Eizo Computer Monitor L760T C User Manual

Users Manual  
Touch Panel Color LCD Monitor  
It shall be assured that the final system is in compliance  
to IEC60601-1-1 requirements.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
TABLE OF CONTENTS  
PRECAUTIONS ...................................................................................4  
1. INTRODUCTION .....................................................................................9  
1-1. Features ........................................................................................................9  
1-2. Package Contents..........................................................................................9  
1-3. Controls & Connectors ..............................................................................10  
2. CABLE CONNECTION .........................................................................12  
2-1. Before connecting .......................................................................................12  
2-2. Connecting the signal cable ........................................................................13  
2-3. Touch Operation.........................................................................................15  
2-4. Connecting two PCs to the monitor............................................................15  
3. ScreenManager....................................................................................16  
3-1. How to use the ScreenManager ..................................................................16  
3-2. Adjustments and Settings............................................................................17  
3-3. Useful Functions .........................................................................................18  
4. ADJUSTMENT ......................................................................................20  
4-1. Screen Adjustment ......................................................................................20  
4-2. Color Adjustment .......................................................................................23  
5. ATTACHING A STAND..........................................................................25  
6.TROUBLESHOOTING...........................................................................27  
7. CLEANING............................................................................................31  
8. SPECIFICATIONS.................................................................................32  
9. GLOSSARY...........................................................................................35  
APPENDIX/ANHANG/ANNEXE ..................................................................i  
TABLE OF CONTENTS  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
PRECAUTIONS  
IMPORTANT!  
xꢀ This product has been adjusted specifically for use in the region to which it was  
originally shipped. If operated outside the region to which it was originally shipped,  
the product may not perform as stated in the specifications.  
xꢀ To ensure personal safety and proper maintenance, please read this section and the  
caution statements on the unit (refer to the figure below).  
[Location of the Caution Statements]  
[Symbols on the unit]  
Symbol  
Location  
This symbol indicates  
Front  
Power button  
Control panel  
Press to turn the monitor’s power on or off.  
Rear  
Alternating current  
Name Plate  
Rear  
Alerting electrical hazard  
Caution  
Rear  
Refer to SAFETY SYMBOLS section in this  
manual.  
4
PRECAUTIONS  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
WARNING  
If the unit begins to emit smoke, smells like something is burning, or  
makes strange noises, disconnect all power connections immediately  
and contact your dealer for advice.  
Attempting to use a malfunctioning unit can be dangerous.  
Do not dismantle the cabinet or modify the unit.  
Dismantling the cabinet or modifying the unit may result in electric shock or  
burn.  
Refer all servicing to qualified service personnel.  
Do not attempt to service this product yourself as opening or removing covers  
may expose you to dangerous voltage or other hazards.  
Keep small objects or liquids away from the unit.  
Small objects accidentally falling through the ventilation slots into the cabinet  
or spillage into the cabinet may result in fire, electric shock, or equipment  
damage.  
If an object or liquid falls/spills into the cabinet, unplug the unit immediately.  
Have the unit checked by a qualified service engineer before using it again.  
Place the unit on a strong, stable surface.  
A unit placed on an inadequate surface may fall, resulting in injury or  
equipment damage.  
When the unit is dropped, please ask your dealer for advice. Do not continue  
using a damaged unit. Using a damaged unit may result in fire or electric  
shock.  
OK  
Set the unit in an appropriate location.  
Not doing so may cause damage and could result in fire or electric shock.  
*
*
Do not place outdoors.  
Do not place in the transportation system (ship, aircraft, trains, automobiles,  
etc.)  
*
*
*
*
Do not place in a dusty or humid environment.  
Do not place in a location where the steam comes directly on the screen.  
Do not place near heat generating devices or a humidifier.  
Do not place in an inflammable gas environment.  
PRECAUTIONS  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
WARNING  
To avoid danger of suffocation, keep the plastic packing bags away  
from babies and children.  
Use the enclosed power cord and connect to the standard power outlet  
of your country. Be sure to remain within the rated voltage of the  
power cord.  
Not doing so may cause in fire or electric shock.  
To disconnect the power cord, grasp the plug firmly and pull.  
Never tug on the cord, doing so may cause damage and could result in fire or  
electric shock.  
OK  
The equipment must be connected to a grounded main outlet.  
Not doing so may cause in fire or electric shock.  
Use the correct voltage.  
*
Do not overload your power circuit, as this may result in fire or electric  
shock.  
*
The unit is designed for use with a specific voltage only. Connection to  
another voltage than specified in this User’s Manual may cause fire, electric  
shock, or other damage.  
*
Do not overload your power circuit, as this may result in fire or electric  
shock.  
Handle the power cord with care.  
*
*
Do not place the cord underneath the unit or other heavy objects.  
Do not pull on or tie the cord.  
If the power cord becomes damaged, stop using it. Use of a damaged cord  
may result in fire or electric shock.  
Never touch the plug and power cord if it begins to thunder.  
Touching them may result in electric shock.  
6
PRECAUTIONS  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
WARNING  
When attaching an arm stand, please refer to the user’s manual of the  
arm stand and install the unit securely.  
Not doing so may cause the unit to come unattached, which may result in  
injury or equipment damage. When the unit is dropped, please ask your dealer  
for advice. Do not continue using a damaged unit. Using a damaged unit may  
result in fire or electric shock. When reattaching the tilt stand, please use the  
same screws and tighten them securely.  
Do not touch a damaged LCD panel directly with bare hands.  
The liquid crystal which leaks from the panel is poisonous if it enters the eyes  
or mouth.  
If any part of the skin or body comes in direct contact with the panel, please  
wash thoroughly. If some physical symptoms result, please consult your  
doctor.  
Follow local regulation or laws for safe disposal.  
The backlight of the LCD panel contains mercury.  
CAUTION  
Handle with care when carrying the unit.  
Disconnect the power cord and cables when moving the unit. Moving the unit  
with the cord attached is dangerous. It may result in injury or equipment  
damage.  
When handling the unit, grip the bottom of the unit firmly with both  
hands ensuring the panel faces outward before lifting.  
Dropping the unit may result in injury or equipment damage.  
OK  
Do not block the ventilation slots on the cabinet.  
* Do not place books or any other papers on the ventilation slots.  
* Do not install the unit in a closed space.  
* Do not use the unit lying down or upside down.  
Using the unit in these ways blocks the ventilation slots and prevents proper  
airflow, leading to fire or other damage.  
