Important
Please read PRECAUTIONS, this User’s Manual, Setup Guide and
Specifications Sheet (separate volumes) carefully to familiarize yourself with
safe and effective usage.
• Please read the Setup Guide (separate volume).
• Please read the Specifications Sheet for details on the specifications of
the monitor.
• The latest User’s Manual is available for download from our site:
Download from Www.Somanuals.com. All Manuals Search And Download.
Notice for this monitor
This product is suited to creating documents, viewing multimedia content, and other general purposes.
This product has been adjusted specifically for use in the region to which it was originally shipped. If the product is used
outside the region, it may not operate as specified in the specifications.
This product may not be covered by warranty for uses other than those described in this manual.
The specifications noted in this manual are only applicable for power cords and signal cables specified by us.
Use optional products manufactured or specified by us with this product.
As it takes about 30 minutes for the performance of electrical parts to stabilize, adjust the monitor 30 minutes or more
after the monitor power has been turned on.
In order to suppress the luminosity change by long-term use and to maintain the stable luminosity, use of a monitor in
lower brightness is recommended.
When the screen image is changed after displaying the same image for extended periods of time, an afterimage may
appear. Use the screen saver or timer to avoid displaying the same image for extended periods of time.
Periodic cleaning is recommended to keep the monitor looking new and to prolong its operation lifetime.
The LCD panel is manufactured using high-precision technology. However, missing pixels or lit pixels may appear on
the LCD panel, this is not malfunction.
Percentage of effective pixels : 99.9994% or higher.
The backlight of the LCD panel has a fixed life span. When the screen becomes dark or begins to flicker, please contact
your dealer.
Do not press on the panel or edge of the frame strongly, as this may result in the display malfunction, such as the
interference patterns, etc. If pressure is continually applied to the LCD panel, it may deteriorate or damage your LCD
panel. (If the pressure marks remain on the LCD panel, leave the monitor with a white or black screen. The symptom
may disappear.)
Do not scratch or press on the panel with any sharp objects, such as a pencil or pen as this may result in damage to the
panel. Do not attempt to brush with tissues as this may scratch the LCD panel.
When the monitor is cold and brought into a room or the room temperature goes up quickly, dew condensation
may occur inside and outside the monitor. In that case, do not turn the monitor on and wait until dew condensation
disappears, otherwise it may cause some damages to the monitor.
ꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning
Attention
• Never use any solvents or chemicals, such as thinner, benzene, wax, alcohol, and abrasive cleaner, which may damage
the cabinet or LCD panel.
NOTE
• Optional ScreenCleaner is recommended for cleaning the panel surface.
[LCD Panel]
• Clean the LCD panel with a soft cloth such as cotton cloth or lens cleaning paper.
• Remove persistent stains gently with a cloth dampened with a little water, and then clean the LCD panel again with a
dry cloth for better finishing.
[Cabinet]
Clean the cabinet with a soft cloth dampened with a little mild detergent.
To use the monitor comfortably
• An excessively dark or bright screen may affect your eyes. Adjust the brightness of the monitor according to the
environmental conditions.
• Staring at the monitor for a long time tires your eyes. Take a 10-minute rest every hour.
ꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
CONTENTS
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1 Features and Overview
Thank you very much for choosing an EIZO color LCD monitor.
1-1 Features
• 20” wide format LCD (EV2023W)/23” wide format LCD (EV2303W)
• Applicable to the resolution of 1600 × 900 (EV2023W)/Applicable to the resolution of 1920 × 1080 (EV2303W)
• Power saving function
Suppressing the power consumption* reduces the carbon dioxide emissions.
This product is equipped with various power saving functions.
–
–
Power Consumption when main power switch is Off: 0W
Equipped with main power switch.
Turning off the main power switch completely shuts off power supply to the monitor while the monitor is not used.
Auto EcoView function
The sensor on the front side of the monitor detects the environmental brightness to adjust the screen brightness automatically
and comfortably.
Excessively high brightness may lead a damage to the natural environment as well as to your eyes. Suppressing the excessively
high brightness will be helpful to reduce the power consumption and the damage to your eyes.
– EcoView Sense function
The sensor on the front side of the monitor detects the movement of a person. When a person moves away from the monitor, it
shifts to the power saving mode automatically and does not display the images on the screen. Therefore, the function reduces
the power consumption.
–
EcoView Index function
The green indicator shows the power consumption ratio responding to the brightness of the monitor. You can realize the power
consumption reduction by taking consideration in the ratio of power saving.
• FineContrast function
• Portrait/Landscape display available
• The software “ScreenManager Pro for LCD (DDC/CI)” to adjust the screen using the mouse and keyboard is included
• HDCP (High-bandwidth Digital Content Interface)
• Built-in speakers and headphone jack
* Reference values:
– EV2023W
Maximum power consumption: 38W (Luminance Max., at default settings)
Standard power consumption: 24W (Luminance 120cd/m2, at default settings)
– EV2303W
Maximum power consumption: 31W (Luminance Max., at default settings)
Standard power consumption: 17W (Luminance 120cd/m2, at default settings)
NOTE
• This monitor supports the Portrait/Landscape display. This function allows you to change the orientation of the Adjustment menu
when using the monitor screen in vertical display position. (Refer to “To set the orientation of the Adjustment menu [Orientation]”
• For using the monitor with “Portrait” position, the graphics board supporting portrait display is required. When using the monitor
with “Portrait” position, the setting needs to be changed depending on the graphics board used in your PC. Refer to the manual of
the graphics board for details.
• The stand of the unit can be replaced with an arm or another stand. (Refer to “5-1 Attaching an Arm” on page 34.)
Chapter 1 Features and Overview
7
Download from Www.Somanuals.com. All Manuals Search And Download.
1-ꢀ Controls and Functions
Ex. FlexStand
14
13
17
16
Adjustment menu
®
*
( ScreenManager
)
15
1
2
3
4
5
6
7 8
9
10
11 12
1
EcoView Sense sensor
Detects the movement of a person in front of the monitor. EcoView Sense
ꢀ
ꢁ
Auto EcoView sensor
EcoView button
Displays the setting menu of the power saving function (Auto EcoView,
ꢂ
ꢃ
6
Input Signal Selection button
Enter button
Switches input signals for display when two PCs are connected to the
Displays the Adjustment menu, determines an item on the menu screen, and
Control buttons (Left, Down,
Up, Right)
• Chooses an adjustment item or increases/decreases adjusted values for
•
•
or
or
button: Displays the adjustment menu of the brightness and
7
8
Power button
Turns the power on or off.
Power indicator
Indicates monitor’s operation status.
Blue: Operating
Orange: Power saving
Off: Power off
9
Main Power Switch
Turns the main power on or off.
Connects the power connector.
DVI-D Connector/D-Sub mini 15-pin connector
Connects the stereo mini jack cable.
10 Power connector
11 Input signal connectors
1ꢀ Stereo mini jack
1ꢁ Security lock slot
1ꢂ Stand
Complies with Kensington’s MicroSaver security system.
Used to adjust the height and angle of the monitor screen.
Covers the monitor cables.
1ꢃ Cable holder
16 Speaker
Outputs audio source.
17 Headphone jack
Connects the headphones.
Chapter 1 Features and Overview
8
Download from Www.Somanuals.com. All Manuals Search And Download.
1-ꢁ Functions and Basic Operation
To adjust the screen and color
[At analog signal input]
Analog input only
1
Screen Adjustment
(Automatic Adjustment)
●
●
To adjust flickering and position
To adjust color gradation automatically
[At digital signal input]
ꢀ
Screen Adjustment
(Advanced Adjustment)
[At analog signal input] [At digital signal input]
• The Adjustment menu and the FineContrast mode
name cannot be displayed at the same time.
