00, 90, 91, 92, 93  
GE  
INPUT, TV/VCR, Samsung TV/VIDEO  
00, 90, 91, 92, 93  
Hitachi  
JVC  
INPUT, AUX  
VIDEO, VIDEO 1, Sharp  
VIDEO 2, VIDEO 3  
Sanyo  
VIDEO  
00  
Kenwood AUX  
Sony  
VIDEO1, VIDEO2,  
VIDEO3  
Proceed to step 2 in “INITIAL  
SETTING” on page 26.  
LXI-Series 00  
Magnavox AUX CHANNEL  
Toshiba  
Zenith  
TV/GAME  
00  
4
Note  
• Video input selection varies for different brand’s  
models of TVs.  
• Consult your TV manufacturer if none of the above is  
successful.  
EN 21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BEFORE YOU START  
This unit uses the following on-screen displays and menus to guide you to the easy operations.  
The on-screen displays give you the information on the loaded disc, the disc/file in playback, or the HDMI status, etc.  
The menus allow you to change the various kinds of settings for playing back, recording, or editing to suit your preference.  
Guide to On-Screen Display / Menu  
The on-screen display changes in the following order  
Disc Information / Menu  
as you press [DISPLAY].  
DVD mode  
6
OFF  
1/  
5
1/  
5
0:01:00 / 1:23:45  
-RW  
DTV Program Guide (only in DTV mode)  
CH 10  
Disc Information/Menu (only in DVD mode)  
5
1
2
or  
VCR Information (only in VCR mode)  
SP(2Hr)  
1h53m  
Title Name Information (only in DVD mode)  
4
3
(only when DVD+RW/DVD+R/DVD-RW/DVD-R  
is in playback)  
* This is an example screen only for explanation.  
Displayed items vary depending on the disc you  
inserted.  
or  
File Name Information (only in CD mode)  
(only when a CD with MP3 files is in playback)  
1. Indicates a disc type.  
2. Indicates a channel number or selected external input  
channel.  
3. Indicates a recording mode and possible recording  
MP3 Tag Information  
(only when an MP3 file is in playback)  
time left.  
HDMI Information  
(only for the images output through the HDMI output)  
4. Indicates an operation status.  
5. Each icon means:  
: Search  
: Audio  
: Subtitle  
: Angle  
: Marker  
: Noise Reduction  
: Zoom  
DTV Program Guide  
1
2
3
4
5
6
7
8
PROGRAM TITLE NAME  
123.45  
: Surround  
WLIW-DT  
ENGLISH  
90  
TV-PG  
: Repeat  
INFORMATION-1  
INFORMATION-2  
INFORMATION-3  
INFORMATION-4  
INFORMATION-5  
INFORMATION-6  
6. Indicates the current title number/total number of  
titles, the current chapter number/total number of  
chapters, and time lapse of the current title playback/  
total duration of the title.  
1. Program title (max. 2 lines displayed)  
2. Closed Caption (Indicates that the program being  
broadcast is available with closed captioning.)  
3. Signal strength (Indicates the signal strength of the  
current channel.)  
4. Program guide (max. 6 lines displayed)  
5. Channel number  
6. Broadcast station  
7. Audio language (“Other” is displayed when the  
audio language cannot be acquired, or the acquired  
languages are other than English, Spanish or French.)  
8. Program rating  
Note  
• When the program guide is displayed in more than 7  
lines, use [K / L] to scroll.  
• “No description provided.” is displayed when the  
program guide is not provided.  
22 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BEFORE YOU START  
VCR Information  
MP3 Tag Information  
VCR mode  
• First, track name will be displayed.  
1
Track Name  
12:00AM  
CH 21  
Stereo  
2
3
• If you press [DISPLAY] one more time, artist name will  
be displayed.  
Artist Name  
SP  
0:00:00  
HIFI  
4
5
6
• If you press [DISPLAY] one more time, album name  
* This is an example screen only for explanation.  
Displayed items vary depending on the cassette tape  
you inserted.  
will be displayed.  
Album Name  
• If there is no artist, track or album name, “Not Available”  
will be displayed.  
1. Indicates current video status.  
2. Indicates the current time.  
3. Indicates a current channel number (or selected  
external input channel) and an audio status of the  
program.  
HDMI Information  
4. Indicates a recording or playing back mode.  
5. Indicates a tape counter.  
6. Audio status of the current cassette tape.  
1
2
Video Info.  
Audio Info.  
:
:
480p  
Bitstream  
/
YCbCr  
Title/File Name Information  
3
Title Name Information  
Title Name  
My Title  
4
File Name Information  
*1. Indicates the resolution of the HDMI output image.  
*2. Indicates the HDMI video format.  
*3. Indicates the HDMI audio format.  
4. Indicates current disc status.  
File Name  
My File  
* “- - -” will be displayed, when it does not have any  
information.  
EN 23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BEFORE YOU START  
Main Menu  
Press [SETUP] to display the main menu. Then use  
[K / L] to select a menu and press [OK] to display the  
menu. These menus provide entries to all main functions  
of the unit.  
1. General Setting:  
To go to general setting menu.  
2. Timer Programming:  
To program a timer recording.  
3. Title List:  
To call up the title list.  
4. Disc Edit:  
To set up the DVD setting.  
5. CD Playback Mode:  
To set up the CD playback setting.  
• “CD Playback Mode” is available only when an audio  
CD, a video CD, a CD-RW/-R with MP3 files is inserted  
into the unit.  
Setup  
General Setting  
Timer Programming  
Title List  
Disc Edit  
CD Playback Mode  
General Setting Menu  
1. Playback:  
To set up the unit to play back discs as you prefer.  
2. Display:  
To set up the OSD screen as you prefer.  
3. Video:  
To set up the video setting.  
4. Recording:  
General Setting  
1
2
3
4
5
26  
37  
8
Playback  
Display  
Video  
Recording  
Clock  
Channel  
HDMI  
Parental Lock  
Disc Audio  
Disc Menu Language  
Audio Language  
Subtitle Language  
Angle Icon  
Reset All  
Still Mode  
To set up the unit to record to discs as you prefer.  
5. Clock:  
To set up the clock of the unit as you need.  
6. Channel:  
To adjust the channel setting of the unit as you prefer.  
7. HDMI:  
To set up the HDMI connection setting.  
8. Reset All:  
To reset the setting to the factory default.  
Disc Edit / CD Playback Mode  
1. Edit Disc Name:  
<Disc Edit menu (DVD+RW)>  
Allows you to rename the disc.  
Disc Edit  
1
2. Erase Disc: (DVD+RW/DVD-RW only)  
Allows you to erase all contents in the disc and format it.  
3. Make Edits Compatible: (DVD+RW only)  
Allows you to memorize the editing status on the disc if  
you have added or deleted chapters, or made chapters  
hidden on this unit, and to effect it when playing back  
on the other unit.  
Finalize: (DVD+R/DVD-RW/-R only)  
Allows you to finalize a disc containing recorded titles.  
4. Disc Protect :  
Allows you to protect a disc from accidental editing or  
recording.  
5. Random Play:  
Allows you to activate the random playback feature.  
6. Program Play: (audio CD/video CD only)  
Allows you to activate the program playback feature.  
7. PBC (Video CD only):  
Allows you to select images or information on the menu  
screen by activating PBC (playback control) function.  
Edit Disc Name  
Erase Disc  
Make Edits Compatible  
2
3
4
Disc Protect OFF  
ON  
<Disc Edit menu (DVD-RW)>  
Disc Edit  
1
2
3
4
Edit Disc Name  
Erase Disc  
Finalize  
Disc Protect OFF  
ON  
<Disc Edit menu (DVD+R/DVD-R)>  
Disc Edit  
1
23  
34  
Edit Disc Name  
Finalize  
Disc Protect OFF  
ON  
<CD Playback Mode menu>  
CD Playback Mode  
15  
26  
37  
Random Play  
Program Play  
PBC (Video CD only)  
24 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BEFORE YOU START  
Switching DVD / VCR Mode  
Because this product is a combination of a VCR and a DVD recorder, you must select first which component you wish  
to operate.  
DVD mode  
VCR mode  
Press [SOURCE] on the front panel, or press [DVD] on the Press [SOURCE] on the front panel, or press [VCR] on the  
remote control.  
remote control.  
(Verify that the DVD indicator is lit.)  
(Verify that the VCR indicator is lit.)  
STANDBY-ON  
SOURCE  
DTV/TV  
DISPLAY OPEN/CLOSE  
A
.@/:  
ABC  
DEF  
1
GHI  
4
2
JKL  
5
3
MNO  
6
PQRS  
TUV  
WXYZ  
7
8
SPACE  
9
CLEAR  
.
0
DISC MENU  
SETUP  
o
s
B
OK  
p
TITLE  
RETURN  
j
F
i
C
B
h
g
DVD indicator  
SOURCE button  
VCR indicator  
VCR button  
DVD button  
CHANNEL  
--  
+
REC MODE VCR  
DVD  
TIMER  
AUDIO  
REC  
HDMI  
I
CM SKIP D.DUBBING TIMER SET RAPID PLAY  
SEARCH  
Note  
• You cannot switch the mode while in the timer-standby mode.  
How to Insert a Disc / Cassette Tape  
How to Insert a Disc  
How to Insert a Cassette Tape  
1) Press [DVD].  
1) Press [VCR].  
2) Press [OPEN/CLOSE A] to open the disc tray.  
2) Insert a cassette tape as illustrated below.  
3) Place the disc on the disc tray with its label side  
facing up.  
4
HEAD HI-FI STEREO  
Cassette compartment  
Align the disc to  
the disc tray guide.  
• Insert from the flap side first with the window side  
facing up.  
To eject the cassette tape:  
4) Press [OPEN/CLOSE A] to close the disc tray.  
It may take a while to load  
the disc.  
Press [STOP/EJECT  
C
A] on the front panel or press  
[OPEN/CLOSE A] on the remote control.  
To eject the disc:  
Press [OPEN/CLOSE A] to open the disc tray, then  
remove the disc before turning off the unit.  
Note  
• If you turn off this unit, [OPEN/CLOSE A] on the remote control is not available.  
Be sure to use [OPEN/CLOSE A] or [STOP/EJECT  
C
A] on the unit.  
EN 25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INITIAL SETTING  
You need to follow these steps when you turn on this unit for the first time.  
Follow the procedure in “Finding the  
Viewing Channel on Your TV” on  
page 21 to display the “Initial Setup”  
menu.  
STANDBY-ON  
1
2
SOURCE  
.@/:  
DTV/TV  
DISPLAY OPEN/CLOSE  
A
Use [K / L] to select your desired  
language, then press [OK].  
Initial Setup  
ABC  
DEF  
1
GHI  
4
2
JKL  
5
3
MNO  
6
PQRS  
TUV  
WXYZ  
OSD Language  
English  
Français  
Español  
7
8
9
CLEAR  
SPACE  
.
0
DISC MENU  
SETUP  
Use [K / L] to select the type of  
broadcasting signal, then press [OK].  
o
3
s
B
OK  
p
Initial Setup  
TITLE  
RETURN  
Channel Preset  
Make sure the antenna is  
connected to “ANTENNA IN” jack.  
j
F
i
B
Antenna  
Cable (Analog)  
h
g
C
Cable (Analog / Digital)  
CHANNEL  
The unit will start getting channels available in  
your area.  
--  
+
REC MODE VCR  
DVD  
TIMER  
AUDIO  
Antenna:  
(When using antenna)  
REC  
HDMI  
The channels broadcasted in analog TV and  
digital TV are automatically scanned and  
memorized. Only the receivable channels in the  
area will be memorized.  
I
CM SKIP D.DUBBING TIMER SET RAPID PLAY  
SEARCH  
Cable (Analog):  
(When using basic cable)  
The channels broadcasted in analog CATV are  
automatically scanned and memorized.  
Cable (Analog / Digital):  
(When using basic cable)  
The channels broadcasted in analog CATV and  
digital CATV are automatically scanned and  
memorized.  
CH  
1
Auto Presetting Now  
Press [OK] to activate “Clock Setting”.  
Initial Setup  
4
5
Clock Setting  
- - -  
/
- -  
/
- - - - ( - - - )  
- - - - - -  
:
Proceed to step 5 in “Manual Clock  
Setting” on page 31.  
• If a PBS (public broadcasting station) is  
available in your area, follow “Auto Clock  
Setting” on page 30.  
26 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CHANNEL SETTING  
If you have changed antenna connection, we recommend that you program available channels in your area with the  
following procedures.  
Auto Channel Scan  
Press [SETUP] and use [K / L] to  
select “General Setting”, then press  
STANDBY-ON  
1
[OK].  
SOURCE  
.@/:  
DTV/TV  
DISPLAY OPEN/CLOSE  
“General Setting” menu will appear.  
A
ABC  
DEF  
Use [K / L] to select “Channel”, then  
press [OK].  
“Channel” menu will appear.  
1
GHI  
4
2
JKL  
5
3
MNO  
6
2
3
4
PQRS  
TUV  
WXYZ  
7
8
9
CLEAR  
Use [K / L] to select “Auto Channel  
Preset”, then press [OK].  
SPACE  
.
0
DISC MENU  
SETUP  
o
Use [K / L] to select the type of  
broadcasting signal, then press [OK].  
s
B
OK  
p
TITLE  
RETURN  
Auto Channel Preset  
Antenna  
Cable (Analog)  
Cable (Analog / Digital)  
j
F
i
B
h
g
C
CHANNEL  
The unit will start getting channels available in  
your area.  
--  
+
• When aerial antenna is connected, select  
“Antenna”.  
• When connected to CATV, select “Cable  
(Analog)” or “Cable (Analog/Digital)”.  
To cancel the auto channel preset during  
scanning:  
REC MODE VCR  
DVD  
TIMER  
AUDIO  
REC  
HDMI  
I
CM SKIP D.DUBBING TIMER SET RAPID PLAY  
SEARCH  
Press [RETURN] or [SETUP] to cancel.  
When scanning is over, press [SETUP]  
to exit.  
5
To cycle through only the memorized channels, use  
[CHANNEL  
/
].  
To select a channel directly (including the ones not  
memorized), use [the Number buttons] and [ • ] (for  
digital TV channels).  
Note  
• If the auto channel preset is canceled during  
presetting, some channels not yet preset may not be  
received.  
• You cannot change the channel when either VCR or  
DVD is in any recording mode (basic recording, one-  
touch timer recording or timer recording).  
EN 27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CHANNEL SETTING  
Adding / Deleting Channels  
You may want to add or delete TV channels if your  
channel lineup changes or if you no longer watch some  
channels.  
Adding channel is only available for the analog TV  
channels.  
Press [DTV/TV] to select the mode  
(DTV or TV) to/from which you want  
to add/delete channels.  
1
2
Make sure  
Press [SETUP] and use [K / L] to  
select “General Setting”, then press  
• You perform “Auto Channel Scan” before adding or  
deleting the channels.  
[OK].  
“General Setting” menu will appear.  
STANDBY-ON  
Use [K / L] to select “Channel”, then  
press [OK].  
“Channel” menu will appear.  
SOURCE  
.@/:  
DTV/TV  
DISPLAY OPEN/CLOSE  
A
3
ABC  
DEF  
1
GHI  
4
2
JKL  
5
3
MNO  
6
Use [K / L] to select “Manual Channel  
Preset”, then press [OK].  
4
PQRS  
TUV  
WXYZ  
Auto Channel Preset  
Manual Channel Preset  
TV Audio Select  
7
8
SPACE  
9
CLEAR  
.
0
• If you are adding or deleting analog TV/CATV  
DISC MENU  
SETUP  
channels, go to  
to continue.  
ANALOG  
o
• If you are deleting digital TV/CATV channels, go  
to to continue.  
DIGITAL  
s
B
OK  
p
TITLE  
RETURN  
j
F
i
B
h
g
C
CHANNEL  
--  
+
REC MODE VCR  
DVD  
TIMER  
AUDIO  
REC  
HDMI  
I
CM SKIP D.DUBBING TIMER SET RAPID PLAY  
SEARCH  
28 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CHANNEL SETTING  
ANALOG  
DIGITAL  
Select the channel number to add or  
delete.  
Select the channel number to delete.  
• Only the major channel is displayed in “Manual  
Channel Preset” menu. (The channel number  
displayed in the parenthesis is a virtual channel  
number)  
• Use [CHANNEL  
/
] to cycle through only  
5
6
5
the memorized channels.  
• Use [{ / B] to cycle through all the channels  
including the ones not memorized.  
• Use [the Number buttons] to select a channel  
directly.  
• When a memorized channel is selected, “Add”  
is checked and highlighted as a default.  
• When an unmemorized channel is selected  
“Delete” is checked and highlighted as a  
default.  
• Use [CHANNEL  
/
] to cycle through only  
the memorized channels.  
• You cannot use [{ / B] for the digital TV  
channel selection.  
• Use [the Number buttons] to select a channel  
directly.  
• When a memorized channel is selected, “Add”  
is checked and highlighted as a default.  
• When an unmemorized channel is selected  
“Delete” is checked and highlighted as a  
default.  
Use [K / L] to select “Add” or  
“Delete”, then press [OK].  
Manual Channel Preset  
Use [K / L] to select “Delete”, then  
press [OK]. Then select the next  
channel to delete.  
6
CH  
2
Add  
Delete  
• If the setting is complete, press [RETURN] to  
activate “Manual Channel Preset”.  
Manual Channel Preset  
Your setting will be activated and it will  
automatically switch to the next channel so that  
you can continue adding or deleting channels.  
DTV  
2
(CH - - - )  
Add  
Delete  
Press [SETUP] to exit.  
Your setting will be activated.  
7
WARNING:  
• For the digital TV channels, you cannot recover the  
deleted channels once they are deleted unless you  
perform the auto channel preset again.  
Press [SETUP] to exit.  
7
EN 29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETTING THE CLOCK  
Set the clock before you try the timer programming. If a PBS (public broadcasting station) is available in your area,  
follow “Auto Clock Setting” below. If not, follow “Manual Clock Setting” on page 31.  
Auto Clock Setting  
This unit can set the time and date automatically by  
Press [SETUP] and use [K / L] to  
select “General Setting”, then press  
referring to a PBS station.  
Make sure  
1
2
3
4
[OK].  
• The antenna/cable TV connections are correct.  
• Channels are set. (Refer to page 27.)  
• If this unit is connected to a cable/satellite box,  
select the local PBS station on them to set the clock  
automatically.  
“General Setting” menu will appear.  
Use [K / L] to select “Clock”, then  
press [OK].  
“Clock” menu will appear.  
STANDBY-ON  
Use [K / L] to select “Auto Clock  
Setting”, then press [OK].  
SOURCE  
.@/:  
DTV/TV  
DISPLAY OPEN/CLOSE  
A
ABC  
DEF  
Use [K / L] to select “Auto”, then  
press [OK].  
1
GHI  
4
2
JKL  
5
3
MNO  
6
Auto Clock Setting  
PQRS  
TUV  
WXYZ  
7
8
SPACE  
9
CLEAR  
OFF  
Auto  
Manual  
.
0
DISC MENU  
SETUP  
o
Press [SETUP] to exit.  
s
B
OK  
p
TITLE  
RETURN  
5
6
Press [STANDBY-ON y] to turn off  
j
F
i
B
the unit.  
This unit will search for the time only when the  
power is off. Leave it off for several minutes to  
give this unit time to set the clock.  
h
g
C
CHANNEL  
--  
+
REC MODE VCR  
DVD  
TIMER  
AUDIO  
REC  
HDMI  
I
If the unit chooses an incorrect PBS channel, set the PBS  
channel manually by following the steps below.  
CM SKIP D.DUBBING TIMER SET RAPID PLAY  
SEARCH  
Select “Manual” at step 4, then press  
[OK].  
1
Use [the Number buttons] or [K / L]  
to enter your PBS channel number,  
then press [OK].  
Set Channel No.  
2
3
CH  
1
Note  
• The clock may set itself automatically after you  
connect the antenna/cable signal and plug in the  
power cord.  
Press [SETUP] and turn off the unit.  
• Only the analog PBS channel signal is effective for  
auto clock setting.  
• The unit receives the clock data at 12:00 a.m. / p.m.  
from the PBS channel when the power is off.  
30 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETTING THE CLOCK  
Manual Clock Setting  
Daylight Saving Time  
When “Daylight Saving Time” is “ON”, the unit clock will  
automatically adjust the time in order to fit the daylight  
saving time.  
Press [SETUP] and use [K / L] to  
select “General Setting”, then press  
“ON (MAR - NOV)” has been selected as the default.  
1
[OK].  
“General Setting” menu will appear.  
Press [SETUP] and use [K / L] to  
select “General Setting”, then press  
Use [K / L] to select “Clock”, then  
press [OK].  
“Clock” menu will appear.  
1
[OK].  
2
3
4
“General Setting” menu will appear.  
Use [K / L] to select “Clock Setting”,  
then press [OK].  
Use [K / L] to select “Clock”, then  
press [OK].  
“Clock” menu will appear.  
2
3
4
Use [K / L] to select calendar or time,  
then press [OK].  
Use [K / L] to select “Daylight Saving  
Time”, then press [OK].  
Clock Setting  
JAN / 01 / 2008 ( TUE )  
12 : 00 AM  
Use [K / L] to select “ON (MAR -  
NOV)”, “ON (APR - OCT)” or “OFF”,  
then press [OK].  
Use [{ / B] to select an item to set,  
and use [K / L] to select the contents  
to suit your preference, then press  
[OK] when you finish setting all the  
contents.  
Daylight Saving Time  
5
ON (MAR - NOV)  
ON (APR - OCT)  
OFF  
ON (MAR - NOV):  
Clock Setting  
Move forward one hour on the second Sunday in  
March and move back one hour on the first  
Sunday in November.  
JAN / 01 / 2008 ( TUE )  
12 : 00 AM  
Your setting will be activated.  
The clock start counting when you press [OK].  
ON (APR - OCT):  
Move forward one hour on the first Sunday in  
April and move back one hour on the last  
Sunday in October.  
Press [SETUP] to exit.  
Press [SETUP] to exit.  
6
5
Note  
• Your setting will be canceled if you press [RETURN]  
before pressing [OK] at step 5.  
• Your clock setting will be lost if either there is a power  
failure or this unit has been unplugged for more than  
30 seconds when you set the clock manually.  
• For setting the day, year, hour, and minute,  
[the Number buttons] can also be used.  
• You can set the built-in calendar from the year 2008  
up to 2057.  
EN 31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TUNER SETTINGS  
<Digital TV Channels>  
Switching Analog Mode /  
Enter the major and minor channel number with [the  
Number buttons] to select a channel you want to watch.  
For 1-digit number  
Digital Mode  
You can easily switch the analog TV (NTSC) and digital TV  
(ATSC) with the remote control.  
e.g.) 2-2 ch:  
major channel  
minor channel  
[0] + [2] or [2] + [•]  
[0] + [2], [2] + [•] or  
Press [DTV/TV] on the remote control.  
• The analog mode and digital mode switch alternately.  
[2] + leave it for 2 seconds.  
For 2-digit number  
e.g.) 35-16ch:  
major channel  
minor channel  
• If you enter 1 digit for major channel and leave it for 2  
seconds, the number will be taken as the major channel  
and lowest minor channel of the major channel will be  
displayed.  
[3] + [5]  
[1] + [6]  
Note  
• When you switch the analog mode to the digital  
mode, it may take about 10 seconds until the digital  
channel selection is completed. The following screen  
is displayed while switching the mode.  
• If there is no minor channel input, lowest minor channel  
of the major channel will be displayed.  
DTV 125. 1  
Note  
Now Scanning  
• It may take up to 5 to 7 seconds to switch the digital  
TV channels.  
• In digital TV broadcasting, 2 or more channels, called  
minor channels, are simultaneously broadcast on one  
main channel, called major channel.  
About digital TV broadcasting:  
Channel Selection  
With its high definition broadcast, digital broadcasting far  
surpasses analog broadcasting in both its picture and  
sound quality.  
Select channels by using [CHANNEL  
Number buttons] found on remote control.  
/
] or [the  
What is the minor channel?  
[CHANNEL  
/
]
By using high compression technology, digital  
broadcasting offers a service that enables multiple signals  
to send simultaneously.  
Therefore, you can select more than one program per  
major channel since digital broadcasting technology  
distinguishes between multiple channels broadcast by a  
single network.  
Use [CHANNEL  
/
] to change the channel.  
[the Number buttons]  
Press the channel number with [the Number buttons] to  
select a channel you want to watch.  
<Analog TV Channels>  
Enter the channel number with [the Number buttons] to  
select a channel you want to watch.  
For 1-digit number  
[Air Time]  
NTSC (analog mode)  
ATSC (digital mode)  
18:00  
18:30  
19:00  
19:30  
20:00  
smallest smallest  
CH4-1  
e.g.) 2 ch:  
[0] + [2], [2] + [•] or  
CH  
CH  
[2] + leave it for 2 seconds.  
For 2-digit number  
CH4-1 CH4-2 CH4-3  
e.g.) 12ch:  
[1] + [2]  
CH4  
smallest  
CH  
CH4-1  
CH4-3  
smallest  
CH  
CH4-1 CH4-2  
minor channel  
major channel  
: change automatically  
: change manually by using [CHANNEL  
/
]
32 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TUNER SETTINGS  
This section describes how to switch the TV audio. When you record a TV program, only the audio selected here will be  
recorded.  
Selecting TV Audio  
Digital TV  
Press [AUDIO] to cycle through  
STANDBY-ON  
available audio languages.  
