Upright Vacuum Cleaner
Household Type
Owner’s Guide
4670 Series
Index
Important Safeguards ........... 2
Service Information............... 4
Assembly ........................... 5-6
Use........................................ 7
Thermal Cut Off .............. 4 & 7
Accessories........................... 8
Dirt Alert................................ 9
Brush Roll ........................... 10
Brush Roll Belt ............... 10-11
Dust Bag ........................ 11-12
Hose Blockage ............... 13-14
Filters .................................. 15
HEPA Filter.......................... 15
Light Bulb ............................ 16
Problem Solving .................. 18
Customer Order Form......... 19
Warranty.............................. 21
IMPORTANT
Do not return this
product to the store.
For assembly problems or
questions contact: Eureka’s
Customer Service Division toll
free at 1-800-282-2886*, 7 a.m.
to 8 p.m., Central Standard
Time, Monday through
Saturday.
For replacement of broken
or missing items to be
shipped direct to you, call
1-800-438-7352*, 8 a.m. to
4:45 p.m., Central Standard
Time, Monday through Friday.
*En Mexico llame al 5670-6169
Download from Www.Somanuals.com. All Manuals Search And Download.
CONSEILS DE SÉCURITÉ
Lors de l’utilisation d’un appareil électrique, quelques précautions élémentaires doivent être observées, incluant les suivantes:
LISEZ TOUTES LES INSTRUCTIONS AVANT D’UTILISER VOTRE ASPIRATEUR.
AVERTISSEMENT
Pour réduire le risque de feu, de choc électrique, ou de blessure:
• Ne pas utiliser à l’extérieur ou sur des surfaces mouillées.
• Fermez le commutateur et débranchez l’appareil lorsque vous ne l’utilisez pas ou avant le nettoyage ou l’entretien.
• Ne permettez pas qu’il soit utilisé comme jouet. Une attention particulière est nécessaire lorsque utilisé par ou prés d’un
enfant.
• Suivez les recommandations d’utilisation de ce manuel. Utilisez uniquement les accessoires recommandés par le fabriquant.
• Ne pas utiliser si le cordon ou la fiche sont endommagés. Si l’aspirateur ne fonctionne pas comme il le devrait, s’il a été
échappé, s’il est endommagé, s’il a été laissé à l’extérieur ou échappé dans l’eau, retournez-le à un centre de service
avant d’utiliser.
• Ne pas le tirer ou le transporter par le cordon, ne pas utiliser le cordon en guise de poignée. Ne pas fermer une porte sur
le cordon ou tirer le cordon sur des coins ou bordures pointus. Ne pas circuler sur le cordon avec l’aspirateur. Tenir le
cordon à distance des surfaces chauffantes.
• Ne pas utiliser des rallonges ou des prises qui n’ont pas de capacité suffisante pour transporter le courant.
• Fermer tous les contrôles avant de débrancher.
• Ne pas débrancher en tirant sur le cordon. Pour débrancher, tenez la fiche et non le cordon.
• Ne pas manipuler la fiche ou l’aspirateur avec les mains mouillées.
• Ne pas rien insérer dans les ouvertures. Ne pas utiliser si des ouvertures sont bloquées; assurez-vous qu’elles soient
dégagées de poussière, mousse, cheveux ou toute autre chose qui pourrait réduire le passage de l’air.
• Cet aspirateur créé de la succion et contient un rouleau-brosse tournant. Tenir les parties mobiles et les ouvertures loin
des cheveux, du linge, des doigts et de toute partie du corps.
• Ne pas mettre l’aspirateur sur les meubles ou sur les escaliers car le rouleau-brosse peut faire des dommages. Placer
l’aspirateur sur le plancher avec le manche en entreposage position temps que les accessoires sont en usage.
• Ne pas ramasser des objets qui brûlent ou fument comme les cigarettes, allumettes ou cendres chaudes.
• N’utilisez pas sans le sac de poussière en place.
• Les poulies du courroie peuvent devenir chaudes pendant l’utilisation normale. Pour prévenir des brûlures, évitez de
touché la poulie du courroie lorsque vous réparez la courroie.
• Portez une attention particulière lorsque vous nettoyez les escaliers.
• Ne pas utiliser pour ramasser des liquides inflammables ou combustibles comme de l’essence: Ne pas utiliser dans les
endroits où ces liquides pourraient être présents.