PRECAUTIONS  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
CAUTION  
Do not touch the plug with wet hands.  
Touching them may result in electric shock.  
Use an easily accessible power outlet.  
This will ensure that you can disconnect the power quickly in case of a  
problem.  
Periodically clean the area around the plug.  
Buildup of dust, water, or oil on the plug may result in fire.  
Unplug the unit before cleaning it.  
Cleaning the unit while it is plugged into a power outlet may result in electric  
shock.  
If you plan to leave the unit unused for an extended period, disconnect  
the power cord from the wall socket after turning off the power switch  
for the safety and the power conservation.  
LCD Panel  
In order to suppress the luminosity change by long-term use and to maintain  
the stable luminosity, use of a monitor in lower brightness is recommended.  
The screen may have defective pixels. These pixels may appear as slightly light  
or dark area on the screen. This is due to the characteristics of the panel itself,  
and not the product.  
The backlight of the LCD panel has a fixed life span. When the screen becomes  
dark or begins to flicker, please contact your dealer.  
Do not scratch or press on the panel with any sharp objects, such as a pencil or  
pen as this may result in damage to the panel. Do not attempt to brush with  
tissues as this may scratch the panel.  
8
PRECAUTIONS  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
1. INTRODUCTION  
Thank you very much for choosing an EIZO Color Monitor.  
1-1. Features  
Dual inputs compliant  
DVI (p.35) Digital input (TMDS (p.36)) compliant.  
Horizontal scanning frequency:  
Analog input 30 - 81 kHz  
Digital input 30 - 65 kHz  
Analog input 49.5 - 75.5 Hz  
Vertical scanning frequency:  
Digital input 59 - 61 Hz (VGA text: 70 Hz)  
1 M pixels (1280 dots x 1024 lines)  
Resolution:  
Auto Adjustment compliant  
Support to sRGB (p.36) standard  
The height adjustable stand incorporated  
Touch Panel provided  
Touch Panel Pointer “TP1” is available (optional, p.14)  
1-2. Package Contents  
Please contact your local dealer for assistance if any of the listed items are missing or  
damaged.  
LCD Monitor  
Power Cord  
Signal Cable (MD-C87)  
Touch Panel Cable (FD-C38)  
User’s Manual  
ScreenManager Quick Reference  
LIMITED WARRANTY  
CD-ROM for Touch Panel  
(Contents: TouchWare (Touch Panel Driver), User’s Manual)  
NOTE  
Please retain the packing materials for future transference.  
Regarding the installing the touch panel driver, please follow the instructions in the  
CD-ROM.  
1. INTRODUCTION  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
1-3. Controls & Connectors  
Front  
(1)  
Control Panel  
SIGNAL  
1 - 2  
MODE  
AUTO  
ENTER  
(2)  
(6)  
(3)  
(5)  
(8)  
(7)  
(4)  
(1)ScreenManager®  
Monitor Adjustment menu (p.16)  
Input Signal  
Selection Button  
Switch the input signals when connecting 2  
PCs. (p.15)  
(2)SIGNAL1-2  
Mode Button  
Show or switch the color mode. (p.23)  
(3)MODE  
(4)AUTO  
Auto Adjustment  
Button  
Adjust the screen to appropriate condition  
automatically. (analog input only)  
Enter Button  
Show the ScreenManager on the screen.  
(5)ENTER  
Confirm the setting / adjustment function.  
Save the adjustment values.  
Control Buttons  
(Left, Down, Up,  
Right)  
Select the desired function.  
(6)  
Increase and decrease the adjustment value.  
Power Switch  
ON or OFF the monitor’s power.  
(7)  
(8)  
Power Indicator  
Indicate monitor’s operation status.  
Blue: Operation  
Flashing blue: Last 15 min. of operation  
time before entering the power off state.  
(p.18)  
Flashing yellow slowly: Power off  
10 1. INTRODUCTION  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
Rear  
(13)  
(15)  
(14)  
Bottom  
(9)  
(11)  
(10)  
(12)  
(9)  
Power Connector  
Connect the power cord.  
(10)  
DVI-D Connector  
(SIGNAL1)  
Connect the optional digital cable.  
D-Sub mini 15 pin  
Connector  
(SIGNAL2)  
Connect the enclosed analog cable (MD-  
C87)  
(11)  
(12)  
RS-232C port  
Connect the enclosed touch panel cable  
(FD-C38).  
(13) Hole for TP1  
(14)  
Hole for installing the lead of the TP1  
(Optional Touch Panel Pointer).  
Security Lock Slot  
Allows for connection of a security cable.  
This lock supports Kensington’s MicroSaver  
security system.  
For further information, please consult:  
Kensington Technology Group  
2855 Campus Drive, San Mateo, CA 94403  
USA  
Tel: 800-650-4242, x3348  
Intl: 650-572-2700, x3348  
Fax: 650-572-9675  
(15) Stand (Detachable)  
The LCD monitor can be used with an other  
stand by removing the stand (see page 25).  
1. INTRODUCTION 11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
2. CABLE CONNECTION  
2-1. Before connecting  
Before connecting your monitor to the PC, change the display screen settings (resolution  
(p.35) and frequency) in accordance with the charts below.  
NOTE  
xꢀ The lower display modes like 640x 480, automatically enlarge to the maximum  
display mode (1280 x 1024), and some lines of the characters may become fuzzy. In  
this case, use <Smoothing> function (p.22) to make the lines clear.  
xꢀ When your computer and display support VESA DDC, the suitable resolution and  
the refresh rate are set by just plugging your display into the computer without any  
manual settings.  
Analog Input  
Resolution  
Frequency  
Dot Clock  
Remarks  
70 Hz  
VGA Mode13  
VGA, VESA  
VGA TEXT  
VESA  
320 ˜ 200  
640 ˜ 480  
720 ˜ 400  
800 ˜ 600  
1024 ˜ 768  
1152 ˜ 864  
1280 ˜ 960  
1280 ˜ 1024  
135 MHz(Max)  
75 Hz  
70 Hz  
75 Hz  
75 Hz  
75 Hz  
VESA  
VESA  
VESA  
VESA  
60 Hz  
75 Hz  
Digital Input  
Resolution  
Frequency  
Dot Clock  
Remarks  
60 Hz  
70 Hz  
60 Hz  
60 Hz  
60 Hz  
VGA  
VGA TEXT  
VESA  
VESA  
VESA  
640 ˜ 480  
720 ˜ 400  
800 ˜ 600  
1024 ˜ 768  
1280 ˜ 1024  
109 MHz  
(Max)  
12 2. CABLE CONNECTION  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
2-2. Connecting the signal cable  
NOTE  
xꢀ Be sure that the power switches of both the PC and the monitor are OFF.  
