Network Supported
❏Wireless LAN
Multimedia Projector
IEEE802.11b/g
❏Wired LAN
100-Base-TX/10-Base-T
Memory Viewer
❏SD Card Memory Viewer
✽Refer to the owner’s manuals below for details
about network and memory viewer function.
■Network Set-up and Operation
■Memory viewer
MODEL LC-WB40N
Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Features and Design
This Multimedia Projector is designed with the most advanced technology for portability, durability, and ease of use.
This projector utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal display
(LCD) technology.
◆ Compact Design
◆ Multilanguage Menu Display
This projector is designed compact in size and weight.
It is easy to carry and installed anywhere you wish to
use.
Operation menu is available in 16 languages; English,
German, French, Italian, Spanish, Portuguese, Dutch,
Swedish, Finnish, Polish, Hungarian, Romanian,
Russian, Chinese, Korean, and Japanese (p.47).
◆ Capable of ꢁ60-degree Projection
◆ Security Function
This projector is capable of 360-degree projection.
*Some restriction required, see page 8.
The Security function helps you to ensure security
of the projector. With the Key lock function, you can
lock the operation on the top control or remote control
(p.54). PIN code lock functions prevents unauthorized
use of the projector (pp.22, 54–55).
◆ Antitheft Alarm Function
This projector is equipped with an Antitheft alarm
function which sounds when vibration is detected
(pp.58–61). A built-in rechargeable battery is used for
the alarm.
◆
Helpful Maintenance Functions
Lamp and filter maintenance functions provide for
better and proper maintenance of the projector.
◆ Simple Computer System Setting
The projector has the Multi-scan system to conform to
almost all computer output signals quickly (p.32). Up to
UXGA resolution can be accepted.
◆ LAN Network Function
This projector is loaded with the Wired and Wireless
LAN network function. You can project an image on a
computer as well as operate and manage the projector
via network. For details, refer to the owner’s manual
“Network Set-up and Operation.”
◆ Useful Functions for Presentations
- The digital zoom function allows you to focus on the
crucial information during a presentation (p.39).
◆ Memory Viewer Function
- Blackboards* can be used as a projection screen.
*The board color is limited to Green (pp.36, 43).
Insert the dedicated SD card memory into the
projector to project images or presentation data stored
within. You do not have to carry computers or other
equipment for a presentation.
*SD card memory is not supplied with the projector.
For details, refer to the owner’s manual of Memory
viewer.
◆
Power Management
The Power management function reduces power
consumption and maintains the lamp life (p.52).
◆ Lamp Control
Brightness of the projection lamp can be selected
(pp.28, 53).
◆ Input Search Function
Input signal can be searched automatically. (p.51)
◆ Quick Termination
The AC power cord can be unplugged immediately
after turning off the projector without waiting for the
termination of the cooling fan rotation (p.23).
◆ Logo Function
The Logo function allows you to customize the screen
logo (pp.49–50). You can capture an image for the
screen logo and use it for the starting-up display or
between presentations.
✔Notes:
• The On-Screen Menu and figures in this manual may differ slightly from the product.
• The contents of this manual are subject to change without notice.
ꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
To the Owner
Safety Precaution
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPLIANCE
TO RAIN OR MOISTURE
Before installing and operating this projector, read this
manual thoroughly.
This projector provides many convenient features and
functions. Operating the projector properly enables
you to manage those features and maintains it in good
condition for many years to come.
Improper operation may result in not only shortening the
product-life, but also malfunctions, fire hazard, or other
accidents.
If your projector seems to operate improperly, read this
manual again, check operations and cable connections
and try the solutions in the “Troubleshooting” section
in the back of this booklet. If the problem still persists,
contact the dealer where you purchased the projector or
the service center.
–This projector produces intense light from the projection
lens. Do not stare directly into the lens, otherwise eye
damage could result. Be especially careful that children
do not stare directly into the beam.
–Install the projector in a proper position. Otherwise it may
result in fire hazard.
–Allowing the proper amount of space on the top, sides,
and rear of the projector cabinet is critical for proper
air circulation and cooling of the unit. The dimension
shown here indicate the minimum space required.
If the projector is to be built into a compartment or
similarly enclosed, these minimum distances must be
maintained.
CAUTION
SIDE and TOP
REAR
RISK OF ELECTRIC SHOCK
DO NOT OPEN
0.7’(20 cm)
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR
BACK) NO USER-SERVICEABLE PARTS
INSIDE EXCEPT LAMP REPLACEMENT
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL
1.5’(50 cm)
3’(1 m)
1.5’(50 cm)
–Do not cover the ventilation slot on the projector. Heat
build-up can reduce the service life of your projector,
and can also be dangerous.
–If the projector is unused for an extended time, unplug
the projector from the power outlet.
THIS SYMBOL INDICATES THAT DANGEROUS
VOLTAGE CONSTITUTING A RISK OF ELECTRIC
SHOCK IS PRESENT WITHIN THIS UNIT.
THIS SYMBOL INDICATES THAT THERE ARE
IMPORTANT OPERATING AND MAINTENANCE
INSTRUCTIONS IN THE OWNER'S MANUAL
WITH THIS UNIT.
CAUTION
DO NOT SET THE PROjECTOR IN GREASy, WET, OR
SMOKy CONDITIONS SUCH AS IN A KITCHEN TO PREVENT
A BREAKDOWN OR A DISASTER IF THE PROjECTOR
COMES IN CONTACT WITH OIL OR CHEMICALS, IT MAy
BECOME DETERIORATED
NOTE: This symbol and recycle system are applied
to EU countries only and not applied to the
countries in the other area of the world.
Your EIKI product is designed and
manufactured with high quality materials
and components which can be recycled
and reused.
CAUTION
Not for use in a computer room as defined in the
Standard for the Protection of Electronic Computer/Data
Processing Equipment, ANSI/NFPA 75.
This symbol means that electrical and
electronic equipment, at their end-of-life,
should be disposed of separately from
your household waste.
Ne peut être utilisé dans une salle d’ordinateurs telle
que définie dans la norme ANSI/NFPA 75 Standard
for Protection of Electronic Computer/Data Processing
Equipment.
Please dispose of this equipment at your local
community waste collection/recycling centre. In the
European Union there are separate collection systems
for used electrical and electronic products.
Please help us to conserve the environment we live in!
READ AND KEEP THIS OWNER'S MANUAL FOR
LATER USE
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Instructions
All the safety and operating instructions should be read
before the product is operated.
Do not install the projector near the ventilation duct of air-
conditioning equipment.
Read all of the instructions given here and retain them
for later use. Unplug this projector from AC power supply
before cleaning. Do not use liquid or aerosol cleaners.
Use a damp cloth for cleaning.
This projector should be operated only from the type
of power source indicated on the marking label. If you
are not sure of the type of power supplied, consult your
authorized dealer or local power company.
Follow all warnings and instructions marked on the
projector.
Do not overload wall outlets and extension cords as this
can result in fire or electric shock. Do not allow anything to
rest on the power cord. Do not locate this projector where
the cord may be damaged by persons walking on it.
For added protection to the projector during a lightning
storm, or when it is left unattended and unused for long
periods of time, unplug it from the wall outlet. This will
prevent damage due to lightning and power line surges.
Do not attempt to service this projector yourself as
opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all servicing to
qualified service personnel.
Do not expose this unit to rain or use near water... for
example, in a wet basement, near a swimming pool, etc...
Unplug this projector from wall outlet and refer servicing to
qualified service personnel under the following conditions:
a. When the power cord or plug is damaged or frayed.
b. If liquid has been spilled into the projector.
c. If the projector has been exposed to rain or water.
d. If the projector does not operate normally by following
the operating instructions. Adjust only those controls
that are covered by the operating instructions as
improper adjustment of other controls may result in
damage and will often require extensive work by a
qualified technician to restore the projector to normal
operation.
Do not use attachments not recommended by the
manufacturer as they may cause hazards.
Do not place this projector on an unstable cart, stand,
or table. The projector may fall, causing serious injury
to a child or adult, and serious damage to the projector.
Use only with a cart or stand recommended by the
manufacturer, or sold with the projector. Wall or shelf
mounting should follow the manufacturer’s instructions,
and should use a mounting kit approved by the
manufacturers.
e. If the projector has been dropped or the cabinet has
been damaged.
An appliance and cart combination
should be moved with care. Quick
stops, excessive force, and uneven
surfaces may cause the appliance
and cart combination to overturn.
f.When the projector exhibits a distinct change in
performance-this indicates a need for service.
When replacement parts are required, be sure the service
technician has used replacement parts specified by the
manufacturer that have the same characteristics as the
original part. Unauthorized substitutions may result in fire,
electric shock, or injury to persons.
Slots and openings in the back and bottom of the cabinet
are provided for ventilation, to ensure reliable operation of
the equipment and to protect it from overheating.
Upon completion of any service or repairs to this projector,
ask the service technician to perform routine safety
checks to determine that the projector is in safe operating
condition.
The openings should never be covered with cloth or other
materials, and the bottom opening should not be blocked
by placing the projector on a bed, sofa, rug, or other
similar surface. This projector should never be placed
near or over a radiator or heat register.
This projector should not be placed in a built-in installation
such as a book case unless proper ventilation is provided.
Never push objects of any kind into this projector through
cabinet slots as they may touch dangerous voltage points
or short out parts that could result in a fire or electric
shock. Never spill liquid of any kind on the projector.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Instructions
Moving the Projector
Air Circulation
Openings in the cabinet are provided for ventilation. To
ensure reliable operation of the product and to protect it
from overheating, these openings must not be blocked
or covered.
When moving the projector, close the Slide Shutter and
retract adjustable feet to prevent damage to the lens and
cabinet.
When the projector is not in use for an extended period,
put it into the supplied carrying case with the lens side up.
CAUTION
Hot air is exhausted from the exhaust vent. When using
or installing the projector, the following precautions
should be taken.
– Do not put any flammable object or spray can near the
projector, hot air is exhausted from the air vents.
– Keep the exhaust vent at least 3’ (1 m) away from any
objects.
– Do not touch a peripheral part of the exhaust vent,
especially screws and metallic parts. These areas will
become hot while the projector is being used.
– Do not put anything on the cabinet. Objects put on the
cabinet will not only get damaged but also may cause
fire hazard by heat.
CAUTION
The carrying case (supplied) is intended for protection
against dust and scratches on surface of the cabinet, and
it is not designed to protect an appliance from external
forces. Do not transport the projector by courier or any
other transport service with this case, otherwise the
projector can be damaged. When handling the projector,
do not drop, bump, subject it to strong forces, or put other
things on the cabinet.
CAUTION IN CARRyING OR TRANSPORTING
THE PROjECTOR
Cooling fans are provided to cool down the projector.
The fans’ running speed is changed according to the
temperature inside the projector.
– Do not drop or bump the projector, otherwise damages
or malfunctions may result.
–When carrying the projector, use a suitable carrying case.
–Do not transport the projector by courier or any other
transport service in an unsuitable transport case. This
may cause damage to the projector. For information
about transporting the projector by courier or any other
transport service, consult your dealer.
–Do not put the projector in a case before the projector is
cooled enough.
Air Intake Vent
Exhaust Vent
(Hot air exhaust)
Air Intake Vent
Air Intake
Vent
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Instructions
Installing the Projector in Proper Directions
Use the projector properly in specified positions. Improper positioning may reduce the lamp life and result in severe
accident or fire hazard.
This projector can project the picture upward, downward, or backward, perpendicular to the plane of the screen as
shown in the figure below.
50º
50º
40º
40º
Fan Control
"Max"
Bottom
Downward
(Usual)
Front
Upward
Bottom
Upward
Front
Downward
180º
0º
Fan Control
"Normal"
Be sure to set the Fan control in MAX in the setting menu when
the projector is inclined between +40 degrees to +140 degrees
to the horizontal plane (p.56).
Positioning Precautions
Avoid positioning the projector as described below when installing.
10˚
Do not tilt the projector more than 10 degrees from side to side.
10˚
Do not put the projector on either side to project an image.
10˚
10˚
In upward projection, do not tilt the projector over 10 degrees right and left.
In downward projection, do not tilt the projector over 10 degrees right and left.
10˚
10˚
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Compliance
Federal Communications Commission Notice
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
energy, and if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help.
Use of shielded cable is required to comply with class B limits in Subpart B of Part 15 of FCC Rules.
Do not make any changes or modifications to the equipment unless otherwise specified in the instructions. If
such changes or modifications should be made, you could be required to stop operation of the equipment.
Model Number
Trade Name
Responsible party
Address
: LC-WB40N
: EIKI
: EIKI International,Inc.
: 30251 Esperanza Santa Margaria CA 92688-2123
: 800-242-3454 (949-457-0200)
Telephone No.
AC Power Cord Requirement
The AC Power Cord supplied with this projector meets the requirement for use in the country you purchased it.
AC Power Cord for the United States and Canada:
AC Power Cord used in the United States and Canada is listed by the Underwriters
Laboratories (UL) and certified by the Canadian Standard Association (CSA).
AC Power Cord has a grounding-type AC line plug. This is a safety feature to be sure that the
plug will fit into the power outlet. Do not try to defeat this safety feature. Should you be unable
to insert the plug into the outlet, contact your electrician.
GROUND
AC Power Cord for the United Kingdom:
This cord is already fitted with a moulded plug incorporating a fuse, the value of which is indicated on the pin
face of the plug. Should the fuse need to be replaced, an ASTA approved BS 1362 fuse must be used of the
ASA
same rating, marked thus . If the fuse cover is detachable, never use the plug with the cover omitted. If a
replacement fuse cover is required, ensure it is of the same colour as that visible on the pin face of the plug
(i.e. red or orange). Fuse covers are available from the Parts Department indicated in your User Instructions.
If the plug supplied is not suitable for your socket outlet, it should be cut off and destroyed.
The end of the flexible cord should be suitably prepared and the correct plug fitted.
WARNING : A PLUG WITH BARED FLEXIBLE CORD IS HAZARDOUS IF ENGAGED IN A LIVE SOCKET
OUTLET
The Wires in this mains lead are coloured in accordance with the following code:
Green-and-yellow Earth
Blue . . . . . . . . . . . Neutral
Brown . . . . . . . . . Live
As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings
identifying the terminals in your plug proceed as follows:
The wire which is coloured green-and-yellow must be connected to the terminal in the plug which is marked by
the letter E or by the safety earth symbol or coloured green or green-and-yellow.
The wire which is coloured blue must be connected to the terminal which is marked with the letter N or
coloured black.
The wire which is coloured brown must be connected to the terminal which is marked with the letter L or
coloured red.
WARNING: THIS APPARATUS MUST BE EARTHED
THE SOCKET-OUTLET SHOULD BE INSTALLED NEAR THE EQUIPMENT AND EASILy ACCESSIBLE
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Part Names and Functions
Front
q Alarm Speaker
w Infrared Remote Receiver
e WIRELESS Indicator
r Focus Lever
t Projection Lens
y Zoom Ring
u Slide Shutter
CAUTION
Do not turn on a projector with slide
shutter closed. High temperature from
light beam may damage lens cap and
result in fire hazard.
q
e
r t y u
i
o
w
i Top Controls and Indicators
o Air Intake Vent
Back
! Exhaust vent
!
CAUTION
Hot air is exhausted from the exhaust
vents. Do not put heat-sensitive objects
near this side.
! Speaker
! Air Intake Vent (back and bottom)
! Terminals and Connectors
! Power Cord Connector
! SD Card Slot
!
!
!
!
! !
✽
! LAN Connection Terminal
! Lamp Cover
Bottom
!
! Filter
!
!
! Battery Cover
@ Adjustable Feet
✔
Note:
e WIRELESS Indicator and !
LAN Connection Terminal are for
the Network function. Refer to the
owner’s manual “Network Set-up and
Operation”.
!
✽ Kensington Security Slot
This slot is for a Kensington lock used to deter
theft of the projector.
*
Kensington is a registered trademark of ACCO Brands
Corporation.
@
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Part Names and Functions
Rear Terminal
q
w
e
r
t
y
u
KB3BC
SD
i
o
!
!
!
!
!
!
q R/C jACK
When using the wired remote control, connect
i ALARM buttons
Use these buttons when setting up the Alarm
function (pp.58–59).
the wired remote control to this jack with a remote
control cable .
o VIDEO IN
w USB (Series B)
In order to operate the computer with the remote
Connect the composite video output signal to this
jack (p.20).
control and use the PAGE ed buttons on the
remote control during a presentation, connect the
USB port of the computer to the USB terminal with
a USB cable (not supplied) (pp.13, 19).
! AUDIO IN
Connect the audio output signal from video
equipment connected to o or ! to this jack. For a
mono audio signal (a single audio jack), connect it
to the L (MONO) jack (p.20).
e SERVICE PORT
This jack is used to service the projector.
! COMPUTER/COMPONENT AUDIO IN
r COMPUTER IN ꢀ/COMPONENT IN
Connect the audio output (stereo) signal from a
computer or video equipment connected to r or y
to this jack (pp.19, 21).
Connect the computer or component video (or RGB
Scart) output signal to this terminal (pp.19, 21).
Use the supplied VGA cable or a Component-VGA
cable commercially available.
! AUDIO OUT (VARIABLE)
Connect an external audio amplifier to this jack
(pp.19–21).
This terminal outputs sound from AUDIO IN terminal
(! or !).
t MONITOR OUT
This terminal can be used to output the incoming
RGB analog signal from COMPUTER IN 1 and
COMPUTER IN 2/COMPONENT IN terminal to the
other monitor (p.19).
! S-VIDEO IN
Connect the S-VIDEO output signal from video
equipment to this jack (p.20).
y COMPUTER IN 1/DVI-I
Connect computer output (Digital/Analog DVI-I
type) to this terminal (p.19).
