USER’S MANUAL
FX4 MOTORIZED TREADMILL
MODEL NUMBER: FX4M
USER WEIGHT LIMITATION: 350lbs.
TOLL FREE CUSTOMER SERVICE NUMBER: 1.888.800.1167
SERIAL NUMBER (found on frame):
Download from Www.Somanuals.com. All Manuals Search And Download.
3
FX4M MOTORIZED TREADMILL
POWER REQUIREMENTS
Power Requirements:
IMPROPER CONNECTION OF THE EQUIPMENT GROUNDING CONNECTOR CAN RESULT IN A RISK OF AN
ELECTRIC SHOCK. CHECK WITH A QUALIFIED ELECTRICIAN OR SERVICE MAN IF YOU ARE IN DOUBT AS TO
WHETHER THE PRODUCT IS PROPERLY GROUNDED. DO NOT MODIFY THE PLUG PROVIDED WITH THE
PRODUCT, IF IT WILL NOT FIT THE OUTLET; HAVE A PROPER OUTLET INSTALLED BY A QUALIFIED ELECTRICIAN.
This treadmill can be seriously damaged by sudden voltage changes in your home’s electrical power. Voltage spikes, surges
and noise interference can result from weather conditions or from other appliances being turned on or off. To reduce the
possibility of treadmill damage, always use a surge protector (not included) with your treadmill.
Surge protectors can be purchased at most hardware stores. The manufacturer recommends a single outlet surge protector
with a UL 1449 rating as a Transient Voltage Surge Suppressor (TVSS) with a UL suppressed voltage rating of 400V or less
and an electrical rating 120VAC, 15 amps.
This treadmill must be grounded to reduce the risk of electrical shock. Grounding provides a path of least resistance for
electric current, should the treadmill malfunction. This treadmill comes with an electrical cord having an equipment-grounding
conductor and a grounding plug. Always plug the power cord into a surge protector, and plug the surge protector into an
appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
This product is for use on a nominal 120-volt circuit, and has a grounding plug that looks like the plug illustrated in the
drawing below.
Visit us at: www.evofitness.com
Download from Www.Somanuals.com. All Manuals Search And Download.
4
FX4M MOTORIZED TREADMILL
PREASSEMBLY
Open the boxes:
You are now ready to open the boxes of your new equipment. Make sure to inventory all of the parts that are included in the
boxes. Check the Hardware Comparison Chart for a full count of the number of parts included for this product to be
assembled properly. If you are missing any parts or have any assembly questions call your local Smooth Retailer.
Gather your tools:
Before starting the assembly of your unit, make sure that you have gathered all the necessary tools you may require to
assemble the unit properly. Having all of the necessary equipment at hand will save time and make the assembly quick and
hassle-free.
Clear your work area:
Make sure that you have cleared away a large enough space to properly assemble the unit. Make sure the space is free
from anything that may cause injury during assembly. After the unit is fully assembled, make sure there is a comfortable
amount of free area around the unit for unobstructed operation.
Invite a friend:
Some of the assembly steps may require heavy lifting. It is recommended that you obtain the assistance of another person
when assembling this product.
User Weight Limitation:
Please note that there is a weight limitation for this product. If you weigh more than 350lbs. it is not recommended that
you use this product. Serious injury may occur if the user’s weight exceeds the limit shown here. This product is not
intended to support users whose weight exceeds this limit.
Visit us at: www.evofitness.com
Download from Www.Somanuals.com. All Manuals Search And Download.
5
FX4M MOTORIZED TREADMILL
HARDWARE COMPARISON CHART
Hardware chart:
For your convenience, we have identified the hardware used in the assembly of this product. This chart is provided to help
you identify those items that may be unfamiliar to you.
NO. DESCRIPTION
QTY.
Safety Key
2
1
2
4
4
4
2
2
2
4
2
1
1
1
1
4
M6 x 15mm Console Screw
#8 x 15mm Screw
#4 x 19mm Screw
M8 x 19mm Screw
M8 x 78mm Bolt
Metal Cap
11
12
18
19
20
26
27
34
A
Plastic Cap
M8 x 15mm Screw
M6 x 20mm Screw
Wrench
B
Allen Wrench
Wrench
C
D
Wrench
MILLIMETERS
Visit us at: www.evofitness.com
Download from Www.Somanuals.com. All Manuals Search And Download.