English 1/2  
1
SOURCE  
.@/:  
DTV/TV  
DISPLAY OPEN/CLOSE  
A
ABC  
DEF  
1
GHI  
4
2
JKL  
5
3
MNO  
6
PQRS  
TUV  
WXYZ  
7
8
SPACE  
9
CLEAR  
• When you press [AUDIO], selected language  
will be displayed on the TV screen.  
.
0
DISC MENU  
SETUP  
• Every time you press [AUDIO], the language  
will be switched.  
o
e.g.) English 1/3 ➔ Spanish 2/3 ➔ Other 3/3  
s
B
OK  
p
• Available languages differ depending on the  
broadcast.  
TITLE  
RETURN  
• The language information display will  
automatically disappear.  
• When you record digital TV broadcasting, the  
audio language you have selected will be  
recorded.  
j
F
i
B
h
g
C
CHANNEL  
--  
+
REC MODE VCR  
DVD  
TIMER  
AUDIO  
REC  
HDMI  
I
CM SKIP D.DUBBING TIMER SET RAPID PLAY  
SEARCH  
Note  
• You cannot change the audio language for the timer  
recording of digital TV broadcasting.  
• Pressing [AUDIO] does not control external device  
audio.  
• When there is only one audio channel on the  
broadcast, pressing [AUDIO] does not display  
anything.  
EN 33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TUNER SETTINGS  
Selecting TV Audio (cont’d)  
Analog TV  
Press [SETUP] and use [K / L] to  
STANDBY-ON  
select “General Setting”, then press  
1
[OK].  
SOURCE  
.@/:  
DTV/TV  
DISPLAY OPEN/CLOSE  
“General Setting” menu will appear.  
A
ABC  
DEF  
1
GHI  
4
2
JKL  
5
3
MNO  
6
Use [K / L] to select “Channel”, then  
press [OK].  
“Channel” menu will appear.  
2
3
4
PQRS  
TUV  
WXYZ  
7
8
SPACE  
9
CLEAR  
Use [K / L] to select “TV Audio  
Select”, then press [OK].  
.
0
DISC MENU  
SETUP  
o
Use [K / L] to select “Stereo” or  
“SAP”, then press [OK].  
s
B
OK  
p
TITLE  
RETURN  
TV Audio Select  
j
F
i
B
Stereo  
SAP  
h
g
C
Stereo:  
CHANNEL  
Outputs main-audio.  
SAP (secondary audio program):  
Outputs sub-audio.  
--  
+
REC MODE VCR  
DVD  
TIMER  
AUDIO  
REC  
HDMI  
I
Press [SETUP] to exit.  
CM SKIP D.DUBBING TIMER SET RAPID PLAY  
SEARCH  
5
Note on recording analog TV audio  
• When you record an analog TV program available in  
second audio or stereo, you have to select either  
“Stereo” or “SAP” in “General Setting” menu  
beforehand. Refer to the following table to check an  
appropriate setting.  
Selected  
audio  
Broadcast  
audio  
Disc  
Audio  
recording  
output  
Stereo  
STEREO+SAP  
STEREO  
STEREO  
STEREO  
MONO  
MONO  
SAP  
STEREO  
STEREO  
MONO  
MONO  
SAP  
MONO+SAP  
MONO  
SAP  
STEREO+SAP  
STEREO  
STEREO  
SAP  
STEREO  
SAP  
MONO+SAP  
MONO  
MONO  
MONO  
34 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TUNER SETTINGS  
DTV Closed Caption  
Digital TV  
Digital TV has its own closed captions called DTV CC. Use this menu to change the settings for DTV CC.  
Press [SETUP] and use [K / L] to  
select “General Setting”, then press  
STANDBY-ON  
1
[OK].  
“General Setting” menu will appear.  
SOURCE  
.@/:  
DTV/TV  
DISPLAY OPEN/CLOSE  
A
ABC  
DEF  
Use [K / L] to select “Display”, then  
press [OK].  
1
GHI  
4
2
JKL  
5
3
MNO  
6
2
PQRS  
TUV  
WXYZ  
Use [K / L] to select “DTV CC”, then  
press [OK].  
7
8
9
CLEAR  
SPACE  
.
0
3
DISC MENU  
SETUP  
OSD Language  
Screen Saver  
FL Dimmer  
DTV CC  
CC Style  
V-Chip  
o
s
B
OK  
p
TITLE  
RETURN  
j
F
i
B
Use [K / L] to select “Caption  
Service”, then press [OK].  
h
g
C
4
5
DTV CC  
CHANNEL  
--  
+
Caption Service  
Recording  
REC MODE VCR  
DVD  
TIMER  
AUDIO  
REC  
HDMI  
Use [K / L] to the desired DTV closed  
caption, then press [OK].  
I
CM SKIP D.DUBBING TIMER SET RAPID PLAY  
SEARCH  
Caption Service  
OFF  
Service1  
Service2  
Service3  
Service4  
Service5  
Service6  
OFF:  
Select if you do not want DTV CC. This is the  
default.  
Service 1 to Service 6:  
Select one of these before changing any other  
item in the closed caption menu. Choose  
“Service 1” under normal circumstances.  
Press [SETUP] to exit.  
6
EN 35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TUNER SETTINGS  
Closed Caption Style  
Digital TV  
Digital TV can also change the style of its closed caption such as font, color or size, etc.  
Press [SETUP] and use [K / L] to  
STANDBY-ON  
select “General Setting”, then press  
1
[OK].  
SOURCE  
.@/:  
DTV/TV  
DISPLAY OPEN/CLOSE  
“General Setting” menu will appear.  
A
ABC  
DEF  
1
GHI  
4
2
JKL  
5
3
MNO  
6
Use [K / L] to select “Display”, then  
press [OK].  
2
PQRS  
TUV  
WXYZ  
7
8
SPACE  
9
CLEAR  
Use [K / L] to select “CC Style”, then  
press [OK].  
.
0
DISC MENU  
SETUP  
3
o
OSD Language  
Screen Saver  
FL Dimmer  
DTV CC  
CC Style  
V-Chip  
s
B
OK  
p
TITLE  
RETURN  
j
F
i
B
Use [K / L] to select “User Setting”,  
h
g
C
then press [OK].  
CC Style  
CHANNEL  
4
5
--  
+
User Setting  
Font Size  
Font Style  
Font Opacity  
Font Color  
Edge Type  
Edge Color  
Back Opacity  
Back Color  
REC MODE VCR  
DVD  
TIMER  
AUDIO  
REC  
HDMI  
I
CM SKIP D.DUBBING TIMER SET RAPID PLAY  
SEARCH  
Use [K / L] to select “ON”, then press  
[OK].  
User Setting  
ON  
OFF  
36 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TUNER SETTINGS  
<Edge Type>  
Edge type of the displayed caption can be  
switched as below.  
Use [K / L] to select the item and  
switch the setting for each item you  
want to set, then press [OK].  
6
Edge Type  
• When “User Setting” is set to “ON”, you can set  
the following items. CC style set by “User  
Setting” will be displayed.  
None  
Raised  
Depressed  
Uniform  
L.Shadow  
R.Shadow  
• The setting description for each item is shown  
below.  
<Font Size>  
Font size of the displayed caption can be  
switched as below.  
<Edge Color>  
Edge color of the displayed caption can be  
switched as below.  
Font Size  
Edge Color  
Large  
Middle  
Small  
White  
Black  
Red  
Green  
Blue  
<Font Style>  
Yellow  
Magenta  
Cyan  
Font style of the displayed caption can be  
switched as below.  
Font Style  
<Back Opacity>  
Background opacity of the displayed caption can  
be switched as below.  
Style1  
Style2  
Style3  
Style4  
Style5  
Style6  
Style7  
Style8  
Back Opacity  
Solid  
Transparent  
Translucent  
Flash  
<Font Opacity>  
Font opacity of the displayed caption can be  
<Back Color>  
Background color of the displayed caption can  
be switched as below.  
switched as below.  
Font Opacity  
Solid  
Back Color  
Transparent  
Translucent  
Flash  
White  
Black  
Red  
Green  
Blue  
<Font Color>  
Yellow  
Magenta  
Cyan  
Font color of the displayed caption can be  
switched as below.  
Font Color  
White  
Black  
Red  
Press [SETUP] to exit.  
Green  
Blue  
Yellow  
Magenta  
Cyan  
7
EN 37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INFORMATION ON DVD RECORDING  
Before you make a recording, read the following information.  
Recordable Discs  
Recording Mode  
This unit can record to DVD+RW, DVD+R, DVD-RW and  
DVD-R.  
DVD+R/DVD-R can only be recorded to once. DVD+RW/  
DVD-RW can be recorded to and erased many times.  
DVD-RW/-R will be recorded in the DVD+VR mode  
automatically in this unit.  
You can select a recording mode among 6 options, and  
the recording time will depend on the recording mode  
you select as follows.  
Recording Recording  
Video/sound  
quality  
Disc size  
8cm Disc  
mode  
time  
18 min  
36 min  
(good)  
HQ (1Hr)  
SP (2Hr)  
Logo  
Attributes  
SPP (2.5Hr) 45 min  
LP (3Hr)  
EP (4Hr)  
SLP (6Hr)  
HQ (1Hr)  
SP (2Hr)  
54 min  
72 min  
8cm/12cm, single-sided,  
single layer disc  
Approx. max. recording time  
(SLP mode):  
(poor)  
(good)  
108 min  
60 min  
DVD+RW  
DVD+R  
120 min  
360 minutes (4.7GB) (for 12cm)  
108 minutes (1.4GB) (for 8cm)  
SPP (2.5Hr) 150 min  
12cm Disc  
LP (3Hr)  
EP (4Hr)  
SLP (6Hr)  
180 min  
240 min  
360 min  
DVD-RW  
DVD-R  
(poor)  
• Following discs are recommended for good recording  
quality and are proven to be compatible with this unit.  
However, depending on the media condition the unit  
may not read the disc properly.  
• The recording time is only an estimate. The actual  
recording time may differ.  
• The audio and video quality gets poorer as the recording  
time becomes longer.  
• Each time [REC MODE] is pressed, recording mode and  
its allowed recording time will be displayed.  
Verbatim  
DVD+R 8x,  
DVD-R 8x,  
DVD-RW 4x  
DVD+RW 4x,  
DVD-RW 2x  
JVC  
Maxell  
SONY  
TDK  
DVD+R 4x/8x/16x, DVD-R 8x/16x  
DVD+R 4x/8x/16x, DVD+RW 4x  
DVD+R 4x/8x/16x  
Note  
• This unit cannot record to CD-RW or CD-R.  
Performance of any other discs are not guaranteed.  
• All high definition pictures will be down converted to  
the standard definition pictures when they are  
recorded on this unit.  
• DVD+RW/+R, DVD-RW/-R and CD-RW/-R recorded on  
a personal computer or a DVD or CD recorder may  
not be played back if the disc is damaged or dirty or  
if there is condensation on the player’s lens.  
• If you record a disc using a personal computer, even  
if it is recorded in a compatible format it may not be  
played back because of the settings of the  
application software used to create the disc. (Check  
with the software publisher for more detailed  
information.)  
• Since the recording is made by the VBR (variable bit  
rate) method, depending on the picture you are  
recording, the actual remaining time for recording  
may be a little shorter than the remaining time  
displayed on the TV screen.  
• You can play back DVD+RW on most DVD players  
without finalizing. However, if you have added or  
deleted chapters, or made chapters hidden, you  
must perform “Make Edits Compatible” before being  
able to see those effects on other units. (Refer to  
page 80 for more details.) To play back discs other  
than DVD+RW on other DVD players, you will need  
to finalize.  
Unrecordable Discs  
• DVD-RW recorded in the mode other than +VR is not  
recordable on this unit unless you erase all contents in  
the disc (refer to page 79).  
• DVD-R recorded in the mode other than +VR is not  
recordable on this unit.  
• You cannot record copy-protected program using  
this unit. (Copy-protected signal is included in DVD-  
video or some satellite broadcasts.)  
• You cannot record “copy-once only” program on  
DVD.  
38 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BEFORE RECORDING  
Make Recording Compatible  
Setting for Auto Chapter  
You can set a specified time for chapter marks.  
Use this feature to make the unfinalized +VR mode discs  
recorded on other unit recordable on this unit. When you  
make an additional recording on this unit with “Make  
Recording Compatible” set to “ON”, the title menu is  
automatically converted to our style.  
1) Press [SETUP] and use [K / L] to select “General  
Setting”, then press [OK].  
“General Setting” menu will appear.  
2) Use [K / L] to select “Recording”, then press [OK].  
“Recording” menu will appear.  
1) Press [SETUP] and use [K / L] to select “General  
Setting”, then press [OK].  
3) Use [K / L] to select “Auto Chapter”, then press [OK].  
“General Setting” menu will appear.  
4) Use [K / L] to select a desired time option, then  
press [OK].  
2) Use [K / L] to select “Recording”, then press [OK].  
“Recording” menu will appear.  
Auto Chapter  
3) Use [K / L] to select “Make Recording Compatible”,  
OFF  
5 minutes  
10 minutes  
15 minutes  
30 minutes  
60 minutes  
then press [OK].  
4) Use [K / L] to select “ON” or “OFF”, then press [OK].  
Make Recording Compatible  
ON  
OFF  
5) Press [SETUP] to exit.  
ON:  
Title list will be replaced when you make  
additional recordings to the discs recorded by  
other units.  
Note  
• The interval for auto chapter may be up to two  
minutes different from the time option you set.  
OFF: Prohibiting additional record to the disc that  
has a title list created by other units.  
• A blank chapter may be created depending on the  
remaining time of the disc.  
5) Press [SETUP] to exit.  
Recording the DTV Closed Caption  
You can record the DTV Closed Caption as the part of the  
image for the recording program and see the recorded  
closed caption even with the TV that is not closed caption  
compliant.  
1) Press [SETUP] and use [K / L] to select “General  
Setting”, then press [OK].  
2) Use [K / L] to select “Display”, then press [OK].  
3) Use [K / L] to select “DTV CC”, then press [OK].  
4) Use [K / L] to select “Recording”, then press [OK].  
• If the “Caption Service” is set to “OFF”, you cannot  
select “Recording”.  
5) Use [K / L] to select “ON”, then press [OK].  
Recording  
ON  
OFF  
6) Press [SETUP] to exit.  
Note  
• If the “Caption Service” is set to “OFF”, the caption  
will not be recorded.  
EN 39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC RECORDING & ONE-TOUCH TIMER RECORDING  
Follow the steps to record TV programs.  
Press [DVD] first.  
Insert a recordable disc (refer to page  
STANDBY-ON  
25 on how to insert a disc).  
* Make sure the disc is compatible with this unit.  
1
SOURCE  
.@/:  
DTV/TV  
DISPLAY OPEN/CLOSE  
(Refer to page 38 for the list of compatible  
discs.)  
A
ABC  
DEF  
1
GHI  
4
2
JKL  
5
3
MNO  
6
It may take a while to load  
the disc.  
• When inserting a brand-new DVD+RW/DVD-RW,  
the unit automatically starts to format.  
• If titles have been recorded on the disc, the  
title list is displayed. Press [STOP C] to exit the  
title list.  
PQRS  
TUV  
WXYZ  
7
8
SPACE  
9
CLEAR  
.
0
DISC MENU  
SETUP  
o
Press [REC MODE] to select a  
recording mode.  
Refer to “Recording Mode” on page 38.  
s
B
OK  
p
TITLE  
RETURN  
2
3
j
F
i
B
h
g
C
CHANNEL  
--  
+
REC MODE VCR  
DVD  
TIMER  
AUDIO  
SP(2Hr)  
0h58m  
REC  
HDMI  
I
CM SKIP D.DUBBING TIMER SET RAPID PLAY  
Select the appropriate external input  
channel by pressing [SOURCE] or  
SEARCH  
[CHANNEL  
Press [DTV/TV] to select analog TV or  
digital TV, then use [CHANNEL  
/
].  
/
]
or [the Number buttons] and [ • ] (for  
digital TV channels) to select a  
desired channel to record.  
Refer to “Switching Analog Mode/Digital Mode”  
and “Channel Selection“ on page 32.  
CH 12  
40 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC RECORDING & ONE-TOUCH TIMER RECORDING  
Press [REC I] to start recording.  
“I” will be displayed for 5 seconds.  
Press [STOP C] to stop recording.  
The recorded title will appear in the title list.  
(Refer to “Guide to a Title List” on page 69.)  
4
5
e.g.) DVD+R  
I
Please finalize the disc when the writing is  
completed before playing back on other DVD  
players.  
Press [PAUSE F] to pause recording.  
Press [PAUSE F]] or [REC I] again to restart  
recording.  
Writing to Disc  
90%  
To set one-touch timer recording (OTR)...  
1
SP(2Hr)  
This is a simple way to set the recording time in blocks  
of 30 minutes.  
Press [REC I] repeatedly until the desired recording  
time (30 minutes to 6 hours) appears on the TV screen.  
NOV/21/08 11:00AM CH12 SP  
NOV/21/08 0:20:44  
2
EMPTY TITLE  
1:41:17 SP(2Hr)  
One-touch timer recording will start.  
I
0h30m  
• Press [STOP C] to exit the title list.  
0h30m  
(normal recording)  
1h00m  
6h00m  
5h30m  
To change the recording length during the one-  
touch timer recording:  
Press [REC I] repeatedly until the desired length appear.  
To cancel the one-touch timer recording within the  
specified time:  
Press [STOP C].  
Note  
• When you press [REC I], recording starts immediately and continues until the disc is full or you stop recording.  
• This unit cannot record images as aspect ratio of 16:9. The 16:9 images will be recorded as 4:3.  
• When the unit clock has not been set, the space for a date and time of title names will be blank.  
• When you record a TV program, you have to select the TV channel audio beforehand. Only the selected channel  
audio will be recorded. Refer to “Selecting TV Audio” on pages 33-34 for more details.  
• This unit cannot record in both stereo and SAP (secondary audio program) at the same time.  
• You cannot change the recording mode during the recording pause mode.  
• You can change a channel to be recorded during the recording pause mode.  
Note for one-touch timer recording  
• The remaining recording time will be displayed on the front panel display during one-touch timer recording. Press  
[DISPLAY] to see it on the TV screen.  
• Unlike the timer recording, you can perform the following operations during one-touch timer recording.  
- Turning off the power to stop one-touch timer recording.  
- Using [REC I] or [STOP C] on the remote control.  
• You cannot use the pause function during one-touch timer recording.  
• When one-touch timer recording is finished and the power is turned off, the unit will switch to the timer-standby  
mode automatically if a timer recording has been programmed. Press [TIMER SET] to cancel the timer-standby  
mode to use the unit continuously.  
EN 41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TIMER RECORDING  
You can program the unit to record up to 12 programs  
Guide to Timer Programming Display  
within a month in advance. Daily or weekly program  
recordings are also available.  
3
1
2
Timer Programming  
Before recording, make sure  
• Set the clock before setting a timer programming.  
• Insert a recordable disc with enough recordable space.  
JAN/ 2/08 12:00 AM 125.1 SP  
SP (1:00)  
TUE JAN/01 11:00AM  
Date  
Start  
End  
CH  
JAN/02  
12:00AM 1:00AM DTV125. 1  
New Program  
6
SOURCE  
DTV/TV  
DISPLAY OPEN/CLOSE  
A
.@/:  
ABC  
DEF  
1/1  
1
GHI  
4
2
JKL  
5
3
MNO  
6
4
5
PQRS  
TUV  
WXYZ  
1 Title of a timer program (Contains date, time, channel,  
7
8
SPACE  
9
CLEAR  
recording mode of the program)  
2 Current date and time  
3 Recording mode, and length of the recording  
4 Timer program list  
5 Total number of pages and current page (2 pages  
maximum)  
.
0
DISC MENU  
SETUP  
o
s
B
6 Recording media (“ ” (DVD) or “ ” (VCR))  
OK  
p
TITLE  
RETURN  
Press [TIMER].  
j
F
i
B
h
g
C
1
CHANNEL  
--  
+
Use [K / L] to select “New Program”,  
then press [OK].  
REC MODE VCR  
DVD  
TIMER  
AUDIO  
2
Timer Programming  
REC  
HDMI  
I
TUE JAN/01 11:00AM  
CM SKIP D.DUBBING TIMER SET RAPID PLAY  
Date  
Start  
End  
CH  
New Program  
• If there are 6 or more programs, use  
[H / G] to change pages.  
Note  
• If you have not set the clock yet:  
Entry screen for the clock setting will appear instead  
of the timer programming list at step 1. Continue  
with the step 4 in “Manual Clock Setting” on page 31  
before setting a timer programming.  
• Use [s / B] to move the cursor to the left and the  
right in the entry screen for the timer programming.  
• If a basic recording or one-touch timer recording is in  
progress on one component (e.g., VCR) and the timer  
recording set for the other component (e.g., DVD) is  
about to begin, the unit automatically switches to the  
programmed channel for timer recording 2 minutes  
before the programmed starting time, and the  
recording in progress (for VCR) will be canceled  
UNLESS their recording channels are the same. If their  
recording channels are the same, the timer recording  
will start without canceling the recording currently in  
progress. In this case, the recording of the same  
channel will be made on both DVD and VCR.  
Use [K / L] to enter the date, then  
press [B].  
3
Date  
JAN/02  
CH  
Start  
- - : - -  
REC To  
DVD  
End  
- - : - -  
Mode  
SP  
DTV125. 1  
SP  
2h00m  
JAN/01  
Daily  
When pressing [L] at  
the current date, the  
date will change as  
follows.  
p
p
p
p
MON-SAT  
MON-FRI  
SAT  
e.g.) January 1st  
p
p
FRI  
• You cannot make a program whose recording time  
p
p
exceeds 12 hours.  
SUN  
• Cancel the timer-standby mode by pressing  
[TIMER SET] before operation for either DVD or VCR.  
When finished operating, press [TIMER SET] to  
resume the timer-standby mode.  
JAN/31  
• In the timer-standby mode, you can turn on the  
power and use the component (VCR or DVD) which is  
not currently timer-programmed.  
42 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TIMER RECORDING  
Use [K / L / s / B] or [the Number  
buttons] to enter the start and end  
Use [K / L] to select a recording  
mode.  
4
5
time, then press [B].  
7
Date  
JAN/02  
CH  
Start  
12 : 00AM  
REC To  
DVD  
End  
1 : 00AM  
Mode  
SP  
Date  
JAN/02  
CH  
Start  
12 : 00AM  
REC To  
DVD  
End  
- - : - -  
Mode  
SP  
DTV125. 1  
SP  
1h00m  
DTV125. 1  
SP  
2h00m  
Refer to “Recording Mode” on page 38.  
• When recording to DVD, you can check the  
remaining recordable space of the disc when  
you select the recording mode.  
• You cannot make a program which recording  
time exceeds 12 hours.  
Date  
JAN/02  
CH  
Start  
12 : 00AM  
REC To  
DVD  
End  
1 : 00AM  
Mode  
SP  
Use [K / L / s / B] to select analog  
(“- - -”) / digital (“DTV”) mode or  
external input (L1 / L2), then press  
[B].  
DTV125. 1  
SP  
1h00m  
Auto recording mode select (DVD only)...  
e.g.) external input mode  
When “Auto” is selected as a recording mode, the unit  
calculates how much time is available on the disc and  
selects the best recording mode available  
Date  
JAN/02  
CH  
Start  
12 : 00AM  
REC To  
DVD  
End  
1 : 00AM  
Mode  
SP  
L1  
automatically to complete recording the program.  
SP  
1h00m  
Date  
JAN/02  
CH  
Start  
12 : 00AM  
REC To  
DVD  
End  
1 : 00AM  
Mode  
To record from external input (e.g., cable/  
satellite box), select L1 or L2.  
DTV125. 1  
Auto  
Use [K / L] or [the Number buttons] to select  
the channel number to record, then press  
[B].  
For digital mode, select both major and minor  
channels. Refer to “How to select a channel  
number for the timer recording” on page 44  
for more details.  
Auto  
1h00m  
• “Auto” is only available for one program in the timer  
program list.  
• The recording may be cut short when the available  
recording space of the disc is too limited.  
e.g.) analog mode  
Press [OK] when all items are  
entered.  
Date  
JAN/02  
CH  
Start  
12 : 00AM  
REC To  
DVD  
End  
1 : 00AM  
Mode  
SP  
After displaying a warning message for 10  
8
10  
seconds, timer program list will appear.  
SP  
1h00m  
PressTIMER SET toTimer Standby mode.  
WhenTimer set on DVD or VCR,  
it is not available in the standby mode.  
PressTIMER SET to cancel the Standby mode.  
e.g.) digital mode  
Date  
JAN/02  
CH  
Start  
12 : 00AM  
REC To  
DVD  
End  
1 : 00AM  
Mode  
SP  
DTV125. 1  
SP  
1h00m  
Timer Programming  
JAN/ 2/08 12:00 AM 125.1 SP  
SP (1:00)  
Date  
JAN/02  
TUE JAN/01 11:00AM  
End CH  
12:00AM 1:00AM DTV125. 1  
Start  
Use [K / L] to select the recording  
media (“DVD” or “VCR”), then press  
[B].  
Your program setting is now stored.  
• To set another program, repeat steps 2 to 8.  
• To exit, press [TIMER] or [SETUP].  
6
e.g.) recording to DVD  
Date  
JAN/02  
CH  
Start  
12 : 00AM  
REC To  
DVD  
End  
1 : 00AM  
Mode  
SP  
• When 2 or more programs are overlapped,  
“Timer program overlapped” appears, and the  
overlapped program will be displayed in blue.  