! SD Card Indicator
Display the status of SD card.When inserting SD
Card, the indicator lights, and when removing SD
Card, the indicator turns off.
u LAN Connection Terminal
Connect the LAN cable (refer to the owner’s manual
“Network Set-up and Operation”).
! SD Card Slot
Insert the SD card memory (not supplied) for
Memory viewer operation(refer to the owner’s
manual of Memory viewer).
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Part Names and Functions
Top Control
q
w
i
e
r
o
!
!
t
y
u
i WARNING indicator
q ALARM indicator
–Lights red when the projector detects an abnormal
condition.
Blinks red when informing the setting or battery
status (pp.58–59).
–Blinks red when the internal temperature of the
projector exceeds the operating range (pp.62, 71).
w LAMP REPLACE indicator
Lights yellow when the projection lamp reaches its
end of life (pp.65, 71).
o POWER indicator
–Lights red when the projector is in stand-by mode.
–Lights green during operations.
–Blinks green in the Power management mode
(p.52).
e ON/STAND–By button
Turn the projector on or off (pp.22–23).
r INPUT button
! AUTO SETUP/CANCEL button
Select an input source (pp.30–31, 40–41).
t KEySTONE button
–Correct vertical keystone distortion and adjust
computer display parameters such as Fine sync.,
Total dots, and Picture position (pp.26, 47).
–Display the image in SD card or return to the
menu bar in Memory Viewer menu.
Correct keystone distortion (pp.26, 48).
y POINT ed7 8 (VOLUME +/–) buttons
–Select an item or adjust the value in the
On-Screen Menu (p.24).
–Pan the image in the Digital zoom + mode (p.39).
–Adjust the volume level (Point 7 8 buttons) (p.27).
Refer to the owner's manual of "Network Set-up
and Operation" and owner's manual of Memory
viewer.
! MENU button
u SELECT button
Open or close the On-Screen Menu (p.24).
–Execute the selected item (p.24).
–Expand or compress the image in the Digital zoom
mode (p.39).
1ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Part Names and Functions
q L-CLICK button
Act as the left mouse button for wireless mouse operation. (p.15)
Remote Control
w POWER ON/STAND-By button
Turn the projector on or off. (pp.22-23)
e WIRED REMOTE jack
Connect the remote control cable to this jack when using as a wired remote
control. Wireless remote control does not work when the remote control cable is
connected to the projector.
r SIGNAL EMISSION indicator
Lights red while the laser beam is being emitted from the laser light window or a
signal is being sent from the remote control to the projector.
q
t LASER LIGHT window
A laser beam is emitted from here (p.14).
y VIDEO button
Select the VIDEO input source. (p.40)
t
e
w
r
u COMPUTER button
Select the COMPUTER input source. (pp.30-31,41)
i AUTO PC button
Automatically adjust the computer image to its optimum setting. (pp.28,33,47)
o
KEySTONE button
Correct keystone distortion. (pp.26, 48)
y
u
+ / –
– Select an item or adjust the value in the On-Screen Menu. (p.24)
! Point ed 7 8 ( VOLUME
)
buttons
@
@
– Pan the image in the Digital zoom + mode. (p.39)
– Adjust the volume level. (Point 7 8 buttons) (p.27)
i
o
! MENU button
Open or close the On-Screen Menu. (p.24)
! FREEZE button
Freeze the picture on the screen. (p.28)
!LASER button
!
– Operate the Laser pointer function. Laser beam is emitted while pressing this
button within 1 minute. When using this laser pointer for more than 1 minute,
release the LASER button and press it again. (p.14)
– Display the Pointer on the screen. (p.14)
@
@
! PAGE ed buttons
Scroll back and forth the pages on the screen when giving a presentation. To use
these buttons, connect the projector and your computer with a USB cable. (pp.11,
19)
! LAMP CONTROL button
Select a lamp mode. (pp.28, 53)
@
@
@
!
! D ZOOM ed buttons
Zoom in and out the images. (pp.28, 39)
!
!
! RESET/ON/ALL-OFF switch
When using the remote control, set this switch to “ON.” Set it to “ALL OFF” for
power saving when it is not used. Slide this switch to "RESET" to initialize the
remote control code or switch Spotlight and Pointer to the Laser pointer function.
(pp.14-15)
!
!
!
! IMAGE button
Select the image mode. (pp.29,36,43)
!
!
!
@
@
MUTE button
Mute the sound. (p.27)
P-TIMER button
Operate the P-timer function. (p.29)
NO SHOW button
Temporarily turn off the image on the screen. (p.29)
@ R-CLICK button
Act as the right mouse button for wireless mouse operation. (p.15)
!
@ SELECT button
– Execute the selected item. (p.24)
– Expand or compress the image in Digital zoom mode. (p.39)
@ PRESENTATION POINTER button
Move a pointer of the projector or a pointer for wireless mouse operation. (pp.14-15)
@ AUTO SET/CANCEL button
To ensure safe operation, please
observe the following precautions:
– Correct vertical keystone distortion and adjust the PC display parameters. (pp.26,
47)
– Do not bend, drop, or expose the remote
control to moisture or heat.
– For cleaning, use a soft dry cloth. Do
not apply benzene, thinner, splay, or any
chemical material.
– Display the image in SD card or return to the menu bar in Memory Viewer menu.
Refer to the owner's manual of "Network Set-up and Operation" and owner's
manual of Memory viewer.
@ NETWORK button
Select the Network input or Memory viewer input. See owner's manual “Network
Set-up and Operation” and owner's manual of Memory viewer .
.
1ꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Part Names and Functions
Laser Pointer Function
This remote control emits a laser beam from the laser light window. Press the LASER button to activate the
laser pointer. The signal emission indicator lights red and the red laser beam is emitted. If the LASER button is
pressed for more than one minute or if it is released, the laser light goes off.
The laser emitted is a Class II laser. Do not look into the laser light window or point the laser beam at yourself or
other people. The following is the caution label for the laser beam.
CAUTION: Use of controls, adjustments or performance of procedures other than those specified herein may
result in hazardous radiation exposure. Never look directly into the laser light window while a laser
is emitted, otherwise eye damage may result.
The caution label is put on the remote control.
Signal Emission Indicator
Laser Light Window
Pointer Function
You can move the Spotlight or Pointer of the projector with the remote control to emphasize a part of the
projected image.
Press and hold the MENU and NO SHOW buttons for
more than 10 seconds to activate the Pointer function.
(The Laser pointer has switched to the Pointer function.)
button
1
PRESENTATION POINTER
Press the LASER button on the remote control pointing
toward the projector. The Spotlight or Pointer is
displayed on the screen with the LASER button lighting
ꢀ
MENU button
NO SHOW button
green. Then move the Spotlight or Pointer with the
PRESENTATION POINTER button. If the LASER button
does not light green and continues to emit a laser beam,
try the abovementioned procedure until the LASER
button lights green.
Press and hold the MENU
and NO SHOW buttons for
more than 10 seconds.
To clear the Spotlight or Pointer out the screen, press
the LASER button pointing toward the projector and see
if the LASER button lighting is turned off.
ꢁ
To switch to the Laser pointer again, press and hold
the NO SHOW and MENU buttons for more than 10
seconds or slide the RESET/ON/ALL-OFF switch to
“RESET” and then to “ON”.
PRESENTATION POINTER
button
When you reset the Pointer function, the remote control
code will be reset, as well.
LASER button
After the Laser pointer has
switched to the Pointer, use
the LASER button as the
Pointer function ON-OFF
switch. Press the LASER
button pointing toward the
projector and see if it lights
green.
Spotlight
Pointer
✔Note:
• You can choose the size of Spotlight (Large/Middle/
Small) and the pattern of Pointer (Arrow/Finger/Dot) in
the Setting Menu. See “Pointer” on page 53.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Part Names and Functions
Wireless Mouse Operation
The remote control can be used as a wireless mouse for your computer.
Before operating the wireless mouse, connect
your computer and the projector with a USB
1
cable (not supplied). See “Connecting to a
Computer” on page 19. When the Pointer
function is used, the wireless mouse is not
available.
PRESENTATION POINTER
button
Move the pointer on the screen
with this button.
R-CLICK button
When a USB cable is connected to the
computer and the projector, turn on the
projector first, then the computer. If you turn
on the computer first, the wireless mouse
function may not operate correctly.
ꢀ
Acts as right (click) mouse
button while the projector and a
computer are connected with a
USB cable.
L-CLICK button
Acts as left (click) mouse
button while the projector
and a computer are
connected with a USB
cable.
Remote Control Code
The eight different remote control codes (Code 1–Code 8) are assigned to this projector. Switching the remote
control codes prevents interference from other remote controls when several projectors or video equipment
next to each other are operated at the same time. Change the remote control code for the projector first before
changing that for the remote control. See “Remote control” in the Setting Menu on page 53.
Press and hold the MENU and IMAGE buttons for
1
more than five seconds to switch between the codes.
The code switches sequentially for one pressing the
IMAGE button. See the list below.
While pressing the MENU
button, press the IMAGE
button number of times
corresponding to the remote
control code.
To initialize the remote control code, slide the RESET/
ON/ALL-OFF switch to “RESET,” and then to “ON.”
The initial code is set to Code 1.
ꢀ
Number of Times
Pressing IMAGE
Button
Remote Control Code
Code 1
Code ꢀ
Code ꢁ
Code 4
Code 5
Code 6
Code 7
Code 8
1
ꢀ
ꢁ
4
5
6
7
8
MENU button
IMAGE button
RESET/ON/ALL-OFF
switch
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Part Names and Functions
Remote Control Battery Installation
Open the battery
compartment lid.
Install new batteries
into the compartment.
Replace the
compartment lid.
1
ꢀ
ꢁ
Press the lid
downward and slide it.
Two AAA size
batteries
For correct polarity
(+ and –), be sure
battery terminals are
in contact with pins in
compartment.
To insure safe operation, please observe the following precautions :
● Use two (2) AAA or LR03 type alkaline batteries.
● Always replace batteries in sets.
● Do not use a new battery with a used battery.
● Avoid contact with water or liquid.
● Do not expose the remote control to moisture or heat.
● Do not drop the remote control.
● If the battery has leaked on the remote control, carefully wipe the case clean and install new batteries.
● Risk of an explosion if battery is replaced by an incorrect type.
● Dispose of used batteries according to the instructions.
Remote Control Operating Range
16.4'
(5 m)
Point the remote control toward the projector (Infrared
Remote Receiver) when pressing the buttons. Maximum
operating range for the remote control is about 16.4'(5 m)
and 60 degrees in front of the projector.
30°
30°
Remote control
Adjustable Feet
Projection angle can be adjusted up to 8.9 degrees with the
adjustable feet.
Lift the front of the projector and pull the feet lock latches on
both side of the projector upward.
Release the feet lock latches to lock the adjustable feet and
rotate the adjustable feet to a proper height, and tilt.
Keystone distortion can be adjusted automatically with the
Auto setup function or manually by using the remote control
or the menu operation (see pages 26, 47-48).
Adjustable Feet
Feet Lock Latches
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Positioning the Projector
For projector positioning, see the figures below. The projector should be set perpendicularly to the plane of the
screen.
✔Notes:
• The brightness in the room has a great influence on picture quality. It is recommended to limit ambient
lighting in order to obtain the best image.
• All measurements are approximate and may vary from the actual sizes.
39.7'(12.1m)
A : B = 49 : 1
(Inch Diagonal)
25.2'(7.7m)
300"(tele )
300"(wide)
16.7'(5.1m)
12.5'(3.8m)
8.2'(2.5m)
Max. Zoom
Min. Zoom
200"
127ꢀ
189ꢀ
150"
3.3'(1.0m)
A
100"
63ꢀ
95ꢀ
40"
(Center)
SQ@
B
Screen Size
(W x H) mm
40”
100”
150”
200”
300”
862 x 538
5.2'(1.6m)
3.3'(1.0m)
2154 x 1346
13.1'(4.0m)
8.2'(2.5m)
3231 x 2019
19.7'(6.0m)
12.5'(3.8m)
4308 x 2692
26.86(8.1m)
16.7'(5.1m)
6462 x 4039
39.7'(12.1m)
25.2'(7.7m)
16 : 10 aspect ratio
Zoom (min)
Zoom (max)
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Connecting the AC Power Cord
This projector uses nominal input voltages of 100-120 V or
200–240 V AC and it automatically selects the correct input
voltage. It is designed to work with single-phase power
systems having a grounded neutral conductor. To reduce
the risk of electrical shock, do not plug into any other type of
power system.
If you are not sure of the type of power being supplied,
consult your authorized dealer or service station.
Connect the projector with all peripheral equipment before
turning the projector on.
Connect the AC power cord (supplied) to the
projector.
The AC outlet must be near this equipment and
must be easily accessible.
CAUTION
For safety, unplug the AC power cord when the projector
is not in use. When the projector is connected to an
outlet with the AC power cord, it is in stand-by mode and
consumes a little electric power.
NOTE ON THE POWER CORD
AC power cord must meet requirement of the country where you use the projector.
Confirm the AC plug type with the chart below and proper AC power cord must be used.
If supplied AC power cord does not match your AC outlet, contact your sales dealer.
Projector side
AC outlet side
For Continental Europe
For the U K
For the U S A and Canada
Ground
To power cord
connector on your
projector.
To the AC outlet.
(ꢀ00 - ꢀ40 V AC)
To the AC outlet.
(ꢀ00 - ꢀ40 V AC)
To the AC outlet.
(1ꢀ0 V AC)
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Connecting to a Computer
Cables used for connection
• VGA Cable (Mini D-sub 15 pin) *
• DVI-I/VGA Cable
• DVI Cable
• USB Cable
• Audio Cables
(*One cable is supplied; other cables are not supplied with the projector.)
Monitor
Output
Monitor
Input
Monitor Monitor
Output Output
Audio Output USB port
External Audio Equipment
Audio Input
USB cable
VGA cable VGA cable DVI-I/VGA
cable
DVI
cable
Audio cable
(stereo)
COMPUTER IN 2/ MONITOR COMPUTER IN 1
COMPONENT OUT DVI-I
Audio cable
(stereo)
USB
AUDIO OUT
(stereo)
KB3BC
COMPUTER/
COMPONENT
AUDIO IN
✔Notes:
• Input sound to the COMPUTER/COMPONENT AUDIO IN
terminal when using the COMPUTER IN 1/DVI-I and the
COMPUTER IN 2/ COMPONENT IN terminal as input.
• When the AUDIO OUT is plugged-in, the projector's built-in
speaker is not available.
Unplug the power cords of both the
projector and external equipment
from the AC outlet before connecting
cables.
• USB cable connection is needed when operating the computer
with the remote control or using the PAGE ed buttons on the
remote control.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Connecting to Video Equipment
Cables used for connection
• Video and Audio Cable (RCA x 3)
• S-VIDEO Cable
• Audio Cable
(Cables are not supplied with the projector. )
Composite Video and Audio Output
S-video Output
(R) (L)
(Video)
External Audio Equipment
S-video cable
Video and audio cable
Audio Input
S-VIDEO
AUDIO IN VIDEO
Audio cable
(stereo)
KB3BC
AUDIO OUT
(stereo)
✔
Notes:
• When the AUDIO OUT is plugged-in, the projector's
built-in speaker is not available.
• The S-VIDEO jack connection overrides the VIDEO
jack connection when selecting AUTO in the Input Menu
(p.40).
Unplug the power cords of
both the projector and external
equipment from the AC outlet
before connecting cables.
ꢀ0
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Connecting to Component Video Equipment
Cables used for connection
• Audio Cables
• Scart-VGA Cable
• Component Cable
• Component-VGA Cable
(Cabels are not supplied with this projector.)
RGB Scart 21-
pin Output
Component Video Output
(Y, Pb/Cb, Pr/Cr)
Audio Output
Component
cable
External Audio Equipment
Scart-VGA
cable
Audio cable
(stereo)
Component-VGA
cable
Audio Input
COMPUTER/ COMPONENT
AUDIO IN
COMPUTER IN 2/COMPONENT IN
Audio cable
(stereo)
KB3BC
AUDIO OUT
(stereo)
✔Notes:
• When the AUDIO OUT is plugged-in, the projector's
built-in speaker is not available.
Unplug the power cords of
• See page 77 for ordering optional cables.
• RGB Scart signal cannot be output from the MONITOR
OUT terminal.
both the projector and external
equipment from the AC outlet
before connecting cables.
ꢀ1
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operation
Turning On the Projector
Complete peripheral connections (with a computer,
VCR, etc.) before turning on the projector.
1
ꢀ
16
Connect the projector’s AC power cord into an AC
outlet. The POWER indicator lights red. Open the lens
cover with the Slide Shutter. (see pages 10,64).
Press the POWER ON/SYAND-BY button on the top
control or on the remote control. The POWER indicator
lights green and the cooling fans start to operate. The
preparation display appears on the screen and the count
down starts.
ꢁ
4
The preparation display will disappear
after 30 seconds.
Selected Input Source and Lamp Control
After the countdown, the input source that was selected
the last time and the lamp control status icon (see page
53) appear on the screen.
Lamp control status
(See page 51 for Lamp control status.)
If the projector is locked with a PIN code, PIN code
input dialog box will appear. Enter the PIN code as
instructed below.
✔Note:
• The Filter warning and Lamp
replacement icons may appear on the
screen depending on the usage state of
the projector.
Enter a PIN code
Use the Point ed buttons to enter a number. Press the Point
8 button to fix the number and move the red frame pointer
to the next box. The number changes to “✳.” If you fixed an
incorrect number, use the Point 7 button to move the pointer
to the number you want to correct, and then enter the correct
number.
