Echo Edger PE 266 S User Manual

x7722271404 / x772000164  
PE-266/S  
Power Edger  
Operator’s Manual  
Burn Hazard  
The muffler or catalytic muffler and surrounding cover may become extremely hot.  
Always keep clear of exhaust and muffler area, otherwise serious personal injury may  
occur.  
The engine exhaust from this product contains chemicals known to the State of California to cause  
cancer, birth defects or other reproductive harm.  
Users of this equipment risk injury to themselves and others if the unit is used  
improperly and/or safety precautions are not followed. ECHO provides an operator’s  
manual and a safety manual. Both must be read and understood for proper and safe  
operation. Failure to do so could result in serious injury.  
Specifications, descriptions and illustrative material in this literature are as accurate as known at the time  
of publication, but are subject to change without notice. Illustrations may include optional equipment and  
accessories, and may not include all standard equipment.  
X7502026303  
© 6/2014 ECHO Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PE-266/S  
INTRODUCTION  
INTRODUCTION  
Welcome to the ECHO family. This ECHO product was designed and manufactured to provide long life and  
on-the-job dependability. Read and understand this manual and the SAFETY MANUAL. You will find both  
easy to use and full of helpful operating tips and SAFETY messages.  
The Operator’s Manual  
Keep it in a safe place for future reference. Contains specifications and information for safety, operation,  
maintenance, storage and assembly specific to this product.  
The Safety Manual  
Keep it in a safe place for future reference. Explains possible hazards and the measures you should take to  
insure safe operation.  
SERVICING INFORMATION  
Parts/Serial Number  
Genuine ECHO Parts and ECHO REPOWER™ Parts and  
Assemblies for your ECHO products are available only from an  
Authorized ECHO Dealer. When you do need to buy parts always  
have the Model Number and Serial Number of the unit with you. You  
can find these numbers on the engine housing. For future  
reference, write them in the space provided below.  
Model No. _________________ SN. ___________________  
Service  
Service of this product during the warranty period must be performed by an Authorized ECHO Service  
Dealer. For the name and address of the Authorized ECHO Service Dealer nearest you, ask your retailer or  
call: 1-800-432-ECHO (3246). Dealer information is also available on our Web Site. When presenting your  
unit for Warranty service/repairs, proof of purchase is required.  
Echo Consumer Product Support  
If you require assistance or have questions concerning the application, operation or maintenance of this  
product you may call the ECHO Consumer Product Support Department at 1-800-673-1558 from 8:00 am to  
5:00 pm (Central Standard Time) Monday through Friday. Before calling, please know the model and serial  
number of your unit.  
Product Registration  
To ensure trouble free warranty coverage it is important that you register your ECHO equipment on-line at  
product confirms your warranty coverage and provides a direct link between you and ECHO if we find it  
necessary to contact you.  
X7502026303  
3
© 6/2014 ECHO Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SAFETY  
PE-266/S  
Additional or Replacement Manuals  
For more information  
scan this QR code.  
Replacement Operator, Safety Manuals, and Parts Catalogs  
or by contacting ECHO Inc., 400 Oakwood Road, Lake Zurich,  
IL 60047 (800-673-1558). Always check the ECHO Web Site for  
updated information.  
Safety Videos are available from your Echo dealer. A $5.00 shipping charge will be required for each video.  
SAFETY  
Manual Safety Symbols and Important Information  
Throughout this manual and on the product itself, you will find safety alerts and helpful, informational  
messages preceded by symbols or key words. The following is an explanation of those symbols and key  
words and what they mean to you.  
The safety alert symbol accompanied by the word “DANGER” calls attention to an act or condition  
which WILL lead to serious personal injury or death if not avoided.  
The safety alert symbol accompanied by the word “WARNING” calls attention to an act or condition  
which CAN lead to serious personal injury or death if not avoided.  
The safety alert symbol accompanied by the word “CAUTION” calls attention to an act or condition  
which may lead to minor or moderate personal injury if not avoided.  
The enclosed message provides information necessary for the protection of the unit.  
Note: This enclosed message provides tips for use, care and maintenance of the unit.  
CIRCLE AND SLASH SYMBOL  
This symbol means the specific action shown is prohibited. Ignoring these prohibitions can result  
in serious or fatal injury.  
4
X7502026303  
© 6/2014 ECHO Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PE-266/S  
SAFETY  
International Symbols  
Symbol  
Description  
Symbol  
Description  
Symbol  
Description  
Symbol  
Description  
Carburetor  
Adjustment -  
High speed  
mixture  
Warning, See  
Operator’s  
Manual  
DO NOT allow  
flames or  
sparks near fuel  
Ignition  
ON / OFF  
Wear eye, ear  
and head  
protection  
Carburetor  
Adjustment -  
Idle speed  
DO NOT smoke  
near fuel  
Primer Bulb  
Carburetor  
Adjustment -  
Low speed  
mixture  
Choke Control  
“Cold Start”  
Position(Choke  
Closed)  
Wear hand  
and foot  
protection  
Choke Control  
“Run” Position  
(Choke Open)  
Emergency  
Stop  
Keep feet away  
from blade  
RotatingCutting  
Attachment  
Safety/Alert  
Hot Surface  
Fuel and oil  
mixture  
Keep bystanders and helpers  
away 15 m (50 ft.).  
AV O ID K ICK OU T.  
Keep bystanders at least 15 meters  
(50 feet) away.  
Thrown  
objects  
Direction of  
blade  
Beware Thrown Objects  
Wear Eye Protection  
X7502026303  
5
© 6/2014 ECHO Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SAFETY  
PE-266/S  
Personal Condition and Safety Equipment  
Users of this product risk injury to themselves and others if the unit is used improperly and/or safety  
precautions are not followed. Proper clothing and safety gear must be worn when operating unit.  
Physical Condition  
Your judgment and physical dexterity may not be good:  
• if you are tired or sick,  
• if you are taking medication,  
• if you have taken alcohol or drugs.  
Operate unit only if you are physically and mentally well.  
Eye Protection  
Eye protection that meets ANSI Z87.1, CE, or CSA Z94.3 requirements must be worn whenever you operate  
the unit.  
Hand Protection  
Wear no-slip, heavy duty work gloves to improve your grip on the handles. Gloves also reduce the  
transmission of machine vibration to your hands.  
Breathing Protection  
Wear a face mask to protect against dust.  
Hearing Protection  
ECHO recommends wearing hearing protection whenever unit is used.  
Proper Clothing  
Wear snug fitting, durable clothing;  
• Pants should have long legs, shirts with long sleeves.  
• DO NOT WEAR SHORTS,  
• DO NOT WEAR TIES, SCARVES, JEWELRY, or clothing with loose or hanging items that could become  
entangled in moving parts or surrounding growth.  
Wear sturdy work shoes with nonskid soles;  
• DO NOT WEAR OPEN TOED SHOES,  
• DO NOT OPERATE UNIT BAREFOOTED.  
Wear no-slip, heavy duty work gloves.  
Keep long hair away from engine and air intake. Retain hair with cap or net.  
Hot Humid Weather  
Heavy protective clothing can increase operator fatigue which may lead to heat stroke. Schedule heavy work  
for early morning or late afternoon hours when temperatures are cooler.  
6
X7502026303  
© 6/2014 ECHO Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PE-266/S  
SAFETY  
The ignition components of this machine generate an electromagnetic field during operation which  
may interfere with some pacemakers. To reduce the risk of serious or fatal injury, persons with  
pacemakers should consult with their physician and the pacemaker manufacturer before operating  
this machine. In the absence of such information, ECHO does not recommend the use of ECHO  
products by anyone who has a pacemaker.  
Vibration and Cold  
It is believed that a condition called Raynaud’s Phenomenon,  
which affects the fingers of certain individuals, may be brought  
about by exposure to vibration and cold. Exposure to vibration  
and cold may cause tingling and burning sensations, followed  
by loss of color and numbness in the fingers. The following  
precautions are strongly recommended, because the minimum  
exposure, which might trigger the ailment, is unknown.  
• Keep your body warm, especially the head, neck, feet, ankles,  
hands, and wrists.  
• Maintain good blood circulation by performing vigorous arm exercises during frequent work breaks, and  
also by not smoking.  
• Limit the hours of operation. Try to fill each day with jobs where operating the unit or other hand-held  
power equipment is not required.  
• If you experience discomfort, redness, and swelling of the fingers followed by whitening and loss of feeling,  
consult your physician before further exposing yourself to cold and vibration.  
Repetitive Stress Injuries  
It is believed that overusing the muscles and tendons of the  
fingers, hands, arms, and shoulders may cause soreness,  
swelling, numbness, weakness, and extreme pain in those  
areas. Certain repetitive hand activities may put you at a high  
risk for developing a Repetitive Stress Injury (RSI). An extreme  
RSI condition is Carpal Tunnel Syndrome (CTS), which could  
occur when your wrist swells and squeezes a vital nerve that  
runs through the area. Some believe that prolonged exposure to  
vibration may contribute to CTS. CTS can cause severe pain for  
months or even years.  
