Excell Precision Scale Counting Scale User Manual
EXCELL PRECISION CO., LTD.  
USER MANUAL  
© Excell Precision Limited 2006. All rights reserved Worldwide.  
The information contained herein is the property of Excell Precision Limited and is  
supplied without liability for errors or omissions. No part may be reproduced or used  
except as authorised by contract or other written permission. The copyright and the  
foregoing restriction on reproduction and use extend to all media in which the  
information may be embodied.  
Counting  
ZSME200000003  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EXCELL PRECISION CO., LTD.  
TABLE OF CONTENTS  
INSTRUCTIONS FOR USE.............................................................................................3  
PREPARING TO USE THE SCALE................................................................................3  
CHAPTER 1 PRODUCT INTRODUCTION.....................................................................4  
1-1 DISPLAYS .........................................................................................................4  
1-2 KEYBOARD FUNCTION ...................................................................................6  
1-3 POWER SOURCES...........................................................................................9  
CHAPTER 2 OPERATION............................................................................................10  
2-1 SWITCH SCALE ON........................................................................................10  
2-2 SWITCH SCALE OFF......................................................................................10  
2-3 DISPLAY BACKLIGHT....................................................................................10  
2-4 SAMPLING SPEED & BACK TO ZERO SETTING.........................................11  
2-5 AUTO CALIBRATION......................................................................................12  
2-6 ZERO FUNCTION............................................................................................12  
2-7 UNIT WEIGHT CALIBRATION........................................................................13  
2-8 COUNTING......................................................................................................14  
2-8-1 The Unit Weight of Object is Unknown..............................................14  
2-8-2 The Unit Weight of Object is Known..................................................14  
2-9 DEDUCTION OF CONTAINER WEIGHT ........................................................15  
2-9-1 The Weight of Container is Unknown ( Tare ) ...................................15  
2-9-2 Clear Tare Value...................................................................................15  
2-9-3 The Weight Container is Known (Pre-set Tare).................................16  
2-9-4 Clear The Pretare Value.......................................................................17  
2-10 TOTALISING .................................................................................................18  
2-10-1 Quantity totalising .............................................................................18  
2-10-2 Recall Quantity Totalised..................................................................19  
2-10-3 Weight Totalising...............................................................................19  
2-10-4 Recall Weight Total............................................................................19  
2-10-5 Clear all Totalised Values .................................................................20  
CHAPTER 3 USER INTERFACE SETTING .................................................................21  
3-1 M+ KEY ACTION........................................................................................21  
3-2 PRE-SET TARE...............................................................................................21  
3-3 PRE-SET QUANTITY CONDITIONS...............................................................22  
3-4 M+ OPERATION.........................................................................................22  
3-5 M+ CONTINUOUS OPERATION (Only After Return to Zero)..................23  
3-6 MULTIPLE UAGE KEY U.W.PST / (kg/lb) FUNCTION SELECTION...........23  
3-7 BAUD RATE SETTING (for only with the serial interface) ..........................25  
Counting  
ZSME200000003  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
EXCELL PRECISION CO., LTD.  
CHAPTER 4 KEYBOARD TYPES ................................................................................26  
4-1 STANDARD TYPE...........................................................................................26  
4-2 TYPE I  
DUAL WEIGHING UNIT..................................................................27  
4-2-1 Unit Selection.......................................................................................27  
4-2-2 Quantity Preset ....................................................................................27  
4-2-3 Weight Preset.......................................................................................28  
4-3 TYPE II  
UNIT WEIGHT PRESET ................................................................29  
4-3-1 Unit Weight Preset Stores...................................................................29  
4-3-2 Quantity Preset ....................................................................................30  
4-3-3 Weight Preset.......................................................................................31  
4-4 COMBINATION TYPE  
DUAL WEIGHING UNIT + UNIT WEIGHT PRESET  
...............................................................................................................................32  
4-4-1 Unit Selection.......................................................................................32  
4-4-2 Unit Weight Preset Stores...................................................................33  
4-4-3 Quantity Preset ....................................................................................34  
4-4-4 Weight Preset.......................................................................................35  
CHAPTER 5 INTERFACE.............................................................................................36  
5-1 TOTALISING ...................................................................................................36  
5-2 PRESET TARE OPERATION CONDITIONS...................................................37  
5-3 QUANTITY PRESET OPERATION CONDITIONS..........................................38  
5-4 TOTALISING OPERATION CONDITIONS......................................................39  
5-5 THE CONDITION TO ALLOW THE NEXT TOTALISING OPERATION .........40  
5-6 COMBINATION KEY OPERATION MODE......................................................41  
5-7 BAUD RATE SETTING....................................................................................42  
5-8 TRANSMIT MODE SELECTION......................................................................43  
Counting  
ZSME200000003  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
EXCELL PRECISION CO., LTD.  
INSTRUCTIONS FOR USE  
1) Please keep the scale in a cool and dry place. Do not store at high temperatures.  
2) Please keep the scale clean and free from insect infestation.  
3) Avoid objects impacting with the scale.  
4) The load placed on the weigh pan must not exceed the maximum weighing capacity  
of the scale.  
5) If the scale is not going to be used for some time, please clean it and store it in a  
plastic bag in dry conditions. A desiccant sachet may be included to prevent  
moisture build up.  
6) If the scale is not going to be used for some time, the internal rechargeable battery  
should be recharged every three months. (If using dry batteries, take the dry  
batteries out before storing)  
7) Remove the plastic drip cover from the scale for best accuracy.  
PREPARING TO USE THE SCALE  
1. Locate the scale on a firm level surface free from vibrations for accurate weight  
readings.  
