Eizo Computer Monitor L565 User Manual

Users Manual  
Color LCD Monitor  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
TABLE OF CONTENTS  
PRECAUTIONS ...................................................................................4  
1. INTRODUCTION .....................................................................................9  
1-1. Features ........................................................................................................9  
1-2. Package Contents..........................................................................................9  
1-3. Controls & Connectors ..............................................................................10  
2. CABLE CONNECTION .........................................................................12  
2-1. Before connecting .......................................................................................12  
2-2. Connecting the signal cable ........................................................................13  
2-3. Sound Connections.....................................................................................15  
3. ScreenManager....................................................................................16  
3-1. How to use the ScreenManager ..................................................................16  
3-2. Adjustments and Settings............................................................................17  
3-3. Useful Functions .........................................................................................18  
4. ADJUSTMENT ......................................................................................20  
4-1. Screen Adjustment ......................................................................................20  
4-2. Color Adjustment .......................................................................................24  
4-3. Power-save Setup ........................................................................................25  
5. ATTACHING AN ARM STAND ..............................................................27  
6.TROUBLESHOOTING...........................................................................28  
7. CLEANING............................................................................................31  
8. SPECIFICATIONS.................................................................................32  
9. GLOSSARY...........................................................................................34  
APPENDIX/ANHANG/ANNEXE ..................................................................i  
TABLE OF CONTENTS  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
PRECAUTIONS  
IMPORTANT!  
This product has been adjusted specifically for use in the region to which it was  
originally shipped. If operated outside the region to which it was originally shipped,  
the product may not perform as stated in the specifications.  
To ensure personal safety and proper maintenance, please read this section and the  
caution statements on the unit (refer to the figure below).  
[Location of the Caution Statements]  
WARNING  
If the unit begins to emit smoke, smells like something is burning, or  
makes strange noises, disconnect all power connections immediately  
and contact your dealer for advice.  
Attempting to use a malfunctioning unit can be dangerous.  
Do not dismantle the cabinet or modify the unit.  
Dismantling the cabinet or modifying the unit may result in electric shock or  
burn.  
Refer all servicing to qualified service personnel.  
Do not attempt to service this product yourself as opening or removing covers  
may expose you to dangerous voltage or other hazards.  
4
PRECAUTIONS  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
WARNING  
Keep small objects or liquids away from the unit.  
Small objects accidentally falling through the ventilation slots into the cabinet  
or spillage into the cabinet may result in fire, electric shock, or equipment  
damage.  
If an object or liquid falls/spills into the cabinet, unplug the unit immediately.  
Have the unit checked by a qualified service engineer before using it again.  
Place the unit on a strong, stable surface.  
A unit placed on an inadequate surface may fall, resulting in injury or  
equipment damage.  
S
I
G
.
A
U
T
O
E
N
T
.
When the unit is dropped, please ask your dealer for advice. Do not continue  
using a damaged unit. Using a damaged unit may result in fire or electric  
shock.  
OK  
Set the unit in an appropriate location.  
Not doing so may cause damage and could result in fire or electric shock.  
* Do not place in outdoors.  
* Do not place in the transportation system (ship, aircraft, trains, automobiles,  
etc.)  
* Do not install in a dusty or humid environment.  
* Do not place in a location where the steam comes directly on the screen.  
* Do not place near heat generating devices or a humidifier.  
To avoid danger of suffocation, keep the plastic packing bags away  
from babies and children.  
Use the enclosed power cord and connect to the standard power outlet  
of your country. Be sure to remain within the rated voltage of the  
power cord.  
Not doing so may cause in fire or electric shock.  
To disconnect the power cord, grasp the plug firmly and pull.  
Never tug on the cord, doing so may cause damage and could result in fire or  
electric shock.  
OK  
PRECAUTIONS  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5
English  
WARNING  
The equipment must be connected to a grounded main outlet.  
Not doing so may cause in fire or electric shock.  
Use the correct voltage.  
* Do not overload your power circuit, as this may result in fire or electric  
shock.  
* The unit is designed for use with a specific voltage only. Connection to  
another voltage than specified in this User’s Manual may cause fire, electric  
shock, or other damage.  
* Do not overload your power circuit, as this may result in fire or electric  
shock.  
Handle the power cord with care.  
* Do not place the cord underneath the unit or other heavy objects.  
* Do not pull on or tie the cord.  
If the power cord becomes damaged, stop using it. Use of a damaged cord  
may result in fire or electric shock.  
Never touch the plug and power cord if it begins to thunder.  
Touching them may result in electric shock.  
When attaching an arm stand, please refer to the user’s manual of the  
arm stand and install the unit securely with the enclosed screws.  
Not doing so may cause the unit to come unattached, which may result in  
injury or equipment damage. When the unit is dropped, please ask your dealer  
for advice. Do not continue using a damaged unit. Using a damaged unit may  
result in fire or electric shock. When reattaching the tilt stand, please use the  
same screws and tighten them securely.  
Do not touch a damaged LCD panel directly with bare hands.  
The liquid crystal which leaks from the panel is poisonous if it enters the eyes  
or mouth.  
If any part of the skin or body comes in direct contact with the panel, please  
wash thoroughly. If some physical symptoms result, please consult your  
doctor.  
Follow local regulation or laws for safe disposal.  
The backlight of the LCD panel contains mercury.  
6
PRECAUTIONS  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
CAUTION  
Handle with care when carrying the unit.  
Disconnect the power cord and cables when moving the unit. Moving the unit  
with the cord attached is dangerous. It may result in injury or equipment  
damage.  
When handling the unit, grip the bottom of the unit firmly with both  
hands ensuring the panel faces outward before lifting.  
Dropping the unit may result in injury or equipment damage.  
S
I
G
.
A
U
T
O
E
N
T
.
OK  
Do not block the ventilation slots on the cabinet.  
* Do not place books or any other papers on the ventilation slots.  
* Do not install the unit in a closed space.  
* Do not use the unit lying down or upside down.  
Using the unit in these ways blocks the ventilation slots and prevents proper  
airflow, leading to fire or other damage.  
Do not touch the plug with wet hands.  
Touching them may result in electric shock.  
Use an easily accessible power outlet.  
This will ensure that you can disconnect the power quickly in case of a  
problem.  
Periodically clean the area around the plug.  
Buildup of dust, water, or oil on the plug may result in fire.  
Unplug the unit before cleaning it.  
Cleaning the unit while it is plugged into a power outlet may result in electric  
shock.  
If you plan to leave the unit unused for an extended period, disconnect  
the power cord from the wall socket after turning off the power switch  
for the safety and the power conservation.  
PRECAUTIONS  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7
English  
LCD Panel  
The screen may have defective pixels. These pixels may appear as slightly light  
or dark area on the screen. This is due to the characteristics of the panel itself,  
and not the product.  
The backlight of the LCD panel has a fixed life span. When the screen becomes  
dark or begins to flicker, please contact your dealer.  
Do not press on the panel or edge of the frame strongly, as this will result in  
damage to the screen. There will be prints left on the screen if the pressed  
image is dark or black. If pressure is repeatedly applied to the screen, it may  
deteriorate or damage your LCD panel. Leave the screen white to decrease the  
prints.  
Do not scratch or press on the panel with any sharp objects, such as a pencil or  
pen as this may result in damage to the panel. Do not attempt to brush with  
tissues as this may scratch the LCD panel.  
8
PRECAUTIONS  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
1. INTRODUCTION  
Thank you very much for choosing an EIZO Color Monitor.  
1-1. Features  
Dual inputs compliant  
DVI (p.34) Digital input (TMDS (p.35)) compliant.  