To reduce the risk of RSI/CTS, do the following:  
• Avoid using your wrist in a bent, extended, or twisted position. Instead try to maintain a straight wrist  
position. Also, when grasping, use your whole hand, not just the thumb and index finger.  
Take periodic breaks to minimize repetition and rest your hands.  
• Reduce the speed and force with which you do the repetitive movement.  
• Do exercise to strengthen the hand and arm muscles.  
• Immediately stop using all power equipment and consult a doctor if you feel tingling, numbness, or pain in  
the fingers, hands, wrists, or arms. The sooner RSI/CTS is diagnosed, the more likely permanent nerve  
and muscle damage can be prevented.  
X7502026303  
7
© 6/2014 ECHO Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SAFETY  
PE-266/S  
All over head electrical conductors and communications wires can have electricity flow with high  
voltages. This unit is not insulated against electrical current. Never touch wires directly or indirectly,  
otherwise serious injury or death may result.  
Do not operate this product indoors or in inadequately ventilated areas. Engine exhaust contains  
poisonous emissions and can cause serious injury or death.  
Read the Manuals  
• Provide all users of this equipment with the Operator’s Manual  
and Safety Manual for instructions on Safe Operation.  
Clear the Work Area  
• Spectators and fellow workers must be warned, and children  
and animals prevented from coming nearer than 15 m (50 ft.)  
while the unit is in use.  
Keep a Firm Grip  
• Always hold throttle handle and support handle with thumbs  
and fingers tightly encircling the handles.  
Keep a Solid Stance  
• Maintain footing and balance at all times. Do not stand on slippery, uneven or unstable surfaces. Do not  
work in odd positions or on ladders. Do not over reach.  
Avoid Hot Surfaces  
• Keep exhaust area clear of flammable debris. Avoid contact  
during and immediately after operation.  
Equipment  
Use only ECHO approved attachments. Serious injury may result from the use of a non-approved  
attachment combination. ECHO, INC. will not be responsible for the failure of cutting devices,  
attachments or accessories which have not been tested and approved by ECHO. Read and comply  
with all safety instructions listed in this manual and safety manual.  
• Check unit for loose/missing nuts, bolts, and screws. Tighten and/or replace as needed.  
• Inspect shield for damage and that shield is securely in place. Replace if sjield is damaged or missing.  
• Check that the cutting attachment is firmly attached and in safe operating condition.  
• Check that support handle is adjusted for safe, comfortable operation. See Assembly Section for proper  
adjustment.  
8
X7502026303  
© 6/2014 ECHO Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PE-266/S  
EMISSION CONTROL (EXHAUST & EVAPORATIVE)  
Moving parts can amputate fingers or cause severe injuries. Keep hands, clothing and loose objects  
away from all openings.  
ALWAYS stop engine, disconnect spark plug, and make sure all moving parts have come to a complete  
stop before removing obstructions, clearing debris, or servicing unit.  
DO NOT start or operate unit unless all guards and protective covers are properly assembled to unit.  
NEVER reach into any opening while the engine is running. Moving parts may not be visible through  
openings.  
Check fuel system for leaks due to fuel tank damage, especially if the unit is dropped. If damage or  
leaks are found, do not use unit, otherwise serious personal injury or property damage may occur.  
Have unit repaired by an authorized servicing dealer before using.  
EMISSION CONTROL (EXHAUST & EVAPORATIVE)  
EPA 2010 and Later and/or C.A.R.B. TIER III  
The emission control system for the engine is EM (engine modification)  
and, if the second to last character of the Engine Family on the Emission  
Control Information label (sample below) is “C”, “K”, or “T”, the emission  
control system is EM and TWC (3-way catalyst). The fuel tank/fuel line  
emission control system is EVAP (evaporative emissions). Evaporative  
emissions for California models are only applicable to fuel tanks.  
An Emission Control Label is located on the engine. (This is an  
EXAMPLE ONLY, information on label varies by engine FAMILY).  
Product Emission Durability (Emission Compliance Period)  
The 50 or 300 hour emission compliance period is the time span  
selected by the manufacturer certifying the engine emissions output  
meets applicable emissions regulations, provided that approved  
maintenance procedures are followed as listed in the Maintenance Section of this manual.  
X7502026303  
9
© 6/2014 ECHO Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DESCRIPTION  
PE-266/S  
DESCRIPTION  
Locate the safety decal(s) on your unit. Make sure the decal(s) is legible and that you understand and follow  
the instructions on it. If a decal cannot be read, a new one can be ordered from your ECHO dealer. See  
PARTS ORDERING instructions for specific information.  
11  
12  
6
19  
13  
14  
5
PE-266  
4
18  
3
2
7
1
8
17  
15  
16  
9
10  
6
5
PE-266S  
4
3
7
2
1
8
9
10  
Hot Label  
Shaft Label  
10  
X7502026303  
© 6/2014 ECHO Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PE-266/S  
DESCRIPTION  
1. POWER HEAD - Includes the Engine, Clutch, Fuel System, Ignition System and Recoil Starter.  
2. THROTTLE TRIGGER LOCKOUT - This lever must be held during starting. Operation of the throttle  
trigger is prevented unless throttle trigger lockout lever is engaged.  
3. STOP SWITCH - “SLIDE SWITCH” mounted on top of the Throttle Handle. Move switch FORWARD to  
RUN, BACK to STOP.  
4. SUPPORT HANDLE - FOR LEFT HAND - The support handle can be repositioned for comfortable  
operation by loosening the screws and moving the handle  
5. DEBRIS SHIELD/FLAP - Mounted over the cutting attachment. Helps protect operator by deflecting  
debris produced during the edging operation.  
6. BLADE - Rotates to provide cutting action.  
7. WHEEL - Adjustable up/down, sets depth of blade.  
8. DRIVE SHAFT ASSEMBLY - Contains a specially designed liner and the flexible drive shaft.  
9. THROTTLE TRIGGER - Controls engine speed. Spring loaded to return to idle when released. During  
acceleration, press trigger gradually for best operating technique.  
10. THROTTLE HANDLE - FOR RIGHT HAND - Contains the Stop Switch and Throttle Trigger.  
11. SPARK PLUG - Provides spark to ignite fuel mixture.  
12. TOP GUARD - Protects arm from the hot engine.  
13. RECOIL STARTER HANDLE - Pull handle slowly until starter engages, then quickly and firmly. When  
engine starts, return handle slowly. DO NOT let handle snap back or damage to unit will occur.  
14. SPARK ARRESTOR MUFFLER OR SPARK ARRESTOR MUFFLER WITH CATALYST - The muffler or  
catalytic muffler controls exhaust noise and emission. The spark arrestor screen prevents hot, glowing  
particles of carbon from leaving the muffler. Keep exhaust area clear of flammable debris.  
15. FUEL TANK - Contains fuel and fuel filter.  
16. FUEL TANK CAP - Covers and seals fuel tank opening.  
17. CHOKE - The choke control is located at the rear of the air cleaner housing. Move choke lever to Cold  
Start (  
) to close choke for cold start. Move choke lever to “Run” (  
) position to open choke.  
18. AIR CLEANER - Contains replaceable filter element.  
19. PURGE BULB - Pumping purge bulb before starting engine draws fresh fuel from the fuel tank, purging  
air from the carburetor. Pump purge bulb until fuel is visible and flows freely in the clear fuel tank return  
line. Pump purge bulb an additional 4 or 5 times.  
X7502026303  
11  
© 6/2014 ECHO Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTENTS  
PE-266/S  
CONTENTS  
The ECHO product you purchased has been factory pre-assembled for your convenience. Due to packaging  
restrictions, shield installation and other assembly may be necessary.  
After opening the carton, check for damage. Immediately notify your retailer or ECHO Dealer of damaged or  
missing parts. Use the contents list to check for missing parts.  
____ 1 - Power Head  
____ 1 - Drive Shaft Assembly  
____ 1 - Operator's Manual  
____ 1 - Safety Manual  
____ 1 - Emission Control Warranty Statement  
____ 1 - Warranty Registration Card  
____ 1 - Support Handle  
____ 1 - Lower Bracket, Support Handle  
____ 4 - 5 x 35 mm screws  
____ 2 - Split Pins  
____ 1 - Safety Glasses  
____ - Assembly Tools (s)  
12  
X7502026303  
© 6/2014 ECHO Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PE-266/S  
ASSEMBLY  
ASSEMBLY  
Drive Shaft/Power Head  
Parts Required:  
Power Head, Drive Shaft Assembly  
1. Stand power head upright on a level surface.  
2. Loosen the drive shaft clamp bolt (A) at engine drive shaft  
clamp.  
