Owner’s Manual
Please read before using this unit.
DVD/CD Player with Video Cassette Recorder
CDV210HH8
Supplied Accessories
Remote control
(NB183UD)
with two AA batteries
RF cable
(WPZ0901TM002)
Audio/Video cables
(WPZ0102TM018 /
WPZ0102LTE01)
Owner’s Manual (1VMN23713)
If you need additional operating assistance after
reading this owner’s manual, please call
Owner’s Manual
TOLL FREE : 1-800-414-1053
or visit our web site at
Table of Contents
■ Recording............................................................................................12
Recording & OTR (One Touch Recording)......................................................12
Timer Recording ......................................................................................................12
Hints for OTR and Timer Recording..................................................................13
Copying a Video Tape ...........................................................................................14
Precautions
Laser Safety.................................................................................................................2
■ Important Safeguards.........................................................................3
Location and Handling...........................................................................................4
Avoid the Hazards of Electrical Shock and Fire.............................................4
Moisture Condensation Warning.......................................................................4
About Copyright.......................................................................................................4
Symbols Used in This Manual..............................................................................4
Maintenance ..............................................................................................................4
■ About the Video Cassettes and Discs..................................................5
Playable Video Cassettes.......................................................................................5
Playable Discs ............................................................................................................5
Unplayable Discs ......................................................................................................5
DVD Functions
■ Playback .............................................................................................15
■ MP3 Playback .....................................................................................16
■ Search Functions ................................................................................16
Using Track Search..................................................................................................16
Using Title / Chapter Search................................................................................16
Using Time Search ..................................................................................................16
■ On-Screen Display ..............................................................................17
Setup
■ Repeat / Random / Programmed Playback .......................................18
Repeat Playback / Repeat A-B Playback .........................................................18
Random Playback / Programmed Playback ..................................................18
■ Special Settings ..................................................................................19
Subtitle Language / Audio Language..............................................................19
Camera Angles / Black Level Setting ...............................................................19
Stereo Sound Mode / Virtual Surround...........................................................19
■ DVD Setup...........................................................................................20
LANGUAGE Setting.................................................................................................20
DISPLAY Setting.......................................................................................................21
AUDIO Setting ..........................................................................................................21
PARENTAL Setting...................................................................................................22
OTHERS Setting........................................................................................................22
Reset to the Default Setting (Except for PARENTAL Setting)..................23
■ Connections.........................................................................................6
RF Output Channel..................................................................................................6
Hint for Cable Box or Satellite Box.....................................................................6
Connection to an Audio System.........................................................................6
Connection to a TV..................................................................................................7
■ Preparation for Use .............................................................................8
Turn on the Unit for the First Time....................................................................8
To Add or Delete Channels...................................................................................8
Clock Setup.................................................................................................................8
■ Function Overview ..............................................................................9
Front Panel Indicator ..............................................................................................9
VCR / DVD Switching ..............................................................................................9
Front & Rear Terminals...........................................................................................9
Remote Control........................................................................................................10
Installing the Batteries for the Remote Control...........................................10
Information
■ Troubleshooting Guide ......................................................................23
■ Specifications .....................................................................................24
■ Limited Warranty ...............................................................................24
■ Quick Use Guide .................................................................................25
VCR Functions
■ Playback .............................................................................................11
■ Other Operations ...............................................................................11
Index Search..............................................................................................................11
Time Search...............................................................................................................11
Auto Repeat...............................................................................................................12
Basic TV Connection
Antenna
or
Cable TV Antenna
Cable TV
signal
(Back of DVD/VCR)
signal
or
(Back of TV)
4
AC
(Back of TV)
Plug in
outlets
ANT-IN
2
ANT-OUT
Disconnect
3
Connect
Connect
From DVD/VCR
From TV
RF cable (supplied)
Please refer to “Connections”on page 6.
5
© 2007 Funai Electric Co., Ltd.
E8C1UCD_EN.indd
1
2007/04/03 9:48:48
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFEGUARDS
FIGURE A
1. Read Instructions - All the safety and operating instructions
should be read before the appliance is operated.
ANTENNA
LEAD
EXAMPLE OF ANTENNA GROUNDING
AS PER NATIONAL ELECTRICAL CODE
WIRE
2. Retain Instructions- The safety and operating instructions
should be retained for future reference.
GROUND
CLAMP
3. Heed Warnings - All warnings on the appliance and in the
operating instructions should be adhered to.
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
4. Follow Instructions - All operating and use instructions should
be followed.
ELECTRIC
SERVICE
EQUIPMENT
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
5. Cleaning - Unplug this video product from the wall outlet
before cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.
GROUND CLAMP
NEC – NATIONAL ELECTRICAL CODE
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
S2898A
EXCEPTION: A product that is meant for uninterrupted service
and, that for some specific reason, such as the possibility of
the loss of an authorization code for a CATV converter, is not
intended to be unplugged by the user for cleaning or any
other purpose, may exclude the reference to unplugging the
appliance in the cleaning description otherwise required in
item 5.
14. Lightning - For added protection for this video product
during a lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the wall
outlet and disconnect the antenna or cable system. This will
prevent damage to the video product due to lightning and
power-line surges.
15. Power Lines - An outside antenna system should not be
located in the vicinity of overhead power lines or other elec-
tric light or power circuits, or where it can fall into such power
lines or circuits. When installing an outside antenna system,
extreme care should be taken to keep from touching such
power lines or circuits as contact with them might be fatal.
16. Overloading - Do not overload wall outlets and extension
cords as this can result in a risk of fire or electric shock.
17. Object and Liquid Entry - Never push objects of any kind into
this video product through any openings as they may touch
dangerous voltage points or short-out parts that could result
in a fire or electric shock. Never spill liquid of any kind on the
video product.
6. Attachments - Do not use attachments not recommended by
the video product manufacturer as they may cause hazards.
7. Water and Moisture- Do not use this video product near
water, for example, near a bath tub, wash bowl, kitchen sink,
or laundry tub, in a wet basement, or near a swimming pool,
and the like.
8. Accessories - Do not place this video product on an unstable
cart, stand, tripod, bracket, or table. The video product may
fall, causing serious injury to a child or adult, and serious
damage to the appliance. Use only with a cart, stand, tripod,
bracket, or table recommended by the manufacturer, or
sold with the video product. Any mounting of the appliance
should follow the manufacturer's instructions and should use
a mounting accessory recommended by the
18. Servicing - Do not attempt to service this video product
yourself as opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all servicing to
qualified service personnel.
19. Damage Requiring Service - Unplug this video product from
the wall outlet and refer servicing to qualified service person-
nel under the following conditions:
manufacturer. An appliance and cart
combination should be moved with care.
Quick stops, excessive force, and uneven
surfaces may cause the appliance and cart
combination to overturn.
9. Ventilation - Slots and openings in the
cabinet are provided for ventilation and to
a. When the power-supply cord or plug is damaged.
ensure reliable operation of the video product and to protect it
from overheating, and these openings must not be blocked or
covered. The openings should never be blocked by placing the
video product on a bed, sofa, rug, or other similar surface. This
video product should not be placed in a built-in installation
such as a bookcase or rack unless proper ventilation is provided
or the manufacturer's instructions have been adhered to.
10. Power Sources - This video product should be operated only
from the type of power source indicated on the marking
label. If you are not sure of the type of power supply to your
home, consult your appliance dealer or local power company.
For products intended to operate from battery power, or
other sources, refer to the operating instructions.
11. Grounding or Polarization - This video product is equipped
with a polarized alternating-current line plug (a plug having
one blade wider than the other). This plug will fit into the
power outlet only one way. This is a safety feature. If you are
unable to insert the plug fully into the outlet, try reversing the
plug. If the plug should still fail to fit, contact your electrician
to replace your obsolete outlet. Do not defeat the safety
purpose of the polarized plug.
12. Power Cord Protection - Power supply cords should be routed
so that they are not likely to be walked on or pinched by
items placed upon or against them, paying particular
attention to cords at plugs, convenience receptacles, and the
point where they exit from the appliance.
13. Outdoor Antenna Grounding - If an outside antenna or
cable system is connected to the video product, be sure the
antenna or cable system is grounded so as to provide some
protection against voltage surges and built-up static charges.
Article 810 of the National Electrical Code, ANSI/NFPA No. 70,
provides information with regard to proper grounding of the
mast and supporting structure, grounding of the lead-in wire
to an antenna discharge unit, size of grounding conductors,
location of antenna-discharge unit, connection to grounding
electrodes, and requirements for the grounding electrode.
(Fig. A)
b. If liquid has been spilled, or objects have fallen into the
video product.
c. If the video product has been exposed to rain or water.
d. If the video product does not operate normally by
following the operating instructions. Adjust only those
controls that are covered by the operating instructions as
an improper adjustment of other controls may result in
damage and will often require extensive work by a quali-
fied technician to restore the video product to its normal
operation.
e. If the video product has been dropped or damaged in any way.
f. When the video product exhibits a distinct change in
performance this indicates a need for service.
20. Replacement Parts - When replacement parts are required, be
sure the service technician has used replacement parts specified
by the manufacturer or have the same characteristics as the
original part. Unauthorized substitutions may result in fire,
electric shock or other hazards.
21. Safety Check - Upon completion of any service or repairs
to this video product, ask the service technician to perform
safety checks to determine that the video product is in proper
operating condition.
22. Heat - This video product should be situated away from heat
sources such as radiators, heat registers, stoves, or other
products (including amplifiers) that produce heat.
–
–
3
EN
E8C1UCD_EN.indd
3
2007/04/03 9:48:51
Download from Www.Somanuals.com. All Manuals Search And Download.
Location and Handling
Maintenance
•
Do not stand this unit up vertically. Install this unit in a
Servicing
horizontal and stable position. Do not place anything directly on
top of this unit. Do not place this unit directly on top of the TV.
• Please refer to relevant topics on the “Troubleshooting Guide”
on page 20 before returning the product.
• If this unit becomes inoperative, do not try to correct the
problem by yourself. There are no user-serviceable parts inside.
Turn off, unplug the power plug, and please call our toll free
customer support line found on the cover of this manual to
locate an authorized service center.
Cleaning the Cabinet
• Use a soft cloth slightly moistened with a mild detergent
solution. Do not use a solution containing alcohol, spirits,
ammonia or abrasive.
• Depending on the TV, noise or disturbance of the picture and/or
sound may be generated if this unit is placed too close to your
TV. In this case, please ensure enough space between your TV
and this unit.
• Do not cover or place this unit in enclosed spaces to prevent
excessive temperature build up.
•
Do not place this unit in direct sunlight, or near heat sources.
• Depending on the environment, the temperature of this unit
may increase slightly. This is not a malfunction.
• Keep this unit away from strong magnetic objects.
• Do not place any object containing water or other liquids on
this unit. In the event that liquid should enter the cabinet,
unplug this unit immediately and contact the retailer or an
authorized service center immediately.
Cleaning Discs
• When a disc becomes dirty, clean it with a cleaning cloth. Wipe
the disc from the center to out. Do not wipe in a circular motion.
• Do not use solvents such as benzine, thinner, commercially
available cleaners, detergent, abrasive cleaning agents or
antistatic spray intended for analog records.
• Do not remove this unit cabinet. Touching parts inside the
cabinet could result in electric shock and/or damage to this unit.
For service and adjustment inside the cabinet, call a qualified
dealer or an authorized service center.
• Be sure to remove disc and cassette tape and unplug the AC
power cord from the output before carrying this unit.
Cleaning the Disc Lens
• If this unit continues to perform improperly even after you have
referred to the relevant sections and to the “Troubleshooting
Guide” in this manual, the laser optical pickup unit may be dirty.
Consult your dealer or an authorized service center for inspection
and cleaning of the laser optical pickup unit.
Avoid the Hazards of Electrical Shock and Fire
• Do not handle the power cord with wet hands.
• Do not pull on the power cord when disconnecting it from AC
outlet. Grasp it by the plug.
Disc Handling
• When you handle a disc, hold it by its edge and try not to touch
• If, by accident, water is spilled on this unit, unplug the power
cord immediately and take the unit to our authorized service
center for servicing.
the surface of the disc.
• Always store the disc in its protective case when not in use.
Auto Head Cleaning
•
Do not put your fingers or objects into the unit cassette holder.
• Automatically cleans video heads as you insert or remove a
cassette tape, so you can see a clear picture.
Moisture Condensation Warning
• Playback picture may become blurred or interrupted while the
TV program reception is clear. Dirt accumulated on the video
heads after a long period of use, or the usage of rental or worn
cassette tapes can cause this problem. If a streaky or snowy
picture appears during playback, the video heads in your unit
may need to be cleaned.
Moisture may form inside this unit under the following conditions:
• Immediately after a heater is turned on.
• In a steamy or humid room.
• When this unit is suddenly moved from a cold to warm
environment.