Horizontal scanning frequency: 24.8 - 80 kHz (Digital input: 31.5 - 64 kHz)  
Vertical scanning frequency: 55 - 75 Hz Vertical (Digital: 60 Hz (VGA text: 70 Hz))  
Resolution: 1280 dots x 1024 lines  
Auto Adjustment compliant  
ColorManagement function incorporated  
Support to sRGB (p.35) standard  
Built-in speaker system  
1-2. Package Contents  
Please contact your local dealer for assistance if any of the listed items are missing or  
damaged.  
LCD Monitor  
(1)  
(1)  
(1)  
Power Cord  
Signal cable (MD-C87 or MD-C100)  
Stereo mini-jack cable  
User’s Manual  
ScreenManager Quick Reference  
LIMITED WARRANTY  
(4)  
Mounting Screws: M4 x 12 (mm)  
NOTE  
Please retain the packing materials for future transference.  
1. INTRODUCTION  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9
English  
1-3. Controls & Connectors  
Front  
(1)  
(2)  
S
I
G
.
A
UTO  
E
N T .  
(3)  
Control Panel  
AUTO  
ENT.  
SIG.  
(9)  
(5)  
(7)  
(8)  
(4)  
(6)  
(1) ScreenManager  
(2) Speaker*1  
Volume Control  
Mute  
Press the right and left buttons.  
Press the up or down button for a while after  
pressing the right or left button to display the  
volume control bar.  
Press the right or left button to mute off.  
(3) Headphone jack (stereo mini-jack)  
(4) Input signal selection button  
(5) Auto Adjustment Button  
(6) Enter Button  
(7) Control Buttons (Up, Down, Left, Right)  
(8) Power Button  
(9) Power Indicator*2  
Blue  
Operation  
Yellow  
Power saving  
Flashing yellow (2  
times for each)  
Power save mode Digital only  
Off  
Power off  
*1 Regarding the sound connection, see page 15.  
*2 Regarding the power indicator for the “Off Timer”, see page 18.  
10 1. INTRODUCTION  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
Rear  
(15)  
(14)  
(16)  
Bottom  
(11)  
(12)  
(13)  
(10)  
(10) Power Connector  
(11) External line in (stereo mini-jack)  
(12) DVI-D Input Connector (Signal 1)  
(13) D-Sub mini 15 pin Input Connector (Signal 2)  
(14) Security Lock Slot*3  
(15) 4 Holes for Mounting an Arm-Stand*4  
(16) Stand (Detachable)*4  
*3  
Allows for connection of a security cable. This lock supports Kensington’s  
MicroSaver security system.  
For further inforamation, please consult:  
Kensington Technology Group  
2855 Campus Drive, San Mateo, CA 94403 USA  
Tel: 800-650-4242, x3348  
Intl: 650-572-2700, x3348 / Fax: 650-572-9675  
*4  
The LCD monitor can be used with an optional arm stand by removing the stand  
(see page 27).  
1. INTRODUCTION 11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
2. CABLE CONNECTION  
2-1. Before connecting  
Before connecting your monitor to the PC, change the display screen settings (resolution  
(p.34) and frequency) in accordance with the charts below.  
NOTE  
The lower display modes like 640x 480, automatically enlarge to the maximum  
display mode (1280 x 1024), and some lines of the characters may become fuzzy. In  
this case, use <Smoothing> function (p.22) to make the lines clear.  
When your computer and display support VESA DDC, the suitable resolution and  
the refresh rate are set by just plugging your display into the computer without any  
manual settings.  
Analog Input  
Resolution  
640 x 480  
Frequency  
~75 Hz  
70 Hz  
Remarks  
VGA, VESA  
VGA TEXT  
VESA  
720 x 400  
800 x 600  
~75 Hz  
75 Hz  
832 x 624  
Apple Macintosh  
VESA  
1024 x 768  
1152 x 864  
1152 x 870  
1280 x 960  
1280 x 960  
1280 x 1024  
~75 Hz  
75 Hz  
VESA  
75 Hz  
Apple Macintosh  
VESA  
60 Hz  
75 Hz  
Apple Macintosh  
VESA  
~75 Hz  
Digital Input  
Resolution  
640 x 480  
Frequency  
60 Hz  
Remarks  
VGA  
720 x 400  
70 Hz  
VGA TEXT  
VESA  
800 x 600  
60 Hz  
1024 x 768  
1280 x 1024  
60 Hz  
VESA  
60 Hz  
VESA  
12 2. CABLE CONNECTION  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
2-2. Connecting the signal cable  
NOTE  
Be sure that the power switches of both the PC and the monitor are OFF.  
1. Plug the signal cable into the connector at the rear of the monitor  
and the other end of the cable into the video connector on the PC.  
After connecting, secure the connection with the screw-in fasteners.  
Analog Input  
Power Cord  
Signal Cable  
Connector  
PC  
Signal Cable (enclosed)  
Video Output  
Connector D-Sub  
mini 15 pin  
Standard graphics card  
Macintosh G3 (Blue & White) /  
G4  
Signal Cable (enclosed) +  
Macintosh Adapter  
(Optional)  
Video Output  
Connector D-Sub  
15 pin  
Macintosh  
Digital Input  
Power Cord  
Signal Cable  
Connector  
PC  
FD-C04 (Optional)  
Video Output  
Digital Graphics card  
Connector DVI  
NOTE  
The L565 is not compatible with a Power Macintosh G4/G4 Cube ADC (Apple  
Display Connector).  
2. CABLE CONNECTION 13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
2. Plug the power cord into the power connector on the rear of the  
monitor. Then, plug the other end of the cord into a power outlet.  
WARNING  
Use the enclosed power cord and connect to the standard  
power outlet of your country.  
Be sure to remain within the rated voltage of the power cord.  
Not doing so may cause in fire or electric shock.  
The equipment must be connected to a grounded main  
outlet.  
Not doing so may cause in fire or electric shock.  
3. Turn on the monitor's main power and then switch on the PC's  
power.  
The monitor’s power indicator will light up (blue).  
If an image does not appear, refer to the “6. TROUBLESHOOTING” (p.28) for  
advice.  
Whenever finished, turn off the PC and the monitor.  
NOTE  
Adjust brightness of the screen depending on the brightness of your environment.  
Too dark or too bright of a screen can cause eyestrain.  
Be sure to take adequate rests. A 10-minute rest period each hour is suggested.  
14 2. CABLE CONNECTION  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
2-3. Sound Connections  
NOTE  
Always switch the monitor and audio devices or computers off whenever connecting  
or disconnecting any audio devices (computer or CD player) to the monitor.  
Use the enclosed stereo mini-jack cable for connecting audio devices or computers  
to the monitor.  
1. Connect the stereo mini-jack cable to the external line in of the  
monitor.  
2. Connect the other side of stereo mini-jack cable to the line out of  
audio devices.  
Computer or  
CD Player  
Sound control  
Audio performance is available by connecting the headphone to the Headphone jack  
(When headphones are connected, no sound can be heard from the speakers).  
S
I
G
.
A
UTO  
E
N
T
.
Volume control  
Volume control  
Mute  
Press the right and left buttons.  
Press the up or down button for a while after pressing the right or left button  
to display the volume control bar.  
Mute off  
Press the right or left button.  
NOTE  
<Sound> menu of the ScreenManager also controls the sound.  
2. CABLE CONNECTION 15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
3. ScreenManager  
3-1. How to use the ScreenManager  
Control Buttons  
Left, Down, Up, Right  
S
I
G
.
A
UTO  
E
N T .  
AUTO  
ENT.  
SIG.  