3. Remove dust cap if necessary, and carefully fit drive shaft  
assembly to engine making sure that inner drive shaft  
engages into clutch mount.  
Note: Gear Housing must be aligned properly with engine.  
4. Tighten drive shaft clamp bolt (A) securely.  
A
5. Route throttle linkage and ignition lead assembly below fan  
housing.  
Throttle Linkage and Ignition Leads  
C
1. Close choke and remove air filter cover.  
E
2. Place throttle linkage (C) through adjustment fixture (D) and  
install wire end into large carburetor throttle swivel hole (E).  
Check throttle for freedom of movement and that wide open  
throttle / low idle extremes are adjusted properly. The  
throttle linkage must be adjusted by moving the adjustment  
fixture (D). Consult with your Echo Dealer for correct  
adjustment procedure.  
D
3. Connect 2 ignition stop leads (F, G) from throttle cable  
tubing to 2 ignition leads (F, G) on engine.  
G
F
X7502026303  
13  
© 6/2014 ECHO Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ASSEMBLY  
PE-266/S  
4. Secure ignition leads behind air filter case with clip (H).  
5. Install air filter and cover.  
H
Support Handle  
1. If necessary, position support handle for comfortable  
operation and securely tighten screws.  
Note: Label shows minimum spacing for support handle  
location.  
14  
X7502026303  
© 6/2014 ECHO Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PE-266/S  
OPERATION  
OPERATION  
Moving parts can amputate fingers or cause severe injuries. Keep hands, clothing and loose objects  
away from all openings. Always stop engine, disconnect spark plug, and make sure all moving parts  
have come to a complete stop before removing obstructions, clearing debris, or servicing unit.  
Operation of this equipment may create sparks that can start fires. This unit is equipped with a spark  
arrestor to prevent discharge of hot particles from the engine. Metal cutters can can create sparks if  
the cutter strikes rocks, metal, or other hard objects. Contact local fire authorities for laws or  
regulations regarding fire prevention requirements.  
Fuel  
Alternative fuels, such as E-15 (15% ethanol), E-85 (85% ethanol) or any fuels not meeting ECHO  
requirements are NOT approved for use in ECHO 2-stroke gasoline engines. Use of alternative fuels  
may cause performance problems, loss of power, overheating, fuel vapor lock, and unintended  
machine operation, including, but not limited to, improper clutch engagement. Alternative fuels may  
also cause premature deterioration of fuel lines, gaskets, carburetors and other engine components.  
Fuel Requirements  
Gasoline - Use 89 Octane [R+M/2] (mid grade or higher) gasoline known to be good quality. Gasoline may  
contain up to 10% Ethanol (grain alcohol) or 15% MTBE (methyl tertiary-butyl ether). Gasoline containing  
methanol (wood alcohol) is NOT approved. ECHO brand Power Fuelis 93 octane, ethanol-free fuel  
premixed with ECHO Red Armor® engine oil at 50:1 ratio. Use of ECHO Power Fuelis recommended to  
extend engine life in all air-cooled 2-stroke and 2/4-stroke hybrid engines.  
Two Stroke Oil - A two-stroke engine oil meeting ISO-L-EGD (ISO/CD 13738) and J.A.S.O. FD Standards  
must be used. Echo brand premium Power Blend XUniversal 2-Stroke Oil meets these standards. Engine  
problems due to inadequate lubrication caused by failure to use an ISO-L-EGD (ISO/CD 13738) and  
J.A.S.O. FD certified oil, such as Echo premium Power Blend X, will void the two-stroke engine warranty.  
Echo premium Power Blend XUniversal 2-Stroke Oil may be mixed at 50:1 ratio for application in all Echo  
engines sold in the past regardless of ratio specified in those manuals.  
Handling Fuel  
Fuel is VERY flammable. Use extreme care when mixing, storing or handling, or serious personal  
injury may result.  
Use an approved fuel container.  
DO NOT smoke near fuel.  
DO NOT allow flames or sparks near fuel.  
X7502026303  
15  
© 6/2014 ECHO Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION  
PE-266/S  
Fuel tanks/cans may be under pressure. Always loosen fuel caps slowly allowing pressure to  
equalize.  
NEVER refuel a unit when the engine is HOT or RUNNING!  
DO NOT fill fuel tanks indoors. ALWAYS fill fuel tanks outdoors over bare ground.  
DO NOT overfill fuel tank. Wipe up spills immediately.  
Securely tighten fuel tank cap and close fuel container after refueling.  
Inspect for fuel leakage. If fuel leakage is found, do not start or operate unit until leakage is  
repaired.  
Move at least 3m (10 ft.) from refueling location before starting the engine.  
Mixing Instructions  
1. Fill an approved fuel container with half of the required  
amount of gasoline.  
2. Add the proper amount of 2-stroke oil to gasoline.  
3. Close container and shake to mix oil with gasoline.  
4. Add remaining gasoline, close fuel container, and remix.  
Spilled fuel is a leading cause of hydrocarbon emissions. Some  
states may require the use of automatic fuel shut-off containers  
to reduce fuel spillage.  
For more information  
scan this QR code.  
After use  
• DO NOT store a unit with fuel in its tank. Leaks can occur.  
Return unused fuel to an approved fuel storage container.  
Storage - Fuel storage laws vary by locality. Contact your local government for the laws affecting your area.  
As a precaution, store fuel in an approved, airtight container. Store in a well-ventilated, unoccupied building,  
away from sparks and flames.  
Stored fuel ages. Do not mix more fuel than you expect to use in thirty (30) days, ninety (90) days when a  
fuel stabilizer is added.  
Stored two-stroke fuel may separate. ALWAYS shake fuel container thoroughly before each use.  
16  
X7502026303  
© 6/2014 ECHO Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PE-266/S  
OPERATION  
Starting Cold Engine  
The attachment will operate immediately when the engine starts, and could result in possible  
serious injury. Keep movable parts of the attachment away from objects that could become  
entangled or thrown, and surfaces that could cause loss of control.  
1. Stop Switch  
Move stop switch (A) away from the STOP position.  
A
2. Choke  
Move choke lever (B) to Cold Start Position (  
).  
3. Purge Bulb  
B
C
Pump purge bulb (C) until fuel is visible and flows freely in the  
clear fuel tank return line. Pump bulb an additional 4 or 5  
times.  
D
4. Recoil Starter  
Lay the unit on a flat area and keep movable attachment parts  
clear of all obstacles. Firmly grasp throttle handle and throttle  
trigger lockout with left hand and fully depress throttle trigger  
to wide open position. Rapidly pull recoil starter handle/rope  
(D) until engine fires (or maximum five [5] pulls).  
5. Choke  
After engine fires (or 5 pulls), move choke (B) to the Run  
D
(
)(open)position. Firmlygraspthrottlehandleandthrottle  
trigger lockout with left hand and fully depress throttle trigger  
to wide open position. Pull starter handle/rope until engine  
starts and runs. Release throttle trigger and allow unit to warm up at idle for several minutes.  
Note: If engine does not start with choke in “Run” position after 5 pulls, repeat instructions 2 - 5.  
6. Throttle Trigger  
After engine warm-up, grip the throttle handle and support handle. Depress the throttle trigger lockout, and  
gradually depress throttle trigger to increase engine RPM to operating speed.  
X7502026303  
17  
© 6/2014 ECHO Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION  
PE-266/S  
Starting Warm Engine  
A
The starting procedure is the same as Cold Start except DO  
NOT close the choke, and do not depress throttle trigger to wide  
open position.  
The attachment should not move at idle, otherwise serious  
personal injury may result.  
Note: If attachment moves, readjust carburetor according to  
“Carburetor Adjustment” instructions in this manual or  
see your ECHO Dealer.  
1. Stop Switch  
Move stop switch (A) away from the STOP position.  
2. Purge Bulb  
Pump purge bulb (C) until fuel is visible and flows freely in the  
clear fuel tank return line. Pump bulb an additional 4 or 5  
times.  
B
C
D
3. Recoil Starter  
Lay the unit on a flat area and keep movable attachment parts  
clear of all obstacles. Firmly grip throttle handle and throttle  
trigger lockout with left hand. Rapidly pull recoil starter  
handle/rope (D) until engine fires.  
Note: If engine does not start after 5 pulls, use Cold Start  
Procedure.  
D
Stopping Engine  
A
1. Throttle  
Release throttle and allow engine to return to idle before  
shutting off engine.  
2. Stop Switch  
Move stop switch (A) to STOP position.  
If engine does not stop when stop switch is moved to STOP  
position, close choke - COLD START position - to stall  
engine. Have your ECHO dealer repair stop switch before using unit again.  
