Download from Www.Somanuals.com. All Manuals Search And Download.
English
TABLE OF CONTENTS
PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
1. INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
1-1. Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
1-2. Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
1-3. Controls & Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
2. CABLE CONNECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
2-1. Before Connecting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
2-2. Connecting the Signal Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
2-4. Sound Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
3. ScreenManager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
3-3. FineContrast . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
3-4. Useful Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
4. ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
4-1. Screen Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
4-2. Color Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
4-3. Power-save Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
6. TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
7. CLEANING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
8. SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
9. GLOSSARY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
APPENDIX/ANHANG/ANNEXE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i
TABLE OF CONTENTS 3
Download from Www.Somanuals.com. All Manuals Search And Download.
English
PRECAUTIONS
IMPORTANT!
z This product has been adjusted specifically for use in the region to which it was
originally shipped. If operated outside the region to which it was originally
shipped, the product may not perform as stated in the specifications.
z To ensure personal safety and proper maintenance, please read this section and the
caution statements on the unit (refer to the figure below).
[Location of the Caution Statements]
WARNING
If the unit begins to emit smoke, smells like something is
burning, or makes strange noises, disconnect all power
connections immediately and contact your dealer for advice.
Attempting to use a malfunctioning unit may result in fire, electric
shock, or equipment damage.
Do not open the cabinet or modify the unit.
Opening the cabinet or modifying the unit may result in fire,
electric shock, or burn.
Refer all servicing to qualified service personnel.
Do not attempt to service this product yourself as opening or
removing covers may result in fire, electric shock, or equipment
damage.
4 PRECAUTIONS
Download from Www.Somanuals.com. All Manuals Search And Download.
English
WARNING
Keep small objects or liquids away from the unit.
Small objects accidentally falling through the ventilation slots into
the cabinet or spillage into the cabinet may result in fire, electric
shock, or equipment damage.
If an object or liquid falls/spills into the cabinet, unplug the unit
immediately. Have the unit checked by a qualified service engineer
before using it again.
Place the unit at the strong and stable place.
A unit placed on an inadequate surface may fall and result in
injury or equipment damage.
If the unit falls, disconnect the power immediately and ask your
dealer for advice. Do not continue using a damaged unit. Using a
damaged unit may result in fire or electric shock.
OK
Set the unit in an appropriate location.
Not doing so may result in fire, electric shock, or equipment damage.
z Do not place outdoors.
z Do not place in the transportation system (ship, aircraft, trains,
automobiles, etc.)
z Do not place in a dusty or humid environment.
z Do not place in a location where the steam comes directly on
the screen.
z Do not place near heat generating devices or a humidifier.
To avoid danger of suffocation, keep the plastic packing
bags away from babies and children.
Use the enclosed power cord and connect to the standard
power outlet of your country.
Be sure to remain within the rated voltage of the power cord.
Not doing so may result in fire or electric shock.
To disconnect the power cord, grasp the plug firmly and pull.
OK
Tugging on the cord may damage and result in fire or electric shock.
PRECAUTIONS 5
Download from Www.Somanuals.com. All Manuals Search And Download.
English
WARNING
The equipment must be connected to a grounded main outlet.
Not doing so may result in fire or electric shock.
Use the correct voltage.
z The unit is designed for use with a specific voltage only.
Connection to another voltage than specified in this User’s
Manual may cause fire, electric shock, or equipment damage.
z Do not overload your power circuit, as this may result in fire or
electric shock.
Handle the power cord with care.
z Do not place the cord underneath the unit or other heavy objects.
z Do not pull on or tie the cord.
If the power cord becomes damaged, stop using it. Use of a
damaged cord may result in fire or electric shock.
Never touch the plug and power cord if it begins to thunder.
Touching them may result in electric shock.
When attaching an arm stand, please refer to the user’s
manual of the arm stand and install the unit securely with
the enclosed screws.
Not doing so may cause the unit to become unattached, which may
result in injury or equipment damage. When the unit is dropped,
please ask your dealer for advice. Do not continue using a damaged
unit. Using a damaged unit may result in fire or electric shock.
When reattaching the tilt stand, please use the same screws and
tighten them securely.
Do not touch a damaged LCD panel directly with bare hands.
The liquid crystal that may leak from the panel is poisonous if it
enters the eyes or mouth.
If any part of the skin or body comes in direct contact with the
panel, please wash thoroughly. If some physical symptoms result,
please consult your doctor.
Follow local regulation or laws for safe disposal.
The backlight of the LCD panel contains mercury.
6 PRECAUTIONS
Download from Www.Somanuals.com. All Manuals Search And Download.
English
CAUTION
Handle with care when carrying the unit.
Disconnect the power cord and cables when moving the unit.
Moving the unit with the cord attached is dangerous. It may
result in injury.
When handling the unit, grip the bottom of the unit firmly
with both hands ensuring the panel faces outward before
lifting.
Dropping the unit may result in injury or equipment damage.
OK
Do not block the ventilation slots on the cabinet.
z Do not place any objects on the ventilation slots.
z Do not install the unit in a closed space.
z Do not use the unit laid down or upside down.
Blocking the ventilation slots prevents proper airflow and may
result in fire, electric shock, or equipment damage.
Do not touch the plug with wet hands.
Doing so may result in electrical shock.
Use an easily accessible power outlet.
This will ensure that you can disconnect the power quickly in case
of a problem.
Periodically clean the area around the plug.
Dust, water, or oil on the plug may result in fire.
Unplug the unit before cleaning it.
Cleaning the unit while it is plugged into a power outlet may result
in electric shock.
If you plan to leave the unit unused for an extended period,
disconnect the power cord from the wall sochekt after
turning off the power switch for the safety and the power
conservation.
PRECAUTIONS 7
Download from Www.Somanuals.com. All Manuals Search And Download.
English
LCD Panel
In order to suppress the luminosity change by long-term use and to
maintain the stable luminosity, use of a monitor in lower
brightness is recommended.
The screen may have defective pixels. These pixels may appear as
slightly light or dark area on the screen. This is due to the
characteristics of the panel itself, and not the product.
The backlight of the LCD panel has a fixed life span. When the
screen becomes dark or begins to flicker, please contact your
dealer.
Do not press on the panel or edge of the frame strongly, as this
may result in damage to the screen. There will be prints left on the
screen if the pressed image is dark or black. If pressure is
repeatedly applied to the screen, it may deteriorate or damage
your LCD panel. Leave the screen white to decrease the prints.
Do not scratch or press on the panel with any sharp objects, such
as a pencil or pen as this may result in damage to the panel. Do not
attempt to brush with tissues as this may scratch the LCD panel.
When the monitor is cold and brought into a room or the room
temperature goes up quickly, dew condensation may occur inside
and outside the monitor. In that case, do not turn the monitor on
and wait until dew condensation disappears, otherwise it may
cause some damages to it.
8 PRECAUTIONS
Download from Www.Somanuals.com. All Manuals Search And Download.
English
1. INTRODUCTION
Thank you very much for choosing an EIZO Color Monitor.