Auto Adjustment button  
Enter button  
1. Entering the ScreenManager  
Push the Enter button once to display the main menu of the ScreenManager.  
[Main Menu ]  
2. Making Adjustments and Settings  
(1) Select the desired sub menu icon using the Control buttons and push the Enter  
button. The sub menu appears.  
(2) Use the Control buttons to select the desired setting icon and push the Enter  
button. The setting menu appears.  
(3) Use the Control buttons to make all required adjustments and push the Enter  
button to save the settings.  
3. Exiting the ScreenManager  
(1) To return to the main menu, select the <Return> icon or push the down button  
twice, followed by the Enter button.  
(2) To exit the ScreenManager, select <Exit> icon or push the down button twice,  
followed by the Enter button.  
16 3. ScreenManager  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
NOTE  
Double clicking the Enter button at any time also exits the ScreenManager menu.  
3-2. Adjustments and Settings  
The following table shows all the ScreenManager’s adjustment and setting menus.  
“*” indicates adjustments of analog input only and “**” indicates digital input only.  
Main menu  
Sub menu  
Reference  
Screen  
Clock  
*
*
*
4-1. Screen Adjustment (p.20)  
Phase  
Position  
Smoothing  
Contrast  
/Brightness  
Range Adjustment  
Color Mode  
Custom  
Temperature  
Saturation  
Hue  
ColorManagement  
*
4-2. Color Adjustment (p.24)  
Gain  
Reset  
sRGB  
Sound  
Volume  
Control the sound volume.  
Mute the sound.  
Mute  
PowerManager  
DVI DMPM  
VESA DPMS  
Sound  
** 4-3. Power-save Setup (p.25)  
*
Others  
Input Signal  
Set the input signal selection of  
automatic or manual (p.19)  
Off Timer  
Set the monitor’s off timer to on or off  
(p.18)  
VGA Selection  
Menu Position  
Translucent  
Menu Off Timer  
Reset  
Select the display mode. (p.29)  
Adjust the menu position.  
Set the transparency of the menu.  
Set the menu displaying time.  
Return to the factory default settings.  
(p.33)  
Information  
Language  
Information  
Review the ScreenManager’s settings,  
model name, serial number and usage  
time*1.  
English, German,  
French, Spanish,  
Italian, Swedish and  
Japanese  
Select the ScreenManager’s language.  
*1 Due to the inspection on the factory, the usage time may not “0 hour” at shipping.  
3. ScreenManager 17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
3-3. Useful Functions  
Adjustment Lock  
Use the “Adjustment Lock” function to prevent any accidental changes.  
Locked function  
Auto adjustment button adjustments and settings in the  
ScreenManager.  
Unlocked function  
Adjustment of contrast and brightness by the control buttons.  
Sound control by the control buttons.  
Input signal selection button  
To lock  
Switch off the monitor’s power by the power switch. Press on the Auto adjustment  
button while switching on the monitor’s power.  
To unlock  
Switch off the monitor’s power by the power switch, then hold down the Auto  
adjustment button once again and turn the power back on.  
Off Timer  
The off timer function causes the monitor to automatically enter a power off state after  
a predetermined amount of time has lapsed. This function was created to reduce  
afterimage (p.34) characteristics that are particular to LCD monitors when the monitor  
screen is left on for a long period without use.  
[Procedure]  
(1) Select <Off Timer> in the ScreenManager <Others> menu.  
(2) Select “Enable” and press the right and left buttons to adjust the “On Period” (1 to  
23 hours).  
[Off timer system]  
PC  
Monitor  
LED  
On Period (1H - 23H)  
Last 15 min. in "On period"  
"On period" expired  
Operation  
Blue  
Advance Notice *1  
Blue Flashing  
Off  
Power off  
*1  
Advance notice (LED flashing blue) will be given 15 minutes before the monitor  
automatically enters the “Power Off” mode. To delay entering the “Power Off” mode, press  
the power switch during the advance notice period. The monitor will continue to operate for  
an additional 90 minutes.  
[Procedure]  
Press the power switch.  
NOTE  
The off timer function works while the PowerManager is active, but there is no  
advance notice before the monitor’s power is switched off.  
18 3. ScreenManager  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
EIZO Logo disappearing function  
When switching on the power button on the front panel, the EIZO logo is displyed for a  
while. If you desire to display or undisplay this logo, use this function. (Default is logo  
appearing.)  
To undisplay  
Switch off the monitor’s power by the power switch, then hold down the Enter  
button once again and turn the power back on.  
To display  
Switch off the monitor’s power by the power switch, then hold down the Enter  
button once again and turn the power back on.  
Automatically selecting the input signal function  
The monitor will automatically detect the inputted signal of either the connection for  
display.  
Connecting two PCs to the monitor  
When the one computer is switched off or entering the power saving mode, the monitor  
will automatically dislay the other signal.  
Use the ScreenManager to switch the input selection to manual.  
[Procedure]  
(1) Select <Input Signal> in the <Others> menu.  
(2) Select <Manual>.  
3. ScreenManager 19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
4. ADJUSTMENT  
The monitor displays the digital input image correctly based on its pre-setting  
data. Adjust the contrast and brightness (p.23).  
4-1. Screen Adjustment  
Screen adjustments for the LCD monitor should be used in suppressing screen flickering  
and also for adjusting the screen to its proper position. There is only one correct  
position for each display mode. It is also recommended to use the ScreenManager  
function when first installing the display or whenever changing the system.  
Adjustment Procedure  
NOTE  
Allow the LCD monitor to stabilize for at least 20 minutes before making image  
adjustments.  
1. Push the Auto adjustment button on the front panel.  
The message “Your setting will be lost, if you press again now.” appears and  
remains on the screen for 5 seconds. While the message is on the screen, push the  
Auto adjustment button again to automatically adjust the clock, phase, and screen  
position. If you do not wish to do adjust the screen, do not push the Auto  
adjustment button again.  
If the appropriate screen can not be made by using the Auto adjustment  
button, adjust the screen through the following procedures. If the  
appropriate screen can be made, proceed to step 4.  
2. We recommend setting the desktop pattern to that as shown in the  
diagram below.  
NOTE  
More precise adjustment is available for using the “Screen Adjustment  
program” utility software. It can be downloaded from the EIZO homepage  
(http://www.eizo.com/).  
20 4. ADJUSTMENT  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
3. Adjust by using <Screen> menu in the ScreenManager.  
(1) Vertical bars appear on the screen  
Use the <Clock> (p.34) adjustment.  
Select the <Clock> and eliminate the vertical bars by using the right and left of  
the control buttons.  
Do not continuously press the control buttons, as the adjustment value will  
change quickly and make it difficult to locate the most suitable adjustment  
point. If the horizontal flickering, blur or bars appear, proceed to <Phase>  
adjustment as follows.  
NOTE  
When adjusting the “Clock,the horizontal screen size will also change.  
(2) Horizontal bars appear on the screen.  
Use the <Phase> (p.35) adjustment.  
Select the <Phase> and eliminate the horizontal flickering, blurring or bars by  
using the right and left buttons.  
NOTE  
Horizontal bars may not completely disappear from the screen depending on  
the PC.  
(3) The screen position is incorrect.  
Use the <Position> adjustment.  
The correct displayed position of the monitor is decided because the number  
and the position of the pixels are fixed. The “Position” adjustment moves the  
image to the correct position.  
Select <Position> and adjust the position by using the up, down, right and left  
buttons.  
If vertical bars of distortion appear after finishing the <Position> adjustment,  
return to <Clock> adjustment and repeat the previously explained adjustment  
procedure. ClockPhasePosition  
4. ADJUSTMENT 21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
4. To adjust the output signal range (Dynamic Range) of the signal.  
Use the <Range Adjustment> (p.35)of  
<ColorManagerment> menu.  
