MATRIX SWITCHERS
DXP 44 SDI &
I Serial digital data rates from 143
Mbps to 360 Mbps
DXP 88 SDI
I SMPTE 259M compliant
SERIAL DIGITAL VIDEO MATRIX SWITCHERS
I Automatic input cable equalization
I Digital Sync Validation Processing
(DSVP™)
I Automatic rate selection
I Output data muting when input
source is lost
I 16 global memory presets
I LCD display
I RS-232/422 remote control
I Extron’s Simple Instruction Set
(SIS™)
I Windows®-based control program
DXP 44 SDI
DXP 88 SDI
The Extron Digital XPoint Series of SDI digital matrix switchers is ideal for
switching multiple serial digital video signals to multiple digital video devices in
post production studios, non-linear editing suites, staging events, and video
broadcast studios.
Download from Www.Somanuals.com. All Manuals Search And Download.
DESCRIPTION
FEATURES
Extron’s Digital XPoint Series of digital video matrix switchers is the
ideal solution for switching multiple serial digital video signals to
multiple digital video devices in video production studios, non-linear
editing suites, staging events, and video broadcast studios.
I 16 global presets – Frequently-used I/O configurations may be
saved and recalled either from the Front Panel Controller or serial
control. This time-saving feature allows you to set up I/O
configurations and store them in memory for future use.
I RS-232 and RS-422 control – Allows for firmware updates and
serial control via a third-party control system using Extron’s
Simple Instruction Set (SIS™)
There are two models available in the Digital XPoint line: a four input
by four output model (DXP 44 SDI) and a eight input by eight output
model (DXP 88 SDI). Each input has an equalized and buffered loop-
through, and each output has dual buffered and re-clocked BNC
outputs.
I Simple Instruction Set (SIS™) – A set of basic ASCII code
commands for serial control. Instead of programming in long,
obscure strings of code, SIS makes it easy to program and
operate the DXP Series using serial control.
The Digital XPoint series conforms to the SMPTE 259M specification.
These digital matrix switchers handle all composite (143 and 177
Mbps), component 4:2:2 (270 Mbps), and widescreen 16:9
(360 Mbps) serial standards. Automatic cable equalization typically
equalizes greater than 300 meters at 270 Mbps of Extron SHR or
equivalent high quality cable.
I Control Software – Provides a graphical, drag-and-drop interface
for I/O configuration and other customization functions via
RS-232 and RS-422 remote control. This software also offers an
emulation mode for configuration of an offsite matrix switcher;
the I/O configuration may be saved for future downloading to the
matrix switcher.
I MCP 1000 and MKP 1000 control – Optional control panels and
keypads provide the flexibility to control a DXP Series matrix
switcher from a remote location.
The Digital XPoint matrix switcher series is housed in a rack mountable,
1U high, 19" wide enclosure. These switchers come standard with a
front panel control and are capable of communicating with Extron’s
remote keypad (MKP 1000) and/or remote control panel (MCP 1000).
Control of the Digital XPoint series from a third party control system
can be done via RS-232 or RS-422 using Extron’s Simple Instruction Set
(SIS™).
MCP 1000
MKP 1000
I LCD display – Displays current input/output configuration, preset
configurations, data rate, and input carrier detect, as well as the
status of additional system features.
FEATURES
I Inputs with equalized and buffered loop-throughs
I Outputs each with two buffered and re-clocked BNCs
I Serial digital data rates from 143 Mbps to 360 Mbps –
I Extron’s control software – Extron has developed a Windows®-
based control software that provides the ability to control every
Extron matrix switcher. This program makes input/output
configuration and other customization functions simple and
convenient because it uses graphic icons.
I Capable of switching 4fsc (composite) or 4:2:2 (component)
serial digital video transmission standards.
I SMPTE 259M compliant
I Automatic input cable equalization – Typically equalizes greater
than 300m at 270 Mbps of Extron SHR or equivalent high quality
cable.
I Digital Sync Validation Processing (DSVP™) – When input serial
data is locked, the matrix indicates the presence of a carrier
source.