18  
X7502026303  
© 6/2014 ECHO Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PE-266/S  
OPERATION  
Operation Techniques  
Engine exhaust IS HOT, and contains Carbon Monoxide (CO), a poison gas. Breathing CO can cause  
unconsciousness, serious injury, or death. Exhaust can cause serious burns. ALWAYS position  
unit so that exhaust is directed away from your face and body.  
1. Before edging, water the area to soften the ground to make  
edging easier.  
2. Before edging, check the area and remove all obstacles and  
objects that could be thrown.  
3. Plan to edge regularly to make it easier to keep a neat edge  
and to avoid having to make more than one pass.  
Note: Blade depth may have to be adjusted due to differences  
in height between the hard surface and the top of the  
grass.  
Never adjust blade height with engine running, otherwise serious personal injury may result.  
4. Loosen adjustment knob and adjust the blade's depth of cut  
to produce a fine cut between sidewalk and grass using a  
minimum blade depth, usually with about 13 mm (1/2 in.) of  
the blade into the ground. Tighten adjustment knob.  
5. Before edging, plan your direction of travel so that the unit  
will always be positioned on your right side and so that you  
walk on a hard surface whenever possible.  
6. Hold edger as shown.  
Before edging, be sure to read and understand the entire  
Operator's Manual to avoid serious injury.  
7. When starting to edge, run the engine at full throttle, and  
lower the blade gently into the ground, being careful not to  
hit the concrete with the blade.  
8. Don't force the blade. Move only as quickly as the blade will  
allow.  
The complete unit, specifically the drive shaft assembly  
and muffler exhaust area may become very hot during use.  
Avoid contact during and immediately after operation,  
otherwise serious personal injury may result.  
X7502026303  
19  
© 6/2014 ECHO Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MAINTENANCE  
PE-266/S  
MAINTENANCE  
Moving parts can amputate fingers or cause severe injuries. Keep hands, clothing and loose objects  
away from all openings. Always stop engine, disconnect spark plug, and make sure all moving parts  
have come to a complete stop before removing obstructions, clearing debris, or servicing unit.  
Allow unit to cool before performing service. Wear gloves to protect hands from sharp edges and  
hot surfaces.  
Your ECHO unit is designed to provide many hours of trouble free service. Regular scheduled maintenance  
will help your unit achieve that goal. If you are unsure or are not equipped with the necessary tools, you may  
want to take your unit to an ECHO Service Dealer for maintenance. To help you decide whether you want to  
DO-IT-YOURSELF or have the ECHO Dealer do it, each maintenance task has been graded. If the task is  
not listed, see your ECHO Dealer for repairs.  
Skill Levels  
Level 1 = Easy to do. Common tools may be required.  
Level 2 = Moderate difficulty. Some specialized tools may be required.  
ECHO offers REPOWERTM Maintenance Kits and Parts to make your maintenance job easier.  
Maintenance Intervals  
DAILY  
REQ’D  
MAINTENANCE  
PROCEDURE  
OR  
EVERY  
3
COMPONENT/SYSTEM  
SKILL  
YEARLY  
BEFORE REFUEL MONTHS  
USE  
LEVEL  
Air Filter  
Inspect/Clean  
1
1
1
1
1
1
2
2
2
I / C *  
I / C  
R *  
Choke Shutter  
Fuel Filter  
Inspect/Clean  
Inspect/Replace  
Inspect/Replace  
Inspect/Replace  
Inspect/Clean  
I *  
I *  
I / R *  
R *  
Fuel Cap Gasket  
Fuel System  
I *  
I *  
Spark Plug  
I / C / R *  
Cooling System  
Muffler Spark Arrestor  
Cylinder Exhaust Port  
Inspect/Clean  
I / C  
Inspect/Clean/Replace  
Inspect/Clean/Decarbon  
I / C / R *  
I / C  
Drive Shaft  
(Flex Cable Models)  
Grease  
2
I (1)  
I (2)  
Gear Housing  
Grease  
2
1
1
Recoil Starter Rope  
Screws/Nuts/Bolts  
Inspect/Clean  
Inspect/Tighten/Replace  
I / C *  
I *  
MAINTENANCE PROCEDURE LETTER CODES: I = INSPECT, R = REPLACE, C = CLEAN  
IMPORTANT NOTE - Time intervals shown are maximum. Actual use and your experience will determine the  
frequency of required maintenance.  
MAINTENANCE PROCEDURE NOTES:  
(1) Apply POWER BLENDXTM grease every 25 hours of use.  
(2) Apply POWER BLENDXTM grease every 50 hours of use.  
20  
X7502026303  
© 6/2014 ECHO Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PE-266/S  
MAINTENANCE  
* Replacement is recommended based on the finding of damage or wear during inspection.  
Air Filter  
Level 1  
REPOWERTM AIR & FUEL FILTER KIT.  
Parts Required:  
1. Close choke (Cold Start Position [  
]). This prevents dirt  
from entering the carburetor throat when the air filter is  
removed. Brush accumulated dirt from air cleaner area.  
2. Remove air filter cover and air filter retainer from inside  
cover. Brush dirt from inside cover.  
3. Replace filter if it is damaged, very dirty, or the rubber sealing edges are deformed.  
4. Remove foam pre-filter and air filter and clean as indicated  
below:  
Foam Pre-filter  
• Clean foam filter in water/detergent solution and rinse with  
clean water.  
• Wrap the filter in a clean, dry cloth and squeeze (do not  
wring) dry. Allow to dry completely before reuse. Do not oil.  
Dual Layer Air Filter  
• Lightly brush debris from filter.  
• Soak heavily soiled filters in water/detergent solution to loosen dirt, then brush lightly.  
• Rinse with clean water and allow to dry completely before reuse.  
5. Place foam pre-filter over raised center and inside outer lip of air filter. Install air filter in air filter case.  
6. Install air filter retainer on post in air filter cover, flat side up.  
7. Install air filter cover and tighten cover knob securely.  
Fuel Filter  
Level 1  
REPOWERTM AIR & FUEL FILTER KIT.  
Parts Required:  
Fuel is VERY flammable. Use extreme care when mixing,  
storing or handling, or serious personal injury may result.  
1. Use a clean rag to remove loose dirt from around fuel cap  
and empty fuel tank.  
2. Use a hook to pull the fuel line and filter from the tank.  
3. Remove the filter from the line and install the new filter.  
X7502026303  
21  
© 6/2014 ECHO Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MAINTENANCE  
PE-266/S  
Note: Federal EPA regulations require all model year 2012 and later gasoline powered engines produced for  
sale in the United States to be equipped with a special low permeation fuel supply hose between the  
carburetor and fuel tank. When servicing model year 2012 and later equipment, only fuel supply  
hoses certified by EPA can be used to replace the original equipment supply hose. Fines up to  
$37,500 may be enforced for using an un-certified replacement part.  
Spark Plug  
Level 2  
REPOWERTM Tune-Up Kit  
Parts Required:  
Use only NGK BPM-8Y spark plug (BPMR-8Y in Canada)  
otherwise severe engine damage may occur.  
.65 mm (.026 in.)  
1. Remove spark plug and check for fouling, worn and rounded  
center electrode.  
2. Clean the plug or replace with a new one. DO NOT sand blast to clean. Remaining sand will damage  
engine.  
3. Adjust spark plug gap by bending outer electrode.  
4. Tighten spark plug to 150–170 kgf • cm (130–150 in • lbf).  
Cooling System  
Level 2  
Parts Required: None if you are careful.  
To maintain proper engine operating temperatures, cooling air must pass freely through the cylinder fin area.  
This flow of air carries combustion heat away from the engine.  
Overheating and engine seizure can occur when:  
• Air intakes are blocked, preventing cooling air from reaching  
the cylinder.  
• Dust and grass build up on the outside of the cylinder. This  
build up insulates the engine and prevents the heat from  
leaving.  
Removal of cooling passage blockages or cleaning of cooling  
fins is considered “Normal Maintenance.Any failure attributed  
to lack of maintenance is not warranted.  
22  
X7502026303  
© 6/2014 ECHO Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PE-266/S  
MAINTENANCE  
1. Remove spark plug lead.  
2. Remove air cleaner cover.  
3. Remove muffler cover (A).  
4. Remove engine cover (B).  
A
DO NOT use a metal scraper to remove dirt from the cylinder fins.  
B
5. Use brush to remove dirt from the cylinder fins.  
6. Remove grass and leaves from the grid between the recoil  
starter and fuel tank.  
7. Assemble components in reverse order.  
Exhaust System  
Spark Arrestor Screen  
Level 2  
A
Parts Required: Spark Arrestor Screen, Gasket  
1. Remove spark plug lead.  
2. Remove muffler cover (A).  
C
3. Place piston at Top Dead Center (TDC) to prevent  
carbon/dirt from entering cylinder.  