1-1. Features
z Dual inputs compliant
z [Horizontal scanning frequency] Analog: 24.8 - 80 kHz
Digital: 31 - 64 kHz
[Vertical scanning frequency]
Analog: 50 - 75.1 Hz
Digital: 59 - 61 Hz (VGA text: 69 - 71 Hz)
[Resolution]
1280 dots × 1024 lines
z Auto Adjustment compliant
z The EIZO LCD Utility Disk enclosed (See readme.txt in the CD-ROM for details.)
z The height adjustable stand incorporated
z Built-in speaker system
1-2. Package Contents
Please contact your local dealer for assistance if any of the listed items are missing or
damaged.
z LCD Monitor
z LIMITED WARRANTY
z Power Cord
z “EIZO LCD Utility Disk” CD-ROM
z User’s Manual (in the CD-ROM)
z Setup Guide
z Signal Cable (MD-C87, analog)
z Signal Cable (FD-C39, digital)
z Stereo Mini-jack Cable
z Mounting Screws: M4 × 12 (mm) × 4 pcs
NOTE
z Please retain the packing materials for future transference.
1. INTRODUCTION 9
Download from Www.Somanuals.com. All Manuals Search And Download.
English
1-3. Controls & Connectors
Front
(1)
FineContrast
Menu
(3)
(2)
Control Panel
(7)
(8) (9) (10)
(5)(6)
(4)
®
Monitor Adjustment menu.
(1) ScreenManager
Volume Control: Press the Right and Left buttons.
Mute: Press the Up or Down button after pressing the
right or left button to display the volume control bar.
Press the Right or Left button to mute off.
(2) Speaker
Connect the Headphone.
(3) Headphone Jack
(Stereo Mini-jack)
Switch the input signals when connecting 2 PCs.
(4) Input Signal
Selection Button
Adjust the screen to appropriate condition automatically
(analog input only).
(5) Auto Adjustment
Button
Select the desired function.
Increase and decrease the adjustment value.
(6) Control Buttons (Up,
Down, Left, Right)
Show the ScreenManager on the screen.Confirm the
setting / adjustment function.Save the adjustment values.
(7) Enter Button
Directly pushing the FineContrast button allows you to
select a FineContrast mode.
(8) FineContrast Button
(9) Power Button
ON or OFF the monitor's power.
Indicate monitor's operation status.
Blue: Operation
Flashing blue: Last 15 min. of operation time before
entering the power off state (p. 20).
Yellow: Power saving mode
Off: Power off
(10) Power Indicator
10 1. INTRODUCTION
Download from Www.Somanuals.com. All Manuals Search And Download.
English
Rear
(15)
(16)
(17)
(13)
(14)
(12)
(11)
(11) Power Connector
Connect the power cord.
(12) External Line In
(Stereo Mini-jack)
Connect the stereo mini-jack cable.
(13) DVI-D Input
Connector
Connect the digital cable (FD-C39).
(14) D-Sub mini 15 pin
Input Connector
Connect the enclosed analog cable (MD-C87).
The LCD monitor can be used with an optional
arm stand by removing the stand (see
“5. ATTACHING AN ARM STAND”).
(15) 4 Holes for Mounting
an Arm-Stand
Allows for connection of a security cable. This
lock supports Kensington’s MicroSaver security
system. For further information, please consult:
Kensington Technology Group
2855 Campus Drive, San Mateo, CA 94403
USA
Tel.: 800-650-4242, x3348, Intl: 650-572-2700,
x3348
Fax: 650-572-9675
(16) Security Lock Slot
(17) Stand (Detachable)
The LCD monitor can be used with an optional
arm stand by removing the stand (see
“5. ATTACHING AN ARM STAND”).
1. INTRODUCTION 11
Download from Www.Somanuals.com. All Manuals Search And Download.
English
2. CABLE CONNECTION
2-1. Before Connecting
Before connecting your monitor to the PC, change the display screen settings
NOTE
z The lower display modes like 640 × 480, automatically enlarge to the maximum
display mode (1280 × 1024), and some lines of the characters may become
z When your computer and display support VESA DDC, the suitable resolution and
the refresh rate are set by just plugging your display into the computer without
any manual settings.
Analog Input
Resolution
Frequency
70 Hz
Dot Clock
Remarks
VGA Graphic
VGA, VESA
Apple Macintosh
VGA TEXT
VESA
320
×
×
×
×
×
×
×
×
×
×
×
×
200
640
640
480
480
400
600
624
768
864
870
960
960
1024
~ 75 Hz
67 Hz
720
70 Hz
800
~ 75 Hz
75 Hz
832
Apple Macintosh
VESA
135 MHz (Max.)
1024
1152
1152
1280
1280
1280
~ 75 Hz
75 Hz
VESA
75 Hz
Apple Macintosh
VESA
60 Hz
75 Hz
Apple Macintosh
VESA
~ 75 Hz
Digital Input
The monitor supports the following resolutions only.
Resolution
Frequency
60Hz
Dot Clock
Remarks
VGA
640
×
×
×
×
×
×
480
720
720
400
480
70Hz
VGA TEXT
VESA Safe Mode
VESA
60Hz
108 MHz (Max.)
800
600
60Hz
1024
1280
768
60Hz
VESA
1024
60Hz
VESA
12 2. CABLE CONNECTION
Download from Www.Somanuals.com. All Manuals Search And Download.
English
2-2. Connecting the Signal Cable
NOTE
z Before connecting the product, set up the monitor after
unfolding the base of the stand.
z Be sure that the power switches of both the PC and the monitor
are OFF.
z How to Adjust the Monitor or Angle Grip both side of the monitor
firmly with both hands and adjust the monitor height or angle as
desired.
1. Plug the signal cable into the connector at the rear of the monitor
and the other end of the cable into the video connector on the PC.
After connecting, secure the connection with the screw-in fasteners.
Analog Input
Power Cord
Signal Cable
MD-C87 (enclosed)
Connector of the PC
PC
Video Output Connector/
D-Sub mini 15 pin
z
z
Standard graphics card
Macintosh G3 (Blue &
White) / G4 (VGA)
MD-C87
Video Output Connector
z
Macintosh
(enclosed) + Adapter (Optional) D-Sub 15 pin
2. CABLE CONNECTION 13
Download from Www.Somanuals.com. All Manuals Search And Download.
English
Digital Input
Power Cord
Signal Cable
FD-C39 (enclosed)
Connector of the PC
PC
Video Output
Connector/ DVI-I
z
z
Macintosh (DVI)
Digital graphics card
NOTE
z The monitor is not compatible with a Power Mac G4/G4 Cube ADC (Apple
Display Connector).
2. Plug the power cord into the power connector on the rear of the
monitor. Then, plug the other end of the cord into a power outlet.
WARNING
Use the enclosed power cord and connect to the
standard power outlet of your country.
Be sure to remain within the rated voltage of the power cord.
Not doing so may result in fire or electric shock.
The equipment must be connected to a grounded main
outlet.
Not doing so may result in fire or electric shock.
14 2. CABLE CONNECTION
Download from Www.Somanuals.com. All Manuals Search And Download.
English
3. Turn on the monitor’s main power and then switch on the PC’s
power.
The monitor’s power indicator will light up (blue).
for advice.
Whenever finished, turn off the PC and the monitor.
NOTE
z Adjust brightness of the screen depending on the brightness of your
environment. Too dark or too bright of a screen can cause eyestrain.
z Be sure to take adequate rests. A 10-minute rest period each hour is
suggested.