• To correct the timer program refer to  
“Checking, canceling, or correcting the timer  
programming information” on page 44.  
DTV125. 1  
SP  
1h00m  
Press [TIMER SET] to set a timer  
programming.  
9
will appear on the front panel display.  
EN 43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TIMER RECORDING  
How to select a channel number for the timer recording  
Analog TV  
For channel number 2-6 press, press [B] or [ • ] to decide the channels. For other channels (7-69),  
the channel will be decided as soon as you enter the channel number.  
Analog CATV  
Digital TV  
For channel number 1-12 press, press [B] or [ • ] to decide the channels. For other channels (13-  
125), the channel will be decided as soon as you enter the channel number.  
For channel number 1-9 press, press [B] or [ • ] to decide the channels. For other channels (10-99),  
the channel will be decided as soon as you enter the channel number.  
Digital CATV  
minor channels  
For channel number 1-13 press, press [B] or [ • ] to decide the channels. For other channels (14-  
135), the channel will be decided as soon as you enter the channel number.  
For channel number 1-9 press, press [B] or [ • ] to decide the channels. For other channels (10-99),  
the channel will be decided as soon as you enter the channel number.  
<Hint>  
• You can decide the 1-digit channel number by pressing 0 first , then enter desired 1-digit channel number.  
e.g.) “5”: [0]+[5]  
• For selecting the channels with [K / L] you need to press [B] or [ • ] to decide the channel number.  
• For selecting the minor channels with [K / L], please make sure the minor channel your are selecting is existed.  
[K / L] does not skip the non-existed minor channels.  
To stop the timer recording in progress  
If the timer program did not complete correctly,  
Press [STOP C] / [STOP/EJECT  
C
A] on the front panel  
the error number appears in the timer pro-  
gramming list.  
of the unit to stop the timer recording in progress.  
[STOP C] on the remote control is not effective.  
Timer Programming  
Checking, canceling, or correcting the timer  
programming information  
WED JAN/02 11:00AM  
Date  
E41 JAN/02  
Start  
End  
CH  
12:00AM 1:00AM DTV125. 1  
New Program  
1) Press [TIMER SET].  
2) Press [TIMER].  
1/1  
3) Check the information.  
Timer Programming  
Each error number means:  
JAN/ 2/08 12:00 AM 125.1 SP  
SP (1:00)  
Date  
JAN/02  
TUE JAN/01 11:00AM  
E1-22 Recording error other E41  
E37-39 than below  
Power failed  
Start  
End CH  
12:00AM 1:00AM DTV125. 1  
New Program  
E24  
Unrecordable disc  
E42  
E43  
E44  
E45  
E46  
No disc when  
recording  
4-A) To delete the timer program:  
E25-26 Copy prohibited  
program  
Already 49 titles  
recorded  
1 Use [K / L] to select the program you want to  
delete, then press [OK].  
2 Use [K / L] to select “Delete”, then press [OK].  
Confirmation window will appear.  
3 Use [K / L] to select “Yes”, then press [OK].  
E29  
Disc protected  
Already 254 chapters  
recorded  
E30  
Disc full  
Copy prohibited  
program  
4-B) To correct the timer program:  
E35  
E36  
PCA full *1  
It is impossible to  
record additionally  
on a disc recorded  
by other units  
1 Use [K / L] to select the program you want to  
correct, then press [OK].  
Already finalized  
video format disc  
2 Use [K / L] to select “Program Change”, then  
E40  
Some portion has  
not been recorded  
because of program  
overlapping.  
Recording did not  
start at the start time.  
when setting “  
press [OK].  
Make Recording  
Compatible” to “OFF”.  
3 Correct the timer program by using  
[K / L / { / B], then press [OK].  
5) Press [TIMER] to exit.  
• E23, E27, E28, E31, E32, E33 and E34 are not displayed.  
• A program with the error number is grayed in the timer  
programming list.  
6) Press [TIMER SET] to return to the timer standby  
mode.  
Note  
• Once the timer programming list with error line(s) is  
displayed, or after canceling and setting again the timer  
standby mode, the program line(s) with error will be  
cleared.  
• Press [TIMER] to check the timer recording in progress.  
When the timer recording is proceeding, that  
program will be highlighted with red. In this case,  
you cannot select any other program.  
*1 PCA is a disc's space reserved for recording test.  
44 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TIMER RECORDING  
Hints for Timer Recording  
• If there is a power failure or this unit has been  
unplugged for more than 30 seconds, the clock setting  
and all timer programming will be lost.  
• If both DVD and VCR are timer programmed, you cannot  
use any functions for either unit during timer standby or  
timer recording. If you want to use functions other than  
recording under such condition, cancel timer recording  
by pressing [TIMER SET] during timer standby or stop  
recording by pressing [STOP C] / [STOP/EJECT  
the front panel of the unit during timer recording.  
• To cancel the timer standby mode, press [TIMER SET].  
• If a disc is not inserted, "DVD" on the front panel display  
flashes and timer recording cannot be performed. In  
C
A] on  
some cases,  
will appear momentarily around the start  
time as the unit attempts to record. Please insert a  
recordable disc.  
• If a cassette tape with a erase-protection tab is not in the • When the starting and the ending time are the same,  
cassette compartment or there is no cassette tape in the  
cassette compartment, “VCR” on the front panel display  
flashes and timer recording cannot be performed. Please  
insert a recordable cassette tape.  
“Exceeds 12 hours” appears and the program setting will  
not be accepted.  
• When the disc or cassette tape becomes full during the  
recording, the unit turns itself off.  
• If a cassette tape ends during the timer recording, the  
unit will automatically stop, eject the cassette tape, and  
turn itself off. To continue recording, insert a recordable  
tape.  
• If the starting time is earlier and the ending time is later  
than the current time, the recording will start right after  
you press [TIMER SET] at step 9 on page 43.  
• You cannot change the audio language for the timer  
recording of digital TV broadcasting.  
• The timer recording cannot be performed in DVD and  
VCR at the same time. If you set 2 programmings with  
the same channel and time in both devices, the program  
which is set first will have the priority.  
• When all the timer recordings are completed,  
flashes.  
Press [TIMER SET] to release the unit from the timer  
standby mode.  
The Priority of Overlapped Settings  
• Timer program which has the earlier start time will be placed first in the timer program list, and be given priority over  
the programs with the later start time when timer programs overlap.  
• When timer programs overlap, the first 2 minutes (at the longest) of the later recording will be cut off.  
• When 2 or more timer programs have the same start time, the program set first will be given priority.  
• A timer recording of lower priority will be canceled or start from the middle.  
• Check the overlapped timer programmings and change the priority if necessary.  
When the starting time is the same:  
A program set previously (PROG. A) has priority.  
PROG. A  
PROG. B  
actual  
recording  
PROG. A
PROG. B  
The first 2 minutes (at the longest) will be cut off  
(when recording to DVD only).  
Note for DVD recording  
When the end time of the programming  
currently being recorded and the start time  
of the subsequent program are same:  
The beginning of the PROG. B may be cut off.  
• When the recording time of 2 programs are overlapped, or  
the end time of a program and the start time of another  
program is the same, the first 2 minutes (at the longest) of  
the subsequent program will be cut off.  
• If the cut-off portion comes up to 3 minute or more, this  
program will be displayed with error number E40 in the  
timer programming list.  
PROG. A  
PROG. B  
actual  
recording  
PROG. A  
PROG. B  
The first 2 minutes (at the longest) will be cut off.  
EN 45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OVERWRITING UNNECESSARY TITLE  
Overwriting from the Beginning of  
the Title  
Overwriting in the Middle of the Title  
You can overwrite the existing title from the selected  
position.  
You can overwrite the existing title from the beginning.  
1) Press [STANDBY-ON y].  
Make sure that the TV input is set on the unit.  
1) Follow the steps 1, 2 and 4 on the left.  
2) Use [K / L] to select “Play”, then press [OK].  
2) Load the disc that includes a title to be overwritten.  
Playback will start.  
It takes a while to display  
the title list.  
3) Press [PAUSE F] at the point from which you want  
to start overwriting.  
Title list will appear.  
If the title list does not appear, press [TITLE].  
4) Press [REC I].  
3) Press [REC MODE] to select a recording mode.  
“F I”, display menu, channel, and the time lapse will  
be displayed as illustrated on the left.  
Refer to “Recording Mode” on page 38.  
4) Use [K / L] to select a title to be overwritten, then  
press [OK].  
5) Select the channel you want to record.  
(Refer to page 32 on how to select a channel.)  
1
SP (2Hr)  
NOV/21/08 11:00AM CH12 SP  
NOV/21/08 0:20:44  
6) Press [REC I] again.  
Overwriting recording starts.  
2
NOV/22/08 11:35AM CH13 EP  
NOV/22/08 0:10:33  
3
7) Press [STOP C] to stop recording.  
EMPTY TITLE  
1:37:52 SP(2Hr)  
This operation may take a  
while to be completed.  
5) Use [K / L] to select “Overwrite”, then press [OK].  
Note  
1
SP (2Hr)  
Play  
Edit  
Overwrite  
• Recording mode of the overwriting title is the same  
as that of the original (overwritten) title when  
overwriting in the middle of the title.  
NOV/21/08 11:00AM CH12 SP  
NOV/21/08 0:20:44  
2
6) Select the channel you want to record.  
(Refer to page 32 on how to select a channel.)  
• Title name will not be overwritten.  
e.g.) DVD+RW  
selected title number  
to be overwritten  
1
1
0:01:00  
+RW  
CH 12  
SP(2Hr)  
2h00m  
F
I
7) Press [REC I].  
Overwriting recording starts.  
The elapsed-time counter starts running.  
8) Press [STOP C] to stop recording.  
Title name is also overwritten.  
This operation may take a  
while to be completed.  
Note  
• The remaining recording time is displayed on the  
bottom right corner of the TV screen during  
overwriting.  
46 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OVERWRITING UNNECESSARY TITLE  
Hints for Overwriting  
When you overwrite on the unnecessary title, there were various circumstances such as follows. Please note that  
following cases only describe the overwriting without any recording mode discrepancy. To avoid accidental deletion  
please check if there is no important title after the overwriting point.  
When overwriting title is shorter than the existing title:  
(overwriting from the beginning of the title)  
overwrite  
30 - 180 seconds will be cut off.  
recording : A  
after  
overwriting  
existing title : B  
title name : B  
title name : A  
When overwriting title is longer than the existing title:  
(overwriting from the beginning of the title)  
overwrite  
recording : A  
after  
overwriting  
existing title : B  
title name : A  
overwrite  
recording : A  
30 - 180 seconds will be cut off.  
after  
overwriting  
existing title : B  
existing title : C  
title name : A  
title name : C  
When overwriting in the middle of the title:  
overwrite  
30 - 180 seconds will be cut off.  
recording : A  
after  
overwriting  
existing title : B  
title name : B*  
title name : B  
Overwritten section and the rest of the sections will  
have the same title name as the original existing  
title (B).  
*
Note  
• When a title name is overwritten, its thumbnail is also overwritten.  
• “Auto Chapter” interval time is reset at the overwriting start point.  
• A chapter mark is put at the beginning of the overwrite title when overwriting in the middle of the title.  
EN 47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETTINGS FOR AN EXTERNAL DEVICE  
Connection to an External Device  
Connect the external device properly to the unit by using input jacks either L2 (Front) or L1 (Rear).  
When connecting an external device of monaural output to this unit, use AUDIO L jack of L2 (Front) or L1 (Rear).  
Use S-video or the RCA audio/video cables for this connection.  
or  
S-VIDEO  
OUT  
VIDEO  
OUT  
AUDIO OUT  
S-VIDEO  
OUT  
VIDEO  
OUT  
AUDIO OUT  
R
L
R
L
external device  
(camcorder, VCR etc.)  
RCA  
RCA  
RCA  
S-video  
cable  
RCA  
S-video  
cable  
video  
cable  
or  
video  
cable  
audio  
cable  
audio cable  
or  
DVD/VCR  
S-VIDEO  
IN ---AUDIO---OUT  
or  
IN  
IN ---VIDEO---OUT  
L2  
L1  
to L2 IN  
to L1 IN  
HDMI OUT  
OUT  
IN  
DVD/VCR  
DA
AUDIO OU
D
OUT  
DCPONENT S-VIDEO IN --- AUDIO---OUT  
VDEO OUT  
L
L
ANTENNA  
R
R
IN  
COAXIAL  
IN ---VIDEO---OUT  
R
front of this unit  
rear of this unit  
Supplied cables used in this connection are as follows:  
• RCA audio cable (L/R) x 1  
• RCA video cable x 1  
Please purchase the rest of the necessary cables at your local store.  
.@/:  
ABC  
DEF  
Use [K / L] to select “Video Input”,  
then press [OK].  
1
GHI  
4
2
JKL  
5
3
MNO  
6
3
4
PQRS  
TUV  
WXYZ  
7
8
SPACE  
9
CLEAR  
Use [K / L] to select desired external  
input, then press [OK].  
.
0
DISC MENU  
SETUP  
Video Input  
o
L1 (Rear)  
L2 (Front)  
s
B
OK  
p
TITLE  
RETURN  
Use [K / L] to select the input jack  
type to connect, then press [OK].  
j
F
i
B
If you want to use VIDEO IN jack, select “Video  
In”.  
5
h
g
C
If you want to use S-VIDEO IN jack, select  
“S-Video In”.  
Press [SETUP] and use [K / L] to  
select “General Setting”, then press  
L1 (Rear)  
Video In  
S-Video In  
1
2
[OK].  
“General Setting” menu will appear.  
Use [K / L] to select “Video”, then  
press [OK].  
Submenu will appear.  
Press [SETUP] to exit.  
6
48 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETTINGS FOR AN EXTERNAL DEVICE  
Recording from an External Device  
Before recording from an external device, refer to the  
instructions for the connection on page 48.  
Recording to a DVD  
Press [DVD].  
Insert a recordable disc (refer to page  
25 on how to insert a disc).  
1
STANDBY-ON  
SOURCE  
.@/:  
DTV/TV  
DISPLAY OPEN/CLOSE  
A
It takes a while to load the disc.  
ABC  
DEF  
1
GHI  
4
2
JKL  
5
3
MNO  
6
Recording to a Cassette Tape  
Press [VCR].  
PQRS  
TUV  
WXYZ  
Insert the cassette tape with an  
7
8
SPACE  
9
CLEAR  
erase-protection tab intact.  
.
0
Select the appropriate external input  
channel (L1 or L2) by pressing  
DISC MENU  
SETUP  
o
2
3
[SOURCE] or [CHANNEL  
/
].  
s
B
OK  
p
• If the external device is connected to the rear  
of this unit, select L1.  
TITLE  
RETURN  
• If the external device is connected to the front  
of this unit, select L2.  
• You can also select L1 or L2 channel by using  
[the Number buttons].  
e.g.) For L1, press [0], [0], [1].  
j
F
i
B
h
g
C
CHANNEL  
--  
+
Press [REC MODE] to select a  
recording mode.  
Refer to “Recording Mode” on page 38 for DVD,  
or “Recording” on page 93 for VCR.  
REC MODE VCR  
DVD  
TIMER  
AUDIO  
REC  
HDMI  
I
CM SKIP D.DUBBING TIMER SET RAPID PLAY  
SEARCH  
Press [RECORD I] on the unit to start  
recording.  
4
Start playback on the external device  
to record from.  
5
6 4  
For disc:  
Press [STOP C] on the unit to stop  
6 recording.  
For cassette tape:  
Press [STOP/EJECT  
to stop recording.  
This operation may take a  
while to be completed.  
C
A] on the unit  
6 4  
EN 49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BI-DIRECTIONAL DUBBING  
You can copy contents in a DVD to a cassette tape, or do  
Preparing for dubbing (cassette tape to DVD):  
• Insert a cassette tape to be dubbed.  
• Insert a recordable DVD.  
• Make sure there is enough space on the DVD.  
Preparing for dubbing (DVD to cassette tape):  
• Insert a disc to be dubbed.  
vice versa. This function is available only when the contents  
are not copy-protected. (Before you start, refer to page 38  
for the list of compatible discs.)  
STANDBY-ON  
• Insert a cassette tape with an erase-protection tab in  
tact.  
SOURCE  
.@/:  
DTV/TV  
DISPLAY OPEN/CLOSE  
• Make sure there is enough recordable length on the  
tape.  
A
ABC  
DEF  
1
GHI  
4
2
JKL  
5
3
MNO  
6
Press [SETUP] and use [K / L] to  
select “General Setting”, then press  
PQRS  
TUV  
WXYZ  
1
[OK].  
7
8
SPACE  
9
CLEAR  
“General Setting” menu will appear.  
.
0
DISC MENU  
SETUP  
Use [K / L] to select “Recording”,  
then press [OK].  
“Recording” menu will appear.  
o
2
s
B
OK  
p
TITLE  
RETURN  
Use [K / L] to select “Dubbing  
Mode”, then press [OK].  
Selection menu will appear.  
j
F
i
B
3
h
g
C
CHANNEL  
--  
+
REC MODE VCR  
DVD  
TIMER  
AUDIO  
REC  
HDMI  
I
CM SKIP D.DUBBING TIMER SET RAPID PLAY  
SEARCH  
Note for dubbing  
• Dubbing direction setting in “Dubbing Mode” menu  
is always reset to “VCR DVD” whenever you turn off  
the power.  
• You cannot change the output mode during VCR to  
DVD or DVD to VCR duplication.  
Note for recording to a tape:  
Make sure  
- the cassette tape’s erase-protection tab is intact.  
- the cassette tape is long enough.  
Note for recording to a disc:  
Make sure  
- the disc is compatible (refer to page 38).  
50 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BI-DIRECTIONAL DUBBING  
VCR to DVD  
DVD to VCR  
Use [K / L] to select “VCR DVD”,  
then press [OK].  
Use [K / L] to select “DVD VCR”,  
then press [OK].  
4
4
Dubbing Mode  
Dubbing Mode  
VCR  
DVD  
DVD  
VCR  
VCR  
DVD  
DVD  
VCR  
Press [SETUP] to exit.  
Press [SETUP] to exit.  
Press [VCR], then press [PLAY B] to  
find the point where you wish to start  
dubbing.  
Press [DVD], then press [PLAY B] to  
find the point where you wish to start  
dubbing.  
5
6
7
8
9
5
6
7
8
9
Press [PAUSE F] when you come to  
the desired start point.  
Press [PAUSE F] when you come to  
the desired start point.  
Press [DVD], then press [REC MODE]  
repeatedly to select the desired  
recording mode.  
Press [VCR], then press [REC MODE]  
repeatedly to select the desired  
recording mode.  
Rewind or fast forward the tape to the point  
where you want to start recording.  
Press [D.DUBBING].  
VCR to DVD duplication will start.  
Press [D.DUBBING].  
DVD to VCR duplication will start.  
Press [STOP C] to stop the dubbing.  
Press [STOP C] to stop the dubbing.  
Note for VCR to DVD duplication  
• After starting VCR to DVD duplication, the picture may be distorted because of the auto tracking function. This is  
not a malfunction. Be advised to play back the tape until the picture is stabilized, then set the starting point which  
you wish to start recording, and start VCR to DVD duplication.  
• This unit will automatically stop the duplication if playback with no image is detected for more than 3 minutes  
during VCR to DVD duplication.  
• Playback sound mode of the dubbed contents is determined by the playback sound mode of the VCR at the point  
of dubbing.  
• This function is available for audio CD, but not with MP3 files.  
EN 51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETTING A DISC TO PROTECT  
To prevent accidental recording, editing or erasing the  
titles, you can protect them from “Disc Edit” menu.  
Press [SETUP].  
STANDBY-ON  
1
2
3
Use [K / L] to select “Disc Edit”, then  
press [OK].  
SOURCE  
.@/:  
DTV/TV  
DISPLAY OPEN/CLOSE  
A
ABC  
DEF  
1
GHI  
4
2
JKL  
5
3
MNO  
6
Use [K / L] to select “Disc Protect  
OFF ON”, then press [OK].  
e.g.) DVD+RW  
PQRS  
TUV  
WXYZ  
7
8
9
CLEAR  
SPACE  
Disc Edit  
.
0
Edit Disc Name  
Erase Disc  
DISC MENU  
SETUP  
Make Edits Compatible  
o
Disc Protect OFF  
ON  
s
B
OK  
p
TITLE  
RETURN  
j
F
i
B
h
g
C
Use [K / L] to select “Yes”, then press  
[OK].  
CHANNEL  
--  
+
4
Protect this disc?  
REC MODE VCR  
DVD  
TIMER  
AUDIO  
Yes  
No  
REC  
HDMI  
I
A disc will be protected.  
CM SKIP D.DUBBING TIMER SET RAPID PLAY  
SEARCH  
This operation may take a  
while to be completed.  
Note  
To cancel the disc protect:  
• When you insert a disc protected with this unit,  
“Disc Protect ON OFF” will appear instead of “OFF  
ON” at step 3.  
Disc Edit  
Edit Disc Name  
Erase Disc  
Make Edits Compatible  
Disc Protect ON  
OFF  
To release the protection for the disc, select “Disc  
Protect ON OFF” at step 3, then follow rest of the  
procedures.  
52 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PLAYING THE DISCS ON OTHER DVD PLAYERS  
Finalizing a Disc  
Press [SETUP].  
You will need to finalize DVD+R, DVD-RW or DVD-R to  
play them back on other DVD players.  
1
Finalizing may take several minutes up to an hour.  
A shorter recording period on the disc will require a  
longer time period for finalization. Do not unplug the  
power cord during finalization.  
Use [K / L] to select “Disc Edit”, then  
press [OK].  
“Disc Edit” menu will appear.  
2
3
4
STANDBY-ON  
Use [K / L] to select “Finalize”, then  
press [OK].  
SOURCE  
.@/:  
DTV/TV  
DISPLAY OPEN/CLOSE  
A
ABC  
DEF  
Use [K / L] to select “Yes”, then press  
[OK].  
e.g.) DVD+R, DVD-R  
1
GHI  
4
2
JKL  
5
3
MNO  
6
PQRS  
TUV  
WXYZ  
7
8
SPACE  
9
CLEAR  
Finalize disc?  
Yes  
No  
.
0
DISC MENU  
SETUP  
Finalizing will start.  
o
s
B
OK  
p
Finalizing  
90%  
TITLE  
RETURN  
To cancel finalizing...  
j
F
i
B
(DVD-RW only)  
h
g
C
• To cancel finalizing at step 4, press [STOP C], select  
“Yes” with [K / L], then press [OK]. Finalizing is  
canceled and the unit will be in stop mode.  
CHANNEL  
--  
+
REC MODE VCR  
DVD  
TIMER  
AUDIO  
REC  
HDMI  
Do you want to cancel ?  
I
Yes  
No  
CM SKIP D.DUBBING TIMER SET RAPID PLAY  
SEARCH  
Finalizing  
5%  
• If  
appears when pressing [STOP C], you cannot  
cancel finalizing because the finalizing has been in  
certain progress.  
Note  
• When selecting “No” and press [OK] or [RETURN] ,  
finalizing will be continued.  
• Once you have finalized a DVD+R/ DVD-R, you  
cannot edit or record anything on that disc.  
• You cannot cancel finalizing the DVD+R/DVD-R once  
it has started.  
• There is no need to finalize DVD+RW.  
• When you insert a DVD-RW finalized with this unit,  
“Undo Finalize” will appear instead of “Finalize”.  
This operation may take a  
while to be completed.  
Disc Edit  
Edit Disc Name  
Erase Disc  
Undo Finalize  
Disc Protect ON  
OFF  
Finalizing is completed.  
To release the finalizing for the disc, select “Undo  
Finalize” at step 3.  
* DO NOT power off during finalization, this will result  
in malfunction.  
5
EN 53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PLAYING THE DISCS ON OTHER DVD PLAYERS  
Auto Finalizing  
Press [SETUP] and use [K / L] to  
select “General Setting”, then press  
You can finalize discs automatically using this function.  
You can use this function to finalize discs after finishing  
all timer recordings and at the end of the disc space.  
1
[OK].  
“General Setting” menu will appear.  
Use [K / L] to select “Recording”,  
then press [OK].  
“Recording” menu will appear.  
STANDBY-ON  
SOURCE  
.@/:  
DTV/TV  
DISPLAY OPEN/CLOSE  
2
3
4
A
ABC  
DEF  
Use [K / L] to select “Auto Finalize”,  
then press [OK].  
1
GHI  
4
2
JKL  
5
3
MNO  
6
PQRS  
TUV  
WXYZ  
7
8
SPACE  
9
CLEAR  
Use [K / L] to select “Disc Full” or  
“End of Timer Rec”, then press [OK].  
.
0
Auto Finalize  
DISC MENU  
SETUP  
o
Disc Full  
End of Timer Rec  
s
B
OK  
p
TITLE  
RETURN  
Use [K / L] to select “ON”, then press  
[OK].  
j
F
i
B
e.g.) “Disc Full”  
5
h
g
C
Disc Full  
CHANNEL  
ON  
OFF  
--  
+
REC MODE VCR  
DVD  
TIMER  
AUDIO  
Your setting will be activated.  
REC  
HDMI  
Press [SETUP] to exit.  
I
CM SKIP D.DUBBING TIMER SET RAPID PLAY  
SEARCH  
6
54 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INFORMATION ON PLAYBACK  
Before you play back DVD, read the following information.  
Playable Discs and Files  
Unplayable Discs  
This unit is compatible to play back the following discs.  
To play back a DVD, make sure that it meets the  
requirements for region codes and color systems as  
described below. You can play back discs that have the  
following logos will play back on the unit. Other disc  
types are not guaranteed to play back.  