6
FX4M MOTORIZED TREADMILL
PARTS LIST
No. Description
Qty. Order No.
No. Description
Base Frame End Cap –
Qty. Order No.
1
Computer
1
1
1
2
1
1
1
1
1
1
34
9
2
2
1
1
13
4
2
2
1
1
4
2
2
2
4
2
1
FX4M-01
FX4M-02
FX4M-03
FX4M-04
FX4M-05
FX4M-06
FX4M-07
FX4M-08
FX4M-09
FX4M-10
FX4M-11
FX4M-12
FX4M-13
FX4M-14
FX4M-15
FX4M-16
FX4M-17
FX4M-18
FX4M-19
FX4M-20
FX4M-21
FX4M-22
FX4M-23
FX4M-24
FX4M-25
FX4M-26
FX4M-27
FX4M-28
FX4M-29
30
1
1
1
1
2
2
2
3
4
1
2
4
6
2
2
2
1
2
1
1
2
1
1
1
1
1
1
1
1
FX4M-30
FX4M-31
FX4M-32
FX4M-33
FX4M-34
FX4M-35
FX4M-36
FX4M-37
FX4M-38
FX4M-39
FX4M-40
FX4M-41
FX4M-42
FX4M-43
FX4M-44
FX4M-45
FX4M-46
FX4M-47
FX4M-48
FX4M-49
FX4M-50
FX4M-51
FX4M-52
FX4M-53
FX4M-54
FX4M-55
FX4M-56
FX4M-57
FX4M-58
Left 1
Base Frame End Cap –
2
Safety Key
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
Left 2
Base Frame End Cap –
3
Computer Support
M6 x 15mm Console Screw
Plastic Ring
Base Frame End Cap –
Right 2
4
5
M6 x 20mm Screw
6
M5 x 10mm Screw
Handle Cover – Left #1
Handle Cover – Left #2
Handle Cover – Right #2
Handle Cover – Right #1
#8 x 15mm Screw
#4 x 19mm Screw
Hand Pulse Sensor
End Cap
Base Frame End Cap
M14 x 54MM Screw
M10 x Nylon Nut
Topple Bolt
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
B# 8 x 43MM Screw
M14 Nut
Cushion
Bushing
Caster Bracket
Lock Washer
Wheel Shaft
Base Frame
Caster
Left Handlebar
Right Handlebar
M8 x 25mm Screw
M8 x 19mm Screw
M8 x 78mm Bolt
Metal Cap
Cross Tube
Screw
Left Handle Upright
Right Handlebar Upright
M5 x 8mm Screw
M6 x 55mm Screw
6 x 13mm Washer
Plastic Cap
M8 x Nylon Nut
Foot Up Lock
16 x 8mm Washer
Spring
Motor Hood - Top
Left Side Strip
Right Side Strip
Running Belt
Rear End Cap
M8 x 15mm Screw
M5 x 8mm Screw
Power Switch
Visit us at: www.evofitness.com
Download from Www.Somanuals.com. All Manuals Search And Download.
7
FX4M MOTORIZED TREADMILL
PARTS LIST
No. Description
M10 x 35mm Screw
Qty. Order No.
No. Description
Qty. Order No.
