USER’S MANUAL
EVO XPLORE ELLIPTICAL TRAINER
MODEL NUMBER: XPLORE
USER WEIGHT LIMITATION: 275lbs.
TOLL FREE CUSTOMER SERVICE NUMBER: 1.888.800.1167
SERIAL NUMBER (found on frame):
Download from Www.Somanuals.com. All Manuals Search And Download.
3
EVO XPLORE ELLIPTICAL TRAINER
HARDWARE COMPARISON CHART
Hardware chart:
For your convenience, we have identified the hardware used in the assembly of this product. This chart is provided to help
you identify those items that may be unfamiliar to you.
NO. DESCRIPTION
QTY.
44
45
50
63
66
70
84
85
86
87
88
M8 Nylon Nut
4
4
4
2
2
4
4
2
4
4
2
Curved Washer
M8 x 48mm Carriage Bolt
Nut Cover 38mm
M10 x 88mm Carriage Bolt
M8 x 22mm Allen Head Bolt
Spring Washer
M10 x 20mm Washer
M8 x 16mm Washer
Nut Cover 13mm
M10 Nylon Nut
MILLIMETERS
Visit us at: www.evofitness.com
Download from Www.Somanuals.com. All Manuals Search And Download.
4
EVO XPLORE ELLIPTICAL TRAINER
PARTS LIST
No. Description
Qty. Order No.
No. Description
Qty. Order No.
1
M10 Nut
2
4
2
1
1
1
1
2
1
4
4
1
1
1
1
2
2
1
1
1
2
1
1
1
2
1
1
1
2
XPLORE-01
XPLORE-02
XPLORE-03
XPLORE-04
XPLORE-05
XPLORE-06
XPLORE-07
XPLORE-08
XPLORE-09
XPLORE-10
XPLORE-11
XPLORE-12
XPLORE-13
XPLORE-14
XPLORE-15
XPLORE-16
XPLORE-17
XPLORE-18
XPLORE-19
XPLORE-20
XPLORE-21
XPLORE-22
XPLORE-23
XPLORE-24
XPLORE-25
XPLORE-26
XPLORE-27
XPLORE-28
XPLORE-29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
Crank Disk
2
2
8
2
2
1
2
2
1
1
1
2
2
4
4
8
2
4
2
6
4
1
1
1
4
2
2
4
4
XPLORE-30
XPLORE-31
XPLORE-32
XPLORE-33
XPLORE-34
XPLORE-35
XPLORE-36
XPLORE-37
XPLORE-38
XPLORE-39
XPLORE-40
XPLORE-41
XPLORE-42
XPLORE-43
XPLORE-44
XPLORE-45
XPLORE-46
XPLORE-47
XPLORE-48
XPLORE-49
XPLORE-50
XPLORE-51
XPLORE-52
XPLORE-53
XPLORE-54
XPLORE-55
XPLORE-56
XPLORE-57
XPLORE-58
2
M6 x 8mm Screw
Flywheel Axle Holder
Jockey Wheel Bracket
Washer
Crank Frame
3
#8 x 15mm Screw
C - Holder Buckle
Bearing (6004zz)
Crank Shaft
4
5
6
E - Holder Buckle
Flywheel Axle
7
Dual Action Cap
Rubber Grip
8
Bearing (6000zz)
Small Belt Pulley
M8 x 15 CAP Screw
Spring Washer
Aluminum Disk
Flywheel
9
Left Dual Action Handle
Right Dual Action Handle
Computer
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
Fixed Handle Rubber Grip
Hand Pulse Sensor
M6 x 15mm Screw
M8 Nylon Nut
M10 x 16mm Washer
M8 Nut
M6 x 15mm Screw
Bearing (6300zz)
M6 x 12mm Screw
Jockey Wheel Spring
Magnet Bracket Spring
M10 x 22mm Washer
Spring
Curved Washer
Nut Cover - 50mm
M8 x 15mm Hex Head
Screw
M8 x 30mm Washer
Bushing - 50mm
M8 x 48mm Carriage Bolt
Left Dual Action Arm
Upright Support
Magnet Bracket Shaft
Magnet Bracket
#3 x 8mm Screw
Speed Box
Right Dual Action Arm
Bushing - 38mm
Action Arm Shaft
Main Frame
M8 x 32mm Washer
Bushing - 32mm
Belt
Crank Disk Insert
M8 x 60mm Carriage Bolt
Visit us at: www.evofitness.com
Download from Www.Somanuals.com. All Manuals Search And Download.