D
B
4. Remove spark arrestor screen (D), gasket (C) and exhaust  
guide (B) from muffler body.  
5. Clean carbon deposits from muffler components.  
Note: When cleaning carbon deposits, be careful not to damage the catalytic element inside muffler.  
6. Replace screen if it is cracked, plugged, or has holes burned through.  
7. Assemble components in reverse order.  
X7502026303  
23  
© 6/2014 ECHO Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MAINTENANCE  
PE-266/S  
Exhaust Port Cleaning  
Level 2  
B
A
Parts Required: As needed; Heat Shield  
1. Remove spark plug lead from spark plug, and remove  
engine cover.  
2. Place piston at top dead center. Remove muffler (A) and  
heat shield (B).  
3. Use a wood or plastic scraping tool to clean deposits from  
cylinder exhaust port.  
Never use a metal tool to scrape carbon from the exhaust port. Do not scratch the cylinder or piston when  
cleaning the exhaust port. Do not allow carbon particles to enter the cylinder.  
4. Inspect heat shield, and replace if damaged.  
5. Install heat shield and muffler.  
6. Tighten muffler mounting bolts (or nuts) to 90–110 kgf • cm  
(80–95 in • lbf).  
7. Install engine cover and attach spark plug lead.  
8. Start engine, and warm to operating temperature.  
9. Stop engine, and re-tighten mounting bolts (or nuts) to  
specifications.  
Carburetor Adjustment  
Level 2  
Engine Break-In  
New engines must be operated a minimum duration of two tanks of fuel break-in before carburetor  
adjustments can be made. During the break-in period your engine performance will increase and exhaust  
emissions will stabilize. Idle speed can be adjusted as required.  
High Altitude Operation  
This engine has been factory adjusted to maintain satisfactory starting, emission, and durability  
performance up to 1,100 feet above sea level (ASL) (96.0 kPa). To maintain proper engine operation and  
emission compliance above 1,100 feet ASL the carburetor may need to be adjusted by an authorized ECHO  
service dealer.  
If the engine is adjusted for operation above 1,100 feet ASL, the carburetor must be re-adjusted when  
operating the engine below 1,100 feet ASL, otherwise severe engine damage may result.  
Parts  
None  
Required:  
24  
X7502026303  
© 6/2014 ECHO Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PE-266/S  
MAINTENANCE  
Note: Every unit is run at the factory and the carburetor is set in compliance with emission regulations.  
Carburetor adjustments, other than idle speed, must be performed by an authorized ECHO dealer.  
1. Check idle speed and reset if necessary. If a tachometer is  
available, idle speed screw (A) should be set to the  
specifications found on “Specifications” page of this manual.  
Turn idle screw (A) clockwise to increase idle speed;  
counterclockwise to decrease idle speed.  
A
When carburetor adjustment is completed, the cutting  
attachment should not move at idle, otherwise serious  
personal injury may result.  
Lubrication  
Level 1.  
POWER BLENDXTM 8 oz. or Lithium Base  
Grease.  
Parts  
Required:  
Note: Your debris shield may appear different than the debris  
shield shown.  
Gear Housing  
B
1. Remove plug (A) and add grease to gear housing. Do not  
over-fill.  
A
2. Replace plug and tighten securely.  
C
Drive Shaft  
B
1. Loosen two (2) screws (B) and remove center locating  
screw (C). Pull gear box and shield from drive shaft housing.  
A
2. Pull flexible cable from the drive shaft housing, wipe clean  
and re-coat with a thin coating [15 ml (1/2 oz.)] of grease.  
3. Slide the flexible cable back in the drive housing. DO NOT  
get dirt on the flex cable.  
C
4. Install the gear housing and shield assembly. Align locating  
screw hole with hole in drive shaft housing.  
5. Tighten screws securely.  
X7502026303  
25  
© 6/2014 ECHO Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MAINTENANCE  
PE-266/S  
Blade Replacement  
Level 1.  
Parts Required:  
Blade, new split pin  
Note: Replace blade when it is bent, damaged, or worn shorter than 6 inches.  
G
1. Remove split pin (A).  
2. Align hole in inner blade adapter (B) with notch in gear  
housing, and insert locking tool (G) to prevent PTO shaft (C)  
from rotating.  
B
C
3. Remove L.H. blade nut (D) by turning clockwise. Remove  
outer blade adapter (E), and blade (F).  
F
4. Install and center blade (F) on inner blade adapter (B).  
E
5. Install outer adapter (E) and nut (D). Tighten nut (D) firmly,  
turning counterclockwise.  
D
A
Note: Never reuse old split pin.  
6. Install new split pin (A) to secure nut, and bend both legs of  
pin counterclockwise around PTO shaft (C).  
26  
X7502026303  
© 6/2014 ECHO Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PE-266/S  
TROUBLESHOOTING  
TROUBLESHOOTING  
ENGINE PROBLEM TROUBLESHOOTING CHART  
Problem  
Check  
Status  
Cause  
Remedy  
Fuel strainer clogged  
Fuel line clogged  
Carburetor  
Clean or replace  
Clean or replace  
See your Echo dealer  
Fuel at carburetor No fuel at carburetor  
No fuel at cylinder  
Carburetor  
See your Echo dealer  
Open choke  
Fuel at cylinder  
Clean/replace air filter  
Adjust carburetor  
See your Echo dealer  
Muffler wet with fuel  
Fuel Mixture too rich  
Enginecranks-  
starts hard/  
doesn’t start  
Stop switch off  
Electrical problem  
Interlock switch  
Turn switch to ON  
See your Echo dealer  
See your Echo dealer  
Spark at end of  
No spark  
plug wire  
Spark gap incorrect  
Covered with carbon  
Fouled with fuel  
Adjust to .65mm (0.026 in.)  
Clean or replace  
Clean or replace  
Spark at plug  
No spark  
Plug defective  
Replace plug  
Air filter  
Air filter dirty  
Normal wear  
Clean or replace  
Contaminants/residues  
in fuel  
Fuel filter  
Fuel filter dirty  
Replace  
Contaminants/residues  
in fuel  
Engine runs,  
but dies or  
does not  
accelerate  
properly  
Fuel vent  
Fuel vent plugged  
Clean or replace  
Spark Plug  
Carburetor  
Plug dirty/worn  
Normal wear  
Vibration  
Clean and adjust or replace  
Adjust  
Improper adjustment  
Cooling system  
dirty/plugged  
Extended operation in  
dirty/dusty locations  
Cooling System  
Clean  
Spark Arrestor  
Screen  
Spark arrestor screen  
plugged  
Normal wear  
Replace  
Engine does  
not crank  
N/A  
N/A  
Internal engine problem See your Echo dealer  
Fuel vapors are extremely flammable and may cause fire and/or explosion. Never test for ignition  
spark by grounding spark plug near cylinder plug hole, otherwise serious personal injury may  
result.  
X7502026303  
27  
© 6/2014 ECHO Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
STORAGE  
PE-266/S  
STORAGE  
During operation the muffler or catalytic muffler and surrounding cover become hot. Always keep  
exhaust area clear of flammable debris during transportation or when storing, otherwise serious  
property damage or personal injury may result.  
Long Term Storage (Over 30 Days)  
Do not store your unit for a prolonged period of time (30 days or longer) without performing protective  
storage maintenance which includes the following:  
1. Store unit in a dry, dust free place, out of the reach of children.  
Do not store in enclosure where fuel fumes may accumulate or reach an open flame or spark.  
2. Place the stop switch in the “OFF” position.  
3. Remove accumulation of grease, oil, dirt and debris from exterior of unit.  
4. Perform all periodic lubrication and services that are required.  
5. Tighten all the screws and nuts.  
6. Drain fuel tank completely. Press purge bulb 6-7 times to remove remaining fuel from carburetor then  
drain the tank again. Close choke, start and run the engine until it stops due to lack of fuel.  
7.  
a. Allow engine to cool then remove the spark plug and pour 7 cc (1/4 oz.) of fresh, clean, two-stroke  
engine oil into the cylinder through the spark plug hole.  
b. Pull the recoil starter handle 2-3 times to distribute the oil inside the engine.  
c. Observe the piston location through the spark plug hole. Pull the recoil handle slowly until the piston  
reaches the top of its travel and leave it there.  
8. Install the spark plug (do not connect ignition cable).  
28  
X7502026303  
© 6/2014 ECHO Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PE-266/S  
SPECIFICATIONS  
SPECIFICATIONS  
MODEL  
Length (PE-266)  
PE-266, PE-266S  
1760 mm (69.3 in.)  
1782 mm (70.16 in.)  
250 mm (9.85 in.)  
254 mm (10.0 in.)  
315 mm (12.4 in.)  
335 mm (13.19 in.)  
6.61 kg (14.6 lb.)  
