EverFocus Car Video System EN 7517E User Manual

Instruction Manual  
EN-7517E / EN-7519E  
17” and 19” Value TFT-LCD Monitor  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1…………………………………………………………………………… INSTRUCTION MANUAL  
Important Safety Instruction  
1. Read these instructions.  
2. Keep these Instructions.  
3. Heed all warnings.  
4. Follow all instructions.  
5. Do not use this apparatus near water.  
6. Clean only with dry cloth.  
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions..  
8. Do not install near any heat sources such as radiators, heat registers,stoves,  
or other apparatus (including amplifiers) that produce heat.  
9. Do not defeat the safety purpose of the polarized or grounding-type plug.  
Apolarized plug has two blades with one wider than the other.  
Agrounding type plug has two blades and a third grounding prong.  
The wide blade or the third prong are provided for your safety.  
If the provided plug does not fit into your outlet, consult an electrician for  
replacement of the obsolete outlet.  
10. Protect the power cord from being walked on or pinched particularly at plugs,  
convenience receptacles and the point where they exit from the apparatus.  
11. Only use attachment/accessories specified by the manufacturer.  
12. Use only with the cart, stand, tripod, bracket or table specified by the manufacturer  
or sold with the apparatus. When a cart is used,  
use caution when moving ..  
the cart/apparatus combination to avoid injury from tip-over.  
13. Unplug this apparatus during lightning storms or when unused for  
long periods of time.  
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus  
has been damaged in any way,  
such as power-supply cord or plug is damaged, liquid has been spilled or objects  
have fallen into the apparatus the apparatus has been exposed to rain or moisture does not  
operate normally or has been dropped.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTRUCTION MANUAL………………………………………………………………………………  
2
“WARNING - To reduce the risk of fire or electric shock, do not expose the  
apparatus to rain or moisture.”  
“The apparatus shall not be exposed to dripping or splashing and no objects filled  
with liquids, such as vases, shall be placed on the apparatus.”  
This symbol is intended to alert the user to the presence of uninsulated :  
dangerous voltage” with in the product’s enclosure that may be of  
sufficient magnitude to constitute arisk of electric shock to persons.  
This symbol is intended to alert the user to the presence of important  
operating and maintenance(servicing) instructions in the literature  
accompanying the appliance.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3 ……………………………………………………………………………… INSTRUCTION MANUAL  
CAUTIONk  
The power supply cord is used as the main disconnect device, ensure that the  
socket-outlet is located/installed near the equipment and is easily accessible.  
ATTENTIONN  
Le cordon d`alimentation est utillsé comme interrupteur général. La prise de  
courant doit être située ou installée à proximité du matériel et être facile  
d`accès  
NEVER REMOVE THE BACK COVER  
Removal of the back cover should be carried out only by qualified personnel.  
DO NOT USE IN HOSTILE ENVIRONMENTS  
To prevent shock or fire hazard, do not expose the unit to rain or moisture.  
This unit is designed to be used in the office or home. Do not subject the unit to vibrations,  
dust of corrosive gases.  
KEEP IN A WELL VENTILATED PLACE  
Ventilation holes are provided on the cabinet to prevent the temperature from rising.  
Do not cover the unit or place anything on the top of unit.  
AVOID HEAT  
Avoid placing the unit in direct sunshine or near a heating appliance.  
TO ELIMINATE EYE FATIGUE  
Do not use the unit against a bright back ground and where sunlight or other light sources will  
shine directly on the monitor.  
BE CAREFUL OF HEAVY OBJECT  
Neither the monitor itself nor any other heavy object should rest on the power cord.  
Damage to a power cord can cause fire or electrical shock.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTRUCTION MANUAL …………………………………………………………………………… 4  
NOTE  
This equipment has been tested and found to comply with the limits for a Class B digital device,  
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable  
protection against harmful interference in a residential installation.  
This equipment generates, uses and can radiate radio frequency energy and, if not installed and  
used in accordance with the instructions, may cause harmful interference to radio  
communications. However, there is no guarantee that interference will not occur in a particular  
installation.  
If this equipment does cause harmful interference to radio or television reception which can be  
determined by turning the equipment off and on, the user is encouraged to try to correct the  
interference by one or more of the following measures.  
- Reorient or relocate the receiving antenna.  
- Increase the separation between the equipment and receiver.  
- Connect the equipment into an outlet on a circuit different from that to which the receiver  
is connected.  
- Consult the dealer or an experienced radio, TV technician for help.  
- Only shielded interface cable should be used.  
Finally, any changes or modifications to the equipment by the user not expressly approved by  
the grantee or manufacturer could void the users authority to operate such equipment.  
