EW-7438RPn Air
User Manual
02-2014 / v1.0
Download from Www.Somanuals.com. All Manuals Search And Download.
Windows XP.................................................................................................................51
How to Find Your Router’s IP Address.........................................................................71
Download from Www.Somanuals.com. All Manuals Search And Download.
I. Product Information
I-1. Package Contents
- EW-7438RPn Air
- CD with multi-language QIG & user manual
- Quick installation guide (QIG)
- Access key card
I-2. System Requirements
- Existing 2.4GHz wireless network
- Computer with 2.4GHz 802.11/b/g/n Wi-Fi adapter, and web browser for
software configuration (Internet Explorer 8® or above, Google Chrome®,
Firefox® or Safari® latest version)
- iOS 5 or above or Android 4.x or above for mobile app
I-3. LED Status
Color
Blue
Status
On
Description
Good signal strength:
60 – 100%
Normal signal strength:
Flashing
Flashing
On
40 – 59%
Poor signal strength:
Amber
Red
0 – 39%
Disconnected
Flashing
On
Extender is booting up
Successful WPS connection
Green
1
Download from Www.Somanuals.com. All Manuals Search And Download.
I-5. Safety Information
In order to ensure the safe operation of the device and its users, please read
and act in accordance with the following safety instructions.
1. The device is designed for indoor use only; do not place it outdoors.
2. Do not place the device in or near hot/humid places, such as a kitchen or
bathroom.
4. Handle the device with care. Accidental damage will void the warranty of
the device.
5. The device contains small parts which are a danger to small children under
3 years old. Please keep the device out of reach of children.
6. Do not place the device on paper, cloth, or other flammable materials. The
device may become hot during use.
7. There are no user-serviceable parts inside the device. If you experience
problems with the device, please contact your dealer of purchase and ask
for help.
8. The device is an electrical device and as such, if it becomes wet for any
reason, do not attempt to touch it without switching the power supply off.
Contact an experienced electrical technician for further help.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
II. Installation
II-1. Installation
1. Plug the EW-7438RPn Air into a power socket. The LED will flash red while
the system is booting up. The device is ready when the LED displays on
(red).
2. Use a Wi-Fi device (e.g. computer, tablet, smartphone) to search for a
Wi-Fi network with the SSID “EdimaxEXT.Setup **” and connect to it.
If you are using a computer, please disconnect any Ethernet
cables. For mobile devices, iOS 5 or Android 4.x or above is
required.
The last two characters of the SSID (EdimaxEXT.Setup**) will be
unique numbers according to your device e.g.”EdimaxEXT.Setup
c1”. These unique numbers are displayed as the last two
characters of the MAC address on the included access key card.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Open a web browser and if you do not automatically arrive at the “Get
click “Get Started” to begin the setup process.
your computer is set to use a dynamic IP address. For more
information please refer to V. Appendix.
4. Please read the on screen instructions about selecting a good location for
your wireless extender and then click “NEXT” to continue. You can check
your signal strength on the next page.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Select your Wi-Fi network from the list and enter the security
key/password. You can also enter a new Wi-Fi network name (SSID) if you
wish. Click “Next” to continue.
By default, the Wi-Fi extender’s new wireless network name
( SSID) is your existing router/access point’s SSID + _2EX. For
example if your router’s SSID is “Your SSID” then the EW-7438RPn
Air ’s SSID will be “Your SSID_2EX”. You can change your
extender’s new SSID in the “Extender Device SSID” field.
Check the box “Connect to a hidden network” if you wish to
connect to a hidden SSID and manually enter the details.
6. Please wait while the EW-7438RPn Air tests the connection.
If your Wi-Fi extender cannot obtain an IP address from your
existing router/access point then click the “Static IP” button to
assign an IP address to the extender.
7. When the connection test is complete, click “Apply” to restart the
extender.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
8. Please wait a moment until the extender is ready.
9. A final congratulations screen will indicate that setup is complete. The
EW-7438RPn Air is working and ready for use - the LED should display on
or flashing blue depending on your signal strength. To download the
EdiRange app, click the icon or scan the QR code.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Android:
iOS:
10. Please close the browser window. You can now connect to the
extender’s new SSID on a wireless device within range such as a computer,
smartphone or tablet.
The password for your Wi-Fi extender’s SSID is the same as for
your router’s SSID.
For more advanced configurations, use the browser based
configuration interface (refer to III. Browser Based
Configuration Interface)
8
Download from Www.Somanuals.com. All Manuals Search And Download.
II-2. WPS Setup
If your wireless router/access point supports WPS (Wi-Fi Protected Setup)
then you can use this method to setup your wireless extender.
1. Press the WPS button on your wireless router/access point to activate its
WPS.
Please check the instructions for your wireless router/access point
for how long you need to hold down its WPS button.
2. Within two minutes, press and hold the WPS
button on the wireless extender for two
seconds. The extender’s LED should flash
green to indicate that WPS is in progress.
3. The devices will establish a connection. The extender’s LED should display
on (green) for 30 seconds to indicate a successful connection.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
II-3. Reset to Factory Default Settings
If you experience problems with your extender or if you want to change the
extender to a different operating mode, you can reset the device back to its
factory settings. This resets all settings back to default.
1. Press and hold the WPS/Reset button for at least 10 seconds until the LED
is flashing red.
2.Wait for the extender to restart. The extender is ready for setup when the
LED displays on (red).
10
Download from Www.Somanuals.com. All Manuals Search And Download.
III. Browser Based Configuration Interface
You can use the browser based configuration interface to configure advanced
settings.
Please ensure that your computer is set to use a dynamic IP
address. Refer to V-1. Configuring your IP address for more
information.
III-1. Login
device which is connected to the same Wi-Fi network as the extender.
2.You will be prompted for a username and password. The default username
is “admin” and the default password is “1234”.
Windows:
Mac:
3. You will arrive at the “Status and Information” screen. Use the menu
down the left side to navigate.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
III-2. Save Settings
1. After you make any changes to the EW-7438RPn Air’s settings, please click
“APPLY”.