If moisture forms inside this unit, it may not operate properly or
damage the cassette tape. In such case, do not use this unit at
least for 2 hours until its inside gets dry.
1. Please visit your local audio/video store and purchase a good
quality VHS video head cleaner.
2. If a Video head cleaner does not solve the problem, please call
our toll free customer support line found on the cover of this
manual to locate an authorized service center.
About Copyright
Unauthorized copying, broadcasting, public performance and
lending of discs are prohibited.
Hint
• Remember to read the instructions along with the video head cleaner
before use.
This product incorporates copyright protection technology that
is protected by U.S. patents and other intellectual property rights.
Use of this copyright protection technology must be authorized by
Macrovision, and is intended for home and other limited viewing
uses only unless otherwise authorized by Macrovision. Reverse
engineering or disassembly is prohibited.
• Clean video heads only when problems occur.
© 2007 Funai Electric Co., Ltd.
All rights reserved. No part of this manual may be reproduced,
copied, transmitted, disseminated, transcribed, downloaded or
stored in any storage medium, in any form or for any purpose
without the express prior written consent of Funai. Furthermore,
any unauthorized commercial distribution of this manual or any
revision hereto is strictly prohibited.
Symbols Used in This Manual
The following symbols appear in some headings in this manual.
: Description refers to video cassette tapes.
Information in this document is subject to change without notice.
Funai reserves the right to change the content herein without the
obligation to notify any person or organization of such changes.
:
Description refers to DVD-Video.
: Description refers to Audio CD.
: Description refers to MP3 files.
with the
design is a registered trademark of Funai
Electric Co., Ltd and may not be used in any way without the
express written consent of Funai. All other trademarks used
herein remain the exclusive property of their respective owners.
Nothing contained in this manual should be construed as
granting, by implication or otherwise, any license or right to use
any of the trademarks displayed herein. Misuse of any
trademarks or any other content in this manual is strictly
prohibited. Funai shall aggressively enforce its intellectual prop-
erty rights to the fullest extent of the law.
Note to CATV system installer
This reminder is provided to call the CATV system install-
er’s attention to Article 820-40 of the NEC that provides
guidelines for proper grounding and, in particular, speci-
fies that the cable ground should be connected to the
grounding system of the building, as close to the point
of cable entry as practical.
Manufactured under license from
Dolby Laboratories. “Dolby” and the
double-D symbol are trademarks of Dolby
Laboratories.
–
–
4
EN
E8C1UCD_EN.indd
4
2007/04/03 9:48:51
Download from Www.Somanuals.com. All Manuals Search And Download.
About the Video Cassettes and Discs
Playable Video Cassettes
Use only cassettes marked
Playable Discs
Playable
with this unit.
Recorded
signals
Mark (logo)
Region code
Disc size
Disc types
discs
DVD-Video
*1, 2, 4, 6
or
DVD-RW
DVD-R
*1, 3, 4, 5, 6,
7, 8, 9
e.g.)
12 cm
or
8 cm
title 1
title 2
Digital video
(MPEG2)
chapter 1 chapter 2 chapter 3 chapter 4 chapter 1
chapter 2
DVD+RW
DVD+R
*1, 4, 5, 6, 8, 9
Audio CD
*4, 6
Digital audio
Audio CD
MP3
e.g.)
track 1
track 2
track 3
track 4
track 5
track 6
12 cm
or
8 cm
CD-RW
CD-R
Digital audio
e.g.)
folder 1
folder 2
or
MP3
*4, 5, 6, 8, 9
file 1
file 2
file 3
file 4
file 5
file 6
is a trademark of DVD Format/Logo Licensing Corporation.
If you cannot play back a disc which bears one of the marks above, check the following notes.
*1: This unit conforms to the NTSC color system. Discs recorded in other color systems such as PAL cannot be played back.
*2: Certain DVD-Video discs do not operate as described in this manual due to the intentions of the disc’s producers.
*3: Discs Recorded in the VR (Video Recording) format cannot be played back.
*4: Scratched or stained discs may not be played back.
*5: Some discs cannot be played back because of incompatible recording conditions, characteristics of the recorder or special
properties of discs.
*6: You can play back discs which bear the marks above. If you use non-standardized discs, this unit may not play them back. Even if
they are played back, the sound or video quality will be compromised.
*7: Only the discs recorded in the video format and finalized can be played back.
Unfinalized discs cannot be played back. Depending on the recording status of a disc, the disc may not be played back at all. (the
picture or sound may not be smooth, etc.)
*8: If the recorded portion of the disc is too small (less than 2 3/16 inches (55 mm) across), it may not play back properly.
*9: Do not glue paper or put stickers on to the disc. These may damage the disc, and the unit may not read it correctly.
Unplayable Discs
NEVER play back the following discs. Otherwise, malfunction may result!
DVD-RAM / DVD-Audio / CD-i / Photo CD / Video CD / DVD with region codes other than 1 or ALL / DTS-CD / DVD-ROM for personal
computers / CD-ROM for personal computers
On the following disc, the sound MAY NOT be heard.
Super Audio CD
NOTE: Only the sound recorded on the normal CD layer can be delivered.
The sound recorded on the high density Super Audio CD layer cannot be delivered.
Any other discs without compatibility indications
–
–
5
EN
E8C1UCD_EN.indd
5
2007/04/03 9:48:52
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup
Connections
Please refer to “Basic TV Connection” on the front page before you use this unit.
RF Output Channel
If channel 3 has been already occupied for
broadcasting,
1) Set your TV to channel 4.
2) Insert a pre-recorded tape into this unit.
3) Press [SOURCE] on the unit so that the VCR
SOURCE light is lit.
5) After a few seconds, press and hold
Hint
[PLAY B] on the unit for 3 seconds.
• The RF output channel will change to chan-
nel 4 from channel 3 and you will see a
playback picture.
• The RF output channel does not
change when you adjust tracking
during playback. In case RF output
channel changes, you can easily
switch it back. Start the playback
again then press and hold
• When a picture does not appear on the TV
screen, repeat step 4.
6) Press [STOP C] to stop playback.
•
If noise appears on the TV screen, press [VCR/
TV] on the remote control.
[PLAY B] on the unit for 3 seconds.
4) Press [PLAY B] once.
Hint for Cable Box or Satellite Box
To select channels of the cable box or satellite box
(Back of DVD/VCR)
(Cable box or
Satellite box)
1) Turn on the unit by pressing [STANDBY-ON], then press
[VCR/TV]. The STANDBY-ON indicator on the front panel will
ANT-IN
Satellite or
Cable TV
signal
IN
OUT
ANT-OUT
G
K
/
H
L
light, then press [SKIP/CH.
,
/
] to select channel 3
RF cable
(supplied)
or 4 (the same channel as the output channel of the cable box
or satellite box).
(Back of TV)
• If you use the channel 4, you need to change the unit’s RF
output to channel 4. Refer to “RF Output Channel”.
2) At the TV, select channel 3 or 4 (the same channel as you have
selected at step 1).
3) On the cable box or satellite box, select the channel you want
to view or record.
Select this connection when you want to view or record a
scrambled channel. With this connection, channels cannot be
changed on the unit. You can view or record ONLY the channels you
have selected on the cable box or the satellite box.
•
While you are recording, only the recorded channel can be viewed.
Connection to an Audio System
Method 1
Method 2
Dolby Digital decoder,
MD deck or DAT deck
Stereo system
Audio
COAXIAL
L
R
Digital audio
input jack
Analog audio
input jacks
Audio Coaxial Digital cable
(commercially available)
Audio cable
(supplied)
DVD
AUDIO S-VIDEO
OUT OUT
DVD/VCR
AUDIO OUT
VCR
COMPONENT
DIGITAL
VIDEO OUT
AUDIO OUT
L
AUDIO OUT
(Analog)
R
COAXIAL
DIGITAL
AUDIO OUT
DVD/VCR
or
SETUP > AUDIO >
DOLBY DIGITAL
DVD
Setting
COMPONENT
VIDEO OUT
DIGITAL
AUDIO OUT
AUDIO S-VIDEO
OUT OUT
Connection
L
Connecting to a Dolby Digital decoder
for Dolby Digital audio output.
R
BITSTREAM
Connecting to other equipment (an MD
deck or DAT deck etc.)
without Dolby Digital decoder.
(DVD mode only)
PCM
* To complete these settings, refer to pages 20-21.
Hint
• The audio source on a disc in a Dolby Digital Multi channel surround
format cannot be recorded as digital sound by an MD or DAT deck.
• By hooking this unit up to a Multi channel Dolby Digital decoder, you
can enjoy high-quality Dolby Digital Multi channel surround sound as
heard in the movie theaters.
• Playing a DVD using incorrect settings may generate noise distortion
and may also damage the speakers.
–
–
6
EN
E8C1UCD_EN.indd
6
2007/04/03 9:48:54
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection to a TV
Basic Audio
Method 1
Method 2
Method 3
TV
AUDIO IN
L
R
Better picture
Good picture
Best picture
COMPONENT
VIDEO IN
Y
S-VIDEO IN
VIDEO IN
CB
Audio cable
(supplied)
C
R
S-Video cable
(commercially
available)
Video cable
(supplied)
DVD/VCR
DVD/VCR
AUDIO OUT
VCR
Component Video cable
(commercially available)
L
DVD
DVD/VCR
AUDIO OUT
VCR
COMPONENT
VIDEO OUT
DIGITAL
AUDIO S-VIDEO
AUDIO OUT
OUT
OUT
Y
L
AUDIO IN
VIDEO IN
L
R
C
B
R
R
COAXIAL
VIDEO OUT
R
C
DVD
AUDIO S-VIDEO
OUT OUT
DVD/VCR
VCR
DVD
AUDIO S-VIDEO
OUT OUT
COMPONENT
COMPONENT
VIDEO OUT
VIDEO OUT
or
Y
DVD
AUDIO S-VIDEO
OUT OUT
C
DIGITAL
O
AUDIO OUT
C
C
B
R
VIDEO OUT
L
R
AUDIO OUT
(Analog)
VIDEO OUT
S-VIDEO OUT
COMPONENT VIDEO OUT
Hint
• Connect this unit directly to the TV. If the Audio/Video cables are connected to a VCR, pictures may be distorted due to the copy protection
system.
• The COAXIAL, DVD AUDIO OUT, S-VIDEO OUT and COMPONENT VIDEO OUT jacks are only useful in DVD mode.
After you have completed connections
Press the input selector button (usually TV/VIDEO, INPUT or AUX) on your TV to switch an appropriate external input channel (usually
near channel 0) for viewing the picture from this unit. If the picture does not appear, also refer to the manual accompanying your TV.
INPUT MODES FOR COMMON TV BRANDS
Listed below are inputs for common brand name TV’s.
Admiral:
Curtis Mathis:
GE:
AUX
Panasonic:
RCA:
TV/VIDEO
LINE1, LINE2, 00, 90, 91, 92, 93
INPUT, TV/VCR, 00, 90, 91, 92, 93
INPUT, TV/VCR, 00, 90, 91, 92, 93
Samsung:
Sanyo:
TV/VIDEO
Hitachi:
INPUT, AUX
VIDEO
JVC:
VIDEO, VIDEO1, VIDEO2, VIDEO3
Sharp:
Sony:
Toshiba:
Zenith:
00
Kenwood:
LXI-Series:
Magnavox:
AUX
00
VIDEO1, VIDEO2, VIDEO3
TV/GAME
00
AUX CHANNEL
–
–
7
EN
E8C1UCD_EN.indd
7
2007/04/03 9:48:55
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparation for Use
Turn on the Unit for the First Time
To Preset the Channel Again
1) Press [MENU] until the main menu appears.
2) Select “CHANNEL SET UP” by using [K//L], then press [B]
3) Select “AUTO SET UP” by using [K//L], then press [B]. After scan-
VCR
Operations described in this manual are
mainly based on the remote control.
.
Turn on the TV and set it to channel 3.
• If channel 3 has been already occupied for broadcasting,
see “RF Output Channel” section on page 6.
ning, the tuner stops on the lowest memorized channel.
1
2
To Change the On-Screen Language
1) Press [MENU] until the main menu appears.
2) Select “LANGUAGE SELECT” by using [K/L], then
press [B].
3) Select “ENGLISH” , “FRANCAIS” or “ESPAÑOL” by using [K/
L] then press [CLEAR/C.RESET].
Select your language when turning this unit on for the first time.
Then press [B] to go to next step.
LANGUAGE SELECT
B
ENGLISH
FRANCAIS
ESPAÑOL
[ON]
STANDBY-ON
or
Hint
CH 01
Press [B] to start Auto Set Up.
3
• If you accidentally select Spanish or French and need English: Press
[MENU] and choose SELEC. IDIOMA or SELECTION LANGUE. Press [B]
and select ENGLISH. Finally, press [CLEAR/C.RESET].
• To add or delete channels in this unit, [SKIP/CH. G/K, H/L] button
works on the channel number memorized in this unit, [K/L] works on
all.