The following discs will not play back on this unit.  
• CD-ROM  
• DVD-RAM  
• DVD-ROM  
• Compact Disc-Interactive (CD-I)  
• Video Single Disc (VSD)  
• DVD-audio  
• Unfinalized disc  
• DVD contains MP3 and DVD or CD contains Windows  
Media™ Audio / JPEG / DivX® files  
• DVD-R or DVD-RW recorded in VR mode or non  
compatible recording format  
Playable discs  
Logos  
DVD-video  
DVD+RW  
• Blu-ray Disc  
• HD DVD  
• Super Video CD  
On the following disc, the sound may not be heard.  
• Super audio CD - Only the sound on the CD layer can be  
heard. The sound on the high-density super audio CD  
layer cannot be heard.  
DVD+R  
Color Systems  
DVD is recorded in different color systems throughout  
the world. The most common color system is NTSC  
(which is used primarily in the United States and Canada).  
This unit uses NTSC, so DVD you play back must be  
recorded in the NTSC system. You cannot play back DVD  
recorded in other color systems.  
DVD-RW  
(Finalized video mode discs only)  
DVD-R  
(Finalized video mode discs only)  
Region Codes  
CD-DA (audio CD)  
video CD  
This unit has been designed to play back DVD  
with region 1. DVD must be labeled for ALL  
regions or for region 1 in order to play back on  
the unit. You cannot play back DVD that are  
labeled for other regions. Look for the symbols  
on the right on your DVD. If these region  
symbols do not appear on your DVD, you cannot  
play back the DVD in this unit.  
The number inside the globe refers to region of the  
world.  
A DVD labeled for a specific region can only play back on  
the unit with the same region code.  
CD-RW  
CD-R  
Playable files  
Media  
CD-DA  
CD-RW/-R  
MP3  
is a trademark of DVD Format/Logo Licensing Corporation.  
EN 55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INFORMATION ON PLAYBACK  
PBC (playback control) for Video CD  
Hint for DVD Playback  
The contents of DVD are generally divided into titles.  
Titles may be further subdivided into chapters.  
You can select images or information on the menu  
screen by activating the PBC (playback control) function  
of the video CD.  
This unit conforms to ver.1.1 and ver. 2.0 of video CD  
standard with PBC function.  
Ver.1.1 (without PBC function): You can enjoy playback  
picture as well as music CD.  
DVD-video  
title 1  
title 2  
chapter 1 chapter 2 chapter 1 chapter 2 chapter 3  
Ver.2.0 (with PBC function): While using a video CD with  
PBC function, “PBC” appears on the TV screen.  
audio CD, video CD  
Note  
track 1  
track 2  
track 3  
track 4  
track 5  
file 5  
• PBC setting turns to “ON” when loading video CD  
with PBC function, thus, even after setting PBC to  
“OFF” and ejecting the video CD then reloading the  
video CD, this setting turns to “ON” automatically.  
MP3  
file 3  
• Some operations cannot be performed while PBC  
function is on. Cancel PBC function temporarily to  
perform those operations by following the  
instruction below.  
folder 1  
file 1  
folder 2  
file 4  
file 2  
1) Press [SETUP].  
2) Use [K / L] to select “CD Playback Mode”, then  
press [OK].  
“CD Playback Mode” menu will appear.  
3) Use [K / L] to select “PBC (Video CD only)”, then  
press [OK].  
4) Use [K / L] to select “ON” or “OFF”, then press [OK].  
Your setting will be activated.  
You can play back interactive software using menu  
screens. Refer to instructions in the video CD.  
56 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC PLAYBACK  
Direct Playback  
Press [DVD] first.  
Insert a playable disc (refer to page  
25 on how to insert a disc).  
STANDBY-ON  
1
SOURCE  
.@/:  
DTV/TV  
DISPLAY OPEN/CLOSE  
A
ABC  
DEF  
Align the disc to  
the disc tray guide.  
1
GHI  
4
2
JKL  
5
3
MNO  
6
PQRS  
TUV  
WXYZ  
* Make sure the disc is compatible with this unit.  
(Refer to page 55 for the list of compatible discs.)  
7
8
SPACE  
9
CLEAR  
.
It may take a while to load  
the disc.  
0
DISC MENU  
SETUP  
o
Press [PLAY B] to start playback.  
s
B
OK  
If you are playing back a DVD-video or video CD  
with PBC function, a menu may appear.  
TITLE  
RETURN  
p
B
2
3
Refer to “Using the Title / Disc Menu” on page  
60.  
j
F
i
h
g
C
Press [STOP C] once to stop playback  
temporarily.  
• Refer to “Resume Playback” on page 61.  
CHANNEL  
--  
+
REC MODE VCR  
DVD  
TIMER  
AUDIO  
REC  
HDMI  
I
CM SKIP D.DUBBING TIMER SET RAPID PLAY  
SEARCH  
Note  
• Some discs may start playback automatically.  
• You can select images or information on the menu  
screen by activating PBC (playback control) function  
(page 56).  
EN 57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC PLAYBACK  
Playback from the Title List  
If you want to see disc information, press [{ ] when the  
first page of the title list is displayed or press [ K ] when  
the first title is selected but not when “Play”, “Edit” or  
“Overwrite” is highlighted.  
.@/:  
ABC  
DEF  
1
GHI  
4
2
JKL  
5
3
MNO  
6
e.g.) DVD+RW  
PQRS  
TUV  
WXYZ  
7
8
SPACE  
9
CLEAR  
No Disc Name  
.
0
Disc  
DVD+RW  
3
DISC MENU  
SETUP  
Total Titles  
Disc Space Used  
Disc Protect  
Make Edits Compatible  
0:30:48  
OFF  
o
Needed  
s
B
OK  
p
TITLE  
RETURN  
e.g.) DVD+R  
j
F
i
B
h
g
C
No Disc Name  
CHANNEL  
Disc  
DVD+R  
5
--  
+
Total Titles  
Disc Space Used  
Disc Protect  
Finalize  
1:30:48  
OFF  
REC MODE VCR  
DVD  
TIMER  
Finalized  
Press [DVD] first.  
1. Disc name  
(Default “No Disc Name”)  
2. Disc type  
(DVD+RW/DVD+R/ DVD-RW/DVD-R)  
3. Total number of title  
(include “EMPTY TITLE”)  
4. Total time of recorded disc space  
5. Status of disc protection  
(“ON” is protected disc.)  
Insert a playable disc (refer to page  
25 on how to insert a disc).  
* Make sure the disc is compatible with this unit.  
(Refer to page 55 for the list of compatible discs.)  
1
2
It may take a while to load  
the disc.  
• Title list will appear automatically.  
• To exit the title list, press [STOP C].  
• To resume the title list, press [TITLE].  
6. Making edits compatible/finalize  
• When DVD+RW is inserted:  
If the disc needs to be set “Make Edits Compatible”,  
“Needed” is displayed. Otherwise, “Not Needed” is  
displayed. (Refer to page 80.)  
• When DVD+R, DVD-RW or DVD-R is inserted:  
If “Finalize” is done, “Finalized” is displayed.  
Otherwise, “Unfinalized” is displayed.  
Use [K / L] to select a desired title,  
then press [OK].  
1
SP (2Hr)  
NOV/21/08 11:00AM CH12 SP  
NOV/21/08 0:20:44  
2
Use [K / L] to select “Play”, then  
NOV/22/08 11:35AM CH13 EP  
NOV/22/08 0:10:33  
press [OK].  
3
EMPTY TITLE  
1:37:52 SP(2Hr)  
3
1
SP (2Hr)  
Play  
Edit  
Overwrite  
NOV/21/08 11:00AM CH12 SP  
NOV/21/08 0:20:44  
• For Video CD, when “PBC (Video CD only)” in  
“CD playback Mode” menu is set to “ON”, the  
video CD main menu will appear when  
inserting a disc. In such case, select a numbered  
menu with [the Number buttons].  
2
NOV/22/08 11:35AM CH13 EP  
NOV/22/08 0:10:33  
3
EMPTY TITLE  
1:37:52 SP(2Hr)  
• Press [B] to display the next page, and press  
[{] to display the previous page.  
Playback will start.  
Note  
Press [STOP C] once to stop playback  
temporarily.  
• Refer to “Resume Playback” on page 61.  
• Some discs may start playback automatically.  
• You can also start playback by pressing [PLAY B]  
instead of [OK] at step 2.  
4
58 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC PLAYBACK  
Playing Back an Audio CD and a CD-RW/-R with MP3 Files  
Press [DVD] first.  
Insert a playable disc (refer to page  
25 on how to insert a disc).  
STANDBY-ON  
* Make sure the disc is compatible with this unit.  
(Refer to page 55 for the list of compatible discs.)  
1
2
SOURCE  
.@/:  
DTV/TV  
DISPLAY OPEN/CLOSE  
A
It may take a while to load  
the disc.  
ABC  
DEF  
1
GHI  
4
2
JKL  
5
3
MNO  
6
When an audio CD is inserted, track list will  
appear.  
When a CD-RW/-R with MP3 files is inserted, file  
list will appear.  
• To exit the track/file list, press [STOP C].  
• To resume the track/file list, press [TITLE].  
PQRS  
TUV  
WXYZ  
7
8
9
CLEAR  
SPACE  
.
0
DISC MENU  
SETUP  
o
Use [K / L] to select a desired folder  
or track/file, then press [OK].  
e.g.) File list  
s
B
OK  
p
TITLE  
RETURN  
File List  
j
F
i
DISC NAME  
B
A
B
h
g
C
1
2
3
4
5
6
MP3 file 1  
MP3 file 2  
MP3 file 3  
MP3 file 4  
MP3 file 5  
MP3 file 6  
CHANNEL  
--  
+
REC MODE VCR  
DVD  
TIMER  
AUDIO  
1/ 2  
REC  
HDMI  
I
When selecting track/file:  
Playback will start.  
When selecting the folder (Not available for audio CD):  
CM SKIP D.DUBBING TIMER SET RAPID PLAY  
SEARCH  
The files in the folder will appear.  
Use [K / L] to select the file or folder you want to play  
back, then press [OK].  
• Press [PLAY B], [OK] or [B] to move to any lower  
hierarchies.  
• Press [s] or [RETURN] to move back to the previous  
hierarchy.  
Hints for audio CD tracks and MP3 files:  
• Folders are shown by  
.
• Audio CD tracks are shown by  
.
3
• MP3 files are shown by  
.
• The system can recognize up to 255 folders, up to 99  
tracks/999 files.  
• Letters of a file/folder name overflowing the given space  
will be displayed as “...”. Unrecognizable characters will  
be replaced with asterisks.  
• If there are no files in the folder, “No Files” will be displayed.  
It is recommended that files to be played back in this  
unit are recorded under the following specifications:  
<MP3>  
Note  
• The audio source of MP3 files cannot be recorded as  
digital sound by an MD or DAT deck.  
• Sampling frequency  
• Constant bit rate  
: 44.1 kHz or 48 kHz.  
: 112 kbps - 320 kbps  
• Files whose extension is other than “.mp3(MP3)” will  
not be listed.  
• Some unplayable folders or files may be listed due to  
the recording status.  
EN 59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC PLAYBACK  
Using the Title / Disc Menu  
Pause  
1)During playback, press [PAUSE F].  
Playback will be paused and sound will be muted.  
DVD or video CD with PBC function may contain a title  
list, which describes the contents of the disc, or a disc  
menu, which guides you through the available functions  
in the disc.  
Press [DVD] first.  
1)Insert a playable disc (refer to page 25 on how to  
insert a disc).  
* Make sure the disc is compatible with this unit. (Refer  
to page 55 for the list of compatible discs.)  
F
It may take a while to load the disc.  
2)Press [PLAY B] to return to the normal playback.  
2)Press [TITLE] or [DISC MENU] to call up the title list  
or disc menu.  
Note  
• On DVD, set “Still Mode” to “Field” in “Playback”  
menu if pictures in the pause mode are blurred.  
(Refer to page 86.)  
3)Use [K / L / { / B] to make a selection, and then  
press [OK] to enable your selection.  
4)Press [STOP C] to exit.  
Note  
• You can select a numbered menu with [the Number  
buttons] also.  
• Menus vary among discs. Refer to the information  
accompanying the disc for details.  
• [TITLE] or [DISC MENU] will not always be active  
with all DVD.  
• For video CD, when “PBC (Video CD only)” in “CD  
Playback Mode” menu is “ON”, the video CD main  
menu will appear when inserting a disc.  
60 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL PLAYBACK  
Skipping TV Commercials During  
Resume Playback  
Playback  
You can play back from where you stopped playing back  
the disc last.  
1)During playback, press [STOP C].  
The resume message will appear.  
You can skip TV commercials to enjoy the recorded  
programs without interrupting.  
During playback, press [CM SKIP].  
Resume ON  
Normal playback will start at 30 seconds ahead from the  
point you press [CM SKIP].  
Every time you press [CM SKIP], the searching point will  
be extended by 30 seconds ahead.  
You can press [CM SKIP] up to 6 times (180 seconds).  
e.g.) Press [CM SKIP] once.  
2)Press [PLAY B].  
In a few seconds, playback will resume from the point  
at which it stopped last. You can resume playback at  
the same point even if you turn off the unit.  
To cancel the resume playback and start playing back  
the disc from the beginning, press [STOP C] again  
while the playback is stopped.  
CM Skip 30 sec.  
Note  
(forwarding 30 seconds)  
• For MP3 files, playback will resume from the  
beginning of the file at which playback was stopped.  
• Some video CD with the PBC function resume  
playback from the beginning of the track.  
B
Playback will return to the normal playback.  
Fast Forward / Fast Reverse Playback  
Rapid Playback  
Rapid playback function is available only during  
playback.  
This function is available only on discs recorded in the  
Dolby Digital format, and plays back in a slightly faster/  
slower speed while keeping the sound quality just as  
normal playback.  
1)During playback, press [D] or [E].  
Every time you press [D] or [E], approximate speed  
will be changed as follows.  
Fast forward or fast reverse playback across titles (for  
DVD) or files (for MP3 files) is not possible.  
g
h
g
h
g
h
g
h
g
h
g
h
normal  
speed  
1)During playback, press [RAPID PLAY].  
40x  
20x  
5x  
2x  
20x  
40x  
playback  
Press [RAPID PLAY] once during playback.  
Plays back approximately at 0.8 times of normal  
playback.  
B
:
For video CD, approximate forward/reverse speeds are  
2x, 8x, 16x.  
For audio CD, MP3 files, approximate speed is fixed at  
8x with sound (indicated with  
Press [RAPID PLAY] twice during playback.  
Plays back approximately at 1.3 times of normal  
playback.  
B
:
/
).  
2)Press [PLAY B] to return to the normal playback.  
Press [RAPID PLAY] 3 times to play back in  
normal speed.  
No effects.  
B :  
Note  
• Forward/reverse speed will be indicated with icons  
as follows.  
forward (approx. speed)  
2)Press [PLAY B] to return to the normal playback.  
2x:  
Note  
20x:  
40x:  
• Audio (language) setting cannot be changed while  
using this mode.  
reverse (approx. speed)  
5x:  
20x:  
40x:  
• This feature may not work at some point in a disc.  
• Audio is PCM during rapid playback mode except  
when using digital audio connection.  
• When using digital audio connection (COAXIAL), the  
LPCM sound (2 channel) will be output.  
EN 61  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL PLAYBACK  
Step by Step Playback  
Zoom  
1)During playback, press [PAUSE F].  
Playback will be paused and sound will be muted.  
1)During playback, press [DISPLAY].  
2)Press [G] repeatedly.  
Playback will advance one frame (or step) at a time  
when you press [G] with the sound muted.  
2)Use [{ / B] to select  
, then press [OK] within 1  
second or wait for 1 second to display the selection  
menu.  
To play back step by step backward:  
Press [H] repeatedly.  
e.g.) DVD-video  
1/  
5
1/  
5
0:01:00 / 1:23:45  
DVD Video  
Every time you press the button, the playback will go  
backward by one frame.  
• Press and hold [H] / [G] to reverse/ advance  
continuously.  
3)Press [PLAY B] to return to the normal playback.  
3)Use [K / L] to select a desired zoom factor to zoom,  
then press [OK].  
Note  
• Only step by step forward playback is available for  
playing back video CD.  
1/  
5
1/  
5
0:01:00 / 1:23:45  
DVD Video  
× 1.2  
× 1.5  
× 2.0  
Slow Forward / Slow Reverse Playback  
Zoom menu will appear.  
There are four options  
(x1.0, x1.2, x1.5 and x2.0), these are displayed  
excluding the current zoom rate.  
1)During playback, press [PAUSE F]. Then press  
[D] or [E].  
Every time you press [D] or [E], approximate speed  
will be changed as follows. (The sound will remain  
muted.)  
Zoom area will be displayed.  
4)Use [K / L / { / B] to select a desired zoom  
position, then press [OK].  
g
h
g
h
g
h
g
h
g
h
g
h
pause  
1/4x  
1/8x  
1/16x  
1/16x  
1/8x  
1/3x  
2)Press [PLAY B] to return to the normal playback.  
Note  
• Forward/reverse speed will be indicated with icons  
as follows.  
forward (approx. speed)  
1/16x:  
1/8x:  
1/3x:  
Zoom playback will start.  
reverse (approx. speed)  
Note  
1/16x:  
1/8x:  
1/4x:  
• When selecting a smaller factor than the current one,  
the zoom area will not be displayed.  
• To exit the zoom menu, press [DISPLAY] again at  
step 1.  
• To cancel the zoom function, select “x1.0” using  
[K / L], then press [OK].  
• Only slow forward is available when playing back  
video CD.  
62 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL PLAYBACK  
Marker Setting  
Repeat Playback  
Available repeat function may vary depending the discs.  
1)During playback press [DISPLAY].  
2)Use [{ / B] to select  
, then press [OK] within 1  
This feature allows you to assign a specific point on a disc  
to be called back later.  
second or wait for 1 second to display the selection  
menu.  
1/  
5
1/  
5
0:01:00 / 1:23:45  
DVD Video  
1)During playback, press [DISPLAY].  
3)Use [K / L] to select a desired repeat type, then  
2)Use [{ / B] to select  
, then press [OK] within 1  
press [OK].  
second or wait for 1 second to display the marker  
list.  
e.g.) DVD-video  
1/  
5
1/  
5
0:01:00 / 1:23:45  
DVD Video  
e.g.) DVD-video  
1/  
5
1/  
5
0:01:00 / 1:23:45  
DVD Video  
OFF  
Title  
Chapter  
A – B  
e.g.) audio CD, video CD  
1/  
5
0:00:15 / 0:05:00  
CD  
OFF  
Track  
All  
3)Use [K / L] to select a desired marker number.  
When it reaches the desired point, press [OK].  
A – B  
1/  
5
1/  
5
0:01:00 / 1:23:45  
DVD Video  
e.g.) MP3 files  
1
1/  
5
0:00:15  
2
3
4
5
6
MP3  
OFF  
Track  
All  
Group  
The selected repeat playback will start.  
1/  
5
1/  
5
0:01:00 / 1:23:45  
DVD  
The title (track) number and the time will be displayed.  
Repeat  
Title  
4)To return to the marker later:  
Use [K / L] to select the desired marker number,  
then press [OK].  
Title:  
The current title will be played back repeatedly.  
Chapter:  
The current chapter will be played back repeatedly.  
Note  
All:  
• To clear a marker, select the marker number to be  
The current disc will be played back repeatedly.  
cleared, then press [CLEAR].  
A-B:  
• All markers will be erased when you operate these  
operations listed below.  
– Opening the disc tray  
– Turning off the power  
– Record on a recordable disc  
• You can mark up to 6 points.  
• Marker setting is not available when you play back  
the video CD with PBC function.  
Desired section can be played back repeatedly.  
1) Use [K / L] to select “A-B”, then press [OK].  
2) Press [OK] at the desired starting point A.  
3) Press [OK] at the desired ending point B.  
Track:  
The current track or file will be played back repeatedly.  
Group:  
The current folder will be played back repeatedly.  
Note  
• Point B for the repeat A-B playback should be set  
within the same title or track as point A.  
• To cancel the repeat playback, select “OFF” at step 3.  
The repeat setting will also be canceled when you  
stop playback.  
• You cannot select “Group” during the random playback.  
• Repeat playback is not available when you play back  
the video CD with PBC function.  
• During the A-B repeat, if you reaches the point A with any  
reverse playback, the reverse playback will be canceled  
and the A-B repeat playback resumes from point A.  
EN 63  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL PLAYBACK  
Random Playback  
Program Playback  
You can play back a disc randomly instead of playing  
back in the original order.  
You can program the disc to play back in your desired  
order.  
1)Press [SETUP].  
1)Press [SETUP].  
2)Use [K / L] to select “CD Playback Mode”, then press  
[OK].  
“CD Playback Mode” menu will appear.  
3)Use [K / L] to select “Random Play”, then press  
[OK].  
2)Use [K / L] to select “CD Playback Mode”, then press  
[OK].  
“CD Playback Mode” menu will appear.  
Random playback will start.  
3)Use [K / L] to select “Program Play”, then press  
[OK].  
Note  
• To cancel random playback, press [STOP C] twice  
during random playback. “OFF” appears on the TV  
screen.  
4)Use [K / L] to select a desired track, then press [OK]  
or [B].  
CD Playback Mode  
Program Play  
• For video CD with PBC function, the PBC setting will  
be switched to off automatically when you start  
random playback.  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
Total 0:00:00  
Repeat this step until you program all the desired  
tracks.  
5)Press [PLAY B].  
CD Playback Mode  
Program Play  
09 04 10 06 --  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
Total 0:31:07  
Program playback will start.  
Note  
• To erase tracks you selected, press [CLEAR] at step 4.  
• You can make program settings up to 50 tracks.  
• To cancel program playback, press [STOP C] twice  
during program playback. “OFF” appears on the TV  
screen.  
• You may also select a desired track using [the  
Number buttons] at step 4.  
• For video CD with PBC function, the PBC setting will  
be switched to off automatically when you start  
program playback.  
64 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SEARCH  
Title / Chapter Search  
Track Search  
Using [H] / [G]  
Using [H] / [G]  
1)During playback, press [G] to skip the current  
track/file and move to the next.  
1)During playback, press [G] to skip the current  
title or chapter and move to the next.  
The track/file will move forward one at a time.  
To go back to the beginning of the current track/file,  
press [H].  
Press it repeatedly to go to the previous track/file. The  
track/file will move backward one at a time.  
The title or chapter will move forward by one at a time.  
• If there is no chapter in one title, the current title will  
be skipped.  
To go back to the beginning of the current title or  
chapter, press [H].  
Press it repeatedly to go to the previous title or  
chapter. The title or chapter will move backward one  
at a time.  
Using [DISPLAY]  
1)During playback, press [DISPLAY].  
2)Use [{ / B] to select  
e.g.) audio CD  
, then press [OK].  
Using [DISPLAY]  
1)During playback, press [DISPLAY].  
1/  
5
0:00:15 / 0:05:00  
CD  
2)Use [{ / B] to select  
, then press [OK].  
e.g.) DVD-video  
1/  
5
1/  
5
0:01:00 / 1:23:45  
DVD Video  
e.g.) MP3 files  
1/  
5
0:00:15  
MP3  
The number next to  
3)Title:  
will be highlighted.  
The number next to  
will be highlighted.  
Use [K / L] or [the Number buttons] to enter a  
3)Use [K / L] or [the Number buttons] to enter a  
desired track/file number to search, then press  
[OK].  
desired title number to search, then press [OK].  
Title search will start.  
Chapter:  
After the search, playback will start automatically.  
Press [B] to move to the number next to  
chapter.  
for  
Use [K / L] or [the Number buttons] to enter a  
desired chapter number to search, then press [OK].  
Note  
After the search, playback will start automatically.  
• During CD playback you can enter a track number  
directly using [the Number buttons] for track search  
without displaying the menu.  
• Track search is not available when you play back the  
video CD with PBC function.  
Note  
• In search mode display, total numbers of each search  
contents (title/chapter/time) are shown as a  
denominator.  
1/  
5
1/  
5
0:01:00 / 1:23:45  
DVD Video  
total number  
of titles  
total time  
of the title  
total number  
of chapters  
EN 65  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SEARCH  
Time Search  
1)During playback, press [DISPLAY].  
2)Use [{ / B] to select  
, then press [OK].  
e.g.) DVD-video  
1/  
5
1/  
5
0:01:00 / 1:23:45  
DVD Video  
e.g.) audio CD  
1/  
5
0:00:15 / 0:05:00  
CD  
The number next to  
will be highlighted.  
To move to the number next to  
, press [B].  
When time search is not available,  
counter are not displayed.  
and time  
3)Use [K / L / { / B] or [the Number buttons] to  
enter a desired time to search, then press [OK].  
After the search, playback will start automatically.  
Note  
• Time search is available only in the same track, file or  
title.  
• Time search is not available when you play back the  
video CD with PBC function.  
66 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SELECTING THE FORMAT OF AUDIO AND VIDEO  
You can select the format of audio and video as you prefer depending on the contents of the disc you are playing back.  
Switching Subtitles  
Switching Audio Soundtrack  
DVD-video may have subtitles in 1 or more languages.  
Available subtitle languages can be found on the disc  
case. You can switch subtitle languages anytime during  
playback.  
When playing back a DVD-video recorded with 2 or more  
soundtracks (these are often in different languages), you  
can switch them during playback.  
When playing back video CD, audio CD you can switch  
“L/R”(stereo), “L”(left) or “R”(right).  