2-3. Connecting Two PCs to the Monitor
Two PCs can be connected to the monitor through the DVI and the D-Sub mini 15 pin
connector on the back of the monitor.
Selecting the Active Input
The Input signal selection button on the front panel can be used to select either DVI
or D-Sub as the active input at any time. Every time the button is pressed, the input
changes. When switching the signal, the kind of the input signal (Analog or Digital) is
displayed for a few seconds on the right top corner of the screen.
Input Signal Selection Button
2-4. Sound Connections
NOTE
z Always switch the monitor and audio devices or computers off whenever connecting
or disconnecting any audio devices (computer or CD player) to the monitor.
z Use the enclosed stereo mini-jack cable for connecting audio devices or
computers to the monitor.
1. Connect the stereo mini-jack cable to the external line in of the
monitor.
2. CABLE CONNECTION 15
Download from Www.Somanuals.com. All Manuals Search And Download.
English
2. Connect the other side of stereo mini-jack cable to the line out of
audio devices.
Computer or
CD Player
Sound Control
Audio performance is available by connecting the headphone to the Headphone jack
(When headphones are connected, no sound can be heard from the speakers).
Adjust the sound as below.
Volume Control
Volume control
Mute
Press the Right and Left buttons.
Press the Up or Down button after pressing the Right or Left button to
display the volume control bar.
Mute off
Press the Right or Left button.
NOTE
z <Sound> menu of the ScreenManager also controls the sound.
16 2. CABLE CONNECTION
Download from Www.Somanuals.com. All Manuals Search And Download.
English
3. SCREENMANAGER
3-1. How to use the ScreenManager
ScreenManager allows you to adjust screen performance though the main menu and
select a FineContrast mode easily.
Control Buttons
Left, Down, Up,
Right
[Ex.] Custom
Main Menu
FineContrast
Menu
FineContrast
Button
Auto Adjustment
Button
Enter Button
NOTE
z Main Menu and FineContrast Menu cannot be activated at the same time.
1. Entering the ScreenManager
Push the Enter button once to display the main menu of the ScreenManager.
2. Making Adjustments and Settings
(1) Select the desired sub menu icon using the Control buttons and push the
Enter button. The sub menu appears.
(2) Use the Control buttons to select the desired setting icon and push the
Enter button. The setting menu appears.
(3) Use the Control buttons to make all required adjustments and push the
Enter button to save the settings.
3. Exiting the ScreenManager
(1) To return to the main menu, select the <Return> icon or push the Down
button twice, followed by the Enter button.
(2) To exit the ScreenManager, select <Exit> icon or push the Down button
twice, followed by the Enter button.
NOTE
z Double clicking the Enter button at any time also exits the ScreenManager
menu.
FineContrast Menu
Directly pressing the FineContrast button allows you to select the best
suited mode for screen display from 5 FineContrast modes; Custom,
sRGB, Text, Picture and Movie. To exit the menu, push the Enter
button. (p. 19)
3. SCREENMANAGER 17
Download from Www.Somanuals.com. All Manuals Search And Download.
English
3-2. ScreenManager Adjustments and Settings
The following table shows all the ScreenManager’s adjustment and setting menus.
“*” indicates adjustments of analog input only and “**” indicates digital input only.
Main menu
Screen
Sub menu
Reference
Clock
*
*
*
*
Phase
Position
Range Adjustment
Smoothing
Brightness
Temperature
Gamma
Color
Saturation
Hue
Gain
Reset
Sound
Volume
Control the sound volume.
Mute the sound.
Mute
PowerManager DVI DMPM
VESA DPMS
*
Sound
Others
Input Signal
Set the input signal selection of
automatic or manual. (p. 21)
Off Timer
Set the monitor’s off timer. (p. 20)
VGA Selection
Menu Position
Translucent
Menu Off Timer
Reset
*
Select the display mode. (p. 31)
Adjust the menu position.
Set the transparency of the menu.
Return to the factory default settings. (p. 35)
Information
Language
Information
Review the ScreenManager’s settings,
model name, serial number and usage
time* .
English, German, French,
Spanish, Italian, Swedish
and Japanese
Select the ScreenManager’s language.
*1 The adjustable functions on the <Color> menu depend on the selected FineContrast mode.
The above table shows the sub menus when the “Custom” mode is selected (see page 25).
*2 The displaying time of the FineContrast Menu cannot be changed.
*3 Due to the inspection on the factory, the usage time may not “0 hour” at shipping.
18 3. SCREENMANAGER
Download from Www.Somanuals.com. All Manuals Search And Download.
English
3-3. FineContrast
This function allows you to select the best suited mode for screen display.
To select the Mode
Directly pressing the FineContrast button allows you to select the best suited mode for
screen display from 5 FineContrast modes; Custom, sRGB, Text, Picture and Movie.
Exit
Push the Enter button to exit the menu. Leaving the FineContrast button untouched
more than 5 seconds also exits the menu.
FineContrast Mode
Selectable FineContrast modes are as follows.
Custom
sRGB
To adjust the color settings according to your preference
To display the screen images based on those original colors (ex. over the
Internet)
Text
Text on word processor or spreadsheet software
Photo or picture image
Picture
Movie
Animated images
Color Adjustment of the Mode Settings
The color settings of each mode can be adjusted by using the <Color> menu of the
3. SCREENMANAGER 19
Download from Www.Somanuals.com. All Manuals Search And Download.
English
3-4. Useful Functions
Adjustment Lock
Use the “Adjustment Lock” function to prevent any accidental changes.
Locked function
z
z
Settings in the ScreenManager
Auto adjustment button adjustments
Unlocked function
z
z
z
z
z
Power button
Selecting of the FineContrast mode by the FineContrast button
Brightness adjustment by Control buttons
Sound control by the Control buttons
Input signal selection button
[To lock]
Switch off the monitor’s power by the Power button. Press on the Auto adjustment
button while switching on the monitor’s power.
[To unlock]
Switch off the monitor’s power by the Power button, then hold down the Auto
adjustment button once again and turn the power back on.
Off Timer
The off timer function causes the monitor to automatically enter a power off state
after a predetermined amount of time has lapsed. This function was created to reduce
afterimage characteristics that are particular to LCD monitors when the monitor
screen is left on for a long period without use.
[Procedure]
(1) Select <Off Timer> in the ScreenManager <Others> menu.
(2) Select “Enable” and press the Right and Left buttons to adjust the “On Period”
(1 to 23 hours).
[Off Timer System]
PC
Monitor
Power Indicator
On Period (1H - 23H)
Last 15 min. in “On period”
“On period” expired
Operation
Blue
Advance Notice *
Power Off
Blue Flashing
Off
*1 Advance notice (Power Indicator flashing blue) will be given 15 minutes before the monitor
automatically enters the “Power Off” mode. To delay entering the “Power Off” mode,
press the power button during the advance notice period. The monitor will continue to
operate for an additional 90 minutes.
20 3. SCREENMANAGER
Download from Www.Somanuals.com. All Manuals Search And Download.
English
[Power Resumption Procedure]
Press the Power button.
NOTE
z The off timer function works while the PowerManager is active, but there is no
advance notice before the monitor’s power is switched off.
EIZO Logo Disappearing Function
When switching on the power button on the front panel, the EIZO logo is displyed
for a while. If you desire to display or undisplay this logo, use this function. (Default
is logo appearing.)