PIN Code Input Dialog Box
Repeat this step to complete entering a four-digit number.
After entering the four-digit number, move the pointer to “Set.”
Press the SELECT button so that you can start to operate the
projector.
After the OK icon disappears,
you can operate the projector.
If you entered an incorrect PIN code, “PIN code” and the
number (✳✳✳✳) will turn red for a moment. Enter the correct
PIN code all over again.
✔Notes:
• When the Logo select function is set to
“Off,” the logo will not be shown on the
screen (p.50).
• When the “Countdown off” or “Off” is
selected in the Display function, the
countdown will not be shown on the
screen (p.48).
What is PIN code?
PIN (Personal Identification Number) code is a security
code that allows the person who knows it to operate the
projector. Setting a PIN code prevents unauthorized use of
the projector.
A PIN code consists of a four-digit number. Refer to the PIN
code lock function in the Setting Menu on pages 54–55 for
locking operation of the projector with your PIN code.
• During the countdown period, all
operations are invalid.
• If the correct PIN code number is not
entered within three minutes after the
PIN code dialog box appeared, the
projector will be turned off automatically.
• The “1234” is set as the initial PIN code
at the factory.
• When the Input Search function is set to
“On2”, the input signal will be searched
automatically (p.51)
CAUTION ON HANDLING PIN CODE
If you forget your PIN code, the projector can no
longer be started. Take a special care in setting
a new PIN code; write down the number in a
column on page 80 of this manual and keep
it at hand. Should the PIN code be missing or
forgotten, consult your dealer or service center.
ꢀꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operation
Turning Off the Projector
Press the POWER ON/STAND-BY button on the top
control or on the remote control, and “Power off?”
appears on the screen.
1
Press the POWER ON/STAND-BY button again to turn
off the projector. The POWER indicator starts to blink
ꢀ
red, and the cooling fans keep running. (You can select
the level of fans’ quietness and speed. See “Fan” on
page 56.) At this time, you can unplug the AC power
cord even if the fans are still running.
“Power off?” disappears after 4 seconds.
When the projector has cooled down enough, the
POWER indicator stops blinking and you can turn on
the projector.
ꢁ
TO MAINTAIN THE LIFE OF THE LAMP, ONCE
YOU TURN THE PROJECTOR ON, WAIT AT
LEAST FIVE MINUTES BEFORE TURNING IT
OFF.
DO NOT OPERATE THE PROJECTOR
CONTINUOUSLY WITHOUT REST.
CONTINUOUS USE MAY RESULT IN
SHORTENING THE LAMP LIFE. TURN OFF THE
PROJECTOR AND LET STAND FOR ABOUT AN
HOUR IN EVERY 24 HOURS.
✔Notes:
• When the On start function is set to “On,” the projector
will be turned on automatically by connecting the AC
power cord to an AC outlet (p.53).
• The running speed of cooling fans is changed according
to the temperature inside the projector.
• Do not put the projector in a case before the projector is
cooled enough.
• If the WARNING indicator blinks or lights red, see
“Warning Indicators” on page 62.
• While the POWER indicator is blinking, the lamp is
being cooled down and the projector cannot be turned
on. Wait until the POWER indicator stops blinking to turn
on the projector again.
• The fan rotation will terminate directly if the AC power
cord is unplugged immediately after the projector is
turned off.
• The projector can be turned on after the POWER
indicator turns red. The waiting time to restart will be
shortened when the normal power-off processing for fan
cooling is completed, compared with the time the AC
power cord is immediately unplugged after the power-
off.
ꢀꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operation
How to Operate the On-Screen Menu
The projector can be adjusted or set via the On-Screen
Menu. For each adjustment and setting procedure, refer to
the respective sections in this manual.
Top Control
MENU button
Press the MENU button on the top control or the
remote control to display the On-Screen Menu.
1
POINT buttons
Use the Point 7 8 buttons to select a Menu icon. Use
the Point ed buttons to select an item in the selected
menu.
ꢀ
Press the SELECT button to show the item data. Use
the Point 7 8 buttons to adjust the values.
ꢁ
SELECT button
To close the On-Screen Menu, press the MENU button
again.
Remote Control
POINT buttons
✔Note:
• The selected item is not active until the SELECT button
is pressed.
SELECT button
MENU button
On-Screen Menu
Menu icon
Menu bar
Pointer
(red frame)
Pointer (red frame)
Press the Point ed buttons
to move the pointer.
Item
SELECT
button
Item data
Press the Point 7 8
buttons to adjust the
value.
Quit
Exit this menu.
ꢀ4
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operation
Menu Bar
For detailed functions of each menu, see “Menu Tree” on pages 71–72.
For computer source
Screen Menu
Guide Window
PC System Menu Image Select Menu
Show the selected Used to select Used to select an
computer system image mode among
Setting Menu
Wireless Menu
Used to adjust size
Used to set
See owner’s manual
“Network Set-up and
Operation”.
Menu of the On-
Screen Menu.
of the image [Normal/
the projector’s
(p.32).
Dynamic, Standard, Real, True/Full/Custom/Digital operating
Blackboard(Green), and zoom +/–] (pp.38–39). configurations
Image 1–4 (p.36).
(pp.47-57).
Image Adjust Menu
Sound Menu
Wired Menu
Input Menu
PC Adjust Menu
Used to adjust computer image Used to adjust
See owner’s manual
“Network Set-up and
Operation”.
Used to select an
input source either
Computer or Video.
(pp.30-31).
Used to adjust
[Contrast/Brightness/ Color
temp./White balance (R/G/B)/
the volume or
parameters to match
with input signal format
(pp.33–35).
mute the sound
Sharpness/Gamma] (pp.37–38). (p.27).
For video source
Input Menu
Image Select Menu
Screen Menu
Used to select an input Used to select an image mode
Used to set size
source either Video or
Computer (pp.40, 41).
among Dynamic, Standard,
Cinema, Blackboard(Green) and
Image 1–4 (p.43).
of image[Normal/
Zoom/Natural wide/
Custom](p.46,47).
Same function as
AV System Menu
Image Adjust Menu
Same function as
computer menu.
menu for computer
source.
Used to select
Used to adjust picture image
[Contrast/Brightness/Color/Tint/
system of selected
video source (p.42). Color temp./White balance (R/
G/B)/Sharpness/Gamma/ Noise
reduction/Progressive] (pp.44–45).
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operation
Zoom and Focus Adjustment
Rotate the Zoom Ring to zoom in and out.
Rotate the Focus Lever to adjust the focus of the image.
Zoom Ring
Focus Lever
Auto Setup Function
Auto setup function is provided to automatically correct
Keystone distortion according to the projector’s tilt and adjust
the computer display parameters (Fine sync, Total dots, and
Picture position) by just pressing the AUTO SETUP/CANCEL
button on the top control or the AUTO SET/CANCEL button
on the remote control. The operational setup for the Auto
setup can be changed in the Setting menu. Refer to page 47
for the setting of the Auto setup function.
Top Control
AUTO SETUP/CANCEL
button
POINT ed buttons
✔Notes:
• Auto Keystone corrects vertical distortion only; it does not
correct horizontal distortion.
• Auto Keystone cannot work when Ceiling feature is set to
“On” in the Setting menu (p.51).
Remote Control
• Perfect correction of the image distortion cannot be
ensured with the Auto setup function. If the distortion
cannot be corrected properly by pressing the AUTO
SETUP/CANCEL or AUTO SET/CANCEL button, adjust
manually by pressing the KEYSTONE button on the
remote control or selecting Keystone in the Setting menu
(p.48).
KEySTONE button
AUTO SET/CANCEL
button
• Fine sync, Total dots, Horizontal and Vertical position of
some computers cannot be fully adjusted with the Auto
PC Adjustment function. When the image is not provided
properly with this operation, manual adjustments are
required (pp.34–35).
POINT ed buttons
Keystone Correction
If a projected picture still has keystone distortion after
pressing the AUTO SETUP/CANCEL button on the top
control or the AUTO SET/CANCEL button on the remote
control, correct the image manually as follows:
• The white arrows indicate that there is no
correction.
• A red arrow indicates the direction of correction.
• An arrow disappears at the maximum correction.
• If you press the KEYSTONE button on the remote
control once more while the keystone dialog box is
being displayed, the keystone adjustment will be
canceled.
Press the KEYSTONE button on the remote control. The
Keystone dialog box appears. Use the Point ed buttons to
correct keystone distortion. The keystone adjustment can be
stored (see page 48).
Reduce the upper width
with the Point e button.
Reduce the lower width
with the Point d button.
• The adjustable range is limited depending on the
input signal.
ꢀ6
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operation
Sound Adjustment
Top Control
Direct Operation
VOLUME+/-
Volume
buttons
Press the VOLUME+/– buttons on the top control or on the
remote control to adjust the volume. The volume dialog box
appears on the screen for a few seconds.
Remote Control
Mute
VOL- button
VOL+ button
Press the MUTE button on the remote control to temporarily
turn off the sound. To turn the sound back on, press the
MUTE button again or press the VOLUME +/– buttons. The
Mute function is also effective for the AUDIO OUT jack.
Menu Operation
Press the MENU button to display the On-Screen
Menu. Use the Point 7 8 buttons to move the red
frame pointer to the Sound Menu icon.
1
MUTE button
Volume Dialog Box
Use the Point ed buttons to move the red frame
pointer to the desired item, and then press the SELECT
button.
ꢀ
Approximate level
of the volume.
Volume
Press the Point 8 button to turn up the volume; press the
Point 7 button to turn down the volume.
Press the MUTE button to set the Mute function On
or Off. The dialog box disappears after 4 seconds.
Mute
Sound Menu
Press the Point 7 8 buttons to switch the mute function On/
Off. When the sound is turned off, “On” is displayed. Press
the Point 7 8 buttons again to turn the sound back on.
Sound Menu icon
Approximate level of the volume.
Exit the Sound Menu.
ꢀ7
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operation
Remote Control Operation
Using the remote control for some frequently used operations is advisable. Just pressing one of the buttons
enables you to make the desired operation quickly without calling up the On-Screen Menu.
COMPUTER/VIDEO/NETWORK button
Remote Control
Press the COMPUTER, VIDEO, or NETWORK button on
the remote control to select the input source. See pages 30-
31, 40-41 for details.
Refer to the owner’s manual “Network Set-up and
Operation” for details about the network input.
VIDEO button
COMPUTER
button
NETWORK
button
AUTO PC
button
FREEZE button
Press the FREEZE button on the remote control to freeze
the picture on the screen. To cancel the Freeze function,
press the FREEZE button again or press any other button.
POINT ed buttons
FREEZE button
AUTO PC button
D ZOOM
buttons
NO SHOW button
P-TIMER button
Press the AUTO PC button on the remote control to operate
the Auto PC Adj. function. The computer screen adjustment
can be done easily by pressing this button. See page 33 for
details.
LAMP
CONTROL
button
IMAGE button
D ZOOM buttons
Press the D.ZOOM buttons on the remote control to enter to
the Digital zoom +/– mode. See page 39 for details.
✔Note:
• See the next page for the description of other
buttons.
LAMP CONTROL button
Press the LAMP CONTROL button on the remote control
to select the lamp mode for changing the brightness on the
screen.
Auto........... The brightness according to the input signal
(between High and Eco mode).
High........... Brighter than the Normal mode.
Normal....... Normal brightness
Eco ............ Lower brightness reduces the lamp power
consumption and extends the lamp life.
ꢀ8
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operation
NO SHOW button
Press the NO SHOW button on the remote control to black out
the image. To restore to normal, press the NO SHOW button
again or press any other button. When a projected image is
captured and set as “User” in the Logo selection (see page 49),
the screen changes each time you press the NO SHOW button
as follows.
• • • • •
black out ➜ the captured image ➜ normal ➜
“No show” disappears after 4 seconds.
P-TIMER button
Press the P-TIMER button on the remote control. The P-Timer
display “00:00” appears on the screen and the countdown
starts (00:00–59:59).
To stop the countdown, press the P-TIMER button. To cancel
the P-Timer function, press the P-TIMER button again.
P-Timer display
IMAGE button
Press the IMAGE button on the remote control to select a
desired image mode of the screen. See pages 36, 43 for
details.
NO SHOW button
P-TIMER button
IMAGE button
✔Note:
• See the previous page for the description of
other buttons.
ꢀ9
Download from Www.Somanuals.com. All Manuals Search And Download.
Computer Input
Input Source Selection (RGB: Computer 1 (Analog)/Computer ꢀ )
INPUT button
Direct Operation
Top Control
Computer 1 (Analog)
Computer 1 (Digital)
Computer ꢀ
Video
Choose either Computer 1 (Analog) or Computer 2 by
pressing the INPUT button on the top control or press the
COMPUTER button on the remote control.
Before using these buttons, correct input source should be
selected through Menu operation as described below.
Wired
Wireless
Remote Control
COMPUTER button
Computer 1 (Analog)
Computer 1 (Digital)
Computer ꢀ
Menu Operation
Input Menu icon
Press the MENU button to display the On-Screen
Menu. Use the Point 7 8 buttons to move the red
frame pointer to the Input Menu icon.
Input Menu
1
Move the pointer (red
arrow) to Computer 1
(Analog) and press the
SELECT button.
Use the Point ed buttons to move the red arrow
pointer to either Computer 1 (Analog) or Computer 2,
and then press the SELECT button.
ꢀ
When selecting Computer 1 (Analog), RGB input
source will be selected directly.
ꢁ
Wireless
When selecting Computer 2, the Source Select Menu
appears. Move the pointer to RGB and then press the
SELECT button.
Input Menu icon
Input Menu
Move the pointer (red
arrow) to Computer 2
and press the SELECT
button.
✔Notes:
• Wired and Wireless are for the Network function. See
owner’s manual “Network Set-up and Operation”.
• When the Input Search function is set to “On1” or “On2”,
the input signal will be searched automatically (p.51).
Computer
ꢀ
Move the pointer
(red arrow) to RGB.
ꢁ0
Download from Www.Somanuals.com. All Manuals Search And Download.
Computer Input
Input Source Selection (RGB(PC digital), RGB(AV HDCP))
Direct Operation
Top Control
INPUT button
Choose Computer 1(Digital) by pressing the INPUT button
on the top control or press the COMPUTER button on the
remote control.
Before using these buttons, correct input source should be
selected through Menu operation as described below.
Computer 1 (Analog)
Computer 1 (Digital)
Computer ꢀ
Video
Wired
Wireless
Remote Control
COMPUTER button
Computer 1 (Analog)
Computer 1 (Digital)
Computer ꢀ
Menu Operation
Press the MENU button to display the On-Screen
Menu. Use the Point 7 8 buttons to move the red
frame pointer to the Input Menu icon.
1
Input Menu icon
Use the Point ed buttons to move the red arrow
pointer to Computer 1 (Digital), and then press the
SELECT button.
ꢀ
Input Menu
After the Source Select Menu appeared for Computer
1 (Digital), move the pointer to RGB (PC digital) or
RGB (AV HDCP), and then press the SELECT button.
ꢁ
Move the pointer
(red arrow) to
Computer 1
(Digital) and press
the SELECT button.
✔Notes:
• HDCP (High-bandwidth Digital Content Protection) is
a system for protecting digital entertainment content
delivered by DVI (Digital Visual Interface) from being
copied. The specification of HDCP is decided and
controlled by Digital Content Protection, LLC. Should the
specification be changed, this projector may not display
the digital content protected by HDCP.
• Wired and Wireless are for the Network function. See
owner’s manual “Network Set-up and Operation” .
• When the Input Search function is set to “On1” or “On2”,
the input signal will be searched automatically (p.51).
Computer
1
Move the pointer to
the source that you
want to select and
press the SELECT
button.
ꢁ1
Download from Www.Somanuals.com. All Manuals Search And Download.
Computer Input
Computer System Selection
This projector automatically tunes to various types of computers based on VGA, SVGA, XGA, SXGA, WXGA,
or UXGA with its Multi-scan system and Auto PC Adjustment. If a computer is selected as a signal source, this
projector automatically detects the signal format and tunes to project a proper image without any additional
settings. (Signal formats provided in this projector are shown on pages 74-75.)
One of the following messages may appear when:
The projector cannot recognize the connected
signal conforming to the provided PC Systems.
The “Auto” is displayed on the System Menu
box and the Auto PC Adjustment function works
to display proper images. If the image is not
projected properly, a manual adjustment is
required (pp.34-35).
Auto
PC System Menu
The Auto PC Adjustment
function operates to adjust
the projector.
There is no signal input from the computer.
Check the connection between your computer
and the projector. (See “Troubleshooting” on
page 67.)
-----
The preset system is manually adjusted in the
PC Adjust Menu. The adjusted data can be
stored in Mode 1–5 (pp.34-35).
Mode 1
SVGA 1
PC Systems provided in this projector is chosen.
The projector chooses a proper system provided
in the projector and displays it.
*Mode 1 and SVGA 1 are examples.
PC System Menu
Selecting Computer System Manually
PC system can also be selected manually.
Press the MENU button to display the On-Screen
Menu. Use the Point 7 8 buttons to move the red
frame pointer to the PC System Menu icon.
The PC System Menu icon
Selected system is
displayed.
1
Systems in this dialog box
can be selected.
Use the Point ed buttons to move the red arrow
pointer to the desired system and then press the
SELECT button.
ꢀ
Customized Mode (1–5) set in
the PC Adjust Menu (pp.34–35).
ꢁꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Computer Input
Auto PC Adjustment
Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal and Vertical
positions to conform to your computer.
Remote Control
Direct Operation
The Auto PC adjustment function can be operated directly
by pressing the AUTO PC button on the remote control.