AUTO SET UP
Do you connect the cable from the cable box or the satellite box to the
unit’s ANT-IN jack?
Clock Setup
YES
NO
VCR
Yes Press [MENU] to exit.
• Refer to “Hint for Cable Box or Satellite Box” section on page 6.
Press [MENU] and select “CLOCK SET”.
- M E N U -
No Please wait for a few minutes. After scanning...
• The tuner stops on the lowest memorized channel.
• You can select only the channels memorized in this unit by using
[SKIP/CH. G//K , H//L] (or [CHANNEL K///L]).
1
TIMER PROGRAMMING
Then press [B] to go to next step.
AUTO REPEAT [OFF]
CHANNEL SET UP
B
CLOCK SET
MENU
LANGUAGE SELECT
or
• If “AUTO SET UP” appears on the TV screen again, check the cable con-
nections. Then, press [B] once again.
• If the clock is not set, the CLOCK SET screen appears when you
press [MENU]. In this case, go to step 2.
Hint
CLOCK SET
• Repeat these steps only if either there was a power failure or this unit
has been unplugged for more than 30 seconds.
Select the current month.
Then press [B] to go to next step.
2
3
MONTH DAY
1 0 – –
YEAR
– – – –
/
HOUR MINUTE
– – – –
AM/PM
– –
To Select a Channel
:
or
You can select a channel by using the number buttons or
[
SKIP/CH.
G
/
K,
H/L].
CLOCK SET
Select the current day.
Then press [B] to go to next step.
Notes for using the number buttons:
MONTH DAY
YEAR
– – – –
1 0 0 1
/
• When selecting cable channels which are higher than 99, enter
channel numbers as a three-digit number.
(for example: 117, press [1], [1], [7])
HOUR MINUTE
– – – –
AM/PM
– –
:
or
• You must precede single-digit channel numbers with a zero. (for
example: 02, 03, 04 and so on)
CLOCK SET
Select the current year.
Then press [B] to go to next step.
4
5
MONTH DAY
1 0 0 1
YEAR
/
2 0 0 7
HOUR MINUTE
AM/PM
– –
To Add or Delete Channels
– –
:
– –
or
VCR
Select the current hour.
Then press [B] to go to next step.
CLOCK SET
- M E N U -
MONTH DAY
1 0 0 1 MON
YEAR
2 0 0 7
Press [MENU] to select “CHANNEL SET UP”.
/
1
TIMER PROGRAMMING
Then press [B] to go to next step.
AUTO REPEAT [OFF]
HOUR MINUTE
0 5 – –
AM/PM
– –
B
CHANNEL SET UP
CLOCK SET
:
or
MENU
LANGUAGE SELECT
or
CLOCK SET
Select the current minute.
Then press [B] to go to next step.
• If the clock is not set, the “CLOCK SET” screen appears when you
press [MENU]. In this case, press [MENU] again.
6
7
8
MONTH DAY
1 0 0 1 MON
YEAR
/
2 0 0 7
HOUR MINUTE
0 5 4 0
AM/PM
– –
CHANNEL SET UP
:
Select “MANUAL SET UP”.
Then press [B] to go to next step.
or
2
3
4
5
AUTO SET UP
B
MANUAL SET UP
CLOCK SET
Select “AM” or “PM”.
or
MONTH DAY
YEAR
2 0 0 7
1 0 0 1 MON
/
or
HOUR MINUTE
0 5 4 0
AM/PM
P M AM
B
MANUAL SET UP
Select the channel to be added or deleted.
:
PM
CHANNEL 30
ADD
(CATV)
or
or
or
To exit the CLOCK SET screen
MANUAL SET UP
Select “ADD” or “DELETE”.
CHANNEL 30
DELETE
(CATV)
Hint
or
• To go back one step, press [s] (during steps 2 to 7).
• Your clock setting will be lost if either there is a power failure or this
unit has been unplugged for more than 30 seconds.
CLEAR/
C. RESET
To exit the menu
–
–
8
EN
E8C1UCD_EN.indd
8
2007/04/03 9:48:55
Download from Www.Somanuals.com. All Manuals Search And Download.
Function Overview
Front Panel Indicator
Lights up when the inserted disc
is being played back.
Blinks when an unacceptable
disc is inserted.
Lights up during a recording.
Blinks when a recording is paused.
Lights up when the disc is inserted.
OPEN/
CLOSE
VCR
DVD
REC
TIMER
DISC IN
PLAY
PLAY
VIDEO
AUDIO
STANDBY-ON
REW
F.FWD STOP/EJECT PLAY
RECORD
IR
CHANNEL
SOURCE
PREV
STOP
NEXT
Lights up when this unit is in the DVD mode.
Lights up when power is on.
Lights up when the Timer Recording or Lights up when this unit is in the VCR mode.
an OTR recording has been set.
VCR / DVD Switching
You must first select which component you wish to operate with
[SOURCE], as this product is a combination of a VCR and a DVD
player.
OPEN/
CLOSE
OPEN/CLOSE
/EJECT
STANDBY-ON
SPEED
AUDIO
VCR
DVD
DISC IN
PLAY
PLAY
1
4
7
2
5
8
3
6
9
CHANNEL
SOURCE
REV
STOP
NEXT
SKIP/CH.
VCR MODE
VCR/TV
SLOW
Press [VCR] on the remote control.
0
VCR
+10
DVD
(Verify that the VCR SOURCE light is lit.)
VCR button
DVD button
DISPLAY
PAUSE
PLAY
DVD MODE
STOP
SOURCE button
VCR
DVD
Press [DVD] on the remote control.
RECORD
MENU
(Verify that the DVD SOURCE light is lit.)
ENTER
SETUP TOP MENU
RETURN
SOURCE
SEARCH
MODE
CLEAR/
C. RESET
MODE
ZOOM
Hint
DVD SOURCE light
VCR SOURCE light
SUBTITLE
T-SET
ANGLE
REPEAT
A-B
• Pressing only [SOURCE] on the front panel DOES NOT switch the mode
of the remote control. You MUST select the correct mode on the remote
control.
Front & Rear Terminals
2
3
REC
TIMER
DVD
DVD/VCR
VCR
ANT-IN
COMPONENT
VIDEO OUT
AUDIO OUT
DIGITAL
AUDIO S-VIDEO
I
VCR
OUT
OUT
AUDIO OUT
VIDEO
AUDIO
STANDBY-ON
REW
F.FWD STOP/EJECT PLAY
RECORD
ANT-IN
Y
L
4
O IN
AUDIO IN
VIDEO IN
L
I
DEO IN
ANT-OUT
R
1
10
9
C
B
R
ANT-OUT
COAXIAL
VIDEO OUT
R
C
6
3
[Front Panel]
[Rear Panel]
8 7
6
5
6: VIDEO IN jack
1: DVD AUDIO OUT (analog) jacks
Connect a cable coming from the video out jack of a camcorder, another
VCR or an audio-visual source (laser disc player, video disc player, etc.)
here.
7: DVD/VCR VIDEO OUT jack
Connect the supplied video cable here through the video in jack of a
television.
8: COMPONENT VIDEO OUT jacks
Connect optional COMPONENT VIDEO cables here through the COMPO-
NENT VIDEO in jacks of a television. (DVD only)
9: S-VIDEO OUT jack
Connect an optional S-VIDEO cable here through the S-VIDEO in jack of a
television. (DVD only)
10: DIGITAL AUDIO OUT COAXIAL jack
Connect an optional coaxial digital audio cable here through the coaxial
Connect the supplied audio cable here through the audio in jacks of a
television or other audio equipment. (DVD only)
2: DVD/VCR AUDIO OUT jacks
Connect the supplied audio cable here through the audio in jacks of a
television or other audio equipment.
3: AUDIO IN jack
Connect audio cable coming from the audio out jack of a camcorder,
another VCR or an audio source here.
4: ANT-IN jack
Connect your antenna or cable box here.
5: ANT-OUT jack
Connect the supplied RF cable to the antenna input jack of a
television.
digital audio in jack of a decoder or audio receiver. (DVD only)
–
–
9
EN
E8C1UCD_EN.indd
9
2007/04/03 9:48:59
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
DVD mode
VCR mode
Disc/Tape
OPEN/CLOSE
/EJECT
Button
STANDBY-ON
SPEED
AUDIO
(Alphabetical order)
1
4
7
2
5
8
0
3
6
• To select track directly. (CD)
• To select channel.
• The +10 button has no effect
in VCR mode.
1
4
7
2
5
8
3
6
9
• To select chapter or title
directly.
• To select group/track
directly. (MP3)
SKIP/CH.
9
+10
VCR/TV
SLOW
•
•
To search forward/backward
through a disc.
To begin slow forward
playback in the pause mode.
• To search forward/backward
through a disc.
• To forward/backward a tape.
0
VCR
+10
DVD
DISPLAY
PAUSE
A-B
• To repeat between your cho-
sen point of A and B.
•
To repeat between your
chosen point of A and B.
PLAY
ANGLE
AUDIO
• To select camera angles on a
disc.
STOP
RECORD
MENU
• To select audio languages on • To select STEREO, L-ch or R-ch.
a disc.
ENTER
(CD)
SETUP TOP MENU
RETURN
• To remove status number in
program input.
• To remove status number in
program input.
SEARCH
MODE
CLEAR/
C. RESET
MODE
ZOOM
CLEAR/
C. RESET
• To clear the numbers entered • To clear the numbers entered • To exit the VCR Menu.
SUBTITLE
T-SET
incorrectly.
• To cancel the point for A-B
repeat.
incorrectly.
• To cancel the point for A-B
repeat.
• To reset the tape counter.
ANGLE
REPEAT
A-B
DISPLAY
DVD
• To display the current disc
mode.
• To display the current disc
mode.
• To display the current time,
tape counter, and channel.
•
To select the DVD output mode.
•
To select the DVD output mode.
• To activate the remote
control in DVD mode.
• To activate the remote
control in DVD mode.
•
•
•
To select an item
on the VCR Menu.
To advance to the
next VCR Menu.
To go back one
step during clock
and timer setting.
ENTER
• To move the cursor and deter- • To move the cursor and deter-
mine its position.
mine its position.
Installing the Batteries for the
Remote Control
MENU
MODE
Install two AA batteries (supplied)
matching the polarity indicated inside
battery compartment of the remote
control.
•
To call up the Menu on a disc.
• To call up the VCR Menu.
• To arrange the playing order
or play randomly.
• To set black level on/off.
• To set virtual surround
on/off.
• To arrange the playing order
or play randomly.
•
To set virtual surround on/off.
OPEN/CLOSE
/EJECT
1
2
3
• To eject the video
cassette from the VCR.
• To open or close the disc tray. • To open or close the disc tray.
• To pause tape playback or
recording.
• To pause disc playback.
PAUSE
• To advance playback one
frame at a time.
• To pause disc playback.
• To begin disc playback.
• To advance playback one
frame at a time.
• To begin disc playback.
• To begin tape playback.
PLAY
Keep in mind the following when using the
remote control:
RECORD
• To start a recording or One
Touch Recording.
•
Make sure that there is no obstacle between
the remote control and the remote sensor
on the unit.
• To play a track or disc repeat-
edly. (CD)
REPEAT
RETURN
• To play a chapter or title
repeatedly.
• To play a track, group or disc
repeatedly. (MP3)
• The maximum operable ranges from the
unit are as follows.
• To return to the previous
operation in menu.
• To return to the previous
operation in menu.
- Line of sight: approx. 23 feet (7m)
- Either side of center:
approx. 16 feet (5m) within 30°
- Above: approx. 16 feet (5m) within 15°
- Below: approx. 10 feet (3m) within 30°
SEARCH
MODE
• To search track.
• To search chapter, title or
time.
• To call up the index or time
search menu.
• To search time. (CD)
• To search groups. (MP3)
SETUP
• To call up the DVD setup
menu.
• To call up the DVD setup
menu.
• To skip tracks. (CD)
• To skip groups or tracks.
(MP3)
• To change channels.
• To adjust the tracking manu-
ally during playback.
• To view the tape in slow
motion.
SKIP/CH.
SKIP/CH.
• To skip chapters or titles.
SLOW
SPEED
• To select the recording speed.
• To turn the unit on/off.
STANDBY-ON
• To turn the unit on/off.
• To turn the unit on/off.
• To stop playback.
• To stop playback or
recording.
STOP
Hint
• To stop playback.
• Do not mix alkaline and manganese bat-
teries.
SUBTITLE
T-SET
•
To put the VCR into standby
mode for a Timer Recording.
• To select subtitles on a disc.
• Do not mix old and new batteries.
• Always remove batteries from remote
control if they are dead or if the remote
control is not to be used for an extended
period of time. This will prevent battery
acid from leaking into the battery com-
partment.
TOP MENU
VCR
• To call up the Top Menu on a
disc.
•
To select the VCR output mode.
• To activate the remote
control in VCR mode.