2. Adjust the four levelling feet to set the scale pan level using the spirit level bubble  
located at the front of the scale.  
3. Avoid operating the scale in direct sunlight or drafts of any kind.  
4. If possible avoid connecting the scale to ac power outlet sockets which are adjacent  
to other appliances to minimise the possibility of interference affecting the  
performance of the scale.  
5. Remove any weight that might be on the weigh pan before the scale is switched on  
and avoid leaving weight on the pan for long periods of time.  
6. Once the scale has been switched on, it will go through a LCD display test and then  
re-zero to be ready for use.  
7. The scale requires 15~20 minutes warm up before operation to ensure best  
accuracy.  
8. Please note when  
to be recharged.  
symbol appears on the screen, the internal battery needs  
9. All goods weighed should be placed in the centre of the weigh pan for accurate  
weighing. The overall dimensions of the goods being weighed should not exceed  
the dimension of the weigh pan.  
Counting  
ZSME200000003  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
EXCELL PRECISION CO., LTD.  
CHAPTER 1 PRODUCT INTRODUCTION  
1-1 DISPLAYS  
WEIGHT  
UNIT WEIGHT  
QUANTITY  
.
.
.
.
.
.
.
.
® 0¬  
.
.
+
3
3
3
3
3
3
T
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
stable  
Pcs  
DIGITAL DISPLAYS  
1. WEIGHT: (5 digits)  
Weight of objects on the weigh pan or totalised weight.  
2. UNIT WEIGHT: (5 digits)  
Unit weight of objects on the weigh pan or number of weighing in the totaliser.  
3. QUANTITY: (6 digits)  
Quantity (count) of objects on the weigh pan or total quantity in the totaliser.  
SYMBOL ICONS “k”  
1.  
or Net or Tare : “Tare” displays the deduction of the container weight  
T
2. à0ß or Zero  
3. + or M+  
: “ Zero” indication  
: “M+” Totaliser  
4. Stable or ~  
: “Stable” indication  
.
.
.
.
.
.
.
.
5.  
: If the piece weight is smaller than “Minimum Sampling  
Weight”, “k” will be displayed. In order to clear the  
symbol “k”, increase the size of the sample.  
.
.
6.  
: If the piece weight is smaller than “Minimum Unit Weight”,  
“k” will be displayed. The scale still weighs even though  
the piece weight is too small, this may affect the count  
accuracy.  
Pcs  
7.  
: “Low Power” warning.  
PERFORMANCE:  
High Precision Counting Scale (1/15,000 and 1/ 30,000 Display Resolution)  
Minimum Sampling Weight = at least 20d. Minimum Unit Weight = at least 0.2d  
Standard Counting Scale (1/6,000 Display Resolution)  
Minimum Sampling Weight = at least 40d. Minimum Unit Weight = at least 0.8d  
Counting  
ZSME200000003  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
EXCELL PRECISION CO., LTD.  
(d=division)  
Counting  
ZSME200000003  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
EXCELL PRECISION CO., LTD.  
1-2 KEYBOARD FUNCTION  
STANDARD TYPE  
Q’TY  
SMPL  
7 8 9  
PST  
This is a “CLEAR” key  
to delete all the High  
Limit values. Please  
refer to page 21.  
UNIT  
W.T.  
PST  
CE  
4 5 6  
1 2 3  
Z
T
M+  
MC  
.
CE  
0
ADDITIONAL FUNCTIONS TYPE I  
Dual Weighing Unit  
Q’TY  
PST  
This Key is to select  
weight units of “lb”or  
“kg”. Please refer  
to page 21.  
SMPL  
7 8 9  
UNIT  
W.T.  
lb/kg  
M+  
4 5 6  
1 2 3  
Z
.
CE  
T
MC  
0
.
.
.
.
.
.
.
.
R
7 8 9  
4 5 6  
1 2 3  
.
.
This Key is to select  
weight units in “lb”or  
“kg”. Please refer  
to page 21.  
R
lb/kg  
.
.
.
.
.
.
.
.
+
.
.
0
.
CE  
T
0
Counting  
ZSME200000003  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
EXCELL PRECISION CO., LTD.  
ADDITIONAL FUNCTIONS TYPE II  
Unit Weight Preset  
Q’TY  
PST  
UNIT U.W.  
W.T. PST  
SMPL  
7 8 9  
This key selects 10 pre-set  
stores of piece weight.  
Please refer to page 24.  
4 5 6  
Z
T
M+  
MC  
1 2 3  
.
CE  
0
.
.
.
.
.
.
.
.
.
R
R
7 8 9  
4 5 6  
1 2 3  
.
This key selects 10 pre-set  
stores of piece weight.  
Please refer to page 24.  
U.W.  
PST  
.
.
.
.
.
.
+
.
.
.
.
0
T
.
CE  
0
Counting  
ZSME200000003  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
EXCELL PRECISION CO., LTD.  
COMBINATION TYPE  
Dual Weighing Units + Preset Piece  
Weight Stores  
7 8 9  
4 5 6  
1 2 3  
Q’TY  
PST  
UNIT U.W.  
W.T. PST  
SMPL  
This is a dual function key  
which selects:  
Preset piece weight stores and  
weighing units selection.  
Please refer to page 27.  
Z
T
M+  
MC  
.
CE  
0
.
.
.
.
.
.
.
.
R
R
7 8 9  
4 5 6  
1 2 3  
.
.
This is a dual function key  
which selects:  
U.W.  
Preset piece weight stores and  
weighing units selection.  
Please refer to page 27.  
PST  
.
.
.
.
.
.
+
.
.
.
.