AUTO PC button
PC Adjust Menu
Menu Operation
Auto PC Adj
Press the MENU button to display the On-Screen
Menu. Use the Point 7 8 buttons to move the red
frame pointer to the PC Adjust Menu icon.
1
PC Adjust Menu icon
Use the Point ed buttons to move the red frame
pointer to Auto PC Adj. and then press the SELECT
button twice.
ꢀ
Move the red frame pointer
to Auto PC Adj. and press
the SELECT button.
“Please wait...” appears
while the Auto PC
adjustment is in process.
To store adjustment parameters
The adjusted parameters from the Auto PC Adjustment can
be stored in the projector. Once the parameters are stored,
the setting can be done just by selecting a Mode (1–5) in the
PC System Menu (see page 32). See also “Store” on page
35.
✔Notes:
• Fine sync, Total dots, Horizontal and Vertical position of
some computers cannot be fully adjusted with the Auto
PC Adjustment function. When the image is not provided
properly with this operation, manual adjustments are
required (pp.34–35).
• The Auto PC Adjustment cannot be operated when 480i,
575i, 480p, 575p, 720p,1035i, or 1080i is selected in the
PC System Menu (p.32), or when the signal is coming
from the DVI-terminal.
ꢁꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Computer Input
Manual PC Adjustment
Some computers employ special signal formats which may not be tuned by Multi-scan system of this projector.
Manual PC Adjustment enables you to precisely adjust several parameters to match those signal formats. The
projector has five independent memory areas to store those parameters manually adjusted. It allows you to
recall the setting for a specific computer.
PC Adjust Menu
Press the MENU button to display the On-Screen
Menu. Use the Point 7 8 buttons to move the red
frame pointer to the PC Adjust Menu icon.
1
ꢀ
Use the Point ed buttons to move the red frame
pointer to the desired item and then press the SELECT
button to display the adjustment dialog box. Use the
Point 7 8 buttons to adjust the setting value.
PC Adjust Menu icon
Move the red frame pointer
to the desired item and press
the SELECT button.
Fine sync
Use the Point 7 8 buttons to adjust the value, eliminating a
flicker from the image displayed (from 0 to 31).
Status (Stored/Free) of the
selected Mode.
Selected Mode
Total dots
Use the Point 7 8 buttons to adjust the number of total dots
in one horizontal period to match your PC image.
Use the Point 7 8 buttons to
adjust the value.
Horizontal
Use the Point 7 8 buttons to adjust the horizontal picture
position.
Press the SELECT button
here to adjust other items.
Vertical
Use the Point 7 8 buttons to adjust the vertical picture
position.
Current mode
Press the SELECT button to show H-sync freq. and V-sync
freq. of the connected computer.
Clamp
Use the Point 7 8 buttons to adjust the clamp level. When
the image has dark bars, try this adjustment.
Press the SELECT button at
Current mode to show the
information of the connected
computer.
ꢁ4
Download from Www.Somanuals.com. All Manuals Search And Download.
Computer Input
Display area H
Use the Point 7 8 buttons to adjust the horizontal area
displayed by this projector.
Display area V
Use the Point 7 8 buttons to adjust the vertical area
displayed by this projector.
Move the red frame pointer
to the desired item and
press the SELECT button.
Reset
To reset the adjusted data, select Reset and press the
SELECT button. A confirmation box appears and then select
[Yes]. All adjustments will return to their previous figures.
Mode free
This Mode has stored
parameters.
To clear adjusted data
To clear the stored data, select Mode free and then press
the SELECT button. Move the red arrow pointer to the Mode
that you want to clear and then press the SELECT button.
Store
To store the adjusted data, select Store and then press the
SELECT button. Move the red arrow pointer to one of the
Modes 1 to 5 in which you want to store, and then press the
SELECT button.
Vacant
Values of “Total dots”,
“Horizontal”, “Vertical”,
“Display area H”, and
“Display area V”.
Quit
To store adjusted data
Exit the PC Adjust Menu.
Close this dialog box.
✔Notes:
• Display area (H/V) cannot be selected when 480i, 575i,
480p, 575p, 720p, 1035i, or 1080i is selected in the PC
System Menu (p.32).
• PC Adjust Menu cannot be selected when Computer
1(Digital) is selected in the Input Menu (p.31).
ꢁ5
Download from Www.Somanuals.com. All Manuals Search And Download.
Computer Input
Image Mode Selection
Direct Operation
Remote Control
IMAGE button
Dynamic
Select the desired image mode from among Dynamic,
Standard, Real, Blackboard (Green), Image 1, Image 2,
Image 3, and Image 4 by pressing the IMAGE button on the
remote control.
Standard
Real
Dynamic
For viewing pictures in a bright room.
IMAGE button
(Green)
Blackboard
Standard
Normal picture mode preset on the projector.
Image 1
Image ꢀ
Image ꢁ
Real
Picture mode with improved halftone for graphics.
Blackboard (Green)
For the image projected on a blackboard.
This mode help enhance the image projected on a
blackboard. This is mainly effective on a green colored board,
not truly effective on a black colored board.
Image 4
Image 1–4
For viewing with the user preset image mode in the Image
Adjust Menu (see pages 37-38). This Image memory is
provided in each computer, component, and video input
source.
Image Select Menu icon
Menu Operation
Image Select Menu
Press the MENU button to display the On-Screen
Menu. Use the Point 7 8 buttons to move the red
frame pointer to the Image Select Menu icon.
1
Move the red frame pointer to
the desired image mode and
press the SELECT button.
Use the Point ed buttons to move the red frame
pointer to the desired image mode and then press the
SELECT button.
ꢀ
Dynamic
For viewing pictures in a bright room.
Standard
Normal picture mode preset on the projector.
The selected image mode is check marked.
Real
Picture mode with improved halftone for graphics.
Blackboard(Green)
For the image projected on a blackboard. See above for
further description.
Image 1~4
For viewing with the user preset image mode in the Image
Adjust Menu (see pages 37-38).
ꢁ6
Download from Www.Somanuals.com. All Manuals Search And Download.
Computer Input
Image Adjustment
Press the MENU button to display the On-Screen
Menu. Use the Point 7 8 buttons to move the red
frame pointer to the Image Adjust Menu icon.
Image Adjust Menu
1
Use the Point ed buttons to move the red frame
pointer to the desired item and then press the SELECT
button to display the adjustment dialog box. Use the
Point 7 8 buttons to adjust the setting value.
Image Adjust Menu icon
Move the red frame
pointer to the desired
item and then press
the SELECT button.
ꢀ
Contrast
Press the Point 7 button to decrease the contrast; press the
Point 8 button to increase the contrast (from 0 to 63).
Brightness
Press the Point 7 button to decrease the brightness; press
the Point 8 button to increase the brightness (from 0 to 63).
Selected Image mode
Color temp
Use the Point 7 8 buttons to select the desired Color temp.
level (High, Mid, Low, or XLow).
Use the Point 7 8 buttons
to adjust the setting value.
White balance (Red)
Press the Point 7 button to lighten red tone; press the Point
8 button to deepen red tone (from 0 to 63).
White balance (Green)
Press the Point 7 button to lighten green tone; press the
Point 8 button to deepen green tone (from 0 to 63).
White balance (Blue)
✔Note:
Press the Point 7 button to lighten blue tone; press the
Point 8 button to deepen blue tone (from 0 to 63).
• When the White balance Red, Green, or
Blue is adjusted, the Color temp. level will
change to “Adj.”.
Sharpness
Press the Point 7 button to decrease the sharpness of the
image; press the Point 8 button to increase the sharpness
of the image (from 0 to 15).
Gamma
Use the Point 7 8 buttons to adjust the gamma value to
obtain a better balance of contrast (from 0 to 15).
Reset
To reset the adjusted data, select Reset and press the
SELECT button. A confirmation box appears and then select
[Yes]. All adjustments will return to their previous figures.
ꢁ7
Download from Www.Somanuals.com. All Manuals Search And Download.
Computer Input
Store
To store the adjusted data, select Store and press the
SELECT button. Use the Point ed buttons to select one
from Image 1 to 4 and press the SELECT button.
A confirmation box appears and then select [Yes]. Stored
data can be called up by selecting an “Image (1–4)” in the
Image Mode Selection on page 36.
Image Mode Menu
Move the red frame
pointer to an image
item to be set and
then press the
SELECT button.
Quit
Exit the Image Adjust Menu.
A confirmation
box appears
and then select
[Yes]
Store icon
Screen Size Adjustment
This projector has the picture screen resize function, which enables you to customize the image size.
Press the MENU button to display the On-Screen
Menu. Use the Point 7 8 buttons to move the red
frame pointer to the Screen Menu icon.
Screen Menu
1
Screen Menu icon
Use the Point ed buttons to move the red frame
pointer to the desired function and then press the
SELECT button.
ꢀ
Move the red frame
pointer to the function
and press the
Normal
SELECT button.
Provide the image to fit the screen size.
True
Provide the image in its original size. When the original
image size is larger than the screen size (1280 x 800), the
projector enters to the panning mode automatically. Use the
Point ed7 8 buttons to pan the image. When adjusted, the
arrows will turn red. When reached to the correction limits,
the arrows will disappear.
✔Notes:
• This Screen Menu cannot be operated
when 720p(HDTV), 1035i (HDTV), or
1080i (HDTV) is selected in the PC
System Menu (p.32).
• This projector cannot display any
resolution higher than 1600 x 1200. If
your computer’s screen resolution is
higher than it, reset the resolution to the
lower before connecting to the projector.
• The image data in other than 1280 x 800
is modified to fit the screen size in initial
mode.
Full
Provide the full screen image.
• True, Full screen, and Digital zoom
+/– cannot be selected when 480i, 575i,
480p, or 575p is selected in the PC
System Menu (p.32).
ꢁ8
Download from Www.Somanuals.com. All Manuals Search And Download.
Computer Input
Custom
Adjust the screen scale and position manually with this
function.
Press the SELECT button at Custom and the “Custom” is
displayed on the screen for a few seconds and then the
Aspect dialog box appears.
Scale H/V .......... Adjust the Horizontal/Vertical screen scale.
H&V................... When set to “On,” the aspect ratio is
fixed. The “Scale V” appears dimmed
and becomes unavailable. Adjust “Scale
H,” then the screen scale is automatically
modified based on the aspect ratio.
Position H/V....... Adjust the Horizontal/Vertical screen
position.
Press the SELECT button at
Common or Reset, to display a
confirmation box.
Common............ Save the adjusted scale to all the inputs.
Press the SELECT button at Common to
display a confirmation box. To save the
scale, press the SELECT button at “Yes.”
When Custom is selected, the saved scale
is used.
Reset................. Reset the all adjusted values. Press
the SELECT button at Reset to display
a confirmation box. To reset, press the
SELECT button at “Yes.”
✔Notes:
• When no signal is detected, “Normal” is set
automatically and the Aspect dialog box disappears.
• The adjustable range for Scale H/V and Position H/V is
limited depending on the input signal.
Remote Control
For zooming in and out the images
POINT buttons
Digital zoom +
Select Digital zoom +. The On-Screen Menu disappears and
“D. zoom +” appears. Press the SELECT button to expand
the image size. Use the Point ed7 8 buttons to pan the
image. The Panning function can work only when the image
is larger than the screen size.
SELECT button
A projected image can be also expanded by pressing the
D.ZOOM e button on the remote control.
D ZOOM + button
D ZOOM - button
Digital zoom –
Select Digital zoom –. The On-Screen Menu disappears and
“D. zoom –” appears. Press the SELECT button to compress
image size.
The projected image can be also compressed by pressing the
D.ZOOM d button on the remote control.
✔Notes:
• The panning function may not operate
properly if the stored Mode in the PC
Adjust Menu is used (p.35).
• Minimum compression ratio can be
limited depending on the input signal or
when the Keystone function is working.
• True, Full screen, and Digital zoom
+/– cannot be selected when 480i, 575i,
480p, or 575p is selected in the PC
System Menu (p.32).
To exit the Digital zoom +/– mode, press any button except
the D.ZOOM ed buttons, SELECT, and Point buttons.
To return to the previous screen size, select a screen size
from the Screen Size Adjustment Menu or select an input
source from the Input Source Selection Menu (see pages
30-31) again, or adjust the screen size with the D.ZOOM
ed buttons.
• Digital zoom +/- cannot be selected when
Full screen or True is selected.
ꢁ9
Download from Www.Somanuals.com. All Manuals Search And Download.
Video Input
Input Source Selection (Video, S-video)
Direct Operation
Top Control
INPUT button
Choose Video by pressing the INPUT button on the top
control or the VIDEO button on the remote control.
Before using these buttons, correct input source should be
selected through menu operation as described below.
INPUT button
Computer 1 (Analog)
Computer 1 (Digital)
Computer ꢀ
Video
Wired
Wireless
Remote Control
VIDEO button
Menu Operation
Press the MENU button to display the On-Screen
Menu. Use the Point 7 8 buttons to move the red
frame pointer to the Input Menu icon.
1
Input Menu icon
Use the Point ed buttons to move the red arrow
pointer to Video and then press the SELECT button to
display the Source Select Menu.
ꢀ
Input Menu
Move the pointer to the desired source and then press
the SELECT button.
ꢁ
Move the pointer to
Video and press the
SELECT button.
When selecting Auto, the projector automatically
Auto
detects incoming video signal, and adjusts itself
to optimize its performance. The projector selects
connection in the following order:
1. S-video
2. Video
VIDEO
Source Select Menu (VIDEO)
When video input signal is connected to the
VIDEO jack, select Video.
Video
Move the pointer to the source
that you want to select and
press the SELECT button.
When video input signal is connected to the S-
VIDEO jack, select S-video.
S-video
✔Notes:
• Wired and Wireless are for the Network function. See
the owner’s manual “Network Set-up and Operation”
• When the Input Search function is set to “On1” or “On2”,
the input signal will be searched automatically (p.51).
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Video Input
Input Source Selection (Component, RGB Scart ꢀ1-pin)
Direct Operation
Top Control
INPUT button
Choose Computer 2 by pressing the INPUT button on the
top control or press the COMPUTER button on the remote
control.
Before using these buttons, correct input source should be
selected through Menu operation as described below.
Computer 1 (Analog)
Computer 1 (Digital)
Computer ꢀ
Video
Wired
Wireless
Remote Control
COMPUTER button
Menu Operation
Press the MENU button to display the On-Screen
Menu. Use the Point 7 8 buttons to move the red
frame pointer to the Input Menu icon.
Computer 1 (Analog)
Computer 1 (Digital)
Computer ꢀ
1
Use the Point ed buttons to move the red arrow
pointer to Computer 2 and then press the SELECT
button.
ꢀ
Input Menu icon
Input Menu
After the Source Select Menu appeared for Computer
2, move the pointer to Component or RGB(Scart) and
then press the SELECT button.
ꢁ
When the input source is coming from video
equipment connected to the COMPUTER
IN 2/COMPONENT IN terminal with a
Component
RGB (Scart)
Move the pointer (red
arrow) to Computer 2
and press the SELECT
button.
Component-VGA Cable, select Component.
When the input source is coming from video
equipment connected to the COMPUTER
IN 2/COMPONENT IN terminal with a Scart-
VGA Cable, select RGB (Scart).
Computer
ꢀ
Source Select Menu
Move the pointer to
Component or RGB(Scart)
and press the SELECT
button.
✔Note:
• Wired and Wireless are for the Network function. See
owner’s manual “Network Set-up and Operation” .
• When the Input Search function is set to “On1” or “On2”,
the input signal will be searched automatically (p.51).
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Video Input
Video System Selection
Press the MENU button to display the On-Screen
Menu. Use the Point 7 8 buttons to move the red
frame pointer to the AV System Menu icon.
1
ꢀ
Use the Point ed buttons to move the red arrow
pointer to the desired system and then press the
SELECT button.
Video or S-Video
AV System Menu (Video or S-Video)
Auto
The projector automatically detects an incoming video
system, and adjusts itself to optimize its performance.
When Video System is PAL-M or PAL-N, select the system
manually.
AV System Menu icon
The selected system is
displayed.
PAL/SECAM/NTSC/NTSC4 4ꢁ/PAL-M/PAL-N
Move the pointer to the
desired system and press
the SELECT button.
If the projector cannot reproduce proper video image,
select a specific broadcast signal format from among PAL,
SECAM, NTSC, NTSC 4.43, PAL-M, and PAL-N.
Component
AV System Menu (Component)
Auto
The projector automatically detects an incoming video
signal, and adjusts itself to optimize its performance.
AV System Menu icon
The selected system is
displayed.
COMPONENT VIDEO SIGNAL FORMAT
If the projector cannot reproduce proper video image, select
a specific component video signal format from among 480i,
575i, 480p, 575p, 720p, 1035i, and 1080i.
Move the pointer to the
desired system and press
the SELECT button.
✔Note:
• The AV System Menu cannot be selected when
selecting RGB (Scart).
4ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Video Input
Image Mode Selection
IMAGE button
Direct Operation
Remote Control
Dynamic
Standard
Cinema
Select the desired image mode from among Dynamic,
Standard, Cinema, Blackboard (Green), Image 1, Image 2,
Image 3, and Image 4 by pressing the IMAGE button on the
remote control.
Dynamic
For viewing pictures in a bright room.
(Green)
Blackboard
IMAGE button
Standard
Normal picture mode preset on the projector.
Image 1
Image ꢀ
Image ꢁ
Cinema
Picture mode adjusted with fine tone.
Blackboard (Green)
For the image projected on a blackboard.
This mode help enhance the image projected on a
blackboard. This is mainly effective on a green colored board,
not truly effective on a black colored board.
Image 4
Image 1–4
For viewing with the user preset image mode in the Image
Adjust Menu (see pages 44–45). This Image memory is
provided in each computer, component, and video input
source.