5
EVO XPLORE ELLIPTICAL TRAINER
PARTS LIST
No. Description
Qty. Order No.
No. Description
Qty. Order No.
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
Left Foot Pedal
1
1
4
4
2
8
2
2
2
1
1
8
2
1
1
1
1
1
1
1
2
1
1
1
2
8
2
4
4
2
XPLORE-59
XPLORE-60
XPLORE-61
XPLORE-62
XPLORE-63
XPLORE-64
XPLORE-65
XPLORE-66
XPLORE-67
XPLORE-68
XPLORE-69
XPLORE-70
XPLORE-71
XPLORE-72
XPLORE-73
XPLORE-74
XPLORE-75
XPLORE-76
XPLORE-77
XPLORE-78
XPLORE-79
XPLORE-80
XPLORE-81
XPLORE-82
XPLORE-83
XPLORE-84
XPLORE-85
XPLORE-86
XPLORE-87
XPLORE-88
Left Foot Pedal Tube
M6 x 13mm Washer
Foot Pedal Knob
Nut Cover - 38mm
#8 x 15mm Screw
Safety Spacer
M10 x 88mm Carriage Bolt
Oval Head Plug
Right Cover
Left Cover
M8 x 22mm Allen Head Bolt
Rear Cap w/ Height Adjustment
Rear Stabilizer
Front Foot Cap with Wheel (L)
Front Stabilizer
Front Foot Cap with Wheel (R)
Gear Box
Right Foot Pedal Tube
Right Foot Pedal
Nut Cover - 32mm
Adaptor
Upper Computer Wire
Lower Computer Wire
Hand Pulse Sensor Wire
Spring Washer
M10 x 20mm Washer
M8 x 16mm Washer
Nut Cover – 13mm
M10 Nylon Nut
Visit us at: www.evofitness.com
Download from Www.Somanuals.com. All Manuals Search And Download.
6
EVO XPLORE ELLIPTICAL TRAINER
PARTS DIAGRAM
A MAJORITY OF THE PARTS SHOWN HERE HAVE BEEN PREASSEMBLED AT THE FACTORY.
Visit us at: www.evofitness.com
Download from Www.Somanuals.com. All Manuals Search And Download.
7
EVO XPLORE ELLIPTICAL TRAINER
PARTS DIAGRAM
A MAJORITY OF THE PARTS SHOWN HERE HAVE BEEN PREASSEMBLED AT THE FACTORY.
Visit us at: www.evofitness.com
Download from Www.Somanuals.com. All Manuals Search And Download.
8
EVO XPLORE ELLIPTICAL TRAINER
PARTS DIAGRAM
A MAJORITY OF THE PARTS SHOWN HERE HAVE BEEN PREASSEMBLED AT THE FACTORY.
Visit us at: www.evofitness.com
Download from Www.Somanuals.com. All Manuals Search And Download.
9
EVO XPLORE ELLIPTICAL TRAINER
ASSEMBLY
STEP 1:
Attach the Front and Rear Stabilizers (74 and 72) to the Main Frame (27) using four M8 x 22mm Allen Head Bolts (70),
Spring Washers (84) and Curved Washers (45) as shown. Make sure the screws are tightly fastened.
Visit us at: www.evofitness.com
Download from Www.Somanuals.com. All Manuals Search And Download.
10
EVO XPLORE ELLIPTICAL TRAINER
ASSEMBLY
STEP 2:
Attach the Right Foot Pedal (78) onto the Right Foot Pedal Tube (77) using two M8 x 60mm Carriage Bolts (58), M6 x 13mm
Washers (61) and Foot Pedal Knobs (62) as shown. Repeat this procedure to attach the Left Foot Pedal (59) to the Left Foot
Pedal Tube (60). The pedal position is adjustable and can be changed after the unit is fully assembled.
Visit us at: www.evofitness.com
Download from Www.Somanuals.com. All Manuals Search And Download.
11
EVO XPLORE ELLIPTICAL TRAINER
ASSEMBLY
STEP 3:
Attach the Right Dual Action Handle (39) to the Right Dual Action Arm (53) using two M8 x 48mm Carriage Bolts (50), M8 x
16mm Washers (86), M8 Nylon Nuts (44) and 13mm Nut Covers (87) as shown. Repeat this procedure to attach the Left
Dual Action Handle (38) to the Left Dual Action Arm (51).
Visit us at: www.evofitness.com
Download from Www.Somanuals.com. All Manuals Search And Download.