0
T
.
CE  
0
Counting  
ZSME200000003  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
EXCELL PRECISION CO., LTD.  
1-3 POWER SOURCES  
Applicable Power Sources  
1. AC 115V ± 10%  
2. AC 230V ± 10%  
3. 6V/1.2Ah Rechargeable battery  
4. 6V/4Ah Rechargeable battery  
5. 6V/10Ah Rechargeable battery  
6. 9V DC via mains adapter  
Power Consumption  
Approximately DC 20 mA  
Approximately DC 40 mA (With display Backlight)  
Low Power Warning  
When the  
symbol is displayed, it indicates that the scale needs to be  
recharged or the dry batteries need to be replaced.  
If the scale is not recharged after the low battery symbol is displayed, the scale will  
switch itself off after 20-30 minuets.  
4 Red light: Scale needs to be recharged.  
Green light: Scale is recharged.  
Counting  
ZSME200000003  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
EXCELL PRECISION CO., LTD.  
CHAPTER 2 OPERATION  
2-1 SWITCH SCALE ON  
To switch on the scale, ensure that the weigh pan is empty and press the ON/OFF  
switch towards the (“ | ”) position and the scale will power on and set zero ready for  
weighing or counting operations.  
4 If the scale has a RS232 option fitted, the interface card number will be displayed  
during the power up sequence.  
2-2 SWITCH SCALE OFF  
To switch the scale off, press the ON/OFF switch towards the (“ ¡ ”) position.  
2-3 DISPLAY BACKLIGHT  
AUTO BACKLIGHT  
Press  
Z
key, the unit weight displays  
followed by pressing  
5
When the weight is over 10 divisions or any key is pressed, the display backlight  
will be switched on. When the weight returns to zero or the weight on platform is  
less than 10 divisions, the display backlight will switch off after 5 seconds.  
BACKLIGHT ON  
Press  
Z
key, the unit weight displays  
followed by pressing  
followed be pressing  
4
Backlight is on all the time.  
BACKLIGHT OFF  
Press  
Z
key, the unit weight displays  
6
Backlight is off.  
4 The backlight mode is stored in memory and will restored when the scale is  
switched off and back on again.  
Counting  
ZSME200000003  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EXCELL PRECISION CO., LTD.  
2-4 SAMPLING SPEED & BACK TO ZERO SETTING  
Sampling speed: 01 ~ 15 (01 = slow, 15 = Very fast)  
The slower the sampling speed the more accurate the count will be.  
The faster the sampling speed the less accurate the count may be.  
Zero display mask:  
The standard auto zero tracking facility will normally ensure that the  
zero remains stable despite fluctuations in temperature or ac mains  
voltage etc. However in exceptional circumstances particularly mist  
conditions & other unstable environments a useful additional facility  
is available.  
With the zero display mask it is possible to configure the scale not to  
show the first division of the weight. When configured the weight  
display will show zero as long as the weight is less than two display  
divisions.  
1= 1st division is displayed as zero  
0= normal mode (1st division is displayed)  
Press  
Z
key, the unit weight displays  
followed be pressing  
8
Weight Unit Weight  
Quantity  
X X  
Sampling speed  
Press 8 to increment (up) or 2  
To decrement (down) the sampling speed  
Zero display mask:  
Press 4 to select 0 (normal mode) or  
6 to select 1 (1st division is displayed as zero)  
Press Q’TY PST to exit and save the settings.  
Counting  
ZSME200000003  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EXCELL PRECISION CO., LTD.  
2-5 AUTO CALIBRATION  
Œ When the scale is at zero, press and hold . followed by pressing U.W.  
PST  
until the weight display shows the scale capacity flashing, then release  
the keys.  
3
® 0¬  
.
.
3
Stable  
Value of full capacity of the scale  
• Place weights on the scale equivalent to full load capacity. When the scale  
is stable, it will calibrate automatically. While the scale is counting back to  
zero, remove all the weights from the scale. The Calibration procedure is  
finished.  
4 If full load is not available in weights it is possible to enter a weight value of less  
than full load. Enter the weight value to be used and then place the weight on  
the scale, when the reading is stable the scale will automatically calibrate.  
While the scale is counting back to zero, remove all the weights from the scale.  
The Calibration procedure is finished. The new calibration will be stored and  
recalled when the scale is switched off and on again.  
Press CE key to exit from the calibration mode.  
4 Restore to the default setting: When the Auto calibration is miss-operated, and  
the scale should be restored to the default setting, please hold CE key and  
press U.W. PST key, the default setting will be restored after the scale counting  
back to zero.  
2-6 ZERO FUNCTION  
Press the  
Z
key to re-zero the display with no load on the weigh pan. When the zero  
is set correctly the “k” icon will be displayed adjacent to the (à0ß ) symbol on the  
weight display.  
The zero setting range is ± 2% of the capacity of the scale.  
Counting  
ZSME200000003  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EXCELL PRECISION CO., LTD.  
2-7 UNIT WEIGHT CALIBRATION  
¨
Two methods of unit weight calibration are available depending on the scale  
configuration they are either:-  
1. Auto Calibration Þ if weight is over 10% of the last sampling value, the scale  
will automatically re-calculate the unit weight.  
Example:  
Say the current unit weight is 2.5g. If the next batch of product of the same  
type has a slightly different unit weight say 2.8g, then because the difference  
between the to unit weights is greater than 10% the scale will average the two  
values and set a new unit weight of 2.65g. If the difference in unit weights are  
less than 10% then the unit weight is not re-calculated.  