2. Then, select “CONTINUE” to save changes but not apply them yet, or
select “APPLY” to restart the EW-7438RPn Air and bring the changes into
effect.
The EW-7438RPn Air needs to restart in order to apply and bring
any changes into effect. Use the “CONTINUE” button to make
several changes and apply them all together in one restart.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
III-3. Main Menu
Use the main menu down the left side to navigate.
Screenshots displayed are examples.The information shown on
your screen will vary depending on your configuration.
III-3-1. Home
The “Status” page displays basic system information about the device,
arranged into three categories: system, wireless configuration & LAN
configuration.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Uptime
Displays the total time since the device was
turned on.
Hardware Version
Firmware Version
Mode
Displays the hardware version.
Displays the firmware version.
Displays the operating mode.
Wireless Scheduling Displays whether wireless scheduling is on or
off.
ESSID
Displays the EW-7438RPn Air’s ESSID,
sometimes also known as SSID. The
ESSID/SSID is the name used to identify a
wireless network.
Displays the current wireless channel.
Displays the current wireless security setting.
Displays the device’s BSSID. The BSSID
identifies the EW-7438RPn Air in the network,
and is the same as the device’s MAC address.
Displays the number of clients connected to
the EW-7438RPn Air. Click “Show Active
Channel Number
Security
BSSID (MAC)
Associated Clients
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Clients” to display a new window showing
information about wireless clients.
Displays the current connection status of the
EW-7438RPn Air.
Displays the wireless signal strength from
your router/access point to the EW-7438RPn
Air.
Status
Signal Strength
IP Address
Subnet Mask
Default
Displays the IP address of this device.
Displays the subnet mask of the IP address.
Displays the IP address of the default
gateway.
Displays the device’s MAC address. The MAC
address is a unique, fixed ID for this device, it
cannot be modified.
Gateway
MAC address
16
Download from Www.Somanuals.com. All Manuals Search And Download.
III-3-2. iQ Setup
You can run the setup wizard again to reconfigure the basic settings of the
device. Please refer back to II-1. Installation for guidance.
III-3. WPS Settings
Wi-Fi Protected Setup is a simple way to establish connections between WPS
compatible devices. When WPS is activated in the correct manner and at the
correct time for two compatible devices, they will automatically connect. PIN
code WPS includes the use of a PIN code between the two devices for
verification.
The WPS Settings page displays settings for WPS between your extender and a
wireless client. For WPS Setup between your extender and router/access
point, please use the WPS button as described in II-2. WPS Setup.
WPS Status
Displays “Configured” or “unConfigured”
depending on whether WPS and SSID/security
settings for the device have been configured or
not, either manually or using the WPS button.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Self PIN Code
Configuration
Displays the WPS PIN code of the device.
The configuration mode of the device’s WPS
Mode Device is as setting is displayed here. “Registrar” means
an AP
the device acts as an access point for a wireless
client to connect to and the wireless client(s)
will follow the device’s wireless settings.
Configure via Push Click “Start PBC” (Push-Button Configuration)
Button
to activate WPS on the access point. WPS will
be active for 2 minutes.
Enter the wireless client’s PIN code here and
click “Start PIN” to activate PIN code WPS.
Refer to your wireless client’s documentation if
you are unsure of its PIN code.
Input Client PIN
Code
18
Download from Www.Somanuals.com. All Manuals Search And Download.
III-4. Advanced Settings
The “Advanced Settings” page allows you to adjust the power output and LED
operation of the EW-7438RPn Air. The submenu options listed under
“Advanced Settings” allow you to configure security, scheduling, guest
network and various administrative and management functions.
Tx Power
You can adjust the level of wireless output
power as a percentage. Depending on the size
of your location and required coverage, you
may not require 100% output power.
Reducing the output power can enhance
security since your Wi-Fi signal will not extend
to potential malicious/unknown users in
distant areas.
Enable LED Off
Mode
Check this box to enable “LED Off Mode”
which allows you to select “Turn off all LED
indicators” .
19
Download from Www.Somanuals.com. All Manuals Search And Download.
III-4-1.
WLAN Security
The security/encryption type and password for your wireless extender is the
same as your existing router/access point. On this page you can set a new
SSID for your extender and choose to broadcast or hide the extender’s SSID.
Broadcast SSID
Enable or disable ESSID broadcast. When
enabled, the ESSID will be visible to clients as
an available Wi-Fi network. When disabled,
the ESSID will not be visible as an available
Wi-Fi network to clients – clients must
manually enter the ESSID in order to connect.
A hidden (disabled) ESSID is typically more
secure than a visible (enabled) SSID. WPS
(Wi-Fi Protected Setup) is also disabled when
SSID broadcast is disabled.
This is the name of your Wi-Fi network for
identification, also sometimes referred to as
“SSID”. The SSID can consist of any
combination of up to 32 alphanumerical
characters.
Device SSID
Security Type
The security/encryption type of your
EW-7438RPn Air’s wireless network is
displayed here. The security/encryption type
is the same as your existing router/access
point.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
III-4-2. Scheduling Setting
The “Scheduling Settings” page enables you to configure the EW-7438RPn
Air’s scheduling function, along with the time & date settings. The scheduling
function allows you to schedule the extender’s Wi-Fi and LED on or off
according to your preference.
Wireless scheduling can save energy and increase the security of
your network.
Set Date & Time
Automatically
Select “Yes” to set the date & time
automatically, and select “No” to set a time
zone and time server manually.
Select the time zone of your country or
region.
Time Setting
Time Server Address The extender supports NTP (Network Time
Protocol), select a time server from the drop
down menu.
Daylight Savings
If your country/region uses daylight saving
time, please check the “Enable Function”
box, and select the start and end date.
Time & date and NTP server settings must be configured correctly
in order for the scheduling feature to function properly.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Add
Click to add a new schedule in a new window
(see below).
Edit an existing schedule in a new window.
Delete the specified schedule.
Edit
Delete
Add
When you click “Add” to add a new schedule, a new window will open as
shown below:
Schedules can be set individually by day or to occur every day.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
1.Enter a name for the schedule in the “schedule description” box in the top
right corner.