DOC COMPLIANCE NOTICE  
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital  
apparatus set out in the radio interference regulation of Canadian Department of  
communications.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5 ……………………………………………………………………………… INSTRUCTION MANUAL  
A. BOTTOM PANEL CONTROL  
1
3
4
2
5
6
8
7
10  
11  
9
1. DC 12V IN  
2. D-SUB IN  
PC Signal Input  
3. VIDEO 1(AV1) IN  
Composite signal Input for AV1  
4. VIDEO 1(AV1) OUT  
Video looping output for AV1  
5. VIDEO 2(AV2) IN  
Composite signal Input for AV2  
6. VIDEO 2(AV2) OUT  
Video looping output for AV2  
7. 8 AUDIO IN (L+R)  
Stereo Audio Signal Input  
9. S-VIDEO (Y/C) IN  
Y/C separated signal input  
10. S-VIDEO (Y/C) OUT  
Y/C separated signal looping output  
11. PC STEREO IN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTRUCTION MANUAL…………………………………………………………………………… 6  
B. REMOTE CONTROLLER  
1. POWER(  
)
Turns the power ON or OFF. There will be a few  
seconds delay before the display appears.  
2. SOURCE  
Select pc or video( AV1 / AV2 / S-Video / PC ) sources.  
3. APC (Auto Picture Control)  
Select picture mode.  
4. ACC (Auto Colour Control)  
Select Colour mode.  
5. AV1  
Select AV1 mode  
6. AV2  
Select AV2 mode  
7. S-VIDEO  
Select S-VODEO mode  
8. PC  
Select PC mode  
9. AUTO  
Auto geometry adjustment in PC Source.  
10. MUTE  
Mute the sound.  
11. MENU  
Activates and exits the On Screen Display.  
12. EXIT  
Exit the On Screen Display.  
13. VOL(  
)
Increases or decreases the level of audio volume.  
14. UP/DOWN  
Move to OSD menu.  
15. ENTER  
Accepts your selection or displays the current mode.  
16. INFO  
Input mode information Display.  
17. STILL  
Pause the picture.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7 …………………………………………………………………………… INSTRUCTION MANUAL  
1
2
3
4
5
6
7
8
9
1. SOURCE  
Select input source, and move the previous menu.  
2. MENU  
Activates and exits the On Screen Display.  
This button can also be used to move previous menu or status.  
OSD MENU(MAIN) : Custom, Picture/Sound,Setup  
3/4. AUTO//  
This button allows user to enter the sub-menu of the activated function  
AUTO: Auto geometry adjustment in PC Source.  
5/6.  
VOL  
Adjust the volume / Adjust menu settings.  
7. IR Sensor  
Remote controller sensor.  
8. POWER ON/OFF(  
)
Turns the power ON or OFF. There will be a few seconds delay before the display appears.  
The power LED(next to the power switch) lights with green when the power is turned ON.  
The power is turned off by pressing the power switch again and the power LED goes Red.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTRUCTION MANUAL…………………………………………………………………………… 8  
OSD MENU DESCRIPTION  
A: CUSTOM MENU (Only Video mode)  
Press the MENU button and then up() / down() button to select the Custom menu.  
Press the up() / down() button to select Custom sub menu.  
Press the left(◀) /right() button to adjust picture setting.  
Press the MENU button to save.  
Brightness: Increase or decrease the intensity of the image.  
Contrast: Increase or decrease the intensity (lightness or dimness) of the image.  
Color: Increase or decrease the colour of the picture.  
Tint: Increase or decrease the tint of the picture.  
Sharpness: Increase or decrease the sharpness of the picture.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9 …………………………………………………………………………… INSTRUCTION MANUAL  
A: CUSTOM MENU (Only PC mode)  
Press the MENU button and then up() / down() button to select the Custom menu.  
Press the up() / down() button to select Custom sub menu.  
Press (◀) /right() button to adjust picture setting.  
Press the MENU button to save.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTRUCTION MANUAL…………………………………………………………………………… 10  
B. Picture / Sound Menu(Only Video mode)  
Press the MENU button and then up() / down() button to select the Picture / Sound.  
Press the right() or ENTER button.  
1. Picture Mode  
Press the up() / down() button to select the Picture Mode.  
Press the right() or ENTER button and then press up() / down() button to select the desire  
Picture Mode.  
Press the MENU button to save.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
11 …………………………………………………………………………… INSTRUCTION MANUAL  
2. Color Tone  
Press the up() / down() button to select the Color Tone.  
Press the (▶) or ENTER button and then up()/down() button to select the desired color tone.  
Press the MENU button to save.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTRUCTION MANUAL…………………………………………………………………………… 12  
3. Mute  
Press the up() / down() button to select the Mute.  
Press the (▶) or ENTER button and then up()/down() button to select the desired Mute.  
Press the MENU button to save.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
13 …………………………………………………………………………… INSTRUCTION MANUAL  
4. Volume  
Press the up() / down() button to select the Volume.  