12
EVO XPLORE ELLIPTICAL TRAINER
ASSEMBLY
STEP 4:
NOTE: Before attaching the Upright Post Assembly plug the Upper Computer Wire (81) into the Lower Computer Wire (82)
as shown.
Attach upright post assembly. Insert the Upright Support (52) into the Main Frame (27). Insert and slightly tighten the four
M8 x 22mm Allen Head Bolts (70), Spring Washers (84) and Curved Washers (45). Align the Upright Support (52) so that the
crossbar is parallel with the Front Stabilizer (74) then fully tighten the M8 x 22mm Allen Head Bolts (70).
Insert one Action Arm Shaft (55) into the Right Dual Action Arm (53) as shown. Attach the Right Dual Action Arm (53) to the
Right Foot Pedal Tube (77) using one M10 x 88mm Carriage Bolt (66), M10 x 20mm Washer (85) and M8 Nylon Nut (44). Do
not over tighten the nut, as this joint needs to pivot freely. Insert one 38mm Nut Cover (63) over the M8 Nylon Nut (44).
Repeat this procedure to attach the Left Dual Action Arm (51) to the Left Foot Pedal Tube (60).
Visit us at: www.evofitness.com
Download from Www.Somanuals.com. All Manuals Search And Download.
13
EVO XPLORE ELLIPTICAL TRAINER
ASSEMBLY
STEP 5:
Connect the Upper Computer Wires (81) and Hand Pulse Sensor Wires (83) as shown. Insert excess cable into the hole in
the mounting plate. Make sure the cables remain undamaged. Attach the Computer (40) to the mounting plate on the
Upright Support (52) using four M6 x 15mm Screws (43) as shown.
Visit us at: www.evofitness.com
Download from Www.Somanuals.com. All Manuals Search And Download.
14
EVO XPLORE ELLIPTICAL TRAINER
LEVEL AND PEDAL ADJUSTMENT
LEVEL ADJUSTMENT:
To adjust the levelers so the rear stabilizer is level to the floor, simply turn the adjustment knobs on the ends of the rear foot
caps.
PEDAL ADJUSTMENT:
To adjust the pedals, simply remove the two knobs under the pedal and lift the pedal up off of the pedal rail. Place the pedal
in the desired location and secure in place by reattaching the knobs.
Visit us at: www.evofitness.com
Download from Www.Somanuals.com. All Manuals Search And Download.
15
EVO XPLORE ELLIPTICAL TRAINER
TRANSPORT INSTRUCTIONS
TRANSPORT INSTRUCTIONS:
The transportation wheels on the front foot caps allow for easy maneuvering. Simply pull back on the fixed handlebars until
the wheels touch the floor. Then roll the unit to a desired location.
Visit us at: www.evofitness.com
Download from Www.Somanuals.com. All Manuals Search And Download.
16
EVO XPLORE ELLIPTICAL TRAINER
COMPUTER INSTRUCTIONS
START Button
DOWN Button
A
C
E
G
B
D
F
RESET Button
TIME Window
DISTANCE/WATTS Window
CALORIES/RESISTANCE Window
SPEED Window
H
HEAR RATE/LEVEL Window
UP Button
I
J
ENTER Button
STOP Button
K
Visit us at: www.evofitness.com
Download from Www.Somanuals.com. All Manuals Search And Download.
17
EVO XPLORE ELLIPTICAL TRAINER
COMPUTER INSTRUCTIONS
FUNCTIONS AND BUTTONS
RESET: Press and hold to reset all the functions and return to User Set Up mode
STOP: Press STOP to pause the functions during your exercise program. All the data on the display will freeze. Press
START to resume the program and all the data displayed will continue until the program has finished.
SPEED: Displays current exercise speed.
LEVEL: Displays the current level of intensity of your exercise program.
CALORIES:
Count Up: This measures total calories burned during exercise.
Count Down: If you have set the number of calories, the computer will count down from that preset number down to zero.
This data is a guide and should not be used for medical assessment. Please note when setting a target this is in blocks of 10
from 0 to 990.
RESISTANCE: Displays the current resistance level from 1 to 16.
DISTANCE:
Count Up: This measures the total distance from 0 to 99.5ML/KM.
Count Down: If you have set the target distance, the computer will count down from that preset distance down to zero as
soon as you start exercising.
WATT: This displays your current wattage output. Watts are displayed from 110W to 350W.
Please Note: Do not set below 110Watts.
TIME:
Count Up: The computer measures total exercise time from 16:00 up to 99:00.
Count Down: If you have set the target time, the computer will count down from that preset time down to 0:00.