2. Specify a start and end time (hours and minutes) and day (or select
“everyday”) for the schedule using the drop-down menus.
3. Select the schedule in the “Select” column and click “Save” to save the
schedule, or “Back” to cancel and go back to the previous screen.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
III-4-3. Guest Network
You can use an additional “guest” wireless network so guest users can enjoy
Wi-Fi connectivity without accessing your primary network. The guest
network can also be used as a parental control function, allowing you to
moderate your child’s Internet access.
The guest network is separate from your extender’s primary
network.
Enable Guest SSID Check/uncheck the box to enable/disable the
guest Wi-Fi network.
Enter a reference/ID name for your guest
wireless network.
Wireless Guest
Name
Enable Wireless
Clients Isolation
Check the box to enable wireless clients
isolation. This prevents wireless clients
connected to the extender from
communicating with each other and improves
security. Typically, this function is useful for
corporate environments or public hot spots
and can prevent brute force attacks on clients’
usernames and passwords.
Displays the wireless standard used for the
extender’s frequency band:
Band
2.4GHz (b+g+n): Allows 802.11b, 802.11g, and
802.11n wireless clients to connect to the
extender.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Channel Number
Channel number for the guest network is the
same as the main SSID and cannot be adjusted
independently.
Encryption
Enable or disable encryption for the guest
network.
When encryption is enabled, enter a
pre-shared key (password) for your guest
network.
Pre-shared Key
You cannot select a different encryption type (e.g. WEP, TKIP, etc.)
for your guest network. The default encryption type is WPA2
which is the most secure encryption type.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
III-4-4. Administration Utility
You can change the password used to login to the browser-based
configuration interface here. It is advised to do so for security purposes. You
can also configure the EW-7438RPn Air’s IP address.
Please make a note of the new password. In the event that you
forget the password and are unable to login to the browser
based configuration interface, see II-3. Reset to factory default
settings for how to reset the device.
Current Password
New Password
Enter your current password.
Enter your new password.
Confirmed Password Confirm your new password.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
2.4GHz
To have your wireless router automatically assign an IP address to your
extender (recommended), select “Obtain an IP address automatically”. To
assign an IP address to your extender manually, select “Use the following IP
address”.
IP Address
Specify an IP address here. This IP address will
be assigned to your EW-7438RPn Air.
Input the subnet mask of the new IP address.
Input the network’s gateway IP address.
Subnet Mask
Gateway Address
27
Download from Www.Somanuals.com. All Manuals Search And Download.
III-4-5.
Configuration Tools
The “Configuration Tools” menu allows you to backup the EW-7438RPn Air’s
settings, restore the settings to a previous version or restore the EW-7438RPn
Air back to its factory default state. You can also upgrade the firmware,
reboot the device and export the system log.
Backup Settings
Restore Settings
Click “Save” to save the current settings on
your computer as config.bin file.
Click “Browse” to find a previously saved
config.bin file and then click “Upload” to
replace your current settings.
Restore to Factory Click “Reset” to restore settings to the factory
Default
default. A pop-up window will appear and ask
you to confirm and enter your log in details.
Enter your username and password and click
“Ok”. See below for more information.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Upgrade Firmware
You can upgrade the system firmware to a more recent version. You can
download the latest firmware from the Edimax website. After the upgrade,
the system will restart.
Do not switch off or disconnect the device during a firmware
upgrade, as this could damage the device. It is recommended that
you use a computer for a firmware upgrade.
Browse
Open a new window to locate and select the
firmware file in your computer.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Reboot
In the event that the extender malfunctions or is not responding, then it is
recommended that you restart the device.
Rebooting the EW-7438RPn Air will not affect the current
configuration/settings of the device.
Apply
Click “Apply” to reboot the device. A status
bar will indicate the progress of the reboot
and you will see a confirmation screen when
the reboot is complete.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
System Log
You can export the system log to a separate file if you require.
Export system log
Click to open a new window and select a
location to save the log file.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
IV. EdiRange App
The EdiRange app is a free smartphone app from which you can manage the
extender’s functions and check your local Wi-Fi environment.
Please ensure that your smartphone/tablet is connected to your
extender’s Wi-Fi (SSID).
IV-1. Login
After setup you can use the browser based configuration interface to
configure advanced settings.
1. Open the EdiRange app.
2. Select “Management”.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Enter the username and password (default username: admin default
password: 1234).
The admin password is the same password used
for the browser based configuration interface. It
is recommended that you change the password
from the default “1234”. You can change the
password in the “admin” page from the main
menu.
4. Wait for the app to log in.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
IV-2. Main Menu
After you log in, the “Status” page will be displayed. You can see the extender
status, SSID name, and guest network and schedule status here. Use the menu
of icons across the bottom of the screen to navigate around the app.
Logout
Click the logout icon in the top left corner of the app anytime to log
out from the app.
Help
Click the help icon in the top right corner of the app anytime to
display help and tips about using the app.
More
Click the “more” icon in the main menu to display an additional menu
with more options:
34
Download from Www.Somanuals.com. All Manuals Search And Download.
IV-3. Good Night Mode
Good Night Mode will put the extender to “sleep” (switch off Wi-Fi and LED)
for a specified number of hours. Enter the number of hours and click “Yes” to
activate Good Night Mode.
Your mobile device will be disconnected from the extender during
sleep mode since Wi-Fi is disabled. You can wake the extender
(back to its fully functional state) anytime by manually pressing
the WPS/Reset button.
IV-4. Wi-Fi Scheduling
Wi-Fi can be scheduled to switch off according to your preference. Your
current schedules are displayed in the table: grey areas indicate Wi-Fi is off
and orange areas indicate Wi-Fi is on.
Touch the time bars on the screen to open the schedule settings, and then
click “Add” or “Edit” to add a new or edit an existing schedule for Wi-Fi off.
Daylight Savings can also be configured here.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
V. Appendix
V-1. Configuring your IP address
ensure your computer is set to use a dynamic IP address. This means your
computer can obtain an IP address automatically from a DHCP server. You can
check if your computer is set to use a dynamic IP address by following V-1-1.