FineContrast mode
Color Adjustment
●
●
To remove flickering or blurring
Simple Adjustment [FineContrast mode]
This function allows easy selection of a desired mode
from five modes according to monitor application.
To correct screen position
To modify blurred characters/lines
To set when a noise appears on the screen
●
●
●
*
Items marked with * can be adjusted with analog
input.
Brightness and volume direct menu
Color Adjustment
Advanced Adjustment
Brightness and Volume Adjustment
Press
or
to display the adjustment menu.
●
“Brightness”, “Contrast”, “Temperature”,
Brightness: Press
Volume : Press
or
or
.
“Gamma”, “Saturation”, “Hue” and “Gain” can be
set for each mode (Custom/sRGB/Text/Picture/
Movie).
Settable functions vary with the FineContrast
mode.
Resuming the default settings
●
To reset color adjustment values
Chapter 1 Features and Overview
9
Download from Www.Somanuals.com. All Manuals Search And Download.
To use the monitor with low power consumption
[At analog signal input]
Power-save Settings
●
●
●
Setting On/Off for Power Saving mode
Turning off the monitor automatically
Shifting to the power saving mode when a
person leaves the monitor
[At digital signal input]
• The Adjustment menu and the EcoView menu
cannot be displayed at the same time.
• EcoView menu is temporarily displayed when the
power of the monitor is turned on.
EcoView menu
Setting On/Off for the EcoView
function
(power saving function)
This monitor is equipped with the EcoView function for
power saving.
Press
to display the setting menu.
Choose the item with
with ).
Change "On" and "Off" with
(you can also choose it
or
.
or
●
●
●
Setting On/Off for the automatic brightness
adjustment function
Shifting to the power saving mode when a person
leaves the monitor
Setting On/Off for the power saving level indicator
NOTE
• EcoView Index is available only when the monitor is used
with "Landscape" position. When the monitor is used with
"Portrait" position (the orientation of the Adjustment menu
is set to "Portrait"), neither indicator nor setting menu
appear.
Chapter 1 Features and Overview
10
Download from Www.Somanuals.com. All Manuals Search And Download.
To make useful settings/adjustments
[At analog signal input]
Other Settings
●
To set input signal selection
● To change screen size
[At digital signal input]
● To adjust brightness of non-display area
●
To update menu settings
[Menu Size/Menu Position/Menu Off Timer/
To set the orientation of the Adjustment menu
Setting Power Indicator ON/OFF
To reset all adjustments to the factory default
●
●
●
Information
Sound Settings
●
Displaying Monitor Infomation [Information]
●
●
Turning off the audio output at Power Saving
Language
●
Setting Language [Language]
●
●
Enabling/Disabling DDC/CI communication
●
Chapter 1 Features and Overview
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic operation of Adjustment menu
[Displaying Adjustment menu and selecting function]
(1) Press
. The Main menu appears.
(2) Select a function with
(3) Select a function with
/
/
/
/
/
/
, and press
, and press
. The Sub menu appears.
. The adjustment/setting menu appears.
, and press . The setting is saved.
(4) Adjust the selected item with
/
/
/
[Exiting Adjustment menu]
(1) Choose <Return> from the Sub menu and press
(2) Choose <Exit> from the Main menu and press
. The Main menu appears.
. The Adjustment menu quits.
NOTE
• The Adjustment menu can also be exited by pressing
twice quickly.
• <Exit> or <Return> can also be selected by pressing
twice in the Main menu or Sub menu.
Chapter 1 Features and Overview
1ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter ꢀ Settings and Adjustments
ꢀ-1 Utility Disk
An “EIZO LCD Utility Disk” (CD-ROM) is supplied with the monitor. The following table shows the disk contents and
the overview of the software programs.
●
Disk contents and software overview
The disk includes software programs for adjustment, and User's Manual. Refer to “Readme.txt” or the “read me” file on
the disk for software startup procedures or file access procedures.
Item
Overview
OS
Windows 2000/XP/Vista
Windows
A “Readme.txt” or “read me” file
Screen Adjustment Utility
Monitor pattern display software used
when adjusting the image of the analog
input signal manually.
Screen adjustment pattern files
Used when adjusting the image of
the analog signal input manually. If
the Screen Adjustment Utility is not
applicable to your PC, use this pattern
files to adjust the image.
* If your OS is other than Windows,
download the pattern files from our
site:
ScreenManager Pro for LCD
(DDC/CI)
A software for adjusting the screen using Windows Vista
the mouse and keyboard.
EIZO ScreenSlicer
A software that divides a screen and
lays out multiple windows efficiently.
Windows XP/Vista
User’s Manual of this monitor (PDF file)
Chapter 2 Settings and Adjustments
1ꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀ-ꢀ Screen Adjustment
Digital Input
When digital signals are input, images are displayed correctly based on the
preset data of the monitor, but if characters and/or lines appear blurred, go to
step 6 “To modify blurred characters/lines [Smoothing]”. When performing
subsequent pages.
Attention
• Wait 30 minutes or more from
monitor power on before starting
adjustments. It is recommended
to turn off the EcoView Sense to
prevent the monitor from shifting to
the power saving mode in this period
(Refer to "2-9 Shifting to the power
saving mode when a person leaves the
monitor [EcoView Sense]" on page
22).
Analog Input
The monitor screen adjustment is used to suppress flickering of the screen or
adjust screen position and screen size correctly according to the PC to be used.
The auto adjust function works in the following cases:
• When a signal is input into the monitor for the first time
• When the resolution or Vertical/Horizontal Frequency not
displayed before is set
• Auto adjust function does not work
for the images under the resolution of
800 × 600 (SVGA).
If the screen is not displayed correctly even after performing the auto
adjustment, perform the screen adjustments according to the procedures on the
following pages to use the monitor comfortably.
[Adjustment Procedure]
Attention
Perform the auto adjustment.
1
• This function works correctly when
an image is fully displayed over the
Windows or Macintosh display area.
It does not work properly when an
image is displayed only on a part of
the screen (command prompt window,
for example) or when a black
● To adjust flickering, screen position, and screen size
automatically [Screen]
(1) Choose <Screen> from the <Auto Adjustment> menu, and press
.
The <Auto Adjustment> menu appears.
(2) Choose <Execute> with
or
, and press
.
background (wallpaper, etc.) is in use.
• This function does not work correctly
with some graphics boards.
Flickering, screen position, and screen size are corrected by the auto-
adjustment function.
• “Auto in Progress” appears on the
screen during auto adjustment.
If the screen is not displayed correctly even after adjusting in step
1 above, perform the adjustments according to the procedures on
the following pages. When the screen is displayed correctly, go to
step 5 “To adjust color gradation automatically [Range]”.
Prepare the display pattern for the analog display adjustment.
2
■ For Windows PC
NOTE
• For how to open and contents of the
screen adjustment pattern files, refer
to “Readme.txt”.
Load the "EIZO LCD Utility Disk" to your PC, and then start the
"Screen Adjustment Utility" from the menu window.
If it cannot be started, open the screen adjustment pattern files.
■ For other than Windows PC
Download the "Screen adjustment pattern files" from our site:
Chapter 2 Settings and Adjustments
1ꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Perform the auto adjustment again with the analog screen
adjustment pattern displayed.
3
● To adjust flickering, screen position, and screen size
automatically [Screen]
(1) Display Pattern 1 in full screen on the monitor using the “Screen
Adjustment Utility” or the screen adjustment pattern files.