1)During playback, press [DISPLAY].  
1)During playback press [DISPLAY], then proceed to  
step 2), or press [AUDIO] then proceed to step 3).  
2)Use [{ / B] to select  
, then press [OK] within 1  
second or wait for 1 second to display the selection  
menu.  
2)Use [{ / B] to select  
, then press [OK] within 1  
second or wait for 1 second to display the selection  
menu.  
e.g.) DVD-video  
1/  
5
1/  
5
0:01:00 / 1:23:45  
DVD Video  
3)Use [K / L] to select a desired audio soundtrack or  
audio channel, then press [OK].  
For DVD-video  
• Audio soundtrack will switch.  
3)Use [K / L] to select a desired subtitle language,  
then press [OK].  
1/  
5
1/  
5
0:01:00 / 1:23:45  
DVD Video  
1.Dolby Digital 5.1ch English  
2.Dolby Digital 2ch English  
1/  
5
1/  
5
0:01:00 / 1:23:45  
DVD Video  
OFF  
1.English  
• If the title contains both main and sub audio, you can  
further select “L” (main), “R” (sub), or “L/R” (mixed of  
main and sub).  
For audio CD, video CD  
• Audio channel will switch.  
e.g.) audio CD  
Subtitle will be displayed in the selected language.  
When selecting “OFF”, subtitle will disappear.  
Note  
1/  
5
0:00:15 / 0:05:00  
• Some discs will only allow you to change the subtitle  
from the disc menu. Press [TITLE] or [DISC MENU] to  
display the disc menu.  
• If a 4-digit language code appears in the subtitle  
menu, refer to the “LANGUAGE CODE” on page 100.  
CD  
1. L/R  
2. L  
3. R  
Note  
• Some discs will only allow you to change the  
soundtrack from the disc menu. Press [TITLE] or  
[DISC MENU] to display the disc menu.  
EN 67  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SELECTING THE FORMAT OF AUDIO AND VIDEO  
Switching Virtual Surround System  
Switching Camera Angles  
Some DVD-video have scenes shot from 2 or more  
angles. Angle information should be on the disc case if  
the disc contains multi-angle scenes.  
You can enjoy stereophonic virtual space through your  
existing 2 channel stereo system.  
1)During playback, press [DISPLAY].  
1)During playback, press [DISPLAY].  
2)Use [{ / B] to select  
, then press [OK].  
e.g.) DVD-video  
2)Use [{ / B] to select  
, then press [OK] within 1  
second or wait for 1 second to display the selection  
1/  
5
1/  
5
0:01:00 / 1:23:45  
DVD Video  
menu.  
e.g.) DVD-video  
1/  
5
1/  
5
0:01:00 / 1:23:45  
DVD Video  
3)Use [K / L] to select “OFF”, “Type 1” or “Type 2”,  
Angle icon appears when a switching camera angle is  
available.  
then press [OK].  
e.g.) DVD-video  
Angle will switch each time you press [OK].  
1/  
5
1/  
5
0:01:00 / 1:23:45  
DVD Video  
OFF  
Type 1  
Type 2  
Note  
• Angle icon does not appear on the TV screen in a  
case you set “Angle Icon” to “OFF” in “Playback”  
menu. Refer to page 86.  
OFF  
: no effect  
Type 1 : natural effect  
Type 2 : emphasized effect  
Reducing Block Noise  
Note  
• Select “OFF” in a case sound is distorted.  
• The setting will be kept even when the unit is turned  
off.  
This function reduces noise in the playback picture.  
1)During playback, press [DISPLAY].  
2)Use [{ / B] to select  
, then press [OK] within 1  
second or wait for 1 second to display the selection  
menu.  
e.g.) DVD-video  
1/  
5
1/  
5
0:01:00 / 1:23:45  
DVD Video  
3)Use [K / L] to select a desired option, then press  
[OK].  
1/  
5
1/  
5
0:01:00 / 1:23:45  
DVD Video  
OFF  
Type 1  
Type 2  
Your setting will be activated.  
OFF  
: When playing back titles with a few noises  
such as DVD-video.  
Type 1 : For the titles recorded in long time mode  
such as EP or SLP mode.  
Type 2 : Same as type 1, only more effective.  
68 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INFORMATION ON DISC EDITING  
Guide to a Title List  
Editing Discs  
Title list allows you to check the titles recorded on the  
disc easily. You can choose a title to play back from this  
list and easily edit the titles as you prefer.  
You can edit discs for the following items. Be sure that  
once you edit titles, they will not remain as original.  
• Deleting Titles (Refer to page 70.)  
• Putting Names on Titles (Refer to page 71.)  
• Setting Chapter Marks (Refer to page 72.)  
• Clearing Chapter Marks (Refer to pages 73-74.)  
• Hiding Chapters (Refer to page 75.)  
Press [DVD], then press [TITLE].  
1
1
SP (2Hr)  
• Setting Pictures for Thumbnails (Refer to page 76.)  
• Dividing a Title (DVD+RW/DVD-RW only)  
(Refer to page 77.)  
• Putting Name on Disc (Refer to page 78.)  
• Erasing Disc (Refer to page 79.)  
• Making Edits Compatible (Refer to page 80.)  
NOV/21/08 11:00AM CH12 SP  
NOV/21/08 0:20:44  
2
Play  
Edit  
Overwrite  
NOV/22/08 11:35AM CH13 EP  
NOV/22/08 0:10:33  
3
EMPTY TITLE  
1:37:52 SP(2Hr)  
Note  
6
• When selecting “Edit” on pop-up menu of the title  
list and edit the title, the title list is displayed after  
writing the edited contents onto the disc.  
• The capacity indicator in the right side of the title list  
may not indicate the precise capacity in the disc.  
Edit  
Title Delete  
2
Edit Title Name  
Chapter Mark  
Hide Chapter  
Index Picture  
Title Dividing  
• The capacity indicator may not indicate the capacity  
for the titles of which recording time is short.  
• Once you have finalized a DVD+R/ DVD-R, you  
cannot edit or record anything on that disc.  
NOV/22/08 11:35AM CH13 EP  
1 : 05 : 00  
11 10  
9
8
7
1. Title list: List of the titles recorded on the disc, and  
their information.  
2. Arrow: Indicating there is a previous / next page.  
3. Title information: On the first line, title name  
(editable) is displayed. On the second line, the length  
of the title is displayed.  
Empty title: The portion of the disc where there is no  
recordings are made. As for the empty title, available  
recording time by the selected recording mode is  
displayed on the second line.  
4. Recording mode: Currently selected recording mode  
is displayed here.  
5. Capacity indicator: Indicating the position and the  
amount of each title in the disc. The portion for the  
selected title is highlighted.  
6. Thumbnails: A cut from the recorded content is  
displayed here.  
7. Submenu: Submenus for the selected menu are  
displayed here.  
8. Title name (editable): If you do not name the title,  
the recorded date, time, channel, and the recording  
mode are displayed here.  
9. Progress bar: Indicating the progress of the  
playback.  
10. Preview window: Preview of the selected title is  
displayed here.  
11. Playback status: Indicating the current playback  
status of the selected title.  
Press [STOP C] to exit the title list.  
EN 69  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EDITING DISCS  
Deleting Titles  
You can delete titles which you do not need anymore.  
Please be advised that the titles once deleted cannot be  
brought back to the disc.  
Use [K / L] to select “Edit”, then  
press [OK].  
For DVD+RW/DVD-RW, when the last recorded title in the  
title list is deleted, the available disc space to record on  
will be increased. For DVD+R/DVD-R, the disc space to  
record on will not be changed.  
3
4
5
SP (2Hr)  
1
Play  
Edit  
Overwrite  
NOV/21/08 11:00AM CH12 SP  
NOV/21/08 0:20:44  
2
NOV/22/08 11:35AM CH13 EP  
NOV/22/08 0:10:33  
3
4
5
6
EMPTY TITLE  
1:37:52 SP(2Hr)  
PQRS  
TUV  
WXYZ  
7
8
SPACE  
9
CLEAR  
.
0
Use [K / L] to select “Title Delete”,  
DISC MENU  
SETUP  
then press [OK].  
o
Edit  
s
B
OK  
p
Title Delete  
1
TITLE  
RETURN  
Edit Title Name  
Chapter Mark  
Hide Chapter  
Index Picture  
Title Dividing  
j
F
i
B
h
g
C
NOV/21/08 11:00AM CH12 SP  
1 : 05 : 00  
CHANNEL  
--  
+
REC MODE VCR  
DVD  
TIMER  
AUDIO  
Use [K / L] to select “Yes”, then press  
[OK].  
REC  
HDMI  
I
Edit - Title Delete  
CM SKIP D.DUBBING TIMER SET RAPID PLAY  
SEARCH  
Yes  
1
No  
NOV/21/08 11:00AM CH12 SP  
1 : 05 : 00  
Press [DVD] first.  
Press [TITLE].  
After that, “Are you sure?” will appear, select  
“Yes” and then press [OK].  
1
2
Title will be deleted.  
Data will be written onto the disc momentarily.  
e.g.) DVD+R/DVD-RW/-R  
Use [K / L] to select a desired title,  
then press [OK].  
Please finalize the disc when the writing is  
completed before playing back on other DVD  
players.  
SP (2Hr)  
1
Writing to Disc  
90%  
NOV/21/08 11:00AM CH12 SP  
NOV/21/08 0:20:44  
2
This operation may take a  
while to be completed.  
NOV/22/08 11:35AM CH13 EP  
NOV/22/08 0:10:33  
3
After editing is complete, the title list will appear.  
e.g.) DVD+RW/DVD-RW  
EMPTY TITLE  
1:37:52 SP(2Hr)  
SP (2Hr)  
1
EMPTY TITLE  
0:21:14 SP(2Hr)  
2
Note  
NOV/22/08 11:35AM CH13 EP  
NOV/22/08 0:10:33  
• Deleted part of the titles in the capacity indicator  
changes in color.  
3
EMPTY TITLE  
1:37:52 SP(2Hr)  
• As for DVD+RW/DVD-RW if you delete the title, deleted  
title will be displayed as “EMPTY TITLE”.  
70 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EDITING DISCS  
Putting Names on Titles  
You can put title names on the titles and change the  
names from this menu.  
Use [K / L] to select “Yes”, then press  
[OK].  
STANDBY-ON  
4
5
Edit - Edit Title Name  
Yes  
1
SOURCE  
.@/:  
DTV/TV  
DISPLAY OPEN/CLOSE  
No  
A
ABC  
DEF  
1
GHI  
4
2
JKL  
5
3
MNO  
6
MY FAVORITE  
1 : 05 : 00  
PQRS  
TUV  
WXYZ  
7
8
9
CLEAR  
The name you entered will be activated for the title.  
SPACE  
.
0
After this operation is completed,  
press [RETURN] to exit.  
Data will be written onto the disc momentarily.  
DISC MENU  
SETUP  
o
s
B
OK  
p
This operation may take a  
while to be completed.  
TITLE  
RETURN  
j
F
i
B
h
g
C
Guide to Edit Title Name  
1)Use [K / L] to select a desired character set, then  
press [OK].  
CHANNEL  
--  
+
2)Follow the list below, use [the Number buttons]  
repeatedly until the desired letter appears.  
Follow steps 1 to 3 in “Deleting  
Titles” on page 70 to display “Edit”  
menu.  
Select  
ABC  
abc  
123  
@ ! ?  
1
2
Press  
0
<space>  
<space>  
<space>  
0
Use [K / L] to select “Edit Title  
Name”, then press [OK].  
! ”# $ % & ’( )  
+ , - . / : ; < = >  
1
*
(*1)  
(*1)  
1
? @ [ ] ^ _ { | }  
Edit  
2
3
4
5
6
7
8
9
(*2)  
(*2)  
(*2)  
(*2)  
(*2)  
(*2)  
(*2)  
(*2)  
ABC  
DEF  
abc  
def  
2
3
4
5
6
7
8
9
Title Delete  
1
Edit Title Name  
Chapter Mark  
Hide Chapter  
Index Picture  
Title Dividing  
GHI  
ghi  
JKL  
jkl  
MNO  
PQRS  
TUV  
WXYZ  
mno  
pqrs  
tuv  
NOV/21/08 11:00AM CH12 SP  
1 : 05 : 00  
wxyz  
To enter a title name, follow the  
steps of “Guide to Edit Title Name”  
on this page.  
1
*1 Press  
, character set will be changed to the “ @!? ”  
mode automatically.  
3
2
9
*2 Press  
to  
, character set will be changed to the  
Edit - Edit Title Name  
previous input mode automatically.  
• To delete letters, press [CLEAR] repeatedly.  
A
a
B
b
2
!
C
c
3
?
1
character set  
Holding [CLEAR] to delete all letters.  
1
• Use [s / B] to move the cursor to the left and right.  
@
• You can enter up to 30 letters.  
M
Note  
1 : 05 : 00  
• Undefined letters in a title name are shown by “*”. If  
you delete them, adjoining letters may change to “*”  
or other.  
area for entering title names  
When you finish entering a title name, press [OK].  
EN 71  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EDITING DISCS  
Setting Chapter Marks  
You can put chapter marks in each title. Once a chapter is  
marked, you can use it for the chapter search feature.  
Follow steps 1 to 3 in “Deleting  
Titles” on page 70 to display “Edit”  
menu.  
1
2
3
STANDBY-ON  
Use [K / L] to select “Chapter Mark”,  
then press [OK].  
Submenu will appear.  
SOURCE  
.@/:  
DTV/TV  
DISPLAY OPEN/CLOSE  
A
ABC  
DEF  
1
GHI  
4
2
JKL  
5
3
MNO  
6
Press [PLAY B] and then [PAUSE F]  
to decide the point at which you will  
create a new chapter mark.  
• It is convenient to use [H], [G],  
[E] and [D] for finding the point to add a  
new chapter mark.  
PQRS  
TUV  
WXYZ  
7
8
SPACE  
9
CLEAR  
.
0
DISC MENU  
SETUP  
o
Use [K / L] to select “Add”, then press  
[OK].  
s
B
OK  
p
TITLE  
RETURN  
4
Edit - Chapter Mark  
Add  
1
Delete  
j
F
i
B
Delete All  
Chapter  
2/  
2
h
g
C
CHANNEL  
--  
+
NOV/21/08 11:00AM CH12 SP  
1 : 05 : 00  
REC MODE VCR  
DVD  
TIMER  
AUDIO  
REC  
HDMI  
Use [K / L] to select “Yes”, then press  
[OK].  
I
CM SKIP D.DUBBING TIMER SET RAPID PLAY  
SEARCH  
5
Edit - Chapter Mark - Add  
Yes  
1
No  
Chapter  
2/  
2
F
NOV/21/08 11:00AM CH12 SP  
1 : 05 : 00  
A new chapter mark will be added.  
Press [RETURN] twice to exit.  
Data will be written onto the disc momentarily.  
6
This operation may take a  
while to be completed.  
Note  
• When the number of chapter marks in a title is 99  
and the number of chapter marks in a disc is 254,  
chapter marks cannot be added.  
• Besides the above-mentioned, it is not likely to be  
able to add according to recorded time and number  
of chapters.  
• Remaining time of the disc may decrease when  
adding chapter marks or increase when clearing  
chapter marks depending on the recording time or  
edited contents.  
72 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EDITING DISCS  
Clearing Chapter Marks  
Follow steps 1 to 3 in “Deleting  
Titles” on page 70 to display “Edit”  
menu.  
STANDBY-ON  
1
2
3
4
5
SOURCE  
.@/:  
DTV/TV  
DISPLAY OPEN/CLOSE  
Use [K / L] to select “Chapter Mark”,  
then press [OK].  
Submenu will appear.  
A
ABC  
DEF  
1
GHI  
4
2
JKL  
5
3
MNO  
6
Use [H] / [G] to select a chapter  
mark to be deleted.  
PQRS  
TUV  
WXYZ  
7
8
9
CLEAR  
SPACE  
.
0
DISC MENU  
SETUP  
Use [K / L] to select “Delete”, then  
press [OK].  
o
s
B
OK  
p
TITLE  
RETURN  
Use [K / L] to select “Yes”, then press  
[OK].  
j
F
i
B
Edit - Chapter Mark - Delete  
h
g
C
Yes  
1
CHANNEL  
No  
--  
+
Chapter  
2/  
2
REC MODE VCR  
DVD  
TIMER  
AUDIO  
F
REC  
HDMI  
NOV/21/08 11:00AM CH12 SP  
I
1 : 05 : 00  
CM SKIP D.DUBBING TIMER SET RAPID PLAY  
SEARCH  
The selected chapter mark will be deleted.  
Press [RETURN] twice to exit.  
Data will be written onto the disc momentarily.  
6
This operation may take a  
while to be completed.  
Note  
• Remaining time of the disc may decrease when  
adding chapter marks or increase when clearing  
chapter marks depending on the recording time or  
edited contents.  
• You cannot delete the chapter mark 1.  
EN 73  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EDITING DISCS  
Clearing Chapter Marks (cont’d)  
STANDBY-ON  
To delete all chapter marks:  
SOURCE  
.@/:  
DTV/TV  
DISPLAY OPEN/CLOSE  
A
Follow steps 1 to 3 in “Deleting  
Titles” on page 70 to display “Edit”  
menu.  
ABC  
DEF  
1
GHI  
4
2
JKL  
5
3
MNO  
6
1
2
3
4
PQRS  
TUV  
WXYZ  
Use [K / L] to select “Chapter Mark”,  
then press [OK].  
Submenu will appear.  
7
8
9
CLEAR  
SPACE  
.
0
DISC MENU  
SETUP  
Use [K / L] to select “Delete All”,  
then press [OK].  
o
s
B
OK  
p
TITLE  
RETURN  
Use [K / L] to select “Yes”, then press  
[OK].  
j
F
i
B
Edit - Chapter Mark - Delete All  
h
g
C
CHANNEL  
Yes  
1
No  
--  
+
Chapter  
2/  
2
REC MODE VCR  
DVD  
TIMER  
AUDIO  
F
REC  
HDMI  
NOV/21/08 11:00AM CH12 SP  
I
1 : 05 : 00  
CM SKIP D.DUBBING TIMER SET RAPID PLAY  
SEARCH  
Use [K / L] to select “Yes”, then press  
[OK].  
5
6
Edit - Chapter Mark - Delete All  
Are you sure?  
1
Yes  
No  
Chapter  
2/  
2
NOV/21/08 11:00AM CH12 SP  
1 : 05 : 00  
All chapter marks will be deleted.  
Press [RETURN] twice to exit.  
Data will be written onto the disc momentarily.  
This operation may take a  
while to be completed.  
Note  
• Remaining time of the disc may decrease when  
adding chapter marks or increase when clearing  
chapter marks depending on the recording time or  
edited contents.  
74 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EDITING DISCS  
Hiding Chapters  
You can hide chapters from the title list.  
Hidden chapters are skipped during playback.  
Follow steps 1 to 3 in “Deleting  
Titles” on page 70 to display “Edit”  
menu.  
1
2
3
4
STANDBY-ON  
Use [K / L] to select “Hide Chapter”,  
then press [OK].  
Submenu will appear.  
SOURCE  
.@/:  
DTV/TV  
DISPLAY OPEN/CLOSE  
A
ABC  
DEF  
1
GHI  
4
2
JKL  
5
3
MNO  
6
Use [H] / [G] to decide the  
chapter to be hidden.  
PQRS  
TUV  
WXYZ  
7
8
SPACE  
9
CLEAR  
.
Use [K / L] to select “Hidden”, then  
press [OK].  
0
DISC MENU  
SETUP  
o
Edit - Hide Chapter  
s
B
Visible  
1
OK  
p
Hidden  
TITLE  
RETURN  
Chapter  
2/  
2
Visible  
j
F
i
B
NOV/21/08 11:00AM CH12 SP  
h
g
C
1 : 05 : 00  
CHANNEL  
--  
+
After this operation is completed,  
press [RETURN] twice to exit.  
Data will be written onto the disc momentarily.  
REC MODE VCR  
DVD  
TIMER  
AUDIO  
REC  
HDMI  
5
I
CM SKIP D.DUBBING TIMER SET RAPID PLAY  
SEARCH  
This operation may take a  
while to be completed.  
If you want hidden chapters to be “Visible”,  
select the chapter to be shown. Then use  
[K / L] to select “Visible” at the step 4 on this  
page.  
Data will be written onto the disc momentarily.  
After that, title list is displayed.  
Note  
• ”Hidden” will be displayed in the preview window  
while previewing the hidden chapter.  
• When you make all chapters in the title “Hidden”,  
“Hidden” is displayed in a thumbnail of the title list.  
SP (2Hr)  
1
Hidden  
NOV/21/08 11:00AM CH12 SP  
NOV/21/08 0:20:44  
2
NOV/22/08 11:35AM CH13 EP  
NOV/22/08 0:10:33  
3
EMPTY TITLE  
1:37:52 SP(2Hr)  
EN 75  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EDITING DISCS  
Setting Pictures for Thumbnails  
You can set your desired scene as a thumbnail for each  
title.  
Follow steps 1 to 3 in “Deleting  
Titles” on page 70 to display “Edit”  
menu.  
STANDBY-ON  
1
2
SOURCE  
.@/:  
DTV/TV  
DISPLAY OPEN/CLOSE  
Use [H], [G], [E], [D], [PAUSE  
F] and [PLAY B] to decide the  
picture you want to select as a  
thumbnail.  
A
ABC  
DEF  
1
GHI  
4
2
JKL  
5
3
MNO  
6
PQRS  
TUV  
WXYZ  
Use [K / L] to select “Index Picture”,  
then press [OK].  
7
8
SPACE  
9
CLEAR  
.
3
0
DISC MENU  
SETUP  
o
Use [K / L] to select “Yes”, then press  
[OK].  
s
B
OK  
p
4
Edit - Index Picture  
TITLE  
RETURN  
1
Yes  
No  
j
F
i
B
h
g
C
F
CHANNEL  
NOV/21/08 11:00AM CH12 SP  
--  
+
1 : 05 : 00  
REC MODE VCR  
DVD  
TIMER  
AUDIO  
A picture for thumbnail will be set.  
REC  
HDMI  
I
Press [RETURN] to exit.  
CM SKIP D.DUBBING TIMER SET RAPID PLAY  
SEARCH  
Data will be written onto the disc momentarily.  
5
This operation may take a  
while to be completed.  
Note  
• If the selected picture for a thumbnail is overwritten,  
the index picture is reset to the first scene of the title.  
76 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EDITING DISCS  
Dividing a Title  
Follow steps 1 to 3 in “Deleting  
Titles” on page 70 to display “Edit”  
menu.  
You can divide one title into 2 new titles.  
1
2
3
4
Use [H], [G], [E], [D], [PAUSE  
F] and [PLAY B] to decide the point  
at which you will divide the title.  
STANDBY-ON  
SOURCE  
.@/:  
DTV/TV  
DISPLAY OPEN/CLOSE  
A
ABC  
DEF  
Use [K / L] to select “Title Dividing”,  
then press [OK].  
1
GHI  
4
2
JKL  
5
3
MNO  
6
PQRS  
TUV  
WXYZ  
Use [K / L] to select “Yes”, then press  
[OK].  
7
8
SPACE  
9
CLEAR  
.
0
Edit - Title Dividing  
DISC MENU  
SETUP  
o
1
Yes  
No  
s
B
OK  
p
TITLE  
RETURN  
F
NOV/21/08 11:00AM CH12 SP  
j
F
i
B
1 : 05 : 00  
h
g
C
The title will be divided into 2 new titles.  
CHANNEL  
Both title names are identical, and index pictures  
are reset to the first scene at this point.  
--  
+
REC MODE VCR  
DVD  
TIMER  
AUDIO  
Data will be written onto the disc momentarily.  
REC  
HDMI  
This operation may take a  
while to be completed.  
I
CM SKIP D.DUBBING TIMER SET RAPID PLAY  
SEARCH  
Note  
• You cannot divide a title of the disc when the  
number of recording titles reaches the maximum of  
49, and the number of recording chapters reaches  
the maximum of 254.  
EN 77  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EDITING DISCS  
Putting Name on Disc  
You can put a name on the disc and change it from this  
menu.  
Press [STOP C] if you are playing back a disc.  
Press [SETUP].  
STANDBY-ON  
1
SOURCE  
.@/:  
DTV/TV  
DISPLAY OPEN/CLOSE  
A
Use [K / L] to select “Disc Edit”, then  
press [OK].  
ABC  
DEF  
1
GHI  
4
2
JKL  
5
3
MNO  
6
2
PQRS  
TUV  
WXYZ  
Use [K / L] to select “Edit Disc  
Name”, then press [OK].  
e.g.) DVD+RW  
7
8
9
CLEAR  
SPACE  
3
.
0
Disc Edit  
DISC MENU  
SETUP  
Edit Disc Name  
Erase Disc  
Make Edits Compatible  
o
Disc Protect OFF  
ON  
s
B
OK  
p
TITLE  
RETURN  
A window for entering a title name will appear.  
Edit Disc Name  
j
F
i
B
A
a
B
b
2
!
C
c
3
?
h
g
C
No Disc Name  
1
Disc  
DVD+RW  
3
@
Total Titles  
CHANNEL  
Disc Space Used  
Disc Protect  
0:30:48  
OFF  
--  
+
Make Edits Compatible  
Needed  
REC MODE VCR  
DVD  
TIMER  
AUDIO  
REC  
HDMI  
I
CM SKIP D.DUBBING TIMER SET RAPID PLAY  
SEARCH  
To enter a disc name, follow the steps  
of “Guide to Edit Title Name” on page  
71.  