2. Manual Calibration Þ Press SMPL key to determine the unit weight.  
¨
The Auto Unit Weight calibration is setting is a factory set option. If it is set to off  
then the auto unit weight calculation is disabled.  
Counting  
ZSME200000003  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EXCELL PRECISION CO., LTD.  
2-8 COUNTING  
The piece weight of the items to be weighed must be established before counting  
operations are possible.  
2-8-1 The Unit Weight of Object is Unknown  
Œ Place a sample quantity of items on the scale  
.
Sampling Weight  
• Enter the number of items in the sample  
.
ï
Sampling Weight  
Number Entered  
4 The quantity display will flash for about 3 seconds, whilst it is flashing press the  
key to complete the sampling routine. Otherwise, the number entered and  
SMPL  
displayed by the unit weight display will be used as the piece weight when the  
display stops flashing.  
key.  
When the quantity display is flashing, press the SMPL  
.
Sampling Weight  
• Once the scale stabilizes, the count is shown on the quantity display.  
.
.
3
Stable  
Sampling Weight  
Unit Weight  
Sampling Quantity entered  
2-8-2 The Unit Weight of Object is Known  
Œ Enter the known weight of the item  
3
® 0¬  
ï
.
.
3
Stable  
Unit Weight  
Counting  
ZSME200000003  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EXCELL PRECISION CO., LTD.  
• Press the UNIT W.T. key, the count is shown on the quantity display.  
3
® 0¬  
.
.
3
Stable  
Unit Weight  
¨
¨
The larger the sample weight is, the more accurate the count will be.  
With both the “Unit weight” and “Quantity” displays showing zero, pressing either  
the UNIT W.T. key or the SMPL key will recall the latest piece weight value.  
2-9 DEDUCTION OF CONTAINER WEIGHT  
2-9-1 The Weight of Container is Unknown ( Tare )  
Œ Place the container onto the scale.  
.
Container Weight  
• Press  
T
Key.  
Once the scale stabilizes, it will display the net weight and the “k” icon next to  
the NET symbol will be displayed.  
3
3
® 0¬  
.
T
3
Stable  
2-9-2 Clear Tare Value  
When the container is removed from the scale, the weight display will show a  
negative sign. Press the key again to clear tare value and the weight  
display will reset to zero, the “k” icon adjacent to the NET symbol will go off.  
T
Counting  
ZSME200000003  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EXCELL PRECISION CO., LTD.  
2-9-3 The Weight Container is Known (Pre-set Tare)  
The User mode function to operate the “Pre-set tare” is to set “0” Þ The scale can  
not perform a pre-set tare when there is a weight on the scale.  
Œ Nothing is placed on the scale.  
3
® 0¬  
.
3
3
3
Stable  
• Press  
T
key.  
3
® 0¬  
.
Stable  
Stable  
Enter the weight value of the container.  
3
® 0¬  
.
Weight entered  
• Press  
T
key.  
.
3
3
T
Stable  
The User mode function to operate the “Pre-set tare” is to set “1” Þ The scale can  
perform a pre-set tare when there is a weight on the scale.  
Œ An object is placed on the scale.  
.
.
3
3
3
Stable  
Object Weight  
Unit Weight  
Object Quantity  
• Enter the weight value of the container  
.
.
ï
Stable  
Weight Entered  
Press  
T
key.  
.
.
T
3
Stable  
Net weight deducting container  
Unit Weight  
Deducted container Q’ty  
Counting  
ZSME200000003  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EXCELL PRECISION CO., LTD.  
2-9-4 Clear The Pretare Value  
When the container is removed from the scale, the weight display will show a  
negative sign. Press the  
T
key to clear pre-tare value and the weight display  
will reset to zero, the “k” icon adjacent to the NET symbol will go off.  
Counting  
ZSME200000003  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EXCELL PRECISION CO., LTD.  
2-10 TOTALISING  
4 The totalising function can be used up to a maximum of 99 times before it must be  
reset. The totalising display is limited to six digits maximum.  
2-10-1 Quantity totalising  
Œ Place a desired object onto the scale  
.
.
Object Weight  
Unit Weight  
Object Q’ty Placed on Scale  
• Press M+ Key  
Once the scale is stable.  
M+ 3  
.
3
Stable  
Total Weight Totalised  
Total Number of Additions  
Total Quantity Totalised  
• After 3 seconds, the scale will return to the counting mode.  
M+ 3  
.
.
3
Stable  
Object Weight  
Unit Weight  
Object Q’ty Placed on Scale  
Counting  
ZSME200000003  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EXCELL PRECISION CO., LTD.  
2-10-2 Recall Quantity Totalised  
With both the weight and the unit weight displaying zero, press M+ key to recall the  
totalised value.  
3
M+ 3  
® 0¬  
.
3
Stable  
Total Weight Totalised  
Total Number of additions  
Total Quantity Totalised  
2-10-3 Weight Totalising  
Œ With the unit weight display showing zero, place an object onto the scale.  
.
Object Weight  
• Press M+ key.  
Once the scale has stabilized.  
M+ 3  
.
3
Stable  
Total Weight totalised  
Total Number of additions  
• After 3 seconds, the scale will return to the weighing mode.  
M+ 3  
.
3
Stable  
Object Weight  
2-10-4 Recall Weight Total  
With both the weight and the unit weight displays showing zero, press M+ key to  
recall the totalised values.  
3
M+ 3  
® 0¬  
.
3
Stable  
Total Weight Totalised  
Total Number of Additions  
Counting  
ZSME200000003  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EXCELL PRECISION CO., LTD.  
2-10-5 Clear all Totalised Values  
Press the MC key to clear all of the totalised values and the “k” symbol adjacent to  
the M+ icon on the overlay will switch off. The totals for weight, number of additions  
and quantity are all cleared back to zero.  