HEART RATE: This displays your current Heart Rate. You will need to be wearing the chest strap in order for this to be
displayed. Heart Rate displays from 77 to 240 beats per minute.
START: Press START to begin your exercise.
ENTER: Press ENTER to confirm the setting of program.
QUICK START:
When the elliptical is in the POWER ON status, press the START button to activate the QUICK START program. The TIME,
DISTANCE and CALORIES will count up when you start exercising.
PROGRAM:
To select one of the User Programs, you will need to select the USER CODE first. Press the UP/DOWN button to select the
USER CODE from U1 to U9. This is shown in the SPEED display. Press the ENTER button to confirm the user code. If the
user information has been previously input, press ENTER and hold for 5 seconds, the computer will then skip the user
information set up procedure and enter the program select procedure. To input new information please follow the procedure
below.
WEIGHT set up – After the User Code has been confirmed the TIME display will show 150lbs/68kg or the previous setting
and begin flashing. Press the UP/DOWN button to adjust the user weight information. Then press ENTER to confirm.
HEIGHT set up – After the WEIGHT has been confirmed the DISTANCE/WATTS display will show 67in/170cm or the
previous setting and begin flashing. Press the UP/DOWN button to adjust the user height information. Then press ENTER to
confirm.
AGE set up – After the HEIGHT has been confirmed the CALORIES display will show 35 or the previous setting and begin
flashing. Press the UP/DOWN button to adjust the user age information. Then press ENTER to confirm.
Visit us at: www.evofitness.com
Download from Www.Somanuals.com. All Manuals Search And Download.
18
EVO XPLORE ELLIPTICAL TRAINER
COMPUTER INSTRUCTIONS
TARGET HEART RATE set up – After the AGE has been confirmed, the HEART RATE/LEVEL display will show 157 beats
per minute (bpm) or the previous setting and begin flashing. Press the UP/DOWN button to adjust the user maximum target
workout heart rate information. Then press ENTER to confirm.
P1 TO P8 PROGRAMS SELECTING PROCEDURE
After setting the target heart rate press ENTER to confirm. The SPEED display will show P1 flashing. Press the UP/DOWN
button, to scroll through P1 to P8, press ENTER to confirm the program.
P1 - TARGET TIME
After you have selected P1 TARGET TIME, the TIME display will show the time setting of 16:00 minutes. Press the UP
button to adjust target time then press ENTER to confirm. Press START to begin the exercise program.
To increase or decrease the resistance while exercising, press the UP/DOWN button.
To pause the program while exercising, press the STOP button.
To resume exercising, press the START button.
If the RESET button is pressed after pausing the program, the computer returns to Power on Status. To return to the
program mode press and hold the ENTER button.
P2 - TARGET DISTANCE
After you have selected P2 TARGET DISTANCE, the DISTANCE display will show the distance setting of 0.0ML/KM. Press
the UP/DOWN button to adjust target distance then press ENTER to confirm. Press START to begin the exercise program.
To increase or decrease the resistance while exercising, press the UP/DOWN button.
To pause the program while exercising, press the STOP button.
To resume exercising, press the START button.
If the RESET button is pressed after pausing the program, the computer returns to Power on Status. To return to the program
mode press and hold the ENTER button.
P3 - TARGET CALORIES
After you have selected P3 TARGET CALORIES, the CALORIES display will show the calories setting 0. Press the
UP/DOWN button to adjust target calories then press ENTER to confirm. Press START to begin the exercise program.
To increase or decrease the resistance while exercising, press the UP/DOWN button.
To pause the program while exercising, press the STOP button.
To resume exercising, press the START button.
If the RESET button is pressed after pausing the program, the computer returns to Power on Status. To return to the
program mode press and hold the ENTER button.
P4 - RANDOM
After you have selected P4 RANDOM, the TIME display will show the workout time setting of 16:00 minutes. Press the
UP/DOWN button to adjust workout time then press ENTER to confirm. Press START to begin the exercise program.
The RANDOM program has 50 different RESISTANCE based programs. If while exercising, you find the level of
RESISTANCE too intense you can press the UP/DOWN button to decrease the resistance.
To pause the program while exercising, press the STOP button.
To resume exercising, press the START button.
If the RESET button is pressed after pausing the program, the computer returns to Power on Status. To return to the
program mode press and hold the ENTER button.
P5 - FAT BURNING
After you have selected P5 FAT BURNING, the TIME display will show the workout time setting of 16:00 minutes. Press the
UP/DOWN button to adjust workout time then press ENTER to confirm. Press START to begin the exercise program.