4
5
When you finish entering a title name, press  
[OK].  
Use [K / L] to select “Yes”, then press  
[OK].  
Edit Disc Name  
Yes  
No  
No Disc Name  
Disc  
DVD+RW  
3
Total Titles  
Disc Space Used  
Disc Protect  
Make Edits Compatible  
0:30:48  
OFF  
Needed  
MY FAVORITE DISC  
The name you entered will be activated for the title.  
Data will be written onto the disc momentarily.  
This operation may take a  
while to be completed.  
Note  
• You cannot select “Disc Edit” when finalized DVD+R  
or DVD-R is inserted.  
78 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EDITING DISCS  
Erasing Disc  
Press [STOP C] if you are playing back a disc.  
You can erase all titles on a disc.  
Follow steps 1 to 2 in “Putting Name  
on Disc” on page 78 to display “Disc  
Edit” menu.  
STANDBY-ON  
1
2
SOURCE  
.@/:  
DTV/TV  
DISPLAY OPEN/CLOSE  
Use [K / L] to select “Erase Disc”,  
then press [OK].  
e.g.) DVD+RW  
A
ABC  
DEF  
1
GHI  
4
2
JKL  
5
3
MNO  
6
Disc Edit  
Edit Disc Name  
Erase Disc  
Make Edits Compatible  
PQRS  
TUV  
WXYZ  
7
8
9
CLEAR  
Disc Protect OFF  
ON  
SPACE  
.
0
DISC MENU  
SETUP  
o
s
B
OK  
p
TITLE  
RETURN  
Use [K / L] to select “Yes”, then press  
[OK].  
j
F
i
B
3
When you press “Yes”, all the  
contents in the disc will be erased.  
Are you sure to erase the disc?  
h
g
C
CHANNEL  
--  
+
Yes  
No  
REC MODE VCR  
DVD  
TIMER  
AUDIO  
Data will be written onto the disc momentarily.  
REC  
HDMI  
I
This operation may take a  
while to be completed.  
CM SKIP D.DUBBING TIMER SET RAPID PLAY  
SEARCH  
Note  
• When you select “Yes” at step 3, all contents of the  
disc will be erased.  
EN 79  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EDITING DISCS  
Making Edits Compatible  
Press [STOP C] if you are playing back a disc.  
If you have added or deleted chapters, or made chapters  
hidden, you must perform “Make Edits Compatible” to  
see those effects on other unit.  
Follow steps 1 to 2 in “Putting Name  
on Disc” on page 78 to display “Disc  
1
2
Edit” menu.  
STANDBY-ON  
Use [K / L] to select “Make Edits  
Compatible”, then press [OK].  
SOURCE  
.@/:  
DTV/TV  
DISPLAY OPEN/CLOSE  
A
Disc Edit  
ABC  
DEF  
1
GHI  
4
2
JKL  
5
3
MNO  
6
Edit Disc Name  
Erase Disc  
Make Edits Compatible  
Disc Protect OFF  
ON  
PQRS  
TUV  
WXYZ  
7
8
9
SPACE  
CLEAR  
.
0
DISC MENU  
SETUP  
o
Use [K / L] to select “Yes”, then press  
[OK].  
s
B
OK  
p
TITLE  
RETURN  
3
Activate the Make Edits Compatible?  
j
F
i
B
Yes  
No  
h
g
C
Data will be written onto the disc momentarily.  
CHANNEL  
--  
+
This operation may take a  
while to be completed.  
REC MODE VCR  
DVD  
TIMER  
AUDIO  
REC  
HDMI  
I
CM SKIP D.DUBBING TIMER SET RAPID PLAY  
SEARCH  
80 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LIST OF SETTINGS  
The following table is the contents which you can set and the default setting.  
Refer to the following table for useful operation.  
Setup  
Playback  
Pages 84-86  
Items (highlight is the default)  
Parental Lock  
Contents  
Set the parental level for DVD playback.  
OFF  
level 8 [Adult] to 1 [Kid Safe]  
Disc Audio  
Dynamic Range  
Control  
Compressing the range of sound volume.  
ON  
OFF  
PCM  
Set whether the sound recorded in 96kHz will  
be down sampled in 48kHz.  
48kHz  
96kHz  
PCM  
Dolby Digital  
Set the type of sound signal which outputs  
from the digital audio output jack.  
Stream  
Disc Menu Language  
Set the language for disc menu language.  
English  
French  
Spanish  
Other  
Audio Language  
Set the language for audio.  
Original  
English  
French  
Spanish  
Other  
Subtitle Language  
Set the language for subtitles.  
OFF  
English  
French  
Spanish  
Other  
Angle Icon  
Still Mode  
Set whether or not to display the angle icon.  
Set the type of still image in pausing playback.  
ON  
OFF  
Auto  
Field  
Frame  
Display  
Pages 87-89  
OSD Language  
Screen Saver  
Set the language for OSD (on-screen display).  
English  
Français  
Español  
OFF  
5minutes  
Set the idling time before the screen saver  
starts.  
10minutes  
15minutes  
30minutes  
FL Dimmer  
Auto  
Bright  
Dark  
Set the brightness of the front panel display.  
Set the type of the DTV closed caption.  
DTV CC  
Caption Service  
page 35  
OFF  
Service1  
Service2  
Service3  
Service4  
Service5  
Service6  
Recording  
ON  
OFF  
Set whether to record the DTV closed caption  
or not.  
page 40  
CC Style  
pages 36-37  
User Setting  
ON  
OFF  
Set the CC style setting whether or not is  
effective.  
Font Size  
Font Style  
Large  
Middle  
Small  
Set font size of the displayed caption.  
Set font style of the displayed caption.  
Style1  
Style2  
Style3  
Style4  
Style5  
Style6  
Style7  
Style8  
Font Opacity  
Solid  
Set the font opacity of the displayed caption.  
Transparent  
Translucent  
Flash  
EN 81  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LIST OF SETTINGS  
Setup  
Display  
Pages 87-89  
Items (highlight is the default)  
CC Style Font Color  
pages 36-37  
Contents  
Set the font color of the displayed caption.  
White  
Black  
Red  
Green  
Blue  
Yellow  
Magenta  
Cyan  
Edge Type  
Edge Color  
Set edge type of the displayed caption.  
Set edge color of the displayed caption.  
None  
Raised  
Depressed  
Uniform  
L.Shadow  
R.Shadow  
White  
Black  
Red  
Green  
Blue  
Yellow  
Magenta  
Cyan  
Back Opacity  
Back Color  
Set back opacity of the displayed caption.  
Set back color of the displayed caption.  
Solid  
Transparent  
Translucent  
Flash  
White  
Black  
Red  
Green  
Blue  
Yellow  
Magenta  
Cyan  
V-Chip  
MPAA Rating  
TV Rating  
X
Set the viewing limitation according to US  
movie ratings.  
NC-17  
R
PG-13  
PG  
G
NR  
TV-MA  
TV-14  
TV-PG  
TV-G  
TV-Y7  
TV-Y  
Set the viewing limitation according to US TV  
program ratings.  
NR  
Canadian French 18 ans+  
Set the viewing limitation according to  
Canadian French language Ratings.  
Rating  
16 ans+  
13 ans+  
8 ans+  
G
E
Canadian  
English Rating  
18+  
14+  
PG  
G
Set the viewing limitation according to  
Canadian English language Ratings.  
C8+  
C
E
Downloadable  
Rating  
BLOCK SETTING  
To set the rating.  
CLEAR DOWNLOADABLE  
RATING  
Clear the downloadable rating information  
and its setting.  
Change  
Password  
Change the password.  
Video  
Page 90  
Progressive Scan  
TV Aspect  
ON  
Set to the progressive scan mode (set to "ON")  
or to the interlace scan mode (set to "OFF").  
OFF  
Set a picture size according to aspect ratio of  
your TV.  
4:3 Letter Box  
4:3 Pan & Scan  
16:9 Wide  
82 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LIST OF SETTINGS  
Setup  
Video  
Page 90  
Items (highlight is the default)  
Contents  
Video Input  
L1(Rear)  
Set the video input type for the external input.  
Video In  
S-Video In  
Video In  
Page 48  
L2(Front)  
S-Video In  
Recording  
Auto Chapter  
Page 39  
OFF  
5 minutes  
10 minutes  
Insert chapter marks at even time interval.  
15 minutes  
30 minutes  
60 minutes  
Auto Finalize  
Page 54  
Disc Full  
ON  
Set the unit to finalize the disc automatically.  
Set the dubbing direction.  
OFF  
End of Timer Rec ON  
OFF  
Dubbing Mode  
Pages 50-51  
VCR DVD  
DVD VCR  
Make Recording Compatible  
Page 39  
ON  
OFF  
Set to prohibiting additional recording (OFF)  
or to replace the title list after recording (ON).  
Clock  
Pages 30-31  
Clock Setting  
Auto Clock Setting  
Set the clock.  
Set the clock automatically.  
OFF  
Auto  
Manual  
Daylight Saving Time  
Auto Channel Preset  
Manual Channel Preset  
Set the clock for the daylight saving time.  
Tune the channels automatically.  
Tune the channels manually.  
ON(MAR-NOV)  
ON(APR-OCT)  
OFF  
Channel  
Pages 27-29  
Antenna  
Cable (Analog)  
Cable (Analog/Digital)  
TV Audio Select  
Page 34  
Stereo  
SAP  
Set the analog TV audio type for output and  
recording.  
HDMI  
Page 91  
Format  
Set the color space for the HDMI output.  
RGB  
YCbCr  
HDMI Audio  
RGB Range  
Set whether to output the HDMI audio signal  
or not.  
ON  
OFF  
Set the black-white contrast level for HDMI  
RGB output.  
Normal  
Enhanced  
Reset All  
Page 92  
Yes  
No  
Set to the default setting.  
Note  
• Your change to each setting stays on even when the power is off except for Dubbing Mode.  
• An item which is not currently available is grayed in the settings.  
EN 83  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETUPS  
Playback  
Press [STOP C] if you are playing back a disc.  
STANDBY-ON  
Press [SETUP] and use [K / L] to  
select “General Setting”, then press  
SOURCE  
.@/:  
DTV/TV  
DISPLAY OPEN/CLOSE  
A
1
2
[OK].  
ABC  
DEF  
“General Setting” menu will appear.  
1
GHI  
4
2
JKL  
5
3
MNO  
6
Use [K / L] to select “Playback”, then  
press [OK].  
PQRS  
TUV  
WXYZ  
7
8
9
CLEAR  
General Setting  
SPACE  
.
Playback  
Display  
Video  
Recording  
Clock  
Channel  
HDMI  
Reset All  
0
DISC MENU  
SETUP  
o
s
B
OK  
p
TITLE  
RETURN  
j
F
i
B
Use [K / L] to select a desired item,  
h
g
C
then press [OK].  
CHANNEL  
3
--  
+
Parental Lock  
Disc Audio  
Disc Menu Language  
Audio Language  
Subtitle Language  
Angle Icon  
1
2
3
4
5
6
7
REC MODE VCR  
DVD  
TIMER  
AUDIO  
REC  
HDMI  
I
Still Mode  
CM SKIP D.DUBBING TIMER SET RAPID PLAY  
SEARCH  
Submenu will appear.  
Refer to  
set the selected item.  
to  
on pages 85-86 and  
1
7
4
5
When you finish with setting, press  
[SETUP] to exit.  
84 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETUPS  
Playback (cont’d)  
Parental Lock (Default: OFF)  
1
Note  
• Press [CLEAR] to erase numbers entered incorrectly.  
Some DVD-video feature a parental lock level. Playback  
will stop if the ratings exceed the levels you set, it will  
require you to enter a password before the disc will  
playback. This feature prevents your children from  
viewing inappropriate material.  
• When you forget the password or you want to clear  
all settings in “Parental Lock” menu, enter 4,7,3,7  
using [the Number buttons] in password input  
window. Password will be cleared and parental levels  
will be set to “OFF”.  
Use [K / L] to select the desired level, then press [OK].  
Parental Lock  
Disc Audio  
2
OFF  
8 [Adult]  
7 [NC 17]  
6 [R]  
5 [PG R]  
4 [PG 13]  
3 [PG]  
Choose the appropriate audio setting for your external  
device.  
It will only affect a disc playback.  
Use [  
K
/
L] to select a desired item, then press [OK].  
2 [G]  
1 [Kid Safe]  
Disc Audio  
A
If a password has not been set yet, proceed to  
If a password has been set already, proceed to  
.
.
A
B
Dynamic Range Control  
PCM  
Dolby Digital  
B
C
Note  
Dynamic Range Control (Default : ON)  
A
• Parental lock function may not be available to some  
discs.  
Set to “ON” to compress the range between soft and loud  
sounds.  
Use [K / L] to select a setting, then press [OK].  
• With some DVD, it may be difficult to find if they are  
compatible with parental lock. Be sure to check if the  
parental lock function operates in the way that you  
have set.  
Dynamic Range Control  
• Record the password in case you forget it.  
ON  
OFF  
• If there is a DVD in the unit when you set up the  
parental lock, press [OPEN/CLOSE A] to activate the  
parental lock level.  
Your setting will be activated.  
Note  
A password has not been set yet.  
A
• Dynamic range control function is available only on  
the discs which are recorded in the Dolby Digital  
format.  
Use [K / L] to select “Yes”. Use [the Number buttons] to  
enter a new password except for 4737, then press [OK].  
Change Password?  
Password Input  
PCM (Default : 48kHz)  
B
Yes  
No  
Yes  
Use [K / L] to select a setting, then press [OK].  
Your setting will be activated.  
A password has been set already.  
PCM  
48kHz  
96kHz  
B
• Use [the Number buttons] to enter the current  
password.  
Your setting will be activated.  
48kHz : If your amplifier/decoder is NOT compatible  
with 96kHz PCM, select “48kHz”. 96kHz sound  
will be output in 48kHz.  
Password Input  
96kHz : If your amplifier/decoder is compatible with  
96kHz PCM, select “96kHz”. 96kHz sound will  
be output.  
Your setting will be activated.  
• If you want to change password, use [K / L] to select  
“Yes”. Use [the Number buttons] to enter a new  
password, then press [OK].  
Note  
When playing back disc with copyright protection  
<change the password>  
• Even if you select “96kHz”, the sound will be down  
sampled at 48kHz.  
Change Password?  
Password Input  
Yes  
No  
Yes  
Your setting will be activated.  
EN 85  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETUPS  
Playback (cont’d)  
Dolby Digital (Default : Stream)  
C
If “Other” is selected for  
using [the Number buttons].  
to  
, press 4-digit code  
3
5
Use [K / L] to select a setting, then press [OK].  
Dolby Digital  
Code Input  
PCM  
-
-
-
-
Stream  
• When you finish entering the code, press [OK]. Refer  
to the language code table on page 100.  
Your setting will be activated.  
PCM  
: Converts the Dolby Digital into PCM (2 channel).  
When your amplifier/decoder is NOT  
compatible with Dolby Digital, set to “PCM”.  
Note  
Stream : Outputs Dolby Digital signals  
• Only the languages supported by the disc can be  
selected.  
When your amplifier/decoder is compatible  
with Dolby Digital, set to “Stream”.  
• Audio language setting may not be available to  
some discs.  
• You can change or switch off the subtitles on a DVD  
also from the disc menu if it is available.  
• Press [CLEAR] or [s] to erase numbers entered  
incorrectly.  
Disc Menu Language (Default : English)  
3
Set the language for disc menu.  
Use [K / L] to select a setting, then press [OK].  
Disc Menu Language  
English  
French  
Spanish  
Other  
Angle Icon (Default : ON)  
6
Set to “ON” to show the angle icon during the playback.  
Use [K / L] to select a setting, then press [OK].  
Your setting will be activated.  
Angle Icon  
Audio Language (Default : Original)  
4
ON  
OFF  
Set the audio language.  
Use [K / L] to select a setting, then press [OK].  
Your setting will be activated.  
Audio Language  
Still Mode (Default : Auto)  
7
Original  
English  
French  
Spanish  
Other  
Select “Auto” usually.  
Use [K / L] to select a setting, then press [OK].  
Still Mode  
Your setting will be activated.  
• When “Original” is selected, the audio language will be  
in the disc’s default language.  
Auto  
Field  
Frame  
Subtitle Language (Default : OFF)  
Your setting will be activated.  
5
Auto  
: Optimum resolution setting (“Field” or  
“Frame”) will be selected.  
: Images in the still mode will be stabilized.  
Set the subtitle language.  
Use [K / L] to select a setting, then press [OK].  
Field  
Frame : Images in the still mode will be highly defined.  
Subtitle Language  
OFF  
Note  
English  
French  
Spanish  
Other  
•
Frame is 1 completed video image made up of 2  
fields (There are 30 frames per second of NTSC video).  
Your setting will be activated.  
86 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETUPS  
Display  
Press [STOP C] if you are playing back a disc.  
STANDBY-ON  
Press [SETUP] and use [K / L] to  
select “General Setting”, then press  
[OK].  
SOURCE  
.@/:  
DTV/TV  
DISPLAY OPEN/CLOSE  
A
1
2
3
ABC  
DEF  
1
GHI  
4
2
JKL  
5
3
MNO  
6
Use [K / L] to select “Display”, then  
press [OK].  
PQRS  
TUV  
WXYZ  
7
8
9
CLEAR  
SPACE  
Use [K / L] to select a desired item,  
then press [OK].  
.
0
DISC MENU  
SETUP  
o
OSD Language  
Screen Saver  
FL Dimmer  
DTV CC  
CC Style  
V-Chip  
1
2
3
4
5
6
s
B
OK  
p
TITLE  
RETURN  
j
F
i
B
Selection menu will appear.  
h
g
C
Refer to  
to  
on pages 85-86 and  
1
6
CHANNEL  
set the selected item.  
--  
+
• For  
and  
refer to pages 35-37.  
4
5
4
5
REC MODE VCR  
DVD  
TIMER  
AUDIO  
REC  
HDMI  
When you finish with setting, press  
[SETUP] to exit.  
I
CM SKIP D.DUBBING TIMER SET RAPID PLAY  
SEARCH  
OSD Language (Default : English)  
1
Set the language for the on-screen display.  
Use [K / L] to select a setting, then press [OK].  
OSD Language  
English  
Français  
Español  
Your setting will be activated.  
Screen Saver (Default : 10 minutes)  
2
Set the time to activate the screen saver function on the  
TV screen.  
Use [K / L] to select a setting, then press [OK].  
Screen Saver  
OFF  
5 minutes  
10 minutes  
15 minutes  
30 minutes  
Your setting will be activated.  
EN 87  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETUPS  
Display (cont’d)  
FL Dimmer (Default: Bright)  
MPAA Rating  
3
A
B
C
D
Set the front panel display brightness.  
Use [K / L] to select a setting, then press [OK].  
TV Rating  
Canadian French Rating  
Canadian English Rating  
FL Dimmer  
Auto  
Bright  
Dark  
You can set the viewing limitation according to MPAA  
rating (US movie ratings), TV Rating (US TV program  
ratings), Canadian French Rating (Canadian French  
language Ratings), Canadian English Rating (Canadian  
English language Ratings).  
You can choose one from “Auto”, “Bright” and “Dark”.  
If “Auto” is selected, the display gets dark when the  
power is off.  
1) Use [K / L] to select the desired rating, then press  
[OK] repeatedly to switch between view and block.  
When it is blocked a key icon will appear.  
V-Chip  
6
With the v-chip system in this unit, you can set the  
viewing limitation for the analog/digital TV programs  
received from the tuner or recorded on DVDs to prevent  
your children from watching inappropriate programs. If  
the unit detects a blocked program, a restriction message  
appears and you are not allowed to view or record the  
program.  
1) Use [the Number buttons] to enter the access  
password.  
If you have not set the password, first, use [the Number  
buttons] to set the access password, then press [OK].  
The number you entered will be stored as the access  
password.  
e.g.) MPAA rating  
MPAA Rating  
X
NC-17  
R
PG-13  
PG  
G
NR  
[MPAA Rating]  
Rating  
Category  
Mature audience only  
X
higher  
Password Input  
NC-17  
No one under 17 admitted  
Restricted; under 17 requires  
accompanying parent or adult guardian  
R
2) Use [K / L] to select a desired item, then press [OK].  
PG-13  
PG  
Unsuitable for children under 13  
Parental guidance suggested  
General audience  
V-Chip  
A
B
C
D
E
MPAA Rating  
TV Rating  
Canadian French Rating  
Canadian English Rating  
Downloadable Rating  
Change Password  
G
lower  
NR  
No rating  
[TV Rating]  
F
Rating  
TV-MA  
TV-14  
TV-PG  
TV-G  
Category  
Mature audience only  
higher  
Unsuitable for children under 14  
Parental guidance suggested  
General audience  
TV-Y7  
TV-Y  
Appropriate for all children 7 and older  
Appropriate for all children  
No rating  
lower  
NR  
[Canadian French Rating]  
Rating  
Category  
18 ans+  
16 ans+  
13 ans+  
8 ans+  
G
Adult audience only  
higher  
lower  
Unsuitable for ages under 16  
Unsuitable for ages under 13  
Unsuitable for ages under 8  
General audience  
E
Exempt program  
88 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETUPS  
Display (cont’d)  
[Canadian English Rating]  
Rating  
Downloadable Rating  
E
Category  
Set the rating system via digital broadcasting, or clear the  
downloaded ratings.  
If the broadcasting signal does not have the  
downloadable rating information, the message below  
will appear.  
18+  
14+  
PG  
G
Adult audience only  
higher  
lower  
Unsuitable for ages under 14  
Parental guidance suggested  
General audience  
C8+  
C
For children over 8  
Downloadable Rating is currently not available.  
For all children  
• This message will also appear when you try to access  
“DOWNLOADABLE RATING“ after you have cleared the  
downloadable rating information, and the new information has  
not been downloaded since.  
E
Exempt program  
As for TV Rating’s TV-MA, TV-14, TV-PG, or TV-Y7, you  
can further set the sub ratings to block specific  
elements of programming. Press [K / L/ { / B] to select  
the desired rating or sub rating, then press [OK]  
repeatedly to switch between view and block. Sub  
rating status will appear on the side of the main rating.  
To set the rating:  
Use [K / L] to select “BLOCK SETTING” then press [OK]  
to show the various types of ratings. Use [K / L] to  
select a desired rating to set, then press [OK] to show  
the levels for the rating. Use [K / L] to select a level,  
then press [OK] to switch “VIEW” or “BLOCK”. If you set  
one level to “BLOCK”, all the higher levels will be turned  
to “BLOCK” automatically.  
To clear the downloadable rating information and its  
setting:  
Use [K / L] to select “CLEAR DOWNLOADABLE  
RATING”, then press [OK].  
TV Rating  
FV  
V
S
L
D
TV-MA  
TV-14  
TV-PG  
TV-G  
TV-Y7  
TV-Y  
Change Password  
F
NR  
Change the current password.  
Use [the Number Buttons] to enter new access  
password.  
Sub Rating  
Category  
Fantasy Violence  
Rating  
TV-Y7  
FV  
V
Violence  
TV-PG  
TV-14  
TV-MA  
Note  
S
Sexual Situation  
Coarse Language  
Suggestive Dialogue  
• When you forget the access password at step 1),  
enter 4,7,3,7 using [the Number buttons] in the  
password input window. Password will be cleared.  
L
D
TV-PG, TV-14  
• Depending on the type of rating system, you may set  
the levels individually.  
Note  
• Changing the main rating to block or view  
automatically changes all its sub ratings to the same  
(block or view).  
EN 89  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETUPS  
Video  
Progressive Scan (Default : OFF)  
1
STANDBY-ON  
This unit is compatible with the progressive scan system.  
The feature provides you with the higher definition  
images than the traditional output system does. To utilize  
this feature, you must set progressive scan mode to “ON”.  
SOURCE  
.@/:  
DTV/TV  
DISPLAY OPEN/CLOSE  
A
ABC  
DEF  
1
GHI  
4
2
JKL  
5
3
MNO  
6
1) Use [K / L] to select “ON“, then press [OK].  
Progressive Scan  
PQRS  
TUV  
WXYZ  
ON  
7
8
9
OFF  
SPACE  
CLEAR  
.
0
2) Use [{ / B] to select “Yes“, then press [OK].  
DISC MENU  
SETUP  
o
Activating progressive scan:  
Check your TV has progressive scan  
and connect with component video cable.  
s
B
OK  
p
TITLE  
RETURN  
NOTE :  
If there is no picture or picture is  
distorted after selecting “Yes”,  
Wait about 15 seconds for auto recovery.  
j
F
i
B
h
g
C
Activate?  
Yes  
No  
CHANNEL  
--  
+
3) Use [K / L] to select “Yes“ within 15 seconds, then  
press [OK].  
Your setting will be activated.  
REC MODE VCR  
DVD  
TIMER  
Note  
• If your TV is compatible with progressive scan (525p /  
480p), you are recommended to use the component  
video cable (commercially available) to connect this  
unit to the TV. (Refer to “Method 2” on page 18 or  
page 19.) If not, use the RCA video cable and set the  
progressive scan to “OFF” or press and hold [SETUP]  
for more than 3 seconds during DVD playback.  
• When selecting “No” or not pressing any buttons on  
the unit or remote control within 15 seconds at step 3,  
progressive scan remains to be “OFF” (interlace scan).  
Press [STOP C] if you are playing back a disc.  
Press [SETUP] and use [K / L] to  
select “General Setting”, then press  
[OK].  
1
2
3
Use [K / L] to select “Video”, then  
press [OK].  