How to check that your computer uses a dynamic IP address.
Static IP users can also temporarily modify your computer’s IP address to be
in the same IP address subnet e.g. 192.168.9.x (x = 3 – 254) as the
The EW-7438RPn Air’s default IP address is 192.168.9.2.
The procedure for modifying your IP address varies across different operating
systems; please follow the guide appropriate for your operating system in
V-1-2. How to modify the IP address of your computer.
Static IP users please make a note of your static IP before you
change it.
You can assign a new IP address to the extender which is within the subnet of
your network during setup or using the browser based configuration interface,
modifying your IP address.
Please remember to change your IP address back to its original
value after the device is properly configured.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
V-1-1. How to check that your computer uses a dynamic IP address
Please follow the instructions appropriate for your operating system.
V-1-1-1. Windows XP
1. Click the “Start” button (it should be located in the lower-left corner of
your computer), then click “Control Panel”. Double-click the “Network and
Internet Connections” icon, click “Network Connections”, and then
double-click “Local Area Connection”. The “Local Area Connection Status”
window will then appear, click “Properties”.
2. “Obtain an IP address automatically” and “Obtain DNS server address
automatically” should be selected.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
V-1-1-2. Windows Vista
1. Click the “Start” button (it should be located in the lower-left corner of
your computer), then click “Control Panel”. Click “View Network Status and
Tasks”, then click “Manage Network Connections”. Right-click “Local Area
Network”, then select “Properties”. The “Local Area Connection Properties”
window will then appear, select “Internet Protocol Version 4 (TCP / IPv4)”,
and then click “Properties”.
2. Select “Obtain an IP address automatically” and “Obtain DNS server
address automatically” should be selected.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
V-1-1-3. Windows 7
1. Click the “Start” button (it should be located in the lower-left corner of
your computer), then click “Control Panel”.
2. Under “Network and Internet” click “View network status and tasks”.
3. Click “Local Area Connection”.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Click “Properties”.
5. Select “Internet Protocol Version 4 (TCP/IPv4) and then click “Properties”.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Select “Obtain an IP address automatically” and “Obtain DNS server
address automatically” should be selected.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
V-1-1-4. Windows 8
1. From the Windows 8 Start screen, you need to switch to desktop mode.
Move your curser to the bottom left of the screen and click.
2. In desktop mode, click the File Explorer icon in the bottom left of the
screen, as shown below.
3. Right click “Network” and then select “Properties”.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
4. In the window that opens, select “Change adapter settings” from the left
side.
5. Choose your connection and right click, then select “Properties”.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Select “Internet Protocol Version 4 (TCP/IPv4) and then click “Properties”.
7. Select “Obtain an IP address automatically” and “Obtain DNS server
address automatically” should be selected.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
V-1-1-5. Mac OS
1. Have your Macintosh computer operate as usual, and click on “System
Preferences”.
2. In System Preferences, click on “Network”.
3. Click on “Wi-Fi” in the left panel and then click “Advanced” in the lower
right corner.
4. Select “TCP/IP” from the top menu and “Using DHCP” in the drop down
menu labeled “Configure IPv4” should be selected.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
V-1-2. How to modify the IP address of your computer
Please follow the instructions appropriate for your operating system. In the
following examples we use the IP address 192.168.9.20 though you can use
any IP address in the range 192.168.9.x (x = 3 – 254) in order to access iQ
Setup/browser based configuration interface.
Please make a note of your static IP before you change it.
V-1-2-1.
Windows XP
1. Click the “Start” button (it should be located in the lower-left corner of
your computer), then click “Control Panel”. Double-click the “Network and
Internet Connections” icon, click “Network Connections”, and then
double-click “Local Area Connection”. The “Local Area Connection Status”
window will then appear, click “Properties”.
2. Select “Use the following IP address”, then input the following values:
Your existing static IP address will be displayed in the “IP
address” field before you replace it. Please make a note of this IP
51
Download from Www.Somanuals.com. All Manuals Search And Download.
address, subnet mask, default gateway and DNS server
addresses.
IP address: 192.168.9.20
Subnet Mask: 255.255.255.0
Click ‘OK’ when finished.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
V-1-2-2.
Windows Vista
1. Click the “Start” button (it should be located in the lower-left corner of
your computer), then click “Control Panel”. Click “View Network Status and
Tasks”, then click “Manage Network Connections”. Right-click “Local Area
Network”, then select “Properties”. The “Local Area Connection Properties”
window will then appear, select “Internet Protocol Version 4 (TCP / IPv4)”,
and then click “Properties”.
2. Select “Use the following IP address”, then input the following values:
Your existing static IP address will be displayed in the “IP
address” field before you replace it. Please make a note of this IP
address, subnet mask, default gateway and DNS server
addresses.
IP address: 192.168.9.20
Subnet Mask: 255.255.255.0
Click ‘OK’ when finished.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Under “Network and Internet” click “View network status and tasks”.
3. Click “Local Area Connection”.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Click “Properties”.
5. Select “Internet Protocol Version 4 (TCP/IPv4) and then click “Properties”.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Select “Use the following IP address”, then input the following values:
Your existing static IP address will be displayed in the “IP
address” field before you replace it. Please make a note of this IP
address, subnet mask, default gateway and DNS server
addresses.
IP address: 192.168.9.20
Subnet Mask: 255.255.255.0
Click ‘OK’ when finished.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
V-1-2-4.
Windows 8
1. From the Windows 8 Start screen, you need to switch to desktop mode.
Move your curser to the bottom left of the screen and click.
2. In desktop mode, click the File Explorer icon in the bottom left of the
screen, as shown below.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Right click “Network” and then select “Properties”.
4. In the window that opens, select “Change adapter settings” from the left
side.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Choose your connection and right click, then select “Properties”.
6. Select “Internet Protocol Version 4 (TCP/IPv4) and then click “Properties”.
61
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Select “Use the following IP address”, then input the following values:
Your existing static IP address will be displayed in the “IP
address” field before you replace it. Please make a note of this IP
address, subnet mask, default gateway and DNS server
addresses.