The aim of a FAT BURNING program is to exercise for a longer period of time at a reduced level of intensity. This will allow
you to burn more calories than if you were using a program that has higher levels of resistance over a shorter period of time.
Please Note: On this particular program once the highest level of resistance is set, the resistance cannot be decreased
while exercising.
To decrease the resistance you will need to stop the program and start again.
To pause the program while exercising, press the STOP button.
To resume exercising, press the START button.
If the RESET button is pressed after pausing the program, the computer returns to Power on Status. To return to the
program mode press and hold the ENTER button.
Visit us at: www.evofitness.com
Download from Www.Somanuals.com. All Manuals Search And Download.
19
EVO XPLORE ELLIPTICAL TRAINER
COMPUTER INSTRUCTIONS
Fat Burning Profile: (One complete cycle lasts 16 minutes, two cycles last 32 minutes and so on.)
Resistance
1
3
7
9
9
9
9
9
9
9
9
9
9
7
3
1
P6 - INTERVAL
After you have selected P6 INTERVAL, the TIME display will show the workout time setting of 16:00 minutes. Press the
UP/DOWN button to adjust workout time then press ENTER to confirm. Press START to begin the exercise program.
The aim of an INTERVAL program is to exercise at levels of LOW and HIGH intensity for short periods of time. There is one
profile with 8 different levels of Intensity. The resistance will be changed automatically while exercising, according to the
following profile.
To increase or decrease the resistance while exercising, press the UP/DOWN button.
To pause the program while exercising, press the STOP button.
To resume exercising, press the START button.
If the RESET button is pressed after pausing the program, the computer returns to Power on Status. To return to the
program mode press and hold the ENTER button.
Interval Profile: (One complete cycle lasts 16 minutes, two cycles last 32 minutes and so on.)
Levels
Resistance
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
9
9
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
9
9
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
9
9
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
9
9
1
2
3
4
5
6
7
8
10
11
12
13
14
15
16
10
11
12
13
14
15
16
10
11
12
13
14
15
16
10
11
12
13
14
15
16
10
11
12
13
14
15
16
10
11
12
13
14
15
16
10
11
12
13
14
15
16
10
11
12
13
14
15
16
P7 - ENDURANCE
After you have selected P7 ENDURANCE, the TIME display will show the workout time of setting 16:00 minutes. Press the
UP/DOWN button to adjust workout time then press ENTER to confirm. Press START to begin the exercise.
The aim of an ENDURANCE program is to start at a low level of resistance and then at ever increasing higher levels of
resistance in order that the body exercises at higher levels of intensity. The profile ends with a lower level of intensity to
reduce the heart rate. There is one profile with 8 levels of intensity. The resistance will be changed automatically while
exercising, according to the following profile.
To increase or decrease the resistance while exercising, press the UP/DOWN button.
To pause the program while exercising, press the STOP button.
To resume exercising, press the START button.
If the RESET button is pressed after pausing the program, the computer returns to Power on Status. To return to the program
mode press and hold the ENTER button
Visit us at: www.evofitness.com
Download from Www.Somanuals.com. All Manuals Search And Download.
20
EVO XPLORE ELLIPTICAL TRAINER
COMPUTER INSTRUCTIONS
Endurance Profile: (One complete cycle lasts 16 minutes, two cycles last 32 minutes and so on.)
Levels
Resistance
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
3
4
3
4
4
5
4
5
5
6
5
6
6
7
6
7
7
7
9
9
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
8
8
10
11
12
13
14
15
16
10
11
12
13
14
15
16
5
5
6
6
7
7
8
8
9
9
6
6
7
7
8
8
9
9
10
11
12
13
14
10
11
12
13
14
7
7
8
8
9
9
10
11
12
13
10
11
12
13
8
8
9
9
10
11
12
10
11
12
9
9
10
11
10
11
10
10
P8 - WATT CONTROL
After you have selected the P8 WATT CONTROL program, the WATT display will show the default workout watt setting
110W. Press the UP/DOWN button to adjust workout watts then press ENTER to confirm. Then the TIME display will show
the default workout time setting 16:00 minutes. Press the UP/DOWN button to adjust workout time then press ENTER to
confirm. Press START to begin the exercise program. The resistance will be changed automatically while exercising. The
program will change the resistance automatically to match the user watts setting.
To increase or decrease the resistance while exercising, press the UP/DOWN button.
To pause the program while exercising, press the STOP button.
To resume exercising, press the START button.