[To undisplay]
Switch off the monitor’s power by the power button, then hold down the Enter
button once again and turn the power back on.
[To display]
Switch off the monitor’s power by the power button, then hold down the Enter
button once again and turn the power back on.
Automatically Selecting the Input Signal Function
The monitor will automatically detect the inputted signal of either the connection for
display.
Connecting Two PCs to the Monitor
When the one computer is switched off or entering the power saving mode, the
monitor will automatically display the other signal.
Use the ScreenManager to switch the input selection to manual.
[Procedure]
(1) Select <Input Signal> in the <Others> menu.
(2) Select <Manual>.
3. SCREENMANAGER 21
Download from Www.Somanuals.com. All Manuals Search And Download.
English
4. ADJUSTMENT
The monitor displays the digital input image correctly based on its
pre-setting data.
4-1. Screen Adjustment
Screen adjustments for the LCD monitor should be used in suppressing screen
flickering and also for adjusting the screen to its proper position. There is only one
correct position for each display mode. It is also recommended to use the
ScreenManager function when first installing the display or whenever changing the
system. For convenience, an easy set-up Program installed on the utility disk to assist
in the set-up procedure is provided.
NOTE
z Allow the LCD monitor to stabilize for at least 20 minutes before making image
adjustments.
Adjustment Procedure
1. Push the Auto adjustment button on the front panel.
The message “Your setting will be lost, if you press again now.” appears and
remains on the screen for 5 seconds. While the message is on the screen, push
the Auto adjustment button again to automatically adjust the clock, phase,
screen position and resolution. If you do not wish to do adjust the screen, do
not push the Auto adjustment button again.
NOTE
z The Auto sizing function is intended for use on the Macintosh and on
AT-compatible PC running Windows. It may not work properly in either
of the following cases.
When running an AT-compatible PC on MS-DOS (Not windows). The
background color for the “wall paper” or “desktop” pattern is set to black.
If the appropriate screen cannot be made by using the Auto
adjustment button, adjust the screen through the following
procedures. If the appropriate screen can be made, proceed to
22 4. ADJUSTMENT
Download from Www.Somanuals.com. All Manuals Search And Download.
English
2. Run the “Screen adjustment program”.
Having read the “Readme.txt” file, run the “Screen adjustment program” in the
enclosed EIZO LCD Utility Disk. Step by step, adjustment is provided by the
wizard guide. (If using the Windows, the program can be directly run from the
menu screen of the CD-ROM.)
NOTE
z If the user’s operating system has no utility disk (e.g. OS/2), we
recommend setting the desktop pattern to that as shown in the diagram on
the following.
3. Adjust by using <Screen> menu in the ScreenManager.
(1) Vertical bars appear on the screen
→
Select the <Clock> and eliminate the vertical bars by using the Right and
Left of the Control buttons.
Do not continuously press the Control buttons, as the adjustment value
will change quickly and make it difficult to locate the most suitable
adjustment point. If the horizontal flickering, blur or bars appear, proceed
to <Phase> adjustment as follows.
4. ADJUSTMENT 23
Download from Www.Somanuals.com. All Manuals Search And Download.
English
(2) Horizontal bars appear on the screen.
→
Select the <Phase> and eliminate the horizontal flickering, blurring or
bars by using the Right and Left buttons.
NOTE
z Horizontal bars may not completely disappear from the screen
depending on the PC.
(3) The screen position is incorrect.
→
Use the <Position> adjustment.
The correct displayed position of the monitor is decided because the
number and the position of the pixels are fixed. The <Position>
adjustment moves the image to the correct position.
Select <Position> and adjust the position by using the Up, Down, Right
and Left buttons.
If vertical bars of distortion appear after finishing the <Position>
adjustment, return to <Clock> adjustment and repeat the previously
explained adjustment procedure. Clock →Phase →Position.
4. Adjust the output signal range (Dynamic Range) of the signal.
→
This controls the level of output signal range to display the whole color
gradation (256 colors).
[Procedure]
Push the Auto adjustment button on the front panel while displaying the
<Range Adjustment> menu to automatically adjust the range. The screen blanks
for a moment and adjusts the color range to display the whole color gradation
of the current output signal.
24 4. ADJUSTMENT
Download from Www.Somanuals.com. All Manuals Search And Download.
English
5. To smooth the blurred texts of the enlarged screen of the lower
resolutions.
→
Switch the <Smoothing> setting.
Select the suitable level from 1 - 5 (Soft - Sharp).
Select <Smoothing> in the <Screen> menu and adjust by using the Right and
Left buttons.
NOTE
z The <Smoothing> is disabled in the resolution 1280 × 1024.
z Since the displayed image is enlarged, the blurred texts may not be
necessarily lost completely.
4-2. Color Adjustment
Color settings of each FineContrast mode can be adjusted and saved by using the
<Color> menu of the ScreenManager.
the color adjustments.
Adjustment Items
The adjustable items and displayed icons on the <Color> menu depend on the selected
FineContrast mode.
“√”: Settable/Adjustable “–”: Fixed at the factory
FineContrast Modes
Icons
Functions
Custom
sRGB
Text
Picture
Movie
Brightness
Temperature
Gamma
Saturation
Hue
√
√
√
√
√
√
√
√
√
√
√
–
–
–
–
–
–
√
√
√
√
–
√
√
–
√
√
–
√
√
–
√
√
–
√
Gain
Reset
NOTE
z Allow the LCD monitor to stabilize for at least 20 minutes before making image
adjustments.
z Performing the <Reset> of the <Color> menu returns the color settings of the
selected mode to the default settings.
4. ADJUSTMENT 25
Download from Www.Somanuals.com. All Manuals Search And Download.
English
0
Menu
Function Descriptions
Adjustable range
Brightness
To set the brightness of the
screen
0 ~ 100%
NOTE
z
Directly pressing the up or down buttons also can adjust the brightness.
4,000 ~ 10,000 K
in 500 K increments (including 9,300 K).
Default setting is off (normal white)
0
NOTE
z
z
The values shown in the Kelvin are available only as a reference tool.
Setting the temperature under 4,000 K or over 10,000 K invalidates the
color temperature setting. (The color temperature’s setting turns “OFF”.)
To set the gamma value
1.8 ~ 2.6 (in 0.2 increments)
NOTE
z
If setting the gamma value, the using the monitor in the digital signal
input is recommended.
Saturation
To change the saturation
-128 ~ 127
Setting the minimum level (-128) turns the
image to the monochrome.
NOTE
z
The <Saturation> adjustment may cause undisplayable color tone.
Hue
To change the flesh color, etc. -32 ~ 32
NOTE
z
The <Hue> adjustment may cause undisplayable color tone.
Gain
To change each color
(red, green and blue)
0 ~ 100%
By adjusting the red, green and blue color
tones for each mode, custom colors can be
defined. Display a white or gray background
image and adjust the <Gain>.
NOTE
z
The values shown in the percentage are available only as a reference
tool.
z
<Gain> setting returns to the default setting.
Reset
To return the color settings of Select the <Reset>.
the selected mode to the
default settings
26 4. ADJUSTMENT
Download from Www.Somanuals.com. All Manuals Search And Download.
English
4-3. Power-save Setup
The <PowerManager> menu in the ScreenManager enables to set the power-save
setup.