Length (PE-266S)  
Width (PE-266)  
Width (PE-266S)  
Height (PE-266)  
Height (PE-266S)  
Weight (dry) w/Cutter Head (PE-266)  
Weight (dry) w/Cutter Head (PE-266S) 6.9 kg (15.26 lb.)  
Engine Type  
Bore  
Air cooled, two-stroke, single cylinder gasoline engine  
34.0 mm (1.34 in.)  
Stroke  
28.0 mm (1.10 in.)  
Displacement  
Exhaust  
25.4 cc (1.55 cu. in.)  
Spark arrestor muffler or spark arrestor muffler with catalyst  
Diaphragm w/purge pump  
Carburetor  
Ignition System  
Spark Plug  
Fuel  
Flywheel magneto, capacitor discharge ignition type  
NGK BPM-8Y (Gap 0.65 mm (0.026 in.)  
Mixed (Gasoline and Two-stroke Oil)  
50 : 1 Power Blend XTM ISO-L-EGD (ISO/CD 13738) and J.A.S.O. M345- FD, two-stroke,  
air-cooled engine oil.  
Fuel/Oil Ratio  
Gasoline  
Use 89 Octane unleaded. Do not use fuel containing methyl alcohol, more than 10% ethyl  
alcohol or 15% MTBE. Do not use alternative fuels such as E-15 or E-85.  
Oil  
Power Blend XTM Premium Universal 2-Stroke Oil  
0.5 lit. (16.9 US fl. oz.)  
Automatic Rewind Starter  
Centrifugal Type  
Fuel Tank Capacity  
Starter System  
Clutch  
Drive Shaft  
6.35 mm (1/4 in.) flexible shaft  
2.07:1 Reduction  
Gear Case Ratio  
Rotating Direction  
Shield  
Clockwise; viewed from right side  
Open anti-clog  
Standard Cutter Head  
Blade Length  
Metal blade  
203.2 mm (8.0 in.)  
Blade Width  
50.8 mm (2 in.)  
Blade Thickness  
Handle  
Standard 2.3 mm (0.090 in.), Premium 4.6 mm (0.181 in.)  
Front D-loop, Rear - Grip  
Rubber Cushion  
Vibration Reduction  
Idle Speed  
2,900 RPM  
Clutch Engagement Speed  
Wide Open Throttle Speed (W.O.T.)  
3,900 RPM  
10,250 RPM  
X7502026303  
29  
© 6/2014 ECHO Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WARRANTY STATEMENTS  
PE-266/S  
WARRANTY STATEMENTS  
ECHO LIMITED WARRANTY STATEMENT FOR  
PRODUCT SOLD IN USA AND CANADA BEGINNING 01/01/2010  
ECHO'S RESPONSIBILITY  
ECHO Incorporated’s Limited Warranty, provides to the original purchaser that this ECHO product is free from defects in material and workmanship.  
Under normal use and maintenance from date of purchase, ECHO agrees to repair or replace at ECHO’s discretion, any defective product  
free of charge at any authorized ECHO servicing dealer within listed below application time periods, limitations and exclusions. THIS LIMITED  
WARRANTY IS ONLYAPPLICABLE TO ECHO PRODUCTS SOLD BYAUTHORIZED ECHO DEALERS. IT IS EXTENDED TO THE ORIGINAL  
PURCHASER ONLY, AND IS NOT TRANSFERABLE TO SUBSEQUENT OWNERS EXCEPT FOR EMISSION RELATED PARTS. Repair  
parts and accessories replaced under this warranty are warranted only for the balance of the original unit or accessory warranty period. Any  
damage caused by improper installation or improper maintenance is not covered by this warranty. All parts or products replaced under warranty  
become the property of ECHO, Inc. This warranty is separate from the Emission control warranty statement supplied with your new product.  
Please consult the Emission Control Warranty Statement for details regarding emission related parts. For a list of Authorized ECHO Dealers  
refer to WWW.ECHO-USA.COM or call 1-800-432-ECHO.  
OWNER’S RESPONSIBILITY  
To ensure trouble free warranty coverage it is important that you register your ECHO equipment on-line at WWW.ECHO-USA.COMꢀRUꢀE\ꢀ¿OO-  
LQJꢀRXWꢀWKHꢀZDUUDQW\ꢀUHJLVWUDWLRQꢀFDUGꢀVXSSOLHGꢀZLWKꢀ\RXUꢀXQLWꢁꢀ5HJLVWHULQJꢀ\RXUꢀSURGXFWꢀFRQ¿UPVꢀ\RXUꢀZDUUDQW\ꢀFRYHUDJHꢀDQGꢀSURYLGHVꢀDꢀGLUHFWꢀ  
OLQNꢀLIꢀZHꢀ¿QGꢀLWꢀQHFHVVDU\ꢀWRꢀFRQWDFWꢀ\RXꢁ  
The owner shall demonstrate reasonable care and use, and follow preventative maintenance, storage, fuel and oil usage as prescribed in the  
RSHUDWRU¶VꢀPDQXDOꢁꢀ6KRXOGꢀDꢀSURGXFWꢀGLI¿FXOW\ꢀRFFXUꢂꢀ\RXꢀPXVWꢂꢀDWꢀ\RXUꢀH[SHQVHꢂꢀGHOLYHUꢀRUꢀVKLSꢀ\RXUꢀ(&+2ꢀXQLWꢀWRꢀDQꢀDXWKRUL]HGꢀ(&+2ꢀVHUYLFLQJꢀ  
dealer for warranty repairs (within the applicable warranty period), and arrange for pick-up or return of your unit after the repairs have been  
made. For your nearest authorized ECHO servicing dealer, call ECHO’s Dealer Referral Center, at 1-800-432-ECHO or you can locate an ECHO  
servicing dealer at WWW.ECHO-USA.COM. Should you require assistance or have questions concerning ECHO’s Warranty Statement, you  
can contact our Consumer Product Support Department at 1-800-673-1558 or contact us through the web at WWW.ECHO-USA.COM.  
PRODUCT WARRANTY PERIOD  
RESIDENTIAL APPLICATION  
‡ꢀꢀ 5 YEAR WARRANTY - All units for residential, or non-income producing use will be covered by this limited warranty for ¿YH ꢀꢁꢂꢃ\HDUV from  
date of purchase.  
EXCEPTIONS:  
‡ꢀ )RUꢀWZRꢃVWURNHꢀHQJLQHꢀSRZHUHGꢀSURGXFWVꢂꢀWKHꢀHOHFWURQLFꢀLJQLWLRQꢀPRGXOHꢂꢀÀH[LEOHꢀGULYHꢀFDEOHVꢂꢀ650ꢀVROLGꢀGULYHꢀVKDIWVꢂꢀDQGꢀ7&ꢀWLQHVꢀ  
are warranted for the OLIHꢄ of the product on parts only.  
‡ꢀ &XWWLQJꢀDWWDFKPHQWVꢀVXFKꢀDVꢂꢀEXWꢀQRWꢀOLPLWHGꢀWRꢂꢀEDUVꢂꢀFKDLQVꢂꢀVSURFNHWVꢂꢀEODGHVꢂꢀDQGꢀQ\ORQꢀWULPPHUꢀKHDGVꢀIRUꢀUHVLGHQWLDOꢀRUꢀQRQꢃLQFRPHꢀ  
producing use will be covered for failures due to defects in material or workmanship for a period of ꢅꢆꢃGD\V from original product  
purchase date. Any misuse from contact with concrete, rocks, or other structures is not covered by this warranty.  
‡ꢀꢀ (&+2¶Vꢀ5DSLGꢀ/RDGHUꢀ6WULQJꢀ+HDGꢀFDUULHVꢀDꢀOLIHWLPHꢀZDUUDQW\ꢀRQꢀWKHꢀOLQHꢀORFNLQJꢀV\VWHPꢂꢀSDUWVꢀRQO\ꢄꢀQRꢀODERUꢁꢀ5HIHUꢀWRꢀ\RXUꢀRSHUDWRU¶Vꢀ  
manual for string head installation and maintenance instructions.  
‡ꢀꢀ $OO6%ꢃ6HULHVDQG352ꢀ$77$&+0(176(5,(66SOLW6KDIWDWWDFKPHQWVFDUU\WKHVDPHZDUUDQW\GXUDWLRQDVWKHXQLWVWKH\DUHꢀ  
GHVLJQHGꢀWRꢀ¿Wꢁ  
COMMERCIAL APPLICATION  
‡ꢀꢀ 1 YEAR WARRANTY - All Chain Saws, QuikVent Saws, and Cut-Off Saws for commercial, institutional, agricultural, industrial, or income  
producing use will be covered by this limited warranty for one ꢀꢇꢂꢃ\HDU from the date of purchase.  
‡ꢀꢀ 2 YEAR WARRANTY - All other units for commercial, institutional, agricultural, industrial, or income producing use will be covered by this  
limited warranty for two ꢀꢈꢂꢃ\HDUV from the date of purchase.  