NOTE: All totals will be lost if the scale is switched off.  
Counting  
ZSME200000003  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EXCELL PRECISION CO., LTD.  
CHAPTER 3 USER INTERFACE SETTING  
3-1 M+ KEY ACTION  
Press Z then 1 twice.  
Weight  
Unit Weight  
Quantity  
X
Press 0 , 1 or 2 to select the required mode  
0 = When M+ key is pressed, the display will show the totalised value. Then, the  
scale will count back to zero after 3 seconds.  
1 = When M+ key is pressed, the display will show the totalised value. Then, the  
scale will count back to zero when the CE key is pressed.  
2 = When M+ key is pressed, the beeper only will sound and the display won’t  
show the totalised value.  
To exit and save the entry, press the • key  
3-2 PRE-SET TARE  
Press Z then 1 followed by 2  
Weight  
Unit Weight  
Quantity  
X
Press 0 or 1 to select the required mode  
0 = Pre-set Tare function is not available when there is an object on the scale.  
1 = Pre-set Tare function is available when there is an object on the scale.  
To exit and save the entry, press the • key  
Counting  
ZSME200000003  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EXCELL PRECISION CO., LTD.  
3-3 PRE-SET QUANTITY CONDITIONS  
Press Z then 1 followed by 3  
Weight  
Unit Weight  
Quantity  
X
.
Press 0 or 1 to select the required mode  
0 = The quantity will be accepted by the scale only when the weight is stable.  
1 = The quantity will be accepted by the scale even if the weight is un-stable.  
To exit and save the entry, press the • key  
3-4 M+ OPERATION  
Press Z then 1 followed by 4  
Weight  
Unit Weight  
Quantity  
X
Press 0 or 1 to select the required mode  
0 = M+ will be operate when the weight is stable.  
1 = M+ will be operate even when the weight is un-stable.  
To exit and save the entry, press the • key  
Counting  
ZSME200000003  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EXCELL PRECISION CO., LTD.  
3-5 M+ CONTINUOUS OPERATION (Only After  
Return to Zero)  
Press Z then 1 followed by 5  
Weight  
Unit Weight  
Quantity  
X
Press 0 or 1 to select the required mode  
0 = After M+ operation, next M+ operation is allowed only after the scale Returns to  
Zero.  
1 = After M+ operation, next M+ operation is allowed immediately, without the scale  
Returning to Zero.  
To exit and save the entry, press the • key  
3-6 MULTIPLE UAGE KEY U.W.PST / (kg/lb)  
FUNCTION SELECTION  
Press Z then 1 followed by 6  
Weight  
Unit Weight  
Quantity  
X
Press 0 or 1 to select the required mode  
0 = Momentary press of “the key” operates the weighing units. (Major function)  
Press and hold “the key” for 3 seconds operates the U.W.PST function. (Minor  
function)  
1 = Momentary press of “the key” operates the U.W.PST function. (Major function)  
Press and hold “the key” 3 sec. is dual units selection. (Minus function)  
To exit and save the entry, press the • key  
Note: The nature of the operation of this function will depend on the configuration of  
Counting  
ZSME200000003  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EXCELL PRECISION CO., LTD.  
the scale.  
Counting  
ZSME200000003  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EXCELL PRECISION CO., LTD.  
3-7 BAUD RATE SETTING (for only with the serial  
interface)  
Press Z then 1 followed by 7  
Weight  
Unit Weight  
Quantity  
X
Press 0 ~ 3 to select the required baud  
0 = 1200  
1 = 2400  
2 = 4800  
3 = 9600  
To exit and save the entry, press the • key  
Transmit mode:  
Press Z then 1 followed by 8  
Weight  
Unit Weight  
Quantity  
X
Press 0 ~ 3 to select the required mode  
0 = Press M+ to transmit  
1 = Continuous transmission  
2 = Transmit only when weight is stable  
3 = For EZ-2 printer  
To exit and save the entry, press the • key  
Counting  
ZSME200000003  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EXCELL PRECISION CO., LTD.  
CHAPTER 4 KEYBOARD TYPES  
4-1 STANDARD TYPE  
4-1-1 Quantity Preset  
The scale can store a Hi Limit quantity value. The scale will make a warning beep  
and the unit weight window will display a blinking  
over the Hi limit alarm value set.  
.
if the quantity is  
Set the Hi Limit alarm value for Quantity Preset  
Method 1 :  
Place the sample object onto the weigh pan and increase the number of  
items gradually until the quantity reaches the desired Hi Limit alarm level.  
Press Q’TY PST key to store this “quantity preset” alarm value.  
Method 2 :  
Enter directly the Hi Limit quantity number using the keypad, then press  
the Q’TY PST key to store the value.  
Clear the Hi Limit quantity value  
To clear Hi Limit quantity value, press the PST CE key.  
Counting  
ZSME200000003  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EXCELL PRECISION CO., LTD.  
4-2 TYPE I DUAL WEIGHING UNIT  
4-2-1 Unit Selection  
Press lb / kg key to select the weighing units required “lb” or “kg”.  
¨
The scale will save the current units when it is switched off and restore them  
when switched back on again.  
4-2-2 Quantity Preset  
The scale can store a Hi Limit quantity value. The scale will make a warning beep  
and the unit weight window will display a blinking  
over the Hi limit alarm value set.  
.
if the quantity is  
Set the Hi Limit value for Quantity Preset  
Œ Press Q’TY PST key whether the scale has object on the weigh pan or not.  