Press (◀) /right() button to adjust Volume.  
Press the MENU button to save.  
5. PC (Only PC mode)  
Press the up() / down() button to select the PC  
Press the or ENTER button  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTRUCTION MANUAL………………………………………………………………………………14  
Press the up() / down() button to select PC sub menu  
Press the right() or ENTER button and then left (◀) /right() button to adjust PC setting.  
Press the MENU button to save.  
Auto Adjust: Auto geometry adjustment  
Phase: Adjust the number of horizontal picture elements.  
H. position: Move image horizontally on screen right or left.  
V. position: Move image vertically on screen up or down.  
Frequency: Adjust the vertical noise of screen image.  
C. SETUP MENU  
Press the MENU button and then up() / down() button to select the Setup menu.  
Press the right() or ENTER button.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
15 …………………………………………………………………………… INSTRUCTION MANUAL  
1.Reset  
Press ENTER button to select the reset  
Reset: Select to reset all setting to the factory default values.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTRUCTION MANUAL………………………………………………………………………………16  
2. Language  
Press the up() / down() button to select the Language menu.  
Press the right() or ENTER button.  
Press the up() / down() button to select language.  
Press the MENU button to save.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
17 …………………………………………………………………………… INSTRUCTION MANUAL  
3. OSD Tone  
Press the up() / down() button to select the OSD tone menu.  
Press the right() or ENTER button  
Press the up() / down() button to select the desire OSD Tone.  
Press the MENU button to save.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTRUCTION MANUAL………………………………………………………………………………18  
4. Blue Screen  
Press the up() / down() button to select the blue screen.  
Press the right() or ENTER button.  
Press the up() / down() button to select on or off.  
Press the MENU button to save.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
19 …………………………………………………………………………… INSTRUCTION MANUAL  
5. Key Lock  
Press the up() / down() button to select the key lock menu.  
Press the right() or ENTER button  
Press the up() / down() button select on or off  
Press the MENU button to save.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTRUCTION MANUAL………………………………………………………………………………20  
Wall mountable using two methods:  
1) Using the 200 mm pre-cut holes  
2) Using the VESA standard wall mount design and the 100mm hole pattern on the back panel  
to install the LCD monitor to the wall.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
21 …………………………………………………………………………… INSTRUCTION MANUAL  
PIN ASSIGNMENTS  
ACCESSORY  
1. POWER CORD  
2. USER’S MANUAL  
3. PC cable  
4. Adaptor  
5. Remote Control  
6. Batteries  
7. Wall mount (Option)  
8. Rack mount (Option)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTRUCTION MANUAL…………………………………………………………………………… 22  
This monitor features a power management system to “power down” upon receipt of the  
VESA DPMS(The display power management signaling) from a VESA DPMS video card.  
The VESA DPMS-compliant video card performs this signaling system through not sending  
horizontal, vertical, or sync signal.  
This monitor enters an appropriate mode through identifying each of the three modes of the  
signaling system.  
POWER CONSUMPTION  
MODE  
ON  
POWER CONSUMPTION  
< 50W  
< 11W  
< 11W  
< 8.5W  
STANDBY  
SUSPEND  
ACTIV OFF  
LED INDICATOR  
The power management feature of the monitor is comprised of four stages: On(Green),  
Standby, Suspend, Active off(Green on/off 1 sec) and Unsupported mode(Green).  
MODE  
ON  
LED COLOR  
MONITOR OPERATION  
Normal Operation  
GREEN  
STANDBY  
SUSPEND  
ACTIV OFF  
GREEN  
ON/OFF  
1 SEC  
Screen blanks after preset idle time  
And some electronic circuits or all  
Circuitry in the monitor shut down.  
UNSUPPORTES  
MODE  
Normal operation but the on screen  
Display will show error massage  
GREEN  
GREEN OFF  
Not Operation  
POWER OFF  
Download from Www.Somanuals.com. All Manuals Search And Download.  