IP address: 192.168.9.20
Subnet Mask: 255.255.255.0
Click ‘OK’ when finished.
62
Download from Www.Somanuals.com. All Manuals Search And Download.
V-1-2-5.
Mac
1. Have your Macintosh computer operate as usual, and click on “System
Preferences”
2. In System Preferences, click on “Network”.
3. Click on “Wi-Fi” in the left panel and then click “Advanced” in the lower
right corner.
4. Select “TCP/IP” from the top menu and select “Manually” from the drop
down menu labeled “Configure IPv4”, then click “OK”.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Your existing static IP address will be displayed in the “IP
address” field before you replace it. Please make a note of this IP
address, subnet mask, default gateway and DNS server
addresses.
5. In the “IPv4 Address” and “Subnet Mask” field enter IP address
192.168.9.20 and subnet mask 255.255.255.0. Click on “OK”.
64
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Click “Apply” to save the changes.
65
Download from Www.Somanuals.com. All Manuals Search And Download.
V-1-3. How to Find Your Network Security Key
To find your network security key, please follow the instructions appropriate
for your operating system.
If you are using Windows XP or earlier, please contact your ISP or
router manufacturer to find your network security key.
V-1-3-1. Windows 7 & Vista
1. Open “Control Panel” and click on “Network and Internet” in the top
menu.
2. Click on “View network status and tasks” which is under the heading
“Network and Sharing Center”.
3. Click on “Manage wireless networks” in the left menu.
66
Download from Www.Somanuals.com. All Manuals Search And Download.
4. You should see the profile of your Wi-Fi network in the list. Right click on
your Wi-Fi network and then click on “Properties”.
5.Click on the “Security” tab, and then check the box labeled “Show
characters”. This will show your network security key. Click the “Cancel”
button to close the window.
67
Download from Www.Somanuals.com. All Manuals Search And Download.
V-1-3-2. Mac
1. Open a new Finder window, and select “Applications” from the menu on
the left side. Open the folder labeled “Utilities” and then open the
application “Keychain Access”.
2. Select “Passwords” from the sub-menu labeled “Category” on the left side,
as shown below. Then search the list in the main panel for the SSID of your
network. In this example, the SSID is “EdimaxWireless” – though your SSID
will be unique to your network.
68
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Double click the SSID of your network and you will see the following
window.
4. Check the box labeled “Show password” and you will be asked to enter
your administrative password, which you use to log into your Mac. Enter
your password and click “Allow”.
69
Download from Www.Somanuals.com. All Manuals Search And Download.
Your network security password will now be displayed in the field next to
the box labeled “Show password”. In the example below, the network
security password is “edimax1234”. Please make a note of your network
security password.
70
Download from Www.Somanuals.com. All Manuals Search And Download.
V-1-4. How to Find Your Router’s IP Address
To find your router’s IP address, please follow the instructions appropriate for
your operating system.
V-1-4-1. Windows XP, Vista & 7
1. Go to “Start”, select “Run” and type “cmd”, then press Enter or click “OK”.
2. A new window will open, type “ipconfig” and press Enter.
71
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Your router’s IP address will be displayed next to “Default Gateway”.
72
Download from Www.Somanuals.com. All Manuals Search And Download.
V-1-4-2. Windows 8
1. From the Windows 8 Start screen, move your curser to the top right
corner of the screen to display the Charms bar.
2. Click “Search” and enter “cmd” into the search bar. Click the “Command
Prompt” app which be displayed on the left side.
73
Download from Www.Somanuals.com. All Manuals Search And Download.
3. A new window will open, type “ipconfig” and press Enter.
74
Download from Www.Somanuals.com. All Manuals Search And Download.
4.Your router’s IP address will be displayed next to “Default Gateway”.
75
Download from Www.Somanuals.com. All Manuals Search And Download.
V-1-4-3. Mac
1. Launch “System Preferences” and click on “Network”.
2. If you are using an Ethernet cable to connect to your network, your
router’s IP address will be displayed next to “Router”.
3. If you are using Wi-Fi, click “Wi-Fi” in the left panel, and then “Advanced”
in the bottom right corner.
76
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Click the “TCP/IP” tab and your router’s IP address will be displayed next
to “Router”.
77
Download from Www.Somanuals.com. All Manuals Search And Download.
V-2. Connecting to a Wi-Fi network
For help connecting to your device’s EdimaxEXT.Setup SSID for initial setup,
or to connect to your device’s new Wi-Fi network (SSID) after setup is
complete, follow the guide below:
Below is an example of how to connect using Windows Vista – the
process may vary slightly for other versions of Windows.
1. Click the network icon ( , or ) in the system tray and select “Connect
to a network”.
2. Search for the SSID of your EW-7438RPn Air and then click “Connect”. If
you set a password for your network, you will then be prompted to enter it.
78
Download from Www.Somanuals.com. All Manuals Search And Download.
3. After correctly entering your password, you will be successfully connected
to the EW-7438RPn Air’s wireless network.
79
Download from Www.Somanuals.com. All Manuals Search And Download.
V-3. Glossary
Default Gateway (Wireless bridge): Every non-access point IP device needs to
configure a default gateway’s IP address. When the device sends out an IP
packet, if the destination is not on the same network, the device has to send
the packet to its default gateway, which will then send it out towards the
destination.
DHCP: Dynamic Host Configuration Protocol. This protocol automatically gives
every computer on your home network an IP address.
DNS Server IP Address: DNS stands for Domain Name System, which allows
point.com) and one or more IP addresses (such as 192.34.45.8). A DNS server
keeps a database of Internet servers and their respective domain names and
IP addresses, so that when a domain name is requested (as in typing
"Broadbandaccess point.com" into your Internet browser), the user is sent to
the proper IP address. The DNS server IP address used by the computers on
your home network is the location of the DNS server your ISP has assigned to
you.
DSL Modem: DSL stands for Digital Subscriber Line. A DSL modem uses your
existing phone lines to transmit data at high speeds.
Ethernet: A standard for computer networks. Ethernet networks are
connected by special cables and hubs, and move data around at up to 10/100
million bits per second (Mbps).