• Entreposez votre aspirateur à l’intérieur dans un endroit propre et sec.
• Maintenez un bon éclairage à l’endroit où vous travaillez.
• Débrancher les appareils électrique avant de les balayer.
CONSERVEZ CES INSTRUCTIONS
3
Download from Www.Somanuals.com. All Manuals Search And Download.
To reduce the risk of electric shock, this appliance has a polarized plug (one blade wider than the other). This plug will fit
in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a
qualified electrician to install the proper outlet. Do not change the plug in any way.
Afin de réduire le risque de choc électrique, cet appareil est muni d’une fiche polarisée (une des lames est plus large).
Cette fiche ne peut être insérée dans une prise polarisée que d’une seule façon. Si la fiche ne peut être insérée dans la prise,
retourner la fiche. Si la fiche ne peut toujours pas être insérée dans la prise, faire installer une prise adéquate par un
électricien qualifié. Ne pas modifier la fiche.
GENERAL INFORMATION
The cleaner is designed to pick up dirt and dust particles. Avoid picking up hard or sharp objects with the cleaner to prevent
bag tears, hose clogs, and fan blade breakage with subsequent motor damage.
Service Information
The instructions in this booklet serve as a guide to routine maintenance. For additional service information telephone our toll
free number for the nearest Eureka Authorized Warranty Station. You should know the model, type and serial numbers
when you call:
USA: 1-800-282-2886
Mexico: 5670-6169
Canada: 1-800-282-2886
If you prefer, you can write to The Eureka Company, Service Division, 807 North Main Street, Bloomington, Illinois 61701,
USA. In Canada write to The Eureka Company, 866 Langs Drive, Cambridge, Ontario N3H 2N7. Refer to The Eureka Limited
Warranty for complete service information.
DO NOT OIL the motor or the brush roll at any time. The bearings are permanently lubricated and sealed.
Rating Plate
The model, type, and serial numbers are indicated on the
MODEL
VOLTS
TYPE
SERIAL NO.
HERTZ
rating plate located on the underneath side of the cleaner.
For prompt and complete service information, always refer
to these numbers when inquiring about service.
AMPS.
SERVICE INFORMATION: 1-800-282-2886
Model & Type__________________________
Serial No. _____________________________
THE EUREKA COMPANY
BLOOMINGTON, ILLINOIS 61701
Thermal Cut Off
This vacuum cleaner has a special thermostat that protects the cleaner in case of motor overheating. If the cleaner suddenly
shuts off, push the switch pedal once and unplug the cleaner. Check the cleaner for a possible source of overheating such as
a full bag, a blocked hose or clogged filter. If these conditions are found, fix them and wait at least 30 minutes before
attempting to use the cleaner. After the 30 minute period, plug the cleaner back in and turn on the switch. If the cleaner still
does not run, then take it to a Eureka Authorized Service Center for repair.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO ASSEMBLE
CAUTION: Assemble the cleaner before using.
CAUTION: Moving parts, stay clear of brush roll when plugging in.
NOTE: Features may vary by model yet all parts assemble the same.
Step A Attach Hose
Step C Install Dust Bag (Some models may
have bag installed.)
6
6
Hose Adapter
Bag Compartment
Tube Hole
7
Bag
Collar
5
Bag
Side
8
1. To attach hose, insert the hose adapter into the bag
compartment tube hole.
5. Fold sides on new paper bag below bag collar.
6. Align bag collar hole and notch with hose tube.
7. Place rear of bag collar on ledges. Push back and
rotate upward until firmly in place.
Step B Attach Handle
CAUTION: Do not catch cord under handle.
8. Make sure collar snaps into position and hose tube
is securely inserted into bag collar hole. Tuck bag
into bottom and along sides.
9. Align front cover tabs and close cover. Make sure
paper bag is not caught under the front cover.
Step D Attach Bag Cover
Push to
latch
2
Push
Groove
2. From rear of cleaner, align handle with groove and
slide onto cleaner. If necessary, use thumb and finger
pressure to slide handle into position.
10. Place front cover by aligning tabs at bottom of front
cover into slots on cleaner. Pivot front cover toward
cleaner and push firmly, gripping at the top of the
bag cover, until latch is secure.
3. Attach handle with two 5/8 inch screws in the assembly
®
packet. Use either a slotted or Phillips head
screwdriver.