23 …………………………………………………………………………… INSTRUCTION MANUAL  
17“  
19“  
17˝ Diagonal AM-TFT(Active-Matrix)  
19˝ Diagonal AM-TFT(Active-Matrix)  
Pixel pitch(mm) : 0.264(H) x 0.264(V) Pixel pitch(mm) : 0.294(H) x 0.294(V)  
LCD- Type  
BRIGHTNESS: 300cd/(Typical)  
CONTRAST RATIO: 1000:1(Typical)  
RESPONSE TIME: 5msec(Typical)  
BRIGHTNESS: 300cd/(Typical)  
CONTRAST RATIO: 800:1(Typical)  
RESPONSE TIME: 5msec(Typical)  
RESOLUTION  
(H x V)  
1280X1024 @60Hz  
HORIZONTAL: 31- 64KHz  
VERTICAL: 56-75Hz  
FREQUENCY  
VIDEO(2ch input 1.0Vp-p,  
75terminated, loop-through out)  
SYNC(Separate TTL Level)  
INPUT SIGNAL  
S-VIDEO(1ch input (Y/C) ,  
loop-through out)  
AV(composite) Sound in  
PC Stereo Sound  
ACTIVE DISPLAY  
AREA (W x H)  
337.9 mm X 270.3 mm  
376.32mm X 301mm  
PACKING  
DIMENSIONS  
(W x D x H)  
436mm X 476mm X 225mm  
490mm X 506mm X 225mm  
Net Weight : 6.2Kg  
Net Weight : 6.61Kg  
WEIGHT  
Gross Weight : 7.8Kg  
Gross Weight : 8.43Kg  
ELECTRICAL  
RATINGS  
DC 12V/ 3A  
DC 12V/ 3.5A  
▶▶ NOTE :  
Technical specifications are subject to change without notice.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTRUCTION MANUAL…………………………………………………………………………… 24  
Going to Sleep”  
message on screen  
WEEE Symbols  
Correct Disposal of This Product  
(Waste Electrical &Electronic  
Equipment)  
(Applicable in the European Union and other  
European countries with separate collection systems)  
This marking shown on the product or its literature,indicates  
that it should not be disposed with  
other household wastes at the end of its working life.To  
prevent possible harm to the  
environment or human health from uncontrolled waste  
disposal,please separate this from other  
types of wastes and recycle it responsibly to promote the  
sustainable reuse of material resources.  
Household users should contact either the retailer where  
they purchased this product,or their  
local government office,for details of where and how they  
can take this item for environmentally  
safe recycling.  
Business users should contact their supplier and check the  
terms and conditions of the purchase  
contract.This product should not be mixed with other  
commercial wastes for disposal.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Taiwan - Headquarter Office  
12F, No.79 Sec.1 Shin-Tai Wu Road,  
Hsi-Chi, Taipei, Taiwan  
China - Beijing Office  
Room 609,Technology Trade Building.  
Shangdi Information Industry Base,  
Haidian District,Beijing China  
Tel: +86-10-62971096  
Tel: +886-2-26982334  
Fax: +886-2-26982380  
Fax: +86-10-62971423  
Europe - Germany Office  
Albert-Einstein-Strasse 1,  
D-46446 Emmerich, Germany  
Tel: +49-2822-9394-0  
Japan Office  
1809 WBG Marive East 18F,  
2-6 Nakase, Mihama-ku,  
Chiba City 261-7118, Japan  
Tel: +81-43-212-8188  
Fax: +81-43-297-0081  
Fax: +49-2822-939495  
USA - California Office  
1801 Highland Ave. Unit A  
Duarte, CA 91010 ,U.S.A  
Tel: +1-626-844-8888  
USA - New York Office  
415 Oser Ave Unit S  
Hauppauge, NY 11788  
Sales: +1-631-436-5070  
Fax: +1-631-436-5027  
Fax: +1-626-844-8838  
Ihr  
entwickelt und hergestellt mit qualitativ  
hochwertigen Materialien und  
Komponenten, die recycelt und wieder  
verwendet werden können.  
EverFocus  
Produkt  
wurde  
Your EverFocus product is designed  
and manufactured with high quality  
materials and components which can  
be recycled and reused.  
This symbol means that electrical and  
electronic equipment, at their end-of-  
life, should be disposed of separately  
from your household waste.  
Dieses  
Symbol  
bedeutet,  
dass  
elektrische und elektronische Geräte  
am Ende ihrer Nutzungsdauer vom  
Hausmüll getrennt entsorgt werden  
sollen.  
Please, dispose of this equipment at  
your  
local  
community  
waste  
Bitte entsorgen Sie dieses Gerät bei  
collection/recycling centre.  
Ihrer  
örtlichen  
kommunalen  
In the European Union there are  
separate collection systems for used  
electrical and electronic product.  
Please, help us to conserve the  
environment we live in!  
Sammelstelle oder im Recycling Centre.  
Helfen Sie uns bitte, die Umwelt zu  
erhalten, in der wir leben!  
P/N: L39ME0187 Rev.0  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Eizo Computer Monitor FS2331 User Manual
Eizo Computer Monitor L551 User Manual
Faber Ventilation Hood 630006508 User Manual
Festool Sander PI570789 User Manual
Fisher Paykel Freezer RB365 User Manual
FujiFilm Digital Camera 2600 Zoom User Manual
GE Caller ID Box 2 9079 User Manual
Gemini Musical Instrument UMX 3 User Manual
Genz Benz Portable Speaker Intro 90 User Manual
Global Machinery Company Brush Cutter 25CC User Manual