1. Plug the signal cable into the connector at the rear of the monitor  
and the other end of the cable into the video connector on the PC.  
After connecting, secure the connection with the screw-in fasteners.  
Digital Signal Input Connecter  
Analog Signal Input Connecter  
1.  
Signal Cable  
3.  
Power Cord  
2.  
Touch Panel Cable  
Analog Input  
Signal Cable  
Connector of PC  
PC  
Signal Cable (enclosed, MD- Video Output  
xStandard graphics card  
C87)  
Connector/ D-Sub  
mini 15 pin  
Input Connecor  
(monitor)/ D-Sub  
mini 15 pin  
Digital Input  
Signal Cable  
Connector of PC  
PC  
FD-C39 (Optional)  
Video Output  
Connector DVI-I  
xDigital Graphics card  
Input Connecor  
(monitor)/ DVI  
2. Plug the enclosed touch panel cable (FD-C38) into the RS-232C port  
of the monitor. Then, plug the other end of the cable into the COM  
port of the PC.  
2. CABLE CONNECTION 13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
3. Plug the power cord into the power connector on the rear of the  
monitor. Then, plug the other end of the cord into a power outlet.  
WARNING  
Use the enclosed power cord and connect to the standard  
power outlet of your country.  
Be sure to remain within the rated voltage of the power cord.  
Not doing so may cause in fire or electric shock.  
The equipment must be connected to a grounded main  
outlet.  
Not doing so may cause in fire or electric shock.  
4. Turn on the monitor’s main power and then switch on the PC's  
power.  
The monitor’s power indicator will light up (blue).  
If an image does not appear, refer to the “6. TROUBLESHOOTING” (p.27) for  
advice.  
5. Install the TouchWare with following the instructions on the CD-  
ROM.  
Please carefully read the readme file of TouchWare at the installation.  
NOTE  
xꢀ When selecting the Calibration Type at the installing the TouchWare, select “2-  
point calibration”.  
14 2. CABLE CONNECTION  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
NOTE  
xꢀ Whenever finished, turn off the PC and the monitor. Disconnecting the monitor  
from the power supply is recommended to save energy completely.  
xꢀ Adjust brightness of the screen depending on the brightness of your environment.  
Too dark or too bright of a screen can cause eyestrain.  
xꢀ Be sure to take adequate rests. A 10-minute rest period each hour is suggested.  
2-3.Touch Operation  
Point and touch with one finger only.  
NOTE  
xꢀ Do not touch the screen while the computer is starting. Touch the screen after  
disappearing TouchWare starting window.  
xꢀ Do not touch the screen while turning on the monitor. Touch the screen one second  
later after appearing the image.  
xꢀ For the users with gloves, we recommend to use touch panel pointer, “TP1”  
(optional). Regarding the installation, please refer to the User’s Manual of TP1.  
2-4. Connecting two PCs to the monitor  
Two PCs can be connected to the monitor through the DVI and the D-Sub mini 15 pin  
connector on the back of the monitor.  
Selecting the active input  
The Input Signal Selection Button on the control panel can be used to select either Signal  
1 or Signal 2 as the active input at any time. Every time the button is pressed, the input  
changes. When switching the signal, the kind of the input signal (Signal1 or 2/Analog or  
Digital) is displayed for a few seconds on the right top corner of the screen.  
Input Signal Selection Button  
SIGNAL  
1 - 2  
MODE  
AUTO  
ENTER  
2. CABLE CONNECTION 15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
3. ScreenManager  
3-1. How to use the ScreenManager  
ScreenManager  
Main Menu  
Control Buttons  
Left, Down, Up, Right  
SIGNAL  
1 - 2  
MODE  
AUTO  
ENTER  
Auto Adjustment Button  
Enter Button  
1. Entering the ScreenManager  
Press the Enter Button once to display the main menu of the ScreenManager.  
2. Making Adjustments and Settings  
(1) Select the desired sub menu icon using the Control Buttons and press the Enter  
Button. The sub menu appears.  
(2) Use the Control Buttons to select the desired setting icon and press the Enter  
Button. The setting menu appears.  
(3) Use the Control Buttons to make all required adjustments and press the Enter  
Button to save the settings.  
3. Exiting the ScreenManager  
(1) To return to the main menu, select the <Return> icon or press the Down  
Button twice, followed by the Enter Button.  
(2) To exit the ScreenManager, select <Exit> icon or press the Down Button twice,  
followed by the Enter Button.  
NOTE  
xꢀ Double clicking the Enter Button at any time also exits the ScreenManager menu.  
16 3. ScreenManager  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
3-2. Adjustments and Settings  
The following table shows all the ScreenManager’s adjustment and setting menus.  
“*” indicates adjustments of analog input only.  
Main menu  
Sub menu  
Reference  
Screen  
Clock  
*
*
*
*
4-1. Screen Adjustment (p.20)  
Phase  
Position  
Range Adjustment  
Smoothing  
Brightness  
Color Mode  
x Custom  
Temperature  
Gamma  
Color  
4-2. Color Adjustment (p.23)  
Saturation  
Hue  
Gain  
Reset  
x sRGB  
Others  
Input Signal  
Set the input signal selection of  
automatic or manual (p.19)  
Off Timer  
Set the power save (p.18)  
VGA Selection  
Menu Position  
Translucent  
Menu Off Timer  
Reset  
Select the display mode. (p.28)  
Adjust the menu position.  
Set the transparency of the menu.  
Set the menu displaying time.  
Return to the factory default settings.  
(p.33)  
Information  
Language  
Information  
Review the ScreenManager’s settings,  
model name, serial number and usage  
time*1.  
English, German,  
French, Spanish,  
Italian and Swedish  
Select the ScreenManager’s language.  
*1 Due to the inspection on the factory, the usage time may not “0 hour” at shipping.  
3. ScreenManager 17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
3-3. Useful Functions  
Adjustment Lock  
Use the “Adjustment Lock” function to prevent any accidental changes.  
Locked function  
xAuto Adjustment Button adjustments and settings in the  
ScreenManager.  
Unlocked function  
xAdjustment of brightness by the Control Buttons.  
xInput Signal Selection Button  
xMode Button  
[To lock]  
(1) Switch off the monitor’s power by the power switch on the control panel.  