Image Select Menu icon
Image Select Menu
Menu Operation
Press the MENU button to display the On-Screen
Menu. Use the Point 7 8 buttons to move the red
frame pointer to the Image Select Menu icon.
1
Move the red frame pointer to the
desired image mode and press
the SELECT button.
Use the Point ed buttons to move the red frame
pointer to the desired image mode and then press the
SELECT button.
ꢀ
Dynamic
For viewing pictures in a bright room.
Standard
Normal picture mode preset on the projector.
The selected image mode is check marked.
Cinema
Picture mode adjusted with fine tone.
Blackboard(Green)
For the image projected on a blackboard. See above for
further description.
Image1–4
For viewing with the user preset image mode in the Image
Adjust Menu (see pages 44–45).
4ꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Video Input
Image Adjustment
Press the MENU button to display the On-Screen
Menu. Use the Point 7 8 buttons to move the red
frame pointer to the Image Adjust Menu icon.
Image Adjust Menu
1
ꢀ
Use the Point ed buttons to move the red frame
pointer to the desired item and then press the SELECT
button to display the adjustment dialog box. Use the
Point 7 8 buttons to adjust the setting value.
Image Adjust Menu icon
Move the red frame
pointer to the desired
item and then press
the SELECT button.
Contrast
Press the Point 7 button to decrease the contrast; press the
Point 8 button to increase the contrast (from 0 to 63).
Brightness
Press the Point 7 button to decrease the brightness; press
the Point 8 button to increase the brightness (from 0 to 63).
Color
Press the Point 7 button decrease the intensity of the color;
press the Point 8 button increase the intensity of the color
(from 0 to 63).
Use the Point 7 8 buttons to
adjust the setting value.
Press the SELECT button
at this item to display other
items.
Tint
Press the Point 7 8 buttons to adjust the tint value to get a
proper color balance (from 0 to 63).
Color temp
Use the Point 7 8 buttons to select the desired Color temp.
level (High, Mid, Low, or XLow).
White balance (Red)
Press the SELECT button
here to display the previous
items.
Press the Point 7 button to lighten red tone; press the Point
8 button to deepen red tone (from 0 to 63).
White balance (Green)
Press the Point 7 button to lighten green tone; press the
Point 8 button to deepen green tone (from 0 to 63).
White balance (Blue)
Press the Point 7 button to lighten blue tone; press the
Point 8 button to deepen blue tone (from 0 to 63).
✔Notes:
• When the White balance Red, Green, or Blue is
adjusted, the Color temp. level will change to “Adj.”.
• Tint cannot be selected when the video system is PAL,
SECAM, PAL-M, or PAL-N (p.42).
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Video Input
Sharpness
Press the Point 7 button to decrease the sharpness of the
image; press the Point 8 button to increase the sharpness
of the image (from 0 to 15).
Gamma
Use the Point 7 8 buttons to adjust the gamma value to
obtain a better balance of contrast (from 0 to 15).
Noise reduction
Noise interference on the screen can be reduced. Select
one of the following options to get smoother images.
Off.......... Disabled.
L1 .......... Lower reduction
L2 .......... Higher reduction
Progressive
An interlaced video signal can be displayed in progressive
mode. Select one of the following options.
Off.......... Disabled.
L1 .......... For an active picture.
L2 .......... For a still picture.
Film........ For watching a film. With this function, the
projector reproduces pictures faithful to the
original film quality.
Reset
To reset the adjusted data, select Reset and press the
SELECT button. A confirmation box appears and then select
[Yes]. All adjustments will return to their previous figures.
Image Mode Menu
Move the red frame
pointer to an image
item to be set and
then press the
Store
SELECT button.
Store icon
To store the adjusted data, select Store and press the
SELECT button. Use the Point ed buttons to select one
from Image 1 to 4 and press the SELECT button.
A confirmation box appears and then select [Yes]. Stored
data can be called up by selecting an “Image (1–4)” in the
Image Select Menu on page 43.
Quit
A confirmation box
appears and then
select [Yes].
Exit the Image Adjust Menu.
✔Notes:
• Noise reduction and Progressive cannot be selected
when 480p, 575p, 720p, 1035i, or 1080i is selected
(p.42).
• Reset and Store icons will be displayed when any
adjustment is made.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Video Input
Screen Size Adjustment
This projector has the picture screen resize function, which enables you to customize the image size.
Screen Menu
Press the MENU button to display the On-Screen
Menu. Use the Point 7 8 buttons to move the red
frame pointer to the Screen Menu icon.
1
ꢀ
Screen Menu icon
Use the Point ed buttons to move the red frame
pointer to the desired function and then press the
SELECT button.
NW
Move the red frame pointer to the
desired function and press the
SELECT button.
Normal
Provide the image at the 4:3 normal video aspect ratio.
Zoom
Pan the horizontal direction of the image and cut the vertical
direction of the image to fit the screen size (16:9).Only for
4:3 video aspect ratio signals.
Natural wide
NW
Modify the 4:3 aspect ratio image to fit the screen size(16:9
aspect ratio) by stretching the image to make it look natural.
✔Note:
• Screen Menu cannot be operated when 720p, 1035i, or
1080i is selected in the AV System Menu (p42).
Custom
Adjust the screen scale and position manually with this
function.
Press the SELECT button at Custom and the "Custom" is
displayed on the screen for a few seconds and then the
Aspect dialog box appears.
Scale H/V .......... Adjust the Horizontal/Vertical screen
scale.
H&V................... When set to "On", the aspect ratio is
fixed. The "Scale V" appears dimmed
and becomes unavailable. Adjust the
"Scale H", then the screen scale is
automatically modified based on the
aspect ratio.
Press the SELECT button at
Common or Reset, to display
a confirmation box.
Position H/V.........Adjust the Horizontal/Vertical screen
position.
✔Notes:
Common............ Save the adjusted scale to all the inputs.
Press the SELECT button at Common to
display a confirmation box. To save the
scale, press the SELECT button at "Yes",
When Custom is selected, the saved
scale is used.
• When no signal is detected, "Normal" is
set automatically and the Aspect dialog
box disappears.
• The adjustable range for Scale H/V and
Position H/V is limited depending on the
input signal.
Reset................. Reset the all adjusted values. Press
the SELECT button at Reset to display
a confirmation box. To reset, press the
SELECT button at "Yes".
• "Wide" cannot be operated when 720p,
1035i, or 1080i is selected in the AV
System Menu (p.42).
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting
Setting
This projector has a Setting menu that allows you to set up
the other various functions described below.
Setting Menu (Language)
Press the MENU button to display the On-Screen
Menu. Use the Point 7 8 buttons to move the red
frame pointer to the Setting Menu icon.
1
Setting Menu icon
Set the red frame
pointer to the item
and press the
Use the Point ed buttons to move the red frame
pointer to the desired item and then press the SELECT
button. The Setting dialog box appears.
ꢀ
SELECT button.
Language
Press the SELECT button
at Language, then the
Language Menu appears.
The language used in the On-Screen Menu is available in
English, German, French, Italian, Spanish, Portuguese,
Dutch, Swedish, Finnish, Polish, Hungarian, Romanian,
Russian, Chinese, Korean, and Japanese.
Auto setup
This function enables Auto Keystone correction and Auto PC
adjustment by pressing the AUTO SETUP/CANCEL button
on the top control or the AUTO SET/CANCEL button on the
remote control. Settings for those functions can be altered
as follows:
Auto PC Adj
On. . . . . . .Enables Auto PC Adjustment when pressing
the AUTO SET/CANCEL button on the remote
control or the AUTO SETUP/CANCEL button
on the top control.
Off. . . . . . .Disables Auto PC Adjustment.
Press the SELECT button
here to display the other
languages.
Auto Keystone
Auto. . . . . Always works and corrects keystone distortion
according to the projector's tilt.
Manual . . .Works only when pressing the AUTO SET/
CANCEL button on the remote control or the
AUTO SETUP/CANCEL button on the top
control.
Auto setup
Off. . . . . . .Disables Auto Keystone.
✔Notes:
• Auto PC Adj. and Auto Keystone cannot be set "Off" at the
same time.
• Auto Keystone corrects vertical distortion only, not correct
horizontal distortion.
Select Auto setup and this
box appears. Choose the
desired setting for Auto
• The Auto Keystone cannot work when Ceiling feature is set
"On" in the Setting menu (p.51).
• Perfect correction of the image distortion cannot be ensured
with the Auto setup function. If the distortion is not corrected
properly by pressing the AUTO SETUP/CANCEL or AUTO
SET/CANCEL button, adjust manually by pressing the
KEYSTONE button on the remote control or selecting
Keystone in the Setting menu (pp.26, 48).
keystone and Auto PC adj.
with the Point 7 8 buttons.
• Fine sync, Total dots, Horizontal and Vertical position of
some computers cannot be fully adjusted with the Auto PC
Adjustment function. When the image is not provided properly
with this operation, manual adjustments are required (pp.34–
35).
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting
Keystone
Keystone
This function is used to store or reset the keystone
correction when the AC power cord is unplugged. Use the
Point 7 8 buttons to switch between each option.
Store........ Keep the keystone correction even when the
AC power cord is unplugged.
Use the Point 7 8
buttons to switch
between the options.
Reset....... Release the keystone correction when the AC
power cord is unplugged.
To correct keystone distortion, press the SELECT button.
The “Keystone” appears on the screen. Use the Point ed
buttons to correct keystone distortion (p.26).
Blue back
When this function is “On,” a blue image is displayed while
the input signal is not detected.
Display
This function decides whether to display On-Screen
Displays.
On............................ Show all the On-Screen displays.
Use this function when you want
to project images after the lamp
becomes bright enough. The factory
default setting is in this option.
Countdown Off......... Show the input image instead of
the countdown when turning on the
projector. Use this function when you
want to project the image as early as
possible even when the lamp is not
bright enough.
Off............................ Hide the On-Screen Displays except;
●On-Screen Menu
●“Power off?” (p.23)
●“No signal” for Power management
(p.52)
●“Please wait ...”
●Arrows for the True function
in the Screen Menu (p.38)
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting
Logo (Logo and Logo PIN code lock settings)
This function allows you to customize the screen logo with
Logo select, Capture, and Logo PIN code lock functions.
✔Note:
Logo select
• When “On” is selected in the Logo PIN code lock
function, Logo select and Capture functions cannot be
selected.
Logo select
This function decides on the starting-up display from
among following options.
User......... Show the image you captured
Default..... Show the factory-set logo
Off............ Show the countdown display only
Capture
This function enables you to capture an image being
projected to use it for a starting-up display or interval of
presentations.
Capture
Select Capture and press the SELECT button.
A confirmation box appears and select [Yes] to capture the
projected image.
After capturing the projected image, go to the Logo select
function and set it to “User”. Then the captured image will
be displayed the next time you turn on the projector or
when you press the NO SHOW button (see page 29).
To cancel the Capture function, select [No].
Select [Yes] to capture
the projected image.
✔Notes:
• Before capturing an image, select “Standard” in
the Image Select Menu to capture a proper image
(pp.36, 43).
• A signal from a computer can be captured up to XGA
(1024 x 768). A signal from video equipment can be
captured except for 720p, 1035i, and 1080i.
• When capturing the image that has been adjusted
by the Keystone function, the adjusted data is
automatically reset and the projector captures an
image without keystone correction.
Select [Yes] to
stop capturing.
• When the Logo PIN code lock function is set to “On,”
the Capture function cannot be selected.
• When starting to capture a new image, the previously
stored image is cleared even if you cancel the
capturing.
• When there is no captured image or it is interrupted
while capturing a image, the Capture function cannot
be selected, you can only switch between Default
and Off.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting
Logo PIN code lock
Logo PIN code lock
This function prevents an unauthorized person from
changing the screen logo.
Off............ The screen logo can be changed freely from
the Logo Menu (p.49).
On............ The screen logo cannot be changed without
a Logo PIN code.
If you want to change the Logo PIN code lock setting,
press the SELECT button and the Logo PIN code dialog
box appears. Enter a Logo PIN code by following the
steps below. The initial Logo PIN code is set to “4321” at
the factory.
Enter a Logo PIN code
Enter a Logo PIN code
Use the Point ed buttons to enter a number. Press the
Point 8 button to fix the number and move the red frame
pointer to the next box. The number changes to “✳.” If you
fixed an incorrect number, use the Point 7 button to move
the pointer to the number you want to correct, and then
enter the correct number.
After a correct Logo PIN code
is entered, the following dialog
box appears.
Repeat this step to complete entering a four-digit number.
After entering the four-digit number, move the pointer to
“Set.” Press the SELECT button so that you can start to
operate the projector.
Change the Logo PIN code lock setting
If you entered an incorrect Logo PIN code, “Logo PIN
code” and the number (✳✳✳✳) will turn red for a moment.
Enter the correct Logo PIN code all over again.
Use the Point 7 8 buttons to
switch On/Off.
Change the Logo PIN code lock setting
Use the Point 7 8 buttons to switch On/Off, and then
press the Point d button to move the pointer to “Quit.”
Press the SELECT button to close the dialog box.
Change the Logo PIN code
Change the Logo PIN code
Logo PIN code can be changed to your desired four-digit
number. Press the Point d button to select “Logo PIN
code change” and then press the SELECT button. The
New Logo PIN code input dialog box appears. Set a new
Logo PIN code.
CautIoN:
whEN you havE ChaNgEd thE Logo PIN
CodE, wrItE dowN thE NEw PIN CodE
IN CoLumN of thE Logo PIN CodE No.
mEmo oN PagE 80, aNd kEEP It SECurELy.
ShouLd thE Logo PIN CodE bE LoSt or
forgottEN, thE Logo PIN CodE SEttINg
CaN No LoNgEr bE ChaNgEd.
Be sure to note the new Logo PIN code and keep it at
hand. If you lost the number, you could no longer change
the Logo PIN code setting. For details on PIN code
setting, refer to “PIN code lock” on pages 54–55.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting
Ceiling
Ceiling
When this function is set to “On,” the picture will be top/
bottom and left/right reversed. This function is used to
project the image from a ceiling-mounted projector.
Rear
When this function is set to “On,” the picture will be left/right
reversed. This function is used to project the image from
rear of the screen.
Rear
Input search
This function detects the input signal automatically. When
a signal is found, the search will stop. Use the Point 7 8
buttons to select one of the following options.
Off.......... Input search will not work.
On1........ Input search works under the following situation.
–When pressing the INPUT button on the top
control.
–When pressing the COMPUTER button or
VIDEO button on the remote control.
On2........ Input search works under the following situation.
–When turning on the projector by pressing the
POWER ON/STAND-BY button on the top
control or the remote control.
–When pressing the COMPUTER button or
VIDEO button on the remote control.
–When pressing the INPUT button on the top
control.
– When the current input signal is cut off.*
*If the No show or Freeze function is active, cancel it to
activate the Input search. It is also unavailable when On-
Screen menu is displayed.
✔Notes:
• While Input search is set to “On1” or “On2,” the status of Input and Lamp are displayed every time the signal
is switched.
• If the INPUT button on the top control or COMPUTER or VIDEO buttons on the remote control is pressed
during Input search is in progress, Input search will stop and go back to the previous input signal.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting
Standby mode
This function is available when operating the projector via
network.
Normal....... Supply the power to the network function even
after turning off the projector. You can turn on/
off the projector via network, modify network
environment, and receive an e-mail about
projector status while the projector is powered
off.
Eco ............ Select “Eco” when you do not use the projector
via network. The projector’s network function
will stop when turning off the projector.
Refer to the owner’s manual “Network Set-up and
Operation”.
✔Note:
• When selecting Normal, the cooling fans may be running
depending on the temperature inside the projector even
if the projector is turned off.
Power management
Power management
For reducing power consumption as well as maintaining
the lamp life, the Power management function turns off the
projection lamp when the projector is not operated for a
certain period.
Time left before Lamp is off.
If the input signal is interrupted and no button is pressed for
more than 30 seconds, the timer display with “No signal”
appears. It starts the countdown until the lamp is turned off.
Use the Point 7 8 buttons to set the countdown timer.
Select one of the following options:
Ready.................. When the lamp has been fully cooled
down, the POWER indicator changes
to green blinking. In this condition, the
projection lamp will be turned on if the
input signal is reconnected or any button
on the top control or remote control is
pressed.
Shut down............ When the lamp has been fully cooled
down, the power will be turned off.
Off........................ Power management function is off.
Press the SELECT button at
Power management and this
dialog box appears. Use the
Point 7 8 buttons to choose
one of the three options.
Press the Point d button to
select the timer, and then
use the Point 7 8 buttons to
set timer.
✔Note:
• Factory default is "Ready: 5 min.".
5ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting
On start
When this function is set to “On,” the projector will be
automatically turned on just by connecting the AC power
cord to a wall outlet.
✔Note:
• Be sure to turn off the projector properly (see “Turning
Off the Projector” on page 23). If the projector is turned
off in the incorrect sequence, the On start function does
not work properly.
Lamp control
This function allows you to change brightness of the screen.
Auto........... The brightness according to the input signal
(between High and Eco mode).
High........... Brighter than the Normal mode.
Normal....... Normal brightness
Pointer
Eco ............ Lower brightness reduces the lamp power
consumption and extends the lamp life.
Pointer
You can emphasize a part of the projected image with
this function. Use the Point ed buttons to choose either
Spotlight or Pointer and press the SELECT button. Then
use the Point 7 8 buttons to select a size of the Spotlight
(Large, Middle, or Small) or a pattern of the Pointer (Arrow,
Finger, or Dot). See “Pointer Function” on page 14.
Use the Point ed buttons
to choose either Spotlight
or Pointer, and then use
the Point 7 8 buttons
to switch between the
options.