This controls the level of output signal range to display the whole color gradation  
(256 colors).  
[Procedure 1]  
Push the Auto adjustment button on the front panel while displaying the <Range  
Adjustment> menu to automatically adjust the range. The screen blanks for a  
moment, and adjusts the color range to display the whole color gradation of the  
current output signal.  
[Procedure 2]  
Pressing Auto adjustment button while displaying the contrast/brightness  
adjustment screen (appeared by pressing the control buttons directly) adjusts the  
range automatically. (Contrast and Brightness will not be adjusted.)  
5. To smooth the blurred texts of the enlarged screen of the lower  
resolutions.  
Switch the <Smoothing> setting.  
Select the suitable level from 1 – 5 (Soft – Sharp).  
Select <Smoothing> in the <Screen> menu and adjust by using the right and left  
buttons.  
NOTE  
The “Smoothing” is disabled in the resolution 1280 x 1024.  
Since the displayed image is enlarged, the blurred texts may not be  
necessarily lost completely.  
22 4. ADJUSTMENT  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
6. To set the Contrast of the screen.  
Use the <Contrast> adjustment.  
This controls the brightness for the each color (red, blue and green) at the same  
time.  
Select <Contrast/Brightness> and adjust by using the right and left buttons.  
NOTE  
Percentage except 100 % may cause undisplayable color tone.  
During selecting the <sRGB> of <ColorManagement>, contrast cannot be  
adjusted.  
7. To Set the Brightness of the screen.  
Use the <Contrast> adjustment.  
The brightness of the entire screen is controlled by changing the brightness of the  
backlight.  
Select <Contrast/Brightness> in the screen menu and adjust by using the up and  
down buttons.  
NOTE  
Directly pressing the up and down buttons also adjusts the contrast and  
brightness. Press the “Enter” button to save and exit the settings after the  
adjustment.  
4. ADJUSTMENT 23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
4-2. Color Adjustment  
The <ColorManagement> menu in the ScreenManager enables to change the color of  
the screen. By using the <Color Mode>, the adjustment mode can be selected from  
<Custom mode> (to adjust the color settings according to your preference) and <sRGB>  
mode.  
In the analog input, perform the “Range Adjustment” (p.22) before making the  
color adjustments.  
NOTE  
Allow the LCD monitor to stabilize for at least 20 minutes before making image  
adjustments. (Allow the monitor to warm up for at least 20 minutes before making  
adjustments.)  
Performing the <Reset> of the <ColorManagement> menu returns the color settings  
to the default settings (Except <Range Adjustment> settings).  
The values shown in percentages represent the current level within the specific  
adjustment. They are available only as a reference tool. (To create an uniform white  
or black screen, the percentages for each will probably not be the same.)  
<Custom> mode: To adjust the color settings according  
to your preference  
To set the color temperature (p.34)  
Set the <Temperature>.  
The <Temperature> can be set from 4,000 K to 10,000 K, in 500 K increments  
(including 9,300 K). Default setting is off (normal white).  
NOTE  
The values shown in the Kelvin are available only as a reference tool.  
Setting the temperature under 4,000 K or over 10,000 K invalidates the color  
temperature setting. (The color temperature’s setting turns “OFF”.)  
To change the saturation  
Use the <Saturation> adjustment.  
The <Saturation> can be selected from –128 to 127. Setting the minimum level  
(-128) turns the image to the monochrome.  
NOTE  
The “Saturation” adjustment may cause undisplayable color tone.  
To change the flesh color, etc.  
Use the <Hue> adjustment  
The <Hue> can be selected from - 32 to 32.  
24 4. ADJUSTMENT  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
NOTE  
The “Hue” adjustment may cause undisplayable color tone.  
To change each color (red, green and blue).  
Use the <Gain> (p.34)adjustment.  
By adjusting the red, green and blue color tones for each mode, custom colors can  
be defined. The 100 % indicates unadjusted condition. Display a white or gray  
background image and adjust the <Gain>.  
NOTE  
The values shown in the percentage are available only as a reference tool.  
To select <sRGB>  
Select <sRGB> from the <Color Mode>  
During selecting the <sRGB>, color and contrast cannot be adjusted.  
4-3. Power-save Setup  
The <PowerManager> menu in the ScreenManager enables to set the power-save setup.  
NOTE  
Do your part to conserve energy, turn off the monitor when you are finished using it.  
Disconnecting the monitor from the power supply is recommended to save energy  
completely.  
Analog input  
This monitor complies with the VESA DPMS (p.35).  
[Procedure]  
(1) Set the PC’s power saving settings.  
(2) Select “VESA DPMS” from the <PowerManager> menu.  
[Power saving system]  
PC  
Monitor  
LED  
Operation  
Operation  
Blue  
STAND-BY  
SUSPEND  
OFF  
Power saving  
Power saving  
Yellow  
[Procedure]  
Operate the mouse or keyboard to return to a normal screen.  
4. ADJUSTMENT 25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
Digital input  
This monitor complies with the DVI DMPM (p.34).  
[Procedure]  
(1) Set the PC’s power saving settings.  
(2) Select “DVI DMPM” from the “PowerManager” menu.  
[Power saving system]  
PC  
Monitor  
LED  
Operation  
Operation  
Blue  
Power saving  
Power saving  
Power saving*1  
Yellow  
Flashing yellow (2  
times for each)  
Off mode  
*1  
Power saving through the PC’s off mode is only supported when  
“Manual” is selected on the ScreenManager’s <Input Signal>.  
[Procedure]  
Operate the mouse or keyboard to return to a normal screen from the Power save mode  
of the PC.  
Power on the PC to return a normal screen from the Off mode of the PC.  
Power save for speaker  
When the monitor is in the power-saving mode, sound of speaker also erases  
simultaneously can be performed.  
[Procedure]  
(1) Set the PC’s power saving settings.  
(2) Select <Sound>.  
(3) Select “Disable”. (“Enable” is selected to leave sound.)  
26 4. ADJUSTMENT  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
5. ATTACHING AN ARM STAND  
The LCD monitor can be used with an arm stand by removing the tilt stand and  
attaching the arm stand to the LCD monitor.  
NOTE  
Use an arm stand that satisfies the followings.  
-
When using the LCD monitor with an arm stand, the arm stand must be VESA  
approved :  
* Use an arm stand with a 100 mm x 100 mm hole spacing on the arm mounting  
pad.  
* Weight: Use an arm stand that is able to support an object weighting 13.5 kg  
(29.8 lbs.).  
- Use an arm stand with sufficient stability (mechanical firmness) to support the  
weight of the monitor.  
- Use an arm stand remaining that position where it is manually moved.  
- Use an arm stand with the ability to tilt the monitor forward and backward.  
Please connect cables after attaching an arm stand.  
Setup Procedure  
1. Lay the LCD monitor down. Do not scratch the panel.  
2. Remove the tilt stand by loosening the screws (2 pcs of M4 x 10  
mm).  
3. Attach an arm stand to the LCD monitor securely.  
Arm-stand  
4 Mounting Screws (enclosed): M4 x 12 mm  
5. ATTACHING AN ARM STAND 27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
6.TROUBLESHOOTING  
If a problem persists even after applying the suggested remedies, contact an EIZO dealer.  
No picture problems : See No.1 ~ No.2  
Imaging problems : See No.3 ~ No.11  
Other problems : See No.12 ~ No.14  
Problems  
Points to check with possible solutions  
Check that the power cord is correctly  
connected. If the problem persists, turn off the  
monitor power for a few minutes, then turn it  
back on and try again.  