3
® 0¬  
3
Stable  
Latest Preset Value  
• Enter a desired Hi Limit value. Use CE key to correct the value entered.  
3
® 0¬  
3
Stable  
Hi Limit Value Entered  
Press SMPL key. Use CE key to correct the value entered.  
3
® 0¬  
3
Stable  
• Press Q’TY PST key and the scale will return to counting mode.  
3
® 0¬  
.
3
Stable  
Counting  
ZSME200000003  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EXCELL PRECISION CO., LTD.  
4-2-3 Weight Preset  
The scale can store a Hi Limit unit weight value. The scale will make a warning  
beep and the unit weight window will display a blinking  
if the unit weight is over the Hi limit value stored.  
Set the Hi Limit value for unit Weight  
Œ Press Q’TY PST key whether the scale has object on the weigh pan or not.  
3
® 0¬  
3
Stable  
Latest Preset Value  
• Enter a desired Hi Limit value. Use CE key to correct the value entered.  
3
® 0¬  
3
Stable  
Hi Limit Value Entered  
4
The unit and the decimal points for the high limit value entered are the same as the value  
previously preset on the weight display.  
Press UNIT W.T. key. Use CE key to correct the value entered.  
3
® 0¬  
3
Stable  
• Press Q’TY PST key, the scale will return to counting mode.  
3
® 0¬  
.
3
Stable  
Clear the Hi Limit unit weight and quantity values  
To clear the Hi Limit unit weight or Quantity preset enter “0” as the value in the  
appropriate entry field.  
Counting  
ZSME200000003  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EXCELL PRECISION CO., LTD.  
4-3 TYPE II UNIT WEIGHT PRESET  
4-3-1 Unit Weight Preset Stores  
The scale can store 10 sets of unit weight presets. The stores are accessed  
using the number keys (  
0
~
9
). Press the number key required and the  
display will show the unit weight previously saved in that store.  
Set Unit Weight Preset  
Œ Use the number  
0
~
9
to enter the unit weight value.  
3
® 0¬  
® 0¬  
® 0¬  
® 0¬  
.
3
3
3
Stable  
Stable  
Stable  
• Press U.W. PST key.  
3
Press U.W. PST key.  
3
• Press any number  
0
~
9
key to save the unit weight in its store.  
3
.
3
Stable  
Recall the Unit Weight Preset  
Œ Press U.W. PST key.  
3
® 0¬  
3
Stable  
• Press any number  
0
~
9
key to recall the unit weight saved in its store.  
3
® 0¬  
.
3
Stable  
Counting  
ZSME200000003  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EXCELL PRECISION CO., LTD.  
4-3-2 Quantity Preset  
The scale can store a Hi Limit quantity value. The scale will make a warning beep  
and the unit weight window will display a blinking  
over the Hi limit alarm value set.  
.
if the quantity is  
Hi Limit Value for Quantity Preset  
Œ Press Q’TY PST key whether the scale has object on the weigh pan or not.  
3
® 0¬  
3
Stable  
Latest Preset Value  
• Enter a desired Hi Limit value. Use CE key to correct the value entered.  
3
® 0¬  
3
Stable  
Hi Limit Value Entered  
Press SMPL key. Use CE key to correct the value entered.  
3
® 0¬  
3
Stable  
• Press Q’TY PST key, the scale will return to counting mode.  
3
® 0¬  
.
3
Stable  
Counting  
ZSME200000003  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EXCELL PRECISION CO., LTD.  
4-3-3 Weight Preset  
The scale can store a Hi Limit unit weight value. The scale will make a warning  
beep and the unit weight window will display a blinking  
if the unit weight is over the Hi limit value stored.  
Set the Hi Limit value for unit Weight  
Œ Press Q’TY PST key whether the scale has object on the weigh pan or not.  
3
® 0¬  
3
Stable  
Latest Preset Value  
• Enter a desired Hi Limit value. Use CE key to correct the value entered.  
3
® 0¬  
3
Stable  
Hi Limit Value Entered  
4
The unit and the decimal points for the high limit value entered are the same as the value  
previously preset on the weight display.  
Press UNIT W.T. key. Use CE to correct the value entered.  
3
® 0¬  
3
Stable  
• Press Q’TY PST key, the scale will return to counting mode.  
3
® 0¬  
.
3
Stable  
Clear the Hi Limit unit weight and quantity values  
To clear the Hi Limit unit weight or Quantity preset enter “0” as the value in the  
appropriate entry field.  
Counting  
ZSME200000003  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EXCELL PRECISION CO., LTD.  
4-4 COMBINATION TYPE DUAL WEIGHING UNIT +  
UNIT WEIGHT PRESET  
Q’TY  
PST  
SMPL  
7 8 9  
The combination key  
has two functions:  
UNIT  
W.T.  
U.W.  
PST  
4 5 6  
1 2 3  
Unit Weight and Unit Selection,  
please refer to INTERFACE  
section 6 below.  
Z
T
M+  
MC  
CE  
0 .  
.
.
.
.
.
.
.
.
R
R
.
.
7 8 9  
4 5 6  
1 2 3  
The combination key  
has two functions:  
U.W.  
PST  
Unit Weight and Unit Selection,  
please refer to INTERFACE  
section 6 below.  
.
.
.
.
.
.
.
.
0
+
.
.
T
CE  
0 .  
4-4-1 Unit Selection  
Œ Press the combination key.  
(If the unit selection setting is a secondary function, press the combination key  
for about 3 seconds and the display will show the following)  
3
® 0¬  
3
Stable  
Use the number  
1
or  
2
key to select 1 or  
2
¨
¨
Remarks : 1 Þ First unit  
2 Þ Second unit  
The scale will save the current unit in use. At power on the last units in use  
will be used.  