(2) Choose <Screen> from the <Auto Adjustment> menu, and press
.
The <Auto Adjustment> menu appears.
(3) Choose <Execute> with
or
, and press
.
Flickering, screen position, and screen size are corrected by the auto-
adjustment function.
If the screen is not displayed correctly even after adjusting in step
3 above, perform the adjustments according to the procedures on
the following pages. When the screen is displayed correctly, go to
step 5 “To adjust color gradation automatically [Range]”.
NOTE
Perform advanced adjustments for the following using the
<Screen> menu of the Adjustment menu.
4
• Press the control button slowly so as
not to miss the adjustment point.
• When blurring, flickering or bars
appear on the screen after adjustment,
proceed to [Phase] to remove
flickering or blurring.
Adjust the clock, phase and position, in this order.
● To eliminate vertical bars [Clock]
(1) Choose <Clock> from the <Screen> menu, and press
The <Clock> menu appears.
.
(2) Adjust the clock with
or
, and press
.
The adjustment is completed.
Attention
● To remove flickering or blurring [Phase]
• Flickering or blurring may not be
eliminated depending on your PC or
graphics board.
Adjustable range: 0 to 63
(1) Choose <Phase> from the <Screen> menu, and press
The <Phase> menu appears.
.
(2) Adjust the phase with
or
, and press
.
The adjustment is completed.
NOTE
• When vertical bars appear on the
screen after adjustment, go back to
“To eliminate vertical bars [Clock]”.
(Clock → Phase → Position)
Chapter 2 Settings and Adjustments
1ꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTE
● To correct screen position [Position]
(1) Choose <Position> from the <Screen> menu, and press
The <Position> menu appears.
• Since the number of pixels and the
pixel positions are fixed on the LCD
monitor, only one position is provided
to display images correctly. The
position adjustment is made to shift
an image to the correct position.
.
(2) Adjust the position with
/
/
/
to display the image
properly in the display area of the monitor, and press
The adjustment is completed.
Adjust the color gradation.
5
● To adjust color gradation automatically [Range]
Every color gradation (0 to 255) can be displayed by adjusting the
signal output level.
(1) Display Pattern 2 in full screen on the monitor using the “Screen
Adjustment Utility” or the screen adjustment pattern files.
(2) Choose <Range> from the <Auto Adjustment> menu, and press
.
(3) Choose “Execute” with
or
, and press
.
The output range is adjusted automatically.
(4) Close the Pattern 2. When using the “Screen Adjustment Utility”,
close the program.
Modify blurred characters or lines.
6
Attention
● To modify blurred characters/lines [Smoothing]
When a image is displayed with a resolution other than the
recommendation, the characters or lines of the displayed image may be
blurred.
• Smoothing setting may not be required
depending on the display resolution.
(You cannot choose the smoothing
icon.)
Adjustable range: 1 to 5
(1) Choose <Screen> from the Adjustment menu, and press
(2) Choose <Smoothing> from the <Screen> menu, and press
The <Smoothing> menu appears.
.
.
(3) Adjust the characters/lines with
The adjustment is completed.
or
, and press
.
Chapter 2 Settings and Adjustments
16
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀ-ꢁ Color Adjustment
●
To select the display mode (FineContrast mode)
FineContrast allows you to select the best display mode easily according to the
monitor’s application.
FineContrast mode
Mode
Custom
Purpose
Available to change all setting values.
Suitable for color matching with sRGB compatible
peripherals.
sRGB
Suitable for displaying texts for word processing or
spreadsheets.
Text
Suitable for displaying images such as photos or picture
images.
Picture
Movie
Suitable for playing back animated images.
Displays the
current mode.
(1) Press
or
.
NOTE
• The Adjustment menu and the
FineContrast mode name cannot be
displayed at the same time.
• “ScreenManager Pro for LCD”
allows you to select the FineContrast
mode automatically according to the
application used.
The FineContrast mode name appears at the lower left of the screen.
(2) Change the mode by pressing
or
while mode name is displayed.
→Custom←→sRGB←→Text←→Picture←→Movie←
(Refer to “Chapter 3 Auto
FineContrast” on the User’s Manual
for “ScreenManager Pro for LCD”.)
Chapter 2 Settings and Adjustments
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Attention
●
To perform advanced adjustments
• Wait 30 minutes or more from
monitor power on before starting the
color adjustment.
Independent setting and saving of color adjustment are available for each
FineContrast mode.
• Perform the range adjustment first
when adjusting color for analog input
signals.
●
Adjustment items in each mode
According to the FineContrast mode selected, the adjustable function differs.
(Refer to “To adjust color gradation
• The same image may be seen in
different colors on multiple monitors
due to their monitor-specific
characteristics. Make fine color
adjustment visually when matching
colors on multiple monitors.
: Adjustment available −: Invalid for adjustment
√
FineContrast mode
Icon
Function
Brightness
Custom sRGB
Text
Picture
Movie
√
√
√
√
√
√
√
√
√
√
√
√
√
√
Contrast
Temperature
Gamma
Saturation
Hue
√
√
√
√
√
√
√
−
−
−
−
−
−
√
NOTE
• The values shown in “%” or “K” are
available only as reference.
−
√
−
√
• Using the “ScreenManager Pro for
LCD” allows you to perform the color
adjustment by using the mouse and
keyboard of your PC. The adjusted
status can be registered as a color data
and restore the data later. (Refer to
“Chapter 4 Color Adjustment” on the
User’s Manual for “ScreenManager
Pro for LCD”.)
√
√
Gain
−
−
−
Reset
√
√
√
●
To adjust the brightness [Brightness]
The screen brightness is adjusted by changing the brightness of the backlight
(Light source from the LCD back panel).
NOTE
• You can also adjust the brightness by
using the direct menu (Refer to "1-3
Functions and Basic Operation" on
page 9).
Adjustable range: 0 to 100%
(1) Choose <Color> from the Adjustment menu, and press
(2) Choose <Brightness> from the <Color> menu, and press
The <Brightness> adjustment menu appears.
.
.
(3) Adjust the brightness with
The adjustment is completed.
or
, and press
.
NOTE
●
To adjust the contrast [Contrast]
• In the contrast of 50%, every color
gradation is displayed.
The luminance of the screen is adjusted by varying the video signal level.
Adjustable range: 0 to 100%
• When adjusting the monitor, it
is recommended to perform the
brightness adjustment which may
not lose the gradation characteristics,
prior to the contrast adjustment.
Perform the contrast adjustment in the
following cases.
(1) Choose <Color> from the Adjustment menu, and press
(2) Choose <Contrast> from the <Color> menu, and press
The <Contrast> adjustment menu appears.
.
.
(3) Adjust the contrast with
The adjustment is completed.
or
, and press
.
– When you feel the image is dark
even if the brightness is set to
100%. (Set the contrast to higher
than 50%).
– When you feel the image is bright
even if the brightness is set to 0%.
(Set the contrast to lower than
50%).
Chapter 2 Settings and Adjustments
18
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTE
●
To adjust the color temperature [Temperature]
• You cannot adjust the value if the
icon is not displayed, depending on
the FineContrast mode selected. (See
“Adjustment items in each mode” on
page 18.)
• [Gain] allows you to perform more
advanced adjustment (See “To adjust
• If you set to [Off], the image is
displayed in the preset color of the
monitor (Gain: 100% for each RGB).
• When changing the gain value, the
color temperature adjusting range is
changed to “Off”.
The color temperature can be adjusted. The color temperature is normally used
to express the hue of “White” and/or “Black” by a numerical value. The value
is expressed in degrees “K” (Kelvin).