4. Lift up on the hose adapter to be sure it is secured.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Step E Store Hose and Accessories
Step F Check Disposable Dust Bag
Optional Dusting Brush and
Upholstery Tool can be
stored in place of the
combination tool on handle
pegs.
Front Cover
Latch
Combination
Tool
8
Hook
Handle
Pegs
10
Crevice
Tool
Carrying
Handle
Extension
Wand or
Wands
8. Remove front cover by pulling out on the front cover
latch and lifting the front cover upward and out.
HEPA Filter
(on some
models)
9
Hose
Adapter
Hose
Retainer
Paper Bag Collar
9. Check to be sure the paper bag collar is secure with
the hose adapter inside the paper bag collar.
Step G Store Electrical Cord
10. Replace front bag cover.
11
11. You will find your cord retainer on the handle above
the upper cord hook. Firmly push the electrical cord
down into the cord retainer. This will place the cord
out of the way the next time you vacuum.
Cord
Retainer
12
Cord
Hook
12. Next wind the cord around the two cord hooks on
the left side of cleaner.
NOTE: For easier access to bag compartment, when
you store the electrical cord use a figure 8
pattern.
13. Secure the plug to the cord to prevent unwinding.
12
Cord
Hook
6
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO USE
The upright vacuum cleaner design allows use on multiple types
of carpeting and on upholstery or bare floors with attachments.
When using the attachment tools, place the handle in the
upright position. Do not place cleaner on furniture or steps
as the brush roll may cause damage.
2
Cord Retainer
1. Adjust cleaner height setting knob to lowest position for
maximum cleaning. Adjust to a higher setting to make
pushing easier. For ease in moving the adjustment knob,
place handle in operating position and tilt cleaner back to
remove weight from front wheels.
2. Unwind all of the electrical cord. Located above the cord
hook is the cord retainer. Firmly push the electric cord down
into the cord retainer. Using the cord retainer will keep the
electric cord up, out of the way while vacuuming.
3
3. Plug electrical cord into outlet.
4. Step on handle release. Pull handle back to a comfortable
position.
5. Push On or Off power switch.
Store or
Use Attachments
ON/OFF
5
Handle
4
Release
Use
Clean
Under
Handle
Release
1
3
Cleaner Height Setting
WARNING: Avoid injury. Keep loose clothing, hair, fingers,
and all other parts of body away from any
moving part (such as the revolving brush).
Turn off the switch and unplug the cleaner
before changing the cleaner height setting.
Thermal Cut Off
This cleaner has a special thermostat that protects the
cleaner in case of motor overheating. If the cleaner
suddenly turns off, follow this procedure:
The front of the cleaner has an adjustment that raises or lowers
the cleaner base to match the type of carpet. With
the cleaner cord unplugged, set the adjustment
to lowest setting for maximum cleaning. If the
cleaner is difficult to push, move adjustment to
next highest setting until cleaner is comfortable
to push. The brush roll must reach the carpet for
effective cleaning.
1. Push on/off pedal once.
2. Unplug cleaner.
3. Check for source of overheating problem (i.e. full bag,
clogged hose or clogged filter).
4. If a full bag, clogged hose or clogged filter is found,
replace the bag, unclog the hose or replace the filters.
5. Wait at least 30 minutes before attempting to reuse the
cleaner.
NOTE: For ease in moving the adjustment knob, place
handle in operating position and tilt cleaner back
to remove weight from front wheels.
6. After 30 minute cool down period, plug the cleaner in
and push the switch pedal. The cleaner should turn on.
NOTE: When handle is in upright position, brush roll is
lifted off carpet. This is normal. Height adjustment
will not change brush roll level until the cleaner’s
handle is moved into the operating position.
7. If the cleaner still does not operate, take it to any Eureka
Authorized Service Center for repair.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Dusting Brush is for furniture, blinds, books, lamp shades,
shelves. (On some models.)
How To Use Accessories
NOTE: Do not place cleaner on furniture or
steps as the brush roll may cause
damage. Place cleaner on floor with
the handle in storage position while
using accessories.
Depending on which cleaner you purchased, you
can have any combination of the following
accessories.
Dusting Brush
Upholstery Nozzle is for curtains, draperies, cushions,
fabrics. (On some models.)
1. Remove hose from rear of cleaner.
2. Place desired accessory onto end of hose.
Always work with the cleaner below you,
pulling hose from side of cleaner; not the back
or the front of the cleaner.