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
1
1
2
2
1
1
1
1
1
1
1
2
1
1
2
2
1
1
1
1
1
1
2
1
1
8
2
2
1
1
FX4M-59
FX4M-60
FX4M-61
FX4M-62
FX4M-63
FX4M-64
FX4M-65
FX4M-66
FX4M-67
FX4M-68
FX4M-69
FX4M-70
FX4M-71
FX4M-72
FX4M-73
FX4M-74
FX4M-75
FX4M-76
FX4M-77
FX4M-78
FX4M-79
FX4M-80
FX4M-81
FX4M-82
FX4M-83
FX4M-84
FX4M-85
FX4M-86
FX4M-87
FX4M-88
89
90
91
92
93
94
95
96
97
98
99
Transfer Board
Frame
1
FX4M-89
FX4M-90
FX4M-91
FX4M-92
FX4M-93
FX4M-94
FX4M-95
FX4M-96
FX4M-97
FX4M-98
FX4M-99
FX4M-100
FX4M-101
FX4M-102
FX4M-103
FX4M-104
FX4M-105
FX4M-106
FX4M-107
FX4M-108
FX4M-109
FX4M-110
FX4M-111
FX4M-112
FX4M-113
FX4M-114
FX4M-115
FX4M-116
FX4M-117
FX4M-118
Elevation Motor
Tube Clamp
1
Micro Switch
Metal Plate
1
M5 x 12mm Screw
Gear Sleeve
2
M8 x 30 Screw
Cushion
4`
10
3
Bumper
U Bracket
13 x 6.5 Washer
M6 x 70 Screw
M10 Screw
M16 x 54 Screw
Bumper
1
15
10
2
35 x 18mm Washer
M16 Nut
15 x 8 Washer
M8 x 43 Screw
22 x 8mm Washer
Bumper
100 Roller
2
101 M6 x 45 Screw
102 Rear Roller
2
M10 x 63mm Screw
M8 x 15mm Screw
6 x 13mm Washer
M10 x Nylon Nut
M10 x 136 Screw
M8 x 89mm Bolt
Motor Holder
Motor
1
103 Rear Roller Shaft
104 Motor Hood - Bottom
105 Bushing
1
1
4
106 Lever Arm Cap - Front
107 Plastic Clamp - Top
108 Plastic Clamp - Bottom
109 Elevation Frame
110 Plastic Cap
2
2
2
1
Motor Belt
2
M3 x 8 Screw
Front Roller Shaft
Front Roller
111 Lever Arm Cap – Rear Left
112 Lever Arm Cap – Rear Right
113 Pivot Shaft
1
1
1
M10 x 30 Screw
M4 x 10 Screw
Spring Bracket
Running Board
Control Board
114 10mm Lock Washer
115 Support
2
1
116 Motor Cover Bottom
117 3/8” x 30mm Screw
118 Bearing
1
2
2
Visit us at: www.evofitness.com
Download from Www.Somanuals.com. All Manuals Search And Download.
8
FX4M MOTORIZED TREADMILL
PARTS LIST
No. Description
Qty. Order No.
No. Description
Qty. Order No.
119 22 x 10 Washer
120 14 x 10 x 8 Bushing
2
2
1
1
2
1
2
2
2
FX4M-119
FX4M-120
FX4M-121
FX4M-122
FX4M-123
FX4M-124
FX4M-125
FX4M-126
FX4M-127
121
Pivot Shaft
122 Shock
123 14 x 10 x 18.5 Bushing
124 M10 x 120mm Screw
125 Cushion
126 Spring Bracket
127 Motion Control Sensor
Visit us at: www.evofitness.com
Download from Www.Somanuals.com. All Manuals Search And Download.
9
FX4M MOTORIZED TREADMILL
PARTS DIAGRAM
A MAJORITY OF THE PARTS SHOWN HERE HAVE BEEN PREASSEMBLED AT THE FACTORY.
Visit us at: www.evofitness.com
Download from Www.Somanuals.com. All Manuals Search And Download.
10
FX4M MOTORIZED TREADMILL
PARTS DIAGRAM
A MAJORITY OF THE PARTS SHOWN HERE HAVE BEEN PREASSEMBLED AT THE FACTORY.
Visit us at: www.evofitness.com
Download from Www.Somanuals.com. All Manuals Search And Download.
11
FX4M MOTORIZED TREADMILL
ASSEMBLY
STEP 1:
Remove your treadmill from the carton and place it on the floor in an open area as shown in FIG-1.
First make sure to connect the wires. Then insert the Left and Right Handle Uprights (21 and 22) into the base Frame (46)
and secure with 6 x 13mm Washers (25), M6 x 55mm Screws (24), Plastic Caps (26) and M8 x 15mm Screws (27).
Visit us at: www.evofitness.com
Download from Www.Somanuals.com. All Manuals Search And Download.
12
FX4M MOTORIZED TREADMILL
ASSEMBLY
STEP 2:
Remove the M5 x 10mm Screw (6) then rotate the Computer Support (3) up to the correct position as shown and secure with
the M5 x 10mm Screw (6).
Visit us at: www.evofitness.com
Download from Www.Somanuals.com. All Manuals Search And Download.
13
FX4M MOTORIZED TREADMILL
ASSEMBLY
STEP 3:
Rotate the Computer (1) up to its proper angle and secure with M6 x 15mm Console Screws (4).
Visit us at: www.evofitness.com
Download from Www.Somanuals.com. All Manuals Search And Download.
14
FX4M MOTORIZED TREADMILL
ASSEMBLY
STEP 4:
Attach the Cross Tube (48) to the Left and Right Handle Uprights (21 and 22) and secure with the Metal Caps (20) and M8 x
78mm Bolts (19).