In the same way as the flame temperature, the image on the monitor is displayed
reddish if the color temperature is low and is bluish if the color temperature is
high. The gain preset values are set for each color temperature setting value.
5000K
The white color image is displayed reddish. The 5000K or 6000K
is usually used in the printing industry.
6500K
The white color image is displayed in warm white like paper white.
The temperature is suitable to display photographs or video
images.
9300K
The white color image is displayed slightly bluish white.
Adjustable range: Off, 4000K-10000K (specified by every 500K unit,
including 9300K)
(1) Choose <Color> from the Adjustment menu, and press
(2) Choose <Temperature> from the <Color> menu, and press
The <Temperature> adjustment menu appears.
.
.
(3) Adjust the color temperature with
The adjustment is completed.
or
, and press
.
NOTE
●
To adjust the gamma value [Gamma]
• You cannot adjust the value if the
icon is not displayed, depending on
the FineContrast mode selected. (See
“Adjustment items in each mode” on
page 18.)
The gamma value can be adjusted. The luminance of the monitor varies
depending on the input signal, however, the variation rate is not proportional to
the input signal. To keep the balance between the input signal and the luminance
of the monitor is called as “Gamma correction”.
Adjustable range: 1.8, 2.0, 2.2
(1) Choose <Color> from the Adjustment menu, and press
(2) Choose <Gamma> from the <Color> menu, and press
The <Gamma> adjustment menu appears.
.
.
(3) Adjust the gamma value with
The adjustment is completed.
or
, and press
.
Attention
●
To adjust the color saturation [Saturation]
• This function does not enable to
display every color gradation.
This function allows you to adjust the saturation of the color on the monitor.
Adjustable range: -128 to 127
NOTE
• You cannot adjust the value if the
icon is not displayed, depending on
the FineContrast mode selected. (See
“Adjustment items in each mode” on
page 18.)
(1) Choose <Color> from the Adjustment menu, and press
(2) Choose <Saturation> from the <Color> menu, and press
The <Saturation> adjustment menu appears.
.
.
(3) Adjust the saturation of the color with
The adjustment is completed.
or
, and press
.
• Setting the minimum (-128) turns the
image to a monochrome screen.
Chapter 2 Settings and Adjustments
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Attention
●
To adjust the hue [Hue]
• This function does not enable to
display every color gradation.
This function allows you to adjust the hue. If you set the hue to a high value,
the image turns greenish. If low, the image turns purplish.
Adjustable range: -32 to 32
NOTE
• You cannot adjust the value if the
icon is not displayed, depending on
the FineContrast mode selected. (See
“Adjustment items in each mode” on
page 18.)
(1) Choose <Color> from the Adjustment menu, and press
.
(2) Choose <Hue> from the <Color> menu, and press
The <Hue> adjustment menu appears.
.
(3) Adjust the hue with
or
, and press
.
The adjustment is completed.
Attention
●
To adjust the gain value [Gain]
• This function does not enable to
display every color gradation.
Each luminance of red/green/blue composing the color is called “Gain”. The
gain adjustment may change the color tone of the “White” (when the max input
signal for each color is obtained)
NOTE
• You cannot adjust the value if the
icon is not displayed, depending on
the FineContrast mode selected. (See
“Adjustment items in each mode” on
page 18.)
• The gain value may change depending
on the value of the color temperature.
• When changing the gain value, the
color temperature adjusting range is
changed to “Off”.
Adjustable range: 0 to 100%
(1) Choose <Color> from the Adjustment menu, and press
(2) Choose <Gain> from the <Color> menu, and press
The <Gain> adjustment menu appears.
.
.
(3) Adjust the respective value of Red, Green or Blue with
or
, and press
.
The adjustment is completed.
NOTE
ꢀ-ꢂ Adjusting Volume [Volume]
This function allows you to adjust volume up or down.
Adjustable range: 0 to 20
• You can also adjust the brightness by
using the direct menu (Refer to "1-3
Functions and Basic Operation" on
page 9).
(1) Choose <Sound> from the Adjustment menu, and press
(2) Choose <Volume> from the <Sound> menu, and press
The volume adjustment menu appears.
.
.
(3) Adjust the volume with
The adjustment is completed.
or
, and press
.
ꢀ-ꢃ Turning off the audio output at Power
Saving mode [Power Save]
This monitor allows you to turn off the audio output from the speakers/
headphone at the power saving mode.
(1) Choose <Sound> from the Adjustment menu, and press
(2) Choose <Power Save> from the <Sound> menu, and press
The <Power Save> setting menu appears.
.
.
(3) Select “On” or “Off” with
The setting is completed.
or
, and press
.
Chapter 2 Settings and Adjustments
ꢀ0
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀ-6 Setting On/Off for Power Saving mode
[Power Save]
This function allows you to set the monitor into the power saving mode
according to the PC status. When the monitor has shifted to the power saving
mode, the images on the screen are not displayed.
(1) Choose <PowerManager> from the Adjustment menu, and press
(2) Choose <Power Save> from the <PowerManager> menu, and press
The <Power Save> setting menu appears.
.
.
(3) Select “On” or “Off” with
The setting is completed.
or
, and press
.
■
Analog input
This monitor complies with the VESA DPMS standard.
Attention
• Turning off the main power switch
or unplugging the power cord
completely shuts off power supply to
the monitor.
• Power consumption varies even
when the stereo mini jack cable is
connected.
[Power Saving System]
Power
Indicator
PC
Monitor
Operating
Operating
Power saving
Blue
Orange
Power saving
STAND-BY
SUSPENDED
OFF
■
Digital input
This monitor complies with the DVI DMPM standard.
[Power Saving System]
The monitor enters the power saving mode in five seconds in connection with
the PC setting.
PC
Monitor
Operating
Power saving
Power Indicator
Blue
Orange
Operating
Power saving
ꢀ-7 Turning off the monitor automatically
[Off Timer]
This function allows you to switch the setting to turn off the monitor
automatically after a specified time has passed at the power saving mode.
Adjustable range: Disable, Enable (0, 1, 2, 3, 5, 10, 15, 20, 25, 30, 45 min,
1-5h)
(1) Choose <PowerManager> from the Adjustment menu, and press
(2) Choose <Off Timer> from the <PowerManager> menu, and press
The <Off Timer> setting menu appears.
.
.
(3) Select “Enable” or “Disable” with
or
.
When selecting “Enable”, set a monitor Off time with
or
.
(4) Press
.
The setting is completed.
Chapter 2 Settings and Adjustments
ꢀ1
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀ-8 Setting On/Off for the automatic
brightness adjustment function
[Auto EcoView]
The sensor on the front side of the monitor detects the environmental brightness
to adjust the screen brightness automatically and comfortably by using the Auto
EcoView function.
NOTE
• Be careful not to block the sensor on
the lower side of the monitor when
using the Auto EcoView function.
(1) Press
.
The <EcoView> setting menu appears.
(2) Choose "Auto EcoView" with
(3) Select “On” or “Off” with
or
. (You can also choose it with
, and press
.)
or
.
ꢀ-9 Shifting to the power saving mode
when a person leaves the monitor
[EcoView Sense]
The sensor on the front side of the monitor detects the movement of a person by
using the EcoView Sense function. When a person moves away from the
monitor, it shifts to the power saving mode automatically and does not display
the images on the screen to reduce the power consumption. When a person
comes near the monitor again, it comes back from the power saving mode and
displays the images. The detection level of the EcoView Sense sensor can be
changed according to the environment of usage.