Counting  
ZSME200000003  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EXCELL PRECISION CO., LTD.  
4-4-2 Unit Weight Preset Stores  
The scale can store 10 sets of unit weight presets. The stores are accessed  
using the number keys (  
0
~
9
). Press the number key required and the  
display will show the unit weight previously saved in that store.  
Set Unit Weight Preset  
Œ Use the number  
0
~
9
key to enter the unit weight value.  
3
® 0¬  
.
3
Stable  
• Press the combination key.  
(If the unit weight preset setting is a secondary function, press the combination  
key for about 3 seconds and the display will show the following)  
3
® 0¬  
3
Stable  
Press the combination key.  
(If the unit weight preset setting is a secondary function, press the combination  
key for about 3 seconds and the display will show the following)  
3
® 0¬  
3
Stable  
• Press any number  
0
~
9
key to recall the unit weight saved in this key.  
3
® 0¬  
.
3
Stable  
Recall the Unit Weight Preset  
Œ Press the combination key.  
(If the unit weight preset setting is a secondary function, press the combination  
key for about 3 seconds and the display will show the following)  
3
® 0¬  
3
Stable  
• Press the number  
0
~
9
key to recall the unit weight saved in this key.  
3
® 0¬  
.
3
Stable  
Counting  
ZSME200000003  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EXCELL PRECISION CO., LTD.  
4-4-3 Quantity Preset  
The scale can store a Hi Limit quantity value. The scale will make a warning beep  
and the unit weight window will display a blinking  
over the Hi limit alarm value set.  
.
if the quantity is  
Set the Hi Limit Value for Quantity Preset  
Œ Press Q’TY PST key whether the scale has object on the weigh pan or not.  
3
® 0¬  
3
Stable  
Latest Preset Value  
• Enter a desired Hi Limit value. Use CE key to correct the value entered.  
3
® 0¬  
3
Stable  
Hi Limit Value Entered  
Press SMPL key. Use CE key to correct the value entered.  
3
® 0¬  
3
Stable  
• Press Q’TY PST key, the scale will return to counting mode.  
3
® 0¬  
.
3
Stable  
Counting  
ZSME200000003  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EXCELL PRECISION CO., LTD.  
4-4-4 Weight Preset  
The scale can store a Hi Limit unit weight value. The scale will make a warning  
beep and the unit weight window will display a blinking  
if the unit weight is over the Hi limit value stored.  
Set the Hi Limit value for unit Weight  
Œ Press Q’TY PST key whether the scale has object on the weigh pan or not.  
3
® 0¬  
3
Stable  
Latest Preset Value  
• Enter a desired Hi Limit value. Use CE key to correct the value entered.  
3
® 0¬  
3
Stable  
Hi Limit Value Entered  
4
The unit and the decimal points for the high limit value entered are the same as the value  
previously preset on the weight display.  
Press UNIT W.T. key. Use CE key to correct the value entered.  
3
® 0¬  
3
Stable  
• Press Q’TY PST key, the scale will return to counting mode.  
3
® 0¬  
.
3
Stable  
Clear the Hi Limit unit weight and quantity values  
To clear the Hi Limit unit weight or Quantity preset enter “0” as the value in the  
appropriate entry field.  
Counting  
ZSME200000003  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EXCELL PRECISION CO., LTD.  
CHAPTER 5 INTERFACE  
4 Function available for RS232 or PRINTER output, please refer to section 7 and 8  
below.  
5-1 TOTALISING  
Œ Press the  
Z
key until the unit weight displays  
followed by  
pressing key  
1
WEIGHT  
UNIT WEIGHT  
QUANTITY  
- - - - -  
- - - - - -  
WEIGHT  
UNIT WEIGHT  
QUANTITY  
• Press the  
1
key.  
WEIGHT  
UNIT WEIGHT  
QUANTITY  
X
Use the number 0 ,  
1
or  
2
key to select 0, 1, or 2  
0 Þ Press M+ key and the window display will show the totalised value.  
After 3 seconds, the scale will return to counting mode.  
1 Þ Press M+ key and the window display will show the totalised value.  
Press CE key and the scale will return to counting mode.  
2 Þ Press M+ key and the display window will not show the totalised  
value as the buzzer will beep.  
Press the . key to exit the setting mode and the scale will return to counting mode.  
Counting  
ZSME200000003  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EXCELL PRECISION CO., LTD.  
5-2 PRESET TARE OPERATION CONDITIONS  
Œ Press the  
Z
key until the unit weight displays  
then press  
QUANTITY  
1
WEIGHT  
UNIT WEIGHT  
- - - - -  
- - - - - -  
WEIGHT  
UNIT WEIGHT  
QUANTITY  
• Press the  
2
key.  
WEIGHT  
UNIT WEIGHT  
QUANTITY  
X
Use the number keys  
0
or  
1
key to select 0 or 1  
0 Þ  
Preset tare is not allowed if there is a weight on the scale.  
1 Þ Preset tare will operate at any point throughout the weighing range.  
Press the . key to exit the setting mode and the scale will return to counting mode.  
Counting  
ZSME200000003  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EXCELL PRECISION CO., LTD.  
5-3 QUANTITY PRESET OPERATION CONDITIONS  
Œ Press the  
Z
key until the unit weight displays  
then press  
QUANTITY  
1
WEIGHT  
UNIT WEIGHT  
- - - - -  
- - - - - -  
WEIGHT  
UNIT WEIGHT  
QUANTITY  
• Press the  
3
key.  
WEIGHT  
UNIT WEIGHT  
QUANTITY  
X
.