1. No picture  
Indicator status: Off  
Check the “Contrast and Brightness” settings.  
Indicator status: Blue  
Switch the signal input by pressing the input  
signal selection button on the front control  
panel.  
Indicator status: Yellow  
Try pressing a key on the keyboard, or clicking  
the mouse. (p.25)  
Indicator status: Flashing yellow  
(2 times for each)  
Try pressing the power of the computer.  
These message appear when the signal is not  
inputted correctly, even if the monitor functions  
properly.  
2. Following messages appear. (Error  
messages shown below will remain  
on the screen for 40 seconds.)  
When the image is displayed correctly after a  
short time, there is no problem with the  
monitor. (Some PCs do not output the signal  
soon after powering on.)  
Check that the PC is turned ON.  
Check that the signal cable is properly  
connected to the PC or graphics board.  
Switch the signal input by pressing the input  
signal selection button on the front control  
panel.  
Use the graphics board’s utility software to  
change the frequency setting. (Refer to the  
manual of the graphics board.)  
Whenever an error signal message  
appears, the signal frequency will be  
displayed in red. (Example)  
28 6. TROUBLESHOOTING  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
Problems  
Points to check with possible solutions  
Adjust the image position using the <Position>  
3. Display position is incorrect.  
(p.21)  
The two display modes, VGA 720 x 400 (70  
Hz) and 320 x 200 (70 Hz), have the same  
signal timings. Using this adjustment selects the  
appropriate display mode. (This function effects  
only when the resolution is VGA 720 x 400 (70  
Hz) or 320 x 200 (70 Hz).  
If the problem persists, use the graphics board’s  
utility software to change the display position if  
available.  
Decrease the vertical bars using the <Clock>.  
4. Vertical bars of distortion appear.  
5. Horizontal bars of distortion appear.  
(p.21)  
Decrease the horizontal bars using the <Phase>.  
(p.21)  
Switch the <Smoothing> mode to “Off”. (p.22)  
6. Letters and lines appear blurred.  
7. The screen is too bright or too dark.  
Adjust the <Contrast and brightness> (The  
baklight of the LCD monitor has a fixed life  
span. When the screen becomes dark or begins  
to flicker, please consult your dealer.)  
When the screen image is changed after  
displaying the same image for a long period, an  
afterimage may appear. The “Afterimage” can  
be removed gradually by changing the displayed  
image.Use the “Off Timer” function and avoid  
keeping the screen on all the time.(p.18)  
8. Afterimages appear.  
This is due to the characteristics of the panel  
9. The screen has defective pixels  
(e.g. slightly light or dark).  
itself, and not the LCD product.  
6. TROUBLESHOOTING 29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
Problems  
Points to check with possible solutions  
Leaving the screen white may solve the  
10. Fingerprints remain on the screen.  
problem.  
<Smoothing> is disabled when the screen is  
11. The <Smoothing> cannot be  
selected.  
displayed in the 1280 x 1024.  
The adjustment lock is probably on. To unlock:  
switch the LCD monitor off. Then, while  
pressing the Auto adjustment button switch, the  
power on. (p.18)  
12. The Enter button does not operate.  
The adjustment lock is probably on. To unlock:  
switch the LCD monitor off. Then, while  
pressing the Auto adjustment button switch, the  
power on. (p.18)  
13. The Auto adjustment button does  
not operate.  
The Auto sizing function is intended for use on  
the Macintosh and on AT-compatible PC  
running Windows. It may not work properly in  
either of the following cases.  
When running an AT-compatible PC on MS-  
DOS (Not windows).  
The background color for the “wall paper” or  
“desktop” pattern is set to black.  
Some signals from a graphics board may not  
function properly.  
The computer with digital may be in the off  
mode (power indicator flashing yellow). Try to  
press the monitor’s power switch and press the  
input signal selection button again.  
14. The signal selection button does  
not operate.  
30 6. TROUBLESHOOTING  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
7. CLEANING  
Periodic cleaning is recommended to keep the monitor looking new and to prolong its  
operation lifetime.  
NOTE  
Never use thinner, benzene, alcohol (ethanol, methanol, or isopropyl alcohol),  
abrasive cleaners, or other strong solvents, as these may cause damage to the  
cabinet or LCD panel.  
Cabinet  
To remove stains, wipe the cabinet with a soft, lightly moistened cloth using a mild  
detergent. Do not spray wax or cleaner directly into the cabinet. (For details, refer to the  
manual of the PC.)  
LCD Panel  
The LCD surface can be cleaned with a soft cloth, such as cotton or lens paper.  
If necessary, stubborn stains can be removed by moistening part of a cloth with water  
to enhance its cleaning power.  
7. CLEANING 31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
8. SPECIFICATIONS  
LCD Panel  
43 cm (17.0 inch), TFT color LCD panel with Anti-Glare  
Hard Coating  
Viewing Angle: H: 170°, V: 170°  
0.264 mm  
Dot Pitch  
Horizontal Scan Frequency 24.8 kHz - 80 kHz (Automatic) (Digital): 31.5~64 kHz  
Vertical Scan Frequency  
50 Hz ~75 Hz (Automatic)  
(Digital): 60Hz, (VGA Text : 70Hz)  
1280 dots x 1024 lines  
Resolution  
Dot Clock (Max.)  
Display Colors  
Display Area  
135 MHz (Digital: 108 MHz)  
16 million colors (max.)  
338 mm (H) ×270 mm (V) (13.3” (H) x 10.6” (V))  
(Viewable image size: 432 mm (17.0”))  
100-120/200-240 VAC±10%, 50/60 Hz, 0.7 A/0.4 A  
Max.: 45W  
Power Supply  
Power Consumption  
Power Saving Mode: Less than 3 W  
D-Sub mini 15 pin, DVI-D  
Input Connector  
Analog Input Signal (Sync) Separate, TTL, Positive/Negative  
Analog Input Signal (Video)  
Input Signal (Digital)  
Signal registration  
Plug & Play  
0.7Vp-p/75Positive  
TMDS (Single Link)  
Analog: 30 (Factory preset: 20)  
VESA DDC 2B  
Amplifier Output (max.)  
Line input  
1 W + 1 W  
Input impeadance 47 k(typ)  
Input sensitivity: 500 mV  
2 mW + 2 mW at Amplifier output 1 W + 1 W  
380 mm (W) x 416 mm (H) x 178 mm (D)  
(15.0”(W) x 16.4”(H) x 7.0”(D))  
Headphone output level  
Dimensions  
Dimensions (without stand) 380 mm (W) x 353 mm (H) x 58 mm (D)  
(15.0”(W) x 13.9”(H) x 2.3”(D))  
Weight  
5.8 kg (12.8 lbs.)  
Weight (without stand)  
Temperature  
4.5 kg (9.9 lbs.)  
Operating: 0 °C ~ 35 °C (32 °F ~ 95 ° F)  
Storage: -20 °C ~ 60 °C (-4 °F ~ 140 ° F)  
Humidity 30% to 80% R.H. Non-condensing  
Certifications and Standards  
100-120 VAC  
NRTL/C-TÜV, FCC-B, TCO’99*1, EPA ENERGY STAR  
Program, TÜV/Rheinland Ergonomics Approved  
CE, CB, TÜV Rheinland/GS, TCO’99*1, EPA ENERGY  
STAR Program, TÜV/Rheinland Ergonomics Approved  
200-240 VAC  
*1 Applicable to gray (standard) color version only.  