Secure the Computer Support (3) to the Left and Right Handle Uprights (21 and 22) by tightening the M8 x 25mm
Screws (17).
Visit us at: www.evofitness.com
Download from Www.Somanuals.com. All Manuals Search And Download.
15
FX4M MOTORIZED TREADMILL
ASSEMBLY
STEP 5:
Fully tighten M5 x 10mm Screws (6), M8 x 25mm Screws (17) and M8 x 78mm Bolts (19) at this time.
Visit us at: www.evofitness.com
Download from Www.Somanuals.com. All Manuals Search And Download.
16
FX4M MOTORIZED TREADMILL
ASSEMBLY
STEP 6:
Connect the Sensor Wires then attach the Right and Left Handlebars (16 and 15) to the Right and Left Handle Uprights (22
and 21) and secure using M8 x 19mm Screws (18).
Visit us at: www.evofitness.com
Download from Www.Somanuals.com. All Manuals Search And Download.
17
FX4M MOTORIZED TREADMILL
ASSEMBLY
STEP 7:
Mount the Handle Cover Right - 1 (10) and the Handle Cover Right - 2 (9) to the Right Handle Upright (22) and secure with
#8 x 15mm Screws (11) and #4 x 19mm Screws (12).
Mount the Handle Cover Left - 1 (7) and the Handle Cover Left - 2 (8) to the Left Handle Upright (21) and secure with #8 x
15mm Screws (11) and #4 x 19mm Screws (12).
Visit us at: www.evofitness.com
Download from Www.Somanuals.com. All Manuals Search And Download.
18
FX4M MOTORIZED TREADMILL
ASSEMBLY
STEP 8:
Attach the Base Frame End Caps (35) to the Left and Right Handle Upright (21 and 22) and secure using the M6 x 20mm
Screws (34).
Visit us at: www.evofitness.com
Download from Www.Somanuals.com. All Manuals Search And Download.
19
FX4M MOTORIZED TREADMILL
FOLDING INSTRUCTIONS
FOLDING INSTRUCTIONS:
Your treadmill can be folded up for space saving storage. To do this first be sure that the deck is at the lowest incline level.
Simply lift the deck up from the rear of the treadmill and fold up until it locks in place. TO PREVENT INJURY BE SURE YOU
HAVE A FIRM HOLD WHEN RAISING THE DECK. You will hear a “click” sound as the lock engages.
Visit us at: www.evofitness.com
Download from Www.Somanuals.com. All Manuals Search And Download.
20
FX4M MOTORIZED TREADMILL
TRANSPORT INSTRUCTIONS
HOW TO ROLL AWAY THE FX4 TREADMILL:
After folding the treadmill tilt it to one side (you may need the help of a friend), reach under the Base Frame (46) and pull
down the Caster Bracket (43). Repeat this procedure on the other side. Then to roll away for storage simply grab the
handlebars and push as shown below.
NOTE: After moving the treadmill to the desired location, make sure to put the Caster Brackets (43) back into their upright
position in order to stabilize the treadmill for use.
Visit us at: www.evofitness.com
Download from Www.Somanuals.com. All Manuals Search And Download.
21
FX4M MOTORIZED TREADMILL
UNFOLDING INSTRUCTIONS
UNFOLDING INSTRUCTIONS:
To unfold the treadmill for use begin by standing behind and supporting the deck with your hands. Next release the lock with
your foot by stepping on the release lever. TO PREVENT INJURY BE SURE YOU HAVE A FIRM HOLD ON THE DECK
BEFORE RELEASING THE LOCK. Slowly lower the deck until it rests securely on the ground.
Visit us at: www.evofitness.com
Download from Www.Somanuals.com. All Manuals Search And Download.
22
FX4M MOTORIZED TREADMILL
STABILIZER ADJUSTMENT
STABILIZER ADJUSTMENT:
An uneven floor or improper stabilizer level can cause the treadmill to wobble during use as well as the incline adjustment to
function incorrectly. Please follow the procedure described below to make sure the treadmill stabilizer is adjusted correctly
prior to use. You may need the assistance of another person to perform this adjustment.
1. To perform the stabilizer adjustment you first need to bring the treadmill to the highest incline level as shown in FIG1.