TV Aspect (Default: 4:3 Letter Box)  
2
Use [K / L] to select a desired item,  
then press [OK].  
You can select the TV aspect ratio to match the formats of  
what you are playing back with the unit and your TV  
screen (4:3 standard or 16:9 widescreen TV).  
1
2
3
Progressive Scan  
TV Aspect  
Video Input  
Use [K / L] to select a setting, then press [OK].  
TV Aspect  
Submenu will appear.  
4:3 Letter Box  
4:3 Pan & Scan  
16:9 Wide  
Refer to  
the selected item.  
to  
on this page and set  
1
2
If you have a standard TV:  
4
5
Select “4:3 Letter Box”, so that black bars appear on the  
top and bottom of the TV screen when playing back a  
wide-screen picture. Select “4:3 Pan & Scan” for a full  
height picture with both sides trimmed when playing  
back wide-screen picture.  
If you have a widescreen TV:  
Select “16:9 Wide”.  
• For  
refer to page 48.  
3
When you finish with setting, press  
[SETUP] to exit.  
90 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETUPS  
HDMI  
Use [K / L] to select a desired item,  
STANDBY-ON  
then press [OK].  
SOURCE  
.@/:  
DTV/TV  
DISPLAY OPEN/CLOSE  
3
4
Format  
HDMI Audio  
RGB Range  
1
2
3
A
ABC  
DEF  
1
GHI  
4
2
JKL  
5
3
MNO  
6
When you finish with the setting,  
press [SETUP] to exit.  
PQRS  
TUV  
WXYZ  
7
8
9
CLEAR  
SPACE  
.
0
DISC MENU  
SETUP  
Format (Default : RGB)  
1
o
You can select the color space for HDMI output.  
Set the appropriate color space for your display device.  
Use [K / L] to select a setting, then press [OK].  
• When the connected device is not compatible with the  
Y/Cb/Cr, HDMI signal is output as RGB regardless of the  
setting.  
s
B
OK  
p
TITLE  
RETURN  
j
F
i
B
h
g
C
Format  
CHANNEL  
RGB  
--  
+
YCbCr  
REC MODE VCR  
DVD  
TIMER  
AUDIO  
Your setting will be activated.  
REC  
HDMI  
HDMI Audio (Default : ON)  
I
2
CM SKIP D.DUBBING TIMER SET RAPID PLAY  
SEARCH  
If you do not want to output the audio through HDMI  
(when you digitally output the audio through the  
COAXIAL DIGITAL AUDIO OUT jack to your audio system,  
etc.), you can set the HDMI audio output off.  
Use [K / L] to select a setting, then press [OK].  
• Set to “OFF” when the HDMI sound is not output.  
HDMI Audio  
ON  
OFF  
Your setting will be activated.  
Press [SETUP] in stop mode and use  
[K / L] to select “General Setting”,  
then press [OK].  
RGB Range (Default : Normal)  
3
You can adjust the RGB range to make the dark areas of  
the HDMI images brighter.  
Use [K / L] to select a setting, then press [OK].  
• Select “Enhanced“ if the black-white contrast is not clear.  
• This setting is effective only for HDMI RGB output.  
1
2
Use [K / L] to select “HDMI”, then  
press [OK].  
RGB Range  
General Setting  
Playback  
Display  
Video  
Recording  
Clock  
Channel  
HDMI  
Reset All  
Normal  
Enhanced  
Your setting will be activated.  
• You cannot select HDMI when an HDMI cable is  
not connected and the items are shown in grey  
color.  
EN 91  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETUPS  
Reset All  
Reset the setting to default.  
Press [SETUP] and use [K / L] to  
select “General Setting”, then press  
1
[OK].  
STANDBY-ON  
“General Setting” menu will appear.  
SOURCE  
.@/:  
DTV/TV  
DISPLAY OPEN/CLOSE  
A
Use [K / L] to select “Reset All”, then  
press [OK].  
ABC  
DEF  
1
GHI  
4
2
JKL  
5
3
MNO  
6
2
Select “Yes” using [K / L] , then press  
[OK].  
PQRS  
TUV  
WXYZ  
7
8
SPACE  
9
CLEAR  
3
.
Reset to factory default?  
0
DISC MENU  
SETUP  
Yes  
No  
o
s
B
OK  
p
TITLE  
RETURN  
Select “Yes” again using [K / L] ,  
then press [OK].  
4
j
F
i
B
Are you sure?  
h
g
C
Yes  
No  
CHANNEL  
--  
+
Your setting in recording will be initialized.  
REC MODE VCR  
DVD  
TIMER  
AUDIO  
REC  
HDMI  
I
CM SKIP D.DUBBING TIMER SET RAPID PLAY  
SEARCH  
Note  
• The settings listed below will remain unchanged  
even after resetting to the factory default.  
– OSD language setting  
– Channel setting  
– Clock setting  
– Parental lock setting  
– V-Chip setting  
– Timer programming information  
92 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VCR FUNCTIONS  
Playback  
Recording  
Press [VCR] first.  
Press [VCR] first.  
1)Insert a prerecorded tape (refer to page 25 on how  
to insert a cassette tape).  
1)Insert a recordable tape with an erase-protection  
tab intact.  
Accidental erasure prevention  
2)Press [PLAY B] to start playback.  
3)Press [STOP C] to stop playback.  
To prevent accidental recording on a  
recorded cassette tape, remove its erase-  
protection tab. To record on it later, cover  
erase-protection tab  
the hole with cellophane tape.  
To pause playback:  
2)Select the recording mode using [REC MODE].  
Press [PAUSE F].  
• The desired recording mode is selected in SP  
(standard play) or SLP (super long play) mode by  
pressing [REC MODE].  
Playback will pause and sound will be muted.  
To resume playback:  
Press [PLAY B].  
Recording mode:  
Tape speed  
Type of tape  
SP mode  
Recording / playback time  
Note  
• When a cassette tape without erase-protection tab is  
inserted, the unit will start playback automatically.  
T60  
T120  
T160  
1hour  
2hours  
6hours  
2-2/3hours  
8hours  
• Tracking will be automatically adjusted upon  
playback. To adjust the tracking manually, press  
[CHANNEL  
SLP mode  
3hours  
/
] on the remote control.  
3)Select stereo or SAP. Refer to page 34.  
• S-VHS cassette tape is not available on this unit.  
4)Select the desired channel to record using  
[CHANNEL ] or [the Number buttons].  
/
5)Press [REC I] to start recording.  
Press [STOP C] to stop the recording.  
To pause recording:  
Press [PAUSE F].  
To resume recording:  
Press [PAUSE F] or [REC I].  
After the unit has been in pause mode for 5 minutes, it  
will stop automatically to protect the tape and the  
video head from damage.  
• Refer to pages 42-45 for instructions on timer recording.  
EN 93  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VCR FUNCTIONS  
One-touch Timer Recording (OTR)  
Index Search  
This feature allows you to set the recording length simply  
by pressing [REC I] on the remote control.  
An index mark will be assigned at the beginning of each  
recording you make. You may skip to a specific marked  
point by following the steps below.  
Press [VCR] first.  
Press [VCR] first.  
1)Insert a recordable tape with an erase-protection  
tab intact.  
1)Press [SEARCH] so that “INDEX SEARCH” menu  
appears.  
2)Using [the Number buttons], enter the number of  
recordings you wish to skip within 30 seconds.  
2)Select the recording mode using [REC MODE].  
(Refer to “Recording” on page 93.)  
INDEX SEARCH  
03  
3)Select stereo or SAP. Refer to page 34.  
4)Select the desired channel to record using  
[CHANNEL  
/
] or [the Number buttons].  
5)Press [REC I] to begin the one-touch timer  
recording.  
3)Press [E], [D] to start index search.  
If you want to go in the forward direction, press [D].  
If you want to go in the reverse direction, press [E].  
You can select a fixed recording time by pressing  
[REC I] repeatedly.  
After index search, the VCR will play back the cassette  
tape automatically.  
(0:30)  
(1:00)  
(Normal recording)  
(8:00)  
(7:30)  
CURRENT PROGRAM  
Beginning  
End  
When the one-touch timer recording is finished, the  
unit will turn off automatically.  
of tape  
of tape  
Pro.1 Pro.2 Pro.3 Pro.4 Pro.5  
02 01 01 02 03  
To change the recording length during the one-  
touch timer recording:  
INDEX MARK  
Press [REC I] repeatedly until the desired length  
appear.  
Note  
• You can make the index mark up to 20.  
To cancel the one-touch timer recording within the  
specified time:  
Press [STOP C].  
Note  
• The remaining recording time will be displayed on  
the front panel display during one-touch timer  
recording. Press [DISPLAY] to see it on the TV screen.  
• You cannot pause the one-touch timer recording.  
• If VCR one-touch timer recording is completed  
during DVD playback or recording, the VCR will be in  
stop mode and the DVD keeps the current mode.  
• Unlike a timer recording, you can perform the  
following operations during the one-touch timer  
recording.  
- Turning off the power to stop one-touch timer  
recording.  
- Using [REC I] or [STOP C] on the remote control.  
• When the one-touch timer recording is finished and  
the power is turned off, the unit will switch to the  
timer standby mode automatically if a timer  
recording has been programmed. Press [TIMER SET]  
to cancel the timer standby mode for using the unit  
continuously.  
94 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VCR FUNCTIONS  
Time Search  
Other Operations  
This feature allows you to go to a specific point on a  
cassette tape by entering the exact amount of time you  
wish to skip in order to reach the point.  
Press [VCR] first.  
Fast forward:  
When the unit is in stop mode, press [D] to fast forward  
the cassette tape.  
Press [VCR] first.  
1)Press [SEARCH] repeatedly so that “TIME SEARCH”  
menu appears.  
Rewind:  
When the unit is in stop mode, press [E] to rewind the  
cassette tape.  
To cue or review picture during playback (picture search):  
Press [E], [D] during playback.  
Press it again and the unit will search in super high  
speed. (in the SLP mode only)  
To freeze the picture on TV screen during playback  
(still mode):  
2)Using [the Number buttons], enter your desired  
time to skip within 30 seconds.  
You can set the time up to 9:59.  
TIME SEARCH  
2:50  
Press [PAUSE F]. Each time you press the button, the  
picture will be forwarded by one frame.  
If the picture begins to vibrate vertically during the still  
mode, stabilize the picture by pressing [CHANNEL  
/
]
3)Press [E], [D] to start time search.  
If you want to go in the forward direction, press  
[D].  
If you want to go in the reverse direction, press  
[E].  
After time search, the unit will play back the cassette  
tape automatically.  
on remote control.  
If the picture is distorted or rolling vertically, adjust the  
vertical hold control on your TV, if equipped.  
Counter reset:  
Press [CLEAR] to reset the counter to “0:00:00”.  
To playback in slow motion:  
Press [PAUSE F] during playback, then press [D].  
Press [D] or [E] repeatedly to select the desired  
Note  
speed.  
• Index search and time search are not available  
during recording.  
Automatic rewind:  
When a cassette tape is played back or fast forwarded to its  
end, the cassette tape will rewind to the beginning, stop  
and eject itself.  
When you playback a cassette tape recorded in Hi-Fi  
stereo:  
• Press [STOP C] to stop the search.  
• If the end of the cassette tape is reached during  
search, this unit will cancel the search and rewind the  
cassette tape.  
Press [AUDIO] on the remote control to select Hi-Fi or  
MONO for playback sound mode.  
• If you have connected a stereo TV to this unit, select “HIFI”.  
• If you have connected a monaural TV to this unit, select  
“MONO”.  
Your Selection  
HIFI  
MONO  
Monaural  
L+R  
L-channel  
R-channel  
Type of recorded tape  
non Hi-Fi tapes  
Monaural  
Monaural  
Hi-Fi tapes  
recorded in  
Hi-Fi stereo  
L
R
Hi-Fi tapes  
recorded main  
audio program  
Main audio  
program  
Main audio  
program  
Main audio  
program  
Hi-Fi tapes  
recorded second  
audio program  
Second audio Second audio Second audio  
program program program  
Note  
• Still/slow mode will stop after 5 minutes to prevent  
damage to the cassette tape and the video head.  
• To return to playback from the picture search/still/  
slow mode, press [PLAY B].  
EN 95  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUBLESHOOTING  
Before requesting service for this unit, check the table below for a possible cause of the problem you are experiencing.  
Some simple checks or a minor adjustment on your part may eliminate the problem and restore proper operation.  
Symptom  
Remedy  
The power does not turn on.  
• Check that the AC power cord is connected securely.  
• Check the breaker (in case of power failure).  
• Press [TIMER SET] to cancel the timer standby mode.  
There is no picture.  
• Re-connect the connecting cords securely.  
• Check if the connecting cords are damaged.  
• Check the connection to your TV (pages 18-19).  
• Switch the input selector on your TV (such as to “L1”) so that the signal  
from the unit appears on the TV screen.  
TV program reception does not fill the • Try to set the channels with “Auto Channel Preset” or “Manual Channel  
TV screen.  
Preset” in “Channel” menu (pages 27-29).  
• Select a channel of any TV program using [CHANNEL  
/
].  
TV program pictures are distorted.  
• Adjust TV antenna.  
• Adjust the picture. (Refer to the TV’s instruction manual.)  
• Place the unit and TV farther apart.  
• Place the TV and any bunched RF coaxial cables farther apart.  
TV channels cannot be changed.  
• Switch the input to TV.  
• Connect the RF coaxial cable correctly (pages 15-17).  
There is no sound or the sound is  
distorted.  
• Re-connect all connections securely.  
• Check if the connecting cord is damaged.  
• Check the connections to the amplifier input.  
• Check if the input device setting on the amplifier is correct.  
• When the unit is in pause mode or in slow-motion playback mode,  
sound is not output. This is not a malfunction.  
• When the unit is in fast forward or fast reverse mode, sound is not  
output. This is not a malfunction.  
• If using the HDMI connection, sound is not output when “HDMI Audio”  
is set to “OFF”.  
• Check the RCA audio cable connection. If you are using HDMI-DVI  
conversion cable, you must connect the RCA audio cable, too.  
• If using the HDMI connection, check whether the output format of this unit  
(HDMI FORMAT) matches the supported input format of other connected device.  
The remote control does not function. • Batteries are weak.  
• There are obstacles between the remote control and the unit.  
• The remote control is far from the unit.  
• There are no batteries in the remote control.  
• Check if the unit is turned on.  
•
Check if you are pointing the remote control at the recorder and NOT the TV.  
If you have a plasma TV, it may interfere with the IR signal. Try the  
remote with the plasma off. If the remote works, you may need to move  
the unit away from the plasma TV.  
• Press [DVD] or [VCR], whichever you need. Then, try again.  
• Press [TIMER SET] to cancel the timer standby mode.  
The unit does not operate properly.  
• When static electricity, etc., causes the unit to operate abnormally,  
unplug the unit and then plug it in again.  
No analog TV closed captions are  
output.  
• If you are using HDMI connection to watch the TV programs through this unit’s  
tuner, analog TV closed caption cannot be output. Try using other connection.  
Playback picture is distorted.  
• Keep the device which may cause electrical disturbances, such as a  
cellular phone, away.  
The channel cannot be changed from • Set the TV’s input to “TV.”  
the channel you are recording.  
Nothing was recorded even though  
you set the timer setting correctly.  
• There was a power failure during recording.  
• The unit’s internal clock stopped due to a power failure that lasted for  
more than 30 seconds. Reset the clock (pages 30-31).  
• The program contains copy protection signals that restricts copying.  
• The timer setting overlapped with another setting that has priority.  
Timer recording is not complete or did • The timer setting overlapped with another setting that has priority (page 45).  
not start from the beginning.  
Timer recording is impossible.  
• Disc space was not enough.  
• Make sure  
appears on the front panel display of this unit. If not, press  
[TIMER SET].  
96 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUBLESHOOTING  
Symptom  
Remedy  
There is no picture.  
• If the main menu appears on the TV screen, press [RETURN] to exit.  
• Check if the progressive scan mode is set correctly according to your TV  
(page 90).  
Picture noise appears.  
There is no sound.  
• Clean the disc with a cleaning cloth.  
• If you are using DIGITAL AUDIO OUT (COAXIAL) jack, check the setting in  
“Disc Audio” (pages 85-86).  
• Clean the disc with a cleaning cloth.  
Sound is noisy.  
• Clean the disc with a cleaning cloth.  
No DTS sound is output.  
The disc does not play back.  
• This unit is not compatible with DTS sound.  
• No disc is inserted.  
• A blank disc is inserted.  
• The disc is upside down. Insert the disc with the labeled side facing up.  
• The disc is not correctly inserted.  
• The unit cannot play back certain discs (such as a CD-ROM) (page 55).  
• The region code on the DVD-video does not match the unit (page 55).  
• Moisture has condensed inside the unit. Remove the disc and leave the  
unit turned on for about 2 hours until the moisture evaporates (page 4).  
• If the disc was recorded on another recorder, the unit cannot play back  
the disc if it was not finalized.  
Discs recorded on this unit cannot be • If you are using DVD-RW/-R, please ensure you finalized the disc after  
played back on other DVD players.  
recording (pages 53-54).  
The disc does not start playback from  
the beginning.  
• Resume playback was activated (page 61). Press [STOP C] twice.  
• You have inserted a disc whose title menu or DVD menu automatically  
appears on the TV screen when it is first inserted.  
The unit starts playing back the disc  
automatically.  
• The DVD-video features an auto playback function.  
Some functions such as stop, search,  
or slow-motion playback cannot be  
performed.  
• Depending on the disc, you may not be able to do some of the  
operations. Refer to the instruction manual supplied with the disc.  
The language for the sound track  
cannot be changed.  
• The title does not have the multilingual audio tracks.  
• The DVD-video prohibits the changing of the language for the sound  
track.  
The subtitle language cannot be  
changed or turned off.  
• Multilingual subtitle are not recorded on the DVD-video.  
The angles cannot be changed.  
• Multi-angles are not recorded on the DVD-video being played back.  
• The angle-change operation is whenever possible as long as the disc  
contains a multi-angle portion. Actual change will be performed when  
the portion has come up.  
• The DVD-video prohibits changing angles.  
• Try changing the angle using the DVD-video’s menu.  
Recording does not stop immediately  
after you press [STOP C].  
• It may take a few seconds for the unit to input disc data before  
recording stops.  
The disc tray does not open when you  
press [OPEN/CLOSE A].  
• It may take a few seconds for the disc tray to open after you have  
recorded or edited a disc. This is because the unit is adding disc data to  
the disc.  
“Repairing” appears on the TV screen. • If there is a power failure or unplugging during recording, finalizing,  
formatting or editing (even after “Repairing” disappears), a repairing  
process will begin automatically just after turning the unit on again.  
It may take several minutes up to about several hours.  
Repairing  
In a case you intend to cancel the  
repairing process.  
• If you intend to cancel the repairing process, press [OPEN/CLOSE A]  
on the front panel, then select “Yes” and press [OK]. After that, press  
[OPEN/CLOSE A] to take out the disc. The disc canceled during the  
repairing process MAY NOT work.  
Do you want to cancel a repairing  
process? When selecting “Yes”,  
the disc may not be usable.  
Yes  
No  
Repairing  
EN 97  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUBLESHOOTING  
Symptom  
Remedy  
There is no picture.  
• If you connect the cable to S-VIDEO OUT/ COMPONENT VIDEO OUT /  
HDMI OUT jack, connect it to AUDIO / VIDEO OUT jack instead.  
Picture noise appears.  
• Head cleaning for VCR may be necessary. Refer to “Auto head cleaning”  
(page 5).  
• Adjust tracking control for better picture by pressing [CHANNEL  
while you are playing back a cassette tape.  
/
]
The cassette tape does not play back. • No cassette tape is inserted.  
Recording does not start after you press • Make sure the cassette tape has an erase-protection tab when you  
[REC I].  
record to a cassette tape. If needed, cover the hole with cellophane  
tape.  
The remote control does not function. • Check if a cassette tape is in this unit.  
The motor rotates even when  
playback / recording is stopped.  
• The motor may rotate for the duration of approximately 5 minutes for  
efficient operation. This is not a malfunction.  
Frequently Asked Questions  
– Can I record to CD-RW/-R?  
No, this unit records only DVD.  
– Can I play back DVD-video that is bought in another  
country?  
Possible when the region code of the disc is 1 and All.  
No, you cannot control the unit by PC.  
– Can I connect the unit to my PC?  
– Can I program a timer recording with cable/satellite  
box?  
Yes, you can. Select “L1” or “L2” as your recording channel,  
and leave the cable / satellite box on (pages 17, 42-45).  
– Can I record one channel while watching another  
channel using a cable / satellite box?  
It depends on your connection configurations. For more  
details, please kindly contact your cable / satellite provider.  
– Can I connect this unit directly to a TV which only has  
an antenna in jack using an RF coaxial cable?  
No. You need an RF modulator (commercially available)  
to connect this unit to a TV which only has an antenna in  
jack (page 16). This unit does not have an RF modulator.  
– Can I change the channels on the cable / satellite box  
using the remote control of this unit?  
No. Changing the channels on the cable / satellite box using  
this unit’s remote control is not possible. You need to use  
the remote control supplied with the cable / satellite box to  
change the channels on the cable / satellite box.  
Note for Output Jacks on the Rear Panel  
1
HDMI OUT  
OUT  
DVD  
DVD/VCR  
DIGITAL  
AUDIO OUT  
AUDIO  
OUT  
S-VIDEO COMPONENT S-VIDEO IN ---AUDIO---OUT  
VIDEO OUT  
Y
L
L
IN  
ANTENNA  
PB  
/CB  
R
R
L
OUT  
IN  
COAXIAL  
IN ---VIDEO---OUT  
PR  
/CR  
R
2
3
4
5
6
Available for  
Output Jacks  
DVD mode  
VCR mode  
1 HDMI OUT  
✔
✔
✔
✔
✔
✔
✔
2 COAXIAL DIGITAL AUDIO OUT  
3 AUDIO OUT  
4 S-VIDEO OUT  
5 COMPONENT VIDEO OUT - interlace  
5 COMPONENT VIDEO OUT - progressive  
6 AUDIO/VIDEO OUT  
✔
✔
: Available  
: Not available  
98 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUBLESHOOTING  
Disc Error message  
Cause  
Solution  
Disc Error  
• Unplayable disc is inserted in the unit.  
• The disc is upside down.  
• Insert the standardized disc which bear  
the marks on page 55.  
• Insert the disc with the labeled side  
facing up.  
— Please eject the disc. —  
Playback feature may not be available on  
this Disc.  
Region Error  
— Please eject the disc. —  
Playback is not authorized in your region.  
• Playback is not authorized in the region  
of the DVD-video which you inserted in  
the unit.  
• Insert the DVD-video with region codes  
1 or ALL.  
Parental Lock On  
The current selected parental level  
prohibits playback.  
• The current selected parental level  
prohibits playback.  
• Check “Parental Lock” setting in  
“Playback” menu (page 85).  
Recording Error  
This program is not allowed to be  
recorded.  
• The recording function encountered  
the copy prohibited program.  
• You cannot record copy prohibited  
programs.  
Recording Error  
This program is not recordable in +VR  
mode.  
• You are trying to record the copy-once  
program.  
• You cannot record the copy-once  
program.  
Recording Error  
Can not record on this disc.  
• You are trying to record onto the disc  
which is unrecordable, or the disc status  
is unable to record.  
• Insert the recordable disc, and ensure  
the disc status satisfies the recording  
requirements (page 38).  
• Clean the disc with a cleaning cloth.  
• Replace the disc.  
• The disc is dirty.  
• The disc is damaged.  
Recording Error  
This disc is protected and not recordable.  
• You are trying to record on to the  
protected disc which is set in “Disc Edit”  
menu.  
• Release the disc protect setting in “Disc  
Edit” menu (page 52).  
Recording Error  
• You are trying to record onto the disc  
which has no space for recording.  
• Insert the recordable disc with enough  
recording space.  
Disc is full.  
(No area for new recording)  
Recording Error  
• You are trying to record onto the disc  
on which the number of recording titles  
comes up to the maximum (49).  
• Delete unnecessary titles (page 70).  
You cannot record more than 49 titles on  
one disc.  
(The maximum is 49)  
Recording Error  
• You are trying to record onto the  
DVD+RW or DVD-RW on which the  
number of recording chapters comes  
up to the maximum (254).  
• Delete unnecessary chapter marks  
(pages 73-74).  
You cannot record more than 254 chapters  
on one disc.  
(The maximum is 254)  
Recording Error  
You cannot record on this disc as Power  
Calibration Area is full.  
• When recordings are performed  
repeatedly onto an unstable disc, this  
area may come up to be full.  
• Insert a new disc.  
• Every time you insert a disc for  
recording, the disc’s working area will  
be taken up. And if you repeat this  
frequently, it will be used up sooner  
and you may not be able to record full  
49 titles.  
Recording Error  
This disc is already finalized.  
• You are trying to record onto the disc  
already finalized.  
• Release the finalizing for this disc  
(page 53).  
Recording Error  
• You are trying to record onto the  
disc that had been recorded by other  
recorders.  
• Set “Make Recording Compatible” to  
“ON” to rewrite the menu, after that you  
will record to disc (page 39).  
The disc has no recording compatibility.  
Set “Make Recording Compatible” to  
“ON” to convert the disc.  
* If you are still having trouble with the unit after checking “TROUBLESHOOTING”, write down the error code and the  
error description for calling our help line mentioned on the front page to locate an Authorized Service Center.  