32 8. SPECIFICATIONS  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
Default settings  
Analog input  
100%  
Digital input  
Contrast  
Brightness  
100%  
Smoothing  
3
Color Management  
PowerManager  
Input Signal  
Off Timer  
Custom mode / Off (Normal white)  
VESA DPMS  
Auto  
DVI DMPM  
Disable  
English  
Language  
Dimensions  
Unit mm (inches)  
58(2.3)  
33.5(1.32)  
380(15.0  
)
339.8(13.38)  
33.5  
(1.32)  
1.0(0.04)  
178(7.0)  
160(6.3)  
Pin Assignment  
D-Sub mini 15 pin connector  
4
3
2
1
5
Pin  
No.  
Signal  
Pin  
No.  
Signal  
Pin  
No.  
Signal  
10  
9
8
7
6
11  
14 13 12  
15  
1
2
3
4
5
Red video  
Green video  
Blue video  
Ground  
6
7
8
9
10  
Red ground  
Green ground  
Blue ground  
No pin  
11  
12  
13  
14  
15  
Ground Shorted  
Data (SDA)  
H. Sync  
V. Sync  
Clock (SCL)  
No pin  
Ground Shorted  
DVI-D Connector  
Pin  
No.  
Signal  
Pin  
No.  
Signal  
Pin  
No.  
Signal  
3
1
9
17  
2
4
12  
20  
6
7
8
16  
24  
5
13  
21  
10 11  
19  
14 15  
22 23  
18  
1
2
3
TMDS Data2-  
TMDS Data2+  
TMDS Data2/4  
Shield  
9
10  
11  
TMDS Data1-  
TMDS Data1+  
TMDS Data1/3  
Shield  
17  
18  
19  
TMDS Data0-  
TMDS Data0+  
TMDS Data0/5  
Shield  
4
5
6
7
8
NC*  
NC  
12  
13  
NC  
NC  
+5V Power  
20  
21  
NC  
NC  
DDC Clock (SCL) 14  
DDC Data (SDA) 15 Ground (For +5V) 23  
Analog Vertical  
Sync  
22 TMDS Clock shield  
TMDS Clock+  
TMDS Clock-  
16  
Hot Plug Detect  
24  
(*NC: No Connection)  
8. SPECIFICATIONS 33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
9. GLOSSARY  
Afterimage  
The Afterimage is particular to LCD monitors when the monitor screen is left on for  
a long period without use. The “Afterimage” can be removed gradually by changing  
the displayed image.  
Clock  
With the analog input signal display, the analog signal is converted to a digital signal  
by the LCD circuitry. To convert the signal correctly, the LCD monitor needs to  
produce the same number clock pulse as the dot clock of the graphics system. When  
the clock pulse is not correctly set, some vertical bars of distortion are displayed on  
the screen.  
Color Temperature (Temperature)  
Color Temperature is a method to measure the white color tone, generally indicated  
in degrees Kelvin. At high temperatures the white tone appears somewhat blue, while  
at lower temperatures it appears somewhat red. Computer monitors generally give  
best performance at high temperature settings.  
5,000 K: Slightly reddish white.  
6,500 K: Warm-white tone, similar to white paper or daylight.  
9,300 K: Slightly bluish white.  
DVI  
(Digital Visual Interface)  
A digital flat panel interface. DVI can transmit digital data from the PC directly  
without loss with the signal transition method “TMDS”.  
There are two kinds of DVI connectors. One is DVI-D connector for digital signal  
input only. The other is DVI-I connector for both digital and analog signal inputs.  
DVI DMPM  
(DVI Digital Monitor Power Management)  
The Power management system for the digital interface. The “Monitor ON” status  
(operation mode) and the “Active Off” status (power-saving mode) are indispensable  
for the DVI-DMPM as the monitor’s power mode.  
Gain Adjustment  
Adjusts each color parameter for red, green and blue. The color of the LCD monitor  
is displayed through the color filter of the LCD panel. Red, green and blue are the  
three primary colors. The colors on the monitor are displayed by combining these  
three colors. The color tone can change by adjusting the illumination amount passed  
through each color’s filter.  
34 9. GLOSSARY  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
Phase  
The phase adjustment decides the sampling timing point for converting the analog  
input signal to a digital signal. Adjusting the phase after the clock adjustment will  
produce a clear screen.  
Range Adjustment  
The Range Adjustment controls the level of output signal range to display the whole  
color gradation.  
Resolution  
The LCD panel consists of a fixed number of pixel elements which are illuminated to  
form the screen image. The EIZO L565 display panel consists of 1280 horizontal  
pixels and 1024 vertical pixels. At a resolution of 1280 x 1024, all pixels are  
displayed as a full screen.  
sRGB (Standard RGB)  
"International Standard for Red, Green, and Blue color space" A color space was  
defined with the aim of the color matching between applications and hardware  
devices, such as monitors, scanners, printers and digital cameras. As a standard  
default space, sRGB allows Internet users to closely match colors.  
TMDS  
(Transition Minimized Differential Signaling)  
A signal transition method for the digital interface.  
VESA DPMS  
(Video Electronics Standard Association - Display Power Management Signaling)  
The acronym VESA stands for “Video Electronics Standards Association”, and  
DPMS stands for “Display Power Management Signaling.”DPMS is a communication  
standard that PCs and graphics boards use to implement power savings on the  
monitor side.  
9. GLOSSARY 35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
APPENDIX/ANHANG/ANNEXE  
Preset Timing Chart for Analog input  
Timing-Übersichten für Analog Eingang  
Synchronisation des Signaux pour Analog numerique  
Based on the signal diagram shown below 20 factory presets have been registered in the  
monitor's microprocessor.  
Der integrierte Mikroprozessor des Monitors unterstützt 20 werkseitige  
Standardeinstellungen (siehe hierzu die nachfolgenden Diagramme).  
20 signaux ont été enregistrés en usine dans le microprocesseur du moniteur,  
conformément au diagramme de synchronisation ci-dessous.  
A
B
C
D
E
F
Front Porch  
Sync Period  
Vordere Schwarzschulter  
Synchronimpuls  
Front avant  
Délai de synchronisation  
Front arrière  
Back Porch  
Hintere Schwartzschulter  
Austastzeit  
Blanking Period  
Display period  
Total cycle  
Délai de clignotement  
Délai d’affichage  
Cycle total  
Displya-Zeit  
Kompletter Zyklus  
Sync-Signalpegel  
H
Sync signal level  
Niveau du signal de  
synchronisation  
V
Video signal level  
Video-Signalpegel  
Niveau du signal vidéo  
APPENDIX/ANHANG/ANNEXE  
i
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dot  
Clock  
MHz  
Sync Polarity  
Frequencies  
H kHz V Hz  
A: Front Porch  
B: Sync Period  
Mode  
VGA  
H
V
H µs/Dot  
V ms/Line H µs/ Dot V ms/ Line  
25.2 Nega. Nega.  
31.47  
31.47  
35.00  
49.73  
68.68  
74.76  
37.86  
37.50  
35.16  
37.88  
48.08  
46.88  
48.36  
56.48  
60.02  
60.00  
67.50  
63.98  
79.98  
31.47  
59.94  
70.09  
66.67  
74.55  
75.06  
74.76  
72.81  
75.00  
56.25  
60.32  
72.19  
75.00  
60.00  
70.07  
75.03  
60.00  
75.00  
60.02  
75.03  
70.09  
0.636/  
16  
0.318/  
10  
3.813/  
96  
0.054/  
2
640 × 480  
VGA  
720 × 400  
28.3 Nega. Posi.  
0.636/  
18  
0.381/  
12  
3.813/  
108  
0.064/  
2
Macintosh  
640 × 480  
30.2 Posi.  
57.3 Posi.  
100.0 Posi.  
126.2 Posi.  
Posi.  