After you’ve completed the assembly procedure plug in the power cord and switch on the POWER SWITCH. Insert the
Safety Key and press the START button to quick start the treadmill. Press the INCLINE UP button until Level 12 shows on
the console. This is the highest incline level. Now press the STOP button and pull out the Safety Key. Switch off the
POWER SWITCH and unplug the power cord.
2. Inspect the four stabilizers (two per side) located underneath the base frame. The treadmill should sit on the floor with all
4 stabilizers resting firmly on the floor as shown in FIG2. Shake the handlebars back and forth to check if they are resting
firmly on the floor. If they are not, pull the handlebar backward to adjust the two front stabilizers and push the handlebar
forward to adjust the two rear stabilizers as shown in FIG3. Simply turn the stabilizers like a screw to adjust their heights.
Repeat this until all 4 stabilizers sit firmly on the floor.
Visit us at: www.evofitness.com
Download from Www.Somanuals.com. All Manuals Search And Download.
23
FX4M MOTORIZED TREADMILL
MAINTENANCE
HOW TO MAINTAIN THE FX4 TREADMILL:
Proper maintenance is very important to ensure your treadmill is always in top working condition. Improper maintenance
could cause damage or shorten the life of your treadmill and exceed the LIMITED WARRANTY coverage.
?? Important: Never use abrasives or solvents to clean the treadmill. To prevent damage to the computer, keep liquids
away and keep it out of direct sunlight.
?? Inspect and tighten all parts of the treadmill regularly. Replace any worn parts immediately.
BELT ADJUSTMENT:
Belt adjustment and tension performs two functions: adjustment for tension and centering. The running belt has been
adjusted properly at the factory. However transportation, uneven flooring or other unpredicted reasons could cause the belt to
shift off center resulting in the belt rubbing with the plastic side rail or end caps and possibly causing damage. To adjust the
belt back to it’s proper position please follow the directions below:
?? Walking belt has shifted to the left: First unplug the power cord from the surge protector. Using the hex key
provided, turn the left rear roller adjustment bolt 1/4 turn in the clockwise direction. Plug the power cord back into
the surge protector and run the treadmill at 2.5 mph. You should see the belt start to correct itself, moving back
towards the center. Repeat the above procedure until the walking belt is centered. It may be necessary to set
walking belt tension once you have completed this procedure if the belt feels like it is slipping while walking. Refer
below to the "Walking belt slipping" instructions.
?? Walking belt has shifted to the right: First unplug the power cord from the surge protector. Using the hex key
provided, turn the right rear roller adjustment bolt 1/4 turn in the clockwise direction. Plug the power cord back into
the surge protector and run the treadmill at 2.5 mph. You should see the belt start to correct itself, moving back
towards the center. Repeat the above procedure until the walking belt is centered. It may be necessary to set
walking belt tension once you have completed this procedure if the belt feels like it is slipping while walking. Refer
below to the "Walking belt slipping" instructions.
?? Walking belt is slipping: First unplug the power cord from the surge protector. Using the hex key provided, turn
both the left and right rear roller adjustment bolts the same distance, usually a 1/4 turn in the clockwise direction.
Plug the power cord back into the surge protector and run the treadmill at 2.5 mph. You should now walk on the belt
to determine if the belt is still slipping. Repeat the above procedure until the walking belt is not slipping. The tension
should be just tight enough not to slip.
WARNING! Do not over tighten rollers! This will cause premature roller bearing failure!
Right and left tension bolts are located at the rear of the treadmill.
Visit us at: www.evofitness.com
Download from Www.Somanuals.com. All Manuals Search And Download.
24
FX4M MOTORIZED TREADMILL
MAINTENANCE
CLEANING:
Routine cleaning of your treadmill will extend the product's life.
?? Warning: To prevent electrical shock, be sure the power to the treadmill is OFF and the power cord is unplugged
from the wall electrical outlet before attempting any cleaning or maintenance.
?? Important: Never use abrasives or solvents to clean the treadmill. To prevent damage to the computer, keep
liquids away and keep it out of direct sunlight.
?? After each workout: Wipe off the console and other treadmill surfaces with a clean, water dampened soft cloth to
remove excess perspiration.
?? Weekly: Use of a treadmill mat is recommended for ease of cleaning. Dirt from your shoes contacts the belt and
eventually makes it to underneath the treadmill. Vacuum underneath treadmill once a week.