(2) Press on the Auto adjustment button while switching on the monitor’s power.  
[To unlock]  
(1) Switch off the monitor’s power by the power switch on the control panel.  
(2) Hold down the Auto adjustment button once again and turn the power back on.  
Off Timer  
The off timer function causes the monitor to automatically enter a power off state after  
a predetermined amount of time has lapsed. This function was created to reduce  
afterimage characteristics that are particular to LCD monitors when the monitor screen  
is left on for a long period without use.  
[Procedure]  
(1) Select <Off Timer> in the ScreenManager <Others> menu.  
(2) Select “Enable” and press the Right and Left Buttons to adjust the “On Period” (1  
to 23 hours).  
[Off timer system]  
PC  
Monitor  
Power Indicator  
On Period (1H - 23H)  
Last 15 min. in “On period”  
“On period” expired  
Operation  
Blue  
Advance Notice *1  
Blue Flashing  
Power off  
Flashing yellow slowly  
*1  
Advance notice (Power Indicator flashing blue) will be given 15 minutes before the monitor  
automatically enters the “Power Off” mode. To delay entering the “Power Off” mode, press  
the power switch during the advance notice period. The monitor will continue to operate for  
an additional 90 minutes.  
[Power Resumption Procedure]  
Press the power switch.  
18 3. ScreenManager  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
EIZO Logo display  
Enables to display the EIZO logo for a while when switching on the monitor (Default is  
no logo). If you desire to display or undisplay this logo, use this function.  
[To display]  
(1) Switch off the monitor’s power by the Power switch on the control panel.  
(2) Hold down the Enter button once again and turn the power back on.  
[To undisplay]  
(1) Switch off the monitor’s power by the Power switch.  
(2) Hold down the Enter button once again and turn the power back on.  
Automatically selecting the input signal function  
The monitor will automatically detect the inputted signal of either the connection for  
display.  
Connecting two PCs to the monitor  
When the one computer is switched off, the monitor will automatically dislay the other  
signal.  
Use the ScreenManager to switch the input selection to manual.  
[Procedure]  
(1) Select <Input Signal> in the <Others> menu.  
(2) Select “Manual”.  
3. ScreenManager 19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
4. ADJUSTMENT  
The monitor displays the digital input image correctly based on its pre-setting  
data. Adjust the brightness (p.23).  
4-1. Screen Adjustment  
Screen adjustments for the LCD monitor should be used in suppressing screen flickering  
and also for adjusting the screen to its proper position. There is only one correct  
position for each display mode. It is also recommended to use the ScreenManager  
function when first installing the display or whenever changing the system.  
Adjustment Procedure  
NOTE  
xꢀ Allow the LCD monitor to stabilize for at least 20 minutes before making image  
adjustments.  
1. Press the Auto Adjustment Button on the control panel.  
The message “Your setting will be lost, if you press again now.” appears and  
remains on the screen for 5 seconds. While the message is on the screen, press the  
Auto Adjustment Button again to automatically adjust the clock, phase, and screen  
position. If you do not wish to do adjust the screen, do not press the Auto  
Adjustment Button again.  
NOTE  
xꢀ The Auto Adjustment function is intended for use on AT-compatible PC running  
Windows. It may not work properly in either of the following cases.  
When running an AT-compatible PC on MS-DOS (Not windows). The  
background color for the “wall paper” or “desktop” pattern is set to black.  
If the appropriate screen can not be made by using the Auto Adjustment  
Button, adjust the screen through the following procedures. If the  
appropriate screen can be made, proceed to step 4.  
20 4. ADJUSTMENT  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
2. We recommend setting the desktop pattern to that as shown in the  
diagram below.  
NOTE  
xꢀ More precise adjustment is available for using the “Screen Adjustment  
program” utility software. It can be downloaded from the EIZO homepage  
(http://www.eizo.com/).  
3. Adjust by using <Screen> menu in the ScreenManager.  
(1) Vertical bars appear on the screen  
o
Use the <Clock> (p.35) adjustment.  
Select the <Clock> and eliminate the vertical bars by using the Right and Left  
of the Control Buttons.  
Do not continuously press the Control Buttons, as the adjustment value will  
change quickly and make it difficult to locate the most suitable adjustment  
point. If the horizontal flickering, blur or bars appear, proceed to <Phase>  
adjustment as follows.  
(2) Horizontal bars appear on the screen.  
o
Use the <Phase> (p.35) adjustment.  
Select the <Phase> and eliminate the horizontal flickering, blurring or bars by  
using the Right and Left Buttons.  
NOTE  
xꢀ Horizontal bars may not completely disappear from the screen depending on  
the PC.  
4. ADJUSTMENT 21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
(3) The screen position is incorrect.  
o
Use the <Position> adjustment.  
The correct displayed position of the monitor is decided because the number  
and the position of the pixels are fixed. The “Position” adjustment moves the  
image to the correct position.  
Select <Position> and adjust the position by using the Up, Down, Right and  
Left Buttons.  
If vertical bars of distortion appear after finishing the <Position> adjustment,  
return to <Clock> adjustment and repeat the previously explained adjustment  
procedure. Clocko Phaseo Position  
4. To adjust the output signal range (Dynamic Range) of the signal.  
o
Use the <Range Adjustment> (p.36).  
This controls the level of output signal range to display the whole color gradation  
(256 colors).  
[Procedure]  
Press the Auto Adjustment Button on the control panel while displaying the  
<Range Adjustment> menu to automatically adjust the range. The screen blanks  
for a moment, and adjusts the color range to display the whole color gradation of  
the current output signal.  
5. To smooth the blurred texts of the enlarged screen of the lower  
resolutions.  
o
Switch the <Smoothing> setting.  
<Smoothing> is clear-cut the letters or lines.  
Select <Smoothing> in the screen menu and select the suitable level from 1 ~ 5.  
NOTE  
xꢀ The “Smoothing” is disabled in the resolution 1280 x 1024.  
xꢀ Since the displayed image is enlarged, the blurred texts may not be  
necessarily lost completely.  
22 4. ADJUSTMENT  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
4-2. Color Adjustment  
In the analog input, perform the “Range Adjustment” (p.22) before making the  
color adjustments.  
The <Color> menu in the ScreenManager enables to change the color of the screen. By  
using the <Color Mode>, the adjustment mode can be selected from <Custom mode> (to  
adjust the color settings according to your preference) and <sRGB> mode.  