If the RESET button is pressed after pausing the program, the computer returns to Power on Status. To return to the
program mode press and hold the ENTER button.
P9 - TARGET HEART RATE
After you have selected P9 TARGET HEARTRATE, the TIME display will show the workout time setting 16:00 minutes.
Press the UP/DOWN button to adjust workout time then press ENTER to confirm. Press START to begin the exercise
program.
To increase or decrease the resistance whilst exercising, press the UP/DOWN button.
To pause the program whilst exercising, press the STOP button. To resume exercising, press the START button.
If the RESET button is pressed after pausing the program, the computer returns to Power on Status. To return to the
program mode press and hold the ENTER button.
WARM UP – TARGET HEART RATE
After completing the TIME set up and starting the program, there is a 3-minute WARM UP program to help you reach the
minimum target workout heart rate. The resistance will start from 1. If the actual pulse rate does not reach the minimum
target workout heart rate, the resistance will increase one level every 15 seconds. The computer will detect user heart rate
per 15 seconds. When the computer detects the actual pulse rate has reached the minimum target workout heart rate, the
resistance will stop increasing and continue at the same resistance until the 3 minute warm up is complete and then go into
the HEART RATE CONTROL main program.
If you cannot reach the minimum target workout heart rate in 3 minutes, the program will continue the second 3-minute
WARM UP program. If during the second WARM UP the user still cannot reach the minimum target workout heart rate, the
computer will continue on to the third WARM UP procedure for 3 minutes. If the third WARM UP program still cannot bring
up the actual pulse rate to the minimum target workout heart rate, the program will stop and TIME display will show FAIL.
Visit us at: www.evofitness.com
Download from Www.Somanuals.com. All Manuals Search And Download.
21
EVO XPLORE ELLIPTICAL TRAINER
COMPUTER INSTRUCTIONS
HEART RATE CONTROL MAIN PROGRAM
After the actual pulse rate reaches the minimum target workout heart rate and completes the warm up program, the computer
will go into the main program and the time will count down from the pre-set time. During the main program, the computer will
detect the user heart rate per 30 seconds. If the actual pulse rate cannot reach the maximum target workout heart rate, the
resistance level will be increased by 1 level every 30 seconds until the pulse rate reaches the maximum target workout heart
rate or the resistance level will increase by 16 levels. If the actual pulse is higher than the maximum target workout heart
rate, then the resistance will be reduced 1 level every 30 seconds until the actual heart rate meets the maximum target
workout heart rate. If the actual pulse is higher than the maximum target heart rate over 3 minutes, the computer would stop
the HEART RATE CONTROL program then begin the COOL DOWN function.
COOL DOWN – TARGET HEART RATE
After completing the HEART RATE CONTROL program and the time counts down to zero, start the one-minute Cool Down
program. The TIME display will show ‘COOL’ and start blinking. The resistance will return to level 1 as the time counts down
from 1:00.
ENGLISH TO METRIC CONVERSION
The computer display can show both ENGLISH and METRIC information. If you want to change from ENGLISH to METRIC,
please follow the procedure below.
When the computer is in the power on status, press and hold the ENTER and STOP buttons. The LED on the computer will
light up either ENGLISH or METRIC. Press the UP or DOWN buttons to switch between ENGLISH/METRIC then press the
ENTER button to confirm the selection and return to POWER ON status.
Visit us at: www.evofitness.com
Download from Www.Somanuals.com. All Manuals Search And Download.
22
EVO XPLORE ELLIPTICAL TRAINER
WARRANTY
Warranty Coverage: Smooth Fitness, Inc. ("Smooth Fitness") warrants to the original purchaser that each new product to be
free from defects in workmanship and material, under normal use and conditions.
Period of Coverage: The Warranty on this product runs from the date of your purchase for a period of ONE (1) year on all
parts and labor. Smooth Fitness reserves the right to inspect damaged parts for misuse.
It is recommended that the Original Receipt be kept with the product manual.
Remedy Provided by Smooth Fitness: Smooth Fitness will provide a replacement part free of charge if a defect is found
during the Warranty period. You must pay any charges for shipping and handling outside of the Continental United States
and for labor. To obtain service call your local Smooth Retailer.
Any redemption may be by repair or replacement of the affected parts and/or product at the sole discretion of Smooth
Fitness, by personnel approved by Smooth Fitness. If repairs are required, the unit will be repaired at the location of use or
by return to the factory as deemed appropriate by Smooth Fitness.