DECK LUBRICATION:
The walking belt has been pre-lubricated at the factory. However, it is recommended that the walking board be checked
periodically for lubrication to ensure optimal treadmill performance. Your treadmill should not have to be lubricated usually
within the first year or 500 hours of use. For service call your local EVO dealer or contact us directly at 888-800-1167.
Every 3 months of operation lift the sides of the walking belt and feel the top surface of the walking board as far as you can
reach. If you feel signs of silicone, no further lubrication is required. If it feels dry to the touch, follow the instructions below.
Please use Lube 'N Walk (can be purchased from your dealer or call the number on the front of the manual), or a non-
petroleum based silicone such as "Napa 8300" (available at most stores).
To apply lubricant to the walking belt:
1. Position the walking belt so that the seam is located on top and in center of the walking board.
2. Insert the spray nozzle into the spray head of the lubricant can.
3. While lifting the side of the walking belt, position the spray nozzle between the walking belt and the board
approximately 6" from the front of the treadmill. Apply the silicone spray to the walking board, moving from the front
of the treadmill to the rear. Repeat this on the other side of the belt. Spray approximately 4 seconds on each side.
4. Allow the silicone to "set" for 1 minute before using the treadmill.
Spray lubricant from front to back.
Visit us at: www.evofitness.com
Download from Www.Somanuals.com. All Manuals Search And Download.
25
FX4M MOTORIZED TREADMILL
WARRANTY
Warranty Coverage: Smooth Fitness, Inc. ("Smooth Fitness") warrants to the original purchaser that each new product to
be free from defects in workmanship and material, under normal use and conditions.
Period of Coverage: The Warranty on this product runs from the date of your purchase for a period of LIFETIME on the
frame, TEN (10) years on the motor, FIVE (5) years on the belt, deck and rollers, THREE (3) years on the electronics and
ONE (1) year on in house labor. Smooth Fitness reserves the right to inspect damaged parts for misuse.
It is recommended that the Original Receipt be kept with the product manual.
Remedy Provided by Smooth Fitness: Smooth Fitness will provide a replacement part free of charge if a defect is found
during the Warranty period. You must pay any charges for shipping and handling outside of the Continental United States
and for labor. To obtain service call your local Smooth Retailer.
Any redemption may be by repair or replacement of the affected parts and/or product at the sole discretion of Smooth
Fitness, by personnel approved by Smooth Fitness. If repairs are required, the unit will be repaired at the location of use or
by return to the factory as deemed appropriate by Smooth Fitness.
Parts repaired or replaced pursuant to this Warranty shall be warranted for the unexpired portion of the Warranty applying to
the original product. Any technical advice furnished before or after delivery in regard to the use or application of Smooth
Fitness products is furnished without charge and on the basis that it represents Smooth Fitness' best judgment under the
circumstances but that the advice is used at your sole risk.
Procedure for Obtaining Your Remedy Under This Warranty: To obtain service call your local Smooth Retailer. To help
them assist you, please have the following information ready:
Model name or number from the cover of the manual;
Serial number located on the frame of the unit; and
The part description and the order number.
Limitations on Warranty: This Warranty will only apply to the original end user. This Warranty does not cover any
problems, damages or failures that are caused by accident, improper assembly, failure to observe cautionary labels on the
product, failure to operate the product correctly, abuse or freight damage. Smooth Fitness does not warrant against any
damage or defects that may result from repair or alterations made to the product by an unauthorized repair facility.
This Warranty shall terminate if you sell or otherwise transfer this product. This Warranty does not apply to any product
shipped or handled outside of the United States or Canada. This Warranty does not apply if the product is used for rental or
commercial use. Consequential and incidental damages are not recoverable under this Warranty. (Some states do not
allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply
to you.)
THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER EXPRESS WARRANTIES. ALL IMPLIED WARRANTIES,
INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE, ARE LIMITED IN
DURATION TO ONE (1) YEAR FROM THE EFFECTIVE DATE OF THIS WARRANTY. SMOOTH FITNESS IS NOT
LIABLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES RESULTING FROM ANY DEFECT IN PARTS NOR FOR
ANY BREACH OF EXPRESS OR IMPLIED WARRANTIES. SMOOTH FITNESS' SOLE LIABILITY UNDER THIS
WARRANTY IS LIMITED TO THE TERMS DESCRIBED IN THIS FORM. THIS WARRANTY GIVES YOU SPECIFIC
LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.