Posi.  
Posi.  
Posi.  
2.116/  
64  
0.086/  
3
2.116/  
64  
0.086/  
3
Macintosh  
832 × 624  
0.559/  
32  
0.020/  
1
1.117/  
64  
0.060/  
3
Macintosh  
1152 × 870  
0.320/  
32  
0.044/  
3
1.280/  
128  
0.044/  
3
Macintosh  
1280×960  
0.190/  
24  
0.013/  
1
1.204/  
152  
0.0401/  
3
VESA  
640 × 480  
31.5 Nega. Nega.  
31.5 Nega. Nega.  
0.508/  
16  
0.026/  
1
1.270/  
40  
0.079/  
3
VESA  
640 × 480  
0.508/  
16  
0.027/  
1
2.032/  
67  
0.080/  
3
VESA  
800 × 600  
36.0 Posi.  
40.0 Posi.  
50.0 Posi.  
49.5 Posi.  
Posi.  
Posi.  
Posi.  
Posi.  
0.667/  
24  
0.028/  
1
2.000/  
72  
0.057/  
2
VESA  
800 × 600  
1.000/  
40  
0.026/  
1
3.200/  
128  
0.106/  
4
VESA  
800 × 600  
1.120/  
56  
0.770/  
37  
2.400/  
120  
0.125/  
6
VESA  
800 × 600  
0.323/  
16  
0.021/  
1
1.616/  
80  
0.064/  
3
VESA  
1024 × 768  
65.0 Nega. Nega.  
75.0 Nega. Nega.  
0.369/  
24  
0.062/  
3
2.092/  
136  
0.124/  
6
VESA  
1024 × 768  
0.320/  
24  
0.053/  
3
1.813/  
136  
0.106/  
6
VESA  
1024 × 768  
78.8 Posi.  
60.0 Posi.  
108.0 Posi.  
108.0 Posi.  
135.0 Posi.  
Posi.  
Posi.  
Posi.  
Posi.  
Posi.  
0.203/  
16  
0.017/  
1
1.219/  
96  
0.050/  
3
VESA  
1280 x 960  
0.889/  
96  
0.017/  
1
1.037/  
112  
0.050/  
3
VESA  
1152 × 864  
0.593/  
64  
0.015/  
1
1.185/  
128  
0.044/  
3
VESA  
1280 × 1024  
0.444/  
48  
0.016/  
1
1.037/  
112  
0.047/  
3
VESA  
1280 × 1024  
0.119/  
16  
0.013/  
1
1.067/  
144  
0.038/  
3
VGA Graphics  
320 x 200  
21.2 Nega. Posi  
0.336/  
16  
0.381/  
12  
3.813/  
96  
0.064/  
2
ii  
APPENDIX/ANHANG/ANNEXE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
C: Back Porch  
D: Blanking Period  
E: Display Period  
F:Total Cycle  
H µs/ Dot  
V ms/ Line  
H µs/ Dot  
V ms/ Line  
H µs/ Dot  
V ms/ Line  
H µs/ Dot  
V ms/ Line  
1.907/  
48  
1.049/  
33  
6.356/  
160  
1.430/  
45  
25.442/  
640  
15.253/  
480  
31.778/  
800  
16.683/  
525  
1.907/  
54  
1.112/  
35  
6.355/  
180  
1.557/  
49  
25.422/  
720  
12.711/  
400  
31.778/  
900  
14.267/  
449  
3.175/  
96  
1.114/  
39  
7.407/  
224  
1.286/  
45  
21.164/  
640  
13.714/  
480  
28.571/  
864  
15.000/  
525  
3.911/  
224  
0.784/  
39  
5.587/  
320  
0.865/  
43  
14.525/  
832  
12.550/  
624  
20.112/  
1152  
13.414/  
667  
1.440/  
144  
0.568/  
39  
3.040/  
304  
0.655/  
45  
11.520/  
1152  
12.667/  
870  
14.560/  
1456  
13.322/  
915  
1.838/  
232  
0.482/  
36  
3.233/  
408  
0.535/  
40  
10.143/  
1280  
12.841/  
960  
13.376/  
1688  
13.379/  
1000  
3.810/  
120  
0.528/  
20  
5.587/  
176  
0.634/  
24  
20.317/  
640  
12.678/  
480  
26.413/  
832  
13.735/  
520  
3.810/  
120  
0.427/  
16  
6.349/  
200  
0.533/  
20  
20.317/  
640  
12.800/  
481  
26.667/  
840  
13.333/  
500  
3.556/  
128  
0.626/  
22  
6.222/  
224  
0.711/  
25  
22.222/  
800  
17.067/  
600  
28.444/  
1024  
17.778/  
625  
2.200/  
88  
0.607/  
23  
6.400/  
256  
0.739/  
28  
20.000/  
800  
15.840/  
600  
26.400/  
1056  
16.579/  
628  
1.280/  
64  
0.478/  
23  
4.800/  
240  
1.373/  
66  
16.000/  
800  
12.480/  
600  
20.800/  
1040  
13.853/  
666  
3.232/  
160  
0.448/  
21  
5.172/  
256  
0.533/  
25  
16.162/  
800  
12.800/  
600  
21.333/  
1056  
13.333/  
625  
2.462/  
160  
0.600/  
29  
4.923/  
320  
0.786/  
38  
15.754/  
1024  
15.880/  
768  
20.677/  
1344  
16.666/  
806  
19.20/  
144  
0.513/  
29  
4.053/  
304  
0.673/  
38  
13.653/  
1024  
13.599/  
768  
17.707/  
1328  
14.272/  
806  
2.235/  
176  
0.466/  
28  
3.657/  
288  
0.533/  
32  
13.003/  
1024  
12.795/  
768  
16.660/  
1312  
13.328/  
800  
2.889/  
312  
0.600/  
36  
4.815/  
520  
0.667/  
40  
11.852/  
1280  
16.000/  
960  
16.667/  
1800  
16.667/  
1000  
2.370/  
256  
0.0.474/  
32  
4.148/  
448  
0.553/  
36  
10.667/  
1152  
12.800  
864  
14.815  
1600  
13.333/  
900  
2.296/  
248  
0.594/  
38  
3.778  
408  
0.656/  
42  
11.852/  
1280  
16.005/  
1024  
15.630/  
1688  
16.661/  
1066  
1.837/  
248  
0.475/  
38  
3.022/  
408  
0.525/  
42  
9.481/  
1280  
12.804/  
1024  
12.504/  
1688  
13.329/  
1066  
1.907/  
48  
1.112/  
35  
6.356/  
160  
1.557/  
49  
25.422/  
640  
12.711/  
400  
31.778/  
800  
14.268/  
449  
APPENDIX/ANHANG/ANNEXE iii  
Download from Www.Somanuals.com. All Manuals Search And Download.  
[Applicable to gray (standard color version only).]  
Congratulations!  
You have just purchased a TCO’99 approved and labelled product!  
Your choice has provided you with a product developed for  
professional use. Your purchase has also contributed to reducing  
the burden on the environment and also to the further development  
of environmentally adapted electronics products.  
Why do we have environmentally labelled computers?  
In many countries, environmental labelling has become an established method for encouraging  
the adaptation of goods and services to the environment. The main problem, as far as computers  
and other electronics equipment are concerned, is that environmentally harmful substances are  
used both in the products and during their manufacture. Since it is not so far possible to  
satisfactorily recycle the majority of electronics equipment, most of these potentially damaging  
substances sooner or later enter nature.  
There are also other characteristics of a computer, such as energy consumption levels, that are  
important from the viewpoints of both the work (internal) and natural (external) environments.  