Upholstery
Nozzle
Combination Tool gives two types of cleaning tools. (On some
models.)
• Use brush side to dust furniture, blinds, books, lamps, shelves.
• Use upholstery side for curtains, draperies, cushions, fabrics.
Dusting
Side
Upholstery
Side
Crevice Tool cleans corners, baseboards, between cushions.
Crevice Tool
Extension Wands (Some models use 1 wand)
Nested extension Wands to add reach.
.
.
• Grasp both wands near ridges.
• Pull apart.
.
8
• Turn ridge end to center.
• Push wands together.
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance of Dirt Alert Feature (On some models)
The dirt alert sensor uses infra-red technology to indicate whether or not floors are clean. When debris breaks the light
beam, the red light comes on indicating additional cleaning is needed in this area. If there is no break in the light beam, the
floor is clean and no light will come on.
When using your new vacuum you may be cleaning deep down hidden dirt missed by your old vacuum causing the light to
stay red longer. With frequent cleaning, after the first few times you use your new Eureka vacuum, the red light should go
on less.
NOTE: The dirt alert feature is not intended to be used for above the floor cleaning with attachments.
The red light indicates dirt, dust, etc. is still being removed
from the area being cleaned.
How to Check the Dirt Alert Sensors
To check if dirt sensor is working properly.
1. While the red light is on, tip the vacuum backwards on rear
wheels, lifting the brush roll off the carpet a couple of inches.
2. After a few seconds the red light should turn off.
HINT: New carpeting has loose carpet fibers which will trip
the red light sensor beam.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO MAINTAIN
The instructions in this booklet serve as a guide to routine maintenance. To avoid unnecessary service calls, check the bag,
belt, and brush roll often.
Brush Roll
The brush roll turns as it sweeps and combs the carpet nap. Remove hair and threads from the brush roll so it continues
brushing the carpet. To maintain the most efficient cleaning, the bristles must touch the carpet. To test the bristle length,
hold a ruler against the underneath side of the cleaner. If the bristles no longer touch the ruler, replace the brush roll.
Brush Roll Belt
The brush roll belt turns the brush roll to agitate, sweep, and comb the carpet nap. Check the belt regularly to be sure it is
in good condition. Replace the belt if it stretches, cracks or loses tension. Cut away any hair or threads wound around the
brush roll or the belt pulley because the buildup could cause the belt to rotate unevenly.
How To Replace Brush Roll Belt
NOTE: Turn off the switch and unplug the electrical cord before replacing belt. Belt pulleys can become hot during
normal use. To prevent injury, avoid touching the motor pulley when checking the belt.
4
Motor
Pulley
Belt
Brush
Roll
2
1
2
3
1. Lower handle to floor to change belt.
3. Lift left end of brush roll.
4. Remove and discard belt.
2. Loosen, but do not remove, two screws to release
hood. Lift hood to remove.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Disposable Dust Bag and Filters
The disposable dust bag plays a very important role in
the efficiency of a vacuum cleaner. The purpose of the
paper bag is to trap dirt. As the bag traps dirt, it must also
be porous enough to allow air to pass on through. If the
paper bag becomes clogged, no air can pass through the
cleaner and no cleaning can take place regardless of how
powerful the unit. Change the dust bag and check the filters
frequently. Some fine particles can restrict airflow very
quickly and will decrease performance even before the
bag appears to be full.
5
When vacuuming carpet fresheners or cleaners, powder,
plaster dust, or similar fine substances, the bag and filters
may require more frequent maintenance.
5. Place new belt around motor pulley.
6
7
Left side view
6. Place belt around brush roll pulley.
7. Align left end cap with square in base. Push end cap
into place; see left side view.
8
8. Pull right side of brush roll to stretch belt. Secure right
end cap into base.
9
9. Rotate brush roll to seat belt.
10. Replace the hood. Make sure hood front is behind
furniture guard. Hood should seat onto self-locating
screw tabs.
11. Tighten screws.
Use GENUINE EUREKA replacement belt, 54312. Look
for the GENUINE EUREKA product symbol.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
How To Replace Bags–Style AA Filteraire
NOTE: Turn off the switch and unplug the electrical cord before changing dust bag. Never operate the vacuum
cleaner without the dust bag or the filter.