For assistance with assembly or to order replacement parts, simply call your local Smooth Retailer. To help them assist
you, please have the following information ready:
Model name or number from the cover of the manual;
Serial number located on the frame of the unit; and
The part description and order number.
Visit us at: www.evofitness.com
Download from Www.Somanuals.com. All Manuals Search And Download.
26
FX4M MOTORIZED TREADMILL
IMPORTANT STEPS
Warning:
Before using this product, please consult your personal physician for a complete physical examination. Frequent and
strenuous exercise should be approved by your doctor first. If any discomfort should result from your use of this product, stop
exercising and consult your doctor. Proper usage of this product is essential. Please read your manual carefully before
exercising.
Please keep all children away from the equipment during use and when equipment is unattended.
Always wear appropriate clothing, including athletic shoes, when exercising. Do not wear loose clothing that could become
caught during exercising.
Make sure that all bolts and nuts are tightened when equipment is in use. Periodic maintenance is required on all exercise
equipment to keep it in good condition.
Before beginning:
How you begin your exercise program depends on your physical condition. If you have been inactive for several years, or
are severely overweight, you must start slowly and increase your time gradually, a few minutes per week.
Initially you may be able to exercise only for a few minutes in your target zone. However, your aerobic fitness will improve
over the next six to eight weeks. Don’t be discouraged if it takes longer. It’s important to work at your own pace. Ultimately,
you’ll be able to exercise continuously for 30 minutes. And the better your aerobic fitness, the harder you will have to work to
stay in your target zone. But remember these essentials:
?? Contact your physician before starting a workout or training program. Have your doctor review your training and diet
programs to advise you of a workout routine you should adopt.
?? Begin your training program slowly with realistic goals that have been set by you and your doctor.
?? Supplement your program with some type of aerobic exercise such as walking, jogging, swimming, dancing and/or
bicycling. Monitor your pulse frequently. If you do not have an electronic heart rate monitor, have your physician
show you the proper way to manually check your pulse by using your wrist or neck. Establish your target heart rate
based on your age and condition.
?? Drink plenty of fluids during the course of your routine. You must replace the water content lost from excessive
exercising to avoid dehydration. Avoid drinking large amounts of cold liquids. Fluids should be at room temperature
when consumed.
Visit us at: www.evofitness.com
Download from Www.Somanuals.com. All Manuals Search And Download.
27
FX4M MOTORIZED TREADMILL
TARGET HEART RATE
Finding your pulse:
To make sure your heart is beating in its target zone, you’ll need to know how to monitor your heart rate. The easiest way is
to feel the pulse in the carotid artery on either side of your neck, between the windpipe and the large neck muscles. Count
the number of beats in ten seconds, and then multiply that number by six. This gives you the number of beats per minute.
How fast should your heart beat during aerobic exercise? Fast enough to reach and stay in its “target zone,” a range of beats
per minute that is largely determined by your age and physical condition. To determine your target zone, consult the chart
we have provided.
FIND YOUR TARGET HEART RATE
200
180
160
140
120
100
80
20
25
30
35
40
45
50
55
60
65
70
AGE IN YEARS
ADVANCED: Sports, athletic conditioning or interval training
FITNESS: Optimal training, aerobic or cardiovascular
HEALTH: Beginner, low intensity with long duration produces fat burning
Aerobic exercise:
Is any sustained activity that sends oxygen to your muscles via your heart and lungs. It will improve the fitness of your lungs
and heart: your body’s most important muscle. Aerobic fitness is promoted by any activity that uses your large muscle
groups - arms, legs or buttocks, for example. Your heart beats quickly and you breathe deeply. An aerobic exercise should
be part of your entire exercise routine.
Visit us at: www.evofitness.com
Download from Www.Somanuals.com. All Manuals Search And Download.
28
FX4M MOTORIZED TREADMILL
MUSCLE CHART
Targeted muscle groups:
The exercise routine that is performed on this product will develop primarily lower body muscle groups. These muscle groups
are shown in gray color on the chart below.
Shoulder muscles
Bicep muscle
A
C
E
G
I
B
D
F
H
J
Pectoral muscles
Abdominal muscles
Quadricep muscles
Trapezius muscles
Back muscles
Forearm muscles
Calf muscles
Tricep muscles
Gluteal muscles
K
L
Hamstring muscles
Visit us at: www.evofitness.com
Download from Www.Somanuals.com. All Manuals Search And Download.