NOTE  
xꢀ Allow the LCD monitor to stabilize for at least 20 minutes before making image  
adjustments. (Allow the monitor to warm up for at least 20 minutes before making  
adjustments.)  
xꢀ Performing the <Reset> of the <Color> menu returns the color settings to the  
default settings.  
xꢀ The values shown in percentages represent the current level within the specific  
adjustment. They are available only as a reference tool. (To create an uniform white  
or black screen, the percentages for each will probably not be the same.)  
xꢀ Direct pressing the Mode Button on the control panel also can show or switch the  
Color Mode.  
Adjustment Contents  
Menu  
Color Mode  
Custom sRGB  
Function Descriptions  
Adjustable range  
0 a 100%  
Brightness  
To set the brightness of the  
screen  
NOTE  
xDirect pressing the up and down control button also  
can adjust the brightness. After the adjustment, press  
Enter button to save the data.  
Temperature  
(p.35)  
-
To set the color temperature  
4,000 a 10,000 K  
in 500 K increments  
(including 9,300 K).  
Default setting is off  
(normal white)  
NOTE  
xThe values shown in the Kelvin are available only as a  
reference tool.  
xSetting the temperature under 4,000 K or over 10,000  
K invalidates the color temperature setting. (The color  
temperature’s setting turns “OFF”.)  
4. ADJUSTMENT 23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
Menu  
Color Mode  
Custo sRGB  
Function Descriptions  
Adjustable range  
m
Gamma  
(p.35)  
-
To set the gamma value  
1.8 a 2.6  
NOTE  
xIf setting the gamma value, the using the monitor in  
the digital signal input is recommended.  
If using the monitor in the analog input signal, set the  
gamma value from 1.8 to 2.2.  
Saturation  
-
To change the saturation  
-128 a 127  
Setting the minimum  
level (-128) turns the  
image to the  
monochrome.  
NOTE  
xThe <Saturation> adjustment may cause  
undisplayable color tone.  
Hue  
-
-
To change the flesh color,  
etc.  
-32 a 32  
NOTE  
xThe <Hue> adjustment may cause undisplayable color  
tone.  
Gain (p.35)  
To change each color (red,  
green and blue)  
0 a 100%  
By adjusting the red,  
green and blue color  
tones for each mode,  
custom colors can be  
defined. Display a  
white or gray  
background image and  
adjust the <Gain>.  
NOTE  
xThe values shown in the percentage are available only  
as a reference tool.  
xSetting the <Temperature> (p.35) invalidates the  
<Gain> adjustment. <Gain> setting returns to the  
default.  
Reset  
-
To return the color settings  
to the default settings  
Select the “Reset”.  
24 4. ADJUSTMENT  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
5. ATTACHING A STAND  
The LCD monitor can be used with other stand by removing the tilt stand and attaching  
the stand to the LCD monitor.  
NOTE  
xꢀ If you will use the other stand, confirm the followings to the manufacturers before  
selecting.  
- Hole spacing on the stand mounting: 100 mm x 100 mm (VESA compliant)  
- Supportable Weight: Total weight of the monitor (without stand) and attaching  
equipment such as a cable  
- TÜV/GS approved stand  
xꢀ Please connect cables after attaching a stand.  
Setup Procedure  
1. Hold the center of the stand mounting cover and slide them  
rightward or leftward to remove the mounting cover.  
Stand mounting cover  
2. Lay the LCD monitor down. Do not scratch the panel.  
3. Remove the tilt stand by loosening the 4 screws.  
5. ATTACHING A STAND 25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
4. Attach a stand to the LCD monitor securely with the same screws.  
stand  
4 Mounting Screws: M4 x 12 mm  
26 5. ATTACHING A STAND  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
6.TROUBLESHOOTING  
If a problem persists even after applying the suggested remedies, contact an EIZO dealer. The  
xꢀ No Picture Problems  
Problems  
1. No picture  
Points to check with possible solutions  
Check that the power cord is correctly  
connected. If the problem persists, turn off the  
monitor power for a few minutes, then turn it  
back on and try again.  
xIndicator status: Off  
Check the “Brightness” setting.  
xIndicator status: Blue  
Switch the signal input by pressing the Input  
Signal Selection Button on the front control  
panel.  
xIndicator status: Yellow Flashing  
Try pressing the power switch.  
These message appear when the signal is not  
inputted correctly, even if the monitor functions  
properly.  
2. Following messages appear.  
(Error messages shown below will  
remain on the screen for 40  
seconds.)  
When the image is displayed correctly after a  
short time, there is no problem with the  
monitor. (Some PCs do not output the signal  
soon after powering on.)  
Check that the PC is turned ON.  
Check that the signal cable is properly  
connected to the PC or graphics board.  
Switch the signal input by pressing the Input  
Signal Selection Button on the front control  
panel.  
Use the graphics board’s utility software to  
change the frequency setting. (Refer to the  
manual of the graphics board.)  
xWhenever an error signal message  
appears, the signal frequency will be  
displayed in red.  
6. TROUBLESHOOTING 27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
xꢀ Imaging problems  
Problems  
Points to check with possible solutions  
Adjust the image position using the <Position>  
3. Display position is incorrect.  
(p.22)  
The two display modes, VGA 720 x 400 (70  
Hz) and 320 x 200 (70 Hz), have the same  
signal timings. Using this adjustment selects the  
appropriate display mode. (This function effects  
only when the resolution is VGA 720 x 400 (70  
Hz) or 320 x 200 (70 Hz).  
If the problem persists, use the graphics board’s  
utility software to change the display position if  
available.  
Decrease the vertical bars using the <Clock>.  
4. Vertical bars of distortion appear.  
(p.21)  
Decrease the horizontal bars using the <Phase>.  
5. Horizontal bars of distortion  
appear.  
(p.21)  
Switch the <Smoothing> mode. (p.22)  
6. Letters and lines appear blurred.  
Adjust the <Contrast and brightness> (The  
baklight of the LCD monitor has a fixed life  
span. When the screen becomes dark or begins  
to flicker, please consult your dealer.)  
7. The screen is too bright or too  
dark.  
When the screen image is changed after  
displaying the same image for a long period, an  
afterimage may appear. The “Afterimage” can  
be removed gradually by changing the displayed  
image. Use the “Off Timer” function and avoid  
keeping the screen on all the time.(p.18)  
8. Afterimages appear.  
This is due to the characteristics of the panel  
9. The screen has defective pixels  
(e.g. slightly light or dark).  
itself, and not the LCD product.  