●
To set EcoView Sense On/Off
NOTE
• When the orientation of the
Adjustment menu is set to "Portrait",
the EcoView Sense is turned off (see
2-13 "Setting Orientation" on page
(1) Press
.
The <EcoView> setting menu appears.
(2) Choose "EcoView Sense" with
or
. (You can also choose it with
.)
(3) Select “On” or “Off” with
or
, and press
.
●
To change the detection level
NOTE
The default setting is "Auto". If the monitor does not shift to the power saving
mode as you intended, change the detection level according to the following
procedure.
• If any moving object has not been
detected for a certain period of
time when the detection level is set
to "Auto" or "Manual1", the icon
appears that indicates the monitor is
shifting to the power saving mode.
Adjustable range: see below list
Detectable
Range
Level
Details
The detectable range is defined by the
Auto
Automatic setting person's movement. When you get out
(default setting) (120 cm or less) of the range, the monitor shifts to the
power saving mode. Since the function
determines whether the object is moving
or not, the monitor can shift to the power
saving mode even if there is a chair or wall
in the detectable range.
Automatic setting
(90 cm or less)
Manual1
Manual2
When you get out of the detectable range,
the monitor shifts to the power saving
mode. This setting is recommended if
the monitor frequently shifts to the power
saving mode when the level is "Auto" or
"Manual1" even though you are in front of
the monitor.
120 cm or less
90 cm or less
Manual3
Chapter 2 Settings and Adjustments
ꢀꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
(1) Choose <PowerManager> from the Adjustment menu, and press
.
(2) Choose <EcoView Sense> from the <PowerManager> menu, and press
The <EcoView Sense> setting menu appears.
.
(3) Select "Auto" or "Manual" with
When selecting "Manual", select 1, 2 or 3 for the detection level of the
sensor with or
(4) Press
or
.
.
.
The setting is completed.
NOTE
ꢀ-10 Setting On/Off for the power saving
level indicator [EcoView Index]
• EcoView Index is available only when
the monitor is used with "Landscape"
position. When the monitor is
used with "Portrait" position (the
orientation of the Adjustment menu is
set to "Portrait"), neither indicator nor
setting menu appear.
By using the EcoView Index function, the indicator that shows the level of
power saving appears at the time of turning on the monitor, adjusting the
brightness or switching the FineContrast mode.
The power saving ratio comes to high as the indicator level meter lights towards
right.
(1) Press
.
The <EcoView> setting menu appears.
(2) Choose "EcoView Index" with
or
. (You can also choose it with
.)
(3) Select “On” or “Off” with
or
, and press
.
Chapter 2 Settings and Adjustments
ꢀꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀ-11 Screen Size Selection
●
To change screen size [Screen Size]
The image with the resolution other than the recommended resolution is
displayed in full screen automatically. You can change the screen size by using
<Screen Size> from <Others> menu.
Menu
Function
Displays an image in full screen. Images are distorted in
some cases because the vertical rate is not equal to the
horizontal rate.
Full Screen
(default setting)
Displays an image in full screen. In some cases, a blank
horizontal or vertical border appears to equalize the vertical
rate and the horizontal rate.
Enlarged
Normal
Displays images with the specified resolution.
Example: Image size 1024 × 768 in case of EV2023W
Full Screen
(Default setting)
Normal
Enlarged
(1600 × 900)
(1200 × 900)
(1024 × 768)
(1) Choose <Others> from the Adjustment menu, and press
(2) Choose <Screen Size> from the <Others> menu, and press
The screen size setting window appears.
.
.
(3) Select “Full Screen,” “Enlarged,” or “Normal” with
press
or
, and
.
The screen size setting is completed.
●
To adjust brightness of non-display area [Border Intensity]
A border (black area with no image) around the image appears in the “Normal”
or “Enlarged” mode.
Border
(1) Choose <Others> from the Adjustment menu, and press
.
(2) Choose <Border Intensity> from the <Others> menu, and press
The <Border Intensity> menu appears.
.
(3) Adjust border intensity with
or
, and press
.
The border intensity adjustment is completed.
Chapter 2 Settings and Adjustments
ꢀꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀ-1ꢀ Setting Adjustment Menu Display
●
To update menu settings [Menu Size/Menu Position/Menu
Off Timer/Translucent]
Menu Size
Change the Adjustment menu size using the following procedure.
(1) Choose <Others> from the Adjustment menu, and press
.
(2) Choose <Menu Settings> from the <Others> menu, and press
.
(3) Choose <Menu Size> from the <Menu Settings> menu, and press
The <Menu Size> menu appears.
.
(4) Select “Normal” or “Enlarged” with
The setting is completed.
or
, and press
.
Menu Position
Adjust the menu position using the following procedure.
(1) Choose <Others> from the Adjustment menu, and press
.
(2) Choose <Menu Settings> from the <Others> menu, and press
.
(3) Choose <Menu Position> from the <Menu Settings> menu, and press
The <Menu Position> menu appears.
.
(4) Select a menu position with
The setting is completed.
/
/
/
, and press
.
NOTE
Menu Off Timer
• The display time of the FineContrast
mode, EcoView menu and EcoView
Index remains unchanged.
Set the menu display time using the following procedure.
Adjustment range: Disable, Enable (15, 30, 45, 60s)
(1) Choose <Others> from the Adjustment menu, and press
.
(2) Choose <Menu Settings> from the <Others> menu, and press
.
(3) Choose <Menu Off Timer> from the <Menu Settings> menu, and press
The <Menu Off Timer> menu appears.
.
(4) Select “Enable” or “Disable” with
or
.
When selecting “Enable”, choose a time for displaying menu with
.
or
(5) Press
.
The setting is completed.
Translucent
Set the transparency for menu display using the following procedure.
(1) Choose <Others> from the Adjustment menu, and press
.
(2) Choose <Menu Settings> from the <Others> menu, and press
.
(3) Choose <Translucent> from the <Menu Settings> menu, and press
The <Translucent> menu appears.
.
.
(4) Adjust the transparency for menu display with
The setting is completed.
or
, and press
Chapter 2 Settings and Adjustments
ꢀꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTE
ꢀ-1ꢁ Setting Orientation
• For using the monitor with
“Portrait” position, the graphics
board supporting portrait display is
required. When using the monitor
with “Portrait” position, the setting
needs to be changed depending on the
graphics board used in your PC. Refer
to the manual of the graphics board
for details.
●
To set the orientation of the Adjustment menu [Orientation]
This function allows you to change the orientation of the Adjustment menu
when using the monitor screen in vertical display position.
(1) Choose <Others> from the Adjustment menu, and press
(2) Choose <Orientation> from the Others menu, and press
The <Orientation> menu appears.
.
.
(3) Select “Landscape” or “Portrait” with
The setting is completed.
or
, and press
.
(4) When selecting “Portrait”, turn the monitor screen 90° in clockwise
direction.
ꢀ-1ꢂ Locking Buttons
This function allows you to lock
to prevent changing the adjusted/set status.
(1) Press
(2) Press
to turn off the monitor.
holding down to turn on the monitor.
The Lock/Unlock setting is toggled by performing the operation in step 2.
NOTE
ꢀ-1ꢃ Displaying Monitor Infomation
[Information]
• The usage time is not always “0”
when you purchase the monitor due
to factory inspection.
This function allows you to display the input signal status, current resolution
and model name.
Information 1/3 : Input signal status (analog/digital), resolution and H/V
frequency
Information 2/3 : Enable/Disable setting for DDC/CI
Information 3/3 : Model name, serial number and usage time
(1) Choose <Information> from the Adjustment menu, and press
The <Information> menu appears.
.