NOTE
z Do your part to conserve energy, turn off the monitor when you are finished using
it. Disconnecting the monitor from the power supply is recommended to save
energy completely.
Analog Input
This monitor complies with the “VESA DPMS (Video Electronics Standards
[Procedure]
(1) Set the PC’s power saving settings.
(2) Select “VESA DPMS” from the <PowerManager> menu.
[Operation]
PC
Monitor
Power Indicator
Operation
Operation
Blue
STAND-BY
SUSPEND OFF
Power saving
Power saving
Yellow
[Power Resumption Procedure]
Operate the mouse or keyboard to return to a normal screen.
Digital Input
[Procedure]
(1) Set the PC’s power saving settings.
(2) Select “DVI DMPM” from the <PowerManager> menu.
[Power Saving System]
PC
Monitor
Operation
Power Indicator
Blue
Operation
Power saving
Power saving
Yellow
[Power Resumption Procedure]
Operate the mouse or keyboard to return to a normal screen from the Power save
mode of the PC.
4. ADJUSTMENT 27
Download from Www.Somanuals.com. All Manuals Search And Download.
English
Power-save for Speaker
When the monitor is in the power-saving mode, sound of speaker also erases
simultaneously can be performed.
[Procedure]
(1) Set the PC’s power saving settings.
(2) Select <Sound>.
(3) Select “Disable”. (“Enable” is selected to leave sound.)
28 4. ADJUSTMENT
Download from Www.Somanuals.com. All Manuals Search And Download.
English
5. ATTACHING AN ARM STAND
The LCD monitor can be used with an arm stand by removing the tilt stand and
attaching the arm stand to the LCD monitor.
Using our optional arm or stand is recommended. (Ask your local dealer for
information.)
NOTE
z If you will use the arm or stand of other companies, confirm the followings to the
arm or stand maker before selecting.
– Hole spacing on the arm mounting: 100 mm × 100 mm (VESA compliant)
– Supportable Weight: Total weight of the monitor (without stand) and attaching
equipment such as a cable
– TÜV/GS approved arm or stand
z Please connect cables after attaching an arm stand.
Setup Procedure
1. Lay the LCD monitor down. Do not scratch the panel.
2. Remove the tilt stand by loosening the screws
(2 pcs of M4 × 10 mm).
3. Attach an arm stand to the LCD monitor securely.
Arm-Stand
4 Mounting Screws (enclosed): M4 × 12 mm
5. ATTACHING AN ARM STAND 29
Download from Www.Somanuals.com. All Manuals Search And Download.
English
6. TROUBLESHOOTING
If a problem persists even after applying the suggested remedies, contact an EIZO dealer.
z No picture problems : See No.1 ~ No.2
z Imaging problems : See No.3 ~ No.11
z Other problems : See No.12 ~ No.14
Problems
1. No picture
Points to check with Possible Solutions
z
Indicator status: Off
†
Check that the power cord is correctly
connected. If the problem persists, turn off the
monitor power for a few minutes, then turn it
back on and try again.
z
z
Indicator status: Blue
Indicator status: Yellow
†
†
Check the Brightness setting.
Switch the signal Input by pressing the input
signal selection button on the front control panel.
†
the mouse. (p. 27)
2. Following messages appear.
(Error messages shown below
will remain on the screen for 40
seconds.)
These messages appear when the signal is not
inputted correctly, even if the monitor functions
properly.
†
When the image is displayed correctly after a
short time, there is no problem with the monitor.
(Some PCs do not output the signal soon after
powering on.)
†
†
†
Check that the signal cable is properly
connected to the PC or graphics board.
Switch the signal input by pressing the Input
signal selection button on the front control panel.
z
Whenever an error signal
message appears, the
signal frequency will be
displayed in red.
Use the graphics board’s utility software to
change the frequency setting. (Refer to the
manual of the graphics board.)
(Example)
30 6. TROUBLESHOOTING
Download from Www.Somanuals.com. All Manuals Search And Download.
English
Problems
Points to check with Possible Solutions
3. Display position is incorrect.
†
†
Adjust the image position using the <Position>
The two display modes, VGA 720 × 400
(70 Hz) and 320 × 200 (70 Hz), have the same
signal timings. Using this adjustment selects
the appropriate display mode. (This function
effects only when the resolution is VGA
720 × 400 (70 Hz) or 320 × 200 (70 Hz).
†
†
If the problem persists, use the graphics
board’s utility software to change the display
position if available.
4. Vertical bars of distortion appear.
Decrease the vertical bars using the
<Clock> (p. 23).
5. Horizontal bars of distortion
appear.
†
Decrease the horizontal bars using the
6. Letters and lines appear blurred.
†
†
7. The screen is too bright or too
dark.
Adjust the <Brightness> (The backlight of the
LCD monitor has a fixed life span. When the
screen becomes dark or begins to flicker,
please consult your dealer.)
8. Afterimages appear.
†
†
Do you use the screen saver or timer (p. 20)
when displaying the same image for extended
periods of time?
Afterimages are particular to LCD monitors.
Avoid displaying the same image for extended
periods of time.
9. The screen has defective pixels
(e.g. slightly light or dark).
†
†
†
This is due to the characteristics of the panel
itself, and not the LCD product.
10. Fingerprints remain on the
screen.
Leaving the screen white may solve the
problem.
11. The <Smoothing> cannot be
selected.
<Smoothing> is disabled when the screen is
displayed in the 1280 × 1024.
6. TROUBLESHOOTING 31
Download from Www.Somanuals.com. All Manuals Search And Download.
English
Problems
Points to check with Possible Solutions
12. The ScreenManager cannot be
activated.
†
The adjustment lock is probably on.
Then, while pressing the Auto adjustment
button switch, the power on.
13. The Auto adjustment button
does not operate.
†
†
The Auto adjustment button does not operate
when the digital signal is inputted.
The adjustment lock is probably on.
while pressing the Auto adjustment button,
switch the monitor on.
†
The Auto sizing function is intended for use on
the Macintosh and on AT-compatible PC
running Windows. It may not work properly in
either of the following cases.
– When running an AT-compatible PC on
MS-DOS (Not windows).
– The background color for the “wall paper” or
“desktop” pattern is set to black.
– Some signals from a graphics board may not
function properly.
14. No Sound
†
Check that the stereo mini jack cable is
properly connected.
†
†
†
Check that the <Volume> is not “0” setting.
Check that the <Mute> is not “On” setting.
Check that the settings on PC or software that
playing the sound.
32 6. TROUBLESHOOTING
Download from Www.Somanuals.com. All Manuals Search And Download.
English
7. CLEANING
Periodic cleaning is recommended to keep the monitor looking new and to prolong its
operation lifetime.
NOTE
z Never use thinner, benzene, alcohol (ethanol, methanol, or isopropyl alcohol),
abrasive cleaners, or other strong solvents, as these may cause damage to the
cabinet or LCD panel.
Cabinet
To remove stains, wipe the cabinet with a soft, lightly moistened cloth using a mild
detergent. Do not spray wax or cleaner directly into the cabinet. (For details, refer to
the manual of the PC.)
LCD Panel
z The LCD surface can be cleaned with a soft cloth, such as cotton or lens paper.
z If necessary, stubborn stains can be removed by moistening part of a cloth with
water to enhance its cleaning power.