VCR/TV
ZOOM
• To select DVD position or TV • To select CD/MP3 position or • To select VCR position or TV
position.
TV position.
position.
• To magnify part of a picture.
(x2 / x3 / x4 / x1/2)
–
–
10
EN
E8C1UCD_EN.indd 10
2007/04/03 9:49:00
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR Functions
Playback
Before:
Turn on the TV and set it to channel 3.
• If channel 3 has been already occupied for broadcasting, see “RF Output Channel” section on page 6.
VCR
Hint
4
1
•
When a tape without
record tab is inserted,
the unit will start
1
Insert a video cassette
into this unit.
2 To start playback
OPEN/CLOSE
/EJECT
STANDBY-ON
SPEED
AUDIO
playback automatically.
Tracking will be
automatically adjusted
upon playback.
1
4
7
2
5
8
3
6
9
PLAY
•
SKIP/CH.
REC
TIMER
VCR/TV
SLOW
VIDEO
AUDIO
STANDBY-ON
REW
F.FWD STOP/EJECT PLAY
RECORD
IR
To adjust the tracking
manually, press [SKIP/
CH. G/K, H/L] (or
0
VCR
+10
DVD
3 To stop playback
4 To eject the cassette
DISPLAY
PAUSE
OPEN/CLOSE
/EJECT
STOP
PLAY
3 2
4
2
[
CHANNEL
K/L]) dur-
STOP
ing playback.
3
Other Operations
To cue or review picture during playback (Picture Search)
Counter Reset
Use [g] or [h ]([F.FWD g] or [REW h]).
Press [CLEAR/C.RESET].
• Press it again and the unit will search in super high speed. (in the
SLP mode only)
To freeze the picture on TV screen during playback (Still mode)
Press [PAUSE F]. Each time you press the button, the picture will
be forwarded by one frame.
• If the picture begins to vibrate vertically in the still mode,
stabilize the picture by using [SKIP/CH. G/K, H/L]
(or [CHANNEL K/L]).
To play back in slow motion (Slow mode)
Press [SLOW] during playback or the still mode.
• If the noise bars appear on the TV screen, you can reduce it by
using [SKIP/CH. G/K, H/L] (or [CHANNEL K/L]).
Auto Rewind
When a tape reaches its end during playback, fast-forward or record-
ing (except Timer Recording and One Touch Recording), the tape
will automatically rewind to the beginning. After rewinding finishes,
the unit will eject the tape.
• If the picture is distorted or rolling vertically, adjust the vertical
hold control on your TV if equipped.
Hint
• Still/Slow mode will be automatically canceled after 5 minutes to prevent damage to the tape and the video head.
• To return to playback from the Picture Search/Still/Slow mode, press [PLAY B].
Index Search
Time Search
You can skip the program backward and forward by the Index
Mark.
You can search backward and forward a specific length of time
on a tape.
VCR
VCR
• Insert a tape into this unit.
• Insert a tape into this unit.
Press [SEARCH MODE] once.
Press [SEARCH MODE] twice.
1
1
SEARCH
MODE
SEARCH
MODE
TIME SEARCH
INDEX SEARCH
– : – –
– –
Select the desired length of time for fast forwarding or
To select Index Mark
2
2
rewinding.
INDEX SEARCH
0 3
TIME SEARCH
2 : 5 0
or
01 ~ 20
or
CURRENT PROGRAM
0:01~ 9:59
Beginning
of the tape
End of
the tape
(1 minute~9 hours and 59 minutes)
Pro.1 Pro.2 Pro.3 Pro.4 Pro.5
02
01
01
02
03
To rewind
3
INDEX MARK
ss
To rewind
3
4
ss
To fast forward
BB
To fast forward
BB
After searching, it automatically starts playback.
4
PLAYB
After searching, it automatically
starts playback.
PLAYB
Hint for Index Search & Time Search
• These functions are not available during recording.
• Press [STOP C] to stop the search.
• If a tape ends during a search, your search will be canceled and the tape
will rewind to the beginning.
Hint
•
The Index Mark will be made automatically at the beginning of each recording.
• The time gap between Index Marks should be greater than 1 minute for
SP mode, 2 minutes for LP mode and 3 minutes for SLP mode.
–
–
11
EN
E8C1UCD_EN.indd 11
2007/04/03 9:49:04
Download from Www.Somanuals.com. All Manuals Search And Download.
Auto Repeat
This function will playback a tape repeatedly from the beginning when the tape reaches the end.
VCR
- M E N U -
- M E N U -
Press [B] for
“AUTO REPEAT”, “ON” or “OFF”.
Press [MENU], and choose
“AUTO REPEAT” during playback.
2
1
TIMER PROGRAMMING
AUTO REPEAT [ON]
CHANNEL SET UP
CLOCK SET
TIMER PROGRAMMING
AUTO REPEAT [OFF]
CHANNEL SET UP
CLOCK SET
B
B
MENU
LANGUAGE SELECT
LANGUAGE SELECT
or
Hint
• To cancel Auto Repeat, follow step 1 above. Then, press [B] so that “OFF” appears beside “AUTO REPEAT”. Press [CLEAR/C.RESET] to exit.
• If menu remains on the TV screen after step 2, press [CLEAR/C.RESET] to exit.
• The Auto Repeat playback will start automatically if you select “AUTO REPEAT” to “ON” in the stop mode.
Recording
Recording & OTR (One Touch Recording)
Before: Turn on the TV and set it to channel 3.
• If channel 3 has been already occupied for broadcasting,
see “RF Output Channel” section on page 6.
3
6
1
2
OPEN/CLOSE
/EJECT
OPEN/
CLOSE
STANDBY-ON
SPEED
AUDIO
VCR
VCR
DVD
REC
TIMER
DISC IN
1
4
7
2
5
8
3
6
9
SKIP/CH.
VIDEO
AUDIO
STANDBY-ON
REW
F.FWD STOP/EJECT PLAY
RECORD
IR
CHANNEL
SOURCE
PREV
STOP
1 Insert a cassette with 2 Select the channel
VCR/TV
SLOW
2
tab into this unit.
to record.
0
VCR
+10
DVD
1
4
7
2
5
8
0
3
6
9
DISPLAY
PAUSE
SKIP/CH.
or
5 6 4
PLAY
Accidental erasure prevention
STOP
5
4
RECORD
MENU
To prevent accidental recording on a recorded
cassette, remove its record tab. To record on it
later, cover the hole with adhesive tape.
3 Press [SPEED] to select the desired tape speed.
ENTER
SETUP TOP MENU
RETURN
SPEED
Record tab
Tape Speed
Type of tape
SP mode
Recording/Playback Time
T60
T120
T160
You CANNOT dub a DVD to a videotape.
1hour
3hours
2hours
6hours
2-2/3hours
8hours
SP
SLP mode
To stop recording temporarily (Pause mode)
Press [PAUSE F].
4 Press [RECORD] repeatedly to select the
desired recording length.
• During the rec-pause mode, five C marks appear on the TV screen. Each C mark rep-
resents one minute.
RECORD
• Press it again to resume recording.
REC
OTR(0:30)
OTR(1:00).....
(Normal recording)
• Pause mode will be automatically canceled after 5 minutes to prevent damage to
the tape and the video head.
REC
OTR(8:00)
OTR(7:30)
Hint
5 To stop recording
6 To eject the record-
ed cassette
• If you want to watch one channel while recording another...
1) If noise appears on the TV screen, press [VCR/TV] to put the unit in TV position.
2) You cannot record one channel while watching another if you have a cable box or satellite
receiver.
OPEN/CLOSE
/EJECT
STOP
Timer Recording
VCR
Select the desired date.
Then press [B] to go to next step.
•
Insert a tape with its record tab into the unit.
4
5
Press [MENU], then select “TIMER PROGRAMMING”.
ONE TIME PROGRAM
PROGRAM NUMBER
1
or
- M E N U -
TIMER PROGRAMMING
1
DATE
1 0 / 2 2 MON
B
TIMER PROGRAMMING
AUTO REPEAT [OFF]
CHANNEL SET UP
CLOCK SET
PROG
DATE
START TIME
END
CHANNEL
REC SPEED
12345678
MENU
START TIME – – : – – – –
END
CHANNEL
TIME – – : – – – –
– –
TIME
LANGUAGE SELECT
REC
SPEED – –
or
Available program number flashes.
• You can set a program one year in advance.
Select an empty program number.
Then press [B] to go to next step.
PROGRAM NUMBER
DATE – – / – –
START TIME – – : – – – –
1
2
3
Select the desired start time (hour).
END
CHANNEL
TIME – – : – – – –
– –
Then press [B] to go to next step.
or
REC
SPEED – –
ONE TIME PROGRAM
PROGRAM NUMBER
or
1
DATE
1 0 / 2 2 MON
START TIME 0 7 : 3 0 – –
Select “ONCE”, “DAILY” (Mon-Fri), or “WEEKLY”.
Then press [B] to go to next step.
END
CHANNEL
TIME – – : – – – –
– –
PROGRAM NUMBER
1
REC
SPEED – –
B
ONCE
DAILY
WEEKLY
or
or
–
–
12
EN
E8C1UCD_EN.indd 12
2007/04/03 9:49:07
Download from Www.Somanuals.com. All Manuals Search And Download.
Select “AM” or “PM”.
Then press [B] to go to next step.
Press [SUBTITLE/T-SET] to set timer standby mode.
6
10
SUBTITLE
T-SET
ONE TIME PROGRAM
PROGRAM NUMBER
1
DATE
1 0 / 2 2 MON
START TIME 0 7 : 3 0 PM
END
TIME – – : – – – –
– –
or
• TIMER indicator on the front panel lights up. The unit will
change to the DVD mode.
CHANNEL
REC
SPEED – –
AM
PM
B
Hint
Repeat the procedure in steps 5 and 6 to set the end time.
7
8
• To go back one step, press [s] during steps 3 to 9.
To Check, Correct or Cancel a Timer Program
Select the desired channel.
1) Press [SUBTITLE/T-SET] then, [VCR] on the remote control.
2) Select main menu by pressing [MENU].
3) Select “TIMER PROGRAMMING” by using [K/L], then press
[B].
4) Select the program number which you want to check by
using [K/L]. The details of the program you selected will
appear on the TV screen.
Then press [B] to go to next step.
ONE TIME PROGRAM
PROGRAM NUMBER
DATE 1 0 / 2 2 MON
START TIME 0 7 : 3 0 PM
1
END
CHANNEL
REC
TIME 0 8 : 3 0 PM
1 6
SPEED – –
or
• If you have connected the unit to a cable box or satellite box
as the connection on page 6, select the VCR to channel 3 or
4 (the RF output channel of the VCR). Then, select the desired
channel at the cable box or satellite box. Leave the cable box or
satellite box on for Timer Recording.
•
Go to the digit you want to change by using [s / B]. Then,
enter correct numbers by using [K/L].
•
You may cancel the entire program by pressing [s] while
the program number blinks.
5) Press [CLEAR/C.RESET] to exit.
6) Press [SUBTITLE/T-SET] to return to timer standby mode.
Select the desired recording speed, then press
9
[CLEAR/C.RESET].
ONE TIME PROGRAM
PROGRAM NUMBER
1
CLEAR/
C. RESET
DATE
1 0 / 2 2 MON
To cancel a Timer Recording in progress
START TIME 0 7 : 3 0 PM
END
TIME 0 8 : 3 0 PM
1 6
or
CHANNEL
Press [STOP/EJECT
C
A] on the unit.
REC
SPEED SP
B
SP
SLP
• To set another program after step 9, press [B].
Then, continue with step 2.
Hints for OTR and Timer Recording
• Press [VCR] on the remote control before you set Timer Recording. Make sure the remote control is in the VCR mode, then
press [SUBTITLE/T-SET].
• If a tape is not in the unit or does not have the record tab, TIMER indicator on the front panel blinks and Timer Recording cannot be
performed. Please insert a recordable tape.
• When Timer Recordings are set, TIMER indicator on the front panel lights up. To use the VCR as usual until the time for the recording,
press [SUBTITLE/T-SET] so that TIMER indicator light turns off. Press [VCR/TV] to choose the VCR position. Select either VCR or DVD
mode, then continue with the other features as described in this manual.
After an OTR or a Timer Recording has been set, this unit operates as follows:
• If a tape runs out before an OTR or a Timer Recording is finished, the unit ejects the tape. Press [SUBTITLE/T-SET] on the remote
control or [STOP/EJECT
C
A] on the unit, then press [VCR] to activate the VCR function again.
• Once the unit turns to the timer standby mode, no VCR functions are available until [SUBTITLE/T-SET] is pressed.
• To cancel the timer standby mode, press [SUBTITLE/T-SET] on the remote control or [STOP/EJECT
[VCR] to activate the VCR function again.
C
A] on the unit, then press
• The mode of the unit and the remote control may differ (VCR mode or DVD mode) when you set Timer Recording or after you can-
celed Timer Recording. Press [VCR] or [DVD] on the remote control to select your desired mode before you operate.