IP Address and Network (Subnet) Mask: IP stands for Internet Protocol. An IP
address consists of a series of four numbers separated by periods, that
identifies a single, unique Internet computer host in an IP network. Example:
192.168.2.1. It consists of 2 portions: the IP network address, and the host
identifier.
The IP address is a 32-bit binary pattern, which can be represented as four
cascaded decimal numbers separated by “.”: aaa.aaa.aaa.aaa, where each
“aaa” can be anything from 000 to 255, or as four cascaded binary numbers
separated by “.”: bbbbbbbb.bbbbbbbb.bbbbbbbb.bbbbbbbb, where each “b”
can either be 0 or 1.
80
Download from Www.Somanuals.com. All Manuals Search And Download.
A network mask is also a 32-bit binary pattern, and consists of consecutive
leading 1’s followed by consecutive trailing 0’s, such as
11111111.11111111.11111111.00000000. Therefore sometimes a network
mask can also be described simply as “x” number of leading 1’s.
When both are represented side by side in their binary forms, all bits in the IP
address that correspond to 1’s in the network mask become part of the IP
network address, and the remaining bits correspond to the host ID.
For example, if the IP address for a device is, in its binary form,
11011001.10110000.10010000.00000111, and if its network mask is,
11111111.11111111.11110000.00000000
It means the device’s network address is
11011001.10110000.10010000.00000000, and its host ID is,
00000000.00000000.00000000.00000111. This is a convenient and efficient
method for access points to route IP packets to their destination.
ISP Gateway Address: (see ISP for definition). The ISP Gateway Address is an
IP address for the Internet access point located at the ISP's office.
ISP: Internet Service Provider. An ISP is a business that provides connectivity
to the Internet for individuals and other businesses or organizations.
LAN: Local Area Network. A LAN is a group of computers and devices
connected together in a relatively small area (such as a house or an office).
Your home network is considered a LAN.
MAC Address: MAC stands for Media Access Control. A MAC address is the
hardware address of a device connected to a network. The MAC address is a
unique identifier for a device with an Ethernet interface. It is comprised of
two parts: 3 bytes of data that corresponds to the Manufacturer ID (unique
for each manufacturer), plus 3 bytes that are often used as the product’s
serial number.
NAT: Network Address Translation. This process allows all of the computers
on your home network to use one IP address. Using the broadband access
point’s NAT capability, you can access the Internet from any computer on
your home network without having to purchase more IP addresses from your
ISP.
Port: Network Clients (LAN PC) uses port numbers to distinguish one network
application/protocol over another. Below is a list of common applications and
protocol/port numbers:
81
Download from Www.Somanuals.com. All Manuals Search And Download.
Application Protocol Port Number
Telnet
FTP
SMTP
POP3
H.323
SNMP
SNMP Trap UDP
HTTP
PPTP
TCP
TCP
TCP
TCP
TCP
UCP
23
21
25
110
1720
161
162
80
1723
5631
5632
TCP
TCP
PC Anywhere TCP
PC Anywhere UDP
Access point: A access point is an intelligent network device that forwards
packets between different networks based on network layer address
information such as IP addresses.
Subnet Mask: A subnet mask, which may be a part of the TCP/IP information
provided by your ISP, is a set of four numbers (e.g. 255.255.255.0) configured
like an IP address. It is used to create IP address numbers used only within a
particular network (as opposed to valid IP address numbers recognized by the
Internet, which must be assigned by InterNIC).
TCP/IP, UDP: Transmission Control Protocol/Internet Protocol (TCP/IP) and
Unreliable Datagram Protocol (UDP). TCP/IP is the standard protocol for data
transmission over the Internet. Both TCP and UDP are transport layer protocol.
TCP performs proper error detection and error recovery, and thus is reliable.
UDP on the other hand is not reliable. They both run on top of the IP (Internet
Protocol), a network layer protocol.
WAN: Wide Area Network. A network that connects computers located in
geographically separate areas (e.g. different buildings, cities, countries). The
Internet is a wide area network.
Web-based management Graphical User Interface (GUI): Many devices
support a graphical user interface that is based on the web browser. This
means the user can use the familiar Netscape or Microsoft Internet Explorer
to Control/configure or monitor the device being managed.
82
Download from Www.Somanuals.com. All Manuals Search And Download.
COPYRIGHT
Copyright Edimax Technology Co., Ltd. all rights reserved. No part of this publication
may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated
into any language or computer language, in any form or by any means, electronic,
mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written
permission from Edimax Technology Co., Ltd.
Edimax Technology Co., Ltd. makes no representations or warranties, either expressed or
implied, with respect to the contents hereof and specifically disclaims any warranties,
merchantability, or fitness for any particular purpose. Any software described in this
manual is sold or licensed as is. Should the programs prove defective following their
purchase, the buyer (and not this company, its distributor, or its dealer) assumes the
entire cost of all necessary servicing, repair, and any incidental or consequential damages
resulting from any defect in the software. Edimax Technology Co., Ltd. reserves the right
to revise this publication and to make changes from time to time in the contents hereof
without the obligation to notify any person of such revision or changes.
The product you have purchased and the setup screen may appear slightly different from
those shown in this QIG. The software and specifications are subject to change without
names mentioned in this manual are trademarks and/or registered trademarks of their
respective holders.
83
Download from Www.Somanuals.com. All Manuals Search And Download.
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio technician for help.
FCC Caution
Any changes or modifications not expressly approved by the party responsible for compliance could void the
authority to operate equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels
is not possible. This device and its antenna(s) must not be co-located or operating in conjunction with any other
antenna or transmitter.
R&TTE Compliance Statement
This equipment complies with all the requirements of DIRECTIVE 1999/5/EC OF THE EUROPEAN PARLIAMENT AND
THE COUNCIL of March 9, 1999 on radio equipment and telecommunication terminal equipment and the mutual
recognition of their conformity (R&TTE). The R&TTE Directive repeals and replaces in the directive 98/13/EEC
(Telecommunications Terminal Equipment and Satellite Earth Station Equipment) As of April 8, 2000.
