Edifier Enterprises Canada Speaker System R451 User Manual

R451  
Multimedia Desktop Theater  
VOLUME  
REAR  
BASS  
R451  
User's Manual  
Edifier Enterprises Canada Inc.  
Made in China  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
6.5 inch antimagnetic professionally enhanced subwoofer driver  
3 inch antimagnetic full range tweeter unit  
Two dispartly frequency satellites design  
Low noise designed  
Open the packing  
Please check the speaker pattern marked on the package. Please contact the seller as soon as possible if you  
find the speakeris not thepattern you want.  
R451 packinglist:  
Overview  
Edifier  
Edifier  
1 x Sub Woofer  
Edifier  
5 x satellite Speakers  
3 x Audio Connecting Cord  
1 x User's Manual  
VOLUME  
Edifier  
REAR  
BASS  
Edifier  
Introduction of backpanel  
1
2
3
4
5
6
7
8
9
Sub Woofer  
R451  
Satellite Speakers  
Super Bass Control  
Surround Control  
Volume Control  
Power Indicator  
Audio connecting cord  
User's Manual  
Multimedia Desktop Theater  
Speaker Output  
LINE IN  
C
SL  
L
+
+
+
+
-
-
-
-
SW  
SR  
R
SR  
SL  
Speaker Output  
+
+
+
+
Line In Port  
-
-
-
-
10 Speaker Out  
11 Power Switch  
12 Power Cord  
R
C
L
POWER  
OFF  
ON  
CAUTION  
RISK OF ELECTRIC SHOCK  
DO NOT OPEN  
CONNECTING  
R451  
Multimedia Desktop Theater  
Speaker Output  
LINE IN  
C
SL  
L
+
+
+
+
-
-
-
-
SW  
SR  
R
SR  
SL  
Speaker Output  
+
+
+
+
-
-
-
-
R
C
L
POWER  
OFF  
ON  
CAUTION  
RISK OF ELECTRIC SHOCK  
DO NOT OPEN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATING INSTRUCTIONS:  
Surround sound speaker systems using 5.1 format are designed to connect to compatible audio devices offering  
5.1 output. Many pc s and DVD players already offer this type of output. If you only have a 2 channel stereo  
output it may be possible to purchase a Dolby digital 5.1 decoder which will convert this into a 5.1 format. This is  
not included with these speakers. If you must use a 2 channel input then this should be connected to the front L  
and front R input. This will result in a stereo output only.  
1.POSITIONING  
If you have the 5.1 surround sound input then you can experience the full performance of this system. You will  
have the indivedual outputs for the subwoofer, front stereo, rear stereo and front centre speakers. Position the  
front stereo speakers in front of the listening position and an equal distance to the left and right sides. Ideally the  
speakers should be about ear height(when sitting to listen)if possible and slightly away from a rear wall but they  
can be hooded onto a wall if necessary. If they are placed on a slippery surface, a little blue-tack may help hold  
them in place. These speakers contribute a lot to the overall audio so careful placement is crucial to your  
enjoyment of the music.  
The centre speaker should be placed on your TV screen or your computer screen(depending upon  
application)as this speaker is used for vocal content. The voices in a movie need to sound as though they are  
coming from the Tv set so try positioning this on top of the set.  
The rear speakers are used for special effects and are not as crucial in their placement. A good position for these  
is high up on the wall behind the listening position, perhaps pointing downward a little.  
The subwoofer houses a powerful bass driver and the positioning of this unit can have an effect on the quality of  
the bass. If the unit is placed in a corner, the bass will be amplified by the reflection from the walls. This position  
will give maximum bass but can sound quite boomy. A position near a rear wall but away from the corner is best  
as this will give a little boost to the bass without being too much. Experiment with the position to achieve best  
results. Also note that the unit receives the signals from the remote control. The range of transmission from the  
remote is not too great so don`t position the bass unit too far from the listening position.  
2.CONNECTING  
(1).Switch off the power first before connecting any part of the system.  
(2).Connect all 5 satellite speakers to their relative speaker output spring clips on the rear panel of the  
subwoofer. Please note to match the colour, red to red and black to black. Note that the cable for the rear  
speakers is longer than the front.  
(3).Connect the inputs to your PC or DVD player as shown in figure.  
(4).Plug the AC power plug into the wall outlet, as shown in figure.  
SPECIFICATIONS:  
Total Power Output :  
Input Impedance:  
Input Sensitive:  
RMS 6WX5+30W  
10K Ohm  
450 mV  
Bass Unit:  
6 1/2 Aluminum coil, 4 Ohm  
Mid-range Unit:  
3
Paper coil, 4 Ohm  
Tweeter Unit:  
1 PV membrane dome  
42 Hz ~ 20KHz  
Frequency Response:  
Dimension(Subwoofer):  
Dimension(Satellite):  
Gross Weight:  
290(W) x 193(H) x 285(D)mm  
96(W) x 167(H) x 108(D)mm  
About 11Kg  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Earthquake Sound Speaker THOR IW SUB10 User Manual
Echo Trimmer HC 165 185 User Manual
Faber Ventilation Hood Magnum User Manual
Fisher Price Battery Charger H7461 User Manual
Friedrich Thermostat RT5 User Manual
Frigidaire Microwave Oven FFCE1431LW User Manual
Furuno Radar Detector FR 1505 MARK 3 User Manual
GE Range 49 8255 User Manual
Gianni Industries Door L NH2500 User Manual
Global Machinery Company Portable Generator LSSLV User Manual