Remote control
The eight different remote control codes (Code 1–Code 8)
are assigned to the projector; the factory-set, initial code
(Code 1) and the other seven codes (Code 2 to Code 8).
Remote control
The same code should set on both the projector and the
remote control. For example, operating the projector in
“Code 7”, the remote control code also must be switched to
“Code 7”.
To change the code for the projector
Select a remote control code in this Setting Menu.
To change the code for the remote control:
While holding down the MENU button, press the IMAGE
button the number of times corresponding to the remote
control code for the projector. See “Remote Control Code”
on page 15.
5ꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting
Security (Key lock and PIN code lock, Alarm settings)
Key lock
This function allows you to use the Key lock and PIN code
lock function to set the security for the projector operation.
Key lock
This function locks the top control and remote control
buttons to prevent operation by unauthorized persons.
..... Unlocked.
..... Lock the operation of the top control. To
unlock, use the remote control.
..... lock the operation of the remote control.
To unlock, use the top control.
Select Key lock. Use
the Point ed buttons
to choose one of the
options and select
[Yes] to activate it.
If the top control accidentally becomes locked and
you do not have the remote control nearby or there is
something wrong with your remote control, contact the
dealer where you purchased the projector or the service
center.
PIN code lock
PIN code lock
This function prevents the projector from being operated
by unauthorized persons and provides the following
setting options for security.
Off............ Unlocked.
On1.......... Enter the PIN code every time turning on
the projector.
On2.......... Enter the PIN code to operate the projector
once the power cord is disconnected; as
long as the AC power cord is connected,
the projector can be operated without a
PIN code.
When the projector is locked
with a PIN code, the PIN code
lock symbol appears on the
menu bar.
Whenever you change the PIN code lock setting or the
PIN code (the four-digit number), you are required to
enter the PIN code. The “1234” is set as the initial PIN
code at the factory.
If you want to change the PIN code lock setting, Press
the SELECT button and the PIN code dialog box
appears.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting
Enter a PIN code
Enter a PIN code
Use the Point ed buttons to enter a number. Press the
Point 8 button to fix the number and move the red frame
pointer to the next box. The number changes to “✳.” If you
fixed an incorrect number, use the Point 7 button to move
the pointer to the number you want to correct, and then
enter the correct number.
Repeat this step to complete entering a four-digit number.
After a correct PIN code is
entered, the following dialog
box appears.
After entering the four-digit number, move the pointer to
“Set.” Press the SELECT button so that you can start to
operate the projector.
Change the PIN code lock setting
If you entered an incorrect PIN code, “PIN code” and the
number (✳✳✳✳) will turn red for a moment. Enter the
correct PIN code all over again.
Change the PIN code lock setting
Use the Point 7 8 buttons to select Off, On1, or On2 and
then move the pointer to “Quit” with the Point d button.
Press the SELECT button to close the dialog box.
Use the Point 7 8 buttons to
switch between the options.
Change the PIN code
Change the PIN code
The PIN code can be changed to your desired four-
digit number. Press the Point d button to select “PIN
code change” and press the SELECT button. The New
PIN code input dialog box appears. Set a new PIN code.
CautIoN:
whEN you havE ChaNgEd thE PIN CodE, wrItE
dowN thE NEw PIN CodE IN ColumN of thE
PIN CodE No. mEmo oN PagE 80, aNd kEEP It
SECurEly. If you forgEt your PIN CodE, thE
ProjECtor CaN No loNgEr bE StartEd.
alarm
This function allows you to configure the Alarm
operation. See “How to Use the Antitheft Alarm Function”
on pages 58–60.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting
Fan
Fan
This function provides the following options in the cooling
fans’ operation when the projector is turned off (p.23).
L1 ...... Normal operation
L2 ...... Slower and lower-sound than the normal operation
(L1), but it takes more time to cool the projector
down.
Fan control
Choose the running speed of cooling fans from the following
options.
Normal..... Normal speed
Max.......... Faster than the normal speed.
This function is used to set the cooling fans’ operation to the
projector’s setting environment. Set this function properly in
accordance with the projector’s installation method.
Otherwise, the cooling fans will not work properly and that
causes malfunctions of the projector and decreases the
lamp life.
Fan Control Setting
50º
50º
Be sure to set the Fan control in MAX in the setting menu
when the projector is inclined between +40 degrees to
+140 degrees to the horizontal plane.
40º
40º
Fan Control
"Max"
180º
0º
Fan Control
"Normal"
Warning log
This function records anomalous operations while the
projector is in operation and use it when diagnosing faults.
Up to 10 warning logs are displayed with the latest warning
message at the top of the list, followed by previous warning
messages in chronological order.
Fig 1 Lamp replacement icon
✔Note:
• When the Factory default function is executed, all the
warning log records will be deleted.
This icon appears on the screen when the end of
lamp life is approaching.
Lamp counter
✔Note:
This function is used to reset the lamp counter.
• This icon also appears at turning on and
selecting input source.
When the lamp life is left less than 100 hours, the Lamp
replacement icon (Fig.1) will appear on the screen,
indicating that the end of lamp life is approaching.
Fig ꢀ Lamp replacement icon
When the lamp life is left 0 hour, the Lamp replacement icon
(Fig.2) will appear on the screen, indicating that the end of
lamp life is reached.
This icon appears on the screen when the end of
lamp life is reached.
When replacing the projection lamp, reset the lamp counter.
See "Resetting the Lamp Counter" on page 66.
✔Note:
• At turning on, the icon (Fig.2) will appear.
At selecting input source, the icon (Fig.1)
will appear.
✔Note:
• The Lamp replacement icons (Fig.1 and Fig.2) will not
appear when the Display function is set to “Off” (p.48),
during “Freeze” (p.28), or “No show” (p.29).
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting
Filter counter
Filter counter
This function is used to set a frequency for the filter cleaning.
When the projector reached a specified time between
cleanings, a Filter warning icon appears on the screen,
notifying the cleaning is necessary. After cleaning the filter,
be sure to select RESET and set the timer. The Filter warning
icon will not turn off until the filter counter is reset.
Use the Point 7 8 buttons
to set the timer. Select
from (Off/100H/ 200H/
300H) depending on the
use environment.
For details about resetting the timer, refer to “Resetting the
Filter Counter” on page 63.
Fig ꢁ Filter warning icon
Filter warning icon appears on the screen at a set
time.
✔Note:
• This icon also appears at turning on..
Fig 4 Filter warning icon
✔Notes:
• At selecting input source, the icon (Fig.4)
will appear..
• The Filter warning icons (Fig.3 and
Fig.4) will not appear when the Display
function is set to “Off” (p.48), during
“Freeze”(p.28), or "No show" (p.29).
Factory default
Factory default
This function returns all setting values except for the user
logo, PIN code lock, Logo PIN code lock, lamp counter, and
filter counter to the factory default settings.
Quit
Select Factory default and this
box appears. Select [Yes], and
the next box appears.
Exit the Setting Menu.
Select [Yes] to
activate it.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Antitheft Alarm Function
How to Use the Antitheft Alarm Function
Antitheft alarm function is provided to prevent the projector from being stolen. When this function is set to “On,” the
alarm rings as an unauthorized person tries to move the projector.
To activate the Alarm function for the first time after purchase, you must turn on the power once.
✔Notes:
• This function is not a guarantee against stealing.
• The alarm does not ring while the AC power cord is connected to an outlet even if the projector detects vibrations.
• The alarm will stop, as the AC power cord is connected to an outlet, except when the battery cover is open.
• Pressing the buttons is always accompanied by a sound. If no sound is produced after pressing a button, you need to press it again.
The Alarm function is operated by a built-in rechargeable
battery. The alarm will not work properly if the battery is not
charged enough. See page 60 for details.
Set and release the Antitheft alarm function
The Alarm setting and release and PIN Code change can be
made without an AC power connection.
Top Control
Set the alarm
Press the F button three times to turn the alarm function
on. The ALARM indicator blinks for a few seconds and the
projector enters the warning mode. (If the battery is not
ALARM indicator
charged enough for the alarm function to operate normally,
it bleeps and the Alarm indicator will blink red every 20
seconds.)
During the Antitheft alarm function is on, the projector emits
a low-pitched sound when it detects vibration.
Rear Terminal
When the projector does not detect vibration for a few
seconds after the sound, it goes back to the warning mode.
When the projector detects more vibrations after the low-
pitched sound, the alarm starts ringing.
The Alarm operating configuration (Battery charge, Alarm
volume, Sensitivity, and Ringing time) can be selected in the
menu. See page 59.
✔Notes:
• You can test the alarm sound without setting the alarm function. Press
F button Button 1, 2, 3
and hold the F button, then the alarm starts ringing. The duration of the
alarm sound is the same as the “Ringing Time” setting (p.59).
• If you want to stop the alarm while it is ringing, insert the AC power
cord to an outlet or press the F button and enter the four-digit PIN code
number.
Release the alarm setting
Press the F button and enter the four-digit PIN code
number within about 10 seconds (The default PIN code is
set to “1111 ”) When the alarm is released, you will hear a
high-pitched confirmation sound
When you enter an incorrect PIN code, you will hear a low-
pitched sound If you enter an incorrect PIN code three
times in a row, the alarm will start ringing
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Antitheft Alarm Fun�ti�n
other settings
change the Pin ��de
t�p c�ntr�l
Press the F button and enter the four-digit PIN code
number within about 10 seconds. The ALARM indicator
1
blinks red for a few seconds and a high-pitched
confirmation sound is produced.
AlArm indi�at�r
While the indicator is blinking, enter a new PIN code,
then you will hear a high-pitched confirmation sound
and the ALARM indicator is turned off.
2
rear terminal
When you enter an incorrect PIN code, you will hear a
low-pitched sound. If you enter incorrect PIN code three
times in a row, the alarm will start ringing.
The PIN code for the Antitheft alarm function is a
combination of 1, 2, or 3. Use the buttons 1, 2, and 3 to
enter the PIN code. The default PIN code is “1111.”
F butt�n butt�n 1, 2, 3
reset the settings
Alarm
Select “Factory default” in the Setting menu to reset the
settings for the Antitheft alarm function.
✔n�te:
• This is effective only when the Antitheft alarm setting is released.
Alarm �perating ��nfigurati�n
The Alarm operating configuration can be changed when
the Antitheft alarm function is set to “Off.” See page 58 for
setting or releasing this function.
Press the SELECT button at
the Alarm icon to display the
Alarm setting dialog box.
Press the SELECT button at Alarm icon in the Setting Menu
to display the Alarm setting dialog box. Use the Point ed
buttons to select the desired option; use the Point 7 8
buttons to set the selected option.
Use the Point 7 8
buttons to set the
selected option.
Battery charge
See the next page for details.
Alarm volume
Small, Medium, Large
Sensitivity
Low..................... Less sensitive
Medium .............. Normal sensitivity
High ................... Highly sensitive (default)
Ringing time
✔n�tes:
• The Alarm icon appears dimmed and can be
unavailable when the Antitheft alarm function is set
to “On” or if the battery is not installed, discharged, or
coming to the end of its life.
10 seconds ........ Rings about 10 seconds (default).
60 seconds ........ Rings about 60 seconds.
Long time............ Rings until the end of the battery life.
• When the “Security” is selected in the Setting menu,
the Antitheft alarm setting buttons can be unavailable.
• When selecting “Long time” option in the Ringing time,
the duration of alarm sounding differs depending on the
battery life.
cAution:
when you hAve chAnged the Pin code, write down
the new Pin code in column oF the Pin code no. memo
on PAge 80, And keeP it securely. iF you Forget your
Pin code, some settings oF the AntitheFt AlArm
Function cAn no longer be chAnged.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Antitheft Alarm Function
Charge the built-in batteries
Set the Battery charge option in the Alarm setting menu to
“Auto.” The default setting is “Auto.”
Screw
As long as the AC power cord is connected and this option
is set to “Auto,” the built-in battery for Alarm function is being
charged at all times. While charging the battery, “Charging” is
displayed in the menu.
The “Charging” appears dimmed when the battery is fully
charged or the Battery charge option is set to “Off,” or if
charging malfunction occurs. Set the option to “Off” when
not using the Alarm function. This can save the power and
battery life.
Remove the screw and
open the battery cover.
Replace the rechargeable batteries
Use only the specified battery for this projector. Using other
types of battery may cause accident or fire hazard.
Replacement Battery: SANYO Ni-MH BATTERY PACK
Part No. 645 089 8587
How to replace the rechargeable batteries
Unplug the AC power cord from a wall outlet.
1
Set the Alarm function to “Off” (see page 58). If it is not
released, the alarm will start ringing when you try to
remove the rechargeable battery cover.
ꢀ
Remove the screw from the rechargeable battery cover
and open the cover.
ꢁ
Pull out the battery connector and remove the battery.
4
Install new battery and plug the connector into the
socket.
Install the battery, then put back the battery cover
and secure it with the screw.
5
Note: The battery connector has polarity. Observe
battery polarity when installing.
Put back the battery cover and secure it with the screw.
Caution: Tighten the screw securely. If you fail to do
6
so, the alarm will not operate. Do not use any
other screws. This may cause damage to the
projector.
✔Note:
• The PIN code and settings you have changed are effective even after
the battery is changed.
• Unplug the battery connector if you carry your projector frequently
and use the carrying case. If you do not unplug the battery connector,
the alarm may be triggered when the Alarm buttons are accidentally
pressed inside the carrying case.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Antitheft Alarm Function
SAFETY PrEcAuTionS For SAnYo ni-MH BATTErY PAcK
Observe the following precautions when handling the built-in battery pack of the projector:
● MAKE SURE THAT THE BATTERY PACK IS INSTALLED IN THE PROJECTOR WHEN
RECHARGING. USING THE CHARGERS OTHER THAN THE PROJECTOR MAY CAUSE
EXPLOSION OR A FIRE.
● The rechargeable battery pack is for use exclusively with this projector. Do not use in other products or
this may cause accident.
● Do not throw the battery into fire or heat it. Doing so may cause an explosion or fire.
● Never attempt to disassemble, modify, reconstruct, or solder lead wires directly on to the battery.
● Do not drop or subject to strong forces. Doing so may cause the battery to leak fluid or explode.
● Do not expose to direct sunlight or high temperatures. This may degrade battery performance or cause
leakage.
● Avoid contact with water or liquid. Exposure to water or liquid could result in battery corrosion or
damage.
● Keep out of reach of children. They may accidentally swallow the battery.
● Do not short-circuit battery terminals with metal objects. Do not store with metal objects or in a metal
case.
● The rechargeable battery pack has a limited number of charge cycles and eventually need to be
replaced. If it can no longer be recharged, stop charging immediately and replace it with new one.
● Recharge the battery in a place where the temperature is always between 32˚F to 104˚F (0˚C to 40˚C).
Charging in the temperature out of this range may result in fluid leak, heat generation, or shortening
battery life.
● If you do not use the projector or the Antitheft alarm function for a long period of time, remove the
battery from the projector and store it in a place where the temperature is always between –4˚F to 86˚F
(–20˚C to 30˚C).
● If a battery leaks and fluid comes in contact with skin, this may cause skin irritation. Flush the affected
area thoroughly with water.
● If a battery leaks and fluid gets in contact with eyes, wash your eyes with water immediately and seek
medical attention.
● Dispose of used batteries according to your local disposal rule and guidelines.
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance and Cleaning
Warning Indicator
The WARNING indicator shows the state of the function which protects the projector. Check the state of the
WARNING indicator and the POWER indicator to take proper maintenance.
The projector is shut down and the WARNING
Top Control
indicator is blinking red
WARNING
blinking red
When the temperature inside the projector reaches a
certain level, the projector will be automatically shut down to
protect the inside of the projector. The POWER indicator is
blinking while the projector is being cooled down. When the
projector has cooled down enough (to its normal operating
temperature), it can be turned on again by pressing the
POWER ON/STAND-BY button.
✔Note:
• The WARNING indicator continues to blink even after
the temperature inside the projector returns to normal.
When the projector is turned on again, the WARNING
indicator stops blinking.
Then check the matters below:
– Did you provide appropriate space for the projector to be
ventilated? Check the installing condition to see if the air
vents of the projector are not blocked.
– Has the projector been installed near an Air-Conditioning/
Heating Duct or Vent? Move the installation of the
projector away from the duct or vent.
– Is the filter clean? Clean the filter periodically.
The projector is shut down and the WARNING
Top Control
indicator lights red
WARNING
emit a red light
When the projector detects an abnormal condition, it is
automatically shut down to protect the inside of the projector
and the WARNING indicator lights red. In this case, unplug
the AC power cord and reconnect it, and then turn the
projector on once again to verify operation. If the projector
cannot be turned on and the WARNING indicator still lights
red, unplug the AC power cord and contact the service
station.
CAUTION
DO NOT LEAVE THE PROJECTOR WITH THE
AC POWER CORD CONNECTED UNDER AN
ABNORMAL CONDITION. IT MAY RESULT IN
FIRE OR ELECTRIC SHOCK.
6ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance and Cleaning
Cleaning the Filter
Filter prevents dust from accumulating on the optical elements inside the projector. Should the filter become
clogged with dust particles, it will reduce cooling fans’ effectiveness and may result in internal heat buildup
and adversely affect the life of the projector. If a “Filter warning” icon appears on the screen, clean the filter
immediately. Clean the filter by following the steps below.
Turn off the projector, and unplug the AC power cord
from the AC outlet.
1
Turn the projector over and remove the filter by pulling
the latches upward.
ꢀ
Gently clean the filter by using a brush or rinse it softly.
ꢁ
When rinsing the filter, dry it well. Replace the filter
properly. Make sure that the filter is fully inserted to the
projector.
4
CAUTION
Do not operate the projector with the filter removed.