EN 99  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LANGUAGE CODE  
Language  
Abkhazian  
Afar  
Afrikaans  
Albanian  
Amharic  
Arabic  
Armenian  
Assamese  
Aymara  
Azerbaijani  
Bashkir  
Code  
4748  
4747  
4752  
6563  
4759  
4764  
5471  
4765  
4771  
4772  
4847  
5167  
4860  
5072  
4854  
4855  
4864  
4853  
5971  
4851  
5759  
4947  
7254  
4961  
5464  
4965  
5047  
6058  
5160  
5161  
5166  
5261  
5256  
5255  
5264  
5271  
5358  
5747  
5051  
5158  
5758  
5360  
5367  
5447  
5569  
5455  
Language  
Hungarian  
Icelandic  
Indonesian  
Interlingua  
Interlingue  
Inupiak  
Code  
5467  
5565  
5560  
5547  
5551  
5557  
5347  
5566  
5647  
5669  
5760  
5765  
5757  
6469  
5771  
6460  
5761  
5767  
5861  
5847  
5868  
5860  
5866  
5957  
5953  
5965  
5958  
5966  
5955  
5964  
5961  
5960  
6047  
6051  
6061  
6149  
6164  
6159  
6247  
6265  
5247  
6258  
6266  
6367  
6459  
6461  
Language  
Russian  
Samoan  
Sangho  
Sanskrit  
Scots Gaelic  
Serbian  
Serbo-Croatian  
Sesotho  
Setswana  
Shona  
Code  
6467  
6559  
6553  
6547  
5350  
6564  
6554  
6566  
6660  
6560  
6550  
6555  
6565  
6557  
6558  
6561  
5165  
6567  
6569  
6568  
6658  
6653  
6647  
6666  
6651  
6654  
4861  
6655  
6661  
6665  
6664  
6657  
6669  
6757  
6764  
6772  
6855  
6861  
4971  
6961  
7054  
5655  
7161  
7267  
Irish  
Italian  
Japanese  
Javanese  
Kannada  
Kashmiri  
Kazakh  
Kinyarwanda  
Kirghiz  
Kirundi  
Korean  
Kurdish  
Laothian  
Latin  
Latvian; Lettish  
Lingala  
Lithuanian  
Macedonian  
Malagasy  
Malay  
Malayalam  
Maltese  
Maori  
Marathi  
Moldavian  
Mongolian  
Nauru  
Nepali  
Norwegian  
Occitan  
Oriya  
Oromo (Afan)  
Panjabi  
Pashto; Pushto  
Persian  
Polish  
Portuguese  
Quechua  
Rhaeto-Romance  
Romanian  
Sindhi  
Singhalese  
Siswat  
Slovak  
Slovenian  
Somali  
Spanish  
Sundanese  
Swahili  
Swedish  
Tagalog  
Tajik  
Basque  
Bengali;Bangla  
Bhutani  
Bihari  
Bislama  
Breton  
Bulgarian  
Burmese  
Byelorussian  
Cambodian  
Catalan  
Chinese  
Corsican  
Croatian  
Czech  
Danish  
Dutch  
English  
Esperanto  
Estonian  
Faroese  
Fiji  
Finnish  
French  
Tamil  
Tatar  
Telugu  
Thai  
Tibetan  
Tigrinya  
Tonga  
Tsonga  
Turkish  
Turkmen  
Twi  
Ukrainian  
Urdu  
Frisian  
Uzbek  
Galician  
Georgian  
German  
Greek  
Greenlandic  
Guarani  
Gujarati  
Hausa  
Vietnamese  
Volapuk  
Welsh  
Wolof  
Xhosa  
Yiddish  
Yoruba  
Zulu  
Hebrew  
Hindi  
100 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GLOSSARY  
Analog Audio  
PBC (playback control) (video CD only)  
An electrical signal that directly represents sound.  
Compare this to digital audio which can be an electrical  
signal, but is an indirect representation of sound. See also  
“Digital Audio”.  
This function enables you to play back interactive  
software using a menu screen. See also “Video CD”.  
PCM (pulse code modulation)  
The most common system of encoding digital audio,  
found on CD and DAT. Excellent quality, but requires a  
lot of data compared to formats such as Dolby Digital  
and MPEG audio. For compatibility with digital audio  
recorders (CD, MD and DAT) and AV amplifiers with  
digital inputs, this unit can convert Dolby Digital and  
MPEG audio to PCM. See also “Digital Audio”.  
Aspect Ratio  
The width of a TV screen relative to its height.  
Conventional TVs are 4:3 (in other words, the TV screen  
is almost square); widescreen models are 16:9 (the TV  
screen is almost twice as wide as it is high).  
Chapter (DVD only)  
Just as a book is split up into several chapters, a title on a  
DVD is usually divided into chapters. See also “Title”.  
Progressive Scan (525p/480p)  
A type of display that does not split each frame into  
fields, and instead scans directly through all the scanlines  
of each frame in order. Progressive scan provides less  
flickering and higher image resolution than traditional  
(525i/480i) TV signals. Refer to page 90 for instructions on  
selective progressive scan mode.  
Component Video Out  
Each signal of luminance (Y) and component (PB/CB, PR/  
CR) is independent to output so that you can experience  
picture color as it is.  
Also, due to compatibility with progressive video  
(525p/480p), you can experience higher-density picture  
than that in interlace (525i/480i).  
Region Code  
Regions associate discs and players with particular areas  
of the world. This unit will only play back discs that have  
compatible region codes. You can find the region code  
of your unit by looking on the rear panel. Some discs are  
compatible with more than one region (or all regions).  
Digital Audio  
An indirect representation of sound by numbers. During  
recording, the sound is measured at discrete intervals  
(44,100 times a second for CD audio) by an analog-  
to-digital converter, generating a stream of numbers.  
On playback, a digital-to-analog converter generates  
an analog signal based on these numbers. See also  
“Sampling Frequency” and “Analog Audio”.  
Sampling Frequency  
The rate which sound is measured by a specified interval  
to turn into digital audio data. The numbers of sampling  
in one second defines as sampling frequency. The higher  
the rate, the better the sound quality.  
Dolby Digital  
The system to compress digital sound developed by  
Dolby Laboratories. It offers you sound of stereo(2ch) or  
multi channel audio.  
SAP (secondary audio program)  
Sub-audio channel which is delivered separately from  
main-audio channel. This audio channel is used as an  
alternate in bilingual broadcasting.  
Finalize  
S-Video Output  
It delivers independently each signal of color(C) and  
luminance(Y) to TV as video signals, so that higher-quality  
picture will be gained.  
To make DVD, which have been recorded on, possible to  
play back in DVD players. With this unit, it is possible to  
finalize DVD+R, DVD-RW, and DVD-R.  
HDMI™ (high definition multimedia interface)  
A digital interface between audio and video source. It can  
transmit component video, audio, and control signal with A collection of chapters on DVD. See also “Chapter”.  
one cable connection.  
Title (DVD only)  
Track  
MP3 (MPEG audio layer 3)  
MP3 is a method of compressing files. You can copy MP3  
files on CD-RW/-R from the computer and play back the  
files on this unit.  
Audio CD use tracks to divide up the content of a  
disc. The DVD equivalent is called a chapter. See also  
“Chapter”.  
Video CD  
A digital format for store video data in compact disc.  
EN 101  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIFICATIONS  
General  
VCR video heads  
Power requirements  
Power consumption  
Four heads  
120V AC +/-10%, 60Hz +/-5%  
30W (standby: 3.3W)  
Dimensions (width x height x depth)  
Weight  
17.2 x 4.0 x 10.3 inches (435 x 99.5 x 260mm)  
9.5 lbs. ( 4.3kg )  
Operating temperature  
Operating humidity  
TV system  
41°F (5°C) to 104°F (40°C)  
Less than 80% (no condensation)  
ATSC / NTSC-M TV standard  
Recording  
Recording format  
+VR (video recording) format  
DVD+Rewritable, DVD+Recordable  
DVD-Rewritable, DVD-Recordable (+VR mode only)  
Recording discs  
Video recording format  
Sampling frequency  
Compression format  
13.5 MHz  
MPEG  
Audio recording format  
Sampling frequency  
Compression format  
48 kHz  
Dolby Digital  
Tuner  
Tuning system  
Channel frequency synthesized tuning system  
Channel coverage (ATSC / NTSC)  
Terrestrial  
CATV  
VHF 2~13, UHF 14~69  
2~13, A~W, W+1~W+94 (analog W+1~W+84), A-5~A1, 5A  
Terminals  
Audio input  
RCA jack x 2  
2V rms (input impedance: more than 22kΩ)  
1Vp-p (75Ω)  
Video input  
RCA jack x 1  
S-video input  
Mini DIN 4-pin x 1  
VHF/UHF/CATV input and output  
F-type  
Y: 1Vp-p (75Ω)  
C: 286mVp-p (75Ω)  
75Ω unbalanced  
Audio input  
RCA jack x 2  
2V rms (input impedance: more than 22kΩ)  
2V rms (output impedance: more than 1kΩ)  
1Vp-p (75Ω)  
Audio output  
RCA jack x 4  
Video input  
RCA jack x 1  
Video output  
RCA jack x 1  
1Vp-p (75Ω)  
S-video input  
Mini DIN 4-pin x 1  
S-video output  
Mini DIN 4-pin x 1  
Component video out  
RCA jack x 3  
Coaxial digital audio out  
RCA jack x 1  
HDMI output  
Jack  
Y: 1Vp-p (75Ω)  
Y: 1Vp-p (75Ω)  
Y: 1Vp-p (75Ω)  
500mVp-p (75Ω)  
HDMI jack  
C: 286mVp-p (75Ω)  
C: 286mVp-p (75Ω)  
PB/CB: 700mVp-p (75Ω)  
PR/CR: 700mVp-p (75Ω)  
Note  
• The specifications and design of this product are subject to change without notice.  
102 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ESPAÑOL  
Discos Reproducibles  
Disco Grabable  
Este aparato es compatible con la reproducción de los  
siguientes discos y archivos.  
Este aparato puede grabar a DVD+RW, DVD+R, DVD-RW y  
DVD-R.  
Los discos DVD+R/DVD-R pueden ser grabados sólo una  
vez. Los discos DVD+RW/DVD-RW pueden ser grabados y  
borrados muchas veces.  
En este aparato los discos DVD-RW/-R serán grabados  
automáticamente en el modo DVD+VR.  
Discos reproducibles  
DVD-video  
Logotipos  
Logotipo  
Atributos  
DVD+RW  
DVD+R  
Disco de 8 cm / 12 cm, un solo lado,  
una sola capa  
Tiempo de grabación máx. aprox.  
(modo SLP):  
DVD+RW  
DVD+R  
360 minutos (4,7 GB) (para 12 cm)  
108 minutos (1,4 GB) (para 8 cm)  
DVD-RW  
(Sólo discos en modo de video finalizados)  
DVD-RW  
DVD-R  
DVD-R  
(Sólo discos en modo de video finalizados)  
• Los siguientes discos se recomiendan para obtener una  
buena calidad de grabación y han sido comprobados  
como compatibles con este aparato. Sin embargo, según  
sea la condición del medio el equipo podría no leer el  
disco correctamente.  
CD-DA (CD de audio)  
CD de video  
Verbatim  
DVD+R 8x,  
DVD-R 8x,  
DVD-RW 4x  
DVD+RW 4x,  
DVD-RW 2x  
JVC  
Maxell  
SONY  
TDK  
DVD+R 4x/8x/16x, DVD-R 8x/16x  
DVD+R 4x/8x/16x, DVD+RW 4x  
DVD+R 4x/8x/16x  
El comportamiento de cualquier otro disco no está  
garantizado.  
CD-RW  
CD-R  
• Usted puede reproducir discos DVD+RW en la  
mayoría de los reproductores de DVD sin finalizarlos.  
Sin embargo, si usted ha añadido o eliminado  
capítulos, u ocultado capítulos, debe ejecutar  
“Compatibilizar edic.” antes de poder ver dichos  
efectos en otros equipos. (Consulte la página 80.)  
Para reproducir discos que no sean DVD+RW en  
otros reproductores de DVD, usted necesitará  
finalizarlos.  
Archivos reproducibles  
Medio  
CD-DA  
CD-RW/-R  
MP3  
Disco no Grabable  
es una marca registrada de  
DVD Format/Logo Licensing Corporation.  
• Un DVD-RW grabado en un modo distinto de +VR no  
será grabable en este aparato a menos que usted borre  
todo el contenido del disco. (Consulte la página 79.)  
• Un DVD-R grabado en un modo distinto de +VR no será  
grabable en este aparato.  
Códigos de Región  
El número presente en el interior  
el globo se refiere a una región  
del mundo.Este aparato puede  
reproducir discos DVD que estén  
rotulados para ALL las regiones o  
para la región 1.  
ES 103  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ESPAÑOL  
Conexión Básica  
1) Desconecte el cable de alimentación de su televisor del tomacorriente de CA.  
2) Efectúe la conexión básica ilustrada más abajo.  
parte trasera de este aparato  
HDMI OUT  
OUT  
DVD/VCR  
IN ---AUDIO---OUT  
V
DVD/VCR  
S-VIDEO IN ---AUDIO---OUT  
antena de  
VHF / UHF  
L
L
S-VIDEO  
IN  
ANTENNA  
R
R
OUT  
IN  
IN  
IN ---VIDEO---OUT  
L
cable coaxial  
de RF  
R
IN  
ANTENNA  
o
IN ---VIDEO---OUT  
empresa de  
TV por cable  
cable coaxial  
de RF  
parte trasera de su televisor  
Esta conexión es sólo para  
el procesamiento de cada  
elemento de la señal de TV  
cable de  
cable de  
video RCA  
audio RCA  
R
L
ANT. IN  
AUDIO IN VIDEO IN  
3) Enchufe los cables de alimentación de los aparatos al tomacorriente de CA.  
Conexión a Una Caja de TV por Cable / Satelital  
1) Desconecte el cable de alimentación de su televisor del tomacorriente de CA.  
2) Efectúe la conexión como se ilustra abajo.  
ej.)  
cable de S-video  
cable de video RCA  
o
cable de audio RCA  
parte trasera de este aparato  
HDMI OUT  
OUT  
DVD/VCR  
DVD/VCR  
OUT  
IN  
S-VIDEO IN ---AUDIO---OUT  
S-VIDEO  
IN --- AUDIO---OUT  
L
L
IN  
ANTENNA  
R
R
IN  
R
L
S-VIDEO  
OUT  
IN ---VIDEO---OUT  
AUDIO OUT VIDEO OUT  
L
caja de TV por  
cable/satelital  
ANTENNA  
R
IN  
cable  
coaxial  
de RF  
IN ---VIDEO---OUT  
Esta conexión es sólo  
para el procesamiento  
de cada elemento de  
la señal de TV  
cable  
coaxial  
de RF  
ANT. IN  
RF OUT ANT. IN  
antena  
parabólica  
satelital  
trasera de su televisor  
cable de  
audio RCA  
cable de  
video RCA  
cable coaxial  
de RF  
o
R
L
VIDEO IN  
AUDIO IN  
empresa de  
TV por cable  
3) Enchufe los cables de alimentación de los aparatos al tomacorriente de CA.  
104 ES  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ESPAÑOL  
Grabación Básica  
Configuración Inicial  
Cuando usted encienda este aparato por primera vez  
necesita seguir estos pasos.  
Presione [DVD].  
Presione [OPEN/CLOSE A]  
para abrir la bandeja de  
discos e insertar su disco  
con el rótulo aupntando  
hacia arriba. Presione de nuevo  
[OPEN/CLOSE A] para cerrar la  
bandeja de discos.  
1
Presione [STANDBY-ON y].  
Encienda el televisor. Seleccione la entrada a  
1
la cual está conectado el aparato.  
Utilice [K / L] para seleccionar su  
* Asegúrese de que el disco sea compatible con este  
aparato.(Para obtener la lista de discos compatibles  
consulte la página 38.)  
idioma deseado, y luego presione  
[OK] para establecerlo.  
2
Initial Setup  
Para seleccionar un modo de  
grabación presione [REC MODE].  
OSD Language  
English  
Français  
Español  
2
Calidad del video  
Modo de  
grabación  
Tiempo de  
grabación  
y el sonido  
Disco de 8 cm Disco de 12 cm  
HQ (1Hr)  
SP (2Hr)  
SPP (2.5Hr)  
LP (3Hr)  
EP (4Hr)  
SLP (6Hr) 108 min  
18 min  
36 min  
45 min  
54 min  
72 min  
60 min  
120 min  
150 min  
180 min  
240 min  
360 min  
Buena  
Deficiente  
Utilice [K / L] para seleccionar el tipo  
de señal de emisión, y luego presione  
[OK].  
Presione [DTV/TV] para seleccionar TV  
analógica o TV digital, y a  
continuación, utilice [CHANNEL  
o [los botones numéricos] y [ • ] (para  
canales de TV digital) para seleccionar  
un canal que desea grabar.  
3
Ajuste inicial  
/
]
3
4
Ajuste de Canal  
Verificar que la antena esté  
conectada a la toma "ANTENNA IN".  
Antena  
Cable (Analógico)  
Cable (Analógico/Digital)  
Presione [REC I] para iniciar la  
grabación.  
El equipo comenzará a obtener los canales  
disponibles en su región.  
Para configurar la grabación a un toque con  
temporizador (OTR)...  
Esta es una manera sencilla de configurar el tiempo de  
grabación en bloques de 30 minutos.  
Presione [REC I] repetidamente hasta que aparezca en la  
pantalla del televisor la longitud deseada de grabación (30  
minutos a 6 horas).  
Utilice [{ / B] para seleccionar un  
elemento a configurar, y utilice [K /  
para seleccionar el contenido de su  
preferencia, y luego presione [OK].  
L]  
4
Comenzará la grabación a un toque con temporizador.  
Ajuste inicial  
I
0h30m  
Ajste Manual de Reloj  
ENE / 01 / 2008 ( MAR )  
12 : 00 AM  
0h30m  
(grabación normal)  
1h00m  
6h00m  
5h30m  
Para cambiar la duración de la grabación durante la  
grabación a un toque con temporizador:  
Presione [REC  
I] repetidamente hasta que aparezca la  
duración deseada.  
Para cancelar la grabación a un toque con  
temporizador dentro del tiempo especificado:  
Presione [STOP C].  
Para de tener la grabación presione  
[STOP C].  
5
ES 105  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ESPAÑOL  
Grabación con Temporizador  
Usted puede programar el equipo para que grabe hasta 12  
programas, con un mes de anticipación. También hay  
disponibles grabaciones de programas diarias o semanales.  
Antes de grabar, asegúrese de que  
• Antes de establecer una programación del temporizador  
configure el reloj.  
Presione [TIMER].  
1
2
Utilice [K / L] para seleccionar “Prog.  
nuevo”, y luego presione [OK].  
Programaci. con Reloj  
• Inserte un disco grabable con suficiente espacio libre o  
una cinta de cassette con una lengüeta de grabación.  
MAR ENE/01 11:00AM  
Fcha  
Empieza Termina  
Prog. nuevo  
CH  
STANDBY-ON  
Configure una programación del  
temporizador.  
SOURCE  
.@/:  
DTV/TV  
DISPLAY OPEN/CLOSE  
A
3
4
5
ABC  
DEF  
1
GHI  
4
2
JKL  
5
3
MNO  
6
Presione [OK].  
PQRS  
TUV  
WXYZ  
7
8
SPACE  
9
CLEAR  
Presione [TIMER SET] para configurar  
una programación del temporizador.  
.
0
Aparecerá  
en el pantalla del panel frontal.  
DISC MENU  
2
o
Configure la fecha.  
s
B
o
p
Fcha  
ENE/02  
CH  
Empieza  
- - : - -  
GRAB a  
DVD  
Termina  
- - : - -  
Modo  
SP  
OK  
p
TITLE  
B
DTV125. 1  
4
SP  
2h00m  
Configure las horas de inicio y finalización.  
j
F
i
B
o
Fcha  
ENE/02  
CH  
Empieza  
12 : 00AM  
GRAB a  
DVD  
Termina  
- - : - -  
Modo  
SP  
h
g
C
s
B
B
DTV125. 1  
p
CHANNEL  
SP  
2h00m  
--  
+
Seleccione un modo deseado de entrada y el canal  
a grabar.  
Para obtener más detalles, consulte “How to select a  
channel number for the timer recording” en la página  
44 del manual del usuario.  
REC MODE VCR  
DVD  
TIMER  
AUDIO  
REC  
HDMI  
I
1
ej.) modo digital  
CM SKIP D.DUBBING TIMER SET RAPID PLAY  
o
Fcha  
ENE/02  
CH  
Empieza  
12 : 00AM  
GRAB a  
DVD  
Termina  
1 : 00AM  
Modo  
s
B
SEA5
B
DTV125. 1  
SP  
p
SP  
1h00m  
Seleccione un medio de grabación (“DVD” o “VCR”).  
Fcha  
ENE/02  
CH  
Empieza  
12 : 00AM  
GRAB a  
DVD  
Termina  
1 : 00AM  
Modo  
o
B
DTV125. 1  
SP  
p
SP  
1h00m  
Seleccione un modo de grabación.  
Fcha  
ENE/02  
CH  
Empieza  
12 : 00AM  
GRAB a  
DVD  
Termina  
1 : 00AM  
Modo  
o
DTV125. 1  
SP  
p
SP  
1h00m  
Reproducción  
Presione  
Abra la bandeja de  
Cerrar la bandeja  
Comience a  
reproducir.  
Detenga la  
1
[DVD].  
2
discos, y Inserte un  
3
de discos.  
OPEN/CLOSE  
A
4
5
reproducción.  
disco.  
OPEN/CLOSE  
A
DVD  
C
B
106 ES  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MEMO  
ES 107  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LIMITED WARRANTY  
FUNAI CORP. will repair this product, free of charge in the USA in the event of defect in materials or workmanship  
as follows:  
DURATION:  
PARTS: FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the date  
of original retail purchase. Certain parts are excluded from this warranty.  
LABOR: FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the date of  
original retail purchase.  
LIMITS AND EXCLUSIONS:  
THIS WARRANTY IS EXTENDED ONLY TO THE ORIGINAL RETAIL PURCHASER. A PURCHASE RECEIPT OR OTHER  
PROOF OF ORIGINAL RETAIL PURCHASE WILL BE REQUIRED TOGETHER WITH THE PRODUCT TO OBTAIN SERVICE  
UNDER THIS WARRANTY.  
This warranty shall not be extended to any other person or transferee.  
This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced, missing  
or if service was attempted by an unauthorized service center. This limited warranty does not apply to any  
product not purchased and used in the United States.  
This warranty only covers failures due to defects in material or workmanship which occur during normal use. It  
does not cover damage which occurs in shipment, or failures which are caused by repairs, alterations or products  
not supplied by FUNAI CORP., or damage, which results from accident, misuse, abuse, mishandling,  
misapplication, alteration, faulty installation, improper maintenance, commercial use such as hotel, rental or  
office use of this product, or damage which results from fire, flood, lightning or other acts of God.  
THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT REMOTE CONTROL), ANY  
COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS.  
FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY GENERAL, INDIRECT  
OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY THE USE OF OR THE INABILITY TO USE THIS  
PRODUCT. THIS WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL  
OTHER LIABILITIES ON THE PART OF FUNAI, ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF  
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS  
REPRESENTATIVES IN THE UNITED STATES.  
ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY AN AUTHORIZED SERVICE CENTER.  
THIS WARRANTY IS ONLY VALID WHEN THE UNIT IS CARRIED-IN TO AN AUTHORIZED SERVICE CENTER.  
THE PRODUCT MUST BE ACCOMPANIED BY A COPY OF THE ORIGINAL RETAIL PURCHASE RECEIPT. IF NO PROOF  
OF PURCHASE IS ATTACHED, THE WARRANTY WILL NOT BE HONORED AND REPAIR COSTS WILL BE CHARGED.  
IMPORTANT:  
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY HAVE OTHER RIGHTS THAT VARY FROM  
STATE TO STATE. IF, AT ANY TIME DURING THE WARRANTY PERIOD, YOU ARE UNABLE TO OBTAIN SATISFACTION  
WITH THE REPAIR OF THIS PRODUCT, PLEASE CONTACT FUNAI CORP.  
ATTENTION:  
FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT WITHOUT  
PRIOR NOTICE.  
WARRANTY STATEMENT REGARDING NON AUTHORIZED REPAIRS:  
To obtain warranty service, you must take the product, or deliver the product freight prepaid, in either its original  
packaging or packaging affording an equal degree of protection, to any AUTHORIZED SERVICE CENTER. FUNAI  
CORP. will not reimburse you for any service done by unauthorized service providers without prior written  
approval.  
To locate your nearest AUTHORIZED SERVICE CENTER or for general service inquiries, please  
contact us at:  
FUNAI SERVICE CORPORATION  
Customer Service  
Tel: 1-800-605-8610  
http://www.funai-corp.com  
5653 Creekside Parkway, Suite A, Lockbourne, OH 43137  
Printed in China  
E9M81UD  
1VMN25873 ★★★★★  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Echo Trimmer SUP22203220 User Manual
Ericsson Telephone LBI 39169 User Manual
ETA Systems Surge Protector ETA S20 User Manual
Extron electronic Car Amplifier MPA 152 User Manual
Extron electronic Network Card RGB 460xi Series User Manual
Fisher Price Motorized Toy Car K5874 User Manual
Frymaster Fryer FMCF User Manual
Fujitsu Network Card FTM7924FB User Manual
Generac Portable Generator 04077 1 04109 1 04079 1 00789 1 00844 1 User Manual
GE Network Router IS200ADIIH_A_ _ User Manual