NOTE: Style AA Filteraire bags must be used to maintain HEPA grade filtration and prolong the life of the HEPA
filter. We recommend using only Genuine Eureka Filteraire Bags, part number 58623.
NOTE: Models without HEPA filter option, may use StyleAA bags, part number 58236, rather than Style AA Filteraire.
It may be more convenient to lower the handle to the floor before changing the bag.
To Remove Bag:
Front Cover
Latch
B
|
A
Front
Cover
A. Remove front cover by unlatching the front cover latch
and lifting the front cover upward and out.
B. Remove left side of bag collar from bag collar
retainer. Grasp bag collar; pull down slightly and
out to remove bag.
F
To Replace New Bag:
E
C. Fold sides on new paper bag below bag collar.
D. Align bag collar hole and notch with hose tube.
E
E. Place rear of bag collar on ledges. Push back and
rotate upward until firmly in place.
F. Make sure collar snaps into position and hose tube is
securely inserted into bag collar hole. Tuck bag into
bottom and along sides.
C
D
Bag
Side
G. Align front cover tabs and close cover. Make sure paper
bag is not caught under the front cover.
Bag Collar
12
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Check and Clear Hose Blockages
Low suction or poor pickup may be due to a blockage in the vacuum cleaner.
1. Remove hose and check suction at end of hose - if little or
no suction, check disposable dust bag. Change if needed.
If no improvement proceed to step 2.
NOTE: Turn off the switch and unplug the electrical cord
before clearing hose.
2. Disconnect the hose adapter from the unit. Press adapter
button on hose adapter and lift up.
1
Check for any obstructions that may be in the hose. Any
obstructions can be removed by using a blunt instrument to
clear the hose. Flexing the hose may help loosen the clog.
3. Reinstall the hose after clearing the clog. Insert the hose
adapter button into the bag compartment tube hole. Lift up
on the hose adapter to be sure it is secured.
1. Remove hose and check suction at end of
hose.
NOTE: If no improvement in performance on carpet, proceed
to following page.
Hose Adapter
Button
Hose Adapter
Button
Bag Compartment
Tube Hole
Bag Compartment
Tube Hole
3
2
2. Disconnect Hose.
3. Reinstall the hose.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Check and Clear Blockages in Base
2
1
2
2. Remove the hood by loosening the two screws located
on the top of the hood and lifting upward.
1. Remove the attachment hose from the lower hose
retainer and look into the hose retainer for any
obstructions. Proceed to Step 2 to check for any other
blockages.
Upright position
Operating Position
s
Lowest Position
for cleaning
under furniture
Handle
Release
3. Step on the handle release and lower the handle all
the way to the floor.
4. Check for blockages in the brush roll area and remove
any obstructions found there. The base hose can be
cleared of any blockage by using a blunt instrument.
5. After the blockage is removed, replace the hood and
tighten the two hood screws (see Fig. 2). Raise the
handle to the upright position (see Fig. 3) and replace
the hose into the lower hose retainer.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
HEPA Cartridge Filters (Only for models
with HEPA.)
HEPA/Micron Filters in Filter Frame
(Only for models with HEPA/Micron filter frame)
Check the HEPA filters with each disposable dust bag
change. Replace twice a year or after every six bag
changes.
Check the HEPA/Micron filter with each disposable
dust bag change. Replace twice a year or after every
six bag changes.
Filter Frame plus
filter (depending
on your vacuum
model)
Latch
Filter cartridge
(One complete
unit)
Filter
Frame
Filter
Tabs
To remove HEPA cartridge filters
1. Push down latch and pull filter cassette back.
2. Then lift filter up and remove.
To remove HEPA/Micron filters from
filter frame.
1. Push down latch and pull filter frame back.
2. Then lift filter up and out of filter frame.
To replace HEPA cartridge filters
1. Place bottom tabs of filter cassette into slots.
2. Rotate filter toward cleaner.
To replace HEPA/Micron filters into
filter frame.
3. Push upward on the latch to secure into place.
1. Place new filter in filter frame. Place bottom tabs
of filter frame into slots.
NOTE: To have the benefit of a sealed HEPAsystem,
you must use one of the HEPA cartridge
filter systems.
2. Rotate filter frame toward cleaner.
3. Push upward on the latch to secure into place.
Motor Filter
Check the motor filter with each disposable dust bag
change. Clean or replace as needed.