Dust may accumulate on the optical elements
degrading picture quality.
Filter
Pull up and remove.
Do not put anything into the air vents. Doing so
may result in malfunction of the projector.
✔Note:
• When reinserting this filter, be sure that
the slit part is facing the outer side.
RECOMMENDATION
We recommend avoiding dusty/smoky environments
when you operate the projector Usage in these
environments may cause poor image quality
When using the projector under dusty or smoky conditions,
dust may accumulate on a lens, LCD panels, or optical
elements inside the projector degrading the quality of a
projected image. When the symptoms above are noticed,
contact your authorized dealer or service station for proper
cleaning.
Resetting the Filter Counter
Be sure to reset the Filter counter after cleaning or replacing the filters.
Press the MENU button to display the On-Screen
Menu. Use the Point 7 8 buttons to move the red
frame pointer to the Setting Menu icon.
Filter counter
1
ꢀ
Use the Point ed buttons to move the red frame
pointer to Filter counter and then press the SELECT
button. A dialog box appears showing the total
accumulated time of the filter use, a timer setting
option, and the reset option. Select Reset and the
“Filter counter Reset?” appears. Select [Yes] to
continue.
Select Reset and the “Filter
counter Reset?” appears.
Select [Yes],
then another
confirmation
box appears.
Another confirmation dialog box appears, select [Yes]
to reset the Filter counter.
ꢁ
Select [Yes] again to reset
the Filter counter.
6ꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance and Cleaning
Slide Shutter
Slide Shutter is provided to protect the surface of the lens
against scratches and dirt. When you are not using the
projector, close the Slide Shutter.
To open or close, slide the Slide Shutter on the front of the
cabinet.
Do not close the shutter when the projection lamp is on.
Slide Shutter
Cleaning the Projection Lens
Unplug the AC power cord before cleaning.
Gently wipe the projection lens with a cleaning cloth that
contains a small amount of non-abrasive camera lens
cleaner, or use a lens cleaning paper or commercially
available air blower to clean the lens.
Avoid using an excessive amount of cleaner. Abrasive
cleaners, solvents, or other harsh chemicals might scratch
the surface of the lens.
Cleaning the Projector Cabinet
Unplug the AC power cord before cleaning.
Gently wipe the projector body with a soft dry cleaning cloth.
When the cabinet is heavily soiled, use a small amount of
mild detergent and finish with a soft dry cleaning cloth. Avoid
using an excessive amount of cleaner. Abrasive cleaners,
solvents, or other harsh chemicals might scratch the surface
of the cabinet.
When the projector is not in use, put the projector in
an appropriate carrying case to protect it from dust and
scratches.
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance and Cleaning
Lamp Replacement
When the projection lamp of the projector reaches its end of
life, the Lamp replacement icon appears on the screen and
LAMP REPLACE indicator lights yellow. Replace the lamp with
a new one promptly. The timing when the LAMP REPLACE
indicator should light is depending on the lamp mode.
Top Control
LAMP REPLACE
indicator
WARNING:
TURN OFF THE UV LAMP BEFORE
OPENING THE LAMP COVER
Lamp replacement icon
✔Note:
• The Lamp replacement icon will not appear when the
Display function is set to “Off” (p.48), during “Freeze”
(p.28), or “No show” (p.29).
CAUTION
CAUTION
Allow a projector to cool for at least 45 minutes
before you open the Lamp cover. The inside of the
projector can become very hot.
For continued safety, replace with a lamp of the
same type. Do not drop a lamp or touch a glass
bulb! The glass can shatter and may cause injury.
Press here and pull upward.
Lamp Cover
Follow these steps to replace the lamp.
Turn off the projector and unplug the AC power cord.
Let the projector cool for at least 45 minutes.
1
Screw
Remove the screw and open the lamp cover.
ꢀ
Remove the two (2) screws that secure the lamp. Lift
the lamp out of the projector by using the handle.
ꢁ
Screw
Handle
Replace the lamp with a new one and secure the two
(2) screws. Make sure that the lamp is set properly.
Close the lamp cover and secure the screw.
4
Screw
Connect the AC power cord to the projector and turn
on the projector.
5
Reset the lamp counter
See “Resetting the Lamp Counter” on the next page.
6
Lamp
ORDER REPLACEMENT LAMP
Replacement lamp can be ordered through your dealer. When ordering a projection lamp, give the following
information to the dealer.
● Model No of your projector
● Replacement Lamp Type No
: LC-WB40N
: POA-LMP111
(Service Parts No. 610 333 9740)
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance and Cleaning
Resetting the Lamp Counter
Be sure to reset the Lamp counter after the lamp is replaced. When the Lamp counter is reset, the LAMP
REPLACE indicator stops lighting and the Lamp replacement icon disappears.
Press the MENU button to display the On-Screen
Menu. Use the Point 7 8 buttons to move the red
frame pointer to the Setting Menu icon.
1
Use the Point ed buttons to move the red frame
pointer to Lamp counter and then press the SELECT
button. A dialog box appears showing the total
accumulated time of the lamp usage and the reset
option. Select Reset and the “Lamp replacement
counter Reset?” appears. Select [Yes] to continue.
ꢀ
Select Reset and the
“Lamp replacement counter
Reset?” appears.
Another confirmation dialog box appears, select [Yes]
to reset the Lamp counter.
ꢁ
Select [Yes],
then another
confirmation
box appears.
✔Note:
• Do not reset the Lamp counter without implementing
lamp replacement. Be sure to reset the Lamp counter
only after replacing the lamp.
Select [Yes] again to reset the
Lamp counter.
LAMP HANDLING PRECAUTIONS
This projector uses a high-pressure lamp which must be handled carefully and properly.
Improper handling may result in accidents, injury, or create a fire hazard.
● Lamp life may differ from lamp to lamp and according to the environment of use. There is no guarantee
of the same life for each lamp. Some lamps may fail or terminate their life in a shorter period of time
than other similar lamps.
● If the projector indicates that the lamp should be replaced, i.e., if the LAMP REPLACE indicator lights
up, replace the lamp with a new one IMMEDIATELY after the projector has cooled down.
(Follow carefully the instructions in the Lamp Replacement section of this manual.) Continuous use of
the lamp with the LAMP REPLACE indicator lighted may increase the risk of lamp explosion.
● A Lamp may explode as a result of vibration, shock or degradation as a result of hours of use as its
lifetime draws to an end. Risk of explosion may differ according to the environment or conditions in
which the projector and lamp are being used.
IF A LAMP EXPLODES, THE FOLLOWING SAFETy PRECAUTIONS SHOULD BE TAKEN
If a lamp explodes, disconnect the projector’s AC plug from the AC outlet immediately. Contact an
authorized service station for a checkup of the unit and replacement of the lamp. Additionally, check
carefully to ensure that there are no broken shards or pieces of glass around the projector or coming out
from the cooling air circulation holes. Any broken shards found should be cleaned up carefully. No one
should check the inside of the projector except those who are authorized trained technicians and who
are familiar with projector service. Inappropriate attempts to service the unit by anyone, especially those
who are not appropriately trained to do so, may result in an accident or injury caused by pieces of broken
glass.
66
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Troubleshooting
Before calling your dealer or service center for assistance, check the items below once again.
–Make sure you have properly connected the projector to peripheral equipment as described on pages 19–21.
–Make sure all equipment is connected to AC outlet and the power is turned on.
–When the projector does not project an image from the connected computer, restart the computer.
Problem:
– Solutions
No power
– Plug the power cord of the projector into the AC outlet.
– See if the POWER indicator lights red.
– Wait until the POWER indicator stops blinking to turn on the projector
again. The projector can be turned on after the POWER indicator
turns red. See page 22.
– Check the WARNING indicator. If the WARNING indicator lights red,
projector cannot be turned on. See page 62.
– Check the projection lamp. See page 65.
– Unlock the Key lock function for the projector. See page 54.
The initial display is not shown
– Make sure "User" or "Countdown off" are not chosen at display
function.(see page 48)
The initial display is not same
as the default set
– Make sure "User" or "Countdown off" are not chosen at Logo (select)
function.(see page 49)
Input signal switches automatically – Make sure Input search function is adjusted properly. See page 51.
(or does not switch automatically)
When the projector is on and you
press the input button, an icon
other than the Lamp mode icon
appears.
– That is the Filter warning icon. Refer to page 57.
An icon other than Input mode or
Lamp mode icon appears
– That is the Lamp replacement icon or the Filter warning icon. See
page 56 or 57.
Image is out of focus
– Adjust focus of the projector. See page 26.
– Provide proper distance between the projector and the projection
screen. See page 17.
– Check the projection lens to see if it needs cleaning. See page 64.
– Moving the projector from a cool to warm place may result in
moisture condensation on the projection lens. In such cases, leave
the projector off and wait until condensation evaporates.
Image is Left/Right reversed
Image is Top/Bottom reversed
– Check the Ceiling/Rear function. See page 51.
– Check the Ceiling function. See page 51.
Picture is not bright enough
– Check if the 'Contrast" or "Brightness" are adjusted properly.(see
page 37,44)
– Check if "Image mode" is selected properly.(see page 36,43)
– Check the lamp control function.(see page 28)
– Check the LAMP REPLACE indicator. If it lights, the end of lamp life
is approaching. Replace the lamp with a new one promptly.(see page
65)
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
No image
– Check the connection between your computer or video equipment
and the projector. See pages 19-21.
– See if the input signal is correctly output from your computer. Some
laptop computers may need to change the setting for monitor output
when connecting to a projector. See your computer’s instruction
manual for the setting.
– It takes about 30 seconds to display an image after turning on the
projector. See page 22.
– Check the Input singal, color system, video system or computer
system mode.
– Make sure the temperature is not out of the specified Operating
Temperature (41˚F–95˚F [5˚C–35˚C]).
– When "No Show" is operating, the image cannot be displayed. Press
the NO SHOW button or any other button on the remote control.
No sound
– Check the audio cable connection from audio input source.
– Adjust the audio source.
– Press the Volume + button. See page 27.
– Press the Mute button. See page 27.
– When the AUDIO OUT is plugged-in, the projector's built-in speaker
is not available
– Is the image projected? You will hear the sound only when the image
is projected.
The color is strange
– Check the Input signal, color system,video system or computer
system mode.
– Make sure the "Blackboard" is not selected on Image select
menu.(see page 36,43)
Some displays are not seen
during the operation
– Check the Display function. See page 48.
Auto PC adjustment function
does not work
– Check the Input signal. Auto PC function can not work when
480p,575p.720p,480i,575i,1035i or 1080i is selected or when the
digital signal is input into DVI terminal.(see Page 34)
– The icon is not available in grayout when the digital signal is input.
The setting does not remain
after turning off power
– Make sure you selected "Store" after adjusting setting. Some settings
can not be stored if not registered with "Store".(see page 45)
Power management does
work
– Power management function can not work while "Freeze" or "No
Show" function is running.(see page 52)
Capture function does not work
– Check the connection and the input signal to see if there is signal.
Auto setup does not work properly – Make sure "Off" is not selected at the Auto setup function.(see page
47)
– Make sure "On" is not selected at the Ceiling funtion.(see page 51)
Auto keystone function does not
work even when the projector is
tipped
– Make sure the Auto keystone function is not set to "Manual". Press
the AUTO SET UP button on the top control.(see page 26,47)
68
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
The image is distorted or runs off – Check "PC adjustment" menu or "Screen" menu and adjust them.
(page 33-34, 38-39)
PIN code dialog box appears
at start-up
– PIN code lock is being set. Enter a PIN code (the “1234” or numbers
you have set). See pages 22, 54–55.
Page Up/Down function does
not work
– Make sure your computer is connected to the projector with USB
cable.(see page 19)
– Check cable connection between the projector and your computer.
(see page 19)
The Remote Control does
not work
– Check the batteries.
– Make sure no obstruction is between the projector and remote
control.
– Make sure you are not too far from the projector when using the
remote control. Maximum operating range is 16.4'(5 m).
– Wireless reomete control does not work when the remote control
cable is connected to the projector.(see page 13)
– Make sure the code of the remote control is conformed to the
projector’s code. See page 53.
– Unlock the Key lock function for the remote control function. See
page 54.
– Check RESET/ON/ALL-OFF switch on the remote control is set to
“ON”. See page 15.
Alarm does not stop ringing
Indicator blinks or lights
– Connect the AC power cord to the AC outlet. (Alarm will not
stop ringing when the alarm goes off while trying to remove the
rechargeable battery cover.)
– Chek the status of the projector with referring to "Indicators and
projector Condition".(see page 73 )
– In the case of the ALARM indicator blinks, check the setting.(see
page 58)
Wireless Mouse function does
not work
– Check the connection between a projector and your computer.
– Check the mouse setting on you computer.
– Make sure the mouse driver is installed on your computer,
otherwise, the remote control can not be used as a wireless mouse.
– Make sure the signal is from the computer, otherwise, the remote
control can not be used as a wireless mouse.
– Turn on the projector before turning on the computer.
The exclamation mark appears
on the screen
– Your operation is invalid. Operate correctly.
Top control does not work
– The top control is not available if the top cotrol is locked at "Key lock"
under "Security" of SETTING section. Please check "SETTING"
section on page 54.
Uable to unlock the Logo PIN
code lock, Security key lock
or Security PIN code lock
– Contact the dealer where you purchased the projector or the service
center.
69
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Warning mode is not turned on
– If you cannot hear the bleeping sound when you press the Alarm
buttons, you are not pressing the buttons correctly. Try to set the
Alarm setting again.
WARNING :
High voltages are used to operate this projector Do not attempt to open the cabinet
If problems still persist after following all operating instructions, contact the dealer where you purchased the
projector or the service center. Specify the model number and explain about the problem. We will advise you
how to obtain service.
This symbol on the nameplate
The CE Mark is a Directive conformity
mark of the European Community (EC).
means the product is Listed
by Underwriters Laboratories
Inc. It is designed and
manufactured to meet rigid
U.L. safety standards against
risk of fire, casualty and
electrical hazards.
70
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Menu Tree
Computer Input/Video Input
Computer 1 (Analog)
Go to System (1)
Input
Computer 1 (Digital)
RGB (PC digital)
RGB (AV HDCP)
Quit
N/A
N/A
Computer 2
RGB
Go to System (1)
Go to System (2)
N/A
Component
RGB (Scart)
Quit
Video
Auto
Go to System (3)
Go to System (3)
Go to System (3)
Video
S-video
Quit
Wired
See owner’s manual “Network Set-up and Operation”
See owner’s manual “Network Set-up and Operation”
Wireless*
N/A........ not applicable
............ The menu will be displayed when connecting
device for the input source.
*
Sound
Volume
0–63
On/Off
Sound
Mute
Quit
Computer Input
SVGA 1
Dynamic
System (1)
Image Select
Mode 1
Mode 2
- - - -
Standard
Real
Blackboard (Green)
Image 1
✽Systems displayed in the System Menu vary
depending on an input signal.
Image 2
Image 3
Image 4
Contrast
0–63
Image Adjust
Brightness
Color temp.
0–63
High
Auto PC Adj.
PC Adjust
Mid
Fine sync
Total dots
Horizontal
Vertical
0–31
Low
XLow
Adj.
Red
0–63
Current mode
Clamp
H-sync freq.
V-sync freq.
Quit
Green
Blue
0–63
0–63
0–15
Sharpness
Gamma
Reset
Display area H
Display area V
Reset
0–15
Yes/No
Image 1
Image 2
Image 3
Image 4
Quit
Yes/No
Mode 1
Mode 2
Mode 3
Mode 4
Mode 5
Quit
Store
Mode free
Quit
Store
Mode 1
Mode 2
Mode 3
Mode 4
Mode 5
Quit
Normal
True
Screen
Full
Custom
Scale
H&V
H/V
H/V
Position
Yes/No
Yes/No
Quit
Common
Reset
Quit
Digital zoom +
Digital zoom –
71
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Video Input
Setting
Auto
1080i
1035i
720p
575p
480p
575i
Setting
Language
Auto setup
16 languages provided.
Quit
System (2)
Auto PC adj.
On/Off
Auto keystone
Auto
Manual
480i
Off
Keystone
Blue back
Display
Logo
Store/Reset
On/Off
Auto
System (3)
PAL
On/Countdown off/Off
Logo select
Off
SECAM
NTSC
NTSC 4.43
PAL-M
PAL-N
Default
User
Capture
Yes/No
Logo PIN code lock
Off/On
Dynamic
Standard
Cinema
Image Select
Logo PIN code change
Quit
Quit
On/Off
Blackboard (Green)
Ceiling
Image 1
Image 2
Image 3
Image 4
Rear
Input search
On/Off
Off/On1/On2
Eco/Normal
Off
Standby mode
Power management
Ready
Shut down
Timer (1–30 Min.)
Quit
Contrast
Brightness
Color
0–63
0–63
0–63
0–63
High
Mid
Image Adjust
On start
On/Off
Lamp control
Pointer
Normal/Auto/Eco
Spotlight/Pointer
Quit
Tint
Color temp.
Remote control
Security
Code 1–Code 8
Key lock
Low
XLow
Adj.
0–63
0–63
0–63
0–15
0–15
Off
Off
Projector
Remote control
Quit
Red
Green
PIN code lock
Blue
Off/On1/On2
PIN code change
Quit
Sharpness
Gamma
Noise reduction
Alarm
L1
Off
L2
Battery charge
Alarm volume
Sensitivity
Ring time
Quit
Off/Auto
Small/Medium/Large
Progressive
Off
L1
Low/Medium/High
10 seconds/60
L2
seconds/Long time
Film
On
Reset
Store
Yes/No
Image 1
Image 2
Image 3
Image 4
Quit
Quit
Fan
L1/L2
Fan control
Warning log
Lamp counter
Normal/Max
Hour(s)
Reset
Quit
Yes/No
Quit
Filter counter
Hour(s)
Normal
Screen
Off/100H/200H/300H
Zoom
Natural wide
Custom
Reset
Quit
Yes/No
Scale
H/V
H/V
Factory default
Quit
Yes/No
H&V
Position
Yes/No
Yes/No
Common
Reset
Quit
7ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Indicators and Projector Condition
Check the indicators for projector condition.