When an OTR or a Timer Recording is completed...
• If Auto Power Off for DVD has been activated and there are Timer Recordings on standby, the unit turns off automatically, and TIMER
indicator on the front panel lights to indicate the unit is in the timer standby mode.
• TIMER indicator on the front panel flashes if there are no more Timer Recordings on standby.
• If Auto Power Off for DVD has NOT been activated, the unit switches to the DVD mode and all the VCR functions will be unavailable.
All the DVD functions are available during OTR, timer standby mode and Timer Recording.
• Press [STOP/EJECT
• Press [SOURCE] on the front panel or [VCR] on the remote control to use the VCR when the unit is on. In case Timer Recording is in
standby mode, press [STOP/EJECT A] on the front panel or [SUBTITLE/T-SET] on the remote control, and then press [SOURCE]
C
A] on the front panel or [SUBTITLE/T-SET] on the remote control to use the VCR when the unit is off.
C
on the front panel or [VCR] on the remote control.
If you want to use the DVD player during a Timer Recording or while TIMER indicator on the front panel is on or blinking.
• Press [STANDBY-ON] to turn on the unit. Press [DVD] on the remote control to choose DVD mode, then continue with the other
DVD features as described in this manual.
NOTE (for Timer Recording) :
• If there is a power failure or the unit is unplugged for more than 30 seconds, clock and all timer settings will be lost.
–
–
13
EN
E8C1UCD_EN.indd 13
2007/04/03 9:49:10
Download from Www.Somanuals.com. All Manuals Search And Download.
Copying a Video Tape
Warning: Unauthorized recordings of copyrighted video tapes may be an infringement of copyright laws.
(Back of TV)
(Back of another source)
(Back of DVD/VCR*)
DVD/VCR
AUDIO OUT
VCR
2
AUDIO OUT
1
or
ANT-IN
L
Connect
AUDIO IN
VIDEO IN
Connect
R
VIDEO OUT
VIDEO OUT
ANT-OUT
RF cable
(supplied)
Audio/Video cables
(commercially available)
*Front input jacks are also available
1) Insert a pre-recorded tape into another VCR for playing.
2) Insert a tape with its record tab into this unit for recording.
3) Press [SPEED] on the remote control of the recording unit to
select the desired recording speed (SP/SLP).
4) Select the “L1” or “L2” position on the recording unit.
Hint
• For best results during dubbing, use the front panel controls whenever
possible. The remote control might affect another source’s operation.
• Always use video-quality shielded cables with RCA-type connectors.
Standard audio cables are not recommended.
• To use the input jacks on the back of this unit, select “L1”
position by pressing [0], [0], [1] on the remote
control or [CHANNEL K/L] on this unit.
• To use the input jacks on the front of this unit, select “L2”
position by pressing [0], [0], [2] on the remote
control or [CHANNEL K/L] on this unit.
• You can use a video disc player, satellite receiver or other audio/video
component with Audio / Video outputs.
• “L1” or “L2” is found below the lowest memorized channel.
(Example: CH02)
• “L2” input jacks are on the front of this unit.
5) Press [RECORD] on the recording unit.
6) Begin playback of the tape in another source.
7) To stop recording, press [STOP/EJECT
C
A] on the record-
ing unit, then stop playback of the tape in another source.
–
–
14
EN
E8C1UCD_EN.indd 14
2007/04/03 9:49:11
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Functions
Operations described in this section are mainly based on the remote control use. Some operations can be carried out on main unit.
Playback
Before: Turn on the TV, amplifier and any
OPEN/
CLOSE
other equipment which are connected to this
unit. Make sure the TV and audio receiver
VCR
DVD
REC
TIMER
DISC IN
PLAY
PLAY
(commercially available) are set to the correct
channel.
VIDEO
AUDIO
STANDBY-ON
REW
F.FWD STOP/EJECT PLAY
RECORD
IR
CHANNEL
SOURCE
PREV
STOP
NEXT
2
DVD
Lights up when power is on.
1
2
4 3
2
1
⇒
Page 16
(
)
OPEN/CLOSE
/EJECT
STANDBY-ON
SPEED
AUDIO
Hint
• When you play an MP3-format disc, details on page 16.
1
4
7
2
5
8
3
6
9
• A “prohibited icon” may appear at the top-right on the TV
screen when the operation is prohibited by the disc or this
unit.
• Some DVDs may start playback from title 2 or 3 due to specific programs.
• During the playback of a two-layered disc, pictures may stop for a
moment. This happens while the 1st layer is being switched to the
2nd layer. This is not a malfunction.
1
2
Press [STANDBY-ON] to turn on the
DVD/CD Player.
SKIP/CH.
VCR/TV
SLOW
Press [OPEN/CLOSE A] and insert a
disc with label facing up.
0
VCR
+10
DVD
DISPLAY
PAUSE
3
4
Press [PLAY B] to start playback.
Press [STOP C] to stop playback.
3
4
PLAY
STOP
TIP
:
You can change the On-Screen language in “PLAYER MENU” setting.
(Refer to page 20.)
DVD menu
Fast Forward / Reverse Search
DVD
DVD
Some discs contain menus which allow you to customize DVD
playback. Use [K / L / s / B] to select an item, then press
[ENTER] (or [PLAY B]).
Use [g] or [h] repeatedly during playback
E
1
to select the required forward or reverse speed.
To use [PREV H / E], [NEXT D / G] on this
unit
Pressing and holding [PREV H / E] or [NEXT D / G] on this
unit will also change forward or reverse playback speed.
Calling Up a Menu Screen during Playback
DVD
To continue playback, press [PLAY B].
• Press [MENU] to call up the DVD menu.
• Press [TOP MENU] to call up the title menu.
Hint
• Fast forward or reverse search speed is different depending on the disc.
Approximate speed is 1(x2), 2(x4), 3(x8), 4(x16) and 5(x32).
Hint
• Menu operations may vary depending on the disc. Refer to the manual
accompanying the disc for more details.
Slow Forward Search
DVD
Resume
DVD
Press [g] repeatedly in the pause mode to
1
select the required forward speed.
Press [STOP C] during playback. Resume icon
will appear at the top-left on the TV screen. Press
To use [NEXT D / G] on this unit
R.STOP
[PLAY B], playback will resume from the point at
which playback was stopped.
Pressing and holding [NEXT D / G] on this unit in the pause
mode will also change forward playback speed.
To continue playback, press [PLAY B].
Hint
• To cancel resume, press [STOP C] one more time in the stop mode.
• The resume information will be kept even when unit is in standby mode
(except MP3). For MP3, playback will resume from the beginning of the
track at which playback was stopped.
Hint
• Slow forward speed is different depending on the disc.
Approximate speed is 1(1/32), 2(1/16), 3(1/8), 4(1/4) and 5(1/2).
• Set “STILL MODE” to “FIELD” in the DISPLAY menu if pictures in the slow
playback mode are blurred. (Refer to pages 20-21.)
• The reverse of slow playback is not available.
Paused and Step-by-Step Playback
DVD
Zoom
Press [PAUSE F] during playback.
DVD
PAUSE
To continue playback, press [PLAY B].
DVD
1) Press [ZOOM] repeatedly during playback to select the
required zoom factor: x2, x3, x4, x1/2 or OFF.
The disc goes forward by one frame each time [PAUSE F] is
pressed in the pause mode.
To continue playback, press [PLAY B].
x2
x3
x4
x1/2
Hint
• Set “STILL MODE” to “FIELD” in the DISPLAY menu if pictures in the
pause mode are blurred. (Refer to pages 20-21.)
2) Use [K / L / s / B] to slide the zoomed picture across the screen.
3) To exit zoom function, press [ZOOM] repeatedly to select OFF.
Hint
To use [PREV H / E], [NEXT D / G] on this unit
• Zooming function does not work while the disc menu is displayed.
• Some parts of the picture may not be zoomed depending on the disc status.
DVD
Press once to skip chapters or tracks to a desired point.
–
–
15
EN
E8C1UCD_EN.indd 15
2007/04/03 9:49:11
Download from Www.Somanuals.com. All Manuals Search And Download.
MP3 Playback
MP3 is a method of compressing files. You can copy MP3 files on CD-R/RWs from the compu-
Hint
ter and play the files on this unit.
• Some selections may take a while to be
recognized.
DVD
• Folders are known as Groups; files are
known as Tracks.
Insert an MP3-format disc, then the file list will automatically appear on the TV screen.
3
• MP3 files are accompanied by
• Folders are accompanied by
• Refer to “On-Screen Display” on
page 17 for more details.
icon.
icon.
1 Select the desired folder from the list on
2 Select the desired file from the list on
the left side in the file list.
the right side in the file list.
• If you record data over 20 times, it may
not be played back correctly.
004/027
001/013
file name1
00:00:36
OFF
001/027
001/007
00:00:12
OFF
file name11
ENTER
ENTER
3
3
3
3
3
3
3
3
3
1. folder1
2. folder2
3. folder3
4. folder4
5. folder5
6. folder6
7. folder7
8. folder8
1. file name1
1. folder1
2. folder2
3. folder3
4. folder4
5. folder5
6. folder6
7. folder7
8. folder8
1. file name11
2. file name12
This player recommends the files record-
ed under the following circumstances:
• Sampling frequency: 44.1kHz or 48kHz.
• Constant bit rate: 32kbps ~ 320kbps.
3
3
3
3
3
3
2. file name2
3. file name3
4. file name4
5. file name5
6. file name6
7. file name7
8. file name8
3. file name13
4. file name14
5. file name15
6. file name16
7. file name17
ENTER
ENTER
or
or
3 Refer to “Resume” on page 15.
PLAY
PLAY
Press [ENTER] or
[PLAY B] .
STOP
Search Functions
Using Track Search
Using Title / Chapter Search
Using Time Search
DVD
DVD
DVD
Using [SEARCH MODE]
Using [SEARCH MODE]
1
PLAY
03/24
001/002
--:--:
--
OFF
1
1
SEARCH
MODE
SEARCH
MODE
--/26
00:00:19
OFF
--/24
001/002
00:00:30
OFF
SEARCH
MODE
<Example : DVD>
or
<Example : CD>
Press cursor [B] to
2
1
4
7
2
5
8
0
3
6
ENTER
--/26
00:00:19
OFF
highlight
.
ENTER
9
CD: once
DVD: twice
+10
within 5 seconds
Press [SEARCH MODE] once for the
title search.
For the chapter search, press
cursor [B] to highlight
ENTER
3 Press [ENTER].
2
.
1
4
7
2
5
8
0
3
6
9
03/24
001/002
--
:--:
--
OFF
• To play a double-digit track, press the
track number directly for CDs (e.g. for
track 3, press [3] and [ENTER]).
• To play a triple-digit track, press the
track number directly for MP3. (e.g. for
track 3, press [3] and [ENTER]. for track
26, press [2], [6] and [ENTER]).
2
1
4
7
2
5
8
0
3
6
03/24
---/002
00:00:32
OFF
<Example : DVD>
within 5 seconds
9
+10
within 5 seconds
ENTER
3 Press [ENTER].
ENTER
3 Press [ENTER].
Using [SKIP/CH. G//K, H/ L]
1
Hint
Current Track
PLAY
Using [SKIP/CH. G//K, H/ L]
• To play time 0:15:00, press [1], [5], [0], [0] of
the number buttons.
• Press [CLEAR/C.RESET] to erase the incor-
rect input at step 2.
• On DVDs/CDs, Time Search is not available
for Programmed or Random Playback.
1
TR 1 TR 2 TR 3 TR 4
SKIP
SKIP/CH. SKIP/CH.
PLAY
Current Chapter
SKIP
CH 1 CH 2 CH 3 CH 4
SKIP/CH. SKIP/CH.
Hint
SKIP
SKIP
• On CDs, Track Search is not available for
Programmed or Random Playback.
Hint
• Depending on the disc being played, this
function can also be performed by directly
entering the desired chapter number with
the number buttons. Refer to the manual
accompanying the disc.
• On DVDs, Title/Chapter Search is not avail-
able for Programmed or Random Playback.
–
–
16
EN
E8C1UCD_EN.indd 16
2007/04/03 9:49:14
Download from Www.Somanuals.com. All Manuals Search And Download.
On-Screen Display
You can check the information about the current disc by pressing [DISPLAY] on the remote control.