(2) Then, press
to check settings, etc.
Chapter 2 Settings and Adjustments
ꢀ6
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTE
ꢀ-16 Enabling/Disabling DDC/CI
communication [DDC/CI]
• You can check the DDC/CI setting in
the <Information> menu.
This function allows you to enable/disable the DDC/CI communication.
(1) Press
(2) Press
to turn off the monitor.
holding down to turn on the monitor.
The Enable/Disable setting is toggled by performing the operation in step 2.
ꢀ-17 Setting Power Indicator ON/OFF
[Power Indicator]
This function allows you to set the power indicator (blue) ON/OFF in the
monitor ON condition.
(1) Choose <Others> from the Adjustment menu, and press
.
(2) Choose <Power Indicator> from the <Others> menu, and press
The <Power Indicator> menu appears.
.
(3) Select “Enable” or “Disable” with
The setting is completed.
or
, and press
.
ꢀ-18 Setting Language [Language]
This function allows you to select a language for the adjustment menu or
displaying message.
Selectable languages
English/German/French/Spanish/Italian/Swedish/Simplified Chinese/
Traditional Chinese/Japanese
(1) Choose <Language> menu from the Adjustment menu, and press
.
The <Language> menu appears.
(2) Choose a language with
The setting is completed.
/
/
/
, and press
.
ꢀ-19 Setting EIZO logo display ON/OFF
The EIZO logo appears on the display when turning on the monitor. This
function allows you to display, or not, the EIZO logo.
(1) Press
(2) Press
to turn off the monitor.
holding down to turn on the monitor.
The EIZO logo display setting is toggled by performing the operation in step 2.
Chapter 2 Settings and Adjustments
ꢀ7
Download from Www.Somanuals.com. All Manuals Search And Download.
Attention
ꢀ-ꢀ0 Resuming the Default Setting [Reset]
There are two types of Reset. One is to reset the color adjustment only to the
default settings, and the other is to reset all the settings to the default settings.
• After resetting, you cannot undo the
operation.
●
To reset color adjustment values
Only the adjustment values in the current FineContrast mode will revert to the
default settings (factory settings).
(1) Choose <Color> from the Adjustment menu, and press
(2) Choose <Reset> from the <Color> menu and press
The <Reset> menu appears.
.
.
(3) Select <Reset> with
or
, and press
.
The color adjustment values revert to the default settings.
●
NOTE
To reset all adjustments to the factory default settings
• For default settings, refer to “Main
default settings (factory settings)” in
Specifications Sheet.
Reset all adjustments to the factory default settings.
(1) Choose <Others> from the Adjustment menu, and press
(2) Choose <Reset> from the <Others> menu, and press
The <Reset> menu appears.
.
.
(3) Select <Reset> with
or
, and press
.
All setting values revert to the default settings.
Chapter 2 Settings and Adjustments
ꢀ8
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter ꢁ Connecting Cables
ꢁ-1 Connecting Two PCs to the Monitor
Two PCs can be connected to the monitor through the DVI-D and the D-Sub
mini 15 pin connector on the back of the monitor.
Connection examples
D-Sub mini
DVI-D connector 15-pin Connector
To PC 2
To PC 1
D-Sub mini 15-pin
Connector
DVI-D connector
Signal cable
MD-C87
Signal cable
(Digital) FD-C39
●
To switch the input signal
The input signal switches each time
is pressed.
When the signal is switched, the active input port name appears at the top right
corner of the screen.
Chapter 3 Connecting Cables
ꢀ9
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTE
●
To set input signal selection [Input Signal]
• When “Auto” is selected for <Input
Signal>, the monitor’s power-saving
function works only when the two
PCs are in the power-saving mode.
The monitor recognizes the connector through which PC signals are input.
When either PC is turned off or enters the power-saving mode, the monitor
automatically displays signals of another PC.
Priority setting
Auto
Function
When either PC is turned off or enters the power-
saving mode, the monitor automatically displays
signals of another PC.
Manual
The monitor detects only the PC’s signals currently
displaying automatically. Select an active input signal
with
.
[Input signal setting]
(1) Choose <Others> from the Adjustment menu, and press
(2) Choose <Input Signal> from the <Others> menu, and press
The <Input Signal> menu appears.
.
.
(3) Select “Auto” or “Manual” with
The setting is completed.
or
, and press
.
Chapter 3 Connecting Cables
ꢁ0
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter ꢂ Troubleshooting
If a problem still remains after applying the suggested remedies, contact your local dealer.
• No-picture problems → See No.1 - No.2.
• Imaging problems (digital input) → See No.3 - No.8.
• Imaging problems (analog input) → See No.3 - No.12.
• Other problems → See No.13 - No.18.
Problems
Possible cause and remedy
1. No picture
• Power indicator does not light.
• Check whether the power cord is connected correctly. If
the problem persists, turn off the monitor, and then turn it
on again a few minutes later.
• Turn the main power switch on.
• Press
.
• Power indicator is lighting blue.
• Power indicator is lighting orange.
• Set each adjusting value in [Brightness], [Contrast] and
• Switch the input signal with
.
• Operate the mouse or keyboard.
• Check whether the PC is turned on.
• When the EcoView Sense is on, the monitor may have
shifted to the power saving mode. Come near to the
monitor.
ꢀ. The message below appears.
This message appears when the signal is not input
correctly even when the monitor functions properly.
• This message appears when no signal is input.
• The message shown left may appear, because some
PCs do not output the signal soon after power-on.
• Check whether the PC is turned on.
• Check whether the signal cable is connected properly.
• Switch the input signal with
.
• The message shows that the input signal is out of the • Check whether the signal setting of your PC matches
specified frequency range. (Such signal frequency is
displayed in red.)
Example:
the resolution and the vertical frequency settings for
the monitor. (see "Compatible Resolutions" of the
Specifications Sheet)
• Reboot the PC.
• Select an appropriate display mode using the graphics
board’s utility. Refer to the manual of the graphics board
for details.
fD : Dot Clock
(Displayed only when the digital signal inputs)
fH : Horizontal Frequency
fV : Vertical Frequency
ꢁ. The screen is too bright or too dark.
• Adjust using [Brightness] or [Contrast]. (The LCD
monitor backlight has a fixed life span. When the screen
becomes dark or begins to flicker, contact your local
dealer.)
• Turn on the Auto EcoView function. The monitor detects
the environmental brightness to adjust the screen
brightness automatically.
ꢂ. Characters are blurred.
• Check whether the signal setting of your PC matches
the resolution and the vertical frequency settings for
the monitor. (see "Compatible Resolutions" of the
Specifications Sheet)
Chapter 4 Troubleshooting
ꢁ1
Download from Www.Somanuals.com. All Manuals Search And Download.
Problems
ꢃ. Afterimages appear.
Possible cause and remedy
• Use a screen saver or off timer function for a long-time
image display.
• Afterimages are particular to LCD monitors. Avoid
displaying the same image for a long time.
6. Green/red/blue/white dots or defective dots remain • This is due to LCD panel characteristics and is not a
on the screen. failure.
7. Interference patterns or pressure marks remain on • Leave the monitor with a white or black screen. The
the screen.
symptom may disappear.
8. Noise appears on the screen.
• When entering the singnals of analog input, change
the setting to “On” in <Signal Filter> from the <Screen>
menu.
• When entering the signals of HDCP system, the normal
images may not be displayed immediately.
9. Display position is incorrect.
• Adjust image position so that it is displayed properly
• If the problem persists, use the graphics board’s utility if
available to change the display position.
image is flickering.