Safety
This equipment is designed with the utmost care for the safety of those who install and use it. However, special
attention must be paid to the dangers of electric shock and static electricity when working with electrical
equipment. All guidelines of this and of the computer manufacture must therefore be allowed at all times to
ensure the safe use of the equipment.
EU Countries Intended for Use
The ETSI version of this device is intended for home and office use in Austria, Belgium, Bulgaria, Cyprus, Czech,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Turkey, and United Kingdom. The ETSI
version of this device is also authorized for use in EFTA member states: Iceland, Liechtenstein, Norway, and
Switzerland.
EU Countries Not Intended for Use
None
84
Download from Www.Somanuals.com. All Manuals Search And Download.
EU Declaration of Conformity
English:
Français:
Čeština:
Polski:
This equipment is in compliance with the essential requirements and other relevant
provisions of Directive 1995/95/EC, 2011/65/EC.
Cet équipement est conforme aux exigences essentielles et autres dispositions de la
directive 1995/95/CE, 2011/65/CE.
Toto zařízení je v souladu se základními požadavky a ostatními příslušnými ustanoveními
směrnic 1995/95/ES, 2011/65/ES.
Urządzenie jest zgodne z ogólnymi wymaganiami oraz szczególnymi warunkami
określonymi Dyrektywą UE 1995/95/EC, 2011/65/EC..
Română:
Русский:
Magyar:
Türkçe:
Acest echipament este în conformitate cu cerinţele esenţiale şi alte prevederi relevante ale
Directivei 1995/95/CE, 2011/65/CE.
Это оборудование соответствует основным требованиям и положениям Директивы
1995/95/EC, 2011/65/EC.
Ez a berendezés megfelel az alapvető követelményeknek és más vonatkozó irányelveknek
(1995/95/EK, 2011/65/EK).
Bu cihaz 1995/95/EC, 2011/65/EC direktifleri zorunlu istekler ve diğer hükümlerle ile
uyumludur.
Українська: Обладнання відповідає вимогам і умовам директиви 1995/95/EC, 2011/65/EC.
Slovenčina: Toto zariadenie spĺňa základné požiadavky a ďalšie príslušné ustanovenia smerníc
1995/95/ES, 2011/65/ES.
Deutsch:
Español:
Dieses Gerät erfüllt die Voraussetzungen gemäß den Richtlinien 1995/95/EC, 2011/65/EC.
El presente equipo cumple los requisitos esenciales de la Directiva 1995/95/EC,
2011/65/EC.
Italiano:
Questo apparecchio è conforme ai requisiti essenziali e alle altre disposizioni applicabili
della Direttiva 1995/95/CE, 2011/65/CE.
Nederlands: Dit apparaat voldoet aan de essentiële eisen en andere van toepassing zijnde bepalingen
van richtlijn 1995/95/EC, 2011/65/EC..
Português: Este equipamento cumpre os requesitos essênciais da Directiva 1995/95/EC, 2011/65/EC.
Norsk:
Dette utstyret er i samsvar med de viktigste kravene og andre relevante regler i Direktiv
1995/95/EC, 2011/65/EC.
Svenska:
Dansk:
Denna utrustning är i överensstämmelse med de väsentliga kraven och övriga relevanta
bestämmelser i direktiv 1995/95/EG, 2011/65/EG.
Dette udstyr er i overensstemmelse med de væsentligste krav og andre relevante
forordninger i direktiv 1995/95/EC, 2011/65/EC.
suomen kieli: Tämä laite täyttää direktiivien 1995/95/EY, 2011/65/EY oleelliset vaatimukset ja muut
asiaankuuluvat määräykset.
-----------------------------------------------------------------------------------------------------------------------
WEEE Directive & Product Disposal
At the end of its serviceable life, this product should not be treated as household or general waste. It
should be handed over to the applicable collection point for the recycling of electrical and electronic
equipment, or returned to the supplier for disposal.
85
Download from Www.Somanuals.com. All Manuals Search And Download.
Declaration of Conformity
We, Edimax Technology Co., Ltd., declare under our sole responsibility, that the
equipment described below complies with the requirements of the European R&TTE
directive 1999/95/EC, and directive 2011/65/EC(RoHS) .
Equipment: N300 Smart Wi-Fi Extender
Model No.: EW-7438RPn Air
The following European standards for essential requirements have been followed:
Spectrum: ETSI EN 300 328 V1.8.1 (2012-06)
EMC: EN 301 489-1 V1.9.2 (2011-09);
EN 301 489-17 V2.2.1 (2012-09)
EMF: EN 62311:2008
Safety (LVD): IEC 60950-1:2005 (2nd Edition);Am1:2009
EN-60950-1:2006+A11:2009+A1:2010+A12:2011
Edimax Technology Europe B.V.
Nijverheidsweg 25,
5683 CJ BEST
a company of :
Edimax Technology Co., Ltd.,
No. 3, Wu Chuan 3rd Road,
Wu-Ku Industrial Park,
New Taipei City, Taiwan
THE NETHERLANDS
Signature:
Printed Name:
Title:
Vivian Ma
Director
Date of Signature: March 30, 2014
Signature:
Printed Name:
Title:
Albert Chang
Director
Edimax Technology Co., Ltd.
86
Download from Www.Somanuals.com. All Manuals Search And Download.
Notice According to GNU General Public License Version 2
This product includes software that is subject to the GNU General Public License version 2. The program is free software and
distributed without any warranty of the author. We offer, valid for at least three years, to give you, for a charge no more
than the costs of physically performing source distribution, a complete machine-readable copy of the corresponding source
code.
Das Produkt beinhaltet Software, die den Bedingungen der GNU/GPL-Version 2 unterliegt. Das Programm ist eine sog. „Free
Software“, der Autor stellt das Programm ohne irgendeine Gewährleistungen zur Verfügung. Wir bieten Ihnen für einen
Zeitraum von drei Jahren an, eine vollständige maschinenlesbare Kopie des Quelltextes der Programme zur Verfügung zu
stellen – zu nicht höheren Kosten als denen, die durch den physikalischen Kopiervorgang anfallen.