DVD
DVD
TR(Track):
current track number / total tracks
T(Title):
current title number / total titles
elapsed time of the current title
current repeat setting
current repeat setting
03/24
001/002
00:00:40
OFF
01/26
00:00:11
OFF
1
2
1
2
elapsed time of the current
track
DISPLAY
C(Chapter):
current chapter number /
total chapters
DISPLAY
CH(Chapter):
current chapter number /
total chapters
TR(Track):
current track number / total
tracks
remaining time of the current
track
remaining time of the current
chapter
01/26
00:00:12 - 00:03:20
NORMAL
001/002 00:00:19 - 00:01:11
NORMAL
current play mode setting
current play mode setting
DISPLAY
elapsed time of the current
track
elapsed time of the current
chapter
DISPLAY
TT(Title):
current title number / total titles
ALL:
current track number / total tracks
remaining time of the current
title
remaining time of the entire
disc
03/24
00:00:20 - 00:01:09
NORMAL
01/26
00:00:14 - 01:11:28
NORMAL
3
4
3
4
current play mode setting
current play mode setting
elapsed time of entire disc
elapsed time of the current title
DISPLAY
DISPLAY
DVD
Hint
• Some DVD discs will not allow you to set chapter playback correctly.
current group number / total
groups
current track number / total
tracks in the current group
elapsed time of the current
track
current repeat setting
004/027
001/013
00:00:36
OFF
1
file name1
3
3
1. folder1
2. f
1. file name1
2. file name2
DISPLAY
TR(Track):
current track number / total
tracks in the current group
elapsed time of the current track
remaining time of the current
track
current play mode setting
001/013 00:00:43 - 00:03:36
NORMAL
2
3
file name1
3
1. folder1
2. f
1. file name1
2. file name2
3
DISPLAY
file name1
3
3
1. folder1
2. f
1. file name1
2. file name2
–
–
17
EN
E8C1UCD_EN.indd 17
2007/04/03 9:49:17
Download from Www.Somanuals.com. All Manuals Search And Download.
Repeat / Random / Programmed Playback
Repeat Playback
Repeat A-B Playback
Programmed Playback
DVD
DVD
DVD
Repeat function is available only during
playback.
You may determine the order in which
chapters or tracks will play.
1
PLAY
1 Press [MODE] once during stop
1
A-
mode.
PLAY
A-B
CHAPTER
MODE
NORMAL
RANDOM
PROGRAM
REPEAT
at your desired starting point (A)
<Example : DVD>
• During playback, press [MODE].
CD/MP3: twice
2
Each time you press [REPEAT], repeat
function changes as example below.
A-B
A-B
DVD:
three times
2 Select “PROGRAM”.
Then press [ENTER].
at your desired ending point (B)
• Point B should be in the same title or
track as point A.
OFF
(repeat off)
ENTER
ENTER
CHAPTER
TITLE
(current chapter repeat)
(current title repeat)
Hint
• To exit the sequence, press [A-B] so that OFF
appears.
DVD-PROGRAM
MAX:
2
• To cancel Point A, press [CLEAR/C.RESET] at
step 1.
• This function does not work in the other
repeat modes.
Total:
3
TITLE CHAPTER PLAY ALL CLEAR
1
4
7
2
5
8
0
3
6
02 007
05 005
01 002
-- --- -- --- -- ---
-- --- -- --- -- ---
-- --- -- --- -- ---
9
(repeat off)
OFF
-- --- -- --- -- --- -- ---
-- --- -- --- -- --- -- ---
+10
TRACK
ALL
(current track repeat)
(entire disc repeat)
Random Playback
<Example : DVD>
DVD
• Up to 20 chapters or tracks can be
programmed.
This function shuffles the playing order
of chapters or tracks instead of play-
back in sequence.
• Enter the desired number with the
number buttons.
DVD: title and chapter number
CD: track number
MP3: folder and track number
(repeat off)
OFF
1 Press [MODE] once during stop
mode.
(current track repeat)
(current group repeat)
(entire disc repeat)
TRACK
GROUP
ALL
3 Select “PLAY”,
MODE
NORMAL
RANDOM
PROGRAM
then press [ENTER].
ENTER
ENTER
• During playback, press [MODE].
CD/MP3: twice
DVD:
three times
Hint
• Repeat setting (except “ALL”) will be cleared
when moving to another title, chapter, track
or group.
Hint
2 Select “RANDOM”.
Then press [ENTER].
• To erase all programs at once, select
“ALL CLEAR’’ and press [ENTER] or press
[CLEAR/C.RESET] at step 2.
• If the title, chapter, folder, track number is
incorrect, the programmed number you
entered will be skipped during programmed
playback.
• Repeat playback may not function with
some discs or during repeat A-B playback.
ENTER
ENTER
• While a program is being played back,
[STOP C] works as follows;
The RANDOM playback will start.
⇒ Press [STOP C] and [PLAY B] next, so
that the programmed playback restarts.
⇒ Press [STOP C] twice and [PLAY B] next,
so that playback restarts from the first
track in the original order. However, your
programmed playback can be restarted
when you follow the above steps. (Your
programs are still stored until either the
disc is removed or the power is turned
off.)
Hint
• During random playback, you cannot go
back to the previous track, using
[SKIP/CH. G/K] allows you to search
chapters or tracks randomly.
• During DVD Random Playback, you can play
chapters in the current title randomly.
• Some DVD discs will not allow you to
set random playback.
• Some DVD discs will not allow you to set
programmed playback.
• During program playback, you cannot setup
“
TITLE’’ (DVD), “
GROUP’’ (MP3).
–
–
18
EN
E8C1UCD_EN.indd 18
2007/04/03 9:49:19
Download from Www.Somanuals.com. All Manuals Search And Download.
Special Settings
Subtitle Language
Each time you press [AUDIO] or
[s / B], the audio language changes as
example below.
Stereo Sound Mode
DVD
DVD
ENG
SPA
FRE
(English audio)
(Spanish audio)
(French audio)
This unit allows you to select a subti-
tle language (if available) during DVD
playback.
This unit allows you to select a sound
mode during CD playback.
1
1
PLAY
PLAY
STEREO
1. ENG/6
AUDIO
SUBTITLE
T-SET
Hint
• Some discs will only allow you to change
the audio setting from the disc menu. Refer
to the manual accompanying the discs for
details.
• If your language is not shown after pressing
[AUDIO] several times, the disc may not have
that language. However, some disc allow
audio language setting on the disc menu.
(Operation varies depending on the disc, so
refer to the manual along with the disc.)
Each time you press [AUDIO] or
[s / B], sound mode changes as example
below.
Each time you press [SUBTITLE/T-SET],
subtitle language changes as example
below.
STEREO (right and left channels
OFF
ENG
FRE
(no subtitles)
are active)
L-ch
R-ch
(left channel is active)
(right channel is active)
(English subtitles)
(French subtitles)
Camera Angles
DVD
Virtual Surround
Some DVD discs may
DVD
contain scenes which have
been shot simultaneously
from various angles. You can
To set subtitle ON/OFF
1
You can enjoy stereophonic virtual world on
your existing 2 channel stereo system.
PLAY
change the camera angle if the
icon
1. ENG/6
1
appears on the screen. If the “ANGLE
ICON” setting is “OFF” in the OTHERS
PLAY
SUBTITLE
T-SET
OFF
menu, the
icon will not appear. (Refer
to pages 20-22.)
MODE
1
2
PLAY
OFF
ENTER
Press twice.
1/8
(once for CD and MP3)
ANGLE
2 Using [s / B], you can select the
Hint
desired sound mode.
Each time you press [ANGLE] or
[s / B], camera angle changes.
• If your language is not shown after pressing
[SUBTITLE/T-SET] several times, the disc
may not have that language. However, some
discs have the subtitle language setting on
the disc menu. (Operation varies depending
on the disc, so refer to the manual along
with the disc.)
ENTER
ROCK
Black Level Setting
DVD
3D:
Sound mode suitable for setting
stereophonic audio.
• When “ ” appears on the TV screen, it
means no subtitle is recorded on the scene.
• Some discs will only allow you to change
the subtitle from the disc menu. Refer to the
manual accompanying the discs for details.
Adjust the Black Level Setting to make the
dark areas of the TV picture brighter.
JAZZ:
ROCK:
POP:
Sound mode suitable for Jazz music
Sound mode suitable for Rock music
Sound mode suitable for Pop music
1
PLAY
CLASSIC: Sound mode suitable for Classic
music
ON
OFF:
No effects (original sound)
Audio Language
MODE
DVD
3
RETURN
This unit allows you to select an audio
language (if multiple languages are avail-
able on disc) during DVD playback.
2
ENTER
OFF
Hint
• Virtual Surround is available only when the
DVD player is connected to a TV or stereo
using the red and white AUDIO OUT jacks on
the DVD player. Also, select the SETUP menu
to use Dolby digital connection (COAXIAL),
and setting in PCM mode.
1
PLAY
ON: Makes the dark areas brighter.
OFF: Shows the original picture as recorded.
1. ENG Dolby D 5.1ch 48k/3
AUDIO
3
RETURN
–
–
19
EN
E8C1UCD_EN.indd 19
2007/04/03 9:49:23
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD
DVD Setup
You can change the settings of the unit.
1 Press [SETUP].
2 Select the desired item.
SETUP
ENTER
ENTER
ENTER
<SETUP MENU>
LANGUAGE
LANGUAGE
AUDIO
AUDIO
SUBTITLE
DISC MENU
PLAYER MENU
SUBTITLE
DISC MENU
PLAYER MENU
DISPLAY menu
PARENTAL menu
AUDIO menu
LANGUAGE menu
OTHERS menu
INITIALIZE menu
DISPLAY_TV ASPECT
LANGUAGE_AUDIO
AUDIO_DRC
PARENTAL_PASSWORD
OTHERS_ANGLE ICON
INITIALIZE_INITIALIZE
TV ASPECT
STILL MODE
4:3 LETTER BOX
4:3 PAN & SCAN
16:9 WIDE
AUDIO
ORIGINAL
ENGLISH
FRENCH
SPANISH
GERMAN
ITALIAN
DRC
DOWN SAMPLING
DOLBY DIGITAL
ON
OFF
PASSWORD
NO
YES
ANGLE ICON
AUTO POWER OFF
ON
OFF
INITIALIZE
YES
SUBTITLE
DISC MENU
PLAYER MENU
SWEDISH
OTHERS
page 20
page 21
page 21
page 22
A
B
C
D
page 22
page 23
E
F
LANGUAGE Setting
A
Follow steps 1 to 2 above.
ENTER
3 Select the desired item.
4 Select the desired language.
5 To exit the menu
SETUP
ENTER
ENTER
ENTER
Hint
LANGUAGE_AUDIO
AUDIO: ∗1 ∗2
(Default: ORIGINAL)
Sets the audio
language.
∗1
AUDIO
ORIGINAL
ENGLISH
FRENCH
SPANISH
GERMAN
ITALIAN
LANGUAGE menu
SUBTITLE
DISC MENU
PLAYER MENU
• Language options are not available
with some discs.
• If OTHERS is selected in the AUDIO,
SUBTITLE or DISC MENU screen, Select
the desired language using
LANGUAGE_AUDIO
SWEDISH
OTHERS
AUDIO
ORIGINAL
ENGLISH
FRENCH
SPANISH
GERMAN
ITALIAN
SUBTITLE
DISC MENU
PLAYER MENU
LANGUAGE_SUBTITLE
SUBTITLE: ∗1 ∗2
(Default: OFF)
Sets the subtitle
language.
[K / L / s / B]. Press [ENTER].
AUDIO
OFF
SUBTITLE
DISC MENU
PLAYER MENU
ENGLISH
FRENCH
SPANISH
GERMAN
ITALIAN
SWEDISH
OTHERS
SWEDISH
OTHERS
LANGUAGE_AUDIO
DUTCH
RUSSIAN
KOREAN
CHINESE
DANISH
JAPANESE
FINNISH
ROMANIAN
IRISH
NORWEGIAN
TURKISH
ICELANDIC
GREEK
PORTUGUESE POLISH
HUNGARIAN
DISC MENU: ∗1
(Default: ENGLISH)
Sets the language in
DVD menu.
LANGUAGE_DISC MENU
CZECH
AUDIO
ENGLISH
FRENCH
SPANISH
GERMAN
ITALIAN
SWEDISH
DUTCH
SUBTITLE
DISC MENU
PLAYER MENU
• Only the languages supported by the
disc can be selected.
∗2
OTHERS
• Language setting for Audio and Sub-
title are not available with some discs.
Then press [AUDIO] and [SUBTITLE/T-
SET]. Details are on page 19.
LANGUAGE_PLAYER MENU
PLAYER MENU
AUDIO
ENGLISH
FRANÇAIS
(Default: ENGLISH)
Sets the language for
the On-Screen Display.
SUBTITLE
DISC MENU
PLAYER MENU
ESPAÑOL
–
–
20
EN
E8C1UCD_EN.indd 20
2007/04/03 9:49:27
Download from Www.Somanuals.com. All Manuals Search And Download.
DISPLAY Setting
B
You can change the display functions. Follow steps 1 to 2 on page 20.
5 To exit the menu
3 Select the desired item.
4
TV ASPECT: (Default: 4:3 LETTER BOX)
SETUP
See Hint on the left.
ENTER
Select the
desired set-
ting.