Back Ledge
3
Filter Retainer
3
To Clean Motor Filter
1. Remove filter from inside bag compartment, lower
1 and 3
left side.
2. Shake filter to remove excess dust. If necessary, the
filter can be cleaned by vacuuming with another
cleaner.
3. Reinstall filter with stiff/printed side down. Slide
under back ledge and filter retainer. Install with
colored/smooth side down.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Micron and HEPA Exhaust Filters (Only
for models with the exhaust filter door)
Change micron or HEPA exhaust filter every 3
months.
To Replace Micron or HEPA Exhaust
Filter
Exhaust
Filter
Door
1. Lower the handle. Open exhaust filter door; push
toward the left side.
Micron or
HEPA
2. Grasp filter and pull out.
Filter
3. Push new filter into cleaner, smooth side facing out .
4. Close exhaust filter door; push toward right side.
Exhaust Filter
Door
2
.
3
Replace all filters with genuine Eureka replacement
filters.
HOW TO MAINTAIN (continued)
How To Change Light Bulb (Only for models with
a headlight)
NOTE: Turn off the power switch and disconnect the
electrical cord before changing light bulb.
1. Lower handle. Remove two screws from lens cover.
2. Pull lens cover from cleaner.
3. Pull light bulb and socket toward front.
4. Push light bulb into socket; turn to release.
5. Place new light bulb into socket; turn to secure.
1
6. Push light bulb and socket back so bulb will not touch
lens cover.
7. Replace lens cover.
8. Secure with two screws.
4
Use 15 watt replacement light bulb, part
number 48815.
3
5
16
Download from Www.Somanuals.com. All Manuals Search And Download.
STAIR CLEANING HOSE (Only on Certain Models)
WARNING: Never position any cleaner on the stairs as this could damage the carpet.
Some models will come complete with an extra bonus hose which is ideal for cleaning stairs.
HOW TO ASSEMBLE AND USE
WARNING
Always work with the cleaner below you, pulling
hose from side of cleaner; not the back or the front of
the cleaner. Ensure it is positioned sideways up against
the bottom step.
Step 1 - Remove the hose attached to the cleaner.
Step 2 - Connect the hose cuff to the end of the
bonus hose.
NEVER STAND ANY CLEANER ABOVE YOU.
Step 3 - You are ready to clean your stairs.
NEVER POSITION ANY CLEANER ON THE
STAIRS AS THIS COULD DAMAGE THE CARPET.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
PROBLEM SOLVING
NOTE: Turn off the switch and unplug the electrical cord before servicing.
PROBLEM
CAUSE
SOLUTION
Motor will not start.
Electric Plug
Push plug securely into outlet.
Try another outlet.
3
Check circuit breaker.
Motor suddenly stops.
Thermal Cut Off
Refer to page 7.
3
3
Does not clean the carpet or
floor.
Disposable Dust Bag
and Filter(s)
Change the bag. Hint: If picking up fine dust, the bag
may not look full, but a fine substance tends to reduce
suction when it blocks the airflow through the paper bag
and filter(s). Make sure the dust bag is installed properly.
Make sure bag cover is installed properly.
Belt
Brush Roll
Replace a cut, loose or out of shape belt.
Clean hair and thread from bristles and end cap area.
Replace brush roll if bristles are worn.
3
3
Hose
Remove any clogs from the hose that restrict the airflow.
3
3
No suction at the end of the
hose.
Disposable Dust Bag
Change the bag. Hint: If picking up fine dust, the bag
may not look full, but a fine substance tends to reduce
suction when it blocks the airflow through the paper bag.
Remove any clogs from the hose that restrict the airflow.
Check both ends of the hose. (See pages 13-14)
Hose
3
3
Headlight not working.
Light Bulb
Replace light bulb.
Noise from the brush roll area.
Brush Roll
Belt
Remove hood and clean debris from the brush roll area.
Replace a cut, loose or out of shape belt.
3
3
Cleaner is hard to push.
Cleaner Height Setting
Turn adjustment knob to a higher position. Hint: Put
handle in operating position. Tilt the cleaner back to
raise the front wheels off floor. Then turn the knob.
Replace a cut, loose and out of shape belt.
3
Belt
3
3
3
3
Brush roll will not turn.
Burning smell.
Belt
Replace cut, loose or out of shape belt.