7. CLEANING 33
Download from Www.Somanuals.com. All Manuals Search And Download.
English
8. SPECIFICATIONS
LCD Panel
43 cm (17.0 inch), TFT color LCD panel with Anti-Glare
Hard Coating
Viewing Angle: H: 170°, V: 155° (CR≥ 5)
Dot Pitch
0.264 mm
Horizontal Scan Frequency
Analog: 24.8 ~ 80 kHz (Automatic)
Digital: 31~ 64 kHz
Vertical Scan Frequency
Analog: 50 ~ 75.1 Hz (Automatic)
Digital: 59 ~ 61Hz, (VGA Text : 69 ~ 71 Hz)
Resolution
1280 dots × 1024 lines
Dot Clock (max.)
Display Colors
Display Area
Analog: 135 MHz, Digital: 108 MHz
16 million colors (max.)
337.9 mm (H) × 270.3 mm (V) (13.3” (H) × 10.6” (V))
(Viewable image size: 432 mm (17.0”))
Power Supply
100-120VAC 10% 50/60 Hz, 0.7 A
200-240 VAC 10%, 50 Hz, 0.45 A
Power Consumption
Max.: 45 W(With speaker)
40 W(Without speaker)
Power Saving Mode: Less than 2 W (For single signal
input)
Input Connector
D-Sub mini 15 pin, DVI-D
Separate, TTL, Positive/Negative
0.7Vp-p/75 ohms, Positive
TMDS (Single Link)
Analog Input Signal (Sync)
Analog Input Signal (Video)
Input Signal (Digital)
Signal registration
Plug & Play
Analog: 45 (Factory preset: 20)
VESA DDC 2B
Amplifier Output (max.)
Line input
1 W + 1 W
Input impedance 47 kohms (typ.)
Input sensitivity: 500 mV
Headphone output level
Dimensions
6 mW + 6 mW at Amplifier output
1 W + 1 W
368 mm (W) × 375 ~ 425 mm (H) × 198 mm (D)
(14.5”(W) × 14.8” ~ 16.7”(H) × 7.8”(D))
Dimensions (without stand)
368 mm (W) × 343 mm (H) × 52 mm (D)
(14.5”(W) × 13.5”(H) × 2.0”(D))
Weight
5.5 kg (12.1 lbs.)
4.1 kg (9.0 lbs.)
Weight (without stand)
34 8. SPECIFICATIONS
Download from Www.Somanuals.com. All Manuals Search And Download.
English
Temperature
Operating: 0°C ~ 35°C (32°F ~ 95°F)
Storage: -20°C ~ 60°C (-4°F ~ 140°F)
Humidity 30% to 80% R.H. Non-condensing
Certifications and Standards
100-120 VAC
STAR Program, TÜV/Rheinland Ergonomics Approved
Certifications and Standards
200-240 VAC
ENERGY STAR Program, TÜV/Rheinland Ergonomics
Approved
*1 Applicable to gray color version only.
*2 Applicable to black color version only.
„ Default settings
Analog input
Digital input
100%
Brightness
100%
Smoothing
3
FineContrast Mode
PowerManager
Input Signal
Off Timer
Custom
VESA DPMS
DVI DMPM
Auto
Disable
English
Language
„ Dimensions
Unit mm (inches)
5°
52(2)
368 (1 4.5)
29(1.1 4)
2(0.08)
33 9.8 (1 3.4)
20.5(0.8)
62 ( 2.4)
180 (7.1)
198(7.8)
8. SPECIFICATIONS 35
Download from Www.Somanuals.com. All Manuals Search And Download.
English
„ Pin Assignment
D-Sub mini 15 pin connector
5
4
3
2
1
10
9
8
7
6
11
14 13 12
15
Pin
No.
Pin
No.
Pin
No.
Signal
Signal
Signal
1
2
3
4
5
Red video
Green video
Blue video
Ground
6
7
Red ground
Green ground
Blue ground
No pin
11
12
13
14
15
Ground Shorted
Data (SDA)
H. Sync
8
9
V. Sync
No pin
10
Ground Shorted
Clock (SCL)
DVI-D Connector
3
1
9
17
2
4
12
20
6
7
8
5
13
21
10 11
19
14 15 16
24
22 23
18
Pin
No.
Pin
No.
Pin
No.
Signal
Signal
Signal
1
2
TMDS Data 2-
TMDS Data 2+
9
TMDS Data 1-
TMDS Data 1+
17
18
TMDS Data 0-
TMDS Data 0+
10
TMDS Data
2/4 Shield
TMDS Data
1/3 Shield
TMDS Data
0/5 Shield
3
11
19
4
5
6
7
8
NC*
NC*
12
13
14
15
16
NC*
NC*
20
21
22
23
24
NC*
NC*
DDC Clock (SCL)
DDC Data (SDA)
NC
+5V Power
Ground (For +5V)
Hot Plug Detect
TMDS Clock Shield
TMDS Clock+
TMDS Clock-
(*NC: No Connection)
36 8. SPECIFICATIONS
Download from Www.Somanuals.com. All Manuals Search And Download.
English
9. GLOSSARY
Clock
With the analog input signal display, the analog signal is converted to a digital
signal by the LCD circuitry. To convert the signal correctly, the LCD monitor needs
to produce the same number clock pulse as the dot clock of the graphics system.
When the clock pulse is not correctly set, some vertical bars of distortion are
displayed on the screen.
Color Temperature (Temperature)
Color Temperature is a method to measure the white color tone, generally
indicated in degrees Kelvin. At high temperatures the white tone appears
somewhat blue, while at lower temperatures it appears somewhat red. Computer
monitors generally give best performance at high temperature settings.
5,000 K: Slightly reddish white.
6,500 K: Warm-white tone, similar to white paper or daylight.
9,300 K: Slightly bluish white.
DVI (Digital Visual Interface)
A digital flat panel interface. DVI can transmit digital data from the PC directly
without loss with the signal transition method “TMDS”.
There are two kinds of DVI connectors. One is DVI-D connector for digital signal
input only. The other is DVI-I connector for both digital and analog signal inputs.
DVI DMPM (DVI Digital Monitor Power Management)
The Power management system for the digital interface. The “Monitor ON” status
(operation mode) and the “Active Off” status (power-saving mode) are
indispensable for the DVI-DMPM as the monitor’s power mode.
Gain Adjustment
Adjusts each color parameter for red, green and blue. The color of the LCD
monitor is displayed through the color filter of the LCD panel. Red, green and blue
are the three primary colors. The colors on the monitor are displayed by
combining these three colors. The color tone can change by adjusting the
illumination amount passed through each color’s filter.
Gamma
Generally, the relationship that the light intensity values of a monitor change
nonlinearly to the input signal level is called “Gamma Characteristic”. On the
monitor, low gamma values display the whitish images and high gamma values
display the high contrast images.
9. GLOSSARY 37
Download from Www.Somanuals.com. All Manuals Search And Download.
English
Phase
The phase adjustment decides the sampling timing point for converting the analog
input signal to a digital signal. Adjusting the phase after the clock adjustment will
produce a clear screen.
Range Adjustment
The Range Adjustment controls the level of output signal range to display the
whole color gradation.