DISPLAY_TV ASPECT
ENTER
TV ASPECT
STILL MODE
4:3 LETTER BOX
4:3 PAN & SCAN
16:9 WIDE
4:3 LETTER BOX
4:3 PAN & SCAN
16:9 WIDE
Hint
ENTER
STILL MODE:
• Select “AUTO” usually.
DISPLAY menu
ENTER
•
If you select “AUTO”, it
automatically selects the
best resolution setting
(FRAME or FIELD) based on
the data characteristics of
the pictures. (default).
DISPLAY_TV ASPECT
TV ASPECT
STILL MODE
4:3 LETTER BOX
4:3 PAN & SCAN
16:9 WIDE
STILL MODE: (Default: AUTO)
See Hint on the right.
Select the
desired set-
ting.
DISPLAY_STILL MODE
• If you select “FIELD”, the
picture in the still mode
will be stabilized.
ENTER
TV ASPECT
STILL MODE
AUTO
FIELD
FRAME
AUTO
FIELD
FRAME
ENTER
Hint
•
If you select “FRAME”, the
picture in the still mode will
be highly defined.
ENTER
TV ASPECT:
• Select “4:3 LETTER BOX”, so that
black bars may appear on the
top and bottom of the screen.
• Select “4:3 PAN & SCAN” for a full
height picture with both sides
adjusted.
• An individual picture on
the TV screen is called a
“frame”, which consists
of two separate images
called a “field”.
• Some pictures may be
blurred if you select
“AUTO” in the still mode
due to their data charac-
teristics.
• Select “16:9 WIDE” if a wide
screen TV is connected to this
unit.
AUDIO Setting
C
Choose the appropriate audio settings for your equipment. It only affects during the playback of DVD discs. Follow steps 1 to 2 on page
20.
4
3 Select the desired item.
5 To exit the menu
DRC (Dynamic Range Control): (Default: ON)
SETUP
Set to “ON” to compress the range between soft and loud sounds.
ENTER
Select the
AUDIO_DRC
desired set-
ENTER
DRC
DOWN SAMPLING
DOLBY DIGITAL
ON
OFF
ON
OFF
ting.
Hint
DRC:
AUDIO menu
ENTER
ENTER
• This function is available
only on discs which are
recorded in the Dolby
Digital format.
DOWN SAMPLING:
• When playing discs with
copyright protection,
the sound will be down
sampled at 48kHz, even if
you set to “OFF”.
AUDIO_DRC
DRC
DOWN SAMPLING
DOLBY DIGITAL
ON
OFF
DOWN SAMPLING: (Default: ON)
Set to “ON” when outputting in 48kHz.
Set to “OFF” when outputting the original sound.
Select the
desired set-
ting.
AUDIO_DOWN SAMPLING
ENTER
DRC
ON
OFF
ON
OFF
DOWN SAMPLING
DOLBY DIGITAL
ENTER
ENTER
DOLBY DIGITAL: (Default: BITSTREAM)
Set to “BITSTREAM” when the unit is connected to a Dolby Digital
decoder.
• BITSTREAM: Outputs Dolby Digital Signals.
• PCM: Convert the Dolby Digital into PCM (2 channel).
Select the
desired set-
ting.
AUDIO_DOLBY DIGITAL
ENTER
DRC
DOWN SAMPLING
DOLBY DIGITAL
BITSTREAM
PCM
BITSTREAM
PCM
ENTER
ENTER
–
–
21
EN
E8C1UCD_EN.indd 21
2007/04/03 9:49:29
Download from Www.Somanuals.com. All Manuals Search And Download.
PARENTAL Setting
D
Parental Control limits the viewing of discs that exceed your settings. (An incorrect password will not be acceptable.)
This feature prevents your children from viewing inappropriate materials.
Parental Levels
Parental Level allows you to set the rating levels of your DVD discs. Playback will stop if the ratings exceed the levels you set. Follow
steps 1 to 2 on page 20.
3 Press [ENTER], and then
4 Enter your desired
5 Select “LEVEL”.
6 Select the desired
level, and press
[ENTER].
ENTER
ENTER
ENTER
select “YES”.
four digit password.
1
4
7
2
5
8
0
3
6
9
ENTER
ENTER
ENTER
PARENTAL menu
If the password has not
been set yet.
PASSWORD
LEVEL
CHANGE
PASSWORD
LEVEL
CHANGE
PASSWORD
NO
YES
Enter password
- - - -
8 [ADULT]
PARENTAL_PASSWORD
TIPS FOR LEVELS
PASSWORD
NO
YES
Enter a new
password again.
• 8 [ADULT]: DVD software of any grades (adult/general/chil-
dren) can be played back.
• 7 [NC-17]:
• 6 [R]:
No one under 17 admitted
Restricted; under 17 requires accompanying par-
ent or adult guardian
Parental Guidance Recommended
Unsuitable for children under 13
Parental Guidance suggested
General Audience
If the password has been
set already, enter the
PASSWORD
NO
YES
Re-enter password
- - - -
current four-digit password.
• 5 [PGR]:
• 4 [PG13]:
• 3 [PG]:
• 2 [G]:
PARENTAL_CHANGE
PASSWORD
LEVEL
CHANGE
• 1 [KID SAFE]: Suitable for children
Enter password
- - - -
7 To exit the menu
SETUP
If you do not need pa-
rental lock, choose “NO”.
Press [ENTER].
To Change the Password for Parental Controls
You can change your password for parental controls. Follow steps 1 to 2 on page 20.
ENTER
ENTER
6 Select “CHANGE” at step 5
7 Enter your desired
8 Enter your new four-
9 To exit the menu
above.
four digit password.
digit password again.
SETUP
1
4
7
2
5
8
0
3
6
9
1
4
7
2
5
8
0
3
6
9
PARENTAL menu
Hint
• Record the password in case
you forget it.
PARENTAL_CHANGE
PASSWORD
LEVEL
CHANGE
• If you forget the password,
press [4], [7], [3], [7] at step 3
above, then enter your new
password. Password will be
cleared and parental levels will
be set to 8[ADULT].
PASSWORD
LEVEL
PASSWORD
LEVEL
CHANGE
CHANGE
Enter new password
- - - -
Re-enter password
- - - -
OTHERS Setting
E
You can change the other functions. Follow steps 1 to 2 on page 20.
3 Select the desired item.
4
5 To exit the menu
(Default: ON)
ANGLE ICON:
SETUP
Set to “ON” to show the angle icon when
multiple camera angles are available
during DVD playback.
Select the
desired set-
ting.
ENTER
ENTER
ANGLE ICON
ON
ON
AUTO POWER OFF
OFF
OFF
ENTER
ENTER
OTHERS menu
(Default: ON)
Set to “ON” to turn this unit off automati-
cally after 30 minutes of no use.
AUTO POWER OFF:
OTHERS_ANGLE ICON
Select the
desired set-
ting.
ANGLE ICON
AUTO POWER OFF
ON
OFF
ENTER
ANGLE ICON
ON
ON
AUTO POWER OFF
OFF
OFF
ENTER
ENTER
–
–
22
EN
E8C1UCD_EN.indd 22
2007/04/03 9:49:31
Download from Www.Somanuals.com. All Manuals Search And Download.
Reset to the Default Setting (Except for PARENTAL Setting)
F
3 Select the desired PLAYER
MENU Language, using
the number buttons.
2 Select “INITIALIZE”.
Hint
1 Press [SETUP].
• If you do not wish to
initialize at step 2,
press [SETUP] to exit
the menu.
SETUP
STOP
ENTER
ENTER
<SETUP MENU>
SELECT MENU LANGUAGE
Press
twice.
LANGUAGE
INITIALIZE_INITIALIZE
1
2
3
ENGLISH
FRENCH
SPANISH
AUDIO
INITIALIZE
YES
SUBTITLE
DISC MENU
PLAYER MENU
Information
Troubleshooting Guide
If this unit does not perform properly when operated as instructed in this Owner's Manual, check this unit consulting the following checklist.
PROBLEM CORRECTIVE ACTION
No power.
• Make sure the power plug is connected to an AC outlet.
• Make sure the power is turned on.
This unit does not respond
to the remote control.
• Check if the power plug is connected to an AC outlet.
• Check the batteries in the remote control.
• Aim the remote control directly at the remote sensor. If necessary, remove all the obstacles between the sensor and the remote control.
• You have to be within 23 feet (7m) of this unit.
• Check if the right mode is selected. If it’s not in the right mode, press [DVD] or [VCR], whichever you need, on the remote control.
• Check if a cassette tape is in this unit.
• Tune your radio to an empty AM station so that you hear a lot of static. Turn the volume up, then if you hear some signal sound from the radio
in response to your pressing buttons on the remote control, the remote control is working.
• Press and hold any button on remote control toward a digital camera. The remote control is working if you confirm infrared light through the
digital camera.
Poor picture or noise.
• Interference signal may be received. Change the position and orientation of the unit.
Timer recording is impos-
sible.
• Make sure the Timer Recording is set correctly.
• Make sure TIMER indicator on the front panel lights up. If not, press [SUBTITLE/T-SET].
• Make sure the VCR clock is set correctly.
Cannot go into record
mode.
• Make sure the tape has a record tab. If needed, cover the hole with adhesive tape.
• Activate this unit in VCR mode. Press [VCR] on the remote control so that the VCR SOURCE light is lit.
Playback picture is partially
noisy.
• Adjust tracking control for a better picture by pressing [CHANNELL/K]] on the unit or [SKIP/CH. G/K, H/L] on the remote control.
Cannot view a tape but the
audio is OK.
• Head cleaning may be necessary. Refer to “AUTO HEAD CLEANING”.
• Make sure the VCR is not in the Menu mode.
No or poor, playback picture. • Change the RF output channel to CH4. Then select the same channel on the TV.
• Fine tune your TV.
TV programs cannot be seen • Re-check the ANT-IN and ANT-OUT connections. See the front page and page 6.
normally.
• Press [VCR].
•
Press [VCR] on the remote control to activate it in the VCR mode. Check if the VCR SOURCE light is lit, then set it to the TV position by pressing [VCR].
Video or color fades in and
out when making a copy of
a video tape.
• You cannot copy a copyrighted video tape. You are experiencing copy guard protection.
Cannot remove the tape.
No picture.
• Check if this unit is in the VCR mode. If not, press [VCR] on the remote control to switch the mode.
• Connect the video cable firmly.
• Insert a correct video disc that plays on this unit.
• Press [DVD] on the remote control. Check if the DVD SOURCE light is lit. Then try other DVD features.
Disc cannot be played.
No sound.
• Insert the disc.
• Clean the disc.
• Place the disc correctly with the label side up.
• Cancel the parental lock or change the control levels.
• Handle a disc with special care so that it does not have fingerprints, scratches, or dusts on its surface.
• Connect the audio cables firmly.
• Turn the power of the audio component on.
• Correct the audio output settings.
• Correct the input settings on the audio component.
No DTS audio is output
Distorted picture.
• This unit does not support DTS audio.
-This is not a malfunction.
• Connect this unit directly to the TV.
• There are some cases where pictures may be slightly distorted, and those are not a sign of a malfunction.
• Although pictures may stop for a moment, this is not a malfunction.
Audio or subtitle language
does not match the setup.
• The selected language is not available for audio or subtitles on the DVD.
-This is not a malfunction.
The camera angle cannot be • The DVD does not contain sequences recorded from different camera angles.
changed.
-This is not a malfunction.
Audio or subtitle language
cannot be changed.
• The DVD does not contain audio source or subtitles in the selected language.
-This is not a malfunction.
“Prohibited icon”appears on • That operation is prohibited by this unit or the disc.
the screen, prohibiting an
operation.
-This is not a malfunction.
•
Some functions are not available in specific modes, but this is not a malfunction. Read the description in this Owner’s Manual for details on correct operations.
• Playback from a desired track and random playback are not available during program playback.
• Some functions are prohibited on some discs.
–
–
23
EN
E8C1UCD_EN.indd 23
2007/04/03 9:49:33
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
• Designs and specifications are subject to
change without notice.
• If there is a discrepancy between
languages, the default language will be
English.
Video Heads :
Operating temperature :
41°F (5°C) to 104°F (40°C)
Dimensions :
Four Heads
Output signal format :
NTSC color
W : 17 3/16”
(435mm)
H
D
: 3 3/4”
: 9 3/16”
(94mm)
(233mm)
Power source :
120 V AC +/- 10%, 60 Hz +/- 0.5%
Power consumption :
21 W (standby: 3.8W)
Weight :
Approx 6.0lbs
(2.7kg)
LIMITED WARRANTY
FUNAI CORP. will repair this product, free of charge in the CANADA in
the event of defect in materials or workmanship as follows:
DURATION:
PARTS: FUNAI CORP. will provide parts to replace defective parts
without charge for one (1) year from the date of original retail
purchase. Certain parts are excluded from this warranty.