Replace cut, loose or out of shape belt.
Belt
Dirt Alert red light will not go off.
New carpet fibers.
Over time loose new carpet fibers will diminish and will
not trip the dirt alert sensors.
Dirt Alert red light will not come on.
Dirt sensor is not working.
Cleaner Height Setting
Call 1-800-282-2886 7 a.m. to 8 p.m. Central Standard
time for the nearest authorized Eureka service center.
3
3
Cleaning height knob will not
turn.
Hint: Put handle in operating position. Tilt the cleaner
back to raise the front wheels off floor. Then turn the
knob.
Missing parts.
Questions?
Call 1-800-438-7352 between 8:00 a.m. and 4:45 p.m.,
central standard time, Monday through Friday. Know the
model and serial numbers when you call.
Call 1-800-282-2886 7 a.m. to 8 p.m., Central Standard
time, Monday through Saturday. Know the model and
serial numbers when you call.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
2/01
The Eureka Company
P.O. Box 2799
ORDER FORM
Bloomington, IL 61702-2799
VACUUM CLEANERS
(Not applicable in Canada)
Name
Name
S
O
L
S
H
I
Address (street address needed for UPS)
Address (street address needed for UPS)
D
P
City
State
(Eve)
Zip
City
State
Zip
T
O
T
O
Telephone (Day)
(Fax)
Telephone (Day)
(Eve)
(Fax)
IMPORTANT:
Be sure to include
your model, type,
and serial numbers.
These numbers
may be found on
the rating plate.
Part No.
Qty. Price (USD)
Total
Genuine Eureka Bags, Belts and Filters
58623A
58236A
54926
5.99
3.99
9.99
1.99
2.99
19.99
2.99
Filteraire Disposable Bags (style AA), package of 3
Disposable Bags (style AA), package of 3
Disposable Bags (style AA), package of 10
Motor Filter - package of 2
61333
Model Number:
Type:
61120
Belts (style U) - Extended Life, package of 2
HEPA Filter
60285B
60665
Micron Exhaust Filter, package of 2
Accessories/Tools
Serial Number:
Nested Wands
58728B
13104-4
61037
4.39
2.49
4.49
To Order
Extension Wand
Combination Tool
By Phone
1-800-
438-7352*
HOURS:
Use as Dusting Tool or Upholstery Tool
Crevice Tool
26708-119N
60112
2.69
22.69
10.39
12.99
Call between 8 a.m.
and 4:45 p.m.,
central standard time
Monday through Friday.
Expandable Crevice Tool
Floor Brush
54785A
54002
Micro Tool Set for Keyboards
By FAX
1-309-
823-5789
To Answer Problems
or Questions for U.S.A.
and Canada call:
Hoses
60169
54646A
60169-1
60166
18.79
8.69
Deluxe Stretch Hose Assembly
Stretch Hose Assembly - without Button Lock
Standard Hose Assembly
1-800-
282-2886*
7 a.m. to 8 p.m.
17.39
29.99
11.29
central standard time
Monday through Saturday.
Stair Hose - 15 foot
*En Mexico llame al
61224-1
5670-6169
Hose Assembly - with Button Lock
Brush Rolls
By Mail
Wood (15 inch)
60252-2
60251-2
61308-1
12.59
13.89
15.89
Wood (12 inch)
Simply fill out
this Order Form.
Please be sure to
include day
and evening
phone numbers.
Wood (12 inch) - 4600 series
Miscellaneous Parts
Light bulb (15 watt)
48815
1.69
Total (prices subject to change without notice)
Tax (add state tax & local taxes as required by law)
Method of payment (no C.O.D. orders)
Check or money order (payable to The Eureka Company). Do not send currency.
Charge to my
Visa (13/15 digits)
MasterCard (13 digits)
Amer. Express (15 digits)
Postage & Handling Charge (within U.S.A.)
5.50
Acct. number
Signature (full name as shown on acct.)
Expiration Date
TOTAL
© 2001 White Consolidated Industries, Inc.
Printed in U.S.A.
TOTAL ENCLOSED
70352
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
THE EUREKA LIMITED WARRANTY
hat This Warranty Covers
W
Your Eureka cleaner is warranted to be free from all defects in material and workmanship in normal household use for a period of one year. The warranty is granted only to the
original purchaser and members of his or her immediate household. The warranty is subject to the following provisions.
hat This Warranty Does Not Cover
W
•
•
•
Parts of the cleaner that require replacement under normal use, such as disposable dust bags, filters, drive belts, light bulbs, and brush roll bristles.