GNU GENERAL PUBLIC LICENSE
Version 2, June 1991
Copyright (C) 1989, 1991 Free Software Foundation, Inc. 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA
Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.
Preamble
The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General
Public License is intended to guarantee your freedom to share and change free software--to make sure the software is free
for all its users. This General Public License applies to most of the Free Software Foundation’s software and to any other
program whose authors commit to using it. (Some other Free Software Foundation software is covered by the GNU Lesser
General Public License instead.) You can apply it to your programs, too.
When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make
sure that you have the freedom to distribute copies of free software (and charge for this service if you wish), that you receive
source code or can get it if you want it, that you can change the software or use pieces of it in new free programs; and that
you know you can do these things.
To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender
the rights. These restrictions translate to certain responsibilities for you if you distribute copies of the software, or if you
modify it.
For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the rights
that you have. You must make sure that they, too, receive or can get the source code. And you must show them these terms
so they know their rights.
We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal
permission to copy, distribute and/or modify the software.
Also, for each author’s protection and ours, we want to make certain that everyone understands that there is no warranty for
this free software. If the software is modified by someone else and passed on, we want its recipients to know that what they
have is not the original, so that any problems introduced by others will not reflect on the original authors’ reputations.
Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that redistributors of a
free program will individually obtain patent licenses, in effect making the program proprietary. To prevent this, we have
made it clear that any patent must be licensed for everyone’s free use or not licensed at all.
The precise terms and conditions for copying, distribution and modification follow.
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be
distributed under the terms of this General Public License. The ‘“Program’“, below, refers to any such program or work, and a
‘“work based on the Program’“ means either the Program or any derivative work under copyright law: that is to say, a work
containing the Program or a portion of it, either verbatim or with modifications and/or translated into another language.
(Hereinafter, translation is included without limitation in the term ‘“modification’“.) Each licensee is addressed as ‘“you’“.
Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The
act of running the Program is not restricted, and the output from the Program is covered only if its contents constitute a
work based on the Program (independent of having been made by running the Program). Whether that is true depends on
what the Program does.
1. You may copy and distribute verbatim copies of the Program’s source code as you receive it, in any medium, provided that
you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep
87
Download from Www.Somanuals.com. All Manuals Search And Download.
intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of the
Program a copy of this License along with the Program.
You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in
exchange for a fee.
2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program, and
copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these
conditions:
a) You must cause the modified files to carry prominent notices stating that you changed the files and the date of any
change.
b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the
Program or any part thereof, to be licensed as a whole at no charge to all third parties under the terms of this
License.
c) If the modified program normally reads commands interactively when run, you must cause it, when started
running for such interactive use in the most ordinary way, to print or display an announcement including an
appropriate copyright notice and a notice that there is no warranty (or else, saying that you provide a warranty)
and that users may redistribute the program under these conditions, and telling the user how to view a copy of
this License. (Exception: if the Program itself is interactive but does not normally print such an announcement,
your work based on the Program is not required to print an announcement.)
These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the
Program, and can be reasonably considered independent and separate works in themselves, then this License, and its terms,
do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as
part of a whole which is a work based on the Program, the distribution of the whole must be on the terms of this License,
whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote
it.
Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent
is to exercise the right to control the distribution of derivative or collective works based on the Program.
In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the
Program) on a volume of a storage or distribution medium does not bring the other work under the scope of this License.
3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable form under
the terms of Sections 1 and 2 above provided that you also do one of the following:
a) Accompany it with the complete corresponding machine-readable source code, which must be distributed under
the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or,
b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than
your cost of physically performing source distribution, a complete machine-readable copy of the corresponding
source code, to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for
software interchange; or,
c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This
alternative is allowed only for noncommercial distribution and only if you received the program in object code or
executable form with such an offer, in accord with Subsection b above.)
The source code for a work means the preferred form of the work for making modifications to it. For an executable work,
complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus
the scripts used to control compilation and installation of the executable. However, as a special exception, the source code
distributed need not include anything that is normally distributed (in either source or binary form) with the major
components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component
itself accompanies the executable.
If distribution of executable or object code is made by offering access to copy from a designated place, then offering
equivalent access to copy the source code from the same place counts as distribution of the source code, even though third
parties are not compelled to copy the source along with the object code.
4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License. Any
attempt otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate your rights
under this License. However, parties who have received copies, or rights, from you under this License will not have their
licenses terminated so long as such parties remain in full compliance.
5. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to
modify or distribute the Program or its derivative works. These actions are prohibited by law if you do not accept this License.
Therefore, by modifying or distributing the Program (or any work based on the Program), you indicate your acceptance of
this License to do so, and all its terms and conditions for copying, distributing or modifying the Program or works based on it.
88
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license
from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not
impose any further restrictions on the recipients’ exercise of the rights granted herein. You are not responsible for enforcing
compliance by third parties to this License.
7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent
issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of
this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy
simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not
distribute the Program at all. For example, if a patent license would not permit royalty-free redistribution of the Program by
all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License
would be to refrain entirely from distribution of the Program.
If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is
intended to apply and the section as a whole is intended to apply in other circumstances.
It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity
of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system,
which is implemented by public license practices. Many people have made generous contributions to the wide range of
software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to
decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice.
This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.
8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces,
the original copyright holder who places the Program under this License may add an explicit geographical distribution
limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such
case, this License incorporates the limitation as if written in the body of this License.
9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to time.
Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or
concerns.
Each version is given a distinguishing version number. If the Program specifies a version number of this License which applies
to it and ‘“any later version’“, you have the option of following the terms and conditions either of that version or of any later
version published by the Free Software Foundation. If the Program does not specify a version number of this License, you
may choose any version ever published by the Free Software Foundation.
10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different,
write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the
Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of
preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software
generally.
NO WARRANTY
11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT
PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER
PARTIES PROVIDE THE PROGRAM ‘“AS IS’“ WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING,
BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE
ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE
DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY
OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR
DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR
INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE
OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
89
Download from Www.Somanuals.com. All Manuals Search And Download.
|