29
FX4M MOTORIZED TREADMILL
STRETCHING ROUTINE
Warm up and cool down:
A successful exercise program consists of a warm-up, aerobic exercise, and a cool-down. Do the entire program at least two
and preferably three times a week, resting for a day between workouts. After several months, you can increase your
workouts to four or five times per week.
Warming up is an important part of your workout, and should begin every session. It prepares your body for more strenuous
exercise by heating up and stretching out your muscles, increasing your circulation and pulse rate, and delivering more
oxygen to your muscles. At the end of your workout, repeat these exercises to reduce sore muscle problems. We suggest
the warm-up and cool-down exercises on the following pages:
Toe Touch:
Slowly bend forward from your waist, letting your back and shoulders relax as you
stretch toward your toes. Reach down as far as you can and hold for 15 counts.
Shoulder Lift:
Lift your right shoulder up toward your ear for one count. Then lift your left
shoulder up for one count as you lower your right shoulder.
Head Roll:
Rotate your head to the right for one count, feeling the stretch up the left side of
your neck. Next, rotate your head back for one count, stretching your chin to the
ceiling and letting your mouth open. Rotate your head to the left for one count,
and finally, drop your head to your chest for one count.
Visit us at: www.evofitness.com
Download from Www.Somanuals.com. All Manuals Search And Download.
30
FX4M MOTORIZED TREADMILL
STRETCHING ROUTINE
Hamstring Stretch:
Sit with your right leg extended. Rest the sole of your left foot against your right
inner thigh. Stretch toward your toe as far as possible. Hold for 15 counts. Relax
and then repeat with left leg extended.
Inner Thigh Stretch:
Sit with the soles of your feet together with your knees pointing outward. Pull your
feet as close into your groin as possible. Gently push your knees towards the
floor. Hold for 15 counts.
Side Stretch:
Open your arms to the side and continue lifting them until they are over your head.
Reach your right arm as far upward toward the ceiling as you can for one count.
Feel the stretch up your right side. Repeat this action with your left arm.
Calf-Achilles Stretch:
Lean against a wall with your left leg in front of the right and your arms forward.
Keep your right leg straight and the left foot on the floor; then bend the left leg and
lean forward by moving your hips toward the wall. Hold, and then repeat on the
other side for 15 counts.
Visit us at: www.evofitness.com
Download from Www.Somanuals.com. All Manuals Search And Download.
31
FX4M MOTORIZED TREADMILL
TROUBLESHOOTING
Troubleshooting
NOTE: Do not touch any internal electric wires without consulting the manufacturer.
Treadmill will not start:
1. Make sure the power cord is plugged into a surge protector, the surge protector is plugged into a properly grounded outlet
and the surge protector is turned on (refer to the Power Requirements section in this manual).
2. Check the circuit breaker reset switch located on the front of the treadmill. Turn the power off, wait 5 minutes then press
the rest switch.
3. Check the house electrical breaker box and the circuit breaker for the room the treadmill is located in. If it has tripped,
reset or have an electrician replace the breaker in home.
4. Have an electrician check for inadequate voltage at the outlet.
Treadmill looses power during use:
1. Check the circuit breaker reset switch located on the front of the treadmill. Turn the power off, wait 5 minutes then press
the rest switch.
If the treadmill still will not operate, please call your local EVO dealer or contact us directly at 888-800-1167.
2. Check the house electrical breaker box and the circuit breaker for the room the treadmill is located in. If it has tripped,
reset or have an electrician replace the breaker in home.
Treadmill walking belt slows during use:
1. Check to make sure the treadmill is securely plugged into an UL-listed surge protector, rated at 15 amps, with a 14-guage
cord of five feet or less and the surge protector is securely plugged into the outlet. If the treadmill still will not operate, please
call your local EVO dealer or contact us directly at 888-800-1167.
Treadmill walking belt slips or is not centered on rear roller:
Refer to the Belt Adjustment section of this manual. If you require additional assistance please call your local EVO dealer or
contact us directly at 888-800-1167.
Visit us at: www.evofitness.com
Download from Www.Somanuals.com. All Manuals Search And Download.
Smooth Fitness
112 Gaither Drive
Mt. Laurel, NJ 08054
Toll Free Customer Service:
1.888.800.1167
Website:
Copyright © 2003
Download from Www.Somanuals.com. All Manuals Search And Download.
|