For Alarm indicator, see page 58.
Indicators
Projector Condition
LAMP
REPLACE
yellow
WARNING
red
POWER
red/green
The projector is off. (The AC power cord is unplugged.)
The projector is in stand-by mode. Press the POWER ON/STAND-
BY button to turn on the projector.
✽
✽
The projector is operating normally.
The projector is preparing for stand-by or the projection lamp is
being cooled down. The projector cannot be turned on until cooling
is completed and the POWER indicator stops blinking.
✽
✽
The projector is in the Power management mode.
The temperature inside the projector is abnormally high. The
projector cannot be turned on. When the projector is cooled down
enough and the temperature returns to normal, the POWER
indicator stops blinking and the projector can be turned on. (The
WARNING indicator keeps blinking.) Check and clean the filter.
✽
✽
The projector has been cooled down enough and the temperature
returns to normal. When turning on the projector, the WARNING
indicator stops blinking. Check and clean the air filter.
The projector detects an abnormal condition and cannot be turned
on. Unplug the AC power cord and plug it again to turn on the
projector. If the projector is turned off again, unplug the AC power
cord and contact the dealer or the service center for service and
checkup. Do not leave the projector on. It may cause an electric
shock or a fire hazard.
✽
• • • green.
• • • blinks green.
• • • red
• • • off
• • • blinks red.
When the projection lamp reaches its end of life, the LAMP REPLACE indicator lights yellow. When this indicator
lights yellow, replace the projection lamp with a new one promptly. Reset the lamp replacement counter after
replacing the lamp. See pages 65-66.
7ꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Compatible Computer Specifications
Basically this projector can accept the signal from all computers with the V-, H-Frequency mentioned below
and less than 140 MHz of Dot Clock for analog signal and 110 MHz of Dot Clock for digital signal.
When selecting these modes, PC adjustment can be limited.
ON-SCREEN
DISPLAy
VGA 1
H-Freq
(KHz)
31.47
V-Freq
(Hz)
ON-SCREEN
DISPLAy
SXGA 1
H-Freq
(KHz)
64.20
V-Freq
(Hz)
RESOLUTION
RESOLUTION
640 x 480
720 x 400
640 x 400
640 x 480
640 x 480
640 x 480
640 x 480
640 x 480
640 x 480
640 x 480
59.88
1152 x 864
1280 x 1024
1280 x 1024
1280 x 1024
1280 x 1024
1280 x 1024
1280 x 1024
1280 x 1024
1280 x 1024
1280 x 960
1152 x 900
1152 x 900
1280 x 1024
1280 x 1024
1280 x 1024
1280 x 1024
1152 x 900
1280 x 1024
1280 x 1024
1280 x 1024
1400 x 1050
1400 x 1050
1400 x 1050
1152 x 870
1280 x 960
1280 x 1024
1366 x 768
1360 x 768
1376 x 768
1360 x 768
1280 x 768
1280 x 768
1280 x 768
1280 x 800
1600 x 1200
1600 x 1200
1600 x 1200
1600 x 1200
1280 x 720
1280 x 720
1920 x 1035
1920 x 1080
1920 x 1080
70.40
VGA 2
VGA 3
31.47
31.47
37.86
37.86
37.50
43.269
34.97
35.00
31.47
31.25
15.734
15.625
35.156
37.88
46.875
53.674
48.08
37.90
34.50
38.00
38.60
32.70
38.00
49.72
70.09
70.09
74.38
72.81
75.00
85.00
66.60
66.67
59.88
50.00
SXGA 2
SXGA 3
SXGA 4
SXGA 5
SXGA 6
SXGA 7
SXGA 8
SXGA 9
SXGA 10
SXGA 11
SXGA 12
SXGA 13
SXGA 14
SXGA 15
SXGA 16
SXGA 17
SXGA 18
SXGA 19
SXGA 20
SXGA+ 1
SXGA+ 2
SXGA+ 3
MAC21
MAC
62.50
63.90
63.34
63.74
71.69
81.13
63.98
79.976
60.00
61.20
71.40
50.00
50.00
63.37
76.97
61.85
46.43
63.79
91.146
63.97
65.35
65.12
68.68
75.00
80.00
48.36
47.70
48.36
56.16
47.776
60.289
68.633
49.60
75.00
81.25
87.5
58.60
60.00
59.98
60.01
67.19
76.107
60.02
75.025
60.00
65.20
75.60
VGA 4
VGA 5
VGA 6
VGA 7
MAC LC13
MAC 13
480p
575p
768 x 575
––––––––
60.00
(Interlace)
480i
50.00
(Interlace)
86.00
(Interlace)
––––––––
575i
94.00
(Interlace)
SVGA 1
SVGA 2
SVGA 3
SVGA 4
SVGA 5
SVGA 6
SVGA 7
SVGA 8
SVGA 9
SVGA 10
SVGA 11
MAC 16
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
832 x 624
56.25
60.32
75.00
85.06
72.19
61.03
55.38
60.51
60.31
51.09
60.51
74.55
60.01
72.00
66.00
86.70
(Interlace)
60.18
85.024
60.19
60.12
59.90
75.06
75.08
75.08
60.00
60.00
60.00
72.00
59.87
74.893
84.837
60.05
60.00
65.00
70.00
75.00
60.00
50.00
MAC 19
XGA 1
1024 x 768
1024 x 768
60.24
48.36
75.08
60.00
MAC
WXGA 1
WXGA 2
WXGA 3
WXGA 4
WXGA 6
WXGA 7
WXGA 8
WXGA 9
UXGA 1
UXGA 2
UXGA 3
UXGA 4
720p
XGA 2
XGA 3
XGA 4
XGA 5
XGA 6
XGA 7
XGA 8
XGA 9
XGA 10
XGA 11
XGA 12
XGA 13
XGA 14
XGA 15
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
68.677
60.023
56.476
60.31
48.50
44.00
63.48
36.00
62.04
61.00
35.522
46.90
47.00
58.03
84.997
75.03
70.07
74.92
60.02
54.58
79.35
87.17
(Interlace)
77.07
75.70
86.96
(Interlace)
93.75
37.50
37.50
33.75
33.75
28.125
58.20
58.30
72.00
720p
60.00
(Interlace)
1035i
60.00
(Interlace)
1080i
50.00
(Interlace)
1080i
74
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
When the input signal is digital from DVI terminal, refer to the chart below.
ON-SCREEN
DISPLAy
D-VGA
H-Freq
(KHz)
31.47
V-Freq
(Hz)
ON-SCREEN
DISPLAy
H-Freq
(KHz)
63.98
V-Freq
(Hz)
RESOLUTION
RESOLUTION
640 x 480
640 x 480
768 x 575
800 x 600
1024 x 768
1366 x 768
1360 x 768
1376 x 768
1360 x 768
1366 x 768
1280 x 768
1280 x 768
1280 x 800
59.94
D-SXGA1
1280 x 1024
1280 x 1024
1400 x 1050
1280 x 720
1280 x 720
1920 x 1035
1920 x 1080
1920 x 1080
60.02
D-480p
D-575p
31.47
31.25
59.88
50.00
D-SXGA2
D-SXGA+1
D-720p
60.276
63.97
37.50
45.00
33.75
33.75
28.125
58.069
60.19
50.00
60.00
D-SVGA
37.879
43.363
48.36
60.32
D-720p50
D-720p60
D-XGA
60.00
D-720p
60.00
(Interlace)
D-WXGA 1
D-WXGA 2
D-WXGA 3
D-WXGA 4
D-WXGA 5
D-WXGA 6
D-WXGA 7
D-WXGA 9
60.00
D-1035i
D-1080i
D-1080i
60.00
(Interlace)
47.7
60.00
D-1080i60
D-1080i50
50.00
(Interlace)
48.36
60.00
56.160
46.500
47.776
60.289
49.600
72.000
50.000
59.870
74.893
60.050
✔Note:
• When the input signal is D-SXGA 1, D-SXGA 2, or D-SXGA+1, images may not be displayed properly
depending on computers.
• The specifications are subject to change without notice.
75
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Technical Specifications
Mechanical Information
Projector Type
Multi-media Projector
Dimensions (W x H x D)
Net Weight
334mm x 78mm x 262mm (Not including adjustable feet)
3.7 kg
Feet Adjustment
0˚ to 8.9˚
Panel Resolution
LCD Panel System
Panel Resolution
0.74” TFT Active Matrix type, 3 panels
1,280 x 800 dots
Number of Pixels
3,072,000 (1,280 x 800 x 3 panels)
Signal Compatibility
Color System
PAL, SECAM, NTSC, NTSC4.43, PAL-M, and PAL-N
480i, 480p, 575i, 575p, 720p, 1035i, and 1080i
H-sync. 15 kHz–100 kHz, V-sync. 50–100 Hz
High Definition TV Signal
Scanning Frequency
Optical Information
Projection Image Size (Diagonal)
Throw Distance
Adjustable from 40” to 300”
3.3'(1.0) m –39.7'(12.1m)
Projection Lens
F1.7–2.5 lens with f=19.2 mm–30.2 mm with manual zoom and focus
Projection Lamp
275 W
Interface
Video Input Jack
RCA Type x 1
S-video Input Jack
Mini DIN 4 pin x 1
RCA Type x 2
Audio Input Jacks
Computer Input 1/DVI-I Input Terminal
DVI-I Terminal X 1
Computer Input 2 /Component Input Terminal Mini D-sub 15 pin x 1
Monitor Output Terminal
Computer/Component Audio Input Jack
Service Port Connector
USB Connector
Mini D-sub 15 pin x 1
Mini Jack (stereo) x 1
Mini DIN 8 pin x 1
USB Series B connector x 1
Mini Jack (stereo) x 1 (variable)
100 Base-TX (100Mbps)/10 Base-T (10Mbps), RJ45
Audio Output Jack
LAN Connection Terminal
SD Card Slot
Audio
Internal Audio Amp
1.0 W RMS
Built-in Speaker
1 speaker, ø28 mm
Power
Voltage and Power Consumption
AC 100–120 V (4.0A Max. Ampere), 50/60 Hz (The U.S.A and Canada)
AC 200–240 V (2.0A Max. Ampere), 50/60 Hz (Continental Europe and The U.K.)
Operating Environment
Operating Temperature
Storage Temperature
41˚F–95˚F (5 ˚C–35 ˚C)
14˚F–140˚F (-10˚C–60 ˚C)
Remote Control
Battery
AAA or LR03 Type x 2
5 m/±30˚
Operating Range
Dimensions
45 mm (W) x 23 mm (H) x 145 mm (D)
99 g (including batteries)
Net Weight
Laser Pointer
Class II Laser (Max. Output: 1 mW/Wave length: 640–660 nm)
76
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Accessories
Owner’s Manual
Quick Reference Guide
AC Power Cord
Remote Control and Batteries
VGA Cable
Remote Control Cable
PIN Code Label
Alarm Label
Network Application (CD-ROM)
Soft Carrying Case
Control Cable for Serial Port
● The specifications are subject to change without notice.
● LCD panels are manufactured to the highest possible standards. Even though 99.99% of the pixels are
effective, a tiny fraction of the pixels (0.01% or less) may be ineffective by the characteristics of the LCD
panels.
Optional Parts
The parts listed below are optionally available. When ordering those parts, specify the item name and Model No.
to the sales dealer.
Model No.
COMPONENT~VGA Cable
SCART~VGA Cable
: AH-98771
: AH-98881
MAC/VGA Adaptor
: AT-72011
77
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Pj Link Notice
This projector is compliant with PJLink Standard Class 1 of JBMIA (Japan Business Machine and Information
System Industries Association). This projector supports all commands defined by PJLink Class 1 and is verified
conformance with PJLink Standard Class 1.
For PJ Link password, see page 49 on the owner’s manual “Network Set-up and Operation.”
Projector Input
PJLink Input
RGB 1
Parameter
Computer1 (Analog)
11
31
32
12
13
14
21
22
23
51
52
41
RGB (PC digital)
DIGITAL 1
DIGITAL 2
RGB 2
Computer1
(Digital)
RGB (AV HDCP)
RGB
Component
RGB (Scart)
Auto
RGB 3
Computer2
Video
RGB 4
VIDEO 1
VIDEO 2
VIDEO 3
NETWORK 1
NETWORK 2
STORAGE 1
Video
S-video
Wired
Wireless
Memory viewer
PJLink is a registered trademark of JBMIA and pending trademark in some countries.
78
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Configurations of Terminals
COMPUTER IN ꢀ /COMPONENT IN /MONITOR OUT (ANALOG)
Terminal: Analog RGB (Mini D-sub 15 pin)
Red (R/Cr) Input/Output
Green (G/Y) Input/Output
Blue (B/Cb) Input/Output
1
ꢀ
ꢁ
4
5
6
7
8
9
+5V Power
Ground (Vert.sync.)
Ground
2
1
5
4
3
10
11
10
9
8
7
6
15
12
11
14
13
-----
Ground (Horiz.sync.)
Ground (Red)
1ꢀ DDC Data
Horiz. sync. Input/Output (Composite H/V sync.)
1ꢁ
14
Vert. sync.
Ground (Green)
Ground (Blue)
15 DDC Clock
DVI-I TERMINAL (DIGITAL/ANALOG)
Analog Red Input
C1 C2
C1
Analog Green Input
Analog Blue Input
Analog Horiz. sync
Analog Ground (R/G/B)
Cꢀ
Cꢁ
C4
C5
1
9
2
3
4
5
6
7
8
10 11 12 13 14 15 16
17 18 19 20 21 22 23 24
T.M.D.S. Data2–
T.M.D.S. Data2+
T.M.D.S. Data2 Shield
No Connect
T.M.D.S. Data1–
T.M.D.S. Data0–
T.M.D.S. Data0+
1
ꢀ
ꢁ
4
5
6
7
8
9
17
18
19
ꢀ0
ꢀ1
ꢀꢀ
ꢀꢁ
ꢀ4
T.M.D.S. Data1+
T.M.D.S. Data1 Shield
No Connect
10
11
1ꢀ
1ꢁ
14
15
16
C3 C4
C5
T.M.D.S. Data0 Shield
No Connect
No Connect
No Connect
No Connect
DDC Clock
+5V Power
T.M.D.S. Clock Shield
T.M.D.S. Clock+
T.M.D.S. Clock–
DDC Data
Ground (for +5V)
Hot Plug Detect
Analog Vert. sync
USB CONNECTOR (Series B)
1
Vcc
2
3
1
4
ꢀ
ꢁ
4
- Data
+ Data
Ground
LAN TERMINAL
1
ꢀ
ꢁ
4
TX +
TX –
RX +
-----
5
6
7
8
-----
RX –
-----
-----
87654321
SERVICE PORT CONNECTOR
Terminal : Mini DIN 8-PIN
1
ꢀ
R X D
-----
5
6
7
8
RTS/CTS
T X D
8
7
6
5
4
3
ꢁ
4
-----
GND
2
1
GND
GND
79
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
PIN Code Number Memo
Write down the PIN code number in the column below and keep it with this manual securely. If you forgot or lost
the number and unable to operate the projector, contact the service station.
PIN Code Lock No
Factory default set No: 1 2 3 4*
Logo PIN Code Lock No
Factory default set No: 4 3 2 1*
Alarm PIN Code No
Factory default set No: 1 1 1 1*
*Should the four-digit number be changed,
the factory set number will be invalid.
While the projector is locked with the PIN code.
Put the label below (supplied) on in a prominent place of the
projector's body while it is locked with a PIN code.
While the Antitheft alarm function is set....
Put the label below (supplied) on in a prominent place of the
projector’s body while the Antitheft alarm function is set.
80
Download from Www.Somanuals.com. All Manuals Search And Download.
U.S.A.
EIKI International, Inc.
30251 Esperanza
Rancho Santa Margarita
CA 92688-2132 U.S.A.
Tel: 800-242-3454 (949)-457-0200
Fax: 800-457-3454 (949)-457-7878
E-Mail : [email protected]
Canada
EIKI CANADA - Eiki International, Inc.
P.O. Box 156, 310 First St. - Unit 2,
Midland, ON, L4R 4K8, Canada
Tel : 800-563-3454 (705)-527-4084
Fax : 800-567-4069 (705)-527-4087
E-Mail : [email protected]
Eastern Europe
EIKI CZECH spol. s.r.o.Umelecká 15
170 00 Praha 7
Czech Republic
Tel : +42 02 20570024
+42 02 20571413
Fax : +42 02 20571411
E-Mail : [email protected]
Deutschland & Österreich
EIKI Deutschland GmbH Am
Frauwald 12 65510 Idstein
Deutschland
Tel: 06126-9371-0
Fax: 06126-9371-14
E-Mail : [email protected]
ˇ
China
Japan & Worldwide
EIKI Industrial Company Limited.
4-12 Banzai-Cho, Kita-Ku, Osaka,
530-0028 Japan
Tel : +81-6-6311-9479
Fax : +81-6-6311-8486
EIKI (Shanghai) Co.,LTD
1.Dapu Road, Golden Magnolia
Plaza #2109 Shanghai,
200023 China
Tel : 86-21-5396-0088
Fax : 86-21-5396-0318
E-Mail : [email protected]
©2007 Eiki International, Inc.
KB3BC
Download from Www.Somanuals.com. All Manuals Search And Download.
|