LABOR: FUNAI CORP. will provide the labor without charge for a
period of ninety (90) days from the date of original retail pur-
chase.
TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU OF ALL
OTHER WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL OTHER
LIABILITIES ON THE PART OF FUNAI, ALL OTHER WARRANTIES
INCLUDING THE WARRANTY OF MERCHANTABILITY, AND FITNESS FOR
A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS
REPRESENTATIVES IN CANADA. ALL WARRANTY INSPECTIONS AND
REPAIRS MUST BE PERFORMED BY AN AUTHORIZED SERVICE CENTER.
THIS WARRANTY IS VALID WHEN THE UNIT IS CARRIED-IN TO AN
AUTHORIZED SERVICE CENTER.
IMPORTANT:
LIMITS AND EXCLUSIONS:
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY
HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE. IF, AT ANY
TIME DURING THE WARRANTY PERIOD, YOU ARE UNABLE TO OBTAIN
SATISFACTION WITH THE REPAIR OF THIS PRODUCT, PLEASE CONTACT
FUNAI CORP.
This warranty is extended only to the original retail purchaser. A pur-
chase receipt or other proof of original retail purchase will be required
together with the product to obtain service under this
warranty.
This warranty shall not be extended to any other person or
transferee.
This warranty is void and of no effect if any serial numbers on the prod-
uct are altered, replaced, defaced, missing or if service was attempted
by an unauthorized service center. This limited
warranty does not apply to any product not purchased and used in
CANADA.
This product is produced for home use and this warranty only covers
failures due to defects in material or workmanship which occurs dur-
ing normal use. It does not cover damage which occurs in shipment, or
failures which are caused by repairs, alterations or product not supplied
by FUNAI CORP., or damage which results from accident, misuse, abuse,
mishandling, misapplication,
alteration, faulty installation, improper maintenance, commercial use
such as hotel, rental or office use of this product or damage which
results from fire, flood, lightning or other acts of God.
ATTENTION:
FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS
PRODUCT WITHOUT PRIOR NOTICE.
WARRANTY STATEMENT REGARDING NON AUTHORIZED REPAIRS:
To obtain warranty service, you must take the product, or deliver the
product freight prepaid, in either its original
packaging or packaging affording an equal degree of protection, to any
AUTHORIZED SERVICE CENTER. FUNAI CORP. will not reimburse you for
any service done by unauthorized service
providers without prior written approval.
To locate your nearest AUTHORIZED SERVICE CENTER or for general
service inquiries, please contact us at:
FUNAI CORPORATION
Customer Service
THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY
ACCESSORIES (EXCEPT REMOTE CONTROL), ANY COSMETIC PARTS,
COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS.
FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO
EVENT BE LIABLE FOR ANY GENERAL, INDIRECT OR CONSEQUENTIAL
DAMAGES ARISING OUT OF OR OCCASIONED BY THE USE OF OR THE
INABILITY
Tel :1-800-414-1053
19900 Van Ness Avenue, Torrance, CA 90501
–
–
24
EN
E8C1UCD_EN.indd 24
2007/04/03 9:49:34
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Use Guide
Press [B] to start Auto Set Up.
Connections
CH 01
3
1
Please refer to “Basic TV Connection” on the front page before
you use this unit.
AUTO SET UP
RF Output Channel
Do you connect the cable from the cable box or the satellite box to the
unit’s ANT-IN jack?
If channel 3 has been already occupied for broadcasting,
1) Set your TV to channel 4.
2) Insert a pre-recorded tape into this unit.
3) Press [SOURCE] on the unit so that the VCR SOURCE light is
lit.
• If noise appears on the TV screen, press [VCR/TV] on the
remote control.
4) Press [PLAY B] once.
5) After a few seconds, press and hold [PLAY B] on the unit for
3 seconds.
• The RF output channel will change to channel 4 from channel
3 and you will see a playback picture.
• When a picture does not appear on the TV screen, repeat
step 4.
YES
NO
Yes Press [MENU] to exit.
No Please wait for a few minutes.
After scanning...
• The tuner stops on the lowest memorized channel.
• You can select only the channels memorized in this unit by using
[SKIP/CH. G/K, H/L] (or [CHANNEL K/L]).
• If “AUTO SET UP” appears on the TV screen again, check the cable con-
nections. Then, press [B] once again.
6) Press [STOP C] to stop playback.
Clock Setup
5
VCR
Installing the Batteries for the Remote
Control
2
- M E N U -
Press [MENU] and select “CLOCK SET“.
Then press [B] to go to next step.
1
TIMER PROGRAMMING
1
2
AUTO REPEAT [OFF]
CHANNEL SET UP
3
B
CLOCK SET
MENU
LANGUAGE SELECT
or
• If the clock is not set, the CLOCK SET screen appears when you
press [MENU]. In this case, go to step 2.
VCR/DVD Switching
3
CLOCK SET
Select the current month.
Then press [B] to go to next step.
2
3
MONTH DAY
1 0 – –
YEAR
– – – –
/
OPEN/
CLOSE
OPEN/CLOSE
/EJECT
STANDBY-ON
SPEED
AUDIO
HOUR MINUTE
– – – –
AM/PM
– –
VCR
DVD
DISC IN
PLAY
:
1
4
7
2
5
8
3
6
9
CHANNEL
SOURCE
PREV
STOP
PLAY
NEXT
or
SKIP/CH.
VCR/TV
SLOW
0
VCR
+10
DVD
VCR button
DVD button
DISPLAY
PAUSE
CLOCK SET
Select the current day.
Then press [B] to go to next step.
MONTH DAY
YEAR
– – – –
PLAY
1 0 0 1
/
STOP
SOURCE button
VCR
DVD
RECORD
MENU
HOUR MINUTE
– – – –
AM/PM
– –
ENTER
:
or
SETUP TOP MENU
RETURN
SOURCE
SEARCH
MODE
CLEAR/
C. RESET
MODE
ZOOM
DVD SOURCE light
VCR SOURCE light
SUBTITLE
T
-SET
ANGLE
REPEAT
A-B
CLOCK SET
Select the current year.
Then press [B] to go to next step.
4
5
MONTH DAY
1 0 0 1
YEAR
/
2 0 0 7
HOUR MINUTE
AM/PM
– –
– –
:
– –
or
VCR MODE
Press [VCR] on the remote control. (Verify that the VCR SOURCE
Select the current hour.
Then press [B] to go to next step.
CLOCK SET
light is lit.)
MONTH DAY
1 0 0 1 MON
YEAR
2 0 0 7
/
DVD MODE
Press [DVD] on the remote control. (Verify that the DVD SOURCE
light is lit.)
HOUR MINUTE
0 5 – –
AM/PM
– –
:
or
CLOCK SET
Hint
Select the current minute.
Then press [B] to go to next step.
6
7
8
MONTH DAY
1 0 0 1 MON
YEAR
2 0 0 7
• Pressing only [SOURCE] on the front panel DOES NOT switch the mode
of the remote control. You MUST select the correct mode on the remote
control.
/
HOUR MINUTE
0 5 4 0
AM/PM
– –
:
or
CLOCK SET
Select “AM” or “PM”.
Turn on the Unit for the First Time
4
MONTH DAY
1 0 0 1 MON
YEAR
2 0 0 7
/
VCR
HOUR MINUTE
0 5 4 0
AM/PM
P M AM
or
:
B
PM
Turn on the TV and set it to channel 3.
• If channel 3 has been already occupied for
broadcasting, see “RF Output Channel” section.
1
To exit the CLOCK SET screen
Select your language when turning this unit on for the first time.
2
Then press [B] to go to next step.
LANGUAGE SELECT
B
ENGLISH
FRANCAIS
ESPAÑOL
[ON]
STANDBY-ON
or
–
–
25
EN
E8C1UCD_EN.indd 25
2007/04/03 9:49:34
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Use Guide
DVD mode
VCR mode
VCR Playback
6
Disc/Tape
Button
(Alphabetical order)
Before: Turn on the TV and set it
to channel 3.
• If channel 3 has been already oc-
cupied for broadcasting, see “RF
Output Channel” section.
1
4
7
2
5
8
0
3
6
• To select track directly. (CD)
• To select group/track
directly. (MP3)
• To select channel.
• The +10 button has no effect
in VCR mode.
• To select chapter or title
directly.
9
+10
•
•
To search forward/backward
through a disc.
To begin slow forward
playback in the pause mode.
VCR
• To search forward/backward
through a disc.
• To forward/backward a tape.
A-B
• To repeat between your cho-
sen point of A and B.
•
To repeat between your
chosen point of A and B.
Insert a video
cassette into this unit.
To start
playback
2
4
1
3
ANGLE
AUDIO
• To select camera angles on a
disc.
PLAY
• To select audio languages on • To select STEREO, L-ch or R-ch.
a disc.
(CD)
To stop
playback
To eject the
cassette
• To remove status number in
program input.
• To remove status number in
program input.
CLEAR/
C. RESET
• To clear the numbers entered • To clear the numbers entered • To exit the VCR Menu.
OPEN/CLOSE
/EJECT
incorrectly.
incorrectly.
• To cancel the point for A-B
repeat.
• To reset the tape counter.
STOP
• To cancel the point for A-B
repeat.
DISPLAY
DVD
• To display the current disc
mode.
• To display the current disc
mode.
• To display the current time,
tape counter, and channel.
DVD/CD Playback
•
To select the DVD output mode.
•
To select the DVD output mode.
7
• To activate the remote
control in DVD mode.
• To activate the remote
control in DVD mode.
Before: Turn on the TV, amplifier and any
other components which are connected
to this unit. Make sure the TV and audio
receiver (commercially available) are set
to the correct channel.
•
•
•
To select an item
on the VCR Menu.
To advance to the
next VCR Menu.
To go back one
step during clock
and timer setting.
ENTER
• To move the cursor and deter- • To move the cursor and deter-
mine its position.
mine its position.
MENU
MODE
•
To call up the Menu on a disc.
• To call up the VCR Menu.
DVD
• To arrange the playing order
or play randomly.
• To set black level on/off.
• To set virtual surround
on/off.
• To arrange the playing order
or play randomly.
•
To set virtual surround on/off.
1
3
2
OPEN/CLOSE
/EJECT
OPEN/CLOSE
/EJECT
STANDBY-ON
• To eject the video
cassette from the VCR.
• To open or close the disc tray. • To open or close the disc tray.
• To pause tape playback or
recording.
• To pause disc playback.
PAUSE
Insert a disc with
label facing up.
• To advance playback one
frame at a time.
• To pause disc playback.
• To begin disc playback.
• To advance playback one
frame at a time.
To stop
playback
To start
playback
• To begin disc playback.
• To begin tape playback.
4
PLAY
RECORD
• To start a recording or One
Touch Recording.
STOP
PLAY
• To play a track or disc repeat-
edly. (CD)
• To play a track, group or disc
repeatedly. (MP3)
• To return to the previous
operation in menu.
• To search track.
• To search time. (CD)
• To search groups. (MP3)
• To call up the DVD setup
menu.
• To skip tracks. (CD)
• To skip groups or tracks.
(MP3)
REPEAT
RETURN
• To play a chapter or title
repeatedly.
• To return to the previous
operation in menu.
Remote Control
8
SEARCH
MODE
• To search chapter, title or
time.
• To call up the index or time
search menu.
OPEN/CLOSE
/EJECT
STANDBY-ON
SPEED
AUDIO
SETUP
• To call up the DVD setup
menu.
1
4
7
2
5
8
3
6
9
SKIP/CH.
• To change channels.
• To adjust the tracking manu-
ally during playback.
• To view the tape in slow
motion.
SKIP/CH.
SKIP/CH.
• To skip chapters or titles.
VCR/TV
SLOW
SLOW
0
VCR
+10
DVD
DISPLAY
PAUSE
SPEED
• To select the recording speed.
• To turn the unit on/off.
PLAY
STOP
STANDBY-ON
RECORD
MENU
• To turn the unit on/off.
• To turn the unit on/off.
• To stop playback.
ENTER
• To stop playback or
recording.
STOP
• To stop playback.
SETUP TOP MENU
RETURN
SEARCH
MODE
CLEAR/
C. RESET
SUBTITLE
T-SET
MODE
ZOOM
•
To put the VCR into standby
mode for a Timer Recording.
• To select subtitles on a disc.
SUBTITLE
T-SET
ANGLE
REPEAT
A-B
TOP MENU
VCR
• To call up the Top Menu on a
disc.
•
To select the VCR output mode.
• To activate the remote
control in VCR mode.
VCR/TV
ZOOM
• To select DVD position or TV • To select CD/MP3 position or • To select VCR position or TV
position.
TV position.
position.
• To magnify part of a picture.
(x2 / x3 / x4 / x1/2)
Printed in China
E8C1UCD
1VMN23713 ★★★★★
E8C1UCD_EN.indd 26
2007/04/03 9:49:36
Download from Www.Somanuals.com. All Manuals Search And Download.
|