Use the number keys  
0
or  
1
to select 0 or 1  
0 Þ The “Q’TY PST” will only operate when the weight is stable.  
1 Þ The “Q’TY PST” will operate irrespective of the stability of the weight.  
Press the . key to exit the setting mode and the scale will return to counting mode.  
Counting  
ZSME200000003  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EXCELL PRECISION CO., LTD.  
5-4 TOTALISING OPERATION CONDITIONS  
Œ Press the  
Z
key until the unit weight displays  
then press  
QUANTITY  
1
WEIGHT  
UNIT WEIGHT  
- - - - -  
- - - - - -  
WEIGHT  
UNIT WEIGHT  
QUANTITY  
• Press the  
4
key.  
WEIGHT  
UNIT WEIGHT  
QUANTITY  
X
Use the number keys  
0
or  
1
to select 0 or 1  
0 Þ Totalising will only be carried out when the weight is stable.  
1 Þ Totalising will be carried out irrespective of the stability of the weight.  
Press the . key to exit the setting mode and the scale will return to counting mode.  
Counting  
ZSME200000003  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EXCELL PRECISION CO., LTD.  
5-5 THE CONDITION TO ALLOW THE NEXT  
TOTALISING OPERATION  
Œ Press the  
Z
key until the unit weight displays  
then press  
QUANTITY  
1
WEIGHT  
UNIT WEIGHT  
- - - - -  
- - - - - -  
WEIGHT  
UNIT WEIGHT  
QUANTITY  
• Press the  
5
key.  
WEIGHT  
UNIT WEIGHT  
QUANTITY  
X
Use the number keys  
0
or  
1
to select 0 or 1  
0 Þ The weight needs to return to zero before the next totalising operation is  
allowed.  
1 Þ Allow next totalising operation without return to zero interlock.  
Press the . key to exit the setting mode and the scale will return to counting mode.  
Counting  
ZSME200000003  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EXCELL PRECISION CO., LTD.  
5-6 COMBINATION KEY OPERATION MODE  
Œ Press the  
Z
key until the unit weight displays  
then press  
QUANTITY  
1
WEIGHT  
UNIT WEIGHT  
- - - - -  
- - - - - -  
WEIGHT  
UNIT WEIGHT  
QUANTITY  
• Press the  
6
key  
WEIGHT  
UNIT WEIGHT  
QUANTITY  
X
Use the number keys  
0
or  
1
to select 0 or 1  
0 Þ Press the “Unit Selection” function key (main function) and hold it down for 3  
seconds, the function of the key becomes “Unit Weight Selection” (secondary  
function)  
1 Þ Press the “Unit Weight Preset” function key (main function) and hold it down  
for 3 seconds, the unit selection function becomes the secondary function.  
Press the . key to exit the setting mode and the scale will return to counting mode.  
Counting  
ZSME200000003  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EXCELL PRECISION CO., LTD.  
5-7 BAUD RATE SETTING  
Œ Press the  
Z
key until the unit weight displays  
then press  
QUANTITY  
1
WEIGHT  
UNIT WEIGHT  
- - - - -  
- - - - - -  
WEIGHT  
UNIT WEIGHT  
QUANTITY  
• Press the  
7
key.  
WEIGHT  
UNIT WEIGHT  
QUANTITY  
X
Use number keys  
0
to  
3
key to select  
0 Þ 1200  
1 Þ 2400  
2 Þ 4800  
3 Þ 9600  
Once the setting is done, re-start the scale by turning the power off / on.  
Press the . key to exit the setting mode and the scale will return to counting mode.  
Counting  
ZSME200000003  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EXCELL PRECISION CO., LTD.  
5-8 TRANSMIT MODE SELECTION  
Œ Press the  
Z
key until the unit weight displays  
then press  
QUANTITY  
1
WEIGHT  
UNIT WEIGHT  
- - - - -  
- - - - - -  
WEIGHT  
UNIT WEIGHT  
QUANTITY  
• Press the  
8
key.  
WEIGHT  
UNIT WEIGHT  
QUANTITY  
X
Use the number keys  
0
to  
3
to select  
0 Þ Press M+ key to transmit  
1 Þ Stream transmit  
2 Þ Stable transmit  
3 Þ EZ-2 printer only  
Once the setting is done, re-start the scale by turning the power off / on.  
Press the . key to exit the setting mode and the scale will return to counting mode.  
4 The weight must be greater than a positive value to transmit the record  
information.  
4 Transmit mode data:  
Press M+ key to transmit  
Stream transmit / Stable transmit  
NO.  
N/W  
U/W  
PCS  
N/W  
U/W  
PCS  
Press MC key to transmit ( clear the totalised data from memory )  
===========  
T/N  
T/W  
T/A  
Counting  
ZSME200000003  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EXCELL PRECISION CO., LTD.  
NO. No. of totalising operations  
N/W Net Weight  
U/W Unit Weight  
PCS Piece  
T/N Total no. of totalising operations  
T/W Total Weight  
T/A Total Amount  
Counting  
ZSME200000003  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Elation Professional Vacuum Cleaner PZ 720A User Manual
Everpure Water Dispenser RT 9 User Manual
Fisher Price Motorized Toy Car 76980 User Manual
Fisher Price Motorized Toy Car T0787 User Manual
Fluke Thermometer 1504 User Manual
Garmin All in One Printer PRO 4900 User Manual
Gateway DVD Recorder AR 230 User Manual
GE Dishwasher GFWH2400 User Manual
Gefen Switch EXT DVI 16416 User Manual
GE Monogram Refrigerator ZISS360NXSS User Manual