Parts repaired or replaced pursuant to this Warranty shall be warranted for the unexpired portion of the Warranty applying to
the original product. Any technical advice furnished before or after delivery in regard to the use or application of Smooth
Fitness products is furnished without charge and on the basis that it represents Smooth Fitness' best judgment under the
circumstances but that the advice is used at your sole risk.
Procedure for Obtaining Your Remedy Under This Warranty: To obtain service call your local Smooth Retailer. To help
them assist you, please have the following information ready:
•
•
•
Model name or number from the cover of the manual;
Serial number located on the frame of the unit; and
The part description and the order number.
Limitations on Warranty: This Warranty will only apply to the original end user. This Warranty does not cover any
problems, damages or failures that are caused by accident, improper assembly, failure to observe cautionary labels on the
product, failure to operate the product correctly, abuse or freight damage. Smooth Fitness does not warrant against any
damage or defects that may result from repair or alterations made to the product by an unauthorized repair facility.
This Warranty shall terminate if you sell or otherwise transfer this product. This Warranty does not apply to any product
shipped or handled outside of the United States or Canada. This Warranty does not apply if the product is used for rental or
commercial use. Consequential and incidental damages are not recoverable under this Warranty. (Some states do not allow
the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.)
THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER EXPRESS WARRANTIES. ALL IMPLIED WARRANTIES,
INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE, ARE LIMITED IN
DURATION TO ONE (1) YEAR FROM THE EFFECTIVE DATE OF THIS WARRANTY. SMOOTH FITNESS IS NOT
LIABLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES RESULTING FROM ANY DEFECT IN PARTS NOR FOR
ANY BREACH OF EXPRESS OR IMPLIED WARRANTIES. SMOOTH FITNESS' SOLE LIABILITY UNDER THIS
WARRANTY IS LIMITED TO THE TERMS DESCRIBED IN THIS FORM. THIS WARRANTY GIVES YOU SPECIFIC LEGAL
RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.
For assistance with assembly or to order replacement parts, simply call your local Smooth Retailer. To help them assist you,
please have the following information ready:
•
•
•
Model name or number from the cover of the manual;
Serial number located on the frame of the unit; and
The part description and order number.
Visit us at: www.evofitness.com
Download from Www.Somanuals.com. All Manuals Search And Download.
23
EVO XPLORE ELLIPTICAL TRAINER
IMPORTANT STEPS
Warning:
Before using this product, please consult your personal physician for a complete physical examination. Frequent and
strenuous exercise should be approved by your doctor first. If any discomfort should result from your use of this product, stop
exercising and consult your doctor. Proper usage of this product is essential. Please read your manual carefully before
exercising.
Please keep all children away from the equipment during use and when equipment is unattended.
Always wear appropriate clothing, including athletic shoes, when exercising. Do not wear loose clothing that could become
caught during exercising.
Make sure that all bolts and nuts are tightened when equipment is in use. Periodic maintenance is required on all exercise
equipment to keep it in good condition.
Before beginning:
How you begin your exercise program depends on your physical condition. If you have been inactive for several years, or
are severely overweight, you must start slowly and increase your time gradually, a few minutes per week.
Initially you may be able to exercise only for a few minutes in your target zone. However, your aerobic fitness will improve
over the next six to eight weeks. Don’t be discouraged if it takes longer. It’s important to work at your own pace. Ultimately,
you’ll be able to exercise continuously for 30 minutes. And the better your aerobic fitness, the harder you will have to work to
stay in your target zone. But remember these essentials:
•
Contact your physician before starting a workout or training program. Have your doctor review your training and diet
programs to advise you of a workout routine you should adopt.
•
•
Begin your training program slowly with realistic goals that have been set by you and your doctor.
Supplement your program with some type of aerobic exercise such as walking, jogging, swimming, dancing and/or
bicycling. Monitor your pulse frequently. If you do not have an electronic heart rate monitor, have your physician
show you the proper way to manually check your pulse by using your wrist or neck. Establish your target heart rate
based on your age and condition.
•
Drink plenty of fluids during the course of your routine. You must replace the water content lost from excessive
exercising to avoid dehydration. Avoid drinking large amounts of cold liquids. Fluids should be at room temperature
when consumed.
Visit us at: www.evofitness.com
Download from Www.Somanuals.com. All Manuals Search And Download.
24
EVO XPLORE ELLIPTICAL TRAINER
TARGET HEART RATE
Finding your pulse:
To make sure your heart is beating in its target zone, you’ll need to know how to monitor your heart rate. The easiest way is
to feel the pulse in the carotid artery on either side of your neck, between the windpipe and the large neck muscles. Count
the number of beats in ten seconds, and then multiply that number by six. This gives you the number of beats per minute.