28 6. TROUBLESHOOTING  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
xꢀ Other problems  
Problems  
Points to check with possible solutions  
<Smoothing> is disabled when the screen is  
10.The <Smoothing> cannot be  
selected.  
displayed in the 1280 x 1024.  
The adjustment lock is probably on. To unlock:  
switch the LCD monitor off. Then, while  
pressing the Auto Adjustment Button switch,  
the power on. (p.18)  
11.The Enter Button does not  
operate.  
The adjustment lock is probably on. To unlock:  
switch the LCD monitor off. Then, while  
pressing the Auto Adjustment Button switch,  
the power on. (p.18)  
12.The Auto Adjustment Button does  
not operate.  
The Auto adjustment function is intended for  
use on the AT-compatible PC running Windows.  
It may not work properly in either of the  
following cases.  
xWhen running an AT-compatible PC on MS-  
DOS (Not windows).  
xThe background color for the “wall paper”  
or “desktop” pattern is set to black.  
Some signals from a graphics board may not  
function properly.  
xꢀ Touch Panel Problems  
Problems  
Points to check with possible solutions  
The influence of metal may cause jittery cursor.  
13.Cursor is jittery. / Drawing lines  
are not straight and smooth.  
Using the monitor with dual-monitor system  
may cause jittery cursor.  
Run the Stabilize Cursor option from the  
TouchWare.  
Check the baud rate for the touch panel on  
TouchWare. The baud rate of 1200 bps may  
cause continuous touch sound or much time  
requirement for executing touch screen  
calibration or cursor stabilization.  
14.Continuous touch sound./  
Much time requirement for  
executing touch screen  
calibration or cursor stabilization.  
6. TROUBLESHOOTING 29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
Problems  
Points to check with possible solutions  
When cursor position is incorrect or cursor  
15.Cursor position is not correct. /  
Cursor jumps.  
jumps, turn off and on the monitor.  
xThe drawing touch (touch operation with  
dragging the finger on the touch panel) to  
draw the picture may cause incorrect cursor  
position.  
xChanging the position or angle of the  
monitor while the monitor operation will  
cause cursor jump.  
xKeep metals away from the panel surface.  
xPoint and touch with one finger only. Keep  
other fingers away from the touch screen.  
Do not rest the hand in the monitor or bezel  
while touching the screen.  
xDo not touch the screen while the computer  
is starting. Touch the screen after  
disappearing TouchWare starting window.  
xDo not touch the screen while turning on the  
monitor. Touch the screen one second later  
after appearing the image.  
xThe spray for preventing static electricity  
may influences the sensibility of the touch  
panel. Do not use it on cleaning.  
30 6. TROUBLESHOOTING  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
7. CLEANING  
Periodic cleaning is recommended to keep the monitor looking new and to prolong its  
operation lifetime.  
NOTE  
xꢀ Never use thinner, benzene, ethanol, abrasive cleaners, or other strong solvents, as  
these may cause damage to the cabinet or panel.  
xꢀ Never use spray for preventing static electricity, as it may influence the sensibility of  
the touch panel.  
Cabinet  
To remove stains, wipe the cabinet with a soft, lightly moistened cloth using a mild  
detergent. Do not spray wax or cleaner directly into the cabinet. (For details, refer to the  
manual of the PC.)  
Panel  
xꢀ The Panel surface can be cleaned with a soft cloth, such as cotton or lens paper.  
xꢀ If necessary, stubborn stains can be removed by moistening part of a cloth with water  
or isopropyl alcohl to enhance its cleaning power.  
7. CLEANING 31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
8. SPECIFICATIONS  
LCD Panel  
48 cm (19.0 inch), TFT color LCD panel with Anti-Glare Hard  
Coating, Viewing Angle: H: 178°, V: 178° (CR10)  
Dot Pitch  
0.294 mm  
Horizontal Scan Frequency  
Analog: 30 ~ 81 kHz (Automatic)  
Digital: 30 ~ 65 kHz  
Vertical Scan Frequency  
Analog: 49.5 ~ 75.5 Hz (Automatic)  
Digital: 59 ~ 61 Hz, (VGA Text : 70Hz)  
Resolution  
1 M pixels (1280 dots x 1024 lines)  
Dot Clock (Max.)  
Analog: 135 MHz  
Digital: 109 MHz  
Display Colors  
Display Area  
16 million colors (max.)  
376.3 mm (H) ×301.0 mm (V) (13.7” (H) x 11.0” (V))  
(Viewable image size: 481 mm (18.9”))  
Touch Panel  
OS  
Microsoft Windows 2000/XP  
(Not compatible with MacOS)  
Communication RS-232C serial  
protocol  
Detective  
method  
Analog capacitive technology, finger touch  
Power Supply  
100-120/200-240 VAC 10%, 50/60 Hz,  
0.65-0.55 A/0.4-0.35 A  
Power Consumption  
Input Connector  
Max.: 40 W  
D-Sub mini 15 pin, DVI-D  
Separate, TTL, Positive/Negative  
0.7Vp-p/75Positive  
TMDS (Single Link)  
Analog Input Signal (Sync)  
Analog Input Signal (Video)  
Input Signal (Digital)  
Signal registration  
Analog: 45 (Factory preset: 22)  
VESA DDC 2B  
Plug & Play  
Dimensions  
with stand  
414 mm (W) x 442.5 ~524.5mm(H) x 208.5 mm (D)  
(16.3”(W) x 17.4” ~ 20.6”(H) x 8.2”(D))  
without stand  
414 mm (W) x 340 mm (H) x 64 mm (D)  
(16.3”(W) x 13.4”(H) x 2.52” (D))  
Weight  
with stand  
9.0 kg (19.8 lbs.)  
6.0 kg (13.2 lbs.)  
without stand  
Temperature  
Environment  
conditions  
Operating: 0 °C ~ 35 °C (32 °F ~ 95 ° F)  
Storage: -20 °C ~ 60 °C (-4 °F ~ 140 ° F)  
Humidity  
Pressure  
30% to 80% R.H. Non-condensing  
860 to 1,060 hPa  
Certifications and Standards  
100-120 VAC  
CB, NRTL/C-TÜV, FCC-B  
200-240 VAC  
CE(93/42/EEC), CB, TÜV Rheinland/GM  
Type of protection against electric shock: Class I  
EMC class: EN60601-1-2 2001: Group1 Class B  
Classification of medical device (MDD 93/42/EEC): Class I  
Classification of Equipment  
32 8. SPECIFICATIONS  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
Default settings  
Brightness  
Smoothing  
Temperature  
Input Signal  
Off Timer  
100%  
3
Off (normal white: approx. 6500 K)  
Auto  
Disable  
English  
Language  
Optional  
Touch Panel Pointer  
TP1  
Dimensions  
Unit mm (inches)  
8. SPECIFICATIONS 33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
Pin Assignment  
D-Sub mini 15 pin connector  
4
3
2
1
5
Pin  
No.  