I Automatic rate selection – Automatically accepts four SMPTE
data rates, including 143, 177, 270, and 360 Mbps. The auto
mode is ideal for multirate serial data protocols where the matrix
automatically detects and locks onto the incoming data signal.
I Output data muting when input source is lost – An internal
muting function forces the serial data outputs to a static state
when input data is not present or not locked.
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
VIDEO
CONTROL/REMOTE — SWITCHER
Routing
Serial control port ...................... RS-232 or RS-422, 9-pin female D
DXP 44 SDI ............................ 4 x 4 matrix
DXP 88 SDI ............................ 8 x 8 matrix
Data rates .................................. 143 Mbps, 177 Mbps, 270 Mbps, 360
Mbp
Auto data rate lock .................... Yes
Standard .................................... SMPTE 259M
Data types .................................. 8 bit or 10 bit
connector
Baud rate and protocol .............. 9600 baud, 8 data bits, 1 stop bit, no
parity
Serial control pin configurations .. 2 = TX, 3 = RX, 5 = GND
Program control.......................... Extron’s control/configuration program
for Windows® Extron’s Simple Instruction
Set (SIS™)
VIDEO INPUT
GENERAL
Number/signal type
DXP 44 SDI ................................ 4 SDI serial digital video (8 or 10 bit
SMPTE 259 M widescreen 16:9,
Power ........................................ 100 VAC to 240 VAC, 50/60 Hz, 40
watts, internal, autoswitchable
Temperature/humidity ................ Storage: -40 to +158 °F (-40 to +70 °C)
/ 10% to 90%, noncondensing
component 4:2:2, and composite video)
inputs, and 4 buffered loop-throughs
Operating: +32 to +122 °F (0 to +50 °C)
DXP 88 SDI ................................ 8 SDI serial digital video (8 or 10 bit
SMPTE 259 M widescreen 16:9,
/ 10% to 90%, noncondensing
Rack mount ................................ Yes, with included mounting brackets,
1U high. These can also be mounted
component 4:2:2, and composite video),
and 8 buffered loop-throughs
under or through furniture with the
Connectors
provided brackets.
DXP 44 SDI ............................ 4 female BNC for input, 4 female BNC
for loop-through
DXP 88 SDI ............................ 8 female BNC for input, 8 female BNC
for loop-through
Enclosure type ............................ Metal
Enclosure dimensions.................. 1.75" H x 17.5" W x 9.5" D (1U high,
full rack wide) 4.4 cm H x 44.4 cm W x
24.1 cm D (Depth excludes connectors.
Input cable equalization.............. 1 to 300 m for data rates up to 270
Mbps 1 to 200 m for data rates up to
360 Mbps
Auto equalization........................ Yes
Input return loss ........................ >15 dB, 5 MHz to 270 MHz
Recommended cable type .......... Extron SHR or equivalent
Impedance.................................. 75 ohm
External sync (genlock) .............. 0.3 V to 0.4 Vp-p
Width excludes rack ears.)
Product weight .......................... 4.9 lbs (2.2 kg)
Shipping weight ........................ 8 lbs (4 kg)
Vibration .................................... ISTA 1A in carton (International Safe
Transit Association)
Listings ...................................... UL, CUL
Compliances .............................. CE, FCC Class A, AS/NZS, ICES
MTBF.......................................... 30,000 hours
Warranty .................................... 3 years parts and labor
NOTE: All nominal levels are at 10%.
VIDEO OUTPUT
Number/signal type
DXP 44 SDI ............................ 4 dual SDI serial digital video (SMPTE
259 M widescreen 16:9, component
Model
Part Numbers
DXP 44 SDI ................................ 60-402-01
DXP 88 SDI ................................ 60-401-01
4:2:2, and composite video)
DXP 88 SDI ............................ 8 dual SDI serial digital video (SMPTE
259 M widescreen 16:9, component
4:2:2, and composite video)
Connectors
DXP 44 SDI ............................ 4 x 2 BNC female
DXP 88 SDI ............................ 8 x 2 BNC female
Number of outputs per channel .. 2 outputs per channel
Nominal level.............................. 0.8 V 10%
Impedance.................................. 75 ohms
Return loss.................................. >40 dB @ 5 MHz
DC offset .................................... 500 mV maximum with input at 0
offset
Jitter............................................ <0.2 µs p-p
DC offset .................................... 0.5 V ( ) (termin. @ 75 ohms)
Rise and fall time (20-80%) ........ 0.6 ns = 100 ps
Specifications are subject to change without notice.