Damages or malfunctions caused by negligence, abuse, or use not in accordance with the Owner’s Guide.
Defects or damages caused by unauthorized service or the use of other than Genuine Eureka parts.
hat The Eureka Company Will Do
The Eureka Company will, at its option, repair or replace a defective cleaner or cleaner part that is covered by this warranty. As a matter of warranty policy, the Eureka Company
will not refund the consumer’s purchase price.
W
arranty Registration
W
Please fill out and return the warranty registration card accompanying your cleaner.
btaining Warranty Service
To obtain warranty service you must return the defective cleaner or cleaner part along with proof of purchase to any Eureka Authorized Warranty Station.
You will find the nearest location in the Yellow Pages, under “Vacuum Cleaners–Service and Repair.” Be certain that the Warranty Station is “Eureka Authorized.”
For the location of the nearest Eureka Authorized Warranty Station or for service information, telephone toll free:
O
USA: 1-800-282-2886
Mexico: 5670-6169
Canada: 1-800-282-2886
If you prefer, you can write to The Eureka Company, Service Division, 807 North Main Street, Bloomington, Illinois 61701, USA. In Canada write to The Eureka Company,
866 Langs Drive, Cambridge, Ontario N3H 2N7.
If it is necessary to ship the cleaner outside your community to obtain warranty repair, you must pay the shipping charges to the Eureka Authorized Warranty Station.
Return shipping charges will be paid by the Warranty Station. When returning parts for repair, please include the model, type, and serial number from the data plate on the cleaner.
urther Limitations and Exclusions
F
Any warranty that may be implied in connection with your purchase or use of the cleaner, including any warranty of Merchantability or any warranty for Fitness ForAParticular
Purpose is limited to the duration of this warranty. Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you.
Your relief for the breach of this warranty is limited to the relief expressly provided above. In no event shall Eureka be liable for any consequential or incidental damages you
may incur in connection with your purchase or use of the cleaner. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above
limitation or exclusion may not apply to you.
This warranty gives you specific legal rights. You may also have other rights which vary by state.
GENUINE
EUREKA PRODUCT
uestions & Answers about Genuine Eureka Products
Q: Why should I use only Genuine Eureka paper bags, belts, and parts in my Eureka vacuum cleaner?
Q
A: Using Genuine Eureka Products, which are made to our exacting specifications and engineered with emphasis on quality, performance, and customer satisfaction,
ensures the long life and cleaning efficiency of your vacuum cleaner. Overall, this saves you money and helps to keep your home clean.
Q: How can I be sure I am using only genuine Eureka products in my vacuum cleaner?
A: Typically, packaged products and paper bags can be identified by a “Genuine Eureka Product” symbol (see illustration above). For further identification assistance,
you may call our toll-free number, 1-800-282-2886, for the location of a nearby Eureka Authorized Warranty Station.
Q: Are there any differences between “made to fit” or “imitation” and Genuine Eureka paper bags, belts, and parts?
A: Yes, there are some very important differences in materials, quality, and reliability. Many customers have mistakenly purchased “imitation” paper bags and parts
while thinking they purchased genuine. Unfortunately, many of these customers discovered the differences after they experienced related difficulties.
ForGenuineEurekaValue,AcceptNoImitations!
THE EUREKA COMPANY
Bloomington, Illinois 61701
Household Warranty
abs 190
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Questions?
Do Not Return To Store
Call
1-800-282-2886
7 a.m. to 8 p.m., Central Standard Time, Monday thru Saturday
Accessory Items in This Carton
1 combination tool
1 dusting brush
(on some models)
(on some models)
1 crevice tool
1 hose assembly
1 upholstery nozzle
(on some models)
1 vacuum cleaner
handle
1 hardware package
(2 screws)
1 wand
Thank you for selecting a Eureka cleaner.
Don’t Forget to Use
Genuine Eureka
Bags and Belts
Caution: Damages caused by the use of non-genuine
Eureka bags are not covered by the Eureka Limited
Warranty.
©2000 White Consolidated Industries, Inc.
Printed in U.S.A.
Part No. 70820A (1/01)
Download from Www.Somanuals.com. All Manuals Search And Download.
|