Signal  
Pin  
No.  
Signal  
Pin  
No.  
Signal  
10  
9
8
7
6
11  
14 13 12  
15  
1
2
3
4
5
Red video  
Green video  
Blue video  
Ground  
6
7
8
9
10  
Red ground  
Green ground  
Blue ground  
No pin  
11  
12  
13  
14  
15  
Ground Shorted  
Data (SDA)  
H. Sync  
V. Sync  
Clock (SCL)  
No pin  
Ground Shorted  
DVI-D Connector  
Pin  
No.  
Signal  
Pin  
No.  
Signal  
Pin  
No.  
Signal  
3
1
9
17  
2
4
12  
20  
6
7
8
16  
24  
5
13  
21  
10 11  
19  
14 15  
22 23  
18  
1
2
3
TMDS Data2-  
TMDS Data2+  
TMDS Data2/4  
Shield  
9
10  
11  
TMDS Data1-  
TMDS Data1+  
TMDS Data1/3  
Shield  
17  
18  
19  
TMDS Data0-  
TMDS Data0+  
TMDS Data0/5  
Shield  
4
5
6
7
8
NC*  
NC  
12  
13  
NC  
NC  
+5V Power  
20  
21  
NC  
NC  
DDC Clock (SCL) 14  
DDC Data (SDA) 15 Ground (For +5V) 23  
Analog Vertical  
Sync  
22 TMDS Clock shield  
TMDS Clock+  
TMDS Clock-  
16  
Hot Plug Detect  
24  
(*NC: No Connection)  
RS-232C Port (Mini DIN 6 pin)  
Pin No.  
Signal  
6
5
1
2
3
4
5
6
RXD  
RTS  
CTS  
GND  
TXD  
GND  
4
3
2
1
34 8. SPECIFICATIONS  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
9. GLOSSARY  
Clock  
With the analog input signal display, the analog signal is converted to a digital signal  
by the LCD circuitry. To convert the signal correctly, the LCD monitor needs to  
produce the same number clock pulse as the dot clock of the graphics system. When  
the clock pulse is not correctly set, some vertical bars of distortion are displayed on  
the screen.  
Color Temperature (Temperature)  
Color Temperature is a method to measure the white color tone, generally indicated  
in degrees Kelvin. At high temperatures the white tone appears somewhat blue, while  
at lower temperatures it appears somewhat red. Computer monitors generally give  
best performance at high temperature settings.  
5,000 K: Slightly reddish white.  
6,500 K: Warm-white tone, similar to white paper or daylight.  
9,300 K: Slightly bluish white.  
DVI  
(Digital Visual Interface)  
A digital flat panel interface. DVI can transmit digital data from the PC directly  
without loss with the signal transition method “TMDS”.  
There are two kinds of DVI connectors. One is DVI-D connector for digital signal  
input only. The other is DVI-I connector for both digital and analog signal inputs.  
Gain Adjustment  
Adjusts each color parameter for red, green and blue. The color of the LCD monitor  
is displayed through the color filter of the LCD panel. Red, green and blue are the  
three primary colors. The colors on the monitor are displayed by combining these  
three colors. The color tone can change by adjusting the illumination amount passed  
through each color’s filter.  
Gamma  
Generally, the relationship that the light intensity values of a monitor change  
nonlinearly to the input signal level is called “Gamma Characteristic”. On the  
monitor, low gamma values display the whitish images and high gamma values  
display the high contrast images.  
Phase  
The phase adjustment decides the sampling timing point for converting the analog  
input signal to a digital signal. Adjusting the phase after the clock adjustment will  
produce a clear screen.  
9. GLOSSARY 35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
Range Adjustment  
The Range Adjustment controls the level of output signal range to display the whole  
color gradation.  
Resolution  
The LCD panel consists of a fixed number of pixel elements which are illuminated to  
form the screen image. The EIZO L760T-C display panel consists of 1280 horizontal  
pixels and 1024 vertical pixels. At a resolution of 1280 x 1024, all pixels are  
displayed as a full screen.  
sRGB (Standard RGB)  
“International Standard for Red, Green, and Blue color space”  
A color space was defined with the aim of the color matching between applications  
and hardware devices, such as monitors, scanners, printers and digital cameras. As a  
standard default space, sRGB allows Internet users to closely match colors.  
TMDS  
(Transition Minimized Differential Signaling)  
A signal transition method for the digital interface.  
36 9. GLOSSARY  
Download from Www.Somanuals.com. All Manuals Search And Download.  
APPENDIX/ANHANG/ANNEXE  
Preset Timing Chart for Analog input  
Timing-Übersichten für Analog Eingang  
Synchronisation des Signaux pour Analog numerique  
Based on the signal diagram shown below 16 factory presets have been registered in the  
monitor's microprocessor.  
Der integrierte Mikroprozessor des Monitors unterstützt 16 werkseitige  
Standardeinstellungen (siehe hierzu die nachfolgenden Diagramme).  
16 signaux ont été enregistrés en usine dans le microprocesseur du moniteur,  
conformément au diagramme de synchronisation ci-dessous.  
Sync Polarity  
Frequencies  
H kHz V Hz  
Dot Clock  
MHz  
Mode  
H
V
VGA Mode13  
320 × 200  
25.2  
25.2  
28.3  
31.5  
31.5  
36.0  
40.0  
50.0  
49.5  
65.0  
75.0  
78.8  
108.0  
Nega. Nega.  
Nega. Nega.  
Nega. Posi.  
Nega. Nega.  
Nega. Nega.  
31.47  
31.47  
31.47  
37.86  
37.50  
35.16  
37.88  
48.08  
46.88  
48.36  
56.48  
60.02  
67.50  
59.94  
59.94  
70.09  
72.81  
75.00  
56.25  
60.32  
72.19  
75.00  
60.00  
70.07  
75.03  
75.00  
VGA  
640 × 480  
VGA  
720 × 400  
VESA  
640 × 480  
VESA  
640 × 480  
VESA  
800 × 600  
Posi.  