11. Whole screen is flickering or blurring.
1ꢀ. Upper part of the screen is distorted as shown
below.
• This is caused when both composite sync (X-OR)
signal and separate vertical sync signal are input
simultaneously. Select either composite signal or
separate signal.
1ꢁ. The <Smoothing> icon on the Adjustment menu
<Screen> cannot be selected.
• You cannot choose the smoothing icon when the screen
is displayed in the following resolutions or settings.
• 1600 × 900 (EV2023W)
• 1920 × 1080 (EV2303W)
• Select [Normal] during <Screen Size>.
1ꢂ. The adjustment menu does not appear.
1ꢃ. The FineContrast mode is not displayed.
16. The auto adjust function does not work correctly.
• Check whether the operation lock function works.
• Check whether the Main menu of Adjustment menu is
• This function does not work when digital signal is input.
• This function does not work correctly with some graphics
boards.
17. No audio output.
• Check whether the mini jack cable is correctly
connected.
• Check whether volume is set to 0.
• Check the setting of the PC and the audio playback
software.
Chapter 4 Troubleshooting
ꢁꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Problems
Possible cause and remedy
18. (When using EcoView Sense)
• Check the setting environment of the monitor.
EcoView Sense may not work correctly in the following
environments.
• There is something that reflects the light such as mirror
or glass in front of the sensor.
The images remains to be displayed when you
move away from the monitor. The images does not
reappear when you come near it.
• The monitor is located in a place that receive direct
sunlight.
• There is some infrared device near the monitor.
• There is some obstacle in front of the sensor.
• Check whether any dirt on the sensor. Clean the sensor
with a soft cloth.
• Check whether you are in front of the monitor. The
infrared ray is emitted vertically from the sensor to detect
a person.
• Check whether the off timer function is on. If it is on, the
monitor turns off automatically after a specified time has
passed. Therefore, the images does not reappear on the
screen even though you come near to it. Press
to
Chapter 4 Troubleshooting
ꢁꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter ꢃ Reference
ꢃ-1 Attaching an Arm
Attention
The stand can be removed and replaced with an arm (or another stand) to be
attached to the monitor. Use an arm or stand of EIZO option.
• When attaching an arm or stand,
follow the instructions of their user’s
manual.
• When using another manufacturer’s
arm or stand, confirm the following in
advance and select one conforming to
the VESA standard. Use the M4 × 12
screws supplied with this monitor.
– Clearance between the screw holes:
100 mm × 100 mm
When using the monitor with "Portrait" position, change the
position to "Landscape".
1
Lay the LCD monitor on a soft cloth spread over on a stable
surface with the panel surface facing down.
2
– Thickness of plate: 2.6 mm
– Strong enough to support weight of
the monitor unit (except the stand)
and attachments such as cables.
• When using an arm or stand, attach it
to meet the following tilt angles of the
monitor.
– Up 45 degrees, down 45 degrees
(horizontal display, and vertical
display rotated 90 degrees
clockwise)
• Connect the cables after attaching an
arm.
• Do not move the removed stand up
and down. Doing so may result in
injury or device damage.
Chapter 5 Reference
ꢁꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Remove the stand.
3
● FlexStand
Remove the stand from the monitor while releasing the lock.
● TriStand
Prepare a screwdriver. Loosen the screw securing the unit and the stand with
the screwdriver.
Attach the monitor to the arm or stand.
4
Secure the monitor to the arm or stand using the screws specified in the
user’s manual of the arm or stand.
Chapter 5 Reference
ꢁꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢃ-ꢀ Attaching the FlexStand
The once removed the FlexStand can be attached to the monitor again with the
following procedures.
Put the insertion part of the stand in the slot of the monitor.
1
At the time, use as a guide that the marks (1) on the stand match to the
screw holes (2) of the monitor.
ꢀꢃꢂ
Screw holes
ꢀꢁꢂ
Marks
Attach the stand moving the monitor toward the stand.
2
Make sure that the lock is latched with clicking sound.
Incorrect Correct
Chapter 5 Reference
ꢁ6
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢃ-ꢁ Attaching the TriStand
The once removed the TriStand can be attached to the monitor again with the
following procedures.
Lay the LCD monitor on a soft cloth spread over on a stable
surface with the panel surface facing down.
1
Put the insertion part of the stand in the slot of the monitor.
2
Prepare a screwdriver. Press the upper part of the stand
against the unit and tighten the screw with the screwdriver to
3
fix the stand to the unit.
Chapter 5 Reference
ꢁ7
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢃ-ꢂ Folding the TriStand
Perform the following procedures to remove the stand base and fold the stand
when re-packing a monitor with a TriStand.
Open the cable holder.
1
Adjust the monitor to its lowest position, and insert a pin into
the stand.
2
Lay the LCD monitor on a soft cloth spread over on a stable
surface with the panel surface facing down.
3
Open the cover of stand base.
4
Chapter 5 Reference
ꢁ8
Download from Www.Somanuals.com. All Manuals Search And Download.
Rotate the stand base in a counterclockwise direction while
holding down the protrusion, and then remove the stand base.
5
Chapter 5 Reference
ꢁ9
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢃ-ꢃ Glossary
Clock
The analog input monitor needs to reproduce a clock of the same frequency as the dot clock of the graphics system in
use, when the analog input signal is converted to a digital signal for image display.
This is called clock adjustment. If the clock pulse is not set correctly, some vertical bars appear on the screen.
DDC/CI (Display Data Channel/Command Interface)
VESA provides the standardization for the interactive communication of the setting information, etc. between a PC
and the monitor.
DVI (Digital Visual Interface)
DVI is a digital interface standard. DVI allows direct transmission of the PC’s digital data without loss.
This adopts the TMDS transmission system and DVI connectors. There are two types of DVI connectors. One is
a DVI-D connector for digital signal input only. The other is a DVI-I connector for both digital and analog signal
inputs.
DVI DMPM (DVI Digital Monitor Power Management)
DVI DMPM is a digital interface power-saving function. The “Monitor ON (operating mode)” and “Active Off
(power-saving mode)” are indispensable for DVI DMPM as the monitor’s power mode.
Gain
This is used to adjust each color parameter for red, green and blue. An LCD monitor displays the color by the light
passing through the panel color filter. Red, green and blue are the three primary colors. All the colors on the screen
are displayed by combining these three colors. The color tone can be changed by adjusting the light intensity (volume)
passing through each color’s filter.
Gamma
Generally, the monitor brightness varies nonlinearly with the input signal level, which is called “Gamma
Characteristic”. A small gamma value produces a low-contrast image, while a large gamma value produces a high-
contrast image.
HDCP (High-bandwidth Digital Contents Protection)
Digital signal coding system developed to copy-protect the digital contents, such as video, music, etc. This helps
to transmit the digital contents safely by coding the digital contents sent via DVI terminal on the output side and
decoding them on the input side.
Any digital contents cannot be reproduced if both of the equipments on the output and input sides are not applicable
to HDCP system.
Phase
Phase means the sampling timing to convert the analog input signal to a digital signal. Phase adjustment is made to
adjust the timing. It is recommended that phase adjustment be made after the clock is adjusted correctly.
Range Adjustment
Range adjustment controls the signal output levels to display every color gradation. It is recommended that range
adjustment be made before color adjustment.
Resolution
The LCD panel consists of numerous pixels of specified size, which are illuminated to form images. This monitor
consists of 1600 (EV2023W) / 1920 (EV2303W) horizontal pixels and 900 (EV2023W) / 1080 (EV2303W) vertical
pixels. At a resolution of 1600 × 900 (EV2023W) / 1920 × 1080 (EV2303W), all pixels are illuminated as a full
screen (1:1).