EXCEPTIONS:  
‡ꢀ )RUꢀWZRꢃVWURNHꢀHQJLQHꢀSRZHUHGꢀSURGXFWVꢂꢀWKHꢀHOHFWURQLFꢀLJQLWLRQꢀPRGXOHꢂꢀÀH[LEOHꢀGULYHꢀFDEOHVꢂꢀ650ꢀVROLGꢀGULYHꢀVKDIWVꢀDQGꢀ7&ꢀWLQHVꢂꢀ  
are warranted for the OLIHꢄ of the product on parts only.  
‡ꢀ &XWWLQJꢀDWWDFKPHQWVꢀVXFKꢀDVꢂꢀEXWꢀQRWꢀOLPLWHGꢀWRꢂꢀEDUVꢂꢀFKDLQVꢂꢀVSURFNHWVꢂꢀEODGHVꢂꢀDQGꢀQ\ORQꢀWULPPHUꢀKHDGVꢀIRUꢀFRPPHUFLDOꢂꢀLQVWLWXWLRQDOꢂꢀ  
agricultural, industrial, rental, or income producing will be covered for failures due to defects in material or workmanship for a period  
of ꢉꢆꢃGD\V from original product purchase date. Any misuse from contact with concrete, rocks, or other structures is not covered by  
this warranty.  
‡ꢀꢀ (&+2¶Vꢀ5DSLGꢀ/RDGHUꢀ6WULQJꢀ+HDGꢀFDUULHVꢀDꢀOLIHWLPHꢀZDUUDQW\ꢀRQꢀWKHꢀOLQHꢀORFNLQJꢀV\VWHPꢂꢀSDUWVꢀRQO\ꢄꢀQRꢀODERUꢁꢀ5HIHUꢀWRꢀ\RXUꢀRSHUDWRU¶Vꢀ  
manual for string head installation and maintenance instructions.  
‡ꢀꢀ $OO6%ꢃ6HULHVDQG352ꢀ$77$&+0(176(5,(66SOLW6KDIWDWWDFKPHQWVFDUU\WKHVDPHZDUUDQW\GXUDWLRQDVWKHXQLWVWKH\DUHꢀ  
GHVLJQHGꢀWRꢀ¿Wꢁ  
RENTAL APPLICATION - 90 DAYS WARRANTY  
‡ꢀꢀ8QLWVꢀIRUꢀUHQWDOꢀXVHꢀZLOOꢀEHꢀFRYHUHGꢀDJDLQVWꢀGHIHFWVꢀLQꢀPDWHULDOꢀDQGꢀZRUNPDQVKLSꢀIRUꢀDꢀSHULRGꢀRIꢀꢅꢆꢀGD\VꢀIURPꢀWKHꢀGDWHꢀRIꢀSXUFKDVHꢁꢀ  
ꢀꢀ (&+2¶VꢀOLDELOLW\ꢀXQGHUꢀWKHꢀ³/LIHWLPH´ꢀFRYHUDJHꢀLVꢀOLPLWHGꢀWRꢀIXUQLVKLQJꢀSDUWVꢀVSHFL¿HGꢀXQGHUꢀWKHꢀ352'8&7ꢀ:$55$17<ꢀ3(5,2' section of  
this warranty statement for ³/LIH´ꢀIUHHꢀRIꢀFKDUJHꢀIRUꢀDꢀSHULRGꢀRIꢀWHQꢀꢇꢈꢆꢉꢀ\HDUVꢀDIWHUꢀWKHꢀGDWHꢀRIꢀWKHꢀFRPSOHWHꢀXQLW¶Vꢀ¿QDOꢀSURGXFWLRQꢁꢀ  
30  
X7502026303  
© 6/2014 ECHO Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PE-266/S  
WARRANTY STATEMENTS  
PURCHASED REPAIR PARTS, SHORT BLOCKS AND ACCESSORIES  
‡ꢀꢀꢅꢆꢃGD\ꢀUHVLGHQWLDOꢂꢀRUꢀQRQꢃLQFRPHꢀSURGXFLQJꢀZDUUDQW\  
‡ꢀꢀꢊꢆꢃGD\ꢀFRPPHUFLDOꢂꢀLQVWLWXWLRQDOꢂꢀDJULFXOWXUDOꢂꢀLQGXVWULDOꢂꢀLQFRPHꢀSURGXFLQJꢂꢀRUꢀUHQWDOꢀDSSOLFDWLRQꢀZDUUDQW\ꢀꢀ  
ATTENTION TWO-STROKE ENGINE POWER PRODUCT OWNERS  
This ECHO two-stroke engine power product is a quality-engineered unit which has been manufactured to exact tolerances to provide superior  
performance. To help ensure the performance of the unit, it is required to use two-stroke oil which meets the ISO-L-EGD Standard per ISO/CD  
13738 and JASO M345FD Standards. (&+2ꢃ3RZHUꢃ%OHQGŒꢃ7ZRꢊ6WURNHꢃ2LO LVꢀDꢀSUHPLXPꢀWZRꢃVWURNHꢀRLOꢀVSHFL¿FDOO\ꢀIRUPXODWHGꢀWRꢀPHHWꢀ,62ꢃ  
L-EGD (ISO/CD 13738) and JASO M345FD Standards. The use of two-stroke oils designed for other applications, such as for outboard motors  
or lawnmowers can result in severe engine damage, and will void your two-stroke engine limited warranty.  
THIS WARRANTY DOES NOT COVER DAMAGE CAUSED BY:  
‡ꢀ  
/DFNꢀRIꢀOXEULFDWLRQꢀRUꢀHQJLQHꢀIDLOXUHꢂꢀGXHꢀWRꢀWKHꢀXVHꢀRIꢀWZRꢃVWURNHꢀRLOVꢀthat do not meet the ISO-L-EGD (ISO/CD 13738) and JASO M345FD  
Standards. Engine problems due to inadequate lubrication caused by failure to use an ISO-L-EGD compliant and JASO M345FD registered  
oil, will void the two-stroke engine limited warranty. (&+23RZHU%OHQGŒ7ZRꢃ6WURNH2LO meets the ISO-L-EGD and JASO M345FD  
Standard. Emission related parts are covered for 5 years residential use or 2 years commercial use regardless of two-stroke oil used, per  
the statement listed in the EPA or California Emission Defect Warranty Explanation.  
'DPDJHꢀFDXVHGꢀE\ꢀXVHꢀRIꢀJDVRKROꢂꢀFRQWDLQLQJꢀPHWKDQROꢀꢇZRRGꢀDOFRKROꢉꢂꢀRUꢀJDVROLQHꢀFRQWDLQLQJꢀOHVVꢀWKDQꢀꢋꢅꢀRFWDQH. Only use gasoline which  
contains ꢋꢅꢀRFWDQHꢀRUꢀKLJKHU. Gasohol which contains a PD[LPXPꢀꢈꢆꢌꢀHWKDQROꢀꢇJUDLQꢀDOFRKROꢉꢀRUꢀꢈꢍꢌꢀ07%(ꢀꢇPHWK\OꢎWHUWLDU\ꢎEXW\OꢎHWKHUꢉꢀ  
is also approved. The prescribed mixing ratio of gasoline to oil is listed on the ECHO oil label and covered in your operator’s manual.  
(QJLQHꢀGDPDJHꢀFDXVHGꢀE\ꢀXVHꢀRIꢀHWKHUꢀRUꢀDQ\ꢀVWDUWLQJꢀÀXLGVꢁꢀꢀ  
'DPDJHꢀFDXVHGꢀE\ꢀWDPSHULQJꢀZLWKꢀHQJLQHꢀVSHHGꢀJRYHUQRUꢀRUꢀHPLVVLRQꢀFRPSRQHQWVꢂꢀRUꢀUXQQLQJꢀHQJLQHVꢀDERYHꢀVSHFL¿HGꢀDQGꢀUHFRPPHQGHGꢀ  
engine speeds as listed in your operator’s manual.  
‡ꢀ  
‡ꢀ  
‡ꢀ  
‡ꢀ  
‡ꢀ  
‡ꢀ  
2SHUDWLRQꢀRIꢀWKHꢀXQLWꢀZLWKꢀLPSURSHUO\ꢀPDLQWDLQHGꢎUHPRYHGꢀFXWWLQJꢀVKLHOGꢀRUꢀUHPRYHGꢎGDPDJHGꢀDLUꢀ¿OWHUꢁꢀꢀ  
'DPDJHꢀFDXVHGꢀE\ꢀGLUWꢂꢀSUHVVXUHꢀRUꢀVWHDPꢀFOHDQLQJꢀWKHꢀXQLWꢂꢀVDOWꢀZDWHUꢂꢀFRUURVLRQꢂꢀUXVWꢂꢀYDUQLVKꢂꢀDEUDVLYHVꢂꢀDQGꢀPRLVWXUHꢁ  
'HIHFWVꢂꢀPDOIXQFWLRQVꢀRUꢀIDLOXUHVꢀUHVXOWLQJꢀIURPꢀDEXVHꢂꢀPLVXVHꢂꢀQHJOHFWꢂꢀPRGL¿FDWLRQVꢂꢀDOWHUDWLRQVꢂꢀQRUPDOꢀZHDUꢂꢀLPSURSHUꢀVHUYLFLQJꢂꢀRUꢀXVHꢀ  
of unauthorized attachments.  