Resolution
The LCD panel consists of a fixed number of pixel elements which are illuminated
to form the screen image. This product displays panel consists of 1280 horizontal
pixels and 1024 vertical pixels. At a resolution of 1280 × 1024, all pixels are
displayed as a full screen.
sRGB (Standard RGB)
“International Standard for Red, Green, and Blue color space” A color space was
defined with the aim of the color matching between applications and hardware
devices, such as monitors, scanners, printers and digital cameras. As a standard
default space, sRGB allows Internet users to closely match colors.
TMDS (Transition Minimized Differential Signaling)
A signal transition method for the digital interface.
VESA DPMS
(Video Electronics Standards Association - Display Power Management
Signaling)
The acronym VESA stands for “Video Electronics Standards Association”, and
DPMS stands for “Display Power Management Signaling”. DPMS is a
communication standard that PCs and graphics boards use to implement power
savings on the monitor side.
38 9. GLOSSARY
Download from Www.Somanuals.com. All Manuals Search And Download.
APPENDIX/ANHANG/ANNEXE
Preset Timing Chart for Analog input
Timing-Übersichten für Analog Eingang
Synchronisation des Signaux pour Analog numerique
Based on the signal diagram shown below 20 factory presets have been registered in
the monitor’s microprocessor.
Der integrierte Mikroprozessor des Monitors unterstützt 20 werkseitige
Standardeinstellungen (siehe hierzu die nachfolgenden Diagramme).
20 signaux ont été enregistrés en usine dans le microprocesseur du moniteur,
conformément au diagramme de synchronisation ci-dessous.
Dot Clock
MHz
Sync Polarity
Frequencies
fH: kHz
Mode
H
V
fV: Hz
70.1
60.0
70.1
66.7
74.6
75.1
74.8
72.8
75.0
56.3
60.3
72.2
75.0
60.0
70.1
75.0
75.0
60.0
60.0
75.0
VGA Graphic 320×200 25.2 MHz
Nega.
Nega.
Nega.
Nega.
Posi.
Posi.
Nega.
Posi.
Nega.
Posi.
Nega.
Posi.
Nega.
Nega.
Posi.
Posi.
Posi.
Posi.
Nega.
Nega.
Posi.
Posi.
Posi.
Posi.
Posi.
31.5
31.5
31.5
35.0
49.7
68.7
74.8
37.9
37.5
35.2
37.9
48.1
46.9
48.4
56.5
60.0
67.5
60.0
64.0
80.0
VGA 640×480
25.2 MHz
28.3 MHz
30.2 MHz
57.3 MHz
100.0 MHz
126.2 MHz
31.5 MHz
31.5 MHz
36.0 MHz
40.0 MHz
50.0 MHz
49.5 MHz
65.0 MHz
75.0 MHz
78.8 MHz
108.0 MHz
108.0 MHz
108.0 MHz
135.0 MHz
VGA Text 720×400
Macintosh 640×480
Macintosh 832×624
Macintosh 1152×870
Macintosh 1280×960
VESA 640×480
Nega.
Posi.
Nega.
Nega.
Posi.
VESA 640×480
VESA 800×600
VESA 800×600
Posi.
VESA 800×600
Posi.
VESA 800×600
Posi.
VESA 1024×768
VESA 1024×768
VESA 1024×768
VESA 1152×864
VESA 1280×960
VESA 1280×1024
VESA 1280×1024
Nega.
Nega.
Posi.
Posi.
Posi.
Posi.
Posi.
APPENDIX/ANHANG/ANNEXE i
Download from Www.Somanuals.com. All Manuals Search And Download.
[Applicable to gray cabinet.]
Congratulations!
The display you have just purchased carries the TCO’03 Displays
label. This means that your display is designed, manufactured and
tested according to some of the strictest quality and environmental
requirements in the world. This makes for a high performance
product, designed with the user in focus that also minimizes the
Impact on our natural environment.
Some of the features of the TCO’03 Display requirements:
Ergonomics
z Good visual ergonomics and image quality in order to improve the working
environment for the user and to reduce sight and strain problems. Important
parameters are luminance, contrast, resolution, reflectance, colour rendition and
image stability.
Energy
z Energy-saving mode after a certain time - beneficial both for the user and environment
z Electrical safety
Emissions
z Electromagnetic fields
z Noise emissions
Ecology
z The products must be prepared for recycling and the manufacturer must have a
certified environmental management system such as EMAS or ISO 14000
z Restrictions on
chlorinated and brominated flame retardants and polymers
heavy metals such as cadmium, mercury and lead.
The requirements includes in this label have been developed by TCO Development in
co-operation with scientists, experts, users as well as manufacturers all over the world. Since the
end of the 1980s TCO has been involved in influencing the development of IT equipment in a
more user-friendly direction. Our labeling system with displays in 1992 and is now requested by
users and IT-manufacturers all over the world.
For more information, please visit
Download from Www.Somanuals.com. All Manuals Search And Download.
[Applicable to black cabinet.]
Congratulations!
You have just purchased a TCO’99 approved and labelled
product! Your choice has provided you with a product developed
for professional use. Your purchase has also contributed to
reducing the burden on the environment and also to the further
development of environmentally adapted electronics products.
Why do we have environmentally labelled computers?
In many countries, environmental labelling has become an established method for encouraging
the adaptation of goods and services to the environment. The main problem, as far as
computers and other electronics equipment are concerned, is that environmentally harmful
substances are used both in the products and during their manufacture. Since it is not so far
possible to satisfactorily recycle the majority of electronics equipment, most of these potentially
damaging substances sooner or later enter nature.
There are also other characteristics of a computer, such as energy consumption levels, that are
important from the viewpoints of both the work (internal) and natural (external) environments.
Since all methods of electricity generation have a negative effect on the environment (e.g. acidic
and climate-influencing emissions, radioactive waste), it is vital to save energy. Electronics
equipment in offices is often left running continuously and thereby consumes a lot of energy.
What does labelling involve?
This product meets the requirements for the TCO’99 scheme which provides for international
and environmental labelling of personal computers. The labelling scheme was developed as a
joint effort by the TCO (The Swedish Confederation of Professional Employees), Svenska
Naturskyddsforeningen (The Swedish Society for Nature Conservation) and Statens
Energimyndighet (The Swedish National Energy Administration).
Approval requirements cover a wide range of issues: environment, ergonomics, usability,
emission of electric and magnetic fields, energy consumption and electrical and fire safety.
The environmental demands impose restrictions on the presence and use of heavy metals,
brominated and chlorinated flame retardants, CFCs (freons) and chlorinated solvents, among
other things. The product must be prepared for recycling and the manufacturer is obliged to
have an environmental policy which must be adhered to in each country where the company
implements its operational policy.
The energy requirements include a demand that the computer and/or display, after a certain
period of inactivity, shall reduce its power consumption to a lower level in one or more stages.
The length of time to reactivate the computer shall be reasonable for the user.
Labelled products must meet strict environmental demands, for example, in respect of the
reduction of electric and magnetic fields, physical and visual ergonomics and good usability.
You will find a brief summary of the environmental requirements met by this product on the
right. The complete environmental criteria document may be ordered from:
TCO Development
SE-114 94 Stockholm, Sweden
Fax: +46 8 782 92 07
Email (Internet): [email protected]
Current information regarding TCO’99 approved and labelled products may also be
Download from Www.Somanuals.com. All Manuals Search And Download.