How fast should your heart beat during aerobic exercise? Fast enough to reach and stay in its “target zone,” a range of beats
per minute that is largely determined by your age and physical condition. To determine your target zone, consult the chart
we have provided.
FIND YOUR TARGET HEART RATE
200
180
160
140
120
100
80
20
25
30
35
40
45
50
55
60
65
70
AGE IN YEARS
ADVANCED: Sports, athletic conditioning or interval training
FITNESS: Optimal training, aerobic or cardiovascular
HEALTH: Beginner, low intensity with long duration produces fat burning
Aerobic exercise:
Is any sustained activity that sends oxygen to your muscles via your heart and lungs. It will improve the fitness of your lungs
and heart: your body’s most important muscle. Aerobic fitness is promoted by any activity that uses your large muscle
groups - arms, legs or buttocks, for example. Your heart beats quickly and you breathe deeply. An aerobic exercise should
be part of your entire exercise routine.
Visit us at: www.evofitness.com
Download from Www.Somanuals.com. All Manuals Search And Download.
25
EVO XPLORE ELLIPTICAL TRAINER
MUSCLE CHART
Targeted muscle groups:
The exercise routine that is performed on this product will develop the upper and lower body muscle groups. These muscle
groups are shown in gray color on the chart below.
Shoulder muscles
Bicep muscle
A
C
E
G
I
B
D
F
H
J
Pectoral muscles
Abdominal muscles
Quadricep muscles
Trapezius muscles
Back muscles
Forearm muscles
Calf muscles
Tricep muscles
Gluteal muscles
K
L
Hamstring muscles
Visit us at: www.evofitness.com
Download from Www.Somanuals.com. All Manuals Search And Download.
26
EVO XPLORE ELLIPTICAL TRAINER
STRETCHING ROUTINE
Warm up and cool down:
A successful exercise program consists of a warm-up, aerobic exercise, and a cool-down. Do the entire program at least two
and preferably three times a week, resting for a day between workouts. After several months, you can increase your
workouts to four or five times per week.
Warming up is an important part of your workout, and should begin every session. It prepares your body for more strenuous
exercise by heating up and stretching out your muscles, increasing your circulation and pulse rate, and delivering more
oxygen to your muscles. At the end of your workout, repeat these exercises to reduce sore muscle problems. We suggest
the warm-up and cool-down exercises on the following pages:
Toe Touch:
Slowly bend forward from your waist, letting your back and shoulders relax as you
stretch toward your toes. Reach down as far as you can and hold for 15 counts.
Shoulder Lift:
Lift your right shoulder up toward your ear for one count. Then lift your left
shoulder up for one count as you lower your right shoulder.
Head Roll:
Rotate your head to the right for one count, feeling the stretch up the left side of
your neck. Next, rotate your head back for one count, stretching your chin to the
ceiling and letting your mouth open. Rotate your head to the left for one count,
and finally, drop your head to your chest for one count.
Visit us at: www.evofitness.com
Download from Www.Somanuals.com. All Manuals Search And Download.
27
EVO XPLORE ELLIPTICAL TRAINER
STRETCHING ROUTINE
Hamstring Stretch:
Sit with your right leg extended. Rest the sole of your left foot against your right
inner thigh. Stretch toward your toe as far as possible. Hold for 15 counts. Relax
and then repeat with left leg extended.
Inner Thigh Stretch:
Sit with the soles of your feet together with your knees pointing outward. Pull your
feet as close into your groin as possible. Gently push your knees towards the
floor. Hold for 15 counts.
Side Stretch:
Open your arms to the side and continue lifting them until they are over your head.
Reach your right arm as far upward toward the ceiling as you can for one count.
Feel the stretch up your right side. Repeat this action with your left arm.
Calf-Achilles Stretch:
Lean against a wall with your left leg in front of the right and your arms forward.
Keep your right leg straight and the left foot on the floor; then bend the left leg and
lean forward by moving your hips toward the wall. Hold, and then repeat on the
other side for 15 counts.
Visit us at: www.evofitness.com
Download from Www.Somanuals.com. All Manuals Search And Download.
Smooth Fitness
112 Gaither Drive
Mt. Laurel, NJ 08054
Toll Free Customer Service:
1.888.800.1167
Website:
Copyright © 2003
Download from Www.Somanuals.com. All Manuals Search And Download.
|