Since all methods of electricity generation have a negative effect on the environment (e.g. acidic  
and climate-influencing emissions, radioactive waste), it is vital to save energy. Electronics  
equipment in offices is often left running continuously and thereby consumes a lot of energy.  
What does labelling involve?  
This product meets the requirements for the TCO’99 scheme which provides for international  
and environmental labelling of personal computers. The labelling scheme was developed as a  
joint effort by the TCO (The Swedish Confederation of Professional Employees), Svenska  
Naturskyddsforeningen (The Swedish Society for Nature Conservation) and Statens  
Energimyndighet (The Swedish National Energy Administration).  
Approval requirements cover a wide range of issues: environment, ergonomics, usability, emission  
of electric and magnetic fields, energy consumption and electrical and fire safety.  
The environmental demands impose restrictions on the presence and use of heavy metals,  
brominated and chlorinated flame retardants, CFCs (freons) and chlorinated solvents, among  
other things. The product must be prepared for recycling and the manufacturer is obliged to have  
an environmental policy which must be adhered to in each country where the company  
implements its operational policy.  
The energy requirements include a demand that the computer and/or display, after a certain  
period of inactivity, shall reduce its power consumption to a lower level in one or more stages.  
The length of time to reactivate the computer shall be reasonable for the user.  
Labelled products must meet strict environmental demands, for example, in respect of the  
reduction of electric and magnetic fields, physical and visual ergonomics and good usability.  
You will find a brief summary of the environmental requirements met by this product on the  
right. The complete environmental criteria document may be ordered from:  
TCO Development  
SE-114 94 Stockholm, Sweden  
Fax: +46 8 782 92 07  
Email (Internet): [email protected]  
Current information regarding TCO’99 approved and labelled products may also be obtained  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Environmental Requirements  
Flame retardants  
Flame retardants are present in printed circuit boards, cables, wires, casings and housings.  
Their purpose is to prevent, or at least to delay the spread of fire. Up to 30% of the plastic in  
a computer casing can consist of flame retardant substances. Most flame retardants contain  
bromine or chloride, and those flame retardants are chemically related to another group of  
environmental toxins, PCBs. Both the flame retardants containing bromine or chloride and the  
PCBs are suspected of giving rise to severe health effects, including reproductive damage in  
fish-eating birds and mammals, due to the bio-accumulative* processes. Flame retardants have  
been found in human blood and researchers fear that disturbances in foetus development may  
occur.  
The relevant TCO’99 demand requires that plastic components weighing more than 25 grams  
must not contain flame retardants with organically bound bromine or chlorine. Flame  
retardants are allowed in the printed circuit boards since no substitutes are available.  
Cadmium**  
Cadmium is present in rechargeable batteries and in the colour-generating layers of certain  
computer displays. Cadmium damages the nervous system and is toxic in high doses.  
The relevant TCO’99 requirement states that batteries, the colour-generating layers of display  
screens and the electrical or electronics components must not contain any cadmium.  
Mercury**  
Mercury is sometimes found in batteries, relays and switches. It damages the nervous system  
and is toxic in high doses.  
The relevant TCO’99 requirement states that batteries may not contain any mercury. It also  
demands that mercury is not present in any of the electrical or electronics components  
associated with the labelled unit.  
CFCs (freons)  
The relevant TCO’99 requirement states that neither CFCs nor HCFCs may be used during  
the manufacture and assembly of the product. CFCs (freons) are sometimes used for washing  
printed circuit boards. CFCs break down ozone and thereby damage the ozone layer in the  
stratosphere, causing increased reception on earth of ultraviolet light with e.g. increased risks  
of skin cancer (malignant melanoma) as a consequence.  
Lead**  
Lead can be found in picture tubes, display screens, solders and capacitors. Lead damages the  
nervous system and in higher doses, causes lead poisoning.  
The relevant TCO’99 requirement permits the inclusion of lead since no replacement has yet  
been developed.  
* Bio-accumulative is defined as substances which accumulate within living organisms.  
** Lead, Cadmium and Mercury are haevy metals which are Bio-accumulative.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
For U.S.A, Canada, etc. (rated 100-120 Vac) Only  
FCC Declaration of Conformity  
We, the Responsible Party  
EIZO NANAO TECHNOLOGIES INC.  
5710 Warland Drive, Cypress, CA 90630  
Phone: (562) 431-5011  
declare that the product  
Trade name: EIZO  
Model: FlexScan L565  
is in conformity with Part 15 of the FCC Rules. Operation of this product is subject to the  
following two conditions: (1) this device may not cause harmful interference, and (2) this  
device must accept any interference received, including interference that may cause undesired  
operation.  
This equipment has been tested and found to comply with the limits for a Class B digital  
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide  
reasonable protection against harmful interference in a residential installation. This  
equipment generates, uses, and can radiate radio frequency energy and, if not installed and  
used in accordance with the instructions, may cause harmful interference to radio  
communications. However, there is no guarantee that interference will not occur in a  
particular installation. If this equipment does cause harmful interference to radio or  
television reception, which can be determined by turning the equipment off and on, the user  
is encouraged to try to correct the interference by one or more of the following measures.  
* Reorient or relocate the receiving antenna.  
* Increase the separation between the equipment and receiver.  
* Connect the equipment into an outlet on a circuit different from that to which the receiver  
is connected.  
* Consult the dealer or an experienced radio/TV technician for help.  
Changes or modifications not expressly approved by the party responsible for compliance  
could void the user’s authority to operate the equipment.  
Note  
Use the attached specified cable below or EIZO signal cable with this monitor so as to keep  
interference within the limits of a Class B digital device.  
- AC Cord  
- Shielded Signal Cable (D-SUB mini 15 pin - D-SUB mini 15 pin, the enclosed signal cable)  
- Stereo mini-jack cable  
Canadian Notice  
This Class B digital apparatus complies with Canadian ICES-003.  
Cet appareil numérique de le classe B est comforme à la norme NMB-003 du Canada.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Hinweis zur Ergonomie :  
Dieser Monitor erfüllt die Anforderungen an die Ergonomie nach EK1-ITB 2000 mit dem  
Videosignal, 1280 Punkte × 1024 Zeilen, RGB analog, 0,7 Vp-p und mindestens 75,0 Hz  
Bildwiederholfrequenz, non interlaced. Weiterhin wird aus ergonomischen Gründen empfohlen,  
die Grundfarbe Blau nicht auf dunklem Untergrund zu verwenden (schlechte Erkennbarkeit,  
Augenbelastung bei zu geringem Zeichenkontrast.)  
Recycle Auskunft  
Die Rücknahme dieses Produktes nach Nutzungsende übernimmt EIZO in Deutschland  
zusammen mit dem Partner von Roll MBB Recycling GmbH.Dort werden die Geräte in ihre  
Bestandteile zerlegt, die dann der Wiederverwertung zugeführt werden. Um einen Abholtermin  
zu vereinbaren und die aktuellen Kosten zu erfahren, benutzen Sie bitte folgende Rufnummer:  
02153-73 35 00. Weitere Informationen finden Sie auch unter der Internet-Adresse:  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Dynex Switch DX HUB23 User Manual
Eiki Projector 3850A User Manual
Electro Voice Portable Speaker B 1150M User Manual
Exido Kitchen Grill 243 045 User Manual
Exmark Lawn Mower 4500 341 User Manual
FujiFilm Digital Camera S2500HD User Manual
Fujitsu Server V490 User Manual
Gardena Lawn Mower 36 A Li User Manual
Gateway Computer Monitor FHD2402 User Manual
Genicom Printer LN45 User Manual