Chapter 5 Reference
ꢂ0
Download from Www.Somanuals.com. All Manuals Search And Download.
sRGB (Standard RGB)
International standard for “color reproduction and color space” among peripheral devices (such as monitors, printers,
digital cameras, scanners). sRGB allows Internet users to closely match colors as a simple color matching means for
the Internet use.
Temperature
Color temperature is a method to measure the white color tone, generally indicated in degrees Kelvin. The screen
becomes reddish at a low temperature, and bluish at a high temperature, like the flame temperature.
5000K: Slightly reddish white
6500K: Warm white like paper white
9300K: Slightly bluish white
TMDS (Transition Minimized Differential Signaling)
A signal transmission system for digital interface.
VESA DPMS (Video Electronics Standards Association - Display Power Management Signaling)
VESA provides the standardization of signals from PC (graphics board) for power saving of PC monitors. DPMS
defines the signal status between PC and monitor.
Chapter 5 Reference
ꢂ1
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢃ-6 Preset Timing
The following table shows factory preset video timing (for analog signal only).
Attention
• Display position may be deviated
depending on the PC connected,
which may require screen adjustment
using Adjustment menu.
Frequency
Mode
Dot clock
Horizontal: kHz Polarity
Vertical: Hz
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
31.47
59.94
31.47
70.09
37.86
72.81
37.50
75.00
35.16
56.25
37.88
60.32
48.08
72.19
46.88
75.00
48.36
60.00
56.48
70.07
60.02
75.03
67.50
75.00
45.00
60.00
60.00
60.00
63.98
60.02
79.98
75.03
60.00
60.00
65.29
59.95
67.50
60.00
Negative
Negative
Negative
Positive
Negative
Negative
Negative
Negative
Positive
Positive
Positive
Positive
Positive
Positive
Positive
Positive
Negative
Negative
Negative
Negative
Positive
Positive
Positive
Positive
Positive
Positive
Positive
Positive
Positive
Positive
Positive
Positive
Positive
Positive
Negative
Positive
Positive
Positive
• If a signal other than those listed in
the table is input, adjust the screen
using the Adjustment menu. However,
screen display may still be incorrect
even after the adjustment.
• When interlace signals are used, the
screen cannot be displayed correctly
even after screen adjustment using the
Adjustment menu.
VGA 640×480@60Hz
25.2 MHz
28.3 MHz
31.5 MHz
31.5 MHz
36.0 MHz
40.0 MHz
50.0 MHz
49.5 MHz
65.0 MHz
75.0 MHz
78.8 MHz
108.0 MHz
74.3 MHz
108.0 MHz
108.0 MHz
135.0 MHz
108.0 MHz
146.3 MHz
148.5 MHz
VGA TEXT
720×400@70Hz
VESA 640×480@73Hz
VESA 640×480@75Hz
VESA 800×600@56Hz
VESA 800×600@60Hz
VESA 800×600@72Hz
VESA 800×600@75Hz
VESA 1024×768@60Hz
VESA 1024×768@70Hz
VESA 1024×768@75Hz
VESA 1152×864@75Hz
VESA 1280×720@60Hz
VESA 1280×960@60Hz
(EV2303W)
VESA 1280×1024@60Hz
(EV2303W)
VESA 1280×1024@75Hz
(EV2303W)
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
VESA RB 1600×900
@60Hz (EV2023W)
VESA CVT 1680×
1050@60Hz (EV2303W)
VESA 1920×1080@60Hz
(EV2303W)
Chapter 5 Reference
ꢂꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
For U.S.A. , Canada, etc. (rated 100-120 Vac) Only
FCC Declaration of Conformity
We, the Responsible Party
EIZO NANAO TECHNOLOGIES INC.
5710 Warland Drive, Cypress, CA 90630
Phone: (562) 431-5011
declare that the product
Trade name: EIZO
Model: FlexScan EV2023W/EV2303W
is in conformity with Part 15 of the FCC Rules. Operation of this product is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures.
* Reorient or relocate the receiving antenna.
* Increase the separation between the equipment and receiver.
* Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
* Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
Note
Use the attached specified cable below or EIZO signal cable with this monitor so as to keep interference within the
limits of a Class B digital device.
- AC Cord
- Shielded Signal Cable (enclosed)
Canadian Notice
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de le classe B est comforme à la norme NMB-003 du Canada.
ꢂꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Hinweise zur Auswahl des richtigen Schwenkarms für Ihren Monitor
Dieser Monitor ist für Bildschirmarbeitsplätze vorgesehen. Wenn nicht der zum Standardzubehör gehörige
Schwenkarm verwendet wird, muss statt dessen ein geeigneter anderer Schwenkarm installiert werden. Bei der
Auswahl des Schwenkarms sind die nachstehenden Hinweise zu berücksichtigen:
Der Standfuß muß den nachfolgenden Anforderungen entsprechen:
a)Der Standfuß muß eine ausreichende mechanische Stabilität zur Aufnahme des Gewichtes vom Bildschirmgerät
und des spezifizierten Zubehörs besitzen. Das Gewicht des Bildschirmgerätes und des Zubehörs sind in der
zugehörenden Bedienungsanleitung angegeben.
b)Die Befestigung des Standfusses muß derart erfolgen, daß die oberste Zeile der Bildschirmanzeige nicht höher
als die Augenhöhe eines Benutzers in sitzender Position ist.
c)Im Fall eines stehenden Benutzers muß die Befestigung des Bildschirmgerätes derart erfolgen, daß die Höhe der
Bildschirmmitte über dem Boden zwischen 135 – 150 cm beträgt.
d)Der Standfuß muß die Möglichkeit zur Neigung des Bildschirmgerätes besitzen (max. vorwärts: 5°, min. nach
hinten ≥ 5°).
e)Der Standfuß muß die Möglichkeit zur Drehung des Bildschirmgerätes besitzen (max. ±180°). Der maximale
Kraftaufwand dafür muß weniger als 100 N betragen.
f) Der Standfuß muß in der Stellung verharren, in die er manuell bewegt wurde.
g)Der Glanzgrad des Standfusses muß weniger als 20 Glanzeinheiten betragen (seidenmatt).
h)Der Standfuß mit Bildschirmgerät muß bei einer Neigung von bis zu 10° aus der normalen aufrechten Position
kippsicher sein.
Hinweis zur Ergonomie :
Dieser Monitor erfüllt die Anforderungen an die Ergonomie nach EK1-ITB2000 mit dem Videosignal, 1600 × 900
(EV2023W)/1920 × 1080 (EV2303W), Digital Eingang und mindestens 60,0 Hz Bildwiederholfrequenz, non
interlaced. Weiterhin wird aus ergonomischen Gründen empfohlen, die Grundfarbe Blau nicht auf dunklem
Untergrund zu verwenden (schlechte Erkennbarkeit, Augenbelastung bei zu geringem Zeichenkontrast.)
Übermäßiger Schalldruck von Ohrhörern bzw. Kopfhörern kann einen Hörverlust bewirken.
Eine Einstellung des Equalizers auf Maximalwerte erhöht die Ausgangsspannung am Ohrhörer- bzw.
Kopfhörerausgang und damit auch den Schalldruckpegel.
„Maschinenlärminformations-Verordnung 3. GPSGV:
Der höchste Schalldruckpegel beträgt 70 dB(A) oder weniger gemäss EN ISO 7779“
[Begrenzung des maximalen Schalldruckpegels am Ohr]
Bildschirmgeräte: Größte Ausgangsspannung 150 mV
ꢂꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|