Posi.  
Posi.  
Posi.  
Posi.  
Posi.  
Posi.  
Posi.  
VESA  
800 × 600  
VESA  
800 × 600  
VESA  
800 × 600  
VESA  
1024 × 768  
Nega. Nega.  
Nega. Nega.  
VESA  
1024 × 768  
VESA  
1024 × 768  
Posi.  
Posi.  
Posi.  
Posi.  
Posi.  
Posi.  
Posi.  
Posi.  
Posi.  
Posi.  
VESA  
1152˜864  
VESA  
1280˜960  
108.0  
108.0  
135.0  
60.00  
63.98  
79.98  
60.00  
60.02  
75.03  
VESA  
1280˜1024  
VESA  
1280˜1024  
i
APPENDIX/ANHANG/ANNEXE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
For U.S.A, Canada, etc. (rated 100-120 Vac) Only  
FCC Declaration of Conformity  
We, the Responsible Party  
EIZO NANAO TECHNOLOGIES INC.  
5710 Warland Drive, Cypress, CA 90630  
Phone: (562) 431-5011  
declare that the product  
Trade name: EIZO  
Model: FlexScan L760T-C  
is in conformity with Part 15 of the FCC Rules. Operation of this product is subject to the  
following two conditions: (1) this device may not cause harmful interference, and (2) this  
device must accept any interference received, including interference that may cause undesired  
operation.  
This equipment has been tested and found to comply with the limits for a Class B digital  
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide  
reasonable protection against harmful interference in a residential installation. This  
equipment generates, uses, and can radiate radio frequency energy and, if not installed and  
used in accordance with the instructions, may cause harmful interference to radio  
communications. However, there is no guarantee that interference will not occur in a  
particular installation. If this equipment does cause harmful interference to radio or  
television reception, which can be determined by turning the equipment off and on, the user  
is encouraged to try to correct the interference by one or more of the following measures.  
* Reorient or relocate the receiving antenna.  
* Increase the separation between the equipment and receiver.  
* Connect the equipment into an outlet on a circuit different from that to which the receiver  
is connected.  
* Consult the dealer or an experienced radio/TV technician for help.  
Changes or modifications not expressly approved by the party responsible for compliance  
could void the user’s authority to operate the equipment.  
Note  
Use the attached specified cable below or EIZO signal cable with this monitor so as to keep  
interference within the limits of a Class B digital device.  
- AC Cord  
- Shielded Signal Cable  
- Stereo mini-jack cable  
Canadian Notice  
This Class B digital apparatus complies with Canadian ICES-003.  
Cet appareil numérique de le classe B est comforme à la norme NMB-003 du Canada.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Hinweise zur Auswahl des richtigen Schwenkarms für Ihren Monitor  
Dieser Monitor ist für Bildschirmarbeitsplätze vorgesehen. Wenn nicht der zum  
Standardzubehör gehörige Schwenkarm verwendet wird, muss statt dessen ein geeigneter  
anderer Schwenkarm installiert werden. Bei der Auswahl des Schwenkarms sind die  
nachstehenden Hinweise zu berücksichtigen:  
Der Standfuß muß den nachfolgenden Anforderungen entsprechen:  
a) Der Standfuß muß eine ausreichende mechanische Stabilität zur Aufnahme des Gewichtes  
vom Bildschirmgerät und des spezifizierten Zubehörs besitzen. Das Gewicht des  
Bildschirmgerätes und des Zubehörs sind in der zugehörenden Bedienungsanleitung  
angegeben.  
b) Die Befestigung des Standfusses muß derart erfolgen, daß die oberste Zeile der  
Bildschirmanzeige nicht höher als die Augenhöhe eines Benutzers in sitzender Position ist.  
c) Im Fall eines stehenden Benutzers muß die Befestigung des Bildschirmgerätes derart  
erfolgen, daß die Höhe der Bildschirmmitte über dem Boden zwischen 135 – 150 cm  
beträgt.  
d) Der Standfuß muß die Möglichkeit zur Neigung des Bildschirmgerätes besitzen (max.  
vorwärts: 5°, min. nach hinten t 5°).  
e) Der Standfuß muß die Möglichkeit zur Drehung des Bildschirmgerätes besitzen (max.  
180°). Der maximale Kraftaufwand dafür muß weniger als 100 N betragen.  
f) Der Standfuß muß in der Stellung verharren, in die er manuell bewegt wurde.  
g) Der Glanzgrad des Standfusses muß weniger als 20 Glanzeinheiten betragen (seidenmatt).  
h) Der Standfuß mit Bildschirmgerät muß bei einer Neigung von bis zu 10° aus der  
normalen aufrechten Position kippsicher sein.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recycle Auskunft  
Die Rücknahme dieses Produktes nach Nutzungsende übernimmt EIZO in Deutschland  
zusammen mit dem Partner eds-r gmbh rücknahmesysteme. Dort werden die Geräte in ihre  
Bestandteile zerlegt, die dann der Wiederverwertung zugeführt werden. Um einen Abholtermin  
zu vereinbaren und die aktuellen Kosten zu erfahren, benutzen Sie bitte folgende Rufnummer:  
02153-73 35 00. Weitere Informationen finden Sie auch unter der Internet-Adresse:  
Recycling Information for customers in Switzerland:  
All recycling information is placed in the SWICO’s website.  
Recycling-Information für Kunden in der Schweiz:  
Alle Informationen zum Thema Recycling finden Sie auf der Homepage des Brancheverbandes  
SWICO.  
Renseignements de recyclage pour les clients en Suisse:  
Vous trouvez tous les renseignements pour le sujet de recyclage sur la page WEB de I’UNION  
DE BRAN CHE SWICO.  
Recycling Information for customers in USA:  
All recycling information is placed in the EIZO Nanao Technologies, Inc’s website.  
Återvinnings information för kunder i Sverige:  
All information om återvinning finns på Eizo Europe AB:s hemsida:  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

EverFocus Security Camera ED350 User Manual
Everpure Plumbing Product EV9000 84 User Manual
Frigidaire Air Conditioner FRA12EZT2 User Manual
Frymaster Fryer FPRE14 7 User Manual
Fujitsu Network Card SFP MSA User Manual
Fujitsu Planer PG 18XX User Manual
Fujitsu Scanner fi 5110C User Manual
Gardena Vacuum Cleaner 6000 SP User Manual
GE Answering Machine 15380380 User Manual
GE Water Heater AP12169 5 User Manual