Environmental Requirements
Flame retardants
Flame retardants are present in printed circuit boards, cables, wires, casings and housings.
Their purpose is to prevent, or at least to delay the spread of fire. Up to 30% of the plastic in
a computer casing can consist of flame retardant substances. Most flame retardants contain
bromine or chloride, and those flame retardants are chemically related to another group of
environmental toxins, PCBs. Both the flame retardants containing bromine or chloride and
the PCBs are suspected of giving rise to severe health effects, including reproductive damage
in fish-eating birds and mammals, due to the bio-accumulative* processes. Flame retardants
have been found in human blood and researchers fear that disturbances in foetus
development may occur.
The relevant TCO’99 demand requires that plastic components weighing more than 25
grams must not contain flame retardants with organically bound bromine or chlorine. Flame
retardants are allowed in the printed circuit boards since no substitutes are available.
Cadmium**
Cadmium is present in rechargeable batteries and in the colour-generating layers of certain
computer displays. Cadmium damages the nervous system and is toxic in high doses.
The relevant TCO’99 requirement states that batteries, the colour-generating layers of
display screens and the electrical or electronics components must not contain any cadmium.
Mercury**
Mercury is sometimes found in batteries, relays and switches. It damages the nervous system
and is toxic in high doses.
The relevant TCO’99 requirement states that batteries may not contain any mercury. It also
demands that mercury is not present in any of the electrical or electronics components
associated with the labelled unit.
CFCs (freons)
The relevant TCO’99 requirement states that neither CFCs nor HCFCs may be used during
the manufacture and assembly of the product. CFCs (freons) are sometimes used for washing
printed circuit boards. CFCs break down ozone and thereby damage the ozone layer in the
stratosphere, causing increased reception on earth of ultraviolet light with e.g. increased risks
of skin cancer (malignant melanoma) as a consequence.
Lead**
Lead can be found in picture tubes, display screens, solders and capacitors. Lead damages
the nervous system and in higher doses, causes lead poisoning.
The relevant TCO’99 requirement permits the inclusion of lead since no replacement has yet
been developed.
* Bio-accumulative is defined as substances which accumulate within living organisms.
** Lead, Cadmium and Mercury are haevy metals which are Bio-accumulative.
Download from Www.Somanuals.com. All Manuals Search And Download.
For U.S.A, Canada, etc. (rated 100-120 Vac) Only
FCC Declaration of Conformity
We, the Responsible Party
EIZO NANAO TECHNOLOGIES INC.
5710 Warland Drive, Cypress, CA 90630
Phone: (562) 431-5011
declare that the product
Trade name: EIZO
Model: FlexScan M1700
is in conformity with Part 15 of the FCC Rules. Operation of this product is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures.
* Reorient or relocate the receiving antenna.
* Increase the separation between the equipment and receiver.
* Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
* Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
Note
Use the attached specified cable below or EIZO signal cable with this monitor so as to keep
interference within the limits of a Class B digital device.
- AC Cord
- Shielded Signal Cable (D-SUB mini 15 pin - D-SUB mini 15 pin, the enclesed signal cable)
- Stereo mini-jack cable
Canadian Notice
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de le classe B est comforme à la norme NMB-003 du Canada.
Download from Www.Somanuals.com. All Manuals Search And Download.
Hinweis zur Ergonomie :
Dieser Monitor erfüllt die Anforderungen an die Ergonomie nach EK1-ITB 2000 mit dem
Videosignal, 1280 Punkte × 1024 Zeilen, RGB analog, 0,7 Vp-p und mindestens 75,0 Hz
Bildwiederholfrequenz, non interlaced. Weiterhin wird aus ergonomischen Gründen
empfohlen, die Grundfarbe Blau nicht auf dunklem Untergrund zu verwenden (schlechte
Erkennbarkeit, Augenbelastung bei zu geringem Zeichenkontrast.)
Hinweise zur Auswahl des richtigen Schwenkarms für Ihren Monitor
Dieser Monitor ist für Bildschirmarbeitsplätze vorgesehen. Wenn nicht der zum
Standardzubehör gehörige Schwenkarm verwendet wird, muss statt dessen ein geeigneter
anderer Schwenkarm installiert werden. Bei der Auswahl des Schwenkarms sind die
nachstehenden Hinweise zu berücksichtigen:
Der Standfuß muß den nachfolgenden Anforderungen entsprechen:
a) Der Standfuß muß eine ausreichende mechanische Stabilität zur Aufnahme des
Gewichtes vom Bildschirmgerät und des spezifizierten Zubehörs besitzen. Das Gewicht
des Bildschirmgerätes und des Zubehörs sind in der zugehörenden Bedienungsanleitung
angegeben.
b) Die Befestigung des Standfusses muß derart erfolgen, daß die oberste Zeile der
Bildschirmanzeige nicht höher als die Augenhöhe eines Benutzers in sitzender Position
ist.
c) Im Fall eines stehenden Benutzers muß die Befestigung des Bildschirmgerätes derart
erfolgen, daß die Höhe der Bildschirmmitte über dem Boden zwischen 135 – 150 cm
beträgt.
d) Der Standfuß muß die Möglichkeit zur Neigung des Bildschirmgerätes besitzen (max.
vorwärts: 5°, min. nach hinten ≥ 5°).
e) Der Standfuß muß die Möglichkeit zur Drehung des Bildschirmgerätes besitzen (max.
180°). Der maximale Kraftaufwand dafür muß weniger als 100 N betragen.
f) Der Standfuß muß in der Stellung verharren, in die er manuell bewegt wurde.
g) Der Glanzgrad des Standfusses muß weniger als 20 Glanzeinheiten betragen
(seidenmatt).
h) Der Standfuß mit Bildschirmgerät muß bei einer Neigung von bis zu 10° aus der
normalen aufrechten Position kippsicher sein.
"Maschinenlarminformations-Verordnung 3. GPSGV: Der hochste Schalldruckpegel betragy
70 dB(A) oder weniger demass EN ISO 7779"
Download from Www.Somanuals.com. All Manuals Search And Download.
Recycle Auskunft
Die Rücknahme dieses Produktes nach Nutzungsende übernimmt EIZO in Deutschland
zusammen mit dem Partner eds-r gmbh rucknahmesysteme. Dort werden die Geräte in ihre
Bestandteile zerlegt, die dann der Wiederverwertung zugeführt werden. Um einen
Abholtermin zu vereinbaren und die aktuellen Kosten zu erfahren, benutzen Sie bitte
folgende Rufnummer: 02153-73 35 00. Weitere Informationen finden Sie auch unter der
Recycling Information for customers in Switzerland:
All recycling information is placed in the SWICO’s website.
Recycling-Information für Kunden in der Schweiz:
Alle Informationen zum Thema Recycling finden Sie auf der Homepage des
Brancheverbandes SWICO.
Renseignements de recyclage pour les clients en Suisse:
Vous trouvez tous les renseignements pour le sujet de recyclage sur la page WEB de I’UNION
DE BRAN CHE SWICO.
Recycling Information for customers in USA:
All recycling information is placed in the EIZO Nanao Technologies, Inc’s website.
Återvinnings information för kunder i Sverige:
All information om återvinning finns på Eizo Europe AB:s hemsida:
www.eizo.se
Download from Www.Somanuals.com. All Manuals Search And Download.
|