Download from Www.Somanuals.com. All Manuals Search And Download.
APPLICATION DIAGRAM
Extron
DXP 88 SDI
Matrix Switcher
22
4
2/
23
RS
IN
K
N
LI
T
A
C
8
NET
T
H
ET
.
7
EF
.
R
T
EX
6
5
4
3
2
S
UT
1
OU
8
7
6
5
4
3
2
S
1
IN
AX
M
A
1.5
RS-232
RS-422
Serial
Communications
Hz
-60
50
40V
0-2
10
Preview 1 Camera 1
Preview 2
Camera 2
External
Reference
D-VTR
IN
-2
32
RS 22
/4
G
E
N
L
O
C
K
D1
O
DE
VI
EO
VID
S-
V
H-Y
H/
B-Y
B/
Y
G/
O
U
T
P
U
T
R
-Y
R/
PROGRAM
OUT
V
H
S
V
/H
2
B
-Y
/B
/
G
/Y
R
Y
-
/R
Y
-
B/R
G
1
/
I
A
N
P
U
T
0.3
0V
-24
100
S
5
3
0
4
3
3
3
2
3
1
0
3
0
2
0
1
0
0
0
0
3
3
4
0
5
0
0
6
2
0 8 2
0 9 2
0 7 2
0
0 6
0 7
4 2
0
0
9
0 3
2 2
0
0
1
1 2
0
0
0
0
1
1
0 0 2
8 1 0 9 1
0
2
0
3
1
1
4
1
5
0
6
1
0
7
1
5/
Extron
VSC 900D
Video Scan
Vectorscope
Media
Servers
Program
Preview
Converter
Character/
Logo Generator
Digital Video
Edit Station
PANEL DRAWINGS
STATUS
INPUTS
OUTPUTS
CONTROL
OUTPUTS
INPUTS
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
ENTER PRESET
1 2 3 4
1 2 3 4
DXP 44 SDI
DXP 44 SDI Front
1.5A MAX
RS232/422
1
2
3
4
IN
1
2
3
4
OUT
INPUTS
OUTPUTS
EXT. REF.
100-240V
50-60Hz
DXP 44 SDI Back
STATUS
CONTROL
INPUTS
OUTPUTS
OUTPUTS
INPUTS
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
ENTER PRESET
1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8
DXP 88 SDI
DXP 88 SDI Front
1.5A MAX
RS232/422
1
2
3
4
5
6
7
8
IN
1
2
3
4
5
6
7
8
OUT
INPUTS
OUTPUTS
EXT. REF.
100-240V
50-60Hz
DXP 44 SDI Back
Extron Electronics, Europe
Extron Electronics, Asia
Extron Electronics, Japan
Extron Electronics, USA
1230 South Lewis Street
Anaheim, CA 92805
800.633.9876 714.491.1500
FAX 714.491.1517
Beeldschermweg 6C
135 Joo Seng Rd. #04-01
Daisan DMJ Bldg. 6F, 3-9-1 Kudan Minami
Chiyoda-ku, Tokyo 102-0074
Japan
3821 AH Amersfoort, The Netherlands
+800.3987.6673 +31.33.453.4040
FAX +31.33.453.4050
PM Industrial Bldg., Singapore 368363
+800.7339.8766 +65.6383.4400
FAX +65.6383.4664
+81.3.3511.7655 FAX +81.3.3511.7656
04-10
68-560-01
REV. B
© 2004 Extron Electronics. All rights reserved. All trademarks mentioned are the property of their respective owners.
Download from Www.Somanuals.com. All Manuals Search And Download.
|