‡ꢀ  
‡ꢀ  
,QFRUUHFWꢀVWRUDJHꢀSURFHGXUHVꢂꢀVWDOHꢀIXHOꢂꢀLQFOXGLQJꢀIDLOXUHꢀWRꢀSURYLGHꢀRUꢀSHUIRUPꢀUHTXLUHGꢀPDLQWHQDQFHꢀVHUYLFHVꢀDVꢀSUHVFULEHGꢀLQꢀWKHꢀRSHUDWRUꢏVꢀ  
manual. Preventative maintenance as outlined in the operators manual is the customer’s responsibility.  
)DLOXUHVꢀGXHꢀWRꢀLPSURSHUꢀVHWꢃXSꢂꢀSUHꢃGHOLYHU\ꢀVHUYLFHꢀRUꢀUHSDLUꢀVHUYLFHꢀE\ꢀDQ\RQHꢀRWKHUꢀWKDQꢀDXWKRUL]HGꢀ(&+2ꢀVHUYLFLQJꢀGHDOHUꢀGXULQJꢀWKHꢀ  
warranty period.  
&HUWDLQꢀparts and other items are not warranted, including but not limited to: lubricants, starter cords, and engine tune-ups.  
8VHRIVSDUNSOXJVRWKHUWKDQWKRVHPHHWLQJSHUIRUPDQFHDQGGXUDELOLW\UHTXLUHPHQWVRIWKH2(0VSDUNSOXJOLVWHGLQWKH2SHUDWRUꢏVꢀ  
Manuals.  
2YHUKHDWLQJꢀRUꢀFDUERQꢀVFRULQJꢀIDLOXUHVꢀGXHꢀWRꢀUHVWULFWHGꢂꢀFORJJHGꢀH[KDXVWꢀSRUWꢀRUꢀFRPEXVWLRQꢀFKDPEHUꢂꢀLQFOXGLQJꢀGDPDJHꢀWRꢀVSDUNꢀDUUHVWHUꢀ  
screen.  
‡ꢀ  
‡ꢀ  
‡ꢀ  
‡ꢀ  
‡ꢀ  
$GMXVWPHQWVꢀDIWHUꢀWKHꢀ¿UVWꢀꢇꢊꢆꢉꢀWKLUW\ꢀGD\VꢀDQGꢀEH\RQGꢂꢀVXFKꢀDVꢀFDUEXUHWRUꢀDGMXVWPHQWꢀDQGꢀWKURWWOHꢀFDEOHꢀDGMXVWPHQWꢁꢀ  
'DPDJHꢀWRꢀJHDUVꢀRUꢀJHDUꢀFDVHVꢀFDXVHGꢀE\ꢀFRQWDPLQDWHGꢀJUHDVHꢀRUꢀRLOꢂꢀXVHꢀRIꢀLQFRUUHFWꢀW\SHꢀRUꢀYLVFRVLW\ꢀRIꢀOXEULFDQWVꢂꢀDQGꢎRUꢀIDLOXUHꢀWRꢀFRPSO\ꢀ  
with recommended grease or oil change intervals.  
‡ꢀ  
‡ꢀ  
‡ꢀ  
'DPDJHꢀFDXVHGꢀE\ꢀORDGLQJꢀ6+5('ꢀꢏ1ꢏꢀ9$&® beyond recommended capacity.  
'DPDJHꢀFDXVHGꢀE\ꢀSXPSꢀRUꢀVSUD\HUꢀUXQQLQJꢀGU\ꢂꢀSXPSLQJꢀRUꢀVSUD\LQJꢀFDXVWLFꢀRUꢀÀDPPDEOHꢀPDWHULDOVꢂꢀRUꢀODFNꢀRIꢀRUꢀEURNHQꢀVWUDLQHUVꢁꢀ  
$GGLWLRQDOꢀGDPDJHꢀWRꢀSDUWVꢀRUꢀFRPSRQHQWVꢀGXHꢀWRꢀFRQWLQXHGꢀXVHꢀDIWHUꢀRSHUDWLRQDOꢀSUREOHPꢀRUꢀIDLOXUHꢀRFFXUVꢁꢀ6KRXOGꢀRSHUDWLRQDOꢀSUREOHPꢀRUꢀ  
failure occur, the product should not be used, but delivered as is to an authorized ECHO servicing dealer.  
It is a dealer’s and/or customer’s responsibility to complete and return the warranty registration card supplied with your ECHO product or by visiting  
WWW.ECHO-USA.COMꢁꢀ<RXUꢀUHFHLSWꢀRIꢀSXUFKDVHꢀLQFOXGLQJꢀGDWHꢂꢀPRGHOꢀDQGꢀVHULDOꢀQXPEHUꢀPXVWꢀEHꢀPDLQWDLQHGꢀDQGꢀSUHVHQWHGꢀWRꢀDQꢀDXWKRUL]HGꢀ  
ECHO servicing dealer for warranty service. Proof of purchase rests solely with the customer. Some states do not allow limitations on how long  
an implied warranty lasts, so the above limitations may not apply to you. Some states do not allow the exclusion or limitation of incidental or  
FRQVHTXHQWLDOꢀGDPDJHVꢂꢀVRꢀ\RXꢀPD\ꢀDOVRꢀKDYHꢀRWKHUꢀVSHFL¿FꢀOHJDOꢀULJKWVꢀZKLFKꢀYDU\ꢀIURPꢀVWDWHꢀWRꢀVWDWHꢁꢀ7KLVꢀOLPLWHGꢀZDUUDQW\ꢀLVꢀJLYHQꢀE\ꢀ(&+2ꢀ  
Incorporated, 400 Oakwood Rd., Lake Zurich, IL 60047.  
DISCLAIMER OF IMPLIED WARRANTIES  
7KLVꢀOLPLWHGꢀZDUUDQW\ꢀLVꢀLQꢀOLHXꢀRIꢀDOOꢀRWKHUꢀH[SUHVVHGꢀRUꢀLPSOLHGꢀZDUUDQWLHVꢂꢀLQFOXGLQJꢀDQ\ꢀZDUUDQW\ꢀRIꢀ),71(66ꢀ)25ꢀ$ꢀ3$57,&8/$5ꢀ385326(ꢀ  
OR USE and any implied warranty of MERCHANTABILITYꢀRWKHUZLVHꢀDSSOLFDEOHꢀWRꢀWKLVꢀSURGXFWꢁꢀ(&+2ꢀDQGꢀLWVꢀDI¿OLDWHGꢀFRPSDQLHVꢀVKDOOꢀQRWꢀEHꢀ  
OLDEOHꢀIRUꢀDQ\ꢀVSHFLDOꢀLQFLGHQWDOꢀRUꢀFRQVHTXHQWLDOꢀGDPDJHꢂꢀLQFOXGLQJꢀORVWꢀSUR¿WVꢁꢀ7KHUHꢀDUHꢀQRꢀZDUUDQWLHVꢀH[WHQGHGꢀRWKHUꢀWKDQꢀDVꢀSURYLGHGꢀKHUHLQꢁꢀ  
7KLVꢀOLPLWHGꢀZDUUDQW\ꢀPD\ꢀEHꢀPRGL¿HGꢀRQO\ꢀE\ꢀ(&+2ꢁ  
99922201032  
11/18/2011  
X7502026303  
31  
© 6/2014 ECHO Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
T42811001001/T42811999999  
T42912001001/T42912999999  
(S) T43611001001/T43611999999  
(S) T43712001001/T43712999999  
ECHO, INCORPORATED  
400 Oakwood Road  
Lake Zurich, IL 60047  
www.echo-usa.com  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  

E&J Wheelchair Traveler HTC User Manual
EdgeStar Air Conditioner AP14009COM User Manual
Edimax Technology Satellite TV System EA MARS User Manual
Everpure Water System CG53 20S User Manual
Extron electronic TV Cables DTP T HWP 231 D User Manual
FujiFilm Camcorder 16117300 User Manual
Fundex Games Games Old Maid User Manual
Furuno Radar Detector FCV 1200BB User Manual
GarrettCom Switch Magnum 6KQ User Manual
GE Microwave Oven 164D2966P127 I User Manual